Upload
mani-kandan
View
12
Download
0
Embed Size (px)
DESCRIPTION
motor
Citation preview
GG-Kennungoder Produktname
Automation and Drives
Breathtakingly powerful –Drive solutions in their element
ow-voltage motors
L
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 2e
Low-voltage motors
Power range: 60 W to 1000 kW
Voltage: Up to 1000 V
Frame sizes: 56M ... 450
Concentrated power without limitsMotors which will certainly move you
n Energy-saving motorsfor the European and US markets,in compliance with EPACT(US legislation, October 97)
n Standard motors with NEMAdimensions Rugged gray cast iron frames
n Explosion-protected motors“increased safety” and “flameproof enclosure”
n Single-phase motorsfor industrial applications
n Customer-specific motors
n Certified smoke extraction motors
n Type-approved motors for marine applicationsfor operation below deck
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 3e
Low-voltage motors
Energy-saving motorsMove for your benefit
IEC energy-saving motorsn For Europe with EU efficiency
Classes EFF1 and EFF2n For North America in compliance
with EPACT certification CC032Aand optionally CSA-E
Advantages of EFF1 /EPACT motors at a glance: n Noticeably lower operating costsn One motor for Europe and the USn Longer motor lifetime and grease
lifetime as a result of lower motortemperatures
n High overload reserve SF 1.15in continuous operation
n Wide variety of optionsn Inverter-proof up to 500V - alternatively 690V
Power range: 60 W to 1000 kW
Voltage: Up to 1000 V
Frame sizes: 56M ... 450
Energy costs represent 97% of the costs of a motor - only 3% for the actual motor and installation
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 4e
Low-voltage motors
Explosion-protected motorsFull-line supplier for the most frequently encountered hazardous areas
n Increased safety – Zone 1II 2G EEx e IITemperature Classes: T1-T3
Frame:Aluminum or gray cast iron
n Flameproof enclosure – Zone 1 II 2G EEx de IIC
Temperature Classes: T1-T4Inverter-proof up to 500V - 690Von request
All versions are certified for:
n 50Hz and 60Hz for all of the usual voltages
Power range: EEx e: 0.12 to 165 kWEEx de: 0.25 to 900 kW
Frame sizes: EEx e: 63M to 315LEEx de: 71M - 450
ATEX
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 5e
Low-voltage motors
Explosion-protected motors Maximum safety with the highest efficiency
n Non-Sparking – Zone 2II 3G EEx nA II T3 (EN 50021)and Ex nA II T3 (IEC 60079-15)
n Dust-explosion proofZone 21: II 2D IP65 T125°CZone 22: II 3D IP55 T125°C
n Certified for:50Hz and 60Hz for allof the usual voltages
n As energy-saving motorsn EFF1 / EPACT and EFF2n Aluminum or cast iron frame
ATEX
Power range: (E)Ex n: 120 W to 1000 kWDust Ex: 60 W to 200 kW
Frame sizes: (E)Ex n: 63M ... 450Dust Ex: 56 M to 315L
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 6e
Low-voltage motors
Motors according to the NEMA StandardPowerful, rugged, reliable
Range of typesn General Purpose, Severe Duty,
Explosion-Proof motorsn Rugged versions for use in industry,
the trades and domestic applicationsEfficiency versionsn EPAct Efficiencyn IEEE 841 Efficiencyn NEMA Premium EfficiencyDegree of protection/coolingn TEFCn Open Drip Proof (ODP)Explosion-proof versionsn Multi-label (Class 1 Group D,
Class 2 Group F&Gn Single-label (Class 1 Group C&D)
Low-voltage industrial motors acc. to the NEMA Standardfor NAFTA
Frame sizes: NEMA 56 ... 449Power range: 0.25 ... 500 hp
3-phase and single phase
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 7e
Low-voltage motors
Modular mounting conceptThe modular system for all requirements
Module 1: Rotary pulse encodern Variable-speed drives can be simply
implemented - also as retrofitn In either an HTL or TTL version
Module 2: Forced ventilationn Constant cooling performancen Absolutely necessary at low speedsn High degree of utilization
for drive inverter operation
Module 3: Mechanical braken Spring-operated brake, mounted
in the factoryn Optional mechanical manual release
and/or non-standard brake voltagesn Braking torque: 5-1600 Nm
Rotary pulse encoderand forced ventilationMotor frame sizes: 100L to 315L
Mechanical brakeMotor frame sizes: 63M to 315L
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 8e
Low-voltage motors
Motors for specific industry sectorsThe optimum motor for every application
Roller-table motors:n Used in reversing rolling millsn Transversely ribbed frame out of
spheroid cast ironn Inverter-proof up to 500V –
optionally up to 690V
Smoke-extraction motors:n According to EN12101-3/June 2002
certified motors for fire ClassesF200/F300 and F400
n Motor series universally acceptedfor all axial and radial fans
n Assignment of standard powersis unchanged!
Roller-table motorsPower range: 4 kW to 66 kWFrame sizes: 132M to 400
Smoke-extraction motorsPower range: 0.55 kW to 200 kWFrame sizes: 80M to 315L
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 9e
Low-voltage motors
Motors for specific industry sectorsThe optimum motor for every requirement
Marine motors for operationbelow deckn Type-approved in compliance with
leading international ClassificationSocietiesn Bureau Veritas (BV)n Germanischer Lloyd (GL)n Lloyds Register of Shipping (LR)n Det Norske Veritas (DNV)
n Energy-saving motors and explosion-protected motors, Classesof protection EExe II T1-T3and EExdeIIC T1-T4are type-approved
n The motors can be equipped with allof the options to implement individualdrive tasks
Frame sizes: 56M to 315LPower range: 0.06 kW to 200 kW
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 10e
Low-voltage motors
Customer-specific motorsSpecial solutions
Examples of motor versions which havealready been implemented:n High-speed motors for textile machines
and compressors
n Motors with increased power density
n Liquid-cooled motors
n Synchronous generators for line supply back-up
n Motors for woodworking machines
n Build-in motors for refrigeration compressors
n Pump motors - e.g. with special shafts
n Single-phase motors for industrial applications
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 11e
Low-voltage motors
ToolsEnergy-saving program (CD-ROM)
Additional Internet version:www.siemens.de/energiesparprogrammwww.siemens.com/energysavingprogram
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 12e
Low-voltage motors
ToolsSD Configurator
Simplified selection and Technical Reference Manual (program help)
PDF created with pdfFactory trial version www.pdffactory.com
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 13e
Low-voltage motors
ToolsSD Configurator
Extensive documentation
Operating Instructions, certificates... Dimension drawing generator (DXF / BMP)for motors
Starting calculation Data sheet generator for motors
PDF created with pdfFactory trial version www.pdffactory.com