Upload
vgaruda
View
218
Download
0
Embed Size (px)
Citation preview
8/18/2019 Neplan_Demo
1/2
1 of 2
Installation of NEPLAN V5.x Demo
1 Installation of NEPLAN 5.x
- Unzip the file NeplanSetup5xxNoManual.zip. (e.g. NeplanSetup541NoManual.zip)
- Run NeplanSetupV5xx.exe.
Attention:On a Windows Vista, XP, 2000 or NT computer you need administrator rights to install NEPLAN.
- Start NEPLAN and choose “start NEPLAN in DEMO mode…”
- With the following dialog you will be requested to enter the “Demo-License Code”. The Code you will get
from the NEPLAN demo web site: http://www.neplan.ch after submitting the “Machine Code”. This easilyworks via Copy/Paste. You should be logged in as administrator!
8/18/2019 Neplan_Demo
2/2
2 of 2
2 !! Important note for Matlab/Simulink Users !!!! Important note for Matlab/Simulink Users!!
If you have Matlab installed and you intend to use Matlab for developing dynamic NEPLAN models or if you arerunning NEPLAN and Simulink together in a dynamic simulation, you should delete the following Matlabredistributables dll's:
- icudt24l.dll
- icuin24.dll
- icuio24.dll
- icuuc24.dll- libeng.dll
- libmx.dll
- libut.dll
- zlib1.dll
These files are only needed for customers without Matlab.
.... and, there you go!
The BCP BCP BCP BCP team wishes you successful and enjoyable working with NEPLAN.