NEW ITEM!

M2HB dress up kit flash hider,carrying handle. Barrel cover.

$74.50 M2HB280

We have most parts for the M3 .50 cal machine guns. Both in new G.I. and also “deco”condition. Email or call Dave for

your needs

.50 BMG M2HB REAR SIGHT ASSY

G.I. brand new $175.00 M2HB051

We always have M10 chargers in stock. We also have M10 charger parts

1. .50 cal chuting - email Dave2. .50BMG barrel erosion gage #727-4725 ....$300.003. 100% new G.I. .50 stripped bolt in original G.I.

wrappings .............................................$695.004. Aircraft barrel shrouds A. New M3 w/booster ............................$200.00 B. Used ANM2 w/front bearing ..............$125.00 C. New M3 w/booster, some pitting ......... $65.00 D. Exc. to new ANM2 w/front beari .......$200.005. Backplate grip nut spanner tool .............. $22.506. Barrel Carrier Assy .................................. $39.507. Bore erosion gauge 4933-317-2503 new .. $99.508. Broken Shell Extractor, lever type............ $24.959. Cleaning Rod, G.I. one piece rod. The best! M2HB042

............................................................... $14.9510. Complete M19 .50 cal M2HB Blank Firing Device. This is one cool one. In the new G.I. silver bag M2HB309 ...............................................$595.0011. Complete set of rivets for a .50 M2 receiver, (74

small and 6 big rivets) ............................. $49.9512. Flash Hider Assy ..................................... $37.5013. G.I. tool for removal of M2 .50 backplate screw &

also as a bonus removal of water cooled M2 .50 packing gland. M2HB240 .......................... $16.50

14. Grip firing handle for M3AA mount #B290191, New ............................................................... $45.00

15. Link catcher bag with zipper button snaps on to cradle assy – new G.I. M2HB279 ............... $35.0016. .50 cal. M2 ratchet chamber cleaning brush

M2HB143 ...........................$5.95, 3 for $11.9517. M3 traversing T&E bar MNT031 ............... $75.00 18. M3 tripod pintle lock assy MNT075 ........... $50.00 19. Original .50 cal M2 watercooled link bag D34388 ........................................................ $99.95 ea.20. Orig. M85 barrel – fair bore VG out........$495.0021. Sideplate trigger (M63 mount) ................. $75.0022. Steel night vision scope mount for all Brown in .50 cal stock # 5855-911-0703. Clamps on to gun. Also good to mount a scope ............................ $99.9523. WWII belt holding pawl pin ...................... $15.0024. WWII trigger bar pin ................................ $15.0025. Water cooled .50 bronze barrel bushing for trunion

............................................................... $65.0026. Wrenches (2) for .50 cal water cooled – orig G.I. holding plus adjusting wrenches for adjusting the breech end packing gland M2HB283 ......... $49.9527. .50 G.I. late ammo can holder for all .50 cal mounts, new MNT025 ..........................................$175.0028. .50 BMG M3 Tripod, T&E Mechanism, GI, VG-Exc MNT022 .................................................$195.0029. .50 cal M3 tripod mount hood M2HB171 ................................................. $14.9530. .50 cal spare barrel cover U.S M2HB093 ................................................. $14.95

RARE AND HARD TO GET .50 BMG GOODIES

Note: The following .50 cal items are still available on our website.M2HB281 New backplate refurb kitM2HB267 Extended cover latchM2HB294 Ultimate dress up kitM2HB283 Watercooled tool kit

We still have our M2HB .50 cal survival packs (M2HB001) & our Survival Spring Kit (M2HB003).

Please check our website.

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

Phones Open: Mon - Fri, 8:30am – 5:00pm

Showroom Open: Monday - Saturday, 10:00am – 5:00pm,

Friday til 8:00pm

LIKE NEW! .50 CAL M2HB COMPLETE BACKPLATE ASSEMBLY With grips, trigger, bolt latch release, etc. $465.00 M2HB079

.50 CAL BMG M7 HAND LINKERSAvailable again! We had a long dry spell but found a lost lot and bought ‘em! Original G.I. in the grease out of the crate $74.95 ea M2HB038

50 CAL BRONZE BORE BRUSHES 5 for $9.95 M2HB129

UNIVERSAL SMG MAG LOADERUzi Sten, MP40, etc etc small quantity

$7.95 MAGLOAD006

U.S. WWII .50CAL MG EQUILIBRATOR CRADLE ASSEMBLY$249.50 Fits all U.S. cradle sockets. U.S. G.I. Part #704-6650 MNT002

.50 CAL INERT AMMUNITION FOR DISPLAY

Finally back in stock and cleaner & brighter than ever, this inert ammo looks great as the cases and projec-tiles are polished brass & copper. No holes drilled in the cases and the expended primers are still intact. Perfect for displays, military aircraft, or vehicles!Each round .......................$2.50 AM019Belt of 10 rds., linked .....$22.00 AM161Belt of 50 rds., linked .....$95.00 AM162(Be sure to comply with your State or Local regulations in the few States where they apply, when buying linked inert ammo)

U.S. PEDESTAL MOUNT SOCKETAccurate late production socket used to make pedestal mounts like the M25,M31, etc. for jeeps, half tracks and all sorts of custom mounts. Accepts standard USGI cradles. Comes with T-handle lock and pre drilled hole in base section for provid-ing another method of fastening the socket if you choose not to weld it to a pedestal tube. Bottom outside diameter @ 2-5/8" ........$85.00 MNT024

.50 CAL M2HB BARRELS, STELLITE$595.00 M2HB196

STELLITE .50 CAL BARREL M2, new manufacture ‘contract overrun’

$1100.00 M2HB330Brand new .50 M2 MG Parts –

See our website!

TM1055-213-25 THE CLASSIC .50 MANUAL

With all the exploded views and tech data .......................................$12.95 SB021

G.I. ANM2 OR M3 AIRCRAFT BARRELDummy gun grade - ok outside ...................................... $75.00 M2HB253

B3

www.e-sarcoinc.com

WANTED TO BUY: .50 cal MG barrels. Any condition. Small or large quantity –

Call or email DaveNOTE to WASHINGTON STATE

RESIDENTS We CANNOT SHIP a part into Washington State that will work

only in a machine gun.

.50 M2HB RETRACTING SLIDE ASSEMBLIES

We have resolved the missing parts & now have comlete assemblies on the shelf.$325.00 ea. (few only) M2HB014

ARTICULATED MACHINE GUN CRADLE / MOUNTLove this mount! It has a base to bolt onto a vehicle, bunker or ship, wall or bulkhead. Torsion springs in the base provide strong adjustments for elevation or depression allowing for the cradle to lock at an angle or parallel to the ground. Cradle accepts .30 cal / .308 size machine guns and comes with attaching pins along with a plate mounted to the right side that was used for mounting a searchlight if needed. It is relatively light compared to similar equilibrator cradle mounts, but is made from steel and quite rug-ged. Left side has bracket for holding an ammo can tray. Would work well with Jeeps, armored vehicles and boats! From the base mount, it raises to about 12 inches high and with cradle attached, takes it up to about 16" in height. Original military item:........................................................................................................................................................................$225.00 MNT129

NEW ITEM!

M5 .50 CAL. R.C.E.Finally found some original ‘lever type’ .50 cal. M5 Ruptured Cartridge Extractors. Get em while you can! ....................$19.95 M2HB099

MACHINE GUN MOUNTS, AMMO CANS & MORE

LATE MODEL AMMO CAN HOLDERLate G.I...........$195.00 M2HB321

WWII .50 CAL AMMO CAN HOLDERS For vehicle mounts .................... $96.50 MNT065

BRITISH VICKERS AMMO CAN CARRIERCorrect .303 ammunition carrier for the Vickers tripod. Fits to the tripod in seconds and provides a historically correct method of connecting the ammo box to the right side of the gun mount .................................$90.00 VIC041

NEW ITEM!

BROWNING 1919A4 250 RD. PEDESTAL AMMO CANSteel pedestal can de-signed to attach directly to the 1919A4 Machine Gun by way of the left belt holding pawl bracket. Used throughout WW2 and common on Jeep pedestal mounts. Accurately made in steel........................................$65.00 A4282

NEW ITEM!

BROWNING 100 rd. AMMO. CANSteel can attaches directly to the standard 1919A4 MG left belt holding pawl bracket on the gun and affords use on the M2 tripod or on pedestal mounts. Best Price on the market ….. from the ones who invented it! ................$52.00 A4283

NEW ITEM!

U.S. 1917 BROWNING M.G. WATER CANAccurate new made steel water can used by infantry . This is the infantry ver-sion with the raised edge on the bottom to protect the drainage plug. Very limited! ....$90.00 A4275

NEW ITEM!

GERMAN MAXIM MG WATER CANSteel WWI designed water can used with both the Maxim 08 and 08/15 machine guns. Steel casing with solid brass spigot and brass water fill cap. Accurate copy of the original, but stronger steel used and resists dents and edge separation better than the original ..................................$85.00 MISC440

NEW ITEM!

EQUILIBRATOR / CRADLE AND AMMO TRAY ASSY #8367286 for the .50 cal BMG. This mount has a travel lock and equilibrator.......................... $325.00 MNT088

MG34 BRASS OIL CANSBrand new – beautiful ................ $9.95 3 for .........................$24.95 MG34107

MG34 BELTS & STARTER TABS50 rd belts Exc cond $5.95, 10 for $4.95 ea. MG34075 Starter tab $4.95 MG34011 Not for sale in New Jersey!

MG42 SLINGJust in the door – beautiful repro, complete$24.95 SLNG083

MG42 PISTOL GRIPSNew production – nice job! Will also fit Yugo

M53 $24.95 MG42010

BASKET MAGS$45.00 MG34014

German markings

NEW MG34 BARRELSA few more brand new Israeli MG34 barrels

8x57mm. The best MG34 barrels! $149.50 MG34002 While they last!

Special of the month $124.95

MG34/M42

1919 BROWNING M2 TRIPOD ASSY STIMULUS PACKAGEComplete tripod with T&E & Pintle MNT112 Note: Comes w/FREE G.I. tripod head cover

New Current Production

$345.00, 3 for

$995.00

.50 CAL MG PARTS & ACCESSORIES

WW2 1919A4 & B.A.R. CRADLEWith economy in mind, we can offer this great reproduction of the WW2 Cradle as used in Jeep dash mounts and pedestal mounts. Origi-nally used on the M25 pedestal mount with the M2 .50 cal. and 1919 A4, but generally used with the 1919A4 & BAR by use of separate sized pins. This is great for semi auto 1919A4s & BARs and is the perfect mount for those static non firing displays for vehicle collectors. The cradle is cast and we advise that if you are shooting class 3 machine guns, you should invest in a forged cradle and not a cast cradle. New made cradle with 1919A4/BAR pins/chains ..................................$89.95 MNT042

NEW ITEM!

1917A1 TRIPOD PROJECT KITKit w/Torch Cut Center ....................................$495.00 MNT086Kit w/Saw Cut Center ....................................... $595.00 MNT135Hundreds of these have been built. We got lots of good comments on ‘em. Check our website or previous ads for full description.

.50 CAL. M2 CLEANING ACCESSORY KITEssential parts to use in maintaining your M2 or M3 Browning .50 cal. machine gun. Have not had these in some time. Kit contains one each of the following:Bore Brush, Ratchet Chamber Brush, Brush, Fir-ing Pin Hole, Broken Shell ExtractorBrush, chamber & general cleaning M6M4 Cleaning Rod, Swab Holder1 Qt. of LSA cleaning oil $39.95 M2HB285

A metal worker project

Check our website for second grade parts for building dummy’s or other projects, or email or call

Dave to see if he has what you want - mgdave@sarcoinc.com

We still have .50cal BMG G.I. electric automatic linking machines new in the box.

See our website $2495.00 M2HB273

MORE .50 CAL GOODIES1. New G.I. .50 cal M7 cleaning rod case .......................................... $19.95 M2HB3022. New .50 cal RSG handle ..... $37.50 M2HB0723. .50 cal M7 Cleaning Rod w/Case .......................................... $35.00 M2HB2844. .50 cal M7 Cleaning Rod .......$19.95 M2HB274 5. Late M2HB Buffer, spool type ........................................................... $95.006. Ramo type QCB barrel extension ...................................................... $600.007. Ramo type QCB barrel handle & bracket assy .................................. $150.008. Ramo type QCB plastic barrel handle, plastic only .......................................$50.009. M3 Bolt Stripped, exc., new ...............$475.0010. M3 Bolt Complete, exc., new .............$675.0011. M4 Swab Section- this goes on the end of the M4 cleaning rod to clean out the bolt .............................................$6.95 M2HB26312. New G.I. M2HB back plate grips ...................................$12.50 ea. M2HB02013. RSG and Rear grips dress up your M2HB – 2 backplate grips and RSG handle, new ..........................................$49.95 M2HB15814. .50 cal RSG handle, used ..........................................$12.00 M2HB29615. 779-9739 Firing Protrusion Gage .........................................................$30.0016. 710-6326 Oil Buffer Rod gage ............$36.5017. 745-8406 Firing pin hole gage .......... .$22.5018. .50 Cal MG One pc cleaning rod/USGI orig ... $12.95 EA. OR 3 FOR $29.95 M2HB042

NOTE: .50 CAL DUMMY GUNProjects – We still have a few of some lower

grade parts for dummy guns – no more sets.

Email or call Dave for what’s available

MK19 GRENADE LAUNCHER FEED CHUTESteel feed chute with spring loaded latch points. These are like new and ready for installation. ...............$125.00 MISC529

CUSTOM MODIFIED M31C PEDESTAL MOUNTFor overseas defense sales. This model has more girth & strength than the standard M31C pedestal mount and it has a long internal screw allowing for the height of the mount to be extended so you are just not stuck with one size pedestal! This mount include socket and travel lock. Support brackets are installed if you want to add your own support legs ................................................$995.00 MNT138

ARMORED SHIELD W/CRADLEFrom M113 Armored Personnel carriers. Dee details on our website .................................... $995.00 MNT010

MK64 TRAVEL BAR FOR PEDESTAL MOUNTOriginal GI steel travel bar for keeping MGs and gre-nade launchers in place during vehicle movement. @16" overall length with wide end that fits Mk19, 1919A4, M2 .50 cal. bottom plates. Other end fits onto a pedestal shaft. Like new with some storage blemishes, but excellent................$75.00 MNT137

M2 .50 CAL. MACHINE GUN WATER JACKET

Very scarce today, these WW2 water jackets were used to shield the .50 cal barrel in water so that sustained fire could be achieved with longer bursts than the conventional M2 air cooled MG. Well re-membered on Battle Ships & Cruisers amongst other ships, and shore installations like Wake and Midway Islands. We only have one remaining. Jacket has sustained a minor dent on one side as shown above, and the sight and brass nuts have been removed from the water intake ports as well as the fluted muzzle ring. Great for a rebuild though, and the lugs on the breech end are in good shape $700.00 M2HB331

C350 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

www.e-sarcoinc.com

German Breadbag with strap and WW2 markings ..... $19.95

German A-Frame with WW2 markings.......$19.95 MISC404

German canvas leggings with WW2 markings .......... $17.95 MISC405

German MP40 pouch set: Two 3-cell pouches.....................$19.95 MP4009

MP44 Pouch set: Two 3-cell pouches.

$32.95 MP44005

Combat Pack—soldier canvas pack used with the A frame........$19.95 MISC406

German A- frame with Combat Pack ................. $37.95 MISC383

K98 Grenade Launcher Pouch with strap. Black leather .......$19.95 HOL117

German Splinter Cam-ouflage—A favorite of the Luftwaffe & Wehrmacht. Fabric can be used to make uniforms, tents, etc. Sold by the meter: 1 meter by @ 58" .. $20.00 MISC396German Wehrmacht Note Pad—Adjutant note pads copied from original. Size 7-1/8" x 4-7/8" .......$3.95 MISC296

German Rubber Stamp Set—set of 6 rub-ber stamps used by adjutants

WW2 Metal German Wall Plaques:SMALL REICH PLAQUE- wingtip to wingtip distance 15 inches

$22.95 MISC371, LARGE REICH PLAQUE- wingtip to wingtip distance 27 inches .........$49.95 MISC372

Mauser K98 Ammo Pouch.............................$9.95 ea, Pair for.........$18.95 MSR483

Mauser K98 RIFLE BOOKLET Reprint of original WW2 Ger-man manual..........................$6.95 SB171

MP44 Mag Loading ToolWill save your fingers the wear

and tear. Works with original and repro mags ......................$5.95 MP44003

MP44 GRIP SETSBeautiful repro MP44 grips–Just in! Made in wood just like the original $24.50 GRP141

German Dot-44 Cam-ouflage—A favorite of the Waffen SS. Fabric to make uniforms, tents, etc. 1 meter by 58" $20.00 MISC407

MISC403

MAKE YOUR OWN TENTS OR ZELTBAHN !

German Oakleaf Type B, Camouflage Material Oak leaf camouflage material as used by German SS forces during the WW2. The material is reversible so it is great for making tunics, trousers and Zeltbahns. Pattern Sold by the Yard. ..........................................$22.00 MISC460

GERMAN WW2 HELMET CARRIERWearing your helmet was arduous especially when you had to march great distances through Eastern Europe and the Russian plateau in the summer. Troops were happy to have a means to fasten their helmet to their gear so they could use their soft caps. Originally made in the late 1930s and used with the M35, M40 & M42 helmets. New made, in strong black leather with steel clips ..................................................$16.95 HLM036

GERMAN WW2 STICKGRENADE (Potato Masher)Accurately made in-ert German M1924 ‘Potato Masher’ grenade with remov-able base cap. The primary grenade used throughout the war by Infantry. Comes with markings. Excellent for re-enacting or static displays. Real wood lathe turned handle with steel head & cap ..........$24.95 MISC464

NEW ITEM!

GERMAN WW2 FIELD GEARSampling of quality uniform items for re-enacting or completing static

displays. We are pleased to include uniform camouflage fabric too! See our web site for more items.

FINNISH WW2 ANTI-TANK MANUAL Shows use of German weapons..........................................$7.00 SB169

GERMAN MP44 (STG) ‘BUTTSTOCK’ MANUAL REPRINT OF THE ORIGINAL GERMAN WW2 POCKET MANUAL IS-SUED WITH THE ASSAULT RIFLE This is the 1944 updated version usually carried in the buttstock trap with takedown tool and gas cylinder brush..$4.95 MP44009

REICH EAGLE STENCILSSteel stencils great for marking up boxes, vehicles and other WW2 display items. Two sizes available. Reusable, easy to clean and flexible. LARGE REICH EAGLE STENCIL, 13"x10"$22.00 MISC279 SMALL REICH EAGLE STENCIL, 9"x6" .........................$18.00 MISC280

WW2 GERMAN SPLINTER CAMO JACKET(Reversible for forest & snow camo) A favorite of the Wehrmacht & Luftwaffe troops! One side is German WW2 Splinter camo while the opposite is white for snow operations. Complete with waist belt and hood. New mnfr. Best Price around! $79.95. MISC472 Sizes- Large, X-Large, 2XL (specify when ordering)

GERMAN PANZERSCHRECK LAUNCHER SHIELDSteel replace-ment shield for the all of the German Panzerschrecks that came into the country without shields in the 1960s. This was essentially a blast shield and frequently left on the battlefield or discarded during heavy combat use because it sustained damage or was unwieldy. Our new made shield is stamped out of steel and has the glass hangers (no glass), brackets for camo, and barrel locking collar. No finish. Shield only. Best price on the market!.....................................$60.00 MISC461

WW2 GERMAN HELMET LINERDouble steel banded liner with German markings, leather lining, and correct M31 German Chinstrap with buckle and metal studs. Size is 7-1/2 inch (Large). Excellent replace-ment for worn or damaged liners in M35, M40 & M42 helmets ............................$21.95 HLM035

WWII GERMAN PANZERFAUST INSTRUCTIONSWe have accurately copied the original issue instructions provided to the soldier when issued the Panzerfaust 60 Launch-ers ....................................$5.00 SB170

SOLDBUCH (book). $6.75 SB168

GERMAN METAL HAND STAMPSMetal handstamps for imprinting leather, wood and soft metals with

iconic WW2 German markings com-monly found on issue items. Just like the original production and inspector

stamps!

DATE/MANUFACTURE CODE STAMP............................$65.00 STAMP05

WAFFEN #135 METAL HAND STAMP............................. $50.00 STAMP04

WAFFEN #655 METAL HAND STAMP..........................................$50.00

WAFFEN #623 METAL HAND STAMP..............................$50.00 STAMP08

REICH EAGLE HAND STAMP..............................$50.00 STAMP10

NEW!! WW2 ITALIAN FASCIST HAND STAMP .....................................$60.00 STAMP11

GERMAN WW2 TROPICAL LUGER HOLSTERKhaki can-vas Luger holster used in the last year of the North Africa campaign. Strong canvas fabric with leather accents and magazine pouch. Luger tool pouch under main flap. New mfr w/WW2 German markings ..............$14.95 HOL142

GERMAN OFFICER VISOR CAPSS, White .....$45.00 MISC378

GERMAN OFFICER VISOR CAPSS, Black, Wool .................. $45.00 MISC379

GERMAN OFFICER VISOR CAPSS, Field Green, Wool .................. $45.00 MISC380

GERMAN OFFICER VISOR CAPAfrikakorps Luftwaffe ....................$49.00 MISC38

GERMAN WW2 SPLINTER ‘B’ CAMO. M43 STYLE HAT The M43 cap is a true German innovation from WW2 and our newly manufactured splinter camouflage cap is sure to satisfy. Strong HBT material w/ venting grommets. Used by Luft-waffe and Wehrmacht units in the last years of the war. 4 sizes available: 7-1/4", 7-1/2", 7-5/8", 7-3/4. Both Enlisted & Officers version are avail-able. Officers hat comes with sliver braid piping and badge on front. Enlisted hat has no attached embroidery. ENLISTED SPLINTER B HAT ........ $19.00 MISC375OFFICER’S SPLINTER B HAT ................................... $20.00 MISC376

Enlisted hat

Officer’s hat

WW2 GERMAN M43 WOOL HATExcellent - new manufacture, earth brown colored M43 cap with two WW2 emblems. We like this one best as the color of the cap goes well with most clothing and it has a functional chin and ear protection flap that is excellent protection for cold weather. Made with a medium weight wool so it works in North American cli-mates throughout the year! Sizes 7-3/8", 7-1/2", 7-5/8" ..........$22.95 MISC345

GERMAN MAXIM MG WATER CANSteel WWI designed water can used with both the Maxim 08 and 08/15 machine guns. Steel casing with solid brass spigot and brass water fill cap. Accurate copy of the original, but stronger steel used and resists dents and edge separation better than the original ............................. $85.00 MISC440

NEW ITEM!

GERMAN M35 WW2 HELMETModel M35 helmet with leather steel banded liner and leather chinstrap and shell with rolled edge like the originals. We provide a free German WW2 era emblem decal. U.S. Size is @7-1/2",(Large), which works well between 7-1/4 to 7-5/8" head sizes. New mnfr., Green ...............$49.50 HLM037

GERMAN LUFTSCHUTZ WW2 HELMETWell-made multiple piece con-struction like the original. Used by all of the services. Large size 7-1/2" ...........$55.00 HLM024

WW2 GERMAN M41 RUCKSACKStandard ruck or backpack that replaced the 1930s tornister pack. The M41 was much better for its mission and had ca-pacity beyond that of the tornister. Comes with leather shoulder straps or you can use with your Y straps ......................... $49.95 MISC487

NEW ITEM!

GERMAN WW2 MP44 ASSAULT RIFLE (NON-FIRING) Full size, solidly built with some functioning parts. Comes with magazine. Feels and looks like the real thing! ..............................$240.00 REP03

PPK PISTOL (NON - FIRING )Another of our well-made metal replicas of the stalwart sidearm of the Wehrmacht, 007, and many other good guys and arch villains! Full size metal replica with moving slide and hammer/trigger click .....$84.95 REP21

GERMAN MP-40 SMG (non-firing)Famous full size display gun with operating bolt, recoil assembly, folding stock, mag catch and trigger. Saw combat throughout Europe, Africa, and even Vietnam! Bound to spark interest and conversations from all who see it. Realistic metal and plastic construction and it comes with steel magazine and leather sling .................................$210.00 REP02

GERMAN P38 PISTOL (NON-FIRING)Issued to Wehrmacht troops in 1940, this pistol became the regular sidearm of 3rd Reich Officers & some NCOs. Cheaper to produce than the Luger, it was light and effec-tive. Even a half pound lighter than the Model 1911 and with an 8 rd. maga-zine. Our authentic looking non firing display gun looks and feels like the real thing. Slide can be cocked, hammer pulled and trigger squeezed with a dis-tinctive click. A classic display piece in metal with black plastic grips like the original. We have two offers: 1. P38 non firing pistol ................. $72.95 REP052. P38 pistol with our WW2 dated hard shell holster ................................... $87.95 REP15

NEW ITEM!

WW2 GERMAN BOOT KNIFE & SCABBARDFighting knife or util-ity knife, this new made version of the venerable German ‘trench knife’ is convenient and easy handling. Blade is @5-75 inches long and steel scabbard has a 2-3/8 inch suspension clip. Wood slotted grips.....................$24.95 BAY269

NEW ITEM!

WW2 GERMAN PANZERFAUST ‘KLEIN’ ROCKETThe first ‘bazooka rocket’ of the war! Full size, steel, inert. New .......................... $60.00 RL004

SEE E-SARCOINC.COM FOR MORE AMAZING ITEMS!!

WW2 GERMAN WW2 PALM (REVERSIBLE) SMOCK & HELMET COVER Lightweight and comfortable, this was a favorite of the Waffen troops who used it to work well with multiple season camouflage requirements. Smock comes with the Palm helmet cover with correct attaching hooks. Two sizes available: Medium & Large. Large will fit an extra-large frame as long as it does not have to cover gear. The smocks have some flexibility as originally intended. New mfg, Palm Smock w/Helmet Cover $75.00 MISC512 (Specify size when ordering)

NEW ITEM!

GERMAN SS PALM CAMO HELMET COVER, WW2 (REVERSIBLE)Reversible Palm camouflage helmet cover with rocker hooks with internal expansion cords sewn in. Outside with green brown pattern and Fall pattern on the inside for reversible wear. Well made and stitched properly. New mfg… $18.00 MISC517

NEW ITEM!

GERMAN WW2 FALSCHIRMJAGER BANDOLIERDesigned for the Ger-man WW2 paratroop-er, this is the classic hard to find bandolier that hangs around the neck and connects to your belt allow-ing you to have 100 rds. of ammo at your disposal in an instant. It is excellent for tak-ing to the range as it makes the hundred rounds easy to handle and lug around. An excellent innova-tion which is newly manufactured with the classic German Splinter camouflage ..................$23.99 ea, or 2 for .................$40.00 MISC513We also have a small number of Ger-man “Dot-44” Camoflauge Bandoliers .............................$20.00 MISC508

NEW ITEM!

German Rubber Stamp Set

You can mark almost anything ...................$25.00 STAMP03

Cotton 3’x 5’ flags with cords are vibrant in color and more realis-tic than the Polyester flags commonly found. Great for historic displays, reenactments, or theater$24.00 Each 1. Reich State Flag FLAG062. National War Flag FLAG073. SS Flag FLAG044. Party Flag FLAG05

1.

2.

3.

4.

WW2 ARMORED FLIGHT HELMET, LUFTWAFFEFirst time offered, the German WW2 ‘Flidg-erstahlhelm’ was based on the M35 & M40 Infantry helmets. Used mostly in the skies over the Eastern front. Steel helmet with liner & chinstrap. New. $49.95 HLM039

SARCO, INC.SARCO, INC.E-mail: info@sarcoinc.com D3

Would you believe we have a few Lyle Line Throwing Gun Firing Mechanism

parts? Check our website!

Please go to our website for the following Machine Gun Mounts

and Mount parts.M25 Pedestal Mounts

M31C Pedestal MountsNew Original Travel Bar for MK 93 Mount

GI ammo can holder for MK 64 & MK 94 cradle assembly

Swedish Model 36 water cooled MG AA Tripod

Parts for Tripods and T&E’s, for M2, M122, Ms, 1917 water cooled and M63 parts have for all.

or email Dave at mgdave@sarcoinc.com

MILITARY TRAKKER PRECISION REAR SIGHT AS USED ON U.S. MILITARY REMINGTON M24

SNIPER RIFLES $195.00 SGHT15 See our website for details

MG & SUB MACHINE GUN CLEANING RODS

MORE RIFLE/SMG/ LMG, LARGE CAPACITY MAGAZINESAR15/M16 Orlite synthetic 30 rd 5.56mm ..............................................................$20.00 AR126AR15/M16 PMAG, 30 rd, 5.56mm ..........................................................................$12.95 GAL097AR15/M4 PMAG GEN M3 MOE, 30 rd, 5.56mm ......................................................$13.95 MAGPUL056AR15 15 ROUND HEX POLYMER MAGAZINE .........................................................$15.99 RM65BM 59 20 rd, .308 ..................................................................................................$49.50 BM59014BREN LMG, 20rd, .303 ...........................................................................................$8.00 BREN007BREDA 30 LMG, 30rd .............................................................................................$200.00 RM52CETME (C), 20rd, .308 ............................................................................................$20.00 CET008CETME (L), 30rd, 5.56/.223 ...................................................................................$7.00 CET023CHATELLERAULT M24/29 LMG, 25rd, 7.5mm .......................................................$20.00 RM27DANISH M40/M1941, 100rd Drum, 8mm ...............................................................$250.00 MISC287DP28, 47rd drum, 7.62mm .....................................................................................$25.00 DP2806DPT, 30rd drum, 7.62mm .......................................................................................$30.00 MISC220ERMA 32rd 9mm Largo...........................................................................................$35.00 RM54FAL, 20rd, 7.62mm .................................................................................................$17.95 RM63FND LMG, .30-06, 20rd ..........................................................................................$10.00 FND005GALIL BLANK FIRING MAGAZINE, 35 rd, .223 ........................................................$19.95 GAL097GALIL 10rd BLANK FIRING mag, Orig 10rd .............................................................$17.95 GAL106GALIL 35rd steel mag .............................................................................................$19.95 GAL093GALIL 50RD MAGAZINE .........................................................................................$29.95 GAL004M8 SPOTTING RIFLE 20RD MAG, .50CAL ...............................................................$125.00 106R021MAS 38 SMG, 32rd, 9mm .......................................................................................$25.00 RM26MG34 50rd BELT, 8mm ..........................................................................................$5.95 MG34075Mini 14, 30rd, .223 .................................................................................................$25.00 MINI404MP34 SMG, 32rd, 9mm ..........................................................................................$35.00 RM32OERLIKON DRUM, 20mm .......................................................................................$275.00 MCAN017PPSH 41 DRUM, 71rd, 7.62 ....................................................................................$40.00 MISC269SCORPION SMG, 20rd, .32 .....................................................................................$19.95 SCR008STEN SMG, 32rd, 9mm...........................................................................................$25.00 STN007SWEDISH K SMG, 30rd, 9mm ................................................................................$45.00 SWK038RPD Drum w/100rd belt. New or like new ...............................................................$59.95 RPD14THOMPSON SMG, 30rd, .45 ...................................................................................$30.00 TMP074UZI SMG, 25rd, 9mm ..............................................................................................$18.95 UZI099UZI SMG, 32rd, 9mm ..............................................................................................$18.95 UZI100YUGO.M56 SMG, 30rd, 7.62 ...................................................................................$45.00 RM45ZB-26 LMG, 20rd, 8mm ..........................................................................................$49.95 RM55

GREAT DEALS ON MAGAZINES!! RIFLE MAGAZINES

M14 20 rd new $19.95 RM024

FAL 20 rd metric, new $14.95 RM63

AK47 30rd Korean, exc condition $14.99 AK057

M1 Carbine 30rd, new $14.95 CRB008

M1 Carbine 15rd, new $12.95 CRB010

MACHINE GUN MAGAZINES

AR15/M16 100rd drum w/bag, loader, new$119.95 AR383

AR15/M16 50rd drum, new $79.95 AR422

Glock 50rd drum, new $69.99 GLK17022

AK47 30rd composite, new $9.95 or buy 2 get one FREE AK015

AK47 75rd drum, new $69.99 AK007

AK47 30rd Yugoslavian, original exc condition $22.95 AK056

UZI 32rd steel $18.95 UZI100

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

www.e-sarcoinc.com

SEE OUR WEBSITE

FOR SWEDISH K PARTS

10 rd. AK-47 MAGAZINE $14.99ea, 3/$35.00 AK054

PPSH41 swivel handle new cond. ...................................... $19.95 MISC203Beretta model 38 series....$14.95 CLN123Thompson steel rod ........... $6.00 TMP070Thompson brass rod VG ..$20.00 TMP072Thompson brass rod new .$24.95 TMP167FND cleaning rod .............$10.00 FND011Madsen model 1950/53 SMG rod brass ........................................$15.00 CLN001Yugo Model 56 SMG ............$45.00 RM45

M60 PARTSM60 RECEIVER RAIL SETS We have just bought the last of the pile of M60 receiver components only a dozen each. Included are left, right & bottom rail. These are old new production from years ago. Found at a gun show. New pro-duction – may need a bit of deburing – may have a slight bow, easily fixed. Sold as-is, no returns $75.00 a set-a few only M60108

M60 MG RIVET SETSet consists of the 25 rivets required to build the receiv-er/MG...$29.95 M60117

M60 TRUNIONSThese are 90% or more finished. Only need minor finish machining or cleaning up. All major operations are complete. These are actually better then the ones we had before $175.00 each M60103

LEWIS MG PARTSSee Our Website For More!

Mag Loader for 47rd Drum..........$45.00 LEW038Bolt w/Extractors & Lug ..........$125.00 LEW023

M60 MG RECEIVER “CONTINUITY” GAGE SETHelps diagnose stretching of the receiver. See our website for details!........................$295.00 M60002

M60 7.62MM LINKS200 .................................... $20.00 1,000 ................................ $48.00 5,000 ..............................$200.00 10,000 ...........................$375.00

Note: These are all refinished, NOT as they come out of the junk yard.

M60005

INTERESTING M60 ITEMS:• Unserviceable M60 bolts – intact but not suitable for firing ........$20.00 M60110• M60 Barrels for dummy guns – welded but usually nicely done $89.95 M60013• M60 night sight mounting brackets also adaptable for scope mounting ....$85.00 Not cheap but necessary• Original M60D helicopter ejection control bag with frame – 1 only (rare) $600.00• 1 pc. M60D spade grip backplate asy ............................................$600.00• Original padded assault sling .................................$19.95 SLNG002• Blank firing adapter ..................................$34.95 M60043• Early G.I. canvas bandoleer 5 for .................................... $9.95 M60101• M60 MG AN/PVS4 Sight Bracket ...............................$135.00 M60008• M60 Handguard Rib Repair Plate .........$9.95 ea, 3/$24.95 M60113• M60 Ratchet Chamber Brush, Orig GI New ..........$7.95ea, 3/$19.95 M60116

See our website for complete list of M60 parts & accessories

M60 BARRELSComplete M60 barrels, gas system, bipod, etc. exc – new condition .................$665.00/set M60011

D3

JAPANESE WW2 OIL BOTTLEMetal oil bottle issued to soldiers with the Arisaka Rifles. Fits perfectly into slot on the soldiers cartridge belt which we also sell. Steel body with knurled brass top. New mnfr. based on the original design as used with Type 38 & Type 99 rifles .... $16.95 JAP9916

NEW ITEM!

HARRINGTON & RICHARDSON SHOTGUN BARRELSOriginal H&R Shotgun barrels which are new, old stock. Getting hard to find these! May have slight cosmetic surface rust spots (very minor), but generally the finish is like new and any wear would be from the barrels being boxed together over the years. Four varieties available. Very limited so act fast!A. Model 440, 12 ga, 3" chamber, Full Choke, w/Front Sight, 26 Inch length ...........................$49.95 MISC480B. Model 440, 12 ga, 3" chamber, Improved cylinder, w/ Front Sight, 24 inch length ...........................$49.95 MISC481C. Model 442, 20 ga, 3" chamber, Improved cylinder, Ribbed w/ Front Sight., 24 inch length ...........................$59.95 MISC482D. Model 442, 12 ga, 3" chamber, Improved cylinder, Ribbed w/ Front Sight., 24 inch length ...........................$59.95 MISC483

ONE MONTH SALE!!!Take 25% OFF any choice or quantity on any of the

M60 receiver parts listed below!!

BROWNING 1919A4 BIPODThis steel bipod is a marked improvement over the WW2 style bipod in that this one is more rugged and allows for easy traversing with a swiveling barrel jacket collar. This bi-pod also attaches directly to the jacket and no bipod bearing is needed! We ran out of these years ago and just received a small lot. These are military issue, not repros! Get one while you can ‘cause they will be gone soon! ............................ $125.00 A4288

Finally Back in Stock !!!!!

M60 USGI BIPODSBeen furnishing these to over-seas clients, but have a hand-ful remaining at this time. Get one before their gone again! ................$125.00 M60007

USGI M14 MAGAZINEOriginal Govt. issue, used, but serviceable steel 20 rd. maga-zines from the Vietnam era. May have wear and blemishes on the outside, but otherwise in very good condition. Brought out of Thailand in the early 70s and lost in one of our warehouses. Have not had ‘originals’ in ages! ....................... $29.95 M14356

ABOUT HIGH CAPACITY MAGAZINES:Although we try to stay abreast of current State gun laws, it is a herculean task with over 20,000 laws on the books. By ordering, you are stating that you are complying with your Local & State laws. Most States allow large capacity maga-zines. Some do not. If you are unsure on this issue, contact your Local or State law enforcement to confirm what is allowed. This is a partial list of States with some hi-capacity restrictions: NJ, NY, MA, MD, HI, KS, CO, CT, IL and various county laws therein including Chicago, D.C.

GERMAN WW2 MAUSER G33 /40 FRONT SIGHT HOOD‘Scarce as Hens teeth’, so we decided to make these from an original. Ridiculously expensive when you can find one, ours is every bit as good as the original sight hood and at a price we can all afford! ...................................... $24.95 MSR633

NEW ITEM!

FRENCH MAS 49/56 RIFLE PARTSBolt carrier .......................................................................................$95.00 M4906Bolt, stripped ....................................................................................$75.00 M4907Bolt, complete ............................................................................... $100.00 M4910Dust cover w/rear sight .................................................................$125.00 M4904Extractor & spring ............................................................................$25.00 M4905Firing pin ..........................................................................................$25.00 M4903Gas tube ...........................................................................................$25.00 M4908Grenade Launcher spring ................................................................... $5.00 M4909Recoil spring ...................................................................................... $9.95 M4901FRENCH MAS 49/56 SURVIVAL KITOriginal parts and accessories to keep the rifle purring! An $80.00 Value at a discount! Includes: Extractor, Firing Pin, Gas Tube, screwdriver, brush, grenade launcher retaining spring, canvas pouch .........................................................................................................$44.95 M4902

MAS 36 FRENCHComplete bolt ............ $89.95 M36056 Firing pin & spring .... $17.95 M36066 Bolt plug .......................$6.00 M36023 Extractor ................... $10.00 M36018Set #2 Action parts: All bolt parts

above, plus floorplate, follower & spring, rear sight aperture, trigger & sear assy .................... $29.95 M36049

Set #3 Wood Set: All 3 pieces in excel-lent to like new .................... $65.00 M36050

Set #4 Combo Set: Sets #2 and #3 .................... $90.00 M36051

COMPLETE SET OF FRENCH MAS 36 RIFLE PARTS

less barrel and receiver. VG cond or better $99.50

1. Field Manual (original French) ..............................$4.95 SB0182. Leather sling ........................................................$15.95 M360323. MAS36/51 Complete Stock & HG set with all hardware ...................................... $125.00 M36058A4. MAS36 full stock set w/all metal .....................$85.00 M360575. Orig broken shell extractor ................................. $9.95 BSE005 6. Original grenade launching boot .................... $19.95 M360347. Pull-through bore wiper ....................................$1.95 M36053

FRENCH MAS 36 ACCESSORIES

FRENCH MAS-36/51 RIFLE PARTS SETIndustry forged prior to WW2, used by Vichy forces against U.S. GIs in North Africa, and extensively brandished in Indochina and the Algerian conflict as well as Cambodian and Syrian Civil Wars. We were able to obtain these rifles with barrels and receivers removed. These are the model with grenade launcher and sight assy. Comes with all parts shown including wood stock & hand-guard in very good condition............................$150 .00 M36067

MAS 36/51 GRENADE LAUNCHER RIFLE PARTS

A. Stock Set – 3 pieces in VG to exc condition ................... $75.00 M36045B. Grenade Launcher Assembly – compete “front end” of a MAS 36/51. Launcher sleeve, sight, upper band, range slide. Sleeve has slight saw cut ............ $49.95 M36046C. Set A & B combo ... $99.95 M36047

See our website for all MAS 36 & 36/51 parts

NEW ITEM!

METRIC FAL BIPODSbrand new original military – FN pattern never before available. $34.95 3 for $94.50 FAL219

Original New Israeli FAL heavy Barrel stock & forend set $39.50 FAL147

L1A1 PARTS & ACCESSORIESAustralian L2A1 Bipods Good used condition ................$40.00 L1A1001Good to very good L1A1 Pebblegrain Stock ................................................$24.95 L1A1037Used excellent L1A1 Buttplate ... $8.00 L1A1020 L1A1 Gas Plug Body - New Parker Hale ................................................$19.95 L1A1046New Original pebble grain L1A1 pistol grip Good Condition ........................$13.50 L1A1036Original L1A1 Flashider ............. $7.95 L1A1026Gas Tube New ..........................$19.95 L1A1042

FAL METRIC PARTSFAL246 Blank firing adapter Israeli ..... $14.95FALB023 Belgium butt swivel, orig, brand new ...........................................$9.95FALM005 Buttplate, new ....................... $14.95FALM073 Carry handle .......................... $12.00FALM044 Charge lever assembly ............ $12.00FALM057 Ejector block .......................... $20.00FALM020 Firing pin ............................... $10.00FAL034 FN metric lower stripped w/recoil spring tubes ........................... $59.95FAL243 Gas pistol spring, new ........................ $4.95, 3 for $11.95FALM054 Hinge pin ............................... $10.00FALM067 Hold open device assembly ..... $20.00FALM068 Mag catch &spring ................. $12.00FALB023 New Belgian FAL butt swivel ...... $9.95FALB020 New Original Pebblegrain Stock .............................................. $24.95FAL210 Original Israeli (Marked) FAL Lower (Stripped) ....................... $125.00 eaFALM055 Rear sight complete .................$35.00FALM029 Top cover ................................$12.00FAL299 Stock swivel assy w/ screws ...... $9.95Please go to our websites for virtually all other Metric FAL parts

ORIGINAL NEW OR LIKE NEW FN PATTERN FAL HEAVY BARREL BIPODS WITH ORIGINAL COUPLER/FLASHIDER

Others get $100-$125 just for the bipod FAL277Our price for both only...........................$94.95These original flashider/couplers have been unavailable for years.Bipod only FAL273 ..................................$65.00 3 for ...................................................$175.00Flashider & coupler only FAL278 .............$39.95Note: The coupler & flashider does not include the rotational lock-we will have these later.

Note our new lower price above on FAL gas tubes.

FAL TOOLS1. Magazine Loader, (stripper clip guide) PN-1135-1505 2 for .................... $5.75 FAL1672. Broken shell extractor .................$5.95 BSE0133. Chamber cleaning tool ................ $2.95 FAL1714. Buttstock removal tool ..............$14.95 FAL1275. Special 1 of each of the 4 tools above .................................................$32.00 FAL2656. Israeli 5 function combination tool – Israeli marked .....................................$9.95 TOOL038

ISRAELI HEAVY BARREL FAL (FALO) WOOD CARRYING HANDLE ASSEMBLY

Haven’t had these for years. These can also be used as a

longer wood handle on a regular FAL. $29.95 FAL279

NEW FAL METRIC & L1A1 GAS TUBESMetric FAL gas tube, newWill also work on inch guns .........$14.95 FAL250New original Metric FAL gas tubes $19.95 FAL220New original FN Pattern Chrome Lined FAL Gas Tubes ................$19.95, 3 for $49.95 FAL220Used original Metric FAL gas tubes .$9.95 FAL251L1A1 New gas tube ....................$19.95 L1A1042

A LUCKY FIND! Brand new original Belgium Fabrique National – Compos-ite pebble grain stock. $24.50 ea 3 for $59.95 FALB020

NEW ITEM!

ORIGINAL EXC NEW – ISRAELI FALO HEAVY BARREL BUTTPLATE ASSEMBLYWith shoulder piece - just found a few more! .................................................. $34.50 FAL070

GO TO OUR WEB OR E-COMM SITE FOR NEW ORIGINAL KNUCKLE PIVOT BOLTS

FOR FAL PARA FOLDING STOCKS

FAL MAGAZINE LOADERSOriginal Military.......$4.95, 3 for ............. $9.95 FAL167

ORIGINAL ISRAELI PATTERN FAL HEAVY BARREL BIPODSFound a few only ....................... $65.00 FAL007We have finally obtained some Israeli pattern heavy barrel bipod couplers ....... $64.95 FAL232Combo Special HB Bipod and coupler ................................................$119.95 FAL287Note: Rotation lock not included

JUST IN THE DOORBrand new original Israel FAL grenade launcher .............................$19.95, 3 for ........................ $49.95 FAL289California Law forbids sales to residents of Calif.

STEN GUN ‘COMMANDO GRIPS’ FOR STEN MK2 SMGsSteel grips as used in WW2 to make the Sten MK2 SMG even shorter for close in fighting and Para operations. Easily attaches in seconds by sliding the stock off of the receiver and sliding the gripin place to be locked in by the buffer cup. Very limited quantity. STEN MK2 COMMANDO GRIP $17.95 STN107

MK2

STEN MK2 PARTS KITProperly cut British Sten MKII Parts Set consists of T-buttstock, bolt assy. and recoil spring, magazine housing with catch assy./lock/ejector, trigger housing with internals, cover & screws, rear & front sight, and rear caps. Our fabulous price may not last long as these guns are getting more difficult to find overseas! Get one before they run out. This kit does not come with a barrel. MKII kit w/o barrel ..........$139.95 STN028MKII kit with barrel..........$204.90 STN030*Almost all States allow ownership of this kit, but we recommend you consult your local & State laws prior to ordering.

STEN GUN ACCESSORY PACKThree piece set of some of the important items issued with the gun during WW2. Set includes an original magazine clip on loading tool, Sten sling and a reprint of the 1942 British military Soldier’s manual ........... $19.95 STN113

***NEW...FAL STEEL BUTTPLATE...NEW***Beautiful newly mnfr’d buttplate for Metric

FAL buttstocks. Black oxide finish... $9.00 FAL128

ISRAEL GAS PISTONS Found a small lot $24.95 ea. FAL018

BRITISH FAL/L1A1 SNIPER CHEEK PADRarely found on the surplus market, this black leather cheek pad is uniquely designed to fit the tapered FAL stock and provide comfort and a slight incline for the cheek to rest when using the sniper scope. Available in brown or black. Please specify when ordering $20.00 FAL288

FAL QUAD RAIL FORENDPrecision high quality Weave/Picatinny quad rail fits perfectly on your L1A1 or FAL. Fast and easy to install and the 6061 Aircraft aluminum is protected with a hard Coat anodized finish. Comes with Hex tools ............................. $59.99 FAL254

Add a barrel to this kit for the discounted price of $64.95 (barrels regularly $74.95)

FAL PARTS SETLong ago we acquired a small lot of early FN manufactured kits from ‘conflict zones’ in the Western Hemisphere, (Americas). Although many of the rifles had sustained battle damage, we have culled these out and can offer you the parts sets of these veteran rifles. These original metric FALs exhibit features of the early ‘G’ series FAL that have been so elusive. The Stock & handguards were in rough condition so we have replaced them with a new original steel military handguard set (value $90.00 – Handguard will be different than pictured) and an original new military period wood buttstock compatible with the early buttplate & swivel, (original buttplate and swivel are included). The barrel has been demilled, but the at-taching parts are pres ent including the swivel, regulator, front sight, gas block and late style flash hider. Bolt carrier, bolt assy, cover, charging handle, piston & spring, and other associated parts are present. No upper receiver. Great set of parts for building that Early FAL rifle that you‘ve always wanted.

NEW ORIGINAL METRIC FAL BUTTSTOCK WITH HARDWAREExcellent condition wood stock with butt-plate, front cap, and swivel assy w/screws. Complete and ready to install! Always difficult to find complete stocks! ........................................$49.95 FALM078

FAL REAR SLING SWIVEL ASSY.Swivel plate, shim, 2 screws and swivel are ready to assemble on your FAL Metric buttstock. Base is @26mm long by 12mm wide. Strangely it has been difficult to find these for many years, but now we finally have nice clean sets! ..................$9.95 FAL074

We offer these kits in 2 configurations:A. Complete kit with new wood buttstock and an original FAL metal handguard .........$275.00 FAL297B. Complete kit without stock and handguard, but with pistol grip .............................$195.00 FAL298Don’t miss out on these early FAL kits! - Only have a small lot.****Also if you purchase a kit, we can offer the following ‘add ons’:***BIPOD – Original Early Pattern .............................................................................................$19.95***MAGAZINE LOADER ............................................................................................................... $2.95***MAGAZINE, 20 RD................................................................................................................$17.95

STEN GUN ‘COMMANDO GRIPS’ FOR STEN MK5 SMGsSteel grips as used in WW2 to make the Sten MK5 SMG even shorter for close in fighting and Para opera tions. Easily attaches in seconds by sliding the stock off of the receiver and sliding the grip in place to be locked in by the buffer cup. Very limited quantity ..........$24.95 STN111

BRITISH STEN MK-5 PARTS SETKnown as the premium model of the WWII Sten SMGs, this Sten features a wooden pistol grip and stock. These kits have been cut to BATF require-ments and have had the magazine, ejector and barrel removed, although the front sight assy, is included. This kit also comes with a reprint of the standard WWII Sten manual and a Sten sling. This has always been the best and the rarest of the Sten guns so pick one up before they are gone! ................................................$249.95 STN109

Found a few like new...

ARGENTINE FAL HANDGUARD SETS

Original $89.95 FAL294

A FEW ORIGINAL BELGIAN FAL BARREL GAS BLOCKS $39.95 FAL295

STEN MK3 PARTS SET Properly cut British Sten MKIII parts set with T-Stock, bolt assembly w/cocking handle, trigger housing w/internals, cover & screws, magazine housing w/catch assembly, ejector and front & rear sight, recoil spring and rear caps. Also includes about 1-3/4" of the front muzzle receiver tube with front sight. This kit does not come with barrel. MK3 kit w/o barrel ...... $89.95 STN098*Almost all states allow ownership of this kit, but we recommend you consult your local & State laws before ordering.

SLNG109 Sten Sling ..............$9.95STN114 Sten WW2 Box Mag Loader ..........................$22.95BAY246 Sten MK2 Bayonet ..........................$34.95STN019 Sten Clip-On Mag Loader .............................$9.95

STEN SMG

FAL .308 BARRELS – FM ORIGINAL MILITARY CONTRACTFinally a limited selection of original FAL barrels has arrived. Grab these up while you can because they’ve become hard to obtain! ‘NEW’ condition Barrels...A. Barrel, w/ gas block, closed ear, non-bipod cut, non-chrome lined .............................................................................................$199.00 FAL292B. Barrel, w/gas block, closed ear, bipod cut, chrome lined .........$199.00 FAL290C. Barrel, no gas block, non-chrome lined, non-bipod cut ...........$160.00 FAL300

FAL/L1A1 30RD .308 COMBAT VESTChest rigs as used with the Bren L4, FAL series guns , AKs, and similar assault weapons in African ‘Bush’ wars. Originally fielded in Rhodesia for 30rd .308 magazines, it can still be seen in use from Mali, Congo, Southern Sudan and elsewhere on the continent. Simple, practical, and comfortable to wear. Has fastening waist strap and shoulder straps. This item has never been on the market! Vest only $36.00 BREN129

SALE! Sten Mk3 Kit with NEW Barrel..................................$134.95 STN112

STEN GUN BARRELS FOR MK2 & MK3A. MK2 BARREL - Brand New in the white ......................................$74.95 STN029B. MK3 BARREL - Brand New in the white..............................$74.95 STN108

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

www.e-sarcoinc.com

E3

FAL/BREN .308 30 rd. MAGA-ZINESSteel 30 rd. magazine origi-nally issued for the .308 Bren machine gun and the British version of the FAL, (L1A1 Rifle). These magazines are adaptable to the Metric FAL with a little work to the front locking lug which requires a longer ‘beak’ or lug. These are original British military magazines with markings for the L4A1 series of .308 Bren Guns. Magazines are in very good / excellent condition. ..................................$39.00 each, or 2 for ............................... $58.00, or 10 for ..............$250.00 BREN124

See our website for MILITARY ISSUE MOUNT STANAG’ FAL SCOPE MOUNTS!

GALIL BOLT CARRIER.223 Like new condition Galil bolt carrier from military con-tract overrun! Have not had these in years. ..........................................................$125.00 GAL007

GALIL TOP COVERStripped steel, military Galil top cover in the white! These do not have a rear sight mounted, which makes them perfect for making a ‘sniper mount’ top cover. There’s a nice flat spot on top to emplace a scope mount or your own rear sight ! Also a great replacement for AK47 top covers, especially as a platform for adding a scope. New, military contract / overrun ................................................................................$10.00

FAL RIFLEPLEASE NOTE:

We have moved our individual extensive FAL, L1A1, & FN FAL parts listings to our website. Please check there for these. If you have no access to the Internet we will be happy to

mail you a copy.

FN FAL HANDBOOKHandy book with schematics, stripping, servicing, accessories info, operating, and historical information. 35 pages............$6.00 SKT08

ARGENTINE FAL LEATHER MAGAZINE POUCHWell-made black leather FAL mag. pouch holds two magazines and is reminiscent of the gear used during the Falkland Island campaign. Great for simi-lar sized magazines too, or one cold can of beer! ..........................................................$9.95 FAL160

NEW ITEM!

U.S. AN/PRC-6 WALKIE TALKIE From the Korean War through Vietnam, this radio could be found on America’s battle fields. Many a ‘call for fire’, recon sitrep, distress call, and move to ‘en-gage’, came across these handheld sets carried by most units in the field. Also a favorite of the French Foreign Legion in Vietnam & Algeria and Israel in the 6 Day War and Yom Kippur War. These units are untested, have blemishes and wear from field use, but are great display pieces now long gone from active service around the world. From various countries & sold as is. Original..... .$59.95 MISC200

STEN LOOP STOCKFinally back in stock and sure to go quickly. We have a small lot of steel Sten loop stocks for use with the Sten Mk 1, 2, & 3 SMGs. New mfr ............ $45.00 STN117

NEW ITEM!

GALIL RIFLE BIPODS (Early & Late Styles)Terrific lightweight Israeli military bipods are perfect for completing your Galil rifle parts set as many of the kits on the market are missing them. Early style and late style bipods have a bottle opener and wire cutter feature and the late style bipod has a self contained spring and pin for holding it onto the rifle gas block that has mounting points. EARLY STYLE GALIL BIPOD .......................................$19.95 GAL089LATE STYLE GALIL BIPOD $29.95 GAL090

U.S. M1936 WEB PISTOL BELT WITH M1916 .45 CAL. HOLSTERCombination set of Model 1911 .45 Hip Holster (M-1916), coupled with the WW2 canvas U.S. marked pistol belt. New.Set of 1911 holster & canvas pistol belt $28.95 HOL152 ( pistol not included )

G3

U.S. M1A1 BAZOOKA (non firing )

Sarco is please to offer a full size steel and wood replica of the venerable WW2 U.S. Bazooka. This unit from the ‘Kamabee Keep’ dept., sports the look of how the Bazooka appeared as used by U.S. forces in European & the Pacific theaters . It originally was also referred to as the 2.36 Rocket Launcher due to the diameter of its rocket. The unit comes complete with sights and sling. We will be getting 2 different types of inert rockets in shortly and will be able to offer them separately. M1A1 non firing M1A1 Bazooka .......................................................................$325.00 MISC502

U.S. M1A1 BAZOOKA ‘PROJECT PARTS’ SET

For the person who has the ability to weld & work metal, this parts set will save $ ! Kit comes with all new fabricated parts, ( no GI parts) that we use to make our completed M1A1 Replica Bazooka. Some parts will need ‘tweak-ing’, but with the skills necessary , you can knock this project out in part of an afternoon. M1A1 Bazooka Project Parts Set ...............$225.00 MISC503

T H E S A R C O B M 5 9 W O R L D

BM59 ‘APENNINE’ MODELBM59 configuration rifle in .308, made with a U.S. modified M1 receiver, 20 rd. magazine, bipod, grenade launcher sight, and muzzle booster. Comes w/ GI stock and parts are fin-ished in black oxide. See our web site for other details ...........................................................$1495.00 GUN585

Built the same way they were built in Italy, on modified Garand receivers.

Exciting news is that this .308 rifle parts set is in our warehouse and can be yours! Considered a fabulous rifle with features of ‘ easy take down’ and handling ,that surpass the M1 Garand & M14 ! This is considered the best of the Italian ‘BM’ rifle series and comes complete with bipod and grenade launcher/ Tri-compensator flash hider. Many professional shooters say that the Tri-compensator on this rifle is the best and most effective around! The barrel does not come with the kit, but we should have some new .308 barrels soon! A 20 rd. magazine does come with this kit. There are a number of companies applying a conversion to the Garand receivers to make them BM59 receivers, so having a gun kit built into a firearm is a reality! As a special introductory thank you, we have included a free sling! BM59 ITAL Parts Set ................................................... $495.00 BM59032

BM59003 Receiver blueprints w/kit .........................................$29.50

BM59004 Receiver blueprints w/o kit .........................................$49.50

BM59005 Stock Used Original .........................................$50.00

BM59007 Barrel G-VG ...................................... $135.00

BM59008 Bolt stripped .........................................$65.00

BM59009 Bolt stop (release) .........................................$20.00

BM59010 Buttplate assembly good .........................................$35.00

BM59011 Buttplate stop pin ............................................$2.00

BM59012 Buttplate assembly exc. condition ..........................$65.00

BM59015 Magazine catch .........................................$20.00

BM59017 Muzzle break ......$50.00

BM59018 Plate for laminated gas cylinder lock .....................$10.00

BM59019 Stock assembly, exc. condition ..........................$75.00

BM59020 Trigger Housing w/Mag Catch................................$50.00

BM59021 Operating spring guide .........................................$25.00

BM59022 Operating spring guide block ................................$12.00

BM59023 Orig Stripper Clip Guide w/6 Stripper Clips, marked SMI .........................................$25.00

BM59024 Barrel, Fair to Good (can be used on .308 GRD .........................................$29.95

BM59025 Operating Rod Spring .........................................$15.00

BM59026 Operating Rod ...................................... $120.00

BM59027 Safety Spring ...........$8.00

BM59028 Handguard Set Used Good .........................................$35.00

BM59029 Set of op spring guide, front mag catch, feed guide .........................................$49.95

ORIG BM59 PARTSIN STOCK

SPECIAL SALE ON OUR EARLY MODEL BM59 KITS NEW ARRIVAL ORIGINALLatest Model BM59 Kits with Bipod & Grenade Launcher (TRICOMP)

We have a couple complete guns left from our old program if you want to get ahead of the curve.

ITALIAN MILITARY BM-59 ITAL (RIFLE PARTS SET)

ITALIAIN BM59 - E MODELA stalwart weapon of the Italian Army in .308, and with a 23.5" barrel and 20 rd. magazine. These are excellent shooters and became popular with 12 foreign military branches from South America, Africa, & Asia. Look closely at guerilla fighters in Ethiopia, Eritrea, or Nigeria, and you may see them still being used. Bonus is that many of the same parts are shared with the M1 Garand! ..............$1395.00 GUN590

BM59 RECEIVERNote: We are in the process of building BM59 receivers - we expect to have them available by the time this ad hits. Check our website...........................................$595.00 GUN658

SPECIAL!! One of each of the 2 BM59 Kits (BM59002

& BM59032) $795.00 BM59034

ARGENTINE BM59E RIFLE PARTS SETThese are all of the parts except the receiver for the early model 7.62mm Italian BM59SL rifle. This rifle is essentially a standard M1 Garand semi-automatic that has been modified to use 20 rd. BM59 magazines, and has been chambered for 7.62mm Nato ammuni-tion. It retains the well proven Garand sights, trigger mechanism and gas system, while doing away with the 8 round Garand clip in favor of a 20 round de tachable box magazine. These parts sets can be assembled on an M1 Garand receiver which will require a few modifications to accept the new feed system. Parts are in very good condition, bores are nice. These kits come with a barrel and magazine… SPECIAL NEW LOW PRICE! ......... $445.00, 3 for $1295.00 BM59002

ORIGINAL BM59 MAGAZINESGet the extras while they last .$44.95, 3 for ............................$124.95 BM59014Note: These are original mags – not the build ups with plastic followers.

ARGENTINE BM59E BASIC BUILDER KITThis kit includes all the unique BM59 parts – all other parts are interchange-able with Garand. This allows you to get your basic kit at an affordable price and you can acquire the Garand type parts by shopping or trading around but this will let you get your kit stashed. Stripped BM59 bolt, original muzzle break, trigger housing with mag catch assembly, bolt hold open with pin & spring, operat-ing rod, operating rod spring and guide, safety spring, stock, rear handguard, front cartridge guide & magazine catch & pin. All other parts are interchangeable with Garand…. SPECIAL NEW LOW PRICE! $245.00 BM59033ALSO, have the above kit with a good condition barrel. SPEIAL NEW LOW PRICE! $345.00 BM59030

NEW BM59 ITALIAN BARRELSWe hope to have new productuion barrels by the time this ad hits. Check our website or call. Our barrels will be cut for the sim-plified front band that pins on. If you wish to use the original band you can easily modify the barrel ......$175.00 BM59031

Need a set of receiver blueprints to convert a Garand receiver?

WE HAVE RECEIVER BLUEPRINTS BM59003 – Set of prints with a kit purchased .................................$29.95BM59004 – Set of prints without a kit pur-chased .......................................$49.95Note: You can convert an M1 Garand re-ceiver to BM59. That’s what Beretta did!

NEW ITEM!

Not for sale in California with grenade launcher

M1 GARAND POST WORLD WAR 2 ‘PROJECT BARRELS’Original M1 Garand barrels with good / very good- bores, but with blemishes and ‘cut’ / tack weld marks on the outside shoulder where they were removed from drill rifles. Barrels are post war dated. With some work, they can be restored. Muzzle threads are fine as is the muzzle end key way and threading. Sold individually as long as supplies last ................$45.00 GRD352

NEW ITEM!

H&K MP5K 15 RD. MAGAZINEOriginal fac-tory steel MP5 magazines originally supplied with MP5K model SMGs, but for use in other MP5s, SP94, & H&K94, too. Marked with factory codes and in like new condition. Very limited ..............$75.00 RPM321

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

www.e-sarcoinc.com

NEW ITEM!

26.5mm FLARE GUN BARREL5.5 inches long, these surplus flare gun barrels are great as replacement barrels. Similar to our item# MISC273, this barrel does not have a flared muzzle in the old British style .....................$17.95 MISC527

NEW ITEM!

ISRAELI 25MM FLARE GUN BARREL

Steel flare gun barrel marked 1"/25mm, with Israeli cartouche and part #. Just over 6 inches in length. Appear to be in good serviceable condition. We believe that these were replacement barrels for the German LP42 flare gun that they obtained after the war ................. $29.95 FLARE-007

NEW ITEM!

BRITISH WEBLEY .38 REVOLVER MK4 (NON-FIRING)Standard service revolver of the British Military in WWII Sold with lanyard.Webley Pistol .38 Pistol w/lanyard $75.00 REP17

Webley Pistol .38 Pistol w/lanyard & leather holster $105.00 REP04

J3

ORIGINAL U.S. BASEBALL GRENADESInert, original bodies significantly different from the fake cast bodies sold elsewhere on the market.Complete with expended fuse and ring assembly. Limited.....$14.50 AM032(check local/state laws to make sure you can own this item)

RHODESIAN ARMY PATCHEmbroidered traditional Army patch of one of the most famous 20th century fighting forces! ................................................ $6.50 MISC395

WW2 GERMAN PANZERFAUST ‘KLEIN’ ROCKETThe first ‘bazooka rocket’ of the war! Full size, steel, inert. New .................................... $60.00 RL004

RPG-7 ROCKET Original Russian train-ing rocket, full size, weight, and comes with separate rocket motor in waxed container. @36" long when assembled. Limited ...................................... $124.95 RL011

M2 60MM MORTAR BASEPLATEFull size steel baseplate with locking arm assembly. This is the plate as used with M2 & M5 60mm mortars. Late manu-facture, @9.6 lbs., in olive drab color. Just what you need to complete your display mortar or make reenacting more realistic. Always difficult to find and bet-ter yet, our price is the best on the market! ........................................ $275.00 MISC409 *Quantity purchase available too! Ask for Mark

PARTS FOR .22 LR CAL BROWNING MACHINE GUNS & CONVERSIONS

See our website or email Dave.

U.S. 60MM MORTAR SLINGWW2 style heavy duty sling made from thick canvas with leather ends. One end also has the wire loop for attaching around the ‘ball’ end of the mortar tube while the other end has a leather cup. Late manufacture.$24.95 SLNG105

U.S. M1936 PISTOL BELT New made, canvas WW2 style pistol belt with three tiers of grommets and in a size that adjusts out to 45 inches. U.S. marked..........$16.95 MISC326

WW2 U.S. M19 60mm PARATROOP MORTAR

U.S. Marine Raider and Army Airborne units benefited from a light 60mm mortar assembly rushed to the front in 1942. Roughly a 20 lb. mortar, this allowed a savings of 25+ lbs. over the standard M2 mortar, and allowed for more ammo to be carried. Paratroops learned how to utilize it by aiming with the M15 sight as used on the M1 Garand grenade launcher and by using a degree of ‘Kentucky Windage’ to walk rounds on top of the enemy at places like Bougainville, Solomon Islands, Guadalcanal, Operation Husky, etc.

Also significant use occurred in Korea and Vietnam. Our non-firing steel replica uses the original WW2 issue baseplate and M15 sight assembly with a new made undersized I.D.

tube and non-functional ball and cap assy. with lanyard latch firing lever. First time available in the United States! Mortar only. Supplies are very lim-ited $495.00 MISC397

MADE IN THE USA!

USGI MORTAR SHOULDER PADSHeavy ‘duck’ padded canvas shoulder pads slip over your head and protect shoulders from the burdensome weight of mortar tubes, light & heavy Machine guns etc. Generally issued to Mortar crews in WW2/Korea & Vietnam. Original ..................... $9.95 GOD53

(non-firing display)

May be the COOLEST new military product of 2016!

When is a spade not just a spade? When it’s a Mortar too! Sarco has the ‘Kamabee Keep’ rework of the coolest mortar design in the history of warfare. Innovative Russian designers took the concept of the standard ‘Entrenching Tool’ that every soldier wore on his belt, and elevated it to ‘Heavy Weapon Status’, by allowing it to dig trenches & also fire 37mm Mortar Rounds! Designed in the late 1930s and fielded against Finland in late 1939/40 in the Russo Finn War, and throughout WW2 along the Russian Front.Never been on the U.S. or World market! It can be attached to your belt using the canvas & leather carrier, be detached to operate as a small shovel, or used to lob rounds on the enemy. Transforms into a mortar in @15 seconds with practice. This is a new made replication of the original and is non-firing. Sarco Inc. carries this item exclusively and they are currently in stock. We also have the ‘late war’ style 15 round ban-

dolier used by troops to carry mortar ammunition including Mosin Nagant Rifle ammunition. To top it off, we have replica 37mm Mortar inert display rounds available too ! The only place to see this item in the entire world is in a Russian military museum. Truly this is a piece of ordnance lost to history! The design concept was amazing and its impact could still be amazing in this day & age! Imagine a platoon of infantry Riflemen also each carrying

15 mortar shells and working as a fire and maneuver machine. Stalinist purges and a failure to develop better ammunition put this idea to sleep before its time!

37mm Spade Mortar Assembly ...... $175.00 MISC458Belt Carrier for the Mortar ..............$19.95 MISC421Chest Bandolier w/ Mosin Pouch ......$65.00 MISC429Mortar Round, inert for display .......$19.95 MISC356

NEW ITEM!

NEVER BEFORE

AVAILABLE !!

(non-firing display)

RPG-75 SHOULDER FIRED ROCKET LAUNCHERWatch the news and you will probably see the RPG75 being used in combat by both sides in the Syrian conflict! This 2 foot long inert training RPG-75, opens and extends to 35” long, when ready for fire. Very similar to the U.S. M72 LAW Rocket Launcher, this Czech made rocket launcher weighs 7 lbs., and comes with shoulder strap and flip up sights. This is the same RPG you will see in many hot spots around the world, especially in various Bush Wars in Africa, by SWAPO units in Angola, and the Near East................................$199.95 RL010

BROWNING .32 PISTOL FIRING PIN(Works with FN, MAB , COLT too!)Firing Pin for the Browning .32 pistol, and also a perfect replacement for the FN 1910 and FN1922 .32 auto pistols, MAB D&C .32 auto pistol models, and the COLT 1908 .25 auto pistol! We have not had these in ages so get them while you can!.$19.95 MISC477

SARCO MAGAZINE HAND LOADER‘Every Gunners Kit Should Have One of These’…Save the strain on your fingers with our steel hand loading device that can be used with many single & double stack magazines like the Browning Hi-Power, Beretta 92, Sig226,CZ75, HK P7 etc, etc…. Also works with SMG magazines like the Sten, Lanchester, MP40, Madsen etc. Primarily for loading 9mm, but works with many similar calibers. Patented ....................... $3.95 ea MAGLOAD003

M3 GREASE GUN POUCHFaithfully reproduced from original 3 cell U.S. G.I. magazine pouches used from WW2 thru Vietnam. Features ‘lift the dot’ snaps and nomenclature markings on the back. These are made with the same tight canvas weave as were issued to U.S. troops. Always hard to find. ..................................... $16.95 GG056

HOTCHKISS MACHINE GUN MAGAZINE POUCHFrom the ‘old days’ when heavy duty leather pouches supported with brass hard-ware was the norm! Good for all sorts of magazines as it has internal dimensions of 8.75 x 3.75 x 2 inches. Pulled from WWI Turkish military stores several decades ago. Very limited ..............$20.00each MISC418

www.e-sarcoinc.com

SMAW TRAINER$1,200.00 RL007

Originally produced as a training unit for U.S. Govt by F.A.T.S.Note: For more info, see our website.

WW2 M3/M3A1 GREASE GUN CASEThe U.S. Grease Gun had it’s own USGI case made from heavy OD canvas which held the gun with 30rd. magazine installed for those quick response actions for crews in tanks, half tracks, motorcycles etc.We have the standard U.S. Army case and a USMC version as used in WW2 and Korea. Few have survived and rarely surface on the surplus market. They were still in use with the Marines in Vietnam in the Ontos, M48 tank etc . These are new mnfr.U.S. Army Grease Gun Case ...................................... $28.95 GG069U.S.M.C. Grease Gun Case ...................................... $28.95 GG070

.45 CAL MAGAZINE LOADER FOR M3 GREASE GUN But works on Inghran, Commando Fox, Apache, Eagle, etc. Marked “Co-bray” GG057....................$7.95 ea, 3 for ................................$19.95

WW2 GERMAN LUFTWAFFE FLAK HELMETUnder severe duress during the Russian campaign, and as indefatigable Soviet A.A. fire became an almost assured death sentence to German pilots, bomber crews were outfitted with extra protection to enhance survivability. Some M35 style helmets & more commonly, M40 helmets were produced in a converted flavor reminiscent of the WWI ‘radio operator’ helmet, allowing for use of headphones. In terms of the Allied effort using the M3 Armored helmet for bomber crews, this was the best German equivalent. Almost exclusively used on the Eastern Front. The features of the ear cutouts would have made this an excellent Infantry helmet as it does not inhibit hearing. Steel helmet with liner, fitting standard Large size U.S. size 7-1/2 on average. New ..................................................................................................$49.95 HLM039

NEW ITEM!

U.S. PREMIUM GRADE HOLSTERSSarco offers a long line of standard grade quality holsters which can be found in this ad on the ‘Y’ page. We also offer some exceptionally tanned U.S. Military historic holsters for presentation grade pistols. The finish and crisp embossing are superior to our standard line and are still affordably priced. Beautiful quality holsters for your top grade pistols!A) 1916 Hip Holster (Right Hand & Left Hand Available)Model 1911 hip holster in original WW2 color of rus-set brown w/ leg strap. Right Hand draw: ........................................................................................................................$35.00 HOL106Left Hand draw: ...............................................................................................$35.00 HOL071B) 1917 S&W .45 REVOLVER HOLSTER (Left & Right)Butt back model in russet for the right hip with leg strap .................................$35.00 HOL101Butt forward model for right hip with left hand draw. Can be used on left hip for left hand draw too ...................................................................................................................$35.00 HOL102C) 1912 Cavalry Holster ( Right & Left Hand Available)Long drop cavalry holster for the Model 1911 pistol in the WW2 russet brown color with leg strap.Right Hand draw..............................................................................................$35.00 HOL099Left Hand draw ................................................................................................$35.00 HOL070D) Victory Model S&W Revolver Holster (Right Hand)WW2 russet brown color ..................................................................................$35.00 HOL107E) Colt 1892 & S&W 1902 .38 Revolver HolsterOriginal russet color with brass ring at bottom. Made for the standard 5" barrel. Commonly called the M1905 holster ................................................................$35.00 HOL103

.45 LONG COLT: AM152255 gr, lead cowboy loads. 50 rds/boxq . $34.99 OR 100 rds ............................................ $59.95

.45 ACP: AM153230 gr, full metal jacket. 50 rds/box ...... $19.95 OR 100 rds ............................................ $34.95

ALSO....30 CARBINE: AM149FMJ, 110 gr., (ARMSCOR) 100 rds ......... $39.95 OR 1000 rds ............................................$349.50

38 SUPER: AM148FMJ, 124 GR., (ARMSCOR) 100 rds ..............................................................$34.95 OR 1000 rds ........................................$299.50

9mm LUGER: AM147Ball ,FMJ,124 gr. (ARMSCOR) 100 rds ..............................................................$29.95 OR 1000 rds ........................................$249.50

.22 Long Rifle High Velocity: AM154 Lead H.P., (ARMSCOR) 36 gr. 500 rds (brick) ..............................................................$49.00

.22 cal Magnum 40gr JHP: AM155500 rds (brick) .....................................$150.00

.223 FMJ, 55 gr (ARMSCOR) AM157 100 rds .................................................. $34.95 OR 1000 rds ........................................$335.00

223 FMJ, 62 gr: (ARMSCOR) AM159100 rds .................................................. $34.95OR 1000 rds ........................................$335.00

AMMUNITION

.50 CAL. BALL AMMUNITION

Great deal on 7.62x51 (.308 ball ammunition) New Tula mfg—loose, steel case, berdan, non-corrosive, FMJ AM160 100 rds .......................$41.95, 250 rds .......................$97.50, 500 rds ..................... $184.95

NEW ITEM!

.308 NATO (7.62 x 51)

Big blasting action! .50 cal. Ball ammo that has been loaded & reassembled by one of the most respected reloaders in the business! We love their ammo for reliability and cost. We sell this by the .50 cal. Ammo can with 150 rds. In Stock! ...................................$397.00 AM158

‘BLACKOUT BLOWOUT’‘300 Blackout ammunition at super savings! 147 grain, full metal jacket.$14.99 box of 20rds. (1 box ) AM156$69.95 per 100 rds (5 boxes)$124.95 per CASE (200 rds.)

V350 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

www.e-sarcoinc.com

BREN MK1 LMG PARTS SETEvolution of the Bren stemmed from initial designs at the Brno factory in Czechoslovakia. After licensing, patent changes, and political inclina-tions, the British Commission brought the design to Enfield where production commenced in 1937. From then on , it is a story of Hell, Death, and Destruction…. As one of the finest machine guns put to use on modern battlefields. Bren Mk1 LMGs were the most expensive to make and perhaps the best looking with all of it’s intricacies . Timing of production was excellent as in less than 2 years, the ‘Tommy’ and Commonwealth soldiers would be carrying it into battle at Dunkirk, El Alamein, Borneo, D-Day and untold of altercations and sorties as the Axis powers were rolled up. Ultimately, it served with well over 30 countries and can still be found in remote regions. Our Bren Mk1 kit comes with all parts shown including a very good MK1 barrel, five - .303 magazines, and the original receiver cut in 4 pcs per the BATF requirement........................................................................................................................................................................................................................$649.95 BREN019

BREN LMG

NEW ITEM!

BREN MK 3 LMG PARTS SETRegarded as the lightest of the Bren Guns, the MK3 had light-ening cuts made to the receiver and usually was found with a barrel @2-3/4 inches shorter than the MK2 series barrel. Nevertheless, both sized barrels were used on this gun in WW2 . This model was envisaged as an answer for Airborne and Infantry troops fighting in the jungles of the Pacific, but actually once pro-duction started in 1943, it found its way to every theater of the war. Our kit comes with all parts shown including the correct receiver cut to BATF specifications, a very good condition MK2 barrel and 5 - .303 cal. magazines .........$495.00 BREN121MK3 Parts Set w/New MK2 barrel ...................................................$595.00 BREN125

NEW ITEM!

After over 50 years of search-ing for these on the international market, we’ve finally obtained the classic .308 Bren as used from the 1950s through the 1990s! Last major use was in the Falklands War, but they are still blasting away in the Congo, Sudan, and other hot spots.Predecessor to the MAG-58, the Bren .308 LMGs evolved in many versions, whether converted from existing Bren models or made completely new, these guns were a formidable improvement on the .303 models. Stalwart

enough for use in the Falkland operation where British 2 Para, employed them along side the MAG-58. The magazines were ideally made to interchange with the the L1A1 service rifle of the time. Sarco has obtained the Model L4A3 Bren Light Machine Gun and had the receivers cut to BATF specifications. All parts are included with the kit including the 4 pieces of Demil. Rec., new made short chambered barrel with all original fittings (some assembly required) , and we include 1 – 30 rd. .308 magazine! The quality of the kit is generally in very good condition with a new barrel. This would make a fabulous ‘semi’ build , or display gun. Get one while you can because they are quite limited! .......................................... $695.00 BREN122

NEW ITEM!

BREN GUN MAGAZINE CHEST WITH 12 .303

MAGS!

Original WW2 era Bren Magazine Chest with 12

good Bren .303 mags

$99.95 BREN005

RPG-2 Rocket Launchers…Crossed the Frontier & Have Arrived!!!!!!Original and In Virtually ‘Like New’ Condition !!!!!Light and streamlined, the Russian designed RPG-2 Rocket Launcher was effective against Infantry and Armor. Vietnam was a key testing ground for the real world employment of this weapon. U.S. forces gained an acute re-spect for the impact of this weapon which caused great anxiety for troops moving in M113 APCs and M48 tanks as well as Cargo trucks running back and forth from the DMZ. With it’s low profile and ease of loading, the RPG-2 maintained a sinister presence in the jungles of Vietnam and over the decades, it was effective throughout conflicts in Asia, Africa, and South & Central America.Sarco has obtained these RPG-2s from the Warsaw Bloc and they have been deactivated to BATF specifications. The launchers are in excellent condition and have a bore hole cut in the tube as part of the deactivation. Also a solid rod is in place within the bore as required. The trigger housing is functional, can cock and click with a trigger pull, and the front and rear sights are functional and have good spring tension. Also…..an RPG-2 Rocket without booster will fit into the tube just fine and it makes a fabulous display piece and is extremely realistic! Our stock is quite limited and we are not sure if we will be able to obtain more.

RPG-2 Launcher only .........................................$475.00 RL012RPG-2 Rocket (original body & fins with inert replacement war-head) If purchasing an RPG-2 launcher then the rocket is ......................................................................$75.00 each RL013***Rockets by themselves are ............................... $100.00 ea, Or 3 for .................................................................$270.00 RL005Rocket Backpack (for holding 3 rockets) ..$60.00 ea RL014Rocket Backpack with 3 Inert RPG-2 Rockets if purchasing an RPG-2 launcher ......................$199.95 RL015

RPG-2 Cleaning Rod Set $15.95 CLN151RPG-2 Gunners Spares & Tools Set ( 2 firing pin/spring sets, bushing, wrench, punch, combo tool ) ......$18.95 MISC451

Never offered before!

RL012

RL013

RL014 RL015

CLN151

.308 Bren / L1A1 magazines are here! Steel 30rd. magazines work with both the L4 series of .308 Brens and also the L1A1 Rifle. Can be adapted to work with the Metric FALs as well. Very good condition..............................BREN1241 magazine $39.00, 2 for $29.00 each, 10 for $25.00 each

BREN /L1A1 30RD., .308 NATO MAGAZINES

Bren MK2 barrel, NEW.................................$175.00 BREN066

BREN MACHINE GUN PARTSHere is a sampling of some of the parts we have. Please check our website for the extended list and also Bren MK1-3 & L-4 kits that we have in stock.Barrel Mk1 stripped ...................................$99.95 BREN110Barrel MK2 stripped ..................................$89.50 BREN111Barrel nut MK2 ..........................................$35.00 BREN013Buffer cup, brass .......................................$12.00 BREN086Buttplate MK2 ...........................................$12.00 BREN071Butt swivel.................................................$12.00 BREN109Buttstock Removal Tool .............................$18.50 BREN002Buttstock MK1 NEW w/all hardware....... $295.00 BREN120Extractor, .303 ...........................................$15.00 BREN020Firing Pin ...................................................$15.00 BREN054Front sight ....................................................$8.00 BREN082Grip, pistol MK1 new replacement .............$19.95 BREN117Grip, pistol MK2 new replacement .............$19.95 BREN118Magazine, 20rd .303 .....................................$8.00 BREN007Magazines, 12 in chest, .303 ......................$99.95 BREN005Rear sight assy MK1 ..................................$65.00 BREN047Rear sight assy MK2 ..................................$65.00 BREN048Recoil spring ..............................................$15.00 BREN025Trigger .......................................................$15.00 BREN037

BREN SPECIAL BOLT KITImperative to have these parts at the ready if you’re a Bren ‘Gun-ner’. This kit will help you defeat common action and extraction problems in short order and thus save your day of shooting! Original GI parts in Excellent condition ..........................$39.95 BREN113

BREN GUN ‘PULL THRU’ CORDOriginal Issue cleaning pull thru cord for the Bren LMG. $9.95 ea, 3 for $20.00, 10 for $40.00 BREN127

Purchase a complete package of RPG-2 launcher, 1 Rocket, Backpack, Cleaning Rod/ Gun-ners Spares & Tool Set for$625.00 RL016

RHODESIAN MAGAZINE CHEST VEST

Vest with shoulder and waist strap holds 4 – 30 rd. AK47 or 30 rd. FAL magazines. Good with many other magazines too! Best of all the fabric has the Rhodesian grass pattern cam-ouflage which is almost impossible to find.Rhodesian Chest Vest ......................................... $36.00 BREN129Also have these chest vests in the South Afri-can khaki color. Khaki South African Mag Vest ........................... $34.00 BREN130Very tough to find and a

requirement for the operation of the pistol.

We have a small quantity of original locking blocks used in conjunction with

the barrel. $75.00 Each MISC530

BERETTA 1951 / HELWAN PISTOL - LOCK-

ING BLOCK!

FRENCH LRAC-50 BAZOOKARarely seen since their use in Indochina, Algeria, and the Yom Kippur War, these rocket launchers were similar to U.S. Bazookas , but added a shield and optic housing. Very compact, they were easier to maneuver in tight spaces and primarily saw service with French forces in Colonial frontiers and the Israeli Army. Demilled to BATF specs. Sarco is the only place to get these! ........................................................................................$495.00 RL006 (non firing)Also… original LRAC-50 canvas Bazooka cover from the French Army in used service-able condition. Covers the launcher with shield attached. Very few................$65.00

MISC410

ROCK ISLAND ARMORY STANDARD 5” 1911 .45 ACPHigh Quality and Great Traditional Appearance• Beautiful GI Style Parkerized Finish • SPECIAL - 8 Round Magazine with Finger Rest

• 1911 A1 Style Sights • Long Milled Grooved Trigger - Consistent 51⁄4 to 51⁄2 Pound Trigger Pull • Flat Steel Grooved Mainspring HousingPARTS INTERCHANGABLE WITH U.S. G.I. • All Steel Ordinance Grade 4140 Steel - Made on Computer-ized Numerical Control CNC Machines • ISO 9001 COMPLIANT • ALL GUNS COME IN HARD PLASTIC CASE WITH MANUAL & SHELL CASING

5" Pistol Not CA Legal -

PLEASE NOTE :ALL PISTOLS Not for Sale in Massachusetts (Please Check Local Laws)

GUN037 - $385.00 (Extra 8 Round Mag. (Blued) $20.00 – RPM122) Pre-Paid Orders Add $15.00 for Shipping or Ask About UPS Overnight Saver for Faster Delivery

1911 FRAMES $119.95 GUN012Build your own custom .45Manufactured from 4140 Steel on CNC Machinery. Fully machined. Above frame with our internal parts kit ($89.95 value) for $184.95 GUN595

ROCK ISLAND 1911 MICROMAG 22 TCM / 9MMRandy from GunsForSale.com writes that this is a brand new 1911-style autoloader chambered in the new .22 TCM caliber. Rock Island Armory cartridge designer Fred Craig said the proprietary .223-based pistol caliber round sends a 40 grain jacketed hollow point bullet downrange at 2100 feet per second. The goal was to make a 1911-type pistol “with the same weight, but double the firepower and delivering more foot pounds of energy.” .22 TCM AND 9MM • 2 DIFFERENT BARRELS • Composite grips • 5 inch barrel TWO GUNS FOR THE PRICE OF ONE ! $599.95

$569.00 GUN442.22 TCM 1911 MID SIZETCM .22 Midsize standard model delivers blazing performance using a .22 caliber bullet that travels over 2,000 fps. The gun is outfitted with an original Armscor cartridge creaing excellent muzzle energy and light recoil making this a truly unique high-capacity pistol. 17 round capacity $574.95

$549.00 GUN570

ROCK ISLAND RAIL GUN - TACTICAL 2011A Real “Slab Side”! Full length, Squared Dust Cover with 1913 Picatinny Rail, mounted to a full-girth squared slide without lightening cuts. In addition to the upgrades on the original Tactical model, such as Skeletonized Hammer and Trigger, Beaver Tail Grip Safety, and Ambi-Thumb Safety, the 2011 Tactical also adds Tru Dot™ Night Sights as an option. with Tru Dot Nights Sights

$590.00 GUN430 $529.99 without Tru Dot Night Sights

$515.00 GUN431

MATCH GRADE ROCK ISLAND 1911’S JUST IN!!The Rock Island Match 1911This is Rock Island Armory’s top of the line 1911. The pistol is hand fit

for superior slide and frame match. Triggers are crisp with a clean break. The front fiber optic sight makes acquiring your sight

picture effortless. If you are looking for a great range gun for target shooting or steel matches for a great price look no further $649.99

$599.00 GUN384Parkerized finish, Semi auto, 5 inch battle Slide and frame hand fit, Skeletonized trigger and hammer, 8 round capacity mag, front sight is a dovetail fiber optic, rear sight is a LAP adjustable, checkered grips, ambidextrous thumb safety, beavertail grip safety.

“ROCK” OUT ON THE RANGE THIS SPRING WITH A NEW ROCK ISLAND!

DON’T FORGET!! ALL OUR ROCK ISLANDS COME WITH A LIFETIME FACTORY WARRANTY!

BLOW OUT

ALMOST

AT COST!

BLOW

OUT!

SARCO

EXCLUSIVE!

ROCK ISLAND TACTICAL 1911 .45 “The Hottest Seller Right Now” • .45 ACP • Semi Auto • 5” Barrel • 8 Round Magazine Capacity • Combat Sights - Dovetail • Beavertail Grip Safety • Skeleton-ized Hammer & Trigger (Target Grade) • Ambidextrous Thumb Safety • CA Legal

$439.00 GUN276ROCK ISLAND ARMORY 1911A2 2011 VZ SPECS: - 2dot adjustable rear sight with tru-glo high vis. Front sight- Front and back wide-angled slide serrations- Full dust cover rail to even the weight and reduce recoil- 13 round mag- ambidextrous safety- combat hammer- extended beavertail for maximum comfort and safety.- competition style over-sized magwell

BLOW

OUT!

BLOW

OUT!

$575.00 GUN577

ROCK ISLAND ARMORY 1911 MIDSIZE SPECS:Chambered in .45acp and outfitted with a shorter barrel, smooth wood grips and a parkerized finish 1911 Midsize GI. Faithful to the original 1911 design, the Standard GI is equipped with a 4.25 inch barrel, fixed sights, and an 8 round magazine.

$439.95 GUN038

9MM ROCKS1911 COMPACT TACTICALS 9MM3.5 inch barrel, Extended beavertail,Full guide rod, Snag-free combat style sight, Fully parkerized9mm $459.99

$449.00 GUN5689MM PARA (9X19)9mm Standard G.I. 5" $409.99

$399.00 GUN3419mm Tactical $450.00

$419.00 GUN342These are not for sale in California

BLOW

OUT!

BLOW

OUT!

ROCK ISLAND 1911 .45 COMPACTS – BACK IN STOCK!!STANDARD .45 ACP G.I.6 Round Mag., 31/2" Bull Barrel, Not CA Legal ......................$415.95 .............................................................................$399.00 GUN035TACTICAL .45 ACP 3.5" Barrel, Extended Beavertail Full Guide Rod Snag-free combat style sight, Fully parkerized ............ $449.000 GUN569

.22 TCM AMMO, ARMSCORSpecs: Caliber: .22 TCM, Grain Weight: 40 Bullet Type: JHP1875 Muzzle Velocity 1686 fps Velocity at 50 yards 1511 Velocity at 100 yards 312 ft/lbs Muzzle Energy252 ft/lbs Energy at 50 yards 203 ft/lbs Energy at 100 yards

$25.00/BOX AM144(50 to a box)

(this is not for 22.LR firearms) NEED SPARE MAGS? THESE JUST IN!.22 TCM / 9mm, 17 rd. Magazine - In Stock! .............$32.99 RPM290.45 1911 Compact Magazine ......................................$24.50 RPM1581911 Double Stack .45, 13 rd Magazine - In Stock! ....$24.99 RPM289

America’s Fascination with the 1911 .45 goes on. Back to the Basics with a “good ‘ol .45” at an affordable price.

GP1

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

www.e-sarcoinc.com

NICKEL ROCK ISLAND Same as the 5" standard in nickel ......................... $479.00 GUN383

1911A1 G.I. TYPE 45ACP• 45acp 5" barrel, Government size 1911• Matte blued finish • GI style external parts • Fixed rear dovetail sight & fixed post front sight• Vertical Rear serrations• Slightly beveled magwell to make magazine changes quicker & easier• Walnut, double diamond, fine line checkered grips$459.00 GUN646

NEW ITEM!

1911 HAWK (matte finish) 45ACP• 45acp 4.25” barrel, Commander size 1911 –• Matte blued finish• Novak LoMount style rear sight w/ dovetail front sight• Front and rear angled serrations• Extended slide stop & thumb safety for easy reach• 3 hole trigger & skeleton hammer• Beavertail grip safety w/ memory bump• Lowered & flared ejection port• Slightly beveled magwell to make magazine changes quicker & easier• Walnut, double diamond, fine line checkered grips$599.00 GUN647

NEW ITEM!

EAGLE (matte finish) 45ACP• 45acp 5" barrel, Government size 1911 - Matte blued finish • Millett, fully adjustable, white outline, rear sight w/ dovetail front sight• Front and rear angled serrations• Extended slide stop & thumb safety for easy reach• 3 hole trigger & skeleton hammer• Beavertail grip safety w/ memory bump• Lowered & flared ejection port• Slightly beveled magwell to make magazine changes quicker & easier• Walnut, double diamond, fine line checkered grips$599.00 GUN648

NEW ITEM!

THRASHER (matte black) 45ACPThrasher is matte black in finish. This model comes with Walnut large diamond grips. It has the following features: • Weight: 1.9 lbs.• Barrel length: 3 1/8” black bull barrel• Frame and slide are 4140 CNC machined steel• Capacity: 7 + 1 (45acp)• Capacity: 8 + 1 (9mm)• 2 stage recoil spring system• Military style trigger• Beavertail Grip Safety with memory• Military style fixed front and rear sights• Military style thumb safety• Ejection port lowered and flared• Beveled magwell $524.00 GUN650

NEW ITEM!

THRASHER SS POLISHED - 45ACPThrasher SS Polished is of a stainless steel construction with a polished finish on the sides of the frame and slide. The top of the slide is satin in finish. This model comes with beautiful Rosewood double diamond, double border grips with owl head logo.• Weight: 1.9 lbs.• Barrel length: 3 1/8" black bull barrel• Frame and slide are 416 stainless steel• Capacity: 7 + 1 (45acp) - Capacity: 8 + 1 (9mm)• 2 stage recoil spring system• Beavertail Grip Safety with memory• Military style fixed front and rear sights• Military style thumb safety• Ejection port lowered and flared• Beveled magwell

NEW ITEM!

$699.00 GUN649

GUN636 - Mid size, standard 1911 frame,.45 cal. parkerized.For 7 rd. magazines and 4.25" slides .................................................................$129.00

GUN637 - Mid size, Tactical frame with full length rail, .45 cal., parkerized. For 7 rd. magazine & 4.25" slide .................................................................$149.00

GUN638 - Full size, standard Tactical frame with ser-rated front strap, .45 cal., parkerized ........$139.00

GUN639 - Compact size, standard Tactical frame, .45 cal., parkerized. For 6 rd. magazine & 3.5" slide ........................................................................$139.00

GUN640 - Wide body, standard GI frame, .45 cal.,parkerized ..........................................$169.00

GUN641 - Full size, standard GI frame,.45 cal., parkerized..................................................$129.00

GUN642 - Full size Tactical frame with rail, .45cal., parkerized ................................................$149.00

GUN643 - Full size wide body tactical frame with full length rail, 9mm cal., parkerized ...............$175.00

GUN644 - Full size Tactical frame with full length rail, .40 S&W/10mm cal., parkerized ...............$139.00

GUN645 - Mid size Tactical frame with full length rail,.40S&W/10mm cal., parkerized .................................................................$139.00

ROCK ISLAND & ARMSCOR FRAMESQuality ‘Armscor’ 1911 frames in standard full size, compact, midsize, and tactical styles. These are precision CNC machined from castings made from ordnance grade steel. Great chance to obtain a high precision, carefully machined, quality frame for your ‘1911’ build! And all have correct ejectors installed! These are closeout prices and may never be available again!

NEW !!! IVER JOHNSON 1911's IN STOCK !!

PANZERSCHRECK ‘PROJECT’ KITWe have a splendid kit for making the venerable German WW2 Panzer-schreck Rocket Launcher. This kit will save you money and allow you to apply your own skills of metal work and light welding to create a non- firing replica! Kit contains steel main tube of @60 inches, metal blast shield, sights and various other parts to recreate this devastatingly destructive device that brought fear and respect from ‘tankers’ everywhere. Some skill with metal cutting, refitting, welding needed to complete this kit. We are working to bring inert reproduction rockets in and will post them in the ‘Firearms News’ as soon as they are available. Panzerschreck Kit ................................................ $225.00 MISC504

NEW ITEM!

Save yourself $100!

S&W MODEL 10 SHOULDER HOLSTERAviators revolver holster w/ shoulder strap. New & U.S. embossed!.....$24.00 HOL110

1916 MODEL 1911 HIP HOLSTER Our standard grade durable 1911 holster with leg strap. Excellent value. ...................$17.50 C45112

U.S. M7 SHOULDER HOLSTER Standard grade WW2 style leather holster with shoulder & chest strap. Right hand draw...$29.95 HOL067

M3 GREASE GUN (REPLICA)We have a small number of rep-lica M3 Grease Guns that are made of metal! Really, the only full size & best reproduction on the market, and it shoots Airsoft 6mm BBs. Comes with magazine and stock. Sorry, no flash hiders available at this time. Also comes with rechargeable bat-tery and charger. Looks Very Realistic!!! Check local laws in your area before ordering .......................... $370.00 REP25

PTR91 G3 RECEIVERThis US MADE receiver will work on your G3, HK91, PTR91 and CETME builds. Manufactured by PTR91 in Farmington Connecticut on HK factory tooling and equipment to exact HK specifications. Just like when building a house, the foundation must be strong and to exact measurements; this receiver will do the same for your build. Nothing but the very best in the market - that is the PTR91 receiver. Do not confuse this receiver with out of specs, cheaper receivers in the mar-ket. Start on the right foot and you will be proud of your finished product, further more, your build will have a higher re-sale value than any other build that has a less desirable receiver. No matter how you look at it, starting with this receiver is a “ win win situation”. Get them while supplies last!!! $239.95 GUN445 Note: Receiv-ers not sold together with kits.

GUN ORDERING INFORMATION• Call our Ordering department, (610) 250-3960,

Monday – Friday 8:30 to 5:00. All guns can only be shipped to FFL Dealers. All firearms laws apply. Please review your local & federal laws. Please Note: All firearms, frames & receivers should be checked or assemble by a competent gunsmith before firing.Include daytime phone number with your order.

• Guns can be ordered via credit card (Visa or Mas-terCard only), check, or money order.

• Sorry we do not do COD’s. A Note On Shipping Costs: (approximate)Rifles: One rifle averages $15.00 to $20.00

+ insurance 3 rifles average $22.00 to $35.00 + insurance

Pistols: via USPS - 1 pistol averages $20.00 to $25.00 + insurance via USPS - 3 pistols averages $35.00 + insurance via UPS - 1 pistol averages $25.00 to $50.00 + insurance via UPS - 3 pistols average $70.00 to $80.00 + insurance

Pistols to California (UPS only) about $55.00 to $60.00 + insuranceHawaii & Alaska - via USPS - Pistols $25.00 - via UPS Red - $90.00UPS Rifles - 1 rifle $45.00 to $50.00, 3 rifles $90.00 - $95.00

Pennsylvania residence please add 6% sales taxAll charges are charged at actual cost of shipping & handling. Above information is for your reference and reasonably accurate. For orders with check or money orders, include sufficient shipping - low range is East Coast and high range is West Coast. All guns can only be shipped to FFL Dealers or C&R Collectors for C&R guns. All firearm laws apply. Please review your local & federal laws. Massachu-setts no pistol or pistol frame sales. California Pistol must be on approved list.

In accordance with California state law, pistols can no longer be shipped to California by means of the US Postal Service. All pistols will need to go UPS Overnight or Overnight Saver.Due to US Postal Service regulations, pistols, revolvers, and other firearms capable of being concealed on the person are NOT PERMITTED to be mailed unless they are mailed to a manufac-turer or dealer. C&R license holders are not dealers and there-fore cannot receive these firearms through the US Postal Service. C&R license holders that wish to purchase pistols, revolvers, and other firearms capable of being concealed on the person will have to have them shipped via UPS Overnight. PLEASE NOTE THAT SHIPPING CHARGES ARE NOT REFUNDABLE IF YOU ARE NOT SATISFIED WITH YOUR PURCHASE. Please Note: Prices in our ads are those for shipments to FFL dealers – You may have your choice shipped to your dealer. Some may vary from prices in our showroom due to additional over head and processing costs.

ROCKOLA M1 CARBINE RECEIVERSNew production milled from 8620 billet stock. Exact cur-rent production of the G.I. Rockola Contract gun. Minute attention to original detail by a compulsive “get it right” manufacturer. Special Introductory Price!! ......................$299.00, 3 for .................................................................. $874.95 GUN535 Currently out of production. Only a few left!

COMPLETE MAUSER ACTION, FULLY MACHINED & FORGED, LARGE RING EUROPEAN COMMERCIAL ACTIONS MANUFACTURED BY THE FAMED FIREARMS MAKER DUMOULIN OF ‘BELGIUM’

RECEIVER: This is an A-2 steel, forged / heat treated body which has been checked and gauged after each machining operation ensuring precision with strict tolerances and ultimately, superb mating with attached parts and adherence to Engineer drawings.BOLT: A-2 Steel, one piece bolt ,handle & knob with checkered flat on underside. The extractor is the traditional proven, ‘claw type’ extractor. Bolt Head diameter is set for the .30-06 family of cartridges. (A2 Chromium/molybdenum/vanadium is tool steel).RECEIVER SPECIAL FEATURES: Flats with threaded holes and dovetails, permit the use of a variety of rings and bases. This feature eliminates the need for screwed on bases. Each flat is predrilled and threaded for standard 6-48 screws in 2 places. Flat tops are parallel and at the same level. These Actions have been engineered from original FN Belgian blue prints.TRIGGER MECHANISM: The trigger is fully adjustable for sear engagement, over travel, and creep. The trigger body is made of steel.TRIGGER GUARD: This trigger guard is fully machined from a steel forging and has a hinged FN/ Ruger style floorplate and latch. Believe it or not, I priced a similar trigger guard at the Shotshow from a German supplier and they wanted $800 for the guard. The Action capacity is 5 rds. of .30-06 length ammo.FINISH: These Actions and Guards are blued. Some have bright bolts.RECEIVER THREADS: Threads are standard 1.10 x 12 TPI.

BOLT-SPECIAL FEATURES: Strength of the forged bolt exceeds that of bolts in normal production. The specially designed bolt sleeve is an FN type and incorporates a Winchester style side swing 3 position blocking safety. This type of safety allows the use of a single or double set trigger in complete safety and preventing a discharge. Currently a similar bolt sleeve sells for $150.00-$250.00 separately.WHY PURCHASE THIS ACTION? To our knowledge, no one in the world presently makes a fully machined ‘98 Mauser action. Cost would be prohibitive! Just the value of the bolt assembly & trigger guard equate to more than our cost of the action. This may be your last chance to buy a fully milled ‘98 Mauser Ac-tion! *We know of no fully milled actions being produced in the world. These were produced many years ago and we bought the entire lot for posterity. These are the same actions Dumoulin uses to build their $10,000. rifles!WHAT DO THE PROS SAY? - We gave some of these actions to one of the best barrel manufacturers in the U.S. , a Custom Rifle Mnfr., and an exceptionally talented gunsmith who prepares gunsmithing school courses, to see what they thought. They praised these actions and commented that, according to nor-mal gunsmithing practices, the following should be observed where building a rifle:1. Lap the bolt lugs & receiver locking recesses for full contact and improved accuracy.

2. Face off and true the front of the receiver.3. Shape the feed ramp.4. Checking the bolt face to make sure it is square & true.5. Like any other high end firearm, these actions require your final hand fitting and tuning. These are not operations that a machine can do and are best left to the assembler.NOTE: The hardness of the receiver & bolt were checked and are at RC47/48. (Optimal!)HERE’S THE DEAL: We would NOT be embarassed to offer these actions at $595., but we will pass our lucky buy onto you at the fabulous price of only $349.95 GUN567 as an introduc-tory price. Price may go up later if we find we are too generous!DUMOULIN BARRELS TOO!We lucked out and purchased some barrels that were spe-cifically made for these Dumoulin Mauser actions. They are threaded to the standard Mauser dimensions of 1.10 x 12 threads per inch. We can offer the following caliber barrels:.270 Winchester - Almost Sold Out! ............ $84.95 MSR602.30-06 - Almost Sold Out! ........................... $84.95 MSR601Note: these barrels were purposely made with a .010" oversize thread OD for the tighter fit & more accuracy. They screw on just fine with proper barrel installation equipment. The shank length is .003" longer than receiver depth from front of receiver collar which is the proper thread crush for barrel seating. We also stock Dumoulin parts-See our 10th ad or visit our website!

FOR INQUIRIES ON WHERE TO GET SCOPE RINGS, PLEASE CONTACT:Andy Huebschmann, PresidentSunny Hill Enterprises, Inc.triggerguard@sunny-hill.com(920) 898-4707

Building your own Sniper, Target, or Varmint rifle has never been so enticing! Sarco worked for over a year to bring you this colossal opportunity to own a brand new, complete Dumoulin Mauser action at the best price on the world market!!!!! Let’s get to the objective specs, on what this means for you:

Go to www.dumoulin-herstal.com for more information

We have struck a special deal with ER SHAW, INC. for their barrels and gunsmith-ing services. We will include a flyer with the speical prices with each Dumoulin action. Note: This offer is between the customer and ER SHAW, INC. Please contact them regarding work to be done. We will not ship actions to ER SHAW, INC.

REBEL ARMSPlease check our website for our Rebel Arms program.

DINOSAUR SALE! We have a few detachable magazine C96 frames. This Mauser model is Model 1932 (Fed Ord calls it model 713 on the frame). These frames are new pro-duction of 30 years ago. Frames marked Fed. Ord. Frame only $495.00 GUN366These frames will accept a standard C96 barrel and extension with slight modifica-tion to feed lips (Thanks Tom). Build your own 20rd detachable mag semi Schnell-feuer. Takes standard Mauser 20rd or 10rd mag – Mag not included.

6 types of PARA / 1911 style Frames, completely machined and ready for assembly with your parts! Part of our ongoing program to bring you one of the hottest model 1911 type ‘builds’ on the market. We’ve got Single Stack, Double Stack, Pro Custom, and even some Black Ops models with light rails and more. Many of these are in very short supply so move quickly to get the ones you want. Those in short supply have a part # fol-lowed by asterisks****. When these are gone… they are gone for good so act fast…….

PARA EXECUTIVE CARRY- Single action w/ bobtail full sized grip and short dust cover for 3" slide. Frame #LG 3" w/anodized finish. Aluminum frame, single stack. Normally retails $214, Sarco’s price .......................................... $150.00 GPARA708 PARA BLACK OPS 1445 - double stack single action w/light rail. Frame#644 w/Ionbond finish. For 5" slide and standard 14rd double stack magazine. Normally retails at $313. Sarco’s price. .....................................................$200.00 GPARA025

1. PARA EXPERT 1911 – for 5" non-ramped barrel, some-times referred to as ‘GI Expert Model’. Single action and takes standard 7-8 round magazine, no ramp, carbon steel, clear nitride finish. Frame #660 .......................................$125.00 GPARA000 2. PARA 1911 ELITE OFFICER – For 3.5" ramp barrel cut. Single stack, single action, stainless steel. Accepts standard 6-7 rd. mag. Frame #645 w/Ionbond finish. Normally retails $264.00, Sarco’s price .......................................$160.00 GPARA6353. PARA WARTHOG P10 – For 3" ramped barrel. Frame #018, alloy w/ anodized finish. Double stack, single action and accepts 10 rd. .45 mag. Normally retails $240.00, Sarco’s price .......................................$150.00 GPARA6504. PARA ELITE 1911 – for 5" ramped barrel. Single stack, steel. Can be used for Elite or Elite Target models. Can also be cut down for Elite Commander 4.25" model. Stainless steel in Flat Dark Earth finish. Single action and accepts standard 7-8 rd .45 mag. Frame #630. Normally retails $254.00, Sarco’s price is ............................................................. $125.00 GPARA856

Note - where designated as ‘ramped barrel’, it refers to the common ‘Clark©’ style ramped barrel.

1.

2.

3.

4.

PARA ORDNANCE FRAMES

GP250 Hilton Street, Easton PA 18042610.250.3960 Fax: 310.250.3962

www.e-sarcoinc.com

1903A4 U.S. SPRINGFIELD SNIPER RIFLES

Small lot available. These rifles have original 1903A3 G.I. receivers and most parts are original G.I. They have a new criterion 4 groove barrel identical to the original. The scope is an exact repro of the M73 B1 scope by HiLux with some current technology internal improvements. External is ex-act repro. These guns are produced by the acclaimed Rock Ridge machine & are fully approved for CMP vintage sniper rifle matches. Scope mount is an exact repro—stock is beau-tiful “C” type full pistol grip stock. Rifle is fully parkerized ............................................................$1395.00 GUN564

12 GA. PASI1 TACTICAL SHOTGUNTHE LATEST SARCO SLEEPER DISCOVERY

This may be the BEST Shot-gun Deal on the market!

Proven reliability and afford-ability in one 12 Ga. Pump action shotgun holding 4 rds in

the tube and one in the chamber. Barrel is machined from 4140 steel, honed & chrome lined in similar fashion to premium rifles. Dual

action bars are CNC machined and heat treated, bolt chromed and treated for low luster finish and the overall finish is black. Additional notable features include an

easy point bead front sight, oversize 2 position cross bolt safety, 18.5" barrel, fixed recoil reducing stock and smooth operating trigger. All of this jammed into an ‘easy day’ carry

weight of just 8 lbs. Manufactured by ASI, they are known for using only the highest quality materials! This price is just too good to pass! $179.00 each, 3 for $495.00

GUN571 FFL Dealers call for prices!

with proper M73B1 Scope!

CHINESE TOKAREV 213 FRAMEGreat deal on original Chinese Model 213 frames! Perfect for a pistol build at an unbeatable price. Used in good condition. While they last! ....................................................$9.95 GUN256

CETME C .308 RECEIVERFully formed steel receiver ready for parts installation. Just in and a perfect way to complete your parts set! In the white. New mnfr. & made in the USA! ....$239.00 GUN654

(Note: receivers not sold in conjunction with parts sets)

After decades there is

finally a square bridge Mauser

available for you!

BRITISH ENFIELD BUILDERS PROJECTSBUILD YOUR OWN GOODIE FROM YOUR OWN

PARTS, STASH & “BUY INS”. BARRELED RECEIV-ERS AND RECEIVERS FOR #3 (& #4 ENFIELD &

308 2A) JUST IN THE DOOR1. Barreled receiver for #1 MKIII Enfield ...............................$49.95 GUN5362. Barreled receiver for #4 Enfield ...............................$49.95 GUN5373. Barreled receiver for model 2A .308 cal (762mm) Enfield ......$59.95 GUN538 4. Original #4 MK1 Enfield receiver, VG cond ........................$29.95 GUN656

WE BE DIGGIN’!Found about 50 P-17 .30-06 Enfield ac-tions. Most parts are new. Receivers have been sand glasted. May have some minor pitting, mostly below stock line. We would build these into guns but don’t have the time. P17’s are $500 to $800 now. Action only ............................$175.00 ea, 3 for .................... $495.00 GUN655

Would you believe each re-ceiver spends 3 hours on the CNC machine? Man, that’s a

worthy project!

1903A3 SPRINGFIELD RIFLES FROM ‘THE PACIFIC’A small number of good condi-tion, firing rifles from the HBO series, The Pa-cific, are still available. These were wartime rifles that served again in the filming of the mini series. Most are Smith Corona or Rem-ington. Stored since the filming, and each rifle is sold with certifi-cates of Authenticity, certificates of formal handling from Customs documents, Armament prop handlers, and the production firm. Chain of custody is fully authenticated and Sarco was the supplier and final recipient after production. A rare chance to obtain a piece of movie memorabilia and an actual firing 1903A3 Springfield. (FFL required) ..........................................................$895.00 GUN369

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

www.e-sarcoinc.comJUST IN! L.E. BUY BACK FIND. SMITH AND WESSON M&P 40 PISTOLS.PA DCNR Parks Commission Guns.Laser Engraved DCNR Keystone Logo..40 S&W Caliber. 4.25 inch barrel.Trijicon Tritium Night Sights. 50%–60% life left.Used: VG+ —Excellent Condtion. Holster Wear. Comes with 2 magazines, 2 Palm Swells, Original Case and Manual.GUN598 $295.00 or 3 for $849.00 NEAR OUR COST! EXTRA MAG $15.00 (WHILE SUPPLIES LAST)

NYLON 66 .22 LR 20" BBL, Tube Fed 13 Rd. Black Stock, Bright Chrome BBL and RECV. Used: Good—VG GUN600 .......... $395.00

Brown Stock, Blued BBL and RECV. Used: GoodGUN601 ............................................... $250.00

ATTENTION COLLECTORS

THE RENOWNED FULTON ARMS M14 RECEIVER There’s a reason that we are still using the M14 platform 50 years after its adoption..... IT DELIVERS! Whether you’re a military contractor heading to Iraq, Afghanistan, Kurdistan, Somalia or American marksman looking for the basic or Sniper based Plat-form, this is a Solid Great Deal. We offer 4 flavors of Semi Auto M14 Receivers precision made utilizing 8620 Alloy steel, precision geometric CNC processing from Lost Wax Investment Castings & made in the USA! Properly heat treated & core hardened to Mil Specification. We have 4 flavors of receiver:A. M14 Semi Auto Receiver, marked U.S. Rifle 7.62mm M14 .......................................................................................................................$549.95 GUN581B. M14 Semi Auto Receiver, marked U.S. Rifle 7.62mm M21 (NJ compliant) ................................................................................................$549.95 GUN582C. M14 Semi Auto Receiver, with rear lug/ threaded 1/4-28 for stabilizing receiver bolt, marked U.S. Rifle 7.62mm M14 ............................$699.95 GUN583D. M14 Semi Auto Receiver, with rear lug/ threaded 1/4-28 for stabilizing receiver bolt, marked U.S. Rifle 7.62mm M21(NJ compliant) .....$699.95 GUN584*Always assemble receiver with parts, by a qualified gunsmith who can check head spacing & fit for safety.

MITCHELL ARMS .22 CALIBER PARTS AVAILABLESarco has parts for the following ‘Mitchell Arms’ .22 cal rifles – Please check our website for details:M16A1/22 AK47/2 GALIL .22

ORIGINAL BRAND NEW FROM THE FN BELGIAN FACTORY 15 PLUS YEARS AGOThese have been buried in the pile for years! Original Belgian made brand new in the white Browning A5 12 gage Humpback Automatic Shotgun stripped receivers Need a little final polishing and blueing. These were acquired years ago in a factory clean out. They were made by FN in Belgium and were found in an old warehouse where they had been stored for some time. Each receiver is marked FN and is fully machined and threaded where required. Receivers are marked with the original im-porters name and info ................................$39.95 GUN056Note: Have a good quantity if you want ‘em for a project!

AR LOWER RECEIVER & KITGreat Deal on Bushmaster lower receiver. Just ......................................$79.95 GUN574As a kit, we offer the Bushmaster lower receiver with the lower receiver internal parts, grip, and collapsible buttstock, recoil spring and buffer .......................................... $139.95 GUN579

GOOD OLE’ DAYS #398 Mauser Model 1938 Large Ring Long Action (Action & Receiver) Once again available – we haven’t sold these for years now. Original European made actions by Great Firms as DWM, Mauser, etc Built at the height of Mauser produc-tion. Actions are with all milled parts – May have minor pitting. Less than 100 left!! While they last ............................................................................. $145.00 GUN004

GOOD OLE DAYS #5Original Chinese SKS Barreled Receivers

Bought from Brickless Trading 20 years ago – been sleeping for years. Good condi-tion. Build your own Chinese SKS. Buy the whole assembly for the price of a barrel! .................................................... $79.95, 3 for ........................................................................................... $224.95 GUN531

1903A3 SPRINGFIELD RIFLEThese guns have new 03A3 barrels with 1940s production dates. Overall excellent condition. Most parts are “like new” G.I.! Superb Guns! $595.00 GUN325 SEE OUR WEBSITE FOR OTHER PICTURES.

FOR OUR SPRINGFIELD RIFLE BYERS Your choice of an original straight stock or a new production “C” stock. Every gun has been head spaced.

PARA ORDNANCE MAGAZINESBrand new batch of original Para Ordnance magazines has arrived!RPM295 14rd .45 cal double stack for full size P14 series, Blue steel w/numerical round markings ................................................................................................ $29.00RPM296 10rd .45 cal double stack, for full size P14 series, blue steel with numerical round markings ................................................................................................ $28.00RPM297 8rd .45 cal single stack, for full size Govt. 1911/Para. Blue steel w/ numerical markings ................................................................................ $24.00RPM298 8rd .45 cal single stack, for full size 1911, Blue steel with round markings. Made by Checkmate ................................................................................ $24.00RPM304 12rd .45 cal double stack P12 ................................................................. $28.00RPM305 13rd .45 cal double stack P13 ...................................................$28.00RPM310 PARA ORDNANCE WARTHOG MAGAZINE, Original 10rd, .45 cal. magazine, Black ........................................................................................$37.50 PARA310 PARA ORDNANCE ALUMINUM MAGAZINE WELL, Aluminum magazine well helps funnel the magazine Quickly. Comes with steel pin Black .................................................................................................$25.00PARA309 PARA ORDNANCE ALUMINUM/NYLON MAGAZINE WELL, Fully machined aluminum magazine well with nylon base plate to help funnel magazines in place and reduce metal wear on the magazine during speed loading ................................................................................................... $44.95

Stunning Price Busting Deal of 2015!PARA ORDNANCE LDA PISTOL PACKAGE

Brand new LDA complete Frame assembly in original Para Ordnance box! You can purchase this alone or reap tremendous savings on purchasing this with a SLIDE of your choice. The Para steel Frame accepts 3.5 inch and 4.25" slides and can be used with 3" slides if the hood is trimmed back - Will not work with a 5” slide. The frame is the Officer’s Model LDA, single stack, and is not caliber specific so you can customize it to 38 Super, 9mm, 40 S&W, .45 ACP. The frame is cut for the Clark® type ramped barrels. The barrels and recoil spring assemblies are available from numerous commercial sources and the frame accepts the shorter 1911 Officers magazine. Enormous savings will be realized when you examine these prices against the price of a new LDA pistol of at $700-800!1. Frame assembly in box NEW $195.00, 3 for $549.00 GUN5882. Slide of your choice – 40% off retail price online! Go to our website and choose from a host of 3", 3.5" & 4.25" Para LDA slides. Valid on up to 10 Para LDA slides when purchased with Frame assy in box. Go to www.e-sarcoinc.com to make your selection.Note: Para Ordnance Light Double Action Pis-tols are premium com-pact firearms popular for ‘concealed carry’ and well respected for quality and performance. Para Ordnance has been ab-sorbed into Remington, and Sarco will also have a position in selling many of the original quality parts. In fact, our substan-tial inventory of Para Ordnance parts, will allow us to supply parts for many, many years to come!

THE ACCLAIMED COONAN FAL RECEIVER IS AVAILABLE AGAIN! OVER 100 IN STOCK!Highest quality made on precision CNC machines to high tolerances. Black parkerized finish. These receivers will work with any metric FAL kit. Many have compared the qual-ity of the Coonan receiver to the old “Gear Logo” Imbel receivers. Attention Argentine kit builders! These receivers are cut to clear the hammer pin on Argentine lowers! Note: The rear foot on the rear of the receiver may need to be slightly trimmed to properly lock on the Argentine lower. We have machined a witness mark to show how much you might need to trim (a Sarco exclusive).GUN367 – Receiver with carrying handle cutGUN368 – Receiver without carrying handle cutEither receiver ................................................................................................................................................................. $325.00 3 for ................................................................................................................................................................................ $945.00

WE HAVE BEEN WORKING OUR PILE OF OVER 50,000 GUNS. WE FORGOT WE

HAD A LOT OF THESE GOODIES Original 1898 Krag receiver from old, old, old government auction. Very good condition .............................. $49.95, 3/ ........................................$139.95, 10/ ..........................$299.95 GUN549

GALIL .223 RECEIVERSWe found you small lot of Galil .223 receivers. Only a few available .........................$399.95 GUN289

STAR MODEL B – “SECOND MODEL”Production started in 1931 and ended in 1983 9mm para blue finish. Good bores. Good – VG $219.95 GUN438

STAR BSThe BS in a normal second model B but has the addition mag safety. Made from 1957-1983Good-VG $239.00 GUN434

SKS RIFLE STARTERS KIT Our SKS barreled receivers with all the below parts included: • Take down lever • Front sight base • Stock & handguard set • Rear sight assem-bly • Spike bayonet • Piston extension • Piston return spring • Hold open latch • Bolt • Firing pin

EXTRA SPECIAL! We’ll also include FREE: • Gas port cleaning tool • Cleaning kit pouch • Stripper clip • Cleaning jag • 2 leather sling tabsAll this including the barreled receiver for only $124.95, 3 for $349.95 GUN563You get the fun of hunting for the rest

Cash or trade for your transferable machine guns – only legal guns –

call MG Dave. We’re buying!! Form 5 (unserviceable) guns acceptable.

STAR BMSteel frame, 4" barrel plastic gripsGood $239.00 GUN440

IMAGINATION IS NOW THE MOTHER OF INVENTION!***What could you build with a 93’ Mauser Action ?***That unusual or unorthodox firearm design you’ve longed to build, could just be a little closer to reality if you use our Mauser1893 Receiver. The opportunity is here and at a price designed to fit anyone’s wallet!Cholly has dreamed of a ‘Camp Gun’ project for years and has been putting away small ring short Mauser actions. We now have come to market with the concept, but no time to do the project. We will build a ‘camp gun’ when the time opens up! This project lends itself well to creating a short barrel, lightweight gun built on a small ‘action’ similar to the classic German G33/40 mountain carbine. We can offer you the receiver by itself or a complete Receiver & Action.RECEIVER alone: $20.00 Ea, 5 for $90.00, 10 for $160.00, 50 for $750.00 GUN594RECEIVER & ACTION: $75.00 Ea , Or 10 for $650.00 GUN653If you like the Flash Hider shown in the picture to the right, we can offer it to you at $9.95 each, or 3 for $24.95 with a purchase of a 93’ Mauser Receiver TOK087Note: When building any gun, seek advice of a competent gunsmith or expert, especially in experimental projects.

GP3

RE: RETURNED FIREARMS, SARCO IS NOT RESPONSIBLE FOR ANY RETURN TRANSFER FEES. BEFORE RETURNING ANY FIREARMS TO SARCO,

CALL AND GET AN RMA NUM-BER FROM THE GUNROOM.

THE LAST OF OUR ASSORTMENT OF .22 RIFLES! MOST HAVE SOLD OUT (few remaining)GUN627 Winchester Model 290 - 22LR, Semi auto tube fed 15 rd., 20”barrel. Good to VG, checkered stock & handguard ............................................................................................... $169.95GUN600 Remington Nylon 66 -.22LR, 20” barrel, tube fed 13 rd. black stock, chrome barrel & receiver. Good/VG .............................................................................................................. $395.00GUN601 Remington Nylon 66 - .22LR, 20” barrel, brown stock, blued barrel & receiver. Good/VG .............................................................................................................................. $250.00GUN624 Remington Model 550 - .22LR, semi auto tube fed w/ shell deflector. Good condition .............................................................................................................................. $124.95

LOST TREASURE FOUND! 98% Finished Original Con-tract FN Mauser commercial receivers.............$100.00 GUN058

BULGARIAN MAKAROVS GUN466 $299.95 each, or

buy 2 at $290.00 ea.• Excellent- New Condition •

9x18 Makarov • Will be shipped with 2 grips, 1 (black) and

1original (brown with star)• Comes with 1 magazine, holster and cleaning rod

• Add extra mag for $19.95 each • Add a lanyard for $4.95 • Hand select available for

additional $19.95

These rifles feature all new parts with fully heat treated receivers and black composite furniture with heat shield. Bolt hold open , recoil buffer, cleaning kit and one mag. $499.99 GUN578(we also have some CA. Com-pliant rifles available) For an additional $30.00

I.O., INC. AKM247 RIFLEBack In Stock! AKM247 (AK type) rifles

7.62x39

August Sale!10 receivers for $249.50

SARCO, INC.SARCO, INC.E-mail: info@sarcoinc.com

323 Union Street • P.O. Box 98 • Stirling, NJ 07980 www.e-sarcoinc.com/www.sarcoinc.com www.e-sarcoinc.com/www.sarcoinc.com

908.647.3800 • Fax: 908.647.9413Phone Orders & Inquiries • M-F 8:00am – 4:15pm (EST)

Close out assortment of the famous “Janes Books”, regular prices were $200 to $400 EACH. We bought a tractor trailer load, we will sell you 10 volumes ALL DIFFERENT for $100.00. GOD10, Buy 10 lots at $50.00 per lot. All volumes are new old stock.

G.O.D. is a perfect place for

that Santa Clause money you can’t figure out what to do with!

Remember the Mitchell Arms guardian angel?We’ve got all the felt covered and satin lined boxes, we’ll also throw in an original guardian angel gold medallion. A $20.00 value per box. GOD2010 boxes with medallions for ...................$40.0025 boxes with medallions for ...................$75.0050 boxes with medallions for ................ $100.00

Brand New Original Shotgun Parts Special:Good Assortment: $200.00 worth of newRemington 11 Parts GOD22 .............................$69.95$200.00 worth of new Remington Model 31 Parts GOD23 $69.95$200.00 worth of new Stevens 520/620 PartsGOD25 ............................................................$69.95$200.00 worth of new Win. M97 Parts GOD26.......................................................................$69.95Super Special, All Four Lots for GOD27 ..................$235.00

Aircraft Recognition Cards. U.S. Military issuedeck of cards for teaching G.I.’s to identify friendly and enemy aircraft. Most Soviet and NATO planes and Helicopters shown. New, sealed decks. Good item for resale at modeler’s shows, flea markets, gun shows, etc. Reg. Price $4.95/deck, GOD28

10 decks for $17.5025 decks $37.50

50 decks $62.50100 decks $100.001000 decks $750.00

9mm Luger (Parabellum) Cal. Stripper Clips. Forpistols or SMG’s, brand new, only your imagination limits the use of these. An unbelievable bargain, but we have a truckload of ‘em. Regular price $3.00 ea. GOD42 Steal’em away at G.O.D. Prices: 50 for $12.50, 100 for $20.00, 500 for $90.00, 1000 for $150.00. (Thats only .15 cents each! ) Note: Also used for 7.63 Mauser, 7.62 Russian Tokarev.

Original Remington Brand New Factory Rifle andShotgun Parts. Miscellaneous assortment, steal‘em at $200.00 worth for ...........$45.00 GOD43

Gamblers Delight. Send us $1,000 and we’llsend you a 4’x4’x4’ (approx.) pallet chocked fullof goods. No C.O.D.’s on this item. GOD44May be slow to ship due to necessary sorting.Truck shipment only.

100 Pounds of Canvas Goods & New MilitaryTrousers & Shirts. All military and armamentrelated. Gun covers, barrels covers, kit bags, toolbags, parts bags, etc. Variety included. This hasto be worth 5 more times then what you are pay-ing. May be slow to ship due to necessary sorting.Truck shipment only on orders over 199pounds. Max. buy 200 lbs. 100# for $100.00 GOD48

ORDERING INSTRUCTIONS:1. ORDER ONLINE! Go to www.e-sarcoinc.com and place your order online securely and conveniently! Please note - G.O.D. orders will take longer to fill than regular orders so shipping time will vary. 2. Tele-phone orders accepted between the hours of 8:00 AM and 5:00 PM (EST) Monday - Friday only. 3. Mail your order in with a personal check or money order! Please print all orders & inquiries (we have to read hundreds every day.) On your order, list item & part number (GOD###), price, the amount of money enclosed includ-ing shipping and handling, and your name & address. 4. No C.O.D.s 5. PA residents add 6% sales tax.

Gun Show Traders. This is a fabulous oppor-tunity to load up your tables with those little “Goodies” that make your show expenses. When we did the shows years ago, this was the “bread & butter” of our business.

100 Miscellaneous ‘98 Mauser Parts. MilitaryIssue parts from ‘98 military Mausers. Brands,sight, buttplates, etc., GOD52G.O.D. Price......................100 parts for $45.00

Orig. New WWII M1 Garand Accessory Pouch.Reg. $3.95. GOD56 G.O.D...........10 for $19.95,.......................50 for $50.00, 100 for $75.00

New G.I. 1903 Springfield parts – $100 valueGOD58 ...................$25.00 No pins or springs.

Stevens pattern single barrel shotgun extractorsand hammers. New from factory fitting and finish-ing required. Regular $12.50 set GOD70 G.O.D. Price 5 sets for $12.50, 10 sets for $19.95, 25 sets for $37.50, 50 sets for $50.00

At these prices you won’t believe we will give further discounts, but as a thanks for all your past business and for guys who want to “lay it in” like we did years ago, we will offer these further unbelievable discounts:VOLUME DISCOUNT (THIS AD ONLY)$500.00 = 10%$1000.00 = 15% $2000.00 = 20%DISCOUNT IS FOR G.O.D. MERCHANDISE ONLY!!

M16 30 rd. magazine composite belt pouch. Reg$1.95 to $2.95 GOD79 G.O.D...100 for $65.00

$200 worth of Misc #1 MK III & #4 Enfield RifleParts assorted. GOD80 G.O.D. price ...$45.00

M14 Take Down Tool & Cleaning Rod Handle. Orig. G.I. new or like new cond. Regular $8.95. GOD83 G.O.D. 10 for $50.00, 25 for $100.00, 50 for $150.00, 100 for $200.00

Assortment of 10 firing pins for shotguns, pistols, Springfield, Enfield, etc - all different, most are new - value $60.00 to $80.00 GOD85 G.O.D. price...all for 10 for $34.50, 2 lots for $64.50, 5 lots for $125.00, 10 lots for $200.00

Close Out – Luger repro extractors. A little undersize in width but work fine. Need minor clean up of casting. Dirt cheap at cost...$10.00ea., 10 for $70.00, 25 for $150.00, 50 for $275.00 GOD99

Brand new original ‘98 Mauser bayonet grips sets-recently found in an arms room in Yugoslavia. Should be $10.00 a pair. GOD92 G.O.D. price...10 for $29.95, 50 pair for $99.95, 100 pair for $149.95, 500 pair for $625.00, 1000 pair for $1,000

Original G.I. BAR auto rifle magazine dust covers. Brand new in the box. 50 per box. Reg $2.00 each. GOD93 G.O.D. price...100 for $60.00, 500 for $200.00, 1000 for $300.00

Small Military cartridge pouch for belt mounting.Has internal loops for individual cartridges &space also for extra goodies. Regularly $3.95.GOD51 G.O.D. ......................100 for $125.00,500 for $500.00, 1000 for $650.00

Original U.S. G.I. prisoner of war medals. Reg up to $15.00 each. GOD87 G.O.D. price...10 for $30.00, 25 for $62.50, 50 for $100.00, 100 for $150.00–In original G.I. box & with ribbon.

Lot of 50 original Argentine military pistol holsters for Colt automatic (1927) & Brown-ing Hi Power – poor condition GOD102… $100.00

MG34 Tool Roll, exc condition. Reg. $14.95 GOD103… 10 for $75.00, 20 for $100.00

Original Russian Weapons Machine Gun Oil Cans – we got too many of ‘em! Reg. $5.00 each… GOD104 100 for $100.00

Colt 1911 Muzzle Compensators – attach to front of .40 slide. We called ‘em “ducks” in our ad. See an old ad description GOD110… 10 for $30.00, 50 for $100.00, 100 for $150.00

500 take off 1911 Colt .45 grip screws – these came off when Uncle demilled 80,000 wonder-ful 1911’s. As they run GOD111… 500 for $50.00, 1000 for $85.00

M1 Garand barrel lot – not so hot take offs – you’ll even probably find a WWII barrel in there GOD113… 10 for $120.00, 20 for $200.00

S&W Victory Model .38 WWII Revolver bbls. Exc. cond. Some thoughtful soul decided these would look better if they had some weld and a hole in ‘em. We thought so too, so we bought ‘em 20 years ago. Just found ‘em in the warehouse 20 years later. GOD41...10/$19.95, 25/$37.50 50/$69.50, 100/$100.00, 300/$350.00

.30 1919a4 BMG parts special, all new G.I. parts.GOD64 ..................$400.00 worth for $100.00

No pins or springs.

Cutest little European sling swivel –1/2" wide. Retail $.95 GOD91 G.O.D. price...10 for $15.00, 25 for $25.00, 50 for $37.50, 100 for $50.00

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.438.2548

www.e-sarcoinc.com10 misc. factory new commercial, all name brand Rifle & Shotgun Stocks & Forends! Value of $40-$100 each. All 10 for...................................................$99.00 GOD100

95% finished 1911 .45 long tang grip safeties. Just need minimum fitting. We’d finish them here, but we have 5,000 pcs in stock. 100 pcs for .............. ..............................................$299.00 GOD101

IDF Khaki H Harness - as used by troops throughout the 1970s and 80s. Works with U.S., Canadian, Israeli etc., pistol or cartridge belts that have grommet holes. An improvement over the old U.S. H -harness, this one also has a connection spot behind the neck for musette or other gear bags. 5 for $20.00, Or 10 for $35.00 GOD102

Israeli Uzi SMG magazine pouches – khaki canvas pouch holds 4-25rd. UZI mags or similar style magazines. 100 pcs for $200.00, Or 200 pcs for $300.00 GOD104

Israeli Grenade Pouch – conveniently holds 2 standard beer cans, grenades or stun grenades. Adjustable flaps. 100 pcs for $100.00, Or 500 pcs for $375.00 GOD105

Misc lot of original Pistol & Revolver Grips. 10 pairs, all different and all usable! 10 pair for $49.95 GOD106

Original surplus Military Trousers- Brand new. Retail is $4.95 although we can pass a great deal to you at 100 pair for $50.00, Or 500 pair for $200.00 GOD107

12 Gage Shotgun Cleaning Kit – metal cleaning cartridges filled w/CO2 and a fabric mop swab is shot down the bore to expedite cleaning. Really efficient and fun! Contains 2 cartridges and two mops per pack. One case contains 50 packs of 2 cartridges and mops each. Great Deal for you at 2 cases for $100.00, 5 cases for $225.00, 10 cases for $375.00, or 20 cases for $500.00 GOD109

Pot Luck lot of Pistol & Rifle & MG Magazines – all functional. We don’t have time to I.D. and sort them. 10 for $99.00 GOD112

Ruger Revolver original grip screws. Found 2 big boxes – don’t even know where they came from. Always a hot item! 100 screws for $65.00 GOD110

Original Ruger Revolver Grips – bought years ago when the Govt. destroyed Ruger pistols. 10 pair for $29.95 GOD139

Assortment of Leather Pistol Belts - mix of large, medium, and small leather belts without buckles. Width is 1-3/4” to 2”. Colors in the black and brown range. 10 pcs for $30.00, 25 pcs for $50.00, 50 pcs for $75.00, 100 pcs for $125.00 GOD113

Browning Auto 5 Shotgun Buttstocks- Would you believe, Originals! We bought thousands out of FN in Belgium two decades ago. Fully inletted and need final sanding & finish. A $75. value each! Buy 5 for only $100.00 GOD114

M1 Garand Blank Firing Adapter – new production to GI specs. Retail is $9.95. Bulk prices: 100 pcs for $300.00, 500 pcs for $1,000.00, 1,000 pcs for $1,500.00 GOD115

95% finished 1911 Colt auto parts – no time to finish ‘em. Have a couple hundred or more of each.1911 .45 sear - 100 for $100.00 GOD1171911 extractor - 100 for $150.00 GOD118If you order multiple lots we will fill the order til parts are gone.

East German rain pattern 3 magazine AK47 pouches – probably new pouches but have some dirt/oil discoloration from storage. 50 for $75.00 GOD119

40 years ago we bought a truck load of brand new Colt parts from Colt. It’s been sleeping. Now is the hour – buy at your level. All brand new factory Colt parts. Our selection. GOD120 $200 worth for $75.00, $500 worth for $175.00, $1000 worth for $250.00 That’s 75% off!

Original Galil bipods Israeli surplus – Retail $35.00. 10 for $150.00, 50 for $500.00, 100 for $750.00 GOD112

THIS IS COOL! Really neat 1911 Colt single action hammer – 95% fin-ished. Just need their other 5% ham-mer and strut pin holes are drilled. 100 pcs for $150.00 Have many lots if interested. GOD121

Original new factory Smith & Wesson M&P parts. $200.00 assortment for only $69.95 GOD122

Winchester Model 1892 cartridge stop spring – most breakable part in the ’92. New – retail $9.95. 10 for $25.00, 50 for $75.00, 100 for $100.00 GOD122

Commercial new rifle grip caps & spacers. 100 for $50.00 (50 of each) GOD31

Original Civil War musket triggers (remember Bannermans) 10 for $20.00, 50 for $75.00, 100 for $100.00 GOD47

GOOD OLE’ DAYS SALE ALL OVER AGAIN & AGAIN & AGAIN!!TURN BACK THE HANDS OF TIME 40 YEARS TO THE “GOOD OLE’ DAYS” WHEN SURPLUS GUN GOODIES WERE CHEAP & PLENTIFUL. WE’VE LOADED OUR WAREHOUSE WITH MATERIAL & THERE ARE STILL GOBS OF IT IN STOCK. HERE WE OFFER YOU “GOOD OLE’ DAYS” VALUES THAT SPEAK FOR THEMSELVES. NO LIMIT ON QUANTITIES. WE’LL SELL ENOUGH VOLUME IN EACH ORDER TO COVER THE COST OF IN-PLANT PROCESSING. THIS MERCHANDISE IS SO G.O.D. DARN CHEAP, NO ONE CAN BELIEVE THE PRICES! THAT’S GOOD OLD DAYS (G.O.D.) SALE! JUST LOOK AT THE GOOD OLE’ DAYS PRICES AND YOU’LL BE AMAZED. LARGER ORDERS SHIPPED VIA TRUCK – WE GET YOU A 55% DISCOUNT ON TRUCK RATES IN MOST AREAS – PLEASE INCLUDE AMPLE SHIPPING ON ALL ORDERS AS THESE PRICES ARE SO CHEAP WE CAN’T AFFORD TO SUBSIDIZE THE SHIPPING COSTS TOO! BECAUSE OF LOW PRICES AND HIGH HANDLING COSTS ALL GOODS IN THE SALE ARE SOLD AS IS AND ARE NOT RETURNABLE. MANY NEW ITEMS NOW!!!

Original G.I. M1 Carbine Magazine Dust Cov-ers, regularly .50 cents each, but available here as one box of 100 pcs for $20.00, Or 10 boxes (1,000 pcs) for $100.00 GOD103

Full size Articulated Armor sets – last 3 pieces from a container load - 18 gage steel real quality we sold $1000.00 to $1500.00. Others sell $2500.00 to $3500.00. Clear ‘em out (then I’ll prob-ably buy another container & sell @ $1000.00 to $1500.00). Last 3 pieces – steal ‘em at $495.00! GOD142

Original FAL Grenade Launcher Sold for as high as $45.00 - GOD price…. 10 for $99.95, 20 for $150.00 GOD141

From the old Remington auction - .22 Steel Rifle Trigger guards in the white. 2 screw holes front & rear. Cheap as you can get… 10 for $10.00, 5 for $35.00, 100 for $50.00 GOD140

90% Finished Remington Rifle firing pin blanks. 5 1/2” long - 10 for $8.95, 25 for $17.50, 50 for $29.95, 100 for $49.95 GOD71

L1A1 FAL full auto safety sear – brand new original G.I. parts- $8.95 ea, 5 for $7.49 ea, 10 for $5.95 ea, 50 for $4.95ea, 100 for $3.95 ea. GOD63

Overstock from an old old reprint done by Val Forgett – Original FG42 Operators Manual. List price was $9.95 - 10 for $4.95, 25 for $3.95, 50 for $3.45, 100 for $2.85 GOD84

Talk about the Good Ol’ Days, we bought out what was left at Interarms 10 or 15 years ago. Just dug out a pile of original Intearms embroidered patches. A piece of history soon to be lost – 3 for $7.95, 10 for $19.95, 50 for $75.00 100 for $99.95 GOD143