-
LED DRIVER SCC 100W
KEY FEATURES
Model Output current Output voltage Output power
SCC100 - C350 350mA 180 - 300V 105.0W
SCC100 - C450 450mA 140 - 233V 104.8W
SCC100 - C700 700mA 90 - 150V 105.0W
SCC100 - C1050 1050mA 60 - 100V 105.0W
SCC100 - C1400 1400mA 45 - 75V 105.0W
SCC100 - C1750 1750mA 36 - 60V 105.0W
SCC100 - C2100 2100mA 30 - 50V 105.0W
SCC100 - C3150 3150mA 20 - 33V 103.9W
SCC100 - C4800 4800mA 12 - 20V 96.0W
MODELS
CHARACTERISTICS
Parameters Value Test conditions / Comment
Input operating voltage AC 100 - 240V -
Input programming voltage AC 160 - 240V -
Input frequency 50Hz -
Input current 0.51A Full load, V = AC 230Vin
Inrush current 65A Cold start, V = AC 230Vin
Power factor 0.96 Full load, V = AC 230Vin
Efficiency 90% Full voltage, full load
Dimming control Programmable, PLC SEAK S-50 PLC
ENERGETICS
Constant current output
C
Built-in module for smart dimming and PLC control
Active power factor correction
Short circuit, over voltage, over temperature protections
Designed to worldwide safety standards for lighting
ooling by free air convection
Encapsulated with IP67 level
5 years warranty
1
[email protected]
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
SEAK PLC
built-in
-
ENERGETICS
LED DRIVER SCC 100W
Parameters Value Test conditions / Comment
Dimming range 0 - 100% -
Output current accuracy 5% -
Open-circuit voltage
330V SCC100 - C350
258V SCC100 - C450
166V SCC100 - C700
110V SCC100 - C1050
83V SCC100 - C1400
66V SCC100 - C1750
56V SCC100 - C2100
57V SCC100 - C3150
Output Current overshoot 10% Turning power on
Turn-on delay time 2S Cold start, power on
Ripple 20% -
Storage -40 - +85C Humidity: 5% RH to 95% RH
Ambient operating temperature -40 - +70C Startup at rated
voltage
Maximum case temperature +80C Hot-spot on case
Operating relative humidity 10 - 95% Non considering
MTBF 400kHrsFull load, AC 220V input,
25C ambient temperature
Dimension (LxWxH) 188.5x78.5x37mm -
Weight 850g -
2
[email protected]
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
-
Parameters Value
Over voltage
115~150% rated output voltage. In latch mode, the power
supply
shall return to normal operation only
after the power is turned on again
Short circuitIn hiccup mode, it will recover automatically
fault condition is removed
Over temperature Typical 110C
Safety standards UL8750, UL935, UL1012, UL1310 CLASS 2,
EN61347-1, EN61347-2-13
EMC EN55015, FCC Part 15 Class B, EN61000-3-2, EN61000-3-3,
EN61000-
4-2, 3, 4, 6, 8, 11, EN61547
ENERGETICS
188.5
300+20
DC OUTPUT (2*AWG 18) RED (V+)
BLACK (V-)
50+5 15+2---
158.5
600+20-
AC OUTPUT (3*AWG 18)
RED (ACL)
WHITE (ACN)
GREEN (GND)
15+2- 50+5-
78
37
38
.5
55
4
4
174.5
170.5
8
11
MECHANICAL SPECIFICATION(dimensions in mm)
PROTECTION
LED DRIVER SCC 100W
13
[email protected]
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
-
ENERGETICS
LED DRIVER SCC 100W
14
[email protected]
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
LIFESPAN CHARACTERISTIC
10 000
20 000
30 000
40 000
50 000
60 000
70 000
80 000
90 000
100 000
10 20 30 40 50 60 70 80 90
Op
era
tin
g t
ime
(h
ou
rs)
Case Temperature (C)
0
04_DS100_01_05032015_PMOC
1: 100WStrnka 2Strnka 3Strnka 4
