O-RING GUIDE · Chloroprene Rubber CR CR Isobutene Isoprene Rubber (Butyl Rubber) IIR Chlorobutyl Rubber CIIR CIIR ... properties even though they are still considered elastomers

O-RING GUIDE

// ZATKOFF.COM

2

WARNING:

OFFER OF SALE

These products can expose you to chemicals including carbon black (airborne and extracts), antimony trioxide, titanium dioxide, silica (crystalline), di(2-ethylhexyl)phthalate, ethylene thiourea, acrylonitrile, 1,3-butadiene, epichlorohydrin, toluenediisocyanate, tetra uoroethylene, ethylbenzene, formaldehyde, furfuryl alcohol, glass fi bers, methyl isobutyl ketone, nickel (metallic and compounds), lead and lead compounds which are known to the State of California to cause cancer; and 1,3-butadiene, epichlorohydrin, di(2-ethylhexyl)phthalate, di-isodecyl phthalate, ethylene thiourea, methyl isobutyl ketone, methanol, toluene, lead and lead compounds which are known to the State of California to cause birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The items described in this document are hereby offered for sale by Zatkoff Seals & Packings. This offer and its acceptance are governed exclusively by the provisions contained in Zatkoff Seals & Packings’ “Offer of Sale” located at www.zatkoff.com/terms.

Copyright © 2019, Zatkoff Seals & Packings, Farmington Hills, MI. All rights reserved.

Failure, improper selection or improper use of the products and/or systems described herein or related items may cause death, personal injury or property damage.

This document and other information from Zatkoff Seals & Packings provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these

products or systems, the user, through his or her own analysis and testing, is solely responsible for making the fi nal selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifi cations, designs, availability and pricing, are subject to change by Zatkoff Seals & Packings at any time.

Table of Contents

Material Offering 4Engineering Tools 27Gland Designs 36 Sizing Charts 46Metric O-Rings 64O-Ring Kits 128

3

O-RING GUIDE

// ZATKOFF.COM

4 MATERIAL OFFERING

Material OfferingElastomersThe basic core polymer of an elastomeric compound is called a rubber, produced either as natural gum rubber in the wild, on commercial rubber plantations or manufactured synthetically by the chemical industry. Today, more than 32 synthetic rubbers are known, the most important ones are listed on page 5.

Modern elastomeric sealing compounds generally contain 50 to 60% base polymer and are often described simply as “rubber.” The balance of an elastomer compound consists of various fillers, vulcanizing agents, accelerators, aging retardants and other chemical additives which modify and improve the basic physical properties of the base polymer to meet the particular requirements of a specific application.

Elastomers used in producing seals, and particularly those used in O-rings, will usually provide reliable, leak-free function if fundamental design requirements are observed.

“Cross-linking” between the polymer chains is formed during the vulcanization process, see “Schematic Representation of Polymer Chains Before and After Vulcanization.” Cross-linking of the molecules changes the rubber from a plastic-like material to an elastic material.

After vulcanization, including any required “post-cure,” an elastomer compound attains the physical properties required for a good sealing material. As with all chemical reactions, temperature is responsible for the speed of reaction. Only when the ideal process temperature is constant during the entire vulcanization time, will the optimum degree of curing be reached. For this reason, the conditions of vulcanization are closely controlled and recorded as part of the Parker quality assurance process.

Introduction to ElastomersBefore reviewing the available elastomers and their general properties, it is necessary to fully understand the terms “polymer,” “rubber,” “elastomer” and “compound” as they are used in this handbook.

PolymerA polymer is the “result of a chemical linking of molecules into a long chain-like structure.” Both plastics and elastomers are classified as polymers. In this handbook, polymer generally refers to a basic class of elastomer, members of which have similar chemical and physical properties. O-rings are made from many polymers, but a few polymers account for the majority of O-rings produced, namely Nitrile, EPDM and Neoprene.

Schematic Representation of Polymer Chains Before and After Vulcanization

Synthetic Rubber

Chemical Name

AbbreviationDIN/ISO

1629ASTM D1418

M-Group (saturated carbon molecules in main macro-molecule chain):

Polyacrylate Rubber ACM ACMEthylene Acrylate — AEMChlorosulfonated Polyethylene Rubber CSM CSMEthylene Propylene Diene Rubber EPDM EPDMEthylene Propylene Rubber EPDM EPMFluorocarbon Rubber FPM FKMTetrafluorethylene Propylene Copolymer FEPM FEPMPerfluorinated Elastomer — FFKM

O-Group (with oxygen molecules in the main macro-molecule chain):

Epichlorohydrin Rubber CO COEpichlorohydrin Copolymer Rubber ECO ECO

R-Group (unsaturated hydrogen carbon chain):

Butadiene Rubber BR BRChloroprene Rubber CR CRIsobutene Isoprene Rubber (Butyl Rubber) IIR IIRChlorobutyl Rubber CIIR CIIRIsoprene Rubber IR IRNitrile Butadiene Rubber NBR NBRStyrene Butadiene Rubber SBR SBRHydrogenated Nitrile — HNBRCarboxylated Nitrile XNBR XNBR

Q-Group (with Silicone in the main chain):

Fluorosilicone Rubber FMQ FVMQMethyl Phenyl Silicone Rubber PMQ PMQMethyl Phenyl Vinyl Silicone Rubber PMVQ PVMQMethyl Silicone Rubber MQ MQMethyl Vinyl Silicone Rubber VMQ VMQ

Elastomerno cross-links

Elastomercross-linked

U-Group (with carbon, oxygen and nitrogen in the main chain):

Polyester Urethane AU AUPolyether Urethane EU EU

The Most Important Types of Synthetic Rubber, TheirGroupings and Abbreviations

5MATERIAL OFFERING

Synthetic Rubber

Chemical Name

AbbreviationDIN/ISO

1629ASTM D1418

M-Group (saturated carbon molecules in main macro-molecule chain):

Polyacrylate Rubber ACM ACMEthylene Acrylate — AEMChlorosulfonated Polyethylene Rubber CSM CSMEthylene Propylene Diene Rubber EPDM EPDMEthylene Propylene Rubber EPDM EPMFluorocarbon Rubber FPM FKMTetrafluorethylene Propylene Copolymer FEPM FEPMPerfluorinated Elastomer — FFKM

O-Group (with oxygen molecules in the main macro-molecule chain):

Epichlorohydrin Rubber CO COEpichlorohydrin Copolymer Rubber ECO ECO

R-Group (unsaturated hydrogen carbon chain):

Butadiene Rubber BR BRChloroprene Rubber CR CRIsobutene Isoprene Rubber (Butyl Rubber) IIR IIRChlorobutyl Rubber CIIR CIIRIsoprene Rubber IR IRNitrile Butadiene Rubber NBR NBRStyrene Butadiene Rubber SBR SBRHydrogenated Nitrile — HNBRCarboxylated Nitrile XNBR XNBR

Q-Group (with Silicone in the main chain):

Fluorosilicone Rubber FMQ FVMQMethyl Phenyl Silicone Rubber PMQ PMQMethyl Phenyl Vinyl Silicone Rubber PMVQ PVMQMethyl Silicone Rubber MQ MQMethyl Vinyl Silicone Rubber VMQ VMQ

Elastomerno cross-links

Elastomercross-linked

U-Group (with carbon, oxygen and nitrogen in the main chain):

Polyester Urethane AU AUPolyether Urethane EU EU

The Most Important Types of Synthetic Rubber, TheirGroupings and Abbreviations

6 MATERIAL OFFERING

RubberRubber-like materials first produced from sources other than rubber trees were referred to as “synthetic rubber.” This distinguished them from natural gum rubber. Since then, usage in the industry has broadened the meaning of the term “rubber” to include both natural as well as synthetic materials having rubber-like qualities. This handbook uses the broader meaning of the word “rubber.”

ElastomerThough “elastomer” is synonymous with “rubber,” it is formally defined as a “high molecular weight polymer that can be, or has been modified, to a state exhibiting little plastic flow and rapid, nearly complete recovery from an extending or compressing force.” In most instances we call such material before modification “uncured” or “unprocessed” rubber or polymer.When the basic high molecular weight polymer, without the addition of plasticizers or other dilutents, is converted by appropriate means to an essentially non-plastic state and tested at room temperature, it usually meets the following requirements in order to be called an elastomer:

A. It must not break when stretched approximately 100%.B. After being held for five minutes at 100% stretch, it must retract to within 10% of its

original length within five minutes of release.

Note: Extremely high hardness/modulus materials generally do not exhibit these properties even though they are still considered elastomers. The American Society for Testing and Materials (ASTM) uses these criteria to define the term “elastomer.”

CompoundA compound is a mixture of base polymer and other chemicals that form a finished rubber material. More precisely, a compound refers to a specific blend of chemical ingredients tailored for particular required characteristics to optimize performance in some specific service.The basis of compound development is the selection of the polymer type. There may be a dozen or more different ones to choose from. The rubber compounder may then add various reinforcing agents such as carbon black, curing or vulcanizing agents (such as sulfur or peroxide, activators, plasticizers, accelerators, antioxidants, or antiozonants) to the elastomer mixture to tailor it into a seal compound with its own distinct physical properties. Since compounders have thousands of compounding ingredients at their disposal, it seems reasonable to visualize two, three, or even one hundred-plus compounds having the same base elastomer, yet exhibiting marked performance differences in the O-ring seal.

The terms “compound” and “elastomer” are often used interchangeably in a more general sense. This usage usually references a particular type or class of materials such as “nitrile compounds” or “butyl elastomers.” Please remember that when one specific compound is under discussion in this handbook, it is a blend of various compounding ingredients (including one or more base elastomers) with its own individual characteristics and identification in the form of a unique compound number, For example, N0674-70 or V1164-75.

Influence of the Acrylonitrile Content

IRM 903 oi l cold flexibility

Swelling

Swelling inIRM 903 oil

coldflexibility

Acrylonitrile Content in %20 30 40 50

saercnIe

rceDaese

7MATERIAL OFFERING

Basic Elastomers for O-Ring SealsThe following paragraphs briefly review the various elastomers currently available for use in O-rings and other elastomeric seals. If any of the rubber terms used in the descriptions are confusing, consult the “Glossary of Seal and Rubber Terms” in the Zatkoff Product catalog. Service recommendations mentioned in this section are necessarily abbreviated. For more comprehensive and specific information on this important subject, see the Zatkoff Product catalog.

Acrylonitrile-Butadiene (NBR)Nitrile rubber (NBR) is the general term for acrylonitrile butadiene copolymer. The acrylonitrile content of nitrile sealing compounds varies considerably (18% to 50%) and influences the physical properties of the finished material.The higher the acrylonitrile content, the better the resistance to oil and fuel. At the same time, elasticity and resistance to compression set is adversely affected. In view of these opposing realities, a compromise is often drawn, and a medium acrylonitrile content selected. NBR has good mechanical properties when compared with other elastomers and high wear resistance. NBR is not resistant to weathering and ozone.

Heat resistance:• Up to 100°C (212°F) with shorter life @ 121°C (250°F)

Cold flexibility:• Depending on individual compound, between -34°C and -57°C (-30°F and -70°F)

Chemical resistance:• Aliphatic hydrocarbons (propane, butane, petroleum oil, mineral oil and grease,

diesel fuel, fuel oils) vegetable and mineral oils and greases• HFA, HFB and HFC hydraulic fluids• Dilute acids, alkali and salt solutions at low temperatures• Water (special compounds up to 100°C) (212°F)

Not compatible with:• Fuels of high aromatic content (for flex fuels a special compound must be used)• Aromatic hydrocarbons (benzene)• Chlorinated hydrocarbons (trichloroethylene)• Polar solvents (ketone, acetone, acetic acid, ethylene-ester)• Strong acids• Brake fluid with glycol base• Ozone, weather, and atmospheric aging

Carboxylated Nitrile (XNBR)

Carboxylated Nitrile (XNBR) is a special type of nitrile polymer that exhibits enhanced tear and abrasion resistance. For this reason, XNBR based materials are often specified for dynamic applications such as rod seals and rod wipers.

Heat resistance:• Up to 100°C (212°F) with shorter life @ 121°C (250°F)

8 MATERIAL OFFERING

Cold flexibility:• Depending on individual compound,

between -18°C and -48°C (0°F and -55°F)

Chemical resistance:• Aliphatic hydrocarbons (propane, butane,

petroleum oil, mineral oil and grease, diesel fuel, fuel oils) vegetable and mineral oils and greases

• HFA, HFB and HFC hydraulic fluids• Many diluted acids, alkali, and salt

solutions at low temperatures

Not compatible with:• Fuels of high aromatic content (for flex

fuels a special compound must be used)• Aromatic hydrocarbons (benzene)• Chlorinated hydrocarbons (trichloroethylene)• Polar solvents (ketone,acetone,acetic

acid,ethylene-ester)• Strong acids• Brake fluid with glycol base• Ozone, weather, and atmospheric aging

Ethylene Acrylate (AEM, Vamac®)

Ethylene acrylate is a terpolymer of ethylene and methyl acrylate with the addition of a small amount of carboxylated curing monomer. Ethylene acrylate rubber is not to be confused with polyacrylate rubber (ACM).

Heat resistance:• Up to 149°C (300°F) with shorter life

up to 163°C (325°F)

Cold flexibility:• Between -29°C and -40°C (-20°F and -40°F)

Chemical resistance:• Ozone• Oxidizing media• Moderate resistance to mineral oils

Not compatible with:• Ketones• Fuels• Brake fluids

Ethylene Propylene Rubber (EPR, EPDM)

EPR copolymer ethylene propylene and ethylene-propylene-diene rubber (EPDM) terpolymer are particularly useful when sealing phosphate-ester hydraulic fluids and in brake systems that use fluids having a glycol base.

Heat resistance:• Up to 150°C (302°F) (max. 204°C

(400°F)) in water and/or steam

Cold flexibility:• Down to approximately -57°C (-70°F)

Chemical resistance:• Hot water and steam up to 149°C (300°F)

with special compounds up to 260°C (500°F)• Glycol based brake fluids (Dot 3 & 4) and silicone-

based brake fluids (Dot 5) up to 149°C (300°F)• Many organic and inorganic acids• Cleaning agents, sodium, and potassium alkalis• Phosphate-ester based hydraulic fluids (HFD-R)• Silicone oil and grease• Many polar solvents (alcohols, ketones, esters)• Ozone, aging, and weather resistant

Not compatible with:• Mineral oil products (oils, greases, and fuels)

Butyl Rubber (IIR)

Butyl (isobutylene, isoprene rubber, IIR) has a very low permeability rate and good electrical properties.

Heat resistance:• Up to approximately 121°C (250°F)

Cold flexibility:• Down to approximately -59°C (-75°F )

Chemical resistance:• Hot water and steam up to 121°C (250°F)• Brake fluids with glycol base (Dot 3 & 4)• Many acids• Salt solutions• Polar solvents, (e.g. alcohols, ketones, and esters)• Silicone oil and grease

9MATERIAL OFFERING

• Polyglycol-based hydraulic fluids (HFC fluids)and phosphate-ester bases (HFD-R fluids)

• Ozone, aging, and weather resistant

Not compatible with:• Mineral oil and grease• Fuels• Chlorinated hydrocarbons

Chloroprene Rubber (CR)

Chloroprene was the first synthetic rubber developed commercially and exhibits generally good ozone, aging, and chemical resistance. It has good mechanical properties over a wide temperature range.



Chemical resistance:• Paraffin based mineral oil with low DPI,

e.g. ASTM oil No. 1• Silicone oil and grease• Water and water solvents at low temperatures• Refrigerants• Ammonia• Carbon dioxide• Improved ozone, weathering, and

aging resistance compared with nitrile

Limited compatibility:• Naphthalene based mineral oil (IRM

902 and IRM 903 oils)• Low molecular weight aliphatic

hydrocarbons (propane, butane, fuel)• Glycol based brake fluidsNot compatible with:• Aromatic hydrocarbons (benzene)• Chlorinated hydrocarbons (trichloroethylene)• Polar solvents (ketones, esters, ethers)

Fluorocarbon (FKM)Fluorocarbon (FKM) has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics,

and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately -26°C (-15°F) although certain compounds are suitable down to -46°C (-50°F). Under dynamic conditions, the lowest service temperature is between -15°C and -18°C (5°F and 0°F).Gas permeability is very low and similar to that of butyl rubber. Special FKM compounds exhibit an improved resistance to acids and fuels.

Heat resistance:• Up to 204°C (400°F) and higher temperatures

with shorter life expectancy

Cold flexibility:• Down to -26°C (-15°F) (some to -46°C) (-50°F)

Chemical resistance:• Mineral oil and grease, ASTM oil No. 1,

IRM 902, and IRM 903 oils• Non-flammable hydraulic fluids (HFD)• Silicone oil and grease• Mineral and vegetable oil and grease • Aliphatic hydrocarbons (butane,

propane, natural gas)• Aromatic hydrocarbons (benzene, toluene)• Chlorinated hydrocarbons (trichloroethylene

and carbon tetrachloride)• Gasoline (including high alcohol content)• High vacuum• Very good ozone, weather, and

aging resistance

Not compatible with:• Glycol based brake fluids• Ammonia gas, amines, alkalis• Superheated steam• Low molecular weight organic acids

(formic and acetic acids)

Fluorosilicone (FVMQ)

FVMQ contains trifluoropropyl groups next to the methyl groups. The mechanical and physical properties are very similar to VMQ. However, FVMQ offers improved fuel and mineral oil resistance but poor hot air resistance when compared with VMQ.

10 MATERIAL OFFERING

Heat resistance:• Up to 177°C (350°F) max.


Chemical resistance:• Aromatic mineral oils (IRM 903 oil)• Fuels• Low molecular weight aromatic

hydrocarbons (benzene, toluene)

Hydrogenated Nitrile (HNBR, HSN)

Hydrogenated nitrile is a synthetic polymer that results from the hydrogenation of nitrile rubber (NBR). Superior mechanical characteristics, particularly high strength, helps reduce extrusion and wear.

Heat resistance:• Up to 150°C (300°F)


Chemical resistance:• Aliphatic hydrocarbons• Vegetable and animal fats and oils• HFA, HFB, and HFC hydraulic fluids• Dilute acids, bases, and salt solutions

at moderate temperatures• Water and steam up to 149°C (300°F)• Ozone, aging, and weathering

Not compatible with:• Chlorinated hydrocarbons• Polar solvents (ketones, esters, and ethers)• Strong acids

Perfluoroelastomer (FFKM)

Perfluoroelastomer (FFKM) currently offers the highest operating temperature range, the most comprehensive chemical compatibility, and the lowest off-gassing and extractable levels of

any rubber material. Parker’s proprietary formulations deliver an extreme performance spectrum that make them ideal for use in critical applications like semiconductor chip manufacturing, jet engines, and chemical processing equipment.

Heat resistance:• Up to 320°C (608°F)

Cold flexibility:• -18°C to -26°C (0°F to -15°F)

Chemical resistance:• Aliphatic and aromatic hydrocarbons• Chlorinated hydrocarbons• Polar solvents (ketones, esters, ethers)• Inorganic and organic acids• Water and steam• High vacuum with minimal loss in weight

Not compatible with:• Fluorinated refrigerants (R11, 12, 13,

113, 114, etc.)• Perfluorinated lubricants (PFPE)

Polyacrylate (ACM)

ACM (acrylic rubber) has good resistance to mineral oil, oxygen, and ozone. Water compatibility and cold flexibility of ACM are significantly worse than with nitrile.


Cold flexibility:• Down to approximately -21°C (-5°F )

Chemical resistance:• Mineral oil (engine, gear box, ATF oil).• Ozone, weather, and aging

Not compatible with:• Glycol based brake fluid (Dot 3 and 4)• Aromatics and chlorinated hydrocarbons

11MATERIAL OFFERING

• Hot water, steam• Acids, alkalis, amines

Polyurethane (AU, EU)

Polyurethane elastomers, as a class, have excellent wear resistance, high tensile strength, and high elasticity in comparison with any other elastomers. Permeability is good and comparable with butyl.



Chemical resistance:• Pure aliphatic hydrocarbons

(propane, butane)• Mineral oil and grease• Silicone oil and grease• Water up to 50°C (125°F)

Not compatible with:• Ketones, esters, ethers, alcohols, glycols• Hot water, steam, alkalis, amines, acids

Silicone Rubber (Q, MQ, VMQ, PVMQ)

Silicones have good ozone and weather resistance as well as good insulating and physiologically neutral properties. However, silicone elastomers as a group, have relatively low tensile strength, poor tear strength, and little wear resistance.


special compounds up to 260°C (500°F)

Cold flexibility:• Down to approximately -54°C (-65°F) special

compounds down to -115°C (-175°F)

Chemical resistance:• Animal and vegetable oil and grease• High molecular weight chlorinated aromatic

hydrocarbons (including flame-resistant insulators and coolant for transformers)

• Moderate water resistance• Diluted salt solutions• Ozone, aging, and weather

Not compatible with:• Superheated water steam over 121°C (250°F)• Acids and alkalis• Low molecular weight chlorinated

hydrocarbons (trichloroethylene)• Hydrocarbon based fuels• Aromatic hydrocarbons (benzene, toluene)• Low molecular weight silicone oils

Tetrafluoroethylene - Propylene (AFLAS)

This elastomer is a copolymer of tetra-fluoroethylene (TFE) and propylene. Its chemical resistance is excellent across a wide range of aggressive media.


Cold flexibility:• Down to approximately -9°C (15°F)

Compatible with:• Bases• Phosphate Esters• Amines• Engine Oils• Steam and hot water• Pulp and paper liquors

Not compatible with:• Aromatic Fuels• Ketones• Chlorinated hydrocarbons


Compound Selection and Numbering SystemsThe base elastomer and the hardness of the finished product are the main factors which enable a given compound to resist heat, chemical, and other physical influences.The Parker compound code contains all the essential information needed to identify the polymer family as well as the special property description and hardness.

Polymer Codes:A = PolyacrylateB = ButylC = Chloroprene (Neoprene®)E = Ethylene-propyleneF = ULTRA™ FFKMH = Hifluor™K = HNBRL = FluorosiliconeN = Nitrile (Buna N) and HNBRP = PolyurethaneS = SiliconeV = Fluorocarbon, AFLAS®,

ULTRA™ and Hifluor™ Y = Epichlorohydrin Z = Exotic Polymers

Special Property Descriptions:In the Type II numbering system, the special property description is identified by a second letter

A = General PurposeB = Low Compression SetE = Ethylene Acrylate or (Vamac®)F = Fuel Resistant or Fully FluorinatedG = High Fluorine ContentJ = NSF/FDA/WRAS ApprovalsL = Internally LubedM = Mil/AMS SpecificationsP = Low Temperature Flexible or

(AFLAS)W = Non-Black CompoundX = Carboxylated

The shore hardness range of a compound is indicated by the suffix numbers, e.g. “70” means that the material’s hardness is 70±5 Shore A. The individual sequential compound number is shown between the suffix and the prefix. Note: There are two types of nomenclature used to reference Parker O-Ring Products. See Tables below for description of these types.

Type I: N = Polymer Code (Single Letter)0674 = Sequence Number (Four Digits)-70 = Durometer Indicator (Two Digits)

Type II: A = Polymer Code (Single Letter)A = Special Property Description (Single Letter)151 = Sequence Number (Three Digits)-70 = Durometer Indicator (Two Digits)

-40 40 ±5 Shore A Durometer-45 45 ±5 Shore A Durometer-50 50 ±5 Shore A Durometer-55 55 ±5 Shore A Durometer-60 60 ±5 Shore A Durometer-65 65 ±5 Shore A Durometer

-70 70 ±5 Shore A Durometer-75 75 ±5 Shore A Durometer-80 80 ±5 Shore A Durometer-85 85 ±5 Shore A Durometer-90 90 ±5 Shore A Durometer-95 95 ±5 Shore A Durometer

Durometer Indicators (Hardness)

13MATERIAL OFFERING

COMPOUND NO. RECOMMENDED FOR TEMP. RANGE(° F)

COLOR

AA150-70 Engines & Transmission Seals -5 to 350 Black


COLOR

AE152-70 Transmission Applications -40 to 325 Black

AE153-75 Transmission Applications, Internally Lubed

-40 to 325 Black


COLOR

C0267-50 AMS 3208, Low Temperature -60 to 250 Black

C0557-70 Drive Belt Applications, General Purpose

-35 to 250 Black

C0873-70 Refrigerant Gases, Low Extractibles, Low Compression Set

-35 to 225 Black

C1124-70 AMS 3209, Low Temperature -60 to 250 Black


COLOR

B0612-70 Vacuum, Low Compression Set -75 to 250 Black

Polyacrylate (ACM)ACM (acrylic rubber) has good resistance to mineral oil, oxygen, and ozone. The water compatibility and cold flexibility of ACM are considerably worse than with NBR.

Ethylene Acrylate (AEM)Ethylene acrylate is a mixed polymer of ethylene, methyl acrylate, and a small amount of carboxylated cure-site monomer. Developed as a lower-temperature version of Polyacrylate, but swells slightly more. Polymer is sold under the tradename VAMAC®.

Butyl Rubber (IIR)Butyl rubber (isobutylene-isoprene rubber or IIR) has a very low permeability rate and good electrical properties, but poor short-term rebound.

Polychloroprene Rubber (CR)Also known by the tradename Neoprene®, polychloroprene was the first synthetic rubber and exhibits generally good ozone, aging, and chemical resistance. It has good mechanical properties over a wide temperature range.



COLOR

EA454-50 General Purpose -70 to 250 Black

EB152-70 UL Listed -70 to 250 Black

E1157-60 General Purpose -70 to 250 Black

E1561-60 KTW, WRAS -70 to 250 Black

E0751-65 Drive Belt Applications -70 to 250 Black


E0667-70 Auto Disc Brakes -70 to 250 Black


E1244-70 NSF 61, Internally Lubed, USP VI -70 to 250 Black

E1549-70 WRAS,FDA -70 to 250 Black

E1583-70 NSF 51, Internally Lubed -70 to 250 Black

E3609-70 NSF 51, NSF 61, FDA, USP Class VI, ISO 10993

-70 to 250 Black

EJ274-70 Internally lubed, NSF 61, Chloramine Resistant

-70 to 250 Black

E0740-75 Nuclear Applications, USP VI, USP <87>

-70 to 250 Black

E0515-80 NAS 1613 Rev 2 -70 to 250 Black


E0893-80 General Purpose -70 to 250 Purple

EM163-80 NAS 1613 Rev 6 -80 to 250 Black

E0652-90 General Purpose, Back-Up Rings -60 to 250 Black

E0962-90 Excellent Steam to 500° F, ED Resistant

-60 to 250 Black

Ethylene Propylene Rubber (EPM, EPR, EPDM) EPM (EPR) is a copolymer of ethylene and propylene. EPDM is a terpolymer of ethylene, propylene, and a diene third monomer used for cross-linking.

15MATERIAL OFFERING

Fluorosilicone (FVMQ)Fluorosilicone is a silicone polymer chains with fluorinated side-chains for improved oil and fuel resistance. The mechanical and physical properties are very similar to those of silicone.COMPOUND NO. RECOMMENDED FOR TEMP. RANGE

(° F) COLOR

L1223-60 MIL-DTL-25988, TY 1, CL 1, GR 60, AMS 3325

-100 to 350 Blue

LM100-70 MIL-DTL-25988, TY I, CL I, GR 70, UL listed

-100 to 350 Blue

L1077-75 MIL-DTL-25988, TY I, CL III, GR 75 -90 to 350 Blue

L1218-80 MIL-DTL-25988, TY 1, CL 1, GR 80 -90 to 350 Blue

Acrylonitrile-Butadiene (NBR)Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene terpolymer. The acrylonitrile content of nitrile sealing compounds varies considerably (18 to 50%.) Polymers with higher ACN content exhibit less swell in gasoline and aromatic solvents, while lower ACN polymers exhibit better compression set and low temperature flexibility. Polymer is also called Buna-N.


COLOR

N0545-40 General Purpose -45 to 225 Black

N0299-50 UL listed -55 to 225 Black

N0525-60 AMS 3220 -25 to 250 Black

NM506-65 AMS 7271 -70 to 180 Black

N0103-70 Low Temp. -55 to 225 Black

N0497-70 Low Swell, SAE 120R1 CL ll, UL listed

-35 to 212 Black

N0602-70 General Purpose, AMS-P-5315, Low Temp.

-70 to 180 Black

N0674-70 General Purpose, MIL-G-21569, Cl I, UL listed

-30 to 250 Black

N0757-70 NSF 61, UL Listed -30 to 225 Black

N1220-70 NSF 51, FDA -30 to 225 Black

N1470-70 General Purpose, X-rings -40 to 250 Black

Continued on next page



COLOR

N1499-70 General Purpose, UL -30 to 250 Black

N1510-70 NSF 61 -30 to 225 Black

N1527-70 UL Listed -30 to 225 Black

NA151-70 UL Listed -60 to 180 Black

NM072-70 AMS-R-7362 -60 to 180 Black

N0756-75 AMS-P-83461 -65 to 250 Black

N0951-75 High Temp., Low Compression Set

-25 to 275 Black

N1500-75 Low Swell, UL Listed, Fuel applications

-35 to 212 Black

NM304-75 MIL-P-25732 -65 to 250 Black

N1090-85 “ELF” Pneumatic, Carboxylated, Internally Lubed

-25 to 225 Black

N0300-90 Back Up Rings -40 to 180 Black

N0507-90 AMS-P-5510, Low Temp. -65 to 180 Black

N0552-90 General Purpose -30 to 250 Black

N0702-90 Low Compression Set -30 to 275 Black

N1059-90 Low Compression Set -30 to 275 Black

N1444-90 Parbaks only -30 to 250 BlackN1490-90 General Purpose -30 to 250 Black

Hydrogenated Nitrile (HNBR, HSN)Hydrogenated nitrile was developed as an air-resistant variant of nitrile rubber. In HNBR, the carbon-carbon double bonds in the main polymer chain are saturated with hydrogen atoms in a process called “hydrogenation” that improves the material’s thermal stability and oxidation resistance.COMPOUND NO. RECOMMENDED FOR TEMP. RANGE

(° F) COLOR

N1173-70 General Purpose -25 to 300 BlackKA158-70 Low Temp. -40 to 300 Black

KA157-70 General Purpose -30 to 300 Black

N1231-80 Explosive Decompression -25 to 300 Black


Acrylonitrile-Butadiene (NBR)

17MATERIAL OFFERING


COLOR

KA453-80 Low Swell, ED Resistant -25 to 300 BlackKB162-80 Oilfield, High Temp. Hydraulics -25 to 300 BlackKA183-85 Low Temp. -55 to 300 BlackKB163-90 Oilfield, High Temp. Hydraulics,

RGD Resistant, NORSOK M710-25 to 300 Black

Silicone Rubber (VMQ, PVMQ)Silicones possess good insulating properties and tend to be physiologically neutral. But, silicone elastomers have relatively low tensile strength, poor tear and wear resistance.COMPOUND NO. RECOMMENDED FOR TEMP. RANGE

(° F) COLOR

S0469-40 AMS 3301, USP Class VI, A-A-59588 CL 2a, 2b, GR 40

-75 to 400 Rust

S0595-50 AMS 3302 -70 to 400 RustS0317-60 FDA, USDA, USP CL VI -103 to 450 RustS0613-60 A-A-59588 CL 2b, Gr 60, AMS

3303-60 to 450 Rust

S0383-70 A-A-59588 CL 1a, 1b, GR 70, AMS 3337

-175 to 400 Rust

S0455-70 High Temperature -65 to 450 RustS0604-70 A-A-59588 Cl 2a, 2b, Gr

70, AMS 3304, AMS 3357, MIL-G-21569 Class 2, UL

-65 to 450 Rust

S1138-70 FDA, USP Class VI, USP <87> -60 to 400 RustS0614-80 A-A-59588 CL 2a, 2b, GR 80,

AMS 3305-65 to 450 Rust

Fluorocarbon (FKM, FPM)Fluorocarbon (FKM) has excellent resistance to high temperature and a broad range of chemicals. Permeability and compression set are excellent.COMPOUND NO. RECOMMENDED FOR TEMP. RANGE

(° F) COLOR

V0986-50 General Purpose -15 to 400 BrownV0769-60 General Purpose -15 to 400 BlackVG271-65 Automotive Fuel Applications -15 to 400 Black

VW252-65 Low Swell -15 to 400 GreenV0680-70 FDA, USDA, NSF 51, USP Class VI -15 to 400 RedVA179-70 FKM for High Temp. Engines -10 to 437 Black


Hydrogenated Nitrile (HNBR, HSN)



COLOR

VB185-70 Acid Resistant, Steam, B type -15 to 400 BlackV0747-75 UL listed -15 to 400 BlackV0848-75 PTFE Loaded -15 to 400 BlackV0884-75 General Purpose, UL listed -15 to 400 BrownV1163-75 “GFLT Type”, UL listed -35 to 400 Black

V1164-75 Low Compression Set -15 to 400 BlackV1226-75 Low Compression Set, AMS

7276, UL listed-15 to 400 Brown

V1260-75 Very Chemically Resistant, “Viton™ Extreme” Type

-15 to 400 Black

V1263-75 Low Swell, Flex Fuel Blends, UL listed -15 to 400 Black

V1289-75 AMS 7379, Low Temp. -55 to 400 BlackV1436-75 General Purpose, UL Listed -15 to 400 BlackV1475-75 General Purpose, X-rings -15 to 400 BlackV1476-75 General Purpose -15 to 400 BrownVA151-75 General Purpose, UL Listed -15 to 400 BlackVG292-75 Engine Coolant Biodiesel Resistant -15 to 400 BlackVM100-75 AMS 7276, Low Compression Set -15 to 400 BlackVM125-75 “GLT” Type, AMS-R-83485, AMS 7287 -40 to 400 BlackVW173-75 Automotive Applications -15 to 400 GreenVX065-75 Extreme Low Temperature FKM,

Fuel Resistant-65 to 400 Black

V1274-80 USP Class VI, ISO 10993, FDA, Low Swell -15 to 400 BlackVG286-80 ISO 23936 RGD & Extrusion Resistant,

Low Compression Set-50 to 400 Black

VP104-85 Base Resistant +10 to +400 BlackV0709-90 AMS 7259 -15 to 400 BlackV0894-90 General Purpose -15 to 400 BrownV1411-90 General Purpose -15 to 400 BlackV1412-90 General Purpose -15 to 400 BrownVA153-90 General Purpose -15 to 400 BlackVW155-90 General Purpose -15 to 400 GreenVG109-90 ISO 23936 RGD & Extrusion Resistant, Low

Compression Set-50 to 400 Black

VX165-90 Extreme Low Temperature FKM, Extrusion/RGD Resistant

-65 to 400 Black

V1238-95 Extrusion & RGD Resistant -15 to 400 BlackFluorocarbon (FKM, FPM)

19MATERIAL OFFERING

Tetrafluoroethylene - Propylene (AFLAS)This material is a copolymer of TFE and propylene. Its chemical resistance is excellent across a wide range of aggressive media. Polymer is sold under the tradename AFLAS®.COMPOUND NO. RECOMMENDED FOR TEMP. RANGE

(° F) COLOR

V1006-75 AMS 7255 25 to 450 Black

VP101-80 General Purpose 25 to 450 Black

V1041-85 RGD Resistant, General Purpose, NORSOK M710

15 to 450 Black

VP103-95 Extrusion Resistant 25 to 450 Black

High Performance Fluoroelastomer (HiFluor)Hifluor is Parker’s tradename for high performance fluoroelastomers – materials that “bridge the gap” between traditional fluorocarbon and perfluoroelastomer.COMPOUND NO. RECOMMENDED FOR TEMP. RANGE

(° F) COLOR

HF355-65 USP Class VI, Extreme Low Extractibles -15 to 400 Trans.

HF359-80 Resistant to Plasma Etch, Low Metal Ions -15 to 400 Tan


COLOR

FF354-65 Low Closure Force 5 to 608 White

FF156-75 Broad Chemical Resistance, FDA, General Purpose

5 to 525 Black

FF200-75 Low Comp Set, AMS7257, FDA 5 to 608 Black

FF302-75 Etch Resistant, Low Metal Ions 5 to 608 Brown

FF350-75 Plasma, High Purity, FDA, USP Class VI

5 to 608 White

FF352-75 General Purpose, Etch Resistant 5 to 608 White

FF370-75 Low Particle Generation, Low Metal Ions

5 to 608 Black

FF500-75 Broad Chemical Resistance, FDA

5 to 550 Black

FF580-75 Broad Chemical Resistance, Steam Resistant, Amine/Base Resistant, USP VI

5 to 525 Black

Perfluoroelastomer (ULTRA) (FFKM)Perfluoroelastomer is a rubber version of PTFE. Available from Parker under the tradenames Parofluor® and Parofluor® ULTRA™.




COLOR

FF504-80 Broad Chemical Resistance, Steam Resistant, Amine/Base Resistant, Lewis Acid Resistant

5 to 525 Green

FF400-80 Low Temp., RGD Resistant -40 to 525 Black

FF202-90 Low Compression Set, Extrusion Resistant, NORSOK M710

5 to 608 Black

FF582-90 Steam Resistant, Amine/Base Resistant, ISO 23936-2

5 to 525 Black

V8581-90 Plasma Etch Resistant, Low Stiction 5 to 550 White

Und

erw

riter

s La

bora

torie

s A

ppro

ved

Serv

ices

*

* Con

tact

Zat

koff

Seal

s & P

ackin

gs fo

r spe

cific r

atio

s of a

lcoho

l (m

ethy

l and

/or e

thyl)

and

gas

olin

e.

Note

: Mat

eria

l cer

tifica

tions

are

sub

ject

to c

hang

e. P

leas

e co

ntac

t Zat

koff

Seal

s &

Pack

ings

for m

ore

info

rmat

ion.

Perfluoroelastomer (ULTRA) (FFKM)

Suita

ble

for

use

in U

L 10

81

Suita

ble

for

use

in U

L 26

2 ap

plic

atio

ns

Suita

ble

for

UL

25 g

aske

t app

licat

ions

Dry

Che

mic

al, C

arbo

n D

ioxi

de, W

ater

Fire

Ext

ingu

ishi

ng A

gent

s

Gaso

line

Gaso

line/

Alco

hol B

lend

s*

Nap

tha

or K

eros

ene

MPS

Gas

MFG

or

Nat

ural

Gas

Die

sel F

uel,

Fuel

Oil,

Lub

ricat

ing

Oil

Hea

ted

Fuel

Oil

Anhy

drou

s Am

mon

ia

LP-G

as

Laun

dry

Det

erge

nts

Dis

hwas

hing

Det

erge

nts

SERVICE

Code A B C D E F G H I J L M

EA454-50 (3575)

EA140-70

EB152-70 (3407)

EJ151-80

L1120-70

LM100-70

N0299-50

N0497-70

N0674-70

N1499-70

N1500-75

V1262-65

V0747-75

V0884-75

V1163-75

V1226-75

V1263-75

V1436-75

VA151-75 (19357)

VM100-75

E85

21MATERIAL OFFERING

FDA, USDA, NSF 51, USP Approved CompoundsThe Food and Drug Adminis-tration (FDA) has established a list of rubber compounding ingredients which tests have indicated are neither toxic nor carcinogenic. Rubber com-pounds produced entirely from those ingredients and which also pass the FDA extraction tests are said to “meet the FDA requirements”. The FDA does not approve rubber compounds. It is the responsibility of the manufacturer to compound food grade materials from the FDA list of ingredients and establish whether they pass the necessary extraction requirements. Similar standards are established by the United States Department of Agriculture (USDA).Additional requirements have been imposed upon seal manufacturers regarding food and beverage service. Parker has developed several materials that are certified to NSF 51, Food and Beverage Standard. In critical medical applications, seals often must be made from an even “cleaner” list of ingredients. The U.S. Pharmacopoeia (USP) Class VI outlines requirements for system toxicity and intracutaneous toxicity for these “cleaner” compounds. The USP Class VI compounds must be made from ingredients with clear histories of biocompatibility that meet tighter requirements for leachates.Typical applications for our FDA, NSF 51, USDA materials are disposable medical devices, surgical instruments, and medical fluid dispensing components, as well as a wide variety of food and beverage handling equipment. The type of approval/certification required generally rests with the end customer’s regulatory expectations for the specific application.

NSF 61 Approved Compounds NSF 61 Drinking Water System Components—is the nationally recognized health effects standard for all devices, components, and materials which contact drinking water. The O-Ring and Engineered Seals Division has developed several materials that are certified to NSF 61. Many of these materials are approved for use in the United Kingdom (WRAS), and Germany (KTW) as well as North America.NSF International is an industry regulating agency that was established in 1944. Recognized by ANSI (American National Standards Institute), NSF maintains qualification standards and criteria for a wide range of products, including potable water components and delivery systems.

PARKER COMPOUND

POLYMER HARDNESS COLOR SERVICE

E1028-70 EPDM 70 Black FDA

E3609-70 EPDM 70 Black NSF 51, FDA, USP Class VI

FF200-75 FFKM 75 Black FDA

FF350-75 FFKM 75 White FDA, USP Class VI

FF500-75 FFKM 75 Black FDA

V8545-75 FFKM 75 Black FDA

V0680-70 FKM 70 Red NSF 51, FDA, USDA

N1219-60 NBR 60 Black NSF 51, FDA

N1220-70 NBR 70 Black NSF 51, FDA

S0802-40 VMQ 40 White FDA

S1538-55 VMQ 55 Translucent FDA, USP Class VI

S0317-60 VMQ 60 Rust FDA, USDA, USP Class VI

S1138-70 VMQ 70 Rust FDA

SM355-75 VMQ 75 Rust FDA, USDA

V1274-80 FKM 80 Black USP Class VI

PARKER COMPOUND

POLYMER HARDNESS WATER CONTACT TEMP.

SERVICE

E1244-70 EPDM 70 Commercial Hot** NSF 61, Internally Lubed

E3609-70 EPDM 70 Commercial Hot** NSF 61, WRAS, KTW, Excellent

Compression Set Resistance

EA140-70 EPDM 70 Commercial Hot** NSF 61

EJ274-70 EPDM 70 Commercial Hot** NSF 61, Internally Lubed, Chloramine

ResistantN0757-70 NBR 70 Cold Water*** NSF 61

N1510-70 (67997)

NBR 70 Commercial Hot** NSF 61

* NSF 61 listed materials given a commercial hot water rating are also certified for cold water** Commercial Hot = Tested at 82° C (180° F)*** Cold Water = Tested at 23° C (73.4° F)


MIL-L-2104 N0304-75 Oil, EngineMlL-S-3136 N0602-70 Standard Test Fluids, HydrocarbonMlL-L-3150 N0304-75 Oil, Preservative

MlL-G-3278 LM159-70 Aircraft Grease

MlL-O-3503 N0304-75 Oil, Preservative

MlL-G-3545 N0304-75 Hi-Temperature Grease

MIL-G-4339 N0304-75 Soluble Oil

MIL-G-4343 N0304-75 Pneumatic System Grease

MIL-J-5161 N0602-70 Jet Fuel, Referee

MIL-F-5566 E1267-80 Isopropyl Alcohol

MIL-G-5572 N0602-70 Fuel, Aircraft Reciprocating Engine, Grades 80/87 91/96, 100/130,115/145 Aviation Gas

MlL-H-5606 (1) Hydraulic Fluid, Petroleum Base, Aircraft and Ordnance

MlL-T-5624 N0602-70 Jet Fuel JP-4, JP-5

MlL-L-6081 N0304-75 Jet Engine Oil

MlL-L-6082 N0304-75 Lubricating Oil, Aircraft Reciprocating Piston Engine

MlL-H-6083 N0304-75 Hydraulic Fluid, Preservative

MlL-L-6085 V1164-75 Synthetic Di-ester Base Fluid

MlL-A-6091 E1267-80 Denatured Ethyl Alcohol

MlL-L-6387 V1164-74 Synthetic Di-ester Base Lubricating Oil

MlL-C-7024 N0602-70 Aircraft Calibrating Fluid

MlL-H-7083 E1267-70 Hydraulic Fluid, Hydrolube

MlL-G-7118 N0304-75 Actuator Grease

MlL-G-7187 N0304-75 Grease, Graphite

MLO-7277 V1164-75 Hydraulic Fluid, Petroleum Base, Hi-Temp.

MlL-G-7421 LM159-70 Grease, Extreme Low Temp.

MLO-7557 V1164-75 Hydraulic Fluid, Petroleum Base, Hi-Temp.

MlL-G-7711 N0304-75 Grease, General Purpose

MlL-L-7808 V1164-75 Lubricating Oil, Aircraft Turbine Engine, Synthetic Di-ester Base

MlL-L-7870 N0304-75 Lubricating Oil, Low Temperature, General Purpose

MlL-C-8188 V1164-75 Corrosion Preventive Oil, Syn. Base

MLO-8200 V1164-75 Hydraulic Fluid, Aircraft and Missile, Silicate-ester Base

MlL-H-8446 V1164-75 Hydraulic Fluid, Silicate-ester Base (MLO-8515)

MLO-8515 V1164-75 Hydraulic Fluid, Silicate-ester Base (MlL-H-8446)

MlL-L-9000 N0304-75 Lubricating Oil, Diesel

MlL-L-9236 V1164-75 Synthetic Lubricating Oil, Turbine

MlL-E-8500 E1267-80 Ethylene Glycol, Technical, Uninhibited

MIL-G-10924 N0304-75 Automotive Grease

MIL-H-13910 E1267-80 Hydraulic Fluid, Non-petroleum Automotive Brake

MIL-L-15017 N0304-75 Oil, Hydraulic

MIL-G-15793 N0304-75 Grease, Instrument

MIL-F-16884 N0304-75 Fuel Oil, Diesel, Marine

MlL-F-17111 N0304-75 Power Transmission Fluid

MlL-L-17331 V1164-75 Lubricating Oil, Non-corrosive, Steam Turbine

MlL-H-19457 E1267-80 Fire Resistant Hydraulic Fluid (phosphate-ester base)

MlL-L-21260 N0304-75 Lubricating Oil, Engine, Preservative

MlL-S-21568 E1267-80 Silicone Fluid, Dimethyl Polysiloxane

MlL-H-22251 E1267-80 Hydrazine Solution, 22%

MlL-L-23699 V1164-75 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base

MlL-G-23827 N0602-70 Grease, Aircraft and Instrument

MlL-G-25013 V1164-75 Bearing Grease, Extreme High Temperature

MlL-G-25537 N0304-75 Aircraft, Helicopter Oscillating Bearing Grease

MIL-F-25558 N0602-70 Fuel, Ram Jet (RJ1)

MlL-C-25576 N0602-70 Rocket and Ram Jet Fuel (RP1)

MlL-F-25656 N0602-70 Jet Fuel, Grade JP6

MlL-L-25681 V1164-75 Oil, Moly Disulphide, Silicone Base, High Temperature

MlL-G-25760 V1164-75 Bearing Grease, Wide Temp. Range

MlL-P-27402 Propellent, Aerozine-50

MlL-H-27601 V1164-75 Hydraulic Fluid, Petroleum Base, High Temperature, Flight Vehicle

MlL-L-46167 N0304-75 Lubricating Oil, Internal Combustion Engine, Arctic

MIl-H-46170 (2) Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic

MIL-F-81912 V1164-75 Fuel, Expendable, Turbine Engine

MlL-F-82522 N0602-75 Fuel, Ramjet Engine, T-H Dimer Grade RJ-4

MIL-T-83133 47-071 Turbine Fuel, Aviation, Kerosene Type, Grade JP-8

MIL-H-83282 (2) Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Aircraft

MIL-H-87257 (2) Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Aircraft, Low Temperature

Military Fluid Specification Description

FluidSpecification

ParkerO-Ring

Compound DescriptionFluidSpecification

ParkerO-Ring

Compound Description

Military Fluid Specification Description

Recommended compounds are military quality, meeting military material specifications. Appropriate industrial compounds may be selected from the Fluid Compatibility Table in Zatkoff Product catalog.

2. -26°C to +204°C (-15°F to +400°F), cpd. V1164-75 -29°C to +135°C (-20°F to +275°F), cpd. N0951-75 -54°C to +135°C (-65°F to +275°F), cpd. N0756-75

1. -48°C to +113°C (-55°F to +235°F), cpd. N0304-75-54°C to +135°C (-65°F to +275°F), cpd. N0756-75

ZZ-R-765E Rubber, Silicone 1a. 1b. 2a. 2b.1a. 1b. 2a. 2b.

1a. 1b.2a. 2b.2a. 2b.

2b.

405070807060

S1198-40S0899-50S0383-70S0614-80S1224-70S0613-60

- 103 to 437°F (-75 to 225°C)- 103 to 437°F (-75 to 225°C)- 103 to 437°F (-75 to 225°C)- 80 to 437°F (-62 to 225°C)- 80 to 437°F (-62 to 225°C)- 80 to 437°F (-62 to 225°C)

Low and High Temperature Resistant, Low Compression SetLow and High Temperature Resistant, Low Compression SetLow Temperature Resistant, Low Compression SetHigh Temperature Resistant, Low Compression SetHigh Temperature Resistant, Low Compression SetHigh Temperature Resistant, Low Compression Set

Note: A-A-59588 supercedes ZZR-R-765E

MIL-G-1149C- Gasket Materials, Synthetic Rubber, 50 and 65 Durometer HardnessType I

Class 1C0267-50 (-20 to 212°F) (-29 to 100°C)(2)

MIL-R-3533B - Rubber, Synthetic; Sheet, Strip and MoldedType I N0602-70 (-20 to 158°F) (-29 to 70°C)(2)

Grade B

MIL-P-5315B - Packing, O-ring, Hydrocarbon Fuel Resistant (Jet Fuels) N0602-70 ( -65 to 160°F) (-54 to 71°C) (Military O-ring series MS29512 and MS29513)

Note: AMS-P-5315 supercedes MIL-P-53158

MIL-P-5510C - Gasket, Straight Thread Tube Fitting Boss (MIL-H-5606 Petroleum Based Hydraulic Fluid,N0507-90 (-45 to 160°F) (-43 to 71°C)(2) (Military O-ring series MS28778)


MIL-DTL-7362D - Rubber, Sheet, Molded and Extruded Shapes, Synthetic Oil Resistant (AMS3021)

Types I, II 47-071 Synthetic, Di-Ester Base Lubricant (-65 to 275°F) (-54 to 135°C)(2)

(Military O-ring series MS29561 and WAS617)

Note: AMS-R-7362 supercedes MIL-R-7362D

MIL-G-21569B - Gaskets, Cylinder Liner Seal, SyntheticClass IClass II

N0674-70(1) S0604-70

(Room temperature to 194°F) (RT to 90°C)

MIL-DTL-25732C - Packing, Preformed, Petroleum Hydraulic Fluid Resistant (MIL-H-5606)

N0304-75 Petroleum Base Hydraulic Fluid (-65 to 275°F) (-54 to 135°C)(2) (Military O-ring series MS28775)

MIL-R-25988 - Rubber Fluorosilicone Elastomer, Oil and Fuel Resistant (MIL-H-5606 Petroleum Base)Type 1, Class 1, Type 1, Class 1, Type 1, Class 1, Type 1, Class 3,

Grade 60/3 Grade 70/1 Grade 80/4 Grade 75/2

LM158-60LM159-70LM160-80L1077-75(1)

Hydraulic Fluid, Fuel, Air (-90 to 350°F)(-68 to 176°C)(2)

Note: AMS-R-25988 supercedes MIL-R-35988

MIL-P-82744 - Packing, Preformed, Otto Fuel CompatibleE0515-80 (-65 to 250°F) (-54 to 121°C)

MIL-R-83248C, Type I - Rubber, Fluorocarbon Elastomer, High Temperature Fluid and CompressionClass I V0747-75, V1164-75,

V1226-75Set Resistant (-15 to 400°F) (-5 to 105°C)

Class 2 V0709-90

Note: AMS-R-83248 supercedes MIL-R-83248C

MIL-R-83485Grade 80 VM835-75 Rubber, fluorocarbon Elastomer, Improved performance @ low

Temp (-40 to 400°C)Note: AMS-R-83485 supercedes MIL-R-83485

MIL-P-83461B - Packings, Preformed, Petroleum Hydraulic Fluid Resistant, Improved PerformanceN0756-75 (-65 to 275°F) (-54 to 135°C)(2)


Notes: When ordering parts made with a military, AMS or NAS specification material, see the section on ordering. (1) Extra charges may apply for testing and documentation. (2) These temperatures are limits for particular tests required by the specifications, but they do not necessarily represent operating temperature limits. (3) Inactive for new design, refer to MIL-P-25732. See discussion on “Temperature” in the Basic O-Ring Elastomers Section (II).

Military Rubber SpecificationsNote: In keeping with the Federal Acquisition Streamlining Act (FASA), most of these specifications are in the process of being revised to AMS specifications. For the most current information, contact the O-Ring Division.

RubberSpecification Parker

Compound Temperature Range(2) DescriptionClass Grade

Military Rubber Specifications


23MATERIAL OFFERING

ZZ-R-765E Rubber, Silicone 1a. 1b. 2a. 2b.1a. 1b. 2a. 2b.

1a. 1b.2a. 2b.2a. 2b.

2b.

405070807060

S1198-40S0899-50S0383-70S0614-80S1224-70S0613-60

- 103 to 437°F (-75 to 225°C)- 103 to 437°F (-75 to 225°C)- 103 to 437°F (-75 to 225°C)- 80 to 437°F (-62 to 225°C)- 80 to 437°F (-62 to 225°C)- 80 to 437°F (-62 to 225°C)

Low and High Temperature Resistant, Low Compression SetLow and High Temperature Resistant, Low Compression SetLow Temperature Resistant, Low Compression SetHigh Temperature Resistant, Low Compression SetHigh Temperature Resistant, Low Compression SetHigh Temperature Resistant, Low Compression Set

Note: A-A-59588 supercedes ZZR-R-765E

MIL-G-1149C- Gasket Materials, Synthetic Rubber, 50 and 65 Durometer HardnessType I

Class 1C0267-50 (-20 to 212°F) (-29 to 100°C)(2)

MIL-R-3533B - Rubber, Synthetic; Sheet, Strip and MoldedType I N0602-70 (-20 to 158°F) (-29 to 70°C)(2)

Grade B

MIL-P-5315B - Packing, O-ring, Hydrocarbon Fuel Resistant (Jet Fuels) N0602-70 ( -65 to 160°F) (-54 to 71°C) (Military O-ring series MS29512 and MS29513)


MIL-P-5510C - Gasket, Straight Thread Tube Fitting Boss (MIL-H-5606 Petroleum Based Hydraulic Fluid,N0507-90 (-45 to 160°F) (-43 to 71°C)(2) (Military O-ring series MS28778)


MIL-DTL-7362D - Rubber, Sheet, Molded and Extruded Shapes, Synthetic Oil Resistant (AMS3021)

Types I, II 47-071 Synthetic, Di-Ester Base Lubricant (-65 to 275°F) (-54 to 135°C)(2)

(Military O-ring series MS29561 and WAS617)

Note: AMS-R-7362 supercedes MIL-R-7362D

MIL-G-21569B - Gaskets, Cylinder Liner Seal, SyntheticClass IClass II

N0674-70(1) S0604-70

(Room temperature to 194°F) (RT to 90°C)

MIL-DTL-25732C - Packing, Preformed, Petroleum Hydraulic Fluid Resistant (MIL-H-5606)

N0304-75 Petroleum Base Hydraulic Fluid (-65 to 275°F) (-54 to 135°C)(2) (Military O-ring series MS28775)

MIL-R-25988 - Rubber Fluorosilicone Elastomer, Oil and Fuel Resistant (MIL-H-5606 Petroleum Base)Type 1, Class 1, Type 1, Class 1, Type 1, Class 1, Type 1, Class 3,

Grade 60/3 Grade 70/1 Grade 80/4 Grade 75/2

LM158-60LM159-70LM160-80L1077-75(1)

Hydraulic Fluid, Fuel, Air (-90 to 350°F)(-68 to 176°C)(2)

Note: AMS-R-25988 supercedes MIL-R-35988

MIL-P-82744 - Packing, Preformed, Otto Fuel CompatibleE0515-80 (-65 to 250°F) (-54 to 121°C)

MIL-R-83248C, Type I - Rubber, Fluorocarbon Elastomer, High Temperature Fluid and CompressionClass I V0747-75, V1164-75,

V1226-75Set Resistant (-15 to 400°F) (-5 to 105°C)

Class 2 V0709-90

Note: AMS-R-83248 supercedes MIL-R-83248C

MIL-R-83485Grade 80 VM835-75 Rubber, fluorocarbon Elastomer, Improved performance @ low

Temp (-40 to 400°C)Note: AMS-R-83485 supercedes MIL-R-83485

MIL-P-83461B - Packings, Preformed, Petroleum Hydraulic Fluid Resistant, Improved PerformanceN0756-75 (-65 to 275°F) (-54 to 135°C)(2)


Notes: When ordering parts made with a military, AMS or NAS specification material, see the section on ordering. (1) Extra charges may apply for testing and documentation. (2) These temperatures are limits for particular tests required by the specifications, but they do not necessarily represent operating temperature limits. (3) Inactive for new design, refer to MIL-P-25732. See discussion on “Temperature” in the Basic O-Ring Elastomers Section (II).

Military Rubber SpecificationsNote: In keeping with the Federal Acquisition Streamlining Act (FASA), most of these specifications are in the process of being revised to AMS specifications. For the most current information, contact the O-Ring Division.

RubberSpecification Parker

Compound Temperature Range(2) DescriptionClass Grade

Military Rubber Specifications

1. Extra charges may apply for testing and documentation.2. These temperatures are limits for particular tests required by the specifications, but they do not necessarily represent operating

temperature limits.3. Inactive for new design, refer to MIL-P-25732. See discussion on “Temperature” in the Basic O-Ring Elastomers, Zatkoff Product catalog.

Notes: When ordering parts made with a military, AMS or NAS specification material, see Zatkoff Product catalog.

Note: In keeping with the Federal Acquisition Streamlining Act (FASA), most of these specifications are in the process of being revised to AMS specifications. For the most current information, contact Zatkoff Seals & Packings.

AMS(1) and NAS(2) Rubber Specification Descriptions

AMS3201 N0545-40 35-45 Dry Heat ResistanceAMS3205 N0299-50 45-55 Low Temperature ResistanceAMS3208 C0267-50 45-55 Weather Resistant, Chloroprene TypeAMS3209 C1124-70 65-75 Weather Resistant, Chloroprene TypeAMS3212 N0525-60 55-65 Aromatic Fuel ResistantAMS 3238 B0318-70 65-75 Phosphate-Ester Resistant, Butyl TypeAMS3301 S0469-40 35-45 Silicone, General PurposeAMS3302 S0595-50 45-55 Silicone, General PurposeAMS3303 S0613-60 55-65 Silicone, General PurposeAMS3304 S1224-70 65-75 Silicone, General PurposeAMS3305 S0614-80 75-85 Silicone, General PurposeAMS3325 LM158-60 55-65 Fluorosilicone Rubber, Fuel and Oil ResistantAMS3337 S0383-70 65-75 Silicone, Extreme Low Temperature ResistantAMS3345 S0899-50 45-55 Silicone RubberAMS3357 S1224-70 65-75 Silicone Rubber, Lubricating Oil, Compression Set ResistantAMS7257 FF200-75 70-80 Sealing Rings, Perfluorocarbon, High Temperature ResistantAMS7259 V0709-90 85-95 High Temp, Fluid Resistant, Very Low Compression Set FKMAMS7267 S0355-75 70-80 Silicone, Heat Resistant, Low Compression SetAMS7271 N0506-65 60-70 Fuel and Low Temperature ResistantAMS7272 N0287-70 65-75 Synthetic Lubricant ResistantAMS7276 V1164-75 70-80 High Temp. Fluid Resistant, Very Low Compression Set FKM

NAS1613 Rev 2 E0515 80-75 Packing, O-ring, Phosphate Ester ResistantNAS1613 Rev 5 E1267-80 75-85 Packing, O-ring, Phosphate Ester Resistant

AMS-P-5315 N0602-70 65-75 Packing O-ring, Hydrocarbon Fuel ResistantAMS-P-5510 N0507-90 85-95 Gasket, Straight Thread Tube Fitting BossAMS-R-7362 47-071 65-75 Rubber, Sheet, Molded and Extruded Shapes, Synthetic Oil ResistantAMS-P-25732 N0304-75 70-80 Packing, Preformed, Petroleum Hydraulic Fluid Resistant,

Limited Performance AMS-R-25988 LM158-60, LM159-70,

LM160-80, L1077-7555-85 Rubber, Fluorosilicone Elastomer, Oil and Fuel Resistant

AMS-R-83248 V1164-75, V1226-75, V0709-90

70-95 Rubber, Fluorocarbon Elastomer, High Temperature Fluid and Compression Set Resistant

AMS-P-83461 N0756-75 70-80 Packings, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance

AMS-R-83485 VM835-75 70-80 Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures

Note: When ordering parts made with military, AMS, or NAS specification material, see section on ordering. (1) Aerospace Material Specification issued by the Society of Automotive Engineers, Inc. (2) National Aerospace Standard issued by Aerospace Industries Association of America, Inc.


RubberSpecification

ParkerCompound

Description

Durometer Title








AMS-R-83248 V1164-75, V1226-75, V0709-90






RubberSpecification

ParkerCompound

Description

Durometer Title






AMS-R-83248 V1164-75, V1226-75, V0709-90






RubberSpecification

ParkerCompound

Description

Durometer Title

AMS(1) and NAS(2) Rubber Specification Descriptions Note: When ordering parts made with military, AMS, or NAS specification material, contact Zatkoff Seals & Packings.1. Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.2. National Aerospace Standard issued by Aerospace Industries Association of America, Inc.

Compound Selections for Commonly Used SAE and ASTM SpecificationsThis table is in accordance with the 1997 revision of ASTM D2000, which requires that minimum tensile strength indications shall be expressed in SI units (Megapascals). The “M” prefix in these callouts signifies this fact, and the requirement is shown in the 6th and 7th characters of each specification (excluding the “ASTM D2000”). For example, in the specification number M2BC614, the “14” indicates that the tensile strength of the material shall not fall below 14 MPa. To convert this value to psi (pounds per square inch), multiply by 145. In this example, the equivalent is 104.1 Bar (2030 psi).

Compound Selections For Commonly Used SAE and ASTM SpecificationsCompound Selections For Commonly Used SAE and ASTM Specifications

ASTM D200-97 Specification

MIL-R-3065 ASTM D735-58/

SAE J14 Specification

Parker Compound

NumberM2AA708 A13 EA14 F17 E0603-70M2AA810 A13 EA14 F17 Z1 (Purple) E0893-80M2AA810 A13 EA14 F17 R810BF2 E0515-80M2AA810 A13 EA14 F17 R810BF2 E0540-80M2AA907 A13 EA14 F17 E0652-90M3BA707 A14 B0612-70M2BC510 A14 B14 EO14 EO34 F17 SC515BE1E3F2 C0267-50M3BC614 A14 B14 EO14 EO34 F17 SC615BE1E3F1 C0518-60M3BC710 A14 B14 EO14 EO34 SC715BE3F1 C0873-70M3BC710 A14 B14 EO14 EO34 F17 SC715BE3F2 C1124-70M2BE510 A14 B14 EO14 EO34 F17 C0267-50M2BE614 A14 B14 EO14 EO34 F17 C0518-60M3BE710 A14 B14 EO14 EO34 C0873-70M2BE710 A14 B14 EO14 EO34 F17 C0147-70M2BF714 B34 EO14 EO34 N0674-70M2BG410 B34 EA14 EF11 EF21 EO14 EO34 SB415BE1E3F1 N0545-40M5BG410 A14 B34 EO14 EO34 N0545-40M2BG510 B14 EA14 EF11 EF21 EO14 EO34 F17 SB515A1BE1E3F2 N0299-50M2BG510 A14 B14 N0299-50M2BG608 B34 EA14 EO14 F17 Z1 (65 ± 5 Type A Durometer) SB712BE1F2 N0506-65M2BG614 B34 EA14 EF11 EF21 EO14 EO34 F17 SB620BE1F1 N0525-60M2BG708 EA14 EF11 EF21 EO14 EO34 F17 N0602-70M2BG708 EF11 EF21 EO34 F17 47-071M5BG710 A14 B14 N0497-70M2BG710 B14 B34 EA14 EF11 EF21 N0497-70M2BG714 B14 B34 EA14 EF11 EF21 EO14 EO34 SB715A1BE1E3 N0674-70M(5)BG714 A14 B14 B34 EO14 EO34 N0103-70M2BG714 B14 B34 EA14 EF11 EF21 EO14 E034 F17 SB715BE1E3F2 N0103-70M4BG721 B14 EO14 EO34 P0642-70M7BG810 EA14 EF11 EF21 EO14 EO34 Z1 (75 ± 5 Type A Durometer) Z2 (1) N0951-75M7BG810 EA14 EF11 EO14 EO34 F16 Z1 (75 ± 5 Type A Durometer) SB708E1E3F2 N0304-75M7BG910 B14 EA14 EF11 EF21 EO14 EO34 F16 SB915BE1E3 N0507-90M2BG910 B14 EA14 EF21 EO14 EO34 SB915BE1E3 N0552-90M(2)CA614 A25 B44 E0529-60M3CA710 A25 B44 EA14 E1244-70M4CA714 A25 B35 EA14 F17 G21 E0803-70M8CA814 A25 B35 EA14 F17 E0810-80

Prefix (grade) numbers and suffix letters in parenthesis are technically “not permitted”, but nevertheless, they describe a property of the material. Expla-nations in parenthesis apply to the Z suffix letters.(1) Compression Set = 20% max. after 70 hours at 125°C when tested on plied discs per ASTM D395.


25MATERIAL OFFERING

Compound Selections for Commonly Used SAE and ASTM Specifications Prefix (grade) numbers and suffix letters in parenthesis are technically “not permitted”, but nevertheless, they describe a property of the material. Explanations in parenthesis apply to the Z suffix letters.

1. Compression Set = 20% max. after 70 hours at 125°C when tested on plied discs per ASTM D395.

Compound Selections For Commonly Used SAE and ASTM Specifications


MIL-R-3065 ASTM D735-58/


Parker Compound



Compound Selections For Commonly Used SAE and ASTM Specifications


MIL-R-3065 ASTM D735-58/


Parker Compound



Compound Selections for Commonly Used SAE and ASTM Specifications (Continued)


MIL-R-3065 ASTM D735-58/


Parker Compound

NumberM2CH608 A25 B34 F17 Z1 (65 ± 5 Type A Durometer) N0506-65M3CH708 A25 B14 B34 EO16 EO36 EF31 N0497-70M2CH708 A25 EO35 F17 47-071M3CH714 A25 B14 EO16 E036 N0674-70M3CH714 A25 B34 EO16 EO36 N0674-70M3CH810 A25 EO16 Z1 (75 ± 5 Type A Durometer) Z2 (1) N0951-75M3CH810 A25 EO16 Z1 (75 ± 5 Type A Durometer) N0304-75M3CH910 B34 EO16 EO36 N0552-90M2CH910 EO15 EO35 Z1 (80% Min Elongation) N1210-90M3DA710 A26 B36 EA14 Z1 (75+/-5 type A Durometer) Z2 (130% Min Elongation) EO692-75M3DA810 A26 B36 EA14 E0540-80M2DH710 A26 B16 EO16 EO36Z1 (175% Min Elongation) N1173-70M2DH810 A26 B16 EO16 N1231-80M3DH710 A26 B16 EO16 EO36 F13 TB715E1E3 AA150-70M2DH910 A26 B36 EO16 EO36 KB163-90M2FK606 A19 EA36 LM158-60M2FK606 A19 EF31 Z1 (70+/-5 type A Durometer) LM159-70M2GE405 A19 B37 EA14 EO16 EO36 F19 G11 S0469-40M3GE503 A19 B37 EA14 EO16 EO36 F19 G11 TA507BE1E3F2 S0595-50M3GE603 A19 B37 EA14 EO16 EO36 F19 G11 TA605BE1E3F2 S0613-60M3GE603 A19 EO16 F19 S0317-60M7GE705 A19 B37 EA14 EO16 EO36 F19 G11 TA705BE1E3F2 S0455-70M7GE705 A19 B37 EA14 EO16 EO36 F19 G11 TA705BE1E3F2 S1224-70M7GE705 F19 S0383-70M6GE803 A19 B37 EA14 EO16 EO36 F19 G11 TA805BE1E3F2 S0614-80M2HK710 A1 - 10 B37 B38 EF31 EO78 Z1 (75 ± 5 Type A Durometer) V1164-75M2HK710 A1 - 10 B37 B38 EF31 EO78 Z1 (75 ± 5 Type A Durometer) Z2 (Brown) V1226-75M4HK710 A1 - 11 B38 EF31 EO78 Z1 (75 ± 5 Type A Durometer) V1164-75M4HK710 A1 - 11 B38 EF31 EO78 Z1 (75 ± 5 Type A Durometer) Z2 (Brown) Z3 (150% Min Elonga-tion)

V1226-75

M6HK810 A1-10 B38 EF31 EO78 EO88 Z1 (75 ± 5 Type A Durometer) V0747-75M7HK810 A1-11 B38 Z1 (75 ± 5 Type A Durometer) Z2 (130% Min Elongation) VM835-75M3HK910 A1 - 10 B37 EF31 EO78 V0709-90M3HK910 A1 - 10 B37 B38 EF31 EO78 Z1 (Brown) V0894-90M5HK910 A1 - 11 B38 EF31 EO78 V0709-90M5HK910 A1 - 11 B38 EF31 EO78 Z1 (Brown) V0894-90M2HK910 B37 C12 EF31 Z1 (95 ± 5 Type A Durometer) Z2 (80% Min Elongation) V1238-95SAE 120RI Class 1 NA151-70SAE 120R1 Class 2 N0497-70SAE J515 Type 1 N0552-90SAE J515 Type 2 E0652-90

Prefix (grade) numbers and suffix letters in parenthesis are technically “not permitted,” but nevertheless, they describe a property of the material. Explanations in parenthesis apply to the Z suffix letters.(1) Compression Set = 20% max. after 70 hours at 125°C when tested on plied discs per ASTM D395.

Revisions from Older Versions of ASTM

Old NewE14 = EO14

E34 = EO34

L14 = EA14

E51 = EF11

E61 = EF21

E71 = EF31

26

General Notes

27ENGINEERING TOOLS

Engineering Tools PressurePressure has a bearing on O-ring seal design as it can affect the choice of compound shore hardness. At very low pressures, proper sealing may be more easily obtained with lower durometer hardness (50-60 shore A). With higher pressures, the combination of pressure and material shore hardness determine the maximum clearance that may safely be tolerated (see Limits for Extrusion). Cyclic fluctuation of pressure can cause local extrusion of the O-ring resulting in “nibbling” (see Zatkoff Product catalog, Failure Modes), particularly if peak system pressures are high enough to cause expansion of the cylinder wall. One remedy may be to stiffen the cylinder to limit the expansion so that the bore to piston clearance does not exceed a safe value.

ExtrusionExtrusion of O-rings may also be prevented by the use of anti-extrusion (back-up) devices. These are thin rings of much harder material fitted into the gland between the seal and the clearance gaps, which essentially provide zero clearance. They are available in hard elastomer compounds, leather, PTFE, Nylon, and other similar materials. Parker Parbaks® are elastomer back-up rings and are generally recommended based on their proven functional superiority. The exact point at which it becomes necessary to use anti-extrusion devices will depend on the pressure, type of elastomer being used, its Shore hardness, the size of the clearance gap, and the degree of “breathing” of the metal parts which will be encountered. Limits for Extrusion may be used as a guide in determining whether or not anti-extrusion rings should be used. When using the data, include in the diametral clearance any “breathing,” or expansion of the cylinder bore that may be anticipated due to pressure. Although based on data obtained from O-rings, the ninety durometer curve can also be used as a guide to back-up ring performance. The Parbak Back-Up Rings in the Zatkoff Product catalog, describes in greater detail Parker Parbak back-up rings, and provides size and part number data. Also see “Patterns of O-Ring Failure” in Zatkoff Product catalog for more information on extrusion.

Total Diametral Clearance* (Radial Clearance if Concentricity Between Piston and Cylinder is Rigidly Maintained)*Reduce the clearance shown by 60% when

using silicone or fluorosilicone elastomers.

In.mm

iulFP

dr

russe(

eaB

)r FluidPressure

(psi)

690. 10 0,000552.0 8,000414.0 6,000

276.0 4,000207.0 3,000

138.0 2,000

69. 10 ,00055. 82 0041. 64 00

27. 46 00

20. 37 00

13. 28 00

6. 19 0000

.3.010

.5.020

.8.030

1.0.040

Extrusion

70 80 90HardnessShore A

Limits for Extrusion

No Extrusion

Basis for Curves1. 100,000 pressure cycles at the rate of 60 per minute from zero

to the indicated pressure.2. Maximum temperature (i.e. test temperature) 71°C (160°F).3. No back-up rings.4. Total diametral clearance must include cylinder expansion due

to pressure.5. Apply a reasonable safety factor in practical applications to allow

for excessively sharp edges and other imperfections and for higher temperatures.

The following charts are included to facilitate engineering analysis. Additional information is available in the Zatkoff Product catalog or online at www.zatkoff.com

28 ENGINEERING TOOLS

LubricationLubrication of O-ring seals is extremely important for installation and operation of dynamic seals as well as proper seating of static seals. The general rule for use of lubrication is: The greatest benefit in using a lubricant is obtained during the initial installation of the O-ring.Lubricants are commonly used on O-rings and other elasto-meric seals. Using a suitable grease or oil during assembly helps protect the O-ring from damage by abrasion, pinching, or cutting. It also helps to seat the O-ring properly, speeds up assembly operations, and makes automated assembly line procedures possible. An additional benefit is the protection that the lubricant provides as a surface film. Proper lubrication also helps protect some polymers from degradation by atmospheric elements such as ozone and its presence helps extend the service life of any O-ring. A lubricant is almost essential in pneumatic applications requiring dynamic service. In vacuum applications, appropriate lubricants help reduce the overall leak rate by filling the microfine inclusions of the gland’s metal surfaces and lowering permeation rates of the elastomer.Parker Seal offers two lubricants that will satisfy most service needs: Parker O-Lube and Parker Super-O-Lube. These two lubricants are described in the following paragraphs. The Lubricants lists their key properties along with others used in specific types of services. The chart below provides part number information for O-Lube and Super O-Lube.

Parker O-Lube Parker O-Lube is an outstanding general-purpose grease intended for use with O-ring and other seals in hydrocarbon service. It can also be used in pneumatic service. The useful temperature is from -29°C to 82°C (-20°F to 180°F).

Parker Super-O-Lube Parker Super-O-Lube is an all-purpose O-ring lubricant. It is not a grease, but rather a high-viscosity silicone oil. It is especially useful as a seal lubricant. The temperature range is -54°C to 204°C (-65°F to 400°F).Parker Super O-Lube can be used as an assembly lubricant on all rubber polymers, including silicones. (Note: Silicones require special consideration.) In addition, Parker Super-O-Lube has some unique advantages. It clings tenaciously to rubber or metal surface helping to prevent it from being flushed away by action of the system fluid. It has one of the widest temperature ranges of any seal lubricant available. It can be used for high pressure systems or in hard vacuum environments. Super-O-Lube’s inert nature lends itself to a wide variety of fluid systems. Since there are no organic fillers, there can be no clogging of microfilters.

Parker O-Ring LubricantsO-Lube Super-O-Lube

Part Number Description Part Number Description

LUB-O-LUBE 2 GRAM 2 gr. tube LUB-SUPEROLUBE 2 GRAM 2 gr. tubeLUB-O-LUBE .25 OZ 1/4 oz. tube LUB-SUPEROLUBE .25 OZ 1/4 oz. tubeLUB-O-LUBE .5 OZ 1/2 oz. tube LUB-SUPEROLUBE .5 OZ 1/2 oz. tube

LUB-O-LUBE 004 OZ 4 oz. tube LUB-SUPEROLUBE 002 OZ 2 oz. tubeLUB-O-LUBE 35LB 35 lb. pail LUB-SUPEROLUBE 8LB 8 lb. can

LUB-O-LUBE 400LB 400 lb. drum LUB-SUPEROLUBE 40LB 40 lb. pail

29ENGINEERING TOOLS

Notes: Assembly lubricants should always be used sparingly during application. A light film is all that is required. This is doubly important in cases 1 and 2 below.1. When only a thin film of O-Lube is used for assembly purposes, the assembly may be subject to higher temperatures, with limits

determined by the fluid and elastomer being used.2. Use only a thin film of Super-O-Lube on silicone rubber if the temperature will exceed 149°C (300°F).

Freon® is a registered trademark of E.I. du Pont de Nemours & Co. Skydrol® is a registered trademark of Solutia Inc.

MSDS are available at www.parkerorings.com or contact a Zatkoff Seals & Packings Representative

Lubricants

Type of Elastomer Type of Service Best Manufacturer Temp Range °F

NBR, Nitrile

Hydraulic Oils & Fuels Extreme Service Pneumatic Vacuum

O-Lube Parker -20 to 180Petrolatum Many -20 to 180Barium Grease Many -20 to 300Super O-Lube Parker -65 to 400DC-55 Dow Corning Co. -65 to 275

Celvacene Consolidated Vacuum Corp. -40 to 200

CR, Neoprene Hydraulic Oils & Freon® Vacuum

O-Lube Parker -20 to 180Petrolatum Many -20 to 180

Celvacene Consolidated Vacuum Corp, -40 to 200

EPDM Skydrol®Steam & Hot Water

MCS-352 Aviation Fluid Service Co. -65 to 300Super O-Lube Parker -65 to 400DC4, DC-7, DC55 Dow Corning Co. +32 to 350

Silicone GeneralHigh Temperature

Petrolatum Many -20 to 300FS1292 Dow Corning Co. -20 to 400

Fluorosilicone Oil or FuelHigh Temperature

Mil P 37649 Many -20 to 180Petrolatum Many -65 to 350Super O-Lube Parker -65 to 400DC 4 or DC-7 Dow Corning Co. +32 to 350

Fluorocarbon HydraulicVacuum & High Temperature

Petrolatum Many -20 to 180Super O-Lube Parker -65 to 400DC-55 Dow Corning -65 to 400

Notes: Assembly lubricants should always be used sparingly during application. A light film is all that is required. This is doubly important in cases 1 and 2 below.1. When only a thin film of O-Lube is used for assembly purposes, the assembly may be subject to higher temperatures, with limits determined by the

fluid and elastomer being used.2. Use only a thin film of Super-O-Lube on silicone rubber if the temperature will exceed 149°C (300°F).

Table 3-1: Parker O-Ring LubricantsFreon® is a registered trademark of E.I. du Pont de Nemours & Co. Skydrol® is a registered trademark of Solutia Inc.

Lubricants

O-Ring Compression ForceO-ring compression force is the force required to compress an O-ring the amount necessary to maintain an adequate sealing line of contact. See pages 30-34. It is very important in some applications, particularly in face-type seals where the available compression load is limited. The factors that influence compression force for a given application, and a method of finding its approximate magnitude are explained in Zatkoff Product catalog, O-ring Applications.

O-Ring Compression Force

DurometerRange Diameter Compression

Load

Less than normal

Less than normal

Less than 25.4 mm (1") Middle third of range

Over 25.4 mm (1") Lower half of range

Over normal Less than 25.4 mm (1") Upper third of range

Over normal Over 25.4 mm (1") Upper half of range

O-Ring Compression Force


.070

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.1

40%

9080

80

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91

eProC t necr p mnoi sse

70

70

70

70

60

60

60

50

50

50

80

9080

90

6050

9080

7060

50

Shore

A Hardne

ss

90

.103

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91


70

70

70

60

60

60

50

50

50

80

9080

90

50

9080

7060

50

Shore

A Hardne

ss

9080 90

8070

60

31ENGINEERING TOOLS

.070

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.1

40%

9080

80

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91


70

70

70

70

60

60

60

50

50

50

80

9080

90

6050

9080

7060

50

Shore

A Hardne

ss

90

.103

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91


70

70

70

60

60

60

50

50

50

80

9080

90

50

9080

7060

50

Shore

A Hardne

ss

9080 90

8070

60


.139

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91

ePoC t necrr p mnoi sse

70

70

70

60

60

50

50

80

9080

90

6050

90

7060

50

Shore

A Hardne

ss

9080

90

70

60

50 80

80

.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6


Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91

90

7060

50

80.210

Cro

ss S

ectio

n

70

70

7060

50

50

9080

90

60

Shore

AHardne

ss

9080 90

70

60

50

80

60 80

50

33ENGINEERING TOOLS

.139

Cro

ss S

ectio

n

Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91

ePoC t necrr p mnoi sse

70

70

70

60

60

50

50

80

9080

90

6050

90

7060

50

Shore

A Hardne

ss

9080

90

70

60

50 80

80

.1

40%

30%

20%

10% 5%

.2.3

.4.5

.6


Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91

90

7060

50

80.210

Cro

ss S

ectio

n

70

70

7060

50

50

9080

90

60

Shore

AHardne

ss

9080 90

70

60

50

80

60 80

50


2-13

Par

ker

Han

nifi

n C

orp

ora

tio

n •

O-R

ing

Div

isio

n23

60 P

alum

bo

Dri

ve, L

exin

gto

n, K

Y 4

0509

Pho

ne: (

859)

269

-235

1 •

Fax

: (85

9) 3

35-5

128

ww

w.p

arke

rori

ngs.

com

Thes

e p

rod

ucts

ca

n ex

pos

e yo

u to

ch

emic

als

incl

udin

g ca

rbon

b

lack

(a

irbor

ne

and

ex

trac

ts),

antim

ony

trio

xid

e,

titan

ium

d

ioxi

de,

si

lica

(cry

stal

line)

,

canc

er;

and

1,3

-but

adie

ne,

epic

hlor

ohyd

rin,

di(2

-eth

ylhe

xyl)p

htha

late

, d

i-is

odec

yl p

htha

late

, et

hyle

ne t

hiou

rea,

met

hyl i

sob

utyl

ket

one,

met

hano

l, to

luen

e, le

ad a

nd

lead

co

mp

ound

s w

hich

ar

e kn

own

to

the

Sta

te

of

Cal

iform

ia

to

caus

e b

irth

def

ects

an

d

othe

r re

pro

duc

tive

harm

. Fo

r m

ore

info

rmat

ion

go

to

ww

w.P

65W

arni

ngs.

ca.g

ov.

WA

RN

ING

:

Com

pres

sion

Loa

d pe

r Lin

ear I

nch

of S

eal

— P

ound

s.1

.2.3

.4.5

.6.7

.82

22

33

34

44

55

56

66

77

78

88

99

910

100

1000

.91

40%

30%

20%

10% 5%

eProC t necr p moi ssen

.275

Cro

ss S

ectio

n

70

70

7060

50

50 9080

90

90

7060

50Sho

re A Hard

ness

9080

90

70

60

50

80

80

60

80

5060

PH_5

700_

Sec2

with

pro

p 65

.indd

13

11/1

3/20

18

4:04

:02

PM

35

General Notes

36 GLAND DESIGNS

The following charts are included to facilitate engineering analysis. Additional information is available in the Zatkoff Product catalog or online at www.zatkoff.com

Gland DesignsParker offers O-rings for use in static as well as dynamic sealing applications. Static seals are those where the mating parts of the gland do not have movement relative to each other. These seals include face, radial, and dovetail. Examples of these seals and the corresponding design charts are found on pages 36-39 and 42-44. Dynamic seals include reciprocating, floating pneumatic, oscillating, and rotary applications. Dynamic seals are defined by one of the gland parts having movement relative to the other part. Gland design recommendations for a reciprocating seal are provided on pages 40 and 41.

* Mean OD = ID + (2X Cross Section)

ID

L

For Internal Pressure (outward pressure direction) dimension the groove by its outside diameter (HO) and width:

(HO) = Mean O.D. of O-ring tolerance = Minus 1% of mean O.D., but not more than -.060

For External Pressure(inward pressure direction) dimension the groove by its inside diameter (HI) and widthy:

(HI) = Mean I.D. of O-ring tolerance = Plus 1% of mean I.D., but not more than +.060

W

WW

.005 Max.

.003 Max.

Break CornersApprox. .005 RAD.

Groove Depth(=Gland Depth)L

G

R

Gland DetailFinishes are RMS values

Surface finish X:32 for liquids16 for vacuumand gases

0° to 5°*(Typ.)

X

X

63

63

ID

* Mean OD = ID + (2X Cross Section)

ID

L

For Internal Pressure (outward pressure direction) dimension the groove by its outside diameter (HO) and width:

(HO) = Mean O.D. of O-ring tolerance = Minus 1% of mean O.D., but not more than -.060

For External Pressure(inward pressure direction) dimension the groove by its inside diameter (HI) and widthy:

(HI) = Mean I.D. of O-ring tolerance = Plus 1% of mean I.D., but not more than +.060

W

WW

.005 Max.

.003 Max.

Break CornersApprox. .005 RAD.

Groove Depth(=Gland Depth)L

G

R

Gland DetailFinishes are RMS values

Surface finish X:32 for liquids16 for vacuumand gases

0° to 5°*(Typ.)

X

X

63

63

ID

37GLAND DESIGNS

O-R

ing

Face

Sea

l Gla

nds

Thes

e di

men

sions

are

inte

nded

prim

arily

for f

ace

type

O-ri

ng s

eals

and

low te

mpe

ratu

re a

pplic

atio

ns.

O-R

ing

Size

Par

ker N

o.

2-si

ze A

S568

W C

ross

Sec

tion

LSq

ueez

eG

Gro

ove

Wid

thR

Nom

inal

Actu

alG

land

Dep

thAc

tual

%Li

quid

sVa

cuum

and

Gas

esG

roov

e R

adiu

s

004

to 050

1/16

.070

± .

003

.050

to .0

54.0

13 to

.023

19 to

32

.101

to .1

07.0

84 to

.089

.005

to .0

15

102

to

178

3/32

.103

± .

003

.074

to .0

80.0

20 to

.032

20 to

30

.136

to .1

42.1

20 to

.125

.005

to .0

15

201

to

284

1/8

.139

± .

004

.101

to .

107

.028

to .0

4220

to 3

0.1

77 to

.187

.158

to .1

64.0

10 to

.025

309

to

395

3/16

.210

± .

005

.152

to .1

62.0

43 to

.063

21 to

30

.270

to .2

90.2

39 to

.244

.020

to .0

35

425

to 475

1/4

.275

± .

006

.201

to .2

11.0

58 to

.080

21 to

29

.342

to .3

62.3

09 to

.314

.020

to .0

35

Spec

ial

3/8

.375

± .

007

.276

to .2

86.0

82 to

.108

22 to

28

.475

to .4

85.4

19 to

.424

.030

to .0

35

Spec

ial

1/2

.500

± .

008

.370

to .3

80.1

12 to

138

22 to

27

.638

to .6

45.5

60 to

.565

.030

to .0

45

Not

e: T

hese

des

ign

reco

mm

enda

tions

ass

ume

met

al-to

-met

al c

onta

ct. I

n so

me

hard

vac

uum

app

licat

ions

, it m

ay b

e ne

cess

ary

to in

crea

se c

ompr

essi

on o

n th

e se

al to

ach

ieve

pro

per s

ealin

g.

Con

tact

Zat

koff

Seal

s &

Pack

ings

for m

ore

info

rmat

ion.

38 GLAND DESIGNS

Indu

stria

l O-R

ing

Stat

ic S

eal G

land

s

W W

I.D.

W

W

.005

Typ

.

.003

Ty

p.G

Pres

sure

Pres

sure

Pres

sure

G1

G2

Mal

e G

land

Fem

ale

Gla

nd

1/2

E

1/2

E

1/2

E

FL

Gla

nd

Dep

th

F G

roov

e D

epth

(Ref

.)

G

(e)

0° to

5°

(Typ

.)

32 32

63

63

R

Gla

nd D

etai

l

Fini

shes

are

RM

S va

lues

.

Brea

k C

orne

rsAp

prox

imat

ely

.005

RAD

.

No

Parb

ak

Rin

gO

ne P

arba

k R

ing

Two

Parb

ak

Rin

g

Sect

ion

W-W

O-R

ing

2-Si

ze

AS56

8B

WC

ross

Sec

tion

L G

land

Sque

eze

E (a

) D

iam

etra

l Cle

ar-an

ce

G G

roov

e W

idth

R

Gro

ove

Max

. Ec

cent

ricity

(b)

Nom

inal

Actu

alD

epth

Actu

al%

No P

ar-ba

k ri

ngs

(G)

1 Pa

rbak

rin

gs

(G1)

2 Pa

rbak

rin

gs

(G2)

Rad

ius

004

- 050

1/16

.070

± .

003

.050

to

.0

52

.015

to

.0

23

22

to

32.0

02 to

.005

.093

to

.0

98

.138

to

.1

43

.205

to

.2

10

.005

to

.0

15.0

02

105

-178

3/32

.103

± .

003

.081

to

.0

83

.017

to

.0

25

17

to

24.0

02 to

.005

.140

to

.1

45

.171

to

.1

76

.238

to

.2

43

.005

to

.0

15.0

02

201

- 284

1/8

.139

± .

004

.111

to

.1

13

.022

to

.0

32

16

to

23.0

03 to

.006

.187

to

.1

92

.208

to

.2

13

.275

to

.2

80

.010

to

.0

25.0

03

309

- 395

3/16

.210

± .

005

.170

to

.1

73

.032

to

.0

45

15

to

21.0

03 to

.00

6.2

81

to

.286

.311

to

.3

16

.410

to

.4

15

.020

to

.0

35.0

04

425

- 475

1/4

.275

± .

006

.226

to

.2

29

.040

to

.0

55

15

to

20.0

04 to

.007

.375

to

.3

80

.408

to

.4

13

.538

to

.5

43

.020

to

.0

35.0

05

(a) C

lear

ance

(ext

rusi

on g

ap) m

ust b

e he

ld to

a m

inim

um c

onsi

sten

t with

des

ign

requ

irem

ents

for t

empe

ratu

re ra

nge

varia

tion.

(b) T

otal

indi

cato

r rea

ding

bet

wee

n gr

oove

and

adj

acen

t bea

ring

surfa

ce.

(c) R

educ

e m

axim

um d

iam

etra

l cle

aran

ce 5

0% w

hen

usin

g si

licon

e or

fluo

rosi

licon

e O

-ring

s.(d

) For

eas

e of

ass

embl

y, w

hen

Parb

aks

are

used

, gla

nd d

epth

may

be

incr

ease

d up

to 5

%.

Indu

stria

l O-R

ing

Stat

ic S

eal G

land

s

39GLAND DESIGNS

O-R

ing

2-Si

ze

AS56

8B

WC

ross

Sec

tion

L G

land

Sque

eze

E (a

) D

iam

etra

l Cle

ar-an

ce

G G

roov

e W

idth

R

Gro

ove

Max

. Ec

cent

ricity

(b)

Nom

inal

Actu

alD

epth

Actu

al%

No P

ar-ba

k ri

ngs

(G)

1 Pa

rbak

rin

gs

(G1)

2 Pa

rbak

rin

gs

(G2)

Rad

ius

004

- 050

1/16

.070

± .

003

.050

to

.0

52

.015

to

.0

23

22

to

32.0

02 to

.005

.093

to

.0

98

.138

to

.1

43

.205

to

.2

10

.005

to

.0

15.0

02

105

-178

3/32

.103

± .

003

.081

to

.0

83

.017

to

.0

25

17

to

24.0

02 to

.005

.140

to

.1

45

.171

to

.1

76

.238

to

.2

43

.005

to

.0

15.0

02

201

- 284

1/8

.139

± .

004

.111

to

.1

13

.022

to

.0

32

16

to

23.0

03 to

.006

.187

to

.1

92

.208

to

.2

13

.275

to

.2

80

.010

to

.0

25.0

03

309

- 395

3/16

.210

± .

005

.170

to

.1

73

.032

to

.0

45

15

to

21.0

03 to

.00

6.2

81

to

.286

.311

to

.3

16

.410

to

.4

15

.020

to

.0

35.0

04

425

- 475

1/4

.275

± .

006

.226

to

.2

29

.040

to

.0

55

15

to

20.0

04 to

.007

.375

to

.3

80

.408

to

.4

13

.538

to

.5

43

.020

to

.0

35.0

05

(a) C

lear

ance

(ext

rusi

on g

ap) m

ust b

e he

ld to

a m

inim

um c

onsi

sten

t with

des

ign

requ

irem

ents

for t

empe

ratu

re ra

nge

varia

tion.

(b) T

otal

indi

cato

r rea

ding

bet

wee

n gr

oove

and

adj

acen

t bea

ring

surfa

ce.

(c) R

educ

e m

axim

um d

iam

etra

l cle

aran

ce 5

0% w

hen

usin

g si

licon

e or

fluo

rosi

licon

e O

-ring

s.(d

) For

eas

e of

ass

embl

y, w

hen

Parb

aks

are

used

, gla

nd d

epth

may

be

incr

ease

d up

to 5

%.

Indu

stria

l O-R

ing

Stat

ic S

eal G

land

s

40 GLAND DESIGNS

Indu

stria

l Rec

ipro

catin

g O

-Rin

g Pa

ckin

g G

land

s

Pist

on G

land

Rod

Gla

nd

Pres

sure

Pres

sure

Pres

sure

GG

GN

o Pa

rbak

R

ing

One

Par

bak

Rin

gTw

o Pa

rbak

R

ings

WW W

IDW

.005

Ty

p.

.003

Ty

p.

G

FL

F G

roov

eD

epth

(Ref

.)

R

Gla

nd D

etai

l

0° to

5°

(Typ

.)1/

2 E

3216

X

X

Surf

ace

Fini

sh X

:32

With

out P

arba

k R

ing

63 W

ith P

arba

k R

ing

Fini

shes

are

RM

S va

lues

Brea

k C

orne

rs

Appr

ox. .

005

Typ.

RAD

. Gla

nd

Dep

th

41GLAND DESIGNS

Indu

stria

l Rec

ipro

catin

g O

-Rin

g Pa

ckin

g G

land

s

Pist

on G

land

Rod

Gla

nd

Pres

sure

Pres

sure

Pres

sure

GG

GN

o Pa

rbak

R

ing

One

Par

bak

Rin

gTw

o Pa

rbak

R

ings

WW W

IDW

.005

Ty

p.

.003

Ty

p.

G

FL

F G

roov

eD

epth

(Ref

.)

R

Gla

nd D

etai

l

0° to

5°

(Typ

.)1/

2 E

3216

X

X

Surf

ace

Fini

sh X

:32

With

out P

arba

k R

ing

63 W

ith P

arba

k R

ing

Fini

shes

are

RM

S va

lues

Brea

k C

orne

rs

Appr

ox. .

005

Typ.

RAD

. Gla

nd

Dep

th

Indu

stria

l Rec

ipro

catin

g O

-Rin

g Pa

ckin

g G

land

s

O-R

ing

2-Si

zeAS

568B

W C

ross

-Sec

tion

L G

land

Sque

eze

E (a

) D

iam

etra

l C

lear

ance

G -

Gro

ove

Wid

th

R G

roov

eM

ax.

Ecce

ntric

ity

(b)

No P

arba

k1

Parb

ak2

Parb

ak

Nom

inal

Actu

alD

epth

Actu

al%

Rin

g (G

)R

ing

(G1)

Rin

gs (G

2)R

adiu

s

006

to 012

1/16

.070 ± .00

3.0

55 to

.057

.010

to .0

1815

- 25

.002

to .0

05.0

93 to

.098

.138

to .1

43.2

05 to

.21

0.0

05 t

o .0

15.0

02

104

to 116

3/32

.103

± .003

.088

to .0

90.0

10 to

.018

10 -

17.0

02 to

.005

.140

to .1

45.1

71 to

.176

.238

to

.243

.005

to

.015

.002

201

to

222

1/8

.139 ± .004

.121

to .1

23.0

12 to

.022

9 - 1

6.0

03 to

.006

.187

to

.192

.208

to .2

13.2

75 t

o .2

80.0

10 t

o .0

25.0

03

309

to 349

3/16

.210 ±

.005

.185

to .1

88.0

17 to

.030

8 - 1

4.0

03 to

.006

.281

to .2

86.3

11 to

.316

.410

to .4

15.0

20 to

.035

.004

425

to

460

1/4

.275 ±

.006

.237

to .2

40.0

29 to

.044

11 -

16.0

04 to

.007

.375

to .3

80.4

08 to

.413

.538

to

.543

.020

to .0

35.0

05

(a) C

lear

ance

(ext

rusi

on g

ap) m

ust b

e he

ld to

a m

inim

um c

onsi

sten

t with

des

ign

requ

irem

ents

for t

empe

ratu

re ra

nge

varia

tion.

(b) T

otal

indi

cato

r rea

ding

bet

wee

n gr

oove

and

adj

acen

t bea

ring

surfa

ce.

(c) O

-ring

s no

t list

ed a

re n

ot re

com

men

ded

for r

ecip

roca

ting

appl

icatio

ns.

42 GLAND DESIGNS

4-19Parker Hannifin Corporation • O-Ring Division2360 Palumbo Drive, Lexington, KY 40509

Phone: (859) 269-2351 • Fax: (859) 335-5128www.parkerorings.com

These products can expose you to chemicals including carbon black (airborne and extracts), antimony trioxide, titanium dioxide, silica (crystalline),

cancer; and 1,3-butadiene, epichlorohydrin, di(2-ethylhexyl)phthalate, di-isodecyl phthalate, ethylene thiourea, methyl isobutyl ketone, methanol, toluene, lead and lead compounds which are known to the State of Califormia to cause birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING:

66°

Mean GrooveDiameter CoincidesWith MeanO-ring Diameter. Finishes are RMS values

L

G

R

R1

O-Ring Dovetail Grooves Radius “R” is CRITICAL. Insufficient radius will potentially cause damage to the O-ring during installation, while excessive radius may contribute to extrusion.

O-Ring Size

AS568A-

W Cross Section

Nominal Actual

L Gland Depth Squeeze %

G Groove Width

(To sharp corner) R R1

004 through

0501/16 .070

±.003

.053 to

.05523

.057 to

.061.005 1/64

102 through

1783/32 .103

±.003

.081 to

.08321

.083 to

.087.010 1/64

201 through

2841/8 .139

±.004

.111 to

.11320

.113 to

.117.010 1/32

309 through

3953/16 .210

±.005

.171 to

.17318

.171 to

.175.015 1/32

425 through

4751/4 .275

±.006

.231 to

.23416

.231 to

.235.015 1/16

Special 3/8 .375 ±.007

.315 to

.31916

.315 to

.319.020 3/32

NOTE: These design recommendations assume metal-to-metal contact. In special applications, for example in the semiconductor industry, deviation from

shown above are necessary.

PH_5700_Sec4 with prop 65.indd 19 11/19/2018 3:21:18 PM

O-Ring Dovetail GroovesRadius “R” is CRITICAL. Insufficient radius will potentially cause damage to the O-ring during installation, while excessive radius may contribute to extrusion.

Dovetail GroovesIt is often necessary to provide some mechanical means for holding an O-ring in a face seal groove during assembly and maintenance of equipment. An undercut or dovetail groove has proven beneficial in many applications to keep the O-ring in place. This is an expensive groove to machine, however, and thus should be used only when absolutely necessary.

It should be noted that although this method has been used successfully, it is not generally recommended. The inherent characteristics of the groove design limit the amount of void area. Normally acceptable tolerance extremes, wide service temperature ranges, and fluid media that cause high swell of the elastomer are conditions that cannot be tolerated in this type of groove design.

4-19Parker Hannifin Corporation • O-Ring Division2360 Palumbo Drive, Lexington, KY 40509

Phone: (859) 269-2351 • Fax: (859) 335-5128www.parkerorings.com

These products can expose you to chemicals including carbon black (airborne and extracts), antimony trioxide, titanium dioxide, silica (crystalline),

cancer; and 1,3-butadiene, epichlorohydrin, di(2-ethylhexyl)phthalate, di-isodecyl phthalate, ethylene thiourea, methyl isobutyl ketone, methanol, toluene, lead and lead compounds which are known to the State of Califormia to cause birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING:

66°

Mean GrooveDiameter CoincidesWith MeanO-ring Diameter. Finishes are RMS values

L

G

R

R1

O-Ring Dovetail Grooves Radius “R” is CRITICAL. Insufficient radius will potentially cause damage to the O-ring during installation, while excessive radius may contribute to extrusion.

O-Ring Size

AS568A-

W Cross Section

Nominal Actual


G Groove Width


004 through

0501/16 .070

±.003

.053 to

.05523

.057 to

.061.005 1/64

102 through

1783/32 .103

±.003

.081 to

.08321

.083 to

.087.010 1/64

201 through

2841/8 .139

±.004

.111 to

.11320

.113 to

.117.010 1/32

309 through

3953/16 .210

±.005

.171 to

.17318

.171 to

.175.015 1/32

425 through

4751/4 .275

±.006

.231 to

.23416

.231 to

.235.015 1/16

Special 3/8 .375 ±.007

.315 to

.31916

.315 to

.319.020 3/32



PH_5700_Sec4 with prop 65.indd 19 11/19/2018 3:21:18 PM

NOTE: These design recommendations assume metal-to-metal contact. In special applications, for example in the semiconductor industry, deviation from these recommendations may be necessary. When designing with Parofluor® elastomers, one should take into consideration that perfluorinated elastomers may require more squeeze than an FKM material to obtain optimum sealing performance. To increase squeeze, modifications of the design recommendations shown above are necessary.

43GLAND DESIGNS

NOTE: These design recommendations assume metal-to-metal contact. In special applications, for example in the semiconductor industry, deviation from these recommendations may be necessary. When designing with Parofluor® elastomers, one should take into consideration that perfluorinated elastomers may require more squeeze than an FKM material to obtain optimum sealing performance. To increase squeeze, modifications of the design recommendations shown above are necessary.

O-Ring Half Dovetail Grooves Radius “R” is CRITICAL. Insufficient radius will potentially cause damage to the O-ring during installation, while excessive radius may contribute to extrusion.

O-Ring Size

AS568A-

W Cross Section

Nominal Actual


G Groove Width


004 through

0501/16 .070

±.003

.053 to

.05523

.064 to

.066.005 1/64

102 through

1783/32 .103

±.003

.083 to

.08519

.095 to

.097.010 1/64

201 through

2841/8 .139

±.004

.113 to

.11518

.124 to

.128.010 1/32

309 through

3953/16 .210

±.005

.173 to

.17617

.190 to

.193.015 1/32

425 through

4751/4 .275

±.006

.234 to

.23815

.255 to

.257.015 1/16

Special 3/8 .375 ±.007

.319 to

.32314

.350 to

.358.020 3/32



66°

Mean GrooveDiameter CoincidesWith MeanO-ring Diameter.

L

G

R

R1

Finishes are RMS values

Half Dovetail Grooves

O-Ring Half Dovetail Grooves Radius “R” is CRITICAL. Insufficient radius will potentially cause damage to the O-ring during installation, while excessive radius may contribute to extrusion.

O-Ring Size

AS568A-

W Cross Section

Nominal Actual


G Groove Width


004 through

0501/16 .070

±.003

.053 to

.05523

.064 to

.066.005 1/64

102 through

1783/32 .103

±.003

.083 to

.08519

.095 to

.097.010 1/64

201 through

2841/8 .139

±.004

.113 to

.11518

.124 to

.128.010 1/32

309 through

3953/16 .210

±.005

.173 to

.17617

.190 to

.193.015 1/32

425 through

4751/4 .275

±.006

.234 to

.23815

.255 to

.257.015 1/16

Special 3/8 .375 ±.007

.319 to

.32314

.350 to

.358.020 3/32



66°

Mean GrooveDiameter CoincidesWith MeanO-ring Diameter.

L

G

R

R1

Finishes are RMS values

Half Dovetail Grooves

O-Ring Half Dovetail GroovesRadius “R” is CRITICAL. Insufficient radius will potentially cause damage to the O-ring during installation, while excessive radius may contribute to extrusion.

44 GLAND DESIGNS

Static Crush Seal Grooves

Triangular GroovesThis type of crush seal is used where cost and ease of machining are important. The O-Ring is confined in a triangular recess made by machining a 45 degree angle on the male cover. The OD of the ring should be about the same as the recess diameter. The same sealing principle applies to crush type seals used in recesses of straight thread tubing bosses. Pressures are limited only by clearances and the strength of the mating parts. The O-Rings are permanently deformed.


Size Number

WO-Ring CS Actual

in +/- mm +/-

LGland Depth

in+

(- 0.000) mm+

(- 0.000)004

through 050

0.070 0.003 1.78 0.08 0.092 0.003 2.34 0.08

102 through

1780.103 0.003 2.62 0.08 0.136 0.005 3.45 0.13

201 through

2840.139 0.004 3.53 0.10 0.184 0.007 4.67 0.18

309 through

3950.210 0.005 5.33 0.13 0.277 0.010 7.04 0.25

425 through

4750.275 0.006 6.99 0.15 0.363 0.015 9.22 0.38

Various Sizes

0.059 0.003 1.50 0.08 0.078 0.003 1.98 0.08

0.078 0.003 2.00 0.08 0.104 0.003 2.64 0.08

0.098 0.003 2.50 0.08 0.130 0.005 3.30 0.13

0.118 0.004 3.00 0 .10 0.156 0.005 3.96 0.13

0.157 0.005 4.00 0.13 0.208 0.007 5.28 0.18

0.197 0.005 5.00 0.13 0.260 0.010 6.61 0.25

0.236 0.006 6.00 0.15 0.312 0.010 7.93 0.25

0.315 0.007 8.00 0.18 0.416 0.015 10.57 0.38

0.354 0.007 9.00 0.18 0.468 0.015 11.89 0.38


Size Number

WO-Ring CS Actual

in +/- mm +/-

LGland Depth

in+

(- 0.000) mm+

(- 0.000)004

through 050

0.070 0.003 1.78 0.08 0.092 0.003 2.34 0.08

102 through

1780.103 0.003 2.62 0.08 0.136 0.005 3.45 0.13

201 through

2840.139 0.004 3.53 0.10 0.184 0.007 4.67 0.18

309 through

3950.210 0.005 5.33 0.13 0.277 0.010 7.04 0.25

425 through

4750.275 0.006 6.99 0.15 0.363 0.015 9.22 0.38

Various Sizes

0.059 0.003 1.50 0.08 0.078 0.003 1.98 0.08

0.078 0.003 2.00 0.08 0.104 0.003 2.64 0.08

0.098 0.003 2.50 0.08 0.130 0.005 3.30 0.13

0.118 0.004 3.00 0 .10 0.156 0.005 3.96 0.13

0.157 0.005 4.00 0.13 0.208 0.007 5.28 0.18

0.197 0.005 5.00 0.13 0.260 0.010 6.61 0.25

0.236 0.006 6.00 0.15 0.312 0.010 7.93 0.25

0.315 0.007 8.00 0.18 0.416 0.015 10.57 0.38

0.354 0.007 9.00 0.18 0.468 0.015 11.89 0.38

45

General Notes

46 SIZING CHARTS

Sizing ChartsThe following charts provide dimensions for standard shrinkage materials only. These correspond to AS568 dimensions. O-rings manufactured from compounds with different shrinkage rates will provide slightly different dimensions and tolerances when standard tooling is used. Custom tooling may be necessary for some compounds in order to meet AS568 dimensions and tolerances. For further information contact a Zatkoff Seals & Packings Representative.• The rubber compound must be added when ordering by the 2-size number (i.e., N0674 2-007).• This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to

AS568 dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates, see Zatkoff Product catalog.

• Please note: for 2-001 cross-section width = .040 in (1,02 mm) for 2-002 cross-section width = .050 in (1,27 mm) for 2-003 cross-section width = .060 in (1,52 mm)

2-xxx Sizes, Cross-Section: .070 ± .003 in

(1,78 ± 0,08mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-001* .029 .004 0,74 0,102-002* .042 .004 1,07 0,102-003* .056 .004 1,42 0,102-004 .070 .005 1,78 0,132-005 .101 .005 2,57 0,132-006 .114 .005 2,90 0,132-007 .145 .005 3,68 0,132-008 .176 .005 4,47 0,132-009 .208 .005 5,28 0,132-010 .239 .005 6,07 0,132-011 .301 .005 7,65 0,132-012 .364 .005 9,25 0,132-013 .426 .005 10,82 0,132-014 .489 .005 12,42 0,132-015 .551 .007 14,00 0,182-016 .614 .009 15,60 0,232-017 .676 .009 17,17 0,232-018 .739 .009 18,77 0,232-019 .801 .009 20,35 0,232-020 .864 .009 21,95 0,232-021 .926 .009 23,52 0,232-022 .989 .010 25,12 0,252-023 1.051 .010 26,70 0,252-024 1.114 .010 28,30 0,252-025 1.176 .011 29,87 0,28


(1,78 ± 0,08mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-026 1.239 .011 31,47 0,282-027 1.301 .011 33,05 0,282-028 1.364 .013 34,65 0,332-029 1.489 .013 37,82 0,332-030 1.614 .013 41,00 0,332-031 1.739 .015 44,17 0,382.032 1.864 .015 47,35 0,382-033 1.989 .018 50,52 0,462-034 2.114 .018 53,70 0,462-035 2.239 .018 56,87 0,462-036 2.364 .018 60,05 0,462-037 2.489 .018 63,22 0,462-038 2,614 .020 66,40 0,512-039 2.739 .020 69,57 0,512-040 2.864 .020 72,75 0,512-041 2.989 .024 75,92 0,612-042 3.239 .024 82,27 0,612-043 3.489 .024 88,62 0,612-044 3.739 .027 94,97 0,692-045 3.989 .027 101,32 0,692-046 4.239 .030 107,67 0,762-047 4.489 .030 114,02 0,762-048 4.739 .030 120,37 0,762-049 4.989 .037 126,72 0,942-050 5.239 .037 133,07 0,94


(1,78 ± 0,08mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-001* .029 .004 0,74 0,102-002* .042 .004 1,07 0,102-003* .056 .004 1,42 0,102-004 .070 .005 1,78 0,132-005 .101 .005 2,57 0,132-006 .114 .005 2,90 0,132-007 .145 .005 3,68 0,132-008 .176 .005 4,47 0,132-009 .208 .005 5,28 0,132-010 .239 .005 6,07 0,132-011 .301 .005 7,65 0,132-012 .364 .005 9,25 0,132-013 .426 .005 10,82 0,132-014 .489 .005 12,42 0,132-015 .551 .007 14,00 0,182-016 .614 .009 15,60 0,232-017 .676 .009 17,17 0,232-018 .739 .009 18,77 0,232-019 .801 .009 20,35 0,232-020 .864 .009 21,95 0,232-021 .926 .009 23,52 0,232-022 .989 .010 25,12 0,252-023 1.051 .010 26,70 0,252-024 1.114 .010 28,30 0,252-025 1.176 .011 29,87 0,28


(1,78 ± 0,08mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-026 1.239 .011 31,47 0,282-027 1.301 .011 33,05 0,282-028 1.364 .013 34,65 0,332-029 1.489 .013 37,82 0,332-030 1.614 .013 41,00 0,332-031 1.739 .015 44,17 0,382.032 1.864 .015 47,35 0,382-033 1.989 .018 50,52 0,462-034 2.114 .018 53,70 0,462-035 2.239 .018 56,87 0,462-036 2.364 .018 60,05 0,462-037 2.489 .018 63,22 0,462-038 2,614 .020 66,40 0,512-039 2.739 .020 69,57 0,512-040 2.864 .020 72,75 0,512-041 2.989 .024 75,92 0,612-042 3.239 .024 82,27 0,612-043 3.489 .024 88,62 0,612-044 3.739 .027 94,97 0,692-045 3.989 .027 101,32 0,692-046 4.239 .030 107,67 0,762-047 4.489 .030 114,02 0,762-048 4.739 .030 120,37 0,762-049 4.989 .037 126,72 0,942-050 5.239 .037 133,07 0,94

47SIZING CHARTS


(2,62 ± 0,08mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-102 .049 .005 1,24 0,132-103 .081 .005 2,06 0,132-104 .112 .005 2,84 0,132-105 .143 .005 3,63 0,132-106 .174 .005 4,42 0,132-107 .206 .005 5,23 0,132-108 .237 .005 6,02 0,132-109 .299 .005 7,59 0,132-110 .362 .005 9,19 0,132-111 .424 .005 10,77 0,132-112 .487 .005 12,37 0,132-113 .549 .007 13,94 0,182-114 .612 .009 15,54 0,232-115 .674 .009 17,12 0,232-116 .737 .009 18,72 0,232-117 .799 .010 20,30 0,252-118 .862 .010 21,89 0,252-119 .924 .010 23,47 0,252-120 .987 .010 25,07 0,252-121 1.049 .010 26,64 0,252-122 1.112 .010 28,24 0,252-123 1.174 .012 29,82 0,302-124 1.237 .012 31,42 0,302-125 1.299 .012 32,99 0,302-126 1.362 .012 34,59 0,302-127 1.424 .012 36,17 0,302-128 1.487 .012 37,77 0,302-129 1.549 .015 39,34 0,382-130 1.612 .015 40,94 0,382-131 1.674 .015 42,52 0,382-132 1.737 .015 44,12 0,382-133 1.799 .015 45,69 0,382-134 1.862 .015 47,29 0,382-135 1.925 .017 48,90 0,432-136 1.987 .017 50,47 0,432-137 2.050 .017 52,07 0,432-138 2.112 .017 53,64 0,432-139 2.175 .017 55,25 0,432-140 2.237 .017 56,82 0,43


(2,62 ± 0,08mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-141 2.300 .020 58,42 0,512-142 2.362 .020 59,99 0,512-143 2.425 .020 61,60 0,512-144 2.487 .020 63,17 0,512-145 2.550 .020 64,77 0,512-146 2.612 .020 66,34 0,512-147 2.675 .022 67,95 0,562-148 2.737 .022 69,52 0,562-149 2.800 .022 71,12 0,562-150 2.862 .022 72,69 0,562-151 2.987 0.24 75,87 0,612-152 3.237 .024 82,22 0,612-153 3.487 .024 88,57 0,612-154 3.737 .028 94,92 0,712-155 3.987 .028 101,27 0,712-156 4.237 .030 107,62 0,762-157 4.487 .030 113,97 0,762-158 4.737 .030 120,32 0,762-159 4.987 .035 126,67 0,892-160 5.237 .035 133,02 0,892-161 5.487 .035 139,37 0,892-162 5.737 .035 145,72 0,892-163 5.987 .035 152,07 0,892-164 6.237 .040 158,42 1,022-165 6.487 .040 167,77 1,022-166 6.737 .040 171,12 1,022-167 6.987 .040 177,47 1,022-168 7.237 .045 183,82 1,142-169 7.487 .045 190,17 1,142-170 7.737 .045 196,52 1,142-171 7.987 .045 202,87 1,142-172 8.237 .050 209,22 1,272-173 8.487 .050 215,57 1,272-174 8.737 .050 221,92 1,272-175 8.987 .050 228,27 1,272-176 9.237 .055 234,62 1,402-177 9.487 .055 240,97 1,402-178 9.737 .055 247,32 1,40


(2,62 ± 0,08mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-102 .049 .005 1,24 0,132-103 .081 .005 2,06 0,132-104 .112 .005 2,84 0,132-105 .143 .005 3,63 0,132-106 .174 .005 4,42 0,132-107 .206 .005 5,23 0,132-108 .237 .005 6,02 0,132-109 .299 .005 7,59 0,132-110 .362 .005 9,19 0,132-111 .424 .005 10,77 0,132-112 .487 .005 12,37 0,132-113 .549 .007 13,94 0,182-114 .612 .009 15,54 0,232-115 .674 .009 17,12 0,232-116 .737 .009 18,72 0,232-117 .799 .010 20,30 0,252-118 .862 .010 21,89 0,252-119 .924 .010 23,47 0,252-120 .987 .010 25,07 0,252-121 1.049 .010 26,64 0,252-122 1.112 .010 28,24 0,252-123 1.174 .012 29,82 0,302-124 1.237 .012 31,42 0,302-125 1.299 .012 32,99 0,302-126 1.362 .012 34,59 0,302-127 1.424 .012 36,17 0,302-128 1.487 .012 37,77 0,302-129 1.549 .015 39,34 0,382-130 1.612 .015 40,94 0,382-131 1.674 .015 42,52 0,382-132 1.737 .015 44,12 0,382-133 1.799 .015 45,69 0,382-134 1.862 .015 47,29 0,382-135 1.925 .017 48,90 0,432-136 1.987 .017 50,47 0,432-137 2.050 .017 52,07 0,432-138 2.112 .017 53,64 0,432-139 2.175 .017 55,25 0,432-140 2.237 .017 56,82 0,43


(2,62 ± 0,08mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-141 2.300 .020 58,42 0,512-142 2.362 .020 59,99 0,512-143 2.425 .020 61,60 0,512-144 2.487 .020 63,17 0,512-145 2.550 .020 64,77 0,512-146 2.612 .020 66,34 0,512-147 2.675 .022 67,95 0,562-148 2.737 .022 69,52 0,562-149 2.800 .022 71,12 0,562-150 2.862 .022 72,69 0,562-151 2.987 0.24 75,87 0,612-152 3.237 .024 82,22 0,612-153 3.487 .024 88,57 0,612-154 3.737 .028 94,92 0,712-155 3.987 .028 101,27 0,712-156 4.237 .030 107,62 0,762-157 4.487 .030 113,97 0,762-158 4.737 .030 120,32 0,762-159 4.987 .035 126,67 0,892-160 5.237 .035 133,02 0,892-161 5.487 .035 139,37 0,892-162 5.737 .035 145,72 0,892-163 5.987 .035 152,07 0,892-164 6.237 .040 158,42 1,022-165 6.487 .040 167,77 1,022-166 6.737 .040 171,12 1,022-167 6.987 .040 177,47 1,022-168 7.237 .045 183,82 1,142-169 7.487 .045 190,17 1,142-170 7.737 .045 196,52 1,142-171 7.987 .045 202,87 1,142-172 8.237 .050 209,22 1,272-173 8.487 .050 215,57 1,272-174 8.737 .050 221,92 1,272-175 8.987 .050 228,27 1,272-176 9.237 .055 234,62 1,402-177 9.487 .055 240,97 1,402-178 9.737 .055 247,32 1,40

48 SIZING CHARTS


(3,53 ± 0,10mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-201 .171 .055 4,34 0,132-202 .234 .005 5,94 0,132-203 .296 .005 7,52 0,132-204 .359 .005 9,12 0,132-205 .421 .005 10,69 0,132-206 .484 .005 12,29 0,132-207 .546 .007 13,87 0,182-208 .609 .009 15,47 0,232-209 .671 .009 17,04 0,232-210 .734 .010 18,64 0,252-211 .796 .010 20,22 0,252-212 .859 .010 21,82 0,252-213 .921 .010 23,39 0,252-214 .984 .010 24,99 0,252-215 1.046 .010 26,57 0,252-216 1.109 .012 28,17 0,302-217 1.171 .012 29,74 0,302-218 1.234 .012 31,34 0,302-219 1.296 .012 32,92 0,302-220 1.359 .012 34,52 0,302-221 1.421 .012 36,09 0,302-222 1.484 .015 37,69 0,382-223 1.609 .015 40,87 0,382-224 1.734 .015 44,04 0,382-225 1.859 .018 47,22 0,382-226 1.984 .018 50,39 0,462-227 2.109 .018 53,57 0,462-228 2.234 .020 56,74 0,512-229 2.359 .020 59,92 0,512-230 2.484 .020 63,09 0,512-231 2.609 .020 66,27 0,512-232 2.734 .024 69,44 0,602-233 2.859 .024 72,62 0,612-234 2.984 .024 75,79 0,612-235 3.109 .024 78,97 0,612-236 3.234 .024 82,14 0,612.237 3.359 .024 85,32 0,612-238 3.484 .024 88,49 0,612-239 3.609 .028 91,67 0,712-240 3.734 .028 94,84 0,712-241 3.859 .028 98,02 0,712-242 3.984 .028 101,19 0,71


(3,53 ± 0,10mm)Parker

No.

Inside Dia. in.

Tol. ±in.

Inside Dia. mm

Tol. ±

mm2-243 4.109 .028 104,37 0,712-244 4.234 .030 107,54 0,762-245 4.359 .030 110,72 0,762-246 4.484 .030 113,89 0,762-247 4.609 .030 117,07 0,762-248 4.734 .030 120,24 0,762-249 4.859 .035 123,42 0,892-250 4.984 .035 126,59 0,892-251 5.109 .035 129,77 0,892-252 5.234 .035 132,94 0,892-253 5.359 .035 136,12 0,892-254 5.484 .035 139,29 0,892-255 5.609 .035 142,47 0,892-256 5.734 .035 145,64 0,892-257 5.859 .035 148,82 0,892-258 5.984 .035 151,99 0,892-259 6.234 .040 158,34 1,022-260 6.484 .040 164,69 1,022-261 6.734 .040 171,04 1,022-262 6.984 .040 177,39 1,022-263 7.234 .045 183,74 1,142-264 7.484 .045 190,09 1,142-265 7.734 .045 196,44 1,142-266 7.984 .045 202,79 1,142-267 8.234 .050 209,14 1,272-268 8.484 .050 215,49 1,272-269 8.734 .050 221,84 1,272-270 8.984 .050 228,19 1,272-271 9.234 .055 234,54 1,402-272 9.484 .055 240,89 1,402-273 9.734 .055 247,24 1,402-274 9.984 .055 253,59 1,402-275 10.484 .055 266,29 1,402-276 10.984 .065 278,99 1,652-277 11.484 .065 291,69 1,652-278 11.984 .065 304,39 1,652-279 12.984 .065 329,79 1,652-280 13.984 .065 355,19 1,652-281 14.984 .065 380,59 1,652-282 15.955 .075 405,26 1,912-283 16.955 .080 430,66 2,032-284 17.955 .085 456,06 2,16


(3,53 ± 0,10mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-201 .171 .055 4,34 0,132-202 .234 .005 5,94 0,132-203 .296 .005 7,52 0,132-204 .359 .005 9,12 0,132-205 .421 .005 10,69 0,132-206 .484 .005 12,29 0,132-207 .546 .007 13,87 0,182-208 .609 .009 15,47 0,232-209 .671 .009 17,04 0,232-210 .734 .010 18,64 0,252-211 .796 .010 20,22 0,252-212 .859 .010 21,82 0,252-213 .921 .010 23,39 0,252-214 .984 .010 24,99 0,252-215 1.046 .010 26,57 0,252-216 1.109 .012 28,17 0,302-217 1.171 .012 29,74 0,302-218 1.234 .012 31,34 0,302-219 1.296 .012 32,92 0,302-220 1.359 .012 34,52 0,302-221 1.421 .012 36,09 0,302-222 1.484 .015 37,69 0,382-223 1.609 .015 40,87 0,382-224 1.734 .015 44,04 0,382-225 1.859 .018 47,22 0,382-226 1.984 .018 50,39 0,462-227 2.109 .018 53,57 0,462-228 2.234 .020 56,74 0,512-229 2.359 .020 59,92 0,512-230 2.484 .020 63,09 0,512-231 2.609 .020 66,27 0,512-232 2.734 .024 69,44 0,602-233 2.859 .024 72,62 0,612-234 2.984 .024 75,79 0,612-235 3.109 .024 78,97 0,612-236 3.234 .024 82,14 0,612.237 3.359 .024 85,32 0,612-238 3.484 .024 88,49 0,612-239 3.609 .028 91,67 0,712-240 3.734 .028 94,84 0,712-241 3.859 .028 98,02 0,712-242 3.984 .028 101,19 0,71


(3,53 ± 0,10mm)Parker

No.

Inside Dia. in.

Tol. ±in.

Inside Dia. mm

Tol. ±

mm2-243 4.109 .028 104,37 0,712-244 4.234 .030 107,54 0,762-245 4.359 .030 110,72 0,762-246 4.484 .030 113,89 0,762-247 4.609 .030 117,07 0,762-248 4.734 .030 120,24 0,762-249 4.859 .035 123,42 0,892-250 4.984 .035 126,59 0,892-251 5.109 .035 129,77 0,892-252 5.234 .035 132,94 0,892-253 5.359 .035 136,12 0,892-254 5.484 .035 139,29 0,892-255 5.609 .035 142,47 0,892-256 5.734 .035 145,64 0,892-257 5.859 .035 148,82 0,892-258 5.984 .035 151,99 0,892-259 6.234 .040 158,34 1,022-260 6.484 .040 164,69 1,022-261 6.734 .040 171,04 1,022-262 6.984 .040 177,39 1,022-263 7.234 .045 183,74 1,142-264 7.484 .045 190,09 1,142-265 7.734 .045 196,44 1,142-266 7.984 .045 202,79 1,142-267 8.234 .050 209,14 1,272-268 8.484 .050 215,49 1,272-269 8.734 .050 221,84 1,272-270 8.984 .050 228,19 1,272-271 9.234 .055 234,54 1,402-272 9.484 .055 240,89 1,402-273 9.734 .055 247,24 1,402-274 9.984 .055 253,59 1,402-275 10.484 .055 266,29 1,402-276 10.984 .065 278,99 1,652-277 11.484 .065 291,69 1,652-278 11.984 .065 304,39 1,652-279 12.984 .065 329,79 1,652-280 13.984 .065 355,19 1,652-281 14.984 .065 380,59 1,652-282 15.955 .075 405,26 1,912-283 16.955 .080 430,66 2,032-284 17.955 .085 456,06 2,16

49SIZING CHARTS


(5,33 ± 0,13mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-309 .412 .005 10,46 0,132-310 .475 .005 12,07 0,132-311 .537 .007 13,64 0,182-312 .600 .009 15,24 0,232-313 .662 .009 16,81 0,232-314 .725 .010 18,42 0,252-315 .787 .010 19,99 0,252-316 .850 .010 21,59 0,252-317 .912 .010 23,16 0,252-318 .975 .010 24,77 0,252-319 1.037 .010 26,34 0,252-320 1.100 .012 27,94 0,302-321 1.162 .012 29,51 0,302-322 1.225 .012 31,12 0,302-323 1.287 .012 32,69 0,302-324 1.350 .012 34,29 0,302-325 1.475 .015 37,47 0,382-326 1.600 .015 40,64 0,382-327 1.725 .015 43,82 0,382-328 1.850 .015 46,99 0,382-329 1.975 .018 50,17 0,462-330 2.10 .018 53,34 0,462-331 2.225 .018 56,52 0,462-332 2.350 .018 59,69 0,462-333 2.475 .020 62,87 0,512-334 2.600 .020 66,04 0,512-335 2.725 .020 69,22 0,512-336 2.850 .020 72,39 0,612-337 2.975 .024 75,57 0,612-338 3.100 .024 78,74 0,612-339 3.225 .024 81,92 0,612-340 3.350 .024 85,09 0,612-341 3.475 .024 88,27 0,612-342 3.600 .028 91,44 0,712-343 3.725 .028 94,62 0,712-344 3.850 .028 97,79 0,712-345 3.975 .028 100,97 0,712-346 4.100 .028 104,14 0,712-347 4.225 .030 107,32 0,762-348 4.350 .030 110,49 0,762-349 4.475 .030 113,67 0,762-350 4.600 .030 116,84 0,762-351 4.725 .030 120,02 0,762-352 4.850 .030 123,19 0,76


(5,33 ± 0,13mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-353 4.975 .037 126,37 0,942-354 5.100 .037 129,54 0,942-355 5.225 .037 132,72 0,942-356 5.350 .037 135,89 0,942-357 5.475 .037 139,07 0,942-358 5.600 .037 142,24 0,942-359 5.725 .037 145,42 0,942-360 5.850 .037 148,59 0,942-361 5.975 .037 151,77 0,942-362 6.225 .040 158,12 1,022-363 6.475 .040 164,47 1,022-364 6.725 .040 170,82 1,022-365 6.975 .040 177,17 1,022-366 7.225 .045 183,52 1,142-367 7.475 .045 189,87 1,142-368 7.725 .045 196,22 1,142-369 7.975 .045 202,57 1,142-370 8.225 .050 208,92 1,272-371 8.475 .050 215,27 1,272-372 8.725 .050 221,62 1,272-373 8.975 .050 227,97 1,272-374 9.225 .055 234,32 1,402-375 9.475 .055 240,67 1,402-376 9.725 .055 247,02 1,402-377 9.975 .055 253,37 1,402-378 10.475 .060 266,07 1,522-379 10.975 .060 278,77 1,522-380 11.475 .065 291,47 1,652-381 11.975 .065 304,17 1,652-382 12.975 .065 329,57 1,652-383 13.975 .070 354,97 1,782-384 14.975 .070 380,37 1,782-385 15.955 .075 405,26 1,912-386 16.955 .080 430,66 2,032-387 17.955 .085 456,06 2,162-388 18.955 .090 481,41 2,292-389 19.955 .095 506,81 2,412-390 20.955 .095 532,21 2,412-391 21.955 .100 557,61 2,542-392 22.940 .105 582,68 2,672-393 23.940 .110 608,08 2,792-394 24.940 .115 633,48 2,922-395 25.940 .120 658,88 3,05


(5,33 ± 0,13mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-309 .412 .005 10,46 0,132-310 .475 .005 12,07 0,132-311 .537 .007 13,64 0,182-312 .600 .009 15,24 0,232-313 .662 .009 16,81 0,232-314 .725 .010 18,42 0,252-315 .787 .010 19,99 0,252-316 .850 .010 21,59 0,252-317 .912 .010 23,16 0,252-318 .975 .010 24,77 0,252-319 1.037 .010 26,34 0,252-320 1.100 .012 27,94 0,302-321 1.162 .012 29,51 0,302-322 1.225 .012 31,12 0,302-323 1.287 .012 32,69 0,302-324 1.350 .012 34,29 0,302-325 1.475 .015 37,47 0,382-326 1.600 .015 40,64 0,382-327 1.725 .015 43,82 0,382-328 1.850 .015 46,99 0,382-329 1.975 .018 50,17 0,462-330 2.10 .018 53,34 0,462-331 2.225 .018 56,52 0,462-332 2.350 .018 59,69 0,462-333 2.475 .020 62,87 0,512-334 2.600 .020 66,04 0,512-335 2.725 .020 69,22 0,512-336 2.850 .020 72,39 0,612-337 2.975 .024 75,57 0,612-338 3.100 .024 78,74 0,612-339 3.225 .024 81,92 0,612-340 3.350 .024 85,09 0,612-341 3.475 .024 88,27 0,612-342 3.600 .028 91,44 0,712-343 3.725 .028 94,62 0,712-344 3.850 .028 97,79 0,712-345 3.975 .028 100,97 0,712-346 4.100 .028 104,14 0,712-347 4.225 .030 107,32 0,762-348 4.350 .030 110,49 0,762-349 4.475 .030 113,67 0,762-350 4.600 .030 116,84 0,762-351 4.725 .030 120,02 0,762-352 4.850 .030 123,19 0,76


(5,33 ± 0,13mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-353 4.975 .037 126,37 0,942-354 5.100 .037 129,54 0,942-355 5.225 .037 132,72 0,942-356 5.350 .037 135,89 0,942-357 5.475 .037 139,07 0,942-358 5.600 .037 142,24 0,942-359 5.725 .037 145,42 0,942-360 5.850 .037 148,59 0,942-361 5.975 .037 151,77 0,942-362 6.225 .040 158,12 1,022-363 6.475 .040 164,47 1,022-364 6.725 .040 170,82 1,022-365 6.975 .040 177,17 1,022-366 7.225 .045 183,52 1,142-367 7.475 .045 189,87 1,142-368 7.725 .045 196,22 1,142-369 7.975 .045 202,57 1,142-370 8.225 .050 208,92 1,272-371 8.475 .050 215,27 1,272-372 8.725 .050 221,62 1,272-373 8.975 .050 227,97 1,272-374 9.225 .055 234,32 1,402-375 9.475 .055 240,67 1,402-376 9.725 .055 247,02 1,402-377 9.975 .055 253,37 1,402-378 10.475 .060 266,07 1,522-379 10.975 .060 278,77 1,522-380 11.475 .065 291,47 1,652-381 11.975 .065 304,17 1,652-382 12.975 .065 329,57 1,652-383 13.975 .070 354,97 1,782-384 14.975 .070 380,37 1,782-385 15.955 .075 405,26 1,912-386 16.955 .080 430,66 2,032-387 17.955 .085 456,06 2,162-388 18.955 .090 481,41 2,292-389 19.955 .095 506,81 2,412-390 20.955 .095 532,21 2,412-391 21.955 .100 557,61 2,542-392 22.940 .105 582,68 2,672-393 23.940 .110 608,08 2,792-394 24.940 .115 633,48 2,922-395 25.940 .120 658,88 3,05

50 SIZING CHARTS


(6,99 ± 0,15mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-451 10.975 .060 278,77 1,522-452 11.475 .060 291,47 1,522-453 11.975 .060 304,17 1,522-454 12.475 .060 316,87 1,522-455 12.975 .060 329,57 1,522-456 13.475 .070 342,27 1,782-457 13.975 .070 354,97 1,782-458 14.475 .070 367,67 1,782-459 14.975 .070 380,37 1,782-460 15.475 .070 393,07 1,782-461 15.955 .075 405,26 1,912-462 16.455 .075 417,96 1,912-463 16.955 .080 430,66 2,032-464 17.455 .085 443,36 2,162-465 17.955 .085 456,06 2,162-466 18.455 .085 468,76 2,162-467 18.955 .090 481,46 2,292-468 19.455 .090 494,16 2,292-469 19.955 .095 506,86 2,412-470 20.955 .095 532,26 2,412-471 21.955 .100 557,66 2,542-472 22.940 .105 582,68 2,672-473 23.940 .110 608,08 2,792-474 24.940 .115 633,48 2,922-475 25.940 .120 658,88 3,05


(6,99 ± 0,15mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-425 4.475 .033 113,67 0,842-426 4.600 .033 116,84 0,842-427 4.725 .033 120,02 0,842-428 4.850 .033 123,19 0,842-429 4.975 .037 126,37 0,942-430 5.100 .037 129,54 0,942-431 5.225 .037 132,72 0,942-432 5.350 .037 135,89 0,942-433 5.475 .037 139,07 0,942-434 5.600 .037 142,24 0,942-435 5.725 .037 145,42 0,942-436 5.850 .037 148,59 0,942-437 5.975 .037 151,77 0,942-438 6.225 .040 158,12 1,022-439 6.475 .040 164,47 1,022-440 6.725 .040 170,82 1,022-441 6.975 .040 177,17 1,022-442 7.225 .045 183,52 1,142-443 7.475 .045 189,87 1,142-444 7.725 .045 196,22 1,142-445 7.975 .045 202,57 1,142-446 8.475 .055 215,27 1,402-447 8.975 .055 227,97 1,402-448 9.475 .055 240,67 1,402-449 9.975 .055 253,37 1,402-450 10.475 .060 266,07 1,52


(6,99 ± 0,15mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-451 10.975 .060 278,77 1,522-452 11.475 .060 291,47 1,522-453 11.975 .060 304,17 1,522-454 12.475 .060 316,87 1,522-455 12.975 .060 329,57 1,522-456 13.475 .070 342,27 1,782-457 13.975 .070 354,97 1,782-458 14.475 .070 367,67 1,782-459 14.975 .070 380,37 1,782-460 15.475 .070 393,07 1,782-461 15.955 .075 405,26 1,912-462 16.455 .075 417,96 1,912-463 16.955 .080 430,66 2,032-464 17.455 .085 443,36 2,162-465 17.955 .085 456,06 2,162-466 18.455 .085 468,76 2,162-467 18.955 .090 481,46 2,292-468 19.455 .090 494,16 2,292-469 19.955 .095 506,86 2,412-470 20.955 .095 532,26 2,412-471 21.955 .100 557,66 2,542-472 22.940 .105 582,68 2,672-473 23.940 .110 608,08 2,792-474 24.940 .115 633,48 2,922-475 25.940 .120 658,88 3,05


(6,99 ± 0,15mm)Parker

No.

Inside Dia. in.

Tol. ±

in.

Inside Dia. mm

Tol. ±

mm2-425 4.475 .033 113,67 0,842-426 4.600 .033 116,84 0,842-427 4.725 .033 120,02 0,842-428 4.850 .033 123,19 0,842-429 4.975 .037 126,37 0,942-430 5.100 .037 129,54 0,942-431 5.225 .037 132,72 0,942-432 5.350 .037 135,89 0,942-433 5.475 .037 139,07 0,942-434 5.600 .037 142,24 0,942-435 5.725 .037 145,42 0,942-436 5.850 .037 148,59 0,942-437 5.975 .037 151,77 0,942-438 6.225 .040 158,12 1,022-439 6.475 .040 164,47 1,022-440 6.725 .040 170,82 1,022-441 6.975 .040 177,17 1,022-442 7.225 .045 183,52 1,142-443 7.475 .045 189,87 1,142-444 7.725 .045 196,22 1,142-445 7.975 .045 202,57 1,142-446 8.475 .055 215,27 1,402-447 8.975 .055 227,97 1,402-448 9.475 .055 240,67 1,402-449 9.975 .055 253,37 1,402-450 10.475 .060 266,07 1,52

(a) The rubber compound must be added when ordering by the 3-size number (i.e., N0552 3-910). (b) Material with unusual shrinkage during molding will give slightly different dimensions.

3-9xx Sizes

Parker No. ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

W mm

Tol.±

mm3-901 .185 .005 .056 .003 4,70 0,13 1,42 0,083-902 .239 .005 .064 .003 6,07 0,13 1,63 0,083-903 .301 .005 .064 .003 7,65 0,13 1,63 0,083-904 .351 .005 .072 .003 8,92 0,13 1,83 0,083-905 .414 .005 .072 .003 10,52 0,13 1,83 0,083-906 .468 .005 .078 .003 11,89 0,13 1,98 0,083-907 .530 .007 .082 .003 13,46 0,18 2,08 0,083-908 .644 .009 .087 .003 16,36 0,23 2,21 0,083-909 .706 .009 .097 .003 17,93 0,23 2,46 0,083-910 .755 .009 .097 .003 19,18 0,23 2,46 0,083-911 .863 .009 .116 .004 21,92 0,23 2,95 0,103-912 .924 .009 .116 .004 23,47 0,23 2,95 0,103-913 .986 .010 .116 .004 25,04 0,26 2,95 0,103-914 1.047 .010 .116 .004 26,59 0,26 2,95 0,103-916 1.171 .010 .116 .004 29,74 0,26 2,95 0,103-918 1.355 .012 .116 .004 34,42 0,30 2,95 0,103-920 1.475 .014 .118 .004 37,47 0,36 3,00 0,103-924 1.720 .014 .118 .004 43,69 0,36 3,00 0,103-928 2.090 .018 .118 .004 53,09 0,46 3,00 0,103-932 2.337 .018 .118 .004 59,36 0,46 3,00 0,10

O-Rings for Metric Tube Fittings (ISO 6149) (Similar to SAE J2244)Parker O-Ring Division is tooled in these sizes for Nitrile and Fluorocarbon rubber only. Contact the division for availability.

Port O-Ring Name Parker Part No.

ID mm Tol. ± mm W

mm Tol. ± mm

M8x1 M8 ISO O-Ring 0024-0063 6,10 0,13 1,60 0,08M10x1 M10 ISO O-Ring 0031-9063 8,10 0,13 1,60 0,08

M12x1.5 M12 ISO O-Ring 0036-6087 9,30 0,13 2,20 0,08M14x1.5 M14 ISO O-Ring 0044-5087 11,30 0,13 2,20 0,08M16x1.5 M16 ISO O-Ring 0052-4087 13,30 0,15 2,20 0,08M18x1.5 M18 ISO O-Ring 0060-2087 15,30 0,18 2,20 0,08M22x1.5 M22 ISO O-Ring 0076-0087 19,30 0,20 2,20 0,08M27x2 M27 ISO O-Ring 0092-9114 23,60 0,23 2,90 0,10M33x2 M33 ISO O-Ring 0116-5114 29,60 0,30 2,90 0,10M42x2 M42 ISO O-Ring 0152-0114 38,60 0,36 2,90 0,10M48x2 M48 ISO O-Ring 0175-6114 44,60 0,41 2,90 0,10M60x2 M60 ISO O-Ring 0222-8114 56,60 0,46 2,90 0,10

The following charts provide dimensions for standard shrinkage materials only. These correspond to AS568B dimensions. O-rings manufactured from compounds with different shrinkage rates will provide slightly different dimensions and tolerances when standard tooling is used. Custom tooling may be necessary for some compounds in order to meet AS568B dimensions and tolerances. Contact a Zatkoff Seals & Packings Representative with any questions.


51SIZING CHARTS


3-9xx Sizes

Parker No. ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

W mm

Tol.±

mm3-901 .185 .005 .056 .003 4,70 0,13 1,42 0,083-902 .239 .005 .064 .003 6,07 0,13 1,63 0,083-903 .301 .005 .064 .003 7,65 0,13 1,63 0,083-904 .351 .005 .072 .003 8,92 0,13 1,83 0,083-905 .414 .005 .072 .003 10,52 0,13 1,83 0,083-906 .468 .005 .078 .003 11,89 0,13 1,98 0,083-907 .530 .007 .082 .003 13,46 0,18 2,08 0,083-908 .644 .009 .087 .003 16,36 0,23 2,21 0,083-909 .706 .009 .097 .003 17,93 0,23 2,46 0,083-910 .755 .009 .097 .003 19,18 0,23 2,46 0,083-911 .863 .009 .116 .004 21,92 0,23 2,95 0,103-912 .924 .009 .116 .004 23,47 0,23 2,95 0,103-913 .986 .010 .116 .004 25,04 0,26 2,95 0,103-914 1.047 .010 .116 .004 26,59 0,26 2,95 0,103-916 1.171 .010 .116 .004 29,74 0,26 2,95 0,103-918 1.355 .012 .116 .004 34,42 0,30 2,95 0,103-920 1.475 .014 .118 .004 37,47 0,36 3,00 0,103-924 1.720 .014 .118 .004 43,69 0,36 3,00 0,103-928 2.090 .018 .118 .004 53,09 0,46 3,00 0,103-932 2.337 .018 .118 .004 59,36 0,46 3,00 0,10



ID mm Tol. ± mm W

mm Tol. ± mm




3-9xx Sizes

Parker No. ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

W mm

Tol.±

mm3-901 .185 .005 .056 .003 4,70 0,13 1,42 0,083-902 .239 .005 .064 .003 6,07 0,13 1,63 0,083-903 .301 .005 .064 .003 7,65 0,13 1,63 0,083-904 .351 .005 .072 .003 8,92 0,13 1,83 0,083-905 .414 .005 .072 .003 10,52 0,13 1,83 0,083-906 .468 .005 .078 .003 11,89 0,13 1,98 0,083-907 .530 .007 .082 .003 13,46 0,18 2,08 0,083-908 .644 .009 .087 .003 16,36 0,23 2,21 0,083-909 .706 .009 .097 .003 17,93 0,23 2,46 0,083-910 .755 .009 .097 .003 19,18 0,23 2,46 0,083-911 .863 .009 .116 .004 21,92 0,23 2,95 0,103-912 .924 .009 .116 .004 23,47 0,23 2,95 0,103-913 .986 .010 .116 .004 25,04 0,26 2,95 0,103-914 1.047 .010 .116 .004 26,59 0,26 2,95 0,103-916 1.171 .010 .116 .004 29,74 0,26 2,95 0,103-918 1.355 .012 .116 .004 34,42 0,30 2,95 0,103-920 1.475 .014 .118 .004 37,47 0,36 3,00 0,103-924 1.720 .014 .118 .004 43,69 0,36 3,00 0,103-928 2.090 .018 .118 .004 53,09 0,46 3,00 0,103-932 2.337 .018 .118 .004 59,36 0,46 3,00 0,10



ID mm Tol. ± mm W

mm Tol. ± mm




3-9xx Sizes

Parker No. ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

W mm

Tol.±

mm3-901 .185 .005 .056 .003 4,70 0,13 1,42 0,083-902 .239 .005 .064 .003 6,07 0,13 1,63 0,083-903 .301 .005 .064 .003 7,65 0,13 1,63 0,083-904 .351 .005 .072 .003 8,92 0,13 1,83 0,083-905 .414 .005 .072 .003 10,52 0,13 1,83 0,083-906 .468 .005 .078 .003 11,89 0,13 1,98 0,083-907 .530 .007 .082 .003 13,46 0,18 2,08 0,083-908 .644 .009 .087 .003 16,36 0,23 2,21 0,083-909 .706 .009 .097 .003 17,93 0,23 2,46 0,083-910 .755 .009 .097 .003 19,18 0,23 2,46 0,083-911 .863 .009 .116 .004 21,92 0,23 2,95 0,103-912 .924 .009 .116 .004 23,47 0,23 2,95 0,103-913 .986 .010 .116 .004 25,04 0,26 2,95 0,103-914 1.047 .010 .116 .004 26,59 0,26 2,95 0,103-916 1.171 .010 .116 .004 29,74 0,26 2,95 0,103-918 1.355 .012 .116 .004 34,42 0,30 2,95 0,103-920 1.475 .014 .118 .004 37,47 0,36 3,00 0,103-924 1.720 .014 .118 .004 43,69 0,36 3,00 0,103-928 2.090 .018 .118 .004 53,09 0,46 3,00 0,103-932 2.337 .018 .118 .004 59,36 0,46 3,00 0,10



ID mm Tol. ± mm W

mm Tol. ± mm



52 SIZING CHARTS

Parker Series 5-XXX O-Ring SizesThe following 5-XXX sizes are O-rings of non-standard dimensions for which Parker tooling was available as of April 1, 2004. This tooling will be maintained while volume demand continues. A mold scrapped as defective will not be replaced unless demand justifies the expense. Please note 5-XXX tooling does not exist for ULTRA Family compounds.Note: These molds are cut to allow for standard “AN” shrinkage and in materials having standard shrinkage they will normally produce rings to the dimensions listed. Materials with other than standard shrinkage will give different dimensions and tolerances. Please consult your local Zatkoff Seals & Packings Representative for the availability of special sizes not included in this list.

5-xxx SizesParker

No.ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-118 0.059 0.004 0.040 0.003 1.50 0.10 1.02 0.08

5-187 0.070 0.005 0.036 0.003 1.78 0.13 0.91 0.08

5-051 0.070 0.005 0.040 0.003 1.78 0.13 1.02 0.08

5-101 0.100 0.005 0.038 0.003 2.54 0.13 0.97 0.08

5-578 0.102 0.005 0.074 0.003 2.59 0.13 1.88 0.08

5-632 0.110 0.005 0.040 0.003 2.79 0.13 1.02 0.08

5-102 0.116 0.005 0.038 0.003 2.95 0.13 0.97 0.08

5-178 0.120 0.005 0.040 0.003 3.05 0.13 1.02 0.08

5-683 0.122 0.005 0.063 0.003 3.10 0.13 1.60 0.08

5-646 0.126 0.005 0.040 0.003 3.20 0.13 1.02 0.08

5-103 0.128 0.005 0.050 0.003 3.25 0.13 1.27 0.08

5-190 0.132 0.005 0.070 0.003 3.35 0.13 1.78 0.08

5-579 0.133 0.005 0.074 0.003 3.39 0.13 1.88 0.08

5-669 0.146 0.005 0.040 0.003 3.71 0.13 1.02 0.08

5-148 0.154 0.005 0.038 0.003 3.91 0.13 0.97 0.08

5-105 0.154 0.005 0.050 0.003 3.91 0.13 1.27 0.08

5-106 0.154 0.005 0.066 0.003 3.91 0.13 1.68 0.08

5-580 0.165 0.005 0.074 0.003 4.19 0.13 1.88 0.08

5-193 0.176 0.005 0.040 0.003 4.47 0.13 1.02 0.08

5-108 0.176 0.005 0.050 0.003 4.47 0.13 1.27 0.08

5-124 0.176 0.005 0.056 0.003 4.47 0.13 1.42 0.08

5-107 0.176 0.005 0.066 0.003 4.47 0.13 1.68 0.08

5-125 0.180 0.005 0.040 0.003 4.57 0.13 1.02 0.08

5-581 0.192 0.005 0.074 0.003 4.88 0.13 1.88 0.08

5-685 0.208 0.005 0.094 0.003 5.28 0.13 2.39 0.08

5-582 0.224 0.005 0.074 0.003 5.69 0.13 1.88 0.08

53SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-194 0.228 0.005 0.040 0.003 5.79 0.13 1.02 0.08

5-638 0.233 0.005 0.076 0.003 5.92 0.13 1.93 0.08

5-179 0.239 0.005 0.040 0.003 6.07 0.13 1.02 0.08

5-151 0.239 0.005 0.051 0.003 6.07 0.13 1.30 0.08

5-127 0.239 0.005 0.074 0.003 6.07 0.13 1.88 0.08

5-197 0.242 0.005 0.040 0.003 6.15 0.13 1.02 0.08

5-180 0.248 0.005 0.048 0.003 6.30 0.13 1.22 0.08

5-686 0.248 0.005 0.094 0.003 6.30 0.13 2.39 0.08

5-583 0.251 0.005 0.074 0.003 6.38 0.13 1.88 0.08

5-052 0.270 0.005 0.070 0.003 6.86 0.13 1.78 0.08

5-202 0.278 0.005 0.046 0.003 7.06 0.13 1.17 0.08

5-698 0.283 0.005 0.040 0.003 7.19 0.13 1.02 0.08

5-584 0.283 0.005 0.074 0.003 7.19 0.13 1.88 0.08

5-687 0.287 0.005 0.094 0.003 7.29 0.13 2.39 0.08

5-1004 0.290 0.005 0.045 0.003 7.39 0.13 1.14 0.08

5-056 0.301 0.005 0.038 0.003 7.65 0.13 0.97 0.08

5-710 0.301 0.005 0.054 0.003 7.65 0.13 1.37 0.08

5-673 0.305 0.005 0.074 0.003 7.75 0.13 1.88 0.08

5-204 0.312 0.005 0.036 0.003 7.92 0.13 0.91 0.08

5-205 0.312 0.005 0.092 0.003 7.92 0.13 2.34 0.08

5-160 0.312 0.005 0.103 0.003 7.92 0.13 2.62 0.08

5-712 0.313 0.005 0.051 0.003 7.95 0.13 1.30 0.08

5-585 0.314 0.005 0.074 0.003 7.98 0.13 1.88 0.08

5-664 0.320 0.005 0.070 0.003 8.13 0.13 1.78 0.08

5-1006 0.322 0.005 0.070 0.003 8.18 0.13 1.78 0.08

5-206 0.326 0.005 0.103 0.003 8.28 0.13 2.62 0.08

5-1007 0.330 0.005 0.050 0.003 8.38 0.13 1.27 0.08

5-133 0.332 0.005 0.031 0.003 8.43 0.13 0.79 0.08

5-612 0.344 0.005 0.070 0.003 8.74 0.13 1.78 0.08

5-586 0.350 0.005 0.074 0.003 8.89 0.13 1.88 0.08

5-587 0.350 0.005 0.106 0.004 8.89 0.13 2.69 0.10

5-699 0.353 0.005 0.094 0.003 8.97 0.13 2.39 0.08

5-700 0.354 0.005 0.118 0.004 8.99 0.13 3.00 0.10

5-716 0.362 0.005 0.118 0.004 9.19 0.13 3.00 0.10

5-057 0.364 0.005 0.045 0.003 9.25 0.13 1.14 0.08

54 SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-209 0.370 0.005 0.040 0.003 9.40 0.13 1.02 0.08

5-211 0.375 0.005 0.187 0.005 9.53 0.13 4.75 0.13

5-212 0.384 0.005 0.070 0.003 9.75 0.13 1.78 0.08

5-614 0.391 0.005 0.103 0.003 9.93 0.13 2.62 0.08

5-718 0.395 0.005 0.040 0.003 10.03 0.13 1.02 0.08

5-134 0.410 0.005 0.031 0.003 10.41 0.13 0.79 0.08

5-588 0.413 0.005 0.106 0.004 10.49 0.13 2.69 0.10

5-002 0.416 0.005 0.059 0.003 10.57 0.13 1.50 0.08

5-215 0.418 0.005 0.094 0.003 10.62 0.13 2.39 0.08

5-218 0.425 0.005 0.025 0.003 10.80 0.13 0.64 0.08

5-682 0.426 0.005 0.040 0.003 10.82 0.13 1.02 0.08

5-058 0.426 0.005 0.050 0.003 10.82 0.13 1.27 0.08

5-613 0.437 0.005 0.070 0.003 11.10 0.13 1.78 0.08

5-1011 0.447 0.005 0.103 0.003 11.35 0.13 2.62 0.08

5-223 0.458 0.005 0.053 0.003 11.63 0.13 1.35 0.08

5-225 0.469 0.006 0.094 0.003 11.91 0.15 2.39 0.08

5-615 0.469 0.006 0.103 0.003 11.91 0.15 2.62 0.15

5-652 0.473 0.006 0.071 0.003 12.01 0.15 1.80 0.08

5-566 0.489 0.006 0.055 0.003 12.42 0.15 1.40 0.08

5-230 0.500 0.006 0.125 0.004 12.70 0.15 3.18 0.10

5-231 0.501 0.006 0.062 0.003 12.73 0.15 1.57 0.08

5-675 0.508 0.006 0.049 0.003 12.90 0.15 1.24 0.08

5-616 0.516 0.006 0.103 0.003 13.11 0.15 2.62 0.08

5-1014 0.525 0.007 0.071 0.003 13.34 0.18 1.80 0.08

5-135 0.526 0.007 0.031 0.003 13.36 0.18 0.79 0.08

5-162 0.554 0.007 0.070 0.003 14.07 0.18 1.78 0.08

5-239 0.570 0.007 0.106 0.004 14.48 0.18 2.69 0.10

5-156 0.575 0.007 0.060 0.003 14.61 0.18 1.52 0.08

5-563 0.583 0.007 0.040 0.003 14.81 0.18 1.02 0.08

5-735 0.583 0.007 0.103 0.003 14.81 0.18 2.62 0.08

5-736 0.590 0.007 0.070 0.003 14.99 0.18 1.78 0.08

5-591 0.594 0.007 0.106 0.004 15.09 0.18 2.69 0.10

5-609 0.600 0.007 0.094 0.003 15.24 0.18 2.39 0.08

5-243 0.604 0.007 0.103 0.003 15.34 0.18 2.62 0.08

5-676 0.610 0.007 0.058 0.003 15.49 0.18 1.47 0.08

55SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-247 0.623 0.007 0.125 0.004 15.82 0.18 3.18 0.10

5-248 0.625 0.007 0.050 0.003 15.88 0.18 1.27 0.08

5-617 0.625 0.007 0.103 0.003 15.88 0.18 2.62 0.08

5-250 0.627 0.007 0.062 0.003 15.93 0.18 1.57 0.08

5-251 0.631 0.007 0.062 0.003 16.03 0.18 1.57 0.08

5-005 0.640 0.007 0.080 0.003 16.26 0.18 2.03 0.08

5-136 0.643 0.007 0.031 0.003 16.33 0.18 0.79 0.08

5-643 0.650 0.007 0.045 0.003 16.51 0.18 1.14 0.08

5-252 0.652 0.007 0.070 0.003 16.56 0.18 1.78 0.08

5-254 0.660 0.007 0.064 0.003 16.76 0.18 1.63 0.08

5-592 0.665 0.007 0.106 0.004 16.89 0.18 2.69 0.10

5-256 0.707 0.008 0.103 0.003 17.96 0.20 2.62 0.08

5-594 0.720 0.008 0.141 0.004 18.29 0.20 3.58 0.10

5-257 0.722 0.008 0.113 0.004 18.34 0.20 2.87 0.10

5-593 0.724 0.008 0.106 0.004 18.39 0.20 2.69 0.10

5-181 0.725 0.008 0.040 0.003 18.42 0.20 1.02 0.08

5-964 0.744 0.008 0.109 0.004 18.90 0.20 2.77 0.10

5-263 0.750 0.008 0.061 0.003 19.05 0.20 1.55 0.08

5-264 0.752 0.008 0.070 0.003 19.10 0.20 1.78 0.08

5-266 0.766 0.008 0.080 0.003 19.46 0.20 2.03 0.08

5-137 0.775 0.008 0.031 0.003 19.69 0.20 0.79 0.08

5-595 0.779 0.008 0.141 0.004 19.79 0.20 3.58 0.10

5-006 0.796 0.008 0.080 0.003 20.22 0.20 2.03 0.08

5-751 0.820 0.009 0.150 0.005 20.83 0.23 3.81 0.13

5-003 0.836 0.009 0.059 0.003 21.23 0.23 1.50 0.08

5-596 0.838 0.009 0.141 0.004 21.29 0.23 3.58 0.10

5-708 0.850 0.009 0.045 0.003 21.59 0.23 1.14 0.08

5-753 0.857 0.009 0.123 0.004 21.77 0.23 3.12 0.10

5-273 0.879 0.009 0.040 0.003 22.33 0.23 1.02 0.08

5-138 0.898 0.009 0.031 0.003 22.81 0.23 0.79 0.08

5-597 0.905 0.009 0.141 0.004 22.99 0.23 3.58 0.10

5-598 0.968 0.010 0.141 0.004 24.59 0.25 3.58 0.10

5-139 0.987 0.010 0.031 0.003 25.07 0.25 0.79 0.08

5-709 1.000 0.010 0.055 0.003 25.40 0.25 1.40 0.08

5-677 1.004 0.010 0.081 0.003 25.50 0.25 2.06 0.08

56 SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-618 1.016 0.010 0.139 0.004 25.81 0.25 3.53 0.10

5-599 1.031 0.010 0.141 0.004 26.19 0.25 3.58 0.10

5-004 1.070 0.010 0.065 0.003 27.18 0.25 1.65 0.08

5-763 1.080 0.010 0.050 0.003 27.43 0.25 1.27 0.08

5-600 1.094 0.010 0.141 0.004 27.79 0.25 3.58 0.10

5-140 1.112 0.010 0.031 0.003 28.24 0.25 0.79 0.08

5-601 1.153 0.012 0.141 0.004 29.29 0.30 3.58 0.10

5-291 1.186 0.012 0.070 0.003 30.12 0.30 1.78 0.08

5-602 1.212 0.012 0.141 0.004 30.78 0.30 3.58 0.10

5-294 1.213 0.012 0.149 0.004 30.81 0.30 3.78 0.10

5-295 1.225 0.012 0.275 0.006 31.12 0.30 6.99 0.15

5-141 1.226 0.012 0.031 0.003 31.14 0.30 0.79 0.08

5-296 1.229 0.012 0.070 0.003 31.22 0.30 1.78 0.08

5-603 1.279 0.012 0.141 0.004 32.49 0.30 3.58 0.10

5-157 1.338 0.012 0.092 0.003 33.99 0.30 2.34 0.08

5-604 1.342 0.012 0.141 0.004 34.09 0.30 3.58 0.10

5-605 1.401 0.014 0.141 0.004 35.59 0.36 3.58 0.10

5-780 1.412 0.014 0.073 0.003 35.86 0.36 1.85 0.08

5-008 1.421 0.014 0.080 0.003 36.09 0.36 2.03 0.08

5-670 1.437 0.014 0.070 0.003 36.40 0.36 1.78 0.08

5-142 1.450 0.014 0.047 0.003 36.83 0.36 1.19 0.08

5-657 1.465 0.014 0.103 0.003 37.21 0.36 2.62 0.08

5-606 1.468 0.014 0.141 0.004 37.29 0.36 3.58 0.10

5-980 1.475 0.014 0.275 0.006 37.47 0.36 6.99 0.15

5-024 1.515 0.015 0.125 0.004 38.48 0.38 3.18 0.10

5-320 1.540 0.015 0.070 0.003 39.12 0.38 1.78 0.08

5-158 1.550 0.015 0.092 0.003 39.37 0.38 2.34 0.08

5-009 1.553 0.015 0.080 0.003 39.45 0.38 2.03 0.08

5-321 1.559 0.015 0.139 0.004 39.60 0.38 3.53 0.10

5-788 1.591 0.015 0.071 0.003 40.41 0.38 1.80 0.08

5-327 1.640 0.015 0.139 0.004 41.66 0.38 3.53 0.10

5-143 1.670 0.015 0.047 0.003 42.42 0.38 1.19 0.08

5-329 1.670 0.015 0.070 0.003 42.42 0.38 1.78 0.08

5-1018 1.671 0.015 0.139 0.004 42.44 0.38 3.53 0.10

5-330 1.674 0.015 0.210 0.005 42.52 0.38 5.33 0.13

57SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-671 1.680 0.015 0.080 0.003 42.67 0.38 2.03 0.08

5-025 1.765 0.016 0.125 0.004 44.83 0.41 3.18 0.10

5-035 1.786 0.016 0.139 0.004 45.36 0.41 3.53 0.10

5-1023 1.788 0.016 0.070 0.003 45.42 0.41 1.78 0.08

5-335 1.802 0.016 0.062 0.003 45.77 0.41 1.57 0.08

5-794 1.812 0.016 0.070 0.003 46.02 0.41 1.78 0.08

5-795 1.850 0.016 0.070 0.003 46.99 0.41 1.78 0.08

5-981 1.850 0.016 0.275 0.006 46.99 0.41 6.99 0.15

5-337 1.873 0.016 0.062 0.003 47.57 0.41 1.57 0.08

5-1043 1.882 0.017 0.118 0.004 47.80 0.43 3.00 0.10

5-144 1.891 0.017 0.047 0.003 48.03 0.43 1.19 0.08

5-796 1.913 0.017 0.070 0.003 48.59 0.43 1.78 0.08

5-338 1.925 0.017 0.210 0.005 48.90 0.43 5.33 0.13

5-342 1.980 0.017 0.038 0.003 50.29 0.43 0.97 0.08

5-655 2.020 0.018 0.070 0.003 51.31 0.46 1.78 0.08

5-037 2.036 0.018 0.139 0.004 51.71 0.46 3.53 0.10

5-642 2.051 0.018 0.070 0.003 52.10 0.46 1.78 0.08

5-1044 2.060 0.018 0.139 0.004 52.32 0.46 3.53 0.10

5-027 2.140 0.018 0.125 0.004 54.36 0.46 3.18 0.10

5-1046 2.140 0.018 0.315 0.010 54.36 0.46 8.00 0.25

5-145 2.141 0.018 0.047 0.003 54.38 0.46 1.19 0.08

5-347 2.163 0.018 0.062 0.003 54.94 0.46 1.57 0.08

5-348 2.172 0.018 0.070 0.003 55.17 0.46 1.78 0.08

5-800 2.225 0.018 0.275 0.006 56.52 0.46 6.99 0.15

5-015 2.296 0.020 0.080 0.003 58.32 0.51 2.03 0.08

5-702 2.312 0.020 0.139 0.004 58.72 0.51 3.53 0.10

5-039 2.411 0.020 0.139 0.004 61.24 0.51 3.53 0.10

5-354 2.471 0.020 0.070 0.003 62.76 0.51 1.78 0.08

5-703 2.563 0.020 0.139 0.004 65.10 0.51 3.53 0.10

5-358 2.576 0.020 0.082 0.003 65.43 0.51 2.08 0.08

5-361 2.671 0.022 0.139 0.004 67.84 0.56 3.53 0.10

5-159 2.683 0.022 0.115 0.004 68.15 0.56 2.92 0.10

5-982 2.725 0.022 0.275 0.006 69.22 0.56 6.99 0.15

5-704 2.812 0.022 0.139 0.004 71.42 0.56 3.53 0.10

5-697 2.878 0.022 0.080 0.003 73.10 0.56 2.03 0.08

58 SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-367 2.924 0.022 0.103 0.003 74.27 0.56 2.62 0.08

5-705 2.937 0.022 0.139 0.004 74.60 0.56 3.53 0.10

5-044 3.036 0.024 0.139 0.004 77.11 0.61 3.53 0.10

5-369 3.037 0.024 0.103 0.003 77.14 0.61 2.62 0.08

5-810 3.041 0.024 0.062 0.003 77.24 0.61 1.57 0.08

5-374 3.112 0.024 0.070 0.003 79.04 0.61 1.78 0.08

5-557 3.125 0.024 0.103 0.003 79.38 0.61 2.62 0.08

5-815 3.156 0.024 0.060 0.003 80.16 0.61 1.52 0.08

5-045 3.161 0.024 0.139 0.004 80.29 0.61 3.53 0.10

5-816 3.162 0.024 0.070 0.003 80.31 0.61 1.78 0.08

5-984 3.225 0.024 0.275 0.006 81.92 0.61 6.99 0.15

5-821 3.300 0.026 0.070 0.003 83.82 0.66 1.78 0.08

5-825 3.350 0.026 0.275 0.006 85.09 0.66 6.99 0.15

5-1053 3.354 0.026 0.070 0.003 85.19 0.66 1.78 0.08

5-979 3.443 0.026 0.275 0.006 87.45 0.66 6.99 0.15

5-381 3.475 0.026 0.275 0.006 88.27 0.66 6.99 0.15

5-985 3.600 0.026 0.275 0.006 91.44 0.66 6.99 0.15

5-031 3.640 0.028 0.125 0.004 92.46 0.71 3.18 0.10

5-986 3.725 0.028 0.275 0.006 94.62 0.71 6.99 0.15

5-390 3.957 0.028 0.147 0.004 100.51 0.71 3.73 0.10

5-987 3.975 0.028 0.275 0.006 100.97 0.71 6.99 0.15

5-833 4.085 0.030 0.103 0.003 103.76 0.76 2.62 0.08

5-394 4.096 0.030 0.070 0.003 104.04 0.76 1.78 0.08

5-988 4.100 0.030 0.275 0.006 104.14 0.76 6.99 0.15

5-395 4.117 0.030 0.070 0.003 104.57 0.76 1.78 0.08

5-396 4.171 0.030 0.070 0.003 105.94 0.76 1.78 0.08

5-989 4.225 0.030 0.275 0.006 107.32 0.76 6.99 0.15

5-060 4.390 0.030 0.044 0.003 111.51 0.76 1.12 0.08

5-401 4.531 0.030 0.070 0.003 115.09 0.76 1.78 0.08

5-402 4.750 0.035 0.188 0.005 120.65 0.89 4.78 0.13

5-850 4.925 0.035 0.260 0.006 125.10 0.89 6.60 0.15

5-403 4.930 0.035 0.103 0.003 125.22 0.89 2.62 0.08

5-852 5.030 0.035 0.210 0.005 127.76 0.89 5.33 0.13

5-853 5.057 0.035 0.233 0.006 128.45 0.89 5.92 0.15

5-407 5.249 0.035 0.123 0.004 133.32 0.89 3.12 0.10

59SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol.±

mm

Width mm

Tol. ±

mm

5-410 5.340 0.035 0.070 0.003 135.64 0.89 1.78 0.08

5-412 5.414 0.035 0.103 0.003 137.52 0.89 2.62 0.08

5-855 5.444 0.035 0.124 0.004 138.28 0.89 3.15 0.10

5-856 5.465 0.035 0.070 0.003 138.81 0.89 1.78 0.08

5-413 5.475 0.035 0.164 0.005 139.07 0.89 4.17 0.13

5-414 5.487 0.035 0.062 0.003 139.37 0.89 1.57 0.08

5-416 5.553 0.035 0.120 0.004 141.05 0.89 3.05 0.10

5-062 5.604 0.040 0.070 0.003 142.34 1.02 1.78 0.08

5-063 5.750 0.040 0.070 0.003 146.05 1.02 1.78 0.08

5-421 5.882 0.040 0.110 0.004 149.40 1.02 2.79 0.10

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-573 5.968 0.040 0.070 0.003 151.59 1.02 1.78 0.08

5-567 5.985 0.040 0.070 0.003 152.02 1.02 1.78 0.08

5-428 6.361 0.040 0.108 0.004 161.57 1.02 2.74 0.10

5-666 6.520 0.040 0.070 0.003 165.61 1.02 1.78 0.08

5-869 6.609 0.045 0.139 0.004 167.87 1.14 3.53 0.10

5-696 7.110 0.045 0.103 0.003 180.59 1.14 2.62 0.08

5-691 7.139 0.045 0.072 0.003 181.33 1.14 1.83 0.08

5-873 7.230 0.045 0.070 0.003 183.64 1.14 1.78 0.08

5-975 7.425 0.045 0.260 0.006 188.60 1.14 6.60 0.15

5-875 7.580 0.050 0.210 0.005 192.53 1.27 5.33 0.13

5-438 7.613 0.050 0.070 0.003 193.37 1.27 1.78 0.08

5-877 7.802 0.050 0.104 0.003 198.17 1.27 2.64 0.08

5-445 8.277 0.050 0.275 0.006 210.24 1.27 6.99 0.15

5-880 8.350 0.050 0.275 0.006 212.09 1.27 6.99 0.15

5-575 8.875 0.055 0.070 0.003 225.42 1.40 1.78 0.08

5-635 9.370 0.055 0.103 0.003 238.00 1.40 2.62 0.08

5-883 9.820 0.060 0.103 0.003 249.43 1.52 2.62 0.08

5-884 9.984 0.060 0.070 0.003 253.59 1.52 1.78 0.08

5-885 10.171 0.060 0.139 0.004 258.34 1.52 3.53 0.10

5-457 10.232 0.060 0.139 0.004 259.89 1.52 3.53 0.10

5-458 10.340 0.060 0.139 0.004 262.64 1.52 3.53 0.10

5-887 10.343 0.060 0.275 0.006 262.71 1.52 6.99 0.15

5-165 10.359 0.060 0.139 0.004 263.12 1.52 3.53 0.10

5-889 10.372 0.060 0.104 0.003 263.45 1.52 2.64 0.08

5-976 10.425 0.060 0.260 0.006 264.80 1.52 6.60 0.15

5-890 10.606 0.060 0.103 0.003 269.39 1.52 2.62 0.08

5-464 10.656 0.060 0.070 0.003 270.66 1.52 1.78 0.08

5-891 10.734 0.060 0.139 0.004 272.64 1.52 3.53 0.10

5-466 10.749 0.060 0.210 0.005 273.03 1.52 5.33 0.10

5-469 10.883 0.060 0.103 0.003 276.43 1.52 2.62 0.08

5-894 10.996 0.060 0.103 0.003 279.30 1.52 2.62 0.10

5-474 11.331 0.060 0.275 0.006 287.81 1.52 6.99 0.15

60 SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-573 5.968 0.040 0.070 0.003 151.59 1.02 1.78 0.08

5-567 5.985 0.040 0.070 0.003 152.02 1.02 1.78 0.08

5-428 6.361 0.040 0.108 0.004 161.57 1.02 2.74 0.10

5-666 6.520 0.040 0.070 0.003 165.61 1.02 1.78 0.08

5-869 6.609 0.045 0.139 0.004 167.87 1.14 3.53 0.10

5-696 7.110 0.045 0.103 0.003 180.59 1.14 2.62 0.08

5-691 7.139 0.045 0.072 0.003 181.33 1.14 1.83 0.08

5-873 7.230 0.045 0.070 0.003 183.64 1.14 1.78 0.08

5-975 7.425 0.045 0.260 0.006 188.60 1.14 6.60 0.15

5-875 7.580 0.050 0.210 0.005 192.53 1.27 5.33 0.13

5-438 7.613 0.050 0.070 0.003 193.37 1.27 1.78 0.08

5-877 7.802 0.050 0.104 0.003 198.17 1.27 2.64 0.08

5-445 8.277 0.050 0.275 0.006 210.24 1.27 6.99 0.15

5-880 8.350 0.050 0.275 0.006 212.09 1.27 6.99 0.15

5-575 8.875 0.055 0.070 0.003 225.42 1.40 1.78 0.08

5-635 9.370 0.055 0.103 0.003 238.00 1.40 2.62 0.08

5-883 9.820 0.060 0.103 0.003 249.43 1.52 2.62 0.08

5-884 9.984 0.060 0.070 0.003 253.59 1.52 1.78 0.08

5-885 10.171 0.060 0.139 0.004 258.34 1.52 3.53 0.10

5-457 10.232 0.060 0.139 0.004 259.89 1.52 3.53 0.10

5-458 10.340 0.060 0.139 0.004 262.64 1.52 3.53 0.10

5-887 10.343 0.060 0.275 0.006 262.71 1.52 6.99 0.15

5-165 10.359 0.060 0.139 0.004 263.12 1.52 3.53 0.10

5-889 10.372 0.060 0.104 0.003 263.45 1.52 2.64 0.08

5-976 10.425 0.060 0.260 0.006 264.80 1.52 6.60 0.15

5-890 10.606 0.060 0.103 0.003 269.39 1.52 2.62 0.08

5-464 10.656 0.060 0.070 0.003 270.66 1.52 1.78 0.08

5-891 10.734 0.060 0.139 0.004 272.64 1.52 3.53 0.10

5-466 10.749 0.060 0.210 0.005 273.03 1.52 5.33 0.10

5-469 10.883 0.060 0.103 0.003 276.43 1.52 2.62 0.08

5-894 10.996 0.060 0.103 0.003 279.30 1.52 2.62 0.10

5-474 11.331 0.060 0.275 0.006 287.81 1.52 6.99 0.15

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-573 5.968 0.040 0.070 0.003 151.59 1.02 1.78 0.08

5-567 5.985 0.040 0.070 0.003 152.02 1.02 1.78 0.08

5-428 6.361 0.040 0.108 0.004 161.57 1.02 2.74 0.10

5-666 6.520 0.040 0.070 0.003 165.61 1.02 1.78 0.08

5-869 6.609 0.045 0.139 0.004 167.87 1.14 3.53 0.10

5-696 7.110 0.045 0.103 0.003 180.59 1.14 2.62 0.08

5-691 7.139 0.045 0.072 0.003 181.33 1.14 1.83 0.08

5-873 7.230 0.045 0.070 0.003 183.64 1.14 1.78 0.08

5-975 7.425 0.045 0.260 0.006 188.60 1.14 6.60 0.15

5-875 7.580 0.050 0.210 0.005 192.53 1.27 5.33 0.13

5-438 7.613 0.050 0.070 0.003 193.37 1.27 1.78 0.08

5-877 7.802 0.050 0.104 0.003 198.17 1.27 2.64 0.08

5-445 8.277 0.050 0.275 0.006 210.24 1.27 6.99 0.15

5-880 8.350 0.050 0.275 0.006 212.09 1.27 6.99 0.15

5-575 8.875 0.055 0.070 0.003 225.42 1.40 1.78 0.08

5-635 9.370 0.055 0.103 0.003 238.00 1.40 2.62 0.08

5-883 9.820 0.060 0.103 0.003 249.43 1.52 2.62 0.08

5-884 9.984 0.060 0.070 0.003 253.59 1.52 1.78 0.08

5-885 10.171 0.060 0.139 0.004 258.34 1.52 3.53 0.10

5-457 10.232 0.060 0.139 0.004 259.89 1.52 3.53 0.10

5-458 10.340 0.060 0.139 0.004 262.64 1.52 3.53 0.10

5-887 10.343 0.060 0.275 0.006 262.71 1.52 6.99 0.15

5-165 10.359 0.060 0.139 0.004 263.12 1.52 3.53 0.10

5-889 10.372 0.060 0.104 0.003 263.45 1.52 2.64 0.08

5-976 10.425 0.060 0.260 0.006 264.80 1.52 6.60 0.15

5-890 10.606 0.060 0.103 0.003 269.39 1.52 2.62 0.08

5-464 10.656 0.060 0.070 0.003 270.66 1.52 1.78 0.08

5-891 10.734 0.060 0.139 0.004 272.64 1.52 3.53 0.10

5-466 10.749 0.060 0.210 0.005 273.03 1.52 5.33 0.10

5-469 10.883 0.060 0.103 0.003 276.43 1.52 2.62 0.08

5-894 10.996 0.060 0.103 0.003 279.30 1.52 2.62 0.10

5-474 11.331 0.060 0.275 0.006 287.81 1.52 6.99 0.15

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-898 11.335 0.060 0.103 0.003 287.91 1.52 2.62 0.08

5-069 11.750 0.070 0.139 0.004 298.45 1.78 3.53 0.10

5-482 12.109 0.070 0.139 0.004 307.57 1.78 3.53 0.10

5-164 12.160 0.070 0.210 0.005 308.86 1.78 5.33 0.13

5-901 12.234 0.070 0.139 0.004 310.74 1.78 3.53 0.10

5-485 12.260 0.070 0.139 0.004 311.40 1.78 3.53 0.10

5-902 12.360 0.070 0.210 0.005 313.94 1.78 5.33 0.13

5-487 12.380 0.070 0.139 0.004 314.45 1.78 3.53 0.10

5-488 12.463 0.070 0.103 0.003 316.56 1.78 2.62 0.08

5-569 12.475 0.070 0.139 0.004 316.87 1.78 3.53 0.10

5-905 12.623 0.070 0.140 0.004 320.62 1.78 3.56 0.10

5-906 12.705 0.070 0.070 0.003 322.71 1.78 1.78 0.08

5-907 12.725 0.070 0.275 0.006 323.22 1.78 6.99 0.15

5-908 12.840 0.070 0.139 0.004 326.14 1.78 3.53 0.10

5-619 12.915 0.070 0.139 0.004 328.04 1.78 3.53 0.10

5-492 13.248 0.070 0.139 0.004 336.50 1.78 3.53 0.10

5-070 13.270 0.070 0.139 0.004 337.06 1.78 3.53 0.10

5-910 13.375 0.070 0.210 0.005 339.73 1.78 5.33 0.13

5-071 13.410 0.070 0.139 0.004 340.61 1.78 3.53 0.10

5-493 13.490 0.070 0.139 0.004 342.65 1.78 3.53 0.10

5-494 13.541 0.070 0.210 0.005 343.94 1.78 5.33 0.13

5-496 13.616 0.070 0.141 0.004 345.85 1.78 3.58 0.10

5-498 13.650 0.070 0.139 0.004 346.71 1.78 3.53 0.10

5-912 13.734 0.070 0.139 0.004 348.84 1.78 3.53 0.10

5-1097 13.750 0.070 0.103 0.003 349.25 1.78 2.62 0.08

5-073 13.820 0.080 0.139 0.004 351.03 2.03 3.53 0.10

5-502 14.088 0.080 0.210 0.005 357.84 2.03 5.33 0.13

5-624 14.111 0.080 0.139 0.004 358.42 2.03 3.53 0.10

5-074 14.234 0.080 0.139 0.004 361.54 2.03 3.53 0.10

5-504 14.430 0.080 0.139 0.004 366.52 2.03 3.53 0.10

5-505 14.470 0.080 0.139 0.004 367.54 2.03 3.53 0.10

5-507 14.600 0.080 0.210 0.005 370.84 2.03 5.33 0.13

61SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-898 11.335 0.060 0.103 0.003 287.91 1.52 2.62 0.08

5-069 11.750 0.070 0.139 0.004 298.45 1.78 3.53 0.10

5-482 12.109 0.070 0.139 0.004 307.57 1.78 3.53 0.10

5-164 12.160 0.070 0.210 0.005 308.86 1.78 5.33 0.13

5-901 12.234 0.070 0.139 0.004 310.74 1.78 3.53 0.10

5-485 12.260 0.070 0.139 0.004 311.40 1.78 3.53 0.10

5-902 12.360 0.070 0.210 0.005 313.94 1.78 5.33 0.13

5-487 12.380 0.070 0.139 0.004 314.45 1.78 3.53 0.10

5-488 12.463 0.070 0.103 0.003 316.56 1.78 2.62 0.08

5-569 12.475 0.070 0.139 0.004 316.87 1.78 3.53 0.10

5-905 12.623 0.070 0.140 0.004 320.62 1.78 3.56 0.10

5-906 12.705 0.070 0.070 0.003 322.71 1.78 1.78 0.08

5-907 12.725 0.070 0.275 0.006 323.22 1.78 6.99 0.15

5-908 12.840 0.070 0.139 0.004 326.14 1.78 3.53 0.10

5-619 12.915 0.070 0.139 0.004 328.04 1.78 3.53 0.10

5-492 13.248 0.070 0.139 0.004 336.50 1.78 3.53 0.10

5-070 13.270 0.070 0.139 0.004 337.06 1.78 3.53 0.10

5-910 13.375 0.070 0.210 0.005 339.73 1.78 5.33 0.13

5-071 13.410 0.070 0.139 0.004 340.61 1.78 3.53 0.10

5-493 13.490 0.070 0.139 0.004 342.65 1.78 3.53 0.10

5-494 13.541 0.070 0.210 0.005 343.94 1.78 5.33 0.13

5-496 13.616 0.070 0.141 0.004 345.85 1.78 3.58 0.10

5-498 13.650 0.070 0.139 0.004 346.71 1.78 3.53 0.10

5-912 13.734 0.070 0.139 0.004 348.84 1.78 3.53 0.10

5-1097 13.750 0.070 0.103 0.003 349.25 1.78 2.62 0.08

5-073 13.820 0.080 0.139 0.004 351.03 2.03 3.53 0.10

5-502 14.088 0.080 0.210 0.005 357.84 2.03 5.33 0.13

5-624 14.111 0.080 0.139 0.004 358.42 2.03 3.53 0.10

5-074 14.234 0.080 0.139 0.004 361.54 2.03 3.53 0.10

5-504 14.430 0.080 0.139 0.004 366.52 2.03 3.53 0.10

5-505 14.470 0.080 0.139 0.004 367.54 2.03 3.53 0.10

5-507 14.600 0.080 0.210 0.005 370.84 2.03 5.33 0.13

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-898 11.335 0.060 0.103 0.003 287.91 1.52 2.62 0.08

5-069 11.750 0.070 0.139 0.004 298.45 1.78 3.53 0.10

5-482 12.109 0.070 0.139 0.004 307.57 1.78 3.53 0.10

5-164 12.160 0.070 0.210 0.005 308.86 1.78 5.33 0.13

5-901 12.234 0.070 0.139 0.004 310.74 1.78 3.53 0.10

5-485 12.260 0.070 0.139 0.004 311.40 1.78 3.53 0.10

5-902 12.360 0.070 0.210 0.005 313.94 1.78 5.33 0.13

5-487 12.380 0.070 0.139 0.004 314.45 1.78 3.53 0.10

5-488 12.463 0.070 0.103 0.003 316.56 1.78 2.62 0.08

5-569 12.475 0.070 0.139 0.004 316.87 1.78 3.53 0.10

5-905 12.623 0.070 0.140 0.004 320.62 1.78 3.56 0.10

5-906 12.705 0.070 0.070 0.003 322.71 1.78 1.78 0.08

5-907 12.725 0.070 0.275 0.006 323.22 1.78 6.99 0.15

5-908 12.840 0.070 0.139 0.004 326.14 1.78 3.53 0.10

5-619 12.915 0.070 0.139 0.004 328.04 1.78 3.53 0.10

5-492 13.248 0.070 0.139 0.004 336.50 1.78 3.53 0.10

5-070 13.270 0.070 0.139 0.004 337.06 1.78 3.53 0.10

5-910 13.375 0.070 0.210 0.005 339.73 1.78 5.33 0.13

5-071 13.410 0.070 0.139 0.004 340.61 1.78 3.53 0.10

5-493 13.490 0.070 0.139 0.004 342.65 1.78 3.53 0.10

5-494 13.541 0.070 0.210 0.005 343.94 1.78 5.33 0.13

5-496 13.616 0.070 0.141 0.004 345.85 1.78 3.58 0.10

5-498 13.650 0.070 0.139 0.004 346.71 1.78 3.53 0.10

5-912 13.734 0.070 0.139 0.004 348.84 1.78 3.53 0.10

5-1097 13.750 0.070 0.103 0.003 349.25 1.78 2.62 0.08

5-073 13.820 0.080 0.139 0.004 351.03 2.03 3.53 0.10

5-502 14.088 0.080 0.210 0.005 357.84 2.03 5.33 0.13

5-624 14.111 0.080 0.139 0.004 358.42 2.03 3.53 0.10

5-074 14.234 0.080 0.139 0.004 361.54 2.03 3.53 0.10

5-504 14.430 0.080 0.139 0.004 366.52 2.03 3.53 0.10

5-505 14.470 0.080 0.139 0.004 367.54 2.03 3.53 0.10

5-507 14.600 0.080 0.210 0.005 370.84 2.03 5.33 0.13

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-508 14.674 0.080 0.139 0.004 372.72 2.03 3.53 0.10

5-166 14.722 0.080 0.139 0.004 373.94 2.03 3.53 0.10

5-920 14.780 0.080 0.175 0.005 375.41 2.03 4.45 0.13

5-921 14.795 0.080 0.071 0.003 375.79 2.03 1.80 0.08

5-512 15.171 0.080 0.139 0.004 385.34 2.03 3.53 0.10

5-077 15.300 0.080 0.139 0.004 388.62 2.03 3.53 0.10

5-924 15.410 0.080 0.210 0.005 391.41 2.03 5.33 0.13

5-079 15.540 0.080 0.139 0.004 394.72 2.03 3.53 0.10

5-515 15.548 0.080 0.210 0.005 394.92 2.03 5.33 0.13

5-516 15.740 0.080 0.139 0.004 399.80 2.03 3.53 0.10

5-517 15.750 0.080 0.275 0.006 400.05 2.03 6.99 0.15

5-518 16.031 0.080 0.256 0.006 407.19 2.03 6.50 0.15

5-571 16.234 0.090 0.139 0.004 412.34 2.29 3.53 0.10

5-930 16.285 0.090 0.250 0.006 413.64 2.29 6.35 0.15

5-520 16.435 0.090 0.139 0.004 417.45 2.29 3.53 0.10

5-524 16.640 0.090 0.210 0.005 422.66 2.29 5.33 0.13

5-622 16.750 0.090 0.275 0.006 425.45 2.29 6.99 0.15

5-525 16.765 0.090 0.125 0.004 425.83 2.29 3.18 0.10

5-935 17.100 0.090 0.275 0.006 434.34 2.29 6.99 0.15

5-526 17.250 0.090 0.187 0.005 438.15 2.29 4.75 0.13

5-082 17.250 0.090 0.240 0.006 438.15 2.29 6.10 0.15

5-937 17.390 0.090 0.139 0.004 441.71 2.29 3.53 0.10

5-529 17.455 0.090 0.139 0.004 443.36 2.29 3.53 0.10

5-939 17.870 0.090 0.210 0.005 453.90 2.29 5.33 0.13

5-084 18.062 0.090 0.281 0.006 458.77 2.29 7.16 0.15

5-533 18.169 0.090 0.096 0.003 461.49 2.29 2.44 0.08

5-085 18.350 0.090 0.210 0.005 466.09 2.29 5.33 0.13

5-1104 18.500 0.090 0.188 0.005 469.90 2.29 4.78 0.13

5-1105 18.635 0.090 0.139 0.004 473.33 2.29 3.53 0.10

5-944 18.880 0.100 0.139 0.004 479.55 2.54 3.53 0.10

5-947 19.380 0.100 0.139 0.004 492.25 2.54 3.53 0.10

62 SIZING CHARTS

5-xxx Sizes

Parker No.

ID in.

Tol. ±

in.

Width in.

Tol. ±

in.

ID mm

Tol. ±

mm

Width mm

Tol. ±

mm

5-541 19.500 0.100 0.250 0.006 495.30 2.54 6.35 0.15

5-948 19.725 0.100 0.210 0.005 501.02 2.54 5.33 0.13

5-950 19.960 0.100 0.139 0.004 506.98 2.54 3.53 0.10

5-1010 20.609 0.100 0.139 0.004 523.47 2.54 3.53 0.10

5-547 21.564 0.100 0.139 0.004 547.73 2.54 3.53 0.10

5-089 23.406 0.120 0.281 0.006 594.51 3.05 7.14 0.15

5-551 23.540 0.120 0.139 0.004 597.92 3.05 3.53 0.10

5-090 23.576 0.120 0.139 0.004 598.83 3.05 3.53 0.10

5-167 23.780 0.120 0.375 0.007 604.01 3.05 9.52 0.18

5-091 25.474 0.120 0.139 0.004 647.04 3.05 3.53 0.10

5-170 25.500 0.120 0.275 0.006 647.70 3.05 6.99 0.15

5-171 26.125 0.120 0.275 0.006 663.58 3.05 6.99 0.15

5-173 26.188 0.120 0.210 0.005 665.18 3.05 5.33 0.13

5-631 26.408 0.120 0.139 0.004 670.76 3.05 3.53 0.10

5-172 27.485 0.120 0.275 0.006 698.12 3.05 6.99 0.15

5-092 27.625 0.120 0.275 0.006 701.68 3.05 6.99 0.15

5-955 28.801 0.140 0.275 0.006 731.55 3.56 6.99 0.15

63

General Notes

64 METRIC O-RINGS

Metric O-RingsStatic Seal – AxialThe O-ring is deformed in the axial direction. Under pressure, the O-ring is subjected to a relative movement.If pressure acts from inside, then the O-ring’s outside diameter should be in contact with the gland outside diameter (optimally compressed between 1 and 3% of circumference).

If pressure acts from outside, then the O-ring’s inside diameter should be in contact with the internal diameter of the gland (up to 6% stretched).

1.50 1.10 1.901.80 1.30 2.40 0.22.00 1.50 2.60 to2.50 2.00 3.20 0.42.65 2.10 3.60

3.00 2.30 3.903.55 2.80 4.804.00 3.25 5.20 0.4 0.25.00 4.00 6.50 to to5.30 4.35 7.20 0.8 0.46.00 5.00 7.80

7.00 5.75 9.608.00 6.80 10.40 0.89.00 7.70 11.70 to10.00 8.70 13.00 1.212.00 10.60 15.60

d2 h+ 0.10 b+ 0.20 r1 r2

Rectangular Gland Dimensions – Axial Deformation

A contact non-pulsating 1.6 6.3 area pulsating 0.8 6.3 B gland diameter non-pulsating 3.2 12.5 and sides pulsating 1.6 6.3

Surface Roughness in mm, load area tp > 50% Surface Pressure Ra Rmax

Surface Roughness – Static Seal

Size OnlyBS = British Metric Standard BS4518R = French StandardISO-3601 = International StandardGR = German Metric RangeSW = Swedish Standard SMS 1588

Dimensions in mm.

G Series JIS B2401 = Japanese Industrial Std.P Series JIS B2401 = Japanese Industrial Std.S Series JIS B2401 = Japanese Industrial Std.V Series JIS B2401 = Japanese Industrial Std.JASO F404 = Japanese Automobile Std. Org.

Pressure FromInside

0° to 5°

B b

O d7 H11/

B

A

h + 0.1

r2

r1

0° to 5°

B b

B

A

h + 0.1

r2

r1

/ dg H11O

65METRIC O-RINGS

Gland Dimensions

1.00 x 0.70 1.40 – – – – 0.201.50 x 1.14 2.40 – – – – 0.301.60 x 1.21 2.40 – – – – 0.301.78-1.80 x x 1.49 2.50 1.50 4.16 1.50 6.16 0.401.78-1.80 x 1.58 2.50 – – – – 0.401.90 x 1.40 2.60 – – – – 0.401.90 x 1.55 2.60 1.55 4.00 1.55 5.40 0.402.00 x x 1.68 2.80 1.70 4.20 1.70 5.60 0.402.40 x 1.80 3.30 2.05 4.70 2.05 6.10 0.502.40 x 2.16 3.30 – – – – 0.502.40 x 1.90 3.20 – – – – 0.502.50 x 2.12 3.50 2.15 4.90 2.15 6.30 0.502.50 x x 2.28 3.50 – – – – 0.502.62-2.65 x x 2.25 3.25 2.28 4.65 2.28 6.50 0.602.62-2.65 x 2.36 3.25 – – – – 0.602.70 x x 2.30 3.60 2.30 5.00 2.30 6.40 0.602.95 x x 2.20 3.90 2.50 5.30 2.50 5.30 0.603.00 x 2.58 4.10 2.60 5.50 2.60 6.90 0.603.00 x 2.72 4.10 – – – – 0.603.00 x 2.45 3.80 – – – – 0.603.10 x x 2.50 4.10 2.70 5.50 2.70 6.90 0.603.50 x x 2.65 4.60 3.05 6.00 3.05 7.40 0.603.53-3.55 x x 2.70 4.80 3.10 6.20 3.10 7.60 0.803.53-3.55 x 3.21 4.40 – – – – 0.803.60 x x 2.80 4.80 3.15 6.20 3.15 7.60 0.804.00 x x 3.46 5.40 3.51 6.80 3.51 8.20 0.804.50 x x 3.50 5.80 4.00 7.50 4.00 9.20 0.805.00 x x 4.45 6.70 4.46 8.50 4.46 10.30 0.805.00 x 4.65 6.70 – – – – 0.805.30-5.33 x x 4.72 6.45 4.75 7.66 4.75 10.26 1.205.30-5.33 x 4.85 6.45 – – – – 1.205.70 x x 4.60 7.20 5.00 8.90 5.00 10.60 1.206.00 x x 5.06 7.60 5.12 9.40 5.12 11.20 1.206.00 x 5.30 7.40 – – – – 1.206.99-7.00 x x 6.05 8.75 6.10 10.12 6.10 13.55 1.506.99-7.00 x 6.22 8.75 – – – – 1.508.40 x 7.65 11.10 7.68 13.30 7.68 15.50 1.508.40 x 7.85 11.10 – – – – 1.508.40 x 7.35 9.10 – – – – 1.50

NO BACK-UP ONE BACK-UP TWO BACK-UP 100 Bar Max >100 Bar >100 Bar Alternating P L P L1 P L2 (mm) (mm) (mm) (mm) (mm) (mm)

C/S PRESSURE d2 (mm) Stat Dynam. Pneum.

RADIUSr1

(mm)

66 METRIC O-RINGS

Dimensional Tolerances (DIN3771/1, ISO 3601/1, NFT 47-501 “G”)


1,80 0,13 – – – –2,00 0,13 – – – –2,24 0,13 – – – –2,50 0,13 – – – –2,80 0,14 – – – –3,15 0,14 – – – –3,55 0,14 – – – –3,75 0,14 – – – –4,00 0,14 – – – –4,50 0,14 – – – –4,87 0,15 – – – –5,00 0,15 – – – –5,15 0,15 – – – –5,30 0,15 – – – –5,60 0,15 – – – –6,00 0,15 – – – –6,30 0,15 – – – –6,70 0,16 – – – –6,90 0,16 – – – –7,10 0,16 – – – –7,50 0,16 – – – –8,00 0,16 – – – –8,50 0,16 – – – –8,76 0,17 – – – –9,00 0,17 – – – –9,50 0,17 – – – –10,00 0,17 – – – –10,60 0,18 – – – –11,20 0,18 – – – –11,80 0,19 – – – –12,50 0,19 – – – –13,20 0,19 – – – –14,00 0,19 0,19 – – –15,00 0,20 0,20 – – –16,00 0,20 0,20 – – –17,00 0,21 0,21 – – –18,00 – 0,21 0,21 – –19,00 – 0,22 0,22 – –20,00 – 0,22 0,22 – –21,20 – 0,23 0,23 – –22,40 – 0,24 0,24 – –23,60 – 0,24 0,24 – –25,00 – 0,25 0,25 – –25,80 – 0,26 0,26 – –26,50 – 0,26 0,26 – –28,00 – 0,28 0,28 – –30,00 – 0,29 0,29 – –31,50 – 0,31 0,31 – –32,50 – 0,32 0,32 – –33,50 – 0,32 0,32 – –34,50 – 0,33 0,33 – –35,50 – 0,34 0,34 – –

ID(mm)TOLL.+(mm)

CROSS-SECTION

1,80

+/-

0,08

2,65

+/-

0,09

3,55

+/-

0,10

5,30

+/-

0,13

7,00

+/-

0,15

36,50 – 0,35 0,35 – –37,50 – 0,36 0,36 – –38,70 – 0,37 0,37 – –40,00 – – 0,38 0,38 –41,20 – – 0,39 0,39 –42,50 – – 0,40 0,40 –43,70 – – 0,41 0,41 –45,00 – – 0,42 0,42 –46,20 – – 0,43 0,43 –47,50 – – 0,44 0,44 –48,70 – – 0,45 0,45 –50,00 – – 0,46 0,46 –51,50 – – 0,47 0,47 –53,00 – – 0,48 0,48 –54,50 – – 0,50 0,50 –56,00 – – 0,51 0,51 –58,00 – – 0,52 0,52 –60,00 – – 0,54 0,54 –61,50 – – 0,55 0,55 –63,00 – – 0,56 0,56 –65,00 – – 0,58 0,58 –67,00 – – 0,59 0,59 –69,00 – – 0,61 0,61 –71,00 – – 0,63 0,63 –73,00 – – 0,64 0,64 –75,00 – – 0,66 0,66 –77,50 – – 0,67 0,67 –80,00 – – 0,69 0,69 –82,50 – – 0,71 0,71 –85,00 – – 0,73 0,73 –87,50 – – 0,75 0,75 –90,00 – – 0,77 0,77 –92,50 – – 0,79 0,79 –95,00 – – 0,81 0,81 –97,50 – – 0,83 0,83 –100,00 – – 0,84 0,84 –103,00 – – 0,87 0,87 –106,00 – – 0,89 0,89 –109,00 – – 0,91 0,91 –112,00 – – 0,93 0,93 –115,00 – – 0,95 0,95 –118,00 – – 0,97 0,97 –122,00 – – 1,00 1,00 –125,00 – – 1,03 1,03 –128,00 – – 1,05 1,05 –132,00 – – 1,08 1,08 –136,00 – – 1,10 1,10 –140,00 – – 1,13 1,13 –145,00 – – 1,17 1,17 –150,00 – – 1,20 1,20 –155,00 – – 1,24 1,24 –160,00 – – 1,27 1,27 –

ID(mm)TOLL.+(mm)

CROSS-SECTION

1,80

+/-

0,08

2,65

+/-

0,09

3,55

+/-

0,10

5,30

+/-

0,13

7,00

+/-

0,15

67METRIC O-RINGS

Dimensional Tolerances (DIN3771/1, ISO 3601/1, NFT 47-501 “G”)

165,00 – – 1,31 1,31 –170,00 – – 1,34 1,34 –175,00 – – 1,38 1,38 –180,00 – – 1,41 1,41 –185,00 – – 1,44 1,44 –190,00 – – 1,48 1,48 –195,00 – – 1,51 1,51 –200,00 – – 1,55 1,55 –206,00 – – – 1,59 1,59212,00 – – – 1,63 1,63218,00 – – – 1,67 1,67224,00 – – – 1,71 1,71230,00 – – – 1,75 1,75236,00 – – – 1,79 1,79243,00 – – – 1,83 1,83250,00 – – – 1,88 1,88258,00 – – – 1,93 1,93265,00 – – – 1,98 1,98272,00 – – – 2,02 2,02280,00 – – – 2,08 2,08290,00 – – – 2,14 2,14300,00 – – – 2,21 2,21307,00 – – – 2,25 2,25315,00 – – – 2,30 2,30325,00 – – – 2,37 2,37335,00 – – – 2,43 2,43345,00 – – – 2,49 2,49355,00 – – – 2,56 2,56365,00 – – – 2,62 2,62375,00 – – – 2,68 2,68387,00 – – – 2,76 2,76400,00 – – – 2,84 2,84412,00 – – – – 2,91425,00 – – – – 2,99437,00 – – – – 3,07450,00 – – – – 3,15462,00 – – – – 3,22475,00 – – – – 3,30487,00 – – – – 3,37500,00 – – – – 3,45515,00 – – – – 3,54530,00 – – – – 3,63545,00 – – – – 3,72560,00 – – – – 3,81580,00 – – – – 3,93600,00 – – – – 4,06615,00 – – – – 4,13630,00 – – – – 4,22650,00 – – – – 4,34670,00 – – – – 4,46

ID(mm)TOLL.+(mm)

CROSS-SECTION

1,80

+/-

0,08

2,65

+/-

0,09

3,55

+/-

0,10

5,30

+/-

0,13

7,00

+/-

0,15

68 METRIC O-RINGS

GermanyDIN 3770 Sealing rings (O-rings) with special accuracy made

of elastomeric materials. This standard should not be used for new designs.

DIN 3771 Part 1

Fluid systems, O-rings, sizes to ISO 3601-1. This standard contains sizes and tolerances of O-rings with

DIN 3771 Part 2

Fluid systems, O-rings, testing, marking. This standard applies to DIN 3771 Part 1, testing and marking of O-rings.

DIN 3771 Part 3 This standard covers materials, their hardness range,

DIN 3771 Part 4

Fluid systems, O-rings, quality acceptance criteria, -

DIN 7715 Rubber parts; tolerances, molded shapes from soft rubber (elastomers).

DIN 7716 Products from rubber; requirements for storage, cleaning, and servicing.

DIN 9088 Aerospace; shelf-life of parts from elastomers (under preparation).

DIN 24 320and requirements.

DIN 40 080 Procedures and tables for inspection by attributes — statistical sampling.

DIN 50 049DIN 51 524

requirements.DIN 51 525

requirements.DIN 51 600 Liquid fuels, leaded petroleum oils; minimum

requirements.DIN 51 601 Liquid fuels, Diesel oil; minimum requirements.DIN 51 603 Part 1

Liquid fuels; heating oils, heating oil EL; minimum requirements.

DIN 51 603 Part 2

Liquid fuels; heating oils, heating oils L. M and S; minimum requirements.

DIN 53 479 Testing of plastics and elastomers; measurement of

DIN 53 504 Testing of elastomers; measurement of tensile strength, maximum stress, elongation at break, and stress values at tensile test.

DIN 53 505 Testing of elastomers; Shore A and D hardness tests.DIN 53 507 Testing of elastomers; determination of tear growth,

strip specimen.DIN 53 512 Testing of rubbers; determination of rebound resil-

ience.DIN 53 516 Testing of rubbers and elastomers; determination of

abrasion resistance.DIN 53 517 Testing of elastomers - determination of compression set.DIN 53 519 Part 1

Testing of elastomers; determination of indentation hardness of soft rubber (IRHD), hardness test on samples.

DIN 53 519 Part 2

Testing of elastomers; determination of indentation hardness of soft rubber (IRHD), microhardness on samples of minor dimensions.

DIN 53 521 Testing of rubber and elastomers; determination of the resistance to liquids, vapors, and gases.

DIN 53 522 Testing of elastomers; determination of resistance to

DIN 53 538 Standard reference elastomer; nitrile-butadiene rubber (NBR), cross-linked by peroxide to characterize work-

DIN 53 545 Testing of rubber; determination of the behavior at low tem-perature (behaviour to cold), principles, testing methods.

DIN 53 670 Testing of rubber or elastomers; testing of rubber in standard text mixtures, equipment, and procedures.

DIN ISO 1629 Rubber and latex; difference and abbreviations.VDMA 24 317

guidelines.LN 9214 Aerospace; toroidal sealing rings (O-rings) for solder-

InternationalISO 3601/1 Fluid systems, O-rings - Part 1. Inner diameters,

cross-sections, tolerances, and size coding.ISO 3601/2 (under preparation)

Fluid systems, O-rings - Part 2. Design criteria for O-ring grooves.

ISO 3601/3 (under preparation)

Fluid systems. O-rings - Part 3. Quality acceptance levels.


Fluid systems, O-rings - Part 4. O-ring grooves with back-up rings.


Fluid systems, O-rings - Part 5. O-rings for connectors to ISO 6149.

United KingdomBS 1806

cross-sections and their tolerances including grooves. O-ring dimensions are identical with the Parker 2-xxx series.

BS 4518groove dimensions. Cross-section diameters are: 1.6 / 2.4 / 3.0 / 5.7 and 8.4 mm

France The following French standards base upon ISO 3601 Parts 1 to 3:NF-T-47-501 is comparable with ISO 3601 Part 1.NF-T-47-502 is comparable with ISO 3601 Part 2.NF-T-47-503 is comparable with ISO 3601 Part 3.French purchase codes R 1 to R 27 are identical with Parker sizes 5-578 to 5-606. R 28 to R 88 are identical with Parker sizes 2-325 to 2-349 and 2-425 to 2-460.

ItalyA committee for seal and hose standardization exists in the UNI which

In certain areas the French R 1 to R 88 are used.

SwedenO-rings are standardized under SMS 1586, Swedish military standard. Cross sections 1.6 / 2.4 / 3.0 / 5.7 and 8.4 mm are recommended.

United StatesAS 568 B (Aerospace Standard)

Published by the SAE (Society of Automotive Engi--

tion tolerances correspond to ISO 3601/1 and DIN 3771 Part 1 (within a few hundredths of a millimeter)

8.2 International O-Ring Standards and Test MethodsInternational O-Ring Standards and Test Methods


69METRIC O-RINGS



DIN 3771 Part 1


DIN 3771 Part 2



DIN 3771 Part 4







DIN 50 049DIN 51 524





DIN 51 603 Part 2









DIN 53 519 Part 2




























8.2 International O-Ring Standards and Test Methods



DIN 3771 Part 1


DIN 3771 Part 2



DIN 3771 Part 4







DIN 50 049DIN 51 524





DIN 51 603 Part 2









DIN 53 519 Part 2






























70 METRIC O-RINGS

Ordering Addresses DIN and DIN ISO standard specifications and VDMA recommendations can be obtained from:

• Beuth Verlag GmbH• Burggrafenstrasse 4-10, D-10787• Berlin

AMS and SAE specifications can be obtained from: • SAE• 400 Commonwealth Dr.• Warrendale, PA 15096-0001

ASTM standard specifications can be obtained from: • ASTM• 100 Barr Harbor Drive. • West Conshohocken, PA 19428

Military specifications can be obtained from: Defense Automated Printing Service 700 Robbins Ave., Building 4/D Philadelphia, PA 19111-5094 ATTN: DODSSP

International O-Ring Standards and Test Methods



DIN 3771 Part 1


DIN 3771 Part 2



DIN 3771 Part 4







DIN 50 049DIN 51 524





DIN 51 603 Part 2









DIN 53 519 Part 2





























71METRIC O-RINGS

ORM Series Metric O-RingsHow To Specify

EPR-70NON-STOCKSTANDARD

FKM-75NON-STOCKSTANDARD

Offers a wide range of fluid compatibility for high temperature service.

TEMP. RANGE: -20°F TO +400°F (-29°C TO +200°C)

70 DUROMETERETHYLENE PROPYLENE

75 DUROMETERFLUOROCARBON

Skydrol and other phosphate esters, water, dilute acids, and alkalis. DO NOT USE IN PETROLEUM PRODUCTS.TEMP. RANGE: -65°F TO +300°F (-54°C TO +149°C)

NBR-70STOCK

STANDARD

Resistant to nearly all hydraulic fluids except certain non-flammable types such as Skydrol. Resistant to air and water.TEMP. RANGE: -40°F TO +250°F (-40°C TO +121°C)

70 DUROMETERNITRILE

NEO-70NON-STOCK STANDARD

Offers ozone and weather resistance.TEMP. RANGE: -65°F TO +300°F (-54°C TO +150°C)

70 DUROMETERNEOPRENE

SIL-70NON-STOCKSTANDARD

Broad temperature range. Good ozone resistance.TEMP. RANGE: -65°F TO +450°F (-54°C TO +232°C)

70 DUROMETERSILICONE

Note: For other materials, please contact your nearest Zatkoff location.

Metric O-rings: Listed in millimeters. Includes all standard Inside Diameters from 0.74mm to 1044mm and Cross Sections (widths) from .30 to 10.00mm. Many sizes in stock and standard metrics constantly restocked to assure immediate delivery.Consult your nearest Zatkoff location for availability of sizes and compounds.Zatkoff can custom-engineer O-rings and seals for prototypes or full production runs for sizes not listed in the ORM Metric Series.

MATERIAL NUMBER

MATERIAL DESCRIPTION

BASIC DESIGN RECOMMENDATIONS

CrossSection

InsideDiameter Std.

0.3 2.490.4 1.400.4 12.500.45 2.020.45 3.500.49 3.900.50 1.000.50 2.000.50 2.200.50 3.05

CrossSection

InsideDiameter Std.

0.51 17.500.55 7.100.55 10.000.56 1.600.60 3.570.60 4.010.60 6.250.60 7.490.60 10.900.62 3.30

CrossSection

InsideDiameter Std.

0.62 3.660.63 1.780.63 3.480.64 5.540.65 4.200.65 6.800.66 2.460.70 1.200.70 1.500.70 16.87

CrossSection

InsideDiameter Std.

0.71 6.300.76 1.780.76 18.210.79 3.610.80 1.800.80 1.920.80 2.000.80 3.400.80 3.700.80 6.35

Cord Material Selection

ORM Series Metric O-Rings

ORM

Series Cross-Section Inside Diameter Material Number

72 METRIC O-RINGS

CrossSection

InsideDiameter Std.

0.80 20.000.80 21.800.80 22.000.89 4.820.90 2.900.90 4.800.90 4.850.90 6.221.00 1.001.00 1.151.00 1.301.00 1.501.00 1.601.00 1.801.00 2.001.00 2.201.00 2.501.00 3.001.00 3.301.00 3.501.00 4.001.00 4.501.00 5.001.00 5.501.00 6.001.00 6.501.00 7.001.00 7.501.00 8.001.00 8.501.00 9.001.00 9.501.00 9.701.00 9.751.00 10.001.00 10.501.00 11.001.00 11.501.00 12.001.00 12.501.00 13.001.00 13.501.00 13.701.00 14.001.00 14.50

CrossSection

InsideDiameter Std.

1.00 15.001.00 15.501.00 16.001.00 16.501.00 17.001.00 17.501.00 17.701.00 18.001.00 18.501.00 19.001.00 19.501.00 20.001.00 20.501.00 21.001.00 21.501.00 21.701.00 22.001.00 22.501.00 23.001.00 23.501.00 24.001.00 24.501.00 25.001.00 26.001.00 26.501.00 27.001.00 27.501.00 28.001.00 28.501.00 29.001.00 30.001.00 31.801.00 32.001.00 33.001.00 34.001.00 35.001.00 38.001.00 39.001.00 40.001.00 42.001.00 43.001.00 45.001.00 46.001.00 48.001.00 49.00

OR

M S

erie

s M

etric

O-R

ings

73METRIC O-RINGS

OR

M S

erie

s M

etric

O-R

ings Cross

SectionInside

Diameter Std.

1.00 50.001.00 50.501.00 53.001.00 55.001.00 60.001.00 61.601.00 63.001.00 63.401.00 64.501.00 70.001.00 75.001.00 76.001.00 77.001.00 85.301.00 90.001.00 92.101.00 94.101.00 100.001.00 110.001.01 111.001.02 0.74 2-0011.02 1.78 5-0511.02 2.541.02 4.571.02 9.401.02 11.661.05 2.901.07 10.801.10 4.401.10 12.501.14 12.571.15 58.00 GR1.17 7.141.20 1.801.20 2.601.20 2.901.20 3.001.20 3.311.20 3.501.20 4.001.20 5.001.20 5.501.20 6.001.20 7.601.20 9.00

CrossSection

InsideDiameter Std.

1.20 10.501.20 11.001.20 11.601.20 15.801.20 18.751.20 22.001.20 23.501.20 24.001.20 30.001.20 34.001.20 39.001.20 40.001.20 45.001.20 46.001.20 50.001.20 55.001.20 63.001.20 86.001.25 0.801.25 1.901.25 2.001.25 5.001.25 5.501.25 8.001.25 9.501.25 14.001.25 16.001.27 1.07 2-0021.27 2.501.27 3.251.27 3.271.27 3.681.27 4.471.27 6.351.27 12.071.27 69.061.27 70.001.30 2.101.30 2.501.30 3.301.30 10.001.30 15.201.30 20.001.30 39.101.30 58.40

74 METRIC O-RINGS

CrossSection

InsideDiameter Std.

1.30 80.001.30 100.001.31 0.631.39 11.511.40 1.801.40 13.461.40 22.001.42 4.70 3-9011.45 38.901.50 1.001.50 1.501.50 1.851.50 2.001.50 2.201.50 2.50 S31.50 2.801.50 3.00 GR1.50 3.201.50 3.301.50 3.50 S41.50 4.00 GR1.50 4.50 S51.50 4.801.50 5.00 GR1.50 5.50 S61.50 5.601.50 5.801.50 6.00 GR1.50 6.50 S71.50 7.00 GR1.50 7.50 S81.50 8.00 GR1.50 8.50 S91.50 9.00 GR1.50 9.50 S101.50 10.00 GR1.50 10.50 S11.21.50 10.701.50 11.00 GR1.50 11.50 S121.50 12.00 GR,S12.51.50 12.501.50 13.00 GR1.50 13.50 S141.50 14.00 GR

CrossSection

InsideDiameter Std.

1.50 14.50 S151.50 15.00 GR1.50 15.50 S161.50 16.00 GR1.50 16.501.50 17.00 GR1.50 17.50 S181.50 18.00 GR1.50 18.501.50 19.00 GR1.50 19.50 S201.50 20.00 GR1.50 20.501.50 21.00 GR1.50 21.50 S221.50 22.00 GR1.50 22.501.50 23.00 GR1.50 23.501.50 24.00 GR1.50 24.501.50 24.801.50 25.00 GR1.50 25.501.50 26.00 GR1.50 26.501.50 27.00 GR1.50 27.501.50 28.00 GR1.50 28.501.50 29.00 GR1.50 29.501.50 30.00 GR1.50 30.501.50 31.00 GR1.50 31.501.50 32.00 GR1.50 32.501.50 33.00 GR1.50 33.501.50 34.00 GR1.50 34.501.50 35.00 GR1.50 35.501.50 36.00 GR

OR

M S

erie

s M

etric

O-R

ings

75METRIC O-RINGS

CrossSection

InsideDiameter Std.

1.50 36.501.50 37.00 GR1.50 37.501.50 38.00 GR1.50 38.50 1.50 39.00 GR1.50 39.501.50 40.00 GR1.50 41.00 GR1.50 42.00 GR1.50 43.00 GR1.50 44.00 GR1.50 45.00 GR1.50 46.00 GR1.50 47.00 GR1.50 47.701.50 48.00 GR1.50 49.00 GR1.50 50.00 GR1.50 51.00 GR1.50 51.501.50 52.00 GR1.50 53.00 GR1.50 54.00 GR1.50 55.00 GR1.50 56.00 GR1.50 57.00 GR1.50 58.001.50 59.00 GR1.50 60.00 GR1.50 61.00 GR1.50 62.00 GR1.50 63.00 GR1.50 64.00 GR1.50 65.00 GR1.50 65.501.50 66.00 GR1.50 67.00 GR1.50 67.501.50 68.00 GR1.50 69.00 GR1.50 70.00 GR1.50 71.00 GR1.50 71.501.50 72.00 GR

CrossSection

InsideDiameter Std.

1.50 73.00 GR1.50 74.00 GR1.50 75.00 GR1.50 76.00 GR1.50 77.00 GR1.50 78.00 GR1.50 79.001.50 79.501.50 80.00 GR1.50 81.00 GR1.50 82.00 GR1.50 83.00 GR1.50 84.00 GR1.50 85.00 GR1.50 86.00 GR1.50 87.00 GR1.50 88.00 GR1.50 89.00 GR1.50 90.00 GR1.50 91.00 GR1.50 92.00 GR1.50 93.00 GR1.50 94.00 GR1.50 95.00 GR1.50 96.00 GR1.50 97.00 GR1.50 98.00 GR1.50 99.00 GR1.50 100.00 GR1.50 104.001.50 105.001.50 110.001.50 112.001.50 125.001.50 130.001.50 136.001.50 140.001.50 150.001.50 205.001.52 1.42 2-0031.53 1.421.55 11.001.55 13.301.55 18.001.60 2.00

OR

M S

erie

s M

etric

O-R

ings

76 METRIC O-RINGS

CrossSection

InsideDiameter Std.

1.60 2.201.60 2.751.60 3.10 BS,SW,5-683

1.60 3.301.60 4.10 BS,SW1.60 4.701.60 5.001.60 5.10 BS,SW1.60 5.601.60 6.10 BS,SW1.60 6.501.60 7.10 BS,SW1.60 8.001.60 8.10 BS,SW1.60 9.10 BS,SW1.60 9.501.60 10.10 BS,SW1.60 11.10 BS,SW1.60 12.10 BS,SW1.60 12.501.60 12.541.60 13.10 BS,SW1.60 14.001.60 14.10 BS,SW1.60 15.10 BS,SW1.60 16.10 BS,SW1.60 17.001.60 17.10 BS,SW1.60 18.10 BS,SW1.60 19.10 BS,SW1.60 20.101.60 21.101.60 22.10 BS,SW1.60 22.401.60 25.10 BS,SW1.60 25.301.60 27.10 BS,SW1.60 29.10 BS,SW1.60 31.101.60 32.10 BS,SW1.60 35.10 BS,SW1.60 37.10 BS,SW1.60 39.201.60 47.001.60 59.00

CrossSection

InsideDiameter Std.

1.60 61.001.60 71.001.60 97.001.60 132.501.60 143.501.60 181.001.63 6.07 3-9021.63 7.65 3-9031.68 1.781.70 8.701.70 12.001.70 17.101.70 43.001.70 131.001.75 4.501.75 23.001.78 1.78 2-0041.78 2.57 2-0051.78 2.90 2-0061.78 3.171.78 3.68 2-0071.78 4.47 2-0081.78 4.761.78 5.28 2-0091.78 6.07 2-0101.78 6.351.78 6.751.78 7.001.78 7.471.78 7.65 2-0111.78 7.801.78 7.941.78 8.001.78 8.73 5-6121.78 9.25 2-0121.78 9.521.78 10.82 2-0131.78 11.101.78 11.11 5-6131.78 12.42 2-0141.78 13.231.78 13.461.78 14.00 2-0151.78 14.501.78 15.60 2-016

OR

M S

erie

s M

etric

O-R

ings

77METRIC O-RINGS

CrossSection

InsideDiameter Std.

1.78 16.001.78 17.17 2-0171.78 17.741.78 18.77 2-0181.78 19.801.78 20.35 2-0191.78 21.95 2-0201.78 23.001.78 23.101.78 23.52 2-0211.78 25.12 2-0221.78 25.401.78 26.70 2-0231.78 28.30 2-0241.78 29.101.78 29.87 2-0251.78 31.47 2-0261.78 32.001.78 33.05 2-0271.78 34.65 2-0281.78 36.271.78 37.82 2-0291.78 39.451.78 41.00 2-0301.78 42.501.78 44.17 2-0311.78 45.841.78 47.35 2-0321.78 50.52 2-0331.78 53.70 2-0341.78 56.87 2-0351.78 60.05 2-0361.78 63.22 2-0371.78 66.40 2-0381.78 69.57 2-0391.78 72.75 2-0401.78 75.92 2-0411.78 79.001.78 82.27 2-0421.78 85.341.78 88.62 2-0431.78 91.701.78 94.97 2-0441.78 98.051.78 100.00

CrossSection

InsideDiameter Std.

1.78 101.32 2-0451.78 104.401.78 107.67 2-0461.78 110.741.78 114.02 2-0471.78 117.101.78 120.37 2-0481.78 123.441.78 126.72 2-0491.78 129.401.78 131.571.78 133.07 2-0501.78 135.761.78 138.941.78 142.111.78 145.291.78 148.461.78 151.641.78 154.811.78 158.001.78 161.161.78 164.341.78 167.511.78 170.691.78 173.871.78 340.001.78 470.691.78 473.871.80 1.80 ISO-36011.80 2.00 ISO-36011.80 2.24 ISO-36011.80 2.50 ISO-36011.80 2.601.80 2.80 ISO-36011.80 3.15 ISO-36011.80 3.55 ISO-36011.80 3.75 ISO-36011.80 3.901.80 4.00 ISO-36011.80 4.50 ISO-36011.80 4.87 ISO-36011.80 5.00 ISO-36011.80 5.15 ISO-36011.80 5.30 ISO-36011.80 5.60 ISO-3601

OR

M S

erie

s M

etric

O-R

ings

78 METRIC O-RINGS

CrossSection

InsideDiameter Std.

1.80 6.00 ISO-36011.80 6.30 ISO-36011.80 6.70 ISO-36011.80 6.90 ISO-36011.80 7.10 ISO-36011.80 7.50 ISO-36011.80 7.801.80 8.00 ISO-36011.80 8.50 ISO-36011.80 8.76 ISO-36011.80 9.00 ISO-36011.80 9.50 ISO-36011.80 10.00 ISO-36011.80 10.60 ISO-36011.80 11.20 ISO-36011.80 11.80 ISO-36011.80 12.101.80 12.50 ISO-36011.80 13.20 ISO-36011.80 14.00 ISO-36011.80 14.501.80 15.00 ISO-36011.80 16.00 ISO-36011.80 17.00 ISO-36011.80 18.001.80 18.801.80 20.001.80 25.001.80 32.501.80 39.501.80 41.001.80 43.401.80 60.001.83 8.92 3-9041.83 10.52 3-9051.83 10.721.90 2.40 R0 1.90 2.60 R11.90 2.80 P3,

JASO-1003

1.90 3.40 R21.90 3.501.90 3.80 P4,

JASO-10041.90 4.20 R31.90 4.30

CrossSection

InsideDiameter Std.

1.90 4.80 P5, JASO-1005

1.90 4.90 R41.90 5.70 R51.90 5.80 P6,

JASO-10061.90 6.40 R5a1.90 6.80 P7,

JASO-10071.90 7.20 R61.90 7.80 P8,

JASO-10081.90 8.00 R6a1.90 8.80 P9,

JASO-10091.90 8.90 R71.90 9.101.90 9.80 P10,

JASO-10101.90 11 JASO-10111.90 12.201.90 12.3 JASO-10121.90 13 JASO-10131.90 13.401.90 13.8 JASO-10141.90 14.8 JASO-10151.90 15.001.90 15.501.90 15.8 JASO-10161.90 16.8 JASO-10171.90 17.8 JASO-10181.90 18.8 JASO-10191.90 19.8 JASO-10201.90 21 JASO-10211.90 22.1 JASO-10221.90 23.3 JASO-10231.90 24.7 JASO-10251.90 26.2 JASO-10261.90 27.7 JASO-10281.90 28.001.90 29.7 JASO-10301.90 31.2 JASO-10311.90 33.2 JASO-10331.90 35.2 JASO-10351.95 5.501.96 8.13

OR

M S

erie

s M

etric

O-R

ings

79METRIC O-RINGS

CrossSection

InsideDiameter Std.

1.98 11.881.98 11.89 3-9062.00 0.802.00 1.002.00 1.252.00 1.502.00 2.002.00 2.502.00 2.602.00 3.00 GR2.00 3.502.00 3.602.00 4.00 GR2.00 4.502.00 4.602.00 5.00 GR2.00 5.502.00 5.602.00 6.00 GR2.00 6.202.00 6.502.00 7.00 GR2.00 7.502.00 8.00 GR2.00 8.502.00 9.00 GR2.00 9.102.00 9.202.00 9.502.00 10.00 GR2.00 10.502.00 11.00 GR2.00 11.502.00 12.00 GR2.00 12.502.00 13.00 GR2.00 13.502.00 14.00 GR2.00 14.502.00 15.00 GR2.00 15.502.00 15.702.00 16.00 GR2.00 16.502.00 17.00 GR

CrossSection

InsideDiameter Std.

2.00 17.502.00 18.00 GR2.00 18.502.00 19.00 GR2.00 19.502.00 20.00 GR2.00 20.502.00 21.00 GR2.00 21.502.00 21.90 S22.42.00 22.00 GR2.00 22.502.00 23.00 GR2.00 23.50 S242.00 24.00 GR2.00 24.50 S252.00 25.00 GR2.00 25.50 S262.00 26.00 GR2.00 26.50 2.00 27.00 GR2.00 27.50 S282.00 28.00 GR2.00 28.50 S292.00 29.00 GR2.00 29.50 S302.00 30.00 GR2.00 30.50 2.00 31.00 GR,S31.52.00 31.50 S322.00 32.00 GR2.00 32.502.00 33.00 GR2.00 33.202.00 33.50 S342.00 34.00 GR2.00 34.50 S352.00 35.00 GR,S35.52.00 35.50 S362.00 36.00 GR2.00 36.502.00 37.00 GR2.00 37.50 S382.00 38.00 GR2.00 38.50 S39

OR

M S

erie

s M

etric

O-R

ings

80 METRIC O-RINGS

CrossSection

InsideDiameter Std.

2.00 39.00 GR2.00 39.50 S402.00 40.00 GR2.00 41.00 GR2.00 41.50 S422.00 42.00 GR2.00 43.00 GR2.00 43.50 S442.00 44.00 GR2.00 44.50 S452.00 45.00 GR2.00 45.50 S462.00 46.00 GR2.00 47.00 GR2.00 47.50 S482.00 48.00 GR2.00 48.502.00 49.00 GR2.00 49.50 S502.00 50.00 GR2.00 50.202.00 51.00 GR2.00 52.00 GR2.00 52.50 S532.00 53.00 GR2.00 54.00 GR2.00 54.50 S552.00 55.00 GR2.00 55.50 S562.00 56.00 GR2.00 57.00 GR2.00 58.00 GR2.00 59.00 GR2.00 59.50 S602.00 60.00 GR2.00 61.00 GR2.00 62.00 GR2.00 62.50 S632.00 63.00 GR2.00 64.00 GR2.00 64.50 S652.00 65.00 GR2.00 66.00 GR2.00 66.50 S672.00 67.00 GR

CrossSection

InsideDiameter Std.

2.00 68.00 GR2.00 69.00 GR2.00 69.50 S702.00 70.00 GR2.00 70.50 S712.00 71.00 GR2.00 71.202.00 72.00 GR2.00 73.00 GR2.00 74.00 GR2.00 74.50 S752.00 75.00 GR2.00 75.502.00 76.00 GR2.00 77.00 GR2.00 78.00 GR2.00 79.00 GR2.00 79.50 S802.00 80.00 GR2.00 81.00 GR2.00 82.00 GR2.00 83.00 GR2.00 84.00 GR2.00 84.50 S852.00 85.00 GR2.00 86.00 GR2.00 87.00 GR2.00 88.00 GR2.00 89.00 GR2.00 89.50 S902.00 90.00 GR2.00 91.00 GR2.00 92.00 GR2.00 93.00 GR2.00 94.00 GR2.00 94.50 S952.00 95.00 GR2.00 96.00 GR2.00 97.00 GR2.00 98.00 GR2.00 99.00 GR2.00 99.50 S1002.00 100.00 GR2.00 102.002.00 103.00

OR

M S

erie

s M

etric

O-R

ings

81METRIC O-RINGS

CrossSection

InsideDiameter Std.

2.00 104.002.00 104.50 S1052.00 105.002.00 106.002.00 107.002.00 109.002.00 109.50 S1102.00 110.002.00 111.002.00 111.50 S1122.00 112.002.00 113.002.00 114.002.00 114.50 S1152.00 115.002.00 116.002.00 118.002.00 119.50 S1202.00 120.002.00 122.002.00 123.002.00 124.50 S1252.00 125.002.00 126.002.00 127.002.00 128.002.00 129.002.00 129.50 S1302.00 130.002.00 131.50 S1322.00 132.002.00 134.50 S1352.00 135.002.00 136.002.00 139.002.00 139.50 S1402.00 140.002.00 143.002.00 144.50 S1452.00 148.002.00 149.50 S1502.00 150.002.00 155.002.00 156.002.00 158.00

CrossSection

InsideDiameter Std.

2.00 159.002.00 159.502.00 160.002.00 164.002.00 164.502.00 165.002.00 169.502.00 170.002.00 175.002.00 178.002.00 180.002.00 181.502.00 182.002.00 184.502.00 185.002.00 188.002.00 190.002.00 192.002.00 194.502.00 196.002.00 199.502.00 205.002.00 212.002.00 216.002.00 238.002.00 244.002.00 250.002.00 255.002.00 262.002.00 276.002.00 280.002.00 300.002.00 440.002.08 13.46 3-9072.10 11.802.10 19.402.10 61.002.20 1.802.20 6.002.20 9.302.20 10.002.20 11.002.20 11.302.20 12.002.20 13.30

OR

M S

erie

s M

etric

O-R

ings

82 METRIC O-RINGS

Cross Section

InsideDiameter Std.

2.20 15.302.20 17.002.20 18.002.20 19.302.20 35.002.20 89.502.20 110.002.21 9.002.21 16.36 3-9082.25 9.002.25 12.502.25 16.002.29 96.502.30 16.002.30 17.002.30 34.002.30 36.002.30 160.002.35 11.502.40 2.502.40 3.30 SW2.40 3.60 BS2.40 3.902.40 4.30 SW2.40 4.60 BS2.40 4.60 BS2.40 5.30 SW2.40 5.502.40 5.60 BS2.40 6.002.40 6.30 SW,5-6862.40 6.60 BS2.40 7.30 SW,5-6872.40 7.502.40 7.60 BS2.40 8.002.40 8.30 SW2.40 8.60 BS2.40 9.30 SW2.40 9.60 BS2.40 9.80 P1OA,

JASO-20102.40 10.002.40 10.30 SW2.40 10.502.40 10.60 BS

Cross Section

InsideDiameter Std.

2.40 10.80 P112.40 11.00 P11.2,

JASO-20112.40 11.30 SW2.40 11.502.40 11.60 BS2.40 11.80 P122.40 12.30 SW, P12.5,

JASO-20122.40 12.60 BS2.40 12.802.40 13 JASO-20132.40 13.30 SW2.40 13.502.40 13.60 BS2.40 13.80 P14,

JASO-20142.40 13.902.40 14.30 SW2.40 14.502.40 14.60 BS2.40 14.80 P15,

JASO-20152.40 15.202.40 15.30 SW2.40 15.502.40 15.60 BS2.40 15.80 P16,

JASO-20162.40 16.30 SW2.40 16.60 BS2.40 16.80 JASO-20172.40 17.30 SW2.40 17.50 2.40 17.60 BS2.40 17.80 P18,

JASO-20182.40 18.002.40 18.30 SW2.40 18.60 BS2.40 18.80 JASO-20192.40 19.002.40 19.30 SW2.40 19.60 BS2.40 19.80 P20,

JASO-20202.40 20.30 SW2.40 20.50

OR

M S

erie

s M

etric

O-R

ings

83METRIC O-RINGS

Cross Section

InsideDiameter Std.

2.40 20.80 P21, JASO-2021

2.40 21.30 SW2.40 21.502.40 21.60 BS2.40 21.80 P222.40 22.1 JASO-20222.40 22.30 SW,

JASO-20232.40 23.202.40 23.30 SW,

JASO-20232.40 23.502.40 24.502.40 24.60 BS2.40 24.7 JASO-20252.40 25.002.40 25.30 SW2.40 26.2 JASO-20262.40 26.402.40 26.902.40 27.30 SW2.40 27.502.40 27.60 BS2.40 27.70 JASO-20282.40 28.302.40 29.002.40 29.60 BS2.40 29.7 JASO-20302.40 30.30 SW2.40 31.2 JASO-20312.40 31.60 BS2.40 33.2 JASO-20332.40 33.30 SW2.40 34.60 BS2.40 35.002.40 35.2 JASO-20352.40 37.2 JASO-20372.40 37.60 BS2.40 39.60 BS2.40 39.7 JASO-20402.40 41.60 BS2.40 42.2 JASO-20422.40 44.60 BS2.40 44.7 JASO-20452.40 47.00

Cross Section

InsideDiameter Std.

2.40 47.2 JASO-20472.40 47.60 BS2.40 49.60 BS2.40 49.7 JASO-20502.40 50.202.40 51.60 BS2.40 52.6 JASO-20532.40 54.60 BS2.40 55.6 JASO-20562.40 57.60 BS2.40 59.60 BS,

JASO-20602.40 61.60 BS2.40 62.6 JASO-20632.40 64.60 BS2.40 66.6 JASO-20672.40 67.60 BS2.40 69.60 SW,P12.62.40 70.6 JASO-20712.40 76.002.40 76.302.40 213.002.46 17.93 3-9092.46 19.18 3-9102.50 2.502.50 4.00 GR2.50 4.602.50 5.00 GR2.50 5.502.50 6.00 GR2.50 6.502.50 7.00 GR2.50 7.502.50 8.00 GR2.50 8.502.50 9.00 GR2.50 9.502.50 10.00 GR2.50 10.502.50 11.00 GR2.50 11.502.50 12.00 GR2.50 12.502.50 13.00 GR2.50 13.502.50 14.00 GR

OR

M S

erie

s M

etric

O-R

ings

84 METRIC O-RINGS

Cross Section

InsideDiameter Std.

2.50 14.502.50 15.00 GR2.50 15.502.50 16.00 GR2.50 16.502.50 17.00 GR2.50 17.502.50 18.00 GR2.50 18.502.50 19.00 GR2.50 19.502.50 20.00 GR2.50 20.502.50 21.00 GR2.50 21.502.50 22.00 GR2.50 22.502.50 23.00 GR2.50 23.502.50 24.00 GR2.50 24.502.50 25.00 GR2.50 25.50 2.50 26.00 GR2.50 26.502.50 27.00 GR2.50 27.502.50 28.00 GR2.50 28.502.50 29.00 GR2.50 29.502.50 30.00 GR2.50 30.502.50 31.00 GR2.50 31.502.50 32.00 GR2.50 32.502.50 33.00 GR2.50 33.502.50 34.00 GR2.50 34.50 2.50 35.00 GR2.50 35.502.50 36.00 GR2.50 36.50

Cross Section

InsideDiameter Std.

2.50 37.00 GR2.50 37.502.50 38.00 GR2.50 38.50 2.50 39.00 GR2.50 39.502.50 40.00 GR2.50 41.00 GR2.50 42.00 GR2.50 43.00 GR2.50 44.00 GR2.50 45.00 GR2.50 46.00 GR2.50 46.502.50 47.00 GR2.50 48.00 GR2.50 49.00 GR2.50 50.00 GR2.50 51.00 GR2.50 52.00 GR2.50 53.00 GR2.50 54.00 GR2.50 55.00 GR2.50 56.00 GR2.50 57.00 GR2.50 58.00 GR2.50 59.00 GR2.50 60.00 GR2.50 61.00 GR2.50 62.00 GR2.50 63.00 GR2.50 64.00 GR2.50 65.00 GR2.50 66.00 GR2.50 67.00 GR2.50 68.00 GR2.50 69.00 GR2.50 70.00 GR2.50 71.00 GR2.50 72.00 GR2.50 73.00 GR2.50 74.00 GR2.50 75.00 GR2.50 76.00 GR2.50 76.50

OR

M S

erie

s M

etric

O-R

ings

85METRIC O-RINGS

Cross Section

InsideDiameter Std.

2.50 77.00 GR2.50 78.00 GR2.50 79.00 GR2.50 80.00 GR2.50 81.00 GR2.50 82.00 GR2.50 83.00 GR2.50 84.00 GR2.50 85.00 GR2.50 86.00 GR2.50 87.00 GR2.50 88.00 GR2.50 89.00 GR2.50 90.00 GR2.50 91.00 GR2.50 92.00 GR2.50 93.00 GR2.50 94.00 GR2.50 95.00 GR2.50 96.00 GR2.50 97.00 GR2.50 98.00 GR2.50 99.00 GR2.50 100.00 GR2.50 101.00 GR2.50 102.00 GR2.50 103.00 GR2.50 104.00 GR2.50 105.00 GR2.50 106.00 GR2.50 107.00 GR2.50 108.00 GR2.50 109.00 GR2.50 110.00 GR2.50 111.00 GR2.50 112.00 GR2.50 113.00 GR2.50 114.00 GR2.50 115.00 GR2.50 116.00 GR2.50 117.00 GR2.50 118.00 GR2.50 119.00 GR2.50 120.00 GR2.50 121.00 GR

Cross Section

InsideDiameter Std.

2.50 122.00 GR2.50 123.00 GR2.50 124.00 GR2.50 125.00 GR2.50 126.00 GR2.50 127.00 GR2.50 128.00 GR2.50 129.00 GR2.50 130.00 GR2.50 131.00 GR2.50 132.00 GR2.50 133.00 GR2.50 134.00 GR2.50 135.00 GR2.50 136.00 GR2.50 137.00 GR2.50 138.00 GR2.50 139.00 GR2.50 140.00 GR2.50 141.00 GR2.50 142.00 GR2.50 143.00 GR2.50 144.002.50 145.00 GR2.50 146.00 GR2.50 147.00 GR2.50 148.00 GR2.50 149.00 GR2.50 150.00 GR2.50 152.002.50 155.002.50 160.002.50 162.002.50 163.002.50 164.002.50 167.002.50 169.502.50 170.002.50 174.002.50 175.002.50 190.002.50 195.002.50 197.002.50 215.002.50 230.00

OR

M S

erie

s M

etric

O-R

ings

86 METRIC O-RINGS

CrossSection

InsideDiameter Std.

2.50 260.002.50 265.002.50 267.002.50 270.002.50 272.002.50 280.002.50 289.002.50 315.002.50 350.002.50 420.002.55 29.102.60 10.002.60 14.302.60 17.002.60 17.102.60 17.862.60 18.702.60 20.602.60 37.002.60 235.002.62 1.24 2-1022.62 2.06 2-1032.62 2.84 2-1042.62 3.63 2-1052.62 4.42 2-1062.62 5.23 2-1072.62 6.02 2-1082.62 7.59 2-1092.62 7.752.62 8.752.62 9.132.62 9.19 2-1102.62 9.802.62 9.902.62 10.77 2-1112.62 11.91 5-6152.62 12.37 2-1122.62 12.702.62 13.10 5-6162.62 13.94 2-1132.62 14.012.62 15.082.62 15.54 2-1142.62 15.712.62 15.88 5-617

CrossSection

InsideDiameter Std.

2.62 17.12 2-1152.62 17.462.62 17.862.62 18.72 2-1162.62 20.242.62 20.30 2-1172.62 20.362.62 20.642.62 21.89 2-1182.62 22.002.62 22.232.62 23.47 2-1192.62 23.812.62 25.07 2-1202.62 26.64 2-1212.62 28.24 2-1222.62 29.82 2-1232.62 31.42 2-1242.62 32.99 2-1252.62 34.59 2-1262.62 35.502.62 36.17 2-1272.62 37.77 2-1282.62 39.34 2-1292.62 40.042.62 40.94 2-1302.62 42.52 2-1312.62 44.12 2-1322.62 45.69 2-1332.62 47.29 2-1342.62 48.90 2-1352.62 49.402.62 50.002.62 50.47 2-1362.62 52.07 2-1372.62 53.64 2-1382.62 55.25 2-1392.62 56.82 2-1402.62 58.42 2-1412.62 59.99 2-1422.62 61.60 2-1432.62 63.17 2-1442.62 64.77 2-1452.62 66.34 2-1462.62 67.95 2-147

OR

M S

erie

s M

etric

O-R

ings

87METRIC O-RINGS

CrossSection

InsideDiameter Std.

2.62 69.52 2-1482.62 71.12 2-1492.62 72.69 2-1502.62 74.302.62 75.87 2-1512.62 77.502.62 79.052.62 79.932.62 80.602.62 82.22 2-1522.62 83.802.62 88.57 2-1532.62 94.92 2-1542.62 96.502.62 101.27 2-1552.62 107.62 2-1562.62 113.97 2-1572.62 120.32 2-1582.62 126.67 2-1592.62 133.02 2-1602.62 139.37 2-1612.62 145.72 2-1622.62 152.07 2-1632.62 158.42 2-1642.62 164.77 2-1652.62 171.12 2-1662.62 177.47 2-1672.62 183.82 2-1682.62 190.17 2-1692.62 196.52 2-1702.62 202.87 2-1712.62 209.22 2-1722.62 215.57 2-1732.62 221.92 2-1742.62 227.062.62 227.402.62 228.27 2-1752.62 234.62 2-1762.62 240.97 2-1772.62 247.32 2-1782.62 254.002.62 281.302.62 348.812.65 9.502.65 14.00 ISO3601

CrossSection

InsideDiameter Std.

2.65 15.00 ISO36012.65 16.00 ISO36012.65 17.00 ISO36012.65 18.00 ISO36012.65 19.00 ISO36012.65 20.00 ISO36012.65 21.20 ISO36012.65 22.40 ISO36012.65 23.60 ISO36012.65 25.00 ISO36012.65 25.80 ISO36012.65 26.50 ISO36012.65 28.00 ISO36012.65 29.352.65 30.00 ISO36012.65 31.50 ISO36012.65 32.50 ISO36012.65 33.50 ISO36012.65 34.50 ISO36012.65 35.50 ISO36012.65 36.50 ISO36012.65 37.50 ISO36012.65 38.70 ISO36012.67 27.002.70 3.002.70 8.90 R8,5-5872.70 10.50 R9,5-5882.70 12.10 R102.70 13.60 R11,5-5902.70 15.10 R12,5-5912.70 16.90 R13,5-5922.70 18.40 R14,5-5932.70 27.302.70 42.002.70 43.002.75 1.002.75 30.002.80 10.002.80 11.602.80 23.702.80 59.402.80 67.002.89 63.462.90 56.602.90 90.00

OR

M S

erie

s M

etric

O-R

ings

88 METRIC O-RINGS

CrossSection

InsideDiameter Std.

2.95 21.92 3-9112.95 23.47 3-9122.95 25.04 3-9132.95 26.59 3-9142.95 29.74 3-9162.95 34.42 3-9183.00 3.00 GR3.00 3.503.00 4.00 GR3.00 4.503.00 5.00 GR3.00 5.303.00 5.503.00 6.00 GR3.00 6.503.00 7.00 GR3.00 7.503.00 8.00 GR3.00 8.503.00 8.603.00 9.00 GR,5-7003.00 9.503.00 10.00 GR3.00 10.503.00 11.00 GR3.00 11.503.00 12.00 GR3.00 12.503.00 13.00 GR3.00 13.503.00 14.00 GR3.00 14.503.00 15.00 GR3.00 15.303.00 15.503.00 16.00 GR3.00 16.503.00 17.00 GR3.00 17.20 SW3.00 17.503.00 18.00 GR3.00 18.20 SW3.00 18.503.00 19.00 GR3.00 19.20 SW

CrossSection

InsideDiameter Std.

3.00 19.50 BS3.00 20.00 GR3.00 20.20 SW3.00 20.503.00 21.00 GR3.00 21.20 SW3.00 21.50 BS3.00 22.00 GR3.00 22.20 SW3.00 22.50 BS3.00 23.00 GR3.00 23.503.00 23.603.00 24.00 GR3.00 24.103.00 24.20 SW3.00 24.50 BS3.00 24.603.00 25.00 GR3.00 25.20 SW3.00 25.50 BS3.00 25.603.00 26.00 GR3.00 26.20 SW3.00 26.50 BS3.00 27.00 GR3.00 27.50 BS3.00 28.00 GR3.00 28.20 SW3.00 28.503.00 29.00 GR3.00 29.20 SW3.00 29.50 BS3.00 29.603.00 30.00 GR3.00 30.20 SW3.00 30.503.00 31.00 GR3.00 31.20 SW3.00 31.50 BS3.00 32.00 GR3.00 32.20 SW3.00 32.50 BS3.00 32.703.00 33.00 GR

OR

M S

erie

s M

etric

O-R

ings

89METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.00 33.503.00 34.00 GR3.00 34.20 SW3.00 34.50 BS3.00 35.00 GR3.00 35.20 SW 3.00 35.50 BS3.00 36.00 GR3.00 36.20 SW3.00 36.50 BS3.00 36.803.00 37.00 GR3.00 37.20 SW3.00 37.47 3-9203.00 37.50 BS3.00 38.00 GR3.00 38.503.00 39.00 GR3.00 39.20 SW3.00 39.50 BS3.00 40.00 GR3.00 40.20 SW3.00 41.00 GR3.00 41.50 BS3.00 42.00 GR3.00 42.20 SW3.00 42.50 BS3.00 43.00 GR3.00 43.69 3-9243.00 44.00 GR3.00 44.20 SW3.00 44.50 BS3.00 45.00 GR3.00 45.20 SW3.00 46.00 GR3.00 46.20 SW3.00 46.503.00 47.00 GR3.00 48.00 GR3.00 49.00 GR3.00 49.203.00 49.50 SW,BS3.00 50.00 GR3.00 50.20 SW3.00 50.50

CrossSection

InsideDiameter Std.

3.00 51.00 GR3.00 52.00 GR3.00 53.00 GR3.00 53.09 3-9283.00 53.503.00 54.00 GR3.00 54.203.00 54.50 SW,BS3.00 55.00 GR3.00 55.20 SW3.00 56.00 GR3.00 56.20 SW3.00 57.00 GR3.00 57.20 SW3.00 58.00 GR3.00 58.603.00 59.00 GR3.00 59.36 3-9323.00 59.50 SW,BS3.00 60.00 GR3.00 60.50 SW3.00 61.00 GR3.00 62.00 GR3.00 62.20 SW3.00 63.00 GR3.00 64.00 GR3.00 64.50 SW,BS3.00 65.00 GR3.00 66.00 GR3.00 67.00 GR3.00 68.00 GR3.00 69.00 GR3.00 69.50 SW,BS3.00 70.00 GR3.00 71.00 GR3.00 71.203.00 72.00 GR3.00 73.00 GR3.00 74.00 GR3.00 74.50 SW,BS3.00 75.00 GR3.00 76.00 GR3.00 77.00 GR3.00 78.00 GR3.00 79.00 GR

OR

M S

erie

s M

etric

O-R

ings

90 METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.00 79.50 SW,BS3.00 80.00 GR3.00 81.00 GR3.00 82.00 GR3.00 82.503.00 83.00 GR3.00 84.00 GR3.00 84.50 SW,BS3.00 85.00 GR3.00 86.00 GR3.00 87.00 GR3.00 88.00 GR3.00 89.00 GR3.00 89.50 SW,BS3.00 90.00 GR3.00 91.00 GR3.00 92.00 GR3.00 93.00 GR3.00 94.00 GR3.00 94.50 SW,BS3.00 95.00 GR3.00 96.00 GR3.00 97.00 GR3.00 98.00 GR3.00 99.00 GR3.00 99.50 SW,BS3.00 100.00 GR3.00 101.00 GR3.00 102.00 GR3.00 103.00 GR3.00 104.00 GR3.00 104.50 SW,BS3.00 105.00 GR3.00 106.00 GR3.00 107.00 GR3.00 108.00 GR3.00 109.00 GR3.00 109.50 SW,BS3.00 110.00 GR3.00 111.00 GR3.00 112.00 GR3.00 112.503.00 113.00 GR3.00 114.00 GR3.00 114.50 SW,BS

CrossSection

InsideDiameter Std.

3.00 115.00 GR3.00 116.00 GR3.00 117.00 GR3.00 118.00 GR3.00 119.00 GR3.00 119.50 SW,BS3.00 120.00 GR3.00 120.503.00 121.00 GR3.00 122.00 GR3.00 123.00 GR3.00 124.00 GR3.00 124.50 SW,BS3.00 125.00 GR3.00 126.00 GR3.00 127.00 GR3.00 128.00 GR3.00 129.00 GR3.00 129.50 SW,BS3.00 130.00 GR3.00 131.00 GR3.00 132.00 GR3.00 133.00 GR3.00 134.00 GR3.00 134.50 SW,BS3.00 135.00 GR3.00 136.00 GR3.00 137.00 GR3.00 138.00 GR3.00 139.00 GR3.00 139.50 SW,BS3.00 140.00 GR3.00 141.00 GR3.00 142.00 GR3.00 143.00 GR3.00 143.503.00 144.00 GR3.00 144.50 SW,BS3.00 145.00 GR3.00 145.503.00 146.00 GR3.00 147.00 GR3.00 148.00 GR3.00 149.00 GR3.00 149.50 BS

OR

M S

erie

s M

etric

O-R

ings

91METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.00 150.00 GR3.00 151.00 GR3.00 152.00 GR3.00 153.00 GR3.00 154.00 GR3.00 154.50 BS3.00 155.00 GR3.00 156.00 GR3.00 157.00 GR3.00 158.00 GR3.00 159.00 GR3.00 159.50 BS3.00 160.00 GR3.00 161.00 GR3.00 162.00 GR3.00 163.00 GR3.00 164.00 GR3.00 164.50 BS3.00 165.00 GR3.00 166.00 GR3.00 167.00 GR3.00 168.00 GR3.00 169.00 GR3.00 169.50 BS3.00 170.00 GR3.00 171.00 GR3.00 172.00 GR3.00 173.00 GR3.00 174.00 GR3.00 174.50 BS3.00 175.00 GR3.00 176.00 GR3.00 177.00 GR3.00 178.00 GR3.00 179.00 GR3.00 179.50 BS3.00 180.00 GR3.00 181.00 GR3.00 182.00 GR3.00 183.00 GR3.00 183.503.00 184.00 GR3.00 184.50 BS3.00 185.00 GR3.00 186.00 GR

CrossSection

InsideDiameter Std.

3.00 187.00 GR3.00 188.00 GR3.00 189.00 GR3.00 189.50 BS3.00 190.00 GR3.00 191.00 GR3.00 192.00 GR3.00 193.00 GR3.00 194.00 GR3.00 194.50 BS3.00 195.00 GR3.00 196.00 GR3.00 197.00 GR3.00 198.00 GR3.00 199.00 GR3.00 199.50 BS3.00 200.00 GR3.00 201.00 GR3.00 202.00 GR3.00 203.00 GR3.00 204.00 GR3.00 204.50 BS3.00 205.00 GR3.00 206.00 GR3.00 207.00 GR3.00 208.00 GR3.00 209.00 GR3.00 209.50 BS3.00 210.00 GR3.00 211.00 GR3.00 212.00 GR3.00 213.00 GR3.00 214.00 GR3.00 215.00 GR3.00 216.00 GR3.00 217.00 GR3.00 218.00 GR3.00 219.00 GR3.00 219.50 BS3.00 220.00 GR3.00 221.00 GR3.00 222.00 GR3.00 223.00 GR3.00 224.00 GR3.00 225.00 GR

OR

M S

erie

s M

etric

O-R

ings

92 METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.00 226.00 GR3.00 227.00 GR3.00 228.00 GR3.00 229.00 GR3.00 229.50 BS3.00 230.00 GR3.00 231.00 GR3.00 232.00 GR3.00 233.00 GR3.00 234.00 GR3.00 235.00 GR3.00 236.00 GR3.00 237.00 GR3.00 238.00 GR3.00 239.00 GR3.00 239.50 BS3.00 240.00 GR3.00 241.00 GR3.00 242.00 GR3.00 243.00 GR3.00 244.00 GR3.00 245.00 GR3.00 246.00 GR3.00 247.00 GR3.00 248.00 GR3.00 249.00 GR3.00 249.50 BS3.00 250.00 GR3.00 254.003.00 259.003.00 259.303.00 260.003.00 264.003.00 265.003.00 270.003.00 274.003.00 278.003.00 280.003.00 282.003.00 285.003.00 290.003.00 300.003.00 305.003.00 310.003.00 315.00

CrossSection

InsideDiameter Std.

3.00 320.003.00 330.003.00 345.003.00 346.003.00 350.003.00 355.003.00 360.003.00 369.003.00 370.003.00 410.003.00 440.003.00 450.003.00 455.003.00 625.003.00 716.003.00 732.003.10 19.403.10 24.40 G253.10 28.403.10 29.40 G303.10 34.40 G353.10 39.40 G403.10 44.40 G453.10 47.633.10 49.40 G503.10 54.40 G553.10 57.403.10 59.40 G603.10 62.403.10 64.40 G653.10 69.40 G703.10 74.40 G753.10 79.40 G803.10 84.40 G853.10 89.40 G903.10 94.40 G953.10 99.40 G1003.10 104.40 G1053.10 109.40 G1103.10 114.40 G1153.10 115.003.10 119.40 G1203.10 124.40 G1253.10 129.40 G1303.10 134.40 G135

OR

M S

erie

s M

etric

O-R

ings

93METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.10 139.40 G1403.10 144.40 G1453.10 228.603.10 304.803.15 20.003.15 50.003.15 80.003.17 31.753.18 25.403.20 12.003.20 12.703.20 15.003.20 35.003.20 39.003.20 172.003.25 18.003.25 34.003.40 15.603.50 6.003.50 8.00 GR3.50 9.00 GR3.50 9.203.50 9.503.50 10.00 GR3.50 10.503.50 11.00 GR3.50 12.00 GR3.50 12.503.50 13.00 GR3.50 13.503.50 14.00 GR3.50 15.00 GR3.50 16.00 GR3.50 17.00 GR3.50 18.00 GR3.50 19.00 GR3.50 19.703.50 20.00 GR3.50 21.00 GR3.50 21.70 P22A3.50 22.00 GR3.50 22.10 P22.4,

JASO-30223.50 23.00 GR3.50 23.70 P24,

JASO-3024

CrossSection

InsideDiameter Std.

3.50 24.00 GR3.50 24.70 P25,

JASO-30253.50 25.00 GR3.50 25.20 P25.53.50 25.70 P26,

JASO-30263.50 26.00 GR3.50 27.00 GR3.50 27.70 P28,

JASO-30283.50 28.00 GR3.50 28.70 P293.50 29.00 GR3.50 29.20 P29.53.50 29.70 P30,

JASO-30303.50 30.00 GR3.50 30.70 P313.50 31.00 GR3.50 31.20 P31.5,

JASO-30313.50 31.70 P323.50 32.00 GR3.50 33.00 GR3.50 33.70 P34,

JASO-30343.50 34.00 GR3.50 34.70 P353.50 35.00 GR3.50 35.20 P35.5,

JASO-30353.50 35.70 P363.50 36.00 GR3.50 37.00 GR3.50 37.303.50 37.70 P38,

JASO-30383.50 38.00 GR3.50 38.253.50 38.70 P39,

JASO-30393.50 39.00 GR3.50 39.70 P40,

JASO-30403.50 40.00 GR3.50 40.70 P413.50 41.00 GR

OR

M S

erie

s M

etric

O-R

ings

94 METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.50 41.70 P42,JASO-3042

3.50 42.00 GR3.50 43.00 GR3.50 43.70 P44,

JASO-30443.50 44.00 GR3.50 44.70 P45,

JASO-30453.50 45.00 GR3.50 45.70 P463.50 46.00 GR3.50 47.00 GR3.50 47.70 P48,

JASO-30483.50 48.00 GR3.50 48.70 P493.50 49.00 GR3.50 49.70 P50,

JASO-30503.50 50.00 GR3.50 50.403.50 51.00 GR3.50 52.00 GR3.50 52.6 JASO-30533.50 53.00 GR3.50 54.00 GR3.50 55.00 GR3.50 55.563.50 55.6 JASO-30563.50 56.00 GR3.50 57.00 GR3.50 58.00 GR3.50 59.00 GR3.50 59.6 JASO-30603.50 60.00 GR3.50 61.00 GR3.50 62.00 GR3.50 62.6 JASO-30633.50 63.00 GR3.50 64.00 GR3.50 65.00 GR3.50 66.00 GR3.50 66.6 JASO-30673.50 67.00 GR3.50 68.00 GR3.50 69.00 GR

CrossSection

InsideDiameter Std.

3.50 70.00 GR3.50 70.6 JASO-30713.50 71.00 GR3.50 72.00 GR3.50 73.00 GR3.50 74.00 GR3.50 74.6 JASO-30753.50 75.00 GR3.50 76.00 GR3.50 77.00 GR3.50 78.00 GR3.50 79.00 GR3.50 79.6 JASO-30803.50 80.00 GR3.50 81.00 GR3.50 82.00 GR3.50 83.00 GR3.50 84.00 GR3.50 84.6 JASO-30853.50 85.00 GR3.50 86.00 GR3.50 87.00 GR3.50 88.00 GR3.50 89.00 GR3.50 89.6 JASO-30903.50 90.00 GR3.50 91.00 GR3.50 92.00 GR3.50 93.00 GR3.50 94.00 GR3.50 94.6 JASO-30953.50 95.00 GR3.50 96.00 GR3.50 99.6 JASO-31003.50 97.00 GR3.50 98.00 GR3.50 99.00 GR3.50 100.00 GR3.50 101.00 GR3.50 102.00 GR3.50 103.00 GR3.50 104.00 GR3.50 105.00 GR3.50 105.6 JASO-31063.50 106.00 GR

OR

M S

erie

s M

etric

O-R

ings

95METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.50 107.00 GR3.50 108.00 GR3.50 109.00 GR3.50 110.00 GR3.50 111.00 GR3.50 111.6 JASO-31123.50 112.00 GR3.50 113.00 GR3.50 114.00 GR3.50 115.00 GR3.50 116.00 GR3.50 117.00 GR3.50 117.6 JASO-31183.50 118.00 GR3.50 119.00 GR3.50 120.00 GR3.50 121.00 GR3.50 122.00 GR3.50 123.00 GR3.50 123.503.50 124.00 GR3.50 124.6 JASO-31253.50 125.00 GR3.50 126.00 GR3.50 127.00 GR3.50 128.00 GR3.50 128.503.50 129.00 GR3.50 130.00 GR3.50 131.00 GR3.50 131.6 JASO-31323.50 132.00 GR3.50 133.00 GR3.50 134.00 GR3.50 135.00 GR3.50 136.00 GR3.50 137.00 GR3.50 138.00 GR3.50 139.00 GR3.50 139.6 JASO-31403.50 140.00 GR3.50 141.00 GR3.50 142.00 GR3.50 143.00 GR3.50 144.00 GR

CrossSection

InsideDiameter Std.

3.50 145.00 GR3.50 146.00 GR3.50 147.00 GR3.50 148.00 GR3.50 149.00 GR3.50 149.6 JASO-31503.50 150.00 GR3.50 151.00 GR3.50 152.00 GR3.50 153.00 GR3.50 154.00 GR3.50 155.00 GR3.50 156.00 GR3.50 157.00 GR3.50 158.00 GR3.50 159.00 GR3.50 160.00 GR3.50 161.00 GR3.50 162.00 GR3.50 163.00 GR3.50 164.00 GR3.50 165.00 GR3.50 166.003.50 167.00 GR3.50 168.00 GR3.50 169.00 GR3.50 170.00 GR3.50 171.00 GR3.50 172.00 GR3.50 173.00 GR3.50 174.00 GR3.50 175.00 GR3.50 176.00 GR3.50 177.00 GR3.50 178.00 GR3.50 179.00 GR3.50 180.00 GR3.50 181.00 GR3.50 182.00 GR3.50 183.00 GR3.50 184.00 GR3.50 185.00 GR3.50 186.00 GR3.50 187.00 GR3.50 188.00 GR

OR

M S

erie

s M

etric

O-R

ings

96 METRIC O-RINGS

CrossSection

InsideDiameter Std.


CrossSection

InsideDiameter Std.


OR

M S

erie

s M

etric

O-R

ings

97METRIC O-RINGS

CrossSection

InsideDiameter Std.


CrossSection

InsideDiameter Std.

3.50 323.003.50 324.00 GR3.50 325.00 GR3.50 326.00 GR3.50 327.00 GR3.50 328.00 GR3.50 329.00 GR3.50 330.00 GR3.50 331.00 GR3.50 332.00 GR3.50 333.00 GR3.50 334.00 GR3.50 335.00 GR3.50 336.00 GR3.50 337.00 GR3.50 338.00 GR3.50 339.00 GR3.50 340.00 GR3.50 341.00 GR3.50 342.00 GR3.50 343.00 GR3.50 344.00 GR3.50 345.00 GR3.50 346.00 GR3.50 347.00 GR3.50 348.00 GR3.50 349.00 GR3.50 350.00 GR3.50 351.00 GR3.50 352.00 GR3.50 353.00 GR3.50 354.00 GR3.50 355.00 GR3.50 355.00 GR3.50 356.00 GR3.50 357.00 GR3.50 358.00 GR3.50 359.00 GR3.50 360.00 GR3.50 361.00 GR3.50 362.00 GR3.50 363.00 GR3.50 364.00 GR3.50 365.00 GR3.50 366.00 GR

OR

M S

erie

s M

etric

O-R

ings

98 METRIC O-RINGS

CrossSection

InsideDiameter Std.


CrossSection

InsideDiameter Std.

3.50 412.00 GR3.50 413.00 GR3.50 414.00 GR3.50 415.00 GR3.50 416.00 GR3.50 417.00 GR3.50 418.00 GR3.50 419.00 GR3.50 420.00 GR3.50 421.00 GR3.50 422.00 GR3.50 423.00 GR3.50 424.00 GR3.50 425.00 GR3.50 426.00 GR3.50 427.00 GR3.50 428.00 GR3.50 429.00 GR3.50 430.00 GR3.50 431.00 GR3.50 432.00 GR3.50 433.00 GR3.50 434.00 GR3.50 435.00 GR3.50 436.00 GR3.50 437.00 GR3.50 438.00 GR3.50 439.00 GR3.50 440.00 GR3.53 4.34 2-2013.53 5.94 2-2023.53 7.52 2-2033.53 9.12 2-2043.53 10.69 2-2053.53 12.29 2-2063.53 13.87 2-2073.53 15.47 2-2083.53 17.04 2-2093.53 18.64 2-2103.53 20.22 2-2113.53 21.82 2-2123.53 23.39 2-2133.53 24.99 2-2143.53 25.083.53 25.80

OR

M S

erie

s M

etric

O-R

ings

99METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.53 26.57 2-2153.53 28.17 2-2163.53 29.74 2-2173.53 31.34 2-2183.53 32.92 2-2193.53 33.123.53 34.52 2-2203.53 36.09 2-2213.53 37.303.53 37.69 2-2223.53 39.703.53 40.87 2-2233.53 41.283.53 42.86 5-3323.53 44.04 2-2243.53 44.453.53 46.043.53 47.22 2-2253.53 47.623.53 49.20 5-7013.53 50.39 2-2263.53 50.803.53 52.403.53 53.193.53 53.57 2-2273.53 53.973.53 53.983.53 55.563.53 56.74 2-2283.53 57.153.53 58.743.53 59.92 2-2293.53 60.323.53 61.903.53 63.09 2-2303.53 63.503.53 65.10 5-7033.53 66.27 2-2313.53 66.673.53 68.263.53 69.44 2-2323.53 69.853.53 71.44 5-7043.53 72.62 2-2333.53 73.02

CrossSection

InsideDiameter Std.

3.53 74.60 5-7053.53 75.79 2-2343.53 78.97 2-2353.53 82.14 2-2363.53 85.32 2-2373.53 88.49 2-2383.53 91.67 2-2393.53 94.84 2-2403.53 98.02 2-2413.53 101.19 2-2423.53 104.37 2-2433.53 107.54 2-2443.53 110.703.53 110.72 2-2453.53 113.89 2-2463.53 117.07 2-2473.53 120.24 2-2483.53 123.42 2-2493.53 126.59 2-2503.53 129.77 2-2513.53 132.94 2-2523.53 136.12 2-2533.53 139.29 2-2543.53 142.47 2-2553.53 145.64 2-2563.53 148.82 2-2573.53 151.99 2-2583.53 158.34 2-2593.53 164.69 2-2603.53 171.04 2-2613.53 177.39 2-2623.53 183.74 2-2633.53 190.09 2-2643.53 196.44 2-2653.53 200.003.53 202.79 2-2663.53 209.14 2-2673.53 215.49 2-2683.53 221.84 2-2693.53 228.19 2-2703.53 234.54 2-2713.53 240.89 2-2723.53 247.24 2-2733.53 253.59 2-2743.53 266.29 2-275

OR

M S

erie

s M

etric

O-R

ings

100 METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.53 278.99 2-2763.53 291.69 2-2773.53 304.39 2-2783.53 324.003.53 329.79 2-2793.53 343.503.53 355.19 2-2803.53 380.59 2-2813.53 405.26 2-2823.53 430.66 2-2833.53 456.06 2-2843.53 500.003.53 522.203.53 612.403.53 904.303.55 18.00 ISO-36013.55 19.00 ISO-36013.55 20.00 ISO-36013.55 21.20 ISO-36013.55 22.40 ISO-36013.55 23.60 ISO-36013.55 25.00 ISO-36013.55 25.80 ISO-36013.55 26.50 ISO-36013.55 28.00 ISO-36013.55 30.00 ISO-36013.55 31.50 ISO-36013.55 32.50 ISO-36013.55 33.50 ISO-36013.55 33.553.55 34.50 ISO-36013.55 35.50 ISO-36013.55 36.50 ISO-36013.55 37.50 ISO-36013.55 38.70 ISO-36013.55 40.00 ISO-36013.55 41.20 ISO-36013.55 42.50 ISO-36013.55 43.70 ISO-36013.55 45.00 ISO-36013.55 46.20 ISO-36013.55 47.50 ISO-36013.55 48.70 ISO-36013.55 50.00 ISO-36013.55 51.50 ISO-3601

CrossSection

InsideDiameter Std.

3.55 53.00 ISO-36013.55 54.50 ISO-36013.55 56.00 ISO-36013.55 58.00 ISO-36013.55 60.00 ISO-36013.55 61.50 ISO-36013.55 63.00 ISO-36013.55 65.00 ISO-36013.55 67.00 ISO-36013.55 69.00 ISO-36013.55 71.00 ISO-36013.55 73.00 ISO-36013.55 75.00 ISO-36013.55 77.50 ISO-36013.55 80.00 ISO-36013.55 82.50 ISO-36013.55 85.00 ISO-36013.55 87.50 ISO-36013.55 90.00 ISO-36013.55 92.50 ISO-36013.55 95.00 ISO-36013.55 97.50 ISO-36013.55 100.00 ISO-36013.55 103.00 ISO-36013.55 106.00 ISO-36013.55 109.00 ISO-36013.55 112.00 ISO-36013.55 115.00 ISO-36013.55 118.00 ISO-36013.55 122.00 ISO-36013.55 125.00 ISO-36013.55 128.00 ISO-36013.55 132.00 ISO-36013.55 136.00 ISO-36013.55 140.00 ISO-36013.55 145.00 ISO-36013.55 150.00 ISO-36013.55 155.00 ISO-36013.55 160.00 ISO-36013.55 165.00 ISO-36013.55 170.00 ISO-36013.55 175.00 ISO-36013.55 180.00 ISO-36013.55 185.00 ISO-36013.55 190.00 ISO-3601

OR

M S

erie

s M

etric

O-R

ings

101METRIC O-RINGS

CrossSection

InsideDiameter Std.

3.55 195.00 ISO-36013.55 200.00 ISO-36013.60 18.30 R15,5-5943.60 19.80 R16,5-5953.60 21.30 R17,5-5963.60 23.00 R18,5-5973.60 24.60 R19,5-5983.60 26.20 R20,5-5993.60 27.80 R21,5-6003.60 29.30 R22,5-6013.60 30.353.60 30.80 R23,5-6023.60 32.50 R24,5-6033.60 34.10 R25,5-6043.60 35.60 R26,5-6053.60 37.30 R27,5-6063.60 43.403.80 30.004.00 4.00 GR4.00 5.00 GR4.00 6.00 GR4.00 7.00 GR4.00 7.604.00 8.00 GR4.00 9.00 GR4.00 10.00 GR4.00 11.00 GR4.00 12.00 GR4.00 13.00 GR4.00 14.00 GR4.00 14.50 V154.00 15.00 GR4.00 16.00 GR4.00 17.00 GR4.00 18.00 GR4.00 19.00 GR4.00 20.00 GR4.00 21.00 GR4.00 22.00 GR4.00 23.00 GR4.00 23.50 V244.00 24.00 GR4.00 25.00 GR4.00 26.00 GR4.00 27.00 GR

CrossSection

InsideDiameter Std.

4.00 28.00 GR4.00 29.00 GR4.00 30.00 GR4.00 31.00 GR4.00 32.00 GR4.00 33.00 GR4.00 33.50 V344.00 34.00 GR4.00 35.00 GR4.00 36.00 GR4.00 37.00 GR4.00 38.00 GR4.00 39.00 GR4.00 39.50 V404.00 40.00 GR4.00 41.00 GR4.00 42.00 GR4.00 43.00 GR4.00 44.00 GR4.00 45.00 GR4.00 46.00 GR4.00 47.00 GR4.00 48.00 GR4.00 48.504.00 49.00 GR4.00 50.00 GR4.00 51.00 GR4.00 52.00 GR4.00 53.00 GR4.00 54.00 GR4.00 54.50 V554.00 55.00 GR4.00 56.00 GR4.00 57.00 GR4.00 58.00 GR4.00 59.00 GR4.00 60.00 GR4.00 61.00 GR4.00 62.00 GR4.00 63.00 GR4.00 64.00 GR4.00 65.00 GR4.00 66.00 GR4.00 67.00 GR4.00 68.00 GR

OR

M S

erie

s M

etric

O-R

ings

102 METRIC O-RINGS

Cross Section

InsideDiameter Std.

4.00 69.00 V70,GR4.00 70.00 GR4.00 71.00 GR4.00 72.00 GR4.00 73.00 GR4.00 74.00 GR4.00 75.00 GR4.00 76.00 GR4.00 77.00 GR4.00 78.00 GR4.00 79.00 GR4.00 79.504.00 80.00 GR4.00 81.00 GR4.00 82.00 GR4.00 83.00 GR4.00 84.00 V85,GR4.00 85.00 GR4.00 86.00 GR4.00 87.00 GR4.00 88.00 GR4.00 89.00 GR4.00 90.00 GR4.00 91.00 GR4.00 92.00 GR4.00 93.00 GR4.00 94.00 GR4.00 94.504.00 95.00 GR4.00 96.00 GR4.00 97.00 GR4.00 98.00 GR4.00 99.00 V100,GR4.00 100.00 GR4.00 101.00 GR4.00 102.00 GR4.00 103.00 GR4.00 104.00 GR4.00 105.00 GR4.00 106.00 GR4.00 107.00 GR4.00 108.00 GR4.00 109.00 GR4.00 110.00 GR4.00 111.00 GR

Cross Section

InsideDiameter Std.

4.00 112.00 GR4.00 113.00 GR4.00 114.00 GR4.00 115.00 GR4.00 116.00 GR4.00 117.00 GR4.00 117.504.00 118.00 GR4.00 118.404.00 119.00 V120,GR4.00 120.00 GR4.00 121.00 GR4.00 122.00 GR4.00 123.00 GR4.00 124.00 GR4.00 125.00 GR4.00 126.00 GR4.00 127.00 GR4.00 128.00 GR4.00 129.00 GR4.00 130.00 GR4.00 131.00 GR4.00 132.00 GR4.00 133.00 GR4.00 134.00 GR4.00 135.00 GR4.00 135.504.00 136.00 GR4.00 137.00 GR4.00 138.00 GR4.00 139.00 GR4.00 139.504.00 140.00 GR4.00 141.00 GR4.00 142.00 GR4.00 143.00 GR4.00 144.00 GR4.00 145.00 GR4.00 146.00 GR4.00 147.00 GR4.00 148.00 GR4.00 148.50 V1504.00 149.00 GR4.00 150.00 GR4.00 151.00 GR

OR

M S

erie

s M

etric

O-R

ings

103METRIC O-RINGS

Cross Section

InsideDiameter Std.

4.00 152.00 GR4.00 153.00 GR4.00 154.00 GR4.00 155.00 GR4.00 156.00 GR4.00 157.00 GR4.00 158.00 GR4.00 159.00 GR4.00 160.00 GR4.00 161.00 GR4.00 162.00 GR4.00 163.00 GR4.00 164.00 GR4.00 165.00 GR4.00 166.00 GR4.00 167.00 GR4.00 168.00 GR4.00 169.00 GR4.00 170.00 GR4.00 170.404.00 171.00 GR4.00 172.00 GR4.00 173.00 V175,GR4.00 174.00 GR4.00 175.00 GR4.00 176.00 GR4.00 177.00 GR4.00 178.00 GR4.00 179.00 GR4.00 180.00 GR4.00 181.00 GR4.00 182.00 GR4.00 183.00 GR4.00 184.00 GR4.00 185.00 GR4.00 186.00 GR4.00 187.00 GR4.00 188.00 GR4.00 189.00 GR4.00 190.00 GR4.00 191.00 GR4.00 192.00 GR4.00 193.00 GR4.00 194.00 GR4.00 195.00 GR

Cross Section

InsideDiameter Std.


OR

M S

erie

s M

etric

O-R

ings

104 METRIC O-RINGS

Cross Section

InsideDiameter Std.


Cross Section

InsideDiameter Std.


OR

M S

erie

s M

etric

O-R

ings

105METRIC O-RINGS

Cross Section

InsideDiameter Std.


Cross Section

InsideDiameter Std.


OR

M S

erie

s M

etric

O-R

ings

106 METRIC O-RINGS

CrossSection

InsideDiameter Std.


CrossSection

InsideDiameter Std.

4.00 466.00 GR4.00 467.00 GR4.00 468.00 GR4.00 469.00 GR4.00 470.00 GR4.00 471.00 GR4.00 472.00 GR4.00 473.00 GR4.00 474.00 GR4.00 475.00 GR4.00 476.00 GR4.00 477.00 GR4.00 478.00 GR4.00 479.00 GR4.00 480.00 GR4.00 481.00 GR4.00 482.00 GR4.00 482.00 GR4.00 483.00 GR4.00 484.00 GR4.00 485.00 GR4.00 486.00 GR4.00 487.00 GR4.00 488.00 GR4.00 489.00 GR4.00 490.00 GR4.00 491.00 GR4.00 492.00 GR4.00 493.00 GR4.00 494.00 GR4.00 495.00 GR4.00 496.00 GR4.00 497.00 GR4.00 498.00 GR4.00 499.00 GR4.00 500.00 GR4.00 505.004.00 530.004.00 562.004.00 570.004.00 585.004.00 655.004.10 29.40 BS4.10 31.40 BS4.10 32.40 BS

OR

M S

erie

s M

etric

O-R

ings

107METRIC O-RINGS

CrossSection

InsideDiameter Std.

4.10 34.40 BS4.10 35.40 BS4.10 36.40 BS4.10 37.40 BS4.10 39.40 BS4.10 41.40 BS4.10 42.40 BS4.10 44.40 BS4.10 45.40 BS4.10 49.40 BS4.10 52.40 BS4.10 54.40 BS4.10 55.40 BS4.10 59.40 BS4.10 62.40 BS4.10 64.40 BS4.10 69.40 BS4.10 72.40 BS4.10 74.40 BS4.10 79.40 BS4.10 84.40 BS4.10 89.40 BS4.10 92.40 BS4.10 94.40 BS4.10 99.40 BS4.10 104.40 BS4.10 109.40 BS4.10 114.40 BS4.10 117.40 BS4.10 119.40 BS4.10 124.40 BS4.10 129.40 BS4.10 134.40 BS4.10 139.40 BS4.10 144.40 BS4.10 149.40 BS4.10 152.40 BS4.10 154.40 BS4.10 159.40 BS4.10 164.40 BS4.10 169.40 BS4.10 174.40 BS4.10 179.40 BS4.10 184.40 BS4.10 189.40 BS

CrossSection

InsideDiameter Std.

4.10 192.40 BS4.10 194.40 BS4.10 199.40 BS4.10 209.40 BS4.10 212.40 BS4.10 219.40 BS4.10 229.40 BS4.10 239.40 BS4.10 242.40 BS4.10 249.40 BS4.10 259.40 BS4.10 269.40 BS4.10 272.40 BS4.10 279.40 BS4.10 289.40 BS4.10 299.40 BS4.20 15.504.20 24.304.20 48.504.20 145.004.30 28.104.30 78.004.30 96.004.30 117.074.50 6.004.50 8.004.50 9.004.50 9.504.50 10.004.50 10.504.50 11.004.50 11.504.50 12.004.50 13.004.50 13.504.50 15.004.50 15.504.50 16.004.50 17.004.50 18.004.50 19.004.50 20.004.50 21.004.50 21.504.50 22.00

OR

M S

erie

s M

etric

O-R

ings

108 METRIC O-RINGS

CrossSection

InsideDiameter Std.

4.50 22.504.50 23.004.50 24.004.50 24.504.50 25.004.50 26.004.50 27.004.50 27.504.50 28.004.50 28.504.50 29.004.50 29.504.50 30.004.50 31.004.50 31.504.50 32.004.50 33.004.50 34.004.50 34.504.50 35.004.50 35.504.50 36.004.50 37.004.50 37.504.50 38.004.50 39.004.50 40.004.50 40.504.50 41.004.50 41.404.50 42.004.50 43.004.50 44.004.50 45.004.50 46.004.50 47.004.50 48.004.50 49.004.50 50.004.50 51.004.50 53.004.50 54.004.50 55.004.50 56.004.50 57.00

CrossSection

InsideDiameter Std.

4.50 59.004.50 60.004.50 61.004.50 63.004.50 64.004.50 65.004.50 66.004.50 68.004.50 69.004.50 70.004.50 71.004.50 73.004.50 74.004.50 75.004.50 76.004.50 80.004.50 81.004.50 83.004.50 85.004.50 86.004.50 89.004.50 90.004.50 92.004.50 93.504.50 95.004.50 96.004.50 97.504.50 98.004.50 99.504.50 100.004.50 100.504.50 101.004.50 103.504.50 104.504.50 105.004.50 106.004.50 110.004.50 115.004.50 116.004.50 118.004.50 120.004.50 122.004.50 124.004.50 126.004.50 128.00

OR

M S

erie

s M

etric

O-R

ings

109METRIC O-RINGS

CrossSection

InsideDiameter Std.

4.50 130.004.50 131.504.50 134.504.50 137.004.50 140.004.50 140.504.50 150.004.50 153.004.50 155.004.50 157.004.50 160.004.50 165.004.50 172.004.50 178.004.50 180.004.50 185.004.50 186.004.50 189.504.50 192.004.50 208.004.50 215.004.50 218.004.50 218.504.50 225.004.50 227.004.50 250.004.50 267.004.50 280.004.50 315.004.50 616.504.60 70.504.75 18.295.00 4.00 GR5.00 5.00 GR5.00 6.00 GR5.00 7.00 GR5.00 8.00 GR5.00 9.00 GR5.00 10.00 GR5.00 10.00 GR5.00 10.805.00 11.00 GR5.00 12.00 GR5.00 13.00 GR5.00 14.00 GR

CrossSection

InsideDiameter Std.

5.00 15.00 GR5.00 16.00 GR5.00 17.00 GR5.00 18.00 GR5.00 19.00 GR5.00 20.00 GR5.00 21.00 GR5.00 22.00 GR5.00 23.00 GR5.00 24.00 GR5.00 25.00 GR5.00 26.00 GR5.00 27.00 GR5.00 28.00 GR5.00 29.00 GR5.00 30.00 GR5.00 30.105.00 31.00 GR5.00 32.00 GR5.00 33.00 GR5.00 34.00 GR5.00 35.00 GR5.00 36.00 GR5.00 37.00 GR5.00 38.00 GR5.00 39.00 GR5.00 40.00 GR5.00 41.00 GR5.00 42.00 GR5.00 43.00 GR5.00 44.00 GR5.00 45.00 GR5.00 46.00 GR5.00 47.00 GR5.00 48.00 GR5.00 49.00 GR5.00 50.00 GR5.00 51.00 GR5.00 52.00 GR5.00 53.00 GR5.00 54.00 GR5.00 55.00 GR5.00 56.00 GR5.00 57.00 GR5.00 58.00 GR

OR

M S

erie

s M

etric

O-R

ings

110 METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.00 59.00 GR5.00 60.00 GR5.00 61.00 GR5.00 62.00 GR5.00 63.00 GR5.00 64.00 GR5.00 65.00 GR5.00 66.00 GR5.00 67.00 GR5.00 68.00 GR5.00 69.00 GR5.00 70.00 GR5.00 71.00 GR5.00 72.00 GR5.00 73.00 GR5.00 74.00 GR5.00 75.00 GR5.00 76.00 GR5.00 77.00 GR5.00 78.00 GR5.00 79.00 GR5.00 80.00 GR5.00 81.00 GR5.00 82.00 GR5.00 83.00 GR5.00 84.00 GR5.00 85.00 GR5.00 86.00 GR5.00 87.00 GR5.00 88.00 GR5.00 89.00 GR5.00 90.00 GR5.00 91.00 GR5.00 92.00 GR5.00 93.00 GR5.00 94.00 GR5.00 95.00 GR5.00 96.00 GR5.00 97.00 GR5.00 98.00 GR5.00 99.00 GR5.00 100.00 GR5.00 101.00 GR5.00 102.00 GR5.00 102.20

CrossSection

InsideDiameter Std.


OR

M S

erie

s M

etric

O-R

ings

111METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.00 148.00 GR5.00 149.00 GR5.00 150.00 GR5.00 151.00 GR5.00 152.00 GR5.00 153.00 GR5.00 154.00 GR5.00 155.00 GR5.00 156.00 GR5.00 157.00 GR5.00 158.00 GR5.00 159.00 GR5.00 160.00 GR5.00 161.00 GR5.00 162.00 GR5.00 163.00 GR5.00 164.00 GR5.00 165.00 GR5.00 166.00 GR5.00 167.00 GR5.00 168.00 GR5.00 169.00 GR5.00 170.00 GR5.00 171.00 GR5.00 172.00 GR5.00 173.00 GR5.00 174.00 GR5.00 175.00 GR5.00 176.00 GR5.00 177.00 GR5.00 178.00 GR5.00 179.005.00 180.00 GR5.00 181.00 GR5.00 182.00 GR5.00 183.00 GR5.00 184.00 GR5.00 185.00 GR5.00 186.00 GR5.00 187.00 GR5.00 188.00 GR5.00 189.00 GR5.00 190.00 GR5.00 191.00 GR5.00 192.00 GR

CrossSection

InsideDiameter Std.


OR

M S

erie

s M

etric

O-R

ings

112 METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.00 238.00 GR5.00 239.00 GR5.00 240.00 GR5.00 241.00 GR5.00 242.00 GR5.00 243.00 GR5.00 244.00 GR5.00 245.00 GR5.00 246.00 GR5.00 247.00 GR5.00 248.00 GR5.00 249.00 GR5.00 250.00 GR5.00 251.00 GR5.00 252.00 GR5.00 253.00 GR5.00 254.00 GR5.00 255.00 GR5.00 256.00 GR5.00 257.00 GR5.00 258.00 GR5.00 259.00 GR5.00 260.00 GR5.00 261.00 GR5.00 262.00 GR5.00 263.00 GR5.00 264.00 GR5.00 265.00 GR5.00 266.00 GR5.00 267.00 GR5.00 268.00 GR5.00 269.00 GR5.00 270.00 GR5.00 271.00 GR5.00 272.00 GR5.00 273.00 GR5.00 274.00 GR5.00 275.00 GR5.00 276.00 GR5.00 277.005.00 278.00 GR5.00 279.00 GR5.00 280.00 GR5.00 281.00 GR5.00 282.00 GR

CrossSection

InsideDiameter Std.


OR

M S

erie

s M

etric

O-R

ings

113METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.00 328.00 GR5.00 329.00 GR5.00 330.00 GR5.00 331.00 GR5.00 332.00 GR5.00 333.00 GR5.00 334.00 GR5.00 335.00 GR5.00 336.00 GR5.00 337.00 GR5.00 338.00 GR5.00 339.00 GR5.00 339.305.00 340.00 GR5.00 341.00 GR5.00 342.00 GR5.00 343.005.00 344.00 GR5.00 345.00 GR5.00 346.00 GR5.00 347.00 GR5.00 348.00 GR5.00 349.00 GR5.00 350.00 GR5.00 351.00 GR5.00 352.00 GR5.00 353.00 GR5.00 354.00 GR5.00 355.00 GR5.00 356.00 GR5.00 357.00 GR5.00 358.00 GR5.00 359.00 GR5.00 360.00 GR5.00 361.00 GR5.00 362.00 GR5.00 363.00 GR5.00 364.00 GR5.00 365.00 GR5.00 366.00 GR5.00 367.00 GR5.00 368.00 GR5.00 369.00 GR5.00 370.00 GR5.00 371.00 GR

CrossSection

InsideDiameter Std.

5.00 372.00 GR5.00 373.00 GR5.00 374.00 GR5.00 375.00 GR5.00 376.00 GR5.00 377.00 GR5.00 378.00 GR5.00 379.00 GR5.00 380.00 GR5.00 381.00 GR5.00 382.00 GR5.00 383.00 GR5.00 384.00 GR5.00 385.00 GR5.00 386.00 GR5.00 387.00 GR5.00 388.00 GR5.00 389.00 GR5.00 390.00 GR5.00 391.00 GR5.00 392.00 GR5.00 393.00 GR5.00 394.00 GR5.00 395.00 GR5.00 396.00 GR5.00 397.00 GR5.00 398.00 GR5.00 399.00 GR5.00 399.305.00 400.005.00 402.005.00 410.005.00 415.005.00 420.005.00 425.005.00 427.005.00 432.005.00 440.005.00 450.005.00 455.005.00 460.005.00 485.005.00 490.005.00 500.005.00 525.00

OR

M S

erie

s M

etric

O-R

ings

114 METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.00 530.005.00 560.005.00 600.005.00 670.005.00 690.005.00 720.005.00 736.005.00 800.005.10 89.105.30 35.005.30 40.00 ISO-36015.30 40.505.30 41.20 ISO-36015.30 41.405.30 42.50 ISO-36015.30 43.70 ISO-36015.30 45.00 ISO-36015.30 46.20 ISO-36015.30 47.50 ISO-36015.30 48.70 ISO-36015.30 50.00 ISO-36015.30 51.50 ISO-36015.30 53.00 ISO-36015.30 54.405.30 54.50 ISO-36015.30 56.00 ISO-36015.30 58.00 ISO-36015.30 60.00 ISO-36015.30 61.50 ISO-36015.30 63.00 ISO-36015.30 65.00 ISO-36015.30 67.00 ISO-36015.30 69.00 ISO-36015.30 71.00 ISO-36015.30 73.00 ISO-36015.30 75.00 ISO-36015.30 77.50 ISO-36015.30 80.00 ISO-36015.30 82.50 ISO-36015.30 85.00 ISO-36015.30 87.50 ISO-36015.30 90.00 ISO-36015.30 92.50 ISO-36015.30 95.00 ISO-36015.30 97.50 ISO-3601

CrossSection

InsideDiameter Std.

5.30 100.00 ISO-36015.30 103.00 ISO-36015.30 106.00 ISO-36015.30 109.00 ISO-36015.30 112.00 ISO-36015.30 115.00 ISO-36015.30 118.00 ISO-36015.30 122.00 ISO-36015.30 125.00 ISO-36015.30 128.00 ISO-36015.30 132.00 ISO-36015.30 136.00 ISO-36015.30 140.00 ISO-36015.30 145.00 ISO-36015.30 150.00 ISO-36015.30 154.005.30 155.00 ISO-36015.30 160.00 ISO-36015.30 165.00 ISO-36015.30 170.00 ISO-36015.30 175.00 ISO-36015.30 180.00 ISO-36015.30 185.00 ISO-36015.30 190.00 ISO-36015.30 195.00 ISO-36015.30 200.00 ISO-36015.30 206.00 ISO-36015.30 212.00 ISO-36015.30 218.00 ISO-36015.30 224.00 ISO-36015.30 230.00 ISO-36015.30 236.00 ISO-36015.30 243.00 ISO-36015.30 250.00 ISO-36015.30 258.00 ISO-36015.30 265.00 ISO-36015.30 272.00 ISO-36015.30 280.00 ISO-36015.30 290.00 ISO-36015.30 300.00 ISO-36015.30 307.00 ISO-36015.30 315.00 ISO-36015.30 325.00 ISO-36015.30 335.00 ISO-36015.30 345.00 ISO-3601

OR

M S

erie

s M

etric

O-R

ings

115METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.30 355.00 ISO-36015.30 365.00 ISO-36015.30 375.00 ISO-36015.30 387.00 ISO-36015.30 400.00 ISO-36015.33 10.46 2-3095.33 12.07 2-3105.33 13.64 2-3115.33 15.24 2-3125.33 16.81 2-3135.33 18.42 2-3145.33 19.99 2-3155.33 21.59 2-3165.33 21.995.33 23.16 2-3175.33 24.77 2-3185.33 26.34 2-3195.33 27.94 2-3205.33 29.51 2-3215.33 31.12 2-3225.33 32.69 2-3235.33 34.29 2-3245.33 37.47 R28,2-3255.33 40.64 R29,2-3265.33 43.82 R30,2-3275.33 46.99 R31,2-3285.33 50.17 R32,2-3295.33 53.34 R33,2-3305.33 56.52 R34,2-3315.33 59.69 R35,2-3325.33 62.87 R36,2-3335.33 66.04 R37,2-3345.33 69.22 R38,2-3355.33 72.39 R39,2-3365.33 74.635.33 75.57 R40,2-3375.33 78.74 R41,2-3385.33 78.935.33 79.735.33 79.775.33 81.92 R42,2-3395.33 85.09 R43,2-3405.33 86.695.33 87.905.33 88.27 R44,2-341

CrossSection

InsideDiameter Std.

5.33 89.695.33 91.44 R45,2-3425.33 94.62 R46,2-3435.33 97.79 R47,2-3445.33 100.005.33 100.97 R48,2-3455.33 102.105.33 104.14 R49,2-3465.33 107.32 R50,2-3475.33 109.505.33 109.545.33 110.49 R51,2-3485.33 113.67 R52,2-3495.33 116.84 2-3505.33 117.485.33 117.505.33 120.02 2-3515.33 120.655.33 120.705.33 123.19 2-3525.33 123.805.33 123.835.33 126.37 2-3535.33 127.005.33 129.54 2-3545.33 130.185.33 130.205.33 132.72 2-3555.33 133.355.33 133.405.33 135.89 2-3565.33 136.505.33 136.535.33 138.705.33 139.07 2-3575.33 139.705.33 142.24 2-3585.33 142.885.33 142.905.33 145.42 2-3595.33 146.055.33 146.105.33 148.59 2-3605.33 149.205.33 149.23

OR

M S

erie

s M

etric

O-R

ings

116 METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.33 151.77 2-3615.33 155.005.33 158.12 2-3625.33 161.305.33 164.47 2-3635.33 167.705.33 170.82 2-3645.33 174.005.33 177.17 2-3655.33 183.52 2-3665.33 186.445.33 189.87 2-3675.33 196.22 2-3685.33 202.57 2-3695.33 208.92 2-3705.33 215.27 2-3715.33 221.62 2-3725.33 227.97 2-3735.33 234.32 2-3745.33 240.325.33 240.67 2-3755.33 247.02 2-3765.33 253.37 2-3775.33 266.07 2-3785.33 278.77 2-3795.33 291.47 2-3805.33 304.17 2-3815.33 310.005.33 324.005.33 329.57 2-3825.33 345.005.33 354.97 2-3835.33 365.005.33 380.37 2-3845.33 399.425.33 405.26 2-3855.33 430.66 2-3865.33 456.06 2-3875.33 481.41 2-3885.33 491.505.33 506.81 2-3895.33 532.21 2-3905.33 557.61 2-3915.33 582.68 2-3925.33 608.08 2-393

CrossSection

InsideDiameter Std.

5.33 633.48 2-3945.33 658.88 2-3955.34 89.695.35 109.545.35 136.505.50 20.005.50 28.005.50 29.505.50 30.005.50 39.505.50 47.005.50 54.005.50 60.005.50 68.005.50 72.005.50 75.005.50 83.005.50 106.005.50 115.005.50 177.005.70 2.405.70 9.935.70 19.205.70 20.935.70 32.005.70 32.205.70 33.005.70 35.20 SW5.70 36.20 SW5.70 37.20 SW5.70 38.805.70 39.20 SW5.70 40.005.70 41.20 SW5.70 42.205.70 44.20 SW5.70 44.30 BS5.70 45.20 SW5.70 45.30 BS5.70 47.20 SW5.70 47.60 P48A5.70 49.20 SW5.70 49.30 BS5.70 49.60 P50A5.70 51.20 SW

OR

M S

erie

s M

etric

O-R

ings

117METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.70 51.60 P525.70 52.20 SW5.70 52.30 BS5.70 52.505.70 52.60 P535.70 54.20 SW5.70 54.30 BS5.70 54.60 P555.70 55.30 BS5.70 55.60 P565.70 57.20 SW5.70 57.60 P585.70 59.20 SW5.70 59.30 BS5.70 59.60 P605.70 59.705.70 60.005.70 61.20 SW5.70 61.60 P625.70 62.005.70 62.20 SW5.70 62.30 BS5.70 62.60 P635.70 64.005.70 64.20 SW5.70 64.30 BS5.70 64.60 P655.70 66.205.70 66.60 P675.70 67.20 SW5.70 69.005.70 69.20 SW5.70 69.30 BS5.70 69.60 P705.70 70.205.70 70.60 P715.70 71.20 SW5.70 72.20 SW5.70 74.005.70 74.20 SW5.70 74.30 BS5.70 74.60 P755.70 77.20 SW5.70 79.005.70 79.20 SW

CrossSection

InsideDiameter Std.

5.70 79.30 BS5.70 79.60 P805.70 81.20 SW5.70 82.20 SW5.70 84.005.70 84.105.70 84.20 SW5.70 84.30 BS5.70 84.60 P855.70 87.20 SW5.70 89.005.70 89.105.70 89.20 SW5.70 89.30 BS5.70 89.60 P905.70 92.20 SW5.70 94.005.70 94.105.70 94.20 SW5.70 94.30 BS5.70 94.60 P955.70 97.20 SW5.70 99.005.70 99.105.70 99.20 SW5.70 99.30 BS5.70 99.60 P1005.70 101.60 P1025.70 104.005.70 104.105.70 104.20 SW5.70 104.30 BS5.70 104.60 P1055.70 109.005.70 109.105.70 109.20 SW5.70 109.30 BS5.70 109.60 P1105.70 111.60 P1125.70 112.305.70 114.005.70 114.20 SW5.70 114.30 BS5.70 114.60 P1155.70 119.00

OR

M S

erie

s M

etric

O-R

ings

118 METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.70 119.20 SW5.70 119.30 BS5.70 119.60 P1205.70 124.005.70 124.20 SW5.70 124.30 BS5.70 124.60 P1255.70 129.20 SW5.70 129.30 BS5.70 129.60 P1305.70 131.60 P1325.70 132.305.70 134.20 SW5.70 134.30 BS5.70 134.60 P1355.70 139.20 SW5.70 139.30 BS5.70 139.60 P1405.70 144.20 SW5.70 144.30 BS5.70 144.60 P1455.70 145.005.70 147.005.70 149.20 SW5.70 149.30 BS,G1505.70 149.60 P1505.70 150.005.70 153.005.70 154.20 SW5.70 154.30 BS,G1555.70 159.20 SW5.70 159.30 BS,G1605.70 164.20 SW5.70 164.30 BS,G1655.70 169.30 SW5.70 174.20 SW5.70 174.30 BS,G1755.70 179.20 SW5.70 179.30 BS,G1805.70 184.20 SW5.70 184.30 BS,G1855.70 189.20 SW5.70 189.30 BS,G1905.70 194.20 SW5.70 194.30 BS,G195

CrossSection

InsideDiameter Std.

5.70 199.20 SW5.70 199.30 BS,G2005.70 204.20 SW5.70 209.20 SW5.70 209.30 BS,G2105.70 219.20 SW5.70 219.30 BS,G2205.70 224.305.70 229.20 SW5.70 229.30 BS,G2305.70 239.20 SW5.70 239.30 BS,G2405.70 249.20 SW5.70 249.30 BS,G2505.70 259.20 SW5.70 259.30 BS,G2605.70 269.20 SW5.70 269.30 BS,G2705.70 279.20 SW5.70 279.30 BS,G2805.70 289.20 SW5.70 289.30 BS,G2905.70 299.20 SW5.70 299.30 BS,G3005.70 319.20 SW5.70 319.30 BS5.70 329.305.70 339.20 SW5.70 339.30 BS5.70 359.20 SW5.70 359.30 BS5.70 368.005.70 369.305.70 379.20 SW5.70 379.30 BS5.70 399.20 SW5.70 399.30 BS5.70 419.20 SW5.70 419.30 BS5.70 439.20 SW5.70 439.30 BS5.70 459.20 SW5.70 459.30 BS5.70 479.20 SW5.70 479.30 BS

OR

M S

erie

s M

etric

O-R

ings

119METRIC O-RINGS

CrossSection

InsideDiameter Std.

5.70 499.20 SW5.70 499.30 BS5.70 510.005.70 519.305.70 526.405.70 529.305.70 536.605.70 539.305.70 558.005.70 594.005.70 664.005.70 725.005.70 836.005.70 939.905.72 132.335.80 46.605.80 109.305.80 115.805.80 132.805.80 142.806.00 6.00 ISO-36016.00 7.00 ISO-36016.00 9.00 ISO-36016.00 10.00 ISO-36016.00 11.00 ISO-36016.00 12.00 ISO-36016.00 13.00 ISO-36016.00 14.00 ISO-36016.00 15.00 ISO-36016.00 16.00 ISO-36016.00 18.00 ISO-36016.00 19.00 ISO-36016.00 19.50 ISO-36016.00 20.00 ISO-36016.00 21.00 ISO-36016.00 22.00 ISO-36016.00 23.00 ISO-36016.00 23.50 ISO-36016.00 24.00 ISO-36016.00 25.00 ISO-36016.00 26.00 ISO-36016.00 27.00 ISO-36016.00 28.00 ISO-36016.00 29.00 ISO-36016.00 30.00 ISO-3601

CrossSection

InsideDiameter Std.

6.00 31.00 ISO-36016.00 32.00 ISO-36016.00 33.00 ISO-36016.00 34.00 ISO-36016.00 35.00 ISO-36016.00 36.00 ISO-36016.00 37.00 ISO-36016.00 38.00 ISO-36016.00 39.00 ISO-36016.00 39.50 ISO-36016.00 40.00 ISO-36016.00 41.00 ISO-36016.00 41.50 ISO-36016.00 42.00 ISO-36016.00 43.00 ISO-36016.00 44.00 ISO-36016.00 44.50 ISO-36016.00 45.00 ISO-36016.00 46.00 ISO-36016.00 47.00 ISO-36016.00 48.00 ISO-36016.00 49.00 ISO-36016.00 50.00 ISO-36016.00 51.00 ISO-36016.00 52.00 ISO-36016.00 53.00 ISO-36016.00 54.00 ISO-36016.00 55.00 ISO-36016.00 56.00 ISO-36016.00 57.00 ISO-36016.00 58.00 ISO-36016.00 59.50 ISO-36016.00 60.00 ISO-36016.00 61.00 ISO-36016.00 62.00 ISO-36016.00 63.00 ISO-36016.00 64.00 ISO-36016.00 65.00 ISO-36016.00 66.00 ISO-36016.00 67.00 ISO-36016.00 68.00 ISO-36016.00 69.00 ISO-36016.00 70.00 ISO-36016.00 72.00 ISO-36016.00 73.00 ISO-3601

OR

M S

erie

s M

etric

O-R

ings

120 METRIC O-RINGS

CrossSection

InsideDiameter Std.

6.00 74.00 ISO-36016.00 75.00 ISO-36016.00 76.00 ISO-36016.00 78.00 ISO-36016.00 78.50 ISO-36016.00 79.00 ISO-36016.00 80.00 ISO-36016.00 81.00 ISO-36016.00 81.50 ISO-36016.00 82.006.00 84.00 ISO-36016.00 85.00 ISO-36016.00 86.00 ISO-36016.00 87.006.00 88.00 ISO-36016.00 89.006.00 90.00 ISO-36016.00 92.00 ISO-36016.00 93.00 ISO-36016.00 94.006.00 95.00 ISO-36016.00 96.00 ISO-36016.00 98.00 ISO-36016.00 99.00 ISO-36016.00 100.00 ISO-36016.00 101.00 ISO-36016.00 103.00 ISO-36016.00 104.00 ISO-36016.00 104.50 ISO-36016.00 105.00 ISO-36016.00 105.406.00 106.00 ISO-36016.00 108.00 ISO-36016.00 110.00 ISO-36016.00 111.00 ISO-36016.00 112.00 ISO-36016.00 114.00 ISO-36016.00 115.00 ISO-36016.00 118.00 ISO-36016.00 120.00 ISO-36016.00 122.00 ISO-36016.00 123.00 ISO-36016.00 124.00 ISO-36016.00 125.00 ISO-36016.00 128.00 ISO-3601

CrossSection

InsideDiameter Std.

6.00 130.00 ISO-36016.00 132.00 ISO-36016.00 134.00 ISO-36016.00 135.00 ISO-36016.00 136.00 ISO-36016.00 138.00 ISO-36016.00 139.20 ISO-36016.00 140.00 ISO-36016.00 142.00 ISO-36016.00 145.00 ISO-36016.00 146.00 ISO-36016.00 148.00 ISO-36016.00 150.00 ISO-36016.00 153.00 ISO-36016.00 154.00 ISO-36016.00 155.00 ISO-36016.00 155.50 ISO-36016.00 156.00 ISO-36016.00 157.00 ISO-36016.00 158.00 ISO-36016.00 159.00 ISO-36016.00 160.00 ISO-36016.00 162.00 ISO-36016.00 165.00 ISO-36016.00 166.00 ISO-36016.00 167.006.00 169.00 ISO-36016.00 170.00 ISO-36016.00 172.00 ISO-36016.00 175.00 ISO-36016.00 176.00 ISO-36016.00 180.00 ISO-36016.00 182.00 ISO-36016.00 184.00 ISO-36016.00 185.00 ISO-36016.00 188.00 ISO-36016.00 190.00 ISO-36016.00 191.00 ISO-36016.00 191.206.00 193.00 ISO-36016.00 195.00 ISO-36016.00 196.00 ISO-36016.00 198.00 ISO-36016.00 200.00 ISO-36016.00 201.00 ISO-3601

OR

M S

erie

s M

etric

O-R

ings

121METRIC O-RINGS

CrossSection

InsideDiameter Std.

6.00 202.00 ISO-36016.00 203.00 ISO-36016.00 203.50 ISO-36016.00 204.00 ISO-36016.00 205.00 ISO-36016.00 208.00 ISO-36016.00 210.00 ISO-36016.00 212.00 ISO-36016.00 215.00 ISO-36016.00 216.00 ISO-36016.00 217.00 ISO-36016.00 218.00 ISO-36016.00 220.00 ISO-36016.00 221.00 ISO-36016.00 222.50 V225,ISO-3601

6.00 225.00 ISO-36016.00 226.00 ISO-36016.00 228.006.00 229.00 ISO-36016.00 230.00 ISO-36016.00 235.00 ISO-36016.00 236.00 ISO-36016.00 237.00 ISO-36016.00 237.50 ISO-36016.00 238.00 ISO-36016.00 240.00 ISO-36016.00 242.00 ISO-36016.00 244.00 ISO-36016.00 247.00 ISO-36016.00 249.00 ISO-36016.00 250.00 ISO-36016.00 255.006.00 258.00 ISO-36016.00 259.00 ISO-36016.00 260.00 ISO-36016.00 262.00 ISO-36016.00 264.006.00 265.00 ISO-36016.00 266.00 ISO-36016.00 270.00 ISO-36016.00 272.00 V275,ISO-3601

6.00 278.00 ISO-36016.00 280.00 ISO-36016.00 284.00 ISO-36016.00 285.00 ISO-3601

CrossSection

InsideDiameter Std.

6.00 288.00 ISO-36016.00 290.00 ISO-36016.00 294.00 ISO-36016.00 295.00 ISO-36016.00 296.95 ISO-36016.00 300.00 ISO-36016.00 301.00 ISO-36016.00 305.00 ISO-36016.00 310.006.00 311.00 ISO-36016.00 315.00 ISO-36016.00 320.00 ISO-36016.00 321.50 V325,ISO-3601

6.00 324.00 ISO-36016.00 325.00 ISO-36016.00 330.00 ISO-36016.00 333.00 ISO-36016.00 335.00 ISO-36016.00 338.00 ISO-36016.00 340.00 ISO-36016.00 345.00 ISO-36016.00 348.00 ISO-36016.00 350.00 ISO-36016.00 355.00 ISO-36016.00 358.00 ISO-36016.00 360.00 ISO-36016.00 365.00 ISO-36016.00 368.00 ISO-36016.00 370.00 ISO-36016.00 375.00 ISO-36016.00 376.006.00 380.00 ISO-36016.00 385.00 ISO-36016.00 386.00 ISO-36016.00 387.006.00 388.00 ISO-36016.00 389.00 ISO-36016.00 390.00 ISO-36016.00 392.00 ISO-36016.00 394.00 ISO-36016.00 395.00 ISO-36016.00 398.00 ISO-36016.00 400.00 ISO-36016.00 405.006.00 410.00

OR

M S

erie

s M

etric

O-R

ings

122 METRIC O-RINGS

CrossSection

InsideDiameter Std.

6.00 415.00 ISO-36016.00 422.00 ISO-36016.00 425.006.00 425.50 V430,ISO-3601

6.00 429.00 ISO-36016.00 430.006.00 446.00 ISO-36016.00 448.00 ISO-36016.00 450.00 ISO-36016.00 453.00 ISO-36016.00 468.006.00 470.00 ISO-36016.00 478.00 ISO-36016.00 480.00 ISO-36016.00 483.00 ISO-36016.00 486.00 ISO-36016.00 489.00 ISO-36016.00 500.00 ISO-36016.00 504.00 ISO-36016.00 505.00 ISO-36016.00 508.00 ISO-36016.00 510.00 ISO-36016.00 516.00 ISO-36016.00 525.006.00 530.00 ISO-36016.00 540.00 ISO-36016.00 544.00 ISO-36016.00 549.00 ISO-36016.00 550.006.00 552.00 ISO-36016.00 555.00 ISO-36016.00 560.00 ISO-36016.00 568.006.00 569.00 ISO-36016.00 575.00 ISO-36016.00 579.00 ISO-36016.00 587.006.00 616.006.00 620.006.00 640.006.00 650.006.00 665.406.00 682.006.00 695.006.00 735.00

CrossSection

InsideDiameter Std.

6.22 156.116.30 156.006.30 180.006.30 224.006.35 39.676.35 53.986.35 298.456.50 27.006.50 38.506.50 48.006.50 76.406.50 90.006.50 130.006.50 160.006.90 122.006.99 12.006.99 66.056.99 113.67 R53,2-4256.99 114.706.99 116.84 R54,2-4266.99 120.02 R55,2-4276.99 123.19 R56,2-4286.99 124.606.99 126.37 R57,2-4296.99 129.54 R58,2-4306.99 132.72 R59,2-4316.99 134.506.99 135.89 R60,2-4326.99 139.07 R61,2-4336.99 142.24 R62,2-4346.99 145.42 R63,2-4356.99 148.59 R64,2-4366.99 151.77 R65,2-4376.99 155.606.99 158.12 R66,2-4386.99 159.506.99 161.906.99 164.47 R67,2-4396.99 166.706.99 168.306.99 170.82 R68,2-4406.99 174.606.99 177.17 R69,2-4416.99 181.006.99 183.52 R70,2-442

OR

M S

erie

s M

etric

O-R

ings

123METRIC O-RINGS

CrossSection

InsideDiameter Std.

6.99 187.306.99 189.87 R71,2-4436.99 193.706.99 196.22 R72,2-4446.99 200.006.99 202.57 R73,2-4456.99 208.926.99 215.27 R74,2-4466.99 221.626.99 227.97 R75,2-4476.99 234.306.99 234.326.99 240.67 R76,2-4486.99 247.006.99 253.37 R77,2-4496.99 259.006.99 259.706.99 266.07 R78,2-4506.99 272.406.99 278.77 R79,2-4516.99 285.106.99 291.47 R80,2-4526.99 297.806.99 304.17 R81,2-4536.99 310.506.99 316.87 R82,2-4546.99 323.20 5-9076.99 329.57 R83,2-4556.99 335.906.99 342.27 R84,2-4566.99 354.97 R85,2-4576.99 367.67 R86,2-4586.99 380.37 R87,2-4596.99 393.07 R88,2-4606.99 405.26 2-4616.99 417.96 2-4626.99 430.66 2-4636.99 443.36 2-4646.99 456.06 2-4656.99 468.76 2-4666.99 481.46 2-4676.99 494.16 2-4686.99 506.86 2-4696.99 532.26 2-4706.99 557.66 2-471

CrossSection

InsideDiameter Std.

6.99 582.68 2-4726.99 608.08 2-4736.99 633.48 2-4746.99 658.88 2-4757.00 12.007.00 26.007.00 30.007.00 32.007.00 33.007.00 50.007.00 52.007.00 57.007.00 58.007.00 60.007.00 62.007.00 64.007.00 65.007.00 68.007.00 70.007.00 72.007.00 75.007.00 79.007.00 89.007.00 95.007.00 99.007.00 106.007.00 120.007.00 139.007.00 166.707.00 186.007.00 187.307.00 192.007.00 195.007.00 196.007.00 200.007.00 206.00 ISO-36017.00 208.907.00 212.00 ISO-36017.00 218.00 ISO-36017.00 224.00 ISO-36017.00 230.00 ISO-36017.00 234.307.00 236.00 ISO-36017.00 243.00 ISO-36017.00 244.00

OR

M S

erie

s M

etric

O-R

ings

124 METRIC O-RINGS

CrossSection

InsideDiameter Std.

7.00 250.00 ISO-36017.00 258.00 ISO-36017.00 260.007.00 265.00 ISO-36017.00 272.00 ISO-36017.00 280.00 ISO-36017.00 285.107.00 290.00 ISO-36017.00 292.007.00 298.007.00 300.00 ISO-36017.00 307.00 ISO-36017.00 315.00 ISO-36017.00 320.007.00 325.00 ISO-36017.00 335.00 ISO-36017.00 345.00 ISO-36017.00 355.00 ISO-36017.00 362.007.00 365.00 ISO-36017.00 375.00 ISO-36017.00 387.00 ISO-36017.00 394.007.00 400.00 ISO-36017.00 403.007.00 410.007.00 412.00 ISO-36017.00 419.007.00 425.00 ISO-36017.00 432.507.00 437.00 ISO-36017.00 445.007.00 450.00 ISO-36017.00 457.207.00 461.007.00 462.00 ISO-36017.00 475.00 ISO-36017.00 476.007.00 477.007.00 487.00 ISO-36017.00 490.007.00 494.677.00 500.00 ISO-36017.00 504.007.00 515.00 ISO-3601

CrossSection

InsideDiameter Std.

7.00 520.007.00 527.007.00 530.00 ISO-36017.00 541.007.00 545.00 ISO-36017.00 545.477.00 560.00 ISO-36017.00 565.007.00 569.007.00 580.00 ISO-36017.00 596.007.00 596.277.00 600.00 ISO-36017.00 615.00 ISO-36017.00 623.657.00 630.00 ISO-36017.00 640.007.00 647.077.00 650.00 ISO-36017.00 667.007.00 670.00 ISO-36017.00 675.007.00 685.007.00 702.007.00 710.007.00 724.007.00 731.007.00 737.007.00 745.007.00 757.007.00 776.007.00 800.007.00 810.007.00 828.007.00 844.007.00 850.007.00 867.007.00 886.007.00 904.007.00 916.007.00 930.007.00 938.007.00 968.007.00 995.007.20 390.00

OR

M S

erie

s M

etric

O-R

ings

125METRIC O-RINGS

CrossSection

InsideDiameter Std.

7.25 73.507.30 230.007.40 278.707.49 29.467.50 45.307.50 48.007.50 61.507.50 100.007.50 129.507.50 170.008.00 14.008.00 22.008.00 30.008.00 38.008.00 43.008.00 45.008.00 46.008.00 48.008.00 52.008.00 55.008.00 58.008.00 61.008.00 73.008.00 80.008.00 82.208.00 90.008.00 91.508.00 110.008.00 112.008.00 114.008.00 119.008.00 132.008.00 150.008.00 155.008.00 175.008.00 180.008.00 184.008.00 210.008.00 216.008.00 219.508.00 230.008.00 234.008.00 250.008.00 270.008.00 275.00

CrossSection

InsideDiameter Std.

8.00 280.008.00 290.008.00 300.008.00 315.008.00 326.008.00 335.008.00 342.008.00 350.008.00 365.008.00 374.008.00 375.008.00 400.008.00 412.008.00 425.008.00 435.008.00 440.008.00 441.008.00 444.008.00 445.008.00 450.008.00 454.008.00 475.008.00 480.008.00 490.008.00 494.008.00 495.008.00 500.008.00 510.008.00 525.008.00 535.008.00 540.008.00 542.008.00 550.008.00 560.008.00 565.008.00 568.008.00 575.008.00 580.008.00 582.008.00 585.008.00 595.008.00 600.008.00 612.008.00 618.008.00 620.00

OR

M S

erie

s M

etric

O-R

ings

126 METRIC O-RINGS

Cross Section

InsideDiameter Std.

8.00 650.008.00 656.008.00 662.008.00 680.008.00 727.008.00 735.008.00 760.008.00 761.008.00 800.008.00 810.008.00 829.008.00 835.008.00 840.008.00 846.008.00 850.008.00 860.008.20 110.008.40 144.10 BS,SW8.40 149.10 BS,SW8.40 149.50 P150A8.40 154.10 BS,SW8.40 154.50 P1558.40 159.10 BS,SW8.40 159.50 P1608.40 164.10 BS,SW8.40 164.50 P1658.40 169.10 BS,SW8.40 169.50 P1708.40 174.10 BS,SW8.40 174.50 P1758.40 179.10 BS,SW8.40 179.50 P1808.40 184.10 BS,SW8.40 184.50 P1858.40 189.10 BS,SW8.40 189.50 P1908.40 194.10 BS,SW8.40 194.50 P1958.40 199.10 BS,SW

Cross Section

InsideDiameter Std.

8.40 199.50 P2008.40 204.10 BS8.40 204.50 P2058.40 208.50 P2098.40 209.10 BS8.40 209.50 P2108.40 214.50 P2158.40 219.10 BS,SW8.40 219.50 P2208.40 220.108.40 224.50 P2258.40 229.10 BS,SW8.40 229.50 P2308.40 234.10 BS8.40 234.50 P2358.40 239.10 BS,SW8.40 239.50 P2408.40 244.50 P2458.40 249.10 BS,SW8.40 249.50 P2508.40 254.50 P2558.40 259.50 P2608.40 264.50 P2658.40 269.50 P2708.40 274.50 P2758.40 279.50 P2808.40 284.50 P2858.40 289.50 P2908.40 294.50 P2958.40 299.50 P3008.40 314.50 P3158.40 319.50 P3208.40 329.508.40 334.50 P3358.40 339.50 P3408.40 341.008.40 354.50 P3558.40 359.50 P3608.40 372.00

OR

M S

erie

s M

etric

O-R

ings

127METRIC O-RINGS

Cross Section

InsideDiameter Std.

8.40 374.50 P3758.40 384.50 P3858.40 390.008.40 399.50 P4008.40 419.108.40 479.508.40 490.008.40 514.008.40 522.008.40 553.008.40 646.008.40 669.508.40 715.008.40 740.008.40 795.258.40 799.008.40 820.008.40 895.008.40 934.108.40 948.258.40 985.008.40 1014.00

8.50 28.008.50 110.008.60 35.008.60 260.009.00 3.009.00 48.009.00 68.009.00 108.009.00 110.009.00 128.009.00 245.009.00 335.009.50 66.009.50 75.709.50 93.209.50 102.809.53 238.13

Cross Section

InsideDiameter Std.

10.00 35.0010.00 40.0010.00 47.0010.00 48.0010.00 50.0010.00 65.0010.00 70.0010.00 80.0010.00 160.0010.00 220.0010.00 280.0010.00 290.0010.00 340.0010.00 350.0010.00 400.0010.00 475.00 V48010.00 490.0010.00 500.0010.00 524.50 V53010.00 550.0010.00 556.0010.00 557.0010.00 579.00 V58510.00 633.50 V64010.00 683.50 V69010.00 725.0010.00 732.50 V74010.00 782.00 V79010.00 800.0010.00 836.50 V84510.00 940.50 V95010.00 1044.00 V105510.50 88.6010.78 110.7410.78 142.1112.00 48.0012.00 582.0020.00 104.5020.00 210.00

OR

M S

erie

s M

etric

O-R

ings

128 O-RING KITS

Metric European O-Ring Kit – 32 Sizes – 408 Rings Order # KIT-O-RING-EURO-N70

Metric Japanese O-Ring Kit – 30 Sizes – 409 Rings Order # KIT-O-RING-JAPAN-N70

Metric and Inch O-Ring Kits

Parker Modular O-Ring Kit

The Benefits• Reduces downtime with the immediate availability of needed Parker O-rings.• Reduces labor costs – no longer will your mechanics and production personnel

have lost time while the correct O-ring is located.


P/N I.D. C/S P3 2.80 1.90 P4 3.80 1.90 P5 4.80 1.90 P6 5.80 1.90 P7 6.80 1.90 P8 7.80 1.90

P/N I.D. C/S P9 8.80 1.90 P10A 9.80 2.40 P11 10.80 2.40 P12 11.80 2.40 P14 13.80 2.40 P16 15.80 2.40

P/N I.D. C/S P18 17.80 2.40 P20 19.80 2.40 G20 20.00 3.00 G22 22.00 3.00 P22,4 22.10 3.50 G25 24.40 3.10

P/N I.D. C/S P25 24.70 3.50 P26 25.70 3.50 G30 29.40 3.10 P30 29.70 3.50 P32 31.70 3.50 P34 33.70 3.50

P/N I.D. C/S G35 34.40 3.10 P36 35.70 3.50 G40 39.40 3.10 P40 39.70 3.10 G45 44.70 3.10 P48 47.70 3.50

F-26 34 3.5 F-27 36 3.5 F-28 38 3.5 F-29 41 3.5 F-30 44 3.5 F-31 46 3.5 F-32 50 3.5

P/N I.D. C/S ON KIT F-01 3 2 F-02 5 2 F-03 6 2 F-04 8 2 F-05 10 2 F-06 13 2

F-07 10 2.5 F-08 12 2.5 F-09 14 2.5 F-10 15 2.5 F-11 16 2.5 F-12 18 2.5

F-13 20 2.5 F-14 21 2.5 F-15 22 2.5 F-16 18 3.5 F-17 20 3.5 F-18 22 3.5

F-19 23 3.5 F-20 25 3.5 F-21 27 3.5 F-22 28 3.5 F-23 30 3.5 F-24 31 3.5 F-25 32 3.5

P/N I.D. C/S ON KIT P/N I.D. C/S ON KIT

P/N I.D. C/S ON KIT P/N I.D. C/S ON KIT

Tol. Tol.Port O-Ring Parker ID ± W ±Thread Name Part No. mm mm mm mm

M8x1 M8 ISO O-Ring 0024-0063 6,10 0,13 1,60 0,08M10x1 M10 ISO O-Ring 0031-9063 8,10 0,13 1,60 0,08M12x1.5 M12 ISO O-Ring 0036-6087 9,30 0,13 2,20 0,08M14x1.5 M14 ISO O-Ring 0044-5087 11,30 0,13 2,20 0,08M16x1.5 M16 ISO O-Ring 0052-4087 13,30 0,15 2,20 0,08M18x1.5 M18 ISO O-Ring 0060-2087 15,30 0,18 2,20 0,08M22x1.5 M22 ISO O-Ring 0076-0087 19,30 0,20 2,20 0,08M27x2 M27 ISO O-Ring 0092-9114 23,60 0,23 2,90 0,10M33x2 M33 ISO O-Ring 0116-5114 29,60 0,30 2,90 0,10M42x2 M42 ISO O-Ring 0152-0114 38,60 0,36 2,90 0,10M48x2 M48 ISO O-Ring 0175-6114 44,60 0,41 2,90 0,10M60x2 M60 ISO O-Ring 0222-8114 56,60 0,46 2,90 0,10

O-Rings for Metric Tube Fittings (ISO 6149) (Similar to SAE J2244)Parker O-Ring & Engineered Seals Division is tooled in these sizes for Nitrile Rubber only

129O-RING KITS

P/N I.D. C/S 2-006 .114 .070 2-007 .145 .070 2-008 .176 .070 2-009 .208 .070 2-010 .239 .070 2-011 .301 .070 2-012 .364 .070 2-110 .362 .103

P/N I.D. C/S 2-111 .424 .103 2-112 .487 .103 2-113 .549 .103 2-114 .612 .103 2-115 .674 .103 2-116 .737 .103 2-210 .734 .139 2-211 .796 .139

P/N I.D. C/S 2-212 .859 .139 2-213 .921 .139 2-214 .984 .139 2-215 1.046 .139 2-216 1.109 .139 2-217 1.171 .139 2-218 1.234 .139 2-219 1.296 .139

P/N I.D. C/S 2-220 1.359 .139 2-221 1.421 .139 2-222 1.484 .139 2-325 1.475 .210 2-326 1.600 .210 2-327 1.725 .210 2-328 1.850 .210 2-329 1.975 .210

P/N I.D. C/S 2-330 2.100 .210 2-331 2.225 .210 2-332 2.350 .210 2-333 2.475 .210 2-334 2.600 .210

• Reduce costs by avoiding minimum order charge usually involved in obtaining a single item.

• Save money – lost O-rings are bought again and again.

The Contents• 37 of the most popular Parker O-ring sizes.• Over 485 O-rings in our standard kit.• Available Parker O-ring

compounds are nitrile, ethylene propylene, fluorocarbon, silicone, fluorosilicone, or any other Parker compound.

• Many custom materials are available to suit your precise requirements.

The Kit• Tough, high impact ABS plastic.• Heavy duty design with reinforced

hinges and metal hinge pins.• Easy-To-Read numbered plugs

have ridge to prevent O-rings from falling off.

• Large Cross-Reference Chart inside kit with nominal and actual dimensions of standard AS568C 2 dash O-ring sizes.

• Internal locking system stays intact, unlike others which are easily broken.• Easy accessibility of all O-rings due to modular plug design.• Built-in sizing blocks for checking cross-section of O-ring. Plugs double as

gauges for inside diameters (I.D.).

The Features• All plugs are removable and interchangeable.• With in-use experience, kit can be customized by user by ordering specific plug to

adjust kit inventory to actual needs.• Easy inventory – all O-rings are visible. Low inventory O-rings are very apparent.• Custom Kits Available – the concept of the Parker Modular O-Ring Kit, with its ease

of interchangeability allows for customizing with special sizes and materials.(1)

Zatkoff can also customize kits to your specifications by having the basic kit molded in your company colors with your logo and inside labels.

(1) Minimum order requirements may apply depending on your individual specifications and order quantity. Ordering # KIT-O-RING-N674-70.

Pages 4 through 63 and pages 128 through 129 reprinted here with permission from the Parker Hannifin Corporation.

AFLAS® is a registered trademark of Asahi Glass Co., Ltd.Freon® is a registered trademark of E.I. du Pont de Nemours & Co. Hifluor™ is a trademark of the Parker Hannifin Corporation.Neoprene® is a registered trademark of Denka Performance Elastomers LLC.Parofluor® is a registered trademark of Parker Hannifin Corporation.ULTRA™ is a trademark of the Parker Hannifin Corporation.Parbak® is a registered trademark of Parker Hannifin Corporation.Skydrol® is a registered trademark of Solutia Inc.Vamac® is a registered trademark of E.I. du Pont de Nemours & Co.Viton™ is a trademark of The Chemours Company.

General Notes

WARNING:

OFFER OF SALE

These products can expose you to chemicals including carbon black (airborne and extracts), antimony trioxide, titanium dioxide, silica (crystalline), di(2-ethylhexyl)phthalate, ethylene thiourea, acrylonitrile, 1,3-butadiene, epichlorohydrin, toluenediisocyanate, tetra uoroethylene, ethylbenzene, formaldehyde, furfuryl alcohol, glass fibers, methyl isobutyl ketone, nickel (metallic and compounds), lead and lead compounds which are known to the State of California to cause cancer; and 1,3-butadiene, epichlorohydrin, di(2-ethylhexyl)phthalate, di-isodecyl phthalate, ethylene thiourea, methyl isobutyl ketone, methanol, toluene, lead and lead compounds which are known to the State of California to cause birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The items described in this document are hereby offered for sale by Zatkoff Seals & Packings. This offer and its acceptance are governed exclusively by the provisions contained in Zatkoff Seals & Packings’ “Offer of Sale” located at www.zatkoff.com/terms.

Copyright © 2019, Zatkoff Seals & Packings, Farmington Hills, MI. All rights reserved.

Failure, improper selection or improper use of the products and/or systems described herein or related items may cause death, personal injury or property damage.

This document and other information from Zatkoff Seals & Packings provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these

products or systems, the user, through his or her own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Zatkoff Seals & Packings at any time.

ZSP C0003B 0919

SERVING CUSTOMERS WORLDWIDE

Zatkoff Seals & Packings has been delivering successful solutions to our customers since 1959. Now the largest independent seal distributor in the United States, Zatkoff Seals & Packings serves customers from all industries throughout the world.

Our resources provide an exceptional advantage to our customers. From an outstanding inventory, to custom manufacturing solutions, Zatkoff always puts its customers’ needs fi rst. Off ering premium services and products is at the forefront of what we do. Discover how Zatkoff Seals & Packings can provide innovative solutions that deliver your success.

SINCE 1959

// ZATKOFF.COM

Documents

O-RING GUIDE · Chloroprene Rubber CR CR Isobutene Isoprene Rubber (Butyl Rubber) IIR Chlorobutyl Rubber CIIR CIIR ... properties even though they are still considered elastomers