AgendaMSMM WCDMA-GSM 900 MSMM LTE-GSM 1800Process

6+6+6 Actual Configuration

6+6+6 Target Configuration

Sector connectionsDATA 2 to DUGDATA 1 to DUW

TMA, RET Connections

DUG Master IDB Configuration

DUG Master IDB Configuration

DUG Master GPS Configure

DUG Slave IDB configuration

DUG Slave IDB configuration

TMA Configuration

MSMM LTE GSM Configuration

MSMM LTE GSM Configuration

GPS Configuration

TMA Configuration

Target

Installation & Config Process1- Check available Tools : Before MDT- OMT R52E2- Check Available HW : Before MDT1 DUW/DUS with CPRI cable ( 3 if 3 Sectors)Add 3 RUS 1800 in case of MSMM LTE-GSM1 ESB cable for TG Synch for W-G 900GPS Out Cable RPM 777 382TMA and RET for each Sector

Installation & Config Process3- Inspect Existing Installation Before MDTIf lightning Arrester is installed it needs to be dismantled otherwise TMA will not properly workCheck if Analog cross connect exists and properly connected between RUS of the same Sector (RXA->RXB)

Installation & Config Process2- Installation : Before MDTInstall the DUW/DUSInstall the TMA, RET without connecting to Sector

Installation & Config Process3- 2G Reconfiguration : During MDTConnect CPRI cable as per Target configurationGPS out connectionESB cable connection in case of W-G 900Reconfigure IDBConnect RET and TMA, after definition from DUW/DUS

EXERCISEWe have 6+6+6+6 ( 4 Sector), we want to achive the same config by adding WCDMA 1+1+1+1 Only DUG Master is synchronized through GPS out

Exercise Correction DUG Master

Exercise Correction DUG SLAVE