MyHOME Up - legrand.co.uk · 2. The total amount of cable used to make up the entire wiring structure cannot exceed 500 m. Example of wiring 20 m 30 m 50 m 20 m 25 m 10 m 10 m 10

TECHNICAL GUIDE

MyHOME_UpHOME AUTOMATION

P O W E R E D B Y S P E C I A L I S T S

2

HOME AUTOMATION EVOLUTION

MyHOME_Up

PROGRAMME BY LEGRAND

The MyHOME_Up app is available for download

on the App Store and Google Play

BUSMyHOME_Up

Hometouch

LAN

LAN

MyHOMEserver1

Hometouch can be used as an internal unit for video door entry systems and a touch screen for the MyHOME_Up system

Note: Hometouch connection to network can be done via LAN or WiFi

Dedicated app(Android and iOS)

Video door entry system

3TECHNICAL GUIDEMyHOME_Up

ContentsHome automation for everyone 4System installation 6Guidelines 8

MyHOME_Up – system functions:- Lighting control system 10- Temperature control system 14- Consumption display system 16

MyHOME_Up – what the user can manage: - Lighting control 17- Controlling coloured lights from third parties 17- Rolling shutter automation 18- General light and rolling shutter controls 18- Automate other devices 18- Temperature control 19- Energy / consumption display 19- Nuvo multi-zone audio distribution 20- Smart TV 21- Favourite controls 22- Scenes 23- Remote control 25

4

BUS

MyHOME_UpHOME AUTOMATION

Home automation for all A single app to easily associate devices, and to control and personalise all MyHOME_Up functions.

MyHOME_Up is the new connected home automation solution with app control, that allows the installer to provide high quality systems with just a few simple start-up steps.

MyHOME_Up system

MyHOMEserver1


The MyHOME_Up logic is simple: it is a smart electrical and digital infrastructure using 2-wire BUS technology to connect devices and MyHOME_Up, with an innovative app for the installer and end user.

The dedicated app allows: the installer to easily associate multiple devices when starting up the system, thanks to the self-learning procedure

the user to manage their home automation system, whenever and wherever.

NOT JUST FOR MyHOME_UpThe app can also manage products from other manufacturers integrated into the MyHOME_Up system, to control functions such as:

Audio

Coloured lighting

Smart TV

MyHOME_Up

KitchenGround �oor +

Music

Coloured light

Light

Rolling shutter

6

MyHOME_UpSYSTEM INSTALLATION

Connect the devices and the MyHOMEserver1 to the BUS system.The self-learning procedure will be completely automatic. After a few minutes, all the actuators will be working perfectly in default mode.

Open the app which will connect to the system using Access Point.

Download MyHOME_Up free from the app and Google Play stores.

After logging in, select the room and the function to be associated.

13

4

2MyHOMEserver1

Discover how easy it is to associate device functions.

Assigning functions to multiple devices is quick and easy, and can be performed in just a few simple steps.

KitchenGround...

3

Cancel

Add an object

Light Shutter Thermostat

Controlled socket

Smart TVPlayer

EnergyAudioMyHome

Door lock


Press the push buttons of the devices you want to associate; if it is difficult for you to reach the devices, you can select them from the list which the MyHOME_Up app has found on your system.

Associate the control devices by pressing their push buttons. Once associated, all the controls selected will be working perfectly. You will have also created the graphic object to check the function from a mobile device.

Your work is complete. You and your customer can manage the set functions.

5

6

Evening going out Start condition

No start condition for this scenario

End

Add a conditionCancel

OK

Identified device

MOD: H4652/2 ID: 00B475CE

Choose the pushbutton to be associated

1 2

✔

PUSH BUTTON

PUSH BUTTON

8

MyHOME_Up

Installation guidelines

Functions which can be set and managed by the MyHOME_Up app are described below:

The main rules for system design and installation are also given; for more information consult the document “MyHOME – Guide to design and installation” available at www.bticino.com/solutions/home-automation

MyHOME_Up wiring features

LEN

Control device

Control device

Actuators in switchboard

BUS

Junction box

Actuator

Junction box

The MyHOME_Up home automation system uses BUS installation technology. Devices are connected in parallel through a 2-wire system, used to transport the information and low-voltage electrical power supply (27 V d.c.).

The power line for the load power supply is free of the control line and the control line is independent of the functional wiring, which can be seen in the diagram below.

EXAMPLE OF WIRING FOR LIGHTING SYSTEM

BUS


How to wire

MyHOME has been designed to utilise a free structured BUS wiring topology, meaning cabling to devices can be run and connected from any part of the system. There are only two rules that need to be checked when adding cable:

1. The furthest distance from the BUS power supply to any MyHOME device when using MyHOME cable cannot exceed 250 m.2. The total amount of cable used to make up the entire wiring structure cannot exceed 500 m.

Example of wiring

20 m

30 m

50 m

20 m 25 m

10 m

10 m

10 m

50 m

50 m

50 m

25 m 10 m

MyHome device

Furthest cable distanceMyHome device

Junction

Furthest cable distancefrom PSU = 250 m

To more DIN rail devicesTotal cable used in cabinet = 5 m

Total cable used in the installation = 415 m of a 500 m maximumBased on L4669 cable

10

MyHOME_UpSYSTEM FUNCTIONS

The system can manage up to 175 loads (lamps, shutters, controlled sockets etc.).The MyHOME_Up app provides simple set-up of the lighting control system and checking of the operation of individual devices.You can associate devices found in the system and create single or general commands and groups of lights and rolling shutters.

Possible functionsUsing the MyHOME_Up app you can manage:

different lights and loads with ON/OFF and dimmed control

rolling shutters with UP/DOWN control and management of the preferred position

automatic switching on of loads as a function of presence (using sensors) or the closing of a contact (using contact interfaces).

230 Vac.

Power supply

LightsShutters Shutters

DIN module actuator

DIN module dimmer actuator

Traditional device

Basic contact interface

Rolling shutter control/actuator

General control 8-Key control Green switch

LIGHTING CONTROL system

TV/SAT IPTV

automazione di�usione sonora antifurto termoregolazione videocitofonia controllo controllo carichilan energia luci tvcc www irrigazione

TV/SAT IPTV



Installation rulesForming the BUS: with grey cable Cat. No. L4669 or Cat. Nos. L4669/500 and L4669KM1.Max. length of the BUS: 500 mSelecting the power supply: select the power supply according to the total absorption of the devices.Use power supply Cat. No. E49 for absorptions less than 600 mA. If between 600 mA and 1200 mA, use Cat. No. E46ADCN. The absorption value is indicated on the technical card of each device.

Touch control

Lights Shutters

Local control Touch screen

Shutter control/ actuator

Basic actuator

Associating the devices and definition of the functions:By means of installing the MyHOMEserver1 device in the system and using the MyHOME_Up app for tablet and smartphone.

MyHOMEserver1

TV/SAT IPTV


12


Max. distances - system expansionLighting control systems with BUS wiring more than 500 metres long, and current absorption values greater than 1200 mA, must be subdivided into several stretches, each with its own power supply and connected using interface Cat. No. F422 in ‘non-configured’ mode.

The interface will be configured by the MyHOME_Up app and the MyHOMEserver1 device connected to the IN terminal of the first interface.The system can be extended using up to four interfaces Cat. No. F422.

OUT

IN

C I1 = –I2 = –I3 = –I4 = –MODE = –

OUT

IN

C I1 = –I2 = –I3 = –I4 = –MODE = –

OUT

IN

C I1 = –I2 = –I3 = –I4 = –MODE = –

OUT

IN

OUT

IN

OUT

IN

Lighting control No. 1 Lighting control No. 3

WARNING: the interfaces must belong to a production batch 12W20 or later.

System Speed Link

SCS2-1

MyHOMEserver1

To the LAN network or router modem

Lighting control No. 4Lighting control No. 2

LIGHTING CONTROL system

Installation rules


Integration with other systemsUse interfaces Cat. No. F422 with ‘galvanic separation – position MOD = 0’ mode to integrate the lighting control system with the video door entry system. The address must be defined in position I4 of the two interfaces.Connect MyHOMEserver1 to the integrated system for the

definition of the functions only after the interfaces have been configured.The system is integrated with the temperature control and consumption display system without using interfaces because all devices share the same BUS.

OUT

IN

C I1 = –I2 = –I3 = 3I4 = 2MODE = 1

OUT

IN

C I1 = –I2 = –I3 = 7I4 = 7MODE = 1

OUT

IN

C

OUT

IN

C

I1 = –I2 = –I3 = 5I4 = 4MODE = 1

I1 = –I2 = –I3 = -I4 = 1MODE = -

OUT

IN

OUT

IN

OUT

IN

OUT

IN

Lighting control No. 2

Lighting control No. 1 Lighting control No. 3

Lighting control No. 4

WARNING: the interfaces must belong to a production batch 12W20 or later.

System Speed Link

SCS2-1

MyHOMEserver1

To the LAN network or router modem

Video door entry system

14


System to control a temperature control system which can be made in two types: with control unit Cat. No. 3550 and probes (see product guide for the range) for the management of up to 99 zones

without control unit and using display thermostat Cat. No. 0674 59 used as zone thermostat, for the management of up to 99 zones.

Manageable functionsa. Systems with central unit: - temperature display, touch screen and app - setting the profiles using 99-zone central unit - temperature management in the scenarios

created with MyHOME_Up app.

Device configuration in the system: - with physical configuration or with

MyHOME_Suite software.

SYSTEM WITH CENTRAL UNIT CAT. NO. 3550

M0÷10 V

8 relay actuator

Cold

Hot

Zone 2 probe

Power supply 99-zone central unit

Zone 2 probe

Actuator for 0-10 V

solenoid valves

TEMPERATURE CONTROL system

MyHOMEserver1


The installer must carefully enter the system configuration parameters in the MyHOME_Up app for both types of system.

Installation rulesApply the indications for the lighting control system.

a. Systems without central unit: - temperature display and control using

display thermostat and app - temperature management in scenarios created

with the MyHOME_Up app

Device configuration in the system:- with physical configuration or with the MyHOME_Suite software.

SYSTEM WITH DISPLAY THERMOSTAT CAT. NO. 0674 59

With central unit Only 99-zone central unit*

Without central unit Display thermostat

Temperature display and control Using display thermostat app and touch screen

Using display thermostat and app

Temperature profile setting From central unit NoTemperature management in the MyHome_Up scenarios

Yes Yes

Compatible temperature control actuators All AllDisplay thermostat Yes (Master probe mode) Yes (Home mode)

M0÷10 V

8 relay actuator

Cold

Hot

Zone 1 display thermostat

Power supplyZone 2 display thermostat

Actuator for 0-10 V

solenoid valves

MyHOMEserver1

MANAGEABLE FUNCTIONS

* MyHOME_Up app cannot manage temperature control systems with a 4-zone control unit.

16

Energy meters to display (max. 255) electricity consumption and the production of instantaneous electrical energy.

CONSUMPTION DISPLAY system

Manage energy functionsThe instant electrical consumption/production value can be displayed on the touch screens and the MyHOME_Up app.Only touch screens can display electrical consumption/production history.The app can use the consumption value as a condition for activating smart scenarios.The installer must enter the address of compatible devices in the MyHOME_Up app.

The compatible devices are:- Cat. No. F520- Cat. No. F521 (only consumption display).

Installation rulesApply the indications for the lighting control system.

Configure device in the system:- with physical configuration or with MyHOME_Suite software.

Compact power supply

Electric power meter

Electric power meter

Inverters

Photovoltaic panel

Energy data

logger

LAN network

Energy display Central unit for load management

MyHOME_screen 3.5

MyHOMEserver1



WHAT THE USER CAN MANAGE

The following pages outline functions which the user can manage with the MyHOME_Up app.

The installer presets all the system parameters when setting

up the MyHOME_Up system, which are saved in the

MyHomeserver1 device.

LIGHTING control

Controlling coloured LIGHTS from third parties

Users can switch a lamp on/off and adjust its brightness using the light object associated to the devices in the system.

Philips Hue, Lifx and DMX coloured LED lamps can be controlled with the coloured light object, allowing you to select the light colour by sliding left or right on the coloured band.

Double roomFirst...

Double room Light 2

Close

Switch off

Double Room Light 2

First floor - Double room

KitchenGround...

Kitchen Light 1

Double roomFirst...

Double room Light

MyHOME_Up

18

ROLLING SHUTTER automation

Automate OTHER DEVICES

The status of a rolling shutter is adjusted using the rolling shutter object, by pressing the ‘down’ or ‘up’ icons.Just press ‘stop’ to stop the adjustment.If a specific actuator has been used, the rolling shutter can be set to open to a preset position.

The app allows objects to be created to simultaneously activate (ON/OFF and UP/DOWN) for all the rolling shutters or all the lights.

Loads connected to a controlled socket or electric door locks can be managed with the objects ‘controlled socket’ and ‘door lock’ associated to the devices.

Kitchen

Kitchen Rolling shutter 1

KitchenGround...


Close

DOWN

STOP

UP

Kitchen Rolling shutter 1 Ground floor - Kitchen

Ground...

Ground floor

Favourites

General LightsCompatible with BTicino-Legrand components

General Rolling shuttersCompatible with BTicino-Legrand components

BathroomGround...

Bathroom Switch 1

Bathroom

Bathroom Switch 1

1

Kitchen

Kitchen Door lock 1

1

KitchenGround...

Kitchen Door lock 1

Close

Open door lock

Kitchen Door lock 1Ground floor - Kitchen

ACTIVATE THE LOAD CONNECTED TO THE CONTROLLED SOCKET

ACTIVATE AN ELECTRICAL DOOR LOCK

General LIGHT AND ROLLING SHUTTER controls

Kitchen


KitchenGround...


Close

DOWN

STOP

UP

Kitchen Rolling shutter 2Ground floor - Kitchen

Kitchen


WHAT THE USER CAN MANAGEMyHOME_Up


ENERGY/CONSUMPTION display

TEMPERATURE CONTROL

Use the Thermostat object in MyHOME_Up to manage zone temperatures. With this function, users can control the associated MyHOME_Up thermostat, display the current temperature and set a temperature for each zone.

Using the Energy object, users can display the instantaneous energy consumption of a load (oven, washing machine, etc.) or the production of its solar power system.

Children bedroomFirst...

Children bedroom Thermostat 16.6 °C

1


Kitchen Thermostat 1 16.6 °C

Close

OFF

AUTO 321

ColdHot

20

16.6

Children bedroom ThermostatFirst floor - Children bedroom


Children bedroom Thermostat 16.6 °C



Close

OFF

AUTO 321

ColdHot

20

16.6

Children bedroom Thermostat First floor - Children bedroom

KitchenGround...

Cooker

Dishwasher

0,4 Kw

0,2 Kw

20

Nuvo multi-zone AUDIO distribution

The Nuvo audio sound system can be managed with the Player object to control each individual player.Using specific icons, the user can switch the player ON/OFF, adjust the audio volume and select a radio station or tune catalogued in libraries.

KitchenGround...

Kitchen Light 1

Kitchen Light 2


Kitchen Thermostat 1 - - °C

Kitchen PlayerRadio Library

Close

Artist A Album 2

Track 01

Kitchen

Kitchen Player

1

KitchenGround...

Kitchen Light 1

Kitchen Light 2


Kitchen Thermostat 1 - - °CClose

Track 04

Track 03

Track 02

Album 02

Track 01

All the tracks Track 01

Album

Kitchen

Kitchen Light 1

Kitchen Light 2



Album 01 Artist A

Album 02 Artist B

Album 03 Artist A

Album 01 Artist C

Album 02 Artist A

Album 03 Artist B

Album 01 Artist B

Album 02 Artist C

Album 03 Artist C

AlbumBack

Close

SELECTING A FAVOURITE RADIO SELECTING A TUNE FROM ONE OF THE LIBRARY ALBUMS

KitchenGround...

Kitchen Player

F

G

22

Kitchen

Kitchen Light 1

Kitchen Light 2



Track 04

Track 03

Track 02

Album 02

Track 01

All the tracks Track 01

Album

Kitchen

Kitchen Light 1

Kitchen Light 2



Album 01 Artist A

Album 02 Artist B

Album 03 Artist A

Album 01 Artist C

Album 02 Artist A

Album 03 Artist B

Album 01 Artist B

Album 02 Artist C

Album 03 Artist C

AlbumBack

Close

KitchenGround...

Kitchen Light 1

Kitchen Light 2



Radio 05

Radio 04

Radio 03

Radio

Radio 02

Radio 01

Kitchen

Kitchen Light 1

Kitchen Light 2




Close

NO RDS

Kitchen

Kitchen Light 1

Kitchen Light 2




Close

Local news A



SMART TVUsing a virtual remote control, users can control Samsung and LG Smart televisions to manage different TV functions – the same way as a real remote control.

Children bedroom


Close

Kitchen Smart TV 1 Ground floor - Kitchen

POWER MUTEMENU

32

4 65

7 98

0

1

Children bedroom


Close

Kitchen Smart TV 1 Ground floor - Kitchen

Source VOL

0

CH

OK

C

D

AB

1

PUSH BUTTONS WHICH MANAGE THE CHANNELS AND VOLUME

NOTE: this function is only compatible with Samsung 2014 SmartTV platform and LG Smart TV (Netcast 3.0 and Netcast 4.0 platforms released in 2012 and 2013).

22

FAVOURITE CONTROLSObjects and everyday scenarios which the user wants to activate quickly can be grouped together in a MyHOME_Up page called ‘Favourites’.Here, users can easily select frequently used objects in various rooms of their home.

SELECTING THE CONTROL TO SWITCH ON THE KITCHEN LIGHT AND LOADING IT TO THE FAVOURITES PAGE.

Favourites

Favourites Home Scenarios Other



Add the controls or scenarios more often used

Add

Kitchen Light 1

Kitchen switch 1


Kitchen Light 3

Kitchen Light 2

Kitchen Load control 1

Kitchen Smart TV 1

Kitchen Light 4


KitchenGround floor

Close

6

Favourites




Cancel

First floor

Ground floor

Favourite objects

Favourites




Close

Garden

Bathroom

Ground floor

Living room

Kitchen

Back

5

Favourites





Add

Kitchen Light 1

Kitchen switch 1


Kitchen Light 3

Kitchen Light 2


Kitchen Smart TV 1

Kitchen Light 4


KitchenGround floor

Close

6

Favourites




Cancel

First floor

Ground floor

Favourite objects

4

Favourites




Close

Garden

Bathroom

Ground floor

Living room

Kitchen

Back

Favourites





Add

Kitchen Light 1

Kitchen switch 1


Kitchen Light 3

Kitchen Light 2


Kitchen Smart TV 1

Kitchen Light 4


KitchenGround floor

Close

Favourites




Cancel

First floor

Ground floor

Favourite objects

4

Favourites




Close

Garden

Bathroom

Ground floor

Living room

Kitchen

Back

5

Ground floor


Favourites

Favourites



Kitchen

Living room

Favourites





Add

Kitchen Light 1

Kitchen switch 1


Kitchen Light 3

Kitchen Light 2


Kitchen Smart TV 1

Kitchen Light 4


KitchenGround floor

Close

Favourites


Kitchen Light 1Ground floor Kitchen





SCENESSetting up a scene allows users to activate multiple devices at the same time, to suit their movements and lifestyle.Within the MyHOME_Up app, users can create and activate scenes. This can be done manually by the user or automatically by setting particular conditions on the app, such as:

activating a preset push button in the system changing the status of an object (e.g. raising a rolling

shutter or switching a light on) weather conditions (for example when the wind is

more than 30 km/h) how far away the user is from their home preset times and days (e.g. at 8:00 from Monday to

Friday).

A message (mail and push notification) can be associated to each scene, warning the user that the devices have been activated.

Day Start condition


End


Date and time

Position

Weather

Start conditions

Objects

Pushbutton

Scenarios

Home Scenarios OtherFavourites

Day

Scenarios

Home Scenarios OtherFavourites

Day

1

Cancel

Start

Do you want to start Day?

Scenario performance

Day Actions to be performed

Back End

Kitchen Rolling shutter 1 Stop

Kitchen Rolling shutter 2 100 %

Add an action

1 min: 30 sec

Cancel

Email

Push notification

Waiting time

Object

Add an action

Day Actions to be performed

Back End

Kitchen Rolling shutter 1 Stop

Kitchen Rolling shutter 2 100 %

Add an action

1 min: 30 sec

Set the addressee

22

PUSH BUTTONS TO SELECT THE TYPE OF MESSAGE TO SEND AFTER THE SCENE IS PERFORMED

MANUAL ACTIVATION MENU TO SELECT THE SCENE STARTING CONDITIONS

Example of scene activation

24

The created scenes can be: modified by adding or removing

objects and varying the order of activation

cancelled copied, for example to create a

second scene very similar to the first, without having to enter all the objects from scratch

shared with other users who live in the home, who can manage home automation functions with their smartphones.

ACTIVATING THE BASIS OF WEATHER CONDITIONS

PUSH BUTTON TO ACTIVATE SCENES AS A FUNCTION OF THE DISTANCE FROM THE HOME

Day Start condition

Temperature more than 20°

End

Add a condition

Day Start condition


End Weather Close

Rome

Weather forecast: Clear

Wind speed: 0 km/h

Humidity: 62%

Dawn: 5:52 AM

Sunset: 21:8 PM

24 °

Day Start condition

End

400 600200 metres

MyHOMEServer1 +

When you arrive When you leave

OKDay Start condition


End


Date and time

Position

Weather

Start conditions

Objects

Pushbutton5

Day Start condition

Temperature more than 20°

End

Add a condition

Day Start condition


End Weather Close

Rome

Weather forecast: Clear

Wind speed: 0 km/h

Humidity: 62%

Dawn: 5:52 AM

Sunset: 21:8 PM

24 °

Day Start condition

End

400 600200 metres

MyHOMEServer1 +

When you arrive When you leave

OK

C

D

B

A

E

6

8

7

Day Start condition


End


Date and time

Position

Weather

Start conditions

Objects

Pushbutton



REMOTE CONTROLAs well as local control of the MyHOME_Up system, home automation functions can also be controlled remotely using the MyHOME_app.

MYHOME_UP SYSTEM

If the end user wants to control the system remotely, they must be enabled by the ‘administrator’ user (*) in a specific area of the MyHOME_Up app (see picture to the right).

Note (*): The ‘administrator’ user is the user who connects using the user code provided on the front of the MyHOMEserver1, whilst connected to the local Wi-Fi. This user creates the access credentials (username and password) for all of the end users.

The MyHOME_Up system is safe to use, whether it is managed on a home Wi-Fi network or a cloud-based platform – users’ passwords and credentials will be protected.

Using this solution does not require: home modem/router parameters to be modified A subscription to particular ADSL subscriptions or

cloud services.Cloud

List of usersBack

[email protected] access: 2016/07/18 14:51:32

New userCancel Create

User name [email protected]

New password Enter passw

New password Repeat password

Specify the user email address you want to add

Remote access

Permits or denies remote access for this user

Minimum 8 characters, upper and lower case, at least one numerical. These characters are not allowed: " ' < >.

List of usersBack


List of usersBack


[email protected] not active

CREATING AN END USER AND ENABLING REMOTE CONTROL OF THE SYSTEM.

Documents

MyHOME Up - legrand.co.uk · 2. The total amount of cable used to make up the entire wiring structure cannot exceed 500 m. Example of wiring 20 m 30 m 50 m 20 m 25 m 10 m 10 m 10