214
Disclaimer: The result published at www.murugappapoly.ac.in is provisional only. We are not responsible for any inadvertent error that may have crept in the data / results being published on the Internet. This is being published on the Internet just for immediate information to the examinees. The Final Mark Sheets issued by the polytechnic college should only be treated authentic & final in this regard. 

MPC-Autonomous Examinations Results - October 2013

Embed Size (px)

Citation preview

Page 1: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 1/214

Disclaimer: The result published at www.murugappapoly.ac.in is provisional

only. We are not responsible for any inadvertent error that may have crept in the

data / results being published on the Internet. This is being published on the

Internet just for immediate information to the examinees. The Final Mark Sheetsissued by the polytechnic college should only be treated authentic & final in this

regard.

Page 2: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 2/214

Page 3: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 3/214

Page 4: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 4/214

Page 5: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 5/214

Page 6: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 6/214

Page 7: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 7/214

Page 8: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 8/214

Page 9: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 9/214

Page 10: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 10/214

Page 11: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 11/214

Page 12: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 12/214

Page 13: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 13/214

Page 14: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 14/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

(REGULATION 2012)RESULTS FOR I SEMESTER ELECTRICAL & ELECTRONICS ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------

SUBJECT CODE : GEL11 GEL12 GEL13 GEL14 GEL15 GEL16 GEL17 GEL18 GEL19 TOTAL RESULTSNO. REG_NO. NAME------------------------------------------------------------------------------------------------------------------------

41 2139203 VIGNESH.P 55 72 74 65 49 91 69 63 61 599 PASS

42 2139204 P.VISHWANTH 59 43 68 44 27 66 74 50 57 488 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GEL11 Communication Skills in English GEL12 Engineering Mathematics-IGEL13 Engineering Mathematics-II GEL14 Engineering Physics-IGEL15 Engineering Chemistry-I GEL16 Engineering Physics-I PracticalGEL17 Engineering Chemistry-I Practical GEL18 Engineering Graphics-I PracticalGEL19 Computer Applications Practical

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 15: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 15/214

Page 16: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 16/214

Page 17: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 17/214

Page 18: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 18/214

Page 19: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 19/214

Page 20: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 20/214

Page 21: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 21/214

Page 22: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 22/214

Page 23: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 23/214

Page 24: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 24/214

Page 25: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 25/214

Page 26: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 26/214

Page 27: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 27/214

Page 28: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 28/214

Page 29: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 29/214

Page 30: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 30/214

Page 31: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 31/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

(REGULATION 2012)RESULTS FOR I SEMESTER MECHANICAL ENGG. (TOOL & DIE ) (SANDWICH)

------------------------------------------------------------------------------------------------------------------------SUBJECT CODE : GEL11 GEL12 GEL13 GEL14 GEL15 GEL16 GEL17 GEL18 GEL19 TOTAL RESULT

SNO. REG_NO. NAME------------------------------------------------------------------------------------------------------------------------

41 2139465 YUVARAJ.S 61 54 55 61 47 80 88 86 93 625 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GEL11 Communication Skills in English GEL12 Engineering Mathematics-IGEL13 Engineering Mathematics-II GEL14 Engineering Physics-IGEL15 Engineering Chemistry-I GEL16 Engineering Physics-I PracticalGEL17 Engineering Chemistry-I Practical GEL18 Engineering Graphics-I Practical

GEL19 Computer Applications Practical

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 32: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 32/214

Page 33: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 33/214

Page 34: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 34/214

Page 35: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 35/214

Page 36: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 36/214

Page 37: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 37/214

Page 38: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 38/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013(REGULATION 2012)

RESULTS FOR III SEMESTER CIVIL ENGINEERING (LATERAL)

------------------------------------------------------------------------------------------------------------------------SUBJECT CODE : CEL31 CEL32 CEL33 CEL34 CEL35 CEL36 CEL37 TOTAL RESULT

SNO. REG_NO. NAME------------------------------------------------------------------------------------------------------------------------

1 2138980 BALA KRISHNAN.V 52 57 60 86 91 94 89 529 PASS

2 2138981 GUNASEKARAN.V 54 84 80 79 93 77 92 559 PASS

3 2138982 MANJU.V 52 70 61 95 94 89 91 552 PASS

4 2138983 SURESH.P 41 55 29 79 92 76 85 457 FAIL

5 2138984 SUSHMITHA.J 51 71 70 94 97 90 94 567 PASS

6 2138985 VENKATESH.D 63 70 71 80 94 86 94 558 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CEL31 Engineering Mechanics CEL32 Construction Materials and Construction PracticeCEL33 Surveying-I CEL34 Materials Testing PracticalCEL35 CAD in Civil Engineering Drawing-I CEL36 Construction-I PracticalCEL37 Surveying-I Practical

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 39: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 39/214

Page 40: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 40/214

Page 41: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 41/214

Page 42: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 42/214

Page 43: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 43/214

Page 44: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 44/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013( G O 20 2)

Page 45: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 45/214

(REGULATION 2012)RESULTS FOR III SEMESTER CIVIL ENGINEERING (PARTTIME)

------------------------------------------------------------------------------------------------------------------------SUBJECT CODE : CEL31 CEL32 GEL28 GEL29 CEL34 TOTAL RESULT

SNO. REG_NO. NAME

------------------------------------------------------------------------------------------------------------------------21 2128953 SUNDARAMURTHY.M 30 49 57 79 84 299 FAIL

22 2128954 SURESH.M 86 78 79 92 83 418 PASS

23 2128955 SWARNA.G.B 50 62 71 78 86 347 PASS

24 2128956 VADIVELAN.D 37 57 73 74 88 329 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CEL31 Engineering Mechanics CEL32 Construction Materials and Construction PracticeGEL28 Engineering Graphics-II Practical GEL29 Workshop PracticeCEL34 Materials Testing Practical

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 46: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 46/214

Page 47: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 47/214

Page 48: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 48/214

Page 49: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 49/214

Page 50: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 50/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

(REGULATION 2012)RESULTS FOR III SEMESTER COMPUTER ENGINEERING (LATERAL)

------------------------------------------------------------------------------------------------------------------------SUBJECT CODE : CSL31 CSL32 CSL33 CSL34 CSL35 CSL36 CSL37 TOTAL RESULT

SNO. REG_NO. NAME------------------------------------------------------------------------------------------------------------------------

1 2138986 DEEPAN.M 60 66 56 92 89 58 89 510 PASS

2 2138987 JOSEPH.S 64 74 58 81 90 60 89 516 PASS

3 2138988 SURESH.V 65 54 50 87 91 59 92 498 PASS

4 2138989 TAJ NISHA.A 90 98 85 99 95 78 99 644 PASS

5 2138990 VINODHINI.K 75 79 59 93 91 82 94 573 PASS

6 2138991 VISHALI.R 81 76 75 96 97 76 98 599 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CSL31 Basics of Electronics and Microprocessor CSL32 Operating System ConceptsCSL33 Programming in 'C' and Data Structures CSL34 Electronic Circuits PracticalCSL35 Programming in 'C' Practical CSL36 Data Structures PracticalCSL37 Multimedia System Practical

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS OCTOBER 2013

Page 51: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 51/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013(REGULATION 2012)

RESULTS FOR II SEMESTER ELECTRICAL & ELECTRONICS ENGG. (REGULAR)

------------------------------------------------------------------------------------------------------------------------

SUBJECT CODE : GEL21 GEL22 GEL23 GEL24 GEL25 GEL26 GEL27 GEL28 GEL29 TOTAL RESULTSNO. REG_NO. NAME------------------------------------------------------------------------------------------------------------------------

1 2128642 LITHYA.G - - - - 25 - - - - 25 FAIL

2 2128643 LOKESH.M - - - - 18 - - - - 18 FAIL

3 2128651 PRASANTH.N - - - 23 33 - - - - 56 FAIL

4 2128653 RIZWAN.H - - - 33 - - 78 - - 111 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GEL21 Communication Skills in English Practical GEL22 Engineering Mathematics-IIIGEL23 Engineering Mathematics-IV GEL24 Engineering Physics-IIGEL25 Engineering Chemistry-II GEL26 Engineering Physics-II PracticalGEL27 Engineering Chemistry-II Practical GEL28 Engineering Graphics-II PracticalGEL29 Workshop Practice

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 52: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 52/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013(REGULATION 2012)

RESULTS FOR III SEMESTER ELECTRICAL & ELECTRONICS ENGG. (REGULAR)

Page 53: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 53/214

RESULTS FOR III SEMESTER ELECTRICAL & ELECTRONICS ENGG. (REGULAR)

------------------------------------------------------------------------------------------------------------------------SUBJECT CODE : EEL31 EEL32 EEL33 EEL34 EEL35 EEL36 EEL37 TOTAL RESULT

SNO. REG_NO. NAME

------------------------------------------------------------------------------------------------------------------------21 2128654 SANKAR.K 17 12 15 68 60 67 81 320 FAIL

22 2128655 SELVARAJ.E 50 63 63 84 85 71 89 505 PASS

23 2128656 SYED SIRAJUDEEN.K 55 76 71 86 81 88 85 542 PASS

24 2128657 UDAYAKUMAR.T 66 71 59 89 88 90 88 551 PASS

25 2128658 VIGNESH.N 76 86 78 87 86 73 88 574 PASS

26 2128659 VIGNESHWARAN.G 60 79 71 87 91 89 89 566 PASS

27 2128660 YOKESH.S 57 65 70 81 89 92 86 540 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EEL31 Electrical Circuit Theory-I EEL32 Electrical Machines-IEEL33 Analog Electronics EEL34 Electrical Circuits and Machines PracticalEEL35 Analog Electronics Practical EEL36 Programming in C & Computer Networking PracticalEEL37 Mechanical Workshop Practice

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 54: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 54/214

Page 55: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 55/214

Page 56: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 56/214

Page 57: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 57/214

Page 58: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 58/214

Page 59: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 59/214

Page 60: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 60/214

Page 61: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 61/214

Page 62: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 62/214

Page 63: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 63/214

Page 64: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 64/214

Page 65: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 65/214

Page 66: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 66/214

Page 67: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 67/214

Page 68: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 68/214

Page 69: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 69/214

Page 70: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 70/214

Page 71: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 71/214

Page 72: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 72/214

Page 73: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 73/214

Page 74: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 74/214

Page 75: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 75/214

Page 76: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 76/214

Page 77: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 77/214

Page 78: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 78/214

Page 79: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 79/214

Page 80: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 80/214

Page 81: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 81/214

Page 82: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 82/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER CIVIL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE12 GE13 GE14 GE15 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 4 7 3 3

Page 83: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 83/214

------------------------------------------------------------------------------------------------------------------------1 2107524 KAMALESH KUMAR.R - - - 26 - 26 FAIL

2 2107531 PRATHAP KUMAR.D - - - 20 - 20 FAIL

3 2117977 MADHAVAN.V - - 36 - - 36 FAIL

4 2117983 PRAVEENKUMAR.R - - 27 - - 27 FAIL

5 2117993 THAMIZHARASAN.K - - 39 - - 39 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE12 INTRODUCTION TO COMPUTERS-IGE13 MATHEMATICS GE14 ENGINEERING PHYSICS-IGE15 ENGINEERING CHEMISTRY-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR II SEMESTER CIVIL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE21 GE22 GE23 GE24 GE25 GE26 GE27 GE28 GE29 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 2 4 7 3 3 1 1 4 2

Page 84: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 84/214

------------------------------------------------------------------------------------------------------------------------1 2107531 PRATHAP KUMAR.D - 15 - - - - - - - 15 FAIL

2 2117983 PRAVEENKUMAR.R - 16 7 - 10 - - - - 33 FAIL

3 2117993 THAMIZHARASAN.K - - 9 - - - - - - 9 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE21 COMMUNICATION SKILLS IN ENGLISH PRACTICAL GE22 INTRODUCTION TO COMPUTERS-IIGE23 APPLIED MATHEMATICS GE24 ENGINEERING PHYSICS-II

GE25 ENGINEERING CHEMISTRY-II GE26 ENGINEERING PHYSICS PRACTICALGE27 ENGINEERING CHEMISTRY PRACTICAL GE28 ENGINEERING GRAPHICS-CADGE29 WORKSHOP PRACTICE

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER CIVIL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CE41 CE42 CE43 CE44 CE45 CE46 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 4 2 3

Page 85: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 85/214

------------------------------------------------------------------------------------------------------------------------1 2107515 BALAJI.R 45 - - - - - 45 PASS

2 2107518 DINESH KUMAR.A 62 - - - - - 62 PASS

3 2107524 KAMALESH KUMAR.R 60 - - - - - 60 PASS

4 2107531 PRATHAP KUMAR.D - - 59 - - - 59 PASS

5 2117977 MADHAVAN.V 72 - - - - - 72 PASS

6 2117983 PRAVEENKUMAR.R - 20 - - - - 20 FAIL

7 2117984 RAHUL.T - 31 - - - - 31 FAIL

8 2117993 THAMIZHARASAN.K 71 18 - - - - 89 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CE41 THEORY OF STRUCTURES CE42 HYDRAULICSCE43 ADVANCED SURVEYING CE44 CAD IN CIVIL ENGINEERING-IICE45 HYDRAULICS AND PLUMBING PRACTICAL CE46 SURVEYING PRACTICAL-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER CIVIL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CE31 CE32 CE33 CE34 CE35 CE36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 4 2 3

Page 86: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 86/214

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CE31 ENGINEERING MECHANICS CE32 CONSTRUCTION MATERIALS AND PRACTICECE33 SURVEYING CE34 CAD IN CIVIL ENGINEERING-ICE35 MATERIAL TESTING PRACTICAL-I CE36 SURVEYING PRACTICAL-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 87: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 87/214

Page 88: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 88/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER CIVIL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE12 GE13 GE14 GE15 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 4 7 3 3------------------------------------------------------------------------------------------------------------------------

1 2107544 ARUN R 26 26 FAIL

Page 89: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 89/214

1 2107544 ARUN.R - - 26 - - 26 FAIL

2 2107547 GANAPATHY.S - - 36 - - 36 FAIL

3 2107564 SASIKUMAR.G - - 20 - - 20 FAIL

4 2118005 KARTHICK.R - 13 15 18 - 46 FAIL

5 2118009 LOKESH.M - - 22 - 13 35 FAIL

6 2118012 MOHAMED ARIFF.M - - 34 - - 34 FAIL

7 2118016 PREMKUMAR.S - - - - 19 19 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE12 INTRODUCTION TO COMPUTERS-IGE13 MATHEMATICS GE14 ENGINEERING PHYSICS-IGE15 ENGINEERING CHEMISTRY-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 90: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 90/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER CIVIL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CE31 CE32 CE33 CE34 CE35 CE36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 4 2 3------------------------------------------------------------------------------------------------------------------------

1 2107544 ARUN.R 13 - - - - - 13 FAIL

Page 91: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 91/214

1 2107544 ARUN.R 13 13 FAIL

2 2118005 KARTHICK.R - 48 - - - - 48 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CE31 ENGINEERING MECHANICS CE32 CONSTRUCTION MATERIALS AND PRACTICECE33 SURVEYING CE34 CAD IN CIVIL ENGINEERING-ICE35 MATERIAL TESTING PRACTICAL-I CE36 SURVEYING PRACTICAL-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER CIVIL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CE42 CE44 CE45 CE47 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 4 2 10------------------------------------------------------------------------------------------------------------------------

1 2107567 SRINATH.R 14 - - - 14 FAIL

Page 92: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 92/214

2 2118005 KARTHICK.R 15 - - - 15 FAIL

3 2118006 KUMAR.M 10 - - - 10 FAIL

4 2118009 LOKESH.M 12 - - - 12 FAIL

5 2118010 MANIVANNAN.G 26 - - - 26 FAIL

6 2118011 MEENU.R.S. 36 - - - 36 FAIL

7 2118012 MOHAMED ARIFF.M 27 - - - 27 FAIL

8 2118016 PREMKUMAR.S 8 - - - 8 FAIL

9 2118022 SATHYAMOORTHY.D 33 - - - 33 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CE42 HYDRAULICS CE44 CAD IN CIVIL ENGINEERING-IICE45 HYDRAULICS AND PLUMBING PRACTICAL CE47 INDUSTRIAL TRAINING-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 93: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 93/214

Page 94: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 94/214

Page 95: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 95/214

Page 96: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 96/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VII SEMESTER CIVIL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CE61 CE65 CE67 CE71 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 2 3 10------------------------------------------------------------------------------------------------------------------------

21 2107565 SATHISH KUMAR.M 74 89 77 97 337 I

22 2107566 SIVA KUMAR.S 99 93 86 98 376 D

Page 97: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 97/214

23 2107567 SRINATH.R 79 91 89 93 352 W

24 2107568 THIRUMURUGAN.G 72 83 79 97 331 I

25 2107569 VENKATA NARESH.K 91 92 85 93 361 D

26 2107570 VIGNESH.R 81 94 76 98 349 D

27 2107571 YOGALAKSHMI.R 91 90 74 90 345 I

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

CE61 CONSTRUCTION MANAGEMENT CE65 CONSTRUCTION PRACTICAL-IICE67 PROJECT WORK CE71 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 98: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 98/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER COMPUTER ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE12 GE13 GE14 GE15 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 4 7 3 3------------------------------------------------------------------------------------------------------------------------

21 2118067 REKHA.D - - 46 - - 46 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

( ) ( ) ( d )

Page 99: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 99/214

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE12 INTRODUCTION TO COMPUTERS-IGE13 MATHEMATICS GE14 ENGINEERING PHYSICS-IGE15 ENGINEERING CHEMISTRY-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 100: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 100/214

Page 101: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 101/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR IV SEMESTER COMPUTER ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CS41 CS42 CS43 CS44 CS45 CS46 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 5 6 3 3 3

------------------------------------------------------------------------------------------------------------------------1 2097147 SAI KRISHNA.D - 15 - - - - 15 FAIL

Page 102: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 102/214

2 2107605 PRASANTH.S 13 - 10 - - - 23 FAIL

3 2118028 ABDUL RAHMAN.M - - 20 - - - 20 FAIL

4 2118030 ASHWIN KUMAR.S 12 13 11 - - - 36 FAIL

5 2118080 TEJASWANI.Y - 43 - - - - 43 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CS41 MICROCONTROLLER AND EMBEDDED SYSTEM CS42 COMPUTER NETWORKS AND SECURITYCS43 OBJECT ORIENTED PROGRAMMING CS44 MICROCONTROLLER AND EMBEDDED SYSTEM PRACTICALCS45 COMPUTER NETWORKS AND SECURITY PRACTICAL CS46 OBJECT ORIENTED PROGRAMMING PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 103: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 103/214

Page 104: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 104/214

Page 105: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 105/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR V SEMESTER COMPUTER ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CS51 CS52 CS53 CS54 CS55 CS56 GE57 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 4 5 3 2 3 2------------------------------------------------------------------------------------------------------------------------

61 2118086 YUVARAJ.R 81 70 77 91 85 98 77 579 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind Trg / TCS)

Page 106: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 106/214

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CS51 COMPUTER HARDWARE AND MAINTENANCE CS52 RELATIONAL DATABASE MANAGEMENT SYSTEMCS53 INTERNET AND WEB DESIGNING CS54 COMPUTER HARDWARE AND MAINTENANCE PRACTICALCS55 RELATIONAL DATABASE MANAGEMENT SYSTEM PRACTICAL CS56 INTERNET AND WEB DESIGNING PRATICALGE57 TECHNICAL COMMUNICATION SKILLS PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VI SEMESTER COMPUTER ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 CS61 CS62 CS63 CS64 CS65 CS66 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 5 4 2 3 2 3------------------------------------------------------------------------------------------------------------------------

1 2097147 SAI KRISHNA.D 10 - 6 - - - - 16 FAIL

2 2107606 PRATHAP KUMAR.N 57 - - - - - - 57 S

Page 107: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 107/214

3 2107607 PRINCE.C 78 - - - - - - 78 S

4 2107615 SANJAY.R 48 - - - - - - 48 S

5 2107616 SANKAR.S 48 - - - - - - 48 S

6 2107629 VINOTHKUMAR.K 49 - - - - - - 49 W

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT CS61 MOBILE COMPUTINGCS62 NETWORK ADMINISTRATION CS63 NETWORK ADMINISTRATION PRACTICALCS64 .NET PROGRAMMING PRACTICAL CS65 MULTIMEDIA SYSTEM PRACTICALCS66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER ELECTRICAL & ELECTRONICS ENGG. (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE12 GE13 GE14 GE15 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 4 7 3 3------------------------------------------------------------------------------------------------------------------------

1 2107632 CHANDRAMOHAN.C - - 67 - - 67 PASS

2 2107639 KAVIYARASAN.L - - 38 - - 38 FAIL

Page 108: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 108/214

3 2107644 RAJESH.E - - 51 - - 51 PASS

4 2107648 SATHISH.G - - 82 - - 82 PASS

5 2107656 VINOTH.D - - 21 26 15 62 FAIL

6 2107657 YUVARAJ.A - - 14 15 - 29 FAIL

7 2118107 SARAVANAN.S - - 13 - - 13 FAIL

8 2118109 SIVA.R - - 10 12 - 22 FAIL

9 2118113 SURYA.D - 43 - - - 43 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE12 INTRODUCTION TO COMPUTERS-IGE13 MATHEMATICS GE14 ENGINEERING PHYSICS-IGE15 ENGINEERING CHEMISTRY-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 109: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 109/214

Page 110: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 110/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR III SEMESTER ELECTRICAL & ELECTRONICS ENGG. (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE31 EE32 EE33 EE34 EE35 EE36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 3 3 2------------------------------------------------------------------------------------------------------------------------

21 2118114 VIGNESH KUMAR.S 34 - - - - - 34 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

Page 111: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 111/214

EE31 ELECTRICAL CIRCUT THEORY EE32 ELECTRICAL MACHINES-IEE33 ANALOG ELECTRONICS EE34 ELECTRICAL CIRCUITS AND MACHINES PRACTICALEE35 ANALOG ELECTRONICS PRACTICAL EE36 VISUAL PROGRAMMING PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER ELECTRICAL & ELECTRONICS ENGG. (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE41 EE42 EE43 EE44 EE45 EE46 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 3 3 2------------------------------------------------------------------------------------------------------------------------

1 2107631 BALAJI.M - 17 - - - - 17 FAIL

2 2107657 YUVARAJ.A - - 12 - - - 12 FAIL

3 2118087 AMEEN S 76 77 60 93 92 93 491 PASS

Page 112: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 112/214

3 2118087 AMEEN.S 76 77 60 93 92 93 491 PASS

4 2118103 RAJESHKUMAR.R - 62 41 - - - 103 PASS

5 2118109 SIVA.R - - 12 - - - 12 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EE41 ELECTRICAL MACHINES-II EE42 MEASUREMENTS AND INSTRUMENTATIONEE43 DIGITAL ELECTRONICS AND MICROPROCESSOR EE44 ELECTRICAL MACHINES AND INSTRUMENTATION PRACTICALEE45 DIGITAL ELECTRONICS AND MICROPROCESSOR PRACTICAL EE46 MECHANICAL WORKSHOP PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 113: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 113/214

Page 114: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 114/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VI SEMESTER ELECTRICAL & ELECTRONICS ENGG. (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 EE61 EE62 EE63 EE64 EE65 EE66 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 4 5 3 2 2 3

------------------------------------------------------------------------------------------------------------------------1 2107631 BALAJI.M 11 - - - - - - 11 FAIL

2 2107632 CHANDRAMOHAN.C 60 - - - - - - 60 S

Page 115: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 115/214

3 2107634 GNANA PRAKASH.S 57 - - - - - - 57 S

4 2107656 VINOTH.D 27 53 - - - - - 80 FAIL

5 2107657 YUVARAJ.A - 48 33 - - - - 81 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT EE61 POWER SYSTEM-IIEE62 INDUSTRIAL CONTROLS AND PLC EE63 INDUSTRIAL CONTROLS AND PLC PRACTICALEE64 WIRING, WINDING AND ESTIMATION PRACTICAL EE65 COMPUTER AIDED ELECTRICAL DRAWINGEE66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER ELECTRICAL & ELECTRONICS ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE12 GE13 GE14 GE15 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 4 7 3 3------------------------------------------------------------------------------------------------------------------------

1 2107670 JITHESH KUMAR.M - - 23 22 - 45 FAIL

2 2107674 MANIKANDAN.N - - 39 28 - 67 FAIL

3 2107677 NAVEEN KUMAR.N - - 9 12 - 21 FAIL

Page 116: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 116/214

4 2107678 PRAVEEN.E - 10 13 13 - 36 FAIL

5 2118118 ARJUN.S - - 31 - - 31 FAIL

6 2118130 KISHORE KUMAR.J - - - 32 - 32 FAIL

7 2118134 PRASATH.V - - 11 - - 11 FAIL

8 2118141 VADIVELU.K - - - 7 - 7 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE12 INTRODUCTION TO COMPUTERS-IGE13 MATHEMATICS GE14 ENGINEERING PHYSICS-IGE15 ENGINEERING CHEMISTRY-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 117: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 117/214

Page 118: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 118/214

Page 119: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 119/214

Page 120: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 120/214

Page 121: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 121/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VI SEMESTER ELECTRICAL & ELECTRONICS ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE52 EE53 GE61 EE61 EE55 EE56 GE57 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 5 5 4 3 3 2------------------------------------------------------------------------------------------------------------------------

1 2076284 THENAPPAN.P.L - - 22 - - - - 22 FAIL

2 2107670 JITHESH KUMAR.M 16 16 - 32 - - - 64 FAIL

3 2107671 KALASALINGAM.P - 47 - - - - - 47 PASS

4 2107677 NAVEEN KUMAR N 12 16 26 29 83 FAIL

Page 122: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 122/214

4 2107677 NAVEEN KUMAR.N 12 16 26 29 - - - 83 FAIL

5 2107678 PRAVEEN.E 10 16 16 11 - - - 53 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EE52 MICROCONTROLLER AND EMBEDDED SYSTEM EE53 POWER ELECTRONICS AND DRIVESGE61 INDUSTRIAL ENGINEERING AND MANAGEMENT EE61 POWER SYSTEM-IIEE55 POWER ELECTRONICS AND DRIVES PRACTICAL EE56 MICROCONTROLLER AND EMBEDDED SYSTEM PRACTICALGE57 TECHNICAL COMMUNICATION SKILLS PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 123: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 123/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VII SEMESTER ELECTRICAL & ELECTRONICS ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE62 EE63 EE66 EE71 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 3 3 10------------------------------------------------------------------------------------------------------------------------

21 2107681 RAMESH.G 55 87 80 95 317 D

22 2107682 SARAVANAN.M 49 77 85 87 298 I

23 2107683 SHARMILA.K 76 87 90 93 346 D

24 2107684 SUGANYA.J.K 61 84 94 88 327 D

25 2107685 SUGUMAR.R 50 65 78 90 283 I

Page 124: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 124/214

26 2107687 VIJAYA KUMAR.V 43 60 77 88 268 I

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

EE62 INDUSTRIAL CONTROLS AND PLC EE63 INDUSTRIAL CONTROLS AND PLC PRACTICALEE66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER EE71 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER ELECTRICAL & ELECTRONICS ENGG. (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE13 GE14 GE15 GE21 GE29 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 7 3 3 2 2------------------------------------------------------------------------------------------------------------------------

1 2118383 KALAINATHAN.P - 12 - - - - 12 FAIL

2 2118386 MAGESH.T - 30 - - - - 30 FAIL

3 2118391 PARTHEEBAN.G - 35 - - - - 35 FAIL

4 2118398 SHANMUGA SUNDARAM.A - 6 2 12 - - 20 FAIL

Page 125: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 125/214

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE13 MATHEMATICSGE14 ENGINEERING PHYSICS-I GE15 ENGINEERING CHEMISTRY-IGE21 COMMUNICATION SKILLS IN ENGLISH PRACTICAL GE29 WORKSHOP PRACTICE

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR II SEMESTER ELECTRICAL & ELECTRONICS ENGG. (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE12 GE23 GE24 GE25 GE26 GE27 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 7 3 3 1 1------------------------------------------------------------------------------------------------------------------------

1 2118383 KALAINATHAN.P - 9 - 22 - - 31 FAIL

2 2118386 MAGESH.T - - - 29 - - 29 FAIL

3 2118391 PARTHEEBAN.G - - - 37 - - 37 FAIL

4 2118398 SHANMUGA SUNDARAM.A - 8 - 7 - - 15 FAIL

Page 126: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 126/214

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE12 INTRODUCTION TO COMPUTERS-I GE23 APPLIED MATHEMATICSGE24 ENGINEERING PHYSICS-II GE25 ENGINEERING CHEMISTRY-IIGE26 ENGINEERING PHYSICS PRACTICAL GE27 ENGINEERING CHEMISTRY PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER ELECTRICAL & ELECTRONICS ENGG. (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE22 EE31 EE32 GE28 EE34 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 6 6 4 3------------------------------------------------------------------------------------------------------------------------

1 2118383 KALAINATHAN.P 20 17 - - - 37 FAIL

2 2118385 LAKSHMINARAYANAN.R 18 - - - - 18 FAIL

3 2118390 NATRAJ.P 12 - - - - 12 FAIL

4 2118391 PARTHEEBAN.G 29 - - - - 29 FAIL

Page 127: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 127/214

5 2118392 PONPANDI.J 25 - - - - 25 FAIL

6 2118398 SHANMUGA SUNDARAM.A 23 18 13 - - 54 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE22 INTRODUCTION TO COMPUTERS-II EE31 ELECTRICAL CIRCUT THEORYEE32 ELECTRICAL MACHINES-I GE28 ENGINEERING GRAPHICS-CADEE34 ELECTRICAL CIRCUITS AND MACHINES PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER ELECTRICAL & ELECTRONICS ENGG. (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE33 EE42 EE35 EE36 EE46 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 3 2 2------------------------------------------------------------------------------------------------------------------------

1 2118383 KALAINATHAN.P 47 74 - - - 121 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EE33 ANALOG ELECTRONICS EE42 MEASUREMENTS AND INSTRUMENTATIONEE35 ANALOG ELECTRONICS PRACTICAL EE36 VISUAL PROGRAMMING PRACTICAL

Page 128: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 128/214

EE35 ANALOG ELECTRONICS PRACTICAL EE36 VISUAL PROGRAMMING PRACTICALEE46 MECHANICAL WORKSHOP PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 129: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 129/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR V SEMESTER ELECTRICAL & ELECTRONICS ENGG. (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE41 EE43 EE44 EE45 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 3 3------------------------------------------------------------------------------------------------------------------------

21 2118401 SRINIVASAN.N 48 48 97 81 274 PASS

22 2118402 THOMAS.A 88 45 98 61 292 PASS

23 2118403 VARADHAN.C 79 86 99 93 357 PASS

24 2118404 VIJI.A 77 80 98 83 338 PASS

------------------------------------------------------------------------------------------------------------------------

Page 130: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 130/214

* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) ANDMINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EE41 ELECTRICAL MACHINES-II EE43 DIGITAL ELECTRONICS AND MICROPROCESSOREE44 ELECTRICAL MACHINES AND INSTRUMENTATION PRACTICAL EE45 DIGITAL ELECTRONICS AND MICROPROCESSOR PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER ELECTRONICS & COMMUNICATION ENGG. (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE12 GE13 GE14 GE15 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 4 7 3 3------------------------------------------------------------------------------------------------------------------------

1 2097265 PREM CHANDAR.P - - 18 11 - 29 FAIL

2 2118154 BHARATH KUMAR.S - - 10 10 12 32 FAIL

3 2118156 DHANACHEZHIYAN.P - - 11 15 17 43 FAIL

4 2118179 NAVEEN KUMAR.P - - 10 11 - 21 FAIL

Page 131: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 131/214

5 2118181 PHILIP RICHARDSON.A - - 12 14 13 39 FAIL

6 2118196 THAMU.S - - - 49 28 77 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE12 INTRODUCTION TO COMPUTERS-IGE13 MATHEMATICS GE14 ENGINEERING PHYSICS-IGE15 ENGINEERING CHEMISTRY-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 132: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 132/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER ELECTRONICS & COMMUNICATION ENGG. (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EC31 EC32 EC33 EC34 EC35 EC36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 5 6 6 3 3------------------------------------------------------------------------------------------------------------------------

1 2118147 ABDUL NAWAZ.J - 33 - - - - 33 FAIL

2 2118154 BHARATH KUMAR.S 10 10 10 10 - - 40 FAIL

3 2118156 DHANACHEZHIYAN.P 14 13 21 17 - - 65 FAIL

4 2118179 NAVEEN KUMAR.P 6 10 10 4 - - 30 FAIL

5 2118181 PHILIP RICHARDSON A 15 11 22 15 63 FAIL

Page 133: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 133/214

5 2118181 PHILIP RICHARDSON.A 15 11 22 15 - - 63 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EC31 ELECTRONIC DEVICES, COMPONENTS AND APPLICATIONS EC32 ELECTRICAL CIRCUITS AND MACHINESEC33 DIGITAL ELECTRONICS EC34 MEASURING INSTRUMENTS AND CONTROL ENGINEERINGEC35 ELECTRONIC DEVICES, COMPONENTS AND APPLICATIONS PRACTICAL EC36 DIGITAL ELECTRONICS PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 134: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 134/214

Page 135: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 135/214

Page 136: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 136/214

Page 137: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 137/214

Page 138: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 138/214

Page 139: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 139/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER ELECTRONICS & COMMUNICATION ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EC31 EC32 EC33 EC34 EC35 EC36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 5 6 6 3 3------------------------------------------------------------------------------------------------------------------------

1 2107745 AKASH.V 13 - - 44 - - 57 FAIL

2 2107752 HEMA KUMAR.C.M - 10 - 10 - - 20 FAIL

3 2107763 MUTHUPPALANIAPPAN.T - 27 - 53 - - 80 FAIL

4 2107766 PARTHASARATHY.S 11 13 - 18 - - 42 FAIL

5 2107768 SANTHOSH KUMAR.W - 24 - 21 - - 45 FAIL

Page 140: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 140/214

6 2107771 STEPHEN RAJ.S - 28 - - - - 28 FAIL

7 2118206 ANAYAN.A 12 10 10 10 - - 42 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EC31 ELECTRONIC DEVICES, COMPONENTS AND APPLICATIONS EC32 ELECTRICAL CIRCUITS AND MACHINESEC33 DIGITAL ELECTRONICS EC34 MEASURING INSTRUMENTS AND CONTROL ENGINEERINGEC35 ELECTRONIC DEVICES, COMPONENTS AND APPLICATIONS PRACTICAL EC36 DIGITAL ELECTRONICS PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER ELECTRONICS & COMMUNICATION ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EC41 EC44 EC46 EC47 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 3 3 10------------------------------------------------------------------------------------------------------------------------

1 2107752 HEMA KUMAR.C.M 43 - - - 43 PASS

2 2107763 MUTHUPPALANIAPPAN.T 45 - - - 45 PASS

3 2107766 PARTHASARATHY.S 24 - - - 24 FAIL

4 2107768 SANTHOSH KUMAR.W 24 - - - 24 FAIL

5 2118206 ANAYAN.A 20 55 - - 75 FAIL

Page 141: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 141/214

6 2118207 ARUL GUNA SEELAN.J 42 - - - 42 PASS

7 2118213 GOPINATH.G 51 - - - 51 PASS

8 2118214 JAGAN.R 46 - - - 46 PASS

9 2118217 LATHA.B - - 88 - 88 PASS

10 2118226 SOWMYA.E 48 - - - 48 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EC41 MICROCONTROLLER AND MICROPROCESSOR EC44 MICROCONTROLLER AND MICROPROCESSOR PRACTICALEC46 ELECTRICAL CIRCUITS, MACHINES AND INSTRUMENTATION PRACTICALEC47 INDUSTRIAL TRAINING-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 142: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 142/214

Page 143: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 143/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VI SEMESTER ELECTRONICS & COMMUNICATION ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EC51 EC61 EC62 EC54 EC55 EC63 GE57 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 5 5 3 2 3 2------------------------------------------------------------------------------------------------------------------------

1 2107745 AKASH.V 21 - - - - - - 21 FAIL

2 2107766 PARTHASARATHY.S 13 - 10 - - - - 23 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EC51 ADVANCED COMMUNICATION SYSTEM EC61 COMPUTER HARDWARE AND NETWORKINGEC62 AUTOMATED TEST SYSTEM AND SURFACE MOUNT TECHNOLOGY EC54 ADVANCED COMMUNICATION SYSTEM PRACTICALEC55 'C' PROGRAMMING PRACTICAL EC63 COMPUTER HARDWARE AND NETWORKING PRACTICAL

Page 144: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 144/214

EC55 C PROGRAMMING PRACTICAL EC63 COMPUTER HARDWARE AND NETWORKING PRACTICALGE57 TECHNICAL COMMUNICATION SKILLS PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 145: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 145/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VII SEMESTER ELECTRONICS & COMMUNICATION ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 EC64 EC66 EC71 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 3 3 10------------------------------------------------------------------------------------------------------------------------

21 2107766 PARTHASARATHY.S 27 85 87 89 288 FAIL

22 2107767 PREETHI.B 99 98 95 97 389 D

23 2107768 SANTHOSH KUMAR.W 31 88 91 88 298 FAIL

24 2107769 SATHISHKUMAR.N 54 88 85 87 314 I

25 2107770 SIVASANKARI.S 96 99 94 94 383 D

26 2107771 STEPHEN RAJ.S 39 93 93 90 315 FAIL

Page 146: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 146/214

27 2107772 SUGANYA.K 64 94 88 94 340 D

28 2107773 UMAMAGESWARI.R 100 100 97 97 394 D

29 2107774 VENKATESAN.G 71 98 83 90 342 D

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT EC64 EQUIPMENTS MAINTENANCE, INDUSTRIAL AUTOMATION AND SMT PRACTICALEC66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER EC71 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 147: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 147/214

Page 148: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 148/214

Page 149: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 149/214

Page 150: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 150/214

Page 151: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 151/214

Page 152: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 152/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VI SEMESTER ELECTRONICS ROBOTICS (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ER61 ER62 ER63 GE57 ER64 ER65 ER66 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 5 4 2 3 3 2------------------------------------------------------------------------------------------------------------------------

1 2086869 PRIYADHARSHINI.M 17 - - - - - - 17 FAIL

2 2107797 RAJA.D - 10 - - - - - 10 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

ER61 MICROPROCESSOR AND MICROCONTROLLER ER62 PROCESS CONTROL AND INSTRUMENTATIONER63 ROBOTICS GE57 TECHNICAL COMMUNICATION SKILLS PRACTICALER64 MICROPROCESSOR AND MICROCONTROLLER LAB ER65 PROCESS CONTROL AND INSTRUMENTATION LABER66 ROBOTICS LAB

Page 153: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 153/214

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 154: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 154/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VII SEMESTER ELECTRONICS ROBOTICS (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 ER71 ER72 ER73 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 2 3 10------------------------------------------------------------------------------------------------------------------------

21 2107795 NANDHA KUMAR.R 78 95 86 90 349 D

22 2107796 NIRMAL KUMAR.V 69 95 74 83 321 I

23 2107797 RAJA.D 34 92 74 83 283 FAIL

24 2107798 SANTHOSH.R 74 95 90 89 348 D

25 2107799 SARANYA.B 57 95 90 92 334 I

26 2107800 SARANYA.R 67 98 89 94 348 D

27 2107801 SUNDARESAN.K 69 95 87 90 341 D

28 2107802 VINITHA P 71 97 75 94 337 D

Page 155: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 155/214

28 2107802 VINITHA.P 71 97 75 94 337 D

29 2107803 VINOTH KUMAR.A 52 95 77 92 316 I

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT ER71 PLC AND AUTOMATION LABER72 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER ER73 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER MECHANICAL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE12 GE13 GE14 GE15 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 4 7 3 3------------------------------------------------------------------------------------------------------------------------

1 2097378 TADAR MAMA - - 53 - - 53 PASS

2 2107851 MADHAN KUMAR.H - - 46 * - - 46 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE12 INTRODUCTION TO COMPUTERS-IGE13 MATHEMATICS GE14 ENGINEERING PHYSICS-IGE15 ENGINEERING CHEMISTRY-I

Page 156: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 156/214

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 157: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 157/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER MECHANICAL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ME31 ME32 ME33 ME34 ME35 ME36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 4 2 3------------------------------------------------------------------------------------------------------------------------

1 2097378 TADAR MAMA 46 - - - - - 46 PASS

2 2107824 RATHISH.S 56 45 - - - - 101 PASS

3 2107851 MADHAN KUMAR.H 40 29 15 - - - 84 FAIL

4 2118273 HARIHARAN.R 34 36 - - - - 70 FAIL

5 2118276 JAISHANKAR.P 55 - - - - - 55 PASS

6 2118280 SANGEETHA.K 46 - - - - - 46 PASS

7 2118291 VIGNESH.R.S 22 - 25 - - - 47 FAIL

Page 158: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 158/214

8 2118311 RAMAKRISHNAN.M 29 - - - - - 29 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

ME31 MECHANICS OF MATERIALS ME32 MANUFACTURING PROCESSESME33 FLUID MECHANICS AND FLUID POWER ME34 MACHINE DRAWING - CADME35 MECHANICS OF MATERIALS AND FLUID MECHANICS LAB. ME36 WORKSHOP-SMITHY, FOUNDRY AND WELDING PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 159: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 159/214

Page 160: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 160/214

Page 161: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 161/214

Page 162: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 162/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR V SEMESTER MECHANICAL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ME51 ME52 ME53 ME54 ME55 ME56 GE57 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 5 5 2 2 3 2------------------------------------------------------------------------------------------------------------------------

61 2118320 YUVARAJ.P.M 60 70 52 92 94 83 81 532 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

ME51 DESIGN OF MACHINE ELEMENTS ME52 THERMAL ENGINEERINGME53 AUTOMOBILE TECHNOLOGY ME54 AUTOMOBILE TECHNOLOGY LABME55 HYDRAULICS AND PNEUMATICS PRACTICAL ME56 WORKSHOP SPECIAL MACHINES AND EDM PRACTICALGE57 TECHNICAL COMMUNICATION SKILLS PRACTICAL

MPC.F.8.03.18

Page 163: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 163/214

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VI SEMESTER MECHANICAL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 ME61 ME62 ME63 ME64 ME65 ME66 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 5 4 3 3 2 3------------------------------------------------------------------------------------------------------------------------

1 2107830 SATHISH.S 53 - - - - - - 53 S

2 2107851 MADHAN KUMAR.H 25 - - - - - - 25 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT ME61 COMPUTER AIDED DESIGN AND MANUFACTURINGME62 PRESS TOOLS ME63 COMPUTER AIDED DESIGN AND MANUFACTURING PRACTICALME64 PRESS TOOL MAKING PRACTICAL ME65 MECHANICAL EQUIPMENT MAINTENANCE AND MACHINE TOOL TESTING

Page 164: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 164/214

ME66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER MECHANICAL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE12 GE13 GE14 GE15 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 4 7 3 3------------------------------------------------------------------------------------------------------------------------

1 2086944 DINESH.B. - - 35 - - 35 FAIL

2 2097435 SUSEENDRAN.V - - 16 16 - 32 FAIL

3 2107868 DINESH.M - - 31 31 - 62 FAIL

4 2107870 GOPI KRISHNA.K - - 25 - - 25 FAIL

5 2107873 KAMALAKANNAN.V - - 30 - - 30 FAIL

6 2107874 LOGESH.A - - 42 * 43 - 85 FAIL

7 2107878 MOHAN RAJ.V - - 25 19 - 44 FAIL

8 2118321 AJITH KUMAR V 17 26 43 FAIL

Page 165: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 165/214

8 2118321 AJITH KUMAR.V - - 17 26 - 43 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COU RSE - 30 (THEORY) / 35 (PRACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE12 INTRODUCTION TO COMPUTERS-IGE13 MATHEMATICS GE14 ENGINEERING PHYSICS-IGE15 ENGINEERING CHEMISTRY-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 166: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 166/214

Page 167: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 167/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR IV SEMESTER MECHANICAL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ME41 ME42 ME46 ME47 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 3 10------------------------------------------------------------------------------------------------------------------------

1 2086960 SATHISH KUMAR.D 17 - - - 17 FAIL

2 2097435 SUSEENDRAN.V 13 - - - 13 FAIL

3 2107870 GOPI KRISHNA.K 12 - - - 12 FAIL

4 2118321 AJITH KUMAR.V 14 42 - - 56 FAIL

5 2118334 KARTHIKEYAN.G 48 - - - 48 PASS

6 2118342 RAGHU.R 44 - - - 44 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

Page 168: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 168/214

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

ME41 APPLIED THERMODYNAMICS ME42 MACHINE SHOP TECHNOLOGYME46 WORKSHOP-LATHE AND METROLOGY PRACTICAL ME47 INDUSTRIAL TRAINING-I

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 169: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 169/214

Page 170: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 170/214

Page 171: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 171/214

Page 172: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 172/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VII SEMESTER MECHANICAL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 ME65 ME66 ME71 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 2 3 10------------------------------------------------------------------------------------------------------------------------

21 2107884 RAMESHBABU.B 78 91 93 79 341 D

22 2107885 RAMU.A.S 56 95 92 86 329 D

23 2107886 RANGANATHAN.P 71 96 97 84 348 D

24 2107887 SILAMBARASAN.V 100 99 97 94 390 D

25 2107888 SRINIVASAN.K 62 72 90 81 305 I

26 2107889 VIGNESH.R 54 82 83 73 292 W

27 2107890 VIGNESH.R.P 75 86 92 87 340 D

28 2107891 VIJAY.K 66 83 96 85 330 I

29 2107892 VIJAYA KUMAR M 68 95 97 87 347 D

Page 173: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 173/214

29 2107892 VIJAYA KUMAR.M 68 95 97 87 347 D

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT ME65 MECHANICAL EQUIPMENT MAINTENANCE AND MACHINE TOOL TESTINGME66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER ME71 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER MECHANICAL ENGINEERING (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE13 GE14 GE15 GE21 GE29 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 7 3 3 2 2------------------------------------------------------------------------------------------------------------------------

1 2118442 RAJENDRAN.K - 17 - - - - 17 FAIL

2 2118447 SELVARAJ.R - 17 - - - - 17 FAIL

3 2118449 SENTHIL.C - 12 - - - - 12 FAIL

4 2118452 SURESH KUMAR.S - 34 - - - - 34 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE13 MATHEMATICSGE14 ENGINEERING PHYSICS-I GE15 ENGINEERING CHEMISTRY-IGE21 COMMUNICATION SKILLS IN ENGLISH PRACTICAL GE29 WORKSHOP PRACTICE

Page 174: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 174/214

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR II SEMESTER MECHANICAL ENGINEERING (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE12 GE23 GE24 GE25 GE26 GE27 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 7 3 3 1 1------------------------------------------------------------------------------------------------------------------------

1 2118426 KARUNAKARAN.K 25 40 - - - - 65 FAIL

2 2118442 RAJENDRAN.K - 8 - - - - 8 FAIL

3 2118447 SELVARAJ.R - 13 19 - - - 32 FAIL

4 2118449 SENTHIL.C - 10 - - - - 10 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE12 INTRODUCTION TO COMPUTERS-I GE23 APPLIED MATHEMATICSGE24 ENGINEERING PHYSICS-II GE25 ENGINEERING CHEMISTRY-IIGE26 ENGINEERING PHYSICS PRACTICAL GE27 ENGINEERING CHEMISTRY PRACTICAL

Page 175: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 175/214

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER MECHANICAL ENGINEERING (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE22 ME31 ME32 GE28 ME36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 6 6 4 3------------------------------------------------------------------------------------------------------------------------

1 2118426 KARUNAKARAN.K 56 44 - - - 100 PASS

2 2118435 MUTHURAJ.D 48 40 * - - - 88 FAIL

3 2118442 RAJENDRAN.K 11 13 - - - 24 FAIL

4 2118447 SELVARAJ.R 18 49 - - - 67 FAIL

5 2118449 SENTHIL.C 14 11 - - - 25 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE22 INTRODUCTION TO COMPUTERS-II ME31 MECHANICS OF MATERIALS

ME32 MANUFACTURING PROCESSES GE28 ENGINEERING GRAPHICS-CADME36 WORKSHOP SMITHY FOUNDRY AND WELDINGPRACTICAL

Page 176: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 176/214

ME36 WORKSHOP-SMITHY, FOUNDRY AND WELDING PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER MECHANICAL ENGINEERING (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ME33 ME41 ME34 ME35 ME44 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 4 2 3------------------------------------------------------------------------------------------------------------------------

1 2118424 JAYAPRAKASH RAJ.J 42 18 - - - 60 FAIL

2 2118426 KARUNAKARAN.K 40 * 29 - - - 69 FAIL

3 2118435 MUTHURAJ.D 40 * 30 - - - 70 FAIL

4 2118442 RAJENDRAN.K 11 - - - - 11 FAIL

5 2118447 SELVARAJ.R 25 13 - - - 38 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

ME33 FLUID MECHANICS AND FLUID POWER ME41 APPLIED THERMODYNAMICS

ME34 MACHINE DRAWING - CAD ME35 MECHANICS OF MATERIALS AND FLUID MECHANICS LAB.ME44 THERMODYNAMICS LAB

Page 177: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 177/214

ME44 THERMODYNAMICS LAB

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 178: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 178/214

Page 179: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 179/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR V SEMESTER MECHANICAL ENGINEERING (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ME42 ME43 ME45 ME46 ME55 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 4 3 3 2------------------------------------------------------------------------------------------------------------------------

41 2118451 SUNDAR.G 92 94 97 99 96 478 PASS

42 2118452 SURESH KUMAR.S 63 59 89 97 91 399 PASS

43 2118453 THANGAVEL.G 79 80 90 95 96 440 PASS

44 2118454 THINAGARAN.M 57 57 88 87 89 378 PASS

45 2118455 UMANATH.S 57 19 89 85 93 343 FAIL

46 2118456 VAITHI.J 71 87 95 97 97 447 PASS

47 2118458 YOKANANTHABABU.D 80 74 93 95 93 435 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

Page 180: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 180/214

ME42 MACHINE SHOP TECHNOLOGY ME43 ELECTRICAL AND ELECTRONICS ENGINEERINGME45 ELECTRICAL & ELECTRONICS ENGINEERING LAB ME46 WORKSHOP-LATHE AND METROLOGY PRACTICALME55 HYDRAULICS AND PNEUMATICS PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 181: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 181/214

Page 182: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 182/214

Page 183: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 183/214

Page 184: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 184/214

Page 185: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 185/214

Page 186: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 186/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VI SEMESTER MECHANICAL ENGG. (TOOL & DI E) (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ME61 TD61 TD62 TD63 ME63 TD64 TD65 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 4 4 4 3 3 3------------------------------------------------------------------------------------------------------------------------

1 2076519 PARTHIBAN.V 28 41 * - - - - - 69 FAIL

2 2086972 M.ARUNKUMAR - 63 24 - - - - 87 FAIL

3 2107896 ARAVINDAN.K 23 46 13 12 - - - 94 FAIL

4 2107918 THULASIDHARAN.E - - - 16 - - - 16 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

ME61 COMPUTER AIDED DESIGN AND MANUFACTURING TD61 PRESS TOOLSTD62 PLASTIC MOULDING TECHNOLOGY TD63 DESIGN OF FORGING DIES AND DIE CASTING DIESME63 COMPUTER AIDED DESIGN AND MANUFACTURING PRACTICAL TD64 PRESS TOOL MAKING PRACTICALTD65 PLASTIC MOULD MAKING PRACTICAL

MPC F 8 03 18

Page 187: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 187/214

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 188: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 188/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VII SEMESTER MECHANICAL ENGG. (TOOL & D IE) (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 TD71 TD72 TD73 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 2 3 10------------------------------------------------------------------------------------------------------------------------

21 2107916 SRINIVASAN.N 94 92 92 97 375 D

22 2107917 THARANIKUMAR.N 78 86 85 91 340 D

23 2107918 THULASIDHARAN.E 22 88 63 92 265 FAIL

24 2107919 VELU.M 48 86 89 94 317 D

25 2107920 VENTHA KRISHNAN.A 72 83 89 92 336 D

26 2107921 VIGNESH.K 47 88 78 91 304 I

27 2107922 VINOTH.K 21 74 61 79 235 FAIL

28 2107923 YUVA RAJ.G 49 91 86 95 321 I

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

Page 189: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 189/214

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT TD71 MODERN PRODUCTION PROCESS LABTD72 PROJECT WORK, ENTREPRENEURSHIP ENVIRONMENT AND DISASTER TD73 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR I SEMESTER MECHANICAL ENGG. (TOOL & DIE ) (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE11 GE13 GE14 GE15 GE21 GE29 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 7 3 3 2 2------------------------------------------------------------------------------------------------------------------------

1 2118473 MOHAMMED SHEIK MANSOOR.A - 10 10 - - - 20 FAIL

2 2118476 RAJAPPA.K - - 39 - - - 39 FAIL

3 2118484 SENTHILKUMAR.R.M - 36 - - - - 36 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COU RSE - 30 (THEORY) / 35 (PRACTICAL) / 25 (Ind.Trg./ TCS)

GE11 COMMUNICATION SKILLS IN ENGLISH GE13 MATHEMATICSGE14 ENGINEERING PHYSICS-I GE15 ENGINEERING CHEMISTRY-IGE21 COMMUNICATION SKILLS IN ENGLISH PRACTICAL GE29 WORKSHOP PRACTICE

MPC.F.8.03.18

Page 190: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 190/214

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR II SEMESTER MECHANICAL ENGG. (TOOL & DI E) (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE12 GE23 GE24 GE25 GE26 GE27 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 7 3 3 1 1------------------------------------------------------------------------------------------------------------------------

1 2118473 MOHAMMED SHEIK MANSOOR.A - 7 5 3 - - 15 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE12 INTRODUCTION TO COMPUTERS-I GE23 APPLIED MATHEMATICSGE24 ENGINEERING PHYSICS-II GE25 ENGINEERING CHEMISTRY-IIGE26 ENGINEERING PHYSICS PRACTICAL GE27 ENGINEERING CHEMISTRY PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 191: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 191/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER MECHANICAL ENGG. (TOOL & D IE) (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE22 ME31 TD31 GE28 ME36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 6 6 4 3------------------------------------------------------------------------------------------------------------------------

1 2118461 DHARUMAN.P - 45 - - - 45 PASS

2 2118473 MOHAMMED SHEIK MANSOOR.A 10 11 29 - - 50 FAIL

3 2118476 RAJAPPA.K 27 - - - - 27 FAIL

4 2118477 RAJKUMAR.S - 55 - - - 55 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

GE22 INTRODUCTION TO COMPUTERS-II ME31 MECHANICS OF MATERIALSTD31 MANUFACTURING PROCESSES GE28 ENGINEERING GRAPHICS-CADME36 WORKSHOP-SMITHY, FOUNDRY AND WELDING PRACTICAL

MPC.F.8.03.18

Page 192: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 192/214

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER MECHANICAL ENGG. (TOOL & DI E) (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : TD32 TD41 ME34 TD33 TD42 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 5 4 3 3------------------------------------------------------------------------------------------------------------------------

1 2118459 BABU.K - 59 - - - 59 PASS

2 2118463 GANESAN.G 72 - - - - 72 PASS

3 2118473 MOHAMMED SHEIK MANSOOR.A 11 34 - - - 45 FAIL

4 2118481 SARAVANAN.P - 62 - - - 62 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

TD32 FLUID POWER AND THERMAL ENGINEERING TD41 MACHINE SHOP TECHNOLOGYME34 MACHINE DRAWING - CAD TD33 METROLOGY PRACTICALTD42 WORKSHOP-II - TURNING, DRILLING AND SHAPING

MPC.F.8.03.18

Page 193: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 193/214

CHAIRMAN, AWARDS COMMITTEE

Page 194: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 194/214

AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR V SEMESTER MECHANICAL ENGG. (TOOL & DIE ) (PARTTIME)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : TD51 TD52 TD43 TD54 ME55 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 5 2 3 2------------------------------------------------------------------------------------------------------------------------

21 2118482 SENTHIL.K 47 65 85 83 82 362 PASS

22 2118483 SENTHILKUMAR.R 78 85 90 99 89 441 PASS

23 2118484 SENTHILKUMAR.R.M 70 78 84 80 83 395 PASS

24 2118485 SRIDEVI.S 85 87 96 84 86 438 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

TD51 ENGINERING MATERIALS AND METALLURGY TD52 TOOL ROOM SPECIAL MACHINESTD43 MECHANICAL MATERIAL TESTING PRACTICAL TD54 TOOL ROOM SPECIAL MACHINES PRACTICALME55 HYDRAULICS AND PNEUMATICS PRACTICAL

MPC.F.8.03.18

Page 195: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 195/214

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR V SEMESTER CIVIL ENGINEERING (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CE51 CE52 CE53 CE54 CE55 CE56 GE57 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 5 5 4 2 2 2------------------------------------------------------------------------------------------------------------------------

1 2128486 SANTHOSHKUMAR.S 78 66 63 92 89 88 78 554 PASS

------------------------------------------------------------------------------------------------------------------------

* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) ANDMINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

CE51 STRUCTURAL ENGINEERING CE52 TRANSPORTATION ENGINEERINGCE53 ADVANCED CONSTRUCTION TECHNOLOGY CE54 CAD IN CIVIL ENGINEERING-IIICE55 CONSTRUCTION PRACTICAL-I CE56 MATERIAL TESTING PRACTICAL-IIGE57 TECHNICAL COMMUNICATION SKILLS PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 196: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 196/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER ELECTRICAL & ELECTRONICS ENGG. (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE31 EE32 EE33 EE34 EE35 EE36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 3 3 2------------------------------------------------------------------------------------------------------------------------

1 2117942 HARISH KUMAR.S 36 - - - - - 36 FAIL

2 2128489 RAMAR.S 35 23 - - - - 58 FAIL

3 2128491 VELU.J 30 - - - - - 30 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EE31 ELECTRICAL CIRCUT THEORY EE32 ELECTRICAL MACHINES-IEE33 ANALOG ELECTRONICS EE34 ELECTRICAL CIRCUITS AND MACHINES PRACTICALEE35 ANALOG ELECTRONICS PRACTICAL EE36 VISUAL PROGRAMMING PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 197: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 197/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER ELECTRICAL & ELECTRONICS ENGG. (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE41 EE42 EE43 EE44 EE45 EE46 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 3 3 2------------------------------------------------------------------------------------------------------------------------

1 2128489 RAMAR.S - 26 44 - - - 70 FAIL

------------------------------------------------------------------------------------------------------------------------

* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) ANDMINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EE41 ELECTRICAL MACHINES-II EE42 MEASUREMENTS AND INSTRUMENTATIONEE43 DIGITAL ELECTRONICS AND MICROPROCESSOR EE44 ELECTRICAL MACHINES AND INSTRUMENTATION PRACTICALEE45 DIGITAL ELECTRONICS AND MICROPROCESSOR PRACTICAL EE46 MECHANICAL WORKSHOP PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 198: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 198/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR V SEMESTER ELECTRICAL & ELECTRONICS ENGG. (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE51 EE52 EE53 EE54 EE55 EE56 GE57 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 4 5 4 3 3 2------------------------------------------------------------------------------------------------------------------------

1 2128487 KUMARAN.K 92 88 76 88 97 98 89 628 PASS

2 2128488 MANOKARAN.S 74 63 54 49 96 74 84 494 PASS

3 2128489 RAMAR.S 35 62 40 * 37 95 70 79 418 FAIL

4 2128490 SATHISH.K 94 89 78 74 99 96 89 619 PASS

5 2128491 VELU.J 59 45 50 51 97 69 72 443 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EE51 POWER SYSTEM-I EE52 MICROCONTROLLER AND EMBEDDED SYSTEMEE53 POWER ELECTRONICS AND DRIVES EE54 ELECTRICAL ENERGY MANAGEMENTEE55 POWER ELECTRONICS AND DRIVES PRACTICAL EE56 MICROCONTROLLER AND EMBEDDED SYSTEM PRACTICALGE57 TECHNICAL COMMUNICATION SKILLS PRACTICAL

MPC.F.8.03.18

Page 199: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 199/214

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR III SEMESTER ELECTRONICS & COMMUNICATION ENGG. (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EC31 EC32 EC33 EC34 EC35 EC36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 5 6 6 3 3------------------------------------------------------------------------------------------------------------------------

1 2117949 PRASATH.J

2 2117952 SIVA.K - 24 - - - - 24 FAIL

3 2128493 DURAIVEL.J.A - 29 - 36 - - 65 FAIL

4 2128494 JAGAN.R - 55 - - - - 55 PASS

5 2128496 MANIKANDAN.D - 22 - - - - 22 FAIL

6 2128497 SURESH BABU.R - 27 - - - - 27 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EC31 ELECTRONIC DEVICES, COMPONENTS AND APPLICATIONS EC32 ELECTRICAL CIRCUITS AND MACHINESEC33 DIGITAL ELECTRONICS EC34 MEASURING INSTRUMENTS AND CONTROL ENGINEERINGEC35 ELECTRONIC DEVICES, COMPONENTS AND APPLICATIONS PRACTICAL EC36 DIGITAL ELECTRONICS PRACTICAL

Page 200: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 200/214

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR IV SEMESTER ELECTRONICS & COMMUNICATION ENGG. (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EC41 EC42 EC43 EC44 EC45 EC46 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 5 6 3 3 3------------------------------------------------------------------------------------------------------------------------

1 2117949 PRASATH.J

2 2117952 SIVA.K 53 - - - - - 53 PASS

3 2128492 ANNAMALAI.V - 47 - - - - 47 PASS

4 2128493 DURAIVEL.J.A 42 28 - - - - 70 FAIL

5 2128496 MANIKANDAN.D 46 29 - - - - 75 FAIL

6 2128497 SURESH BABU.R - 62 - - - - 62 PASS

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

EC41 MICROCONTROLLER AND MICROPROCESSOR EC42 COMMUNICATION ENGINEERINGEC43 INDUSTRIAL ELECTRONICS EC44 MICROCONTROLLER AND MICROPROCESSOR PRACTICALEC45 INDUSTRIAL ELECTRONICS AND COMMUNICATION ENGINEERING PRACTICAL EC46 ELECTRICAL CIRCUITS, MACHINES AND INSTRUMENTATION PRACTICAL

Page 201: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 201/214

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 202: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 202/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR III SEMESTER MECHANICAL ENGINEERING (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ME31 ME32 ME33 ME34 ME35 ME36 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 6 4 2 3------------------------------------------------------------------------------------------------------------------------

1 2128508 SIMON.P.B 23 - - - - - 23 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

ME31 MECHANICS OF MATERIALS ME32 MANUFACTURING PROCESSESME33 FLUID MECHANICS AND FLUID POWER ME34 MACHINE DRAWING - CADME35 MECHANICS OF MATERIALS AND FLUID MECHANICS LAB. ME36 WORKSHOP-SMITHY, FOUNDRY AND WELDING PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 203: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 203/214

Page 204: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 204/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR IV SEMESTER MECHANICAL ENGINEERING (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : ME41 ME42 ME43 ME44 ME45 ME46 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 6 6 4 3 3 3------------------------------------------------------------------------------------------------------------------------

1 2128508 SIMON.P.B 26 - - - - - 26 FAIL

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) ANDMINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

ME41 APPLIED THERMODYNAMICS ME42 MACHINE SHOP TECHNOLOGYME43 ELECTRICAL AND ELECTRONICS ENGINEERING ME44 THERMODYNAMICS LABME45 ELECTRICAL & ELECTRONICS ENGINEERING LAB ME46 WORKSHOP-LATHE AND METROLOGY PRACTICAL

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 205: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 205/214

Page 206: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 206/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VI SEMESTER MECHANICAL ENGINEERING (LATERAL)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 ME61 ME62 ME63 ME64 ME65 ME66 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 5 4 3 3 2 3------------------------------------------------------------------------------------------------------------------------

1 2117959 PURUSHOTHAMAN.J - - 55 - - - - 55 S

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) ANDMINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT ME61 COMPUTER AIDED DESIGN AND MANUFACTURINGME62 PRESS TOOLS ME63 COMPUTER AIDED DESIGN AND MANUFACTURING PRACTICALME64 PRESS TOOL MAKING PRACTICAL ME65 MECHANICAL EQUIPMENT MAINTENANCE AND MACHINE TOOL TESTINGME66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 207: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 207/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VI SEMESTER CIVIL ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CE61 CE62 CE63 CE64 CE65 CE66 CE67 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 5 5 4 2 3 3------------------------------------------------------------------------------------------------------------------------

1 2107515 BALAJI.R 54 55 46 69 80 93 89 486 S

2 2107518 DINESH KUMAR.A 73 65 59 82 74 91 95 539 S

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

CE61 CONSTRUCTION MANAGEMENT CE62 ENVIRONMENTAL ENGINEERINGCE63 QUANTITY SURVEYING CE64 TOWN PLANNINGCE65 CONSTRUCTION PRACTICAL-II CE66 COMPUTER APPLICATION IN CIVIL ENGINEERINGCE67 PROJECT WORK

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 208: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 208/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VII SEMESTER CIVIL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : CE61 CE65 CE67 CE71 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 4 2 3 10------------------------------------------------------------------------------------------------------------------------

1 2086620 GANESH KUMAR.S 49 52 80 83 264 S

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) ANDMINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

CE61 CONSTRUCTION MANAGEMENT CE65 CONSTRUCTION PRACTICAL-IICE67 PROJECT WORK CE71 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 209: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 209/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VI SEMESTER COMPUTER ENGINEERING (REGULAR)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 CS61 CS62 CS63 CS64 CS65 CS66 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 5 4 2 3 2 3------------------------------------------------------------------------------------------------------------------------

1 2097116 DIVYABHARATHI.E 50 60 43 84 94 89 84 504 S

------------------------------------------------------------------------------------------------------------------------

* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) ANDMINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT CS61 MOBILE COMPUTINGCS62 NETWORK ADMINISTRATION CS63 NETWORK ADMINISTRATION PRACTICALCS64 .NET PROGRAMMING PRACTICAL CS65 MULTIMEDIA SYSTEM PRACTICALCS66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 210: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 210/214

Page 211: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 211/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62

AUTONOMOUS EXAMINATIONS - OCTOBER 2013RESULTS FOR VII SEMESTER ELECTRICAL & ELECTRONICS ENGG. (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : EE62 EE63 EE66 EE71 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 3 3 10------------------------------------------------------------------------------------------------------------------------

1 2076266 DILLI BABU.B 69 57 86 82 294 S

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

EE62 INDUSTRIAL CONTROLS AND PLC EE63 INDUSTRIAL CONTROLS AND PLC PRACTICALEE66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER EE71 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 212: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 212/214

Page 213: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 213/214

MURUGAPPA POLYTECHNIC COLLEGE, CHENNAI-62AUTONOMOUS EXAMINATIONS - OCTOBER 2013

RESULTS FOR VII SEMESTER MECHANICAL ENGINEERING (SANDWICH)

------------------------------------------------------------------------------------------------------------------------COURSE CODE : GE61 ME65 ME66 ME71 TOTAL RESULT

SNO. REG_NO. NAME CREDIT : 5 2 3 10------------------------------------------------------------------------------------------------------------------------

1 2097418 JETHANDHAR.A 59 94 90 92 335 S

2 2097420 KUMARESAN.N 46 77 90 76 289 S

------------------------------------------------------------------------------------------------------------------------* MINIMUM MARKS FOR PASS IN EACH COURSE - 40 (THEORY) / 50 (PRACTICAL) AND

MINIMUM MARKS FOR END EXAMINATION IN EACH COURSE - 30 (THEORY) / 35 (P RACTICAL) / 25 (Ind.Trg./ TCS)

RESULT: D - FIRST CLASS WITH DI STINCTION, I - FIRST CLASS, S - SECOND CLASS, W - WI THHELD

GE61 INDUSTRIAL ENGINEERING AND MANAGEMENT ME65 MECHANICAL EQUIPMENT MAINTENANCE AND MACHINE TOOL TESTINGME66 PROJECT WORK, ENTREPRENEURSHIP, ENVIRONMENT AND DISASTER ME71 INDUSTRIAL TRAINING-II

MPC.F.8.03.18

CHAIRMAN, AWARDS COMMITTEE

Page 214: MPC-Autonomous Examinations Results - October 2013

8/13/2019 MPC-Autonomous Examinations Results - October 2013

http://slidepdf.com/reader/full/mpc-autonomous-examinations-results-october-2013 214/214

******* END *******