names and the largest stocks - Pioneer Weston€¦ · compact cylinders offer outstanding performance. With mounting accessories for practically any installation requirements, they

VISIT US AT www.eriks.co.ukto find your local Service Centre

PNEUMATICSBe

Call Tech Direct!

2p

£

Filter Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . 94-95

Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96-97

Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Process Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 100-101

Solenoid Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Pressure Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Push In Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 104-105

Tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106-107

The biggest names and the largest stocks

PN

EU

MA

TICS

93

See page 95,100 See page 96-97 See page 94, 98, 100 See page 104-107 See page 99, 102

L1, L2 Series Valves

When production has stopped, every second counts

Featuring a double combination groove for most ‘T’ and ‘Semicircular’ switches, this new pneumatic cylinder can be used with mostcurrent magnetic sensors, making it a suitable replacement for any VDMA conforming profile cylinder with the same bore and stroke. With a hard chrome-plated piston rod (stainless steel available), it has a flush mounting magnetic switch in the cylinder and end-of-strokepneumatic adjustable cushioning. ERIKS offers a comprehensive range of these superb products, with cylinder bores from 32mm–100mm (diameter) and all stroke lengths. The products below are just a small selection!

4-hour cylinder build service available!

Utilise your existing magnetic

sensors whenreplacing with theVDMA Geometric

Cylinder!

EMAIL: [email protected] to include your account code, part number and delivery address.

AccessCollection or delivered

2p

95PNEUMATICS

LOCAL SERVICE 0845 006 6000DIRECT SERVICE 08000 55 66 55

Filter Regulators94

Olympian Boxed SetsIncluding filter/regulator and microfog lubricator completewith exhausting shut-off valve, pressure gauge and mountingbrackets, these boxed sets offer outstanding value.

Norgren has a worldwide reputation for quality and innovation.Offering excellent flow and regulation characteristics, thecompany’s filter/regulator units are extremely compact andefficient, and suitable for a wide range of applications.

Olympian Boxed Sets

Part no Port Size Drain TypeBL64-401 1/2" bsp Auto

BL64-421 1/2" bsp Manual

BL68-801 1" bsp Auto

BL68-821 1" bsp Manual

Filter Regulators

Part no Port Size Drain TypeB64G-2GK-AD3-RMN 1/4" bsp Auto

B64G-2GK-MD3-RMN 1/4" bsp Manual

B64G-4GK-MD3-RMN 1/2" bsp Manual

B68G-8GK-AR3-RLN 1" bsp Auto

B68G-8GK-MR3-RLN 1" bsp Manual

FRL Combinations

Part no Port Size Drain TypeBL64-208 1/4" bsp Auto


BL64-408 1/2" bsp Auto


BL68-808 1" bsp Auto

BL68-828 1" bsp Manual

P64S + P74S SSDVSoft-start valves allow a controlled increase of pressure onto downstreamcylinders/machines offering protection to personnel equipment. The positivelydriven micro-switch ensures a monitored dump function.

■ Olympian Plus plug-in design or Excelon inline/modular installation■ Controlled increase of downstream pressure on start-up■ Monitored dump function■ High forward flow capacity■ High flow dump facility

Check your Air Preparationunits regularly

BS 6005 – 1997 standard forthe Safety of PolycarbonateBowls states:

■ Bowls which show signs ofdamage, cracking or hazing

■ Bowls which have beencontaminated with paint

■ Bowls which have been inservice for 10 years, shouldBe Replaced!

T E C H T I P S

Technical DataFluid: Compressed airMaximum Pressure: 16 bar (240 psig)Minimum Operating Pressure: 3 bar (45 psig)Operating Temperature: –20°C to 50°C (Solenoid rating max is 50°C whilst unit max is 80°C. Consult our technical service below +2°C)Gauge Ports: Rc1/8Exhaust Ports: ISO G1/2 with ISO G and Rc main ports, 1/2" PTF with PTF main portsTypical flow with 6.3 bar (90psig) inlet pressure andoutlet pressure drop of 0.5 var (7" psig)57dm3/s (120 scfm) (P1 to P2 = Cv 4.2) (P2 to P3 Cv = 5.6)Snap Pressure: Full flow when downstream pressure reaches 35% – 60% of inlet pressureCharge Time: For 2 litre downstream volume and inlet pressure of 6,3 bar (90 psig), 0,2s minimum, 75 secs. maximumSolenoid Operator: 22mm, 24V DC, 2W only (no manual overide)

Technical Data

5-ported, 2- or 3-position valves, solenoid pilot actuatedPort size: L11 = 1/8 L22 = 1/4

Flow capacity: L11 = 1000 Nl/min = CV 1.0 L22 = 1700 Nl/min = CV 1.7

Operating pressure: Vacuum to 10 bar, optional to 15 bar; with external pilot supply = vacuum to 21 bar

Pilot pressure range: 1 to 10 bar (up to 15 bar upon request)

Voltage: 24 VDC ± 10% 24V, - 110V, - 230V, 50-60 Hz ± 10%

Power input: 3.35 W; optional 5.5 W (DC only) 10/7 VA

Response Times [ms]Single actuated (5-port., 2-pos.) energise 10 de-energise 35 energise 7 de-energise 35

Dual actuated (5-port., 2-pos.) energise 10 — energise 7 —

Dual actuated (5-port., 3-pos.) energise 10 de-energise 35 energise 7 de-energise 35

MaterialBody: Aluminium alloy

Other Parts: Stainless steel, steel, aluminium

Static Seals: NBR

Finish: Anodised and varnished

Part no Bore (mm) Stroke (mm)GG032/0025/0000 032 0025

GG032/0050/0000 032 0050

GG032/0080/0000 032 0080

GG032/0100/0000 032 0100

GG032/0160/0000 032 0160

GG040/0025/0000 040 0025

GG040/0050/0000 040 0050

GG040/0080/0000 040 0080

GG040/0100/0000 040 0100

GG040/0160/0000 040 0160

GG050/0025/0000 050 0025

GG050/0050/0000 050 0050

GG050/0080/0000 050 0080

GG050/0100/0000 050 0100

GG050/0160/0000 050 0160

Part no Bore (mm) Stroke (mm)GG063/0025/0000 063 0025

GG063/0050/0000 063 0050

GG063/0080/0000 063 0080

GG063/0100/0000 063 0100

GG063/0160/0000 063 0160

GG080/0025/0000 080 0025

GG080/0050/0000 080 0050

GG080/0080/0000 080 0080

GG080/0100/0000 080 0100

GG080/0160/0000 080 0160

GG100/0025/0000 100 0025

GG100/0050/0000 100 0050

GG100/0080/0000 100 0080

GG100/0100/0000 100 0100

GG100/0160/0000 100 0160

■ 250 million cycles■ No seal wear■ 5/2 single and double solenoid

and all 5/3 variants


ChoiceOver 50,000 stock lines

2p

97PNEUMATICS


Standard Industry Pneumatics – Actuators96

DNCB Double Acting ActuatorsIdeal for all applications where technically and functionally advanced drives are used,these actuators feature a new piston system which delivers extremely smooth runningand significantly increased energy absorption. Compatible with accessories and mounting attachments from the DNC modular system, they are available with diameters from 32mm–100mm.

■ ISO/VDMA■ New piston system ■ Smooth and energy-efficient ■ New precision adjustment with scale

for end-position cushioning

Part no Type Stroke (mm)532724 DNCB-32-25-PPV-A 25

532725 DNCB-32-40-PPV-A 40

532726 DNCB-32-50-PPV-A 50

532727 DNCB-32-80-PPV-A 80

532728 DNCB-32-100-PPV-A 100

532729 DNCB-32-125-PPV-A 125

532730 DNCB-32-160-PPV-A 160

532731 DNCB-32-200-PPV-A 200

532732 DNCB-32-250-PPV-A 250

532733 DNCB-32-320-PPV-A 320

532734 DNCB-32-400-PPV-A 400

532735 DNCB-32-500-PPV-A 500

DNCB APPV– – – –

Double ActingStandard Cylinder A – MagneticPPV

Pneumatic Cushion, Adjustable both ends

Bore Size32, 40, 50, 63,

80, 100

Stroke (mm)25, 40, 50, 80, 100, 125, 160,

200, 250, 320, 400, 500Max Stroke 2000

ADN ActuatorsPowerful, reliable and economical, these second-generationcompact cylinders offer outstanding performance. Withmounting accessories for practically any installationrequirements, they feature a cylinder sensor on three sidesand are available in a wide variety of variants and sizes.■ 12mm–125mm dia, 500mm stroke■ Cylinder sensor on three sides ■ Mounting accessories for every requirement

ADN PPPV– – – –

Double ActingStandard Cylinder

P – Elastomer Cushion

A– Male Piston Rod ThreadI – Female Piston Rod Thread

A–

A – MagneticBore Size

12, 16, 20, 25, 32,40, 50, 63, 80, 100

Stroke (mm)5, 10, 15, 20, 25, 30, 40,

50, 60, 80Max Stroke 500

(Dependent on Bore Size)

Reed Switches. Reed Switch. 24V dc

Part no DescriptionSME-8-K-7.5-LED-24 LED prewired 7.5m lead

SME-8-S-LED-24 LED, 8mm in-line plug

LOWER COST

SELECTEDFOR VALUE

Bore Size ø 32mm

Part no Type Stroke (mm)536242 ADN-20-5-I-P-A 5

536243 ADN-20-10-I-P-A 10

536244 ADN-20-15-I-P-A 15

536245 ADN-20-20-I-P-A 20

536246 ADN-20-25-I-P-A 25

536247 ADN-20-30-I-P-A 30

536248 ADN-20-40-I-P-A 40

536249 ADN-20-50-I-P-A 50

536362 ADN-20-60-I-P-A 60

Bore Size ø 20mm


536260 ADN-25-10-I-P-A 10

536261 ADN-25-15-I-P-A 15

536262 ADN-25-20-I-P-A 20

536263 ADN-25-25-I-P-A 25

536264 ADN-25-30-I-P-A 30

536265 ADN-25-40-I-P-A 40

536266 ADN-25-50-I-P-A 50

536383 ADN-25-60-I-P-A 60

Bore Size ø 25mm


536300 ADN-40-10-I-P-A 10

536301 ADN-40-15-I-P-A 15

536302 ADN-40-20-I-P-A 20

536303 ADN-40-25-I-P-A 25

536304 ADN-40-30-I-P-A 30

536305 ADN-40-40-I-P-A 40

536306 ADN-40-50-I-P-A 50

536307 ADN-40-60-I-P-A 60

536308 ADN-40-80-I-P-A 80

Bore Size ø 40mm


536321 ADN-50-10-I-P-A 10

536322 ADN-50-15-I-P-A 15

536323 ADN-50-20-I-P-A 20

536324 ADN-50-25-I-P-A 25

536325 ADN-50-30-I-P-A 30

536326 ADN-50-40-I-P-A 40

536327 ADN-50-50-I-P-A 50

536328 ADN-50-60-I-P-A 60

536329 ADN-50-80-I-P-A 80

Bore Size ø 50mm


536279 ADN-32-10-I-P-A 10

536280 ADN-32-15-I-P-A 15

536281 ADN-32-20-I-P-A 20

536282 ADN-32-25-I-P-A 25

536283 ADN-32-30-I-P-A 30

536284 ADN-32-40-I-P-A 40

536285 ADN-32-50-I-P-A 50

536286 ADN-32-60-I-P-A 60

536287 ADN-32-80-I-P-A 80

Bore Size ø 32mm


532738 DNCB-40-40-PPV-A 40

532739 DNCB-40-50-PPV-A 50

532740 DNCB-40-80-PPV-A 80

532741 DNCB-40-100-PPV-A 100

532742 DNCB-40-125-PPV-A 125

532743 DNCB-40-160-PPV-A 160

532744 DNCB-40-200-PPV-A 200

532745 DNCB-40-250-PPV-A 250

532746 DNCB-40-320-PPV-A 320

532747 DNCB-40-400-PPV-A 400

532748 DNCB-40-500-PPV-A 500

Bore Size ø 40mm


532751 DNCB-50-40-PPV-A 40

532752 DNCB-50-50-PPV-A 50

532753 DNCB-50-80-PPV-A 80

532754 DNCB-50-100-PPV-A 100

532755 DNCB-50-125-PPV-A 125

532756 DNCB-50-160-PPV-A 160

532757 DNCB-50-200-PPV-A 200

532758 DNCB-50-250-PPV-A 250

532759 DNCB-50-320-PPV-A 320

532760 DNCB-50-400-PPV-A 400

532761 DNCB-50-500-PPV-A 500

Bore Size ø 50mm


532764 DNCB-63-40-PPV-A 40

532765 DNCB-63-50-PPV-A 50

532766 DNCB-63-80-PPV-A 80

532767 DNCB-63-100-PPV-A 100

532768 DNCB-63-125-PPV-A 125

532769 DNCB-63-160-PPV-A 160

532770 DNCB-63-200-PPV-A 200

532771 DNCB-63-250-PPV-A 250

532772 DNCB-63-320-PPV-A 320

532773 DNCB-63-400-PPV-A 400

532774 DNCB-63-500-PPV-A 500

Bore Size ø 63mmPart no Type Stroke (mm)532884 DNCB-80-25-PPV-A 25

532885 DNCB-80-40-PPV-A 40

532886 DNCB-80-50-PPV-A 50

532887 DNCB-80-80-PPV-A 80

532888 DNCB-80-100-PPV-A 100

532889 DNCB-80-125-PPV-A 125

532890 DNCB-80-160-PPV-A 160

532891 DNCB-80-200-PPV-A 200

532892 DNCB-80-250-PPV-A 250

532893 DNCB-80-320-PPV-A 320

532894 DNCB-80-400-PPV-A 400

532895 DNCB-80-500-PPV-A 500

Bore Size ø 80mm


532898 DNCB-100-40-PPV-A 40

532899 DNCB-100-50-PPV-A 50

532900 DNCB-100-80-PPV-A 80

532901 DNCB-100-100-PPV-A 100

532902 DNCB-100-125-PPV-A 125

532903 DNCB-100-160-PPV-A 160

532904 DNCB-100-200-PPV-A 200

532905 DNCB-100-250-PPV-A 250

532906 DNCB-100-320-PPV-A 320

532907 DNCB-100-400-PPV-A 400

532908 DNCB-100-500-PPV-A 500

Bore Size ø 100mm


ValueMore flexibility, more value

2p99PNEUMATICS


Cylinders and Process Valves98

Process ValvesA complete selection of valves for a variety of fluids,these cover 80% of applications and are the mostwidely used process valves that make up our range.

Part no Flow (Cv) Max † P (MPa) PortVDW11-3G-1-M5-Q 1 0.04 0.9 M5

VDW11-4G-1-M5-Q 0.04 0.9 M5

VDW11-5G-1-M5-Q 0.04 0.9 M5

VDW21-3G-1-01F-Q 0.09 0.7 G1/8

VDW21-4G-1-01F-Q 0.09 0.7 G1/8

VDW21-5G-1-01F-Q 0.09 0.7 G1/8

Part no Flow (Cv) Max † P (MPa) PortVX2110-01F-3DR1 0.18 1.5 G1/8

VX2110-01F-JDR1 0.18 1.5 G1/8

VX2110-01F-5DZ1 0.18 1.5 G1/8

VX2330-02F-3DR1 0.61 0.9 G1/4

VX2330-02F-JDR1 0.61 0.9 G1/4

VX2330-02F-5DZ1 0.61 0.9 G1/4

Direct Operated2-Port Solenoid Valve

Series VX21/22/23SMC considers this our ‘Workhorse’ valve range. The 1/8" and 1/4" sizes are ideal for low-medium flow applications. Low wattage coils, typically 4.5W keep running costs down.

Part no Flow (Cv) Max † P (MPa) PortVX3114-01F-3DR1 0.08 0.7 G1/8

VX3114-01F-JDR1 0.08 0.7 G1/8

VX3114-01F-5D1 0.08 0.7 G1/8

VX3224-02F-3DR1 0.17 0.7 G1/4

VX3224-02F-JDR1 0.17 0.7 G1/4

VX3224-02F-5D1 0.17 0.7 G1/4

VX3334-03F-3DR1 0.27 0.6 G3/8

VX3334-03F-JDR1 0.27 0.6 G3/8

VX3334-03F-5D1 0.27 0.6 G3/8


Series VX31/32/33Using the same internal components,this is the 3-port version of our VX2range. The 3-port configuration meansthis valve is ideal for using as a diverterfor air or water. Again, low wattagecoils help keep running costs low.

Part no Flow (Cv) Max † P (MPa) PortVXZ2230-03F-3DR1 2.8 1 G3/8

VXZ2230-03F-JDR1 2.8 1 G3/8

VXZ2230-03F-5D1 2.8 0.7 G3/8

VXZ2240-04F-3DR1 6 1 G1/2

VXZ2240-04F-JDR1 6 1 G1/2

VXZ2240-04F-5D1 6 0.7 G1/2

VXZ2240A-04F-3DR1 5.3 0.7 G1/2

VXZ2240A-04F-JDR1 5.3 0.7 G1/2

VXZ2240A-04F-5D1 5.3 0.7 G1/2

Zero Differential Pressure TypePilot Operated 2-Port Solenoid Valve

Series VXZ22/23Reaching 1/2" thread size from stock, this valve caters for larger flow capacity applications. Available in all voltages, this valve is one of our most versatile. This range also features our low watt coils and has zero pressure differential.

Part no Flow (Cv) Max † P (MPa) PortVCB31-3T-4-03F-Q 0.54 0.8 G3/8

VCB31-36T-4-03F-Q 0.54 0.8 G3/8


Series VCB20/30/40Designed specifically to handleheated water up to 99°C, thisvalve is direct operated and iswidely used on heatedtemperature control circuits.

Part no Flow (Cv) Max † P (MPa) PortVCL21-3D-3-02F-Q 0.33 0.8 G1/4

VCL21-36D-3-02F-Q 0.33 0.8 G1/4

VCL21-5D-3-02F-Q 0.33 0.8 G1/4


Series VCL20/30/40The internal stem and armaturecomponents have been specificallydesigned to avoid lag in responsetime due to fluid adhesion (below 50st. viscosity).

Double Acting Roundline Cylinders

Rodless Cylinders

■ Three different basic versions provide flexibilityand wide range of application

■ Magnetic piston as standard provides a widerange of control options

■ Comprehensive range of standard stroke lengths

■ International series available world-wide

■ New lightweight design extrusion with universalmounting grooves

■ Proved and patented sealing system

■ Dust protection as standard (ø 25 to 63mm)

■ Interchangeability with series M/46000

RT/572 – – –

Cylinder ø (mm) Substitute8 0810 1012 1216 1620 2025 2532 3240 4050 5063 63

Cylinder variants SubstituteMagnetic piston MMagnetic piston, central rear port, flat end MCMagnetic piston, side port, flat end MFMagnetic piston, double ended piston rod JM

Stroke (mm)500 max.

M/146 – – – –

Guiding System SubstituteInternal 0External 1Roller 2

Cylinder ø (mm) Substitute16 1620 2025 2532 3240 4050 5063 6380 80

Varients (non-magnetic piston) SubstituteAlternative ports ICActive brake L1Passive brake L2With added caged ball linear motion guide PDouble carriages *1) IDM/146***/ID/****/**** Distance between carriage centres (mm)

Strokes (mm)On request

Varients (magnetic piston) SubstituteAlternative ports MCActive brake L3Passive brake L4With added caged ball linear motion guide PMWith linear position sensor F1Double carriages *1) MDM/146***/ID/****/**** Distance between carriage centres (mm)

*1) For M/146100 & M/146200 only

Compact Direct Operated 2/3-Port Solenoid Valve

Series VDWSMC’s smallest 2-port valve and simplest design gives a low cost yet versatile solution. Much smaller than the VX equivalent, it uses SMC low wattage coils to minimise running costs. Can be used for vacuum, air or water.


ResponseWe’re here to help, try us

2p

101PNEUMATICS


Control Valves100

Fluid Control Valves for all ApplicationsWith over 100 years of experience, ASCO NUMATICS is an industry-leader in fluid power and fluid control technology. Customers across the world, insectors ranging from packaging to petrochemical, rely on ASCO NUMATICS fluid control solutions for the quality, performance and value they need.

Catalogues and other literature available on requestSolenoid and Pressure OperatedValves for Fluid ControlFrom industrial vacuums to saturated steam.

Medical AnalyticalA full range of products for medical and analytical applications.

Apparatus for Potentially Explosive AtmospheresEverything you need to know abouthazardous atmospheres and the ATEX directive.

Proportional TechnologyValves with proportional control, including poppet valves, servo valves and solenoid valves.

Pulse Valves for Dust Collector SystemsFrom the single pulse valve to thecomplete tanks system, this catalogueoffers a full product range.

Pilot Valves for the Process IndustryAll the pilot valves used in the ProcessIndustry are in this special catalogue,including ATEX and SIL-certified products.

Air, Water, SteamA comprehensive range of robust valves for applications that require the transport of fluids such as air, water and steam.

Aggressive Liquids and GasesWhether your application involves superheated water, acids, bases or analytical reagents, we can provide a control valve that meets your needs precisely. With hermetic separationof control mechanism and fluid, they are available in multiple flow configurations.

Medical and AnalyticalIdeal for use in applications such as medical analysers, biotechnology andchromatography, these low power, direct acting valves provide sterile conditions throughhermetic separation between the fluid and valve parts to prevent contamination.

ATEXWe offer a full range of ATEX certified products, designed for use in potentially explosive gaseous and dust laden atmospheres.

V60–63 Series Inline ValvesWith optimised flow rates combined with low power consumption asstandard, this range reduces installation space and cost.

■ High flow rate (750–4200 l/min)■ Easily customised soft-seal cartridge system ■ Flexible mounting systems■ Double pilot valve with ported pilot exhaust

■ Double pilot valve for multi-pole manifolds and single valves■ Wide range for all voltages

VS ValvesWith a glandless spool and sleeve for millions of trouble-free cycles, a softspool for enhanced flow rates, and easy integration with Fieldbus systems,they can be installed in seconds.

■ Add up to four stations easily■ No need to disassemble the valve island

■ Field configurable and total reliability■ Correct connection guaranteed

VS 18 Manifold Valves

Part no DescriptionVS18G511DF313A VS18 5/2 SOL/SOL VALVE

VS18G527DF313A VS18 5/2 SOL/SPRING VALVE

VS18G611DF313A VS18 5/3 SOL/SOL VALVE APB

VS18G711DF313A VS18 5/3 SOL/SOL VALVE COE

VS18S511DF313A VS18 5/2 SOL/SOL VALVE

VS18S517DF313A VS18 5/2 SOL/SPRING VALVE



VS18S611DF313A VS18 5/3 SOL/SOL VALVE APB

VS18S711DF313A VS18 5/3 SOL/SOL VALVE COE

VS18SA11DF313A VS18 2X3/2 SOL/SPRING VALVE NC


VS18SB11DF313A VS18 2X3/2 SOL/SPRING VALVE NO


VS18SC11DF313A VS18 2X3/2 SOL VALVE NC/NO

VS1872002-6FF0 VS18 DOUBLE STATION BASE 6MM

VS1872002-8FF0 VS18 DOUBLE STATION BASE 8MM

VS1872002-AFF0 VS18 DOUBLE STATION BASE G1/8

VS1872003-1FF0 VS18 SINGLE STATION BASE PF1/4

VS1872003-6FF0 VS18 SINGLE STATION BASE PF6MM

VS1872003-8FF0 VS18 SINGLE STATION BASE PF8MM

VS1872003-AFF0 VS18 SINGLE STATION BASE G1/8

VS1872004-6FF0 VS18 ONE STATION EXP KIT 6MM

VS1872004-8FF0 VS18 ONE STATION EXP KIT 8MM

VS1872004-AFF0 VS18 ONE STATION EXP KIT G1/8

VS1872010-AF00 VS18 SINGLE SUB BASE G1/4

Override – Push and Lock

Part no DescriptionV60A313A-A213L 3/2 G1/8 SOl VALVE N/O, 24V dc

V60A313A-A218L 3/2 G1/8 SOl VALVE N/O, 110V ac

V60A513A-A213L 5/2 G1/8 SOl VALVE, 24V dc

V60A513A-A218L 5/2 G1/8 SOl VALVE, 110V ac

V60A523A-A213L 5/2 G1/8 SOl VALVE, 24V dc

V61B313A-A213L 3/2 G1/4 SOl VALVE, N/O, 24V dc

V61B413A-A213L 3/2 G1/4 SOl VALVE, 24V dc

V61B413A-A218L 3/2 G1/4 SOl VALVE, 110V ac

V61B423A-A213L 3/2 G1/4 SOl VALVE, 24V dc

V61B513A-A213L 5/2 G1/4 SOL/SPRING VALVE, 24V dc

V61B513A-A218L 5/2 G1/4 SOL/SPRING VALVE, 110V ac

V61B523A-A213L 5/2 G1/4 SOL/SPRING VALVE, 24V dc

V61B611A-A213L 5/3 G1/4 SOL/SOL VALVE APB, 24V dc

V61B611A-A218L 5/3 G1/4 SOL/SOL VALVE APB, 110V ac

V62C413A-A213L 3/2 G3/8 SOL/SPRING VALVE, 24V dc

V62C413A-A214L 3/2 G3/8 SOL/SPRING VALVE, 110V ac


V62C511A-A213L 5/2 G3/8 SOL/SOL VALVE, 24V dc




Override – Push only

Part no DescriptionV60A417A-A313L 3/2 G1/8 SOL VALVE N/C, 24Vdc

V60A417A-A318L 3/2 G1/8 SOL VALVE N/C, 110V ac

V60A511A-A313L 5/2 G1/8 SOL/SOL VALVE, 24V dc

V60A511A-A318L 5/2 G1/8 SOL/SOL VALVE, 110V ac

V60A522A-A313L 5/2 G1/8 SOL/SOL VALVE, 24V dc

V60A611A-A313L 5/3 G1/8 SOL/SOL VALVE APB, 24V dc

V61B411A-A318L 3/2 G1/4 SOl VALVE, 110V ac

V61B511A-A313L 5/2 G1/4 SOL/SOL VALVE, 24V dc

V61B511A-A318L 5/2 G1/4 SOL/SOL VALVE, 110V ac

V61B522A-A313L 5/2 G1/4 SOL/SOL VALVE, 24V dc

V61B611A-A313L 5/3 G1/4 SOL/SOL VALVE APB, 24V dc

V62C422A-A318L 3/2 G3/8 SOL/SOL VALVE, 110V ac

V62C511A-A313L 5/2 G3/8 SOL/SOL VALVE, 24V dc

V62C511A-A318L 5/2 G3/8 SOL/SOL VALVE, 110V ac


VS 26 Manifold Valves

Part no DescriptionVS26G511DF313A VS26 5/2 SOL/SOL VALVE

VS26G511DF318A VS26 5/2 SOL/SOL VALVE



VS26G611DF313A VS26 5/3 SOL/SOL VALVE APB

VS26G711DF313A VS26 5/3 SOL/SOL VALVE COE







VS26S611DF313A VS26 5/3 SOL/SOL VALVE APB




VS26SA11DF318A VS26 2 X 3/2 SOLENOID VALVE


VS26SC11DF313A VS26 2X3/2 SOL VALVE NC/NO

VS2672503-8GF0 VS26 SINGLE SUB BASE 8MM

VS2672503-BGF0 VS26 SINGLE STATION G1/4

VS2672503-YGF0 VS26 SINGLE SUB BASE 10MM

VS2672504-8GF0 VS26 SINGLE STATION EXP 8MM

VS2672504-BGF0 VS26 TWO STATION MODULE

VS2672504-YGF0 VS26 SINGLE STATION EXP 10MM

VS2672510-BG00 VS26 SINGLE SUB BASE G1/4


Solenoid Valves102

CP95 Cylinders

SMC solenoid valves offer unsurpassed quality, performance andrange, and are extensively in the semiconductor industry, as well as

the automotive, packaging, medical, specialty machine and machine toolsectors. The company has a valve solution that will accommodate your

most demanding application – if you don’t see what you need here, call us!

SY Solenoid ValvesOffering major advances in valve performance, these valves provide highflow with low power consumption in a compact design. Available in bodyported or base mounted styles, they can be used individually or manifoldmounted, and represent an extremely cost-effective solution. For completemanifold assemblies contact your local ERIKS Service Centre.

Solenoid Valves for Prewired ManifoldsSY3000

Part no DescriptionSY3140-5FU-Q 5/2-Single Sol

SY3245-5FU-Q 5/2-Double Sol

SY3345-5FU-Q 5/3-Centre Closed

SY3445-5FU-Q 5/3-Centre Exhaust

SY3545-5FU-Q 5/3-Centre Pressurised

Body Ported ValvesSY3000

Part no Description Port SizeSY3120-5LOU-C4-Q 5/2-Single Sol 4mm

SY3220-5LOU-C4-Q 5/2-Double Sol 4mm

SY3320-5LOU-C4-Q 5/3-Centre Closed 4mm

SY3420-5LOU-C4-Q 5/3-Centre Exhaust 4mm

SY3520-5LOU-C4-Q 5/3-Centre Pressurised 4mm

SY5000

Part no Description Port SizeSY5120-5LOU-01F-Q 5/2-Single Sol 1/8"

SY5120-5LOU-C8F-Q 5/2-Single Sol 8mm

SY5220-5LOU-01F-Q 5/2-Double Sol 1/8"

SY5220-5LOU-C8F-Q 5/2-Double Sol 8mm

SY5320-5LOU-01F-Q 5/3-Centre Closed 1/8"

SY5320-5LOU-C8F-Q 5/3-Centre Closed 8mm

SY5420-5LOU-01F-Q 5/3-Centre Exhaust 1/8"

SY5420-5LOU-C8F-Q 5/3-Centre Exhaust 8mm

SY5520-5LOU-01F-Q 5/3-Centre Pressurised 1/8"

SY7000

Part no Description Port SizeSY7120-5LOU-02F-Q 5/2-Single Sol 1/4"



SY7120-5LOU-C8-Q 5/2-Double Sol 10mm

SY7220-5LOU-02F-Q 5/2-Double Sol 1/4"


SY7320-5LOU-02F-Q 5/3-Centre Closed 1/4"


SY7420-5LOU-02F-Q 5/3-Centre Exhaust 1/4"



SY7520-5LOU-02F-Q 5/3-Centre Pressurised 1/4"

SY5000

Part no DescriptionSY5140-5FU-Q 5/2-Single Sol

SY5245-5FU-Q 5/2-Double Sol

SY5345-5FU-Q 5/3-Centre Closed

SY5445-5FU-Q 5/3-Centre Exhaust

SY5545-5FU-Q 5/3-Centre Pressurised

Sub Base Mounted ValvesSY3000

Part no DescriptionSY3140-5LOU-Q 5/2-Single Sol

SY3240-5LOU-Q 5/2-Double Sol

SY3340-5LOU-Q 5/3-Centre Closed

SY3440-5LOU-Q 5/3-Centre Exhaust

SY3540-5LOU-Q 5/3-Centre Pressurised

SY5000






SY7000






■ Conform to ISO and VDMA■ Hard chromed steel piston rods■ Recessed cushion valves ■ Enclosed tie-rods■ Six bore sizes ■ Variety of mounting options

CQ2 Compact Cylinders■ Front snap-ring design for

easy access■ Single and double rod models■ 10 bore sizes up to 100mm■ Versatile mounting options


AccessCollection or delivered

2p

105PNEUMATICS


Push In Fittings104

Push-in FittingsHigh quality Push-in Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittingsare suitable for both pneumatic and vacuum applications. The composite fittings incorporate a wide range of sizes: All the popularvariants, with an extended range of combinations of tube to thread size that reduce the requirement for adaptors, keeping costand installation time down. All the straight fittings have an internal hex, allowing fitting into ports with limited access.

The premier one-touch tube joint system

■ Simple and quick to install■ Flexible space-saving design■ Wide range to suit all applications■ Compatible with all other leading systems

Polymer Push-in Fittings Range

■ Tubing can be freely rotated, even after installation■ All taper threads are pre-coated with PTFE for

improved seal performance■ Packaged in bags of 5

Metal Adapters Range

Straight ParallelMale

■ All materials RoHS compliant■ Wide range of tube to thread size options■ 100% leak tested during production■ Life tested to > 3 million pressure switching cycles

@ 0.8 MPa at 2 c.p.s. (cycles per second)

■ Tube can be reinserted up to 5 times for aleak free seal

■ After 5 operations the tube must be cut back to offer a clean gripping area

Technical Details

Thread Tube sizeSize 4mm 6mm 8mm 10mm 12mm 16mmM5 W89A-10105 W89A-10106 – – – –

1/8 W89A-10116 W89A-10117 W89A-10118 – – –

1/4 W89A-10113 W89A-10114 W89A-10115 W89A-10111 W89A-10112 –

3/8 – W89A-10121 W89A-10122 W89A-10119 W89A-10120 W89A-10781

1/2 – W89A-10109 W89A-10110 W89A-10107 W89A-10108 W89A-10782

Elbow Parallel Male


1/8 W89A-10168 W89A-10169 W89A-10170 – – –

1/4 W89A-10165 W89A-10166 W89A-10167 W89A-10163 W89A-10164 –

3/8 – W89A-10173 W89A-10174 W89A-10171 W89A-10172 W89A-10787

1/2 – W89A-10161 W89A-10162 W89A-10159 W89A-10160 W89A-10788

Tee ParallelMale


1/8 W89A-10270 W89A-10271 W89A-10272 – – –

1/4 W89A-10267 W89A-10268 W89A-10269 W89A-10265 W89A-10266 –

3/8 – W89A-10275 W89A-10276 W89A-10273 W89A-10274 –

1/2 – W89A-10263 W89A-10264 W89A-10261 W89A-10262 –

Thread Thread size 2Size 1 1/8F 1/4F 3/8F 1/2F1/4M W89A-12446 – – –

3/8M W89A-12448 W89A-12450 – –

1/2M W89A-12452 W89A-12454 W89A-12456 –

3/4M – – W89A-12458 W89A-12460

1M – – – W89A-12462

Speed Control Elbow Parallel Thread Tube sizeSize 4mm 6mm 8mm 10mm 12mm 16mm1/8 W89A-10706 W89A-10707 W89A-10708 – – –

1/4 – W89A-10704 W89A-10705 W89A-10702 W89A-10703 –

3/8 – – W89A-10711 W89A-10709 W89A-10710 –

1/2 – – W89A-10701 W89A-10699 W89A-10700 –

Elbow Union Tube size4mm 6mm 8mm 10mm 12mm 16mmW89A-10336 W89A-10337 W89A-10338 W89A-10339 W89A-10340 W89A-10754

Tee Union Tube size4mm 6mm 8mm 10mm 12mm 16mmW89A-10341 W89A-10342 W89A-10343 W89A-10344 W89A-10345 –

Y Union Tube size4mm 6mm 8mm 10mm 12mm 16mmW89A-10359 W89A-10360 W89A-10361 W89A-10362 W89A-10363 W89A-10752

Speed Control Union Tube size4mm 6mm 8mm 10mm 12mm 16mmW89A-10359 W89A-10360 W89A-10361 W89A-10362 W89A-10363 W89A-10752

Nipple Taper Thread size1/8 1/4 3/8 1/2 3/4 1W89A-12326 W89A-12328 W89A-12330 W89A-12332 W89A-12334 W89A-12336

Elbow AdaptorMale/Male

Thread sizeM5 1/8 1/4 1/4-1/8 3/8 1/2 3/4 1W89A-12110 W89A-12112 W89A-12114 W89A-12116 W89A-12118 W89A-12120 W89A-12122 W89A-12124

Elbow AdaptorFemale/Female

Thread sizeM5 1/8 1/4 3/8 1/2 3/4 1W89A-12142 W89A-12144 W89A-12146 W89A-12148 W89A-12150 W89A-12152 W89A-12154

Sleeve Thread size1/8 1/4 3/8 1/2 3/4 1W89A-12486 W89A-12488 W89A-12490 W89A-12492 W89A-12494 W89A-12496

Cross AdaptorFemale/Female/Female/Female

Thread size1/8 1/4 3/8 1/2 3/4 1W89A-12258 W89A-12260 W89A-12262 W89A-12264 – –

Reducer TaperMale/Female

For the full range of push-in fittings,see the RX Catalogue.

Tubing

Part no Size (O/D I/D) ColourW89A-12880 4 x 2.5 Black

W89A-12882 4 x 2.5 Blue

W89A-12884 4 x 2.5 Green

W89A-12886 4 x 2.5 Natural

W89A-12888 4 x 2.5 Red

W89A-12890 4 x 2.5 Yellow

Part no Size (O/D I/D) ColourW89A-12904 6 x 4 Black

W89A-12906 6 x 4 Blue

W89A-12908 6 x4 Green

W89A-12910 6 x 4 Natural

W89A-12912 6 x 4 Red

W89A-12914 6 x 4 Yellow


W89A-12930 8 x 6 Blue

W89A-12934 8 x 6 Green


W89A-12940 8 x 6 Red

W89A-12942 8 x 6 Yellow

Part no Thread Diameter Rangesize bar

W89A-12712 1/8 40 -1 – 0

W89A-12714 1/8 40 0 – 2

W89A-12716 1/8 40 0 – 4

W89A-12718 1/8 40 0 – 6

W89A-12720 1/8 40 0 – 10

W89A-12724 1/8 40 0 – 20

W89A-12726 1/8 50 -1 – 0

W89A-12728 1/8 50 0 – 2

W89A-12730 1/8 50 0 – 4

W89A-12732 1/8 50 0 – 6

W89A-12734 1/8 50 0 – 10

W89A-12738 1/8 50 0 – 20

W89A-12742 1/4 63 0 – 2

W89A-12744 1/4 63 0 – 4

W89A-12746 1/4 63 0 – 6

W89A-12748 1/4 63 0 – 10

W89A-12752 1/4 63 0 – 20


W89A-12946 10 x 7 Blue

W89A-12948 10 x 7 Green


W89A-12952 10 x 7 Red

W89A-12954 10 x 7 Yellow


W89A-12958 10 x 8 Blue

W89A-12960 10 x 8 Green


W89A-12964 10 x 8 Yellow

W89A-12966 10 x 8 Red


W89A-12970 12 x 9 Blue

W89A-12972 12 x 9 Green


W89A-12976 12 x 9 Red

W89A-12978 12 x 9 Yellow

Part no Size (O/D I/D) ColourW89A-12980 16 x 12 Natural

W89A-12982 16 x 12 Black

PA12 Nylon Tube(supplied in 30 metre coils)


W89A-12986 4 x 2.5 Blue

W89A-12988 4 x 2.5 Green

W89A-12990 4 x 2.5 Natural

W89A-12992 4 x 2.5 Red

W89A-12994 4 x 2.5 Yellow


W89A-12998 6 x 4 Blue

W89A-13000 6 x 4 Green


W89A-13004 6 x 4 Red

W89A-13006 6 x 4 Yellow


W89A-13010 8 x 5.5 Blue

W89A-13012 8 x 5.5 Green

W89A-13014 8 x 5.5 Natural

W89A-13016 8 x 5.5 Red

W89A-13018 8 x 5.5 Yellow


W89A-13022 10 x 6.5 Blue

W89A-13024 10 x 6.5 Green

W89A-13026 10 x 6.5 Natural

W89A-13028 10 x 6.5 Red

W89A-13030 10 x 6.5 Yellow

SH98 Polyurethane Tube(supplied in 30 metre coils)

TechnicalDetails

General PurposePressure gauges for use in non-corrosive environments,

typically used for pnuematic applications.

■ Ranges 40mm to 100mm

■ Dial -1 to 20 Bar

■ Dual Scale – Bar/p.s.i.

■ 40, 50 & 63mm snap on window

■ 100mm and all panel mount sizes chromed bezel

■ Accuracy 40, 50 & 63mm

■ ASME B40.1-1991 B GRADE (± 3% of span)

■ 100 ASME B40.1-1991 A GRADE (± 1% of span)

Materials:Case Black painted steel

Window Polycarbonate

Internal parts Brass, bourdon tube

Mounting threads BSPT (unless otherwise stated)

Specifications:Temperature rating: -25°C to +60°C

Process GaugesStainless steel gauges for fluid and gaseous media,

compatible to the wetted parts (SUS 316).

■ Ranges 100mm

■ Dial -1 to 10 Bar

■ Gauges supplied dry, but have a fillable case

■ Suitable glycerine available in single fill bottles

■ Dual Scale – Bar/p.s.i.

■ Protection ratings IP65

■ Accuracy EN 873-1 (1% of scale)

Materials:Case Stainless steel 304

Window Laminated safety glass

Internal parts Stainless steel 316, bourdon tube

Mounting threads 1/2" BSPP

Specifications:Pressure Limitation: Constant pressure 100%

Cyclic pressure 90%

Over pressure 130%

Temperature rating: -25°C to +60°C

For the full range of RX Fittings,Adaptors and Accessories, call 0845 006 6000 or visit usat www.eriks.co.uk and requestyour copy of the RX Catalogue


W89A-13034 12 x 8 Blue

W89A-13036 12 x 8 Green


W89A-13040 12 x 8 Red

W89A-13042 12 x 8 Yellow

Centre Back


W89A-12756 1/8 40 0 – 2

W89A-12758 1/8 40 0 – 4

W89A-12760 1/8 40 0 – 6

W89A-12762 1/8 40 0 – 10

W89A-12766 1/8 50 0 – 2

W89A-12768 1/8 50 0 – 4

W89A-12770 1/8 50 0 – 6

W89A-12772 1/8 50 0 – 10

Centre Back, Panel Mount


W89A-12810 1/2 BSPP 100 -1 – 0

W89A-12812 1/2 BSPP 100 0 – 2

W89A-12814 1/2 BSPP 100 0 – 6

W89A-12816 1/2 BSPP 100 0 – 10

Part no SizeW89A-12818 Single fill 100ml

All Stainless Steel Process Gauge

Glycerine Bottle


W89A-12774 1/8 50 -1 – 0

W89A-12776 1/8 50 0 – 2

W89A-12778 1/8 50 0 – 6

W89A-12780 1/8 50 0 – 10

W89A-12782 1/8 50 0 – 16

W89A-12784 1/8 50 0 – 20

W89A-12786 1/4 63 -1 – 0

W89A-12788 1/4 63 0 – 2

W89A-12790 1/4 63 0 – 6

W89A-12792 1/4 63 0 – 10

W89A-12794 1/4 63 0 – 16

W89A-12796 1/4 63 0 – 20

W89A-12798 3/8 BSPP 100 -1 – 0

W89A-12800 3/8 BSPP 100 0 – 2

W89A-12802 3/8 BSPP 100 0 – 6

W89A-12804 3/8 BSPP 100 0 – 10

W89A-12806 3/8 BSPP 100 0 – 16

W89A-12808 3/8 BSPP 100 0 – 20

Bottom Entry


ChoiceOver 50,000 stock lines

2p

107PNEUMATICS


Tubing106

Minimising leakage

The largest component of cost in a compressed air system is energy with heat and air leaks being the mostcommon ways that energy is lost. Using a range of tools, including ultrasonic detectors, flow metering and datalogging, leaks can be easily detected and quantified, even in noisy plant areas – saving you considerable cost. Aftercompleting the site survey ERIKS can help you plan and implement a programme of preventative and reactivemaintenance, designed to identify problem areas, so that leakage – and therefore energy loss – is minimised.

How do we know..?

UltrasoundCompressed air follows a straight, direct path fromthe high-pressure source to a low-pressure outlet.This may be anything from air tools to actuators.When the compressed air passes into theatmosphere it changes from a pressurised laminarflow into a low-pressure turbulent flow. Thisturbulence creates “white noise” which containsultrasound. Like all forms of sound, ultrasound willlose its energy over distance. We can use this topinpoint where the leak is, by locating the highestlevel of ultrasound.

DataloggingRecording usage of compressed air over productioncycles provides the level of information required tomaximize the efficiency of the compressors, andthe use of the compressed air energy provided.Armed with the right information it is possible tomake significant savings by ensuring thecompressors are running when they need to, and thehighest air consumption times are when you expectthem. How many companies are running a compressorjust to service their air leaks? Are you….?

Cutting the cost of compressed air

KNOW-HOW


Pneumatics EngineerÕs K now-how108

ThermographyERIKS have been carrying out thermographic surveyssince these cameras became ‘portable’ in the lateseventies. Traditionally, engineers have usedthermography as a tool to detect defects within controlgear and electrical distribution. The same technologycan also detect defects with compressed air systemsgenerating cold spots through leaks or heat from failingequipment and valves.

This is just a part of a broad range of services andadvice we can contribute to reducing your overallsystem costs. This is available as part of a full servicepackage which includes supplying replacement partsand installing optimised solutions.

We have identified over £1m of savings for clients in 2008 using our vast experience and know-how.

Know-How makes a difference

The technology is capable of findingdefects in real-time meaning animmediate condition can be given.

Savings for clients have been inexcess of £100,000 for a three-daysurvey. With energy prices rising,there is greater need and potential forthe savings we can offer.

Documents

names and the largest stocks - Pioneer Weston€¦ · compact cylinders offer outstanding performance. With mounting accessories for practically any installation requirements, they