NEW MONSTER TRUCK FUN FOR EVERYONE!downloads.hobbico.com/greatnews/2017/2017-05-great-news.pdf · 30+ mph! Fully assembled, fully loaded and ready for action! Everything you need

Ready-To-Run 1/18 Scale Brushless 4WD VehiclePages 2 - 3

R A D I O C O N T R O L • M A Y 2 0 1 7G R E A T P L A N E S M O D E L D I S T R I B U T O R S

Team Associated RC8B3.1 nitro and electric kitsPages 6 – 8

New Duratrax tires for demanding drivers!Page 9

PLUS:

®

March Bash-nessChampion!See Pages 16 - 17

G E N E R A L H O B B Y • M A Y 2 0 1 7G R E A T P L A N E S M O D E L D I S T R I B U T O R S

Artesania Latina ART&WOOD Model GlobePage 17

Plastic models for all ages and interests.Pages 2-16

PLUS:

Click for Radio Control

Click for General Hobby

NEWPRODUCTw

ww

.gp

de

ale

r.c

om

NEWPRODUCTw

ww

.gp

de

ale

r.c

om

NEWPRODUCTw

ww

.gp

de

ale

r.c

om

NEWPRODUCT

Ready-To-Run 1/18 ScaleBRUSHLESS 4WD Vehicle

ww

w.g

pd

ea

ler.c

om

MONSTER TRUCK FUN FOR EVERYONE!

❚ Full-time, reliable 4WD for con�dent control

❚ Satisfy your need for speed with brushless power

❚ High-traction tires grip the surface with authority

❚ All-weather electronics let you defy the elements

❚ The 2.4GHz radio means you and your friends can drive interference-free

❚ Big Bore oil shocks effortlessly handle jolts and bumps

❚ Durable front and rear bumpers protect against impacts and damage

❚ Boost performance even more with optional LiPo battery power

❚ This rugged, compact truck goes where other monsters can’t!

www.gpdealer.com ❘ May 2017 3May 2017 ❘ 2 Tech Support 217-398-8970 Products for everyone!

30+ mph!

Fully assembled, fully loaded and ready for action!Everything you need for full-on bashing is right here, starting with a factory-built vehicle with a �nished, trimmed and decaled monster truck body. Also included: a 2-channel radio system, four “AA” batteries, 7.2V 1300mAh NiMH battery and USB charger.

May 2017 ❘ 2

Fully assembled, fully loaded and ready for action!Everything you need for full-on bashing is right here, starting with a factory-built vehicle with a �nished, trimmed and decaled monster truck body. Also included: a 2-channel radio system, four “AA” batteries, 7.2V 1300mAh NiMH battery and USB charger.

®

DIDC0058 1/18 Scale Brushless 4WD Monster Truck RTRLength: 10.5 in (266 mm)Width: 7.8 in (198 mm)Height: 4.6 in (117 mm)Weight w/battery: 1.4 lb (632 g)Requires: nothing!

The 1/18 scale Brushless Monster Truck is designed — and priced — for everyone to enjoy!

From the Experts:No matter what your skill level is, Dromida’s Brushless Monster Truck delivers big-time fun in 1/18 scale! It’s built tough to withstand rugged racing and bashing, with the performance bonuses of brushless power and 4WD. Plus, it comes Ready-To-Run, so you can take it right out of the box and start competing against your friends and attacking any terrain!

Long story short...

www.gpdealer.com ❘ May 2017 5

NEWPRODUCT

May 2017 ❘

NEWPRODUCT

4

ww

w.g

pd

ea

ler.

co

m

Tech Support 217-398-8970 Products for everyone!

ww

w.g

pd

ea

ler.

co

m

❚ Simple enough for beginners, but with customization to entice experienced robot fans as well

❚ At 9” tall, ROBO HERO is just the right size for exploring desks, tables, �oors, etc.

❚ The Arduino-compatible control board features easy-to-understand hardware/software

❚ 17 different joints equipped with high-torque servos provide steady, �uid motion

❚ Use the Action Editor to create your own functions and programs, and share with others

❚ Enjoy up to 45 minutes of robotic action after charging the 7.2V 550mAh Lithium battery

TTRX1000 ROBO HERO App-Controlled Robot RTRTTRX1010 ROBO HERO App-Controlled Robot KitHeight: 9.1 in (230 mm)Width: 3.15 in (80 mm)Length: 4.5 in (115 mm)Weight: 1.1 lb (500 g)Requires (both): nothing

ROBO HERO App-Controlled Robot

For those who want to learn just how ROBO HERO works, there’s an easy-to-assemble kit version. Or, you can simply take the RTR version right out of the box and you’re Ready-To-Robot!

Download the free TT Robotix app to control your ROBO HERO via Wi-Fi with iOS and Android devices.

Choose from 42 pre-programmed routines/motions, including dancing, clapping, balance, going from a prone position to standing, and many more.

Long story short...

From the Experts:He’s the humanoid who will fascinate you with his animation! You control ROBO HERO’s realistic movements with an app on your smartphone or tablet, so there are no cables or computers to contend with. He’s surprisingly agile, highly programmable and available in kit form or ready for action right out of the box!

ROBO HERO is the perfect way for anyone to get into the fun and exciting world of robotics!

MEET YOUR NEW ROBOT COMPANION

May 2017 ❘ 6 Tech Support 217-398-8970 Products for everyone! www.gpdealer.com ❘ May 2017 7

ww

w.g

pd

ea

ler.c

om

NEWPRODUCT

1/8 scale nitro off-road racing is hyper-competitive — and the RC8B3.1 has the goods to remain the undisputed leader!

Long story short...

ProLine® “Predator” body included

Enclosed receiver box

94mm CVA driveshafts increase traction and chassis support

16mm Big Bore 6061 aluminum shock bodies and bleeder-style caps, with new 20mm I.D. springs

H.T.C. (High Torque Capacity) differentials with increased �uid capacity and a more consistent feel lap after lap

New 4-shoe clutch provides precise power transfer and is easy to maintain

Suspension arms have been updated to modern race specs

Easily accessible front and rear differentials

®

NEWPRODUCTw

ww

.gp

de

ale

r.c

om

THE EVOLUTION OF A NITRO CHAMPION

❚ Combining all of the Factory Team’s latest innovations, the RC8B3.1 is a 1/8 scale nitro powerhouse ready to continue owning the podium

❚ The hard-anodized 7075-T6 aluminum chassis is designed for optimum weight distribution, ground clearance and overall handling

❚ Take advantage of the world class drivetrain and suspension package that takes performance and reliability to new levels

❚ Power transfer is provided by an all-new, easy-to-maintain 4-shoe clutch

❚ These improvements, and more, make the RC8B3.1 more stable and easier to drive, and adaptable to a wider variety of track conditions

❚ Enjoy 90% parts compatibility with the RC8B3.1e Electric Buggy Team Kit

80935 ASCD0935 RC8B3.1 Nitro 4WD Competition Buggy Team KitLength: 19.2 in (488 mm)Width: *Weight: *Wheelbase: 12.9 in (328 mm)Requires: 2-channel radio system, servos, engine, exhaust system, batteries, wheels and tires; clear body included*Actual width and weight will vary depending on the engine, exhaust, electronics, wheels and tires used in the �nished kit.

Shown with painted body; body included is clear.

1/8 Scale 4WD NitroCompetition Buggy Kit

www.gpdealer.com ❘ May 2017 9May 2017 ❘ 8 Tech Support 217-398-8970 Products for everyone!

NEWPRODUCTw

ww

.gp

de

ale

r.c

om

Baja B5 1/5 Scale Buggy Tires

NEW DURATRAX TIRES FOR DEMANDING DRIVERS

❚ A custom �t for the 1/5 scale HPI Racing Baja 5B buggy

❚ Four front tread patterns and �ve rear tread patterns to choose from, including a Paddle rear tire designed speci�cally for sand

❚ All are molded in CS sport compound

❚ Available unmounted only (foam inserts included)

❚ Foam inserts are also available separately

❚ All are sold in pairs, and packaged in re-sealable plastic bags

DTXC5001 Ribz B5 Tire Front (2)DTXC5002 Bandito B5 Tire Front (2)DTXC5003 Lockup B5 Tire Front (2)DTXC5004 Six Pack B5 Tire Front (2)DTXC5011 Paddle B5 Tire Rear (2)DTXC5012 Bandito B5 Tire Rear (2)

❚ All are molded in soft C2 compound

❚ Choose from �ve proven tread designs

❚ Available mounted on 8-spoke black or black-chrome rims, or unmounted with foam inserts included

❚ Boosts performance for the Traxxas® E-Revo and Summit and HPI Savage XS Flux

❚ Also a great choice for 1/10 scale buggy rear tires

❚ All are sold in pairs, and packaged in re-sealable plastic bags

2.2” ST Tires

DTXC5013 Lockup B5 Tire Rear (2)DTXC5014 Six Pack B5 Tire Rear (2)DTXC5015 Dinero B5 Tire Rear (2)DTXC5017 B5 Tire Insert Front (2)DTXC5018 B5 Tire Insert Rear (2)

DTXC5101 Lockup ST 2.2 Black (2)DTXC5102 Lockup ST 2.2 Black Chrome (2)DTXC5103 Six Pack ST 2.2 Black (2)DTXC5104 Six Pack ST 2.2 Black Chrome (2)DTXC5105 Bandito ST 2.2 Black (2)DTXC5106 Bandito ST 2.2 Black Chrome (2)DTXC5107 Equalizer ST 2.2 Black (2)DTXC5108 Equalizer ST 2.2 Black Chrome (2)DTXC5109 Sidearm ST 2.2 Black (2)DTXC5110 Sidearm ST 2.2 Black Chrome (2)DTXC5112 Lockup ST 2.2 Tire (2)DTXC5113 Six Pack ST 2.2 Tire (2)DTXC5114 Bandito ST 2.2 Tire (2)DTXC5115 Equalizer ST 2.2 Tire (2)DTXC5116 Sidearm ST 2.2 Tire (2)

The RC8B3.1e was created with one goal in mind: to carry on Associated’s winning legacy of 1/8 scale buggy supremacy in the electric arena.

Long story short...

ww

w.g

pd

ea

ler.

co

m


Now advanced Duratrax tire tech comes to HPI’s big buggy as well as smaller trucks!

From the Experts:Mount these tires on your ride and enjoy max traction and stable handling! They come in a wide variety of proven tread patterns, and they’re tough enough to keep you in the action when the competition is in the pits.

Long story short...

®

®

A NEW TAKE ON ELECTRIC DOMINATION

DTXC5001 DTXC5002 DTXC5003 DTXC5004 DTXC5011DTXC5012

DTXC5101 DTXC5102 DTXC5103 DTXC5104 DTXC5105 DTXC5106 DTXC5107 Long story short...


❚ All of the high-performance engineering found in the RC8B3.1 nitro buggy is duplicated in the Factory Team’s RC8B3.1e electric version

❚ Shared upgrades include: - 94mm CVA driveshafts for increased traction and chassis support - 16mm Big Bore 6061 aluminum shock bodies - H.T.C. (High Torque Capacity) diffs with in creased �uid capacity - Easily accessible front and rear differentials - Suspension arms updated to modern race specs - Enclosed receiver box - ProLine® “Predator” body included

❚ The RC8B3.1e’s two-piece sliding motor mount allows for easy gear mesh adjustment and motor removal

80936 ASCD0936 RC8B3.1e Brushless 4WD Competition Buggy Team KitLength: 19.2 in (488 mm)Width: *Weight: *Wheelbase: 12.9 in (328 mm)Requires: 2-channel radio system, servos, brushless motor, ESC, batteries, wheels and tires; clear body included*Actual width and weight will vary depending on the motor, ESC, electronics, wheels and tires used in the �nished kit.

1/8 Scale 4WD BrushlessCompetition Buggy Kit

May 2017 ❘ 10

ww

w.g

pd

ea

ler.

co

m

Tech Support 217-398-8970 Products for everyone! www.gpdealer.com ❘ May 2017 11

FEATUREDMANUFACTURER FEATUREDMANUFACTURER

GET YOUR BOAT ON!Boating season is here: are you ready? Show up with an AquaCraft model and you’re sure to make a BIG splash. Choose the style that best suits you — they all boast quiet electric power and quality Tactic radios. Best of all, they’re all Ready-To-Run, so you can be out shredding the water in no time!

Ready-To-Run Brushless Airboat

Ready-To-Run EP Airboat

Ready-To-Run Brushless 2.4GHz Boat

Ready-To-Run Electric Offshore Superboat

Ready-To-Run EP Catamaran

TTX300 radios add to the fun!

Race worry-free with friends — the TTX300’s 2.4GHz technology elimi-nates interference, for total control.

❚ Distinctive cat styling with impressive performance!

❚ At over 2’ long, the Rio EP dominates any body of water!

❚ Compact and nimble, with a breakaway rudder to prevent damage!

❚ Sized to feel right at home on smaller swamps!

❚ Blast across the bayou with brushless power and camo cool!

May 2017 ❘ 12 Tech Support 217-398-8970 Products for everyone!

ww

w.g

pd

ea

ler.

co

m


ww

w.g

pd

ea

ler.

co

mFEATUREDMANUFACTURER FEATUREDMANUFACTURER

RISP0001RISE House Racer FPV Race Gate System

Includes: (2) Ring gates – test your dexterity, and your nerves

(3) Arrows – to point the way around your course

(1) Checkered Flag gate – the of�cial starting/�nish line

(1) Pylon gate – make the sharpest turns to save valuable time

(2) 3M Command™ strips

(1) Instructional brochure

™

RISE0207 Vusion House Racer Indoor FPV Race Pack-RTFRISE0208 Vusion House Racer Indoor FPV Race Pack-FPV ReadyRotor Diameter: 125 mm (4.9 in)FPV-Ready version requires: 5+ channel SLT radio, goggles or monitorRTF requires: nothing!

❚ Ready-to-Fly version comes with a Tactic FPV-RM2 5.8GHz Monitor, FPV-G1 Goggles and a RISE J2000 6-channel 2.4GHz radio system with Flip button and monitor holder

❚ FPV-Ready version is compatible with virtually all FPV goggles and monitors on the market — just add the 5-channel SLT radio and goggles or monitor of your choice

❚ Both versions include a 600TVL camera and 25mW 40-channel 5.8GHz video transmitter

❚ Long-lasting 1S 3.7V 650mAh LiPo battery delivers 6-8 minutes of �ight time

Includes:

FEATUREDMANUFACTURER™

™

3M and Command are registered trademarks of 3M

Great addition to your House Racer Indoor FPV Race Pack!

Let your friends bring the snacks, drinks and playlists. When you bring the Vusion House Racer, you bring the party. Zip and �ip through the crowd. Create a pylon course with plastic cups. Feel the adrenaline pumping as you cross the �nish line.

Until you bring the Vusion House Racer, a party isn’t a party.

RISP0001RISE House Racer FPV Race Gate System

May 2017 ❘ 12 Tech Support 217-398-8970 Products for everyone! www.gpdealer.com ❘ May 2017 13

ww

w.g

pd

ea

ler.c

om

ww

w.g

pd

ea

ler.

co

mNEWPRODUCT NEWPRODUCT

THE ULTIMATE KIT FOR DIRT AND CLAY COMPETITION

Continuing the winning RC10B44 legacy, the RC10B64D Competition Buggy Kit is a perfect pick for high-traction action!

Long story short...

Stiff, lightweight 4mm thick carbon �ber shock towers

Aluminum/carbon �ber �oating servo mount

Center gear differential maximizes drive out of the corner

Robust suspension arms with multiple shock mounting positions

7075 anodized narrow aluminum chassis with lightweight side guards

Aluminum �oating motor mount for consistent torsional chassis �ex

12mm aluminum drive hexes both front and rear

Aluminum caster blocks for added durability

®

❚ Four-wheel drive

❚ Easy diff access for quick tuning and maintenance

❚ Front and rear anti-roll bars for �at cornering

❚ Adjustable toe-in/camber

❚ B6 generation ball cups and turnbuckles for precise adjustments

❚ Option to mount rear shocks on front or rear suspension arms

❚ Fully adjustable aluminum front and rear suspension arm mounts

❚ Full set of Factory Team ball bearings

❚ Comes with a clear buggy body with screw-mounted wing by JConcepts

1/10 Scale 4WD Electric FactoryTeam Competition Buggy Kit

90015 ASCD0015 RC10B64D 1/10 Scale 4WD Electric Factory Team Buggy KitLength: *Width: *Weight: *Wheelbase: 11.18 in (284 mm)Requires: 2-channel radio with 1 high-torque steering servo, motor, ESC, 1/10 scale buggy tires and wheels w/ 12mm hex, 2S 7.4V LiPo shorty battery pack, LiPo-compatible charger, pinion gear *Actual length, width and weight will vary depending on the electronics used in

the �nished kit.

THIS KIT IS ALL ABOUT PERFORMANCE!

May 2017 ❘ 16

ww

w.g

pd

ea

ler.

co

m

Tech Support 217-398-8970 Products for everyone!

ww

w.g

pd

ea

ler.

co

m


The BIG ROCK is the big winner, and YOU made it happen! Chosen by fans from all corners of the bashing world, against �fteen other trucks over four rounds of open voting with more than 12,000 votes cast, BIG ROCK came out on top. It’s the second time in three years that an ARRMA vehicle has won — proving once again that ARRMA has the right stuff! To �nd out more about the BIG ROCK and the entire ARRMA lineup, visit arrma-rc.com.

“IT’S A GREAT TRUCK, AND TRULY A BASHING BEAST.”You didn’t hear that from us (even though we do agree with it). That’s what the Big Squid Team had to say about the NERO BIG ROCK, and it’s easy to see why. It’s super-tough, with a composite chassis cage that can take all the mayhem you can dish out. It’s ridiculously fast, thanks to a brushless power system. And the revolutionary Diff Brain lets you switch between four driving styles — on the �y!

BIG SQUID RC: CREATED BY BASHERS, FOR BASHERSLet the other guys cover RC racing. Big Squid RC is all about bashing! From news to reviews to videos, bigsquidrc.com is THE site for guys who enjoy pushing their vehicles beyond their limits in backyards, streets, parking lots and playgrounds.

THANKS AGAIN, RC FANS — YOU KNOW A CHAMPION WHEN YOU SEE ONE!

ARRMA’S BIG ROCK IS THE 2017 BIG SQUID RC MARCH BASH-NESS CHAMPION!



reviews to videos, bigsquidrc.com is THE site for guys who enjoy pushing their vehicles





beyond their limits in backyards, streets, parking lots and playgrounds.

THANKS AGAIN, RC FANS — YOU KNOW A CHAMPION WHEN YOU SEE ONE!THANKS AGAIN, RC FANS — YOU KNOW A CHAMPION WHEN YOU SEE ONE!

beyond their limits in backyards, streets, parking lots and playgrounds.

THANKS AGAIN, RC FANS — YOU KNOW A CHAMPION WHEN YOU SEE ONE!THANKS AGAIN, RC FANS — YOU KNOW A CHAMPION WHEN YOU SEE ONE!

®

THANK YOU, ONE AND ALL™ ™

Ready-To-Run 1/8 Scale Brushless 4WD Monster Truck w/Diff Brain

REVELL OF GERMANY®

Products for everyone! 3www.gpdealer.com ❘ May 2017

ww

w.re

ve

ll.co

m

2 Tech Support 217-398-8970

ww

w.r

ev

ell

.co

m

May 2017 ❘

1/25 FORD FD-100 PICKUPFoose™ Ford!

The Foose™ Ford FD-100 has a history that spans three generations. Originally, this 1956 Ford F-100 was owned by Chip Foose’s father, Sam. At age 13, Chip Foose bought the truck from his father and drove it daily throughout high school and college. Many years later Same completely rebuilt and customized the truck using drawings done by Chip. Once Brock, Chip’s son is able to drive, the family vehicle will have a brand new owner! Kit features independent front and coil over rear suspension, dual exhaust, and solid axles for stronger construction.

85-4426 RMXS4426 Total Parts: 78 Skill Level: 4 Length: 7.3 in (184mm)

1/48 H-19 RESCUE HELICOPTERTenacious transport

H-19 helicopters were the workhorses of multiple US military branches throughout the 1950s. They also made their mark on global aviation, serving in well over a dozen countries. It served in combat, transport, and rescue service roles for the military and had a signi�cant second life in civilian aviation, as well. H-19s can carry up to eight stretchers when used as rescue transports. Their range of 470 miles made them perfect for picking up injured or downed pilots during the Korean War. Kit features display stand, two seated crew and two rescue �gures, plus separate engine doors and engine detail.

85-5331 RMXS5331 Total Parts: 84 Skill Level: 4 Length: 15.3 in (387mm)

1/16 SWISS GUARDA history of halberds

For over �ve hundred years, the Swiss Guard has defended the Vatican and the Pope. Their service has outlived wars, reformations, intrigues, assassinations, and even the virtual extermination of the entire guard. Today, the unit is composed of Swiss citizens who have completed basic training with the Swiss Army and have ful�lled the strict requirements of the Papal Guard. The halberds and uniforms are for show. The fully stocked modern armory and unarmed combat training of the individual guards is very functional. Kit features detailed dress uniform, display stand, highly detailed facial features, halberd, and Beretta

02801 RVLS2801 Total Parts: 48 Skill Level: 3 Height: 4.4 in (112mm)

1/16 REPUBLICAN GUARDAlways imitated, never outdone

Sixteen countries have or historically have had a “Republican Guard”, but France �elds the �rst and �nest Republican Guard of them all. This nearly 3,000 member team provides ceremonial displays as well as more mundane tasks like counter-sniper teams, SWAT teams, an entire regiment of cavalry, plus bands, and a motorcycle display team. If you crossed the Cirque Du Soleil with the US Navy SEALs, you’d get the French Republican Guard. Kit features display stand, highly detailed facial features, sword, and authentic decal set.

02803 RVLS2803 Total Parts: 31 Skill Level: 3 Height: 5 in (127mm)

1/35 GERMAN STAFF CAR TYPE 82 KUBELWAGENKubels for der Kampf.

The German Kübelwagen was the surprisingly capable staff car of choice for the Wehrmacht throughout much of WWII. Despite being only a two-wheel drive vehicle, it ably crossed terrain even its designers didn’t believe was possible. The air-cooled �at 4-cylinder engine took the Type 82 and the soldiers that drove it from downtown Paris to the doorstep of Moscow.

03253 RVLS3253 Total Parts: 75 Skill Level: 4 Length:4.2 in (107mm)

1/72 LEOPARD 1A5/BRIDGELAYER BIBERYour literal bridge over troubled waters

Rivers don’t care about wars. They don’t care if the bridge has been knocked down by bombs. They’re just rivers. Cross them the wrong way and they’ll sweep you off the �eld. Bridge laying apparatus like the Biber, based on a modi�ed Leopard chassis, restore mobility to armies when civilian infrastructure is damaged or non-existent. The German army uses them in concert with the Leopard 1A5--a superior mainline battle tank--to ensure the tanks can stay mobile. Kit combo features rotating turret, injection molded tracks with individual links and authentic decal sets.

03307 RVLS3307 Total Parts: 337 Skill Level: 4 Length: Biber: 6.2 in (158mm) 1A5: 5.2 in (132mm)

1/32 SUPERMARINE SPITFIRE MK.IXCStunning strafer

Spit�re �ghters helped to break German air supremacy one dog�ght at a time. By late in 1944, however, they were beginning to run out of German aircraft to �ght. Many were pressed into a ground attack role. There, they helped wreck German supply lines and hit strategic targets. Kit features detailed Mk.IXc wings with guns, detailed cockpit and instrument panel, detailed radiator, rotating 4-blade propeller, optional bomb load, detailed undercarriage, and decals for a Royal Canadian Air Force and a Royal Air Force version.

03927 RVLS3927 Total Parts: 154 Skill Level: 5 Length: 11.8 in (300mm) Wingspan: 13.8 in (351mm)

1/48 FOCKE WULF FW 190 D-9Denying the skies to enemy aircraft

By late 1944, the war, for Germany, was effectively over. Nevertheless, Luftwaffe units continued to �ght. German industry continued to pump out new and different types of planes. As the world hung in the balance, the D-9 variant of the Fw 190 took to the skies. It was faster, could �y higher, and was capable of carrying more bombs than the A variants. Despite all its advantages, it was much too late to turn the tide. Kit features detailed machine gun position, separate ailerons, rotating propeller, detailed cockpit and undercarriage plus decals for two versions.


4 Tech Support 217-398-8970May 2017 ❘ www.gpdealer.com ❘ May 2017Products for everyone! 5

ww

w.r

ev

ell

.co

mw

ww

.rev

ell.c

om

1/72 DORNIER DO 17Z-10Hunting

Twin engine Do 17 fast bombers were intended to outrun anything the Allies could put in the air and still drop their bombs on target. Z-10 variants, by contrast, were �tted with infrared searchlights and more guns for use on night missions. The guns and search equipment gave the Dorniers a chance against heavy bombers �ying at night. Kit features detailed cockpit and instrument panel, detailed radial engines, rotating propellers, and authentic decal sets.


1/72 VAMPIRE F MK3Post-war power

Developed during WWII, the de Havilland Vampire was one of the �rst jet-powered aircraft to enter service with the RAF. Acclaimed as one of the fastest and most reliable jet engine aircraft of the era, the de Havilland Vampire was used by dozens of countries and in service well into the seventies. Kit features twin boom fuselage, detailed under carriage, 2 auxiliary fuel tanks, cockpit with instrument panel, and decals for two versions.


1/48 JUNKERS JU 88 A-4Improved for invasion

It’s not going to be like last time. The wings are longer. There’s more guns and better ones. Even the engines are more powerful. Sure, the A-1 came in hard and the undercarriage crumpled like tinfoil, but this is an A-4. Sure. The ache from the pilot’s recently mended leg comes back as he watches the ground crews load extra bombs in the new external racks. A polite cough from the copilot brings him back to the pre-�ight checklist. It’ll all be �ne. Sure. Kit features rotating propeller, detailed cockpit, two detailed engines, detailed machine guns, and decals.

03935 RVLS3935 Total Parts: 286 Skill Level: 4 Length: 11.8 in Wingspan: 16.5in (419mm)

1/144 EMBRAER 190 LUFTHANSAFlights to the sights

Short-haul aircraft like the ERJ 190 make jet setting off to scenic locales less of a dream and more of a reality for thousands of people around the world every day. Embraer, the manufacturer, is based out of Brazil and this particular model of their sleek, twin-engine aircraft seats one hundred passengers. Lufthansa is one of the largest airlines in the world with hundreds of aircraft and destinations around the globe. Kit features replica cockpit, detailed undercarriage, and full Lufthansa decals.


1/100 BELL AH-1G COBRADevastating the jungle

The landscape speeds by below, thousands of acres of jungle, river, rice paddies, huge hills, small villages, and, somewhere ahead, the objective. The job is clear. Support the landing zone with rockets, gatling gun �re, and 40mm grenades. What’s not clear is how the gunner is supposed to see anything to hit with all the cover everywhere. Tracer �re arcs up from beneath the canopy. Here we go again. Kit features rotating main rotor, missile pods, minigun, and authentic decal sets.

04954 RVLS4954 Total Parts: 52 Skill Level: 3 Length: 5.4 in (137mm) Rotor Diameter: 5.3 in (135mm)

1/100 SH-60 NAVY HELICOPTERHug the waves

These aircraft have been tried and tested in virtually every theater of US con�ict since the mid-nineties. SH-60 Seahawks are modi�ed versions of the UH-60 Blackhawk designed for use aboard US Navy vessels. Their main modi�cation is a foldable tail that allows more to be stored aboard ships. Throughout their versions, they accomplish an astounding array of missions for the Navy. These include anti-submarine warfare, anti-surface warfare, search and rescue, cargo transport, reconnaissance, and more. Kit includes rotating main rotor, two torpedoes, and decals.

04955 RVLS4955 Total Parts: 53 Skill Level: 3 Length: 5.8 in (148mm) Rotor Diameter: 6.2 in (157mm)

1/300 GERMAN FRIGATE CLASS F122Backbone of the German Navy

F122 Bremen Class Frigates were the pride of the German Navy for three decades. All eight vessels served as convoy escorts during the trying days of the Cold War. Their chief role is hunting subs, but they have extensive anti-air and anti-surface capabilities, as well. Currently, �ve of the eight Bremen Class vessels have been replaced by the upcoming F125 class but the remaining three continue to participate in anti-piracy missions and in anti-terrorism operations. Kit features two piece hull, missiles, 76mm gun, helicopter, and decals for all eight F122 class vessels.

05143 RVLS5143 Total Parts: 235 Skill Level: 4 Length: 17 in (433mm)

1/720 HMS ARK ROYAL AND TRIBALCLASS DESTROYERHunter of the BismarckArk Royal was one of the �rst aircraft carriers to be built with �ight deck and hangar bays incorporated in the hull structure of the ship. She was the linchpin of several crucial actions in the early days of WWII, plus, she was a spectacularly lucky ship. Obsolete Sword�sh torpedo bombers from Ark Royal enabled the Royal Navy to sink the German Battleship Bismarck. In 1941, Ark Royal was struck by a torpedo off Gibraltar and sank. Fortunately, all but one of her over 1,000 crewmen made it to safety. Kit features Ark Royal and a Tribal Class Destroyer with stands.

05149 RVLS5149 Total Parts: 110 Skill Level: 4 Length: 13.5 in (343mm)

NEW RELEASES

6 Tech Support 217-398-8970May 2017 ❘ Products for everyone! 7www.gpdealer.com ❘ May 2017

ww

w.re

ve

ll.co

mw

ww

.re

ve

ll.c

om

1/25 ‘58 CORVETTE ROADSTERFleet �fty-eight

Fast cars, no tops, high octane, and an open road: it just didn’t get any better in the �fties. The war was over, the good times were back, and returning GIs were more than eager for something to blow their hair back. 1958 Corvette Roadsters were the perfect mixture of power and thrill. They set a new trend in automotive design, making everything else on the road look old and outdated. Plus, they helped establish a legacy of excellence for Corvette that has carried through to today.

07037 RVLS7037 Total Parts: Skill Level: 4

1/32 VW BUGGYBump down to the beach!

With the radio on, the ocean breeze blowing in through the open top, and the tires sliding loose over the warm sand, Monday is a millennia away. Building a dune buggy on this old VW chassis was the best decision ever. Now, every day is a sun day. Kit features easy to build construction kit of a 1960s buggy with rotating wheels and various registration plates.

07682 RVLS7682 Total Parts: 22 Skill Level: 3 Length: 4.5 in (115mm)

1/72 CHURCHILL MK.I/II & DAIMLER MK.II “DIEPPE RAID” (TWO KITS)Barely on the beachWaves pull the oil back out over the surface of the Atlantic. Steam hisses from red hot fenders. Black smoke curls from burning wrecks, driving the gulls back from the quiet port of Dieppe. From tideline to uncrossable sea wall, crumpled forms lay where they fell. 100, 200, 1,000... who can say? Like maple leaves in autumn, the Canadians are strewn across the shingle beach. Grey uniforms lead the shackled, shattered, khaki-clad remnant towards the rear. Kit features a Churchill and Daimler armored car specially modi�ed and with decals for the Dieppe Raid.

30043 HSGS0043 Total Parts: 56/50 Skill Level: 3Length: Churchill: 4.1 in (104mm); Daimler: 2.2 in (65.5mm)

1/24 SUBARU IMPREZA WRX 1993 RAC RALLYImpressive Impreza

It may not look like much, but the Subaru Impreza has been driven to several key rally victories including the Wales Rally GB. Colin McRae took it to three impressive victories in that rally. Ari Vatanen has achieved one so far. This challenging rally features sections in forests and in front of grandstands on sweeping estates. The incredibly varied driving conditions present an almost unique test to drivers and vehicles alike. This limited edition kit features decals for 1993 RAC (Wales Rally GB) Rally drivers Colin McRae and Ari Vatanen.

20297 (Limited Edition) HSGS0297 Total Parts: 133 Skill Level: 3 Length: 7.3 in (185mm)

1/24 NISSEKI TRUST PORSCHE 962CAll Japan auto

Porsche has created countless competitors over the years. However, the 962C remains one of the brand’s best designs over thirty years after its original release. The 962C competed in 1989’s All Japan Sports Prototype Car Endurance Championship, where it took on Fuji Speedway’s ten taut turns and impressive 0.9 mile (1.5 km) long straights. This limited edition kit features one set of decals for Nisseki Trust Racing Team Car number 100.

20298 (Limited Edition) HSGS0298 Total Parts: 61 Skill Level: 3 Length: 7.9 in (200 mm)

1/72 MESSERSCHMITT ME262V056 & ME262B-1A/U1 “NACHTJAGER”Kurt’s craftsMe262s were some of the �rst and fastest early jet aircraft. Germany �elded increasing numbers of them, late in the war, with large radar arrays on the nose and heavy weapons for taking down the bombers wreaking havoc on the Rhineland. Kurt Welter was one of the most successful pilots of the Me262 at night, with 56 victories recorded at night. This limited edition kit combo features two aircraft with four sets of decals including two Kurt Welter decals.

02236 (limited edition) HSGS2236 (2 Kits) Total Parts: 58 + 57 Skill Level: 3 Length: (both): 5.9 in (151mm) Wingspan: 7.3 in (185mm)

1/72 MITSUBISHI F-2A/B TSUIKI SPECIAL 2016(2 KITS)Straight over the sea

The Mitsubishi F-2B may not be the most famous �ghter around, but it is certainly one of the most impressive. The F-2 has the distinction of being the �rst military aircraft equipped with Active Electronically Scanned Array (AESA) radar. Its wing area is also 25 percent larger than other �ghters in its class. These advantages make the F-2 a key element of the JASDF units based at Tsuiki Air Base. This limited edition kit combo features two sets of decals for 8th AW aircraft at Tsuiki Air Base.

02237 (Limited Edition) HSGS2237 (2 Kits) Total Parts: 128 + 129 Skill Level: 3 Length: 8.2 in (209 mm) Wingspan: 6.1 in (156mm)

1/72 QF-4E PHANTOM II “USAF FAREWELL”Decades of domination

For nearly sixty years, the Phantom II has served with the United States Air Force and the air forces of countries all across the globe. It set multiple world records in its tenure, is the only aircraft to serve with both the USAF and USN aerobatic display teams, and was operational in combat zones from Vietnam to Desert Storm. As of 2017, that long and storied service is coming to a close. This limited edition kit features decals for the �nal �ight of the Phantom.

02238 (Limited Edition) HSGS2238 Total Parts: 130 Skill Level: 3 Length: 10.4 in (265mm) Wingspan: 6.4 in (163mm)

8 Tech Support 217-398-8970

ww

w.g

pd

ea

ler.

co

m

May 2017 ❘ www.gpdealer.com ❘ May 2017Products for everyone! 9

ww

w.g

pd

ea

ler.c

om

NEW RELEASESNEW RELEASES

1/72 B-24 LIBERATOR MK.III/V COASTAL COMMANDClosing the gapIt’s a long, long way from New York to Liverpool. In WWII, that open expanse of ocean was a death trap. Nazi U-Boats prowled just beneath the surface from coast to coast, sinking vessels by the ton. RAF Coastal Command was given the nearly impossible task of regaining control over the huge “Atlantic Gap”. Some of the best aircraft for this mission were the B-24 Liberators. These bombers, with their immense range and payload, enabled Coastal Command to extend protection for convoys far out into the Atlantic. Limited edition kit features two sets of decals.02241 (Limited Edition) HSGS2241 Total Parts: 202 Skill Level: 3 Length: 11.4 in (290mm) Wingspan: 18.3 in (466mm)

1/72 AREA-88 F-20 TIGER SHARK SHIN KAZAMAShintani’s shark!

Kaoru Shintani’s action-packed manga, Area-88, debuted in 1979. It was an instant hit, exciting readers with the exploits of Shin Kazama, a mercenary �ghter pilot stationed at a top-secret air base called Area-88. Tiger Sharks are absolutely perfect for the intense action Shin Kazama gets into. The series, which was praised for its white-knuckle dog�ghting action, inspired multiple animated �lms and a television series. This limited edition kit features decals for Kazama’s aircraft in the Kingdom of Arslan Air Force.


1/24 WILD EGG GIRLS PKW.K1 KÜBELWAGEN TYPE 82 “CLAIRE FROST”All-terrain awesomeThe Egg Plane Girls really know their transportation! The Kübelwagen is an all-terrain icon made infamous by the Germans during WWII. It followed German advances through Poland, France, North Africa, and into Russia. It followed the withdrawals, too. Its reliability was greater than that of virtually every other vehicle available to the Wehrmacht. By war’s end, over 50,000 had been produced and many destroyed. Kit features two sets of decals and Claire Frost �gure.

52160 HSGS5260 Total Parts: 185 Skill Level: 3 Length: 6.4 in (161.5mm)

1/48 NAKAJIMA KI27 TYPE 97 FIGHTER4TH REGIMENTFly for the 4thNakajima Ki-27 �ghters were exceptionally nimble, able to make tight turns and perform aerobatics other aircraft simply couldn’t. Unfortunately for their pilots, they also completely lacked armor and safety features. Nevertheless, they were a dangerous opponent in both the Sino-Japanese war and Japan’s pre-WWII con�ict with Russia. By the end of WWII, with the situation rapidly deteriorating, Japan committed its remaining Ki27s in suicide and suicidal attacks. This limited edition kit features decals for IJAAF 4th Flight Regiment aircraft.07451 (Limited Edition) HSGS7451 Total Parts: 46 Skill Level: 3 Length: 6.1 in (154mm) Wingspan: 9.2 in (234mm)

1/48 F-16C BLOCK 52 ADVANCED TIGERDEMO TEAMFalcons for the �ght

Fast, agile, and heavily armed, the F-16 is the aircraft of choice for dozens of nations. Poland uses them for their aerobatic demonstration team “Tiger Demo Team”. Thirty six “C” types are in service with the Polish Air Force, supporting the aging �eet of MiG aircraft left over from the Soviet days. This limited edition kit features decals for an F-16C from the Polish Air Force aerobatic demonstration team “Tiger Demo Team”.


1/32 MESSERSCHMITT ME163B KOMET “EJG2”Germany’s revolutionary rocket-powered �ghter!

Designed by Alexander Martin Lippisch in the early 1940s, the ME-163 Komet remains the only rocket-powered aircraft to ever become fully operational. During a 1944 �ight, test pilot Rudy Opitz reached an astonishing 698 mph. However, the aircraft’s brief seven-and-a-half minute �ight times made it an ineffective �ghter. An estimated 370 Komets were produced before WWII’s end in 1945. This limited edition kit features new resin parts plus two sets of decals.


1/24 MAN 26.321 FORMEL SIX SEMI TRUCKHeavy hauling

These trucks are equipped with the so-called six cylinder “Formula 6” engine which incorporates some of the most modern features of diesel engine technology. Our truck 26.321 is equipped with a lot of accessories which have become quite popular in Europe, such as special big horns, exhaust pipes, and other details which are copied from American trucks and which make Europeans trucks look much fancier. This truck has participated at the Trucker – Festival.

0756 ITAS0756 Total Parts: 278 + 10 tires Skill Level: 3 Length: 10.6 in (270mm)

1/72 MARTIN B-57B BOMBERThey won’t see it coming

Fear of invasion got you down? Those reds giving you the shakes? Duck and cover! And don’t worry, the aircraft of the 38th Bombardment Wing are here for you! Yes, these glossy black birds aren’t just for your local air shows. They’re based out of Laon-Couvron in Northern France with a very particular mission in mind: keeping the red menace where it belongs! Day or night, rain or shine, the brave aviators of the 38th stand ready to clear out the commies with all-new, super-effective nukes. Kit features four sets of decals.

1387 ITAS1387 Total Parts: 106 Skill Level: 2 Length: 10.9 in (277mm)

®


ww

w.g

pd

ea

ler.

co

m

NEW RELEASES®

ww

w.g

pd

ea

ler.c

om

1/48 F-4E PHANTOM IISixties standout

At its introduction, the Phantom II was a revolution in aviation design. It captured sixteen world records for �ight performance, but its practical application on the battle�eld was unquestioned as well. Leading off its list of combat features was an 18,000 lb effective weapons load – more than the four-engine B-17 of WWII. What the Phantom lacked in maneuverability, it made up for in sheer speed – breaking Mach 2 with ease. Kit features four sets of international decals.

2770 ITAS2770 Total Parts: 100 Skill Level: 3 Length: 15.7 in (400mm) Wingspan: 9.6 in (244mm)

1/35 STAGHOUND MK.1 ARMORED CARAmerican made, British driven

Though it was manufactured in the US, the Staghound never saw service with the US Army. Instead, it was sent to the British, originally for use in North Africa, but, after the end of Operation Torch, in Italy. As armored cars go, it was incredibly heavily armed and armored. Its 9-44mm of armor and 37mm gun made it virtually a match for the early Panzer III prototype tanks Germany �elded in Poland. Kit features British, Belgian, Australian, Polish, and Italian decals plus photo etched parts and a metal gun barrel.


1/72 SD.KFZ.166 STURMPANZER IV “BRUMMBÄR”Designed to destroy.Put a casemate mounted 150mm gun on top of a Panzer IV chassis and you get the Sturmpanzer IV. Germany only made around 300 of these vehicles, but they were brutally effective wherever they went. Their �rst engagement was at the Battle of Kursk – a bitter and costly defeat against thoroughly dug in Russian forces. As the situation deteriorated, Brummbär assault guns were rushed to hot spot after hot spot including Anzio, Warsaw, and the Battle of the Bulge. Kit features decals for multiple WWII versions.


AMT® 1/25 Volkswagen Beetle Superbug GasserV is for VROOMThis super souped up Superbug Gasser is superb! It’s been out of print since the seventies, but it’s back now and ready to roar! It’s loaded with expanded decal artwork, optional tinted windows, gleaming chrome parts, and more. Everything is included, right down to the tires and a special reproduction of the original fold-together drag strip display base! If you’re looking for some vintage vroom, look no further! This VW isn’t just good, it’s wunderbar! Kit features custom VW body, pad-printed tires, full decals, display base, backdrop, and vintage packaging.

AMT1044/12 AMTS1044 Skill Level: 2

AMT 1/25 Silhouette Show Car/Trailer Hot WheelsMore than a rough outline

The Silhouette is back on tour! This fully enclosed, futuristic, bubble-top-style car is back and better than ever! It’s even equipped with a parachute pack the vintage kits were missing. Plus, you can build it in one of three versions: stock, drag, or custom! Kit features three versions, pad printed tires and slicks, vintage decal graphics, vintage packaging, tilting bubble top, and more!

AMT1045/12 AMTS1045 Skill Level: 2

Bandai® 1/144 Slave I Star WarsHunting in the starsBoba Fett is one of the baddest of the bad. His larger than life reception is unparalleled for a character with so little actual screen time. His ship, Slave I, is virtually as iconic as the X-Wing. This vessel is a modi�ed patrol craft that’s feared across the galaxy. Even Han Solo takes a ride in it on his way, frozen in carbonite, to Jabba’s palace.

200638 BANS0638

Bandai 1/144 Millennium Falcon Star Wars The Force AwakensBack homeBy the time of “The Force Awakens”, the Millennium Falcon has really seen better days. It’ll still make the Kessel Run, but it takes a few more parsecs. Nevertheless, the Falcon (as piloted by Rey, Finn, and the, not quite legitimate but, longest standing owners, Han and Chewie) is a force to be reckoned with. With it, the heroes manage, once again, to stave off the minions of the Dark Side. Kit features display base, rear engine effect part, 1/144 scale Finn, Rey, Han Solo, and Chewbacca, clear and frame canopies, open or closed hatches, landing gea, and full decals.

202288 BANS2288 Total Parts: 10 Runners Length: 9.5 in (241mm)

Bandai No.10 Ultra Hawk III Ultraman Mecha CollectionSave the planet!Ultraman has a swift conveyance for getting to the places of the world most threatened by the insidious enemies of us all; this conveyance of course being of superior, speed, style, and most importantly strength for ensuring that the monstrosities, aliens, and mutated beings that would otherwise destroy us are stopped by that peerless, matchless hero, Ultraman. Yeah! Kit features missile launchers, display stand, and decals.


Bandai 1/144 AT-AT Star WarsPew-Pew! Pew-Pew!Imperial Walkers are the most devastating land vehicles in the galaxy. At the Battle of Hoth, they completely routed the rebel forces and almost succeeded in crushing the rebellion then and there. Incredibly heavy armor and weaponry made the walkers virtually impervious to damage while they were able to deal out extensive hurt. Fortunately for the rebels, AT-ATs had weaknesses on the legs and the underside of the troop compartment. Kit features snow themed display base, laser effects parts, leg dampers, pilots, articulated head and legs, and laser guns.

214476 BANS4476 Total Parts: 6 Runners Height: 6.3 in (160mm)


ww

w.g

pd

ea

ler.

co

mw

ww

.gp

de

ale

r.co

m

Bandai 1/100 Bael Gundam IBO Full MechanicsCleared for combatAccording to Gundam Iron Blooded Orphans canon, Bael was built over 300 years prior to the events of the second season in the midst of the “Calamity War”. There, it helped save humanity from destruction with �ashing twin swords. Today, it’s piloted by McGillis Fareed in service to Gjallarhorn. Even after 300 years in storage in the Gjallarhorn vaults, Bael is a deadly threat to any who oppose it! Kit features two blades, open hands, clenched hands, dedicated hands, foil sticker, and full instructions.

214481 BANS4481 Total Parts: 12 Runners Height: 7 in (178mm)

Bandai 1/48 AT-ST Star WarsEnded by Ewoks on EndorThe AT-ST is the second iconic Imperial walker of the Star Wars franchise. It’s heavily equipped with armament, but its armor is famously vulnerable to everything… including sticks and stones. It’s also vulnerable to tripping via vine rope. All in all, it really explains why Imperial forces prefer to blow up planets rather than �ghting on their surface. Nevertheless, the AT-ST �lls several key roles at critical points in the original trilogy. Kit features detalied, articulated legs, rotating head, weapon systems, pilot �gures, movable view ports, opening hatch, themed display base, laser effect parts, and full instructions.

214869 BANS4869 Total Parts: 6 Runners Height: 7.2 in (183mm)

Bandai “Love Live! Sunshine!!” Figure-rise BustsShine with us!All nine Aquors members from “Love Live” are now available as model kit busts. They are intricately designed to capture the unique, cute features of each member. Even their eyes are made with layered injection technology to give lustrous, different eye colors to each model. A unique background plate is included with each model and you can connect all nine to form one cool background! Choose from Tsushima Yoshiko (BANS5624) and Ohara Mari Yoshiko (BANS5629). Kit features background plate, decoration plate, and display stand.

215624/8 BANS5624/8 Total Parts: 6 Runners Height: 5.1in (130mm)

Bandai 1/100 Providence Gundam Seed MGArmed to extremesIf outrageous armament is your thing, then Providence is your Gundam. Its DRAGOON system, mounted in its huge backpack, carries nearly a dozen remote weapon pods that mount over forty beam guns. That’s just on the backpack. The suit also includes close in weapons system guns, a shield with even more beam guns, a beam saber, and a large beam ri�e. Add the phase armor of the unit to that armament and it’s clear why pilot Rau Le Creuset very nearly accomplishes his aim—exterminating all humanity. Kit features Judicium beam ri�e, composite armed shield system, DRAGOON launch recreation struts, clenched hands, open hands, gun hand, open-hole clenched hands, saber effect part, display stand, stickers, and full instructions.215629 BANS5629 Total Parts: 17 Runners Height: 7in (178mm)

Bandai 1/144 Gundam Vual IBO HGHammer time!Armed with a gigantic hammer for extreme close-combat kills, the Vual Gundam is a superior breed of predator. It was manufactured by Gjallarhorn and one look at it will show you that it’s a lethal close-quarters combatant. Dual shields give it superior defensive capabilities while its agility and the extreme force of its weapon make it an outstanding offensive platform. For targets at range, it’s even equipped with a 210mm antimatter ri�e. Kit features mining hammer, Spartan shield, shoulder shield, glaive, sticker, and instructions.

215630 BANS5630 Total Parts: 6 Runners Height: 5in (127mm)

Bandai Zeta Gundam Z HGZ 1 4 UFrom the Zeta Gundam chapter of the Gundam series comes the titular Zeta Gundam. It’s signi�cantly more advanced that the gundams that came before it in the series, with powerful armor, engines, and weapons. It can really deal out or take major battle damage. True fans of the earlier iterations of the Gundam franchise can’t afford to miss out on this kit! Kit features beam ri�e, arm-mounted grenade launchers, hyper mega launcher, twin beam sabers, shield, wave rider joint, stickers, and full instructions.


Bandai 1/1000 Yunagi Combined Cosmo Fleet“Space Battleship Yamato 2202”The Earth Fleet is back and ready for action! This set includes vessels, including Yunagi, which appear in the feature �lm. They’re highly detailed, faithfully recreated, and ready to roar into action! Kit features three ships, three display stands, foil stickers, decals, and full instructions.

215636 BANS5636 Total Parts: 6 Runners

Bandai Android Dragon Ball Figure-Rise SetsDestructive DuoWe have both Android #17 (BANS5638) and Android #18 (BANS5639)! Every fan of the Dragon Ball Z franchise needs this destructive duo in their collection! They played an unforgettable role in the Cell Saga, stymying the efforts of the Z Fighters while, inadvertently, adding to the power of the most sadistic villain to ever stalk the Dragon Ball universe! Be sure to get both kits, twins should never be separated! Features Barrier and Kikoha parts, plus normal and angry faces, clenched hands, open hands, gun-wielding right hand, sticker, and full instructions.

215638/9 BANS5638/9 Total Parts: 8 Runners Height: 6.1in (155mm)

Bandai 1/144 Gold Frame Amatsu Mina GUN Seed RG“Black Angel”Stop for a minute and just take another look at this thing. Forget storyline or specs, or who piloted it. This thing is just cool. Without a doubt the absolute baddest Gundam to hit the lineup so far. With those scorpion tail-like claws and the incredible black on gold color scheme, it’s just pure metal awesome. Plus, it’s equipped with a devastating array of weaponry that makes a normal mobile suit look like a tin can.


Bandai 1/72 Y-Wing Star Fighter Star WarsAn old one but a good oneY-Wings have been around since the time of the Old Republic in Star Wars lore. They were used in the stories surrounding the Clone Wars and have cropped up ever since in various forms with differing functions. Their tendency to be retro�tted, modi�ed, and upgraded makes them the quintessential rebel vehicle, even if they are somewhat less famous than the ubiquitous X-Wing. Build this Y-Wing and modify it to suit your favorite time period in Star Wars! Kit features display base, laser effect part, pilots, clear/frame canopy, landing gear, decals, stickers, and full instructions.



ww

w.g

pd

ea

ler.

co

mw

ww

.gp

de

ale

r.co

m

Bandai 1/144 Spr Fumina Axis Angel Ver GUN BF HGPretty in pinkDeveloped by Minato Sakai in Gundam Build Fighters Try to resemble his crush Fumina Hoshino, the Super Fumina is a Gundam designed to be deadly and aesthetically pleasing. It’s unclear in the anime whether the real Fumina is �attered by a towering depiction of herself which sheds its armor/clothing as it sustains battle damage. Nevertheless, the model is a sure conversation-starting work of art! Order your Axis Angel today! Kit features display stand, beam ri�e, lances, clenched hands, open hands, sticker, and full instructions.


Bandai 1/100 RX-78-02 GUN The Origin Spec Ed MGThe original

RX-78 was the very �rst mobile suit in the Gundam franchise, and its basic design and look has stood the test of time. This kit is a revitalized version of the original Master Grade model with accurate proportions and full armament.

216898 BANS6898

Bandai 1/100 Providence Limited Edition Gundam Seed MGArmed to extremesIf outrageous armament is your thing, then Providence is your Gundam. Its DRAGOON system, mounted in its huge backpack, carries nearly a dozen remote weapon pods that mount over forty beam guns. That’s just on the backpack. The suit also includes close in weapons system guns, a shield with even more beam guns, a beam saber, and a large beam ri�e. Add the phase armor of the unit to that armament and it’s clear why pilot Rau Le Creuset very nearly accomplishes his aim – exterminating all humanity.

217166 BANS7166

Lindberg Models 1/32 Coca Cola Gee Bee RacerMore Zip!

What could possibly give you more zip than the 300mph capable “Gee Bee” Racer? How about a Gee Bee Racer with a sweet, zippy, Coca Cola livery? The Gee Bee has been around since the 1930s while Coke is even older than that, but both will send you �ying! Kit features authentic surface details and is molded in yellow with full color Coca-Cola® logos.

HL515/12 LNDS0515

Moebius® 1/8 Armored Batman “BvS” ResinPoised to pounce!This model is based on digital effects �les from Batman vs. Superman Dawn of Justice and mounted on a detailed battle-scene base for a diorama-like effect! All three kits in the line can be grouped together or posed separately. Here, Batman prepares to deliver a crushing, kryptonite-backed blow and is heavily armored to boot! Kit features superior detail, precision-tooled resin, detailed base, and simple assembly.

1013 MOES1013 Skill Level: 2 Height: 14 in (356mm)

Moebius 1/8 Superman “BvS” ResinModel the “Man of Steel”This model is based on digital effects �les from Batman vs Superman Dawn of Justice and mounted on a detailed battle-scene base for a diorama-like effect! All three kits in the line can be grouped together or posed separately. Superman doesn’t need armor or weapons. He’s here, ready to �ght with bare �sts and total assurance of invulnerability! Kit features superior detail, precision-tooled resin, detailed base, and simple assembly.


Moebius 1/8 Wonder Woman “BvS” ResinGreece’s most famous goddessThis model is based on digital effects �les from Batman vs. Superman Dawn of Justice and mounted on a detailed battle-scene base for a diorama-like effect! All three kits in the line can be grouped together or posed separately. Wonder Woman is the lasso-wielding femme fatale of the superhero world and the unnamed but essential completion of the Batman vs Superman big three. Kit features superior detail, precision-tooled resin, detailed base, and simple assembly.


Moebius 1/25 1952 Hudson Hornet Mel’s Drive-InSink your teeth in nostalgiaFifties roadside diners and classic roadsters go together like fries and milk shakes. Popular as places to hang out, eat and just generally have a good time; drive-ins are a uniquely American experience. Mel’s Drive-In is the quintessential representation of Americaís infatuation with travel, cars and fast food. Check out old pictures of a Mel’s Drive-In and you’re virtually guaranteed to see a Hudson Hornet in the lot. Vintage Mel’s Drive-In box art makes a striking addition to this exception 1952 Hudson Hornet kit.

1216 MOES1216 Skill Level: 3

Tamiya 1/35 British Infantry Tank Mk.III ValentineBe my Valentine!There’s some debate about where the name came from, but there’s no question that the Valentine tank served with distinction. Thousands rolled off production lines in the UK and Canada and found themselves in North Africa slugging it out with German and Italian troops. Others were shipped via Lend-Lease to the Soviet Union to help drive the Germans back. Kit features separate side skirts, intricate suspension, open or closed hatches, two realistic �gures, and two sets of marking options.

35352 TAMS5352 Length: 6.2 in (157mm)

Polar Lights® 1/25 Bobby Allison 1969 Coca Cola Mercury CycloneJust for the race of it

Sleek and fast cars like the Mercury Cyclone put expert racers like Bobby Allison over the �nish line time and again in the sixties and seventies. Plus, this car comes with a cool Coca Cola livery to accent the coke bottle body styling! This limited edition kit features detailed parts, cool decals, and full instructions.

PPL948/12 PPLS0948


ww

w.g

pd

ea

ler.

co

m ww

w.g

pd

ea

ler.c

om

20100N LATB20011/25 Mare Nostrum

SC323/48 RDZW0323X-Traction Muscle Cars

30212 LATY3212Ferris Wheel

30213 LATY3213Globe

30215 LATY3215Spit�re

30216 LATY3216P51 Mustang

30220 LATY3220Fokker DR.I

Trumpeter 1/35 African Freedom Fighters Figure Set (6)Freedom for whom?Wars are inherently dirty, but civil wars are the dirtiest wars of all. In a modern setting, insurgent armies rarely have the manpower or the munitions to �ght a standing army head on. Instead, they frequently focus on soft civilian targets; doing whatever it takes to make sure that their demands are heard. In the end, history is left to answer the question “was it all worth it?” Kit features six freedom �ghter �gures in various poses with 12 AK-47 assault ri�es and one RPG7.

438 TSMS0438 Total Parts: 60+

Trumpeter 1/72 Russian BTR-70 APC Early/Late VersionsAgile and armedOn August 21, 1972, the eight-wheel BTR-70 armored personnel carrier was accepted into service in the Soviet Union and the Warsaw Pact countries. Improvements over its predecessor included heavier armor plating and tires less prone to puncture. Plus, a more powerful engine and a pair of machine guns gave it both extra power and extra punch. Further developments lead to many more variants including the Early (TSMS7137) and Late (TSMS7138) time period versions. Both kits feature full decals.

7137/7138 TSMS7137/7138 Total Parts: 70+ (7137); 80+ (7138) Length: 4.1 in (105mm)

Latina 1/25 Mare NostrumFish “Our Sea”

❚ Detailed scale Mediterranean �shing trawler ❚ Ice lockers, small cabins, detailed engine, and more! ❚ Digital booklet with step-by-step instructions included ❚ Printed 1:1 plan of the model ❚ Brass parts, metal capstan, and metal engine ❚ Stand included ❚ Length: 16.1 in (410mm), Height: 10.6 in (270mm)

Artesania Latina ART&WOOD ModelsIt’s time you built something beautiful.

❚ Laser-cut, eco-friendly plywood parts. ❚ Photo-etched decorative parts. ❚ Exhibition base with name plate. ❚ Decals. ❚ Easy to follow instructions.

Auto World X-Traction Muscle Cars USA Release 20 (12)Roar down the track!

❚ 1/64 Scale slot cars ❚ 2 Neodymium traction magnets in each ❚ 1987 Buick Grand National ❚ 1969 Chevy Camaro 50th Anniversary ❚ 1970 Dodge Challenger ❚ 1971 Chevy Camaro Race Car 50th Anniversary ❚ 1971 Plymouth GTX ❚ 2017 Ford Mustang GT

Long story short...

Artesania Latina ART&WOOD Models deliver simple elegance and riveting detail in a light, easy to assemble, eco-friendly form. With a creation for every passion, the ART&WOOD series makes the perfect gift for fans of modeling and vintage art!

Documents

NEW MONSTER TRUCK FUN FOR EVERYONE!downloads.hobbico.com/greatnews/2017/2017-05-great-news.pdf · 30+ mph! Fully assembled, fully loaded and ready for action! Everything you need