Newsletter October 2016 - asd-stan.org · Newsletter – October 2016 ... The status of standardisation of DOA Think Tank guidelines is being presented at EASA DOA and product certification

Newsletter – October 2016

To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31

Brussels, 31/10/2016

General News from the Director

Dear Readers of our Newsletter,

In October 2016, ASD-STAN has published 18 new documents, out of which we want to

highlight the importance of the following documents: prENs 9101 P8, prEN 9110 P5, prEN

9120 P5, prEN 4681-005 P2, prEN 4681-006 P2 and prEN 3719 P4, which are available in

our website for purchase. In the next pages you can have more information about our

new publications and new projects for this month.

Additionally, in order to improve our engagement with the public, we have decided to let

our customers or anyone working in the aerospace industry to provide their opinion for the possible improvement

of our standards.

Thank you and enjoy the read!

With the best regards,

Andreas Jain

Director ASD-STAN

Feedback?

If you have some comments or remarks on the prENs or ENs produced by ASD-STAN, please let us

know by sending us an email to [email protected]. We will forward your comments to the

Working Group in charge of this particular standard and make sure they will take into account your

remarks for an eventual revision of the standard or any new proposal.

mailto:[email protected]

http://www.asd-stan.org/downloads/pren-9101-p8/




http://www.asd-stan.org/downloads/pren-4681-005-p2/




Newsletter– October 2016 2/13


Chairman of ASD EAQG DOA Think Tank Mr. Patrick LE GUIRRIEC:

The ASD DOA Think Tank is producing technical guidelines to become means of

compliance with EASA requirements aiming at simplifying the interface between

DOA (Design organisation Approval) holders and their suppliers.

The standardisation as a prerequisite to the recognition of our work should be

diligent, intelligent and reactive. This ASD-STAN process is complex and has

much length to the ballot and publication process.

ASD-STAN should give more accent on the quality of the technical content than on the dressing, but

nevertheless keeping it as an essential parameter of quality because such documents are often written

by non-professionals.

A big effort has been done in 2016 by the ASD-STAN community that should be pursued in 2017 to bring the

necessary credibility to the activity knowing that more and more industry standards are being published to

support the EASA suite of requirements.

The status of standardisation of DOA Think Tank guidelines is being presented at EASA DOA and product

certification workshop in Cologne 22nd November.

I thank all ASD-STAN experts and managers who help us to progress the DOA work with professionalism and

dedication from the beginning of our working together.

Our common achievement as a premiere in DOA history is the publication of the first standard as prEN 9250

in May 2016. Six other DOA standards will follow in 2017.





Important news:

In October 2016, ASD-

STAN has published 18

prENs, out of which we

want to highlight the

importance of the

following documents:

9100 Quality series-see

the following column

for more information;

prEN 4681-005 P2,

prEN 4681-006 P2,

prEN 3719 P4, which

are available in our

website for purchase.

Quality Series

standards: prENs 9101,

prEN 9110 and prEN

9120 published in

October and are

available in our website;

use the below links for

more information and

purchase

prEN 9101 P8 HERE

prEN 9110 P5 HERE

prEN 9120 P5 HERE

Requests for the

network license:

If you wish to have a

network license to use

the document/s

inside your

organization please

send the request to

our sales department

here

The Core Quality standards prEN 9101, prEN 9110 and prEN 9120

(2016) have been published in October and are available in our

website!!!











ASD-STAN FULL Document Index can be found HERE

Add me to your Document Monthly Digest distribution list

To Subscribe to Individual New Document Alerts click HERE

To view all the previous Newsletter please click HERE


http://asd-stan.org/ASD-STAN Standards Index.pdf

mailto:Pari Aliyeva <[email protected]>

http://asd-stan.org/feed/?post_type=download

http://www.asd-stan.org/newsletter-pdf/



"Breaking News:

One of the most interesting innovations in aeronautics is the rapidly growing development of

Unmanned Aircraft Systems UAS. ASD-STAN (D1WG4) is actively working on new standards that

make this technology safe and available for global commercial and industrial use.

In order to support the safe operation of these systems also in rural areas we have started an

initiative for new regulations. The existing "Geo-Fencing" - avoidance of no-fly-zones - is not enough

to secure a safe traffic in those areas. Therefore we have started the navigation support "Geo-

Guiding". This can be described as "roads in the skies".

Autonomously flying systems need to follow these Geo-Guides. In order to enforce such regulations

the UAS need to be identified, similar to the number plate of a car. In the UAS case such identification

shall be a transmitted digital code which contains all necessary information to trace the UAS to its

operator.

The Chinese standardization organization CAPE will work together closely with DIN NL. We want to

establish such coding which will be internationally recognized.

On October 28, 2016 there was a conference at CAPE in Beijing where Bill Holler (ASD-STAN TA

Chairman) could achieve a common agreement to cooperate on this matter. Since most of the

hardware and basic components are being developed in China, our cooperation will have a strong

effect on the future worldwide market."

Bill Holler ASD-STAN Technical Authority Chairman




2016

173 New Work Proposals (stage 00.00)

185 New Work Proposal Ballots (stage 10.00)

70 Published prENs (stage 40.00)

63 Documents sent for Formal Vote (stage 50.00)

47 Ratified EN (stage 60.00)

2015




95 Documents Sent for Formal Vote (stage 50.00)


2014




99 Documents Sent for Formal Vote (stage 50.00)


0

20

40

60

80

100

120

140

160

180

200

NWP (stage00.00)

NWP Ballots(stage 10.00)

Published prEN(stage 40.00)

Formal Vote(stage 50.00)

Ratified EN(stage 60.00)

173 185

70 63 47

84 84 80 95

115

94 78

129

99

60

2016

2015

2014




Now available at the ASD-STAN Web-shop (http://www.asd-stan.org/online-document-store/)

These prEN/TR standards are replacing any previous prEN/TR editions with the same

number. They will supersede any previous EN editions (if any) with the same number after the CEN

Formal Vote procedure.

Type Domain Number Ed Title Pages Date

prEN ELEC 3646-003 P2

Aerospace series — Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C

continuous — Part 003: Receptacle, square flange mounting — Product standard

7 01/10/16

prEN ELEC 3719 P4 Aerospace series - Aluminium or aluminium alloy

conductors for electrical cables - Product standard 7 01/10/16


Aerospace series — Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium — Part 005: AZ family, single, for use in low pressure atmosphere

— Product standard

9 01/10/16


Aerospace series — Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium — Part 006: AZA family, single and multicore assembly, for use in

low pressure atmosphere — Product standard

9 01/10/16

prEN ELEC 3745-505 P2 Aerospace series - Fibres and cables, optical, aircraft use -

Test methods - Part 505: Cable tensile strength 4 01/10/16

prEN MAT 2566 P2 Aerospace series — Fluorocarbon rubber (FPM) - Hardness

70 IRHD 5 01/10/16


80 IRHD 5 01/10/16


90 IRHD 5 01/10/16

prEN MAT 2795 P2 Aerospace series — Fluorocarbon rubber (FPM) - Low

compression set - Hardness 50 IRHD 5 01/10/16










http://www.asd-stan.org/online-document-store/



prEN MAT 2899 P2 Aerospace series — Vulcanized rubbers - Test on the

susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers

8 01/10/16

prEN MAT 4842 P1

Aerospace series — X5CrNiCu15-5 (1.4545) — Consumable electrode remelted (ESR or VAR) — Solution

treated and precipitation treated (H1025) — Bar for machining — a or D ≤ 250 mm — 1 070 MPa ≤ Rm ≤ 1 200

MPa — Premium quality (pq)

6 01/10/16

prEN QUAL 9101 P8 Quality Management Systems - Audit Requirements for

Aviation, Space, and Defense Organizations 29 01/10/16

prEN QUAL 9110 P5 Quality Management Systems – Requirements for Aviation

Maintenance Organizations 59 01/10/16

prEN QUAL 9120 P5 Quality Management Systems – Requirements for Aviation,

Space and Defence Distributors 58 01/10/16

18 prEN published


Publication Notice – October 2016

Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .

These EN standards are replacing any previous prEN/EN editions with the same

number.

Type Domain Number Ed Title Pages Date

0 EN Published

http://www.asd-stan.org/key_contacts.html




Ballots reminder

NWP: New Work Proposal Ballot

Number Domain

Edition Title Due Date

4400-4 MAT P1 Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical Specification - Part 4: Aluminium and aluminium alloy tube

19/11/2016

4400-7 MAT P1 Aerospace series - Aluminium and aluminium- and magnesium- alloy products - Technical specification - Part 7: Aluminium alloy forgings

19/11/2016

4677-001 MAT P4 Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part

001: Quality of welded assemblies

19/11/2016

2267-010 ELEC P4 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single

UV laser printable – Product standard

19/11/2016

4604-007

ELEC P5 Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 Ohms, 200 °C, type WN - Product standard

19/11/2016





NDB : National Domain Ballot

Number Domain Edition Title Due Date

3155-017 ELEC P2 Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard

22/12/2016

3155-018 ELEC P4 Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male 018, type A, crimp, class S - Product standard

22/12/2016

3155-019 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product

standard

22/12/2016


standard

22/12/2016


standard

22/12/2016

3155-065 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 Product

standard

5/01/2017

3155-083 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 083: Contact, electrical, female, type A, crimp, class S, size 8 —

Product standard

5/01/2017

3155-026 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product

standard

5/01/2017

3155-027 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product

standard

5/01/2017

3155-076 ELEC P2 Aerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product

standard

5/01/2017

3155-077 ELEC P2 Aerospace series - Electrical contacts used in elements of connection - Part 077: Contacts, electrical, female, type A, crimp, class R - Product

standard

5/01/2017

3155-016 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product

standard

12/01/2017


standard

12/01/2017


standard

12/01/2017





3155-075 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp,

class R - Product standard

12/01/2017

3155-024 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S

- Product standard

12/01/2017

3155-025 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class

S - Product standard

12/01/2017

3155-044 ELEC P2 Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard

19/01/2017

3155-045 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T -

Product standard

19/01/2017

3155-054 ELEC P2 Electrical contacts used in elements of connection - Part 054: Contacts, electrical, male, thermocouple NiAl, type C, crimp, class T - Product

standard

19/01/2017

3155-055 ELEC P2 Electrical contacts used in elements of connection - Part 055: Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T - Product

standard

19/01/2017

3155-056 ELEC P2 Electrical contacts used in elements of connection - Part 056: Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T - Product

standard

19/01/2017

3155-057 ELEC P2 Electrical contacts used in elements of connection - Part 057: Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T - Product

standard

19/01/2017


standard

26/01/2017


standard

26/01/2017

3155-078 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 078: Contacts size 22 for EN 2997, electrical, male, type A, crimp,

class S — Product standard

26/01/2017

3155-079 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp,

class S — Product standard

26/01/2017

3155-080 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp,

class T — Product standard

26/01/2017

3155-081 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp,

class T — Product standard

26/01/2017

3155-082 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 082: Contacts, electrical, female, type A, crimp, class S — Product

standard

26/01/2017





4840-101 ELEC P1 Aerospace series - Heat shrinkable moulded shapes - Part 101: polyolefin, semi-rigid, limited fire hazard, temperature range -30 to 105ºC

31/01/2017

4840-002 ELEC P1 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions

31/01/2017

