Normas y Estandar

8/10/2019 Normas y Estandar

http://slidepdf.com/reader/full/normas-y-estandar 1/20

Publisher Code or Standard

ABSA Alberta Boilers Safety Association AICHE ANSI K61.1 Safety Requirements for the Storage and Handling of Anhydrous Ammonia ANSI ANSI

API A. @ Interpretations API B. @ Exploration & Production API C. @ Petroleum Measurement (Manual of Petroleum Measurement Standards) API C. Chapter 1, Vocabulary API C. Chapter 10, Sediment and Water API C. Chapter 11, Physical Properties Data (Volume Correction Factors) API C. Chapter 12, Calculation of Petroleum Quantities API C. Chapter 13, Statistical Aspects of Measuring and Sampling API C. Chapter 14, Natural Gas Fluids Measurement API C. Chapter 15, Guidelines for Use of the International System of Units (SI) in the Petroleu API C. Chapter 16, Measurement of Hydrocarbon Fluids by W eight or Mass

API C. Chapter 17, Marine Measurement API C. Chapter 18, Custody Transfer API C. Chapter 19, Evaporation Loss Measurement API C. Chapter 2, Tank Calibration API C. Chapter 20, Allocation Measurement of Oil and Natural Gas API C. Chapter 21, Flow Measurement Using Electronic Metering Systems API C. Chapter 3, Tank Gauging API C. Chapter 4, Proving Systems API C. Chapter 5, Metering API C. Chapter 6, Metering Assemblies API C. Chapter 7, Temperature Determination API C. Chapter 8, Sampling API C. Chapter 9, Density Determination API D. @ Marine Transportation API E. @ Marketing API E. Publ 1612, Guidance Document for Discharging of Petroleum Distribution Terminal Eff luents to Publi

API E. Publ 1638, Waste Management Practices for Petroleum Marketing Facilities API F. @ Refining

API F.01 @ Inspection of Refining Equipment API F.01 API 510 Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repa API F.01 API 570 Piping Inspection Code: Inspection, Repair, Alteration & Rerating of In-Se API F.02 @ Mechanical Equipment Standards for Refinery Service API F.02 API 615, SoundControl of Mechanical Equipment for Refinery Services ??? API F.02 RP 686, Machinery Installation and Installation Design API F.02 Std 610, Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry

API F.02 Std 611, General Purpose Steam Turbines for Petroleum, Chemical, and Gas Indu API F.02 Std 612, Special Purpose Steam Turbines for Petroleum, Chemical, and Gas Indu API F.02 Std 616, Gas Turbines for the Petroleum, Chemical and Gas Industry Services API F.02 Std 617, Centrifugal Compressors for Petroleum, Chemical and Gas Industry Servi API F.02 Std 618, Reciprocating Compressors for Petroleum, Chemical and Gas Industry S API F.02 Std 619, Rotary-Type Positive Displacement Compressors for Petroleum, Chemical API F.02 Std 672, Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Ch API F.02 Std 674, Positive Displacement Pumps—Reciprocating, API F.02 Std 675, Positive Displacement Pumps—Controlled Volume



API F.02 Std 676, Positive Displacement Pumps—Rotary API F.02 Std 681, Liquid Ring Vacuum Pumps and Compressors API F.02 Std 682, Shaft Sealing Systems for Centrifugal and Rotary Pumps API F.02 Std 685, Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and G API F.03 @ Storage Tanks API F.04 @ Pressure Relieving Systems for Refinery Service API F.04 RP520 - Sizing, Selection & Installation of Pressure Relieving Devices in Refineries API F.04 RP520 - Sizing, Selection & Installation of Pressure Relieving Devices in Refineries API F.04 RP521 - Guide for Pressure-Relieving & Depressuring Systems API F.04 RP576 - Inspection of Pressure Relieving Devices API F.04 Std 2000, Venting Atmospheric and Low-Pressure Storage Tanks: Nonrefrigerated API F.04 Std 526, Flanged Steel Pressure Relief Valves API F.04 Std 527, Seat Tightness of Pressure Relief Valves API F.05 @ Piping Component Standards API F.05 API 574 Inspection Practices for Piping System Components API F.05 RP 578, Material Verification Program for New and Existing Alloy Piping Systems API F.05 RP 591, User Acceptance of Refinery Valves, API F.05 Std 589, Fire Test for Evaluation of Valve Stem Packing

API F.05 Std 594, Check Valves: Wafer, Wafer-Lug and Double Flanged Type API F.05 Std 598, Valve Inspection and Testing API F.05 Std 599, Metal Plug Valves—Flanged and Welding Ends, API F.05 Std 600, Steel Gate Valves—Flanged and Butt-Welding Ends, Bolted and Pressur API F.05 Std 602, Compact Steel Gate Valves—Flanged, Threaded, Welding, and Extende API F.05 Std 603, Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves API F.05 Std 607, Fire Test for Soft-Seated Quarter-Turn Valves API F.05 Std 608, Metal Ball Valves—Flanged, Threaded and Butt-Welding Ends API F.05 Std 609, Butterfly Valves: Double Flanged, Lug- and Wafer-Type API F.06 @ Electrical Installations and Equipment API F.06 RP 500, Recommended Practice for Classification of Locations for Electrical Install API F.06 RP 505, Recommended Practice for Classification of Locations for Electrical Install API F.06 Std 541, Form-Wound Squirrel-Cage Induction Motors—250 Horsepower and Larg API F.07 @ Heat Transfer Equipment Standards for Refinery Service API F.07 Publ 534, Heat Recovery Steam Generators API F.07 Publ 535, Burners for Fired Heaters in General Refinery Services API F.07 RP 531M, Measurement of Noise from Fired Process Heaters API F.07 RP 536, Post Combustion NOx Control for Equipment in General Refinery Services API F.07 RP 573, Inspection of Fired Boilers and Heaters API F.07 Std 530, Calculation of Heater Tube Thickness in Petroleum Refineries API F.07 Std 560, Fired Heaters for General Refinery Services API F.07 Std 660, Shell-and-Tube Heat Exchangers for General Refinery Services API F.07 Std 661, Air-Cooled Heat Exchangers for General Refinery Service API F.07 Std 662, Plate Heat Exchanger Specification Sheets in Electronic Format, Plate Heat Exch API F.07 Std 662, Plate Heat Exchangers for General Refinery Services

API F.08 @ Instrumentation and Control Manuals API F.08 API 555, Process Analyzers API F.08 RP 551, Process Measurement Instrumentation API F.08 RP 552, Transmission Systems API F.08 RP 553, Refinery Control Valves API F.08 RP 554, Process Instrumentation and Control API F.08 RP 556, Fired Heaters & Steam Generators API F.08 RP 557, Guide to Advanced Control Systems API F.09 @ Technical Data Book Petroleum Refining



API F.10 @ Characterization and Thermodynamics (of petroleum fractions) API F.11 @ Material Engineering Publications API F.11 Publ 935, Thermal Conductivity Measurement Study of Refractory Castables API F.11 Publ 939, Research Report on Characterization and Monitoring of Cracking in Wet API F.11 Publ 946, The Effect of Outgass ing Cycles on the Hydrogen Content in Pe trochemica l R API F.11 Publ 950, Survey of Construction Materials and Corrosion in Sour Water Strippers API F.11 RP 934, Materials and Fabrication Requirement for 2-1/4Cr-1MO & 3Cr-1Mo Steel API F.11 RP 936, Refractory Installation Quality Control Guidelines API F.11 RP 941, Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum API F.11 RP 945, Avoiding Environmental Cracking in Amine Units API F.12 @ Petroleum Products and Petroleum Product Surveys API F.12 Publ 4261, Alcohols and Ethers: A Technical Assessment of Their Application as API F.12 Std 1512, Petroleum Test Laboratory Accreditation Program API F.13 @ Health, Environment and Safety API F.13 Publ 421, Management of Water Discharges: Design and Operation of Oil-Water S API F.13 Publ 422, Groundwater Protection Programs for Petroleum Refining and Storage F API F.13 Publ 800, Literature Survey: Subsurface and Groundwater Protection Related to Petrol API F.13 Publ 958, Pilot Studies on the Toxicity of Effluents f rom Conventional and Carbon Enhanced Treatm

API F.13 RP 751, Safe Operation of Hydrofluoric Acid Alkylation Units API F.14 @ Market Data and Statistics API G. @ Safety and Fire Protection

API G.01 @ Publications API G.01 Pub 2378, 1999 Summary of Occupational Injuries, Illnesses and Fatalities in the API G.01 Publ 2009, Safe Welding and Cutting Practices in Refineries, Gasoline Plants, an API G.01 Publ 2028, Flame Arresters in Piping Systems API G.01 Publ 2030, Application of Water Spray Systems for Fire Protection in the Petroleu API G.01 Publ 2201, Procedures for Welding or Hot Tapping on Equipment in Service API G.01 Publ 2214, Spark Ignition Properties of Hand Tools API G.01 Publ 2216, Ignition Risk of Hydrocarbon Vapors by Hot Surfaces in the Open Air API G.01 Publ 2217A, Guidelines for Work in Inert Confined Spaces in the Petroleum Indust API G.01 Publ 2219, Safe Operation of Vacuum Trucks in Petroleum Service API G.01 Publ 2510A, Fire Protection Considerations for the Design and Operation of Liquefied Petr API G.01 Publ 760, Model Risk Management Plan Guidance for Petroleum Refineries—Guid API G.01 Publ 770, A Manager’s Guide to Reducing Human Errors; Improving Human Preformanc API G.01 RP 2001, Fire Protection in Refineries API G.01 RP 2003, Protection Against Ignitions Arising Out of Static , Lightning, and Stray C API G.01 RP 2210, Flame Arresters for Vents of Tanks Storing Petroleum Products API G.01 RP 2220, Improving Owner and Contractor Safety Performance API G.01 RP 2221, Manager’s Guide to Implementing a Contractor Safety Program API G.01 RP 750, Management of Process Hazards API G.01 RP 752, Management of Hazards Associated With Location of Process Plant Buil

API G.02 @ Storage Tank Safety Standards API G.02 Publ 2021, Fighting Fires In and Around Flammable and Combustible Liquid Atmospheric Petro

API G.02 Publ 2021A, Interim Study—Prevention and Suppress ion o f Fires in Large Aboveground API G.02 Publ 334, A Guide to Leak Detection for Aboveground Storage Tanks API G.02 RP 2350, Overfill Protection for Storage Tanks in Petroleum Facilities API G.02 Std 2015, Safe Entry and Cleaning of Petroleum Storage Tanks

API H. @ Storage Tanks API H. Air Emissions from Aboveground Storage Tanks Manual API H. Bull 2521, Use of Pressure-Vacuum Vent Valves for Atmospheric Loss API H. Chapter 19.1, Evaporative Loss From Fixed Roof Tanks API H. Chapter 19.1A, Evaporation Loss from Low-Pressure Tanks





ASME B133.2 Procurement Standard for Gas Turbine Maintenance & Safety ASME B133.3 Procurement Standard for Gas Turbine Auxiliary Equipment ASME B133.7M Gas Turbine Fuels ASME B133.8 Gas Turbine Installation Sound Emissions ASME B133.9 Measurement of Exhaust Emissions from Stationary Gas Turbine Engines ASME B15 .1 Safety Standard for Mechanical Power Transmission Apparatus ASME B16 Fittings, flanges and gas valves (eg: AMSE B16.34 - Control valves?) ASME B17 Keys & Keyseats ASME B18 Fasteners (Rivets, nuts, bolts, etc) ASME B19 Safety Standard for Air Compressor Systems & Compressors for Process Ind ASME B20 Safety Standard for Conveyors & Related Equipment ASME B27 Retaining Rings ASME B29 "Chains & Sprockets" etc ASME B30 Lifting Devices ASME B31 Codes for Pressure Piping ASME B31.1 Power Piping (Power Boilers & Auxiliaries >15 psig, or, water >160 psig or ASME B31.11 Slurry Transportation Piping Systems ASME B31.2 Fuel Gas Piping

ASME B31.3 Process Piping (was previously called Petroleum Refinery Piping) ASME B31.4 Pipline Transportation Systems for Liquid Hydrocarbons & Other Liquids ASME B31.5 Refrigeration Piping & Heat Transfer Components ASME B31.6 Chemical Plant ASME B31.7 Nuclear ASME B31.8 Gas Tranmission & Distribution Piping Systems ASME B31.9 Building Services ASME B32 "Wire & Products Other than Pipe" etc ASME B36.10M Welded & Seamless Wrought Steel Pipe ASME B36.19M Stainless Steel Pipe ASME B4 "Tolerances, Limits and Fits" etc ASME B40 "Thermomoters, seals, snubbers, limiter valves" etc ASME B46.1 Surface Texture ASME B47.1 Gage Blanks ASME B5 "Machine Tools" etc ASME B56 "Industrial trucks, forklifts" etc ASME B73.1M Specification for Horizontal End Suction Centrifugal Pumps for Chemical P ASME B73.2M Specification for Vertical In-Line Centrifugal Pumps for Chemical Process ASME B73.3M Specification for Sealless Horizontal End Suction Centrifugal Pumps for C ASME B73.5M Thermoplastic/Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for ASME B89 "General Dimensional Measurement" etc ASME B89 Power Boilers Section (betz video tape) ASME B94 "Dies & Cutting Tools" etc ASME B96.1 Welded Aluminum-Alloy Storage Tanks ASME BPE Bioprocessing Equipment

ASME BPVC Addenda ASME BPVC Code Cases ASME BPVC Interpretations ASME BPVC Sec I Rules for Construction of Power Boilers ASME BPVC Sec II Materials, Parts A,B,C,D ASME BPVC Sec III Subsection NCA, Div 1,2,3 ASME BPVC Sec IV Rules for Construction of Heating Boilers ASME BPVC Sec IX Welding and Brazing Qualifications ASME BPVC Sec V Nondestructive Examination



ASME BPVC Sec VI Recommended Rules for the Care & Operation of Heating Boilers ASME BPVC Sec VII Recommended Rules for the Care & Operation of Power Boilers ASME BPVC Sec VIII Rules for Construction of Pressure Vessels, Div 1,2,3 ASME BPVC Sec X Fiber-Reinforced Plastic Pressure Vessels ASME CSD Manufacturer's Installing Contractor's Reports for ASME ASME CSD-1 Control & Safety Devices for Automatically Fired Boilers ASME FAP "QA Program … Fasteners" etc ASME HPS High Pressure Systems ASME HST Air Chain Hoists, etc ASME MFC "Measurement of Fluid Flow in Pipes", etc (eg: ASME MFC-3M) ASME MH1 "Pallets" ASME N278 Self-Operated and Power-Operated Safety-Related Valves Functional Specif ASME N509 Nuclear Power Plant Air Cleaning Units & Components ASME N510 Testing of Nuclear Air Treatment Systems ASME N626 Qualifications & Duties of Specialized Professional Engineers ASME NOG "Gantry Cranes" ASME NQA "QA for nuclear facilit ies" etc ASME NUM "Cranes, Monorails" etc

ASME OM "Standards, Guides and Code for the Operation & Maintenance of Nuclear Po ASME PALD Safety Standard for Portable Automotive Lifting Devices ASME PTC 1 General Instructions ASME PTC 10 Test Code on Compressors & Exhausters ASME PTC 11 Fans ASME PTC 12.1 Closed Feedwater Heaters ASME PTC 12.2 Steam Surface Condensers ASME PTC 12.3 Deaerators ASME PTC 18 Hydraulic Turbines ASME PTC 18.1 Pumping Mode of Pump/Turbines ASME PTC 19.1 Measurement Uncertainty ASME PTC 19.10 Flue and Exhaust Gas Analysis ASME PTC 19.11 Steam & Water Sampling, Conditioning and Analysis in the Power Cycl ASME PTC 19.2 Pressure Measurement ASME PTC 19.22 Digital Systems Techniques ASME PTC 19.23 Guidance Manual for Model Testing ASME PTC 19.5 Application Part II of Fluid Meters: Interim Supplement to PTC 19.5 on I ASME PTC 19.5.1 Weighing Scales ASME PTC 19.7 Measurement of Shaft Power ASME PTC 19.8 Measurement of Indicated Power ASME PTC 20.1 Speed and Load-Governing Systems for Steam turbine-Generator Units ASME PTC 20.2 Overspeed Trip Systems of Steam Turbine-Generator Units ASME PTC 20.3 Pressure Control Systems Used on Steam Turbine Generator Units ASME PTC 21 Particulate Matter Collection Equipment ASME PTC 22 Performance Test Code on Gas Turbines

ASME PTC 23 Atmospheric Water Cooling Equipment ASME PTC 24 Ejectors ASME PTC 25 Pressure Relief Devices ASME PTC 28 Determining the Properties of Fine Particulate Matter ASME PTC 29 Speed Governing Systems for Hydraulic Turbine Generator Units ASME PTC 3.1 Diesel & Burner Fuels ASME PTC 3.2 Solid Fuels ASME PTC 3.3 Gaseous Fuels ASME PTC 30 Air Cooled Exchangers





HEIISA? S77.14.01 Fossill..ST By Pass SystemsMSS Std Practice SP-25 Standard Marking System for Valves, Fittings, Flanges and U

NACE @ NACE Book of Standards--Hard CopyNACE RP0182-95 Initial Conditioning of Cooling Water EquipmentNACE RP0189-95 On-Line Monitoring of Cooling WatersNACE API RP 1632 Cathodic Protection of Underground Petroleum Storage Tanks and PiNACE MR0175-2001 Sulfide Stress Cracking Resistant Metallic Materials for Oilfield EquiNACE - - -

NACE 8/SSPC-SP 14 Industrial Blast CleaningNACE 7/SSPC VIS 4 Guide and Visual Reference Photographs for Steel Cleaned by WatNACE 9/SSPC VIS 5 Guide and Reference Photographs for Steel Sur faces Prepared by Wet ANACE NACE/SSPC Joint Standards Package (NACE No 1,2,3,4,5,6,8)NACE RP0100-2000 Cathodic Protection of Prestressed Concrete Cylinder PipelinesNACE RP0169-96 Control of External Corrosion on Underground or Submerged Metallic PNACE RP0170-97 Protection of Austenitic Stainless Steels and Other Austenitic Alloys fNACE RP0176-94 Corrosion Control of Steel Fixed Offshore Platforms Associated with P

NACE RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic StNACE RP0181-94 Liquid-Applied Internal Protective Coatings for Oilfield Production EquipNACE RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage TanNACE RP0196-96 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces ofNACE RP0198-98 The Control of Corrosion Under Thermal Insulation and Fireproofing MatNACE RP0273-2001 Handling and Proper Usage of Inhibited Oilfield AcidsNACE RP0288-94 Inspection of Linings on Steel and ConcreteNACE RP0292-98 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control anNACE RP0294-94 Design, Fabrication, and Inspection of Tanks for the Storage of ConceNACE RP0296-2000 Guidelines for Detection, Repair, and Mitigation of Cracking of ExistiNACE RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion ServiceNACE RP0387-99 Metallurgical and Inspection Requirements for Cast Sacrificial AnodesNACE RP0375-99 Wax Coating Systems for Underground Piping SystemsNACE RP0388-95 Impressed Current Cathodic Protection of Internal Submerged SurfacesNACE RP0391-2001 Materials for the Handling and Storage of Concentrated (90 to 100%)NACE RP0392-2001 Recovery and Repassivation After Low pH Excursions in Open RecirNACE RP0394-94 Application, Performance, and Quality Control of Plant-Applied, FusionNACE RP0399-99 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: AppliNACE RP0472-2000 Methods and Controls to Prevent In-Service Environmental CrackingNACE RP0475-98 Selection of Metallic Materials to Be Used in All Phases of Water HanNACE RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventives aNACE RP0497-97 Field Corrosion Evaluation Using Metallic Test SpecimensNACE RP0575-01 Internal Cathodic Protection Systems in Oil-Treating VesselsNACE RP0572-2001 Design, Installation, Operation, and Maintenance of Impressed CurrNACE RP0590-96 Recommended Practice for Prevention, Detection, and Correction of D

NACE RP0775-99 Preparation and Installation of Corrosion Coupons and Interpretation ofNACE SPECIALTY PACKAGE: Sulfide Stress Cracking in Oilfield EquipmentNACE SPECIALTY PACKAGE: Cathodic Protection of Pipelines/TanksNACE SPECIALTY PACKAGE: Corrosion Control of Equipment Used in Offshore OperatiNACE TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product PNACE TM0173-99 Methods for Determining Water Quality for Subsurface Injection UsingNACE TM0194-94 Field Monitoring of Bacterial Growth in Oilfield SystemsNACE TM0197-97 Laboratory Screening Test to Determine the Ability of Scale Inhibitors tNACE TM0198-98 Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloy



NACE TM0199-99 Standard Test Method for Measuring Deposit Mass Loading (DepositNACE TM0286-2001 Cooling Water Test Unit Incorporating Heat Transfer SurfacesNACE TM0374-2001 Laboratory Screening Tests to Determine the Ability of Scale InhibitNACE TM0397-97 Screening Tests for Evaluating the Effectiveness of Gypsum Scale ReNACE TM0399-99 Test Method for Phosphonate in BrineNACE TM0498-98 Standard Test Method for Measuring the Carburization of Alloys for Et

NEMANFPA NFPA 11 Standard on Foam Extinguishing SystemsNFPA NFPA 12 Standard for Carbon Dioxide Extinguishing SystemsNFPA NFPA 13 Standard for the Installation of Sprinkler SystemsNFPA NFPA 14 Standard for the Installtionof Standpipe and Hose SystemsNFPA NFPA 17 Standard for Dry Chemical Extinguishing SystemsNFPA NFPA 20 Standard for the Installation of Centrifugal Fire PumpsNFPA NFPA 22 Standard for the Installatin of Water Tanks for Private Fire Protection

NFPA NFPA 24 Standard for Outside ProtectionNFPA NFPA 58 Standard for the Storage and Handling of Liquefied Petroleum GasesOSHATEMA Standards of Tubular Exchanger Manufacturers Association

ISA Handbook of Control ValvesDow Chemical Gas Conditioning Fact BookNFPA Handbook of Fire ProtectionHandbook of Industrial Loss Prevention, Factory Mutual Engineering Corp

ASME Handbook on Water Technology for Thermal Power systems, 1989Standard Handbook of Power Plant Engineering, 1989

Abbreviations: ASME = American Society of Mechanical Engineers ANSI = American National Standards Institute (w orks w ith over 175 organizations to approve their standa ASTM = American Standard Testing Materials?HEI = Heat Exchange Institute

Standard References and



TEMA = Thermal Exchanger Manufacturers Association? API = American Petroleum InstituteNACE International = National Association of Corrosion Engineers InternationalISA = Instrument Society of America? International Society for Measurement and Control?CSA = Canadian Standards AssociationPTC = Performance Test Code

OSHA = Occupational Safety and Health Administration ASME "Codes and Standards by Designator Code"BPVC = AMSE Boiler & Pressure Vessel Code

ASA = American Standards Association (fittings, plumbing etc) AWWA AWS (American Welding Society) ABSA = Alberta Boilers Safety Association

API 610, 1984 said there exists API 5L specification for line pipe ??? Find out about that...



Comments 2001Cost

ABSA

and Allied Industries

meter proving

cly Ow ned Treatment Works

ir & Alteration Rating and rerating qualificatins required

rvice Piping Systems

old API610 referred to this-w g

Services

stry Servicestry Services,

ceservices, and Gas Indus try Services

mical, and Gas Industry Services



s Industry Services Mag drive and canned pumps

, Part II (Installation) Part II, 1994 - Installation, Part II (Installation) Also, ASME Sec VIII, B &PV Code

Flare Network dP Calcs?

and Refrigerated

Also ASME B31.3 and API 570, not CS

e Seal BonnetsBody Ends

lations at Petroleum Facilitieslations at Petroleum Facilitiesr

particularly flating head andr U-tubes

angers for General Refinery Services

Re electroinic and pneumatic controls

Not a procurment spec

, ,

Prpoerties data for simulations



H2 S Service eactor-Vess el Steels

Heavy Wall Pressure Vessels

Refineries and Petrochemical Plants

Fuels and Fuel Components

eparatorsacilities: A Guidance Documentleum Refinery Operations

ent of Refinery Wastew ater-Phase III

etroleum IndustryPetrochemical Plants

m Industry

ry

roleum Gas (LPG) Storage Facilitiesance for Complying with EPA’se in the Process Industries

urrents

ings, CMA Manager’s Guide

leum Storage Tanks

Atmos pheric Storage Tanks



s in the Petroleum Industry

Information

Maximum achievable control technology

he Petroleum Refining Industryces

ent of Produced Water Toxicity Offshore exploration

Terminal Wastewaterst Terminal Tank Bottoms Contaminants in Surface Waters

ewaters

S Discharge Permits National pllutant discharge elimination system (EPA)

oduced Water from Offshore Oil

& hazards therof, etc)

turer tion



ustries

Also adopted by CSA

50F) US$195

Steam & industrial buildings

US$255X country

Al f luids in chemical plant

CSA Z184

rocess

hemical ProcessChemical Proc ess

Annual additions and revisions ,, -

1998? US$225



Augments BPVC and B31.1

icatoin Standard For application in nuclear pow er plants

Certifications for ow ner, etc

er Plants", etc

le

nstruments and Apparatus

Forced and natural draft cooling tow ers.

US$95.00



ersibles, air locks, etcNuclear

ator Nuclear

Operatorsperators

dustries

Building Construction

the Environment (CCME)

ABSA ABSA

ABSA

s and Ground Storage… ABSA ABSA ABSA

Vehicles ABSA



ions ABSA

iping Systems -- 1996 Editionipment

er Jettingbrasive Blast Cleaning

iping Systemsrom Polythionic Acid Stressetroleum Production

ructures and Corrosion Controlmentk BottomsSteel Water Storage Tankserials--A Systems Approach

d Other Process Equipmenttrated Sulfuric Acid and Oleumng Petroleum Refinery Pressure

for Offshore Applications

of Steel Water Storage Tanks) Sulfuric Acid at Ambientculating Cooling Water Systems-Bonded Epoxy External Pipecation, Performance, andof Carbon Steel Weldments in

dling for Injection into Oil- nd Vapor Corrosion Inhibitors for

nt Deep Groundbedsaerator Cracking

Test Data in Oilfield Operations

onsipelinesMembrane Filters

o Prevent the Precipitation ofs (CRAs) for Stress Corrosion



eight Density) Values for Boiler

rs to Prevent the Precipitationovers

ylene Cracking Furnace Tubes

ABSA

ABSA

rds) (eg: ANSI has approved many API standards)

Handbooks



Documents

Normas y Estandar