NO

N-SPA

RKING

NO

N-M

AGN

ETIC SAFETY

TOO

LSISO 9001:2000

ISO 14001:2004OHSAS 18001:1999

1

2

3

Welcome to the world of Carltsoe Safety Tools.We make your workplace Safer.If you just had the right Tools……….Manufacturing High-quality Non-sparking, Non-magnetic and Non-corrosive Carltsoe Safety Toolssince 1956. With more than 50 years of experience, Carltsoe Safety Tools is the leader of specialCopper Alloy Safety Hand Tools manufactured for use in any high risk area where a spark can create adisaster.

Carltsoe Non-Sparking Safety Tools are recommended for use where hazardous, flammable orcombustible vapors, liquids, dusts or residues are present and should be used by all industrialsafety programs. Carltsoe Non-Sparking Safety Tools are an inexpensive investment for yourcompany.

Carltsoe Non-Magnetic Safety Tools are tested according to NATO specification STANAG 2897 AnnexC, where the magnetic value is measured in Nano Teslar. This enables our Tools to be used aroundsensitive magnetic equipment, including scanners, de-mining, disarming, etc. Our Tools are NATO stocknumbered.

Carltsoe Corrosion Resistant Safety Tools are the ideal choice when working in marine and offshoreenvironments. Corrosion / rust can be extremely dangerous in hazardous environments. Impactsinvolving rust can initiate a thermal reaction which can cause an ignition in an explosive atmosphere.

It is important that the user of Carltsoe Safety Tools keeps the Tools in clean working order. Like otherpersonal protection equipment, is it each user’s duty to inspect the Tools before use.

Carltsoe offers over 3000 individual Tools made from Special Solid Copper-Based Alloyed Tools. Wemanufacture and supply our Carltsoe Safety Tools in two different alloys: Copper-Beryllium Alloy(CuBe2) and a Special Aluminium-Bronze Alloy (AlBr).

International Regulation for Work in Ex or ATEX zones demands the right equipment. Carltsoe Copper-Beryllium Tools (CuBe2) fulfill the demand in the European ATEX directive for work in Zone 0, 1 and 2(Gas, Mists or Vapors). Zones 20, 21 and 22 (Dusts). M1 and M2 for mining.Carltsoe Aluminium-Bronze Tools (AlBr) fulfill the demand in the European ATEX directive for work inZones 1 and 2 (Gas, Mists or Vapors). Zones 21 and 22 (Dusts).

Gas, Mists or VaporsZone 0 — An atmosphere where a mixture of air and flammable substances in the form of gas,vapor or mist is present frequently, continuously or for long periods.Zone 1 — An atmosphere where a mixture of air and flammable substances in the form of gas,vapor or mist is likely to occur in normal operation occasionally.Zone 2 — An atmosphere where a mixture of air and flammable substances in the form of gas,vapor or mist is not likely to occur in normal operation but, if it does occur, will persist for only ashort period.

DustsZone 20 — An atmosphere where a cloud of combustible dust in the air is present frequently,continuously or for long periods.Zone 21 — An atmosphere where a cloud of combustible dust in the air is likely to occur innormal operation occasionally.Zone 22 — An atmosphere where a cloud of combustible dust in the air is not likely to occur innormal operation but, if it does occur, will persist for only a short period.

All Carltsoe Safety Tools are laser engraved according to Ex/ATEX classifications and our own markingprocedure. ATEX guidelines will be provided upon request.

Product liability, quality control, testing and customer service are a priority at Carltsoe.Carltsoe is an ISO9001:2000 certified company, and our Tools are recommended and certified byseveral international organizations such as BVQI, DNV, Force Technologies and the Danish Navy.Carltsoe Safety Tools are continuously spark-proof tested according to our strict test procedure(CST Test).

4

Carltsoe Non-Sparking Safety Tools are recommended for use where hazardous, flammable orcombustible vapors, liquids, dusts or residues are present and should be used by all industrialsafety programs. Carltsoe Non-Sparking Safety Tools are an inexpensive investment for yourcompany.

Industries whom should consider the need ofCarltsoe Safety Tools because of it’sNon-Sparking properties:

Manufacturing Industries:Alcohol IndustriesAmmunition, Missile & Explosives PlantsAutomotive PlantsBreweries & DistilleriesChemical ManufacturingFlammable Materials ManufacturingFlour MillsFurniture Manufacturers (Varnish and Painting)Gas PlantsGlue FactoriesInk IndustriesLiquefied Petroleum Gases (LPG)MiningNuclear ProductsOil & Natural Gas Drilling, Refining & HandlingPaint, Lacquer & Varnish ProductsPaper and Pulp MillsPetrochemicalsPetroleum RefiningPharmaceutical IndustriesPipeline Construction & MaintenancePlastic ManufacturingSugar MillsSynthetic Fiber ManufacturingWine Industries

Transportation Industries and their Maintenance,Cleaning & Service Companies:

AirportsRailroadsShipyardsTankersTanker TrucksVesselsWorkboats

Governmental Agencies:Aircraft and Missile PlantsAirport (Refueling & Maintenance Operations)Armed Forces (Army, Navy, Air Force, Marine,Cost Guard & Civil Support Units)Chemical, Biological, Radiological,Nuclear or Explosives LogisticalSupport Operational Equipment.Fire Departments, Military BasesFirst Responders to Weapons of Mass Destruction,Firefighters, Public Safety Bomb Squads &Local Rescue SquadsHazardous Materials Handling & Clean-UpMunitions DepotsNuclear Production and WastePublic Utilities: Gas, Electric & TelecommunicationWaste ManagementWater Treatment Facilities

Other Industries:Cleaning & Spraying OperationsConfined Space MaintenanceExplosive & PyrotechnicsGeophysical ExplorationGrain Storage & HandlingHazardous Material HandlingMaintenance & Service OperationsPaint Spraying, Finishing and Booth OperationsPacking PlantsPropane Distributors & Bulk PlantsWarehousing of all Hazardous Materials

Industries whom should consider the need ofCarltsoe Safety Tools because of it’sNon-Magnetic properties:

Aircraft Maintenance & OverhaulAluminium & Other Metal SmeltingElectronics ManufacturersHospitals & Clinics Magnetic Resonance ImagingMRI- MaintenanceMine SweepersNuclear Products & Testing MachinesPrecision Magnetic EquipmentPublic Utilities: Gas, Electric & TeleRadar Transmission Centers

Industries whom should consider the need ofCarltsoe Safety Tools because of it’sCorrosion Resistant properties:

Boat OwnersChemical ManufacturingDesalinization PlantsFood product ManufacturingLaboratoriesPaper & Pulp MillsPetrochemicalsPharmaceutical IndustryPlastic ManufacturingShipyardsTankers, Vessels & Other Work BoatsWine Industry

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

Advanced forging technology ensures all of our products

Cleaning the furnace

Checking the furnace

Lighting Sealing the openingof the furnace

Blowing

Burden

Prefabricating

Remolding precisely

Testing

The liquid forging technology procedures are:

7

Files, Scissors, SawHalf Round FileRound FileHand FileTinner's Snip Plate ShearScissorsScissors

KnifeKnifeKnifePutty Knife

Hand SawHack Saw Frame

Hack Saw Blade

ShovelsScoopShovelShovel, Round PointEdging Spade

BrushesBrush

BrushWheel BrushCup Brush

Clamps andAdditional Tools

Tweezers, Standard TypeTweezers, Sharp Type"G" Clamp Earthing Clamp

Marking ToolCaulking ToolCaulking ToolCrowbarWrecking BarScraper, Pick and ScalersCarbide Drum Opener

WedgeAngle Tracing PointTri SquareRulerRakeForkHoe

PickBucketShacklePipe CutterChain Hoist

Toolkit

MENU

8

WrenchesAdjustable End WrenchRatchet WrenchAdjustable Hook SpannerHook SpannerWrench, Striking Open EndWrench, Striking BoxWrench, Single End Box

Double Open End WrenchSingle Open End Wrench

Double Box End Wrench, Straight Type

Box Wrench For ExtensionExtension For Box WrenchCombination Wrench

Valve Wheel HookValve SpannerValve Spanner, Special

Gas Tube SpannerBung WrenchBung WrenchBung WrenchBung Wrench, Universal

PliersAdjustable Pipe WrenchChain Pipe WrenchPipe Pliers, Swedish TypeWater Pump PliersLineman's Pliers, Side CuttingDiagonal Cutting PliersDiagonal Cutting Pliers, Heavy DutyLong Nose PliersRound Nose PliersFlat Nose PliersCombination Pliers, Slip JointPincersPipe PliersParallel Vice

HammersBall Peen HammerCross Peen HammerDouble Face Machinist's HammerMachinist's HammerSledge HammerSledge Hammer, German Type

Scaling Hammer

Stone WedgeBricklayer's HammerClaw HammerPlastic HammerOrate OpenerAxe

Hatchet

PunchesCenter PunchCylindrical DriftDrift Pin, Straight TypePin Punch

ChiselsFlat ChiselCross Cutting Chisel

Point Chisel - 6 PointBull Point

Sockets andAccessories

Socket 1/2 "ConverterUniversal JointExtension Bar

Speed HandleSliding Tee

Hinged HandleRatchet SpannerRatchet Spanner

ScrewdriversHexagonal Head WrenchLong Arm Hex. Key, Ball EndFlat Type ScrewdriverCross Slot Screwdriver

Wrench - Socket "L"Wrench - Socket "T"

ScrapersFlat ScraperAngle ScraperAngle ScraperHoe ScraperDeck ScraperLong Blade ScraperTriangular ScraperPlate Scraper

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

Carltsoe Round Corner ShapeAll Box/Ring Ended Carltsoe Tools,are manufactured with Carltsoe’s Round Corner.Carltsoe’s Round Corner design prevents damage to the bolt head.Very high tensile strength due to the design of the Carltsoe Round Corner.

7

Ex208S

Ex501 6"8"10"12"15"18"24"

Ex501-6Ex501-8Ex501-10Ex501-12Ex501-15Ex501-18Ex501-24

Adjustable End Wrench

No. Lmm L" Be Al

155205255305380455605

130225356657139221653939

112217342593125318623384

Ex504Ratchet Wrench

Ex504-9Ex504-11Ex504-13Ex504-14Ex504-17Ex504-19Ex504-22Ex504-24Ex504-27Ex504-30Ex504-32Ex504-36Ex504-41

No. S L B H Be Al

9111314171922242730323641

155215215215215260260260260390390505505

30333536394244485055586267

68810101212141415151616

1664193021182487277630693294349840904470500152745587

1430165818202137238526372830300535143840429745314800

Adjustable Hook Spanner200538780

No. L B A H Be Al

Ex208S-32/75Ex208S-50/120Ex208S-115/170

32/7550/120115/170

205285310

610.514.9

34.57

101420

172462670

Adjustable EndW

renchRatchetW

renchAdjustable H

ook Spanner

L

S

L

H

B S

L

H

B A

8

Ex208

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

9

L

H

B A

24 34 64 87 146 163 174 264 331 353 512 577 684 738 782 849 870

Hook Spanner

No. L B A H Be Al

Ex208-12/14Ex208-16/20Ex208-25/28Ex208-30/32Ex208-34/36Ex208-40/42Ex208-45/50Ex208-52/55Ex208-58/62Ex208-68/75Ex208-80/90Ex208-90/100Ex208-95/100Ex208-100/110Ex208-110/115Ex208-120/130Ex208-135/145

12/1416/2025/2830/3234/3640/4245/5052/5558/6268/7580/9090/10095/100100/110110/115120/130135/145

105108130168168180205205235255280305305330330340350

4.615.627.196.786.728.7911.3711.8712.9312.9812.0412.5815.2712.6219.0320.0818.24

23455556688101010121212

666778881013991010788

28 40 74 101 170 190 202 307 392 412 596 671 796 859 910 988 1012

Ex200 No. L B H Be AlEx200-17Ex200-19Ex200-22Ex200-24Ex200-27Ex200-30Ex200-32Ex200-36Ex200-41Ex200-46Ex200-50Ex200-55Ex200-60Ex200-65Ex200-70

Wrench, Striking Open End171922242730323641465055606570

140140150160180190195210225255280310320350375

374249535866687890100110120130141151

151517171718182020222225252830

3003454004626847307769041584187620452564342944006835

34940146653879685090310521844218423802984399151537956

L

H

SB 15

DIN 133

AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZE IN METRICAND INCH.

Ex201B

10

No. L D H Be Al

Wrench, Striking BoxEx201B-27Ex201B-30Ex201B-32Ex201B-36Ex201B-41Ex201B-46Ex201B-50Ex201B-55Ex201B-60Ex201B-65Ex201B-70Ex201B-75Ex201B-80Ex201B-85Ex201B-90Ex201B-95Ex201B-100

27303236414650556065707580859095100

180190195205225240250270270290320335345365400400400

475454606675808894101110117123131152152152

1718182022242526282933343537424242

3175185456031115119412421291143817112456318940864907573961696227

272445468518958102610671109123514702118274035104216493053005350

Ex201 No. L D H Be Al

Wrench, Single End BoxEx201-27Ex201-30Ex201-32Ex201-36Ex201-41Ex201-46Ex201-50Ex201-52Ex201-55Ex201-56Ex201-57Ex201-60Ex201-65Ex201-67Ex201-70Ex201-75Ex201-80

2730323641465052555657606567707580

210210210225240255265280280280290290315315330340360

4451515560667178787885859393100105118

12131314151616.517171717.517.518.518.5192020.5

209321396680860105112481309134813901403147715281612165524602819

18027637358080090310721124115811971205127813131385142221142422

L

D S

H

Wrench,Striking

BoxW

rench, Single End Box

DIN 7444

Hook Spanner

Wrench,Striking O

pen End

L

D S

H

AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

Ex201F

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

11

No. L D H Be Al

Ex205 No. L B H Be Al

Single Open End Wrench

Ex201F-27Ex201F-30Ex201F-32Ex201F-36Ex201F-41Ex201F-46Ex201F-50Ex201F-55Ex201F-60Ex201F-65

27303236414650556065

155155155170185210210220225230

43475056647177808590

20.720.722.624.626.627.628.83031.533

4555207611066131118382596334541271948

391447654916112615792230287435464251

Ex205-6Ex205-7Ex205-8Ex205-9Ex205-10Ex205-11Ex205-14Ex205-17Ex205-19Ex205-22Ex205-24Ex205-27Ex205-30Ex205-32Ex205-36Ex205-41Ex205-46Ex205-50Ex205-55Ex205-60Ex205-65

67891011141719222427303236414650556065

9090110110110115125140170195195230235290305340360380400430460

20212123.524.527.533404449.5516165.569788597103114125132

4555555.567899.810.911.812.813.81515.816.817.718.7

293539495872811001081563003113784456407459161133145019091969

253034425062708693134258267325382550640787974124616401692

L

H

SB 15O

L

D S

H

AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

12

No. L B1 B2 H Be AlEx203Double Open End Wrench

Ex203-67Ex203-68Ex203-78Ex203-79Ex203-89Ex203-810Ex203-910Ex203-911Ex203-1011Ex203-1012Ex203-1013Ex203-1014Ex203-1114Ex203-1213Ex203-1214Ex203-1315Ex203-1417Ex203-1617Ex203-1618Ex203-1719Ex203-1819Ex203-1722Ex203-1922Ex203-2022Ex203-1924Ex203-2123Ex203-2224Ex203-2227Ex203-2426Ex203-2427Ex203-2528Ex203-2730Ex203-2732Ex203-3032Ex203-3036Ex203-3236Ex203-3436Ex203-4146

6 x 76 x 87 x 87 x 98 x 98 x 109 x 109 x 1110 x 1110 x 1210 x 1310 x 1411 x 1412 x 1312 x 1413 x 1514 x 1716 x 1716 x 1817 x 1918 x 1917 x 2219 x 2220 x 2219 x 2421 x 2322 x 2422 x 2724 x 2624 x 2725 x 2827 x 3027 x 3230 x 3230 x 3632 x 3634 x 3641 x 46

122122140140140140140157157157172172172172172190205205205222222236236236250250250260260260280302302302328328328400

17.517.518.518.521.521.521.524.524.524.524.529292929333336.536.539.539.544444449.549.549.554.554.554.5565965.565.569697385

18.518.521.521.524.524.524.529292931.53333333335.539.541.541.5444449.549.549.554.554.554.56161616165.5696977777797

3.73.7444444.54.54.5555555.56666.56.57777.57.57.58888.59999.49.49.410.7

272834354445467071728717317417517628032341341444544657157257367567667775375475576978285385478595710231478

23242930383940606162751481491501512412773553563823834904914925805815826476486496616717337347828228791270

H

LB1 S1 15O

B2S2

DIN 3110

Double O

pen EndW

rench

AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

13

No. L D1 D2 H Be AlEx202S Ex202S-5.57Ex202S-67Ex202S-78Ex202S-89Ex202S-810Ex202S-911Ex202S-1011Ex202S-1012Ex202S-1113Ex202S-1213Ex202S-1214Ex202S-1314Ex202S-1415Ex202S-1317Ex202S-1417Ex202S-1617Ex202S-1719Ex202S-1819Ex202S-1922Ex202S-2022Ex202S-2123Ex202S-1924Ex202S-2224Ex202S-2427Ex202S-2528Ex202S-2430Ex202S-2730Ex202S-3032Ex202S-3036Ex202S-3236Ex202S-3641Ex202S-3841Ex202S-4146Ex202S-4650

5.5 x 76 x 77 x 88 x 98 x 109 x 1110 x 1110 x 1211 x 1312 x 1312 x 1413 x 1414 x 1513 x 1714 x 1716 x 1717 x 1918 x 1919 x 2220 x 2221 x 2319 x 2422 x 2424 x 2725 x 2824 x 3027 x 3030 x 3230 x 3632 x 3636 x 4138 x 4141 x 4646 x 50

140140150150150170170170190190190190210210210240240240255255280280280310325325325325350350390390435475

13131616161818182121212124242428282831313535354042424247505059596471

14141818182020202424242428282831313135353838384446464650505664647177

77888999910101013131314141415151616161819191920202224252527

26404958636772871011101261561892132412512653053634174684985149225816008108228499851144135514011613

22344250545862758795108134162183207216228262312359402428442792499516696706729846983116412041386

L

S1D1 S2 D2

H

H

AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

14

No. L D1 D2 H1 H2 Be AlEx202F Ex202F-67Ex202F-89Ex202F-810Ex202F-911Ex202F-1011Ex202F-1012Ex202F-1114Ex202F-1213Ex202F-1214Ex202F-1314Ex202F-1315Ex202F-1415Ex202F-1417Ex202F-1617Ex202F-1618Ex202F-1719Ex202F-1819Ex202F-1922Ex202F-1924Ex202F-2022Ex202F-2123Ex202F-2224Ex202F-2227Ex202F-2426Ex202F-2427Ex202F-2430Ex202F-2528Ex202F-2729Ex202F-2730Ex202F-2732Ex202F-3032Ex202F-3036Ex202F-3236Ex202F-3641

6 x 78 x 98 x 109 x 1110 x 1110 x 1211 x 1412 x 1312 x 1413 x 1413 x 1514 x 1514 x 1716 x 1716 x 1817 x 1918 x 1919 x 2219 x 2420 x 2221 x 2322 x 2422 x 2724 x 2624 x 2724 x 3025 x 2827 x 2927 x 3027 x 3230 x 3230 x 3632 x 3636 x 41

170180195195195210210210210225225225245245265265265285305285305305325325325345345370370370370400400440

12141717172121212124242426262828283334333436393939394143434348515157

13161919192222222225252528283131313637363739434343484445485151575764

67.28.58.58.59.59.59.59.510.810.810.811.811.812.512.512.513.51413.51414.5151515151516161617181820

6.889.59.59.510.510.510.510.511.511.511.512.512.513.213.213.214.514.514.514.5151616161716.517171818202021

4047566193100102109114131138161211236255285304323359399498505527543554558567580597614642744803877

344148528086889498113119138145157161176184206251292334352371394427451483510534549576640690754

H1

H2

S2 D2S1D1LDIN 838

AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

15

L

H

D S

L

H

SD

h1

Ex204S No. L D H Be Al

Ex204S-22Ex204S-24Ex204S-27Ex204S-30Ex204S-32Ex204S-36Ex204S-38Ex204S-41Ex204S-44Ex204S-46Ex204S-50

2224273032363841444650

355355405405405455455455505505555

3740434852586164677178

1516171819202122232426

26032535952367098911021182134615221687

2242793084495768509471016115613081449

Ex215No. L D H h1 Be Al

Ex215-30Ex215-32Ex215-33Ex215-34Ex215-35Ex215-36Ex215-37Ex215-38Ex215-41Ex215-42Ex215-46Ex215-47Ex215-50

30323334353637384142464750

200235235235245245250250265265280280290

47515151545456566262696976

34343434353537373939404042

19191919202021212222232325

9439679861003101710351076114812601440161016831767

81083184786287488992498610831237138314461518

Box Wrench For Extension

Ex216 No. L 1 Brass

Ex216-22Ex216-25Ex216-30

600750850

263035.8

222530

757 1339 2307Extension For Box Wrench

AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

2

Ex207F No. L1 L2 Be Al

16

No. L B D H1 H2 S Be AlEx206 Ex206-6Ex206-7Ex206-8Ex206-9Ex206-10Ex206-11Ex206-12Ex206-13Ex206-14Ex206-15Ex206-16Ex206-17Ex206-18Ex206-19Ex206-20Ex206-21Ex206-22Ex206-24Ex206-25Ex206-26Ex206-27Ex206-28Ex206-29Ex206-30Ex206-32Ex206-36Ex206-38Ex206-41Ex206-42Ex206-46Ex206-50Ex206-55Ex206-60Ex206-65Ex206-70

678910111213141516171819202122242526272829303236384142465055606570

100110120130140150160170180190200210220230240252262282330330330320330340380460460475475500550570570570570

17.218.520.823242728.5313335.536.539.541.54445.54749.554.56262626165.565.5697784888896105114122132142

10.51314161719212224252628303133343639414141444548515759636370768492102112

44455556666777891011138.28.58.88.899.510.5151717181920222323

67789991010111112121213131416181515.51616.5171820242626283031333434

2733374454711001281391581622062112584204274435105285776206417448709591160134515271754207722432631287530383312

24293238466186109121136139170182224361367381438454496533551639748824997115613121507178519272261247026102846

Combination Wrench

L

SB

S D

H1 h2

15O

Combination

Wrench

ValveW

heel Hook

L1S

L2

Ex207F-30300Ex207F-40400Ex207F-50500Ex207F-60600Ex207F-70700Ex207F-80800

304050607080

300400500600700800

4356698295108

58210121220157818312176

5008761048135615731870

Valve Wheel Hook

DIN 3113

AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.

Ex207 No. L1 L2 Be Al

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

17

L1S

L2

Valve SpannerEx207-32Ex207-36Ex207-41Ex207-50

32364150

250272300320

515355.560

535 751 919 1130

460645790971

Ex212 No. L Be Al

Gas Tube SpannerEx212-51Ex212-76

5176

540590

15472056

13291766

Ex207S No. L Be Al

Valve Spanner, SpecialEx207S-76178Ex207S-203381Ex207S-406508

76/178203/381406/508

215400490

4588601745

3937391499

Ex110No. L Be Al

Ex110ESNo. L Be Al

Ex213

Ex110SNo. Be Al

No. S L1 L2 Be Al

18

Ex110-395 395 2077 1785

Ex110ES-385 385 776 667

Ex110S-385 385 1817 1561

L1

L2

S

Bung Wrench

Bung Wrench

Bung WrenchEx213-22Ex213-24Ex213-27Ex213-32

22242732

255255310310

708090100

1048116422112677

900100019002300

Bung Wrench, Universal

Valve SpannerValve Spanner, Special

GasTube Spanner

BungW

renchBung

Wrench

BungW

renchBung

Wrench, U

niversal

L

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndAd

ditio

nalT

ools

Tool

kit

19

Ergonomic HandlesErgonomic two-component handle on all Carltsoe Pliers.Maximum Handgrip prevents slipping.Unique handle design for Safety Tools.

20

Ex502 No. Lmm L Be Al

Ex502-8Ex502-10Ex502-12Ex502-14Ex502-18Ex502-24Ex502-36Ex502-48

2002503003504506009001200

436897.5128415382571407648505461

5051047146617502993475756456356

8"10"12"14"18"24"36"48"

Adjustable Pipe Wrench

Ex600Chain Pipe Wrench

Ex600-50 600 50 989 850Ex600-100 600 100 1599 1374Ex600-150 600 150 2158 1854

No. L Be Al

Ex505Pipe Pliers, Swedish Type

Ex505-1.5 1-1/2" 420 1650 1418Ex505-2 2" 550 3282 2860

No. S Be Al

Ex604 Ex604-10 250 10" 368 316Ex604-12 300 12" 718 617Water Pump Pliers

No. Lmm L Be Al

AdjustablePipe

Wrench

ChainPipe

Wrench

PipePliers,Sw

edishType

WaterPum

pPliers

L

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

21

Ex612-6 150 6" 250 215Ex612-8 200 8" 396 340

Ex612Lineman's Pliers, Side Cutting

No. Lmm L Be Al

Ex601-6 160 6" 278 239Ex601No. Lmm L Be Al

Diagonal Cutting Pliers

Ex601SNo. Lmm L Be Al

Diagonal Cutting Pliers, Heavy DutyEx601S-7 185 7" 189 162

Ex611-7 180 7" 196 168Ex611No. Lmm L Be Al

Long Nose Pliers

Ex607 No. Lmm L Be AlEx607-6 150 6" 136 116

Round Nose Pliers

Ex601-8 200 8" 378 339

22

Ex606No. Lmm L Be Al

Ex605No. Lmm L Be Al

Ex603No. Lmm L Be Al

Ex602No. Lmm L Be Al

Ex902No. S Al

Flat Nose PliersEx606-6 150 6" 169 145

Pincers

Ex605-8 200 8" 258 228

Combination Pliers, Slip Joint

Ex603-7 180 7" 455 391

Pipe PliersEx602-8 210 8" 422 408

Ex902-4 4" 1273Ex902-5 5" 1652Parallel Vice

Flat Nose Pliers

Combination

Pliers, Slip JointPincersPipe

PliersParallelVice

Lineman's

Pliers, Side CuttingD

iagonalCuttingPliers

DiagonalCutting

Pliers, Heavy

Duty

Long Nose Pliers

Round Nose Pliers

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

23

Carltsoe Striking ToolsFiberglass Handle or Wood Handle / Your choice.Drop Forging ensures a long life time.

24

Ex101Ball Peen Hammer

No. Ex101-0200 Ex101-0500 Ex101-0700 Ex101-0900

200 500 700 900

Ex102Cross Peen Hammer

No. Ex102-0500 Ex102-0900

500 900

Ex103Double Face Machinist's Hammer

No. Ex103-0300 Ex103-0500 Ex103-0900

300 500 900

Ex1041 No. Ex1041-0100 Ex1041-0200 Ex1041-0300 Ex1041-0500 Ex1041-0800

100 200 300 500 800Machinist's Hammer

Ex104 No. Ex104-0500 Ex104-1000 Ex104-1500 Ex104-2000 Ex104-2500

500 1000 1500 2000 2500

No. Ex104-3000 Ex104-4000 Ex104-5000 Ex104-8000 Ex104-10000

3000 4000 5000 8000 10000

Sledge Hammer

BallPeen Ham

mer

CrossPeen H

amm

erD

oubleFace

Machinist's H

amm

erM

achinist's Ham

mer

Sledge Ham

mer

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

25

Ex112

Ex105

Ex106

Ex107

Scaling Hammer

Stone Wedge

Bricklayer's Hammer

No. Ex105-1300 Ex105-2100

1300 2100

No. Ex106-0200 Ex106-0400 Ex106-0600 Ex106-0900

200 400 600 900

No. Ex107-1000

1000

No. Ex112-0600 Ex112-0800

600 800

Ex6475Sledge Hammer,German Type

No. Ex6475-0500 Ex6475-1000 Ex6475-1500 Ex6475-2000 Ex6475-3000

500 1000 1500 2000 3000

No. Ex6475-4000 Ex6475-5000 Ex6475-6000 Ex6475-7000 Ex6475-8000

4000 5000 6000 7000 8000

No. L Be Al

No. L Be Al

No. L Be Al

26

Ex122Claw Hammer

Ex121Plastic Hammer

Ex114SOrate Opener

Ex1201Axe

Ex1202Hatchet

No. Ex122-0500 Ex122-0700

500 700

No. Ex121-0800

800

Ex114S-230 230 524 450

Ex1201-100 100 1658 1424

Ex1202-85 85 1111 955

Claw H

amm

erPlastic H

amm

erO

rate Opener

Axe

Hatchet

Ex301C

Ex301O

Ex301

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

27

Ex301O-10 10 110 4 46 40Ex301O-12 12 115 6 100 86Ex301O-14A 14 120 7 136 117Ex301O-14B 14 120 8 207 178Ex301O-16 16 145 10 239 205Ex301O-18 18 160 12 283 243Ex301O-20 20 180 14 334 287Ex301O-24 24 200 16 385 331Ex301O-30 30 225 18 442 380Ex301O-32 32 225 20 533 458Ex301O-40 40 250 32 604 519

No. L Be Al

Ex301-10 100 10 50 43Ex301-12 150 12 74 64Center Punch

Cylindrical Drift

No. S L Be Al

Ex301C-2 2 150 10 42 36Ex301C-3 3 150 10 51 44Ex301C-4 4 150 10 68 58Ex301C-5 5 150 10 74 64Ex301C-6 6 150 10 94 81Ex301C-7 7 150 12 113 97Ex301C-8 8 150 12 147 126Ex301C-9 9 150 14 191 164Ex301C-10 10 150 14 223 192Ex301C-11 11 150 16 267 229Ex301C-12 12 150 16 279 240Ex301C-13 13 150 18 331 285Ex301C-14 14 150 18 362 311Ex301C-15 15 200 20 404 347Ex301C-16 16 200 20 449 386Ex301C-17 17 200 22 505 434Ex301C-18 18 200 22 550 473Ex301C-19 19 250 24 590 507Ex301C-20 20 250 24 715 614Ex301C-21 21 250 26 804 691Ex301C-22 22 250 26 975 838

No. S L Be Al

Drift Pin, Straight Type

L

L

S

L

S

28

Ex304 No. A L H Be Al

Ex304-150 22 150 12 334 287Ex304-200 22 200 12 383 360Ex304-250 24 250 12 629 540Ex304-400 27 400 13 1005 863

Flat Chisel

Ex305 No. L Be Al

Cross Cutting ChiselEx305-150 150 213 183Ex305-200 200 294 253Ex305-300 300 733 630

Ex309Diamont Chisel

No. L Be Al

Ex309-200 200 10 473 407Ex309-250 250 11 543 466Ex309-300 300 12 1206 882Ex309-400 400 13 1231 1058

Ex306Bull Point

No. L Be AlEx306-200 200 10 256 220Ex306-250 250 12 430 370Ex306-300 300 14 563 484Ex306-400 400 16 839 721

PinPunch

Flat ChiselCross

Cutting ChiselPoint Chisel - 6 PointBullPoint

CenterPunchCylindrical D

riftD

riftPin,StraightType

Ex301P Ex301P-1.4 1.4 110 10 24 21Ex301P-1.8 1.8 110 10 44 38Ex301P-2.4 2.4 110 10 60 50Ex301P-2.8 2.8 110 10 73 63Ex301P-3 3 110 10 94 81Ex301P-4 4 120 10 125 107Ex301P-5 5 130 12 164 141Ex301P-6 6 140 12 218 187Ex301P-8 8 150 14 283 243

No. S L Be Al

Pin Punch

L

S

L

A

H

L

L

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

29

Carltsoe Sockets are manufactured with a Round Corner.Drop forged for high strength.Designed according to DIN Standard.

Ex1503B

Ex1509

No. L D1 D2 t Be Al

No. S Be Al

30

Ex1503B-7 7 38 12.5 23 18.5 75 64Ex1503B-8 8 38 13 23 18.5 77 66Ex1503B-9 9 38 14.3 23 18.5 79 68Ex1503B-10 10 38 15.5 23 18.5 79 68Ex1503B-11 11 38 16.7 23 18.5 79 68Ex1503B-12 12 38 18 23 18.5 80 69Ex1503B-13 13 38 19.2 23 18.5 76 66Ex1503B-14 14 38 20.5 23 18.5 79 68Ex1503B-15 15 38 21.7 23 18.5 84 72Ex1503B-16 16 38 23 23 18.5 87 75Ex1503B-17 17 38 25 25 18.5 102 88Ex1503B-18 18 38 26 26 18.5 114 98Ex1503B-19 19 38 27 27 18.5 111 95Ex1503B-20 20 38 28.2 24 19.5 102 88Ex1503B-21 21 38 29.2 24 19.5 114 98Ex1503B-22 22 38 30.5 25 19.5 126 108Ex1503B-23 23 38 25 32.2 19.5 132 113Ex1503B-24 24 38 26 33 19.5 140 120Ex1503B-26 26 38 28 35.7 19.5 163 140Ex1503B-27 27 40 29 36.7 24 178 153Ex1503B-28 28 40 30 38.2 24 210 180Ex1503B-30 30 40 31 40.5 24 213 183Ex1503B-32 32 40 32 43 24 234 200

Ex1509-1234 1/2"-3/4" 193 166Ex1509-3412 3/4"-1/2" 193 166Ex1509-341 3/4"-1" 298 256Ex1509-134 1"-3/4" 298 256Ex1509-1112 1"--1-1/2" 475 408Ex1509-1121 1-1/2"--1" 475 408

Converter

Socket 1/2 "Converter

Socket 1/2 "

AVAILABLE WITH1/4” - 1/2” - 3/4” - 1” DRIVEAS WELL AS IMPACT

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

31

Ex1507 No. S Be Al

Universal JointEx1507-12 1/2" 405 340Ex1507-34 3/4" 605 520Ex1507-1 1" 1377 1183

Ex1504No. S L Be Al

Ex1504B-100 1/2" 100 201 173Ex1504B-200 1/2" 200 420 362Ex1504B-250 1/2" 250 570 489Ex1504C-100 3/4" 100 217 186Ex1504C-200 3/4" 200 403 346Ex1504C-250 3/4" 250 563 484Ex1504D-100 1" 100 437 375Ex1504D-250 1" 250 871 748

Extension Bar

Ex1508 No. S Be Al

Ex1508B 1/2" 419 360Ex1508C 3/4" 938 806Ex1508D 1" 1226 1054

Ex1505 No. S L Be Al

Ex1505B 1/2" 380 525 451Ex1505C 3/4" 380 930 799Ex1505D 1" 380 1132 973Speed Handle

32

Ex1502No. S L Be Al

Sliding TeeEx1502BS 1/2" 260 360 310Ex1502B 1/2" 320 500 430Ex1502CS 3/4" 260 920 790Ex1506C 3/4" 450 1638 1407Ex1506D 1" 300 2271 1951

Ex1506Hinged Handle

Ex1506BS 1/2" 275 563 484Ex1506B 1/2" 380 990 851Ex1506C 3/4" 380 1197 1029Ex1506D 1" 380 1522 1308

No. S L Be Al

Ex1501SRatchet Spanner

Ex1501SB 1/2" 260 617 530Ex1501SC 3/4" 390 1467 1260

No. S L Be Al

Ex1501 Ex1501A 1/4" 150 332 285Ex1501B 1/2" 260 427 367Ex1501C 3/4" 390 667 573Ex1501D 1" 510 1001 860

Ratchet Spanner

No. S L Be Al

SlidingTee

Hinged H

andleRatchet SpannerRatchet Spanner

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

33

Ergonomic HandlesErgonomic two-component handle on all Carltsoe Screwdrivers.Maximum Handgrip prevents slipping.Unique design for Safety Tools.

34

Ex209-1.5 1.5Ex209-2 2Ex209-2.5 2.5Ex209-3 3Ex209-4 4 70 120 25 14 12Ex209-5 5 80 130 28 20 18Ex209-6 6 90 145 32 39 33Ex209-7 7 95 155 34 47 41Ex209-8 8 100 160 36 68 59Ex209-9 9 106 175 38 84 72Ex209-10 10 112 182 40 110 95Ex209-11 11 118 188 42 148 127Ex209-12 12 125 200 45 184 158Ex209-14 14 140 230 56 289 248Ex209-17 17 160 250 63 477 410Ex209-19 19 180 280 70 654 562Ex209-22 22 200 300 80 1092 938Ex209-24 24 224 330 90 1354 1163Ex209-27 27 250 350 100 1908 1639Ex209-30 30 275 370 110 2479 2130Ex209-32 32 315 390 125 3011 2587Ex209-36 36 355 440 140 3689 3169

Ex209

Ex209L Ex209L-3 3 63 110 20 12 10Ex209L-4 4 70 120 25 26 22Ex209L-5 5 80 130 28 42 36Ex209L-6 6 90 145 32 63 54Ex209L-7 7 95 155 34 112 96Ex209L-8 8 100 160 36 144 124Ex209L-10 10 112 182 40 170 146Ex209L-11 11 118 188 42 338 290

No. L LL H Be Al

No. L LL H Be Al

Hexagonal Head Wrench

Hexagonal H

eadW

renchLong

Arm

Hex. Key, Ball End

Long Arm Hex. Key,Ball End

Ex801Flat Type Screwdriver

Ex803

Ex802

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

35

No. A Be

No. A Be

No. S Be

Ex801-350 3 50Ex801-4100 4 100Ex801-4150 4 150Ex801-6100 6 100Ex801-8150 8 150Ex801-10200 10 200Ex801-10300 10 300

Cross Slot ScrewdriverEx803-0 0 60 3 39Ex803-1 1 80 5 48Ex803-2 2 100 6 58Ex803-3 3 150 8 141Ex803-4 4 200 10 194

Ex802-4 4.0 12.5 1397

DIN 5262

Ex702-9 9 170 198 170Ex702-11 11 170 360 310Ex702-14 14 170 430 370Ex702-17 17 230 483 415Ex702-19 19 230 549 472Ex702-22 22 260 587 505Ex702-24 24 260 636 546Ex702-27 27 260 718 617

Ex702 No. S Be Al

Wrench - Socket "T"

36

Ex701No. S L1 L2 D Be Al

Wrench - Socket "L"

Wrench - Socket "L"

Wrench - Socket"T"

Ex701-8 8 107 37 14 110 95Ex701-9 9 107 37 16 126 108Ex701-11 11 116 37 18 161 138Ex701-14 14 116 37 22 180 155Ex701-17 17 211 52 26 316 271Ex701-19 19 211 52 28 336 289Ex701-22 22 211 57 32 372 320Ex701-24 24 240 57 35 421 362Ex701-27 27 240 57 39 482 414

L1

L2

D

L

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

37

Special Designs are made upon customer demand.

You don't see it.......we will make it

38

Ex401

Ex402

Ex402B

Ex407B

Flat Scraper

FlatScraperAngle

ScraperAngle

ScraperHoe

Scraper

Ex401-18 18 300 7 404 347Ex401-30 30 300 7 539 463

No. A L H Be Al

No. A L1 L2 Be Al

No. A L1 L2 Be Al

No. A L Be Al

Angle Scraper

Angle Scraper

Ex402-25 25 300 45 423 364

Hoe Scraper

Ex402B-50 50 300 40 554 476

Ex407B-75 75 115 217 186

A.W

renc

hes

E.Pl

iers

F.Ham

mer

sH

.Pun

ches

M.C

hise

ls

C.So

cket

s an

d Ac

cess

orie

sG

.Scr

ewdr

iver

sJ.S

crap

ers

L.Fi

les,

Scis

sors

,Saw

N.S

hove

lsK.

Brus

hes

P.Cla

mps

and

Add

ition

alTo

ols

R.To

olki

t

39

Ex405No. A L H Be Al

Deck ScraperEx405-75 75 150 26 288 248Ex405-125 125 235 43 986 847

Ex407No. A L Be Al

Long Blade ScraperEx407-60 60 185 509 437Ex407-100 100 225 1126 967Ex407-125 125 225 2031 1745Ex407-150 150 180 2790 2397

Ex403 No. L Be Al

Triangular ScraperEx403-380 380 307 264

Ex406 No. A L Be Al

Plate ScraperEx406-60 60 185 1030 885

40

Ex411Half Round File

No. L Be Al

Ex411-200 200 248 248

Ex411RNo. L Be Al

Ex411R-200 200 333 286Ex411R-250 250 404 347Round File

Deck

ScraperLong Blade Scraper

TriangularScraperPlate

Scraper

HalfRound

FileRound

FileH

andFile

Tinner's Snip Plate ShearScissors

Ex608No. L Be Al

Ex608-275 275 534 458

Tinner's Snip Plate Shear

Ex609No. L Be Al

ScissorsEx609-225 225 328 281

Ex411FNo. L Be Al

Hand FileEx411F-200 200 208 179Ex411F-250 250 510 439Ex411F-300 300 686 589

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

41

Ex409No. L L1 Be Al

KnifeEx409-106 185 106 83 71

KnifeEx410

No. L L1 Be Al

Ex410-250 250 130 78 67

Ex410SKnife

Ex410S-180 180 80 59 51

No. L L1 Be Al

Ex609SNo. L Be Al

ScissorsEx609S-210 210 315 270

42

Putty Knife

Ex118BNo. L Be Al

Hack Saw BladeEx118B-300 300 26 22

Ex119No L Be

Hand SawEx119-680 680 539

Ex118ANo L

Hack Saw FrameEx118A-385 385 543

No L B Be AlEx408 Ex408-25 200 25 66 57

Ex408-50 200 50 85 74Ex408-100 200 100 154 132

ScissorsKnifeKnifeKnife

PuttyKnife

Hand

SawH

ackSaw

Frame

Hack

Saw Blade

Hack Saw Frame

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

43

TechnologySheet pressing for shovels.Digging Tools Design according to international standard.

Ex1004No. L B Be Al

Ex1005Shovel

Ex1006Shovel, Round Point

Ex1007Edging Spade

44

ScoopEx1004-120 200 120 876 746

Ex1005-250 300 250 1405 1207

No. L B Be Al

No. L B Be Al

No. L B Be Al

Ex1006-243 300 243 1989 1709

Ex1007-195 290 195 1725 1482

ScoopShovelShovel,Round

PointEdging Spade

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

45

BrushesMade of beryllium copper wires or brass wires.The products wear well.

Ex1001Brush

No. L S

Ex1001-3Ex1001-4Ex1001-5

350350350

345

165217254

Ex1002Brush

Ex1002-180 327

No. L

180

Ex999 Ex999-150 150 418

Wheel Brush

No. Dia

Ex1000-125 125 494Ex1000Cup Brush

No. Dia

46

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

47

Unique Range of Safety ToolsSafety Tools in Beryllium-Copper Alloy or Aluminium-Bronze Alloy.Approved for use in Ex / ATEX zones.

Ex610No. L B Be Al

Ex610S

Ex901

Ex302Marking Tool

Tweezers, Standard Type

48

Ex610-10 100 10 31 22Ex610-15 200 15 74 64

Tweezers, Sharp TypeEx610S-155 155 48 41

Ex901-90 90 2552 2193Ex901-160 160 4032 3464Ex901-250 250 8623 7408

No. L Be Al

No. B Be Al

"G" Clamp

Ex211No. B Be Al

No. L Dia. Be Al

Earthing ClampEx211-160 160 3249 2791

Ex302-3 180 3 10 8.6Ex302-5 250 5 44 38

Tweezers,Standard

TypeTw

eezers, SharpType

"G" Clam

pEarthing Clam

pM

arkingTool

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acce

ssor

ies

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

nd A

dditi

onal

Tool

sTo

olki

t

Ex308A No. L B H Be Al

Caulking ToolEx308A-40 200 40 9.6 558 480

Ex114 No. L Be Al

Scraper, Pick and ScalersEx114-450 450 1392 1196

Ex308B No. L Hex Be Al

Caulking ToolEx308B-32 1000 32 5417 4654Ex308B-36A 1200 36 10359 8900Ex308B-36B 1500 36 1471 1264Ex308B-50A 1000 50 1954 1679Ex308B-50B 1200 50 2413 2073

Ex1301 No. S L A Be Al

CrowbarEx1301-19 19 500 40 1272 1093Ex1301-23 23 800 45 2748 2129Ex1301-28 28 1000 50 3464 2976

Ex1303 No. S L Be Al

Wrecking BarEx1303-16 16 400 1304 1120Ex1303-19A 19 600 2624 2254Ex1303-19B 19 760 3240 2781Ex1303-19C 19 900 3734 3208

50

Ex1101No. L B H Be Al

WedgeEx1101-20 200 20 30 529 455Ex1101-25A 150 25 8 104 89Ex1101-25B 150 25 13 189 162Ex1101-30 200 30 30 788 677Ex1101-32 180 32 13 312 268Ex1101-40A 150 40 8 203 175Ex1101-40B 200 40 40 1388 1192Ex1101-40C 230 40 20 855 735Ex1101-40D 250 40 30 1336 1148Ex1101-50A 100 50 10 236 203Ex1101-50B 135 50 18 549 472Ex1101-50C 150 50 13 445 382Ex1101-50D 180 50 19 745 640Ex1101-50E 200 50 12 553 475Ex1101-50F 300 50 40 2441 2100

Ex113Carbide Drum Opener

No. L Be AlEx113-310 310 871 748

Ex1302 Ex1302-16 16 500 100 1305 1121Ex1302-20 20 600 120 2170 1864Ex1302-22 22 800 140 3188 2739

No. S L H Be Al

Angle Tracing Point

Ex125 Ex125-250 250 300 1265 1087

No. L H Be Al

Tri Square

CaulkingTool

CaulkingTool

Crowbar

Wrecking Bar

Scraper,Pick and Scalers

Carbide Drum

Opener

Wedge

Angle

TracingPoint

TriSquare

Wre

nche

sPl

iers

Ham

mer

sPu

nche

sCh

isel

s

Sock

ets

and

Acc

esso

ries

Scre

wdr

iver

sSc

rape

rsFi

les,

Scis

sors

,Saw

Shov

els

Brus

hes

Clam

ps a

ndA

dditi

onal

Tool

sTo

olki

t

51

Ex126Ruler

Ex108 No. L Be Al

Pick

Ex116 No. B Be Al

Rake

Ex109 No. B Be Al

Fork

Ex115 No. B Be Al

Hoe

No. S L Be Al

Ex126-30 30 335 69 59Ex126-50 50 545 109 94

Ex116-300 300 542 466

Ex109-280 280 1845 1585

Ex115-200 200 1802 1548

Ex108-420 420 1368 1175

52

RulerRakeForkH

oePick

Ex117Bucket Alu

BucketShacklePipe

CutterChain H

oist

No. Dia L Be Al

Ex117-250 250 12L 655 563.5

Ex900No. L B Be Al

ShackleEx900-20 72 20 720 674

Ex1512No. Max Pipe Size Be Al

Pipe CutterEx1512-50 50 (2") 2360 2647

Ex903Chain Hoist

Ex903-0.5 0.5 15830 13600Ex903-1 1.0 19555 16800Ex903-2 2.0 22698 19500Ex903-3 3.0 25026 21500

No. Cap. Ton Be Al

53

Socket Set