N Series Box Shear (NBS)Compact, Robust and Reliable

The Metso NBS is a very compact, robust and reliable horizontal scrap shear. It is designed as one single unit that is easy to

transport and install. Ideal for small scrap processors, remote job sites or temporary demolition sites. This is a very versatile shear

that can process miscellaneous material including sheet metal scrap, ELV auto bodies, skeletal scrap, rebar, pipe, profiles and

selected HMS. All components, including the power and control units, are integrated within one single box design, small enough to

be hoisted on a truck equipped with a hooklift. With the remote control and the fully automatic processing mode of the shear, the

operation does not require a dedicated machine operator. Also, in combination with its large hopper (optional), the shear can be

fed continuously.

The material to be processed is continuously fed into the feed hopper (A). The horizontally moving stepped

compression unit functions as a combination of pusher and stamper. It supports the gravity based movement

of the material downward and forward to the shear blades while at the same time compressing the material and

holding it against the front wall of the box during the shearing process (B).

The main hydraulic cylinder moves the horizontal bladeslide forward, underneath the compression unit. Blades

mounted on the front of the bladeslide and at the lower edge of the box front wall shear the material (C). The

continued movement of the bladeslide pushes the cut material horizontally out of the cutting chamber onto

the ground (D).

Features

Operation

• Small space requirement for operation• Economical automatic operation• Production ranges up to 10 t/h (11 TPH)• Continuous loading• Replaceable wear plates in high wear areas• Automatic lubrication

• Electric or Diesel drive options• Quick and easy transport and installation • No permanent foundation required• Hook lift system for truck transport• Minimal installation time required on-site

www.metso.com

Figure A Figure B Figure C Figure D

Model Units

Shearing force

Stamper force

Blade width

Drive capacity

Hourly output, Shearing

Feed opening width

Feed opening length

Machine dimensions width

Machine dimensions length

Machine dimensions height

Machine weight

Blade opening, max. height

Blade opening, width

Charge box, Volume

Max. operating pressure

t / sh.tn.

t / sh.tn.

mm / in

kW / HP

t/h / TPH

mm / in

mm / in

mm / in

mm / in

mm / in

t / sh.tn.

mm / in

mm / in

m3 / ft3

bar / PSI

450 / 496

160 / 176

1.500 / 59.1

75 / 100

up to 8 / 9

1.500 / 59.1

2.400 / 94.5

2.600 / 102

5.600 / 220.5

2.600 / 102.4

34 / 37

420 / 16.5

1.500 / 59.1

4.2 / 148

320 / 4641

450 / 496

160 / 176

1.500 / 59.1

95 / 130

up to 10 / 11

1.500 / 59.1

2.400 / 94.5

2.600 / 102

5.600 / 220.5

2.600 / 102.4

35 / 39

420 / 16.5

1.500 / 59.1

4,2 / 148

320 / 4641

NBS 416-15 FL24,75 kW (Diesel)

NBS 416-15 FL24,95 kW (Diesel)

N Series Box Shear- Basic Technical Data

* This information is only a general description and represents approximate values. It is not guaranteed and contains no warranties or assurances of any kind.

* The performance data are strongly dependent on the type and composition of the input material, the feeding density as well as the qualification of the operator.

www.metso.com

N Series Box Shear (NBS)Compact, Reliable and Easy Installation