MULTI-LOCATION ONLINE ONLY AUCTION • TEXAS & LOUISIANA

MULTI-LOCATION ONLINE ONLY AUCTION • TEXAS & LOUISIANAFeaturing: (10) CNC Horiz. Boring Mills; CNC Machining Center; CNC Vert. Boring Mills; CNC Vert. Turning Machines, CNC Lathes,

Manual Machine Tools, Laser, CNC Bending/Folding System, CNC Hyd. Pressbrake, Fabrication Equipment, Forklifts, Much, Much More!

Partial Terms & Conditions on Back Page of Brochure

ONLINE AUCTIONSALE DATE:

BIDS START CLOSING ON THURSDAY, NOV. 3

AT 10:00 A.M.

18% BUYER’S PREMIUM WILL APPLY

INSPECTION: See Each Location for Inspection Instructions

ONLINE BIDDING: YOU MUST

REGISTER IN ADVANCE FOR

ONLINE BIDDING AT THIS AUCTION.

Go to www.pmi-auction.com

and click on

on our calendar page for this auction sale.

Headquarters:1304 Langham Creek Drive, Suite 454

Houston, Texas 77084

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: [email protected]: www.pmi-auction.com

Ron Moore, Texas Lic. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

RAS GIGABEND MDL. 7630 BENDING/FOLDING SYSTEM

BULLARD 64" CUTMASTER VERT. TURRET LATHE

GIDDINGS & LEWIS MAG MDL. RT1600 CNC HORIZ. BORING MILLCNC

HNK MDL. HB-130CX CNC HORIZ. BORING MILLCNC

2006

2007

2000

REBUILT2010

AMADA MDL. LC2415 II LASER

2 3

CNC HORIZONTAL BORING MILLSHNK MDL. HB-130CX, new 12/2000, Fanuc Series 16M CNC control, 130mm boring spndl. dia., 225mm milling spndl. dia., 157" X-, 90.55" Y-, 51.18" Z-, 27.55" W-axis travels, 29.52" to 80.7" spndl. nose to tbl. center, 0 to 90.55" spndl. center to top of tbl., 33,000-lb. tbl. load, .001 deg. tbl. indexing, 26 kW spndl. motor, 3-spd. spndl.: 5–2,500 RPM, 63" sq. built-in rotary tbl., (2) combination tbl. wings which provide a 63" x 157-1/2" plain tbl. when aligned, chip conveyor, CAT-50 spndl. taper, spndl. chiller, Cool Jet hi-pressure thru spndl. coolant system, 40-pos. ATC, S/N 00055.DOOSAN MDL. DB130CX, new 7/2007, Fanuc 18i-MB CNC control, 63" x 71" tbl., 33,000-lb. load, .001 deg. indexing, 118" X-, 78.74" Y-, 62.99" Z-, 27.5"-W axis travels, CAT-50 spndl. taper, 2,500 RPM, 40 HP, full tbl. enclosure, spndl. chiller, 60-pos. ATC, S/N DB130CX0030.DOOSAN MDL. DB130C, new 4/2006, Fanuc 18i-MB CNC control, 5.12" spindle, 71-3/4" x 63" built-in rotary tbl., 33,000-lb. load, .001 deg. indexing, 118" X-, 78.74" Y-, 63" Z-, 27.5"-W axis travels, CAT-50 spndl. taper, 2,500 RPM, 35 HP, spndl. chiller, 60-pos. ATC, S/N DB130C0239.FEMCO MDL. BMC110R2, new 8/2005, 4.33" spndl., 56-1/2" x 63" tbl., 78.7" X-, 70.87" Y-, 66.9" Z-, 19.7" W-axis travels, CAT-50, 2,500 RPM, 35 HP, outriggers, 32-pos. ATC, chip conveyor, S/N B754675 (Note: this machine is currently not operating).

(2) FEMCO MDL. BMC110R2, new 8/2005, 4.33" spndl., 56-1/2" x 63" tbl., 78.7" X-, 70.87" Y-, 66.9" Z-, 19.7" W-axis travels, CAT-50, 2,500 RPM, 35 HP, outriggers, 32-pos. ATC, chip conveyor, S/N’S N.A. (Note: These machines are currently disassembled and are located in an off-site storage facility, please contact auctioneer for inspection details).

HNK MDL. HB-130CX CNC HORIZ. BORING MILL DOOSAN MDL. DB130CX CNC HORIZ. BORING MILL

DOOSAN MDL. DB130C CNC HORIZ. BORING MILL

FEMCO MDL. BMC110R2 CNC HORIZ. BORING MILL MAZAK MDL. FH880 CNC HORIZ. MACHINING CENTER

LOCATION ANATIONAL OILWELL VARCO

9768 E. Main Street, Houma, Louisiana 70363

INSPECTION: Wednesday, November 2, 9:00 A.M. to 3:00 P.M. or by appointment.

Contact Gerald Ledet (985) 868-9975 to arrange for an inspection prior to November 2.

CNC CNC

CNC

CNCCNC

20072000

2006

2005

2 3

YOUJI MDL. YV-1200ATC PLUS C CNC VERT. TURNING MACHINE

BULLARD 56" DYN-AU-TAPE CNC VERT. BORING MILL

HAAS MDL. TL3W CNC LATHE KINGSTON MDL. HR2000 GAP BED ENGINE LATHE

KALMAR MDL. DCD136 FORKLIFT

CNC HORIZONTAL MACHINING CENTER

MAZAK MDL. FH880, new 1998, M Plus CNC control, 31.5" pallet size, 51.8" X-, 43.3" Y-, 39.37" Z-travels, 35–7,000 RPM, CAT-50, 40 HP, 40-pos. ATC, thru spndl. coolant, tool presetter, chip conveyor, (25) assorted CAT-50 taper toolholders, S/N 135019.

CNC VERTICAL TURNING MACHINE

YOUJI MDL. YV-1200ATC PLUS C, new 7/2006, Fanuc 18i-TB control, 49" built-in faceplate w/(4) low jaws and (4) tall jaws, 53.15" turning dia., 63" max. cutting ht., 1–350 RPM tbl. spds., 2–2,400 RPM milling spds., 60 HP tbl. drive, 15 HP milling drive, 16-pos. ATC, CAT-50 spndl. taper, (11) as-sorted turning toolholders, coolant filtration sys-tem, chip conveyor, S/N 06V12TC1499.

CNC VERTICAL BORING MILLBULLARD 56" DYN-AU-TAPE, retrofitted 9/2008 by Essex Machine Tool Services, Fanuc 0iTC con-trol, 68" sw., 44" under rail, Siemens 55 kW spndl. drive motor, built-in 4-jaw chuck w/hard jaws, 12-pos. ATC w/approx. (8) H.D. turning tools, Essex Job No. 1243, S/N 32120.

GAP BED ENGINE LATHEKINGSTON MDL. HR2000, new 6/2004, 30" sw. over bed, 24" sw. over cross slide, spds.: 8–800 RPM, inch/metric thdng., taper attach., steady rest, 24" dia. 4-jaw chuck, 10" dia. 3-jaw chuck, 4.1" spndl. hole, Aloris toolpost w/approx. (18) holders, wide array of cutting tools, boring bars, live centers, etc., Newall 2-axis D.R.O., rapid traverse, S/N 2M390327S.

VERTICAL TURRET LATHEBULLARD 64" CUTMASTER, rebuilt 2010, 68" tbl. dia., built-in 4-jaw chuck, 72" ht. under rail, 36" stroke tilting L.H. ram, 32" stroke tilting R.H. turret, spds.: 13.8–133 RPM, side head, assorted turret tooling, S/N 25793.

CNC LATHESHAAS MDL. TL3W, new 9/2008, 30" sw. over apron, 18" sw. over cross slide, 60" btwn. centers, 3.5" spndl. hole, 1,800 RPM, 20 HP, 15-3/4" dia. 4-jaw manual chuck, Aloris toolpost, coolant system, S/N 3083053.HAAS MDL. TL3, new 9/2008, 20" sw. over apron, 13" sw. over cross slide, 60" btwn. centers, 3.5" spndl. hole, 1,800 RPM, 18 HP, Haas CNC control, Aloris Quick Change toolpost w/several holders, 16" dia. 4-jaw chuck, S/N 3083505.

FORKLIFTSKALMAR MDL. DCD136, new 2000, diesel pwrd., 13,600 kg @ 600mm L.C., 12,400 kg @ 700mm L.C., 11,400 kg @ 800mm L.C., 157" max. lift, pwr. forks, air brakes, 96" forks, 96"W. fork carriage, dual front solid rubber tires, S/N T33103.1160.NISSAN MDL. VFO5H70V, diesel pwrd., 15,500-lb. cap. @ 24" L.C., 14,305-lb. cap. @ 28" L.C., 13,280-lb. cap. @ 32" L.C., 157" max. lif t ht., 76"L. forks, 76"W. fork carriage, dual front solid rubber tires, S/N VFO5-001504.

ONLINE BIDDING:YOU MUST REGISTER

IN ADVANCE FOR ONLINE BIDDING AT

THIS AUCTION. Go to

www.pmi-auction.com and click on


LOCATION A

BULLARD 64" CUTMASTER VERT. TURRET LATHE

CNCCNC

CNC2004

2000

REBUILT2010

2008

RETROFIT

20082006

SALE DATE: BIDS START CLOSING ON THURSDAY, NOVEMBER 3 AT 10:00 A.M.

4 5

FEMCO MDL. BMC-110R2, Fanuc 21i-MB CNC control, 4.33" spndl., 56-1/2" x 63" tbl., 78.7" X-, 70.87" Y-, 66.9" Z-, 19.7" W-axis travels, CAT-50, 2,500 RPM, 35 HP, outrig-gers, S/N B770272 (Note: this machine was recently refreshed with new spndl. bearings and axis thrust bearings).FEMCO MDL. BMC-110R2, Fanuc 21i-MB CNC control, 4.33" spndl., 56-1/2" x 63" tbl., 78.7" X-, 70.87" Y-, 66.9" Z-, 19.7" W-axis travels, CAT-50, 2,500 RPM, 35 HP, outriggers, S/N B765382 (Note: this machine was recent-ly refreshed with new spndl. bearings, axis thrust bearings, and assorted control parts).FEMCO MDL. BMC-110R2, Fanuc 21i-MB CNC control, 4.33" spndl., 56-1/2" x 63" tbl., 78.7" X-, 70.87" Y-, 66.9" Z-, 19.7" W-axis travels, CAT-50, 2,500 RPM, 35 HP, outrig-gers, S/N B765383 (Note: Needs ATC repair, spndl. bearing W-axis bearing are bad, elec. drive connections need to be replaced, spndl. rotor bearing making noise, needs coolant pump).

DAEWOO ACE MDL. B130T CNC HORIZ. BORING MILL

FEMCO MDL. BMC-110R2 CNC HORIZ. BORING MILL (S/N B770272) DAEWOO MDL. ACE-B130 CNC HORIZ. BORING MILL

LOCATION B

NATIONAL OILWELL VARCOCYPRESS PLANT11744 Telge Road,

Cypress, Texas 77429

INSPECTION: Wednesday, November 2, 9:00 A.M. to 4:00 P.M.

or by appointment. Call PMI’s Houston office at (713) 691-4401 to arrange

an appointment. CNC HORIZONTAL BORING MILLSMAG GIDDINGS & LEWIS MDL. RT1600, new 11/2007, Fanuc 310i-A control, 6.1" spndl. dia., 63" x 98.4" built-in rotary tbl., 55,000-lb. tbl. load, .001 deg. tbl. indexing, 98.4" X-, 102.4" Y-, 98.4" W-, 49.2" Z-axis travels, CAT-50 taper, 3,500 RPM, 74 HP 60-pos. ATC, tall tbl. and saddle enclosure, chip conveyors, S/N 480-0103.DAEWOO ACE MDL. B130T, Fanuc Series 16i-M CNC control, 63" x 71" tbl., 11' cross travel, 7-1/2' column infeed travel, 6'-8" vert. head travel, 60-pos. ATC, CAT-50 taper, S/N NB130130.

GIDDINGS & LEWIS MAG MDL. RT1600 CNC HORIZ. BORING MILL

CNC

CNC

CNC CNC

3AVAILABLE


2007

4 5

SHARP MDL. 2680C ENGINE LATHE GARDNER DENVER SCREW-TYPE AIR COMPRESSOR

GARDNER DENVER DRYER

BULLARD 86" DYN-AU-TAPE CNC VERT. BORING MILL

FEMCO MDL. BMC-110R2 CNC HORIZ. BORING MILL (S/N B765382)

O-M LTD MDL. TM2-20N CNC VERT. BORING MILL

FEMCO MDL. BMC-110R2 CNC HORIZ. BORING MILL (S/N B765383)

CNCCNC

CNC CNC

CNC HORIZONTAL MACHINING CENTERDAEWOO MDL. ACE-B130, Fanuc Series 16-M CNC control, 5.12" spndl., 71-3/4" x 63" built-in rotary tbl., 33,000-lb. load, .001 deg. indexing, 118" X-, 78.74" Y-, 63" Z-, 27.5" W-axis travels, CAT-50 spndl. taper, 2,500 RPM, 35 HP, 40-pos. ATC, S/N N.A. (Note: head is off column, dam-age to it, never fixed it, old parts here, never ordered new parts).

CNC VERTICAL BORING MILLSO-M LTD MDL. TM2-2ON VERTICAL CNC CHUCKER, Fanuc 15-M CNC control, 78.7" 4-jaw tbl. dia., 98.4" turning dia., 33,000-lb. tbl. load, 70.8" max. turning ht., 39.37" ram travel, 5.5–200 RPM, 50 HP, 12-pos. ATC, Product No. MT-952A, S/N MT-1078B.BULLARD 86" DYN-AU-TAPE, Fanuc Oi-TC CNC control, 86" dia. 4-jaw tbl., 98" sw., approx. 120" ht. under rail, approx. 72' vert. ram travel, 1.3–160 RPM, 100 HP motor, 12-pos. ATC, chip con-veyor, Essex Machine Tool rebuild/retrofit in 2008, S/N 33398.

ENGINE LATHESHARP MDL. 268OC, spds.: 15–1,500 RPM, 26" sw. over bed, 80" dist. btwn. centers, (2) steady rests, 16" dia. 4-jaw chuck, faceplate, 3" spndl. hole, 3-jaw chuck, Fagor D.R.O. taper, S/N N.A.

ELECTRIC SCREW-TYPE AIR COMPRESSOR SYSTEM

GARDNER DENVER MDL. EDE95M, 6-D air dryer, oil/water separator, 40/30 HP motor, S/N S213320.

LOCATION B

RETROFIT2008

SALE DATE: BIDS START CLOSING ON THURSDAY, NOVEMBER 3 AT 10:00 A.M.

6 7

CNC SLANT BED LATHEDAEWOO PUMA 15, new 1992, Fanuc O-T CNC control, 31.1" sw. over bed, 62" dist. btwn. centers, 5.2" spndl. bore, 40/50 HP motor, 12-station tool turret, 23" dia. 3-jaw hyd. chuck, steady rest, coolant, chip conveyor, misc. turret tooling, S/N N.A.

CNC LATHEDAEWOO PUMA 12L, new 1990, 22.4" sw. over bed, 40.2" max. length, (2) spndl. spds.: 20–2,500 RPM, 3.5" spndl. bore, 25/30 HP motor, 12" dia. 3-jaw hyd. chuck, chip conveyor, assorted toolholders, S/N 140009.

CNC VERTICAL MACHINING CENTERHAAS MDL. VF-1, new 1994, Haas CNC control, 26" x 14" tbl., CT-40 spndl. taper, 7,500 RPM spndl. spds., 10 HP motor, 20" X-axis travel, 16" Y-axis travel, 20" Z-axis travel, 20-pos. ATC, coolant, 15,920 H.O.M., S/N 2736.

DAEWOO PUMA 15 CNC SLANT BED LATHE

HAAS MDL. VF-1 CNC VERT. MACHINING CENTER BURGELU 2" CYLINDRICAL DIE THREAD ROLLER

SALE DATE: BIDS START

CLOSING ON THURS.,

NOV. 3 AT

10:00 A.M.

CNC

GUTTMAN FRICTION SCREW-TYPE FORGING PRESS

CNC

CNC

CYLINDRICAL DIE THREAD ROLLERSBURGELU 2", dual 7.5 HP motor drives for rollers, 40 T. cap. hyd. pressure to rollers, encap-sulated hyd. tank.BURGELU, 4" cap. cylindrical die thread rolling machine, 20 HP motor for rollers, 40 T. hyd. pressure to rollers, 2.75" dia. die spndl., encapsulated hyd. tank, S/N N.A.

CNC LASERAMADA MDL. LC2415 II, new 1997, 1,500 watt, Fanuc C1500 laser, Fanuc 16L laser, MP1530 sheet loader, Torit dust collector, Koolant Koolers chiller.

SEAM WELDERJETLINE MDL. LWS84Z, 84" welding length, 6-7/8"–32" part dia. cap., Jetline Mdl. 9026 carriage control, variable spd. carriage, S/N 890370.

FRICTION SCREW-TYPE FORGING PRESSES(3) GUTMANN FORGING PRESSES, 80 T., 100 T., and 150 T. w/induction heating system.

INDUCTION HEATING UNITS(3) JAMO MDL. JMMF, new 2011, 100 kW, feeding unit, 2-1/2" bar cap. in 40"L. chamber w/auto. loading and feeding.

CNC CUTTING MACHINEWALMAR S.R.L. 5' X 10' MDL. WM1500X3000 CNC CUTTING MACHINE, 5' x 10' cutting cap., Burny 1250+ control, (2) oxy-fuel cutting torches, S/N N.A.

CNC PLASMA CUTTERVANGUARD 5' X 10' MDL. PM510 CNC PLASMA CUTTING MACHINE, 5' x 10' cutting cap., single plasma torch, Thermadyne Cutmaster A120 power supply w/Mdl. 8604B dust collector, S/N N.A.

WATERJET CUTTERDARDI MDL. DWJ2020-FB, new 2012, 78" x 78" X/Y cutting cap., 5.9" vert. cutting head travel, ±0.0039" cutting accuracy, 0.00098" repeatability, 197 IPM rapid traverse, Fagor CNC control, S/N 120152.

LOCATION CBOLT AND GASKET MANUFACTURER–

PLANT CONSOLIDATIONRelocated for convenience of sale to:

3603 Melva Street, Houston, Texas 77020



6 7

AMADA MDL. LC2415 II LASERTEXTO MDL. 299 MANUAL CIRCLE SHEAR

HALMEC MDL. HP88 WRAPPING MACHINE

JETLINE SEAM WELDER

JINAN 100 T. CAP. CNC TENSILE TESTER

TABLE-MOUNTED SWEDGING MACHINE

USMC MDL. A CLICKER PRESS

<STUDMASTER BOLT AND STUD CHAMFERING MACHINE

CLICKER PRESSUSMC HYTRONIC MDL. A, 19" x 40" tbl., 24" x 20" ram, S/N N.A.

CENTERLESS GRINDERBONELI 3" CAP. CENTERLESS GRINDER, 20" x 10" wide grinding wheel, 25 HP, 14" x 10" regulat-ing wheel w/15 HP variable spd. 0–1,000 RPM.

SWEDGING MACHINESCUSTOM 3", tbl. mtd., Enerpac pwr. supply.CUSTOM, (2) stations: 1-1/2" and 2" cap., Enerpac pwr. supply.

SPOT WELDERTECNA MDL. 4608NA ROCKER ARM-TYPE, 50 KVA, TE90 control, S/N N.A.

WET-TYPE BELT SANDERCOSTA 42" MDL. CCV-1100, new 2006, 42" width cap., (2) belts, 44.5" x 103.2" belt size, 480 v./ 3 PH/60 Hz, infeed and outfeed tables.

WRAPPING MACHINEHALMEC MDL. HP88 60" TABLE DIA., 78" vert. travel of film cartridge, 20" film width cap., digital display, manual and auto. modes, pallet ht. sensor, 220 v./1 PH/60 Hz power, S/N 01119.

NIBBLERFENWAY G.V. (SWEDEN) NIBBLER 1250, 49” throat, foot controls, S/N 80011.

CIRCLE SHEARSNIAGARA, 18" throat, air clamp w/outboard.PEXTO MDL. 299 MANUAL CIRCLE SHEAR, 20 gal. mild steel cutting cap., 10" cutting head depth, 30.5" clamping head depth, 3.25"–42.5" sq. blank cap., S/N 8-89.PEXTO MDL. 298-G MANUAL CIRCLE SHEAR, power clamp-ing on outboard, power clamping on feeder, S/N 5-74.LIBERT MDL. HS HIGH-SPEED, 36" throat, air clamp w/outboard.

BOLT & STUD CHAMFERING MACHINE

STUDMASTER, 1/2"–4" cap. 2–1,500 RPM, variable spd., marking and parts counter.

CNC TENSILE TESTERJINAN 100 T. CAP. w/control unit.

SCREW-TYPE AIR COMPRESSOR

ATLAS COPCO MDL. GX5 FF, new 2012, 7.5 HP, S/N CAI557543.

ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR

ONLINE BIDDING AT THIS AUCTION. Go to www.pmi-auction.com

and click on


CNCLOCATION C

CNC

8 9

GIDDINGS & LEWIS FRASER 4" MDL. 340T HORIZ. BORING MILL

BULLARD DYNAMILL 4" HORIZ. BORING MILL

MONARCH H.D. 36" X 72" ENGINE LATHE

AMERICAN PACEMAKER H.D. 28"X 48" ENGINE LATHE

GIDDINGS & LEWIS 4" MDL. 70-E4-T HORIZ. BORING MILL

GIDDINGS & LEWIS KAUKAUNA 42" MDL. 42R VERT. TURRET LATHE

HORIZONTAL BORING MILLSBULLARD DYNAMILL 4", 48" x 72" tbl., 50" vert. travel, pendant control, S/N 31594.

GIDDINGS & LEWIS 4" MDL. 70-E4-T, new 1968, 36" x 74" tbl., 72" vert. travel, 1,300 RPM, pendant control, hard ways, outriggers, S/N 400-149-68.

GIDDINGS & LEWIS FRASER 4" MDL. 340T, new 1962, 36" x 74" tbl., 36" vert. travel, 1,300 RPM, 20 HP, Newal DRO, S/N 150-645-62.

GIDDINGS & LEWIS 4" HYBORMILL MDL. 65T4, new 1965, 36" x 7" tbl., 46.5" vert. travel, pendent control, 1,300 RPM, Newall DRO, S/N 150-744-65.

MILLING MACHINECINCINNATI UNIVERSAL NO. 4, Independent motorized overarm w/swivel head, 18" x 80" swiveling tbl., S/N 4J4U1Z-4. (out of service).

VERTICAL TURRET LATHEGIDDINGS & LEWIS KAUKAUNA 42" MDL. 42R, 42" 4-jaw chuck w/built-in master jaws, 5-sided turret head, side head, 40" under rail, pendant control, 50 HP w/PLC control.

ENGINE LATHESMONARCH H.D. 36" X 72", 20" 4-jaw chuck, 303 RPM, taper attachment, S/N NLL3385.

AMERICAN PACEMAKER H.D. 28" X 48", new 1953, 18' 4-jaw chuck, 1,600 RPM, 20 HP, hard ways, coolant, S/N 73932-53.

LODGE & SHIPLEY H.D. 20" X 120", rebuilt 1981, 20" 4-jaw chuck, 500 RPM, taper attachment, hard ways, S/N 39401.

CDS 20" X 80" LATHE MDL. 206G W/REMOVEABLE GAP, 4”spindle bore, 12-1/2" 4-jaw chuck, 1,700 RPM, inch/mm threading, rapid traverse, 10 HP, S/N F1661.

AMERICAN PACEMAKER H.D. 20" X 48", 12" 4-jaw chuck, 1,500 RPM, steady rest, hard ways, S/N 643-47-42.

JET 16" X 60" LATHE, Mdl. GH1660ZX, new 2008 removable gap, 16" 4-jaw chuck, inch/mm threading, splash guard, S/N 050611ZX966.

CNC CHUCKER LATHEWARNER & SWASEY 2SC, Mdl. M-5000 renewment, remanufactured 1989, GN/Fanuc 10T CNC control, 10" 3-jaw hydraulic chuck, 12-pos. turret.

LOCATION DG&G MACHINE & MAINTENANCE

1801 N. Wayside Drive, Houston, Texas 77020


CDS 20" X 80" ENGINE LATHE


SALE DATE: BIDS START CLOSING ON THURSDAY, NOVEMBER 3

AT 10:00 A.M.

8 9

GIDDINGS & LEWIS 4" HYBORMILL HORIZ. BORING MILL JET 16" X 60" ENGINE LATHE

HYDRAULIC SURFACE GRINDER

THOMPSON 36" X 264", 36" x 264" T-slotted work surface, 72" max. part ht., 16" x 6" wide wheel w/built-in wheel dresser, (4) electromagnetic chucks, pendant control, Neutrol.

RADIAL ARM DRILLCINCINNATI BICKFORD SUPER SERVICE 5' X 15", 7" max. from T-slotted base to quill, power elevation and clamping, S/N 24497.

VERTICAL MACHINING CENTER

BRIDGEPORT INTERACT INT412V, new 1988, 33" x 12" T-slotted tbl., 16" vert. travel, 12-pos. ATC, 5.5 kW, S/N 75291A.

VERTICAL MILLACER ULTIMA 10" X 50" MDL. 3V-KH, new 1996, 3 HP variable spd. head, S/N 96050445.

OBI PUNCH PRESSVERSON NO. 6, 60 T. cap., 12" shut ht., 3" adjustment, 17" x 25-1/2" platen, dual palm buttons, S/N 10422.

BANDSAWSDOALL CONTOUR MDL. 26, 30" x 30" tilting tbl., 2,000 SFM, variable spds. in (2) ranges.MARVEL NO. 8, 18" throat, 3-spd. flat belt drive.

THOMPSON 36" X 264" HYD. SURFACE GRINDERCINCINNATI UNIVERSAL NO. 4 MILLING MACHINE

CINCINNATI BICKFORD 5' X 15" RADIAL ARM DRILL

BRIDGEPORT INTERACT INT412V VERT. MACHINING CENTER

WARNER & SWASEY 2SC CNC CHUCKER LATHE

ACER ULTIMA 10" X 50" VERT. MILL

DOALL CONTOUR MDL. 26 BANDSAW

VERSON 60 T. CAP. OBI PUNCH PRESS

LOCATION D

2008 CNC

LARGECAPACITY

10 11

CNC TURRET PUNCHTRUMPF 25 T. CAP. MDL. TRUMATIC 500 ROTATION, new 1998, Bosch CNC control, 5' x 10' sheet cap., extensive tooling.

BENDING/FOLDING SYSTEM

RAS GIGABEND MDL. 7630, new 2006, 1/4" x 125" cap., 61" rectangular backgauge depth, 161" “U” shape backgauge depth, .004" backgauge accuracy, 130 T. clamp pressure, RAS touch screen control, exten-sive tooling.

HYDRAULIC SHEARACCURSHEAR 12' X 1/4" MDL. 625012, new 7/1998, digital backgauge, L.H. squaring arm.

HYDRAULIC PRESSBRAKE

ACCURPRESS 150 T. CAP. MDL. 07015012, Hurco Autobend 6 control, 12' bed length, tooling, S/N 105.

SLITTING MACHINEVOSS MANUFACTURING 12" X ¼" SLITTING MACHINE.

<ACCURPRESS 150 T. CAP. CNC HYD. PRESSBRAKE

<IHEI GAS FIRED BATCH CORE OVEN

LOCATION EHART RADIATOR8850 N. Loop East

Houston, Texas 77029INSPECTION: Wednesday, November 2,

9:00 A.M. to 4:00 P.M.

CNC

2006

VERTICAL MACHINING CENTERS(2) HURCO MDL. BMC30, #40 taper, Hurco dual screen controls.

CORE BAKE OVENIHEI GAS FIRED BATCH CORE BAKE OVEN, max. work opening: 72" wide x 30" tall, max. core length: 72", 800 degree, auto. door, power loading tbl., Honeywell temperature controls, 12,000 CFM circulating fan, 1,000 CFM exhaust fan. incl. set of stainless steel lifting tongs, Mfg: IHEI Indus-trial Heat Enterprises International, S/N 4667.

RADIATOR HEADER PROCESSING OVEN

HART HEAT MFG. RADIATOR HEAD-ER PROCESSING OVEN, gas fire w/24" x 72" processing cabinet, Honeywell temperature controls, 1998.

ASSEMBLY TABLES(4) FIN ASSEMBLY TBLS. UP TO 72", 9 and 13 fins per inch.

MISC. SHOP & WAREHOUSE EQUIP.

ANVER SHEET LIFTER, STEEL TBLS., RADIATOR MANUFACTURING MATE-RIALS (brass, copper, tin, etc.).

CNC

10 11

LARGE CAP. HEADSTOCK/TAILSTOCK SYSTEM

RANSOME MDL. 300P 30,000-LB. CAP. WELDING POSITIONER

TEREX FANTUZZI 77,000-LB. CAP. SIDELOADER

PARTIAL VIEW OF LINCOLN WELDING POWER SOURCES

SAMPLE VIEW OF MANIPULATORS

On-Site Bidding in Baytown, Texas or Bid Via Webcast at

DON’T MISS OUR UPCOMING LIVE ON-SITE & WEBCAST AUCTION!

Surplus equipment from (4) NOV plants consolidated into:

NATIONAL OILWELL VARCO

4123 Oscar Nelson Jr. DriveBAYTOWN, TEXAS 77523

(See Directions on Back Page)

AUCTION: WEDNESDAY, NOVEMBER 2 • 10:00 A.M.

INSPECTION: Tuesday, November 1, 9:00 A.M. to 4:00 P.M.

& Morning of Sale

BUYER’S PREMIUM: 15% ON-SITE • 18% WEBCAST

2011

(9) Welding Manipulators & (21) Positioners; (15) Tank & Pipe Turning Rolls; (5) Turntables; Huge Qty. LINCOLN & MILLER Welders & Feeds; 70,000-Lb. Cap. TEREX Sideloader; (7) Forklifts up to 15,500-Lb. Cap.; Material Handling Equip.; NDT Inspection Machine;

Plasma Cutters; Vertical Tilt-Frame Bandsaw; Shop Support; More

LIVEAUCTION

QS-0034329

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

MULTI-LOCATION ONLINE ONLY

AUCTION TEXAS & LOUISIANA

Featuring: (10) CNC Horiz. Boring Mills; CNC Machining Center; CNC Vert. Boring Mills;

CNC Vert. Turning Machines, CNC Lathes, Manual Machine Tools, Laser, CNC Bending/

Folding System, CNC Hyd. Pressbrake, Fabrication Equipment, Forklifts,

Much, Much More!

HOUMA, LOUISIANA, HOUSTON & CYPRESS, TEXAS

ONLINE AUCTION

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

GO TO OUR WEBSITE CALENDAR AT WWW.PMI-AUCTION.COM FOR THE LINK TO THE BIDSPOTTER CATALOG.

TERMS & CONDITIONS OF ON-LINE AUCTION SALEAn 18% Buyer’s Premium will apply.A 100% refundable $3,000 (US bidders) or $10,000 (foreign bidders) deposit is required for all webcast bidding unless prior approval has been obtained from the auction company.ALL BIDS ARE MADE AND RECEIVED UNDER THE TERMS HEREINAFTER SET FORTH TO WHICH TERMS BIDDERS AGREE BY MAKING THEIR BID AT THE SALE. THESE TERMS CANNOT BE ALTERED EXCEPT BY THE AUCTIONEER. NO EMPLOYEE HAS AUTHORITY TO MODIFY SAME. THE OWNER AND/OR AUCTIONEER RESERVE THE RIGHT TO ADD TO OR MODIFY THE TERMS OF THE SALES.All payments must be made by Cash, Cashier’s Check, Wire Transfer or Company Check with Bank Letter of Guarantee to Plant & Machinery, Inc. (PMI). Here is an example of what your letter should be: [Mr. “Customer Name” representing “Company Name” is a customer of this bank. This bank will guarantee unqualified payment to Plant & Machinery, Inc. on the account listed herein up to the amount of $________ . This letter is good until December 5, 2016]All bidders are required to give full name, company name, address, phone, fax, email address, and bank information when registering. All bidders must register before bidding.All bids must be paid in full within two business days after the bids have closed. The Auctioneer shall determine the bidding increments. Some items may be auctioned with reserve.All purchases must be removed within two weeks after the bids have closed, or, within the timeframe posted on the sale web page. No lot can, on any account, be removed prior to PMI having been paid in full. Removal shall be at the expense, risk and liability of the Purchaser. Purchases will be delivered only on presentation of paid bill. Auctioneer shall not be responsible for goods not removed within the aforesaid time.Riggers, movers, electricians or buyer performing work at the Auction Sites must provide Auctioneer with evidence of insurance. The insur-ance coverage must be at a level acceptable to Auctioneer and to the Seller.All checks for deposits and balances due shall be payable to the order of PLANT & MACHINERY, INC. unless instructed otherwise. All bills must be paid to the Houston headquarters offices of the Auctioneer at 1304 Langham Creek Drive, Suite 454, Houston, TX, 77084 or by wire transfer directly to the bank specified in the wire transfer instructions provided for this on-line auction. The full purchase price on all lots sold to the same buyer must be paid within the time fixed and before removal of any of the goods.

THE AUCTIONEER SHALL NOT BE RESPONSIBLE FOR THE CORRECT DESCRIPTION, GENUINENESS, AUTHENTICITY OF, OR DEFECT IN ANY LOT, AND MAKES NO WARRANTY IN CONNECTION THEREWITH. NO SALE SHALL BE SET ASIDE NOR ALLOWANCE MADE ON ACCOUNT OF ANY INCORRECTNESS, ERROR IN CATALOGING, OR ANY IMPERFECTION NOT NOTED. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD “AS IS” AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED, OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM.Articles purchased may not incorporate approved activating mecha-nisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is Purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other require-ments before placing such articles into operation.Purchaser agrees to indemnify and hold Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses aris-ing therefrom.No claims will be allowed after removal of goods from premises.Auctioneer shall not, in any event, be liable for non-delivery or any other matter or thing, to any Purchaser of any lot other than for the return to the Purchaser of the deposit or sum paid on said lot, should the Purchaser be entitled thereto.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated dam-ages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting Purchaser.Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefor. Neither the Auctioneer nor his principal shall be liable by reason of defect in or condition of the premises on which the sale is held.The Auctioneer reserves the right to withdraw from sale any of the prop-erty listed or to sell at this sale property not listed, and also reserves the

right to group one or more lots into one or more selling lots or to subdi-vide into two or more selling lots. Whenever the best interest of a Seller will be served, the Auctioneer reserves the right to sell all the property listed, in bulk.Where items are sold by estimated weight, count or measure, the Purchaser will be billed for and required to pay for the estimated weight, count or measure. If, upon delivery, any shortage exists, the Purchaser will receive a refund at the rate of purchase. If there be an excess, the Purchaser will be required to pay for such excess, at the rate of purchase.Reserve: There are RESERVE amounts attached to selected items in this auction. When bidding, you will be notified by the online bidding system as to whether or not you have met the RESERVE amount. No bid will be considered a winning bid unless the RESERVE amount has been met. A bid in the amount of the RESERVE, or higher, will be con-sidered a winning bid. Please check your bid and bid status before the Lot closes.The Auctioneer reserves the right to reject any and all bids, alter the order of sale, and accept bids made on behalf of the Seller.The record of sale kept by the Auctioneer will be taken as final in the event of any dispute.The Auctioneer is acting as agent only and is not responsible for the acts of its principals. Purchaser acknowledges, as an inducement to Seller to commit Purchaser to bid, that Purchaser has independently inspected the goods bid upon by the Purchaser, and acknowledges to the Seller that Purchaser is acquiring all goods “AS IS, WITH ALL FAULTS” and “WITH REMOVAL AT PURCHASERS’ RISK AND EXPENSE” and agrees to protect, indemnify and hold harmless the Seller from any and all claims, demands, causes of actions, liabilities and judgments relating to the conditions or use of the goods.Seller, if not the same as the Auctioneer, shall have the rights, protec-tions and benefits afforded to the Auctioneer as set forth herein.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancel-lation or postponement. Kindly contact auctioneer prior to attendance.ANY ADDITIONAL PROVISIONS OR AMENDMENTS TO THE ABOVE LISTED TERMS WILL BE POSTED TO THE ON-LINE SALE WEB PAGE BY THE AUCTIONEER PRIOR TO THE START OF BIDDING.

SALE DATE: BIDS START CLOSING ON THURSDAY, NOVEMBER 3

AT 10:00 A.M.

Documents

MULTI-LOCATION ONLINE ONLY AUCTION • TEXAS & LOUISIANA