Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Single PCB View - Original
Top View Bottom View
Summary - General - Original
PCB Size 67.600 mm x 31.750 mm Surface Finish unknown
PCB Thickness 1.600 mm Max. Aspect Ratio on PTH 8.0
Customer Panel Size Drilled SMD Pads Yes
Copper Layers 6 SMD Pads Top 669
Solder Mask Both SMD Pads Bottom 265
Solder Mask Color unknown BGA Pads Top 352
Legend Both BGA Pads Bottom 0
Legend Color unknown Drill Hole Density 4761 Holes/dm2
Peeloff Mask None Pressing Stages 1
Carbon Mask None Number of Nets 368
Edge Connectors Yes Electrical Test Double Sided
1 2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18 19 20 21 22
Summary - Copper Layer Minima - Original
Layer Type CopperWidth
CriticalCopperWidth
TraceWidth
CriticalTraceWidth
Copper toCopper
Clr.
Trace toTrace Clr.
Same NetClr.
Ring Plated Copper toNPTH Clr.
Copper toOutline Clr.
mm mm mm mm mm mm mm mm mm mm mm
Outer 0.080 0.089 0.100 0.100 0.100 0.100 0.004 0.098 0.200 0.100 0.000
Inner 0.100 0.100 0.100 0.100 0.100 0.100 0.016 0.100 0.200 0.100 0.127
Summary - Sequences - Original
Type Sequences Tools Min. EndDia.
Max. EndDia.
Holes Routs Ring onOuter
Ring onInner
Hole toCopper Clr.
mm mm mm mm mm
PTH 1 4 0.200 0.700 1012 0 0.098 0.100 0.200
NPTH 1 2 1.800 1.800 2 0 >0.800 >0.800 0.100
Total 2 6 0.200 1.800 1014 0 0.098 0.100 0.100
Integr8tor v2019.05-190514 Page1The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:53
Summary - Rout - Original
Type Tools Min. End Dia. Max. End Dia. Draw Length
mm mm mm
Plated
NPTH
Total
Integr8tor v2019.05-190514 Page2The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:53
Files - Original
Initial Renamed Format Function Position Color
XS6SOM_Pads_Top.gbr XS6SOM_Pads_Top_gbr gerx2 pads top
XS6SOM_Paste_Top.gbr XS6SOM_Paste_Top_gbr gerx2 paste top
XS6SOM_Legend_Top.gbr XS6SOM_Legend_Top_gbr gerx2 legend top unknown
XS6SOM_Soldermask_Top.gbr XS6SOM_Soldermask_Top_gbr gerx2 soldermask top unknown
XS6SOM_Copper_Signal_Top.gbr XS6SOM_Copper_Signal_Top_gbr gerx2 outer 1
XS6SOM_Copper_Signal_1.gbr XS6SOM_Copper_Signal_1_gbr gerx2 inner 2
XS6SOM_Copper_Signal_2.gbr XS6SOM_Copper_Signal_2_gbr gerx2 inner 3
XS6SOM_Copper_Signal_3.gbr XS6SOM_Copper_Signal_3_gbr gerx2 inner 4
XS6SOM_Copper_Signal_4.gbr XS6SOM_Copper_Signal_4_gbr gerx2 inner 5
XS6SOM_Copper_Signal_Bot.gbr XS6SOM_Copper_Signal_Bot_gbr gerx2 outer 6
XS6SOM_Soldermask_Bot.gbr XS6SOM_Soldermask_Bot_gbr gerx2 soldermask bottom unknown
XS6SOM_Legend_Bot.gbr XS6SOM_Legend_Bot_gbr gerx2 legend bottom unknown
XS6SOM_Paste_Bot.gbr XS6SOM_Paste_Bot_gbr gerx2 paste bottom
XS6SOM_NPTH_Drill.gbr XS6SOM_NPTH_Drill_gbr gerx2 unplated 1-6
XS6SOM_PTH_Drill.gbr XS6SOM_PTH_Drill_gbr gerx2 plated 1-6
XS6SOM_Pads_Bot.gbr XS6SOM_Pads_Bot_gbr gerx2 pads bottom
XS6SOM_Drawing_1.gbr gerx2 document
XS6SOM_Drillmap_1.gbr XS6SOM_Drillmap_1_gbr gerx2 drillmap none
XS6SOM_Mechanical_1.gbr XS6SOM_Mechanical_1_gbr gerx2 mechanical none
XS6SOM_Mechanical_11.gbr XS6SOM_Mechanical_11_gbr gerx2 mechanical none
XS6SOM_Mechanical_13.gbr XS6SOM_Mechanical_13_gbr gerx2 mechanical none
XS6SOM_Mechanical_2.gbr XS6SOM_Mechanical_2_gbr gerx2 mechanical none
XS6SOM_Mechanical_3.gbr XS6SOM_Mechanical_3_gbr gerx2 mechanical none
XS6SOM_Mechanical_4.gbr XS6SOM_Mechanical_4_gbr gerx2 mechanical none
XS6SOM_Mechanical_7.gbr XS6SOM_Mechanical_7_gbr gerx2 mechanical none
XS6SOM_Mechanical_8.gbr XS6SOM_Mechanical_8_gbr gerx2 mechanical none
XS6SOM_Mechanical_9.gbr XS6SOM_Mechanical_9_gbr gerx2 mechanical none
XS6SOM_Profile.gbr XS6SOM_Profile_gbr gerx2 cad_outline none
Status Report.Txt text document
XS6SOM-macro.APR_LIB text document
XS6SOM.EXTREP text document
XS6SOM.REP text document
XS6SOM.RUL text document
XS6SOM.apr text document
PCB (Single) - Original
PCB Size Outline Type Outline Length Outline Area Copper Layers PCB Thickness
mm x mm mm dm2 mm
67.600 x 31.750 real 210.832 0.2130 6 1.600
Integr8tor v2019.05-190514 Page3The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:53
Copper Layer Minima & Area - Original
File Pos. Copper Width CriticalCopper Width
Trace Width Critical TraceWidth
Copper toCopper Clr.
Same NetClr.
Copper Area
mm mm mm mm mm mm dm2 %
XS6SOM_Copper_Signal_Top_gbr
1 0.080 0.089 0.100 0.100 0.100 0.004 0.1407 66
XS6SOM_Copper_Signal_1_gbr
2 0.125 >0.500 >0.400 >0.400 0.100 0.016 0.1975 93
XS6SOM_Copper_Signal_2_gbr
3 0.100 0.100 0.100 0.100 0.100 0.026 0.1524 72
XS6SOM_Copper_Signal_3_gbr
4 0.100 0.100 0.100 0.100 0.100 0.016 0.1498 70
XS6SOM_Copper_Signal_4_gbr
5 0.122 0.254 0.350 0.350 0.100 0.019 0.1920 90
XS6SOM_Copper_Signal_Bot_gbr
6 0.100 0.100 0.100 0.100 0.100 0.008 0.1704 80
Copper Layer Minima - Copper vs Drill - Original
File Pos. Ring Copper vs Drill Clr. Copper to Outline Clr.
Overall Via Laser Via Comp. Mech. Plated NPTH Overall Pad toOutline
Track toOutline
Region toOutline
mm mm mm mm mm mm mm mm mm mm mm
XS6SOM_Copper_Signal_Top_gbr
1 0.099 0.099 0.150 0.200 0.100 0.000 0.250 0.718 0.000
XS6SOM_Copper_Signal_1_gbr
2 0.100 0.100 0.150 0.200 0.100 0.127 0.910 >1.600 0.127
XS6SOM_Copper_Signal_2_gbr
3 0.100 0.100 0.150 0.200 0.100 0.127 0.910 0.895 0.127
XS6SOM_Copper_Signal_3_gbr
4 0.100 0.100 0.150 0.200 0.100 0.127 0.910 1.191 0.127
XS6SOM_Copper_Signal_4_gbr
5 0.100 0.100 0.150 0.200 0.100 0.127 0.309 >1.600 0.127
XS6SOM_Copper_Signal_Bot_gbr
6 0.098 0.098 0.150 0.200 0.100 0.044 0.250 1.016 0.044
Copper Layers - Clearance Details - Original
File Pos. Copper to Copper Clr.
Overall Pad to Pad Pad to Track Track to Track Trace to TraceClr.
mm mm mm mm mm
XS6SOM_Copper_Signal_Top_gbr 1 0.100 0.100 0.100 0.100 0.100
XS6SOM_Copper_Signal_1_gbr 2 0.100 0.100 0.100 >0.500 >0.500
XS6SOM_Copper_Signal_2_gbr 3 0.100 0.100 0.100 0.100 0.100
XS6SOM_Copper_Signal_3_gbr 4 0.100 0.100 0.100 0.100 0.100
XS6SOM_Copper_Signal_4_gbr 5 0.100 0.100 0.100 0.100 >0.500
XS6SOM_Copper_Signal_Bot_gbr 6 0.100 0.100 0.100 0.100 0.100
Integr8tor v2019.05-190514 Page4The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:53
Copper Areas - Original
Side Total Free of Edge Connectors
Solder Mask(as supplied)
Solder Mask(open vias)
Gold Mask Silver Mask Fingers Finger Size Total Area
dm2 dm2 dm2 dm2 dm2 mm x mm dm2
Top (incl. 1/2 plated holes and routs) 0.1897 0.0398 0.0937 100 0.450 x 2.300 0.0104
Bottom (incl. 1/2 plated holes and routs) 0.2194 0.0277 0.0816 100 0.450 x 2.300 0.0104
Total (incl. plated holes and routs) 0.4090 0.0675 0.1753 200 0.0208
Drill Tools - Original
File ToolNr.
Span Type Method Filled Via Counter Dia. Tol. Min Tol.Plus
Holes(in
PCB)
Routs(in
PCB)
DoubleHits (in
File)
PredrillHits (in
File)mm mm mm
XS6SOM_NPTH_Drill_gbr
109 1-6 NPTH mech. unknown unknown 1.800 0.000 0.000 1 0 0 0
XS6SOM_NPTH_Drill_gbr
110 1-6 NPTH mech. unknown unknown 1.800 0.000 0.000 1 0 0 0
XS6SOM_PTH_Drill_gbr
111 1-6 PTH mech. unknown unknown 0.700 0.000 0.000 2 0 0 0
XS6SOM_PTH_Drill_gbr
112 1-6 PTH mech. unknown unknown 0.200 0.000 0.000 938 0 0 0
XS6SOM_PTH_Drill_gbr
113 1-6 PTH mech. unknown unknown 0.330 0.000 0.000 24 0 0 0
XS6SOM_PTH_Drill_gbr
114 1-6 PTH mech. unknown unknown 0.300 0.000 0.000 48 0 0 0
Drill Tools - Drill vs Copper - Original
File Tool Nr. Span Type Method Dia. Ring onOuter
Ring onInner
Pad Size
mm mm mm mm
XS6SOM_NPTH_Drill_gbr 109 1-6 NPTH mech. 1.800 >0.800 >0.800
XS6SOM_NPTH_Drill_gbr 110 1-6 NPTH mech. 1.800 >0.800 >0.800
XS6SOM_PTH_Drill_gbr 111 1-6 PTH mech. 0.700 0.150 0.150 1.000
XS6SOM_PTH_Drill_gbr 112 1-6 PTH mech. 0.200 0.098 0.100 0.396
XS6SOM_PTH_Drill_gbr 113 1-6 PTH mech. 0.330 0.165 0.165 0.660
XS6SOM_PTH_Drill_gbr 114 1-6 PTH mech. 0.300 0.099 0.100 0.498
Sequences - Original
Span Type Tools Min. EndDia.
Max.End Dia.
Holes Ring onOuter
Ring onInner
Hole toCopper
Clr.
Hole toHole Clr.,
within Seq.
Overlapping Holes,
within Seq.
Hole toHole Clr.,between
Seqs
Hole toOutline
Clr.
Min. Slotto
OutlineClr.
mm mm mm mm mm mm mm mm mm
1-6 PTH 4 0.200 0.700 1012 0.098 0.100 0.200 0.219 No >0.800 0.409 disabled
1-6 NPTH 2 1.800 1.800 2 >0.800 >0.800 0.100 >1.600 No 0.302 1.100 disabled
All All 6 0.200 1.800 1014 0.098 0.100 0.100 0.219 No 0.409 disabled
Rout Tools - Original
File Tool Nr. Type Tool Dia. End Dia. Draw Length Nibble Count
mm mm mm
Integr8tor v2019.05-190514 Page5The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:53
Routed Holes - Original
File Hole Nr. Instances X Size Y Size Draw Length Nibble Count
mm mm mm
Bare Board Test - Original
Side Testable Points(TPs)
Max. TP Density SMD Pads Min. SMD Pad Pitch of Min. SMDPad
Fingers
TP/dm2 mm mm
Top 812 6623 669 0.240 0.400 100
Bottom 408 2534 265 0.450 0.900 100
Both 1220 6623 934 0.240 0.400 200
Todo's - Original
Functional copper outside or touching outline. Please check outline 'XS6SOM_Copper_Signal_Top_gbr'
Input Remarks - Original
Gerber import: Standard attribute '.FileFunction' with value 'Drawing' is invalid for %TF, continuing. 'XS6SOM_Drawing_1.gbr' (at line 5)
Gerber import: Non-standard .FileFunction attribute value Drawing, interpreted as extra layer 'XS6SOM_Drawing_1.gbr' (at line 4530)
Gerber import: Self-intersecting contours are detected, continuing with an interpretation of the contours. 'XS6SOM_Legend_Top.gbr' (at line 3381)
Stackup - Original
Pressing Stages 1
Sequences Analysis - Original
File Pos. StackedVias
Overlapped Vias
Min. ViaPlug Clr.
Top Tool Bottom Tool
Top Drill File Tool Nr. Dia. Bottom Drill File Tool Nr. Dia.
mm mm mm
Integr8tor v2019.05-190514 Page6The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:54
Scoring - Minimum Clearance - Original
File Pos. Copper to ScoreTop
Copper to ScoreRight
Copper to ScoreBottom
Copper to ScoreLeft
mm mm mm mm
XS6SOM_Copper_Signal_Top_gbr 1 0.133 0.422 0.250 0.000
XS6SOM_Copper_Signal_1_gbr 2 0.127 0.163 0.254 0.127
XS6SOM_Copper_Signal_2_gbr 3 0.127 0.163 0.254 0.127
XS6SOM_Copper_Signal_3_gbr 4 0.127 0.163 0.254 0.127
XS6SOM_Copper_Signal_4_gbr 5 0.127 0.163 0.254 0.127
XS6SOM_Copper_Signal_Bot_gbr 6 0.112 0.078 0.250 0.212
Scoring - Routing (based on outline analysis) - Original
Side Lines Min. Score Lines Clr. Saved Routing Remaining Routing
mm mm mm
Horizontal Score Lines
Top 1 0.112 >1.600
Mid 0
Bottom 1 0.250 >1.600
Vertical Score Lines
Left 1 0.000 >1.600
Mid 0
Right 1 0.078 >1.600
All Score Lines4 0.000 179.950 30.882
Solder Mask - Original
Side Min. Mask toMask Clr.
Min. Web Min. Ring onCu Defined
Pads
Min. Ring onSM Defined
Pads
Min. Mask toCopper Clr.
Fully CoveredVia Holes
Partly CoveredVia Holes
Half Mask Vias
mm mm mm mm mm
Top >0.250 0.160 0.069 0.000 0.100 Yes Yes
Bottom 0.015 0.015 >0.250 0.000 0.081 Yes Yes
Both 0.015 0.015 0.069 0.000 0.081 Yes Yes Yes
SMD (Including BGA Pads) - Original
Side SMD Pads(Total)
Min. SMDPad
Pitch of Min.SMD Pad
Solder MaskDefined Pads
SMD Pads(Excl. BGA)
BGA Pads BGA Min.Pitch
All Tracks inBGA
Centered
BGA Drilled
mm mm mm
Top 669 0.240 0.400 6 317 352 0.750 No No
Bottom 265 0.450 0.900 3 265 0
Both 934 0.240 0.400 9 582 352 0.750 No No
Integr8tor v2019.05-190514 Page7The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:54
DFM Classes - Original
Standard Advanced
3 4 5 6 7 8 9 10 11 12
Track & Gap min Clearance (Track-Track / Track-Pad / Pad-Pad)
0.100 300.000 200.000 150.000 120.000 100.000 100.000 85.000 75.000 60.000 <
min Track Width / minThermal Gap
0.089 300.000 200.000 150.000 120.000 100.000 100.000 85.000 75.000 60.000 <
Ring for IPCClass 2
min Outer Layer AnnularRing
0.098 200.000 175.000 150.000 120.000 100.000 100.000 75.000 75.000 60.000 <
min Inner Layer AnnularRing
0.100 225.000 200.000 175.000 145.000 125.000 125.000 100.000 100.000 85.000 <
Aspect Ratio max aspect ratio forPlated hole
8.000 3.200 3.600 4.000 4.600 5.300 6.400 6.400 - - -
Drill - Cu distance Plated hole toPlated hole
0.219 750.000 600.000 500.000 410.000 350.000 350.000 285.000 275.000 230.000 <
distance Non-plated holeto Cu on inner layers
0.100 IAR +25
IAR +25
IAR +25
IAR +25
IAR +25
IAR +25
IAR +25
IAR +25
IAR +25
<
distance Non-plated holeto Cu on outer layers
0.100 350.000 300.000 250.000 200.000 200.000 200.000 150.000 100.000 75.000 <
Cu Thickness maximum total Cuthickness that can beetched (no minimum)
105.000 70.000 60.000 50.000 35.000 35.000 20.000 15.000 15.000 <
Solder Mask solder mask annular ring& track overhang
0.069 150.000 100.000 75.000 60.000 50.000 50.000 42.500 37.500 30.000 <
solder mask solderweb 0.015 200.000 150.000 125.000 100.000 100.000 100.000 87.000 87.000 75.000 <
Integr8tor v2019.05-190514 Page8The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:54
1 2
3 4
5 6
Summary Minimum Design Characteristics - Locations - Original
Copper WidthOuter Layers0.080 mm
Critical Copper WidthOuter Layers0.089 mm
Trace WidthOuter Layers0.100 mm
Critical Trace WidthOuter Layers0.100 mm
Copper to Copper Clr.Outer Layers0.100 mm
Trace to Trace Clr.Outer Layers0.100 mm
Integr8tor v2019.05-190514 Page9The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:54
7 8
9 10
11 12
Same Net Clr.Outer Layers0.004 mm
RingOuter Layers0.098 mm
PlatedOuter Layers0.200 mm
Clr. to NPTHOuter Layers0.100 mm
Copper to Outline Clr.Outer Layers0.000 mm
Copper WidthInner Layers0.100 mm
Integr8tor v2019.05-190514 Page10The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:55
13 14
15 16
17 18
Critical Copper WidthInner Layers0.100 mm
Trace WidthInner Layers0.100 mm
Critical Trace WidthInner Layers0.100 mm
Copper to Copper Clr.Inner Layers0.100 mm
Trace to Trace Clr.Inner Layers0.100 mm
Same Net Clr.Inner Layers0.016 mm
Integr8tor v2019.05-190514 Page11The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:55
19 20
21 22
RingInner Layers0.100 mm
PlatedInner Layers0.200 mm
Clr. to NPTHInner Layers0.100 mm
Copper to Outline Clr.Inner Layers0.127 mm
Integr8tor v2019.05-190514 Page12The information on this document is not only based on files in a clearly defined format, but also on freely structured files and inference rules. Ucamcostrives to make it as accurate as possible, but it cannot guarantee the result in all situations. This information is used at the sole risk of its user.
Name 2019 06 14 Altium XS6SOM X2.7z Id. 303 - QED Check Todo's
Report Generated on 20-jun-2019 11:24:55