Embed Size (px)
DESCRIPTION
Network digital-signage-user-manual-2
Citation preview
Page 11 of 62
4.Flow for revising issuing properties of issued unit
Open task management page
Select DMB box tree at left side
Click “refresh” or “inquiry” button
Select one line data in unit list
Click “revise issuing settings” button
Select DMB box group, play mode and time etc. DMB box group defaults the DMB box group selected
on unit management
page
Click “issue and audit” to complete unit issue and audit
Click “OK” to complete unit issue
Complete unit audit based on operation stated in Flow 5
Other Important Operations for Task Unit
5. Flow for previewing, deleting, auditing and rejecting issued task unit
Open task unit
management page
Click any terminalDMB box group of terminalDMB box tree at left
side
Select one data line in
task unitlist
Click “Refresh” or “Inquiry” button
Click “task preview” button
Click “delete task unitunit issuing setting” button
Click “audit” button. Audit status should be pending audit
Click “reject” button Audit status should be pending audit
Popup basic information of this task unit
Popup deleting information screen and click “Yes”
after confirming without mistake to delete relevant
properties of issuing settings of the task unit
Popup deleting information screen for filling comments, click “Audit” to pass the task unit
Popup rejecting information screen for filling comments, click “Reject” to reject the
task unit
Revision operation for issued unit
www.szdpe.com
www.szdpe.com
Page 12 of 62
3. Browser security configuration In order to use this system more conveniently, users are suggested to set browser as follows:
1. Input DMB2.0 server IP into trusted sites (see Fig.)
2. Revise security settings of trusted sites (see Fig.)
www.szdpe.com
www.szdpe.com
Page 13 of 62
4. System operation
4.1. Log in the system After completing installation of Server 2.0, user can open a browser and input http://<server
ip>:8080/dmb in address bar to open login page as shown in Fig. 1-1
www.szdpe.com
www.szdpe.com
Page 14 of 62
Fig. 1-1
Input user name and password to login system. with Main menu page as shown in Fig. 1-2
Fig. 1-2
4.2. DMB box management Click DMB box management as shown in Fig. 1-2 to enter DMB box management page shown
in Fig. 2-1
www.szdpe.com
www.szdpe.com
Page 15 of 62
Fig. 2-1
4.2.1. DMB box group operation
In Fig. 2-1, users can set up their own DMB box group for unified management of their DMB
box. User can click as shown in DMB box group frame at left side and input relevant
information to set packet properties on pop-up window shown in Figure 2-2 (* means required
information), fill data based on system prompt:
Note: Separate different types of DMB boxes in different groups for convenient
management.
www.szdpe.com
www.szdpe.com
Page 17 of 62
Fig. 2-2
User can click to delete empty DMB box group
Click to refresh DMB box group record
Click to popup the menu shown in Fig. 2-3 as follows:
Fig. 2-3
Click to rename DMB box group
Click to edit DMB box properties (such as DMB box name,
volume, weather zone, working time, download time, pre-download setting)
Click to set working time and download time
www.szdpe.com
www.szdpe.com
Page 18 of 62
Click to set the volume of DMB box group
Click to control such orders as start, shutdown, restart of all
DMB boxes in group (DMB box will response to these orders, but the final working status
of DMB box is subject to working time set by user)
Click to change membership relation of DMB box group
Click to upgrade all DMB box versions, please refer to Item 13
in this Section for operation information.
Click to set pre-download file and time of this group
Click to export all DMB box unit of this group. The unit can be
used to upgrade DMB box play list of USB flash disk, refer to Item 12 in this Section
4.2.2. DMB box operation
As shown in Fig. 2-1 DMB box list, user can select DMB box name, number, DMB box IP and
DMB box status in search box and input relevant information in
input box. Click to inquiry relevant DMB box record
Click to add a new DMB box below group, user can fill necessary
configurations for new DMB box based on Fig. 2-4 (* means compulsory information);
www.szdpe.com
www.szdpe.com
Page 19 of 62
Fig.2-4
Click to popup dialog box as shown in Fig. 2-5. User can add bulk DMB
box numbers based on configuration
Fig. 2-5
Click to popup dialog box as shown in Fig. 2-6 for monitoring
download log, play log, content monitoring, download progress, error log, etc. during
different periods.
www.szdpe.com
www.szdpe.com
