4
Newtec M6100 Broadcast Satellite Modulator Newtec www.newtec.eu The Newtec M6100 Broadcast Satellite Modulator is the new generation DVB-S2, DVB-DSNG and DVB-S modulator specifically designed for broadcast direct-to-home, primary distribution to headends and contribution of television and radio content. The M6100 can be used in conjunction with set-top boxes, professional IRD’s or professional satellite demodulators such as the AZ910. Delivering the highest uptime for vital links Uptime and reliability are essential in the design of the modulator, taking a vital role in the satellite network. Input source redundancy, and the shortest redundancy switch-over times of modulators, operating both in 1+1 and N+1 topologies, are setting the standard in our industry. Advanced capabilities such as a built-in MPEG Transport Stream analyser, support of SMPTE 2022 FEC at the GbE inputs (for distributed IP headends), and native support of Carrier ID insertion in the NIT table of the Transport Stream further increase uptime and QoS. Get the best performance and lower your costs The Broadcast Satellite Modulator performs among the best, offering unmatched bandwidth efficiency optimization options, thereby lowering overall Total Cost of Ownership. The fully automated operation of Newtec´s field-proven Equalink® pre-distortion technology is now available for any satellite transmission application. Equalink pre- distortion provides up to 10% bandwidth gains. The modulator also supports Clean Channel Technology TM , the first in a series extensions to DVB-S2, further improving satellite efficiency by up to 15%, enabling much smaller carrier spacing. At the output of the Broadcast Satellite Modulator, the signal is available in IF or extended L-band (950 MHz-2150 MHz), providing a compact and cost effective solution. A switchable 10 MHz reference signal for an outdoor BUC is multiplexed on the L-band interface. The Broadcast Satellite Modulator can be easily monitored and controlled via a comprehensive front panel menu, advanced web GUI as well as via SNMP protocol. This enables easy integration into any industry-standard EMS/NMS system. Evolve towards tomorrow’s technology Built upon flexible and latest generation programmable technology, the Broadcast Satellite Modulator is a future-proof building block that lets any satellite network evolve to the next level of capabilities. A scalable, pay-as-you-grow, licensing and software upgrade mechanism facilitates the launch of new services, or last minute network design changes, without rebuilding the entire network infrastructure. Migration from ASI to GbE and IF to L-band are established using simple in-field installation of license keys. Additional capabilities such as DVB-S2 extensions, RF Carrier ID and other are anticipated to become available on the platform as the standardization efforts materialise in the near future. Description Newtec’s Next Generation Broadcast Satellite Modulator is not just a modulator. It’s a platform that takes a vital role in your networks, performs the best on the market and helps you evolve your business through ongoing market and technology innovations.

Newtec M6100 Broadcast Satellite Modulator · 2018-02-13 · analyser, support of SMPTE 2022 FEC at the GbE inputs (for distributed IP headends), and native support of Carrier ID

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

Newtec M6100 Broadcast Satellite Modulator

NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

www.newtec.eu

The Newtec M6100 Broadcast Satellite Modulator is the new generation DVB-S2, DVB-DSNG and DVB-S modulator specifically designed for broadcast direct-to-home, primary distribution to headends and contribution of television and radio content. The M6100 can be used in conjunction with set-top boxes, professional IRD’s or professional satellite demodulators such as the AZ910.

Delivering the highest uptime for vital linksUptime and reliability are essential in the design of the modulator, taking a vital role in the satellite network. Input source redundancy, and the shortest redundancy switch-over times of modulators, operating both in 1+1 and N+1 topologies, are setting the standard in our industry.

Advanced capabilities such as a built-in MPEG Transport Stream analyser, support of SMPTE 2022 FEC at the GbE inputs (for distributed IP headends), and native support of Carrier ID insertion in the NIT table of the Transport Stream further increase uptime and QoS.

Get the best performance and lower your costsThe Broadcast Satellite Modulator performs among the best, offering unmatched bandwidth efficiency optimization options, thereby lowering overall Total Cost of Ownership. The fully automated operation of Newtec´s field-proven Equalink® pre-distortion technology is now

available for any satellite transmission application. Equalink pre-distortion provides up to 10% bandwidth gains.The modulator also supports Clean Channel TechnologyTM, the first in a series extensions to DVB-S2, further improving satellite efficiency by up to 15%, enabling much smaller carrier spacing.

At the output of the Broadcast Satellite Modulator, the signal is available in IF or extended L-band (950 MHz-2150 MHz), providing a compact and cost effective solution. A switchable 10 MHz reference signal for an outdoor BUC is multiplexed on the L-band interface.

The Broadcast Satellite Modulator can be easily monitored and controlled via a comprehensive front panel menu, advanced web GUI as well as via SNMP protocol. This enables easy integration into any industry-standard EMS/NMS system.

Evolve towards tomorrow’s technologyBuilt upon flexible and latest generation programmable technology, the Broadcast Satellite Modulator is a future-proof building block that lets any satellite network evolve to the next level of capabilities. A scalable, pay-as-you-grow,

licensing and software upgrade mechanism facilitates the launch of new services, or last minute network design changes, without rebuilding the entire network infrastructure. Migration from ASI to GbE and IF to L-band are established using simple in-field installation of license keys.

Additional capabilities such as DVB-S2 extensions, RF Carrier ID and other are anticipated to become available on the platform as the standardization efforts materialise in the near future.

Description

Newtec’s NextGeneration BroadcastSatellite Modulator is not just a modulator. It’s a platform that takes a vital role in your networks, performs the best on the market and helps you evolve your business throughongoing market andtechnology innovations.

Key features

• DVB-S2andDVB-DSNG/Scompliant• QPSK,8PSK,16APSKand32APSK• Baudraterange:0,05–68Mbaud• Dataratesupto216Mbit/s(dependentonconfiguration)• AutomaticTSrateadaptation• SupportsSFNNetworksusingtransparentTSpass-through• ExceptionaljitterrecoveryonTSoverIPinputs• Built-inTSAnalyserwithPCRjittermeasurements• InsertionofRFICarrier-IDinvideoTransportStream• Optionalopportunisticdatainsertionupto20Mbps(MPE)• OptionalredundantASItransportstreaminterfaces• OptionalredundantGbEinterfaceswithSMPTE2022FEC• Externalreferenceinput

Main advantages

• Highestsystemreliabilityandserviceuptimethroughrobustdesignandindustryleadingredundancysolutions• LowTCOasaresultofveryhighbandwidthefficiencytechnologyoptions,andeaseofmonitoringandcontrol• CleanChannelTechnology™providesupto15%bandwidthefficiencygainsontopoftheDVB-S2standard• AutomatedEqualink®pre-distortionprovidesupto10%bandwidthgains,higherQoSandgeographiccoverage• Built-insupportforopportunisticdatainsertion,interoperablewithIRD’sthatsupportMultiProtocolEncapsulation(MPE)• Easyintegrationwithindustryleadingmanagementsystems(EMS/NMS/OSS)• SafeinvestmentastheplatformsupportsadvancedcapabilitiessuchasproMPEGFECattheinput,built-intransportstream

analyzer and carrier-ID• Pay-as-you-growflexiblelicensingscheme• PlatformpreparedforfutureDVB-S2extensionsandothercapabilitiessuchasRFcarrier-ID*• Future-proofdesigncombiningvideoandIPmulti-servicecapabilities,supportstransportoftoday´sandtomorrow´sservices

Applications

• BroadcastDirect-to-home(DTH)• BroadcastPrimaryDistribution• BroadcastContribution

Support services for your professional equipment

Care Pack Basic and Care Pack Enhanced are the Newtec service and support packages protecting your Newtec equipment over a three-year period.

Newtec M6100 Broadcast Satellite Modulator

www.newtec.eu

• IF(70/140)andL-Band(950-2150)highpoweroutputs• L-bandmonitoringoutput• MarketleadingRFpurityandperformance• Programmableamplitudeslopeequalizer• PRBSgeneratorforlinkperformancetests• Optionalhighstabilityinternalclockreference• Optional10MHzreferenceoutput• OptionalCleanChannelTechnologyTM

• OptionalautomatedlinearandnonlinearEqualink®Pre-distortion• Securefrontpanel,SNMP,HTTPandCLIinterfaces• DesignedtosupportfutureDVB-S2extensions• Feature-basedpricingandsoftwareupgrades

Related products

AZ910 Satellite demodulator (works together with M6100 to perform automated Equalink®)

AZ410 BroadcastSatelliteModemAZ7x0 FrequencyconvertersportfolioAZ212 1+1 Modulator Redundancy SwitchAZ202 Universal Switching System

Related Bandwidth Efficiency Technologies

Clean Channel TechnologyTM

Fully Automated Equalink ®

*dependingonthetechnicalrequirementsinthefuturestandards

Newtec M6100 Broadcast Satellite Modulator

NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

Input interfacesASI interface•2selectableASIinputsonBNC(F)-75ohms(coax)•2xASIoutput(loopthrough)onBNC(F)–75ohms(coax)•188or204bytemode•Rateadapter•MPTSorSPTSaccordingtoISO/IEC13818

ETH interface•Autoswitching10/100/1000Base-TEthernetinterface•TransportstreamoverIPinterface(UDP/RTP)•ForwardErrorCorrectionSMPTE2022-1and-2•188or204bytemode•Rateadapter•MPTSorSPTSaccordingtoISO/IEC13818

10 MHz Reference input •Connector BNC(F),50ohms•Inputlevel -3dBmupto+7dBm•Frequencies 1,2,5,10,20MHz

ModulationSupported modulation schemes and FEC•DVB-S Outer/InnerFEC: ReedSolomon/Viterbi MODCODs: QPSK: 1/2,2/3,3/4,5/6,7/8•DVB-DSNG Outer/InnerFEC: ReedSolomon/Viterbi MODCODs: 8PSK: 2/3,5/6 16QAM 3/4,7/8•DVB-S2: Outer/InnerFEC: BCH/LDPC MODCODS: QPSK: 1/4,1/3,2/5,1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10 8PSK: 3/5,2/3,3/4,5/6,8/9,9/10 16APSK: 2/3,3/4,4/5,5/6,8/9,9/10 32APSK: 3/4,4/5,5/6,8/9,9/10

Baud rate range•DVB-S2 0,050-68Mbaud•DVB-S 0,050-45Mbaud

Frame length•DVB-S 188bytes•DVB-S2ShortFrames 16200bits•DVB-S2NormalFrames 64800bits

Roll-off factor•20%-25%-35%

Clean Channel TechnologyTM (optional)•Roll-off:5%-10%-15%-20%-25%-35%•Optimumcarrierspacing•Advancedfiltertechnology

Output interfacesL-band (configuration option)•Connector N(F),50ohms•Frequency 950-2150MHz(10Hzsteps)•Level -35/+7dBm(+/-2dB)•Returnloss >14dB•Switchable10MHzReference•Spuriousperformance Betterthan-65dBc/4kHz@+5dBmoutputleveland>256kBaud Non-signalrelated:<-80dBc@+5dBmoutput

IF-band (configuration option)•Connector BNC(F)-75ohms (intermateable with 50 ohms)•Frequency 50-180MHz(10Hzsteps)•Level -35/+10dBm(±2dB)•Returnloss 50ohms:>14dB 75ohms:>20dB•Spuriousperformance Betterthan-65dBc/4kHz@+5dBmoutputleveland>256kBaud Non-signalrelated:<-80dBc@+5dBmoutput

L-band monitoring •Connector SMA(F),50ohms•Frequency SameasL-Bandoutputfrequency or 1050 MHz in case of IF output option only •Level -45dBm•Returnloss >10dB

10 MHz reference output (optional)•Connector BNC(F),50ohms•Outputlevel +3dBm(+/-2dB)

Internal 10 MHz Reference FrequencyStandard Stability •Stability: +/-2000ppbover0to70°C•Ageing: +/-1000ppb/year

High Stability (Optional)•Stability: +/-50ppbover0to70°C•Ageing: +/-300ppb/year

Very High Stability (Optional)•Stability: +/-2ppbover0to65°C•Ageing: +/-500ppb/10year

GenericMonitor and control interfaces•WebserverGUI(HTTP)viawebbrowser•Diagnosticsreport,alarmlog(HTTP)•SNMPv2c

Alarm interface•Electricaldualcontactclosurealarmcontacts•Connector9-pinsub-D(F)•Logicalinterfaceandgeneraldevicealarm

Physical •Height1RU,width:19”,depth51cm,5.8kg•Powersupply:90-130&180-260Vac,105VA,47-63Hz•Temperature-Operational:0°Cto+50°C/+32°Fto+122°F-Storage:-40to+70°C/-40°Fto+158°F•Humidity:5%to85%non-condensing•CElabelandUL(pending)

This brochure is provided for information purposes only. The details contained in this document, including product and feature specifications, are subject to change without notice and shall not bind Newtec in any way.

(*)SelectablevialicensekeyContactyoursalesrepresentativefordetails([email protected]).

Europe North-America South-America Asia-Pacific China MENA

Tel:+3237806500 Tel:+1203323-0042 Tel:+55112092 6220 Tel:+6567772208 Tel:+8610-82318730 Tel:+97143901878

Fax:+3237806549 Fax:+1203323-8406 Fax:+551120933756 Fax:+6567770887 Fax:+8610-82318731 Fax:+97143686768

Newtec M6100 Broadcast Satellite Modulator Orderingn°Configuration OptionsCategory M6100

Select 1 optionM6100 Platform M6100 Chassis Version 01 CH-01

Select 1 optionM6100 Operating

SoftwareM6100MajorSoftwareVersionR1* MS-12

Select 1 optionVideo Package VideoTS,Carrier-ID(NIT),TSAnalyser* VP-01

Select minimum 1 option

Video InterfaceASI (2 red. inputs, 2 out) (req. VP-01) AS-01GbETSoIPinputs,FEC(req.VP-01)* VI-01

Select 1 option

Modulator Output Interface

L-bandwithswitchable10MHzoutput* OU-00IF(50-180MHz)* OU-01IF+L-bandwithswitchable10MHzout* OU-02

Select 1 option

Internal Reference ClockStandard Internal 10MHz IR-00High stability 10MHz IR-01Very High Stability 10MHz IR-02

Select 1 option

Modulation Standard and Coding

DVB-SQ/8PSK* SC-01DVB-S/S2QPSK* SC-02DVB-S/S2Q/8PSK* SC-03DVB-S/S2Q/8PSK16QAM16APSK* SC-04DVB-S/S2Q/8PSK16QAM16/32APSK* SC-05

Select 1 option

Maximum Modulation Symbol Rates

ModulationSymbolRate5Mbaud* SR-05ModulationSymbolRate15Mbaud* SR-15ModulationSymbolRate36Mbaud* SR-36ModulationSymbolRate54Mbaud* SR-54ModulationSymbolRate68Mbaud* SR-68

Additional OptionsCategory

Max. 1 option per categoryReference Clock Output 10 MHz Reference Output (BNC) RO-01

Max. 1 option per category

Clean Channel TechnologyTM

CleanChannelTechnologyfor5Mbaud* CC-05CleanChannelTechnologyfor15Mbaud* CC-15CleanChannelTechnologyfor36Mbaud* CC-36CleanChannelTechnologyfor54Mbaud* CC-54CleanChannelTechnologyfor68Mbaud* CC-68

Max. 1 option per categoryPre-Distortion AutomatedEqualink®Pre-Distortion* AE-01MPE Insertion DatainsertioninTSviaMPE(req.VP-01)* VM-01

ServicesCategory

Max. 1 option per category

SupportCarePack3Basic GA-08CarePack3Enhanced GA-09

Ordering Information

Newtec M6100 Broadcast Satellite Modulator Rev. 1/03.2012