Multitouch Enhanced Development WARNING!!! Updating your Nook Tablet touchscreen firmware required new multi-touch driver in the kernel. If you run stock OS/cm7/cm9/10, it will mess up your touchscreen without the new multi-touch driver in the kernel. You will need a new kernel with the new multi-touch driver. I am providing the SDCard boot version of Chris's cm10-acclaim-0.06.1. http://www.mediafire.com/?9m7evrr50a4mecz Here's a flashable boot.img with the new multi-touch driver for chrmhoffmann's CM10 "Jelly Bean" 0.06.1 internal. I haven't test the file because I run CM10 on SDCard and not internal. Just beware, if you are using TWRP (I haven't use it, but cwm with touch based also required new kernel) You need to update your touchscreen firmware before flashing the new boot.img with cwm. http://www.mediafire.com/?689faxgu45wet6q Don't do this if you do not know what you are doing. It will cripple your device. Place 'ft5406-sc3052-1024X768.bin' into /system/etc/firmware and /system/lib/firmware (I know it belong to one of the two locations) Copy updatefw.sh to your SDCard. Open terminal. Type: ~: su ~: cd sdcard ~: sh updatefw.sh Notice "VENDORID=", if it's just "VENDORID=" or "VENDORID=00", you need to repeat "sh updatefw.sh" until it's "VENDORID=0xCD" (Might require 7-20 times). Notice "TPFWVER=" changes from "TPFWVER=13" or "TPFWVER=14" to "TPFWVER=0B".

Multitouch Enhanced Development

Download DOCX Report

Upload
beasant
View
215
Download
0

Embed Size (px)

DESCRIPTION

Citation preview

Multitouch Enhanced DevelopmentWARNING!!!Updating your Nook Tablet touchscreen frmware required new multi-touch driver in the kernel !" you run stock #$%cm&%cm'%()* it will mess up your touchscreen without the new multi-touchdriver in the kernel +ou will need a new kernel with the new multi-touch driver! am providing the $D,ard boot version o" ,hris-s cm()-acclaim-)).(http/%%wwwmediafrecom%0'm&evrr1)a2mec34ere-s a 5ashable bootimg with the new multi-touch driver "or chrmho6mann-s ,M() 78elly 9ean7 )).( internal! haven-t test the fle because ! run ,M() on $D,ard and not internal8ust beware* i" you are using T:;< =! haven-t use it* but cwm with touch based also required new kernel>+ou need to update your touchscreen frmware be"ore 5ashing the new bootimg with cwmhttp/%%wwwmediafrecom%0.?'"[email protected]'t do this if you do not know what you are doing. It will cripple your device.

,opy update"wsh to your $D,ard#pen terminalType/D/ suD/ cd sdcardD/ sh update"wshNotice 7EEND#;!DF7* i" it-s Gust 7EEND#;!DF7 or 7EEND#;!DF))7* you need to repeat 7sh update"wsh7 until it-s 7EEND#;!DF)@,D7 =Might require &-B) times>Notice 7T