NAME: Ultratest Pty LtdADDRESS: Unit 2, 76 Playne Street Frankston, Victoria, 3199TELEPHONE: Business Hours: Mobile: 0448 982 259Fax: (03) 9781 3394Email: info@ultratest.com.au

ESTABLISHED: 1984

DIRECTOR: Paul F. Kelly

GENERAL MANAGER: Grant Kelly

ADMINISTRATIVE MANAGER: Susan Kelly

TECHNICIANS: P. Kelly, G. Kelly,C. Brownlee, H. Ridley

QUALIFICATION: NATA registered for the following tests:

6.31 Ultrasonic Examination of Ferritic Steels.01 Flat Rolled Products.02 Welded Joints.03 Castings.04 Forgings.05 Butt welds in rail sections.06 Semi finished rolled products.07 Other Rolled Products

6.32 Ultrasonic Examination of Aluminium Alloys.02 Welded Joints.03 Castings

6.33 Ultrasonic Examination of Austenitic Stainless Steels.02 Welded Joints

6.34 Ultrasonic examination of clad steels.11 Welded joints in clad steels

6.39 Ultrasonic Examination of Other Non Specified Metals.01 Copper to Steel welds.02 Copper Welds

6.51 Ultrasonic Thickness Measurement

6.52 Ultrasonic Examination of Bonded Metals.01 Machine Bearings.99 Ultrasonic examination of tungsten carbide coatings

6.54 Ultrasonic Examination of Finished Components in Service.01 Screw Threaded Components.02 Gears and Splined Components

Page 2 of 4

COMPANY PROFILE

Ultratest Pty LtdUnit 2, 76 Playne Street Frankston, Victoria, 3199Business Hours: (03) 9781 47990448 982 259(03) 9781 3394info@ultratest.com.au

1984

Paul F. Kelly

Grant Kelly

Susan Kelly

P. Kelly, G. Kelly, D. Woodhouse, C. Brownlee, L. Scoble, J. JohnsonH. Ridley

NATA registered for the following tests:

6.31 Ultrasonic Examination of Ferritic Steels

.06 Semi finished rolled products

6.32 Ultrasonic Examination of Aluminium Alloys

6.33 Ultrasonic Examination of Austenitic Stainless Steels

examination of clad steels

6.39 Ultrasonic Examination of Other Non Specified Metals

6.51 Ultrasonic Thickness Measurement

6.52 Ultrasonic Examination of Bonded Metals

.99 Ultrasonic examination of tungsten carbide coatings

6.54 Ultrasonic Examination of Finished Components in Service.01 Screw Threaded Components.02 Gears and Splined Components

Unit 2, 76 Playne Street Frankston, Victoria, 3199

6.61 Magnetic Particle Testing

6.71 Liquid Penetrant Inspection

6.91 Welded joints Visual Inspection

13.90.15 Macroscopic examination of steels13.91.13 Macroscopic examination of wrought products

All tests are carried out by highly trained approved NATA Signatories and all reports are NATA endorsed.Technicians are qualified to AS 3998and or CWSIP (UK)

MEMBERSHIP: Welding Technology Institute of AustraliaInstitute of NonAustralian Institute of NonAustralian Industry Group

BUSINESS: Performance of Non

1. Ultrasonic Testing2. Magnetic Particle Testing3. Penetrant Testing4. Macro Tests5. Visual Tests

Welding Technology1. Welding Engineers2. Weld Procedure Development and Certification3. Welder Qualification Certification

GENERAL INSPECTION:

1. Visual and dimensional inspection of steel fabrication, castings and forgings.2. Inspection of surface treatment.3. Inspection of mechanical items. Machinery, gear boxes, pumps, compressors etc.4. Weld Procedure documentation and review.

NON-DESTRUCTIVEINSPECTION OF:Pipes and PlatesCastingsForgingsPressure VesselsMining EquipmentWelded StructuresRail WeldsAutomotive ComponentsBearing BondingIn Service InspectionCritical Defect Sizing

Page 3 of 4

6.71 Liquid Penetrant Inspection

Macroscopic examination of steels.13 Macroscopic examination of wrought products

All tests are carried out by highly trained approved NATA Signatories and all reports are

Technicians are qualified to AS 3998 / ISO 9712 level 3 and level 2 for all tests with AINDT

Welding Technology Institute of AustraliaInstitute of Non-Destructive Testing U.K.Australian Institute of Non-Destructive TestingAustralian Industry Group

Non-Destructive Examination:

2. Weld Procedure Development and Certificationon Certification

1. Visual and dimensional inspection of steel fabrication, castings and forgings.2. Inspection of surface treatment.3. Inspection of mechanical items. Machinery, gear boxes, pumps, compressors etc.

Procedure documentation and review.

All tests are carried out by highly trained approved NATA Signatories and all reports are

with AINDT

1. Visual and dimensional inspection of steel fabrication, castings and forgings.

3. Inspection of mechanical items. Machinery, gear boxes, pumps, compressors etc.

INSPECTION STANDARDS:

Australian ASUSA ASTMUSA ASMEUSA APIUSA AWSUSA AISCUSA ANSIUK BSUK WI recommendationsUK CEGBGERMAN DINJAPANESE JIS

PROJECT INVOLVEMENT:

The following are some of the projects we have been

Loy Yang B Power StationEssoEsso Malaysia BHPPEPTMajor City Buildings

Eliott EngineeringAberfoyle ResourcesAllco/Boving

Baulderstone HornibrookABB EPT/National RailJohn Holland

SIA John Holland

ADI Engineering

GVP Fabricators

QUALITY ASSURANCE:

We are a NATA accredited NDT testingto ISO /IEC 17025 2005 is required and audited. In the performance of non destructive tests and the production of test reports ISO/IEC 17025 2005 exceeds the requirements of AS 3901 and ISO 9001

Page 4 of 4

The following are some of the projects we have been involved with.

Steel structureVessels for offshore oil productionVessels for offshore oil productionVessels for onshore oil productionAluminium busbar Tomago Smelter333 Collins Street101 Collins Street120 Collins StreetBourke PlaceVic. CentralNew Commonwealth OfficesPenstock barrels for Bogong Power StationCritical sizing of weld defects in sag mill at Hellyer MineDartmouth Dam turbine casing and associated equipmentPipe work on site for BHP Methanol plant AltonaRail track welds Spotswood rail welding facility.Rail track welds Geelong to Serviceston via Maroona and Ararat.Melbourne to WaggaRail track welds Western Australia Warrnambool to South Geelong and Alice Springs to DarwinLarge pressure vessel reactors for Vost-Alpine/BHP project.105 Steel bridge pans for Eastlink Freeway MelbourneFrames, Crusiforms & Plates for Melbourne Rectangular Stadium.

We are a NATA accredited NDT testing laboratory under which a quality assurance system is required and audited.

In the performance of non destructive tests and the production of test reports ISO/IEC 17025 exceeds the requirements of AS 3901 and ISO 9001

Penstock barrels for Bogong Power Stationin sag mill at Hellyer Mine

Dartmouth Dam turbine casing and associated

Pipe work on site for BHP Methanol plant AltonaRail track welds Spotswood rail welding facility.Rail track welds Geelong to Serviceston via Maroona

Warrnambool to South Geelong and Alice Springs to

Alpine/BHP

105 Steel bridge pans for Eastlink Freeway MelbourneFrames, Crusiforms & Plates for Melbourne

laboratory under which a quality assurance system

In the performance of non destructive tests and the production of test reports ISO/IEC 17025