Moshell Manual - BSS MANUAL - Usage Ericsson

MOSHELL BASIC

1 INTRODUCTION TO CPP O&M ............................................................................................................................................................................................................ 5 1.1 CPP functional structure .................................................................................................................................................................................................................. 5 1.2 CPP O&M Interfaces ....................................................................................................................................................................................................................... 7

2 MOSHELL/AMOS ................................................................................................................................................................................................................................... 8 2.1 Moshell installation .......................................................................................................................................................................................................................... 9 2.2 Opening an moshell session ......................................................................................................................................................................................................... 10 2.3 AMOS architecture ........................................................................................................................................................................................................................ 11 2.4 AMOS installation .......................................................................................................................................................................................................................... 11 2.5 Opening an AMOS session ........................................................................................................................................................................................................... 13 2.6 Online Help .................................................................................................................................................................................................................................... 15 2.7 Moshell web ................................................................................................................................................................................................................................... 19 2.8 Prompt and printout header .......................................................................................................................................................................................................... 21 2.9 Environment variables ................................................................................................................................................................................................................... 23 2.10 Command line ............................................................................................................................................................................................................................. 24 2.11 Session Logging .......................................................................................................................................................................................................................... 24 2.12 Command piping ......................................................................................................................................................................................................................... 25 2.13 Pattern matching ......................................................................................................................................................................................................................... 26 2.14 Configuration settings .................................................................................................................................................................................................................. 28

3 MO COMMANDS ................................................................................................................................................................................................................................. 34 3.1 MO interface (MIB) ........................................................................................................................................................................................................................ 34 3.2 The MOM ....................................................................................................................................................................................................................................... 37 3.3 MOM command ............................................................................................................................................................................................................................. 38 3.4 lt and pr command ......................................................................................................................................................................................................................... 60 3.5 MO addressing .............................................................................................................................................................................................................................. 63

3.5.1 proxy id(s) ............................................................................................................................................................................................................................... 63 3.5.2 mo-filter ................................................................................................................................................................................................................................... 65 3.5.3 mo group and board group ..................................................................................................................................................................................................... 75

3.6 get commands ............................................................................................................................................................................................................................... 75 3.7 Complete MOM ............................................................................................................................................................................................................................. 85 3.8 st command ................................................................................................................................................................................................................................... 89 3.9 set command ................................................................................................................................................................................................................................. 94 3.10 rset command ............................................................................................................................................................................................................................ 113 3.11 bl/deb command ........................................................................................................................................................................................................................ 115 3.12 cr command ............................................................................................................................................................................................................................... 118 3.13 acl/acc command ...................................................................................................................................................................................................................... 119

3.13.1 List actions .......................................................................................................................................................................................................................... 119 3.13.2 Execute an action: .............................................................................................................................................................................................................. 121

Finn Magnusson 2011-07-10 rev PA36 1/527)

3.14 del/rdel command ...................................................................................................................................................................................................................... 128 3.15 undo commands ........................................................................................................................................................................................................................ 134 3.16 run command ............................................................................................................................................................................................................................. 144 3.17 trun command ............................................................................................................................................................................................................................ 145 3.18 al command ............................................................................................................................................................................................................................... 146 3.19 MO commands in offline mode ................................................................................................................................................................................................. 149

4 PM COMMANDS ................................................................................................................................................................................................................................ 155 4.1 PM Interface ................................................................................................................................................................................................................................ 155 4.2 Counter-based measurements ................................................................................................................................................................................................... 157

4.2.1 View the pm counters description - pmom command ......................................................................................................................................................... 157 4.2.2 Reading counter values from ROP files - pmx command ................................................................................................................................................... 163 4.2.3 Reading KPI values from ROP files - pmr command .......................................................................................................................................................... 174 4.2.4 Faulty counter values ........................................................................................................................................................................................................... 196 4.2.5 PM commands in offline mode ............................................................................................................................................................................................. 197 4.2.6 Reading instantaneous counter values - pget/pdiff commands .......................................................................................................................................... 201 4.2.7 Scanner commands ............................................................................................................................................................................................................. 204

4.3 Event-based measurements ....................................................................................................................................................................................................... 209 4.3.1 Viewing the list of events - emom command ....................................................................................................................................................................... 209 4.3.2 Event ROP file fetching and parsing - pme command ........................................................................................................................................................ 210 4.3.3 Scanner handling commands .............................................................................................................................................................................................. 212

5 LOG COMMANDS .............................................................................................................................................................................................................................. 219 5.1 LOG Interface .............................................................................................................................................................................................................................. 219 5.2 Alarm and Event history .............................................................................................................................................................................................................. 223 5.3 Restart and upgrade history ........................................................................................................................................................................................................ 227 5.4 Command history ........................................................................................................................................................................................................................ 236 5.5 Format options ............................................................................................................................................................................................................................. 242 5.6 LG command in offline mode ...................................................................................................................................................................................................... 250

6 OFFLINE MODE ................................................................................................................................................................................................................................. 252 6.1 Collecting offline dumps .............................................................................................................................................................................................................. 252 6.2 Connecting to offline dumps, available commands in offline mode ........................................................................................................................................... 253 6.3 Offline mode against CV/db.dat .................................................................................................................................................................................................. 258

7 NODE INVENTORY COMMANDS .................................................................................................................................................................................................... 275 7.1 CPP HW architecture .................................................................................................................................................................................................................. 275

7.1.1 Board types .......................................................................................................................................................................................................................... 275 7.1.2 Processor types .................................................................................................................................................................................................................... 276 7.1.3 Subrack structure ................................................................................................................................................................................................................. 277 7.1.4 Inter Subrack connections .................................................................................................................................................................................................... 279 7.1.5 Internal addressing of the processors .................................................................................................................................................................................. 282

7.2 HW/SW mapping to MO .............................................................................................................................................................................................................. 286 7.3 inv command ............................................................................................................................................................................................................................... 302

7.3.1 Example: RNC3810 (standard subrack) .............................................................................................................................................................................. 303


7.3.2 Example: RNC3820 (High Performance Subrack) .............................................................................................................................................................. 308 7.3.3 Example: MGW GMPv3 (standard subrack) ....................................................................................................................................................................... 311 7.3.4 Example: RBS3206 .............................................................................................................................................................................................................. 318 7.3.5 Example: RBS6201 LTE ...................................................................................................................................................................................................... 322 7.3.6 Filtering the output ................................................................................................................................................................................................................ 324

7.4 bo command ................................................................................................................................................................................................................................ 327 7.5 cab command .............................................................................................................................................................................................................................. 330

7.5.1 Example: RNC ...................................................................................................................................................................................................................... 330 7.5.2 Example: MGW .................................................................................................................................................................................................................... 333 7.5.3 Example: WRBS ................................................................................................................................................................................................................... 336 7.5.4 Example: ERBS .................................................................................................................................................................................................................... 338 7.5.5 Other cab options ................................................................................................................................................................................................................. 339

8 COLI COMMANDS ............................................................................................................................................................................................................................. 342 8.1 OSE shell access ........................................................................................................................................................................................................................ 342 8.2 Inter-processor communication ................................................................................................................................................................................................... 343 8.3 Print the list of processors and their link handler addresses ...................................................................................................................................................... 345 8.4 Running COLI commands on single boards ............................................................................................................................................................................... 349 8.5 Running COLI commands on multiple boards, using board groups .......................................................................................................................................... 355

8.5.1 Example: MGW .................................................................................................................................................................................................................... 356 8.5.2 Example: RNC ...................................................................................................................................................................................................................... 361 8.5.3 Example: WRBS ................................................................................................................................................................................................................... 365 8.5.4 Example: ERBS .................................................................................................................................................................................................................... 371

8.6 Summary ..................................................................................................................................................................................................................................... 374 8.7 COLI Help .................................................................................................................................................................................................................................... 375

8.7.1 Help for the moshell interface to COLI ................................................................................................................................................................................. 375 8.7.2 Help for how to use the board groups .................................................................................................................................................................................. 377 8.7.3 Print the list of COLI commands available in a particular board ......................................................................................................................................... 380 8.7.4 Print help for a COLI command ........................................................................................................................................................................................... 382

8.8 Tracing commands (te/fte) .......................................................................................................................................................................................................... 384 8.9 Target monitor ............................................................................................................................................................................................................................. 410

8.9.1 TCP Mode ............................................................................................................................................................................................................................ 410 8.9.2 UDP Mode ............................................................................................................................................................................................................................ 416

8.10 File handling commands ........................................................................................................................................................................................................... 418 8.11 Summary of COLI wrapper commands .................................................................................................................................................................................... 425 8.12 Running unix commands from moshell prompt ........................................................................................................................................................................ 425

9 SW MANAGEMENT COMMANDS .................................................................................................................................................................................................... 427 9.1 Configuration Version Handling .................................................................................................................................................................................................. 427

9.1.1 CV files and folders .............................................................................................................................................................................................................. 427 9.1.2 CV status .............................................................................................................................................................................................................................. 428 9.1.3 CV handling .......................................................................................................................................................................................................................... 429 9.1.4 CV Rollback .......................................................................................................................................................................................................................... 445


9.1.5 CV Countdown ..................................................................................................................................................................................................................... 447 9.2 Restart Commands ..................................................................................................................................................................................................................... 449

9.2.1 Printing all possible restart actions ...................................................................................................................................................................................... 449 9.2.2 Performing a node restart .................................................................................................................................................................................................... 451 9.2.3 Performing a board restart ................................................................................................................................................................................................... 454 9.2.4 Performing a program restart ............................................................................................................................................................................................... 457

9.3 CPP Licensing ............................................................................................................................................................................................................................. 459 9.3.1 Print licensed features and capacities ................................................................................................................................................................................. 460 9.3.2 Installing a license key on one node .................................................................................................................................................................................... 471 9.3.3 Installing a license key file in many nodes: .......................................................................................................................................................................... 475 9.3.4 Set licensing emergency state ............................................................................................................................................................................................. 475

10 NETWORK HANDLING ................................................................................................................................................................................................................... 478 10.1 Ipdatabase ................................................................................................................................................................................................................................. 478 10.2 Mobatch ..................................................................................................................................................................................................................................... 480

11 DATA COLLECTION AND AUDIT ................................................................................................................................................................................................... 484 11.1 TR/CSR data collection ............................................................................................................................................................................................................. 484 11.2 Parameter audit ......................................................................................................................................................................................................................... 485

11.2.1 Online check ....................................................................................................................................................................................................................... 486 11.2.2 Checking against a customized reference file ................................................................................................................................................................... 489 11.2.3 Offline check ....................................................................................................................................................................................................................... 491 11.2.4 Anlyse results and correct discrepancies .......................................................................................................................................................................... 493 11.2.5 Parameter audit on several nodes at once ........................................................................................................................................................................ 496

11.3 MO dump comparisons ............................................................................................................................................................................................................. 497 11.4 Individual MO comparisons ....................................................................................................................................................................................................... 499

12 CPP O&M INTERFACE ................................................................................................................................................................................................................... 500 12.1 O&M security ............................................................................................................................................................................................................................. 500

12.1.1 Security Level 1: no O&M security ..................................................................................................................................................................................... 501 12.1.2 Security Level 2: corba security, no user id control ........................................................................................................................................................... 502 12.1.3 Security Level 3: corba security, user id control ................................................................................................................................................................ 503 12.1.4 Changing security settings on the node ............................................................................................................................................................................. 504

12.2 O&M connectivity problems ...................................................................................................................................................................................................... 504 12.2.1 Tracing on the O&M interface ............................................................................................................................................................................................ 504 12.2.2 Case 1: moshell hangs at “Trying file=....” ......................................................................................................................................................................... 511 12.2.3 Case 2: CORBA.COMM_FAILURE ................................................................................................................................................................................... 515 12.2.4 Case 3: CORBA.NOT_EXIST ............................................................................................................................................................................................ 517 12.2.5 Case 4: OSE shell and/or file transfer not accessible ....................................................................................................................................................... 523 12.2.6 Case 5: forgotten OSE shell password .............................................................................................................................................................................. 525 12.2.7 Case 6: HTTP not accessible ............................................................................................................................................................................................ 526 12.2.8 Case 7: File not found on HTTP server ............................................................................................................................................................................. 527


1 INTRODUCTION TO CPP O&M

1.1 CPP functional structure

CPP is the Connectivity Packet Platform on which are based the following nodes: RNC, RBS, MGW, RXI.All these nodes have in common the CPP part which handles functionality for core and transport.The application part differs between these nodes and handles the functionality that is specific for each of these nodes.

The following picture shows the different system modules in CPP.


CPP

APPLICATION

Control (Equipment mgmt, SW loading, System upgrade, O&M, Tracing,

Restarts, File system, Operating System, ...)

IP Transport

(Eth., IP, UDP, RLP, SCTP...)

Internal Transport

(Network synch, Atm switch, Ethernet switch)

SS7

(MTP2, MTP3, M3UA, SCCP, ...)

ATM Transport

(ATM, TDM, SDH, PDH, AAL, SAAL)

WCDMA

RNC/RBS

TD-SDMA RNC/RBS

CDMA2000 BSC/RBS

MGW

LTE RBS

Simulators:

corben,3gsim erncsim,mgwsim


1.2 CPP O&M Interfaces

The following O&M services can be accessed in the node: - OSE shell (a.k.a COLI): provides a set of commands on each individual board. Mainly geared towards trouble-shooting, not intended for configuration.

Note: when IP connectivity is not available, the OSE shell can be accessed via the serial port on the central MP (RS232).- File service: for transfer of files between to/from the node (SW files, logfiles, ROP files, etc)- MIB (Managed Information Base): the database containing all the MOs (Managed Objects) of the node. MOs are used for configuration and trouble-

shooting of the resources in the node.- Scanners: the database containing all the Performance Management Scanners of the node. Scanners are used for defining the contents of the

Performance Measurements (i.e. to specify which counters/events shall be logged in the ROP files).

The following protocols are used for accessing these services:- http- unsecure protocols (unencrypted): telnet, ftp, iiop- secure protocols (encrypted): ssh, sftp, ssliop

Whether to use the secure or unsecure protcols will depend on the security level of the node. http is used on all security levels even though it is unsecure. The number in brackets is the TCP port used for each protocol.


CPP NODE

OSE shell (COLI)

File system

MIB

CM (Configuration Mgmt) FM (Fault Mgmt) PM (Performance Mgmt)

HTTP (80) FTP (21) / SFTP (22)

TELNET (23) / SSH (22)

IIOP (56834)

/ SSL IOP (56836)

TCP/IP

Ethernet or IPoverATM

RS232

MoShell/ AMOS

Hyper Terminal

Scanners

2 MOSHELL/AMOS

MoShell/AMOS is an application for O&M of CPP nodes. It is text-based and uses command-line interface. It must be run within a unix shell window.

- moshell is an Ericsson-internal application. It is free for all Ericsson personnel and can be downloaded from http://utran01.epa.ericsson.se/moshell . It can be installed on Solaris, Linux, or Windows. For Windows, a free unix emulation program called cygwin needs to be installed. Moshell installation instruction for all platforms can be found on http://utran01.epa.ericsson.se/moshell/content.php?content.9

- AMOS (Advanced MO Scripting) is the name of the customer version of moshell. It is sold as an optional feature in OSS-RC, available from R5.3 onwards. AMOS is always installed in OSSRC but its usage is controlled by license.


http://utran01.epa.ericsson.se/moshell/content.php?content.9

http://utran01.epa.ericsson.se/moshell

2.1 Moshell installation

Download the installation package from http://utran01.epa.ericsson.se/moshell- put the insta l la t ion package (moshel lXX.z ip) in your home directory- unzip –o moshel lXX.z ip- bash moshel l_ insta l l

Or: Run directly from /vobs/iov/rnc/bin/moshell, using following clearcase rule in the config spec:element /vobs/iov/rnc/bin/moshell/... /main/LATEST

The moshell application is located inside the folder called “moshell”. In this folder, there are other applications such as “mobatch”.

eanzmagn_1 eanzmagn@srld7244:=> ls -l /home/eanzmagn/moshell/

drwxr-xr-x 6 eanzmagn rnd 4096 Feb 5 07:04 commonjars/ (folder containing binary files and jar files)drwxrwxrwx 3 eanzmagn rnd 16384 Feb 20 18:34 jarxml/ (folder containing MOM files and jar files)drwxr-xr-x 8 eanzmagn rnd 4096 Oct 8 01:07 examples/ (example files)

-rwxr-xr-x 1 eanzmagn rnd 31223 Feb 5 07:04 moshell* (the moshell utility)-rwxr-xr-x 1 eanzmagn rnd 12256 Feb 5 07:04 mobatch* (the mobatch utility)-rwxr-xr-x 1 eanzmagn rnd 356176 Feb 5 07:04 README* (moshell user guide, in text format)

-rwxr-xr-x 1 eanzmagn rnd 3946 Feb 5 07:04 momdoc* )-rwxr-xr-x 1 eanzmagn rnd 25491 Feb 5 07:04 restartcollector* )-rwxr-xr-x 1 eanzmagn rnd 4567 Feb 5 07:04 runClient.sh* )-rwxr-xr-x 1 eanzmagn rnd 27244 Jul 23 2005 monitor6054* ) (other utilities)-rwxr-xr-x 1 eanzmagn rnd 1231 Feb 5 07:04 parseline* )-rwxr-xr-x 1 eanzmagn rnd 14181 Feb 5 07:04 swstat* )-rwxr-xr-x 1 eanzmagn rnd 8812 Feb 5 07:04 swup* )

-rwxr-xr-x 1 eanzmagn rnd 1376 Feb 5 07:04 pmDiff* )-rwxr-xr-x 1 eanzmagn rnd 5496 Feb 5 07:04 pmExtract* ) (PM utilities, used by moshell pmr/pmx)-rwxr-xr-x 1 eanzmagn rnd 2692 Feb 5 07:04 pmList* )-rwxr-xr-x 1 eanzmagn rnd 29160 Feb 5 07:04 pmXtab* )

-rwxr-xr-x 1 eanzmagn rnd 646464 Feb 13 23:19 prog.awk* )-rwxr-xr-x 1 eanzmagn rnd 351421 Feb 13 19:32 funcs.awk* ) (source code files)-rwxr-xr-x 1 eanzmagn rnd 32398 Feb 5 07:04 other.awk* )


http://utran01.epa.ericsson.se/moshell

2.2 Opening an moshell session

First open a unix or cygwin terminal window, then type “moshell” followed by the node address. The node address can be any of the following:- an ipaddress: moshel l 10.1.128.17- a DNS name: moshel l rnc11.utran.er icsson.se- a node name defined in the ipdatabase file: moshel l rnc11

In some cases, you may get the following error message: moshel l : command not found

This means that the path where moshell is installed is not known by the system. In that case, moshell should be started by entering its full path, for instance:

/home/user/moshell/moshell rnc11

or

/vobs/iov/rnc/bin/moshell/moshell rnc11

Example:

[~]$ /home/eanzmagn/moshell/moshell rnc11

##################################################################### Welcome to MoShell 7.1b ## Finn Magnusson, Jan Pettersson ## http://utran01.au.ao.ericsson.se/moshell ## Contact: [email protected] ## [email protected] #####################################################################

Checking ip contact... OK

HELP MENU : hBASIC MO COMMANDS : mOTHER MO COMMANDS : nOTHER COMMANDS : oPM COMMANDS : pQUIT : q

RNC11>


2.3 AMOS architecture

Moshell runs in the UAS and communicates as usual with the CPP node.The only difference is at startup, where it initiates communication with the amos request broker process to check the validity of the license and the user’s permissions in TSS. Then, at the end of the session, it writes the list of commands executed into the SM Log.

OSS-RC

Unix Application Server (UAS)

Master Server (MAS)

Moshell (/opt/ericsson/amos/moshell/moshell) CPP Node

CORBA, TELNET, SSH, FTP, HTTP

AmosRequestBroker (/opt/ericsson/amos/lib/amos.jar)

CORBA

TSS SM Log License

2.4 AMOS installation

AMOS is installed on the OSSRC master server under /opt/er icsson/amos/moshel l and this folder is also mounted on the Unix Application Servers (UAS).AMOS should always be run from a UAS in order to not overload the Master Server. The AMOS logs are always stored under /var /opt /er icsson/amos/moshel l_ logf i l es

How to know the OSSRC and AMOS version:


atrcus403{root} # ist_run

|------------------------------------------------------------------------|| IST RUN TOOL OSS: OSSRC_O10_0_Shipment_R1K_CU AOM_901064 R1K | | Installed: 2009-09-24 ||------------------------------------------------------------------------|| || 1 Execute (Install/Upgrade) || || 2 Remove (Deinstall) || || 3 System Status || 4 Create System IPF File || 5 Check IPF File || || ||------------------------------------------------------------------------|| l View latest Log || t Toggle Trace (off) || v Toggle Verbose (off) || q Quit ||------------------------------------------------------------------------|

Enter selection: 3

------------------------------< STATUS MENU >-----------------------------

1 - Print System Status (by product) 2 - CIST System Status 3 - History q - QuitEnter option [1] : 1--------------------------< PRINT SYSTEM STATUS >-------------------------

[main] Name Description Serial No. Status / RState--------------------------------------------------------------------------------------------------------------Ericsson_masterservice ............. OSSRC_O10_0_Shipment_R1K_CU ........ AOM_901064 ......................... INSTALLED / R1K aeh ................................ Sema AUC/EIR Alarm Adaptation ...... APR 901 0091 ....................... INSTALLED / R5C02 aeh_cxc ............................ Sema AUC/EIR Alarm Adaptation ...... CXC 172 2356 ....................... INSTALLED / R5C02 aipcm .............................. Abis over IP Configuration Managemen APR9010167 ......................... INSTALLED / R9G01 aipcm_cxc .......................... Abis over IP Configuration Managemen CXC1123412 ......................... INSTALLED / R9G01 apr_arne ........................... OSSRC ARNE Application ............. APR901972 .......................... INSTALLED / R8B24_EC02


arne_server ........................ OSSRC ARNE Application Server ...... CXC 172 1773 ....................... INSTALLED / R8B24_EC02 nms_arne_modeltrans . . . . . . . . . . . . . . . . OSSRC ARNE Model Trans . . . . . . . . . . . . . CXC 172 5597 ....................... INSTALLED / R8B24_EC02 arne_client_cxc .................... ARNE Client ........................ CXC 172 1774 ....................... INSTALLED / R8B24_EC02 asv ................................ ASVBIN ............................. CXC 172 2407 ....................... INSTALLED / R8D01 asv_cxc ............................ ASVBIN ............................. CXC 172 2407 ....................... INSTALLED / R8D01 axe ................................ AXE Authority Data Delivery Package APR 901 0346 ....................... INSTALLED / R1H01 axe_cxc ............................ AXE Authority Data Delivery Package APR 901 0346 ....................... INSTALLED / R1H01...<cut>... nms_tss_apr ........................ Telecom Security Service ........... APR 901 0003 ....................... INSTALLED / R3G01 nms_tss_server ..................... TSS Server ......................... CXC 1722012 ........................ INSTALLED / R3G01 nms_tss_client ..................... TSS Administrative GUI and CLIs .... CXC 1722013 ........................ INSTALLED / R3G01 nms_umts_apr_amos .................. Advanced MO Scripting Solution ..... APR 901 0253 ....................... INSTALLED / R2E03 nms_umts_moshell ................... MO Shell ........................... CXC 172 4313 ....................... INSTALLED / R2E03 nms_umts_amos ...................... Advanced MO Scripting .............. CXC 172 4314 ....................... INSTALLED / R2E03 nms_umts_apr_arw ................... ARW ................................ APR 901 0035 ....................... INSTALLED / R8F08 nms_umts_arw_reg ................... Add Rbs Wizard function ........... CXC 172 2198 ....................... INSTALLED / R8F08 nms_umts_arw_metadata .............. Add Rbs Wizard metatdata .......... CXC 172 4209 ....................... INSTALLED / R8F08 nms_umts_apr_auditlogs ............. WRAN AuditLogs Script .............. APR 901 935 ........................ INSTALLED / R2D01 nms_umts_auditlogs ................. AuditLogs Script ................... CXC 172 1456 ....................... INSTALLED / R2D01 nms_umts_apr_cabv .................. Ranos Cabinet Viewer ............... APR 901 0111 ....................... INSTALLED / R1K10 nms_umts_cabv ...................... Ranos Cabinet Viewer ............... CXC 172 2425 ....................... INSTALLED / R1K10 nms_umts_apr_car ................... Cell Availability Report ........... APR 901 0039 ....................... INSTALLED / R3A02...<cut>....

How to install a new AMOS package:

Download the new AMOS package (“.pkg” file) from http://at-unix.eei.ericsson.se/view/www_ossrc/vobs/ossrc/del-mgt/html/ and run the installation according to installation instruction in README file

How to upgrade the moshell version in AMOS (unofficial):store the moshell.zip installation package on the masterserverlogin as root into the master server. run the commands:

- unzip moshel lxxx.z ip- bash moshel l_ insta l l - a

2.5 Opening an AMOS session

First open a unix terminal window, then type “moshell” followed by the node address. The node address can be any of the following:- an ipaddress: moshel l 10.1.128.17- a DNS name: moshel l rnc1.utran.er icsson.se- a node name defined in the ipdatabase file: moshel l rnc1- the MeContext of the node (gets translated from the ORNM_CS database of OSSRC): moshel l RNC01

atrcus422{cdiuser} #: amos RNC11


http://at-unix.eei.ericsson.se/view/www_ossrc/vobs/ossrc/del-mgt/html/

__ __ ____ _____ /\ | \/ |/ __ \ / ____| / \ | \ / | | | | (___ / /\ \ | |\/| | | | |\___ \ / ____ \| | | | |__| |____) | /_/ \_\_| |_|\____/|_____/ OSS Framework for MoShell-7.1p $amosrb_pid = 7537

Checking ip contact...OK


RNC11>

All commands are run in the same way as with moshell except the following commands which are disabled:- fset, fget, facc- pcr, pset, pbl, pdeb

An additional process checks every moshell command for permission and license validity.

All moshell utilities (e.g. mobatch) are also available in AMOS.

AMOS documentation:- The AMOS UG, available from OSSRC CPI - The document /opt/ericsson/amos/moshell/UserGuide.pdf in OSS-RC

Differences between AMOS and moshell: - http://utran01.epa.ericsson.se/moshell/forum_viewtopic.php?4.2717


http://utran01.epa.ericsson.se/moshell/forum_viewtopic.php?4.2717

2.6 Online Help

Print moshell command list with “h” command

RNC11> h

----------------------------------- BASIC MO COMMANDS ----------------------------------mom[tcd] Print description of MO classes, CM/FM attributes, actions, enums and structs.lt/ltc[1-9] Load MO tree (full or partial) and build proxy table.lc[1-9]/lcc Load MO tree (full or partial) and build proxy table.lu/llu Unload MOs from MO tree.pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell.ma/lma Add MO(s) to an MO group.mr/lmr Remove an MO group or remove MOs from an MO group (MOs will NOT be deleted, only the group).mp Print all defined MO groups.get/lget Read CM/FM attribute(s) from MO(s).hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).kget/lkget Display CM/FM attributes in exportable printout format.fro/lfro[m] Read MAO data of an MO and/or froid of the MO. Data read from SQL tables motype_r1 and modata_r2.st/lst Print state of MOs (operationalState and administrativeState when applicable).prod Print productData of MO(s).lk/llk View all MO's linked to an MO, and their states (admState and opState).lko/llko The old lk. Messier than lk but supports a wider range of MO classes.set[m]/lset[m] Set an attribute value on one or several MO's.rset/lrset Set attribute value on a restricted attribute or change the MOid of an MO.bl[s]/lbl[s] Lock or soft-lock MO(s).deb/ldeb Unlock MO(s).acl/lacl Lists available MO actions.acc/lacc Execute an MO action.cr Create an MO.del/ldel Delete MO(s).rdel/lrdel Delete MO(s) together with children and reserving MOs.u+[s]/u-/u?/u! Handling of undo mode (for undo of del/rdel/set commands). Can be used for generation of MO scripts as well.run Run a command file in moshell format.trun[i] Run a command file in EMAS/MoTester format.ctrl-z Abort an MO command or a "for" loop. Type "touch /tmp/<stopfile>;fg" to resume the moshell session.pol[s][h][c][u] Poll the node until the MO service is up or until an operation has completed.re[i] Disconnect and reconnect to the CM service (mobrowser) and/or the PM service (pmtester).getmom Check the MOM version currently stored on the node.parsemom Parse an xml MOM file.flt/fltc Load proxys for an MO type that is not defined in the MOM. ("Force" lt/ltc).ld Load one MO from the tree and add to the proxy table.fget/lfget Read attributes that are not described in the MOM ("Force" get).


sget/lsget Read CM/FM attributes from MO(s), one by one ("Slow" get).fset/lfset Set an attribute that is not described in the MOM ("Force" set).facc/lfacc Perform actions that are not defined in the MOM ("Force" action).----------------------------------- OTHER MO COMMANDS ----------------------------------cvls/cvmk/cvms/cvset/cvrm/cvcu/cvget/cvls1 CV backup handling: list, make local, make remote, remove, setstartable.inv[hr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.cab[slxradgtm] Display of miscellaneous COLI printouts relating to hw, sw, restarts, leds, cpu load, errors, disk/ram usagestc[p][r] Display state and configuration of AtmCrossConnections.std Display state and configuration of devices (RNC and MGW only).stv[b][r] Display state, user, and bandwidth usage for ATM ports and channels.stt[r] Display state and user of Physical Ports and Ds0Bundles.hc Run a general healthcheck on the node.dcg[msie] Fetch data for CSRs, according to the Data Collection Guidelines.diff/ldiff Parameter auditing or MO dump comparisons.str[12ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).lki Resource usage and configuration of IubLinks (RNC only).remod[u][2] Remodule an IubLink (RNC only).tg[r][c][d] Print Resource Object information for all MOs in LmCell (RNC only).uer[d][t] Print UE context data (serving or drifting) for all active calls (RNC only).ced[h][r] Print dynamic cell data or capacity usage (RNC only).al[atkc] Print the list of active alarms. Acknowledge/Unacknowledge an alarm.lg[aevsyuoldhmircf] Fetching and/or processing of node logs (alarm, event, availability, system, etc)----------------------------------- OTHER COMMANDS ----------------------------------uv Print or change moshell configuration settings (also called "user variables").pv Print scripting variables.!/l Execute a unix command on the PC/workstation.l+[m][m][s][o]/l-/l? Open/close moshell logfiles.ose/coli command Send a COLI command to the node's OSE shell. Type "h ose" for syntax help and "?" to view available commands.bo[r]/ba[swdp]/br[wd]/be[0-50]/bp Manage board groups that can be used for running COLI commands on multiple boards.lh Run COLI commands on all boards of a board group.mon/mon+/mon-/mon? Start/stop/check the target monitor server on the node and/or start the monitor client for one or more board Group(s).sql+/sql-/sql? Start/stop/check the SQL client on the node (CXC1325608).pgu[c][f][r] Program Upgrade. For STP use only, eg, to load black LMs.ftree[f] Recursive listing of a directory on the file system of the node or the workstation.ftget[c]/ftput[c] Transfer files or directories to/from the node, using ftp or sftp.htget Transfer files from the node using http.edit Edit a file on the node.fclean[f|ff|d|e] Removal of obsolete loadmodules OR recursive removal of a directory on the node.hi Print history of moshell commands entered during the current session.lmid[c] Print translation of loadmodule product number or T&E error codes.p/w/pw/b Change moshell prompt and/or window title.prox Toggle display of proxy identities in printout of get <mo> <attribute> command.col Toggle display of colors.ul Toggle display of userlabel in st/lst and pget/lpget printout.conf[bld] Toggle confirmation on various MO commands.


gs/gsg Toggle display of old/new attribute value in set/bl/deb commands.ip2d/d2ip Convert an IP address into the format used in the fRO (sql database) or vice-versa.h2d/d2h Convert an integer to hexadecimal or viceversa.h2b/b2h Convert a binary to hexadecimal or viceversa.wait Specify a delay in hrs, mins, secs, or rops. Similar to the unix "sleep" command (scripting).return Exit from a command file without exiting from moshell (scripting).print Print a line or variable (scripting).alias/unalias Print or define command aliases.q/by/exit/quit Exit moshell.----------------------------------- PM COMMANDS ----------------------------------pmom[acd]/lmom[c] Print description of PM counters (pmom) or log attributes (lmom, CDMA only).pget/lpget Read PM attribute(s) from MO(s).spget/lspget Read PM attribute(s) one by one ("slow pget").hpget[c]/lhpget[c] Read PM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).pdiff/lpdiff Print incrementation of PM attributes.pmx[hfdn] Display counter values, extracted from the statistics ROP files.pmr[ag] Produce PM KPI reports, based on counter values in statistics ROP files and formulas in CPI documentation.pme[fd][cgu] Fetch/decode event ROP files (RNC/RBS only).pst List all PM scanners and their state.pgets[n] Print scanner contents.pcr[cfd]/lpcr[cfd] Create a statistics scanner.pbl Suspend a scanner.pdeb Resume a scanner.pdel Delete a scanner.emom Display list of events available for each kind of event-based scanner.pset[d] Set the contents of an event-based scanner (RNC/RBS only).----------------------------------- HELP CHAPTERS ----------------------------------0 Installation, security, and user settings1 Revision History2 Tutorial3 Command syntax, regular expressions4 Command descriptions5 Lazy6 Scripting7 Utilities8 Server Maintenance9 Offline Mode

Type: - h <command> to view command description, e.g: h pget - h <pattern> to view commands whose description match a string, e.g: h change.*prompt - h <chapter> to view a chapter, e.g: h 3

Check command syntax and command description with “h <command>”


RNC11> h stt

*******************************************************stt[r] [<Filter>] [<stateFilter>]*******************************************************Display state and user of Physical Ports and Ds0Bundles.

Options: - r: to refresh the data (ie. re-read from node).

Arguments: - the first argument matches on the whole line - the second argument matches only the state field ("PUI")

Examples:>> stt ms-26-1 --> print all ports and their users matching ms-26-1>> stt . 0|L --> print all ports and their users who have state disabled or locked

Printout format: - PUI: the first digit represents the state of the PhysicalPort/Ds0Bundle. The second digit (if present) represents the state of the User. The third digit (if present) represents the state of the ImaGroup. L=locked, 1=enabled, 0=disabled. - CG/K.L.M: circuit group and K.L.M (for channelised STM-1)

Example printout RXI:======================================================================================================================Port CG/K.L.M PUI USER======================================================================================================================Subrack=MS,Slot=7,..*,Os155SpiTtp=pp1,Vc4Ttp=1 11 AtmPort=MS-7-1...Subrack=MS,Slot=24,.*,Os155SpiTtp=pp1,Sts1SpeTtp=1,Vt15Ttp=1,T1Ttp=1 1/1.1.1 11 AtmPort=MS-24-1-1-1Subrack=MS,Slot=24,.*,Os155SpiTtp=pp1,Sts1SpeTtp=1,Vt15Ttp=2,T1Ttp=1 1/1.1.2 111 AtmPort=MS-24-ima1Subrack=MS,Slot=24,.*,Os155SpiTtp=pp1,Sts1SpeTtp=1,Vt15Ttp=3,T1Ttp=1 1/1.1.3 111 AtmPort=MS-24-ima1...Example printout MGW:======================================================================================================================Port CG/K.L.M PUI USER======================================================================================================================Subrack=2,Slot=21,.*,Os155SpiTtp=2211,Vc4Ttp=1,Vc12Ttp=2,E1Ttp=1,Ds0Bundle=1 1/1.1.2 11 TdmTermGrp=6...Subrack=2,Slot=25,.*,E1PhysPathTerm=2251,Ds0Bundle=1 11 Mtp2TpItu=1


If the command is not found, it prints a list of commands that contain the word in the command description

OFFLINE> h counter

Following commands match that word in the command description (type "h <command>" for more info on each command):

trun[i] Run a command file in EMAS/MoTester format.stc[p][r] Display state and configuration of AtmCrossConnections.pmom[ac]/lmom[c] Print description of PM counters (pmom) or log attributes (lmom, CDMA only).hpget[c]/lhpget[c] Read PM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).pdiff/lpdiff Print incrementation of PM attributes.pmx[hfdn] Display counter values, extracted from the statistics ROP files.pmr[ag] Produce PM KPI reports, based on counter values in statistics ROP files and formulas in CPI documentation.pgets[n] Print scanner contents.pcr[cfd]/lpcr[cfd] Create a statistics scanner.pbl Suspend a scanner.

2.7 Moshell web


TRAINING MATERIAL

DOWNLOAD LATEST VERSION

USER GUIDE


SEARCH FOR PREVIOUS QUESTIONS

POST A QUESTION

2.8 Prompt and printout header


The prompt shows the node name.A header is printed before each command is executed and shows general info about the node and the session:

- date and time when the command was executed- node ip address- moshell version- MOM version of the node

RNC11> pr 090914-15:56:44 137.58.194.147 7.1u RNC_NODE_MODEL_J_3_45_COMPLETE stopfile=/tmp/26112 =================================================================================== Proxy MO =================================================================================== 0 ManagedElement=1 =================================================================================== Total: 1 MOs

Node name

Date/Time when command was run

Node ip address

Moshell version

MOM version

Relation between the MOM version and the node’s SW release:

RNC11> upido

Node UpgradePackage Release/MOM CppVersionERBS CXP102051/1 L10B (A) ERBS CXP102051/10 L11A (A) ERBS CXP102051/11 L11B (B) ERBS CXP102051/12 L11B (B) ERBS CXP102051/13 L12A (B) MGW CXP9012221 R4.2 MGW CXP9012342 R5.0 MGW CXP9012698 R5.1 MGW CXP9013522 R6.0 RBS CXP9011610 P5 (J) RBS CXP9012073 P6 (K)


RBS CXP9012959 P7 (L) RBS CXP9014346 P7.1/W10 (M)RBS CXP9016141 P7.1/W10 (M)RBS CXP9016868 W10/W11 (M)RBS CXP9016865 W11 (N) RBS CXP9017021 W11 (N) RNC CXP9012014 P5 (G) RNC CXP9012123 P6.0 (H) RNC CXP9012842 P6.1 (J) RNC CXP9012995 P7.0 (K) RNC CXP9013831 P7.1 (K) RNC CXP9014711/1 W10A (L) RNC CXP9014711/2 W10B (L) RNC CXP9014711/3 W11A (M) RNC CXP9014711/4 W11B (M) RXI 12/CXP9010029 P5 (F) RXI 13/CXP9010029 P6 (G) RXI CXP9014021 P7 (H) RXI CXP9016282 W10 (H) RXI CXP9017182 W11 (J)

RNC RBS MGWSW MOM CPP SW MOM CPP SW MOM CPPP4 F 4 P4 H 4 R3 R3 4P5 G 5.1 P5 J 5.1 R4.x R4.x 5.xP6/P6.1 H/J 6/6.1 P6 K 6 R5 R5 6P7/P7.1 K 7 P7 L 7 R6 B 7W10 L 8 W10 M 8 R6.1 B 8

2.9 Environment variables

The “pv” printout shows all environment variables and scripting variables.Environment variables are set by moshell at startup and cannot be changed by the user. They keep some important parameters of the current moshell session (ipaddress of the node, process ID of the session, path to the folder containing logs and temporary logs, etc)Scripting variables look exactly the same as environment variables but can be set by the user for scripting purposes (refer to “Moshell advanced”)

RNC11> pv


$gawk = LANG=C LC_ALL=C /home/eanzmagn/tools/moshell/gawk$uname = CYGWIN_NT-5.0 EGM4A000L5BF77U 1.5.25(0.156/4/2) 2008-06-12 19:34 i686 Cygwin$logdir = /home/eanzmagn/moshell_logfiles/logs_moshell$tempdir = /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20071030-005240_6046$gawk_pid = 6070$nodename = RNC11$ipaddress = 137.58.194.147$moshell_version = 7.1u$momversion = RNC_NODE_MODEL_J_3_45_COMPLETE$momdocnumber = 15554-AXD10503/1$momdocrevision = AU1$cellomomversion = 6.1-LSV20-3

2.10 Command line

The command line uses the Readline library from bash. Here are some of the supported function keys:

• up/down arrow previous/next command in history buffer • right/left arrow move forward/backward one character at a time• Alt-f/Alt-b move forward/backward one word at a time• Ctrl-a/Ctrl-e go to beginning/end of line • backspace/Ctrl-d delete one character backward/forward• Ctrl-u/Ctrl-k erase all characters backward/forward• select or select + ctrl-<insert> copy to clipboard • Ctrl-I or shift-<insert> paste from clipboard

Useful: - by typing the beginning of a command and then use the up/down arrow key, the command completion will only match the commands from history that

start with this string- by typing Ctrl-R , then part of a command and arrow up/down key, the command completion will only match the commands from history that contain

this string

2.11 Session Logging

RNC11> l+

Logging to file: /home/eanzmagn/moshell_logfiles/logs_moshell/sessionlog/070613-143817_RNC11.logFinn Magnusson 2011-07-10 rev PA36 24/527)

RNC11> l-

Log close: /home/eanzmagn/moshell_logfiles/logs_moshell/sessionlog/070613-143817_RNC11.log

l+ appends to the file. To overwrite the file, use “l+o”l+m for mute

MGW1> h l+

*******************************************************l+[m][m][s][o]/l-/l? [<logf i le>]*******************************************************Open/close moshell logfiles.

...<cut>...

Or, to log the whole moshell session:

moshell <node-address> | tee <logfile>

2.12 Command piping

Some moshell commands support redirecting their output to a unix command for on-the-fly post-processing. Examples:

lh all te log read | grep ERRORal | grep UtranCellls -l | sort -nk 2lga | grep -i mtp3

To know whether a moshell command supports piping, check the help. Example:

RNC11> h al

***************************************************************************************al[atkc] [- a|- u <alarm_id>] [|<unixcmds>]***************************************************************************************

RNC11> h lg


***************************************************************************************lg[acdefghi lmnopqrstuvwxyz] [- l <logdirectory| logf i l e | z ip f i l e>] [- m <minustime>] [- p <plust ime>] [- s <startdate>] [- e <enddate>] [- g <boardgroup>] [- n <nodefi l te r>] [|<unixcmds>]***************************************************************************************

But:

RNC11> h get

***************************************************************************************get/lget [<moGroup>|<moFilter>|<proxy(s)>|all] [<attribute-filter>|all] [<value-filter>]***************************************************************************************

Commands that do not support piping usually have built-in filtering, therefore grep should not be needed on those commands.However if post-processing is required then the printouts of the commands can be saved to a logfile and the logfile can be postprocessed separately.

Example: looking for emergency calls in the “uer” printout

l+uerl-! grep -i emergency $logfile

l+get utrancell powerl-! sort -k 3 -n $logfile

2.13 Pattern matching

Unix regular expressions are used frequently in the moshell command syntax, therefore we give a short description here, for those not already familiar with them.Unix regular expressions allow to perform pattern matching on text strings. A regular expression is like a text string but some characters have a special meaning. These characters are called meta-characters.

More info on google “Regular expressions”

Some of the most used meta-characters are:


Dot, star, and plus signs . --> matches any single character * --> matches 0 or more occurences of the previous character + --> matches 1 or more occurences of the previous characterE.g: a* matches nothing, or a or aa or aaa, etc. a+ matches a, or aa, or aaa, etc. .* matches 0 or more occurrences of any character .+ matches 1 or more occurrences of any character

Example: Words to match Regular expressionport110 port120 port230 port..0 or port.*0

Square brackets [] --> matches a character or range of characters inside the brackets [^] --> NOT matching a character or range of characters inside the bracketsE.g: [a-z] matches all letters from a to z [0-9] matches all numbers from 0 to 9 [abe] matches letters a,b, and e [^3] matches any character but not 3

Example: Words to match Regular expressionport110 port120 port230 port[12][1-3]0

Or sign | --> ORE.g: 3|5|6 matches 3 or 5 or 6 utrancell|iublink

Example: Words to match Regular expressionport110 port120 port230 line110 line120 line230 port[12][1-3]0|line[12][1-3]0

Anchor characters ^ --> marks the beginning of the text string


$ --> marks the end of the stringE.g: ûtrancell matches utrancell but not externalutrancell slot=8,pluginunit=1$ â.*4$ matches a string beginning with a and finishing with 4, with any character in the middle

Example: Words to match Regular expressionport110 port120 port230 ^port[12][1- 3]0$

Round brackets, for groupingE.g: cell(11|23|45) matches cell11 or cell23 or cell45 (same as: cell11|cell23|cell45 ) [^(utrancell)] matches any string except a string matching “utrancell”

Example: Words to match Regular expressionport110 port120 port230 line110 line120 line 230 ^(port|line)[12][1-3]0$

Negation ! --> negation (not a real meta-character but treated as a meta-character in moshell)E.g: !utrancell|loadmodule matches any string except a str ing matching “utrancel l ” or “loadmodule”

2.14 Configuration settings

The “uv” printout shows the current values of the “uservariables”, ie. the moshell settings which can be changed by the user.

RNC11> uv

bldebset_confirmation = 1credential = C:/cygwin/home/eanzmagn/tools/moshell/commonjars/host.p12corba_class = 2csnotiflist = availabilitystatusdecoder = /vobs/iov/rnc/bin/decoder.pldefault_mom = /home/eanzmagn/tools/moshell/jarxml/MGW_R2.xmldel_confirmation = 1editor = vi


fast_lh_threshold = 5fast_cab_threshold = 10ftp_port = 21ftp_timeout = 600http_port = 80inactivity_timeout = 43200include_nonpm = 1ip_connection_timeout = 20ip_database = /home/eanzmagn/moshell_logfiles/sitefiles/ipdatabase,/home/eanzmagn/tools/moshell/sitefiles/ipdatabaseip_inactivity_timeout = 45java = /usr/bin/javajarxmldir = /home/eanzmagn/tools/moshell/jarxmlkeepLmList = /d/loadmodules/CXC1326054_R1C01,/d/loadmodules/CXC1326054_R1D01,/c/java/host.p12,/c/java/TaskConfigurationFile.txt,/c/java/OLD_SecurityManagement.prp,/d/loadmodules/CXC33077_R5A08,/c/java/SecurityManagement.prplt_confirmation = 1loginfo_print = 1moscommandlog = 0muteFactor = 100nm_credential = C:/cygwin/home/eanzmagn/ssucredentials.xmlnm_folder = C:/cygwin/home/eanzmagnnode_login = 1print_lmid = 1prompt_color = 1prompt_highlight = 1pm_wait = 25pm_logdir = rset_customlist = AntJumperCable,AntFeederCable,Aal2PathDistributionUnit,Repertoire,Program,TdmtermGrp,XpProgram,DpProgramrt_jar = sa_credential = C:/cygwin/home/eanzmagn/tools/moshell/commonjars/sam.pbesa_password = ********use_complete_mom = 0secure_ftp = 0secure_port = 22secure_shell = 0security_method = 1set_window_title = 1show_colors = 1show_timestamp = 1show_userlabel = 0sls_urls = https://172.31.93.161:8443/ericsson/servlet/sls,https://134.138.65.70:8443/ericsson/servlet/sls sls_username = slssls_password = ********mospace_convert = 1target_monitor_type = 1telnet_port = 23


transaction_timeout = 3600username = moshelluserxmlmomlist = rnc_node_mim.xml,RbsNodeVersion.txt,RbsNode.xml,mmgw_node_mom_limited.xml,mmgwr4_node_mom_open.xml,mgw_node_mom_ro.xml,CelloMOM.xml

The description of each uservariable and default values are shown in the moshell file. See following extract from moshell file:.....<cut>....########################################################################### FOLLOWING SETTINGS ARE CUSTOMIZABLE BY EACH USER.# If changes need to be made to the default values, it is recommended to do it in # one of the following files:# moshell/jarxml/moshellrc (settings will apply to all users)# ~/.moshellrc (settings will apply to own user only)# It's also possible to specify a uservariable on session basis:# at moshell startup with "-v" option# or from within moshell, using the "uv" command##########################################################################

#================================================================================# jarxml directory (to store MOM files and jar files which are fetched from the node)#================================================================================jarxmldir=$moshelldir/jarxml

#================================================================================# Path to java. Java version must be 1.2.2 or higher.#================================================================================java="/usr/bin/java"

#================================================================================# IPDATABASE FILE : to specify node names and node passwords, see example in moshell/examples/ipdatabase# several ipdatabase files can be specified, just separate them with commas.# eg: ip_database=$sitefiledir/ipdatabase,/home/toto/myipdatabase#================================================================================ip_database=$sitefiledir/ipdatabase

#================================================================================# CORBA CLASS:# 1 = vbjorb (secure + unsecure nodes)# 2 = jacorb unsecure# 3 = jacorb secure with SAM credential (uses sa_credential and sa_password)# 4 = jacorb secure with SLS login and dowload of nm_credential # (uses sls_urls, sls_username, sls_password and puts the NM credential in nm_credential)# 5 = jacorb secure with NM credential (uses file located in nm_credential)


#================================================================================corba_class=1

#================================================================================# CORBA SECURITY METHOD:# 1 = uses host credential (only works with corba_class=1)# 2 = uses stand-alone credential (requires java 1.3.1 or higher)#================================================================================security_method=1

#================================================================================# PATH TO HOST CREDENTIAL# This file is required to handle Corba Security method 1# Can be generated by PKS server or found on node (in /c/java/host.p12)# or found in Ranos (in /etc/opt/ericsson/nms_cif_security/certificates/host.p12 )# This file has an unlimited lifetime.#================================================================================credential=$commonjardir/host.p12

#================================================================================# PATH TO STAND-ALONE CREDENTIAL and stand-alone password# This file is required when corba_class=3 or corba_class=1+security_method=2# Can be downloaded from SLS server or with EMAS.# This file has a limited lifetime, set by SLS server.#================================================================================sa_credential=$commonjardir/sam.pbesa_password="oemas"

#================================================================================# PATH TO NETWORK-MODE CREDENTIAL # The path nm_folder indicates the folder where the NM credential will be downloaded when corba_class=4# The path nm_credential indicates the path to the NM credential file that will be used when corba_class=5#================================================================================nm_folder=$HOMEnm_credential=$HOME/ssucredentials.xml

#================================================================================# URLs and login details for SLS (one or more URLs can be given)# If the uservariable sls_urls is empty, moshell will try to find it out by http download of the file /configuration/sls_address.cfg#================================================================================#sls_urls=https://137.58.194.190:8443/sls/servlet/sls,https://137.58.194.191:8443/sls/servlet/slssls_username=slssls_password=sls

#==============================================================================Finn Magnusson 2011-07-10 rev PA36 31/527)

# Default xml-MOM file (in case not stored on node, e.g. MGW)# MGW R2 MOM can be downloaded from http://internal.ericsson.com/page/hub_corenetwork/unit/pdu_ipconnectivity_control/node_mgw/mgw_supply_and_support/plm.html# Click on "release binders". The latest MOM is included in the latest release binder.# MGW R3 MOM can be downloaded from http://mgw.lmf.ericsson.se/projects/r3/system/MGwR3_MOM/# MGW R4 MOM can be downloaded from http://mgw.lmf.ericsson.se/projects/r4/sm/MOM/index_4.1.html# MGW R5 MOM can be downloaded from http://vobs.lmf.ericsson.se/wcs/mmgw/r5/mgwr5_oam_appl_mom/xml_storage/# NOTE: this setting is superceeded by the setting in ~/.moshellrc file.# Please set this variable in ~/.moshellrc instead .# Alternatively, transfer the MOM to the node, into the directory /c/public_html/cello/oe/xml and rename it to CelloMOM.xml# This way, the correct MOM will be used for each node, rather than the default MOM.#==============================================================================default_mom="$jarxmldir/MGW_R2.xml"

#==============================================================================# Prompt highlighting and coloring (1=bold/color, 0=normal)# Problem when using prompt highlight: if the command is longer than the window,# it overwrites the beginning of the line# Prompt highlighting and color can be toggled online using the "b" command.# Note: prompt_color only works when prompt_highlight is turned on#==============================================================================prompt_highlight=1prompt_color=1

#==============================================================================# Set Window Title at startup (0=no, 1=yes)#==============================================================================set_window_title=1

#==============================================================================# Show colors# Can be toggled online with the "col" command.#==============================================================================show_colors=1

#==============================================================================# Show userlabel. To show the userlabel in st/pget printouts.# Can be toggled online with the "ul" command.#==============================================================================show_userlabel=0

#===============================================================================# Telnet/ssh/ftp/sftp username#===============================================================================username=moshelluser


#===============================================================================# OSE-shell/ftp security (1 to use ssh/sftp, 0 to use telnet/ftp)#===============================================================================secure_shell=0secure_ftp=0

#===============================================================================# Timeouts for IP connections (http/telnet/ftp/ssh/sftp), in seconds.# * ip_connection_timeout : Disconnects if the connection couldn't be established within that time.# * ip_inactivity_timeout : Disconnects if no output is received from the server within that time.# * ftp_timeout : Maximum time allowed for ftp/http transfers#===============================================================================ip_connection_timeout=20ip_inactivity_timeout=45ftp_timeout=600

#===============================================================================# Inactivity timeout (in seconds):# Moshell exits if no user input arrives within this time.#===============================================================================inactivity_timeout=108000

#==============================================================================# Http port: 80 for Cello, xx80 for CppEmu where xx is the offset (usually 40)# Telnet port: 23 for Cello, xx23 for CppEmu where xx is the offset (usually 40)# Ftp port: 21 for Cello, xx21 for CppEmu where xx is the offset (usually 40)# Secure port: used for ssh/sftp. a different value can be used in case of RSG port forwardings#==============================================================================http_port=80telnet_port=23ftp_port=21secure_port=22.....<cut>....

Uservariables can be changed in the following way:

a) From “uv” command (the change will only apply for the current session)

RNC11> uv secure_shell

secure_shell = 0


RNC11> uv secure_shell=1

secure_shell=1

b) Using the “-v” option when starting moshell (the change will only apply for the current session)

** NONE ** eanzmagn@srld7243:=> moshell -v secure_shell=1,secure_ftp=1 rnc10

c) By editing the ~/.moshellrc file (the change is permanent but only applies to the user owning this file).

** NONE ** eanzmagn@srld7243:=> cat ~/.moshellrcsecure_shell=1secure_ftp=1use_complete_mom=1

d) By editing the moshell/jarxml/moshellrc file (the change is permanent and applies to all users of this moshell installation).

** NONE ** eanzmagn@srld7243:=> cat moshell/jarxml/moshellrcsecure_shell=1secure_ftp=1use_complete_mom=1

e) By editing the ipdatabase file (whose path is set in the uservariable ip_database, see chapter below).

Note: it is also possible change a uservariable inside the moshell file but it is not recommended since the change will be undone at the next moshell upgrade.

3 MO COMMANDS

3.1 MO interface (MIB)

The Managed Objects (MO) are used to modelize resources in the node so they can be easily accessed by the O&M engineer for configuration, trouble-shooting and performance management purposes. Each MO instance belongs to an “MO Class”, eg: PlugInUnit, Program, AtmPort, etc. An MO Class is used to modelize all resources of the same type.


MOs have attributes that store values used for:- configuration management (eg: administrativestate, externalVci, etc.) . Stored permanently in the database copy on the harddisk.- fault management (eg: availabilityStatus, operationalState, etc.) . Not stored permantenly.- performance management (eg: pmReceivedAtmCells, pmTransmittedAtmCells, etc.). Not stored permanently.

The attribute values can be of the following types: integer, string, boolean, float, moRef, enum, struct, sequence of integer, sequence of string, sequence of boolean, sequence of moRef, sequence of struct, see 3.3.

MO operations

Operation Purpose Related moshell command(s) ProtocolGetChildren To list the LDNs of the MOs currently present in the MIB lt, lc

corba (CM)

GetAttribute To read the value of one or more attribute(s) get, hget, pget, st, prod, inv, etc.CallAction To call an action on an MO acc (acl)SetAttribute To change the value of an attribute (provided it is not restricted or

readonly)set, bl, deb

CreateMO To create an MO crDeleteMO To delete an MO del, rdelSubscribe To subscribe to notifications about changes in the MIB runClient.sh -cGetAlarms List active alarms al

corba (FM)Acknowledge/unacknowledge Acknowledge/unacknowledge an alarm alSubscribe To subscribe to notifications about alarms and events. runClient.sh –a


<<MoClass>> PlugInUnit Attributes Actions

• manualRestart()

• PlugInUnitId

• administrativeState • piuType • userLabel

• operationalState • availabilityStatus • hwTestStatus

• pmProcessorLoad

MO identity attribute

Configuration attributes (read & write)

State attributes (readOnly)

Performance Monitoring attributes (readOnly)

Attribute types: Attribute flags: - string - boolean - long - longlong - float - enumeration - structure - moRef - sequence

- mandatory - restricted - readonly - nonpersistent - nonotification

CREATE MO DELETE MO

GET attribute

SET attribute

(only supported by non-restricted config.

attributes)

CALL action

Attribute types:- string: a string of characters, e.g. userLabel - boolean: true or false, e.g. continuityCheck- long: 32-bit integer (from –231 to 231), e.g. externalVci- longlong: 64-bit integer (from –263 to 263), e.g. nodeUtcTime- float: a number with a decimal point- enumeration: a set of discrete integer values, e.g. operationalState- struct: an attribute consisting of a number of attributes of any of the above types, e.g. productData- moRef: a pointer to another MO, e.g. atmTrafficDescriptorId- sequence: an array of attributes of any of the above types

Attribute flags:- mandatory: the attribute value has to be given when creating the MO


- restricted: the attribute value can only be changed by deleting the MO and re-creating it- readonly: the attribute value is set by the system- nonpersistent: the attribute value is not stored persistently on disk (eg. operationalState, availabilityStatus, etc)- nonotification: changes in the attribute value will not be sent to the client via the notification service

More info in the CPI document “MOM User Guide”

3.2 The MOM

The Managed Object Model (MOM), also called Managed Information Model (MIM), is a document describing for each particular node SW version:- all the different types of MOs (MO classes) - the attributes contained in each MO class- the containment relationships (parents/children) between the MO classes.- the actions supported by each MO class

The MOM is written in UML and can converted to a number of different formats: XML, HTML, WORD, TEXT, etc.

More info in MOM User Guide, available in the CPI (and also on http://utran01.epa.ericsson.se/moshell/training/references/cpp/MOM_UG-revF.html)

The MOM can be browsed from moshell in text format (command “mom/pmom”) or from CPI in html format (http://cpistore.ericsson.se )


http://cpistore.ericsson.se/

http://utran01.epa.ericsson.se/moshell/training/references/cpp/MOM_UG-revF.html

3.3 MOM command

View the MO description:

RNC11> h mom


*******************************************************mom[tcd] [<moclass/struct/enum>|all] [<attribute/action>|all] [<attr-type>|all] [<attr-flags>|all] [<description>]*******************************************************....

RNC11> mom plug

##################################################################################MO Class Attributes/Actions##################################################################################PlugInUnit PlugInUnitId,administrativeState,allowedSeqRestarts,availabilityStatus,greenLed,hwTestResult,hwTestStatus,operationalState,piuGroupNumber,piuType,productType,redLed,reservedBy,userLabel,yellowLed manualRestart,restartThis MO represents a plug-in-unit, that is a board inserted in a slot in a subrack.Before deleting the PlugInUnit MO, administrativeState must be set to LOCKED.----------------------------------------------------------------------------------

View the attributes and actions description:

RNC11> mom plug piutype

########################################################################################MO Class Attribute Type Flags########################################################################################PlugInUnit piuType moRef:PiuType restricted,noNotification,mandatory----------------------------------------------------------------------------------------Reference to an instance of PiuType.****************************************************************************************

RNC11> mom . piutype

###############################################################################################MO Class Attribute Type Flags###############################################################################################Fan piuType moRef:PiuType mandatory-----------------------------------------------------------------------------------------------Reference to an instance of PiuType.***********************************************************************************************PiuType PiuTypeId string restricted,noNotification,mandatory-----------------------------------------------------------------------------------------------The value component of the RDN.It is set automatically during system upgrade.***********************************************************************************************


PlugInUnit piuType moRef:PiuType restricted,noNotification,mandatory-----------------------------------------------------------------------------------------------Reference to an instance of PiuType.***********************************************************************************************Repertoire piuTypeList sequence:moRef-PiuType readOnly,noNotification-----------------------------------------------------------------------------------------------A list containing all PiuType references that has been added to this repertoire.***********************************************************************************************

RNC11> mom plug .

########################################################################################################MO Class Attribute Type Flags########################################################################################################PlugInUnit PlugInUnitId string restricted,noNotification,mandatory--------------------------------------------------------------------------------------------------------Naming attribute value.Set by the operator at create of the MO.********************************************************************************************************PlugInUnit administrativeState enumRef:AdmState --------------------------------------------------------------------------------------------------------The administrative state of the PlugInUnit.The possibility to rollback the setting of this attribute is limited.Default=LOCKED ********************************************************************************************************PlugInUnit allowedSeqRestarts enumRef:SeqRestarts --------------------------------------------------------------------------------------------------------The number of automatic (do not require intervention from a human operator) sequential restarts that are allowed for a PIU. When this number of automatic restarts has been exceeded, the automatic restarting halts and the PIU is faulty marked.The time limit between two restarts is 5 minutes. This means that if the time between two restarts is less then 5 minutes the restarts are counted, otherwise the restart counter is reset.For example, RESTARTS_WITH_WARM means 3 restarts with time limit < 5 minutes are accepted but when the 4:th occurs within 5 minutes the board is considered faulty and an alarm is generated. The attribute specifies the automatic (spontanenous) restart escalation ladder for the board. Example: if the attribute it set to RESTARTS_WITH_COLD the first restart will be of type cold, the second (within five minutes) will be cold_test. The third restart (within five minutes) will fault mark the board.Note! If no value is supplied at creation, a default value, fetched from referred PiuType's attribute 'defAllowedSeqRestarts' will be used.Default=RESTARTS_WITH_WARM ********************************************************************************************************PlugInUnit availabilityStatus enumRef:AvailabilityStatus readOnly,nonPersistent,noNotification--------------------------------------------------------------------------------------------------------


The availability status is used to qualify the operational state. It indicates why the operational state has changed its value to disabled. It is a bit mapped CORBA long, where one or more of the bits may be set. If none of the bits are set then the availability status is considered to be undefined.********************************************************************************************************PlugInUnit hwTestResult string readOnly,noNotification--------------------------------------------------------------------------------------------------------This attribute contains text information from latest performed HW-tests.Default="" ********************************************************************************************************PlugInUnit hwTestStatus enumRef:TestStatus readOnly,noNotification--------------------------------------------------------------------------------------------------------Indicates the status of HW tests.Default=NO_TEST_RESULTS ********************************************************************************************************PlugInUnit operationalState enumRef:OperState readOnly,nonPersistent--------------------------------------------------------------------------------------------------------The operational state is set to 'enabled' when the plug-in-unit has loaded and started its 'Basic' load module.********************************************************************************************************PlugInUnit piuGroupNumber long --------------------------------------------------------------------------------------------------------Indicates which restart group the plug-in unit belongs to.Such a group consists of a number of plug-in units where at least one must be enabled (working) or performing recovery. When all plug-in units in a group are out of function, the node is restarted.Must have a positive value.Zero indicates no group.Range: 0 to 65536, Default=0 ********************************************************************************************************PlugInUnit piuType moRef:PiuType restricted,noNotification,mandatory--------------------------------------------------------------------------------------------------------A reference to an available PiuType at create of a PIU.********************************************************************************************************PlugInUnit productType string readOnly,noNotification--------------------------------------------------------------------------------------------------------This attribute describes the product type and is always set to the value "HW".Default="HW" ********************************************************************************************************PlugInUnit reservedBy sequence:moRef-ManagedObject readOnly,noNotification--------------------------------------------------------------------------------------------------------List of managed objects depending on PlugInUnit********************************************************************************************************PlugInUnit userLabel string --------------------------------------------------------------------------------------------------------Label for free use.Range: 0 to 128, Default="" ********************************************************************************************************


#########################################################################################################MO Class Action ReturnType Parameters#########################################################################################################PlugInUnit manualRestart void 3:restartRank:restartReason:restartInfo:enumRef-RestartRank:enumRef-RestartReason:string---------------------------------------------------------------------------------------------------------Description of the parameters:restartReason: This parameter is mandatory.restartInfo: A free text field where extra information can be added.This parameter is optional. The length of this text field is 0..80.Transaction required = YesReturnType: voidParameter 1: restartRank (enumRef-RestartRank).Parameter 2: restartReason (enumRef-RestartReason). This parameter is mandatory.Parameter 3: restartInfo (string). A free text field where extra information can be added.This parameter is optional. The length of this text field is 0..80.*********************************************************************************************************PlugInUnit restart void 2:restartRank:restartCause:enumRef-RestartRank:enumRef-RestartCause---------------------------------------------------------------------------------------------------------Deprecated: This action should not be used. Use ManualRestart instead.The restartCause can have the following values:1 = restart error2 = restart upgradeThe restartCause piuRestartUpgrade overrides the restartRank value and gives mainly restartRank=warm (or restartRank=refresh in some upgrade situations.Transaction required = YesReturnType: voidParameter 1: restartRank (enumRef-RestartRank).Parameter 2: restartCause (enumRef-RestartCause). *********************************************************************************************************

View the attributes and action list, without description:

RNC11> momd . piuty

################################################################################################MO Class Attribute Type Flags################################################################################################Fan piuType moRef:PiuType mandatoryPiuType PiuTypeId string restricted,noNotification,mandatory


PlugInUnit piuType moRef:PiuType restricted,noNotification,mandatoryRepertoire piuTypeList sequence:moRef-PiuType readOnly,noNotification

RBS> momd . restart

####################################################################################################MO Class Action ReturnType Parameters####################################################################################################AuxPlugInUnit restartAuxUnit void 0Fan restartFan void 1:restartCause:enumRef-RestartCauseHwUnit restartUnit void 0Jvm restart void 0ManagedElement manualRestart void 3:restartRank:restartReason:restartInfo:enumRef-RestartRank:enumRef-RestartReason:stringPiuDevice manualRestart void 3:restartRank:restartReason:restartInfo:enumRef-RestartRank:enumRef-RestartReason:stringPlugInUnit manualRestart void 3:restartRank:restartReason:restartInfo:enumRef-RestartRank:enumRef-RestartReason:stringProgram restart void 0Spm restart void 0Spu restart void 0

RNC11> momd plug .

################################################################################################MO Class Attribute Type Flags################################################################################################PlugInUnit PlugInUnitId string restricted,noNotification,mandatoryPlugInUnit administrativeState enumRef:AdmState PlugInUnit allowedSeqRestarts enumRef:SeqRestarts PlugInUnit availabilityStatus enumRef:AvailabilityStatus readOnly,nonPersistent,noNotificationPlugInUnit hwTestResult string readOnly,noNotificationPlugInUnit hwTestStatus enumRef:TestStatus readOnly,noNotificationPlugInUnit operationalState enumRef:OperState readOnly,nonPersistentPlugInUnit piuGroupNumber long PlugInUnit piuType moRef:PiuType restricted,noNotification,mandatoryPlugInUnit productType string readOnly,noNotificationPlugInUnit reservedBy sequence:moRef-ManagedObject readOnly,noNotificationPlugInUnit userLabel string


###############################################################################################################MO Class Action ReturnType Parameters###############################################################################################################PlugInUnit manualRestart void 3:restartRank:restartReason:restartInfo:enumRef-RestartRank:enumRef-RestartReason:stringPlugInUnit restart void 2:restartRank:restartCause:enumRef-RestartRank:enumRef-RestartCause

Search for all MOs/attributes/actions based on text in the description part:

RNC11> h mom

*******************************************************mom[tcd] [<moclass/struct/enum>|all] [<attribute/action>|all] [<attr-type>|all] [<attr-flags>|all] [<description>]*******************************************************....

RNC11> momd . . . . frequency

##################################################################################MO Class##################################################################################GsmRelationUtranRelationWcdmaCarrier

#################################################################################################################MO Class Attribute Type Flags#################################################################################################################ExternalGsmCell bandIndicator enumRef:SupportedBands ExternalGsmCell bcchFrequency long mandatoryExternalGsmCell maxTxPowerUl long ExternalGsmCell qRxLevMin long ExternalUtranCell maxTxPowerUl long ExternalUtranCell qRxLevMin long ExternalUtranCell uarfcnDl long mandatoryExternalUtranCell uarfcnUl long mandatoryHandover ifhoAmountPropRepeat long Handover ifhoPropRepeatInterval long Handover interFreqCnhhoPenaltyEcno long


Handover interFreqCnhhoPenaltyRscp long Handover intraFreqCnhhoPenalty long Handover intraFreqCnhhoWeight long Handover maxActiveSet long Handover maxIefMonSubset long Handover selHoSup enumRef:BooleanVals ...<cut>...UtranCell loadSharingMargin long UtranCell maxTxPowerUl long UtranCell qRxLevMin long UtranCell uarfcnDl long mandatoryUtranCell uarfcnUl long mandatoryUtranCell usedFreqThresh2dEcno long UtranCell usedFreqThresh2dRscp long UtranRelation frequencyRelationType enumRef:SupportedFreqRelations readOnlyUtranRelation loadSharingCandidate enumRef:BooleanVals WcdmaCarrier freqBand long restrictedWcdmaCarrier uarfcnDl long restricted,mandatory

RNC11> momd . power|pwr

##############################################################################################################MO Class Attribute Type Flags##############################################################################################################ChannelSwitching downswitchPwrMargin long ChannelSwitching upswitchPwrMargin long ExternalGsmCell maxTxPowerUl long ExternalUtranCell maxTxPowerUl long ExternalUtranCell primaryCpichPower long Fach maxFach1Power long Fach maxFach2Power long Hsdsch hsMeasurementPowerOffset long Pch pchPower long Pch pichPower long PowerControl PowerControlId string restricted,noNotification,mandatoryPowerControl fixedPowerDl long PowerControl fixedRefPower long PowerControl initShoPowerParam long PowerControl pcpichPowerDefault long Rach aichPower long Rach powerOffsetP0 long Rach powerOffsetPpm long UeMeasControl txPowerConnQualMonEnabled enumRef:BooleanVals


UeMeasControl ueTxPowerThresh6a long UeMeasControl ueTxPowerThresh6b long UtranCell bchPower long UtranCell beMarginDlPwr long UtranCell interPwrMax long UtranCell maxPwrMax long UtranCell maxTxPowerUl long UtranCell maximumTransmissionPower long UtranCell minPwrMax long UtranCell minPwrRl long UtranCell primaryCpichPower long UtranCell primarySchPower long UtranCell pwrAdm long UtranCell pwrAdmOffset long UtranCell pwrHyst long UtranCell pwrLoadThresholdDlSpeech structRef:PwrLoadThresholdDlSpeech UtranCell pwrOffset long UtranCell secondarySchPower long

MGW1> momd . . . . licens

##################################################################################MO Class Attributes##################################################################################GcpAssociation GcpAssociationId,availabilityStatus,gcpLocalEndpointMoRef,maxNoOfOutgoingStreams,operationalState,remoteIpAddress1,remoteIpAddress2,remotePortNumber,reservedBy,userLabelLicensing LicensingId,emergencyStateInfo,licenseFileUrl,userLabelPcmService PcmServiceId,reservedBy

##################################################################################MO Class Actions##################################################################################Licensing setEmergencyState,updateLicenseKeyFile

################################################################################################################MO Class Attribute Type Flags################################################################################################################AccessSignalling busyUnitsPra long readOnly,nonPersistent,noNotificationAccessSignalling licenseCapacityPra long readOnly,nonPersistent,noNotificationAccessSignalling licenseStatePra enumRef:StateVals readOnly,nonPersistent,noNotificationAmrWbService licenseCapacityAmrWb long readOnly,nonPersistent,noNotificationAmrWbService licenseStateAmrWb enumRef:StateVals readOnly,nonPersistent,noNotificationCsdGsmFaxService pstnDelay long noNotification


CsdGsmFaxService radioDelay long noNotificationEcRouteParameterSet fixedLevelControl long EcRouteParameterSet networkProbeMode enumRef:NetworkProbeMode G729Service licenseCapacityG729 long readOnly,nonPersistent,noNotificationG729Service licenseStateG729 enumRef:StateVals readOnly,nonPersistent,noNotificationLicensing licenseFileUrl string readOnly,noNotificationMccService mobileCrossTalkControlMode enumRef:MobileCrossTalkControlMode MgwApplication amrWbHigherThresholdAlarm boolean noNotificationMgwApplication amrWbLowerThresholdAlarm boolean noNotificationMgwApplication g729HigherThresholdAlarm boolean noNotificationMgwApplication g729LowerThresholdAlarm boolean noNotificationMgwApplication licenseStateGcpOverSctp enumRef:StateVals readOnly,nonPersistent,noNotificationMgwApplication licenseStateIuOverIp enumRef:StateVals readOnly,nonPersistent,noNotificationMgwApplication licenseStateVoIpGw enumRef:StateVals readOnly,nonPersistent,noNotificationMgwApplication maxNrOfLicMediaStreamChannels long readOnly,nonPersistent,noNotificationMgwApplication mbacCongestionDscpMode enumRef:MbacCongDscpMode noNotificationMgwApplication mbacCongestionDscpValue long MgwApplication mbacLicensingStatus enumRef:LicensingStatus readOnly,nonPersistentMgwApplication mbacLostPacketsCalculationMode enumRef:MbacLostPackMode noNotificationMgwApplication mbacMeasurementInterval long MgwApplication mbacMode enumRef:MbacMode MgwApplication mbacThreshold enumRef:MbacThresholdLevel MgwApplication mccLicensingStatus enumRef:LicensingStatus readOnly,nonPersistentMgwApplication nrLicensingStatus enumRef:LicensingStatus readOnly,nonPersistentMgwApplication sccHigherThresholdAlarm boolean noNotificationMgwApplication sccLowerThresholdAlarm boolean noNotificationNrService noiseReductionConfiguration enumRef:NoiseReductionConfMode TdmTermGrp mccMode enumRef:MccMode TdmTermGrp nrMode enumRef:NrMode Vmgw activeGcpTransportLayer enumRef:GcpTransportType

####################################################################################################################################MO Class Action ReturnType Parameters####################################################################################################################################Licensing setEmergencyState void 0Licensing updateLicenseKeyFile void 4:userId:password:ipAddress:sFile:string:string:string:string

##################################################################################Struct StructMember Type##################################################################################EcRouteParameterSetData networkProbeMode enumRef:NetworkProbeModeEcRouteParameterSetData fixedLevelControl longEmergencyInfo state enumRef:EmergencyStatus

##################################################################################


Enum Values##################################################################################EmergencyStatus 0:NEVER_USED, 1:ACTIVE, 2:USE_DEGRADED, 3:ACTIVE_AGAIN, 4:USE_DISABLEDLicensingStatus 0:DISABLED, 1:ENABLEDNrMode 0:NR_OFF, 1:NR_ON

RBS32> momd . . . . licens

##################################################################################################################################MO Class Attribute Type Flags##################################################################################################################################Licensing licenseFileUrl string readOnly NodeBFunction dlGraceTimeLeft long readOnly,nonPersistentNodeBFunction dlLicFractBbPool2 long NodeBFunction dlLimitedByLicenseLevel boolean readOnly,nonPersistentNodeBFunction featureState16Qam enumRef:ActivationVals NodeBFunction featureState64Qam enumRef:ActivationVals NodeBFunction featureStateDlPowerControlEul enumRef:ActivationVals NodeBFunction featureStateDualStackIub enumRef:ActivationVals NodeBFunction featureStateEul2msTti enumRef:ActivationVals NodeBFunction featureStateGrake enumRef:ActivationVals NodeBFunction featureStateHsdpaFlexibleScheduler enumRef:ActivationVals NodeBFunction featureStateMbmsIubEfficiency enumRef:ActivationVals NodeBFunction featureStateStandardizedRet enumRef:ActivationVals NodeBFunction featureStateStandardizedTma enumRef:ActivationVals NodeBFunction flexibleSchedulerOn boolean NodeBFunction licenseCapacityNum40WPowerAmplifiers long readOnly,nonPersistentNodeBFunction licenseCapacityNum60WPowerAmplifiers long readOnly,nonPersistent NodeBFunction licenseCapacityNumCarriers long readOnly,nonPersistent NodeBFunction licenseCapacityNumEulUsers long readOnly,nonPersistent NodeBFunction licenseCapacityNumHsPdschCodes long readOnly,nonPersistent NodeBFunction licenseCapacityNumHsdpaUsers long readOnly,nonPersistent NodeBFunction licenseCapacityRbsChannelElementsDownlink long readOnly,nonPersistent NodeBFunction licenseCapacityRbsChannelElementsUplink long readOnly,nonPersistent NodeBFunction licenseState16Qam enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseState64Qam enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateDlPowerControlEul enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateDualStackIub enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateEnhancedLayer2 enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateEnhancedUplinkIntroduction enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateEul2msTti enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateGrake enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateHsdpaDynamicCodeAllocation enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateHsdpaFlexibleScheduler enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateHsdpaIncrementalRedundancy enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateMbmsIubEfficiency enumRef:StateVals readOnly,nonPersistent


NodeBFunction licenseStateMimo enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateNum40WPowerAmplifiers enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateNum60WPowerAmplifiers enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateNumCarriers enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateNumEulUsers enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateNumHsPdschCodes enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateNumHsdpaUsers enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateRbsChannelElementsDownlink enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateRbsChannelElementsUplink enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateSpecialHwSupport enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateStandardizedRet enumRef:StateVals readOnly,nonPersistent NodeBFunction licenseStateStandardizedTma enumRef:StateVals readOnly,nonPersistent NodeBFunction supportOf16qam boolean NodeBFunction ulGraceTimeLeft long readOnly,nonPersistent NodeBFunction ulLicFractBbPool2 long NodeBFunction ulLimitedByLicenseLevel boolean readOnly,nonPersistent RbsLocalCell cellRange long RbsLocalCell dynamicHsPdschCodeAdditionOn boolean RbsLocalCell eHichMinCodePower long RbsLocalCell featureStateEnhancedLayer2 enumRef:ActivationVals RbsLocalCell featureStateHsdpaDynamicCodeAllocation enumRef:ActivationVals RbsLocalCell featureStateHsdpaIncrementalRedundancy enumRef:ActivationVals RbsLocalCell featureStateMimo enumRef:ActivationVals RbsLocalCell maxNumEulUsers long RbsLocalCell maxNumHsPdschCodes long RbsLocalCell maxNumHsdpaUsers long RbsLocalCell qualityCheckPowerEHich long TpaDevice maxTotalOutputPower long

##################################################################################MO Class Action Parameters##################################################################################Licensing setEmergencyState 0Licensing updateLicenseKeyFile 4:userId:password:ipAddress:sFile:string:string:string:string

##################################################################################Struct StructMember Type##################################################################################EmergencyInfo state enumRef:EmergencyStatus

##################################################################################Enum Values##################################################################################ActivationVals 0:DEACTIVATED, 1:ACTIVATEDEmergencyStatus 0:NEVER_USED, 1:ACTIVE, 2:USE_DEGRADED, 3:ACTIVE_AGAIN, 4:USE_DISABLEDStateVals 0:DISABLED, 1:ENABLED

Distinguish which MO classes belong to CPP and which belong to application


RNC11> h mom

***************************************************************************************mom[aptcdbrflou] [<moclass/struct/enum>] [<attribute/action>] [<attr-type>] [<attr-flags>] [<description>]***************************************************************************************Print description of MO classes, CM/FM attributes, actions, enums and structs.

Regular expressions can be used in the various filters.There are five levels of filtering, as shown in the command syntax.

Options: - "a" : show only the definitions relating to application MOs - "p" : show only the definitions relating to platform MOs (CPP) - "c" : show all the MO classes specified in the filter as well as their children/grandchildren/etc classes. - "t" : show the whole MO tree with parent-children relationships and cardinality. The options o and u can be used to show only the MOs over or under. - "d" : gives a shorter printout, without the description part. - "b" : shows the default attribute values. - "r" : shows the valid attribute value range. - "l" : shows the attribute value lengths. - "f" : shows the attribute flags (only applies when combined with options "b", "r", "l")Some options can be combined, see examples below.

Also the momt command highlights the application MOs in red, see below:

View the MOM tree structure:

RNC11> h mom

*******************************************************mom[tcd] [<moclass/st ruct /enum>|al l ] [<attr ibute/act ion>|al l ] [<attr - type>|al l ] [<attr - f lags>|al l ] [<descr ipt ion>]*******************************************************....

The “momt” command shows:- the containment relations ==> parent-children structure- the cardinality information ==> how many MO instances of each class can be found in the node- which MO classes are systemCreated ==> any instances of these classes are automatically created by the system- which MO classes belong to the CPP part and which belong to the Application part (marked in red color)

RNC11> momt


--------------------------------MO classes under ManagedElement--------------------------------Equipment[1] (systemCreated) Jvm[1] (systemCreated) SpDevicePool[3] (systemCreated) CcDevice[0-75] DcDevice[0-300] PdrDevice[0-17] IpEthPacketDataRouter[0-2] PacketDataRouter[0-8] Subrack[0-9] Fan[0-1] Program[0-] GpsReceiver[0-1] Slot[1-28] (systemCreated) PlugInUnit[0-1]...<cut>...IpOam[1] (systemCreated) Dhcp[1] (systemCreated) Ip[0-1] EthernetLink[0-1] IpAtmLink[0-810] IpRoutingTable[1] (systemCreated) Ospf[0-1] OspfArea[1-4] OspfInterface[0-32]IpSystem[1] (systemCreated) IpAccessAutoConfig[0-32] IpAccessHostEt[0-64] IpSyncRef[0-8] IpAccessHostGpb[0-64] IpAccessHostPool[0-16] IpAccessHostSpb[0-64]ManagedElementData[1] (systemCreated)RncDeployment[1] (systemCreated)RncFunction[1] (systemCreated) CchFrameSynch[1] (systemCreated) CellUpdate[1] (systemCreated) ChannelSwitching[1] (systemCreated) CnOperator[0-4] IuLink[0-32] Ranap[0-1] CpmTransGapPattSeq[4] (systemCreated) DchFrameSynch[0-5]


...<cut>...SwManagement[1] (systemCreated) ConfigurationVersion[1] (systemCreated) LoadModule[0-] PiuType[0-] ReliableProgramUniter[0-] Repertoire[0-] SwAllocation[0-] UpgradePackage[0-] UpgradeTrace[1] (systemCreated)SwitchFabric[1] (systemCreated) InternalLinkGroup[0-31] SwitchInternalLink[0-8] SwitchModule[0-32]SystemFunctions[1] (systemCreated) Licensing[] (systemCreated) RncCapacity[0-] (systemCreated) RncFeature[0-] (systemCreated) LogService[1] (systemCreated) Log[0-] Ncli[1] (systemCreated) PmService[1] (systemCreated) Security[1] (systemCreated) WebServer[1] (systemCreated)TransportNetwork[1] (systemCreated) Aal0TpVccTp[0-2200] Aal1TpVccTp[0-1000] Aal2PathVccTp[0-2000]...<cut>...

RNC11> momt program

--------------------------------MO classes over Program--------------------------------Equipment[1],Subrack[0-9],Fan[0-1],Program[0-]Equipment[1],Subrack[0-9],Slot[1-28],PlugInUnit[0-1],Program[0-]Equipment[1],Subrack[0-9],Slot[1-28],PlugInUnit[0-1],Spu[0-1],Program[0-]Equipment[1],Subrack[0-9],Slot[1-28],PlugInUnit[0-1],EtMfg[0-1],Program[0-]Equipment[1],Subrack[0-9],Slot[1-28],PlugInUnit[0-1],Spu[0-1],Spm[0-5],Program[0-]Equipment[1],Subrack[0-9],Slot[1-28],PlugInUnit[0-1],ExchangeTerminalIp[0-1],Program[0-]Equipment[1],Subrack[0-9],Slot[1-28],PlugInUnit[0-1],Cbu[0-1],TimingUnit[0-1],Program[0-]Equipment[1],Subrack[0-9],Slot[1-28],PlugInUnit[0-1],Cbu[0-1],ExchangeTerminal[1],Program[0-]

--------------------------------Finn Magnusson 2011-07-10 rev PA36 52/527)

MO classes under Program--------------------------------

RNC11> momt pluginunit

--------------------------------MO classes over PlugInUnit--------------------------------Equipment[1],Subrack[0-9],Slot[1-28],PlugInUnit[0-1]

--------------------------------MO classes under PlugInUnit--------------------------------Cbu[0-1] ExchangeTerminal[1] E1PhysPathTerm[0-8] Ds0Bundle[0-31] E3PhysPathTerm[0-2] J1PhysPathTerm[0-8] Ds0Bundle[0-24] Os155SpiTtp[0-4] Sts1SpeTtp[0-3] (systemCreated) Vt15Ttp[28] (systemCreated) T1Ttp[1] (systemCreated) Ds0Bundle[0-24] Sts3CspeTtp[0-1] (systemCreated) Vc3Ttp[0-3] (systemCreated) Vc11Ttp[28] (systemCreated) HgTtp[4] (systemCreated) Ds0Bundle[0-6] Vc4Ttp[0-1] (systemCreated) Vc12Ttp[63] (systemCreated) E1Ttp[1] (systemCreated) Ds0Bundle[0-31] Program[0-] T1PhysPathTerm[0-8] Ds0Bundle[0-24] T3PhysPathTerm[0-2] GeneralProcessorUnit[0-1] FastEthernet[0-1] LoadControl[0-1] MediumAccessUnit[0-1] TimingUnit[0-1] Program[0-]


TuSyncRef[0-2]EtMfg[0-1] GigaBitEthernet[0-1] IpInterface[0-8] Program[0-]ExchangeTerminal[0-1] E1PhysPathTerm[0-8] Ds0Bundle[0-31] E3PhysPathTerm[0-2] J1PhysPathTerm[0-8] Ds0Bundle[0-24] Os155SpiTtp[0-4] Sts1SpeTtp[0-3] (systemCreated) Vt15Ttp[28] (systemCreated) T1Ttp[1] (systemCreated) Ds0Bundle[0-24] Sts3CspeTtp[0-1] (systemCreated) Vc3Ttp[0-3] (systemCreated) Vc11Ttp[28] (systemCreated) HgTtp[4] (systemCreated) Ds0Bundle[0-6] Vc4Ttp[0-1] (systemCreated) Vc12Ttp[63] (systemCreated) E1Ttp[1] (systemCreated) Ds0Bundle[0-31] Program[0-] T1PhysPathTerm[0-8] Ds0Bundle[0-24] T3PhysPathTerm[0-2]ExchangeTerminalIp[0-1] EthernetSwitch[0-1] EthernetSwitchPort[0-7] SwitchPortStp[1] (systemCreated) SwitchStp[1] (systemCreated) InternalEthernetPort[0-1] IpInterface[0-8] Program[0-]GeneralProcessorUnit[0-1] FastEthernet[0-1] LoadControl[0-1] MediumAccessUnit[0-1]Program[0-]Spu[0-1] Program[0-] Spm[0-5]


Program[0-]SwitchCoreUnit[0-1]SwitchExtensionUnit[0-1]TimDevice[0-1]TimingUnit[0-1] Program[0-] TuSyncRef[0-2]

View the description of enum attributes

RNC11> mom plug redled

##########################################################################################################MO Class Attribute Type Flags##########################################################################################################PlugInUnit redLed enumRef:LedStatus readOnly,nonPersis tent ,noNoti f i ca t ion----------------------------------------------------------------------------------------------------------Indicates the fault status of the Auxiliary Plug-in Unit.The following values are possible for this attribute:NOT_AVAILABLE = The LED state is not available at the momentOUT = No faultSTEADY_LIGHT = PIU fault**********************************************************************************************************

RNC11> h mom

*******************************************************mom[tcd] [<moclass/struct/enum >|al l ] [<attr ibute/act ion>|al l ] [<attr - type>|al l ] [<attr - f lags>|al l ] [<descr ipt ion>]*******************************************************

RNC11> mom ledstatus

##################################################################################Enum Values##################################################################################LedStatus 0:NOT_APPLICABLE, 1:NOT_AVAILABLE, 2:OUT, 3:STEADY_LIGHT, 4:SLOW_BLINK, 5:FAST_BLINK, 6:FLICKERING

Enter a second argument in the mom command for more detailed description (or type "h mom" for help).


RNC11> mom ledstatus .

##################################################################################Enum Values##################################################################################LedStatus 0:NOT_APPLICABLE, 1:NOT_AVAILABLE, 2:OUT, 3:STEADY_LIGHT, 4:SLOW_BLINK, 5:FAST_BLINK, 6:FLICKERING----------------------------------------------------------------------------------Possible states for green, yellow and red LEDs. - NOT_APPLICABLE: This MO does not support LED states. - NOT_AVAILABLE: The LED state is not available at the moment. - OUT: Depends on the color of the LED. See the description of the corresponding LED status attribute. - STEADY_LIGHT: Depends on the color of the LED. See the description of the corresponding LED status attribute. - SLOW_BLINK: Depends on the color of the LED. See the description of the corresponding LED status attribute. - FAST_BLINK: Load or test in progress. - FLICKERING: The Plug-in Unit is busy.**********************************************************************************

View the description of struct attributes

RNC11> mom piutype productdata

##################################################################################################################################MO Class Attribute Type Flags##################################################################################################################################PiuType productData structRef:AdminProductData restr ic ted,noNoti f i ca t ion,mandatory----------------------------------------------------------------------------------------------------------------------------------Specifies the product number, short product revision, product name and product information of the plug-in-unit. The production date is not used.Recommended: Exclude the trailing letters in the revision of the PiuType.Example:- R2B = R2 without trailing letter- R2B/3 = R2B/3 in the PiuType- R2B/A = R2 in the PiuType.**********************************************************************************************************************************

RNC11> mom adminproductdata

##################################################################################Struct Members##################################################################################AdminProductData productNumber,productRevision,productName,productInfo,productionDate


----------------------------------------------------------------------------------

Enter a second argument in the mom command for more detailed description

RNC11> mom adminproductdata .

##################################################################################Struct StructMember Type##################################################################################AdminProductData productNumber string----------------------------------------------------------------------------------The product number of the product or document.Examples: ABC 101 001, CXC 123 456, 1/BFD 101 999In the case of UpgradePackage this is the document number of the upgrade package.Range: 1 to 24**********************************************************************************AdminProductData productRevision string----------------------------------------------------------------------------------The revision of the product number.Examples: R1, r1a, R1A02, P7BRange: 1 to 7**********************************************************************************AdminProductData productName string----------------------------------------------------------------------------------A user-friendly name of the product.Range: 1 to 12, Default="" **********************************************************************************AdminProductData productInfo string----------------------------------------------------------------------------------User-friendly information about the product.Range: 0 to 13, Default="" **********************************************************************************AdminProductData productionDate string----------------------------------------------------------------------------------The production date can be represented in two ways.1) The preferable syntax is a four-digit representation of the year, and a two-digit representation of the month and a two-digit representation of the day. The numbers of characters in this case, is eight.Example:199912312) The date can also consist of two digits for the year, followed by the letter W for week and two digits for the number of week. The numbers of characters in this case, is five.Example:99W12


Range: 1 to 8, Default="" **********************************************************************************

Printing attribute default values and ranges:

RNC11> momr aal2path

##################################################################################################################################MO Class Attribute Range##################################################################################################################################Aal2PathDistributionUnit userLabel 0 to 128Aal2PathVccTp aal2PathId 1 to 2147483647Aal2PathVccTp timerCu 1 to 100Aal2PathVccTp userLabel 0 to 128

RNC11> momb aal2path

##################################################################################################################################MO Class Attribute Default##################################################################################################################################Aal2PathVccTp aal2QoSAvailableProfiles 15 (CLASS_A_B_C_D)Aal2PathVccTp administrativeState 1 (UNLOCKED)Aal2PathVccTp alarmReport 2 (ALARM_LOC)Aal2PathVccTp continuityCheck falseAal2PathVccTp counterActivation falseAal2PathVccTp counterMode 6 (PM_MODE_FPM_BR)Aal2PathVccTp nomPmBlocksize 1024 (NOM_PM_BLKSIZE_2_10)Aal2PathVccTp remoteBlockingState 0 (UNDEFINED)Aal2PathVccTp timerCu 10

Printing length of attributes of type sequence:

RNC11> moml

##################################################################################################################################MO Class Attribute Length


##################################################################################################################################Aal2RoutingCase routeList 5Aal2RoutingCase routePriorityList 5ArpMap externalArpMapping 14CnOperator equivalentPlmnIdentities 64CnOperator equivalentPlmnIdentityGroupRef 32CnOperator iphoNetworkRefsGsm 64CnOperator iphoNetworkRefsUtran 64DchMap internalArp 15EthernetSwitch pbitQueueMap 8EthernetSwitchPort pbitQueueMap 8ExternalGsmNetwork aliasPlmnIdentities 30ExternalGsmNetwork reservedBy 4Fan connectedToScu 2IpAccessHostPool ipAccessHostRef 16IpAccessHostPool reservedBy 864IpEthPacketDataRouter reservedBy 16IuLink packetDataRouterRef 10IubLink reservedBy 12IurLink aliasPlmnIdentities 30LocationArea reservedBy 2304ManagedElement healthCheckSchedule 14MbmsCch nonPlMbmsSaRef 7MbmsCch plMbmsSaRef 7MbmsServiceArea reservedBy 2304PacketDataRouter reservedBy 16PdrDevice reservedBy 10PlmnIdentityGroup plmn 64PositioningServiceClass firstAttemptCandidate 3Ranap networkResourceIdentifier 8RncFunction aliasPlmnIdentities 30RncModule reservedBy 72RncModule rpuRefs 10RoutingArea reservedBy 2304ServiceArea reservedBy 2304SpiQosClass reservedBy 23Synchronization syncRefActivity 8Synchronization syncRefPriority 8Synchronization syncRefStatus 8Synchronization syncReference 8UeRcPhyChTfc rcTfi 7UeRcTrCh maxTfSubset 4Ura reservedBy 2304UtranCell accessClassNBarred 16


UtranCell accessClassesBarredCs 16UtranCell accessClassesBarredPs 16UtranCell uraRef 4UtranCell utranCellPosition 45UtranNetwork aliasPlmnIdentities 64UtranNetwork reservedBy 68

3.4 lt and pr command

To connect to the MO interface, we must run the command “lt all”.The command “lt all” reads the list of all MOs currently existing in the MIB and their LDN (Local Distinguished Name).Moshell builds a table containing the list of all MO LDNs and assigns each of them an arbitrary proxy number.This list can be printed with the “pr” command.



RNC11>

RNC11> lt allChecking MOM version...RNC_NODE_MODEL_G_1_4Using MOM version: RNC_NODE_MODEL_G_1_4_COMPLETEParsing MOM (cached): /home/eanzmagn/moshell/jarxml/RNC_NODE_MODEL_G_1_4_COMPLETE.xml.cache .................................Done.Fetching IOR file...Done.**** Welcome to the Simple Mo Browser (version 3.0)!Trying file=/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20060707-231532_7185/ior7185**** Test Construction OK****

Connected to 137.58.194.88 (ManagedElement=1)Connected to 137.58.194.88 (ManagedElement=1)Last MO: 5203. Loaded 5203 MOs. Total: 5204 MOs.


RNC11> pr

===================================================================================Proxy MO=================================================================================== 0 ManagedElement=1 1 ManagedElementData=1 2 SystemFunctions=1 3 SystemFunctions=1,Licensing=1 4 SystemFunctions=1,Licensing=1,RncFeature=HsdpaMobilityPhase2 5 SystemFunctions=1,Licensing=1,RncFeature=HsdpaMobilityPhase1 6 Equipment=1etc.....

The MOs are organised in a hierarchical tree.


MIB

ManagedElement=1

Equipment=1

TransportNetwork=1

Subrack=MS

Slot=1

AtmPort=MS-6-1

Slot=2

Subrack=ES-1

Slot=1

Slot=2

RDN: Slot=2

LDN: ManagedElement=1,Equipment=1,Subrack=MS,Slot=2

MOClass MO Identity

Distinguished names are used for addressing of MOs in the MIB.There are three ways to address an MO. Using:

- RDN, Relative Distinguished Name. Unique name in relation to the nearest parent. Eg: Slot=2. On the left of the ”=” sign is the MO class, on the right is the MO identity. The MO identity is stored in an attribute called “<moclass>Id” (e.g. slotId).The RDN is unique in relation to the nearest parent but not necessarily unique in the node.


- LDN, Local Distinguished Name. Unique name in the node. Eg: ManagedElement=1,Equipment=1,Subrack=MS,Slot=2

- FDN, Full Distinguished Name. Unique name in the network. Eg: SubNetwork=VodafoneUK,SubNetwork=RNS1,MeContext=RBS3,ManagedElement=1,Equipment=1,Subrack=MS,Slot=2

3.5 MO addressing

MO commands allow to perform Configuration Service operations (get, set, action, delete, create).The MOs on which the operation shall be performed are specified in the first field of the MO command. There are several syntaxes possible. Use the “pr” command to try out the different syntaxes and see which MOs will be affected.The “pr” does not perform any operation on the node, it just prints the MO LDNs from the internal proxy table in moshell.

3.5.1 proxy id(s)

==> MO(s) with the given proxy id(s) will be affected.To specify several MO proxies, there are two ways: - Specify each proxy id with a space in betweenExample: pr 0 2 5 --> print MO proxies 0, 2, and 5 - Give a rangeExample: pr 4-10 --> print MO proxies from 4 to 10 pr 10-4 --> print MO proxies from 10 to 4 (reverse order, useful for deleting MOs) acc 10-20 restart ---> restart MOs with proxy 10 to 20

MGW1> h pr

*******************************************************pr/lpr [<moGroup>|<moFilter>|<proxy(s)>]*******************************************************Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell.

Examples: >> pr ==> print all MOs >> pr 0-1000 ==> print MOs with proxy id 0 to 1000 >> lpr slot=10 ==> print all MOs whose LDN match slot=10. This will print the MO slot=10 as well as all its children >> pr !utranrel ==> print all MOs except those whose RDN don’t match "utranrel"


MGW1> pr 3658

===================================================================================Proxy MO=================================================================================== 3658 InteractiveMessaging=1,ImMessageComposition=1800===================================================================================Total: 1 MOs

RNC11> pr 569-577

===================================================================================Proxy MO=================================================================================== 569 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1 570 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322250_R51LX04 571 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322166/3_R51LX02 572 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321407_R51LX02 573 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321409_R51LX02 574 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,SwitchCoreUnit=1 575 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321120_R51HV02 576 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321121_R51GD01 577 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322165/12_R51LX02===================================================================================Total: 9 MOs

RNC11> pr 577-569

===================================================================================Proxy MO=================================================================================== 577 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322165/12_R51LX02 576 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321121_R51GD01 575 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321120_R51HV02 574 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,SwitchCoreUnit=1 573 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321409_R51LX02 572 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321407_R51LX02 571 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322166/3_R51LX02 570 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322250_R51LX04 569 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1===================================================================================Total: 9 MOs

MGW1> pr 3650 3652 3653


===================================================================================Proxy MO=================================================================================== 3650 InteractiveMessaging=1,ImMessageComposition=2107 3652 InteractiveMessaging=1,ImMessageComposition=2105 3653 InteractiveMessaging=1,ImMessageComposition=2104===================================================================================Total: 3 MOs

3.5.2 mo-filter

==> MO(s) whose LDN/RDN match the pattern will be operated upon.If the command starts with "l" then the pattern will match agains the LDN.If the command doesn't start with "l", then the pattern will match against the RDN.Example:

RNC39> pr slot=5

===================================================================================Proxy MO=================================================================================== 6861 Equipment=1,Subrack=ES-5,Slot=5 7718 Equipment=1,Subrack=ES-4,Slot=5 8416 Equipment=1,Subrack=MS,Slot=5 8855 Equipment=1,Subrack=ES-3,Slot=5 9720 Equipment=1,Subrack=ES-2,Slot=510169 Equipment=1,Subrack=ES-1,Slot=5===================================================================================Total: 6 MOs

RNC39> pr ms,slot=5

===================================================================================Proxy MO=================================================================================== 8416 Equipment=1,Subrack=MS,Slot=5===================================================================================Total: 1 MOs

RNC39> pr ms,slot=5,plug

===================================================================================


Proxy MO=================================================================================== 8417 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1===================================================================================Total: 1 MOs

RNC39> pr ms,slot=1

===================================================================================Proxy MO=================================================================================== 8055 Equipment=1,Subrack=MS,Slot=13 8131 Equipment=1,Subrack=MS,Slot=16 8211 Equipment=1,Subrack=MS,Slot=11 8266 Equipment=1,Subrack=MS,Slot=14 8395 Equipment=1,Subrack=MS,Slot=12 8430 Equipment=1,Subrack=MS,Slot=10 8494 Equipment=1,Subrack=MS,Slot=1 8506 Equipment=1,Subrack=MS,Slot=19 8585 Equipment=1,Subrack=MS,Slot=18 8609 Equipment=1,Subrack=MS,Slot=17 8648 Equipment=1,Subrack=MS,Slot=15===================================================================================Total: 11 MOs

RNC39> pr ms,slot=1$


RNC39> pr ms,slot=1,

===================================================================================Proxy MO=================================================================================== 8495 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1===================================================================================Total: 1 MOs

RNC39> pr ms,slot=5



RNC39> lpr ms,slot=5

===================================================================================Proxy MO=================================================================================== 8416 Equipment=1,Subrack=MS,Slot=5 8417 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 8418 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1725509_R73D31 8419 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1321794_R73D25 8420 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1727610/3_P3AL03 8421 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1323942_R73D23 8422 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1 8423 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 8424 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,Program=tu2_fpga_lm 8425 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1321121_R73D22 8426 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1729959_R73D80 8427 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1721176_R73D26 8428 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=1 8429 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1727612/3_P3AL03===================================================================================Total: 14 MOs

RNC11> lpr ms,slot=5.*prog

===================================================================================Proxy MO=================================================================================== 1711 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1728703_R9YC05 1712 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1321794_R71AU01 1713 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1725509_R71AZ01 1714 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1725467_R71AZ03 1715 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1725385_R71CD01 1718 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,Program=CXC1321123/2_R71AN05 1720 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1323942_R71AZ02 1721 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1725310_R71CD04 1722 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1725156_R71CD03 1723 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1725501_R71AZ03 1724 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1321121_R71AZ01


1725 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1728701_R9YC05 1726 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1721176_R71CD03===================================================================================Total: 13 MOs

RNC39> lpr ms,slot=5,plug

===================================================================================Proxy MO=================================================================================== 8417 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 8418 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1725509_R73D31 8419 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1321794_R73D25 8420 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1727610/3_P3AL03 8421 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1323942_R73D23 8422 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1 8423 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 8424 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,Program=tu2_fpga_lm 8425 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1321121_R73D22 8426 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1729959_R73D80 8427 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1721176_R73D26 8428 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=1 8429 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1727612/3_P3AL03===================================================================================Total: 13 MOs

RNC39> lpr ms,slot=5,pluginunit=1$


RNC11> pr ms-26-2

===================================================================================Proxy MO=================================================================================== 1212 TransportNetwork=1,AtmPort=MS-26-2===================================================================================Total: 1 MOs


RNC11> lpr ms-26-2

===================================================================================Proxy MO=================================================================================== 1212 TransportNetwork=1,AtmPort=MS-26-2 1213 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40 1214 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1 1215 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc45 1216 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc44 1217 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc43 1218 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc40 1219 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc39 1220 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc38 1221 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc37 1222 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc36 1223 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc35 1224 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc34 1225 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=39===================================================================================Total: 14 MOs

Using regular expressions:

RNC11> pr vcltp=vc45

===================================================================================Proxy MO=================================================================================== 1217 TransportNetwork=1,AtmPort=MS-26-2,VplTp=40,VpcTp=1,VclTp=vc45 1229 TransportNetwork=1,AtmPort=MS-26-2,VplTp=39,VpcTp=1,VclTp=vc45 1241 TransportNetwork=1,AtmPort=MS-26-2,VplTp=38,VpcTp=1,VclTp=vc45 1253 TransportNetwork=1,AtmPort=MS-26-2,VplTp=37,VpcTp=1,VclTp=vc45 1265 TransportNetwork=1,AtmPort=MS-26-2,VplTp=36,VpcTp=1,VclTp=vc45 1277 TransportNetwork=1,AtmPort=MS-26-2,VplTp=35,VpcTp=1,VclTp=vc45 1289 TransportNetwork=1,AtmPort=MS-26-2,VplTp=34,VpcTp=1,VclTp=vc45......

RNC11> lpr AtmPort=MS-26-2,VplTp=40,vpctp=1,vcltp=vc45

===================================================================================Proxy MO===================================================================================


1215 TransportNetwork=1,AtmPort=MS-26-2,VplTp=40,VpcTp=1,VclTp=vc45===================================================================================Total: 1 MOs

RNC11> lpr ms-26-2.*=40.*vc45

===================================================================================Proxy MO=================================================================================== 1215 TransportNetwork=1,AtmPort=MS-26-2 ,VplTp=40,VpcTp=1,VclTp=vc45===================================================================================Total: 1 MOs

RNC11> pr plug

===================================================================================Proxy MO=================================================================================== 11 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 22 Equipment=1,Subrack=MS,Slot=27,PlugInUnit=1 35 Equipment=1,Subrack=MS,Slot=26,PlugInUnit=1 50 Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1 79 Equipment=1,Subrack=MS,Slot=22,PlugInUnit=1 109 Equipment=1,Subrack=MS,Slot=20,PlugInUnit=1 138 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1 167 Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1 181 Equipment=1,Subrack=MS,Slot=17,PlugInUnit=1 195 Equipment=1,Subrack=MS,Slot=16,PlugInUnit=1 215 Equipment=1,Subrack=MS,Slot=15,PlugInUnit=1 235 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1 255 Equipment=1,Subrack=MS,Slot=13,PlugInUnit=1 275 Equipment=1,Subrack=MS,Slot=12,PlugInUnit=1 295 Equipment=1,Subrack=MS,Slot=11,PlugInUnit=1 348 Equipment=1,Subrack=MS,Slot=10,PlugInUnit=1 401 Equipment=1,Subrack=MS,Slot=9,PlugInUnit=1 416 Equipment=1,Subrack=MS,Slot=8,PlugInUnit=1 431 Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1 444 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1 457 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 471 Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1 487 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1===================================================================================Total: 23 MOs


RNC11> lpr Subrack=MS,Slot=1,PlugInUnit=1

===================================================================================Proxy MO=================================================================================== 487 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1 488 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321451_R50HX06 489 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322025_R50HX01 490 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=nsssyci_mpbp 491 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322165/12_R50HX01 492 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,SwitchCoreUnit=1 493 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=nssscb_bp 494 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1322166/2_R50HX01 495 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321407_R50HX01 496 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1,Program=CXC1321409_R50HX01===================================================================================Total: 10 MOs

RNC11> lpr Subrack=MS,Slot=1,PlugInUnit=1$


RNC11> lpr Subrack=MS,Slot=[1-7],PlugInUnit=1$

===================================================================================Proxy MO=================================================================================== 431 Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1 444 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1 457 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 471 Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1 487 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1===================================================================================Total: 5 MOs

RNC11> lpr Subrack=MS,Slot=[147],PlugInUnit=1$

===================================================================================Proxy MO===================================================================================


431 Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1 471 Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1 487 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1===================================================================================Total: 3 MOs

RNC11> lpr Subrack=MS,Slot=[^1].,PlugInUnit=1$

===================================================================================Proxy MO=================================================================================== 11 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 22 Equipment=1,Subrack=MS,Slot=27,PlugInUnit=1 35 Equipment=1,Subrack=MS,Slot=26,PlugInUnit=1 50 Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1 79 Equipment=1,Subrack=MS,Slot=22,PlugInUnit=1 109 Equipment=1,Subrack=MS,Slot=20,PlugInUnit=1===================================================================================Total: 6 MOs

RNC11> pr iublink=1

===================================================================================Proxy MO=================================================================================== 4691 RncFunction=1,IubLink=1 4825 RncFunction=1,IubLink=19 4831 RncFunction=1,IubLink=18 4837 RncFunction=1,IubLink=17 4843 RncFunction=1,IubLink=16 4849 RncFunction=1,IubLink=15 4855 RncFunction=1,IubLink=14 4861 RncFunction=1,IubLink=13 4867 RncFunction=1,IubLink=12 4873 RncFunction=1,IubLink=11 4879 RncFunction=1,IubLink=10===================================================================================Total: 11 MOs

RNC11> pr iublink=1$

===================================================================================Proxy MO=================================================================================== 4691 RncFunction=1,IubLink=1


===================================================================================Total: 1 MOs

RNC11> lpr iublink=1,

===================================================================================Proxy MO=================================================================================== 4692 RncFunction=1,IubLink=1,NbapDedicated=1 4693 RncFunction=1,IubLink=1,NbapCommon=1 4694 RncFunction=1,IubLink=1,NodeSynch=1 4695 RncFunction=1,IubLink=1,NodeSynchTp=2 4696 RncFunction=1,IubLink=1,NodeSynchTp=1===================================================================================Total: 5 MOs

RNC11> lpr iublink=1($|,)

===================================================================================Proxy MO=================================================================================== 4691 RncFunction=1,IubLink=1 4692 RncFunction=1,IubLink=1,NbapDedicated=1 4693 RncFunction=1,IubLink=1,NbapCommon=1 4694 RncFunction=1,IubLink=1,NodeSynch=1 4695 RncFunction=1,IubLink=1,NodeSynchTp=2 4696 RncFunction=1,IubLink=1,NodeSynchTp=1===================================================================================Total: 6 MOs

RNC11> lst iublink=1(,|$)

===================================================================================Proxy Adm State Op. State MO=================================================================================== 4691 1 (ENABLED) RncFunction=1,IubLink=1 4692 0 (LOCKED) 0 (DISABLED) RncFunction=1,IubLink=1,NbapDedicated=1 4693 0 (LOCKED) 0 (DISABLED) RncFunction=1,IubLink=1,NbapCommon=1 4695 0 (LOCKED) 1 (ENABLED) RncFunction=1,IubLink=1,NodeSynchTp=2 4696 0 (LOCKED) 0 (DISABLED) RncFunction=1,IubLink=1,NodeSynchTp=1===================================================================================Total: 5 MOs

RNC11> lbl iublink=1,


============================================================================================================ Id MO AdministrativeState Result============================================================================================================ 4692 IubLink=1,NbapDedicated=1 0 >>> Set. 4693 IubLink=1,NbapCommon=1 0 >>> Set. 4695 IubLink=1,NodeSynchTp=2 0 >>> Set. 4696 IubLink=1,NodeSynchTp=1 0 >>> Set.============================================================================================================Total: 4 MOs attempted, 4 MOs set

The “%” sign used at the beginning of the string is an additional moshell “meta-character” which can be used to specify the MOs in reverse order of their proxy number. This is useful when deleting MOs since the children have to be deleted before the parent.

RNC11> lpr Subrack=MS,Slot=28,PlugInUnit=1

===================================================================================Proxy MO=================================================================================== 11 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 12 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1322165/12_R50HX01 13 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1321407_R50HX01 14 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1321409_R50HX01 15 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,SwitchCoreUnit=1 16 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1321451_R50HX06 17 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1322025_R50HX01 18 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1322166/2_R50HX01 19 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=nsssyci_mpbp 20 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=nssscb_bp===================================================================================Total: 10 MOs

RNC11> lpr %Subrack=MS,Slot=28,PlugInUnit=1

===================================================================================Proxy MO=================================================================================== 20 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=nssscb_bp 19 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=nsssyci_mpbp 18 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1322166/2_R50HX01


17 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1322025_R50HX01 16 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1321451_R50HX06 15 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,SwitchCoreUnit=1 14 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1321409_R50HX01 13 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1321407_R50HX01 12 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1,Program=CXC1322165/12_R50HX01 11 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1===================================================================================Total: 10 MOs

Negative filter:

RNC11> lpr !loadmodule|program==> all MOs except those matching "loadmodule" or "program" will be printed.

3.5.3 mo group and board group

Covered in “moshell Advanced”

3.6 get commands

The “get” command reads the configuration and state attributes (for PM attributes, see “pget”).

RNC11> h get

*******************************************************get/lget [<moGroup>|<moFilter>|<proxy(s)>|all] [<attribute-filter>|all] [<value-filter>]*******************************************************This command fetches one of several attributes from one or several MO's. Doesn't fetch pm attributes; to view pm attributes, use pget/lpget.....

RNC11> get atmport=ms-26-1

=================================================================================================================1405 TransportNetwork=1,AtmPort=MS-26-1=================================================================================================================AtmPortId MS-26-1availabilityStatus 0 (NO_STATUS)


hecCorrectionMode trueoperationalState 1 (ENABLED)userLabel MS-26-1uses Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1,Vc4Ttp=1valueOfLastCellWithUnexp Struct{3} >>> 1.vpi = 23 >>> 2.vci = 45 >>> 3.pti = 0=================================================================================================================Total: 1 MOs

RNC11> pr plug

===================================================================================Proxy MO=================================================================================== 11 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 22 Equipment=1,Subrack=MS,Slot=27,PlugInUnit=1 35 Equipment=1,Subrack=MS,Slot=26,PlugInUnit=1 50 Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1 79 Equipment=1,Subrack=MS,Slot=22,PlugInUnit=1 109 Equipment=1,Subrack=MS,Slot=20,PlugInUnit=1 138 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1 167 Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1 181 Equipment=1,Subrack=MS,Slot=17,PlugInUnit=1 195 Equipment=1,Subrack=MS,Slot=16,PlugInUnit=1 215 Equipment=1,Subrack=MS,Slot=15,PlugInUnit=1 235 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1 255 Equipment=1,Subrack=MS,Slot=13,PlugInUnit=1 275 Equipment=1,Subrack=MS,Slot=12,PlugInUnit=1 295 Equipment=1,Subrack=MS,Slot=11,PlugInUnit=1 348 Equipment=1,Subrack=MS,Slot=10,PlugInUnit=1 401 Equipment=1,Subrack=MS,Slot=9,PlugInUnit=1 416 Equipment=1,Subrack=MS,Slot=8,PlugInUnit=1 431 Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1 444 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1 457 Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 471 Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1 487 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1===================================================================================Total: 23 MOs

RNC11> get 487Finn Magnusson 2011-07-10 rev PA36 76/527)

============================================================================================================487 Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1============================================================================================================PlugInUnitId 1administrativeState 1 (UNLOCKED)allowedSeqRestarts 3 (RESTARTS_WITH_WARM)availabilityStatus 0 (NO_STATUS)hwTestResult 2006-07-07 20:33:18 Others No Test ResultshwTestStatus 0 (NO_TEST_RESULTS)operationalState 1 (ENABLED)piuGroupNumber 8piuType PiuType=ROJ1192108/2_R6productType HWreservedBy [0] = userLabel ============================================================================================================Total: 1 MOs

RNC11> get plug piutype

============================================================================================================MO Attribute Value============================================================================================================Subrack=MS,Slot=28,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6Subrack=MS,Slot=27,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=26,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=23,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=22,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=20,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=19,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=18,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=17,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=16,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=15,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=14,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=13,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=12,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=11,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=10,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2


Subrack=MS,Slot=9,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=8,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=7,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=6,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=5,PlugInUnit=1 piuType PiuType=ROJ1192104/3_R4Subrack=MS,Slot=4,PlugInUnit=1 piuType PiuType=ROJ1192104/3_R4Subrack=MS,Slot=1,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6============================================================================================================Total: 23 MOs

RNC11> get plug piutype ROJ1192108

============================================================================================================MO Attribute Value============================================================================================================Subrack=MS,Slot=28,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6Subrack=MS,Slot=1,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6============================================================================================================Total: 2 MOs

RNC11> get plug piutype !ROJ1192106

============================================================================================================MO Attribute Value============================================================================================================Subrack=MS,Slot=28,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6Subrack=MS,Slot=27,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=26,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=23,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=22,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=20,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=19,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=7,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=6,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=5,PlugInUnit=1 piuType PiuType=ROJ1192104/3_R4Subrack=MS,Slot=4,PlugInUnit=1 piuType PiuType=ROJ1192104/3_R4Subrack=MS,Slot=1,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6============================================================================================================


Total: 12 MOs

RNC11> get plug piutyp|admin

=================================================================================================================MO Attribute Value=================================================================================================================Subrack=MS,Slot=28,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=28,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6Subrack=MS,Slot=27,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=27,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=26,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=26,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=23,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=23,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=22,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=22,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=20,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=20,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=19,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=19,PlugInUnit=1 piuType PiuType=ROJ1192103/2_R6Subrack=MS,Slot=18,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=18,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=17,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=17,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=16,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=16,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=15,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=15,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=14,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=14,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=13,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=13,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=12,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=12,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=11,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=11,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=10,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=10,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=9,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=9,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2Subrack=MS,Slot=8,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=8,PlugInUnit=1 piuType PiuType=ROJ1192106/3_R2


Subrack=MS,Slot=7,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=7,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=6,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=6,PlugInUnit=1 piuType PiuType=ROJ1192102/1_R3Subrack=MS,Slot=5,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=5,PlugInUnit=1 piuType PiuType=ROJ1192104/3_R4Subrack=MS,Slot=4,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=4,PlugInUnit=1 piuType PiuType=ROJ1192104/3_R4Subrack=MS,Slot=1,PlugInUnit=1 administrativeState 1 (UNLOCKED)Subrack=MS,Slot=1,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6=================================================================================================================Total: 23 MOs

RNC11> h hget

*******************************************************hget[c]/lhget[c] <moGroup>|<moFilter>|<proxy(s)> [<attribute-filter>] [<value1-filter>] [<value2-filter>] [<value3-filter>] etc...*******************************************************Similar to "get" but attribute values are printed horizontally, one line per MO (instead of one line per attribute).....

RNC11> hget plug piutype|admin

============================================================================================================MO administrativeState piuType ============================================================================================================Subrack=MS,Slot=28,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192108/2_R6Subrack=MS,Slot=27,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192102/1_R3Subrack=MS,Slot=26,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192102/1_R3Subrack=MS,Slot=23,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192103/2_R6Subrack=MS,Slot=22,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192103/2_R6Subrack=MS,Slot=20,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192103/2_R6Subrack=MS,Slot=19,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192103/2_R6Subrack=MS,Slot=18,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=17,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=16,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=15,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=14,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=13,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=12,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=11,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2


Subrack=MS,Slot=10,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=9,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=8,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192106/3_R2Subrack=MS,Slot=7,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192102/1_R3Subrack=MS,Slot=6,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192102/1_R3Subrack=MS,Slot=5,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192104/3_R4Subrack=MS,Slot=4,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192104/3_R4Subrack=MS,Slot=1,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192108/2_R6============================================================================================================Total: 23 MOs

RNC11> hget plug piutype|admin unlocked !1192106

============================================================================================================MO administrativeState piuType ============================================================================================================Subrack=MS,Slot=28,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192108/2_R6Subrack=MS,Slot=27,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192102/1_R3Subrack=MS,Slot=26,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192102/1_R3Subrack=MS,Slot=23,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192103/2_R6Subrack=MS,Slot=22,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192103/2_R6Subrack=MS,Slot=20,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192103/2_R6Subrack=MS,Slot=19,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192103/2_R6Subrack=MS,Slot=7,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192102/1_R3Subrack=MS,Slot=6,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192102/1_R3Subrack=MS,Slot=5,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192104/3_R4Subrack=MS,Slot=4,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192104/3_R4Subrack=MS,Slot=1,PlugInUnit=1 1 (UNLOCKED) PiuType=ROJ1192108/2_R6============================================================================================================Total: 12 MOs

hget on struct attributes

RNC11> get loadmodule=CXC1325792_R50HC06

=================================================================================================================281 SwManagement=1,LoadModule=CXC1325792_R50HC06


=================================================================================================================LoadModuleId CXC1325792_R50HC06fileFormat rpdoutisDirectory falseloadModuleFilePath /c/loadmodules/CXC1325792_R50HC06loaderType 0 (OseLoader)moppletEntries s[0] = oseProgramHeapSize 0oseProgramLoadClass 200 (coreEarly)oseProgramPoolSize 0otherLoaderName preLoad 0 (no)productData Struct{5} >>> 1.productNumber = CXC1325792 >>> 2.productRevision = R50HC06 >>> 3.productName = licensemanag >>> 4.productInfo = licensemanag >>> 5.productionDate = 20050817programMustBeSingleton falsereliableProgramLabel licencemanagerreservedByUpgradePackage trueuserLabel =================================================================================================================Total: 1 MOs

RNC11> hget loadmodule productdata

=================================================================================================================MO productInfo productName productNumber productRevision productionDate=================================================================================================================LoadModule=CXC1322601_R51EL05 utils CXC1322601 R51EL05 20061023 LoadModule=CXC1321409_R51MM01 spas_sm CXC1321409 R51MM01 20070912 LoadModule=CXC1325608_R51GE03 osa_coli CXC1325608 R51GE03 20061023 LoadModule=CXC1324872/4_R51GT02 cma_collecto CXC1324872/4 R51GT02 20061201 LoadModule=CXC1329862_R10AT01 RncLmBdh CXC1329862 R10AT01 20070815 LoadModule=CXC1329878_R9AE01 setup_UeRc CXC1329878 R9AE01 20061010 LoadModule=CXC132868/5_R51EL21 index CXC132868/5 R51EL21 20070720 LoadModule=CXC1323942_R51HG01 nsstu2_bp CXC1323942 R51HG01 20070104 LoadModule=CXC1321120_R51GD01 nssscb_bp CXC1321120 R51GD01 20060927 LoadModule=CXC132868/5_R51EL05 index CXC132868/5 R51EL05 20061023 LoadModule=CXC1324173_R51GG03 PHY MC41 BP load module phymc1bp CXC1324173 R51GG03 20061023


RNC11> hget loadmodule class|type|productdata@name

=================================================================================================================MO loaderType oseProgramLoadClass productName =================================================================================================================LoadModule=CXC1329855_R4J10 0 (OseLoader) 500 (application) RncLmRnsap LoadModule=CXC1329861_R4J09 0 (OseLoader) 500 (application) RncLmCenOm LoadModule=CXC1329861_R4J07 0 (OseLoader) 500 (application) RncLmCenOm LoadModule=CXC1329855_R4J07 0 (OseLoader) 500 (application) RncLmRnsap LoadModule=CXC1325608_R50HX01 0 (OseLoader) 300 (coreLate) osa_coli LoadModule=CXC1329872_R4J01 3 (WebServer) 500 (application) rncClient LoadModule=CXC1329883_R4J05 0 (OseLoader) 500 (application) RncLmCenAgpsLoadModule=CXC1329856_R4G06 0 (OseLoader) 500 (application) RncLmCell LoadModule=CXC1329875/2_R1B01 0 (OseLoader) 600 (upgrade) RncLmFroAue LoadModule=CXC1326355_R2A01 4 (SpmFpgaLoader) 400 (networkAndConnectionHandling) falc_m3_fpgaLoadModule=CXC132868/12_R50HX01 3 (WebServer) 500 (application) oe_cert_packLoadModule=CXC1329877/3_R1C01 99 (Other) 500 (application) RncLmMoDConvLoadModule=CXC1327705_R50HX01 0 (OseLoader) 200 (coreEarly) dbagent LoadModule=CXC1325695_R50EF03 0 (OseLoader) 400 (networkAndConnectionHandling) phyaue ....<cut>....

hget on sequence of structs

RNC49> hget switchport= pbitqu

=================================================================================================================MO pbitQueueMap pbit queue=================================================================================================================Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[8] = Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[0] 0 1 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[1] 1 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[2] 2 1 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[3] 3 1 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[4] 4 2 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[5] 5 2 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[6] 6 3 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[7] 7 3


Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 t[8] = Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 t[0] 0 1 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 t[1] 1 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 t[2] 2 1 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 t[3] 3 1 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 t[4] 4 2 ...<cut>...

RNC49> get 14 vlanmemb

=================================================================================================================Proxy MO Attribute Value================================================================================================================= 14 Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=7 vlanMembership t[256] = >>> Struct[0] has 2 members: >>> 1.egressUntag = false >>> 2.vid = 0 >>> Struct[1] has 2 members: >>> 1.egressUntag = false >>> 2.vid = 0 >>> Struct[2] has 2 members: >>> 1.egressUntag = false >>> 2.vid = 0 >>> Struct[3] has 2 members: >>> 1.egressUntag = false >>> 2.vid = 0 >>> Struct[4] has 2 members: >>> 1.egressUntag = false >>> 2.vid = 0 >>> Struct[5] has 2 members:

RNC49> hget switchport= vlanmembership

=================================================================================================================MO vlanMembership egressUntag vid=================================================================================================================Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[256] = Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[0] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[1] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[2] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[3] false 0


Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[4] false 0 ...<cut>...

RNC49> hget switchport= vlanmembership t.0

=================================================================================================================MO vlanMembership egressUntag vid=================================================================================================================Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[0] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 t[0] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=3 t[0] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=4 t[0] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=5 t[0] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=6 t[0] false 0 Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=7 t[0] false 0 Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 t[0] false 0 Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 t[0] false 0 Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=3 t[0] false 0 Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=4 t[0] false 0 Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=5 t[0] false 0 Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=6 t[0] false 0 Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=7 t[0] false 0 =================================================================================================================Total: 14 MOs

To see all ports where vid is not 0:

RNC49> hget switchport= vlanmembership . . !^0

3.7 Complete MOM

The MOM file that is stored on the node does not contain the Ericsson internal attributes and actions.This means that by default, it is not possible to access the internal attributes and actions from moshell.

To make moshell use the complete MOM, just set the uservariable “use_complete_mom” to 1 or 2.- use_complete_mom=0 means that moshell use the node MOM and thus cannot access the internal Ericsson attributes and actions- use_complete_mom=1 means that moshell automatically downloads the complete MOM from a server or from clearcase (depending on which is

available)


- use_complete_mom=2 means that moshell only uses the complete MOM if it already exists in the “jarxml” folder. This means that the user must manually store the complete MOM in that location. This setting is needed on workstations which do not have access to the Ericsson network.

Warning! The Complete MOM must not be distributed outside of Ericsson !

Example, use_complete_mom is set to 0:

RNC11> uv use_comple

use_complete_mom = 0

RNC11> get rncsystemparam

100308-13:10:14 137.58.194.147 8.0b RNC_NODE_MODEL_K_9_115 stopfile=/tmp/28831=================================================================================================================3245 RncFunction=1,RncSystemParameters=1==================================================================================================================================================================================================================================Total: 1 MOs

Example, use_complete_mom is set to 1:

RNC11> uv use_complete_mom=1

use_complete_mom=1

RNC11> lt all

Checking MOM version...RNC_NODE_MODEL_J_3_45Downloading File from http://utran01.au.ao.ericsson.se/dlmom/dlmom.php?file=RNC_NODE_MODEL_J_3_45_COMPLETE.xml.gz to /home/eanzmagn/jarxml/RNC_NODE_MODEL_J_3_45_COMPLETE.xml.gz ...Done.Using MOM version: RNC_NODE_MODEL_J_3_45_COMPLETEParsing MOM: /home/eanzmagn/jarxml/RNC_NODE_MODEL_J_3_45_COMPLETE.xml.gz ..................................................................................Done.Caching MOM to: /home/eanzmagn/jarxml/RNC_NODE_MODEL_J_3_45_COMPLETE.xml.cache .....Done.Compressing to: /home/eanzmagn/jarxml/RNC_NODE_MODEL_J_3_45_COMPLETE.xml.cache.gz ...Done.Using paramfile /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_J_1_0.txtParsing file /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_J_1_0.txt ....Done.Fetching IOR file...Done.


Connecting to 137.58.194.147:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0_12, jacoms=R51TK08, jacorb=R1E01, jacsec=R1E01)**** Welcome to the Simple Mo Browser (version 3.0)!Trying file=/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20091202-142709_18272/ior18272**** Test Construction OK****

$mobrowser_pid = 18407

Connected to 137.58.194.88 (ManagedElement=1)Connected to 137.58.194.88 (ManagedElement=1)Last MO: 5203. Loaded 5203 MOs. Total: 5204 MOs.

RNC11> get rncsystemparam

100308-13:10:14 137.58.194.147 8.0b RNC_NODE_MODEL_K_9_115_COMPLETE stopfile=/tmp/28831

=================================================================================================================3245 RncFunction=1,RncSystemParameters=1=================================================================================================================RncSystemParametersId 1hsWaitMeasRepT 750tNbapRlAdd 3tNbapRlSetup 4tNbapRlSetupIub 10tNbapRnsapChSwitch4 4tNbapSynchRlReConfig2 10tRnsapRlAdd 4tRnsapRlSetup 5tRnsapRlSetupIur 10tRnsapSynchRlReConfig1 10tRrcActiveSetUpdate 5tRrcChSwitch1 6tRrcChSwitch3 5tRrcEst1 10tRrcRABEst 5tRrcRABRel 6tRrcRel1 1tRrcRel2 1=================================================================================================================Total: 1 MOs


ENB12> momd . . . ericsson

110208-11:22:11 OFFLINE_get 8.0s ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/1932

####################################################################################################################################MO Class Attribute Type Flags####################################################################################################################################BatteryBackup batteryDisconnectTemp long EricssonOnlyCabinet cabinetParameters sequence:long noNotification,EricssonOnlyCabinet cabinetParametersProfileExtended sequence:long noNotification,EricssonOnlyCabinet cabinetParametersProfileStandard sequence:long noNotification,EricssonOnlyCapacityLicenses gracePeriodActivationThreshold long noNotification,EricssonOnlyCapacityLicenses gracePeriodLength long noNotification,EricssonOnlyCapacityLicenses gracePeriodResetThreshold long noNotification,EricssonOnlyCellDeviceSet CellDeviceSetId string restricted,noNotification,mandatory,EricssonOnlyCellDeviceSet availabilityStatus enumRef:AvailabilityStatus readOnly,nonPersistent,EricssonOnlyCellDeviceSet operationalState enumRef:OperState readOnly,nonPersistent,EricssonOnlyCellDeviceSet usageState enumRef:UsageState readOnly,nonPersistent,EricssonOnlyDataRadioBearer dlMaxRetxThreshold long noNotification,EricssonOnlyDataRadioBearer dlPollPDU long noNotification,EricssonOnlyDataRadioBearer headerCompression enumRef:HeaderCompression noNotification,EricssonOnlyDataRadioBearer pelr long noNotification,EricssonOnlyDataRadioBearer rlcMode enumRef:RlcMode noNotification,EricssonOnlyDataRadioBearer tPollRetransmitDl long noNotification,EricssonOnlyDataRadioBearer tPollRetransmitUl long noNotification,EricssonOnlyDataRadioBearer tReorderingDl long noNotification,EricssonOnlyDataRadioBearer tReorderingUl long noNotification,EricssonOnlyDataRadioBearer tStatusProhibitDl long noNotification,EricssonOnlyDataRadioBearer tStatusProhibitUl long noNotification,EricssonOnlyDataRadioBearer ulMaxRetxThreshold long noNotification,EricssonOnlyDataRadioBearer ulPollPDU long noNotification,EricssonOnlyEUtranCellFDD activeMtdMeasurements sequence:long readOnly,nonPersistent,noNotification,EricssonOnlyEUtranCellFDD cellSimulated boolean noNotification,EricssonOnlyEUtranCellFDD dlCyclicPrefix enumRef:DlCyclicPrefix noNotification,EricssonOnlyEUtranCellFDD noOfUsedTxAntennas long readOnly,nonPersistent,noNotification,EricssonOnlyEUtranCellFDD nrOfRaPreambles long noNotification,EricssonOnly

If the moshell is installed on a network that has no contact with the utran01 server, then the complete MOM should be fetched manually while connected to the Ericsson network, this can be done with the getmom command, e.g:

OFFLINE> getmom RBS_NODE_MODEL_S_1_10_COMPLETE

Downloading File from http://utran01.au.ao.ericsson.se/dlmom/dlmom.php?file=RBS_NODE_MODEL_S_1_10_COMPLETE.xml.gz to /home/eanzmagn/jarxml/RBS_NODE_MODEL_S_1_10_COMPLETE.xml.gz ...Done.MOM version RBS_NODE_MODEL_S_1_10_COMPLETE has been stored in /home/eanzmagn/jarxml/RBS_NODE_MODEL_S_1_10_COMPLETE.xml.gz


Then, the complete MOM can be stored in the jarxml folder on the workstation and the moshell setting “use_complete_mom=2” should be used, which means that moshell will not try to download the complete MOM from the utran01 server, just use the local version.

3.8 st command

RNC11> h st

*******************************************************st/lst [<moGroup>|<moFilter>|<proxy(s)>|all] [<state-filter>]*******************************************************This command prints administrative state and operational state of MO's. It is similar to writing "get/lget <mo> state", the only difference is that it presents the two states side-by-side in a more visible way.The state filter matches towards both the Operational state and the Administrative state.....

RNC11> st plug

===================================================================================Proxy Adm State Op. State MO=================================================================================== 11 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 22 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=27,PlugInUnit=1 35 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=26,PlugInUnit=1 50 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1 79 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=22,PlugInUnit=1 109 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=20,PlugInUnit=1 138 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1 167 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1 181 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=17,PlugInUnit=1 195 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=16,PlugInUnit=1 215 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=15,PlugInUnit=1 235 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1 255 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=13,PlugInUnit=1 275 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=12,PlugInUnit=1 295 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=11,PlugInUnit=1 348 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=10,PlugInUnit=1 401 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=9,PlugInUnit=1 416 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=8,PlugInUnit=1 431 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1 444 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1 457 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1


471 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1 487 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1===================================================================================Total: 23 MOs

RNC11> st atmport

===================================================================================Proxy Adm State Op. State MO=================================================================================== 1212 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-2 1405 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1 2203 0 (DISABLED) TransportNetwork=1,AtmPort=MS-7-2 2204 0 (DISABLED) TransportNetwork=1,AtmPort=MS-7-1 2223 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-2 2225 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1 2484 1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-2 2497 1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1===================================================================================Total: 8 MOs

RNC11> st atmport=ms-6-1

===================================================================================Proxy Adm State Op. State MO=================================================================================== 2227 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1===================================================================================Total: 1 MOs

RNC11> lst atmport=ms-6-1

===================================================================================Proxy Adm State Op. State MO=================================================================================== 2225 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1 2226 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1 2227 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1 2228 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr3Gtpu2 2229 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr3Gtpu1 2230 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr5Gtpu2 2231 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr5Gtpu1 2232 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc99 2233 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc98 2234 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc97


2235 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc96 2236 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc95 2237 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc94 2238 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc93 2239 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc92 2240 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc91 2241 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc90 2242 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc50 2243 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc34 2244 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr2Gtpu2 2245 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr2Gtpu1 2246 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr4Gtpu2 2247 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr4Gtpu1 2248 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc103 2249 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc102 2250 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc101 2251 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=vc100 2252 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr1Gtpu2 2253 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=1,VpcTp=1,VclTp=Pdr1Gtpu1===================================================================================Total: 29 MOs

Showing the userLabel next to the state

MGW1> uv show_userlabel=1

show_userlabel=1

(or use the command “ul” to toggle the uservariable show_user_label)

MGW1> st tdm

===================================================================================Proxy Adm State Op. State UserLabel MO=================================================================================== 3358 1 (UNLOCKED) 1 (ENABLED) E1_MSC3_Slot25_Port3_TS1-29_31 TdmTermGrp=E1_MSC3_Slot25_Port3_TS1-29_31 3359 1 (UNLOCKED) 1 (ENABLED) E1_MSC3_Slot25_Port4_TS1-29_31 TdmTermGrp=E1_MSC3_Slot25_Port4_TS1-29_31 3361 0 (LOCKED) 0 (DISABLED) E1_BSC8_Slot26_Port1_TS1-29&31 TdmTermGrp=E1_BSC8_Slot26_Port1_TS1-29&31 3362 1 (UNLOCKED) 1 (ENABLED) E1_BSC86_Slot26_Port2_TS1-29&31 TdmTermGrp=E1_BSC86_Slot26_Port2_TS1-29&31 3363 1 (UNLOCKED) 1 (ENABLED) E1_BL_Slot25_Port5_TS1-31 TdmTermGrp=E1_BL_Slot25_Port5_TS1-31 3367 1 (UNLOCKED) 1 (ENABLED) E1_MSC3_Slot25_Port1_TS1-29_31 TdmTermGrp=E1_MSC3_Slot25_Port1_TS1-29_31 3372 0 (LOCKED) 0 (DISABLED) E1_MSC3_Slot25_Port2_TS1-29_31 TdmTermGrp=E1_MSC3_Slot25_Port2_TS1-29_31===================================================================================Total: 7 MOs


Or:

MGW1> hget tdm state|user

=================================================================================================================MO administrativeState operationalState userLabel =================================================================================================================TdmTermGrp=E1_MSC3_Slot25_Port3_TS1-29_31 1 (UNLOCKED) 1 (ENABLED) E1_MSC3_Slot25_Port3_TS1-29_31 TdmTermGrp=E1_MSC3_Slot25_Port4_TS1-29_31 1 (UNLOCKED) 1 (ENABLED) E1_MSC3_Slot25_Port4_TS1-29_31 TdmTermGrp=E1_BSC8_Slot26_Port1_TS1-29&31 0 (LOCKED) 0 (DISABLED) E1_BSC8_Slot26_Port1_TS1-29&31 TdmTermGrp=E1_BSC86_Slot26_Port2_TS1-29&31 1 (UNLOCKED) 1 (ENABLED) E1_BSC86_Slot26_Port2_TS1-29&31TdmTermGrp=E1_BL_Slot25_Port5_TS1-31 1 (UNLOCKED) 1 (ENABLED) E1_BL_Slot25_Port5_TS1-31 TdmTermGrp=E1_MSC3_Slot25_Port1_TS1-29_31 1 (UNLOCKED) 1 (ENABLED) E1_MSC3_Slot25_Port1_TS1-29_31 TdmTermGrp=E1_MSC3_Slot25_Port2_TS1-29_31 0 (LOCKED) 0 (DISABLED) E1_MSC3_Slot25_Port2_TS1-29_31 =================================================================================================================Total: 7 MOs

Using the state filter

MGW01> h st

*******************************************************st/lst [<moGroup>|<moFilter>|<proxy(s)>|all] [<state-filter>]*******************************************************Print state of MOs (operationalState and administrativeState when applicable).

MGW01> st tdm

===================================================================================Proxy Adm State Op. State MO=================================================================================== 2387 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=22 2388 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=21 2389 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=20 2390 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=19 2391 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=18 2392 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=16 2393 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=15 2394 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=14 2395 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=13


2396 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=12 2397 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=11 2398 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=10 2404 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=9 2405 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=8 2406 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=7 2407 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=6 2408 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=5 2409 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=4 2410 1 (UNLOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=3 2411 0 (LOCKED) 0 (DISABLED) MgwApplication=1,TdmTermGrp=2 2412 0 (LOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=1 2413 1 (UNLOCKED) 0 (DISABLED) MgwApplication=1,TdmTermGrp=17===================================================================================Total: 22 MOs

MGW01> st tdm 0

===================================================================================Proxy Adm State Op. State MO=================================================================================== 2411 0 (LOCKED) 0 (DISABLED) MgwApplication=1,TdmTermGrp=2 2412 0 (LOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=1 2413 1 (UNLOCKED) 0 (DISABLED) MgwApplication=1,TdmTermGrp=17===================================================================================Total: 3 MOs

MGW01> st tdm ^0

===================================================================================Proxy Adm State Op. State MO=================================================================================== 2411 0 (LOCKED) 0 (DISABLED) MgwApplication=1,TdmTermGrp=2 2412 0 (LOCKED) 1 (ENABLED) MgwApplication=1,TdmTermGrp=1===================================================================================Total: 2 MOs

MGW01> st tdm dis

===================================================================================Proxy Adm State Op. State MO=================================================================================== 2411 0 (LOCKED) 0 (DISABLED) MgwApplication=1,TdmTermGrp=2


2413 1 (UNLOCKED) 0 (DISABLED) MgwApplication=1,TdmTermGrp=17===================================================================================Total: 2 MOs

MGW01> st tdm 1.*0

===================================================================================Proxy Adm State Op. State MO=================================================================================== 2413 1 (UNLOCKED) 0 (DISABLED) MgwApplication=1,TdmTermGrp=17===================================================================================Total: 1 MOs

RNC11> lst !rncfunc 1.*0 (or unlocked.*disabled)

===================================================================================Proxy Adm State Op. State MO=================================================================================== 436 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1 464 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 473 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1===================================================================================Total: 4 MOs

RNC11> st . ^0

===================================================================================Proxy Adm State Op. State MO=================================================================================== 434 0 (LOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2===================================================================================Total: 1 MOs

3.9 set command

“Set” is only allowed on configuration attributes that are not restricted.

RNC11> h set


*******************************************************set[m]/lset[m] <moGroup>|<moFilter>|<proxy(s)> <attribute> [<value>]*******************************************************Sets an attribute on one or several MO's.

Setting an attribute of type Long (Integer) RNC11> set 434 administrativestate 1

============================================================================================================ Id MO administrativeState Result============================================================================================================ 434 Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2 1 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> lset Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2$ administrativeState 0

============================================================================================================ Id MO administrativeState Result============================================================================================================ 434 Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2 0 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

Setting an attribute of type String

RNC11> set 0 userlabel RNC 10

============================================================================================================ Id MO userLabel Result============================================================================================================ 0 ManagedElement=1 RNC 10 >>> Set.============================================================================================================


Total: 1 MOs attempted, 1 MOs set

RNC11> get 0 userlabel

=================================================================================================================MO Attribute Value=================================================================================================================ManagedElement=1 userLabel RNC 10=================================================================================================================Total: 1 MOs

Setting an attribute of type Struct

RNC11> get sid=1 sib1$

=================================================================================================================MO Attribute Value=================================================================================================================Sid=1 sib1 Struct{2} >>> 1.sib1RepPeriod = 32 >>> 2.sib1StartPos = 2=================================================================================================================Total: 1 MOs

RNC11> set sid=1 sib1 sib1repperiod=16

============================================================================================================ Id MO sib1 Result============================================================================================================ 4764 Sid=1 sib1StartPos:i=2,sib1RepPeriod:i=16 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> set sid=1 sib1 sib1repperiod=20,sib1startpos=4


============================================================================================================ Id MO sib1 Result============================================================================================================ 4764 Sid=1 sib1StartPos:i=4,sib1RepPeriod:i=20 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> get sid=1 sib1$

=================================================================================================================MO Attribute Value=================================================================================================================Sid=1 sib1 Struct{2} >>> 1.sib1RepPeriod = 20 >>> 2.sib1StartPos = 4=================================================================================================================Total: 1 MOs

Setting an attribute of type MoRef

RNC11> lget atmport=ms-6-1,vpltp=[^,]+$ atmtraff

=================================================================================================================MO Attribute Value=================================================================================================================AtmPort=MS-6-1,VplTp=1 atmTrafficDescriptor AtmTrafficDescriptor=C1P353000=================================================================================================================Total: 1 MOs

RNC11> pr atmtraff

===================================================================================Proxy MO===================================================================================


1209 TransportNetwork=1,AtmTrafficDescriptor=C1P4528 1694 TransportNetwork=1,AtmTrafficDescriptor=U3P4500M3000 1695 TransportNetwork=1,AtmTrafficDescriptor=C2P4000 1696 TransportNetwork=1,AtmTrafficDescriptor=U4P3500M500 1697 TransportNetwork=1,AtmTrafficDescriptor=C1P9560 1712 TransportNetwork=1,AtmTrafficDescriptor=C2P9050 1725 TransportNetwork=1,AtmTrafficDescriptor=U3P1000M600 1745 TransportNetwork=1,AtmTrafficDescriptor=C2P6800 1968 TransportNetwork=1,AtmTrafficDescriptor=C1P5 1969 TransportNetwork=1,AtmTrafficDescriptor=C2P12000 1974 TransportNetwork=1,AtmTrafficDescriptor=C2P6657 2061 TransportNetwork=1,AtmTrafficDescriptor=C1P2262 2099 TransportNetwork=1,AtmTrafficDescriptor=C1P353000 2100 TransportNetwork=1,AtmTrafficDescriptor=C2P13314 2160 TransportNetwork=1,AtmTrafficDescriptor=U4P30000M500 2163 TransportNetwork=1,AtmTrafficDescriptor=C1P14650 2164 TransportNetwork=1,AtmTrafficDescriptor=C1P1769 2168 TransportNetwork=1,AtmTrafficDescriptor=C1P3538 2169 TransportNetwork=1,AtmTrafficDescriptor=U4P35000M500 2202 TransportNetwork=1,AtmTrafficDescriptor=C2P3000 2220 TransportNetwork=1,AtmTrafficDescriptor=C2P4438 2303 TransportNetwork=1,AtmTrafficDescriptor=U3P66600M5000 2386 TransportNetwork=1,AtmTrafficDescriptor=U3P1000M80 2412 TransportNetwork=1,AtmTrafficDescriptor=U3P1000M67 2423 TransportNetwork=1,AtmTrafficDescriptor=C1P550002432 TransportNetwork=1,AtmTrafficDescriptor=C1P6500

2432 TransportNetwork=1,AtmTrafficDescriptor=C1P65002433 TransportNetwork=1,AtmTrafficDescriptor=C1P350000

===================================================================================Total: 26 MOs

RNC11> lset atmport=ms-6-1,vpltp=[^,]+$ atmTrafficDescriptor AtmTrafficDescriptor=C1P350000

============================================================================================================ Id MO atmTrafficDescriptor Result============================================================================================================ 2226 AtmPort=MS-6-1,VplTp=1 2433 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set


Setting an attribute of type sequence of Long

wrbs075> get feeder atten

=================================================================================================================MO Attribute Value=================================================================================================================AntFeederCable=2A dlAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=2A ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=1A dlAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=1A ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=3A dlAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=3A ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=1B dlAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=1B ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=3B dlAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=3B ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=2B dlAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=2B ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 =================================================================================================================Total: 6 MOs

wrbs075> set antfeeder dlattenuation 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

============================================================================================================ Id MO dlAttenuation Result============================================================================================================ 161 AntFeederCable=2A 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 >>> Set. 171 AntFeederCable=1A 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 >>> Set. 173 AntFeederCable=3A 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 >>> Set. 185 AntFeederCable=1B 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 >>> Set. 186 AntFeederCable=3B 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 >>> Set. 193 AntFeederCable=2B 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 >>> Set.============================================================================================================Total: 6 MOs attempted, 6 MOs set

wrbs075> get feeder attenFinn Magnusson 2011-07-10 rev PA36 99/527)

=================================================================================================================MO Attribute Value=================================================================================================================AntFeederCable=2A dlAttenuation i[15] = 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 AntFeederCable=2A ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=1A dlAttenuation i[15] = 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 AntFeederCable=1A ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=3A dlAttenuation i[15] = 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 AntFeederCable=3A ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=1B dlAttenuation i[15] = 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 AntFeederCable=1B ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=3B dlAttenuation i[15] = 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 AntFeederCable=3B ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 AntFeederCable=2B dlAttenuation i[15] = 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 AntFeederCable=2B ulAttenuation i[15] = 0 0 0 0 0 0 0 0 0 0 0 0 -1 -1 -1 =================================================================================================================Total: 6 MOs

Setting an attribute of type sequence of MoRef

RNC11> mom . . sequence:moref ^$

##################################################################################################MO Class Attribute Type Flags##################################################################################################Aal2PathDistributionUnit aal2PathVccTpList sequence:moRef-Aal2PathVccTp --------------------------------------------------------------------------------------------------List of references to Aal2PathVccTp MO:s.Note that setting of this attribute removes the current list of Aal2PathVccTp's.Each reference must be unique among all paths within all Aal2PathDistributionUnit's belonging to the same Aal2Ap.**************************************************************************************************Ranap packetDataRouterRef sequence:moRef-ManagedObject --------------------------------------------------------------------------------------------------List of references to instances of PacketDataRouter MO or IpEthPacketDataRouter MO.To be used for Iu Flex.Unit: N/AResolution: N/A**************************************************************************************************Jvm admClasspath sequence:moRef-LoadModule


--------------------------------------------------------------------------------------------------New classpath that will be activated at next restart of JVM. The classpath has a directory, which contains the load module, i.e. the classpath references the load module.**************************************************************************************************

RNC11> get ranap= packet

=================================================================================================================MO Attribute Value=================================================================================================================Ranap=Iuc2300 packetDataRouterRef [0] = Ranap=Iup2810 packetDataRouterRef [10] = >>> packetDataRouterRef = RncFunction=1,RncModule=1,PacketDataRouter=Pdr1Gtpu1 >>> packetDataRouterRef = RncFunction=1,RncModule=1,PacketDataRouter=Pdr1Gtpu2 >>> packetDataRouterRef = RncFunction=1,RncModule=1,PacketDataRouter=Pdr2Gtpu1 >>> packetDataRouterRef = RncFunction=1,RncModule=1,PacketDataRouter=Pdr2Gtpu2 >>> packetDataRouterRef = RncFunction=1,RncModule=8,PacketDataRouter=Pdr3Gtpu1 >>> packetDataRouterRef = RncFunction=1,RncModule=8,PacketDataRouter=Pdr3Gtpu2 >>> packetDataRouterRef = RncFunction=1,RncModule=8,PacketDataRouter=Pdr4Gtpu1 >>> packetDataRouterRef = RncFunction=1,RncModule=8,PacketDataRouter=Pdr4Gtpu2 >>> packetDataRouterRef = RncFunction=1,RncModule=1,PacketDataRouter=Pdr5Gtpu1 >>> packetDataRouterRef = RncFunction=1,RncModule=1,PacketDataRouter=Pdr5Gtpu2=================================================================================================================Total: 2 MOs

RNC11> set ranap=iup packetDataRouterRef RncModule=1,PacketDataRouter=Pdr1Gtpu1 RncModule=1,PacketDataRouter=Pdr1Gtpu2

============================================================================================================ Id MO packetDataRouterRef Result============================================================================================================ 4912 Ranap=Iup2810 3314,3313 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

or: set ranap=iup packetDataRouterRef RncModule=1,PacketDataRouter=Pdr1Gtpu1;RncModule=1,PacketDataRouter=Pdr1Gtpu2



=================================================================================================================MO Attribute Value=================================================================================================================Ranap=Iuc2300 packetDataRouterRef [0] = Ranap=Iup2810 packetDataRouterRef [2] = >>> packetDataRouterRef = RncFunction=1,RncModule=1,PacketDataRouter=Pdr1Gtpu1 >>> packetDataRouterRef = RncFunction=1,RncModule=1,PacketDataRouter=Pdr1Gtpu2=================================================================================================================Total: 2 MOs

Impact of the prompt format on the command line

If the command is very long, type “b” to disable the prompt highlighting so that the command will not wrap around itself on the commandline

Example: trying to run the command “set ranap=iup packetDataRouterRef RncModule=1,PacketDataRouter=Pdr1Gtpu1 RncModule=1,PacketDataRouter=Pdr1Gtpu2 RncModule=1,PacketDataRouter=Pdr1Gtpu3” shows this:

etDataRouter=Pdr1Gtpu3acketDataRouterRef RncModule=1,PacketDataRouter=Pdr1Gtpu1 RncModule=1,PacketDataRouter=Pdr1Gtpu2

Type “b” at the prompt to disable prompt highlight, then run the command:

RNC11 > b

RNC11> set ranap=iup packetDataRouterRef RncModule=1,PacketDataRouter=Pdr1Gtpu1 RncModule=1,PacketDataRouter=Pdr1Gtpu2 RncModule=1,PacketDataRouter=Pdr1Gtpu3

To restore prompt highlight, type “b” again:

RNC11> b

RNC11 >

The prompt format can also be changed permanently with the following uservariables (by setting it in one of the moshellrc files): RNC11> uv prompt

prompt_color = 1prompt_highlight = 1


Setting an attribute of type sequence of String

Here we must use comma to separate the array elements since there could be spaces within each element

RNC11> get jvm admopt

=================================================================================================================MO Attribute Value=================================================================================================================Jvm=1 admOptions s[2] = Xms461M Dhttp.root=/c/public_html =================================================================================================================Total: 1 MOs

RNC11> set jvm=1 admoptions Xms500M,Dhttp.root=/c/public_html

============================================================================================================ Id MO admOptions Result============================================================================================================ 43 Jvm=1 Xms500M,Dhttp.root=/c/public_html >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> get jvm admop

=================================================================================================================MO Attribute Value=================================================================================================================Jvm=1 admOptions s[2] = Xms500M Dhttp.root=/c/public_html =================================================================================================================Total: 1 MOs


Setting an attribute of type sequence of struct

Here we must use semicolon to separate the array elements since there could be spaces or commas within each element

RNC11> get ExternalGsmNetwork aliasplmn

=================================================================================================================MO Attribute Value=================================================================================================================ExternalGsmNetwork=1 aliasPlmnIdentities t[0] = =================================================================================================================Total: 1 MOs

RNC11> mom extern aliaspl

##################################################################################################MO Class Attribute Type Flags##################################################################################################ExternalGsmNetwork aliasPlmnIdentities sequence:structRef-PlmnIdentity --------------------------------------------------------------------------------------------------List of alias PLMN identities. When the Selective Handover feature is active, only UEs with Home PLMN id equal to the PLMN id of this GSM network, or to any of the alias PLMN ids, will be allowed handover to this GSM network.The default value "empty" indicates that the sequence length = 0, i.e. no alias PLMNs defined.Unit: N/AResolution: N/A**************************************************************************************************

RNC11> mom plmnident .

##################################################################################Struct StructMember Type##################################################################################PlmnIdentity mcc long----------------------------------------------------------------------------------The MCC part of a PLMN identity used in the radio network.Unit: N/AResolution: N/ARange: 0 to 999**********************************************************************************


PlmnIdentity mnc long----------------------------------------------------------------------------------The MNC part of a PLMN identity used in the radio network.Unit: N/AResolution: N/ARange: 0 to 999**********************************************************************************PlmnIdentity mncLength long----------------------------------------------------------------------------------The length of the MNC part of a PLMN identity used in the radio networkUnit: 1 digitResolution: 1Range: 2 to 3**********************************************************************************

RNC11> set ExternalGsmNetwork=1 aliasPlmnIdentities mcc=240,mnc=99,mnclength=2;mcc=234,mnc=03,mnclength=2

============================================================================================================ Id MO aliasPlmnIdentities Result============================================================================================================ 3787 ExternalGsmNetwork=1 mcc:i=240,mnc:i=99,mncLength:i=2;mcc:i=234,mnc:i=03,mncLength:i=2 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> get ext alias

100309-14:21:30 137.58.194.147 8.0b RNC_NODE_MODEL_K_9_115_COMPLETE stopfile=/tmp/24356=================================================================================================================MO Attribute Value=================================================================================================================ExternalGsmNetwork=1-A aliasPlmnIdentities t[2] = >>> Struct[0] has 3 members: >>> 1.mcc = 240 >>> 2.mnc = 99 >>> 3.mncLength = 2 >>> Struct[1] has 3 members: >>> 1.mcc = 234 >>> 2.mnc = 3 >>> 3.mncLength = 2


=================================================================================================================Total: 1 MOs

Setting to an empty value (only applicable to data types “string” and “moref”, and sequence thereof)

RNC11> set 0 userlabel

============================================================================================================ Id MO userLabel Result============================================================================================================ 0 ManagedElement=1 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> set ranap=iup packetDataRouterRef

============================================================================================================ Id MO packetDataRouterRef Result============================================================================================================ 4912 Ranap=Iup2810 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set


=================================================================================================================MO Attribute Value=================================================================================================================Ranap=Iuc2300 packetDataRouterRef [0] = Ranap=Iup2810 packetDataRouterRef [0] = =================================================================================================================Total: 2 MOs


Setting multiple attributes at the same timeThis is used for attributes that have dependencies between each other

RNC11> setm UtranCell=301100 uarfcnDl 10713 uarfcnUl 9763

============================================================================================================ Id MO uarfcnDl,uarfcnUl Result============================================================================================================ 4495 UtranCell=301100 10713 9763 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> setm UtranCell=301100 locationAreaRef LocationArea=3017 routingAreaRef LocationArea=3017,RoutingArea=13 serviceAreaRef LocationArea=3017,ServiceArea=1100

============================================================================================================ Id MO locationAreaRef,routingAreaRef,serviceAreaRef Result============================================================================================================ 4495 UtranCell=301100 4512 4585 4533 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> setm sid=1 sib1 sib1RepPeriod=32,sib1startpos=4 sib11 sib11repperiod=128,sib11startpos=20

============================================================================================================ Id MO sib1,sib11 Result============================================================================================================ 4764 Sid=1 sib1RepPeriod:i=32,sib1StartPos:i=4 sib11RepPeriod:i=128,sib11StartPos:i=20 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

Setting an attribute to its current value


This is used when we want to set an attribute to the same value that it already has.

For instance this can be done on the attribute IubLink:preferredSubrackRef (or IubLink: atmUserPlaneTermSubrackRef in P7) to re-allocate the Iub resources evenly in the subrack (see UTRAN presentation)

It can also be useful to check the syntax of the set command, when we want to set an attribute but don’t know what syntax to use.

RNC23> get iublink=iub-10$ subrack

=================================================================================================================MO Attribute Value=================================================================================================================IubLink=Iub-10 atmUserPlaneTermSubrackRef Subrack=MS=================================================================================================================Total: 1 MOs

RNC23> setc iublink=iub-10$ atmUserPlaneTermSubrackRef

============================================================================================================ Id MO atmUserPlaneTermSubrackRef Result============================================================================================================ 28 IubLink=Iub-10 5776 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC23> get iublink=iub-10$ subrack

=================================================================================================================MO Attribute Value=================================================================================================================IubLink=Iub-10 atmUserPlaneTermSubrackRef Subrack=MS=================================================================================================================


Total: 1 MOs

Exception handling, example of set failures

- In this case it failed because the value was out of range

RNC11> set 7931 primaryScramblingCode 630

============================================================================================================ Id MO primaryScramblingCode Result============================================================================================================ 7931 UtranCell=Iub-2-1 630 !!!! Processing failure :se.ericsson.cello.moframework.ValueOutOfRangeException TAG :"ValueOutOfRange" VARIABLES :"$moTypeName" = "UtranCell", "$attrName" = "primaryScramblingCode"============================================================================================================Total: 1 MOs attempted, 0 MOs set

RNC11> mom ûtrancell primaryscra

##################################################################################################################################MO Class Attribute Type Flags##################################################################################################################################UtranCell primaryScramblingCode long mandatory----------------------------------------------------------------------------------------------------------------------------------The primary downlink scrambling code to be used in the cell.Disturbances:Changing this attribute may affect ongoing traffic.Range: 0 to 511**********************************************************************************************************************************

- In this case it failed because there was not enough free bandwidth

RNC11> lset atmport=ms-6-1,vpltp=[^,]+$ atmTrafficDescriptor AtmTrafficDescriptor=C1P55000

============================================================================================================ Id MO atmTrafficDescriptor Result============================================================================================================


2226 AtmPort=MS-6-1,VplTp=1 2423 !!!! Processing failure :se.ericsson.cello.moframework.FroRequestFailedException TAG :"FroRequestFailed" VARIABLES :"$MO typename" = "VplTp", "$FRO typename" = "VpCp", "$Request type" = "SetAttrReq: AET_VPCPMI_RSP_RESERVE_BW_FAIL", "$result" = "10"============================================================================================================Total: 1 MOs attempted, 0 MOs set

NOTE: in earlier releases the exception code is not translated. Some exception codes translation can be found on http:/ /utran01.epa.ericsson.se/utranwiki/CelloInformation/FroExceptionsSome exception codes translation may also appear in the “te log read” of the MP handling the FRO layer for that MO.

- In this case it failed because the attribute was restricted

RNC11> mom vcltp traff

##################################################################################################MO Class Attribute Type Flags##################################################################################################VclTp atmTrafficDescriptorId moRef:AtmTrafficDescriptor restricted,noNotification,mandatory--------------------------------------------------------------------------------------------------Reference to the AtmTrafficDescriptor profile.**************************************************************************************************

RNC11> set 2509 atmTrafficDescriptorId AtmTrafficDescriptor=U4P35000M500

============================================================================================================ Id MO atmTrafficDescriptorId Result============================================================================================================ 2509 AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 2171 !!!! Processing failure :se.ericsson.cello.moframework.NoSuchAttributeException TAG :"NoSuchAttribute" VARIABLES :"$attrName" = "atmTrafficDescriptorId", "$moTypeName" = "VclTp"============================================================================================================Total: 1 MOs attempted, 0 MOs set

NOTE: VclTp:AtmTrafficDescriptor is not restricted anymore from CPP5.1


http://utran01.epa.ericsson.se/utranwiki/CelloInformation/FroExceptions

More help on setting attributes:

RNC11> h set

***************************************************************************************set[m][c][1]/lset[m][c][1] <moGroup>|<moFilter>|<proxy(s)> <attribute> [<value>]***************************************************************************************Set an attribute value on one or several MO's.

Only attributes that do not have the flag "readOnly" or "restricted" can be set. Use the "mom" command to check the flags of an attribute. For "restricted" attributes, it is possible to use the "rset" command.

Options: - "m" option is for setting several attributes simultaneously in the same MO, using a single transaction for all attributes in each MO. Needed for changing certain attributes in the RNC UtranCell (locationAreaRef, uarfcnDl, uarfcnUl). - "1" option is for setting one attribute on many MOs simultaneously, using a single transaction for all the MOs. Needed for changing certain attributes in the eNB EUtranCell (tac, frameStartOffset, subframeAssignment, specialSubframePattern). - "c" option is for setting an attribute to its current value. When using this option, the attribute value shall not be specified since the current attribute is used.Note: These options cannot be combined.

Examples:set primarycpichpower to 250 on all cells (in RNC) >> set cell primarycpichpower 250set sirmin to 60 on all MO's under uerc (in RNC) >> lset uerc= sirmin 60set an empty value for the userlabel of this pluginunit: >> lset ms,slot=1,pluginunit=1$ user labelset an attribute of type struct >> set mtp3bspitu sppriority prioslt=2set three attributes simultaneously on a MO: >> setm utrancell=3012 locationarearef locationarea=9 servicearearef locationarea=9,servicearea=1 routingarearef locationarea=9,routingarea=1set the preferredsubrackref attribute to its current value on all Iublinks, in order to evenly spread the sites across all modules. >> setc iublink= preferredsubrackrefset the tac attribute simultaneously on all EUtranCellFDD in the eNB: >> set1 êutrancellfdd= tac 1280

!!! Please refer to README chap 3.3 (or "h syntax") for more info on how to set values for each specific attribute type (eg Struct, array of MoRef, array of Struct, etc).


RNC11> h syntax

....

##################################################3.3- How to specify attribute values in set/cr/acc commands################################################## a) For attributes of type Struct, use the following syntax: attr1=val1[,attr2=val2[,attr3=val3]]]...It is not necessary to specify all the struct members, only those that are required to change can be specified.Example: >> set sid sib11 sib11repperiod=128 >> set mtp3bspitu sppriority prioslt=2 >> set mtp3bspitu sppriority prioslt=2,prioco=2

b) For attributes of type MoRef, just type the MO LDN (without "ManagedElement=1"). Eg: >> lset AtmPort=1221,VplTp=vp1 atmTrafficDescriptor transportnetwork=1,atmtrafficdescriptor=C1P4500It is also possible to skip the first parent (eg transportnetwork, swmanagement, etc). Eg: >> cr rncfunction=1,utrancell=30451,utranrelation=30451to30521 Attribute 1 of 1, utrancellref (moRef:UtranCell): utrancell=30521 #in this case we don't have to specify rncfunction=1

c) For attributes of type array of MoRefs, separate each element of the array with spaces. Eg: >> set jvm admclasspath loadmodule=oms loadmodule=vbjorb loadmodule=asms_sharp loadmodule=iaik loadmodule=cma loadmodule=roam >> acc aal2pathdistributionunit=1 addPath Parameter 1 of 1, aal2PathVccTpId (sequence-moRef-Aal2PathVccTp): aal2pathvcctp=csa aal2pathvcctp=csb

d) For attributes of type array of Struct, separate each element of the array with semicolons. Eg: >> set rncfunction aliasPlmnIdentities mcc=300,mnc=23,mnclength=2;mcc=345,mnc=32,mnclength=2;mcc=208,mnc=123,mnclength=3

e) For attributes of type array of integer/long/float/string/boolean, separate each element of the array with commas. Eg: >> set antfeedercable=6 ulattenuation 10,10,10,10,10,10,10,10,10 >> set jvm options -Xms65000k,-Dhttp.root=/c/public_html,-Dse.ericsson.security.PropertyFileLocation=/c/java/SecurityManagement.prp >> set cell=3041 ActiveOverlaidCDMAChannelList true,true,false,true >> acc managedelementdata addDhcpServerAddress Parameter 1 of 1, ipAddressArray (sequence-string): 10.1.1.3,10.1.1.4

f) To input an empty value: * in set command, just leave the value field blank. Eg: >> set 0 userlabel (# attribute type is string) >> set reliableprogramuniter admpassiveslot (#attribute type is MoRef) * in cr command, type "null" or "d". This is only supported for non-mandatory (restricted) attributes,


because mandatory attributes must have a value * in acc command, type "null". This is only supported for parameters of type MoRef or String......

3.10 rset command

Purpsose: to set an attribute that is restricted (use the “mom” command to see if an attribute is restricted)Works by deleting the MO and recreating it with the new value.Is equivalent to doing the following 5 steps: u+, del/rdel, u-, editing the undo file, run the undofile

RNC11> lget AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 traff

=================================================================================================================MO Attribute Value=================================================================================================================AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 atmTrafficDescriptorId AtmTrafficDescriptor=U4P35000M500=================================================================================================================Total: 1 MOs

RNC11> lset AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 atmTrafficDescriptorId AtmTrafficDescriptor=U3P4500M3000

============================================================================================================ Id MO atmTrafficDescriptorId Result============================================================================================================ 446 AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 448 !!!! Processing failure :se.ericsson.cello.moframework.NoSuchAttributeException TAG :"NoSuchAttribute" VARIABLES :"$attrName" = "atmTrafficDescriptorId", "$moTypeName" = "VclTp"============================================================================================================Total: 1 MOs attempted, 0 MOs set

RNC11> mom vcltp atmtraff

##################################################################################################MO Class Attribute Type Flags


##################################################################################################VclTp atmTrafficDescriptorId moRef:AtmTrafficDescriptor restricted,noNotification,mandatory--------------------------------------------------------------------------------------------------Reference to the AtmTrafficDescriptor profile.**************************************************************************************************

RNC11> rset AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 atmTrafficDescriptorId AtmTrafficDescriptor=U3P4500M3000

Set restricted attribute atmtrafficdescriptorid on following MOs ?=================================================================================== 446 TransportNetwork=1,AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100===================================================================================Are you Sure [y/n] ? y

etc....

Deleting ...=================================================================================== 595 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1 >>> Mo deleted 510 TransportNetwork=1,Aal2PathVccTp=Iub1-3 >>> Mo deleted 446 TransportNetwork=1,AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 >>> Mo deleted===================================================================================Total: 3 MOs attempted, 3 MOs deleted

etc...

===============================================================================================Undo Commands summary for script file: /home/eanzmagn/moshell_logfiles/logs_moshell/rset/rset_060709-234441_RNC11_VclTpvc100.mos===============================================================================================cr TransportNetwork=1,AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 >>> [Proxy ID = 672]lset TransportNetwork=1,AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100$ userLabel -No Change-cr TransportNetwork=1,Aal2PathVccTp=Iub1-3 >>> [Proxy ID = 676]lset TransportNetwork=1,Aal2PathVccTp=Iub1-3$ timerCu 10 -No Change-lset TransportNetwork=1,Aal2PathVccTp=Iub1-3$ nomPmBlocksize 1024 -No Change-lset TransportNetwork=1,Aal2PathVccTp=Iub1-3$ continuityCheck false -No Change-lset TransportNetwork=1,Aal2PathVccTp=Iub1-3$ counterMode 0 -No Change-lset TransportNetwork=1,Aal2PathVccTp=Iub1-3$ administrativeState 1 -No Change-lset TransportNetwork=1,Aal2PathVccTp=Iub1-3$ userLabel -No Change-lset TransportNetwork=1,Aal2PathVccTp=Iub1-3$ alarmReport 2 -No Change-lset TransportNetwork=1,Aal2PathVccTp=Iub1-3$ aal2QoSAvailableProfiles 4 >>> Set.cr TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1 >>> [Proxy ID = 786]lset TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1$ userLabel userLabel >>> Set.lset TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1$ aal2PathVccTpList TransportNetwork=1,Aal2PathVccTp=Iub1-1 TransportNetwork=1,Aal2PathVccTp=Iub1-2 TransportNetwork=1,Aal2PathVccTp=Iub1-3 >>> Set.


Note: from cpp5.1, the restriction has been removed on certain attributes such as VclTp::atmTrafficDescriptorId so it is then possible to use “set” instead of “rset”

To change the name of an MO:

RNC11> rset utrancell=cell123 utrancellid cell_north_123

MGW1> rset atmport=ES-2-6-1 atmportid 2061

3.11 bl/deb command

Purpose: a shortcut for setting the administrativeState

Lock (block)

RNC11> lbl Subrack=MS,Slot=5,PlugInUnit=1$

============================================================================================================ Id MO AdministrativeState Result============================================================================================================ 457 Subrack=MS,Slot=5,PlugInUnit=1 0 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

Unlock (deblock)

RNC11> deb 457

============================================================================================================ Id MO AdministrativeState Result============================================================================================================ 457 Subrack=MS,Slot=5,PlugInUnit=1 1 >>> Set.


============================================================================================================Total: 1 MOs attempted, 1 MOs set

Soft LockGives the resource some time to shutdown graciously, handing over traffic to other resources.

RNC11> bls 457

============================================================================================================ Id MO AdministrativeState Result============================================================================================================ 457 Subrack=MS,Slot=5,PlugInUnit=1 2 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

RNC11> st 457

===================================================================================Proxy Adm State Op. State MO=================================================================================== 457 2 (SHUTTINGDOWN) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1===================================================================================Total: 1 MOs

RNC11> st 457

===================================================================================Proxy Adm State Op. State MO=================================================================================== 457 0 (LOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1===================================================================================Total: 1 MOs

Checking which MOs support soft-lock

RNC11> mom pluginunit admin

##################################################################################################


MO Class Attribute Type Flags##################################################################################################PlugInUnit administrativeState enumRef:AdmState --------------------------------------------------------------------------------------------------The administrative state of the PlugInUnit.The possibility to rollback the setting of this attribute is limited.Default=locked **************************************************************************************************

RNC11> mom admstate

##################################################################################Enum Values##################################################################################AdmState 0:locked, 1:unlocked, 2:shuttingDown---------------------------------------------------------------------------------- - locked: - unlocked: - shuttingDown: **********************************************************************************

RNC11> mom utrancell admin

##################################################################################################MO Class Attribute Type Flags##################################################################################################UtranCell administrativeState enumRef:SupportedAdminStates --------------------------------------------------------------------------------------------------The administrative state of the cell.Default=LOCKED **************************************************************************************************

RNC11> mom adminstate

##################################################################################Enum Values##################################################################################SupportedAdminStates 0:LOCKED, 1:UNLOCKED----------------------------------------------------------------------------------


- LOCKED: - UNLOCKED: **********************************************************************************

Note: soft-lock is supported on UtranCell from UTRAN P6

3.12 cr command

RNC11> cr rncfunction=1,iublink=99

Attribute 1 of 2, rbsId (long): 99

Attribute 2 of 2, rncModuleRef (moRef:RncModule): Enter mo LDN: rncmodule=1

>>> [Proxy ID = 5204] MO name :ManagedElement=1,RncFunction=1,IubLink=99

RNC11> cr swmanagement=1,upgradepackage=CXP9012014_R4G05

Attribute 1 of 2, ftpServerIpAddress (string): 137.58.194.174

Attribute 2 of 2, upFilePathOnFtpServer (string): /TCM/UP/WENDY/CXP9012014_R4G04/CXP9012014_R4G05.xml

Following attributes are optional. Enter attribute value or "d" for default.Once the MO is created, these attributes cannot be changed (they are restricted).

Attribute 1 of 2, user (string): d

Attribute 2 of 2, password (string): d

!!!! Processing failure :se.ericsson.cello.upgradepackage.main.exception.FtpServerNotAccessibleException TAG :"FtpServerNotAccessible" VARIABLES :"$msg" = "Invalid user ID, password or IP address for FTP server"

RNC11> cr swmanagement=1,upgradepackage=CXP9012014_R4G05

Attribute 1 of 2, ftpServerIpAddress (string): 137.58.194.174

Attribute 2 of 2, upFilePathOnFtpServer (string): /TCM/UP/WENDY/CXP9012014_R4G04/CXP9012014_R4G05.xml

Following attributes are optional. Enter attribute value or "d" for default.Once the MO is created, these attributes cannot be changed (they are restricted).


Attribute 1 of 2, user (string): ftp

Attribute 2 of 2, password (string): ftp

>>> [Proxy ID = 5205] MO name :ManagedElement=1,SwManagement=1,UpgradePackage=CXP9012014_R4G05

To exit from a create statement, just type “enter” at one of the prompts

RNC11> cr swmanagement=1,upgradepackage=CXP9012014_R10J01

Attribute 1 of 2, ftpServerIpAddress (string): Empty value! Aborting...

To input an empty value, type “d” or “null”.

3.13 acl/acc command

3.13.1 List actions

RNC11> h acl

*******************************************************acl/lacl <moGroup>|<moFilter>|<proxy(s)>|all [<action-filter>]*******************************************************Lists available MO actions.

....

The number of parameters that will be required for performing the action appears on the right-hand side

RNC11> acl upgradepackage=CXP9012014_R4G04

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 516 UpgradePackage=CXP9012014_R4G04 cancelInstall 0 516 UpgradePackage=CXP9012014_R4G04 cancelUpgrade 0


516 UpgradePackage=CXP9012014_R4G04 clearUpgradeLogFile 0 516 UpgradePackage=CXP9012014_R4G04 confirmUpgrade 0 516 UpgradePackage=CXP9012014_R4G04 forcedInstall 0 516 UpgradePackage=CXP9012014_R4G04 install 0 516 UpgradePackage=CXP9012014_R4G04 nonBlockingForcedInstall 0 516 UpgradePackage=CXP9012014_R4G04 nonBlockingInstall 0 516 UpgradePackage=CXP9012014_R4G04 nonBlockingSelectiveForcedInstall 0 516 UpgradePackage=CXP9012014_R4G04 nonBlockingSelectiveInstall 0 516 UpgradePackage=CXP9012014_R4G04 rebootNodeUpgrade 0 516 UpgradePackage=CXP9012014_R4G04 upgrade 0 516 UpgradePackage=CXP9012014_R4G04 verifyUpgrade 0=================================================================================================================

RNC11> acl 0

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 0 ManagedElement=1 manualRestart 3 0 ManagedElement=1 restart 1=================================================================================================================

RNC11> lacl Mtp3bSpItu=Iu1,Mtp3bSls=Iup-2-2810-3,Mtp3bSlItu=1

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 1722 Mtp3bSpItu=Iu1,Mtp3bSls=Iup-2-2810-3,Mtp3bSlItu=1 activate 0 1722 Mtp3bSpItu=Iu1,Mtp3bSls=Iup-2-2810-3,Mtp3bSlItu=1 deactivate 0 1722 Mtp3bSpItu=Iu1,Mtp3bSls=Iup-2-2810-3,Mtp3bSlItu=1 emergencyActivate 0 1722 Mtp3bSpItu=Iu1,Mtp3bSls=Iup-2-2810-3,Mtp3bSlItu=1 localInhibit 0 1722 Mtp3bSpItu=Iu1,Mtp3bSls=Iup-2-2810-3,Mtp3bSlItu=1 localUninhibit 0=================================================================================================================

RNC11> acl iprouting

=================================================================================================================


Proxy MO Action Nr of Params================================================================================================================= 2582 Ip=1,IpRoutingTable=1 addStaticRoute 5 2582 Ip=1,IpRoutingTable=1 deleteStaticRoute 1 2582 Ip=1,IpRoutingTable=1 getRoutingTableEntry 1 2582 Ip=1,IpRoutingTable=1 listRoutes 0 2582 Ip=1,IpRoutingTable=1 numberOfRoutes 0=================================================================================================================

Use the mom command to see more details about an action and the parameters and return value

RNC11> mom man manualrestart

##################################################################################################################################MO Class Action ReturnType Parameters##################################################################################################################################ManagedElement manualRestart void 3:restartRank:restartReason:restartInfo:enumRef-RestartRank:enumRef-RestartReason:string----------------------------------------------------------------------------------------------------------------------------------Manual restarts of the node.Transaction required: NoReturnType: voidParameter 1: restartRank (enumRef-RestartRank). The restart type.Parameter 2: restartReason (enumRef-RestartReason). This parameter is mandatory.Parameter 3: restartInfo (string). A free text field where extra information can be added.This parameter is optional. The length of this text field is 0..80.**********************************************************************************************************************************

3.13.2 Execute an action:

RNC11> h acc

*******************************************************acc/lacc <moGroup>|<moFilter>|<proxy(s)>|all <action>*******************************************************Execute an MO action.

.....


Some actions require no parameters, some require parametersThe return value of the action can be empty (null) or contain a value.

RNC11> lacc Mtp3bSpItu=Iu,Mtp3bSls=Iup-2351-2810,Mtp3bSlItu=Iup-2351-2810 activate

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 1266 Mtp3bSpItu=Iu,Mtp3bSls=Iup-2351-2810,Mtp3bSlItu=Iup-2351-2810 activate 0 >>> Return value = null

=================================================================================================================Total: 1 MOs attempted, 1 MOs actioned

RNC11> acc 1522 eteloopback

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 1522 AtmPort=MS-27-2-1,VplTp=1,VpcTp=1,VclTp=Iub-33-34 eteLoopBack 0 >>> Return value = true


RNC11> acc iprouting listroutes

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2582 Ip=1,IpRoutingTable=1 listRoutes 0 >>> Return value = 3destinationIpAddr destinationNetMask nextHopIpAddr routeMetric routeType interface redistribute active0.0.0.0 0.0.0.0 137.58.194.1 100 2 le0 FALSE active127.0.0.1 255.255.255.255 0.0.0.0 1 2 lo0 FALSE active


137.58.194.0 255.255.254.0 0.0.0.1 1 2 le0 FALSE active=================================================================================================================Total: 1 MOs attempted, 1 MOs actioned

RNC11> acc 0 manualrestart

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 0 ManagedElement=1 manualRestart 3

Parameter 1 of 3, restartRank (enumRef-RestartRank): Enter one of the following integers: 0:RESTART_WARM, 1:RESTART_REFRESH, 2:RESTART_COLD, 3:RESTART_COLDWTEST: 0

Parameter 2 of 3, restartReason (enumRef-RestartReason): Enter one of the following integers: 0:PLANNED_RECONFIGURATION, 1:UNPLANNED_NODE_EXTERNAL_PROBLEMS, 2:UNPLANNED_NODE_UPGRADE_PROBLEMS, 3:UNPLANNED_O_AND_M_ISSUE, 4:UNPLANNED_CYCLIC_RECOVERY, 5:UNPLANNED_LOCKED_RESOURCES, 6:UNPLANNED_COLD_WITH_HW_TEST, 7:UNPLANNED_CALL_PROCESSING_DEGRADATION, 8:UNPLANNED_LOW_COVERAGE: 0

Parameter 3 of 3, restartInfo (string): eanzmagn >>> Return value = null


RNC11> acc iprouting addstaticroute

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2582 Ip=1,IpRoutingTable=1 addStaticRoute 5

Parameter 1 of 5, ipAddress (string): 122.10.1.10

Parameter 2 of 5, subnetMask (string): 255.255.255.255

Parameter 3 of 5, hopIpAddress (string): 122.10.1.10


Parameter 4 of 5, routeMetric (long): 1

Parameter 5 of 5, redistribute (boolean): false >>> Return value = null


RNC11> acc ipr numberofroutes

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2582 Ip=1,IpRoutingTable=1 numberOfRoutes 0 >>> Return value = 4


RNC11> acc ipr getroutingtableentry

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2582 Ip=1,IpRoutingTable=1 getRoutingTableEntry 1

Parameter 1 of 1, index (long): 3 >>> Struct Return value has 8 members: >>> 1.destinationIpAddr = 122.10.1.10 >>> 2.destinationNetworkMask = 255.255.255.255 >>> 3.nextHopIpAddr = 122.10.1.10 >>> 4.routeMetric = 1 >>> 5.routeType = 2 >>> 6. inter faceName = ~~~~~~~ >>> 7.redistribute = false >>> 8.active = false

=================================================================================================================


Total: 1 MOs attempted, 1 MOs actioned

RNC11> acc ipr deletestaticroute

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2582 Ip=1,IpRoutingTable=1 deleteStaticRoute 1

Parameter 1 of 1, routingTableEntry (structRef-RoutingTableEntry): destinationIpAddr=122.10.1.10,destinationNetworkMask=255.255.255.255,nextHopIpAddr=122.10.1.10!!!! Processing failure :se.ericsson.cello.moframework.NoSuchFieldException TAG :"NoSuchField" VARIABLES :"$fieldName" = "routeMetric"


RNC11> acc ipr deletestaticroute

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2582 Ip=1,IpRoutingTable=1 deleteStaticRoute 1

Parameter 1 of 1, routingTableEntry (structRef-RoutingTableEntry): destinationIpAddr=122.10.1.10,destinationNetworkMask=255.255.255.255,nextHopIpAddr=122.10.1.10,routemetric=1 >>> Return value = null


RNC11> acc ipr listroutes

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2582 Ip=1,IpRoutingTable=1 listRoutes 0 >>> Return value = 3


0.0.0.0 0.0.0.0 137.58.194.1 100 2 le0 FALSE active127.0.0.1 255.255.255.255 0.0.0.0 1 2 lo0 FALSE active137.58.194.0 255.255.254.0 0.0.0.1 1 2 le0 FALSE active


RNC11> get 793

=================================================================================================================793 TransportNetwork=1,Synchronization=1=================================================================================================================SynchronizationId 1degradationIsFault 0 (degrNotFault)syncRefActivity i[8] = 1 2 1 1 1 1 1 1 syncRefPriority i[8] = 1 2 3 0 0 0 0 0 syncRefStatus i[8] = 0 3 0 0 0 0 0 0 syncReference [8] = >>> syncReference = Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 >>> syncReference = Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1 >>> syncReference = Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1 >>> syncReference = >>> syncReference = >>> syncReference = >>> syncReference = >>> syncReference = systemClockA 2 (lockedMode)systemClockB 2 (lockedMode)userLabel =================================================================================================================Total: 1 MOs

RNC11> acl 793

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 793 Synchronization=1 addSyncRefResource 2 793 Synchronization=1 changeSyncRefPriority 2


793 Synchronization=1 removeSyncRefResource 1 793 Synchronization=1 resetLossOfTracking 1=================================================================================================================

RNC11> acc 793 removeSyncRefResource

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 793 Synchronization=1 removeSyncRefResource 1

Parameter 1 of 1, syncReference (moRef-ManagedObject): Enter mo LDN: Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1Last MO: 801. Loaded 8 MOs. Total: 799 MOs. MO Class: Os155SpiTtp. >>> Return value = null


RNC11> acc 793 addSyncRefResource

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 793 Synchronization=1 addSyncRefResource 2

Parameter 1 of 2, syncReference (moRef-ManagedObject): Enter mo LDN: Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1

Parameter 2 of 2, syncPriority (long): 3 >>> Return value = null


To cancel an action, just type “enter” at one of the prompts.


RNC11> acc 0 restart

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 0 ManagedElement=1 restart 1

Parameter 1 of 1, restartRank (enumRef-RestartRank): Enter one of the following integers: 0:RESTART_WARM, 1:RESTART_REFRESH, 2:RESTART_COLD, 3:RESTART_COLDWTEST: Empty value! Aborting...


3.14 del/rdel command

RNC11> h del

*******************************************************del/ldel <moGroup>|<moFilter>|<proxy(s)>*******************************************************Delete MO(s).

An MO can only be deleted when its reservedBy list is empty and when it does not have any children. If the MO does have children and/or a non-empty reservedBy attribute, it is possible to use the rdel/lrdel command instead.

.....

RNC11> h rdel

*******************************************************rdel/lrdel <moGroup>|<moFilter>|<proxy(s)>*******************************************************Delete MO(s) together with children and reserving MOs.

......


RNC11> del 5204

Delete following MOs ?=================================================================================== 5204 RncFunction=1,IubLink=99===================================================================================Warning: Undo Mode is currently inactive !!!!Are you Sure [y/n] ? y

Deleting ...=================================================================================== 5204 RncFunction=1,IubLink=99 >>> Mo deleted===================================================================================Total: 1 MOs attempted, 1 MOs deleted

RNC11> del iublink=1$

Delete following MOs ?=================================================================================== 4691 RncFunction=1,IubLink=1===================================================================================Warning: Undo Mode is currently inactive !!!!Are you Sure [y/n] ? y

Deleting ...=================================================================================== 4691 RncFunction=1,IubLink=1 !!!! Processing failure :se.ericsson.wcdma.rnc.roam.mao.commonmo.ProcessingFailureException TAG :"ProcessingFailureException" VARIABLES :"$Message" = "IubLink could not be deleted, there are still references to cell(s)"===================================================================================Total: 1 MOs attempted, 0 MOs deleted

RNC11> rdel iublink=1$

Recursive Delete following MOs ?=================================================================================== 4691 RncFunction=1,IubLink=1===================================================================================Are you Sure [y/n] ? y..Delete following MOs ?=================================================================================== 3776 RncFunction=1,UtranCell=30101,UtranRelation=30101_30103_softer_wo 3764 RncFunction=1,UtranCell=30102,UtranRelation=30102_30103_softer_wo


3755 RncFunction=1,UtranCell=30103,UtranRelation=30103_30102_softer_wo 3756 RncFunction=1,UtranCell=30103,UtranRelation=30103_301107_soft_wo 3760 RncFunction=1,UtranCell=30103,UtranRelation=30103_30165_soft_wo 3761 RncFunction=1,UtranCell=30103,UtranRelation=30103_30166_soft_wo 3757 RncFunction=1,UtranCell=30103,UtranRelation=30103_30185_soft_wo 3758 RncFunction=1,UtranCell=30103,UtranRelation=30103_30186_soft_wo 3759 RncFunction=1,UtranCell=30103,UtranRelation=30103_30187_soft_wo 4419 RncFunction=1,UtranCell=301107,UtranRelation=301107_30103_soft_wo 3001 RncFunction=1,UtranCell=30165,UtranRelation=30165_30103_soft_wo 2992 RncFunction=1,UtranCell=30166,UtranRelation=30166_30103_soft_wo 2766 RncFunction=1,UtranCell=30185,UtranRelation=30185_30103_soft_wo 2740 RncFunction=1,UtranCell=30187,UtranRelation=30187_30103_soft_wo 3752 RncFunction=1,UtranCell=30103,Fach=301030 3753 RncFunction=1,UtranCell=30103,Hsdsch=301034 3754 RncFunction=1,UtranCell=30103,Pch=301033 3762 RncFunction=1,UtranCell=30103,Rach=301032 3751 RncFunction=1,UtranCell=30103 4637 RncFunction=1,LocationArea=3015,RoutingArea=11 4634 RncFunction=1,LocationArea=3015,ServiceArea=1003 3766 RncFunction=1,UtranCell=30102,UtranRelation=30102_301106_soft_wo 3774 RncFunction=1,UtranCell=30102,UtranRelation=30102_30123_soft_wo 3772 RncFunction=1,UtranCell=30102,UtranRelation=30102_30144_soft_wo 3773 RncFunction=1,UtranCell=30102,UtranRelation=30102_30145_soft_wo 3769 RncFunction=1,UtranCell=30102,UtranRelation=30102_30165_soft_wo 3770 RncFunction=1,UtranCell=30102,UtranRelation=30102_30166_soft_wo 4434 RncFunction=1,UtranCell=301106,UtranRelation=301106_30102_soft_wo 3519 RncFunction=1,UtranCell=30123,UtranRelation=30123_30102_soft_wo 3253 RncFunction=1,UtranCell=30144,CoverageRelation=30144_30102 3256 RncFunction=1,UtranCell=30144,UtranRelation=30144_30102_soft_wo 3236 RncFunction=1,UtranCell=30145,UtranRelation=30145_30102_soft_wo 3004 RncFunction=1,UtranCell=30165,UtranRelation=30165_30102_soft_wo 2990 RncFunction=1,UtranCell=30166,UtranRelation=30166_30102_soft_wo 3771 RncFunction=1,UtranCell=30102,Fach=301020 3767 RncFunction=1,UtranCell=30102,Hsdsch=301024 3765 RncFunction=1,UtranCell=30102,Pch=301023 3768 RncFunction=1,UtranCell=30102,Rach=301022 3763 RncFunction=1,UtranCell=30102 4635 RncFunction=1,LocationArea=3015,ServiceArea=1002 3781 RncFunction=1,UtranCell=30101,UtranRelation=30101_301106_soft_wo 3777 RncFunction=1,UtranCell=30101,UtranRelation=30101_30122_soft_wo 3778 RncFunction=1,UtranCell=30101,UtranRelation=30101_30123_soft_wo 3779 RncFunction=1,UtranCell=30101,UtranRelation=30101_30124_soft_wo 3786 RncFunction=1,UtranCell=30101,UtranRelation=30101_30143_soft_wo 3784 RncFunction=1,UtranCell=30101,UtranRelation=30101_30164_soft_wo 4433 RncFunction=1,UtranCell=301106,UtranRelation=301106_30101_soft_wo


3532 RncFunction=1,UtranCell=30122,UtranRelation=30122_30101_soft_wo 3518 RncFunction=1,UtranCell=30123,UtranRelation=30123_30101_soft_wo 3507 RncFunction=1,UtranCell=30124,UtranRelation=30124_30101_soft_wo 3260 RncFunction=1,UtranCell=30143,UtranRelation=30143_30101_soft_wo 3014 RncFunction=1,UtranCell=30164,UtranRelation=30164_30101_soft_wo 3783 RncFunction=1,UtranCell=30101,Fach=301010 3785 RncFunction=1,UtranCell=30101,Hsdsch=301014 3780 RncFunction=1,UtranCell=30101,Pch=301013 3782 RncFunction=1,UtranCell=30101,Rach=301012 3775 RncFunction=1,UtranCell=30101 4636 RncFunction=1,LocationArea=3015,ServiceArea=1001 4693 RncFunction=1,IubLink=1,NbapCommon=1 4692 RncFunction=1,IubLink=1,NbapDedicated=1 4696 RncFunction=1,IubLink=1,NodeSynchTp=1 4695 RncFunction=1,IubLink=1,NodeSynchTp=2 4694 RncFunction=1,IubLink=1,NodeSynch=1 4691 RncFunction=1,IubLink=1 1916 TransportNetwork=1,Aal2RoutingCase=Iub1 1993 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1 1992 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1 1867 TransportNetwork=1,Aal2PathVccTp=Iub1-1 1864 TransportNetwork=1,Aal2PathVccTp=Iub1-2 1861 TransportNetwork=1,Aal2PathVccTp=Iub1-3 1816 TransportNetwork=1,UniSaalTp=1 1815 TransportNetwork=1,UniSaalTp=2 1814 TransportNetwork=1,UniSaalTp=3 1813 TransportNetwork=1,UniSaalTp=4 1812 TransportNetwork=1,UniSaalTp=5 1811 TransportNetwork=1,UniSaalTp=6 2156 TransportNetwork=1,Aal0TpVccTp=1 2155 TransportNetwork=1,Aal0TpVccTp=2 1966 TransportNetwork=1,Aal5TpVccTp=1 1965 TransportNetwork=1,Aal5TpVccTp=2 1964 TransportNetwork=1,Aal5TpVccTp=3 1963 TransportNetwork=1,Aal5TpVccTp=4 1962 TransportNetwork=1,Aal5TpVccTp=5 1961 TransportNetwork=1,Aal5TpVccTp=6 1693 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc34 1692 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc35 1691 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc36 1690 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc37 1689 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc38 1688 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc39 1687 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc40 1686 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc43


1685 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc44 1684 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc45===================================================================================Are you Sure [y/n] ? y

Deleting ...=================================================================================== 3776 RncFunction=1,UtranCell=30101,UtranRelation=30101_30103_softer_wo >>> Mo deleted 3764 RncFunction=1,UtranCell=30102,UtranRelation=30102_30103_softer_wo >>> Mo deleted 3755 RncFunction=1,UtranCell=30103,UtranRelation=30103_30102_softer_wo >>> Mo deleted 3756 RncFunction=1,UtranCell=30103,UtranRelation=30103_301107_soft_wo >>> Mo deleted 3760 RncFunction=1,UtranCell=30103,UtranRelation=30103_30165_soft_wo >>> Mo deleted 3761 RncFunction=1,UtranCell=30103,UtranRelation=30103_30166_soft_wo >>> Mo deleted 3757 RncFunction=1,UtranCell=30103,UtranRelation=30103_30185_soft_wo >>> Mo deleted 3758 RncFunction=1,UtranCell=30103,UtranRelation=30103_30186_soft_wo >>> Mo deleted 3759 RncFunction=1,UtranCell=30103,UtranRelation=30103_30187_soft_wo >>> Mo deleted 4419 RncFunction=1,UtranCell=301107,UtranRelation=301107_30103_soft_wo >>> Mo deleted 3001 RncFunction=1,UtranCell=30165,UtranRelation=30165_30103_soft_wo >>> Mo deleted 2992 RncFunction=1,UtranCell=30166,UtranRelation=30166_30103_soft_wo >>> Mo deleted 2766 RncFunction=1,UtranCell=30185,UtranRelation=30185_30103_soft_wo >>> Mo deleted 2740 RncFunction=1,UtranCell=30187,UtranRelation=30187_30103_soft_wo >>> Mo deleted 3752 RncFunction=1,UtranCell=30103,Fach=301030 >>> Mo deleted 3753 RncFunction=1,UtranCell=30103,Hsdsch=301034 >>> Mo deleted 3754 RncFunction=1,UtranCell=30103,Pch=301033 >>> Mo deleted 3762 RncFunction=1,UtranCell=30103,Rach=301032 >>> Mo deleted 3751 RncFunction=1,UtranCell=30103 >>> Mo deleted 4637 RncFunction=1,LocationArea=3015,RoutingArea=11 !!!! Processing failure :se.ericsson.wcdma.rnc.roam.mao.commonmo.ProcessingFailureException TAG :"ProcessingFailureException" VARIABLES :"$Message" = "RoutingArea could not be deleted, there are still references in reservedBy ! " 4634 RncFunction=1,LocationArea=3015,ServiceArea=1003 >>> Mo deleted 3766 RncFunction=1,UtranCell=30102,UtranRelation=30102_301106_soft_wo >>> Mo deleted 3774 RncFunction=1,UtranCell=30102,UtranRelation=30102_30123_soft_wo >>> Mo deleted 3772 RncFunction=1,UtranCell=30102,UtranRelation=30102_30144_soft_wo >>> Mo deleted 3773 RncFunction=1,UtranCell=30102,UtranRelation=30102_30145_soft_wo >>> Mo deleted 3769 RncFunction=1,UtranCell=30102,UtranRelation=30102_30165_soft_wo >>> Mo deleted 3770 RncFunction=1,UtranCell=30102,UtranRelation=30102_30166_soft_wo >>> Mo deleted 4434 RncFunction=1,UtranCell=301106,UtranRelation=301106_30102_soft_wo >>> Mo deleted 3519 RncFunction=1,UtranCell=30123,UtranRelation=30123_30102_soft_wo >>> Mo deleted 3253 RncFunction=1,UtranCell=30144,CoverageRelation=30144_30102 >>> Mo deleted 3256 RncFunction=1,UtranCell=30144,UtranRelation=30144_30102_soft_wo >>> Mo deleted 3236 RncFunction=1,UtranCell=30145,UtranRelation=30145_30102_soft_wo >>> Mo deleted 3004 RncFunction=1,UtranCell=30165,UtranRelation=30165_30102_soft_wo >>> Mo deleted 2990 RncFunction=1,UtranCell=30166,UtranRelation=30166_30102_soft_wo >>> Mo deleted 3771 RncFunction=1,UtranCell=30102,Fach=301020 >>> Mo deleted


3767 RncFunction=1,UtranCell=30102,Hsdsch=301024 >>> Mo deleted 3765 RncFunction=1,UtranCell=30102,Pch=301023 >>> Mo deleted 3768 RncFunction=1,UtranCell=30102,Rach=301022 >>> Mo deleted 3763 RncFunction=1,UtranCell=30102 >>> Mo deleted 4635 RncFunction=1,LocationArea=3015,ServiceArea=1002 >>> Mo deleted 3781 RncFunction=1,UtranCell=30101,UtranRelation=30101_301106_soft_wo >>> Mo deleted 3777 RncFunction=1,UtranCell=30101,UtranRelation=30101_30122_soft_wo >>> Mo deleted 3778 RncFunction=1,UtranCell=30101,UtranRelation=30101_30123_soft_wo >>> Mo deleted 3779 RncFunction=1,UtranCell=30101,UtranRelation=30101_30124_soft_wo >>> Mo deleted 3786 RncFunction=1,UtranCell=30101,UtranRelation=30101_30143_soft_wo >>> Mo deleted 3784 RncFunction=1,UtranCell=30101,UtranRelation=30101_30164_soft_wo >>> Mo deleted 4433 RncFunction=1,UtranCell=301106,UtranRelation=301106_30101_soft_wo >>> Mo deleted 3532 RncFunction=1,UtranCell=30122,UtranRelation=30122_30101_soft_wo >>> Mo deleted 3518 RncFunction=1,UtranCell=30123,UtranRelation=30123_30101_soft_wo >>> Mo deleted 3507 RncFunction=1,UtranCell=30124,UtranRelation=30124_30101_soft_wo >>> Mo deleted 3260 RncFunction=1,UtranCell=30143,UtranRelation=30143_30101_soft_wo >>> Mo deleted 3014 RncFunction=1,UtranCell=30164,UtranRelation=30164_30101_soft_wo >>> Mo deleted 3783 RncFunction=1,UtranCell=30101,Fach=301010 >>> Mo deleted 3785 RncFunction=1,UtranCell=30101,Hsdsch=301014 >>> Mo deleted 3780 RncFunction=1,UtranCell=30101,Pch=301013 >>> Mo deleted 3782 RncFunction=1,UtranCell=30101,Rach=301012 >>> Mo deleted 3775 RncFunction=1,UtranCell=30101 >>> Mo deleted 4636 RncFunction=1,LocationArea=3015,ServiceArea=1001 >>> Mo deleted 4693 RncFunction=1,IubLink=1,NbapCommon=1 >>> Mo deleted 4692 RncFunction=1,IubLink=1,NbapDedicated=1 >>> Mo deleted 4696 RncFunction=1,IubLink=1,NodeSynchTp=1 >>> Mo deleted 4695 RncFunction=1,IubLink=1,NodeSynchTp=2 >>> Mo deleted 4694 RncFunction=1,IubLink=1,NodeSynch=1 >>> Mo deleted 4691 RncFunction=1,IubLink=1 >>> Mo deleted 1916 TransportNetwork=1,Aal2RoutingCase=Iub1 >>> Mo deleted 1993 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1 >>> Mo deleted 1992 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1 >>> Mo deleted 1867 TransportNetwork=1,Aal2PathVccTp=Iub1-1 >>> Mo deleted 1864 TransportNetwork=1,Aal2PathVccTp=Iub1-2 >>> Mo deleted 1861 TransportNetwork=1,Aal2PathVccTp=Iub1-3 >>> Mo deleted 1816 TransportNetwork=1,UniSaalTp=1 >>> Mo deleted 1815 TransportNetwork=1,UniSaalTp=2 >>> Mo deleted 1814 TransportNetwork=1,UniSaalTp=3 >>> Mo deleted 1813 TransportNetwork=1,UniSaalTp=4 >>> Mo deleted 1812 TransportNetwork=1,UniSaalTp=5 >>> Mo deleted 1811 TransportNetwork=1,UniSaalTp=6 >>> Mo deleted 2156 TransportNetwork=1,Aal0TpVccTp=1 >>> Mo deleted 2155 TransportNetwork=1,Aal0TpVccTp=2 >>> Mo deleted 1966 TransportNetwork=1,Aal5TpVccTp=1 >>> Mo deleted 1965 TransportNetwork=1,Aal5TpVccTp=2 >>> Mo deleted


1964 TransportNetwork=1,Aal5TpVccTp=3 >>> Mo deleted 1963 TransportNetwork=1,Aal5TpVccTp=4 >>> Mo deleted 1962 TransportNetwork=1,Aal5TpVccTp=5 >>> Mo deleted 1961 TransportNetwork=1,Aal5TpVccTp=6 >>> Mo deleted 1693 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc34 >>> Mo deleted 1692 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc35 >>> Mo deleted 1691 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc36 >>> Mo deleted 1690 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc37 >>> Mo deleted 1689 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc38 >>> Mo deleted 1688 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc39 >>> Mo deleted 1687 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc40 >>> Mo deleted 1686 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc43 >>> Mo deleted 1685 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc44 >>> Mo deleted 1684 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc45 >>> Mo deleted===================================================================================Total: 94 MOs attempted, 93 MOs deleted

3.15 undo commands

When undo mode is active (activate with “u+”), all MO commands which affect the configuration data (del/rdel/set/bl/deb/cr/acc) are logged and a MO script will be generated to undo the operations if necessary.


Recursive Delete following MOs ?=================================================================================== 4691 RncFunction=1,IubLink=1===================================================================================Warning: Undo Mode is currently inactive !!!!Are you Sure [y/n] ? n

RNC11> u+

Logging cr/del/rdel/set/bl/deb/acc commands to file: /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_060709-001748.log


Recursive Delete following MOs ?=================================================================================== 4691 RncFunction=1,IubLink=1


===================================================================================Are you Sure [y/n] ? y..Delete following MOs ?=================================================================================== 3776 RncFunction=1,UtranCell=30101,UtranRelation=30101_30103_softer_wo 3764 RncFunction=1,UtranCell=30102,UtranRelation=30102_30103_softer_wo 3755 RncFunction=1,UtranCell=30103,UtranRelation=30103_30102_softer_wo 3756 RncFunction=1,UtranCell=30103,UtranRelation=30103_301107_soft_wo 3760 RncFunction=1,UtranCell=30103,UtranRelation=30103_30165_soft_wo 3761 RncFunction=1,UtranCell=30103,UtranRelation=30103_30166_soft_wo 3757 RncFunction=1,UtranCell=30103,UtranRelation=30103_30185_soft_wo 3758 RncFunction=1,UtranCell=30103,UtranRelation=30103_30186_soft_wo 3759 RncFunction=1,UtranCell=30103,UtranRelation=30103_30187_soft_wo 4419 RncFunction=1,UtranCell=301107,UtranRelation=301107_30103_soft_wo 3001 RncFunction=1,UtranCell=30165,UtranRelation=30165_30103_soft_wo 2992 RncFunction=1,UtranCell=30166,UtranRelation=30166_30103_soft_wo 2766 RncFunction=1,UtranCell=30185,UtranRelation=30185_30103_soft_wo 2740 RncFunction=1,UtranCell=30187,UtranRelation=30187_30103_soft_wo 3752 RncFunction=1,UtranCell=30103,Fach=301030 3753 RncFunction=1,UtranCell=30103,Hsdsch=301034 3754 RncFunction=1,UtranCell=30103,Pch=301033 3762 RncFunction=1,UtranCell=30103,Rach=301032 3751 RncFunction=1,UtranCell=30103 4637 RncFunction=1,LocationArea=3015,RoutingArea=11 4634 RncFunction=1,LocationArea=3015,ServiceArea=1003 3766 RncFunction=1,UtranCell=30102,UtranRelation=30102_301106_soft_wo 3774 RncFunction=1,UtranCell=30102,UtranRelation=30102_30123_soft_wo 3772 RncFunction=1,UtranCell=30102,UtranRelation=30102_30144_soft_wo 3773 RncFunction=1,UtranCell=30102,UtranRelation=30102_30145_soft_wo 3769 RncFunction=1,UtranCell=30102,UtranRelation=30102_30165_soft_wo 3770 RncFunction=1,UtranCell=30102,UtranRelation=30102_30166_soft_wo 4434 RncFunction=1,UtranCell=301106,UtranRelation=301106_30102_soft_wo 3519 RncFunction=1,UtranCell=30123,UtranRelation=30123_30102_soft_wo 3253 RncFunction=1,UtranCell=30144,CoverageRelation=30144_30102 3256 RncFunction=1,UtranCell=30144,UtranRelation=30144_30102_soft_wo 3236 RncFunction=1,UtranCell=30145,UtranRelation=30145_30102_soft_wo 3004 RncFunction=1,UtranCell=30165,UtranRelation=30165_30102_soft_wo 2990 RncFunction=1,UtranCell=30166,UtranRelation=30166_30102_soft_wo 3771 RncFunction=1,UtranCell=30102,Fach=301020 3767 RncFunction=1,UtranCell=30102,Hsdsch=301024 3765 RncFunction=1,UtranCell=30102,Pch=301023 3768 RncFunction=1,UtranCell=30102,Rach=301022 3763 RncFunction=1,UtranCell=30102 4635 RncFunction=1,LocationArea=3015,ServiceArea=1002


3781 RncFunction=1,UtranCell=30101,UtranRelation=30101_301106_soft_wo 3777 RncFunction=1,UtranCell=30101,UtranRelation=30101_30122_soft_wo 3778 RncFunction=1,UtranCell=30101,UtranRelation=30101_30123_soft_wo 3779 RncFunction=1,UtranCell=30101,UtranRelation=30101_30124_soft_wo 3786 RncFunction=1,UtranCell=30101,UtranRelation=30101_30143_soft_wo 3784 RncFunction=1,UtranCell=30101,UtranRelation=30101_30164_soft_wo 4433 RncFunction=1,UtranCell=301106,UtranRelation=301106_30101_soft_wo 3532 RncFunction=1,UtranCell=30122,UtranRelation=30122_30101_soft_wo 3518 RncFunction=1,UtranCell=30123,UtranRelation=30123_30101_soft_wo 3507 RncFunction=1,UtranCell=30124,UtranRelation=30124_30101_soft_wo 3260 RncFunction=1,UtranCell=30143,UtranRelation=30143_30101_soft_wo 3014 RncFunction=1,UtranCell=30164,UtranRelation=30164_30101_soft_wo 3783 RncFunction=1,UtranCell=30101,Fach=301010 3785 RncFunction=1,UtranCell=30101,Hsdsch=301014 3780 RncFunction=1,UtranCell=30101,Pch=301013 3782 RncFunction=1,UtranCell=30101,Rach=301012 3775 RncFunction=1,UtranCell=30101 4636 RncFunction=1,LocationArea=3015,ServiceArea=1001 4693 RncFunction=1,IubLink=1,NbapCommon=1 4692 RncFunction=1,IubLink=1,NbapDedicated=1 4696 RncFunction=1,IubLink=1,NodeSynchTp=1 4695 RncFunction=1,IubLink=1,NodeSynchTp=2 4694 RncFunction=1,IubLink=1,NodeSynch=1 4691 RncFunction=1,IubLink=1 1916 TransportNetwork=1,Aal2RoutingCase=Iub1 1993 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1 1992 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1 1867 TransportNetwork=1,Aal2PathVccTp=Iub1-1 1864 TransportNetwork=1,Aal2PathVccTp=Iub1-2 1861 TransportNetwork=1,Aal2PathVccTp=Iub1-3 1816 TransportNetwork=1,UniSaalTp=1 1815 TransportNetwork=1,UniSaalTp=2 1814 TransportNetwork=1,UniSaalTp=3 1813 TransportNetwork=1,UniSaalTp=4 1812 TransportNetwork=1,UniSaalTp=5 1811 TransportNetwork=1,UniSaalTp=6 2156 TransportNetwork=1,Aal0TpVccTp=1 2155 TransportNetwork=1,Aal0TpVccTp=2 1966 TransportNetwork=1,Aal5TpVccTp=1 1965 TransportNetwork=1,Aal5TpVccTp=2 1964 TransportNetwork=1,Aal5TpVccTp=3 1963 TransportNetwork=1,Aal5TpVccTp=4 1962 TransportNetwork=1,Aal5TpVccTp=5 1961 TransportNetwork=1,Aal5TpVccTp=6 1693 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc34


1692 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc35 1691 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc36 1690 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc37 1689 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc38 1688 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc39 1687 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc40 1686 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc43 1685 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc44 1684 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc45===================================================================================Are you Sure [y/n] ? y

Deleting ...=================================================================================== 3776 RncFunction=1,UtranCell=30101,UtranRelation=30101_30103_softer_wo >>> Mo deleted 3764 RncFunction=1,UtranCell=30102,UtranRelation=30102_30103_softer_wo >>> Mo deleted 3755 RncFunction=1,UtranCell=30103,UtranRelation=30103_30102_softer_wo >>> Mo deleted 3756 RncFunction=1,UtranCell=30103,UtranRelation=30103_301107_soft_wo >>> Mo deleted 3760 RncFunction=1,UtranCell=30103,UtranRelation=30103_30165_soft_wo >>> Mo deleted 3761 RncFunction=1,UtranCell=30103,UtranRelation=30103_30166_soft_wo >>> Mo deleted 3757 RncFunction=1,UtranCell=30103,UtranRelation=30103_30185_soft_wo >>> Mo deleted 3758 RncFunction=1,UtranCell=30103,UtranRelation=30103_30186_soft_wo >>> Mo deleted 3759 RncFunction=1,UtranCell=30103,UtranRelation=30103_30187_soft_wo >>> Mo deleted 4419 RncFunction=1,UtranCell=301107,UtranRelation=301107_30103_soft_wo >>> Mo deleted 3001 RncFunction=1,UtranCell=30165,UtranRelation=30165_30103_soft_wo >>> Mo deleted 2992 RncFunction=1,UtranCell=30166,UtranRelation=30166_30103_soft_wo >>> Mo deleted 2766 RncFunction=1,UtranCell=30185,UtranRelation=30185_30103_soft_wo >>> Mo deleted 2740 RncFunction=1,UtranCell=30187,UtranRelation=30187_30103_soft_wo >>> Mo deleted 3752 RncFunction=1,UtranCell=30103,Fach=301030 >>> Mo deleted 3753 RncFunction=1,UtranCell=30103,Hsdsch=301034 >>> Mo deleted 3754 RncFunction=1,UtranCell=30103,Pch=301033 >>> Mo deleted 3762 RncFunction=1,UtranCell=30103,Rach=301032 >>> Mo deleted 3751 RncFunction=1,UtranCell=30103 >>> Mo deleted 4637 RncFunction=1,LocationArea=3015,RoutingArea=11 !!!! Processing failure :se.ericsson.wcdma.rnc.roam.mao.commonmo.ProcessingFailureException TAG :"ProcessingFailureException" VARIABLES :"$Message" = "RoutingArea could not be deleted, there are still references in reservedBy ! " 4634 RncFunction=1,LocationArea=3015,ServiceArea=1003 >>> Mo deleted 3766 RncFunction=1,UtranCell=30102,UtranRelation=30102_301106_soft_wo >>> Mo deleted 3774 RncFunction=1,UtranCell=30102,UtranRelation=30102_30123_soft_wo >>> Mo deleted 3772 RncFunction=1,UtranCell=30102,UtranRelation=30102_30144_soft_wo >>> Mo deleted 3773 RncFunction=1,UtranCell=30102,UtranRelation=30102_30145_soft_wo >>> Mo deleted 3769 RncFunction=1,UtranCell=30102,UtranRelation=30102_30165_soft_wo >>> Mo deleted 3770 RncFunction=1,UtranCell=30102,UtranRelation=30102_30166_soft_wo >>> Mo deleted 4434 RncFunction=1,UtranCell=301106,UtranRelation=301106_30102_soft_wo >>> Mo deleted


3519 RncFunction=1,UtranCell=30123,UtranRelation=30123_30102_soft_wo >>> Mo deleted 3253 RncFunction=1,UtranCell=30144,CoverageRelation=30144_30102 >>> Mo deleted 3256 RncFunction=1,UtranCell=30144,UtranRelation=30144_30102_soft_wo >>> Mo deleted 3236 RncFunction=1,UtranCell=30145,UtranRelation=30145_30102_soft_wo >>> Mo deleted 3004 RncFunction=1,UtranCell=30165,UtranRelation=30165_30102_soft_wo >>> Mo deleted 2990 RncFunction=1,UtranCell=30166,UtranRelation=30166_30102_soft_wo >>> Mo deleted 3771 RncFunction=1,UtranCell=30102,Fach=301020 >>> Mo deleted 3767 RncFunction=1,UtranCell=30102,Hsdsch=301024 >>> Mo deleted 3765 RncFunction=1,UtranCell=30102,Pch=301023 >>> Mo deleted 3768 RncFunction=1,UtranCell=30102,Rach=301022 >>> Mo deleted 3763 RncFunction=1,UtranCell=30102 >>> Mo deleted 4635 RncFunction=1,LocationArea=3015,ServiceArea=1002 >>> Mo deleted 3781 RncFunction=1,UtranCell=30101,UtranRelation=30101_301106_soft_wo >>> Mo deleted 3777 RncFunction=1,UtranCell=30101,UtranRelation=30101_30122_soft_wo >>> Mo deleted 3778 RncFunction=1,UtranCell=30101,UtranRelation=30101_30123_soft_wo >>> Mo deleted 3779 RncFunction=1,UtranCell=30101,UtranRelation=30101_30124_soft_wo >>> Mo deleted 3786 RncFunction=1,UtranCell=30101,UtranRelation=30101_30143_soft_wo >>> Mo deleted 3784 RncFunction=1,UtranCell=30101,UtranRelation=30101_30164_soft_wo >>> Mo deleted 4433 RncFunction=1,UtranCell=301106,UtranRelation=301106_30101_soft_wo >>> Mo deleted 3532 RncFunction=1,UtranCell=30122,UtranRelation=30122_30101_soft_wo >>> Mo deleted 3518 RncFunction=1,UtranCell=30123,UtranRelation=30123_30101_soft_wo >>> Mo deleted 3507 RncFunction=1,UtranCell=30124,UtranRelation=30124_30101_soft_wo >>> Mo deleted 3260 RncFunction=1,UtranCell=30143,UtranRelation=30143_30101_soft_wo >>> Mo deleted 3014 RncFunction=1,UtranCell=30164,UtranRelation=30164_30101_soft_wo >>> Mo deleted 3783 RncFunction=1,UtranCell=30101,Fach=301010 >>> Mo deleted 3785 RncFunction=1,UtranCell=30101,Hsdsch=301014 >>> Mo deleted 3780 RncFunction=1,UtranCell=30101,Pch=301013 >>> Mo deleted 3782 RncFunction=1,UtranCell=30101,Rach=301012 >>> Mo deleted 3775 RncFunction=1,UtranCell=30101 >>> Mo deleted 4636 RncFunction=1,LocationArea=3015,ServiceArea=1001 >>> Mo deleted 4693 RncFunction=1,IubLink=1,NbapCommon=1 >>> Mo deleted 4692 RncFunction=1,IubLink=1,NbapDedicated=1 >>> Mo deleted 4696 RncFunction=1,IubLink=1,NodeSynchTp=1 >>> Mo deleted 4695 RncFunction=1,IubLink=1,NodeSynchTp=2 >>> Mo deleted 4694 RncFunction=1,IubLink=1,NodeSynch=1 >>> Mo deleted 4691 RncFunction=1,IubLink=1 >>> Mo deleted 1916 TransportNetwork=1,Aal2RoutingCase=Iub1 >>> Mo deleted 1993 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1 >>> Mo deleted 1992 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1 >>> Mo deleted 1867 TransportNetwork=1,Aal2PathVccTp=Iub1-1 >>> Mo deleted 1864 TransportNetwork=1,Aal2PathVccTp=Iub1-2 >>> Mo deleted 1861 TransportNetwork=1,Aal2PathVccTp=Iub1-3 >>> Mo deleted 1816 TransportNetwork=1,UniSaalTp=1 >>> Mo deleted 1815 TransportNetwork=1,UniSaalTp=2 >>> Mo deleted 1814 TransportNetwork=1,UniSaalTp=3 >>> Mo deleted


1813 TransportNetwork=1,UniSaalTp=4 >>> Mo deleted 1812 TransportNetwork=1,UniSaalTp=5 >>> Mo deleted 1811 TransportNetwork=1,UniSaalTp=6 >>> Mo deleted 2156 TransportNetwork=1,Aal0TpVccTp=1 >>> Mo deleted 2155 TransportNetwork=1,Aal0TpVccTp=2 >>> Mo deleted 1966 TransportNetwork=1,Aal5TpVccTp=1 >>> Mo deleted 1965 TransportNetwork=1,Aal5TpVccTp=2 >>> Mo deleted 1964 TransportNetwork=1,Aal5TpVccTp=3 >>> Mo deleted 1963 TransportNetwork=1,Aal5TpVccTp=4 >>> Mo deleted 1962 TransportNetwork=1,Aal5TpVccTp=5 >>> Mo deleted 1961 TransportNetwork=1,Aal5TpVccTp=6 >>> Mo deleted 1693 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc34 >>> Mo deleted 1692 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc35 >>> Mo deleted 1691 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc36 >>> Mo deleted 1690 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc37 >>> Mo deleted 1689 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc38 >>> Mo deleted 1688 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc39 >>> Mo deleted 1687 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc40 >>> Mo deleted 1686 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc43 >>> Mo deleted 1685 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc44 >>> Mo deleted 1684 TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc45 >>> Mo deleted===================================================================================Total: 94 MOs attempted, 93 MOs deleted

RNC11> u-

To undo, execute command: run /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_060709-001748.mos

RNC11> l cat $undocommandfile

#### Undo Script ####confb+gs+

cr TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc4545 #externalVciAtmTrafficDescriptor=U3P1000M80 #atmTrafficDescriptorIdlset TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc45$ userLabel

cr TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc4444 #externalVciAtmTrafficDescriptor=U3P1000M80 #atmTrafficDescriptorIdlset TransportNetwork=1,AtmPort=MS-26-1,VplTp=1,VpcTp=1,VclTp=vc44$ userLabel etc.....


Simulated undo mode for script generation

RNC11> u+s


RNC11> del iublink=10

Delete following MOs ?=================================================================================== 4879 RncFunction=1,IubLink=10===================================================================================Note: Running in Simulated Undo mode. No actual deletion will be performed !!!!Are you Sure [y/n] ? y

Getting Attributes...===================================================================================...<cut>...

Deleting ...=================================================================================== 4879 RncFunction=1,IubLink=10 >>> Simulated MO deletion===================================================================================Total: 1 MOs attempted, 1 MOs deleted

RNC11> u-

Delete file: /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_060709-002556_del.mos

To undo, execute command: run /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_060709-002556.mos

RNC11> u+s


RNC11> rdel 2507

Recursive Delete following MOs ?=================================================================================== 2507 TransportNetwork=1,AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100===================================================================================Note: Running in Simulated Undo mode. No actual deletion will be performed !!!!


Are you Sure [y/n] ? y........Delete following MOs ?=================================================================================== 1991 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1 1859 TransportNetwork=1,Aal2PathVccTp=Iub1-3 2507 TransportNetwork=1,AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100===================================================================================Note: Running in Simulated Undo mode. No actual deletion will be performed !!!!Are you Sure [y/n] ? y

Getting Attributes...===================================================================================

...<cut>...

Deleting ...=================================================================================== 1991 TransportNetwork=1,Aal2Sp=1,Aal2Ap=Iub1,Aal2PathDistributionUnit=Iub1 >>> Simulated MO deletion 1859 TransportNetwork=1,Aal2PathVccTp=Iub1-3 >>> Simulated MO deletion 2507 TransportNetwork=1,AtmPort=MS-27-1,VplTp=1,VpcTp=1,VclTp=vc100 >>> Simulated MO deletion===================================================================================Total: 3 MOs attempted, 3 MOs deleted

RNC11> u-

Delete file: /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_061003-112724_del.mos ($undodelcommandfile)

To undo, execute command: run /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_061003-112724.mos ($undocommandfile)

To generate the command file in EMAS/MoTester format:

RNC11> u! $undocommandfile

To generate the moshell command file from undo log (in case user lost contact to moshell session before running u-):

RNC11> u! $undologfile

Example:

RNC11> u+s



RNC11> del 11

Delete following MOs ?=================================================================================== 11 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1===================================================================================Note: Running in Simulated Undo mode. No actual deletion will be performed !!!!Are you Sure [y/n] ? y

Getting Attributes...===================================================================================

=================================================================================================================MO Attribute Value=================================================================================================================Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 PlugInUnitId 1Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 administrativeState 1 (UNLOCKED)Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 allowedSeqRestarts 3 (RESTARTS_WITH_WARM)Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 availabilityStatus 0 (NO_STATUS)Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 hwTestResult 2007-05-22 08:18:41 Others No Test ResultsEquipment=1,Subrack=MS,Slot=28,PlugInUnit=1 hwTestStatus 0 (NO_TEST_RESULTS)Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 operationalState 1 (ENABLED)Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 piuGroupNumber 8Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 piuType PiuType=ROJ1192108/2_R6Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 productType HWEquipment=1,Subrack=MS,Slot=28,PlugInUnit=1 reservedBy [0] = Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 userLabel =================================================================================================================Total: 1 MOs

Deleting ...=================================================================================== 11 Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 >>> Simulated MO deletion===================================================================================Total: 1 MOs attempted, 1 MOs deleted

RNC11> u-


Delete file: /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_070604-114040_del.mos ($undodelcommandfile)

To undo, execute command: run /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_070604-114040.mos ($undocommandfile)

Note: to convert command files from moshell format to trun/emas format, execute the command: u! <commandfile>

RNC11> l cat /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_070604-114040.mos

#DoNotEditThisLine: UndoCommandFile 137.58.194.88 7.0n RNC_NODE_MODEL_G_1_4_COMPLETE stopfile=/tmp/26637

confb+gs+

cr Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1PiuType=ROJ1192108/2_R6 #piuTypelset Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1$ administrativeState 1 lset Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1$ piuGroupNumber 8lset Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1$ userLabel lset Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1$ allowedSeqRestarts 3 confb-gs-

RNC11> u! /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_070604-114040.mos

Result saved to: /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_070604-114040.mo ($undotrunfile).

RNC11> l cat /home/eanzmagn/moshell_logfiles/logs_moshell/undo/undo_RNC11_070604-114040.mo

CREATE( parent "ManagedElement=1,Equipment=1,Subrack=MS,Slot=28" identity "1" moType PlugInUnit exception none nrOfAttributes 1 piuType Ref "ManagedElement=1,SwManagement=1,PiuType=ROJ1192108/2_R6")SET( mo "ManagedElement=1,Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1" exception none administrativeState Integer 1)SET


( mo "ManagedElement=1,Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1" exception none piuGroupNumber Integer 8)SET( mo "ManagedElement=1,Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1" exception none userLabel String "")SET( mo "ManagedElement=1,Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1" exception none allowedSeqRestarts Integer 3)

3.16 run command

Purpose: To run a command file that contains moshell commands. No confirmations are needed in the command file. RNC11> h run

*******************************************************run <command file> [<var1>] [<var2>] ...*******************************************************The command file layout is the same as for monode and mobatch. See examples in moshell/example/mobatch_cmdfilesIt shall contain all lines to be sent to the moshell prompt, including password (for ose commands), but NOT confirmations ("y").This applies to commands such as "lt/ltc", "lc/lcc", "del", "bl", "set", where confirmation is automatically entered when running a command file.Comments can be put in the command file using the # sign.By typing <TAB>, the unix file system is displayed, making it easier to find the location of the command file.If some arguments are given after the command file, the scripting variables $1, $2, $3, etc. will be set to the corresponding values. Type "h scripting" for info.

EXAMPLE:cr RncFunction=1,IubLink=1010 #rbsIdSubrack=MS #preferredSubrackReflset RncFunction=1,IubLink=10$ ulHwAdm 100cvms new_iubacc 0 restart0


pol

Example:run /home/eanzmagn/cmdfiles/setcells.mos

3.17 trun command

Purpose: to run a command file written in EMAS/MoTester format

RNC11> h trun

*******************************************************trun[is1] <moScript>|<http://ipaddress/script>*******************************************************Run a command file in EMAS/MoTester format.

Execute a command file in EMAS/MoTester format.By typing <TAB>, the unix file system is displayed, making it easier to find the location of the command file.It is also possible to specify a file located on a web server (eg. when the script is located on the CPP node).The following commands are supported: ECHO, CREATE, SET, DELETE, ACTION, CHECK, CALL, WAIT.Lines can be commented out by adding // at the beginning of each line.See examples below. For more info, refer to MoTester documentation on http://utran01.au.ao.ericsson.se/moshell/training/references/cpp/runMoTester.html .By default, the command file halts when a command fails.

Options: - i: ignore exceptions, the execution does not halt when a command fails. - s: simulated run, the command file execution is simulated, no commands are actually executed on the node. Can be used to verify the syntax of a script prior to running it for real. The simulated mode is always used in "offline mode" or "simulated undo mode", regardless of the "trun" options. - 1: execute the whole script in one transaction. This option should be used with great care and only when absolutely necessary (e.g. when changing IP address of the node, see example script in moshell/examples/misc/ip_change.mo). In regular usage, it is recommended to not use this option as it has been observed to cause database corruptions in certain cases.

Script example: ECHO "Start Test" CREATE ( parent "ManagedElement=1,SwManagement=1" identity "ROJ1192104_3_R4" moType PiuType exception none


nrOfAttributes 3 productData Struct nrOfElements 5 productNumber String "ROJ1192104/3" productRevision String "R4" productName String "TUB" productInfo String "TU" productionDate String "20030116" boardWidth Integer 3 role Integer 2 ) DELETE ( mo "ManagedElement=1,SwManagement=1,PiuType=ROJ1192104_3_R4" exception none ) SET ( mo "ManagedElement=1,Equipment=1,Jvm=1" exception none admClasspath Array Reference 4 "ManagedElement=1,SwManagement=1,LoadModule=Oms" "ManagedElement=1,SwManagement=1,LoadModule=Asms" "ManagedElement=1,SwManagement=1,LoadModule=VbjOrb" "ManagedElement=1,SwManagement=1,LoadModule=Cma" ) ACTION ( actionName addRepertoire mo "ManagedElement=1,SwManagement=1,SwAllocation=TB_LLP" exception none nrOfParameters 1 Ref "ManagedElement=1,SwManagement=1,Repertoire=Cello_Common_MP" returnValue ignore ) //wait 2 seconds (time given in milliseconds) WAIT 2000 //run another MO script CALL("/home/eric/scripts/newfile.mo")

3.18 al command

OFFLINE> h al


*******************************************************al[atkc] [ | <unix cmds>]*******************************************************Print the list of active alarms.....

Basic alarm information, showing four fields per alarm:

RNC11> al

Connecting to 137.58.194.147:56834 (CorbaSecurity=OFF, corba_class=2, jarcorb=R71S08, jacsec=R71S08, jacoms=R71J18)Trying file=/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20081128-131838_23227/ior23227Resolving the alarm service in OMS...Simple Alarm Client initialized...Starting to retrieve active alarmsNr of active alarms are: 3====================================================================================================================Sever Specific Problem MO (Cause/AdditionalInfo)====================================================================================================================Maj Loss of Signal Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2 (loss_of_signal)Maj Loss of Signal Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1 (loss_of_signal)Maj TU Synch Reference Loss of Signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 (loss_of_signal)>>> Total: 3 Alarms (0 Critical, 3 Major)

4 Possible alarm severities:- Critical- Major- minor- warning

Showing alarm timestamps:

RNC11> alt

Fetching IOR file...Done.Connecting to 137.58.194.147:56834 (CorbaSecurity=OFF, corba_class=2, jarcorb=R71S08, jacsec=R71S08, jacoms=R71J18)Trying file=/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20081128-131838_23227/ior23227Resolving the alarm service in OMS...Simple Alarm Client initialized...Starting to retrieve active alarmsNr of active alarms are: 6================================================================================================


Date & Time (Local) S Specific Problem Cause Mo-Reference================================================================================================2008-11-28 00:06:57 m Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1 2008-11-28 00:06:57 M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 2008-11-28 00:06:57 M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 2008-11-28 00:07:00 M Loss of Signal loss_of_signal Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1 2008-11-28 00:07:12 M Rach_NbapMessageFailure call_establishment_error UtranCell=Iub-3-2,Rach=1041 2008-11-28 00:10:40 M Plug-In Unit General Problem processor_problem_m3100 Subrack=MS,Slot=18,PlugInUnit=1 >>> Total: 6 Alarms (0 Critical, 5 Major)

Showing all alarm information, in CSV format:

RNC11> alc

Connecting to 137.58.194.147:56834 (CorbaSecurity=OFF, corba_class=2, jarcorb=R71S08, jacsec=R71S08, jacoms=R71J18)Trying file=/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20081128-131838_23227/ior23227Resolving the alarm service in OMS...Simple Alarm Client initialized...Starting to retrieve active alarmsNr of active alarms are: 6Date;Time;Severity;Object;Problem;Cause;AdditionalText;AckState;AlarmId;NotificationId2008-11-28;00:07:00;Major;ManagedElement=1,Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1;Loss of Signal;loss_of_signal;;Unacknowledged;_6;62008-11-28;00:10:40;Major;ManagedElement=1,Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1;Plug-In Unit General Problem;processor_problem_m3100;;Unacknowledged;_10;122008-11-28;00:07:12;Major;ManagedElement=1,RncFunction=1,UtranCell=Iub-3-2,Rach=1041;Rach_NbapMessageFailure;call_establishment_error;A Radio NW Service Impact nbapCause = message_not_compatible_with_receiver_state;Unacknowledged;_9;92008-11-28;00:06:57;Major;ManagedElement=1,Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1;TU Synch Reference Loss of Signal;loss_of_signal;;Unacknowledged;_2;22008-11-28;00:06:57;Major;ManagedElement=1,Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1;TU Synch Reference Loss of Signal;loss_of_signal;;Unacknowledged;_3;32008-11-28;00:06:57;Minor;ManagedElement=1,TransportNetwork=1,Synchronization=1;Loss of Synch Reference Redundancy;replaceable_unit_problem;;Unacknowledged;_1;1>>> Total: 6 Alarms (0 Critical, 5 Major)

Filtering alarms using grep:

RNC11> al | grep -i timing

Maj TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 Maj TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1

MGW1> al | grep Sctp

Min Remote IP Address Unreachable unavailable Sctp=SIGTR_12


MGW1> alc | grep Sctp

2009-12-03;12:55:32;Minor;SubNetwork=OSSETE2_ROOT_MO,MeContext=MGW1,ManagedElement=1,TransportNetwork=1,Sctp=SIGTR_12;Remote IP Address Unreachable;unavailable;userLabel = SIGTR_12 assocId = 6 localIpAddress1 = 10.201.0.30 localIpAddress1.prefixLength = 0 localPort = 2905 remoteIpAddress1 = 10.201.2.172 remoteIpAddress1.prefixLength = 0 remoteIpAddress2 = 10.201.12.172 remoteIpAddress2.prefixLength = 0 remotePort = 2905 unreachableIpIndex = 2;Unacknowledged;SubNetwork=OSSETE2_ROOT_MO,MeContext=MGW1_42;45

To fix an alarm, follow the ALARM OPIs: http://cpistore.ericsson.se or 26/1551-AXD10503/1

3.19 MO commands in o ffline mode

Take an MO dump of the node:

RNC11> dcgk

Getting MO data from node (8244 MOs). Please wait...0% ~50% ~100%.......................................................................................................

Successful storage of the MO dump to /home/eanzmagn/moshell_logfiles/logs_moshell/dcg/RNC11/090325_113852/RNC11_modump.zipFor offline processing, run: moshell <zipfile>.

Using an MO dump for investigating a node offline:

**:ws4264@~> moshell modumps/RNC11/090325_114224/RNC11_modump.zip

##################################################################### Welcome to MoShell 7.1n ## Finn Magnusson, Jan Pettersson ## http://utran01.au.ao.ericsson.se/moshell ## Contact: [email protected] ## [email protected] #####################################################################

unzip -ojq modumps/RNC11/090325_114224/RNC11_modump.zip -d /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-114443_23046/modump


http://cpistore.ericsson.se/

Found MO dump: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-114443_23046/modump/RNC11_dcg_k.log.gz

Parsing MOM (cached): /home/eanzmagn/jarxml/RNC_NODE_MODEL_G_5_30.xml.cache.gz ...............................................Done.Connected to OFFLINE_RNC11_modump.zip (ManagedElement=1)Last MO: 8243. Loaded 8243 MOs. Total: 8244 MOs.Preparing offline MIB:0% ~50% ~100%

...................................................................................................

HELP MENU : hQUIT : q

OFFLINE_RNC11_DCG_K> h

----------------------------------- COMMANDS SUPPORTED IN OFFLINE-MODE ----------------------------------mom[tcdr] Print description of MO classes, CM/FM attributes, actions, enums and structs.lt/ltc[1-9] Load MO tree (full or partial) and build proxy table.lu/llu Unload MOs from MO tree.pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell.ma/lma Add MO(s) to an MO group.mr/lmr Remove an MO group or remove MOs from an MO group (MOs will NOT be deleted, only the group).mp Print all defined MO groups.get/lget Read CM/FM attribute(s) from MO(s).hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).kget/lkget Display CM/FM attributes in exportable printout format.st/lst Print state of MOs (operationalState and administrativeState when applicable).prod Print productData of MO(s).lk/llk View all MO's linked to an MO, and their states (admState and opState).lko/llko Obsolete command, use lk/llk instead.set[m][c]/lset[m][c] Set an attribute value on one or several MO's.bl[s]/lbl[s] Lock or soft-lock MO(s).deb/ldeb Unlock MO(s).acl/lacl Lists available MO actions.acc/lacc Execute an MO action.cr Create an MO.del/ldel Delete MO(s).rdel/lrdel Delete MO(s) together with children and reserving MOs.s+/s-/s? Sort MO list in alphabetical order instead of proxy order.u+[s]/u-/u?/u! Handling of undo mode (for cr/del/rdel/set/bl/deb/acc commands). Can be used for generation of MO scripts as well.run Run a command file in moshell format.parsemom Parse an xml MOM file.cvls/cvmk/cvms/cvset/cvrm/cvcu/cvget/cvput/cvls1 CV backup handling: list, make local, make remote, remove, setstartable.inv[hr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.


stc[p][r] Display state and configuration of Atm/Tdm CrossConnections.std[ar] Display state and configuration of devices (RNC and MGW only).stv[b][r] Display state, user, and bandwidth usage for ATM ports and channels.stt[r] Display state and user of Physical Ports and Ds0Bundles.sti[bcpr] Display state and configuration of IP interfaces.diff/ldiff Parameter auditing or MO dump comparisons.str[12ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).lki Show repartition of the IubLinks' ATM resources (RNC only).lg[aevsyuoltdhmircfx] Fetching and/or processing of node logs (alarm, event, availability, system, etc)uv Print or change moshell configuration settings (also called "user variables").pv Print scripting variables.!/l Execute a unix command on the PC/workstation.l+[m][m][s][o]/l-/l? Open/close moshell logfiles.bo[r]/ba[swdp]/br[wd]/be[0-50]/bp Manage board groups that can be used for running COLI commands on multiple boards.hi Print history of moshell commands entered during the current session.time[t] Measure time taken by an moshell command or by each command in a moshell command file.lmid[c]/upid Print translation of loadmodule/upgradepackage product number or T&E error codes.p/w/pw/b Change moshell prompt and/or window title.prox Toggle display of proxy identities in printout of get <mo> <attribute> command.ul Toggle display of userlabel in st/lst and pget/lpget printout.conf[bld] Toggle confirmation on various MO commands.ip2d/d2ip Convert an IP address into the format used in the fRO (sql database) or vice-versa.h2d/d2h Convert an integer to hexadecimal or viceversa.h2b/b2h Convert a binary to hexadecimal or viceversa.wait Specify a delay in hrs, mins, secs, or rops. Similar to the unix "sleep" command (scripting).return Exit from a command file without exiting from moshell (scripting).print Print a line or variable (scripting).alias/unalias Print or define command aliases.q/by/exit/quit Exit moshell.pmom[acd]/lmom[c] Print description of PM counters (pmom) or log attributes (lmom, CDMA only).pmx[hfdn] Display counter values, extracted from the statistics ROP files.pmr[agf] Produce PM KPI reports, based on counter values in statistics ROP files and formulas in CPI documentation.emom Display list of events available for each kind of event-based scanner.----------------------------------- HELP CHAPTERS ----------------------------------0 Revision History1 Introduction2 Installation, and user settings3 Command syntax, regular expressions4 Command descriptions5 Lazy6 Scripting7 Utilities8 Server Maintenance9 Offline Mode and Multi Mode


Type: - h <command> to view command description, e.g: h pget - h <pattern> to view commands whose description match a string, e.g: h change.*prompt - h <chapter> to view a chapter, e.g: h 3

OFFLINE_RNC11_DCG_K> get 0

090325-11:48:01 OFFLINE_RNC11_modump.zip 7.1n RNC_NODE_MODEL_G_5_30 stopfile=/tmp/23079=================================================================================================================0 ManagedElement=1=================================================================================================================ManagedElementId 1applicationConfiguration t[0] = faultTolerantCoreStates s[2] = ManagedElement=1,Equipment=1,Subrack=MS,Slot=10,PlugInUnit=1;PassiveReady ManagedElement=1,Equipment=1,Subrack=MS,Slot=11,PlugInUnit=1;Active logicalName mimName RNC_NODE_MODEL_GproductName productNumber productRevision productType Nodesite userLabel RNC11=================================================================================================================Total: 1 MOs

OFFLINE_RNC11_DCG_K> st . dis

090325-11:47:56 OFFLINE_RNC11_modump.zip 7.1n RNC_NODE_MODEL_G_5_30 stopfile=/tmp/23079===================================================================================Proxy Adm State Op. State MO=================================================================================== 74 0 (LOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1 75 0 (DISABLED) Equipment=1,Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1,Vc4Ttp=1 83 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1 84 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=Cc 85 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=Cc,CcDevice=2 86 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=Pdr 87 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=Pdr,PdrDevice=1 88 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=Dc 89 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=Dc,DcDevice=5 90 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=Dc,DcDevice=4 91 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=Dc,DcDevice=3


96 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,Spu=1 97 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,Spu=1,Spm=5 101 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,Spu=1,Spm=4 105 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,Spu=1,Spm=3 109 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,Spu=1,Spm=2 113 0 (DISABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1,Spu=1,Spm=1 247 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1 248 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1322812_R51MM01 249 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1321121_R51GD01 250 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1321314_R51TK02 251 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1320742_R51SZ01 252 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1321447_R51TK05 253 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,GeneralProcessorUnit=1 255 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1329854_R10CC04 256 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1329855_R10CC03 257 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1321316_R51SZ01 258 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1327705_R51SZ01 259 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1329850_R10CC03 260 0 (DISABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1320787_R51TK02 521 0 (LOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2 522 0 (DISABLED) Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2,Vc4Ttp=1 523 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1 524 0 (DISABLED) Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1,Vc4Ttp=1 546 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 556 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 1808 0 (DISABLED) TransportNetwork=1,AtmPort=MS-7-2-1 1968 0 (DISABLED) TransportNetwork=1,AtmPort=MS-7-1-1 2685 0 (DISABLED) TransportNetwork=1,AtmPort=MS-26-1-1 3513 1 (UNLOCKED) 0 (DISABLED) RncFunction=1,RncModule=8,PacketDataRouter=Pdr4Gtpu2 3514 1 (UNLOCKED) 0 (DISABLED) RncFunction=1,RncModule=8,PacketDataRouter=Pdr4Gtpu1===================================================================================Total: 41 MOs

Added 41 MOs to group: st_group

OFFLINE_RNC11_DCG_K> bl utrancell=iub-10-1

090325-11:47:03 OFFLINE_RNC11_modump.zip 7.1n RNC_NODE_MODEL_G_5_30 stopfile=/tmp/23079

============================================================================================================ Id MO administrativeState Result============================================================================================================


6756 UtranCell=Iub-10-1 0 >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

OFFLINE_RNC11_DCG_K> cr rncfunction=1,iublink=Iub-42

090325-11:47:21 OFFLINE_RNC11_modump.zip 7.1n RNC_NODE_MODEL_G_5_30 stopfile=/tmp/23079

Attribute 1 of 2, rbsId (long): 42

Attribute 2 of 2, preferredSubrackRef (moRef:Subrack): Enter mo LDN: subrack=ms

>>> [Proxy ID = 8244] MO name :ManagedElement=1,RncFunction=1,IubLink=Iub-42


090325-11:47:31 OFFLINE_RNC11_modump.zip 7.1n RNC_NODE_MODEL_G_5_30 stopfile=/tmp/23079=================================================================================================================8244 RncFunction=1,IubLink=Iub-42=================================================================================================================IubLinkId Iub-42availabilityStatus 0 (NO_STATUS)beMarginDlHw 0beMarginUlHw 0dlHwAdm 100operationalState 1 (ENABLED)preferredSubrackRef Subrack=MSrbsId 42reservedBy [0] =rncModuleRef ulHwAdm 100userLabel =================================================================================================================Total: 1 MOs


4 PM COMMANDS

4.1 PM Interface

The CPP PM service supports counter-based measurements (all nodes) and event-based measurements (RNC/RBS only)

The following access methods are supported:

- instantaneous counter values for CPP, RBS and MGW MOs can be read via the CM Service “GetAttribute” operation (moshell command “pget”).It is not possible to read instantaneous counters for RNC MOs via the CM Service. - counter values for a given ROP (Result Output Period) can be read from the XML ROP files, provided there is an active statistics scanner containing these values. - events that occurred in a given ROP can be read from the binary ROP files, provided there is an active event scanner containing these events.

A ROP can be defined to be 5 minutes, 15 minutes, or 60 minutes.

NODE

MoShell/ AMOS

Statistics Scanner

Events Scanner

XML ROP file

Binary ROP file

CORBA-PM (pst,pgets,pcr,etc.)

FTP/SFTP (pmr,pmx,pme)

CORBA-CM (pget, pdiff)

MIB


Available PM commands in moshell

Operation Related moshell command(s) ProtocolList Scanners and Event Filters pst

corba (PM)

Create Statistics Scanner pcrStop Scanner pblResume Scanner pdebDelete Scanner pdelSet Event Filter psetView Scanner contents pgetsRead instantaneous counter value pget/pdiff corba (CM)Fetch and parse Statistics ROP files (xml) pmr/pmx ftp/sftpFetch and parse Event ROP files (binary) pme

PM related commands can be printed from the “p” menu.

OFFLINE> p

****************************************************************************************************Command Name Purpose (type "h <command>" for detailed help on a command)****************************************************************************************************pmom[ac]/lmom[c] Print description of PM counters (pmom) or log attributes (lmom, CDMA only).pget/lpget Read PM attribute(s) from MO(s).hpget[c]/lhpget[c] Read PM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).pdiff/lpdiff Print incrementation of PM attributes.pmx[hfdn] Display counter values, extracted from the statistics ROP files.pmr[ag] Produce PM KPI reports, based on counter values in statistics ROP files and formulas in CPI documentation.pme[fd][cgu] Fetch/decode event ROP files (RNC/RBS only).pst List all PM scanners and their state.pgets[n] Print scanner contents.pcr[cfd]/lpcr[cfd] Create a statistics scanner.pbl Suspend a scanner.pdeb Resume a scanner.pdel Delete a scanner.emom Display list of events available for each kind of event-based scanner.pset[d] Set the contents of an event-based scanner (RNC/RBS only).


4.2 Counter-based measurements

4.2.1 View the pm counters description - pmom command

RNC11> h pmom

*******************************************************pmom[acd]/lmom[c] [<moclass>] [<counter>] [<data-type>] [<flags>] [<description>] *******************************************************Print description of PM counters (pmom) or log attributes (lmom, CDMA only).

Options: - "a" : shows what regular attributes can be included in scanners. - "c" : show all the MO classes specified in the filter as well as their children/grandchildren/etc classes. - "d" : gives a shorter printout, without the description part.

The "type" field refers to the data type of the counter value, e.g. an integer (long), or a sequence of integers.The "flags" field refers to the properties of the counter, eg: * deprecated: means that the counter is obsolete and will never be stepped. * notInMOM: means that the counter is implemented in RNC SW but not specified in the MOM. Should only happen on pre-GA SW. * notImplemented: means that the counter is specified in the MOM but not implemented in RNC SW. Should only happen on pre-GA SW. * ropReset: indicates that the counter value is reset to 0 before each ROP period. * noReset: indicates that the counter value is not reset to 0 at the ROP period and will only be reset at node restart or when the value reaches 2^31 * PEG,GAUGE,PDF,etc: this is the counter type, whose description can be found in CPI. * a number in square brackets: shown on PDF counters to indicate the number of elements in the array.

....

...

RNC11> pmom atmport

##################################################################################MO Class Pm Counters##################################################################################AtmPort 3 pmReceivedAtmCells pmSecondsWithUnexp pmTransmittedAtmCells----------------------------------------------------------------------------------

RNC11> pmom atmport rec


##################################################################################################################################MO Class Pm Counter Type Flags##################################################################################################################################AtmPort pmReceivedAtmCells long PEG,noReset----------------------------------------------------------------------------------------------------------------------------------Description: Number of received ATM cells through the ATM port.Condition: An ATM cell is received.Counter is reset after measurement period: NoCounter type: PEGUnit: Number of ATM cells**********************************************************************************************************************************

RNC11> pmom atmport .

##################################################################################################################################MO Class Pm Counter Type Flags##################################################################################################################################AtmPort pmReceivedAtmCells long PEG,noReset----------------------------------------------------------------------------------------------------------------------------------Description: Number of received ATM cells through the ATM port.Condition: An ATM cell is received.Counter is reset after measurement period: NoCounter type: PEGUnit: Number of ATM cells**********************************************************************************************************************************AtmPort pmSecondsWithUnexp long PEG,noReset----------------------------------------------------------------------------------------------------------------------------------Description: Number of errored seconds with discarded cells due to protocol errors, unexpected events (UNEX). I.610:Protocol errors means reception of cells with either a non-standardized or a non-currently allocated header value.Condition: Unexpected ATM cells received.Counter is reset after measurement period: NoCounter type: PEGUnit: Seconds**********************************************************************************************************************************AtmPort pmTransmittedAtmCells long PEG,noReset----------------------------------------------------------------------------------------------------------------------------------Description: Number of transmitted ATM cells through the ATM port.Condition: An ATM cell is sent.Counter type: PEGCounter is reset after measurement period: NoUnit: Number of ATM cells**********************************************************************************************************************************


View the counter list, without description:

RNC11> pmomd atmport .

##################################################################################################################################MO Class Pm Counter Type Flags##################################################################################################################################AtmPort pmReceivedAtmCells long PEG,noResetAtmPort pmSecondsWithUnexp long PEG,noResetAtmPort pmTransmittedAtmCells long PEG,noReset

RNC11> pmomd . receivedatmcel

##################################################################################################################################MO Class Pm Counter Type Flags##################################################################################################################################AtmPort pmReceivedAtmCells long PEG,noResetVclTp pmReceivedAtmCells long PEG,ropResetVplTp pmReceivedAtmCells long PEG,ropReset

RNC11> pmomd . reject

##################################################################################################################################MO Class Pm Counter Type Flags##################################################################################################################################GsmRelation pmNoFailOutIratHoCs57UeRejection long PEG,ropResetGsmRelation pmNoFailOutIratHoMultiUeRejection long PEG,ropResetGsmRelation pmNoFailOutIratHoSpeechUeRejection long PEG,ropResetGsmRelation pmNoFailOutIratHoStandaloneUeRejection long PEG,ropResetGsmRelation pmNoFailOutSbHoSpeechUeRejection long PEG,ropResetIuBcLink pmNoRejectedTcpConnections long PEG,ropResetSccpPolicing pmNoOfRejectMsg long PEG,noResetUtranCell pmNoPagingAttemptUtranRejected long PEG,ropResetUtranCell pmNoRejectedTcpConnections long deprecated

Search for counters containing specific text in the description part:

RNC11> h pmom


*******************************************************pmom[acd]/lmom[c] [<moclass>] [<counter>] [<data-type>] [<flags>] [<description>] *******************************************************Print description of PM counters (pmom) or log attributes (lmom, CDMA only)....

RNC11> pmomd . . . . reject

##################################################################################################################################MO Class Pm Counter Type Flags##################################################################################################################################Aal2Ap pmUnSuccInConnsRemoteQosClassA long PEG,ropResetAal2Ap pmUnSuccInConnsRemoteQosClassB long PEG,ropResetAal2Ap pmUnSuccInConnsRemoteQosClassC long PEG,ropResetAal2Ap pmUnSuccInConnsRemoteQosClassD long PEG,ropResetAal2Ap pmUnSuccOutConnsLocalQosClassA long PEG,ropResetAal2Ap pmUnSuccOutConnsLocalQosClassB long PEG,ropResetAal2Ap pmUnSuccOutConnsLocalQosClassC long PEG,ropResetAal2Ap pmUnSuccOutConnsLocalQosClassD long PEG,ropResetAal2Ap pmUnSuccOutConnsRemoteQosClassA long PEG,ropResetAal2Ap pmUnSuccOutConnsRemoteQosClassB long PEG,ropResetAal2Ap pmUnSuccOutConnsRemoteQosClassC long PEG,ropResetAal2Ap pmUnSuccOutConnsRemoteQosClassD long PEG,ropResetAal2Sp pmUnsuccessfulConnsInternal long PEG,noResetGsmRelation pmNoFailOutIratHoCs57UeRejection long PEG,ropResetGsmRelation pmNoFailOutIratHoMultiUeRejection long PEG,ropResetGsmRelation pmNoFailOutIratHoSpeechUeRejection long PEG,ropResetGsmRelation pmNoFailOutIratHoStandaloneUeRejection long PEG,ropResetGsmRelation pmNoFailOutSbHoSpeechUeRejection long PEG,ropResetIuBcLink pmNoRejectedTcpConnections long PEG,ropResetIubLink pmNoOfDiscardedNbapcMessages long PEG,ropResetLoadControl pmRefusedRequestsB0 long PEG,ropResetLoadControl pmRefusedRequestsB1 long PEG,ropResetLoadControl pmRefusedRequestsF0 long PEG,ropResetLoadControl pmRefusedRequestsF1 long PEG,ropResetLoadControl pmRefusedRequestsF2 long PEG,ropResetLoadControl pmRefusedRequestsF3 long PEG,ropResetLoadControl pmRefusedRequestsF4 long PEG,ropResetRncFunction pmNoOfRedirectedEmergencyCalls long PEG,ropResetSccpPolicing pmNoOfRejectMsg long PEG,noResetUtranCell pmNoFailedRabEstAttemptExceedConnLimit long PEG,ropResetUtranCell pmNoFailedRabEstAttemptLackDlAse long PEG,ropResetUtranCell pmNoFailedRabEstAttemptLackDlChnlCode long PEG,ropReset


UtranCell pmNoFailedRabEstAttemptLackDlPwr long PEG,ropResetUtranCell pmNoFailedRabEstAttemptLackUlAse long PEG,ropResetUtranCell pmNoInCsIratHoAdmFail long PEG,ropResetUtranCell pmNoLoadSharingRrcConn long PEG,ropResetUtranCell pmNoLoadSharingRrcConnCs long PEG,ropResetUtranCell pmNoLoadSharingRrcConnPs long PEG,ropResetUtranCell pmNoNonServingCellReqDeniedEul long PEG,ropResetUtranCell pmNoOfNonHoReqDeniedCs long PEG,ropResetUtranCell pmNoOfNonHoReqDeniedEul long PEG,ropResetUtranCell pmNoOfNonHoReqDeniedHs long PEG,ropResetUtranCell pmNoOfNonHoReqDeniedInteractive long PEG,ropResetUtranCell pmNoOfNonHoReqDeniedPsStr128 long PEG,ropResetUtranCell pmNoOfNonHoReqDeniedPsStreaming long PEG,ropResetUtranCell pmNoOfNonHoReqDeniedSpeech long PEG,ropResetUtranCell pmNoOfSwDownNgAdm long PEG,ropResetUtranCell pmNoOfSwDownNgHo long PEG,ropResetUtranCell pmNoPagingAttemptUtranRejected long PEG,ropResetUtranCell pmNoRejRrcConnMpLoadC long PEG,ropResetUtranCell pmNoReqDeniedAdm long PEG,ropResetUtranCell pmNoServingCellReqDeniedEul long PEG,ropResetUtranCell pmNoServingCellReqDeniedEulTti2 long PEG,ropResetUtranCell pmTotNoRrcConnectFailCongIratCcOrder long PEG,ropResetUtranCell pmTotNoRrcConnectFailCongIratCellResel long PEG,ropResetUtranCell pmTotNoUtranRejRrcConnReq long PEG,ropReset

Search for counters containing specific text in the flag:

RNC11> h pmom

*******************************************************pmom[acd]/lmom[c] [<moclass>] [<counter>] [<data-type>] [<flags>] [<descr ipt ion>] *******************************************************Print description of PM counters (pmom) or log attributes (lmom, CDMA only)....

RNC11> pmomd . . . gaug

##################################################################################################################################MO Class Pm Counter Type Flags##################################################################################################################################Aal2Ap pmExisOrigConns long GAUGE,ropResetAal2Ap pmExisTermConns long GAUGE,ropResetAal2Ap pmExisTransConns long GAUGE,ropReset


IurLink pmNoOfRlForDriftingUesPerDrnc long Gauge,ropResetMtp2TpAnsi pmNoOfSendBufferOctets long GAUGE,noResetMtp2TpChina pmNoOfSendBufferOctets long GAUGE,noResetMtp2TpItu pmNoOfSendBufferOctets long GAUGE,noResetMtp2TpTtc pmNoOfSendBufferOctets long GAUGE,noResetMtp3bSrs pmNoOfSecsAccRouteSetUnavailable long GAUGE,noResetNniSaalTp pmLinkInServiceTime long GAUGE,noResetNodeSynch pmIubLinkDynamicDelayMax long Gauge,ropResetNodeSynch pmIubLinkStaticDelay long Gauge,ropResetPlugInUnit pmProcessorLoad long GAUGE,noResetSccpSp pmNoOfConInUseExceedHighWaterMark long GAUGE,noResetSccpSp pmNoOfConInUseReceededLowWaterMark long GAUGE,noResetSctp pmSctpCurrEstab long GAUGE,noResetSynchronization pmHDelayVarBest10Pct long GAUGE,ropResetSynchronization pmHDelayVarBest1Pct long GAUGE,ropResetSynchronization pmHDelayVarBest50Pct long GAUGE,ropResetSynchronization pmMaxDelayVariation long GAUGE,ropResetUniSaalTp pmLinkInServiceTime long GAUGE,noResetUtranCell pmNoOfRlForDriftingUes long GAUGE,ropResetUtranCell pmNoOfRlForNonDriftingUes long GAUGE,ropReset

Search for counters containing specific text in the data-type:

RNC11> h pmom

*******************************************************pmom[acd]/lmom[c] [<moclass>] [<counter>] [<data-type> ] [<flags>] [<descr ipt ion>] *******************************************************Print description of PM counters (pmom) or log attributes (lmom, CDMA only)....

RNC11> pmomd . . sequence:long

##################################################################################################################################MO Class Pm Counter Type Flags##################################################################################################################################Eul pmEulRlcUserPacketThp sequence:long [19] PDF,ropResetHsdsch pmHsDlRlcUserPacketThp sequence:long [30] PDF,ropResetIubEdch pmEdchDataFrameDelayIub sequence:long [16] PDF,ropResetIubLink pmDlCredits sequence:long [10] PDF,ropResetIubLink pmUlCredits sequence:long [10] PDF,ropResetIurLink pmEdchDataFrameDelayIub sequence:long [16] PDF,ropReset


LoadControl pmMeasuredLoad sequence:long [8] PDF,ropResetRncFunction pmIuSccpConRate sequence:long [40] PDF,ropResetRncFunction pmSamplesDchDchDlRcvDelay sequence:long [3] PDF,ropResetRncFunction pmSamplesDchDchLatency sequence:long [3] PDF,ropResetRncFunction pmSamplesDchDlDelay sequence:long [3] PDF,ropResetRncFunction pmSamplesHsDchDlRcvDelay sequence:long [3] PDF,ropResetRncFunction pmSamplesHsDchLatency sequence:long [3] PDF,ropResetRncFunction pmSamplesHsDlDelay sequence:long [3] PDF,ropResetRncFunction pmSamplesHsEulDlRcvDelay sequence:long [3] PDF,ropResetRncFunction pmSamplesHsEulLatency sequence:long [3] PDF,ropResetRncFunction pmSumDchDchDlRcvDelay sequence:long [3] PDF,ropResetRncFunction pmSumDchDchLatency sequence:long [3] PDF,ropResetRncFunction pmSumDchDlDelay sequence:long [3] PDF,ropResetRncFunction pmSumHsDchDlRcvDelay sequence:long [3] PDF,ropResetRncFunction pmSumHsDchLatency sequence:long [3] PDF,ropResetRncFunction pmSumHsDlDelay sequence:long [3] PDF,ropResetRncFunction pmSumHsEulDlRcvDelay sequence:long [3] PDF,ropResetRncFunction pmSumHsEulLatency sequence:long [3] PDF,ropResetUtranCell pmDchDlRlcUserPacketThp sequence:long [20] PDF,ropResetUtranCell pmDchUlRlcUserPacketThp sequence:long [20] PDF,ropResetUtranCell pmEulHarqTransmTti10PsInteractive sequence:long [4] PDF,ropResetUtranCell pmEulHarqTransmTti10Srb sequence:long [4] PDF,ropResetUtranCell pmEulHarqTransmTti2PsRabs sequence:long [4] PDF,ropResetUtranCell pmEulHarqTransmTti2Srb sequence:long [4] PDF,ropResetUtranCell pmRes1 sequence:long [19] PDF,ropResetUtranCell pmRes2 sequence:long [19] PDF,ropResetUtranCell pmRes3 sequence:long [19] PDF,ropResetUtranCell pmRes4 sequence:long [19] PDF,ropResetUtranCell pmRes5 sequence:long [19] PDF,ropResetUtranCell pmRes6 sequence:long [19] PDF,ropResetUtranCell pmSamplesPacketDlDelay sequence:long [3] PDF,ropResetUtranCell pmSamplesPacketLatency sequence:long [3] PDF,ropResetUtranCell pmSamplesPacketLatencyPsStreamHs sequence:long [3] PDF,ropResetUtranCell pmSumPacketDlDelay sequence:long [3] PDF,ropResetUtranCell pmSumPacketLatency sequence:long [3] PDF,ropResetUtranCell pmSumPacketLatencyPsStreamHs sequence:long [3] PDF,ropResetVclTp pmBwUtilizationRx sequence:long [21] PDF,ropResetVclTp pmBwUtilizationTx sequence:long [21] PDF,ropReset

4.2.2 Reading counter values from ROP files - pmx command

Storage location of the ROP files


The number of ROP files stored in this location is specified in the attribute maxNoOfPmFiles, by default 100 ==> 25 hours.

RNC11> get pmservi

=================================================================================================================3 SystemFunctions=1,PmService=1=================================================================================================================maxNoOfCounters 2300000maxNoOfMonitors 30maxNoOfPmFiles 100minorAlarmCeasingDelta 5performanceDataPath /p001200/pm_dataperformanceDataVolume /p001200/transactionTimeOut 60userLabel warningAlarmCeasingDelta 5warningAlarmLimitPercent 80=================================================================================================================Total: 1 MOs

RNC11> ftree /p001200/pm_data

/p001200/pm_data/-rw-rw-rw- 14156 21 May 2006 17:19:00 /p001200/pm_data/A20060521.1700-1715:1.xml.gz-rw-rw-rw- 14156 21 May 2006 17:34:00 /p001200/pm_data/A20060521.1715-1730:1.xml.gz-rw-rw-rw- 14156 21 May 2006 17:49:00 /p001200/pm_data/A20060521.1730-1745:1.xml.gz....

Important: only counters that are defined in an active scanner are saved in a ROP file.

RNC11> h pmx

*********************************************************************************pmx[hfdn] [<mofilter>|<mogroup>] [<counter-filter>] [-l <PMfiles-directory>] [-m <minushours>] [-p <plushours>] [-s <startdate>[.<starttime>]] [-e <enddate>[.<endtime>]] [-a|-d|-h] [| <unix-command>]*********************************************************************************To display counter values, extracted from the XML files. This command is calling the pmExtract/pmXtab/pmDiff utilities.....


RNC11> pmx utrancell downtime|pmTotNoRrcConnectReq(Success)*$

gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0915-0930.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell=[^,]+$" "downtime|pmtotnorrcconnectreq(success)*$" | /home/eanzmagn/moshell/pmXtab -cols time -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"

Report from 2006-07-09 09:15 UTC to 2006-07-09 09:29 UTC

Date: 2006-07-09Object Counter 09:15UtranCell=30101 pmCellDowntimeAuto 0UtranCell=30101 pmCellDowntimeMan 0UtranCell=30101 pmTotNoRrcConnectReq 44UtranCell=30101 pmTotNoRrcConnectReqSuccess 44UtranCell=30102 pmCellDowntimeAuto 0UtranCell=30102 pmCellDowntimeMan 0UtranCell=30102 pmTotNoRrcConnectReq 63UtranCell=30102 pmTotNoRrcConnectReqSuccess 63UtranCell=30103 pmCellDowntimeAuto 0UtranCell=30103 pmCellDowntimeMan 0UtranCell=30103 pmTotNoRrcConnectReq 57UtranCell=30103 pmTotNoRrcConnectReqSuccess 57UtranCell=30104 pmCellDowntimeAuto 0UtranCell=30104 pmCellDowntimeMan 0UtranCell=30104 pmTotNoRrcConnectReq 27UtranCell=30104 pmTotNoRrcConnectReqSuccess 14UtranCell=30105 pmCellDowntimeAuto 0UtranCell=30105 pmCellDowntimeMan 0etc.....

Show counter values horizontally, one line per MO

RNC11> pmxh utrancell=[^,]+$ downtime|pmTotNoRrcConnectReq(Success)*$

gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0915-0930.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell=[^,]+$" "downtime|pmtotnorrcconnectreq(success)*$" | /home/eanzmagn/moshell/pmXtab -a -cols ctr -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"


Start Time: 2006-07-09 09:15:00 End Time: 2006-07-09 09:15:00 Object pmCellDowntimeAuto pmCellDowntimeMan pmTotNoRrcConnectReq pmTotNoRrcConnectReqSuccess


UtranCell=30101 0 0 44 44 UtranCell=30102 0 0 63 63 UtranCell=30103 0 0 57 57 UtranCell=30104 0 0 27 14 UtranCell=30105 0 0 32 14 UtranCell=30106 0 0 30 11 UtranCell=30107 0 0 60 60 UtranCell=30108 0 0 64 64 UtranCell=30109 0 0 69 69 UtranCell=30110 0 0 56 56 UtranCell=301100 0 0 77 77 UtranCell=301101 0 0 85 85 UtranCell=301102 0 0 80 80 UtranCell=301103 0 0 81 81 UtranCell=301104 0 0 87 87 UtranCell=301105 0 0 85 85 UtranCell=301106 0 0 55 55 UtranCell=301107 0 0 64 64etc....

Specify the time period (default: the last 15 minutes)

1) Example: view the past 2½ hours:

rnc11> pmx utrancel l pmTotNoRrcConnectReq(Success)*$ - m 2.5

gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0645-0700.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0700-0715.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0715-0730.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0730-0745.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0745-0800.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0800-0815.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0815-0830.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0830-0845.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0845-0900.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20081031.0900-0915.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell" "pmTotNoRrcConnectReq(Success)*$" | grep -v ";,*$" | /home/eanzmagn/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"


Date: 2008-10-31Object Counter 06:45 07:00 07:15 07:30 07:45 08:00 08:15 08:30 08:45 09:00


UtranCell=30101 pmTotNoRrcConnectReq 61 64 63 57 62 50 67 63 58 60 UtranCell=30101 pmTotNoRrcConnectReqSuccess 61 64 63 57 62 50 67 63 58 60 UtranCell=30102 pmTotNoRrcConnectReq 61 61 61 63 67 59 56 49 66 63 UtranCell=30102 pmTotNoRrcConnectReqSuccess 61 61 61 63 67 59 56 49 66 63 UtranCell=30103 pmTotNoRrcConnectReq 63 67 63 56 66 65 62 64 61 66

2) Example: specify absolute time period, start date, end date

RNC11> pmx utrancel l pmTotNoRrcConnectReq(Success)*$ - s 20070225.1500 - e 20070225.1730

gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1500-1515.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1515-1530.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1530-1545.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1545-1600.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1600-1615.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1615-1630.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1630-1645.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1645-1700.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1700-1715.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell" "pmtotnorrcconnectreq(success)*$" | grep -v ";$" | /home/eanzmagn/moshell/pmXtab -cols time -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"


Date: 2007-02-25Object Counter 15:00 15:15 15:30 15:45 16:00 16:15 16:30 16:45 17:00 17:15 17:30UtranCell=30101 pmTotNoRrcConnectReq 61 64 63 57 62 50 67 63 58 60 60UtranCell=30101 pmTotNoRrcConnectReqSuccess 61 64 63 57 62 50 67 63 58 60 60UtranCell=30102 pmTotNoRrcConnectReq 61 61 61 63 67 59 56 49 66 63 68UtranCell=30102 pmTotNoRrcConnectReqSuccess 61 61 61 63 67 59 56 49 66 63 68UtranCell=30103 pmTotNoRrcConnectReq 63 67 63 56 66 65 62 64 61 66 64UtranCell=30103 pmTotNoRrcConnectReqSuccess 63 67 63 56 66 65 62 64 61 66 64UtranCell=30104 pmTotNoRrcConnectReq 24 26 26 24 20 36 21 22 15 30 18UtranCell=30104 pmTotNoRrcConnectReqSuccess 10 11 14 13 9 14 13 7 9 19 12UtranCell=30105 pmTotNoRrcConnectReq 27 20 18 23 29 34 31 26 24 23 24UtranCell=30105 pmTotNoRrcConnectReqSuccess 14 10 7 10 12 16 12 10 9 13 11UtranCell=30106 pmTotNoRrcConnectReq 23 27 26 27 20 24 25 18 26 20 24UtranCell=30106 pmTotNoRrcConnectReqSuccess 10 10 14 13 9 8 11 8 15 12 11UtranCell=30107 pmTotNoRrcConnectReq 22 23 16 30 22 18 23 25 23 19 22UtranCell=30107 pmTotNoRrcConnectReqSuccess 10 11 7 19 7 11 13 15 9 10 10UtranCell=30108 pmTotNoRrcConnectReq 26 28 27 27 34 21 36 16 23 23 31UtranCell=30108 pmTotNoRrcConnectReqSuccess 15 11 12 19 20 8 14 7 14 15 18UtranCell=30109 pmTotNoRrcConnectReq 11 27 24 24 20 21 23 29 21 21 15UtranCell=30109 pmTotNoRrcConnectReqSuccess 7 14 5 13 10 8 6 15 9 13 7UtranCell=30110 pmTotNoRrcConnectReq 20 21 23 22 15 23 30 20 22 26 23


UtranCell=30110 pmTotNoRrcConnectReqSuccess 9 12 11 13 5 11 18 8 10 17 8UtranCell=301100 pmTotNoRrcConnectReq 101 103 92 96 99 100 81 95 96 88 92...<cut>...

3) Example: specify relative time period

The current time is 18:23

RNC11> readclock

$ readclockDate: 2007-02-25 UTC Time: 18:23:11. Sunday$

To view the data from 15:00 to 17:30 we need to go back 3.5 hours and forward 2.5 hours

18:23 17:30 15:00

-m 3.5

-p 2.5

RNC11> pmx utrancel l pmTotNoRrcConnectReq(Success)*$ - m 3.5 - p 2.5

gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1500-1515.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1515-1530.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1530-1545.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1545-1600.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1600-1615.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1615-1630.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1630-1645.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1645-1700.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1700-1715.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1715-1730.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1730-1745.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell" "pmtotnorrcconnectreq(success)*$" | grep -v ";$" | /home/eanzmagn/moshell/pmXtab -cols time -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"


Date: 2007-02-25


Object Counter 15:00 15:15 15:30 15:45 16:00 16:15 16:30 16:45 17:00 17:15 17:30UtranCell=30101 pmTotNoRrcConnectReq 61 64 63 57 62 50 67 63 58 60 60UtranCell=30101 pmTotNoRrcConnectReqSuccess 61 64 63 57 62 50 67 63 58 60 60UtranCell=30102 pmTotNoRrcConnectReq 61 61 61 63 67 59 56 49 66 63 68UtranCell=30102 pmTotNoRrcConnectReqSuccess 61 61 61 63 67 59 56 49 66 63 68UtranCell=30103 pmTotNoRrcConnectReq 63 67 63 56 66 65 62 64 61 66 64UtranCell=30103 pmTotNoRrcConnectReqSuccess 63 67 63 56 66 65 62 64 61 66 64UtranCell=30104 pmTotNoRrcConnectReq 24 26 26 24 20 36 21 22 15 30 18UtranCell=30104 pmTotNoRrcConnectReqSuccess 10 11 14 13 9 14 13 7 9 19 12UtranCell=30105 pmTotNoRrcConnectReq 27 20 18 23 29 34 31 26 24 23 24UtranCell=30105 pmTotNoRrcConnectReqSuccess 14 10 7 10 12 16 12 10 9 13 11UtranCell=30106 pmTotNoRrcConnectReq 23 27 26 27 20 24 25 18 26 20 24UtranCell=30106 pmTotNoRrcConnectReqSuccess 10 10 14 13 9 8 11 8 15 12 11UtranCell=30107 pmTotNoRrcConnectReq 22 23 16 30 22 18 23 25 23 19 22UtranCell=30107 pmTotNoRrcConnectReqSuccess 10 11 7 19 7 11 13 15 9 10 10UtranCell=30108 pmTotNoRrcConnectReq 26 28 27 27 34 21 36 16 23 23 31UtranCell=30108 pmTotNoRrcConnectReqSuccess 15 11 12 19 20 8 14 7 14 15 18UtranCell=30109 pmTotNoRrcConnectReq 11 27 24 24 20 21 23 29 21 21 15UtranCell=30109 pmTotNoRrcConnectReqSuccess 7 14 5 13 10 8 6 15 9 13 7UtranCell=30110 pmTotNoRrcConnectReq 20 21 23 22 15 23 30 20 22 26 23UtranCell=30110 pmTotNoRrcConnectReqSuccess 9 12 11 13 5 11 18 8 10 17 8UtranCell=301100 pmTotNoRrcConnectReq 101 103 92 96 99 100 81 95 96 88 92...<cut>...

Hourly aggregation

RNC11> pmx utrancell pmTotNoRrcConnectReq(Success)*$ -m 3.5 -p 2.5 -h

gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1500-1515.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1515-1530.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1530-1545.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1545-1600.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1600-1615.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1615-1630.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1630-1645.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1645-1700.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1700-1715.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1715-1730.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1730-1745.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell" "pmtotnorrcconnectreq(success)*$" | grep -v ";$" | /home/eanzmagn/moshell/pmXtab -h -cols time -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"


Date: 2007-02-25


Object Counter 15:00 16:00 17:00UtranCell=30101 pmTotNoRrcConnectReq 245 242 178UtranCell=30101 pmTotNoRrcConnectReqSuccess 245 242 178UtranCell=30102 pmTotNoRrcConnectReq 246 231 197UtranCell=30102 pmTotNoRrcConnectReqSuccess 246 231 197UtranCell=30103 pmTotNoRrcConnectReq 249 257 191UtranCell=30103 pmTotNoRrcConnectReqSuccess 249 257 191UtranCell=30104 pmTotNoRrcConnectReq 100 99 63UtranCell=30104 pmTotNoRrcConnectReqSuccess 48 43 40UtranCell=30105 pmTotNoRrcConnectReq 88 120 71UtranCell=30105 pmTotNoRrcConnectReqSuccess 41 50 33UtranCell=30106 pmTotNoRrcConnectReq 103 87 70UtranCell=30106 pmTotNoRrcConnectReqSuccess 47 36 38UtranCell=30107 pmTotNoRrcConnectReq 91 88 64UtranCell=30107 pmTotNoRrcConnectReqSuccess 47 46 29UtranCell=30108 pmTotNoRrcConnectReq 108 107 77UtranCell=30108 pmTotNoRrcConnectReqSuccess 57 49 47UtranCell=30109 pmTotNoRrcConnectReq 86 93 57UtranCell=30109 pmTotNoRrcConnectReqSuccess 39 39 29UtranCell=30110 pmTotNoRrcConnectReq 86 88 71UtranCell=30110 pmTotNoRrcConnectReqSuccess 45 42 35UtranCell=301100 pmTotNoRrcConnectReq 392 375 276...<cut>...

Aggregate on whole period

RNC11> pmx utrancell pmTotNoRrcConnectReq(Success)*$ -m 3.5 -p 2.5 -a

gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1500-1515.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1515-1530.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1530-1545.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1545-1600.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1600-1615.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1615-1630.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1630-1645.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1645-1700.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1700-1715.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1715-1730.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20070225.1730-1745.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell" "pmtotnorrcconnectreq(success)*$" | grep -v ";$" | /home/eanzmagn/moshell/pmXtab -a -cols time -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"


Start Time: 2007-02-25 15:00:00 End Time: 2007-02-25 17:30:00


Object Counter UtranCell=30101 pmTotNoRrcConnectReq 665UtranCell=30101 pmTotNoRrcConnectReqSuccess 665UtranCell=30102 pmTotNoRrcConnectReq 674UtranCell=30102 pmTotNoRrcConnectReqSuccess 674UtranCell=30103 pmTotNoRrcConnectReq 697UtranCell=30103 pmTotNoRrcConnectReqSuccess 697UtranCell=30104 pmTotNoRrcConnectReq 262UtranCell=30104 pmTotNoRrcConnectReqSuccess 131UtranCell=30105 pmTotNoRrcConnectReq 279UtranCell=30105 pmTotNoRrcConnectReqSuccess 124UtranCell=30106 pmTotNoRrcConnectReq 260UtranCell=30106 pmTotNoRrcConnectReqSuccess 121UtranCell=30107 pmTotNoRrcConnectReq 243UtranCell=30107 pmTotNoRrcConnectReqSuccess 122UtranCell=30108 pmTotNoRrcConnectReq 292UtranCell=30108 pmTotNoRrcConnectReqSuccess 153UtranCell=30109 pmTotNoRrcConnectReq 236UtranCell=30109 pmTotNoRrcConnectReqSuccess 107UtranCell=30110 pmTotNoRrcConnectReq 245UtranCell=30110 pmTotNoRrcConnectReqSuccess 122UtranCell=301100 pmTotNoRrcConnectReq 1043UtranCell=301100 pmTotNoRrcConnectReqSuccess 1043UtranCell=301101 pmTotNoRrcConnectReq 991UtranCell=301101 pmTotNoRrcConnectReqSuccess 991UtranCell=301102 pmTotNoRrcConnectReq 1099UtranCell=301102 pmTotNoRrcConnectReqSuccess 1099UtranCell=301103 pmTotNoRrcConnectReq 836UtranCell=301103 pmTotNoRrcConnectReqSuccess 836UtranCell=301104 pmTotNoRrcConnectReq 824UtranCell=301104 pmTotNoRrcConnectReqSuccess 824UtranCell=301105 pmTotNoRrcConnectReq 810UtranCell=301105 pmTotNoRrcConnectReqSuccess 810UtranCell=301106 pmTotNoRrcConnectReq 722UtranCell=301106 pmTotNoRrcConnectReqSuccess 721UtranCell=301107 pmTotNoRrcConnectReq 666...<cut>...

Piping the output, e.g. sort on a specific column

RNC11> pmxh utrancell=[^,]+$ downtime|pmTotNoRrcConnectReq(Success)*$ -m 5 -p 2 -l /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/ | sort -rnk 4


gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0430-0445.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0445-0500.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0500-0515.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0515-0530.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0530-0545.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0545-0600.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0600-0615.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/pm/A20060709.0615-0630.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell=[^,]+$" "downtime|pmtotnorrcconnectreq(success)*$" | /home/eanzmagn/moshell/pmXtab -a -cols ctr -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)" | sort -nrk 4

Report from 2006-07-09 04:30 UTC to 2006-07-09 06:29 UTCObject pmCellDowntimeAuto pmCellDowntimeMan pmTotNoRrcConnectReq pmTotNoRrcConnectReqSuccessUtranCell=Iub-15-2 0 0 588 585UtranCell=Iub-36-1 0 0 363 363UtranCell=Iub-16-2 0 0 353 353UtranCell=Iub-36-2 0 0 351 351UtranCell=Iub-26-1 0 0 346 346UtranCell=Iub-6-2 0 0 345 344UtranCell=Iub-26-2 0 0 319 319UtranCell=Iub-26-3 0 0 319 319UtranCell=Iub-36-3 0 0 319 319UtranCell=Iub-6-3 0 0 317 317UtranCell=Iub-16-3 0 0 297 297UtranCell=Iub-16-1 0 0 293 293...<cut>...

Producing web report

RNC11> pmxw utrancell=iub-6-1 pmTotNoRrcConnectReq$ -m 20

....

Output can be viewed on http: / / l ab72web.rnd.k i . sw.er icsson.se/~eanzmagn/pmx10


http://lab72web.rnd.ki.sw.ericsson.se/~eanzmagn/pmx10


4.2.3 Reading KPI values from ROP files - pmr command

KPI=Key Performance Indicators- the UTRAN KPI formulas are based on the CPI SYSTEM PERFORMANCE STATISTICS 85/1553-HSD 101 02/5- the MGW KPI formulas are based on the CPI M-Mgw R4.1.1.0 "User Guide for Performance Measurements, M-MGw" 17/1553-AXM 101 01/4 - the LTE KPI formulas are based on 37/1553-HSC10550/1 and 47/1553-HSC10550/1

What is the difference between a KPI and a counter?---> A KPI is calculated by performing operations on a number of counters. Example: - pmNumberOfCallAttemps and pmNumberOfCallSuccess are counters- CallSuccessRate is a KPI, calculated with the formula: CallSuccessRate = 100 * pmNumberOfCallSuccess / pmNumberOfCallAttempts

RNC11> h pmr

*******************************************************pmr[ag] [-r <report(s)>] [-l <PMfiles-directory>] [-i <iubCellModule-file>] [-f <formulafile>] [-c <configfile>] [-m <minushours>] [-p <plushours>] [-s <startdate>[.<starttime>]] [-e <enddate>[.<endtime>]] [-o <outputFormat>]*******************************************************Produce PM KPI reports, based on counter values in statistics ROP files and formulas in CPI documentation.

Printing reports from the menu prompt:

RNC11> pmr

1) RNC Node Traffic Performance 2) RNC Node Traffic Performance, Hour by Hour 3) RNC Node Traffic Performance, ROP by ROP 4) RNC Module Traffic Performance 5) RNC Subrack Traffic Performance 6) RNC MP Load 7) RNC MP Load, Hour by hour 8) RNC UtranCell RRC Performance 9) RNC UtranCell Speech Performance 10) RNC UtranCell CS Data Performance11) RNC UtranCell PS Data Performance12) RNC UtranCell Throughput and NrUsers13) RNC UtranCell HSPA Performance14) RNC UtranCell IRAT Performance15) RNC UtranCell Soft HO Performance


16) RNC UtranCell Uplink RTWP / RSSI 17) RNC Worst 20 UtranCells for RRC Failure Rate Contribution18) RNC Worst 20 Utrancells for Speech RRC Failure Rate19) RNC Worst 20 Utrancells for PS Failure Rate20) RNC Worst 20 Utrancell for Speech RAB Setup21) RNC Worst 20 Utrancell for PS RAB Setup22) RNC Worst 20 UtranCells for Speech Drop Rate Contribution23) RNC Worst 20 UtranCells for Old HS Drop Rate Contribution24) RNC Worst 20 UtranCells for Soft HO Failure Contribution25) RNC Worst 20 UtranCells for High Uplink RTWP / RSSI26) RNC IubLink RRC Performance27) RNC IubLink Speech Performance 28) RNC IubLink CS Data Performance29) RNC IubLink PS Data Performance30) RNC IubLink Soft HO Performance31) RNC IurLink Drop Rate32) RNC AtmPort RRC Performance33) RNC AtmPort Speech Performance 34) RNC AtmPort CS Data Performance35) RNC AtmPort PS Data Performance36) RNC Subrack RRC Performance37) RNC Subrack Speech Performance 38) RNC Subrack CS Data Performance39) RNC Subrack PS Data Performance40) RNC UtranCell Availability Report, Hour by Hour41) RNC UtranCell RAB failure breakdown42) RNC Q.Aal2 Setup Performance (Aal2Ap)43) RNC Q.Aal2 Setup Performance (Aal2Ap) per QoS Class44) UeRc BLER45) RNC Node Paging Performance, ROP by ROP46) RNC Utrancell Paging PerformanceEnter the report number followed by a piping command if postprocessing required.Eg "1" (no piping) or "3 | sort +2n". Type "m" to view the menu, type "x" to exit.Your Choice: 8gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090709-040311_9724/pmrbuffer9774.gz | /home/eanzmagn/moshell/pmXtab -fdef /home/eanzmagn/moshell/commonjars/pm/FORMULA_RNC_H_1_0.txt -x "^(NoRrcConnReq|NoRrcConnSuc|RrcFail|RrcFailContrib|RrcSuc)$" -i "NoRrcConnReq|NoRrcConnSuc|RrcFail|RrcFailContrib|RrcSuc" -m "(UtranCell=[^\s,=\t]+)" -r "(RncModule=[^\s,=\t]+)" -rdef /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090709-040311_9724/iubcellmodfile9774.processed -append -a -p 6.1 -fmt txt

8) RNC UtranCell RRC PerformanceReport from 2009-07-09 00:45 UTC to 2009-07-09 01:44 UTC

Start Time: 2009-07-09 00:45:00 End Time: 2009-07-09 01:30:00 Object NoRrcConnReq NoRrcConnSuc RrcFail RrcFailContrib RrcSuc UtranCell=Iub-1-1 (Mod=8) 784 784 0 0 100


UtranCell=Iub-1-2 (Mod=8) 786 787 -0.1 -50 100.1 UtranCell=Iub-1-3 (Mod=8) 797 797 0 0 100 UtranCell=Iub-1-4 (Mod=8) 747 747 0 0 100 UtranCell=Iub-1-5 (Mod=8) 895 895 0 0 100 UtranCell=Iub-1-6 (Mod=8) 816 816 0 0 100 UtranCell=Iub-10-1 (Mod=13) 1613 1613 0 0 100 UtranCell=Iub-10-2 (Mod=13) 1626 1626 0 0 100 UtranCell=Iub-10-3 (Mod=13) 1574 1574 0 0 100 UtranCell=Iub-11-1 (Mod=13) 954 955 -0.1 -50 100.1 UtranCell=Iub-11-2 (Mod=13) 809 809 0 0 100 UtranCell=Iub-11-3 (Mod=13) 804 804 0 0 100 UtranCell=Iub-12-1 (Mod=1) 348 348 0 0 100 UtranCell=Iub-12-2 (Mod=1) 420 420 0 0 100 UtranCell=Iub-12-3 (Mod=1) 386 386 0 0 100 UtranCell=Iub-13-1 (Mod=1) 551 551 0 0 100 UtranCell=Iub-13-2 (Mod=1) 322 322 0 0 100 UtranCell=Iub-13-3 (Mod=1) 307 306 0.3 50 99.7 UtranCell=Iub-14-1 (Mod=1) 457 457 0 0 100

MGW1> pmr

1) UG KPI - 4.1.1 M-MGw Accessibility - Healthy value range: 99.7 - 100% (long term average) 2) UG KPI - 4.2.1 Service Retainability - Healthy value range: 99.998-100% (long term average) 3) UG KPI - 4.3.1 ATM Transport QoS, Jitter - Healthy value range: 99.999-100% (long term average) 4) UG KPI - 4.3.2 IP Transport QoS, Incoming User Plane Traffic Success Rate - Healthy value range: 99.999-100% (long term average) 5) UG KPI - 4.3.3 IP CS CN Transport QoS, Jitter - Healthy value range: 99.999-100% (long term average) 6) UG KPI - 4.3.4 IP VoIP Transport QoS, Jitter - Healthy value range: 99.999-100% (long term average) 7) UG KPI - 4.3.5 Iu over IP Transport QoS, Jitter - Healthy value range: 99.999-100% (long term average) 8) UG KPI - 4.3.6 SS7 over ATM QoS - Healthy value range: 99.999-100% (long term average) 9) UG KPI - 4.3.7 Signalling over IP QoS - Healthy value range: 99.999-100% (long term average)10) UG KPI - 4.3.8 SS7 over TDM QoS - Healthy value range: 99.999-100% (long term average)11) UG KPI - 4.4.1 Processor Load - Healthy value range: 0 - 80% (short term average)12) UG KPI - 4.4.2 Current Traffic Load (estimated in Erlangs)13) UG KPI - 4.4.3 Software Licensing, Media Stream Channel Utilization Rate - Healthy value range: 0 - 80% (this is a snapshot value)14) UG PI - 5.1.1 Emergency Call Success Rate - Healthy value: 100% (action required when healthy value falls below 100%)15) UG PI - 5.1.2 Originating Nb Connection Initialization Success Rate - Healthy value range: 99.7 - 100% (long term average)16) UG PI - 5.1.3 Software Licensing, Media Stream Channel Seizure Success Rate - Healthy value range: 99.7 - 100% (long term average)17) UG PI - 5.1.4 Software Licensing, AMR-WB Channels Rejected Due to Exceeded Capacity License - Healthy value range: NA18) UG PI - 5.1.5 Software Licensing, G.729 Channels Rejected Due to Exceeded Capacity License - Healthy value range: NA19) UG PI - 5.1.6 Software Licensing, VoIP Gateway Channels Rejected Due to Exceeded Capacity License - Healthy value range: NA20) UG PI - 5.1.7 Software Licensing, AMR-WB Media Stream Channel Utilization Rate - Healthy value range: 0 — 80% (this is......<cut>...


248) MOC based reports - MOC Vmgw (GAUGE counters)249) MOC based reports - MOC VpcTp (PEG counters)250) MOC based reports - MOC VplTp (PEG counters)251) additional reports - Vmgw - pmNrOfOrigNbInitFaults without time aggregation252) additional reports - GigaBitEthernet - discards without time aggregation253) additional reports - Bearer establishement success rate - Healthy value range: 99.7 - 100% (long term average)254) additional reports - IP Signalling Quality - Healthy value range: 99.99 - 100% (long term average)255) additional reports - IP Transport QoS, Signaling Sucess Rate - Healthy value range: 99.99 - 100% (long term average)Enter the report number followed by a piping command if postprocessing required.Eg "1" (no piping) or "3 | sort +2n". Type "m" to view the menu, type "x" to exit.Your Choice: 1

1) UG KPI - 4.1.1 M-MGw Accessibility - Healthy value range: 99.7 - 100% (long term average)Report from 2009-12-09 13:00 UTC to 2009-12-09 13:29 UTC

Start Time: 2009-12-09 13:00:00 End Time: 2009-12-09 13:15:00Object Counter The_M_MGw_accessibility_in_percent 99.9883 temp_4_1_1_all_Aal2_and_Ip_TermsRej 5 temp_4_1_1_all_Aal2_and_Ip_TermsReq 14658 temp_4_1_1_all_Tdm_TermsRej 0 temp_4_1_1_all_Tdm_TermsReq 28185

Enter the report number followed by a piping command if postprocessing required.Eg "1" (no piping) or "3 | sort +2n". Type "m" to view the menu, type "x" to exit.Your Choice: 2

2) UG KPI - 4.2.1 Service Retainability - Healthy value range: 99.998-100% (long term average)Report from 2009-12-09 13:00 UTC to 2009-12-09 13:29 UTC

Start Time: 2009-12-09 13:00:00 End Time: 2009-12-09 13:15:00Object Counter Service_retainability_in_percent 100 temp_4_2_1_speech_and_CSD_fault_after_estab 0 temp_4_2_1_succ_Aal2_and_IP_estab 14653 temp_4_2_1_succ_Tdm_estab 28185

Filtering with pipes from the menu prompt:(example: sort report by the third column)

Enter the report number followed by a piping command if postprocessing required.Eg "1" (no piping) or "3 | sort +2n". Type "m" to view the menu, type "x" to exit.Your Choice: 8 | sort -k 2


gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090709-040311_9724/pmrbuffer9774.gz | /home/eanzmagn/moshell/pmXtab -fdef /home/eanzmagn/moshell/commonjars/pm/FORMULA_RNC_H_1_0.txt -x "^(NoRrcConnReq|NoRrcConnSuc|RrcFail|RrcFailContrib|RrcSuc)$" -i "NoRrcConnReq|NoRrcConnSuc|RrcFail|RrcFailContrib|RrcSuc" -m "(UtranCell=[^\s,=\t]+)" -r "(RncModule=[^\s,=\t]+)" -rdef /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090709-040311_9724/iubcellmodfile9774.processed -append -a -p 6.1 -pipe /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090709-040311_9724/pmrpipe9774 -fmt txt


Start Time: 2009-07-09 00:45:00 End Time: 2009-07-09 01:30:00 Object NoRrcConnReq NoRrcConnSuc RrcFail RrcFailContrib RrcSuc UtranCell=Iub-30-3 (Mod=1) 1765 1765 0 0 100 UtranCell=Iub-40-1 (Mod=8) 1645 1645 0 0 100 UtranCell=Iub-20-3 (Mod=1) 1643 1643 0 0 100 UtranCell=Iub-10-2 (Mod=13) 1626 1626 0 0 100 UtranCell=Iub-30-1 (Mod=1) 1623 1623 0 0 100 UtranCell=Iub-10-1 (Mod=13) 1613 1613 0 0 100 UtranCell=Iub-30-2 (Mod=1) 1596 1596 0 0 100 UtranCell=Iub-40-3 (Mod=8) 1586 1586 0 0 100 UtranCell=Iub-20-1 (Mod=1) 1582 1582 0 0 100 UtranCell=Iub-10-3 (Mod=13) 1574 1574 0 0 100 UtranCell=Iub-20-2 (Mod=1) 1554 1554 0 0 100 UtranCell=Iub-40-2 (Mod=8) 1514 1514 0 0 100 UtranCell=Iub-31-1 (Mod=8) 995 995 0 0 100 UtranCell=Iub-11-1 (Mod=13) 954 955 -0.1 -50 100.1 UtranCell=Iub-1-5 (Mod=8) 895 895 0 0 100 UtranCell=Iub-31-2 (Mod=8) 847 847 0 0 100 UtranCell=Iub-31-3 (Mod=8) 824 824 0 0 100 UtranCell=Iub-1-6 (Mod=8) 816 816 0 0 100 UtranCell=Iub-21-1 (Mod=1) 816 815 0.1 50 99.9 UtranCell=Iub-11-2 (Mod=13) 809 809 0 0 100 UtranCell=Iub-21-5 (Mod=1) 808 808 0 0 100 UtranCell=Iub-11-3 (Mod=13) 804 804 0 0 100 UtranCell=Iub-21-3 (Mod=1) 801 801 0 0 100 UtranCell=Iub-21-6 (Mod=1) 798 798 0 0 100 UtranCell=Iub-1-3 (Mod=8) 797 797 0 0 100 UtranCell=Iub-1-2 (Mod=8) 786 787 -0.1 -50 100.1 UtranCell=Iub-1-1 (Mod=8) 784 784 0 0 100...

Enter the report number followed by a piping command if postprocessing required.Eg "1" (no piping) or "3 | sort +2n". Type "m" to view the menu, type "x" to exit.Your Choice: x


Avoiding the menu prompt:

RNC11> pmr -r 1,7,10-12

1) RNC Node Traffic Performance Report from 2008-11-28 12:00 UTC to 2008-11-28 12:59 UTC

Start Time: 2008-11-28 12:00:00 End Time: 2008-11-28 12:45:00Object Counter CS57Drop 0 CS57RabSuc 100 CS64Access 100.2 CS64CCSR 72.9 CS64Drop 27.3 CS64NoRabEstAtt 519 CellFACHDrop 0 DCHMinperDrop 82.4 EULMinperDrop N/A EULRabSuc N/A EUL_NumRabEstAtt 0 FACHMinperDrop 97.6 HSMinperDrop 10.9 HsAccess 100.4 HsAvergNoUsers 24.0 HsRetransmissionRate 1.0 HsTputAverg 936.4 HsTputGt100KbAverg 972.5 IRATU2GCellChangeFailRate N/A IRATU2GHOSuccRate N/A NoAbnormalHsRel 33 NoHsRel 44 NoRrcConnReq 95462 NoRrcConnSuc 95462 OldHsDrop 75 PSAccess 100 PSCCSR 98.2 PSDCHRetransRate 1.0 PSDrop 1.8 PSIuSigSuc 100 PSRabSucc 100 PSRrcSucc 100 PsDCHFACHDropRate 1.2 PsDCHFACHRabSucc 100.0 RrcSuc 100


SpchAccess 100 SpchCCSR 100 SpchDrop 0 SpchIuSigSuc 100 SpchNoRabEstAtt 5469 SpchRabSuc 100 SpchRrcSuc 100


Start Time: 2008-11-28 12:00:00 End Time: 2008-11-28 12:45:00 Object NoRrcConnReq NoRrcConnSuc RrcFail RrcFailContrib RrcSuc Iub- 1-1 405 405 0 N/A 100 Iub-1-2 426 426 0 N/A 100 Iub-1-3 403 403 0 N/A 100 Iub-1-4 424 424 0 N/A 100 Iub-1-5 391 391 0 N/A 100 Iub-1-6 434 434 0 N/A 100 Iub-10-1 0 0 100 N/A N/A....

10) RNC UtranCell PS Data PerformanceReport from 2008-11-28 12:00 UTC to 2008-11-28 12:59 UTC

Start Time: 2008-11-28 12:00:00 End Time: 2008-11-28 12:45:00 Object CellFACHDrop DCHMinperDrop FACHMinperDrop PSAccess PSCCSR PSDrop PSDropContrib Iub- 1-1 0 N/A N/A 100 84.4 15.6 7.4 Iub-1-2 0 N/A N/A 100 97.9 2.1 1.1 Iub-1-3 0 N/A N/A 100 78.7 21.3 10.5 Iub-1-4 0 6.9 9.4 100 89.1 10.9 6.3 Iub- 1-5 0 5.4 7.1 100 86.5 13.5 5.3....

11) RNC UtranCell Throughput and NrUsersReport from 2008-11-28 12:00 UTC to 2008-11-28 12:59 UTC

Start Time: 2008-11-28 12:00:00 End Time: 2008-11-28 12:45:00 Object HsAvergNoUsers PSDlTputTot PSDlTputUser PSNoUsers PSUlTputTot PSUlTputUser Iub-1-1 1.0 126.8 178.3 5.0 21.0 64.1 Iub-1-2 0.3 115.6 157.0 5.5 19.7 60.5 Iub-1-3 1.2 131.4 182.3 6.9 22.2 69.6 Iub-1-4 0 116.4 152.5 6.5 19.4 61.4 Iub-1-5 0 106.4 139.4 4.2 18.9 58.6


Iub- 1-6 0 109.4 144.2 5.6 19.3 59.9 Iub-10-1 0 N/A N/A 0 N/A N/A....

Filtering with pipes:

RNC11> pmr -r 10-12 | grep Iub-1-1


Start Time: 2008-11-28 12:15:00 End Time: 2008-11-28 13:00:00 Object CellFACHDrop DCHMinperDrop FACHMinperDrop PSAccess PSCCSR PSDrop PSDropContrib Iub-1-1 0 N/A N/A 100 90 10 5.3


Start Time: 2008-11-28 12:15:00 End Time: 2008-11-28 13:00:00 Object HsAvergNoUsers PSDlTputTot PSDlTputUser PSNoUsers PSUlTputTot PSUlTputUser Iub-1-1 0.9 119.4 165.1 5.5 20.1 63.3

12) RNC UtranCell HSPA PerformanceReport from 2008-11-28 12:15 UTC to 2008-11-28 13:14 UTC

Start Time: 2008-11-28 12:15:00 End Time: 2008-11-28 13:00:00 Object EULMinperDrop HSMinperDrop HsAccess HsAvergNoUsers HsCellChAttempt HsCellChSuccRate NoAbnormalHsRel NoHsRel OldHSDropContrib OldHsDrop Iub- 1-1 N/A 2.6 100 0.9 0 N/A 5 5 15.6 100

RNC49> pmr -r 10-12 | egrep 'Iub-1-1|Iub-1-2|Iub-1-3'

10) RNC UtranCell CS Data PerformanceReport from 2009-07-16 03:15 UTC to 2009-07-16 04:14 UTC

Start Time: 2009-07-16 03:15:00 End Time: 2009-07-16 04:00:00 Object CS57Drop CS57RabSuc CS64Access CS64CCSR CS64Drop CS64DropContrib UtranCel l=Iub- 1-1 (Mod=1) N/A N/A N/A 0 N/A N/A UtranCell=Iub-1-2 (Mod=1) N/A N/A N/A 0 N/A N/A UtranCell=Iub-1-3 (Mod=1) N/A N/A N/A 0 N/A N/A



Start Time: 2009-07-16 03:15:00 End Time: 2009-07-16 04:00:00 Object CellFACHDrop DCHMinperDrop FACHMinperDrop PSAccess PSCCSR PSDrop PSDropContrib UtranCel l=Iub- 1-1 (Mod=1) N/A N/A N/A N/A 0 N/A N/A UtranCell=Iub-1-2 (Mod=1) N/A N/A N/A 0 0 N/A N/A UtranCell=Iub-1-3 (Mod=1) N/A N/A N/A N/A 0 N/A N/A


Start Time: 2009-07-16 03:15:00 End Time: 2009-07-16 04:00:00 Object HsAvgNoUsers PSDlDchTputTot PSDlDchTputUser PSUlDchTputTot PSUlDchTputUser PsAvgNoUsers UtranCel l=Iub- 1-1 (Mod=1) N/A N/A N/A N/A N/A N/A UtranCell=Iub-1-2 (Mod=1) N/A N/A N/A N/A N/A N/A UtranCell=Iub-1-3 (Mod=1) N/A N/A N/A N/A N/A N/A

Filtering by MO group:

For a specific MO:

RNC11> pmr -g UtranCell=Iub-1-1

For a group of MOs:

RNC11> ma freq1 utrancell uarfcndl <frequency1>

RNC11> pmr -g freq1

For a group of MOs:

RNC11> ma iubmod8 iublink moduleref module=8

RNC11> ma cellmod8 iubmod8 reservedby

RNC11> pmr -g cellmod8


Specify different report period:

RNC11> pmr –m 0.25 - r 1


RNC11> pmr -m 5 -p 2 -r 4

4) RNC MP LoadReport from 2006-07-09 04:45 UTC to 2006-07-09 06:44 UTC

Start Time: 2006-07-09 04:45:00 End Time: 2006-07-09 06:30:00Object Counter MS,Slot=10 MpLoad 1MS,Slot=11 MpLoad N/AMS,Slot=12 MpLoad N/AMS,Slot=13 MpLoad N/AMS,Slot=14 MpLoad 24.6MS,Slot=15 MpLoad N/AMS,Slot=16 MpLoad 24.7MS,Slot=17 MpLoad 1MS,Slot=18 MpLoad 0

Producing web report

RNC11> pmrwg -m 3 -w /home/eanzmagn/public_html/rnc11

get /p001200/pm_data/A20101015.1500-1515:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1500-1515.1.xml.gz ... OKget /p001200/pm_data/A20101015.1645-1700:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1645-1700.1.xml.gz ... OKget /p001200/pm_data/A20101015.1445-1500:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1445-1500.1.xml.gz ... OKget /p001200/pm_data/A20101015.1715-1730:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1715-1730.1.xml.gz ... OKget /p001200/pm_data/A20101015.1615-1630:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1615-1630.1.xml.gz ... OKget /p001200/pm_data/A20101015.1545-1600:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1545-1600.1.xml.gz ... OK


get /p001200/pm_data/A20101015.1600-1615:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1600-1615.1.xml.gz ... OKget /p001200/pm_data/A20101015.1700-1715:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1700-1715.1.xml.gz ... OKget /p001200/pm_data/A20101015.1515-1530:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1515-1530.1.xml.gz ... OKget /p001200/pm_data/A20101015.1630-1645:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1630-1645.1.xml.gz ... OKget /p001200/pm_data/A20101015.1730-1745:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1730-1745.1.xml.gz ... OKget /p001200/pm_data/A20101015.1530-1545:1.xml.gz /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/A20101015.1530-1545.1.xml.gz ... OK............

Using formulafile /home/eanzmagn/moshell/commonjars/pm/FORMULA_RNC_K_1_0.txtUsing configfile /home/eanzmagn/moshell/commonjars/pm/CONFIG_RNC_K_1_0.txtLast MO: 254. Loaded 254 MOs. Total: 255 MOs. MO Class: Aal5TpVccTp.Last MO: 258. Loaded 4 MOs. Total: 259 MOs. MO Class: CcDevice.Last MO: 270. Loaded 12 MOs. Total: 271 MOs. MO Class: DcDevice.Last MO: 310. Loaded 40 MOs. Total: 311 MOs. MO Class: IubLink.Last MO: 350. Loaded 40 MOs. Total: 351 MOs. MO Class: NbapCommon.Last MO: 354. Loaded 4 MOs. Total: 355 MOs. MO Class: PdrDevice.Last MO: 431. Loaded 77 MOs. Total: 432 MOs. MO Class: ReliableProgramUniter.Last MO: 434. Loaded 3 MOs. Total: 435 MOs. MO Class: RncModule.Last MO: 674. Loaded 240 MOs. Total: 675 MOs. MO Class: UniSaalTp.Last MO: 824. Loaded 150 MOs. Total: 825 MOs. MO Class: UtranCell.........................................................................................................................


2) RNC Node Traffic Performance, Hour by HourReport from 2010-10-15 14:45 UTC to 2010-10-15 17:44 UTC

3) RNC Node Traffic Performance, ROP by ROPReport from 2010-10-15 14:45 UTC to 2010-10-15 17:44 UTC

4) RNC Module Traffic PerformanceReport from 2010-10-15 14:45 UTC to 2010-10-15 17:44 UTC


....

61) Utrancell Paging PerformanceReport from 2010-10-15 14:45 UTC to 2010-10-15 17:44 UTC

62) RNC Used Capacities, Hour by HourReport from 2010-10-15 14:45 UTC to 2010-10-15 17:44 UTC

63) RNC IuPS throughput in kbps, Hour by HourReport from 2010-10-15 14:45 UTC to 2010-10-15 17:44 UTC

64) EthernetSwitchPort Tput in MbpsReport from 2010-10-15 14:45 UTC to 2010-10-15 17:44 UTC

Generating web report:cat /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/pmfiles/137.58.194.147/pm_data/pmrweb.log | /home/eanzmagn/moshell/commonjars/pmSummary.pl -force -html /home/eanzmagn/public_html/rnc11pmSummary.pl 1.1by Martin Aldrin, Henrik SchüllerWeb report has been generated successfully and stored under [/home/eanzmagn/public_html/rnc11/]

Output can be viewed on http: / / l ab72web.rnd.k i . sw.er icsson.se/~eanzmagn/rnc11/


http://lab72web.rnd.ki.sw.ericsson.se/~eanzmagn/rnc11/


Saving report to a static html page that can be sent by email

Click on “Create static HTML report”:--->

pmreport.html

http://lab72web.rnd.ki.sw.ericsson.se/~eanzmagn/pmrRbs/


http://lab72web.rnd.ki.sw.ericsson.se/~eanzmagn/pmrRbs/

Make your own pmr reports


The folder moshell/commonjars/pm contains the FORMULA files and CONFIG files for each type of node and SW release

** NONE ** eanzmagn@srld7243:=> ls -l moshell/commonjars/pm/total 4252drwxrwxrwx 2 eanzmagn rnd 4096 Sep 10 00:59 ./drwxr-xr-x 6 eanzmagn rnd 4096 Sep 14 14:08 ../-rwxrwxrwx 1 eanzmagn rnd 582 Sep 15 2005 CONFIG_CPP_3.txt*-rwxrwxrwx 1 eanzmagn rnd 14182 Mar 20 2007 CONFIG_MGW_R3.txt*-rwxrwxrwx 1 eanzmagn rnd 91291 Apr 16 16:58 CONFIG_MGW_R4.txt*-rwxrwxrwx 1 eanzmagn rnd 2407 Mar 21 2007 CONFIG_RBS_C_1_0.txt*-rwxrwxrwx 1 eanzmagn rnd 3025 Oct 7 2005 CONFIG_RNC_D_6_1.txt*-rwxrwxrwx 1 eanzmagn rnd 3609 Mar 8 2006 CONFIG_RNC_E_1_0.txt*-rwxrwxrwx 1 eanzmagn rnd 6096 Dec 22 2006 CONFIG_RNC_F_1_0.txt*-rwxrwxrwx 1 eanzmagn rnd 8458 Sep 10 00:58 CONFIG_RNC_G_1_0.txt*-rwxrwxrwx 1 eanzmagn rnd 1193 Mar 8 2006 FORMULA_CPP_3.txt*-rwxrwxrwx 1 eanzmagn rnd 18216 Mar 21 2006 FORMULA_MGW_R3.txt*-rwxrwxrwx 1 eanzmagn rnd 116252 Mar 20 2007 FORMULA_MGW_R4.txt*-rwxrwxrwx 1 eanzmagn rnd 9412 Mar 21 2007 FORMULA_RBS_C_1_0.txt*-rwxrwxrwx 1 eanzmagn rnd 9066 Feb 1 2007 FORMULA_RBS_J_5_0.txt*-rwxrwxrwx 1 eanzmagn rnd 3220 Mar 8 2006 FORMULA_RNC_D_6_1.txt*-rwxrwxrwx 1 eanzmagn rnd 3275 Mar 8 2006 FORMULA_RNC_E_1_0.txt*-rwxrwxrwx 1 eanzmagn rnd 5758 Jun 25 17:31 FORMULA_RNC_F_1_0.txt*-rwxrwxrwx 1 eanzmagn rnd 12083 Sep 10 00:58 FORMULA_RNC_G_1_0.txt*

The FORMULA file contains all the KPI formulas

** NONE ** eanzmagn@srld7243:=> cat moshell/commonjars/pm/FORMULA_RNC_G_1_0.txt #The formulas below are taken from the CPI DOCUMENT: SYSTEM PERFORMANCE STATISTICS 85/1553-HSD 101 02/5#0) More information on formula syntax: http://utran01.epa.ericsson.se/itkwiki/ViewWritersGuide/AppendixII#1) Any text starting with a '#' is treated as a comment and discarded#2) Each formula is split into the formula result variable name (part before the '=' sign) and the formula expression (the part after the '=' sign).#3) Any reference in the formula expression to a counter name of other formula name is replaced by a perl variable reference#4) The special names sum_<countername>, sum_time_<countername> and sum_mo_<countername> are replaced by a perl reference to variable containing counter aggregates#5) Each formula expression is then evaluated using perl 'eval'. This means that the syntax of the expressions is the same as that of perl - you can use any perl operators & functions.#6) If a formula is referenced within another formula, it has to be defined higher up in the file.#7) The formula names should not start with "pm"

SpchAccess = 100 * (pmTotNoRrcConnectReqCsSucc / (pmTotNoRrcConnectReqCs - pmNoLoadSharingRrcConnCs)) * (pmNoRabEstablishSuccessSpeech / (pmNoRabEstablishAttemptSpeech - pmNoDirRetryAtt) )CS64NoRabEstAtt = pmNoRabEstablishSuccessCs64


CS64Access = 100 * (pmTotNoRrcConnectReqCsSucc / pmTotNoRrcConnectReqCs) * (pmNoRabEstablishSuccessCs64 / pmNoRabEstablishAttemptCs64)

#old PSRabSucc#PSRabSucc = 100 * pmNoRabEstablishSuccessPacketInteractive / (pmNoRabEstablishAttemptPacketInteractive-(pmNoOutgoingHsHardHoAttempt-pmNoHsHardHoReturnOldChSource)+(pmNoIncomingHsHardHoAttempt-pmNoHsHardHoReturnOldChTarget))

#Streaming and Interactive PS RAB Succ Rate P5#PSRabSucc = 100 * (pmNoRabEstablishSuccessPacketInteractive + pmNoRabEstablishSuccessPacketStream + pmNoRabEstablishSuccessPacketStream128 ) / (pmNoRabEstablishAttemptPacketStream + pmNoRabEstablishAttemptPacketStream128 + (pmNoRabEstablishAttemptPacketInteractive-(pmNoOutgoingHsHardHoAttempt-pmNoHsHardHoReturnOldChSource)+(pmNoIncomingHsHardHoAttempt-pmNoHsHardHoReturnOldChTarget)))PSRabSucc = 100 * pmNoRabEstablishSuccessPacketInteractive / pmNoRabEstablishAttemptPacketInteractive

PSAccess = (pmTotNoRrcConnectReqPsSucc / pmTotNoRrcConnectReqPs) * PSRabSucc...<cut>....

The CONFIG file contains all the report specifications (what MO/counters/timeperiod will be on each axis)

X

Y Z

** NONE ** eanzmagn@srld7243:=> cat moshell/commonjars/pm/CONFIG_RNC_F_1_0.txt

#X/Y/Z Axis can be :# the counters/formulas# the MOClass (eg UtranCell, IubLink, RncModule)# the time: h (aggregate on hour), d (aggregate on day), a (aggregate on the whole period). If nothing specified there is no time aggregation, each ROP period is displayed separately.#Note1: The pmdiff flag has to be specified for Cello counters#Note2: It is possible to specify a mapfile that can specify any MO aggregation rules.# See the example report at the bottom of this file "RNC UtranCell Cluster RRC Performance"# In that example, each line of the mapfile would look like: UtranCell=XXX:Cluster=YYY


reportName RNC Node Traffic Performance X time aY counter NoRrcConnReq,RrcSuc,NoRrcConnSuc,SpchNoRabEstAtt,SpchRabSuc,SpchDrop,PSDrop,HsDrop,HsAccess,CS64Drop,SpchAccess,CS64Access,PSAccess,SpchCCSR,CS64CCSR,PSCCSR,HsTputAverg,HsTputGt100KbAverg,HsRetransmissionRate,HsAvergNoUsers,NoHsRel,CS57Drop,CS57RabSuc,PsDCHFACHRabSucc,PsDCHFACHDropRateZ mo ManagedElement=1precision 1

reportName RNC Node Traffic Performance, Hour by HourX time hY counter NoRrcConnReq,RrcSuc,NoRrcConnSuc,SpchNoRabEstAtt,SpchRabSuc,SpchDrop,PSDrop,HsDrop,HsAccess,CS64Drop,SpchAccess,CS64Access,PSAccess,SpchCCSR,CS64CCSR,PSCCSR,HsTputAverg,HsTputGt100KbAverg,HsRetransmissionRate,HsAvergNoUsers,NoHsRel,CS57Drop,CS57RabSuc,PsDCHFACHRabSucc,PsDCHFACHDropRateZ mo ManagedElement=1precision 1

reportName RNC Module Traffic PerformanceY mo (UtranCell=[^\s,=\t]+) -r RncModule=([^\s,=\t]+)X counter NoRrcConnReq,RrcSuc,NoRrcConnSuc,SpchNoRabEstAtt,SpchRabSuc,SpchDrop,PSDrop,CS64Drop,SpchAccess,CS64Access,PSAccess,SpchCCSR,CS64CCSR,CS57Drop,CS57RabSucZ time a

reportName RNC MP LoadX time aY mo Subrack=(.*,Slot=.*),Plu.*LoadControl=Z counter MpLoadprecision 1

reportName RNC MP Load, Hour by hourX time hY mo Subrack=(.*,Slot=.*),Plu.*LoadControl=Z counter MpLoadprecision 1

reportName RNC UtranCell RRC PerformanceX counter NoRrcConnReq,RrcSuc,NoRrcConnSuc,RrcFail,RrcFailContribY mo UtranCell=([^\s,=\t]+)Z time a

reportName RNC UtranCell Speech Performance X counter SpchNoRabEstAtt,SpchRabSuc,SpchRabSucContrib,SpchDrop,SpchDropContrib,SpchAccess,SpchCCSR


Y mo UtranCell=([^\s,=\t]+)Z time a

reportName RNC UtranCell Data PerformanceX counter PSDrop,CS64Drop,CS64Access,PSAccess,CS64CCSR,PSCCSR,CS64DropContrib,PSDropContrib,CS57Drop,CS57RabSucY mo UtranCell=([^\s,=\t]+)Z time a

reportName RNC UtranCell HSDPA PerformanceX counter NoAbnormalHsRel,NoHsRel,HsDrop,HsAccess,HSDropContrib,HsAvergNoUsers,HsCellChAttempt,HsCellChSuccRateY mo UtranCell=([^\s,=\t]+)Z time a

reportName RNC HSDPA Average Number of Users, Hour by HourX time hY counter HsAvergNoUsersZ mo UtranCell=([^\s,=\t]+)precision 2

reportName RNC UtranCell IRAT PerformanceX counter IRATU2GHOSuccRate,IRATU2GCellChangeFailRate,pmNoAttOutIratHoSpeechY mo (UtranCell=[^\s,=\t]+)Z time a

#MobilityreportName RNC UtranCell Soft HO PerformanceX counter SHOSuccess,pmNoTimesRlAddToActSet,pmNoTimesCellFailAddToActSet,SHOFailContribY mo (UtranCell=[^\s,=\t]+)Z time a

reportName RNC Worst 20 UtranCells for RRC Failure Rate ContributionX counter NoRrcConnReq,RrcSuc,NoRrcConnSuc,RrcFail,RrcFailContribY mo UtranCell=([^\s,=\t]+)Z time apipe sort +4nr | head -20

reportName RNC Worst 20 UtranCells for Speech Drop Rate ContributionX counter SpchNoRabEstAtt,SpchRabSuc,SpchRabSucContrib,SpchDrop,SpchDropContrib,SpchAccess,SpchCCSRY mo UtranCell=([^\s,=\t]+)Z time apipe sort +4nr | head -20

reportName RNC Worst 20 UtranCells for HS Drop Rate ContributionX counter HSDropContrib,HsAccess,HsAvergNoUsers,HsDrop,NoHsRel,NoAbnormalHsRelY mo UtranCell=([^\s,=\t]+)


Z time apipe sort +1nr | head -20

reportName RNC Worst 20 UtranCells for Soft HO Failure ContributionX counter SHOSuccess,pmNoTimesRlAddToActSet,pmNoTimesCellFailAddToActSet,SHOFailContribY mo (UtranCell=[^\s,=\t]+)Z time apipe sort +1nr | head -20

reportName RNC IubLink RRC PerformanceX counter NoRrcConnReq,RrcSuc,NoRrcConnSuc,RrcFail,RrcFailContribY mo (UtranCell=[^\s,=\t]+) -r IubLink=([^\s,=\t]+)Z time a

reportName RNC IubLink Speech Performance X counter SpchNoRabEstAtt,SpchRabSuc,SpchRabSucContrib,SpchDrop,SpchDropContrib,SpchAccess,SpchCCSRY mo (UtranCell=[^\s,=\t]+) -r IubLink=([^\s,=\t]+)Z time a

reportName RNC IubLink Data PerformanceX counter PSDrop,CS64Drop,CS64Access,PSAccess,CS64CCSR,PSCCSR,CS64DropContrib,PSDropContrib,CS57Drop,CS57RabSucY mo (UtranCell=[^\s,=\t]+) -r IubLink=([^\s,=\t]+)Z time a

#MobilityreportName RNC IubLink Soft HO PerformanceX counter SHOSuccess,pmNoTimesRlAddToActSet,pmNoTimesCellFailAddToActSet,SHOFailContribY mo (UtranCell=[^\s,=\t]+) -r IubLink=([^\s,=\t]+)Z time a

reportName RNC AtmPort RRC PerformanceX counter NoRrcConnReq,RrcSuc,NoRrcConnSuc,RrcFail,RrcFailContribY mo (UtranCell=[^\s,=\t]+) -r AtmPort=([^\s,=\t]+)Z time a

reportName RNC AtmPort Speech Performance X counter SpchNoRabEstAtt,SpchRabSuc,SpchRabSucContrib,SpchDrop,SpchDropContrib,SpchAccess,SpchCCSRY mo (UtranCell=[^\s,=\t]+) -r AtmPort=([^\s,=\t]+)Z time a

reportName RNC AtmPort Data PerformanceX counter PSDrop,CS64Drop,CS64Access,PSAccess,CS64CCSR,PSCCSR,CS64DropContrib,PSDropContrib,CS57Drop,CS57RabSucY mo (UtranCell=[^\s,=\t]+) -r AtmPort=([^\s,=\t]+)Z time a


reportName RNC UtranCell Availability Report, Hour by HourX time hY counter AvailabilityZ mo (UtranCell=[^\s,=\t]+)precision 1

#Note: This report requires the Aal2Ap counters to be activated in a scanner.reportName RNC Q.Aal2 Setup Performance (Aal2Ap)X counter Aal2SetupFail,Aal2Congestion,NoAal2SetupAttemptsY mo Aal2Ap=([^\s,=\t]+)Z time aprecision 2pmdiff

#reportName RNC Module VplTp Utilisation, Hour by Hour#X time h#Y counter VplTpUtilEgress,VplTpUtilIngress#Z mo (AtmPort=ES.*,VplTp=vp[^,]+)#precision 1

#reportName RNC UtranCell Cluster RRC Performance#X counter NoRrcConnReq,RrcSuc,NoRrcConnSuc,RrcFail,RrcFailContrib#Y mo (UtranCell=[^\s,=\t]+) -r Cluster=([^\s,=\t]+)#Z time a#mapfile /home/eanzmagn/clusterdef.txt

RNC11> l vi myconfig.txt

reportName RNC IubLink Data Performance hour by hourX counter PSDrop,CS64Drop,CS64Access,PSAccess,CS64CCSR,PSCCSR,CS64DropContrib,PSDropContrib,CS57Drop,CS57RabSucY mo (UtranCell=[^\s,=\t]+) -r IubLink=([^\s,=\t]+)Z time h

"myconfig.txt" [New file] 5 lines, 227 characters

RNC11> pmr -c myconfig.txt -m 5

Using formulafile /home/eanzmagn/moshell/commonjars/pm/FORMULA_RNC_F_1_0.txt

1) RNC IubLink Data Performance hour by hourEnter the report number followed by a piping command if postprocessing required.


Eg "1" (no piping) or "3 | sort +2n". Type "m" to view the menu, type "x" to exit.Your Choice: 1gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20060709-114521_1908/pmrbuffer1908.gz | /home/eanzmagn/moshell/pmXtab -fdef /home/eanzmagn/moshell/commonjars/pm/FORMULA_RNC_F_1_0.txt -x "^(CS57Drop|CS57RabSuc|CS64Access|CS64CCSR|CS64Drop|CS64DropContrib|PSAccess|PSCCSR|PSDrop|PSDropContrib)$" -i "CS57Drop|CS57RabSuc|CS64Access|CS64CCSR|CS64Drop|CS64DropContrib|PSAccess|PSCCSR|PSDrop|PSDropContrib|PSRabSucc|TotalPSRabs" -m "(UtranCell=[^\s,=\t]+)" -r "IubLink=([^\s,=\t]+)" -rdef /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20060709-114521_1908/iubcellmodfile1908.processed -h -p 6.1 -fmt txt

1) RNC IubLink Data Performance hour by hourReport from 2006-07-09 04:45 UTC to 2006-07-09 09:44 UTC

Date: 2006-07-09Time Object CS57Drop CS57RabSuc CS64Access CS64CCSR CS64Drop CS64DropContrib PSAccess PSCCSR PSDrop PSDropContrib04:00 1 N/A N/A N/A 0 N/A N/A 100 100 0 004:00 2 N/A N/A N/A 0 N/A N/A 0 0 N/A 004:00 3 N/A N/A 100 100 0 N/A 100 100 0 004:00 4 N/A N/A N/A 0 N/A N/A 100 93.3 6.7 9.104:00 5 N/A 100 N/A 0 N/A N/A 100 94.4 5.6 9.1etc...05:00 1 0 100 N/A 0 N/A N/A 100 95 5 13.005:00 2 N/A N/A N/A 0 N/A N/A 0 0 N/A 005:00 3 N/A N/A 100 100 0 N/A 100 100 0 005:00 4 N/A N/A N/A 0 N/A N/A 100 97.4 2.6 8.705:00 5 N/A N/A N/A 0 N/A N/A 100 97.0 3.0 8.7etc....06:00 1 0 100 N/A 0 N/A N/A 100 100 0 006:00 2 N/A N/A N/A 0 N/A N/A 0 0 N/A 006:00 3 N/A N/A 100 100 0 N/A 100 100 0 006:00 4 N/A N/A N/A 0 N/A N/A 100 98.6 1.4 4.806:00 5 N/A N/A N/A 0 N/A N/A 100 100 0 0etc....07:00 1 0 100 N/A 0 N/A N/A 100 98.3 1.7 4.507:00 2 N/A N/A N/A 0 N/A N/A 0 0 N/A 007:00 3 N/A N/A 100 100 0 N/A 98.1 96.7 1.5 4.507:00 4 N/A N/A N/A 0 N/A N/A 100 96.8 3.2 9.107:00 5 N/A N/A N/A 0 N/A N/A 100 100 0 0etc....08:00 1 0 100 N/A 0 N/A N/A 100 100 0 008:00 2 N/A N/A N/A 0 N/A N/A 0 0 N/A 008:00 3 N/A N/A 100 100 0 N/A 101.6 101.6 0 008:00 4 N/A N/A N/A 0 N/A N/A 100 100 0 008:00 5 0 N/A N/A 0 N/A N/A 100 100 0 0etc...09:00 1 0 100 N/A 0 N/A N/A 100 100 0 009:00 2 N/A N/A N/A 0 N/A N/A 0 0 N/A 0


09:00 3 N/A N/A 98.1 98.1 0 N/A 100 100 0 009:00 4 N/A N/A N/A 0 N/A N/A 100 95.3 4.7 16.709:00 5 0 N/A N/A 0 N/A N/A 100 100 0 0etc...

Enter the report number followed by a piping command if postprocessing required.Eg "1" (no piping) or "3 | sort +2n". Type "m" to view the menu, type "x" to exit.Your Choice: x

4.2.4 Faulty counter values

If the ROP files contain faulty counter values, they are discarded and a error message is shown.

There are four types of faults:- duplicated counter values. The duplicates are automatically discarded but it is recommended to remove the duplicates from the PM scanners to save

processing capacity in the node- suspected faulty counter values: these counters are marked by a special <sf> tag in the ROP file to indicate that their value is not reliable due to

possible interference from a crash or restart during that ROP period. By default the counters marked as <sf> are discarded but is possible to keep them with option “k” (pmrk/pmxk)

- empty counter values- negative counter values

The list of faulty counter values can be printed with the command “pmxs”

Example:

RNC11> pmr

INFO: There are 10 counters that appear several times in the ROP files, duplicated instances have been discarded.It is recommended to remove duplicate counter definitions from the PM scanners.To print the duplicated counters, run command "pmxs".

INFO: The ROP files contain 384 suspected faulty counter values.They have been discarded but can be kept with pmr/pmx option "k" (pmrk/pmxk) or highlighted with pmx option "s" (pmxs)

INFO: The ROP files contain 18 empty counter values.To print the empty counters, run command "pmxs".

INFO: The ROP files contain 40 negative counter values.To print the empty counters, run command "pmxs".


......

RNC11> pmxs

2011-01-18 09:15:00;ManagedElement=1,NodeBFunction=1,Sector=2,Carrier=2;pmAverageRssi;,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, (SuspectedFaulty)2011-01-18 09:15:00;ManagedElement=1,NodeBFunction=1,Sector=2,Carrier=2;pmTransmittedCarrierPowerW;,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, (SuspectedFaulty)2011-01-18 09:15:00;ManagedElement=1,NodeBFunction=1,Sector=2,Carrier=2;pmTransmittedCarrierPower;,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, (SuspectedFaulty)....2010-10-01 12:00:00;ManagedElement=1,Equipment=1,Subrack=1,UplinkBaseBandPool=1;pmSamplesCapacityUlCe; (EmptyCounter)2010-10-01 12:00:00;ManagedElement=1,Equipment=1,Subrack=1,UplinkBaseBandPool=1;pmSumCapacityUlCe; (EmptyCounter)2010-10-01 12:00:00;ManagedElement=1,Equipment=1,Subrack=1,UplinkBaseBandPool=1;pmCapacityUlCe; (EmptyCounter)....2010-11-01 12:00:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-2;pmSumFachPsIntRabEstablish;-210 (NegativeCounter)2010-11-01 11:15:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-2;pmSumFachPsIntRabEstablish;-206 (NegativeCounter)2010-11-01 11:15:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-1;pmSumFachPsIntRabEstablish;-253 (NegativeCounter)2010-11-01 11:30:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-2;pmSumFachPsIntRabEstablish;-263 (NegativeCounter)2010-11-01 11:30:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-1;pmSumFachPsIntRabEstablish;-210 (NegativeCounter)2010-11-01 11:45:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-2;pmSumFachPsIntRabEstablish;-252 (NegativeCounter)2010-11-01 11:45:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-1;pmSumFachPsIntRabEstablish;-205 (NegativeCounter)2010-11-01 12:00:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-2;pmSumFachPsIntRabEstablish;-210 (NegativeCounter)2010-11-01 12:00:00;ManagedElement=1,RncFunction=1,UtranCell=Iub-8-1;pmSumFachPsIntRabEstablish;-252 (NegativeCounter)

4.2.5 PM commands in offline mode

Fetch ROP files to default location

RNC11> pmrf -m 2

.................................................get /p001200/pm_data/A20090325.1100-1115:1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1100-1115.1.xml.gz ... OKget /p001200/pm_data/A20090325.1130-1145:1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1130-1145.1.xml.gz ... OKget /p001200/pm_data/A20090325.1145-1200:1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1145-1200.1.xml.gz ... OKget /p001200/pm_data/A20090325.1115-1130:1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1115-1130.1.xml.gz ... OK

zip -rj -n .gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/RNC11_ropfiles.zip /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1100-1115.1.xml.gz


/home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1115-1130.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1130-1145.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1145-1200.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1200-1215.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1215-1230.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1230-1245.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1245-1300.1.xml.gz adding: A20090325.1100-1115.1.xml.gz (stored 0%) adding: A20090325.1115-1130.1.xml.gz (stored 0%) adding: A20090325.1130-1145.1.xml.gz (stored 0%) adding: A20090325.1145-1200.1.xml.gz (stored 0%) adding: A20090325.1200-1215.1.xml.gz (stored 0%) adding: A20090325.1215-1230.1.xml.gz (stored 0%) adding: A20090325.1230-1245.1.xml.gz (stored 0%) adding: A20090325.1245-1300.1.xml.gz (stored 0%)Successful storage of the ROP files to /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/RNC11_ropfiles.zipFor offline processing, run: pmr/pmx[<options>] -l <zipfile>.

Fetch ROP files to specific location

RNC11> pmrf -m 2 ~/pmfiles

.................................................get /p001200/pm_data/A20090325.1300-1315:1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1300-1315.1.xml.gz ... OK

zip -rj -n .gz /home/eanzmagn/pmfiles/RNC11_ropfiles.zip /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1115-1130.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1130-1145.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1145-1200.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1200-1215.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1215-1230.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1230-1245.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1245-1300.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.147/pm_data/A20090325.1300-1315.1.xml.gz adding: A20090325.1115-1130.1.xml.gz (stored 0%) adding: A20090325.1130-1145.1.xml.gz (stored 0%) adding: A20090325.1145-1200.1.xml.gz (stored 0%) adding: A20090325.1200-1215.1.xml.gz (stored 0%) adding: A20090325.1215-1230.1.xml.gz (stored 0%) adding: A20090325.1230-1245.1.xml.gz (stored 0%) adding: A20090325.1245-1300.1.xml.gz (stored 0%) adding: A20090325.1300-1315.1.xml.gz (stored 0%)Successful storage of the ROP files to /home/eanzmagn/pmfiles/RNC11_ropfiles.zipFor offline processing, run: pmr/pmx[<options>] -l <zipfile>.


Run pmr offline

OFFLINE> pmr -l /home/eanzmagn/pmfiles/RNC11_ropfiles.zip

unzip -oq /home/eanzmagn/pmfiles/RNC11_ropfiles.zip -d /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles

Using formulafile /home/eanzmagn/moshell/commonjars/pm/FORMULA_RNC_G_1_0.txtUsing configfile /home/eanzmagn/moshell/commonjars/pm/CONFIG_RNC_G_1_0.txt

gzip -dc /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles/A20090325.1215-1230.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles/A20090325.1230-1245.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles/A20090325.1245-1300.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles/A20090325.1300-1315.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "ManagedElement" "^(pmCellDowntimeAuto|pmCellDowntimeMan|pmChSwitchSuccFachUra|pmCnInitPagingToIdleUe|pmCnInitPagingToIdleUeLa|pmCnInitPagingToIdleUeRa|pmFaultyTransportBlocksAcUl|pmNoAttOutIratHoSpeech|pmNoCellFachDisconnectAbnorm|pmNoCellFachDisconnectNormal|pmNoDirRetryAtt|pmNoFailedRabEstAttemptExceedConnLimit|pmNoFailedRabEstAttemptLackDlAse|pmNoFailedRabEstAttemptLackDlChnlCode|pmNoFailedRabEstAttemptLackDlHw|pmNoFailedRabEstAttemptLackDlHwBest|pmNoFailedRabEstAttemptLackDlPwr|pmNoFailedRabEstAttemptLackUlAse|pmNoFailedRabEstAttemptLackUlHw|pmNoFailedRabEstAttemptLackUlHwBest|pmNoHsCcAttempt|pmNoHsCcSuccess|pmNoIuSigEstablishAttemptCs|pmNoIuSigEstablishAttemptPs|pmNoIuSigEstablishSuccessCs|pmNoIuSigEstablishSuccessPs|pmNoLoadSharingRrcConn|pmNoLoadSharingRrcConnCs|pmNoLoadSharingRrcConnPs|pmNoNormalRabReleaseCs64|pmNoNormalRabReleaseCsStream|pmNoNormalRabReleasePacket|pmNoNormalRabReleasePacketUra|pmNoNormalRabReleaseSpeech|pmNoNormalRbReleaseHs|pmNoOutIratCcAtt|pmNoOutIratCcReturnOldCh|pmNoOutIratCcSuccess|pmNoPageDiscardCmpLoadC|pmNoPagingAttemptCnInitDcch|pmNoPagingAttemptUtranRejected|pmNoPagingType1A|pmNoRabEstablishAttemptAmrNb|pmNoRabEstablishAttemptCs57|pmNoRabEstablishAttemptCs64|pmNoRabEstablishAttemptPacketInteractive|pmNoRabEstablishAttemptPacketInteractiveEul|pmNoRabEstablishAttemptPacketInteractiveHs|pmNoRabEstablishAttemptPacketStream|pmNoRabEstablishAttemptPacketStream128|pmNoRabEstablishAttemptSpeech|pmNoRabEstablishSuccessCs57|pmNoRabEstablishSuccessCs64|pmNoRabEstablishSuccessPacketInteractive|pmNoRabEstablishSuccessPacketInteractiveEul|pmNoRabEstablishSuccessPacketInteractiveHs|pmNoRabEstablishSuccessSpeech|pmNoSuccessOutIratHoSpeech|pmNoSystemRabReleaseCs64|pmNoSystemRabReleaseCsStream|pmNoSystemRabReleasePacket|pmNoSystemRabReleasePacketUra|pmNoSystemRabReleaseSpeech|pmNoSystemRbReleaseEul|pmNoSystemRbReleaseHs|pmNoTimesCellFailAddToActSet|pmNoTimesRlAddToActSet|pmRopCounter|pmSamplesActDlRlcTotPacketThp|pmSamplesActDlRlcUserPacketThp|pmSamplesActUlRlcTotPacketThp|pmSamplesActUlRlcUserPacketThp|pmSamplesMeasuredLoad|pmSentPacketData1|pmSentPacketData2|pmSentPacketData3|pmSentPacketData4|pmSentPacketDataHs1|pmSentPacketDataHs2|pmSentPacketDataHs3|pmSentPacketDataHs4|pmSentPacketDataInclRetrans1|pmSentPacketDataInclRetrans2|pmSentPacketDataInclRetrans3|pmSentPacketDataInclRetrans4|pmSentPacketDataInclRetransHs1|pmSentPacketDataInclRetransHs2|pmSentPacketDataInclRetransHs3|pmSentPacketDataInclRetransHs4|pmSuccInConnsRemoteQosClassA|pmSuccInConnsRemoteQosClassB|pmSuccInConnsRemoteQosClassC|pmSuccInConnsRemoteQosClassD|pmSuccOutConnsRemoteQosClassA|pmSuccOutConnsRemoteQosClassB|pmSuccOutConnsRemoteQosClassC|pmSuccOutConnsRemoteQosClassD|pmSumActDlRlcTotPacketThp|pmSumActDlRlcUserPacketThp|pmSumActUlRlcTotPacketThp|pmSumActUlRlcUserPacketThp|pmSumBestDchPsIntRabEstablish|pmSumBestPsEulRabEstablish|pmSumBestPsHsAdchRabEstablish|pmSumFachPsIntRabEstablish|pmSumMeasuredLoad|pmSumUlRssi|pmTotNoRrcConnectReq|pmTotNoRrcConnectReqCs|pmTotNoRrcConnectReqCsSucc|pmTotNoRrcConnectReqPs|pmTotNoRrcConnectReqPsSucc|pmTotNoRrcConnectReqSuccess|pmTotNoTermRrcConnectReq|pmTotNoTermRrcConnectReqCs|pmTotNoTermRrcConnectReqCsSucc|pmTotNoTermRrcConnectReqPs|pmTotNoTermRrcConnectReqPsSucc|pmTotNoTermRrcConnectReqSucc|pmTotalPacketDurationHs3|pmTotalPacketDurationHs4|pmTransportBlocksAcUl|pmUnSuccInConnsLocalQosClassA|pmUnSuccInConnsLocalQosClassB|pmUnSuccInConnsLocalQosClassC|pmUnSuccInConnsLocalQosClassD|pmUnSuccInConnsRemoteQosClassA|


pmUnSuccInConnsRemoteQosClassB|pmUnSuccInConnsRemoteQosClassC|pmUnSuccInConnsRemoteQosClassD|pmUnSuccOutConnsLocalQosClassA|pmUnSuccOutConnsLocalQosClassB|pmUnSuccOutConnsLocalQosClassC|pmUnSuccOutConnsLocalQosClassD|pmUnSuccOutConnsRemoteQosClassA|pmUnSuccOutConnsRemoteQosClassB|pmUnSuccOutConnsRemoteQosClassC|pmUnSuccOutConnsRemoteQosClassD|sum|time)$".........................................

1) RNC Node Traffic Performance 2) RNC Node Traffic Performance, Hour by Hour 3) RNC Node Traffic Performance, ROP by ROP 4) RNC Module Traffic Performance 5) RNC Subrack Traffic Performance 6) RNC MP Load 7) RNC MP Load, Hour by hour 8) RNC UtranCell RRC Performance 9) RNC UtranCell Speech Performance 10) RNC UtranCell CS Data Performance11) RNC UtranCell PS Data Performanceetc....

Run pmx offline

RNC11> pmxh utrancell=[^,]+$ downtime|pmTotNoRrcConnectReq(Success)*$ -m 5 -p 2 -l /home/eanzmagn/pmfiles/RNC11_ropfiles.zip

unzip -oq /home/eanzmagn/pmfiles/RNC11_ropfiles.zip -d /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles

/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles/A20090325.1215-1230.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles/A20090325.1230-1245.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles/A20090325.1245-1300.1.xml.gz /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/ropfiles/A20090325.1300-1315.1.xml.gz | /home/eanzmagn/moshell/pmExtract -u "utrancell=[^,]+$" "downtime|pmtotnorrcconnectreq(success)*$" | /home/eanzmagn/moshell/pmXtab -a -cols ctr -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"


Start Time: 2006-07-09 04:30:00 End Time: 2006-07-09 06:15:00 Object pmCellDowntimeAuto pmCellDowntimeMan pmTotNoRrcConnectReq pmTotNoRrcConnectReqSuccess UtranCell=30101 0 0 497 496 UtranCell=30102 0 0 515 515 UtranCell=30103 0 0 492 491 UtranCell=30104 0 0 190 88 UtranCell=30105 0 0 190 89 UtranCell=30106 0 0 194 82 UtranCell=30107 0 0 508 507 UtranCell=30108 0 0 553 553


UtranCell=30109 0 0 463 463etc...

4.2.6 Reading instantaneous counter values - pget/pdiff commands

The counter values are read over corba in the same way as regular attributes, by using the “get” operation.Limitation: not supported on RNC application MOs (shown in red in “momt” printout). All other MO counters are supported. For CPP MOs, the counter values are refreshed continously, for RBS MOs, the value of the last ROP is shown, for MGW/ERBS MOs, the value of the last minute is shown. In some cases it is necessary to define a scanner in order for pget to work.

RNC11> h pget

*******************************************************pget/lpget [<moGroup>|<moFilter>|<proxy(s)>|all] [<attribute-filter>|all] [<value-filter>]*******************************************************Like get/lget, but only for viewing pm attributes.....

RNC11> pget atmport=ms-26-1

=================================================================================================================MO Attribute Value=================================================================================================================AtmPort=MS-26-1 pmReceivedAtmCells 296179250AtmPort=MS-26-1 pmSecondsWithUnexp 2AtmPort=MS-26-1 pmTransmittedAtmCells 543491448=================================================================================================================Total: 1 MOs

RNC11> h hpget

*******************************************************hpget[c]/lhpget[c] <moGroup>|<moFilter>|<proxy(s)> [<attribute-filter>] [<value1-filter>] [<value2-filter>] [<value3-filter>] etc...*******************************************************Similar to "pget" but attribute values are printed horizontally, one line per MO (instead of one line per counter).


...

RNC11> hpget atmport

=================================================================================================================MO pmReceivedAtmCells pmSecondsWithUnexp pmTransmittedAtmCells=================================================================================================================AtmPort=MS-26-2 190161265 3 365996132 AtmPort=MS-26-1 296287789 2 543702096 AtmPort=MS-7-2 0 0 0 AtmPort=MS-7-1 0 0 0 AtmPort=MS-6-2 0 0 0 AtmPort=MS-6-1 522602158 56 268066042 AtmPort=MS-27-2 0 0 0 AtmPort=MS-27-1 0 0 0 =================================================================================================================Total: 8 MOs

MGW4> pdiff os155 pmmsses

Logging to file: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20070411-034658_20440/boLog20440..waiting 25 seconds before next check....Log close: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20070411-034658_20440/boLog20440=================================================================================================================MO Counter DiffValue=================================================================================================================Subrack=4,Slot=25,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=4251 pmMsSes 0Subrack=4,Slot=23,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=4231 pmMsSes 3Subrack=3,Slot=25,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=3251 pmMsSes 0Subrack=3,Slot=23,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=3231 pmMsSes 0Subrack=2,Slot=9,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2092 pmMsSes 0Subrack=2,Slot=9,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2091 pmMsSes 5Subrack=2,Slot=8,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2082 pmMsSes 0Subrack=2,Slot=8,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2081 pmMsSes 0Subrack=2,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2072 pmMsSes 0


Subrack=2,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2071 pmMsSes 0Subrack=2,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2062 pmMsSes 0Subrack=2,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2061 pmMsSes 6Subrack=2,Slot=5,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2052 pmMsSes 0Subrack=2,Slot=5,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2051 pmMsSes 0Subrack=2,Slot=4,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2042 pmMsSes 0Subrack=2,Slot=4,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2041 pmMsSes 0Subrack=2,Slot=24,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2242 pmMsSes 0Subrack=2,Slot=24,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2241 pmMsSes 0Subrack=2,Slot=23,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2233 pmMsSes 0Subrack=2,Slot=23,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2232 pmMsSes 5Subrack=2,Slot=23,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2231 pmMsSes 0Subrack=2,Slot=22,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2223 pmMsSes 0Subrack=2,Slot=22,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2222 pmMsSes 0Subrack=2,Slot=22,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2221 pmMsSes 0Subrack=2,Slot=21,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2213 pmMsSes 0Subrack=2,Slot=21,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2212 pmMsSes 0Subrack=2,Slot=21,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2211 pmMsSes 0Subrack=2,Slot=11,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2112 pmMsSes 0Subrack=2,Slot=11,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2111 pmMsSes 0Subrack=2,Slot=10,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2102 pmMsSes 0Subrack=2,Slot=10,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2101 pmMsSes 0=================================================================================================================Total: 31 MOs

MGW4> pdiff os155 pmmsses !^0

Logging to file: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20070411-034658_20440/boLog20440..waiting 25 seconds before next check....Log close: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20070411-034658_20440/boLog20440=================================================================================================================MO Counter DiffValue=================================================================================================================Subrack=4,Slot=23,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=4231 pmMsSes 3Subrack=2,Slot=9,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2091 pmMsSes 5Subrack=2,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2061 pmMsSes 6Subrack=2,Slot=23,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2232 pmMsSes 5=================================================================================================================Total: 4 MOs


RNC11> uv pm_wait

pm_wait = 25

RNC11> uv pm_wait=30

pm_wait=30

4.2.7 Scanner commands

Note: any changes done from moshell to the PM scanners of a WRAN node that is connected to OSSRC are automatically undone by the OSSRC.

Print scanner list RNC11> h pst

*******************************************************pst [<scan-filter>|<scan-proxy>] [<scan-state>]*******************************************************List all PM scanners and their state.....

RNC11> pst

===================================================================PROXY SCANNER-NAME STATE===================================================================43 PREDEF.PRIMARY.STATS ACTIVE44 PREDEF.SECONDARY.STATS ACTIVE87 USERDEF.utrancell.STATS ACTIVE88 USERDEF.rncfunction.STATS ACTIVE89 USERDEF.CchFrameSynch.STATS ACTIVE90 USERDEF.DchFrameSynch.STATS ACTIVE91 USERDEF.IurLink.STATS ACTIVE92 USERDEF.LoadControl.STATS ACTIVE93 USERDEF.UeRc.STATS ACTIVE94 USERDEF.Gsmrelation.STATS ACTIVE95 USERDEF.UtranRelation.STATS ACTIVE


96 USERDEF.Paging.STATS ACTIVE97 USERDEF.LArea.STATS ACTIVE98 USERDEF.RArea.STATS ACTIVE===================================================================>>> Total: 14 Scanners

Print scanner contents

RNC11> h pgets

*******************************************************pgets[n] [<scan-filter>|<scan-proxy>] [<contents-filter>]*******************************************************The printout from this command shows the contents of one or more scanners. (Without argument, all scanners are printed.)....

RNC11> pgets primary

===================================================================43 PREDEF.PRIMARY.STATS ACTIVE 900 121===================================================================UtranCell 84 pmNoCsStreamDchDiscNormal pmNoCsStreamDchDiscAbnorm pmTotNoRrcConnectReq pmTotNoRrcConnectReqSuccess pmTotNoRrcConnectReqCs pmTotNoRrcConnectReqCsSucc pmTotNoRrcConnectReqPs......<cut>.......... pmSentPacketDataHs2 pmSentPacketDataInclRetransHs2 pmTotalPacketDurationHs2 pmNoOfPacketCallDurationHs2 pmSentPacketDataHs3 pmSentPacketDataInclRetransHs3 pmTotalPacketDurationHs3 pmNoOfPacketCallDurationHs3 pmSentPacketDataHs4 pmSentPacketDataInclRetransHs4 pmTotalPacketDurationHs4 pmNoOfPacketCallDurationHs4UeRc 2 pmTransportBlocksAcUl pmFaultyTransportBlocksAcUl


===================================================================>>> Total: 1 Scanners

Print number of counter instances defined in scanners

RNC11> pgetsn area

===================================================================97 USERDEF.LArea.STATS ACTIVE 900 1===================================================================LocationArea 1 pmCnInitPagingToIdleUeLa-------------------------------------------------------------------MOClass/MOInstance NrOfCountersInstancesLocationArea 3Total Nr of Counter Instances: 3Last MO: 6. Loaded 3 MOs. Total: 7 MOs. MO Class: RoutingArea.===================================================================98 USERDEF.RArea.STATS ACTIVE 900 1===================================================================RoutingArea 1 pmCnInitPagingToIdleUeRa-------------------------------------------------------------------MOClass/MOInstance NrOfCountersInstancesRoutingArea 3Total Nr of Counter Instances: 3===================================================================>>> Total: 2 Scanners>>> Total: 6 Counter Instances (6 active, 0 suspended)

Create scanner

RNC11> h pcr

*******************************************************pcr[cfd] <scannerName> <moclass-filter>|<moinstance-filter>|<mo-group>|<counter-file> [<counter-filter>] [<granularity>]*******************************************************Purpose: To create a STATS scanner. (EVENT scanners are already created by default and shall be set with the "pset" command).....

RNC11> pmom os155|atmp|plugin


##################################################################################MO Class Pm Counters##################################################################################AtmPort 3 pmReceivedAtmCells pmSecondsWithUnexp pmTransmittedAtmCells----------------------------------------------------------------------------------PlugInUnit 1 pmProcessorLoad----------------------------------------------------------------------------------Os155SpiTtp 5 currentPmRegister pmMsBbe pmMsEs pmMsSes pmMsUas----------------------------------------------------------------------------------

RNC11> pcr test os155|plug|atmp

>>> scannerId:145

RNC11> pgets test

===================================================================145 USERDEF.test.STATS ACTIVE 900 8===================================================================AtmPort 3 pmReceivedAtmCells pmSecondsWithUnexp pmTransmittedAtmCellsOs155SpiTtp 4 pmMsBbe pmMsEs pmMsSes pmMsUasPlugInUnit 1 pmProcessorLoad===================================================================>>> Total: 1 Scanners

Stop scanner

RNC11> pbl test


===================================================================142 USERDEF.test.STATS >>> Done.===================================================================>>> Total: 1 Scanners

RNC11> pst test

===================================================================PROXY SCANNER-NAME STATE===================================================================142 USERDEF.test.STATS SUSPENDED===================================================================>>> Total: 1 Scanners

Resume scanner

RNC11> pdeb test


RNC11> pst test

===================================================================PROXY SCANNER-NAME STATE===================================================================142 USERDEF.test.STATS ACTIVE===================================================================>>> Total: 1 Scanners

Delete scanner

RNC11> pdel test



RNC11> pst test

===================================================================PROXY SCANNER-NAME STATE======================================================================================================================================>>> Total: 0 Scanners

4.3 Event-based measurements

4.3.1 Viewing the list of events - emom command

RNC11> h emom

*******************************************************emom [uetr|gpeh|ctr|all] [<event-filter>]*******************************************************Display list of events available for each kind of event-based scanner.

...<cut>...

RNC11> emom uetr

The node's MOM version is: G_1_4_COMPLETE. Using following event files: - /home/eanzmagn/moshell/jarxml/event/EVENT_RNC_UETR_E_1_0.txt - /home/eanzmagn/moshell/jarxml/event/EVENT_RNC_CTR_E_1_0.txt - /home/eanzmagn/moshell/jarxml/event/EVENT_RNC_GPEH_G_1_0.txt==================================================================UETR EVENTS==================================================================MEASUREMENT 5 MEASUREMENT_DOWNLINK_TRANSPORT_CHANNEL_BLER MEASUREMENT_MAXIMUM_UE_TX_POWER MEASUREMENT_TRANSMITTED_CODE_POWER MEASUREMENT_UE_TRANSMITTED_POWER MEASUREMENT_UPLINK_SIRINTERNAL_EVENT 3 INTERNAL_MEAS_RLC_BUFFER_INFORMATION INTERNAL_MEAS_TRANSPORT_CHANNEL_BER INTERNAL_MEAS_TRANSPORT_CHANNEL_BLERRANAP 27 RANAP_DIRECT_TRANSFER RANAP_ERROR_INDICATION RANAP_IU_RELEASE_COMMAND....<cut>.....


RNSAP_RADIO_LINK_DELETION_REQUEST RNSAP_RADIO_LINK_DELETION_RESPONSE RNSAP_RADIO_LINK_FAILURE_INDICATION RNSAP_RADIO_LINK_RECONFIGURATION_CANCEL RNSAP_RADIO_LINK_RECONFIGURATION_COMMIT RNSAP_RADIO_LINK_RECONFIGURATION_FAILURE RNSAP_RADIO_LINK_RECONFIGURATION_PREPARE RNSAP_RADIO_LINK_RECONFIGURATION_READY RNSAP_RADIO_LINK_RESTORE_INDICATION RNSAP_RADIO_LINK_SETUP_FAILURE RNSAP_RADIO_LINK_SETUP_REQUEST RNSAP_RADIO_LINK_SETUP_RESPONSE RNSAP_UPLINK_SIGNALLING_TRANSFER_INDICATION

4.3.2 Event ROP file fetching and parsing - pme command

RNC11> h pme

*******************************************************pme[fd][cgu] [<pm_logdir>] [-m <minushours>] [-p <plushours>] [-s <startdate>[.<starttime>]] [-e <enddate>[.<endtime>]]*******************************************************Applicable for RNC only.To fetch and/or decode event ROP files (UETR/CTR/GPEH) for a given period, specified by the -m/-p/-s/-e options, see below for more information about time options.The "f" option is for fetching the ROP files, the "d" option is for decoding them.etc....

Fetching event ROP files

RNC11> pmef

get /p001200/pm/A20060709.1215-1230_UETR_10000.bin /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/uetr/pm/A20060709.1215-1230_UETR_10000.bin ... OKget /p001200/pm/A20060709.1200-1215_UETR_10000.bin /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/uetr/pm/A20060709.1200-1215_UETR_10000.bin ... OK

get /p001200/pm/A20060709.1215-1230_gpehfile:2.lnk /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/pm/A20060709.1215-1230_gpehfile.2.lnk ... OKget /p001200/pm/A20060709.1200-1215_gpehfile:2.lnk /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/pm/A20060709.1200-1215_gpehfile.2.lnk ... OK


get /p001200/A20060709.1200-1215_GPEH.lnk /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/A20060709.1200-1215_GPEH.lnk ... OKget /p001200/pm/A20060709.1215-1230_gpehfile:2.lnk /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/pm/A20060709.1215-1230_gpehfile.2.lnk ... OKget /p001200/pm/A20060709.1200-1215_gpehfile:2.lnk /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/pm/A20060709.1200-1215_gpehfile.2.lnk ... OK

get /p001400/A20060709.1215-1230_GPEH.lnk /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001400/A20060709.1215-1230_GPEH.lnk ... OK

get /p001600/A20060709.1215-1230_GPEH.lnk /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001600/A20060709.1215-1230_GPEH.lnk ... OK

etc....

Decoding event ROP files

RNC11> pmed

Cannot find the decoder.pl: /vobs/iov/rnc/bin/decoder.pl Please make sure the path to decoder.pl is correctly set in the moshell uservariable "decoder"

RNC11> uv decoder=/home/eanzmagn/decoder/decoder.pl

decoder=/home/eanzmagn/decoder/decoder.pl

RNC11> pmed/home/eanzmagn/decoder/decoder.pl --no_rlp --gpeh /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/uetr/pm/A20060709.1215-1230_UETR_10000.bin > /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/uetr/pm/A20060709.1215-1230_UETR_10000.bin.dec/home/eanzmagn/decoder/decoder.pl --no_rlp --gpeh /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/uetr/pm/A20060709.1200-1215_UETR_10000.bin > /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/uetr/pm/A20060709.1200-1215_UETR_10000.bin.dec/home/eanzmagn/decoder/decoder.pl --no_rlp --gpeh /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/pm/A20060709.1215-1230_gpehfile.2.lnk > /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/pm/A20060709.1215-1230_gpehfile.2.lnk.dec/home/eanzmagn/decoder/decoder.pl --no_rlp --gpeh /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/pm/A20060709.1200-1215_gpehfile.2.lnk > /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/pm/A20060709.1200-1215_gpehfile.2.lnk.dec/home/eanzmagn/decoder/decoder.pl --no_rlp --gpeh /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/pm/A20060709.1215-1230_gpehfile.2.lnk > /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/pm/A20060709.1215-1230_gpehfile.2.lnk.dec/home/eanzmagn/decoder/decoder.pl --no_rlp --gpeh /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/pm/A20060709.1200-1215_gpehfile.2.lnk > /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/pm/A20060709.1200-1215_gpehfile.2.lnk.dec/home/eanzmagn/decoder/decoder.pl --no_rlp --gpeh /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/A20060709.1200-1215_GPEH.lnk > /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001200/A20060709.1200-1215_GPEH.lnk.dec


/home/eanzmagn/decoder/decoder.pl --no_rlp --gpeh /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001400/A20060709.1215-1230_GPEH.lnk > /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/gpeh/p001400/A20060709.1215-1230_GPEH.lnk.decetc...

RNC11> lcd /home/eanzmagn/moshell_logfiles/logs_moshell/pmfiles/137.58.194.88/

RNC11> ftree . | xargs cat | flow.pl

(or find . -name ‘*.dec’ | xargs cat | flow.pl )

Fetching AND decoding

RNC11> pmedf

etc...

4.3.3 Scanner handling commands

Event filters already exist on the node. They cannot be created/deleted but their contents can be changed with “pset”

RNC11> pst uetr

===================================================================PROXY SCANNER-NAME STATE===================================================================99 PREDEF.10000.UETR SUSPENDED100 PREDEF.10001.UETR SUSPENDED101 PREDEF.10002.UETR SUSPENDED102 PREDEF.10003.UETR SUSPENDED103 PREDEF.10004.UETR SUSPENDED104 PREDEF.10005.UETR SUSPENDED105 PREDEF.10006.UETR SUSPENDED106 PREDEF.10007.UETR SUSPENDED107 PREDEF.10008.UETR SUSPENDED108 PREDEF.10009.UETR SUSPENDED109 PREDEF.10010.UETR SUSPENDED110 PREDEF.10011.UETR SUSPENDED111 PREDEF.10012.UETR SUSPENDED112 PREDEF.10013.UETR SUSPENDED113 PREDEF.10014.UETR SUSPENDED114 PREDEF.10015.UETR SUSPENDED===================================================================


>>> Total: 16 Scanners

UETR

RNC11> h pset

*******************************************************pset[d]*******************************************************Following syntaxes apply: * set filters for UETR: pset[d] <scan-filter>|<scan-proxy> <event-filter>|<event-file>|all <imsi> * set filters for CTR : pset[d] <scan-filter>|<scan-proxy> <event-filter>|<event-file>|all <moGroup>|<moFilter> [<trigger-event>] * set filters for GPEH: pset[d] <scan-filter>|<scan-proxy> <event-filter>|<event-file>|all [<moGroup>|<moFilter>|all] [<ue-fraction>]...

RNC11> pset 99 nbap|rnsap 123456789

===================================================================99 PREDEF.10000.UETR >>> Done.===================================================================

RNC11> pgets 99

===================================================================99 PREDEF.10000.UETR SUSPENDED 54===================================================================IMSI 123456789-------------------------------------------------------------------RNSAP 31 RNSAP_COMMON_TRANSPORT_CHANNEL_RESOURCES_FAILURE RNSAP_COMMON_TRANSPORT_CHANNEL_RESOURCES_RELEASE_REQUEST RNSAP_COMMON_TRANSPORT_CHANNEL_RESOURCES_REQUEST RNSAP_COMMON_TRANSPORT_CHANNEL_RESOURCES_RESPONSE RNSAP_COMPRESSED_MODE_COMMAND RNSAP_DEDICATED_MEASUREMENT_FAILURE_INDICATION RNSAP_DEDICATED_MEASUREMENT_INITIATION_FAILURE RNSAP_DEDICATED_MEASUREMENT_INITIATION_REQUEST RNSAP_DEDICATED_MEASUREMENT_INITIATION_RESPONSE RNSAP_DEDICATED_MEASUREMENT_REPORT RNSAP_DEDICATED_MEASUREMENT_TERMINATION_REQUEST RNSAP_DL_POWER_CONTROL_REQUEST RNSAP_DOWNLINK_SIGNALLING_TRANSFER_REQUEST RNSAP_ERROR_INDICATION


RNSAP_PAGING_REQUEST RNSAP_RADIO_LINK_ADDITION_FAILURE RNSAP_RADIO_LINK_ADDITION_REQUEST RNSAP_RADIO_LINK_ADDITION_RESPONSE RNSAP_RADIO_LINK_DELETION_REQUEST RNSAP_RADIO_LINK_DELETION_RESPONSE RNSAP_RADIO_LINK_FAILURE_INDICATION RNSAP_RADIO_LINK_RECONFIGURATION_CANCEL RNSAP_RADIO_LINK_RECONFIGURATION_COMMIT RNSAP_RADIO_LINK_RECONFIGURATION_FAILURE RNSAP_RADIO_LINK_RECONFIGURATION_PREPARE RNSAP_RADIO_LINK_RECONFIGURATION_READY RNSAP_RADIO_LINK_RESTORE_INDICATION RNSAP_RADIO_LINK_SETUP_FAILURE RNSAP_RADIO_LINK_SETUP_REQUEST RNSAP_RADIO_LINK_SETUP_RESPONSE RNSAP_UPLINK_SIGNALLING_TRANSFER_INDICATIONNBAP 23 NBAP_COMPRESSED_MODE_COMMAND NBAP_DEDICATED_MEASUREMENT_FAILURE_INDICATION NBAP_DEDICATED_MEASUREMENT_INITIATION_FAILURE NBAP_DEDICATED_MEASUREMENT_INITIATION_REQUEST NBAP_DEDICATED_MEASUREMENT_INITIATION_RESPONSE NBAP_DEDICATED_MEASUREMENT_REPORT NBAP_DEDICATED_MEASUREMENT_TERMINATION_REQUEST NBAP_DL_POWER_CONTROL_REQUEST NBAP_RADIO_LINK_ADDITION_FAILURE NBAP_RADIO_LINK_ADDITION_REQUEST NBAP_RADIO_LINK_ADDITION_RESPONSE NBAP_RADIO_LINK_DELETION_REQUEST NBAP_RADIO_LINK_DELETION_RESPONSE NBAP_RADIO_LINK_FAILURE_INDICATION NBAP_RADIO_LINK_RECONFIGURATION_CANCEL NBAP_RADIO_LINK_RECONFIGURATION_COMMIT NBAP_RADIO_LINK_RECONFIGURATION_FAILURE NBAP_RADIO_LINK_RECONFIGURATION_PREPARE NBAP_RADIO_LINK_RECONFIGURATION_READY NBAP_RADIO_LINK_RESTORE_INDICATION NBAP_RADIO_LINK_SETUP_FAILURE NBAP_RADIO_LINK_SETUP_REQUEST NBAP_RADIO_LINK_SETUP_RESPONSE===================================================================>>> Total: 1 Scanners

GPEH


RNC11> h pset

*******************************************************pset[d]*******************************************************Following syntaxes apply: * set filters for UETR: pset[d] <scan-filter>|<scan-proxy> <event-filter>|<event-file>|all <imsi> * set filters for CTR : pset[d] <scan-filter>|<scan-proxy> <event-filter>|<event-file>|all <moGroup>|<moFilter> [<trigger-event>] * set filters for GPEH: pset[d] <scan-filter>|<scan-proxy> <event-filter>|<event-file>|all [<moGroup>|<moFilter>|all] [<ue-fraction>]...

RNC11> pst gpeh

===================================================================PROXY SCANNER-NAME STATE===================================================================117 PREDEF.30000.GPEH SUSPENDED118 PREDEF.30001.GPEH SUSPENDED119 PREDEF.30002.GPEH SUSPENDED120 PREDEF.30003.GPEH SUSPENDED121 PREDEF.30004.GPEH SUSPENDED122 PREDEF.30005.GPEH SUSPENDED123 PREDEF.30006.GPEH SUSPENDED124 PREDEF.30007.GPEH SUSPENDED125 PREDEF.30008.GPEH SUSPENDED126 PREDEF.30009.GPEH SUSPENDED127 PREDEF.30010.GPEH SUSPENDED128 PREDEF.30011.GPEH SUSPENDED129 PREDEF.30012.GPEH SUSPENDED130 PREDEF.30013.GPEH SUSPENDED131 PREDEF.30014.GPEH SUSPENDED132 PREDEF.30015.GPEH SUSPENDED133 PREDEF.30016.GPEH SUSPENDED134 PREDEF.30017.GPEH SUSPENDED135 PREDEF.30018.GPEH SUSPENDED136 PREDEF.30019.GPEH SUSPENDED137 PREDEF.30020.GPEH SUSPENDED138 PREDEF.30021.GPEH SUSPENDED139 PREDEF.30022.GPEH SUSPENDED140 PREDEF.30023.GPEH SUSPENDED===================================================================>>> Total: 24 Scanners


RNC11> pset 30000 internal

===================================================================117 PREDEF.30000.GPEH >>> Done.===================================================================

RNC11> pgets 117

===================================================================117 PREDEF.30000.GPEH SUSPENDED 53=================================================================== -------------------------------------------------------------------GPEH_INTERNAL 53 INTERNAL_ADMISSION_CONTROL_RESPONSE INTERNAL_CELL_LOAD_MONITOR_UPDATE INTERNAL_CHANNEL_SWITCHING INTERNAL_CMODE_ACTIVATE INTERNAL_CMODE_DEACTIVATE INTERNAL_CNHHO_EXECUTION_ACTIVE INTERNAL_CONGESTION_CONTROL_CHANNEL_SWITCH_AND_TERMINATE_RC INTERNAL_DL_POWER_MONITOR_UPDATE INTERNAL_DOWNLINK_CHANNELIZATION_CODE_ALLOCATION INTERNAL_FAILED_HSDSCH_CELL_CHANGE INTERNAL_HSDSCH_CELL_SELECTION_NO_CELL_SELECTED INTERNAL_IFHO_EVALUATION INTERNAL_IFHO_EXECUTION INTERNAL_IFHO_EXECUTION_ACTIVE INTERNAL_IFHO_REPORT_RECEPTION INTERNAL_IRAT_CELL_CHANGE_DISCARDED_DATA INTERNAL_IRAT_HO_CC_EVALUATION INTERNAL_IRAT_HO_CC_EXECUTION INTERNAL_IRAT_HO_CC_REPORT_RECEPTION INTERNAL_MEASUREMENT_HANDLING_EVALUATION INTERNAL_MEASUREMENT_HANDLING_EXECUTION INTERNAL_MP_OVERLOAD INTERNAL_NBAP_ERROR INTERNAL_PACKET_DEDICATED_THROUGHPUT INTERNAL_PS_RELEASE_DUE_TO_CNHHO INTERNAL_RAB_ESTABLISHMENT INTERNAL_RAB_RELEASE INTERNAL_RADIO_QUALITY_MEASUREMENTS_RNH INTERNAL_RADIO_QUALITY_MEASUREMENTS_UEH INTERNAL_RANAP_ERROR INTERNAL_RBS_HW_MONITOR_UPDATE INTERNAL_RC_SUPERVISION


INTERNAL_RNSAP_ERROR INTERNAL_RRC_ERROR INTERNAL_SOFT_HANDOVER_EVALUATION INTERNAL_SOFT_HANDOVER_EXECUTION INTERNAL_SOFT_HANDOVER_REPORT_RECEPTION INTERNAL_SOHO_DS_MISSING_NEIGHBOUR INTERNAL_SOHO_DS_UNMONITORED_NEIGHBOUR INTERNAL_START_CONGESTION INTERNAL_STOP_CONGESTION INTERNAL_SUCCESSFUL_HSDSCH_CELL_CHANGE INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_NEW_ACTIVE_SET INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_OLD_ACTIVE_SET INTERNAL_SYSTEM_BLOCK INTERNAL_SYSTEM_RELEASE INTERNAL_TWO_NON_USED_FREQ_EXCEEDED INTERNAL_UE_MOVE INTERNAL_UE_POSITIONING_QOS INTERNAL_UE_POSITIONING_UNSUCC INTERNAL_UL_OUTER_LOOP_POWER_CONTROL INTERNAL_UPLINK_SCRAMBLING_CODE_ALLOCATION INTERNAL_IMSI===================================================================>>> Total: 1 Scanners

RNC11> pset 30001 error cell=

Last MO: 126. Loaded 120 MOs. Total: 127 MOs. MO Class: UtranCell.===================================================================118 PREDEF.30001.GPEH >>> Done.===================================================================

RNC11> pgets 30001

===================================================================118 PREDEF.30001.GPEH SUSPENDED 7===================================================================CELL ManagedElement=1,RncFunction=1,UtranCell=301110CELL ManagedElement=1,RncFunction=1,UtranCell=301109CELL ManagedElement=1,RncFunction=1,UtranCell=301108CELL ManagedElement=1,RncFunction=1,UtranCell=301107CELL ManagedElement=1,RncFunction=1,UtranCell=301106CELL ManagedElement=1,RncFunction=1,UtranCell=301105CELL ManagedElement=1,RncFunction=1,UtranCell=301104CELL ManagedElement=1,RncFunction=1,UtranCell=301103CELL ManagedElement=1,RncFunction=1,UtranCell=301102


CELL ManagedElement=1,RncFunction=1,UtranCell=301101.....<cut>....CELL ManagedElement=1,RncFunction=1,UtranCell=30114CELL ManagedElement=1,RncFunction=1,UtranCell=30113CELL ManagedElement=1,RncFunction=1,UtranCell=30112CELL ManagedElement=1,RncFunction=1,UtranCell=30111-------------------------------------------------------------------RNSAP 1 RNSAP_ERROR_INDICATIONRANAP 1 RANAP_ERROR_INDICATIONGPEH_INTERNAL 4 INTERNAL_NBAP_ERROR INTERNAL_RANAP_ERROR INTERNAL_RNSAP_ERROR INTERNAL_RRC_ERRORNBAP 1 NBAP_ERROR_INDICATION===================================================================>>> Total: 1 Scanners

RNC11> pset 30002 error all 500

===================================================================119 PREDEF.30002.GPEH >>> Done.===================================================================

RNC11> pgets 119

===================================================================119 PREDEF.30002.GPEH SUSPENDED 7===================================================================UE_FRACTION 500-------------------------------------------------------------------RNSAP 1 RNSAP_ERROR_INDICATIONRANAP 1 RANAP_ERROR_INDICATIONGPEH_INTERNAL 4 INTERNAL_NBAP_ERROR INTERNAL_RANAP_ERROR INTERNAL_RNSAP_ERROR INTERNAL_RRC_ERRORNBAP 1 NBAP_ERROR_INDICATION===================================================================>>> Total: 1 Scanners

RNC11> pset 30003 error cell=30111 100

===================================================================120 PREDEF.30003.GPEH >>> Done.===================================================================


RNC11> pgets 120

===================================================================120 PREDEF.30003.GPEH SUSPENDED 7===================================================================UE_FRACTION 100CELL ManagedElement=1,RncFunction=1,UtranCell=301117CELL ManagedElement=1,RncFunction=1,UtranCell=301116CELL ManagedElement=1,RncFunction=1,UtranCell=301115CELL ManagedElement=1,RncFunction=1,UtranCell=301114CELL ManagedElement=1,RncFunction=1,UtranCell=301113CELL ManagedElement=1,RncFunction=1,UtranCell=301112CELL ManagedElement=1,RncFunction=1,UtranCell=301111CELL ManagedElement=1,RncFunction=1,UtranCell=301110CELL ManagedElement=1,RncFunction=1,UtranCell=30111CELL ManagedElement=1,RncFunction=1,UtranCell=301119CELL ManagedElement=1,RncFunction=1,UtranCell=301118-------------------------------------------------------------------RNSAP 1 RNSAP_ERROR_INDICATIONRANAP 1 RANAP_ERROR_INDICATIONGPEH_INTERNAL 4 INTERNAL_NBAP_ERROR INTERNAL_RANAP_ERROR INTERNAL_RNSAP_ERROR INTERNAL_RRC_ERRORNBAP 1 NBAP_ERROR_INDICATION===================================================================>>> Total: 1 Scanners

5 LOG COMMANDS

5.1 LOG Interface

A number of logs on store on the /c volume of the node:- alarm and event history- restart and upgrade history: node restarts, board restarts, program restarts, processor crashes, board upgrades, node upgrades- O&M history: MO commands, COLI commands, AMOS commands, O&M connection attempts

These logs can be fetched via ftp or sftp.


The CPP logs are stored in files in the folders /c/logfiles , /c/systemfiles and /c/pmd.

RNC11> ftreef /c/logfiles

-rw-rw-rw- 1999990 8 Jul 2009 12:13:51 /c/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml-rw-rw-rw- 2999992 9 Jul 2009 06:33:40 /c/logfiles/alarm_event/ALARM_LOG.xml-rw-rw-rw- 499741 4 Jul 2009 12:14:37 /c/logfiles/alarm_event/EVENT_LOG.xml-rw-rw-rw- 28795 15 Jun 2009 19:40:54 /c/logfiles/hw_inventory/CELLO_HWINVENTORY_LOG.xml.bak-rw-rw-rw- 26058 20 Jun 2009 07:05:13 /c/logfiles/hw_inventory/CELLO_HWINVENTORY_LOG.xml-rw-rw-rw- 102400 9 Jul 2009 06:34:24 /c/logfiles/security/CELLO_SECURITYEVENT_LOG.xml-rw-rw-rw- 1392889 9 Jul 2009 06:34:22 /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml-rw-rw-rw- 2999918 9 Jul 2009 06:34:20 /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml-rw-rw-rw- 1573030 7 Jul 2009 08:49:58 /c/logfiles/audit_trail/X911040657_CORBA_AUDITTRAIL_LOG_20090707T084959.push-rw-rw-rw- 1573030 7 Jul 2009 08:49:58 /c/logfiles/audit_trail/X911040657_SHELL_AUDITTRAIL_LOG_20090707T084959.push-rw-rw-rw- 1047623 21 Oct 2007 06:50:59 /c/logfiles/systemlog/00000syslog-rw-rw-rw- 1047442 7 Apr 2009 15:01:07 /c/logfiles/systemlog/00001syslog-rw-rw-rw- 668375 9 Jul 2009 06:33:39 /c/logfiles/systemlog/00002syslog

LTE only:-rw-rw-rw- 2366 14 Oct 2010 11:56:26 /c/logfiles/troubleshooting/error/lmcell_serverDisconnectedInd_rnhRrcSigSysInfoC-rw-rw-rw- 3545 14 Oct 2010 11:56:26 /c/logfiles/troubleshooting/error/lmcell_serverDisconnectedInd_rnhCellRoC-rw-rw-rw- 17761 14 Oct 2010 11:56:27 /c/logfiles/troubleshooting/error/lmcentral_serverDisconnectedInd_omfC-rw-rw-rw- 14860 14 Oct 2010 11:56:27 /c/logfiles/troubleshooting/error/lmcell_serverDisconnectedInd_uehUeCtxtHandlerC

RNC11> ftreef /c/systemfiles

-rw-rw-rw- 1186786 7 Jul 2009 05:56:28 /c/systemfiles/cello/cma/su/trace/Trace.log-rw-rw-rw- 2557 15 Jun 2009 20:43:37 /c/systemfiles/cello/cma/su/prop/Trace_01.prop

RNC11> ftreef /c/pmd

-rw-rw-rw- 60496 18 Sep 2007 12:22:24 /c/pmd/1/001600/0x15aa234f.pmd-rw-rw-rw- 64728 20 Sep 2007 19:51:38 /c/pmd/2/001600/0x15aa2357.pmd-rw-rw-rw- 38880 2 Oct 2007 04:04:06 /c/pmd/3/001600/0x15aa237b.pmd-rw-rw-rw- 44412 2 Oct 2007 04:04:08 /c/pmd/4/001600/0x15aa237e.pmd-rw-rw-rw- 42420 2 Oct 2007 04:04:09 /c/pmd/5/001600/0x15aa2381.pmd-rw-rw-rw- 49404 2 Oct 2007 04:43:13 /c/pmd/6/001600/0x15aa23b0.pmd-rw-rw-rw- 46728 2 Oct 2007 04:43:14 /c/pmd/7/001600/0x15aa23b3.pmd-rw-rw-rw- 3392 2 Oct 2007 04:43:15 /c/pmd/8/001600/0x15aa23b6.pmd-rw-rw-rw- 3504 2 Oct 2007 04:43:16 /c/pmd/9/001600/0x15aa23b7.pmd-rw-rw-rw- 42268 2 Oct 2007 20:00:43 /c/pmd/10/001600/0x15aa23bf.pmd...<cut>...


-rw-rw-rw- 85084 9 May 2009 08:34:42 /c/pmd/116/001000/0x2db6faa0.pmd-rw-rw-rw- 65536 5 Jun 2009 09:50:05 /c/pmd/119/001918/0x00000002.pmd-rw-rw-rw- 142304 1 Jul 2009 12:48:09 /c/pmd/120/001100/0x4fb5acbe.pmd-rw-rw-rw- 124864 1 Jul 2009 13:55:04 /c/pmd/123/001000/0x2db6fb4d.pmd-rw-rw-rw- 84668 1 Jul 2009 13:55:00 /c/pmd/121/000100/0xff0001b1.pmd-rw-rw-rw- 84216 1 Jul 2009 13:55:03 /c/pmd/122/000000/0xfdbe819e.pmd

The “lg” command can be used to fetch and process these logs.

OFFLINE> h lg

*******************************************************lg[acdefghilmnopqrstuvwxyz] [-l <logdirectory|logfile|zipfile>] [-m <minustime>] [-p <plustime>] [-s <startdate>] [-e <enddate>] [-g <boardgroup>] [-n <nodefilter>] [|<unixcmds>]*******************************************************Fetching and processing of node logs

All options can be combined together, except options "d","w","x","f" which can only be combined with the options "r" and "c".

Log Options:************ - a: Alarm log (ALARM_LOG.xml). History of alarms rais ing and ceasing. - x: Active alarms (ALARM_LOG.xml). Snapshot of alarms active on a specific date/time given in -m/-s option. - e: Event log (EVENT_LOG.xml). History of MO events. - v: Availability log (CELLO_AVAILABILITY2_LOG.xml). History of node/board/program restarts. - s: System log (/c/logfiles/systemlog). History of node/board/program restarts. - p: Post Mortem Dumps (/c/pmd). History of board/program crashes. PMD files are saved permanently in moshell_logfiles/logs_moshell/pmdfiles/<nodeaddress>/pmd . - u: Upgrade log (Trace.log and Trace.log_old). History of system upgrades. - d: Downtime log. History of node outages. - o: MO command log (CORBA_AUDITTRAIL_LOG.xml). History of MO write commands (set/action/create/delete). - q: MO command log in "trun" format (CORBA_AUDITTRAIL_LOG.xml). Useful for recovering configuration data which was not saved to CV before node restart. - l: COLI command log (SHELL_AUDITTRAIL_LOG.xml). History of COLI commands. - n: Moshell command log. To specify different or all nodes, use the "-n <node-filter>" option. If "-m" or "-s" option are not specified, the default is to show command history of the last 30 days. - y: SecurityEvent log (CELLO_SECURITYEVENT_LOG.xml). History of O&M connection setups. - w: Active O&M connections (CELLO_SECURITYEVENT_LOG.xml). Snapshot of O&M connections on a specific date/time given in -m/-s option. - z: IpSec log (CELLO_IPTRAN_LOG.xml). - t : T&E log ( lh al l te log read. to speci fy a di f ferent boardgroup than "al l " , use the "- g" option) . Trace and Error Log. - g: Board Restart error log (lh allp llog -l ; lh ru llog -l -n 5). - h: HW Inventory log (CELLO_HWINVENTORY_LOG.xml). This file must first be generated with the command "hili mk". Format Options:


************** - m: merge the different logs together (eg: lgaevm will merge alarm/event/availability logs). - i: inverse chronological order. - r: refetch the logs from the node. Logs are only fetched once and kept in cache. This option is used to refresh the session cache. - c: print the output in csv format (semicolon separation). - f: fetch the logs only and store them in a directory on the workstation.

Time filtering:*************** - The "-s" and "-e" options are used for specifying an absolute timespan: -s gives the starting date and -e gives the ending date. The format is yyyymmdd[.hhmm], for instance 20071230, or 20071230.0800. - The "-m" and "-p" options are used for specifying a timespan relative to today's date: -m gives how long time backward and -p gives how long time forward. The format is in days, hours, or minutes, eg. 10d (10 days), 2h (2 hours), 30m (30 minutes).Note: the switch "-s"/"-m" can sometimes be omitted. E.g. "lgo 14" can be used instead of "lgo -m 14", and "lgo 20080701.1200" can be used instead of "lgo -s 20080701.1200". This works only when the options -e/-p are not used.

Offline usage:**************The "-l" option allows to process the logfiles in offline mode, when not connected to the node.The argument of the "-l" option specifies the location where the logfile(s) are locally stored on the workstation. It can be: - a single logfile - a directory containing several logfiles. - a zipped archive containing one or more logfiles.By running the command "lgf" while connected to the node, it is possible to download all the logfiles to a local directory for later offline processing. The local directory can be specified as argument. If not specified, a default location is chosen (~/moshell_logfiles/logs_moshell/lg/nodeaddress/date_time). The local directory is then automatically compressed and saved in a zipped archive.

Notes:******- The output of the lg command can be filtered by piping to a unix command such as "grep", "sort", "less", etc.- In "lga", the Alarm severity field is shortened to one character: C=Critical, M=Major, m=minor, w=warning,*=cleared.- In "lgd", the downtime values correspond to the following stages: * CPP downtime is the time elapsed between the row "CRIT Node down" and the row "Node operational." in syslog or the row "NODE IN Operational" in avlog (whichever row comes first). * Application downtime is the time elapsed between the row "CRIT Node down" in syslog and the row "RNC Node Restart Completed" (RNC) , "Cell .* enabled" (WRBS) , "VMGWs Unlocked/First VMGw Enabled" (MGW), or "IN Operational CELL" (ERBS) in avlog.

* Jvm downtime is the time elapsed between the row "CRIT Node down" in syslog and the row "JVM Load Module is now operational" in avlog or the row "The Configuration Service is up and running" in upgradelog. * The node downtime figures in the summary table at the end of the printout represent the highest value between CPP downtime and Application downtime. The partial downtime figures are weighted against percentage of availability (when applicable).

Examples:********* >> lga -s 20050705 -e 20050710 --> show alarm log entries between the dates 20050705 and 20070710


>> lgaemc | grep -i atmport --> show all entries from the alarm/event logs matching the word "atmport" (case insensitive), display in CSV format (semicolon separated), pipe to grep >> lgx -m 14 --> show alarms that were active 14 days ago >> lgxc -s 20080704.1330 --> show alarms that were active on the 2008-07-04 at 13:30 and print output in CSV format >> lgvsm -s 20050705.1000 --> show all entries from system log and availability log since the 20070705 at 10:00, merged in chronological order >> lgar -m 10d -p 30m --> refetch the alarm log and show all its entries starting from 10 days ago and until 30 minutes from then. >> lgf --> fetch all logs from the node and put them in the default location ~/moshell_logfiles/logs_moshell/lg/nodeaddress/date_time/node_logfiles.zip >> lgf /home/user/logs/rnc10 --> fetch all logs from the node and put them in the zipped file /home/user/logs/rnc10/<node>_logfiles.zip >> lgaemic -m 10h -l ~/moshell_logfiles/logs_moshell/lg/rnc10/20071122_1425 --> parse the last 10 hours of the alarm and event logs stored in the folder ~/moshell_logfiles/logs_moshell/lg/rnc10/20071122_1425, merge them and display them in CSV format and reverse chronological order >> lgd -m 30d --> show all node restarts and system downtime from the past 30 days >> lgt -g mp --> show the T&E logs of the boards of the board group "mp", sorted in chronological order >> lgtaom -m 12h --> show the T&E logs of all boards merged with the alarm log and audit trail, for the past 12 hours >> lgn -m 5 -n 137.58 --> show the moshell command log for the past 5 days for all nodes whose address matches 137.58

5.2 Alarm and Event history

Alarms: when faults have a state and can be ‘fixed’ by operatorEvents: for stateless faults and/or when the operator really can’t do much about it.

Alarm log5 Possible alarm severities:

- C = Critical- M = Major- m = minor- w = warning- * = cleared

STP49> lga

Startdate=19661031.151320, Enddate=20110831.042537Parsing alarmLog....Done.====================================================================================================================Timestamp (UTC) S Problem MO (Cause/AdditionalInfo)====================================================================================================================2011-06-08 11:53:19 AL M Security Level Fault Security=1 (Node Credentials Failure. Security Config Data Failure.)2011-06-08 11:53:19 AL m Password File Fault Security=1 (configuration_or_customizing_error)2011-06-08 11:53:43 AL C License Key File Fault Licensing=1 (No license key file installed)2011-06-08 11:53:45 AL C Loss of System Clock Synchronization=1 (replaceable_unit_problem)


2011-06-08 11:53:46 AL C RncCapacity_ConfiguredLimitExceedsLicensedLimit Licensing=1,RncCapacity=IubThroughput (OperatorCapacityLimit: -1443397192 | LicensedCapacityLimit: -1443397192)2011-06-08 11:55:44 AL w Auto-Configuration of Board Not Possible Subrack=MS,Slot=4 (Alarm Cause: Auto-configuration disabled, the configuration doesn't match the inserted board. | PiuType product number:: ROJ1192104/4 | PiuType product revision:: *)2011-06-08 11:59:41 AL M Gigabit Ethernet Link Fault Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 (GIGA_LH_ETHERNET_LINK_FAULT 1)2011-06-08 11:59:42 AL M PdrDevice_DeviceDisabled SpDevicePool=PdrDevice,PdrDevice=1 (disableCause: DeviceNotInstalled)...Subrack=MS,Slot=25,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=7 (NO_SFP_MODULE_INSTALLED)2011-06-08 12:03:54 AL M Ethernet Switch Port Fault Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=1 (LINK_DOWN)2011-06-08 12:03:54 AL M Ethernet Switch Port Fault Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=2 (LINK_DOWN)....2011-06-08 13:12:29 AL * Eul_NbapMessageFailure UtranCell=Iub-1095-2,Hsdsch=1,Eul=1 (nbapCause: downlink_shared_channel_type_not_supported)2011-06-08 13:14:47 AL M Eul_NbapMessageFailure UtranCell=Iub-1095-3,Hsdsch=1,Eul=1 (nbapCause: downlink_shared_channel_type_not_supported)....

STP49> lgj

Startdate=19661031.151320, Enddate=20110831.042537Parsing alarmLog....Done.Parsing sysLog...Done.Parsing upgLog................Done...............Alarm durations from 1970-01-01 at 01:00:00 to 2011-08-30 at 04:25:46=========================================================================================================================================Date & Time (UTC) S Duration Specific Problem MO (Cause/AdditionalInfo)=========================================================================================================================================2011-06-08 11:53:45 C* 179s (2m59s) Loss of System Clock Synchronization=1 (replaceable_unit_problem)2011-06-08 11:53:46 C* 178s (2m58s) RncCapacity_ConfiguredLimitExceedsLicensedLimit Licensing=1,RncCapacity=IubThroughput (OperatorCapacityLimit: -1443397192 | LicensedCapacityLimit: -1443397192)2011-06-08 11:55:44 w* 60s (1m0s) Auto-Configuration of Board Not Possible Subrack=MS,Slot=4 (Alarm Cause: Auto-configuration disabled, the configuration doesn't match the inserted board. | PiuType product number:: ROJ1192104/4 | PiuType product revision:: *)......2011-06-08 11:59:41 M* 3s Gigabit Ethernet Link Fault Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 (GIGA_LH_ETHERNET_LINK_FAULT 1)2011-06-08 11:59:42 M* 158s (2m38s) CcDevice_DeviceDisabled SpDevicePool=CcDevice,CcDevice=1 (disableCause: DeviceNotInstalled)2011-06-08 11:59:44 M* 2s Gigabit Ethernet Link Fault Subrack=MS,Slot=24,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 (GIGA_LH_ETHERNET_LINK_FAULT 1)2011-06-08 11:59:44 w* 156s (2m36s) Gigabit Ethernet Link Redundancy Fault Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 (Gigabit Ethernet Redundancy Fault for link 1. 1)...

STP49> lgx -s 20110810.1400


Startdate=19661031.151320, Enddate=20110810.140000Parsing alarmLog....Done.Parsing sysLog...Done.Parsing upgLog...............Done...............Nr of active alarms on 2011-08-10 at 14:00:00: 25=========================================================================================================================================Date & Time (UTC) S Specific Problem MO (Cause/AdditionalInfo)=========================================================================================================================================2011-08-02 00:41:37 M TU Synch Reference Loss of Signal Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 (loss_of_signal)2011-08-02 00:41:37 M TU Synch Reference Loss of Signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 (loss_of_signal)2011-08-02 00:41:37 M Security Level Fault Security=1 (Node Credentials Failure. Security Config Data Failure.)2011-08-02 00:41:37 m Password File Fault Security=1 (configuration_or_customizing_error)2011-08-02 00:41:37 w Gigabit Ethernet Link Redundancy Fault Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 (Gigabit Ethernet Redundancy Fault for link 2. 1)....2011-08-02 00:41:41 M Loss of Signal Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2 (loss_of_signal)2011-08-02 00:44:15 M UtranCell_InternalResourceUnavailable UtranCell=Iub-1095-1 (unavailable)2011-08-02 00:44:15 M UtranCell_InternalResourceUnavailable UtranCell=Iub-1095-2 (unavailable)2011-08-02 00:44:15 M UtranCell_InternalResourceUnavailable UtranCell=Iub-1095-3 (unavailable)2011-08-02 00:49:07 M UtranCell_NbapMessageFailure UtranCell=Iub-1095-1 (nbapCause: hardware_failure)2011-08-02 00:49:15 M UtranCell_NbapMessageFailure UtranCell=Iub-1095-2 (nbapCause: hardware_failure)2011-08-02 00:49:27 M UtranCell_NbapMessageFailure UtranCell=Iub-1095-3 (nbapCause: hardware_failure)>>> Total: 25 Alarms (0 Critical, 22 Major)

RNC11> lgx -m 7

....

RNC11> lgx -m 60h

....

RNC11> lgx

081023-15:17:18 137.58.194.147 7.1d stopfile=/tmp/2733Trying password from ipdatabase file: /home/eanzmagn/moshell_logfiles/ipdatabase...Startdate=19661031.151320, Enddate=20081024.131725...Get /c/logfiles/alarm_event/ALARM_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20081023-151717_2688/alarmLog2733.xml ... OKGet /c/logfiles/systemlog/00000syslog /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20081023-151717_2688/sysLog2733.tmp ... OKGet /c/logfiles/systemlog/00001syslog /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20081023-151717_2688/sysLog2733.tmp ... OKParsing alarmLog.........Done.Parsing sysLog............Done.................


Nr of active alarms on 2011-08-30 at 04:22:46: 25=========================================================================================================================================Date & Time (UTC) S Specific Problem MO (Cause/AdditionalInfo)=========================================================================================================================================2011-08-02 00:41:37 M TU Synch Reference Loss of Signal Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 (loss_of_signal)2011-08-02 00:41:37 M TU Synch Reference Loss of Signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 (loss_of_signal)2011-08-02 00:41:37 M Security Level Fault Security=1 (Node Credentials Failure. Security Config Data Failure.)2011-08-02 00:41:37 m Password File Fault Security=1 (configuration_or_customizing_error)2011-08-02 00:41:37 w Gigabit Ethernet Link Redundancy Fault Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 (Gigabit Ethernet Redundancy Fault for link 2. 1)2011-08-02 00:41:38 w Gigabit Ethernet Link Redundancy Fault Subrack=MS,Slot=24,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 (Gigabit Ethernet Redundancy Fault for link 2. 1).....2011-08-02 00:41:40 M Ethernet Switch Port Fault Subrack=MS,Slot=26,PlugInUnit=1,ExchangeTerminalIp=1,EthernetSwitch=1,EthernetSwitchPort=7 (NO_SFP_MODULE_INSTALLED)2011-08-02 00:41:41 M Loss of Signal Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2 (loss_of_signal)2011-08-02 00:44:15 M UtranCell_InternalResourceUnavailable UtranCell=Iub-1095-1 (unavailable)2011-08-02 00:44:15 M UtranCell_InternalResourceUnavailable UtranCell=Iub-1095-2 (unavailable)2011-08-02 00:44:15 M UtranCell_InternalResourceUnavailable UtranCell=Iub-1095-3 (unavailable)2011-08-02 00:49:07 M UtranCell_NbapMessageFailure UtranCell=Iub-1095-1 (nbapCause: hardware_failure)2011-08-02 00:49:15 M UtranCell_NbapMessageFailure UtranCell=Iub-1095-2 (nbapCause: hardware_failure)2011-08-02 00:49:27 M UtranCell_NbapMessageFailure UtranCell=Iub-1095-3 (nbapCause: hardware_failure)>>> Total: 25 Alarms (0 Critical, 22 Major)

Event log

RNC11> lge Get /c/logfiles/alarm_event/EVENT_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/tmp28585_20060518-174119/eventLog28585.xml ... OK====================================================================================================================Timestamp (UTC) MO-reference Event====================================================================================================================2006-06-07 09:11:36 EV RncFunction=1 RncFunction_NodeRestartCompleted2006-06-07 10:06:24 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged2006-06-07 16:01:19 EV RncFunction=1 RncFunction_NodeRestartCompleted2007-02-15 07:34:05 EV Licensing=1 Licensing_FingerPrintMismatch. Faulty fingerprint in the license key file2007-02-15 07:34:06 EV Licensing=1 Licensing_MultipleLicenses. CXC4010071/3009 has multiple (3) licenses2007-03-29 10:36:01 EV Subrack=MS,Slot=13 SlotNew PIU detected, matches the defined configuration2007-10-11 09:47:05 EV Security=1 Download of Trusted Certificates failed. File Server Access Failure(UserId: ftp RemoteHost: 137.58.194.174 Fault: User authorisation failed. Info: )2007-10-11 09:47:05 EV Security=1 Download of Trusted Certificates failed. File Server Access Failure2007-10-11 09:56:47 EV Security=1 Download of Trusted Certificates completed2007-10-11 10:00:24 EV Security=1 Download of Local AA Database completed2007-12-13 14:59:54 EV UpgradePackage=CXP9012014_R9AM04 UpgradePackage Upgrade executed


5.3 Restart and upgrade history

System log

RNC11> lgsGet /c/logfiles/systemlog/00000syslog /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/tmp28585_20060518-174119/sysLog28585.tmp ... OK======================================================================================================Timestamp (UTC) Sev Description======================================================================================================2006-06-07 08:31:06 INFO Program restart order received for CXC1320784_R50HC05 (jvm.ppc750)2006-06-07 08:42:51 INFO Program restart order received for CXC1320784_R50HC05 (jvm.ppc750)2006-06-07 09:08:11 INFO Node restart order received. Restart rank = COLD_WITH_TEST2006-06-07 09:08:11 CRIT Node down2006-06-07 09:08:19 INFO *** Cls_evlogd_proc restart ***2006-06-07 09:08:36 INFO Node starting2006-06-07 09:08:54 INFO Active CIM ready.2006-06-07 09:09:03 INFO Configuration Version = Rnc_final 2006-06-07 09:09:36 INFO Node operational.

Availability log

RNC11> lgvGet /c/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/tmp28585_20060518-174119/availabilityLog28585.xml ... OK====================================================================================================================Timestamp (UTC) Type Serv Reason Piu Positn Board/Prog AdditionalInfo====================================================================================================================2006-06-06 07:05:48 OTHR PeriodicLogging CV=Rnc_final UP=CXP9012014_R4J072006-06-07 07:05:48 OTHR PeriodicLogging CV=Rnc_final UP=CXP9012014_R4J072006-06-07 09:08:11 NODE OUT ShutdownCommand RankColdWTest ExtRestartRequest2006-06-07 09:08:11 NODE OUT UnOperational RankColdWTest2006-06-07 09:09:06 NODE CppCoreNodeRestart2006-06-07 09:09:43 OTHR CXC1329851 R4J02 is now operational, CAUSE_NODESTART, RpuId=31 (RncLmCenDh)2006-06-07 09:09:03 NODE IN Starting

Board and program crashes from pmd files


RNC11> lgp

/home/eanzmagn/moshell/zpm.linux /home/eanzmagn/moshell_logfiles/logs_moshell/pmdfiles/137.58.194.147/pmd/20070918_122224_c_pmd_1_001600_0x15aa234f.pmd...<cut>.../home/eanzmagn/moshell/zpm.linux /home/eanzmagn/moshell_logfiles/logs_moshell/pmdfiles/137.58.194.147/pmd/20090701_135504_c_pmd_123_001000_0x2db6fb4d.pmd

======================================================================================================Timestamp (UTC) Board Restart======================================================================================================2007-09-18 12:20:04 PMD 0016 GPB_Module Program restart Proc=Ans_aal2ncc2_proc Block=CXC1322419%12_R51LJ02 (Aal2DisNcc12) Err=0x03000113 (kernel) OSE_EUNEXPECTED_EXCEPTION_REGDUMP PMD=20070918_122224_c_pmd_1_001600_0x15aa234f.pmd2007-09-20 19:51:16 PMD 0016 GPB_Module Program restart Proc=Ans_aal2ncc2_proc Block=CXC1322419%12_R51LJ02 (Aal2DisNcc12) Err=0x03000113 (kernel) OSE_EUNEXPECTED_EXCEPTION_REGDUMP PMD=20070920_195138_c_pmd_2_001600_0x15aa2357.pmd2007-10-02 04:01:43 PMD 0016 GPB_Module Board restart rank=Cold Proc=aal5edipri_hp_30142 Block=CXC1320997_R51KF03 (UsaalTerm) Err=0x07000113 (kernel) OSE_EUNEXPECTED_EXCEPTION_REGDUMP PMD=20071002_040406_c_pmd_3_001600_0x15aa237b.pmd2007-10-02 04:01:59 PMD 0016 GPB_Module Board restart rank=Coldwithtest Proc=ose_asf Block=Main Err=0x83000113 (kernel) OSE_EUNEXPECTED_EXCEPTION_REGDUMP PMD=20071002_040408_c_pmd_4_001600_0x15aa237e.pmd2007-10-02 04:03:33 PMD 0016 GPB_Module Board restart rank=Cold Proc=Cs_boardManager_proc Block=Main Err=0x83000113 (kernel)

...<cut>...

2009-03-02 05:13:53 PMD 0010 GPB_Central Program restart Proc=listAal2CpsRc (heap.c:1480) Block=CXC1322418%12_R51TK01 (Aal2CpsRc12) Err=0x00820105 (ose_api) OSE_HEAP_EHEAP_EXHAUSTED PMD=20090302_051423_c_pmd_113_001000_0x2db6fa74.pmd2009-03-02 05:13:54 PMD 0010 GPB_Central Board restart rank=Warm Proc=listAal2CpsRc (heap.c:1480) Block=CXC1322418%12_R51TK01 (Aal2CpsRc12) Err=0x00820105 (ose_api) OSE_HEAP_EHEAP_EXHAUSTED PMD=20090302_051425_c_pmd_114_001000_0x2db6fa76.pmd2009-03-02 07:28:44 PMD 0022SP2 **DC SPM restart Proc=DedicatedChMainPT Block=CXC1329863%3_R10CC03 (RncLmDc) Err=0xE9B8F0EF PMD=20090302_072849_c_pmd_115_002218_0x00000002.pmd2009-05-09 08:34:36 PMD 0010 GPB_Central Program restart Proc=tm (heap.c:1480) Block=CXC1326054_R51SZ01 (target_monit) Err=0x00820105 (ose_api) OSE_HEAP_EHEAP_EXHAUSTED PMD=20090509_083442_c_pmd_116_001000_0x2db6faa0.pmd2009-06-05 09:50:01 PMD 0019SP2 **DC SPM restart Proc=DedicatedChModelPT Block=CXC1329863%3_R10CC03 (RncLmDc) Err=0xE9B8F0EF PMD=20090605_095005_c_pmd_119_001918_0x00000002.pmd2009-07-01 12:45:50 PMD 0011 GPB_Central Board restart rank=Warm Proc=Osa_coreManager_proc (osa_cm_main.c:2936) Block=CXC1320785_R71BC10 (LoaderServer) Err=0xF0F0F0F3 (eri_api) PMD=20090701_124809_c_pmd_120_001100_0x4fb5acbe.pmd. Lost contact with active CM with supa=0xa0000, passive not ready for takeover2009-07-01 13:54:07 PMD 0001 SCB3 Board restart rank=Warm Proc=Cs_boardManager_proc Block=CXC1725310_R71BC08 (BcMpBp) Err=0xB0AD0004 (eri_api) PMD=20090701_135500_c_pmd_121_000100_0xff0001b1.pmd. Board manager restart. Load phase rejected: phase=8, lmid=CXC1321121_R60EJ01, cause=0xffff0101, The ELF header of the load module is corrupt. 2009-07-01 13:54:09 PMD 0000 SCB3 Board restart rank=Warm Proc=Cs_boardManager_proc Block=CXC1725310_R71BC08 (BcMpBp) Err=0xB0AD0004 (eri_api) PMD=20090701_135503_c_pmd_122_000000_0xfdbe819e.pmd. Board manager restart. Load phase rejected: phase=8, lmid=CXC1321121_R60EJ01, cause=0xffff0101, The ELF header of the load module is corrupt.


2009-07-01 13:52:40 PMD 0010 GPB_Central Board restart rank=Warm Proc=Osa_coreManager_proc (osa_cm_main.c:2936) Block=CXC1320785_R71BC10 (LoaderServer) Err=0xF0F0F0F3 (eri_api) PMD=20090701_135504_c_pmd_123_001000_0x2db6fb4d.pmd. Lost contact with active CM with supa=0xb0000, passive not ready for takeover

DUL program errors (LTE only)

(collected from /c/logfiles/troubleshooting/error)

ENB55> lgp

======================================================================================================Timestamp (UTC) Board Info======================================================================================================2010-09-22 10:53:26 ERR 0001 DUL3 LM=CXC1725191%10_R5CD (cellLm) File=20100922_105326_lmcell_serverDisonnectedInd_rnhRrcSigSysInfoC rnhRrcSigSysInfoC(0)@wait4dataReady received unexpected message: timeDistrControl%serverDisconnectedInd data: void

2010-09-22 10:53:27 ERR 0001 DUL3 LM=CXC1725190%10_R5BZ (centralLm) File=20100922_105327_lmcentral_sererDisconnectedInd_omfENodeBFunctionRegisterC omfENodeBFunctionRegisterC(0)@froActive received unexpected messag: eNBFunctionTdcControlP%serverDisconnectedInd data: void2010-09-27 09:37:40 ERR 0001 DUL3 LM=CXC1725190%11_R4G (centralLm) File=20100927_093740_0x9c8_lmcentra_OmfMonImaAdaptorC.cpp !<0x9c8>! Fai led to read eNBId from IMA response in MonSwU, <?xml version="1.0" encoding"UTF- 8" ?><ima version="R1A"><class ldn="ManagedElement=1,ENodeBFunction=1"></class></ima>2010-09-27 09:37:41 ERR 0001 DUL3 LM=CXC1726088%11_R4G (monitorLm) File=20100927_093741_0x9c8_lmmonito_OmfMonImaAdaptorC.cpp !<0x9c8>! Failed to read eNBId from IMA response in MonSwU, <?xml version="1.0" encoding"UTF-8" ?><ima version="R1A"><class ldn="ManagedElement=1,ENodeBFunction=1"></class></ima>2010-09-27 09:37:42 ERR 0001 DUL3 LM=CXC1725191%11_R4H (cellLm) File=20100927_093742_0x9c8_lmcell_OmfMnImaAdaptorC.cpp !<0x9c8>! Failed to read eNBId from IMA response in MonSwU, <?xml version="1.0" encoding="UTF-" ?><ima version="R1A"><class ldn="ManagedElement=1,ENodeBFunction=1"></class></ima>2010-09-29 10:15:30 PMD 0001 DUL3 Program restart Proc=TargetMonitor_router_proc Block=CXC1326054_R74F7 (target_monit) Err=0x00020113 (kernel) PMD=20100929_101731_c_pmd_1_000100_0xff9fbfec.pmd2010-09-30 15:21:40 PMD 0001 DUL3 Program restart Proc=TargetMonitorProc Block=CXC1326054_R74F07 (targt_monit) Err=0x00020113 (kernel) PMD=20100930_152145_c_pmd_2_000100_0xff9fc021.pmd2010-10-01 11:56:09 PMD 0001 DUL3 Program restart Proc=TargetMonitorProc Block=CXC1326054_R74F07 (targt_monit) Err=0x00020113 (kernel) PMD=20101001_115614_c_pmd_3_000100_0xff9fc03c.pmd2010-10-14 11:56:26 ERR 0001 DUL3 LM=CXC1725191%10_R7G (cellLm) File=20101014_115626_lmcell_serverDiscnnectedInd_rnhCellRoC rnhCellRoC(0)@Idle received unexpected message: localCellAdminControlP%serverDisconnectednd data: void2010-10-14 11:56:27 ERR 0001 DUL3 LM=CXC1725191%10_R7G (cellLm) File=20101014_115627_lmcell_serverDiscnnectedInd_uehUeCtxtHandlerC uehUeCtxtHandlerC(0)@LockingResourceManager received unexpected message: uehBearernrhProxyControlP%serverDisconnectedInd data: void2010-10-14 11:56:28 ERR 0001 DUL3 LM=CXC1725190%10_R7G (centralLm) File=20101014_115628_0x438_lmcentra_RnhCellCtrlC.cpp !<0x438>! RnhCellCtrlSwU: Resource layer is down


Usually we combine the three logs (system,availability,pmd). The option “m” is used for merging th e logs

RNC10> lgvspm

Get /c/logfiles/cello/CELLO_AVAILABILITY2_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20060712-165147_934/availabilityLog934.xml ... OKGet /c/logfiles/systemlog/00000syslog /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20060712-165147_934/sysLog934.tmp ... OK

Logging to file: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20060712-165147_934/mergeLog934Parsing availabilityLog...........................................Done.Parsing sysLog..............................................................................................................Done.

Log close: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20060712-165147_934/mergeLog934======================================================================================================Timestamp (UTC) Type Merged Log Entry======================================================================================================//Progkill:2005-12-09 12:48:30 PGM OUT UnOperational MP 001400 CXC1726806_R6AJ18 ProgramFailure (RncLmUe)2005-12-09 12:48:30 INFO Program CXC1726806_R6AJ18 on PIU 0.14 failed (RncLmUe)2005-12-09 12:48:31 PGM IN Starting MP 001400 CXC1726806_R6AJ18 (RncLmUe)2005-12-09 12:48:31 INFO Program CXC1726806_R6AJ18 on PIU 0.14 started (RncLmUe)//program restart action2005-12-09 12:49:36 PGM OUT ShutdownCommand MP 001600 CXC1327928_R71T30 ManualRestart (iphost_gpb_l)2005-12-09 12:49:36 PGM IN Starting MP 001600 CXC1327928_R71T30 (iphost_gpb_l)2005-12-09 12:49:36 INFO Program CXC1327928_R71T30 on PIU 0.16 manual restart ordered (iphost_gpb_l)2005-12-09 12:49:36 INFO Program CXC1327928_R71T30 on PIU 0.16 started (iphost_gpb_l)2005-12-22 08:25:12 INFO *** Cls_evlogd_proc restart ***2005-12-22 08:25:16 INFO Node starting2005-12-22 08:25:19 INFO Active CIM ready.2005-12-22 08:25:20 INFO Configuration Version = empty_cv 2005-12-22 08:27:47 INFO Node restart order received. Restart rank = WARM2005-12-22 08:27:47 CRIT Node down2005-12-22 08:28:16 INFO *** Cls_evlogd_proc restart ***2005-12-22 08:28:21 INFO Node starting2005-12-22 08:28:29 INFO Active CIM ready.//program crash2005-12-22 08:28:31 INFO Crash on 001100 PROCESSOR_BASIC_0xF0F0F0F3 pmdId=0x4fb5abcb.pmd, 05-12-22, 08:06:162005-12-22 08:28:31 PMD 0011 GPB_Central Board restart rank=Warm Proc=Osa_sysmgr_proc (sysmgr.c:5213) Block=CXC1320782_R51TG01 (EqmRes) Err=0xF0F0F0F3 (eri_api) PMD=20081127_215005_c_pmd_110_001100_0x4fb5abcb.pmd. Restart ordered by system manager, node upgrade error, timeout2005-12-22 08:28:31 INFO Configuration Version = STEP35


2005-12-22 08:34:36 INFO Node restart order received. Restart rank = WARM2005-12-22 08:34:36 CRIT Node down2005-12-22 08:34:46 INFO *** Cls_evlogd_proc restart ***2005-12-22 08:34:53 INFO Node starting2005-12-22 08:34:54 INFO Active CIM ready.2005-12-22 08:34:55 INFO Configuration Version = STEP85 2005-12-22 08:42:07 INFO Node restart order received. Restart rank = WARM2005-12-22 08:42:07 CRIT Node down2005-12-22 08:42:17 INFO *** Cls_evlogd_proc restart ***2005-12-22 08:42:26 INFO Node starting2005-12-22 08:42:27 INFO Active CIM ready.2005-12-22 08:42:28 INFO Configuration Version = RADIO_NETWORK_40_RBS_IOV 2005-12-22 09:02:27 ERR MP (smn = 0, apn = 11 ) initially unavailable, do cold restart of board. 2005-12-22 09:02:27 ERR BP (smn = 0, apn = 7 ) initially unavailable, do cold restart of board. 2005-12-22 10:50:56 INFO Node operational. //board restart2005-12-22 10:59:00 INFO MP ( smn = 0, apn = 11 ) restarted by command. Restart rank = WARM 2005-12-22 10:59:01 ERR MP (smn = 0, apn = 11 ) down2005-12-22 10:59:08 INFO MP ( smn = 0, apn = 11 ) starting, administrative state = UNLOCKED2005-12-22 10:59:08 INFO Program CXC1320785_R50HC05 started (loaderserver)2005-12-22 10:59:08 INFO Program CXC1321447_R50HX04 started (GpbBasic)2005-12-22 10:59:08 INFO Program CXC1322812_R50HN01 started (gpb_pqiipatc)2005-12-22 10:59:08 INFO Program CXC1320787_R50HX01 started (SystemManage)2005-12-22 10:59:08 INFO Program CXC1321341_R50HC06 started (sw_installat)2005-12-22 10:59:08 INFO Program CXC1321408_R50HC03 started (spas_resourc)2005-12-22 10:59:08 INFO Program CXC1325792_R50HC06 started (licencemgr)2005-12-22 10:59:08 INFO MP ( smn = 0, apn = 11 ) operational, administrative state = UNLOCKED...<cut>....2006-07-10 13:00:41 NODE OUT ShutdownCommand RankWarm ExtRestartRequest2006-07-10 13:00:41 NODE OUT UnOperational RankWarm//node restart2006-07-10 13:00:41 INFO Node restart order received. Restart rank = WARM2006-07-10 13:00:41 CRIT Node down2006-07-10 13:00:50 INFO *** Cls_evlogd_proc restart ***2006-07-10 13:01:00 INFO Node starting2006-07-10 13:01:03 INFO Active CIM ready.2006-07-10 13:01:06 NODE IN Starting 2006-07-10 13:01:06 OTHR NodeRestarted CV=test UP=CXP9012014_R4J072006-07-10 13:01:06 INFO Configuration Version = test 2006-07-10 13:01:10 NODE IN Operational 2006-07-10 13:01:10 INFO Node operational. 2006-07-10 13:01:16 NODE CppCoreNodeRestart2006-07-10 13:01:58 OTHR CXC1329852 R4J10 is now operational, CAUSE_NODESTART, RpuId=33 (RncLmCenRnh)2006-07-10 13:01:58 NODE IN Operational RNC Node Restart Completed2006-07-10 13:02:00 OTHR PeriodicLogging CV=test UP=CXP9012014_R4J07


2006-07-11 10:34:40 OTHR ConfigVersionCreated CV=Si_CXP9012014_R4J07_060711_1034 UP=CXP9012014_R4J072006-07-11 10:40:15 OTHR ConfigVersionCreated CV=Rb_CXP9012014_R4J07_060711_1040 UP=CXP9012014_R4J072006-07-11 10:40:27 INFO Set upgrade supervision timer to 14400 seconds2006-07-11 10:40:32 INFO Set error escalation to Node Restart

Node downtime and partial outages

RNC11> lgd

101109-05:24:43 137.58.194.147 8.0p stopfile=/tmp/21356Parsing availabilityLog...Done.Parsing sysLog...Done.Parsing upgLog...Done.

============================================================================================================================Timestamp (UTC) Restart Type Configuration Version SwRelease CPP Downtime Appl. Downtime JVM Downtime============================================================================================================================2007-03-11 11:32:18 ManualCold(0) Rb_CXP9012123_R6F01_070311_0858_rpu2 P6.0 30s 2007-03-11 12:34:40 UpgradeFailure Rb_CXP9012123_R6F01_070311_1226 P6.0 20s 2007-03-11 14:11:08 ManualWarm(1) Rb_CXP9012123_R6F01_070311_0858_rpu4 P6.0 22s 2007-03-11 14:37:52 UpgradeNormal SU_CXP9012123_R6F01_070311_1437 P6.0 146s (2m26s) 2007-03-11 14:50:35 ManualWarm(1) Fi_CXP9012123_R6F01_070311_1450 P6.0 226s (3m46s) ....2009-12-09 01:00:09 ManualWarm(0) RNC_P6.1_OK1 P6.1.4-9 330s (5m30s) 43s 313s (5m13s)2009-12-09 01:15:15 ManualRefresh(0) Rb_CXP9012123_R10H%12_090528_1204 P5.0.26-6 379s (6m19s) 201s (3m21s) 238s (3m58s)2009-12-09 01:34:29 ManualColdWtest(0) RNC_P6.1_OK1 P6.1.4-9 467s (7m47s) 163s (2m43s) 425s (7m5s)2009-12-10 01:21:53 ManualWarm(0) RNC_P6.1_OK1 P6.1.4-9 321s (5m21s) 35s 293s (4m53s)2009-12-11 12:23:11 PartialOutage: 66% availability P6.1.4-9 761s (12m41s) 2009-12-11 12:35:52 PartialOutage: 66% availability P6.1.4-9 17s ...2010-10-01 08:17:54 ManualWarm(0) PGU_CXC1728722_R9YC09_101001_101613 P7.1.4-4 319s (5m19s) 154s (2m34s)2010-10-01 08:23:29 ManualCold(8) RNC11_P7.1_OK_AllFeatures P7.1.4-4 328s (5m28s) 151s (2m31s)2010-10-04 07:57:49 ManualCold(3) RNC11_P7.1_OK_AllFeatures P7.1.4-4 328s (5m28s) 39s 136s (2m16s)....

Node uptime since last restart: 96095 seconds (1 days, 2 hours, 41 minutes, 35 seconds)------------------------------------------------------------------------------------------------------Period=1561 days NodeUpgrade NodeManual NodeSpontaneous AllNodeRestarts PartialOutages ------------------------------------------------------------------------------------------------------Number Of outages 100 349 23 472 139


Total downtime 15738s (4h22m) 71653s (19h54m) 8979s (2h29m) 96370s (1d2h) 625316s (7d5h) Downtime per day 10s 46s 6s 62s (1m2s) 401s (6m41s) Downtime per outage 157s (2m37s) 205s (3m25s) 390s (6m30s) 204s (3m24s) 4499s (1h14m)

ERBS54> lgd -m 30

==================================================================================================================================Timestamp (UTC) RestartType/Reason Configuration Version SwRelease CPP Downtime Appl. Downtime JVM Downtime==================================================================================================================================2010-09-23 16:07:44 UpgradeNormal SU_CXP102051%10_R5EH_100923_1607 L11A 2010-09-24 16:35:15 ManualColdWtest(0) R5EH_L11A-PA41_TM3_10MHZ_licnese L11A 20s 64s (1m4s)2010-09-25 21:36:05 Spontaneous selfconfig_autocreated2 L11A.0.1.0 50s2010-09-30 19:20:18 ManualCold(2) R5EH_L11A-PA41_TM3_10MHZ_Relations L11A 19s 116s (1m56s) 74s (1m14s)2010-10-07 20:52:41 ManualWarm(0) R5EH_L11A-PA41_TM3_10MHZ_Relations_1 L11A 11s 133s (2m13s) 62s (1m2s)2010-10-08 13:56:44 UpgradeNormal SU_CXP102051%10_R5FZ_101008_1356 L11A 21s 344s (5m44s) 79s (1m19s)2010-10-08 14:05:30 ManualWarm(0) R5FZ_L11A-PA44_TM3_10MHZ L11A 11s 132s (2m12s) 63s (1m3s)2010-10-11 17:48:53 Partial 100% Cell 17 16 15 (System) L11A 6s 2010-10-11 17:50:24 Partial 79% Cell 17 16 (Manual) L11A 269s (4m29s) 2010-10-11 19:10:55 Partial 43% Cell 16 (System) L11A 150s (2m30s) 2010-10-11 19:16:27 Partial 33% Cell 15 (System) L11A 213s (3m33s) 2010-10-12 18:55:10 Partial 100% Cell 17 (Manual) L11A 0s 2010-10-15 11:48:22 ManualWarm(0) R5FZ_L11A-PA44_TM3_10MHZ L11A 11s 132s (2m12s) 65s (1m5s)2010-10-15 11:50:36 Partial 100% Cell 17 (Manual) L11A 2s 2010-10-19 14:03:38 Partial 68% Cell 17 (System) L11A 34s 2010-10-19 16:15:26 Spontaneous R5FZ_L11A-PA44_TM3_10MHZ L11A 1s 107s (1m47s) 58s2010-10-19 16:17:13 Partial 100% Cell 17 (Manual) L11A 16s 2010-10-19 18:41:51 Spontaneous R5FZ_L11A-PA44_TM3_10MHZ L11A 1s 108s (1m48s) 58s2010-10-19 18:43:54 Partial 92% Cell 17 (Manual) L11A 4s 2010-10-19 23:36:00 Partial 100% Cell 16 (Transmission) L11A 1s 2010-10-20 23:28:07 Spontaneous Pre_EPC_Heavy_Migration_10192010 L11A 9s 106s (1m46s) 75s (1m15s)2010-10-20 23:29:53 Partial 33% Cell 15 (Manual) L11A 1s 2010-10-20 23:31:24 Spontaneous Pre_EPC_Heavy_Migration_10192010 L11A 9s 126s (2m6s) 81s (1m21s)2010-10-20 23:33:33 Partial 100% Cell 15 (Manual) L11A 44s ...2010-12-22 17:53:01 Partial 100% Cell 17 (Transmission) L11A.0.1.0 1s 2010-12-22 18:10:06 Partial 100% Cell 16 (Transmission) L11A.0.1.0 0s 2010-12-28 20:02:58 ManualColdWtest(6) selfconfig_autocreated1 L11A.0.1.0 23s 2010-12-28 20:04:01 Spontaneous selfconfig_autocreated1 L11A.0.1.0 9s 137s (2m17s) 92s (1m32s)2010-12-28 20:07:57 Partial 61% Cell 15 (Manual) L11A.0.1.0 48s

Node uptime since last restart: 3067665 seconds (35 days, 12 hours, 7 minutes, 45 seconds)


------------------------------------------------------------------------------------------------------Period=279 days NodeUpgrade NodeManual NodeSpontaneous AllNodeRestarts PartialOutages ------------------------------------------------------------------------------------------------------Number Of outages 5 31 26 62 92 Total downtime 1065s (17m45s) 1906s (31m46s) 1738s (28m58s) 4709s (1h18m) 23912s (6h38m) Downtime per day 4s 7s 6s 17s 86s (1m26s) Downtime per outage 213s (3m33s) 61s (1m1s) 67s (1m7s) 76s (1m16s) 260s (4m20s)

MGW48> lgd

=================================================================================================================================Timestamp (UTC) Restart Type Configuration Version SwRelease CPP Downtime Appl. Downtime JVM Downtime=================================================================================================================================...<cut>...2009-11-24 10:57:26 ManualWarm R6_LSV08_CM55_BC3024_ET_SYS_PNP R6.0 31s 125s (2m5s)2009-11-24 11:11:23 ManualCold R6_LSV08_CM48_BC3024_NW3_MPP_black5 R6.0 62s (1m2s) 83s (1m23s) 198s (3m18s)2009-11-24 11:21:07 ManualCold R6_LSV08_CM48_BC3024_NW3_MPP_black5 R6.0 70s (1m10s) 83s (1m23s) 185s (3m5s)2009-11-24 11:55:31 ManualWarm R6_LSV08_CM55_BC3024_ET_SYS_PNP R6.0 345s (5m45s) 2009-11-24 12:01:22 ManualWarm SU_CXP9013522%2_R8A70_091124_1200 R6.0 46s 167s (2m47s)2009-11-24 12:24:35 ManualWarm R6_LSV08_CM55_BC3024_ET_SYS_PNP2 R6.0 27s 116s (1m56s)2009-11-24 12:29:16 ManualCold R6_LSV08_CM48_BC3024_NW3_MPP_black5 R6.0 107s (1m47s) 10593s (2h56m)2009-11-24 15:46:42 UpgradeNormal SU_CXP9013522%2_R8A70_091124_1545 R6.0 56s 196s (3m16s)2009-11-24 16:09:21 ManualWarm R6_LSV08_CM55_BC3024_ET_SYS_PNP2 R6.0 222s (3m42s) 309s (5m9s)2009-11-24 17:26:55 UpgradeNormal SU_CXP9013522%2_R8A70_091124_1726 R6.0 50s 188s (3m8s)2009-11-25 10:47:02 ManualWarm R6_LSV08_CM51_BC3002_NW0 R6.0 23s 2256s (37m36s) 104s (1m44s)2009-11-25 11:38:44 ManualWarm R6_LSV08_CM51_BC3024_NW0 R6.0 25s 113s (1m53s)2009-11-25 11:50:17 ManualWarm R6_LSV08_CM51_BC3024_NW0_MPC_EXP R6.0 24s 109s (1m49s)2009-11-25 11:54:57 ManualWarm R5_CNP_R5.1.4.0B_BC3002_NW0 CNPR5140B 417s (6m57s) 364s (6m4s)2009-11-25 12:36:44 ManualWarm R6_LSV08_CM51_BC3002_NW0 R6.0 2982s (49m42s) 1837s (30m37s)2009-11-25 14:02:50 ManualWarm R5_CNP_R5.1.5.0_B_BC3024_ET_NW4 R5.1 690s (11m30s) 751s (12m31s)2009-11-25 15:40:58 UpgradeNormal SU_CXP9013522%2_R8A66_E_091125_1540 R6.0 55s 147s (2m27s) 506s (8m26s)2009-11-26 06:29:00 ManualWarm R6_LSV08_CM55_BC3002_NW0 R6.0 31s 148s (2m28s)2009-11-26 07:24:30 ManualWarm R6_LSV08_CM55_BC3024_NW0_MPC_EX R6.0 25s 133s (2m13s)

Node uptime since last restart: 4873457 seconds (56 days, 9 hours, 44 minutes, 17 seconds)------------------------------------------------------------------------------------------------------Period=619 days NodeUpgrade NodeManual NodeSpontaneous AllNodeRestarts PartialOutages ------------------------------------------------------------------------------------------------------Number Of outages 43 142 0 185 0 Total downtime 62066s (17h14m) 60124s (16h42m) 0s 122190s (1d9h) 0s Downtime per day 100s (1m40s) 97s (1m37s) 0s 197s (3m17s) 0s Downtime per outage 1443s (24m3s) 423s (7m3s) 0s 660s (11m0s) 0s

Upgrade historyFinn Magnusson 2011-07-10 rev PA36 234/527)

RNC11> lgu

======================================================================================================Timestamp (UTC) Description======================================================================================================2005-08-25 09:30:56 UP Start Action - Upgrade Product number: CXP9012014 Revision: R1T052005-08-25 09:30:56 UP Sending AVC Event - aProgressCounter: 02005-08-25 09:30:56 UP Sending AVC Event - aProgressTotal: 02005-08-25 09:30:56 UP End Action - Upgrade, upgrade initiated(Action ID: 93056628)2005-08-25 09:30:57 UP Sending AVC Event - progressHeader: Variant of upgrade action initiated2005-08-25 09:31:00 UP Sending AVC Event - aProgressTotal: 102005-08-25 09:31:00 UP Sending AVC Event - progressHeader: The verification phase has been initiated2005-08-25 09:31:00 UP Sending AVC Event - progressHeader: Verifying that the used PIUs in the node are supported according to the Upgrade Control File2005-08-25 09:31:02 UP Sending AVC Event - progressHeader: Verifying that the upgrade window defined in the Upgrade Control File allows an upgrade2005-08-25 09:31:03 UP Sending AVC Event - progressHeader: Verifying that it is possible to create the required number of CV's during the upVgrade phase2005-08-25 09:31:04 UP Sending AVC Event - progressHeader: Verifying checksum for all load modules that has a checksum value defined in the Upgrade Control File2005-08-25 09:31:50 UP Sending AVC Event - progressHeader: Verifying that Plug In Units(PIUs)on the node are not faulty before the upgrade is initiated2005-08-25 09:31:50 UP Sending AVC Event - progressHeader: The verification phase is finished2005-08-25 09:31:50 UP Create an upgrade rollback CV.2005-08-25 09:31:58 UP CV 'Rb_CXP9012014_R1T05_050825_0931' has been created.2005-08-25 09:32:06 UP Sending AVC Event - state: Upgrade executing2005-08-25 09:32:07 UP Sending AVC Event - progressHeader: The upgrade phase is initiated and the system state is set to upgrade mode2005-08-25 09:32:07 UP The upgrade supervision timer is set to 14400 seconds and started.2005-08-25 09:32:09 UP Confirmation deadline timer data: 240 minutes.2005-08-25 09:32:11 UP Following slots shall tolerate errors during an upgrade(pointed out by repertoire names)theTolerateErrorsSlotsForRepertoireNames: [ManagedElement=1,Subrack=MS,Slot=14, ManagedElement=1,Subrack=MS,Slot=15, ManagedElement=1,Subrack=MS,Slot=16, ManagedElement=1,Subrack=ES-1,Slot=12, ManagedElement=1,Subrack=ES-1,Slot=13, ManagedElement=1,Subrack=ES-1,Slot=14, ManagedElement=1,Subrack=ES-1,Slot=15, ManagedElement=1,Subrack=ES-1,Slot=16, ManagedElement=1,Subrack=ES-1,Slot=17, ManagedElement=1,Subrack=MS,Slot=19, ManagedElement=1,Subrack=MS,Slot=22, ManagedElement=1,Subrack=ES-1,Slot=5, ManagedElement=1,Subrack=ES-1,Slot=8, ManagedElement=1,Subrack=ES-1,Slot=11, ManagedElement=1,Subrack=MS,Slot=20, ManagedElement=1,Subrack=MS,Slot=23, ManagedElement=1,Subrack=ES-1,Slot=6, ManagedElement=1,Subrack=ES-1,Slot=9, ManagedElement=1,Subrack=ES-1,Slot=18, ManagedElement=1,Subrack=ES-1,Slot=20, ManagedElement=1,Subrack=ES-1,Slot=21, ManagedElement=1,Subrack=ES-1,Slot=22, ManagedElement=1,Subrack=ES-1,Slot=23, ManagedElement=1,Subrack=MS,Slot=21, ManagedElement=1,Subrack=ES-1,Slot=7, ManagedElement=1,Subrack=ES-1,Slot=10, ManagedElement=1,Subrack=ES-1,Slot=19, ManagedElement=1,Subrack=ES-1,Slot=24] theRepertoireNamesForTolerateErrors: [RNC_Module_MP, CPP_SPB]2005-08-25 09:32:12 UP The upgrade sequence defined in the Upgrade Control File(UCF)is parsed. Upgrade sequence to parse: YAD_TO_YAD_label Previously executed step:2005-08-25 09:32:13 UP Sending AVC Event - aProgressCounter: 1


5.4 Command history

SHELL_AUDIT_TRAIL, a log of all OSE shell commands

RNC11> lglGet /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/tmp28585_20060518-174119/audittrailLog28585.xml ... OK====================================================================================================================Timestamp (UTC) User Terminal Event Info====================================================================================================================2006-05-15 03:12:05 COLI kalle Coli access granted bp.lnh/001000!/telnet_137.58.194.175:36374 shell2006-05-15 03:12:05 COLI kalle Coli access granted bp.lnh/001000!/telnet_137.58.194.175:36374 pboot show parameters2006-05-15 03:12:06 COLI kalle Coli access granted bp.lnh/001000!/telnet_137.58.194.175:36374 pglist2006-05-15 03:12:06 COLI kalle Coli access granted bp.lnh/001000!/telnet_137.58.194.175:36374 ps

CORBA_AUDIT_TRAIL, stores a log of all set/create/action/delete operations on the MOs

Standard format

RNC49> lgo

Get /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/tmp28585_20060518-174119/audit_trailLog28585.xml ... OK======================================================================================================Timestamp (UTC) Description======================================================================================================2009-06-17 12:20:13 MO-A CRE SwManagement=1,UpgradePackage=CXP9013831_R9LD01 2009-06-17 12:20:29 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 nonBlockingInstall 2009-06-17 12:54:37 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 rebootNodeUpgrade 2009-06-17 13:26:04 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 confirmUpgrade 2009-06-18 09:18:53 MO-A ACT SwManagement=1,ConfigurationVersion=1 setStartable STP49_P7MD2009-06-18 09:18:55 MO-A ACT ManagedElement=1 manualRestart 0|0|UPGTOOL2009-06-18 09:30:00 MO-A DEL SwManagement=1,UpgradePackage=Virtual_1_of_CXP9013831_R9LD01 2009-06-18 09:33:00 MO-A CRE SwManagement=1,UpgradePackage=CXP9013831_R9LD01 2009-06-18 09:33:15 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 nonBlockingInstall 2009-06-18 10:11:51 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 rebootNodeUpgrade 2009-06-18 10:45:52 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 confirmUpgrade 2009-07-01 15:11:27 MO-A SET SystemFunctions=1,Licensing=1,RncCapacity=FachDchHsUsers operatorCapacityLimit noLimit=0|value=102009-07-01 15:15:27 MO-A SET SystemFunctions=1,Licensing=1,RncCapacity=FachDchHsUsers operatorCapacityLimit value=10|noLimit=1


2009-07-04 07:53:07 MO-A ACT SwManagement=1,ConfigurationVersion=1 create DCG_20090704_095241_duringfault|DCG_20090704_095241_duringfault|5|moshelluser|CV taken during fault2009-07-04 07:53:12 MO-A ACT SwManagement=1,ConfigurationVersion=1 putToFtpServer DCG_20090704_095241_duringfault|/d/usr|STP49_DCG_20090704_095241_duringfault.zip|127.0.0.1|moshelluser|*****2009-07-04 07:54:47 MO-A ACT SwManagement=1,ConfigurationVersion=1 delete DCG_20090704_095241_duringfault2009-07-04 07:56:03 MO-A ACT SwManagement=1,ConfigurationVersion=1 putToFtpServer SU_CXP9013831_R9LD01_090618_1033|/d/usr|STP49_SU_CXP9013831_R9LD01_090618_1033.zip|127.0.0.1|moshelluser|*****2009-07-09 10:27:36 MO-A SET SystemFunctions=1,Licensing=1,RncFeature=TransmitDiversity featureState 1

In trun/emas format

RNC49> lgq

//2009-06-18 09:33:00 UnknownCREATE ( parent "ManagedElement=1,SwManagement=1" identity CXP9013831_R9LD01 moType UpgradePackage exception none nrOfAttributes 4 ftpServerIpAddress String "137.58.194.174" upFilePathOnFtpServer String "/TCM/UP/WIONA_FP/CXP9013831_R9LD01/CXP9013831_R9LD01.xml" user String "ftp" password String "*****" )//2009-06-18 09:33:15 UnknownACTION ( actionName nonBlockingInstall mo "ManagedElement=1,SwManagement=1,UpgradePackage=CXP9013831_R9LD01" exception none nrOfParameters 0 returnValue ignore )//2009-06-18 10:11:51 UnknownACTION ( actionName rebootNodeUpgrade mo "ManagedElement=1,SwManagement=1,UpgradePackage=CXP9013831_R9LD01" exception none nrOfParameters 0 returnValue ignore )//2009-06-18 10:45:52 UnknownACTION ( actionName confirmUpgrade mo "ManagedElement=1,SwManagement=1,UpgradePackage=CXP9013831_R9LD01" exception none nrOfParameters 0 returnValue none )//2009-07-01 15:11:27 UnknownSET ( mo "ManagedElement=1,SystemFunctions=1,Licensing=1,RncCapacity=FachDchHsUsers" exception none operatorCapacityLimit Struct nrOfElements 2 noLimit Integer 0 value Integer 10 )//2009-07-01 15:15:27 UnknownSET ( mo "ManagedElement=1,SystemFunctions=1,Licensing=1,RncCapacity=FachDchHsUsers" exception none operatorCapacityLimit Struct nrOfElements 2 value Integer 10 noLimit Integer 1 )//2009-07-04 07:53:07 UnknownACTION ( actionName create mo "ManagedElement=1,SwManagement=1,ConfigurationVersion=1" exception none nrOfParameters 5 String "DCG_20090704_095241_duringfault" String "DCG_20090704_095241_duringfault" Integer 5 String "moshelluser" String "CV taken during fault" returnValue none )//2009-07-04 07:53:12 UnknownACTION ( actionName putToFtpServer mo "ManagedElement=1,SwManagement=1,ConfigurationVersion=1" exception none nrOfParameters 6 String "DCG_20090704_095241_duringfault" String "/d/usr" String "STP49_DCG_20090704_095241_duringfault.zip" String "127.0.0.1" String "moshelluser" String "*****" returnValue ignore )//2009-07-04 07:54:47 UnknownACTION ( actionName delete mo "ManagedElement=1,SwManagement=1,ConfigurationVersion=1" exception none nrOfParameters 1 String "DCG_20090704_095241_duringfault" returnValue none )//2009-07-04 07:56:03 Unknown


ACTION ( actionName putToFtpServer mo "ManagedElement=1,SwManagement=1,ConfigurationVersion=1" exception none nrOfParameters 6 String "SU_CXP9013831_R9LD01_090618_1033" String "/d/usr" String "STP49_SU_CXP9013831_R9LD01_090618_1033.zip" String "127.0.0.1" String "moshelluser" String "*****" returnValue ignore )//2009-07-09 10:27:36 UnknownSET ( mo "ManagedElement=1,SystemFunctions=1,Licensing=1,RncFeature=TransmitDiversity" exception none featureState Integer 1 )

AMOS command log:

--> Shows all moshell commands executed on a particular node by all users

RNC11> lgn -m 3

Startdate=20091130.084030, Enddate=20091204.084030

======================================================================================================Timestamp (Local) User Node PID Command======================================================================================================2009-12-02 19:50:04 MOS nmsadm 137.58.194.147 21963 StartSession, interactive, ID=20091202-194947_21963, CWD=/home/nmsadm, WS=SunOS atrcus422, ver=7.1y2009-12-02 19:50:04 MOS nmsadm 137.58.194.147 21963 pr2009-12-02 19:50:17 MOS nmsadm 137.58.194.147 21963 fget 0 userlabel2009-12-02 19:50:21 MOS nmsadm 137.58.194.147 21963 q2009-12-03 08:38:27 MOS design01 137.58.194.147 6567 StartSession, interactive, ID=20091203-083809_6567, CWD=/home/design01, WS=SunOS atrcus422, ver=7.1y2009-12-03 08:38:30 MOS design01 137.58.194.147 6567 vii2009-12-03 08:38:39 MOS design01 137.58.194.147 6567 get 02009-12-03 08:39:05 MOS design01 137.58.194.147 6567 set 0 userlabel RNC112009-12-03 08:39:12 MOS design01 137.58.194.147 6567 q2009-12-03 08:40:14 MOS design01 137.58.194.147 11902 StartSession, interactive, ID=20091203-084001_11902, CWD=/home/design01, WS=SunOS atrcus422, ver=7.1y2009-12-03 08:40:14 MOS design01 137.58.194.147 11902 lgn -m

--> Shows all moshell commands executed on any node by all users

moscommanddir

OFFLINE> lgn -m 3 -n .

Startdate=20091130.084030, Enddate=20091204.084030


======================================================================================================Timestamp (Local) User Node PID Command======================================================================================================2009-12-02 19:50:04 MOS nmsadm 137.58.194.147 21963 StartSession, interactive, ID=20091202-194947_21963, CWD=/home/nmsadm, WS=SunOS atrcus422, ver=7.1y2009-12-02 19:50:04 MOS nmsadm 137.58.194.147 21963 pr2009-12-02 19:50:17 MOS nmsadm 137.58.194.147 21963 fget 0 userlabel2009-12-02 19:50:21 MOS nmsadm 137.58.194.147 21963 q2009-12-02 20:24:16 MOS eanzmagn 137.58.194.149 7029 StartSession, interactive, ID=20091202-202410_7029, CWD=/home/eanzmagn, WS=Linux ws7180, ver=7.1z2009-12-02 20:24:16 MOS eanzmagn 137.58.194.149 7029 pr2009-12-02 20:24:38 MOS eanzmagn 137.58.194.149 7029 cr rnc11,rncfunction=1,iublink=992009-12-02 20:24:43 MOS eanzmagn 137.58.194.149 7029 cr me=rnc11,rncfunction=1,iublink=992009-12-02 20:24:49 MOS eanzmagn 137.58.194.149 7029 cr me=rnc11,rncfunction=1,iublink=9992009-12-02 20:25:06 MOS eanzmagn 137.58.194.149 7029 get 462009-12-02 20:25:12 MOS eanzmagn 137.58.194.149 7029 lt roo2009-12-02 20:25:14 MOS eanzmagn 137.58.194.149 7029 lt root2009-12-02 20:25:16 MOS eanzmagn 137.58.194.149 7029 pr2009-12-02 20:25:19 MOS eanzmagn 137.58.194.149 7029 cr me=rnc11,rncfunction=1,iublink=9992009-12-02 20:25:24 MOS eanzmagn 137.58.194.149 7029 cr me=rnc11,rncfunction=1,iublink=9992009-12-02 20:25:29 MOS eanzmagn 137.58.194.149 7029 cr me=rnc11,rncfunction=1,iublink=9992009-12-02 20:30:55 MOS eanzmagn 137.58.194.149 7029 q2009-12-02 20:31:51 MOS eanzmagn 137.58.194.149 7446 StartSession, interactive, ID=20091202-203148_7446, CWD=/home/eanzmagn, WS=Linux ws7180, ver=7.1z2009-12-02 20:31:53 MOS eanzmagn 137.58.194.149 7446 pr2009-12-02 20:32:16 MOS eanzmagn 137.58.194.149 7446 cr me=rnc11,transportnetwork=1,iublink=992009-12-02 20:32:44 MOS eanzmagn 137.58.194.149 7446 cr me=rnc11,transportnetwork=1,iublink=99992009-12-02 20:32:57 MOS eanzmagn 137.58.194.149 7446 q2009-12-03 08:38:27 MOS design01 137.58.194.147 6567 StartSession, interactive, ID=20091203-083809_6567, CWD=/home/design01, WS=SunOS atrcus422, ver=7.1y2009-12-03 08:38:30 MOS design01 137.58.194.147 6567 vii2009-12-03 08:38:39 MOS design01 137.58.194.147 6567 get 02009-12-03 08:39:05 MOS design01 137.58.194.147 6567 set 0 userlabel RNC112009-12-03 08:39:12 MOS design01 137.58.194.147 6567 q2009-12-03 08:40:14 MOS design01 137.58.194.147 11902 StartSession, interactive, ID=20091203-084001_11902, CWD=/home/design01, WS=SunOS atrcus422, ver=7.1y2009-12-03 08:40:14 MOS design01 137.58.194.147 11902 lgn -m

SECURITY_EVENT, a log of all logins/logouts


History of all O&M connection establishments and release

RNC11> lgyGet /c/logfiles/security/CELLO_SECURITYEVENT_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/tmp28585_20060518-174119/securityLog28585.xml ... OK====================================================================================================================Timestamp (UTC) User Terminal Event Info====================================================================================================================2010-01-22 14:57:05 SEC TCPConnectionClosed from /134.138.128.128:46319 to localhost:568362010-01-22 14:57:26 SEC TCPConnectionOpened from 134.138.128.128:36784 to localhost:568362010-01-22 14:57:30 SEC SSLSessionCreated from 134.138.128.128:36784 to localhost:568362010-01-22 14:57:31 SEC TCPConnectionClosed from /134.138.128.128:36784 to localhost:568362010-01-22 14:58:02 SEC TCPConnectionOpened from 134.138.128.128:40537 to localhost:56836

Snapshot of all O&M connections currently established to this node

RNC11> lgw

100121-16:54:44 137.58.194.147 8.0 stopfile=/tmp/13373Startdate=19661031.151320, Enddate=20100122.155447Parsing sysLog...................Done.Parsing securityLog...Done.................Nr of active O&M connections on 2010-01-21 at 15:54:55: 19================================================================================================ConnType Origin ActiveSince Duration================================================================================================Corba:56834 150.132.34.224:52573 2010-01-21 12:20:17 12878s (3h34m38s)Corba:56834 150.132.34.239:33515 2010-01-21 13:52:26 7349s (2h02m29s)Corba:56834 150.132.92.194:54718 2010-01-21 13:57:11 7064s (1h57m44s)Corba:56834 150.132.34.239:35799 2010-01-21 14:13:05 6110s (1h41m50s)Corba:56834 150.132.83.6:59620 2010-01-21 14:40:16 4479s (1h14m39s)Corba:56834 150.132.34.239:38789 2010-01-21 14:49:53 3902s (1h05m02s)Corba:56834 150.132.83.8:51635 2010-01-21 14:52:08 3767s (1h02m47s)Corba:56834 150.132.34.224:56141 2010-01-21 15:02:31 3144s (52m24s)Corba:56834 150.132.83.8:49204 2010-01-21 15:07:17 2858s (47m38s)Corba:56834 150.132.34.239:42245 2010-01-21 15:12:34 2541s (42m21s)Corba:56834 150.132.34.224:56436 2010-01-21 15:13:18 2497s (41m37s)Corba:56834 150.132.34.226:55994 2010-01-21 15:27:57 1618s (26m58s)


Corba:56834 150.132.34.226:56006 2010-01-21 15:28:12 1603s (26m43s)Ftp 147.214.80.52:34254 Ssh 137.58.218.221:39452 Ssh 147.214.195.156:59908 Telnet 137.58.190.61:43136 Telnet 147.214.195.156:41188 Telnet 147.214.195.156:50717 >>> Total: 19 O&M connections (13 Corba, 2 Ssh, 3 Telnet, 1 Ftp)

Snapshot of all moshell sessions currently running on this workstation

**:ws1048@~> ./moshell/pstool list PID PPID USER nCh %CPU %MEM RSS VSZ ELAPSED COMMAND----------------------------------------------------------------------------------------29653 29624 eanzmagn 5 0.0 4.7 88.5M 110.5M 12:06 /home/eanzmagn/moshell/moshell rnc11 29362 23066 eanzmagn 7 2.6 6.1 115.7M 163.7M 16:35 /home/eanzmagn/moshell/moshell rnc12 25324 7573 eanzmagn 7 0.0 6.3 116.5M 165.4M 01:28:51 /home/eanzmagn/moshell/moshell rnc31 23948 17309 eanzmagn 3 0.0 2.2 40.5M 43.2M 01:42:16 /home/eanzmagn/moshell/moshell rbs01 23728 23066 erafima 5 0.0 4.6 87.1M 110.5M 01:45:41 /home/eanzmagn/moshell/moshell rnc44 23203 9122 erafima 5 0.0 4.8 91.3M 113.8M 01:50:15 /home/eanzmagn/moshell/moshell rnc11 ----------------------------------------------------------------------------------------Moshell Sessions: 6, Spawned Processes: 32

Snapshot of all O&M connections to this node on a particular date

RNC11> lgw -s 20100121.1200

100121-16:55:45 137.58.194.147 8.0 stopfile=/tmp/13373Startdate=19661031.151320, Enddate=20100121.120000Parsing sysLog...................Done.Parsing securityLog...Done.................Nr of active Corba connections on 2010-01-21 at 12:00:00: 2================================================================================================ConnType Origin ActiveSince Duration================================================================================================Corba:56834 150.132.83.15:64628 2010-01-21 11:50:28 572s (09m32s)Corba:56834 150.132.92.194:40485 2010-01-21 11:56:53 187s (03m07s)>>> Total: 2 Corba connections


5.5 Format options

lga –m 1 ---> last day

lgae -m 3h ---> last 3 hrs

lgo -m 5m ---> last 5 minutes

lgs -m 5 –p 3 ---> starting from 5 days ago and 3 days forward

lgs –s 20080220.0700 –e 20080221.1400 --> between these two timestamps

Merging/combining output from several logs

RNC11> lgaegopsuvym -m 1

Startdate=20110314.142322, Enddate=20110316.142322Parsing alarmLog...Done.Parsing eventLog...Done.Parsing availabilityLog...Done.Parsing sysLog...Done.Parsing upgLog...Done.Parsing audit_trailLog...Done.Parsing securityLog...Done.Parsing llog...Done.Parsing pmdzpm...Done.======================================================================================================Timestamp (UTC) Type Merged Log Entry======================================================================================================2011-03-14 21:12:05 OTHR PeriodicLogging CV=RNC11_P7.1_OK_AllFeatures UP=CXP9013831_R9YC/6 P7.1.4-4 (CPP_7.0.3.10.1)2011-03-15 01:16:54 SEC TCPConnectionOpened from 147.214.104.66:36317 to localhost:568342011-03-15 01:33:08 SEC TCPConnectionOpened from 137.58.204.246:44353 to localhost:568342011-03-15 01:33:24 SEC labuser Login failure /sshd_handler_137.58.204.246:44425 2011-03-15 01:33:24 SEC labuser File access authorization failure /sshd_handler_137.58.204.246:44425 User or session does not exist2011-03-15 01:33:24 SEC Failed password for labuser from 137.58.204.246 port 44425 ssh2, client identifier 'SSH-2.0-OpenSSH_5.6' 2011-03-15 01:33:27 SEC labuser Login failure /sshd_handler_137.58.204.246:44438 2011-03-15 01:33:27 SEC labuser File access authorization failure /sshd_handler_137.58.204.246:44438 User or session does not exist2011-03-15 01:33:27 SEC Failed password for labuser from 137.58.204.246 port 44438 ssh2, client identifier 'SSH-2.0-OpenSSH_5.6'


2011-03-15 02:45:39 SEC moshelluser Login failure /telnet_150.236.180.55:55564 2011-03-15 02:47:48 SEC TCPConnectionClosed from /134.138.136.111:45926 to localhost:568342011-03-15 04:41:54 SEC TCPConnectionOpened from 134.138.136.111:49566 to localhost:568342011-03-15 04:52:19 SEC TCPConnectionOpened from 134.138.136.111:49742 to localhost:568342011-03-15 04:57:42 SEC TCPConnectionOpened from 134.138.136.111:49849 to localhost:568342011-03-15 05:02:43 UP Start Action - Delete Configuration version name: test2011-03-15 05:02:50 UP End Action - Delete2011-03-15 05:02:52 MO-A ACT SwManagement=1,ConfigurationVersion=1 delete test2011-03-15 05:03:04 UP Start Action - Delete Configuration version name: test22011-03-15 05:03:14 UP End Action - Delete2011-03-15 05:03:18 MO-A ACT SwManagement=1,ConfigurationVersion=1 delete test22011-03-15 05:14:06 SEC TCPConnectionClosed from /134.138.136.111:47699 to localhost:568342011-03-15 05:18:12 SEC TCPConnectionClosed from /147.214.104.66:38286 to localhost:568342011-03-15 05:18:51 SEC TCPConnectionClosed from /134.138.136.111:47717 to localhost:568342011-03-15 06:42:05 SEC TCPConnectionOpened from 134.138.136.111:50734 to localhost:568342011-03-15 06:44:20 EV Subrack=MS,Slot=5,PlugInUnit=1 PIU restarted2011-03-15 06:44:20 PIU OUT ShutdownCommand BP 000500 TU2 RankWarm ManualReconfiguration 02011-03-15 06:44:20 INFO BP ( smn = 0, apn = 5 ) manual restart. Reason: Planned reconfiguration. Restart rank = warm. Info text = 0 2011-03-15 06:44:20 MO-A ACT Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 manualRestart 0|0|02011-03-15 06:44:20 LLOG 0005 TUB2 Board restart rank=Warm Proc=Cs_boardManager_proc Err=0xB0AD0000 (eri_api). Board manager restart. Restart ordered by system manager2011-03-15 06:44:22 AL * TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 06:44:22 PIU OUT UnOperational BP 000500 TU2 ExtRestartRequest2011-03-15 06:44:22 ERR BP (smn = 0, apn = 5 ) down2011-03-15 06:44:23 PIU IN Starting BP 000500 TU2 RankWarm2011-03-15 06:44:23 PIU IN Operational BP 000500 TU2 2011-03-15 06:44:23 INFO BP ( smn = 0, apn = 5 ) starting, administrative state = UNLOCKED2011-03-15 06:44:23 INFO Program CXC1725156_R71CD03 on PIU 0.5 started (Ebos)2011-03-15 06:44:23 INFO Program CXC1725467_R71AZ03 on PIU 0.5 started (I2cOpb)2011-03-15 06:44:23 INFO Program CXC1725310_R71CD04 on PIU 0.5 started (BcMpBp)2011-03-15 06:44:23 INFO Program CXC1725501_R71AZ03 on PIU 0.5 started (BcDbm2)2011-03-15 06:44:23 INFO Program CXC1725385_R71CD01 on PIU 0.5 started (IcsDbm2)2011-03-15 06:44:23 INFO Program CXC1725509_R71AZ01 on PIU 0.5 started (SpasBasSpic)2011-03-15 06:44:23 INFO Program CXC1721176_R71CD03 on PIU 0.5 started (PmAgent)2011-03-15 06:44:23 INFO Program CXC1321121_R71AZ01 on PIU 0.5 started (NssSyciBp)2011-03-15 06:44:23 INFO Program CXC1321794_R71AU01 on PIU 0.5 started (Aal0TuBp)2011-03-15 06:44:23 INFO Program CXC1323942_R71AZ02 on PIU 0.5 started (NssTu2)2011-03-15 06:44:23 INFO Program CXC1728701_R9YC05 on PIU 0.5 started (RncLmGps)2011-03-15 06:44:23 INFO Program CXC1728703_R9YC05 on PIU 0.5 started (RncLmTas)2011-03-15 06:44:23 INFO BP ( smn = 0, apn = 5 ) operational, administrative state = UNLOCKED2011-03-15 06:44:26 AL M TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 06:44:30 AL * TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 06:44:30 AL M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 06:45:30 SEC TCPConnectionOpened from 134.138.136.111:50807 to localhost:568342011-03-15 06:52:24 SEC TCPConnectionClosed from /134.138.136.111:50658 to localhost:56834


2011-03-15 06:53:21 PGM OUT UnOperational MP 001400 CXC1728722_R9YC07 ProgramFailure (RncLmUe)2011-03-15 06:53:21 PGM IN Starting MP 001400 CXC1728722_R9YC07 (RncLmUe)2011-03-15 06:53:21 ERR Program CXC1728722_R9YC07 on PIU 0.14 failed (RncLmUe)2011-03-15 06:53:21 INFO Program CXC1728722_R9YC07 on PIU 0.14 started (RncLmUe)2011-03-15 06:53:52 SEC TCPConnectionOpened from 134.138.136.111:51204 to localhost:568342011-03-15 07:01:12 SEC TCPConnectionOpened from 134.138.136.111:51473 to localhost:568342011-03-15 07:32:15 SEC TCPConnectionOpened from 150.236.180.68:65067 to localhost:568342011-03-15 07:39:05 EV Subrack=MS,Slot=5,PlugInUnit=1 PIU restarted2011-03-15 07:39:05 PIU OUT ShutdownCommand BP 000500 TU2 RankWarm ManualReconfiguration 02011-03-15 07:39:05 INFO BP ( smn = 0, apn = 5 ) manual restart. Reason: Planned reconfiguration. Restart rank = warm. Info text = 0 2011-03-15 07:39:05 MO-A ACT Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 manualRestart 0|0|02011-03-15 07:39:05 LLOG 0005 TUB2 Board restart rank=Warm Proc=Cs_boardManager_proc Err=0xB0AD0000 (eri_api). Board manager restart. Restart ordered by system manager2011-03-15 07:39:09 AL * TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 07:39:09 PIU OUT UnOperational BP 000500 TU2 ExtRestartRequest2011-03-15 07:39:09 PIU IN Starting BP 000500 TU2 RankWarm2011-03-15 07:39:09 ERR BP (smn = 0, apn = 5 ) down2011-03-15 07:39:09 INFO BP ( smn = 0, apn = 5 ) starting, administrative state = UNLOCKED2011-03-15 07:39:09 INFO Program CXC1725156_R71CD03 on PIU 0.5 started (Ebos)2011-03-15 07:39:09 INFO Program CXC1725467_R71AZ03 on PIU 0.5 started (I2cOpb)2011-03-15 07:39:09 INFO Program CXC1725310_R71CD04 on PIU 0.5 started (BcMpBp)2011-03-15 07:39:09 INFO Program CXC1725501_R71AZ03 on PIU 0.5 started (BcDbm2)2011-03-15 07:39:09 INFO Program CXC1725385_R71CD01 on PIU 0.5 started (IcsDbm2)2011-03-15 07:39:09 INFO Program CXC1725509_R71AZ01 on PIU 0.5 started (SpasBasSpic)2011-03-15 07:39:09 INFO Program CXC1721176_R71CD03 on PIU 0.5 started (PmAgent)2011-03-15 07:39:09 INFO Program CXC1321121_R71AZ01 on PIU 0.5 started (NssSyciBp)2011-03-15 07:39:09 INFO Program CXC1321794_R71AU01 on PIU 0.5 started (Aal0TuBp)2011-03-15 07:39:09 INFO Program CXC1323942_R71AZ02 on PIU 0.5 started (NssTu2)2011-03-15 07:39:10 AL M TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 07:39:10 PIU IN Operational BP 000500 TU2 2011-03-15 07:39:10 INFO Program CXC1728701_R9YC05 on PIU 0.5 started (RncLmGps)2011-03-15 07:39:10 INFO Program CXC1728703_R9YC05 on PIU 0.5 started (RncLmTas)2011-03-15 07:39:10 INFO BP ( smn = 0, apn = 5 ) operational, administrative state = UNLOCKED2011-03-15 07:39:15 AL * TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 07:39:15 AL M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 07:41:48 SEC TCPConnectionOpened from 147.214.104.66:41322 to localhost:568342011-03-15 07:44:11 SEC TCPConnectionClosed from /134.138.136.111:52050 to localhost:568342011-03-15 07:44:50 SEC TCPConnectionOpened from 134.138.136.111:52439 to localhost:568342011-03-15 07:45:04 SEC TCPConnectionClosed from /134.138.136.111:50726 to localhost:568342011-03-15 07:50:01 SEC moshelluser Login failure /telnet_150.236.180.63:65490 2011-03-15 07:53:07 EV Subrack=MS,Slot=5,PlugInUnit=1 PIU restarted2011-03-15 07:53:07 PIU OUT ShutdownCommand BP 000500 TU2 RankWarm ManualReconfiguration -2011-03-15 07:53:07 INFO BP ( smn = 0, apn = 5 ) manual restart. Reason: Planned reconfiguration. Restart rank = warm. Info text = - 2011-03-15 07:53:07 MO-A ACT Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 manualRestart 0|0|-


2011-03-15 07:53:07 LLOG 0005 TUB2 Board restart rank=Warm Proc=Cs_boardManager_proc Err=0xB0AD0000 (eri_api). Board manager restart. Restart ordered by system manager2011-03-15 07:53:11 AL * TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 07:53:11 AL M TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 07:53:11 PIU OUT UnOperational BP 000500 TU2 ExtRestartRequest2011-03-15 07:53:11 PIU IN Starting BP 000500 TU2 RankWarm2011-03-15 07:53:11 PIU IN Operational BP 000500 TU2 2011-03-15 07:53:11 ERR BP (smn = 0, apn = 5 ) down2011-03-15 07:53:11 INFO BP ( smn = 0, apn = 5 ) starting, administrative state = UNLOCKED2011-03-15 07:53:11 INFO Program CXC1725156_R71CD03 on PIU 0.5 started (Ebos)2011-03-15 07:53:11 INFO Program CXC1725467_R71AZ03 on PIU 0.5 started (I2cOpb)2011-03-15 07:53:11 INFO Program CXC1725310_R71CD04 on PIU 0.5 started (BcMpBp)2011-03-15 07:53:11 INFO Program CXC1725501_R71AZ03 on PIU 0.5 started (BcDbm2)2011-03-15 07:53:11 INFO Program CXC1725385_R71CD01 on PIU 0.5 started (IcsDbm2)2011-03-15 07:53:11 INFO Program CXC1725509_R71AZ01 on PIU 0.5 started (SpasBasSpic)2011-03-15 07:53:11 INFO Program CXC1721176_R71CD03 on PIU 0.5 started (PmAgent)2011-03-15 07:53:11 INFO Program CXC1321121_R71AZ01 on PIU 0.5 started (NssSyciBp)2011-03-15 07:53:11 INFO Program CXC1321794_R71AU01 on PIU 0.5 started (Aal0TuBp)2011-03-15 07:53:11 INFO Program CXC1323942_R71AZ02 on PIU 0.5 started (NssTu2)2011-03-15 07:53:11 INFO Program CXC1728701_R9YC05 on PIU 0.5 started (RncLmGps)2011-03-15 07:53:11 INFO Program CXC1728703_R9YC05 on PIU 0.5 started (RncLmTas)2011-03-15 07:53:11 INFO BP ( smn = 0, apn = 5 ) operational, administrative state = UNLOCKED2011-03-15 07:53:18 AL * TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 07:53:18 AL M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 07:54:21 LLOG 0005 TUB2 Board restart rank=Coldwithtest Proc=Cs_boardManager_proc Err=0xB0AD0006 (eri_api). Board manager restart. Restart ordered by system manager2011-03-15 07:54:22 EV Subrack=MS,Slot=5,PlugInUnit=1 PIU restarted2011-03-15 07:54:22 PIU OUT ShutdownCommand BP 000500 TU2 RankColdWTest ManualReconfiguration 02011-03-15 07:54:22 INFO BP ( smn = 0, apn = 5 ) manual restart. Reason: Planned reconfiguration. Restart rank = cold with HW test. Info text = 0 2011-03-15 07:54:22 MO-A ACT Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 manualRestart 3|0|02011-03-15 07:54:28 AL * TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 07:54:28 PIU OUT UnOperational BP 000500 TU2 ExtRestartRequest2011-03-15 07:54:28 ERR BP (smn = 0, apn = 5 ) down2011-03-15 07:54:33 EV Subrack=MS,Slot=5,PlugInUnit=1 PIU restarted2011-03-15 07:54:33 PIU IN Starting BP 000500 TU2 RankColdWTest2011-03-15 07:54:33 INFO BP ( smn = 0, apn = 5 ) starting, administrative state = UNLOCKED2011-03-15 07:54:33 INFO Program CXC1725156_R71CD03 on PIU 0.5 started (Ebos)2011-03-15 07:54:33 INFO Program CXC1725467_R71AZ03 on PIU 0.5 started (I2cOpb)2011-03-15 07:54:33 INFO Program CXC1725310_R71CD04 on PIU 0.5 started (BcMpBp)2011-03-15 07:54:33 INFO Program CXC1725501_R71AZ03 on PIU 0.5 started (BcDbm2)2011-03-15 07:54:33 INFO Program CXC1725385_R71CD01 on PIU 0.5 started (IcsDbm2)2011-03-15 07:54:33 INFO Program CXC1725509_R71AZ01 on PIU 0.5 started (SpasBasSpic)2011-03-15 07:54:33 INFO Program CXC1721176_R71CD03 on PIU 0.5 started (PmAgent)2011-03-15 07:54:33 INFO Program CXC1321121_R71AZ01 on PIU 0.5 started (NssSyciBp)2011-03-15 07:54:34 INFO Program CXC1321794_R71AU01 on PIU 0.5 started (Aal0TuBp)


2011-03-15 07:54:34 INFO Program CXC1323942_R71AZ02 on PIU 0.5 started (NssTu2)2011-03-15 07:54:34 INFO Program CXC1728701_R9YC05 on PIU 0.5 started (RncLmGps)2011-03-15 07:54:34 INFO Program CXC1728703_R9YC05 on PIU 0.5 started (RncLmTas)2011-03-15 07:54:49 AL M TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 07:54:49 AL M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 07:54:49 PIU IN Operational BP 000500 TU2 2011-03-15 07:54:49 INFO BP ( smn = 0, apn = 5 ) operational, administrative state = UNLOCKED2011-03-15 07:54:59 AL * TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 07:56:18 PGM OUT UnOperational MP 001400 CXC1728722_R9YC07 ProgramFailure (RncLmUe)2011-03-15 07:56:18 PGM IN Starting MP 001400 CXC1728722_R9YC07 (RncLmUe)2011-03-15 07:56:18 ERR Program CXC1728722_R9YC07 on PIU 0.14 failed (RncLmUe)2011-03-15 07:56:18 INFO Program CXC1728722_R9YC07 on PIU 0.14 started (RncLmUe)2011-03-15 08:44:26 PGM OUT UnOperational MP 001200 CXC1320784_R71CD01 ProgramFailure (Jvm)2011-03-15 08:44:26 ERR Program CXC1320784_R71CD01 on PIU 0.12 failed (Jvm)2011-03-15 08:44:27 PGM IN Starting MP 001200 CXC1320784_R71CD01 (Jvm)2011-03-15 08:44:27 INFO Program CXC1320784_R71CD01 on PIU 0.12 started (Jvm)2011-03-15 08:44:47 UP Current Trace properties for Upgrade Package functionality: Trace property file used: /c/systemfiles/cello/cma/su/prop/Trace_01.prop Priority Level: 2 Send Logs As Notifications: 0 Output stream: File Maximum trace log file size: 2000 Include classes: Absolute file path to trace log: /c/systemfiles/cello/cma/su/trace/Trace.log Is trace file open: true Number of trace logs before flush: 12011-03-15 08:44:58 SEC TCPConnectionOpened from 134.138.136.111:53335 to localhost:568342011-03-15 08:45:10 UP Waiting for the Configuration Service to be started...(registered).2011-03-15 08:45:24 AL M Plug-In Unit General Problem replaceable_unit_problem Subrack=MS,Slot=18,PlugInUnit=12011-03-15 08:45:30 AL C License Key File Fault configuration_or_customizing_error Licensing=12011-03-15 08:45:32 AL m Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=12011-03-15 08:45:32 AL M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 08:45:32 AL M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 08:45:34 AL M Loss of Signal loss_of_signal Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=12011-03-15 08:45:52 UP The Configuration Service is up and running.2011-03-15 08:49:26 SEC TCPConnectionOpened from 134.138.136.111:53383 to localhost:568342011-03-15 08:54:01 SEC TCPConnectionOpened from 134.138.136.111:53444 to localhost:568342011-03-15 08:54:05 PIU OUT ShutdownCommand BP 000500 TU2 RankWarm ManualReconfiguration 32011-03-15 08:54:05 INFO BP ( smn = 0, apn = 5 ) manual restart. Reason: Planned reconfiguration. Restart rank = warm. Info text = 3 2011-03-15 08:54:05 MO-A ACT Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 manualRestart 0|0|32011-03-15 08:54:05 LLOG 0005 TUB2 Board restart rank=Warm Proc=Cs_boardManager_proc Err=0xB0AD0000 (eri_api). Board manager restart. Restart ordered by system manager2011-03-15 08:54:08 PIU OUT UnOperational BP 000500 TU2 ExtRestartRequest2011-03-15 08:54:08 ERR BP (smn = 0, apn = 5 ) down2011-03-15 08:54:09 PIU IN Starting BP 000500 TU2 RankWarm2011-03-15 08:54:09 PIU IN Operational BP 000500 TU2 2011-03-15 08:54:09 INFO BP ( smn = 0, apn = 5 ) starting, administrative state = UNLOCKED2011-03-15 08:54:09 INFO Program CXC1725156_R71CD03 on PIU 0.5 started (Ebos)2011-03-15 08:54:09 INFO Program CXC1725467_R71AZ03 on PIU 0.5 started (I2cOpb)2011-03-15 08:54:09 INFO Program CXC1725310_R71CD04 on PIU 0.5 started (BcMpBp)2011-03-15 08:54:09 INFO Program CXC1725501_R71AZ03 on PIU 0.5 started (BcDbm2)2011-03-15 08:54:09 INFO Program CXC1725385_R71CD01 on PIU 0.5 started (IcsDbm2)


2011-03-15 08:54:09 INFO Program CXC1725509_R71AZ01 on PIU 0.5 started (SpasBasSpic)2011-03-15 08:54:09 INFO Program CXC1721176_R71CD03 on PIU 0.5 started (PmAgent)2011-03-15 08:54:09 INFO Program CXC1321121_R71AZ01 on PIU 0.5 started (NssSyciBp)2011-03-15 08:54:09 INFO Program CXC1321794_R71AU01 on PIU 0.5 started (Aal0TuBp)2011-03-15 08:54:09 INFO Program CXC1323942_R71AZ02 on PIU 0.5 started (NssTu2)2011-03-15 08:54:09 INFO Program CXC1728701_R9YC05 on PIU 0.5 started (RncLmGps)2011-03-15 08:54:09 INFO Program CXC1728703_R9YC05 on PIU 0.5 started (RncLmTas)2011-03-15 08:54:09 INFO BP ( smn = 0, apn = 5 ) operational, administrative state = UNLOCKED2011-03-15 08:54:12 EV Subrack=MS,Slot=5,PlugInUnit=1 PIU restarted2011-03-15 08:54:14 AL * TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 08:54:14 AL M TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 08:54:21 AL * TimDevice_DeviceFailure timing_problem_m3100 Subrack=MS,Slot=5,PlugInUnit=1,TimDevice=12011-03-15 08:54:21 AL M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 09:00:26 AL * TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 09:00:26 INFO Change the administrative state to LOCKED for BP ( smn = 0, apn = 5 ) 2011-03-15 09:00:26 MO-A SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 administrativeState 02011-03-15 09:00:57 SEC TCPConnectionOpened from 134.138.136.111:53587 to localhost:568342011-03-15 09:01:26 AL w Loss of System Clock Redundancy replaceable_unit_problem Synchronization=12011-03-15 09:01:57 AL M TU Synch Reference Loss of Signal loss_of_signal Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=12011-03-15 09:01:57 INFO Change the administrative state to UNLOCKED for BP ( smn = 0, apn = 5 ) 2011-03-15 09:01:57 MO-A SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 administrativeState 12011-03-15 09:02:18 SEC TCPConnectionClosed from /134.138.136.111:53587 to localhost:568342011-03-15 09:02:57 AL * Loss of System Clock Redundancy replaceable_unit_problem Synchronization=12011-03-15 09:02:58 SEC TCPConnectionOpened from 134.138.136.111:53639 to localhost:568342011-03-15 09:05:48 PGM OUT UnOperational MP 001400 CXC1728722_R9YC07 ProgramFailure (RncLmUe)2011-03-15 09:05:48 PGM IN Starting MP 001400 CXC1728722_R9YC07 (RncLmUe)2011-03-15 09:05:48 ERR Program CXC1728722_R9YC07 on PIU 0.14 failed (RncLmUe)2011-03-15 09:05:48 INFO Program CXC1728722_R9YC07 on PIU 0.14 started (RncLmUe)2011-03-15 09:36:03 MO-A ACT TransportNetwork=1,AtmPort=MS-6-1-1,VplTp=2,VpcTp=1,VclTp=Iup-50 eteLoopBack

Output in CSV format (“c” option), also used to show additional information

RNC11> lga

2011-02-23 21:11:17 AL C RncCapacity_ConfiguredLimitExceedsLicensedLimit performance_degraded Licensing=1,RncCapacity=FachDchHsUsers2011-02-24 18:55:08 AL M Plug-In Unit General Problem replaceable_unit_problem Subrack=MS,Slot=18,PlugInUnit=12011-02-24 18:55:15 AL C License Key File Fault configuration_or_customizing_error Licensing=1

RNC11> lgac

23;21:11:17;AL;Cr i t i ca l ;ManagedElement=1,SystemFunctions=1,Licensing=1,RncCapacity=FachDchHsUsers;RncCapacity_Conf iguredLimitExceedsLicensedLimit;performance_degraded;OperatorCapacityLimit: -1919119040 | LicensedCapacityLimit: -1919119040;Unacknowledged;_122


2011-02-24;18:55:08;AL;Major;ManagedElement=1,Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1;Plug-In Unit General Problem;replaceable_unit_problem;;Unacknowledged;_12011-02-24;18:55:15;AL;Critical;ManagedElement=1,SystemFunctions=1,Licensing=1;License Key File Fault;configuration_or_customizing_error;No license key fi le installed;Unacknowledged;_2

RNC11> lgu

2011-02-13 11:42:24 UP Validates input parameters.2011-02-13 11:42:54 UP The UCF(s)for the executing UP and dependent UP(s)are saved....

RNC11> lguc

2011-02-13;11:42:24;UP;;SU_SW: DeltaUPs - R71CD02;Exporter.handleExportRequest(): Val idates input parameters.2011-02-13;11:42:54;UP;;SU_SW: DeltaUPs - R71CD02;UpgradeBackupDataController.createUpgradePackageBackupData(): The UCF(s)for the executing UP and dependent UP(s)are saved....

RNC49> lgo

2009-06-17 12:20:13 MO-A CRE SwManagement=1,UpgradePackage=CXP9013831_R9LD01 2009-06-17 12:20:29 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 nonBlockingInstall 2009-06-17 12:54:37 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 rebootNodeUpgrade 2009-06-17 13:26:04 MO-A ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 confirmUpgrade 2009-06-18 09:18:53 MO-A ACT SwManagement=1,ConfigurationVersion=1 setStartable STP49_P7MD2009-06-18 09:18:55 MO-A ACT ManagedElement=1 manualRestart 0|0|UPGTOOL2009-06-18 09:30:00 MO-A DEL SwManagement=1,UpgradePackage=Virtual_1_of_CXP9013831_R9LD01

CSV format, showing userid (if seclevel 3 activated, otherwise “unknown”)

RNC49> lgoc

2009-06-18;09:33:00;MO-A;Unknown ; ;CRE SwManagement=1,UpgradePackage=CXP9013831_R9LD01 2009-06-18;09:33:15;MO-A;Unknown ; ;ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 nonBlockingInsta l l 2009-06-18;10:11:51;MO-A;Unknown ; ;ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 rebootNodeUpgrade 2009-06-18;10:45:52;MO-A;Unknown ; ;ACT SwManagement=1,UpgradePackage=CXP9013831_R9LD01 conf i rmUpgrade

RNC11> lgaemoc -m 1

Startdate=20080617.101223, Enddate=20080619.101224Date;Time;Log;Severity;Object;Event;Cause;AdditionalText;AckState;IdGet /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20080618-113223_8126/audit_trailLog8126.xml ... OK


Parsing alarmLog...Done.Parsing eventLog...Done.Parsing audit_trailLog.....Done.2008-06-17;10:19:35;MO-A;Unknown;;SET ManagedElement=1 userLabel2008-06-17;11:00:38;MO-A;Unknown;;SET Equipment=1 userLabel etuotai2008-06-17;11:01:15;AL;Cleared;ManagedElement=1,Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1;TU Synch Reference Loss of Signal;loss_of_signal;;Unacknowledged;_162008-06-17;11:01:15;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 administrativeState 02008-06-17;11:01:25;AL;Major;ManagedElement=1,Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1;TU Synch Reference Loss of Signal;loss_of_signal;;Unacknowledged;_172008-06-17;11:01:25;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 administrativeState 12008-06-17;11:03:31;MO-A;Unknown;;SET Equipment=1 userLabel epashus2008-06-17;11:03:38;MO-A;Unknown;;SET TransportNetwork=1,NniSaalTp=QAAL2-Iup-2351-2810 nniSaalProfileId NniSaalProfile=22008-06-17;11:03:47;MO-A;Unknown;;SET TransportNetwork=1,NniSaalTp=QAAL2-Iup-2351-2810 nniSaalProfileId NniSaalProfile=12008-06-17;11:05:17;MO-A;Unknown;;SET Equipment=1 userLabel eniksos2008-06-17;11:17:34;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TuDeviceGroup=1,TimDeviceSet=1 administrativeState 02008-06-17;11:17:36;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TuDeviceGroup=1,TimDeviceSet=1,TimDevice=1 administrativeState 02008-06-17;11:17:39;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 administrativeState 02008-06-17;11:18:13;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 administrativeState 02008-06-17;11:18:26;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 administrativeState 02008-06-17;11:19:15;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 administrativeState 12008-06-17;11:19:15;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TuDeviceGroup=1 administrativeState 12008-06-17;11:19:15;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TuDeviceGroup=1,TimDeviceSet=1 administrativeState 12008-06-17;11:19:15;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TuDeviceGroup=1,TimDeviceSet=1,TimDevice=1 administrativeState 12008-06-17;11:19:16;MO-A;Unknown;;SET Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 administrativeState 12008-06-17;11:19:17;AL;Major;ManagedElement=1,Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1;TU Synch Reference Loss of Signal;loss_of_signal;;Unacknowledged;_202008-06-17;11:19:20;MO-A;Unknown;;SET Equipment=1 userLabel evelhel2008-06-17;11:19:28;AL;Cleared;ManagedElement=1,Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1;TU Synch Reference Loss of Signal;loss_of_signal;;Unacknowledged;_20

Piping:

example: print all sccp related alarms:

RNC11> lga | grep -i sccp

Startdate=19661031.151320, Enddate=20090326.1438402009-02-07 04:11:28 AL w SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iuc-2351-23002009-02-07 04:11:28 AL w SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iup-2351-28102009-02-07 04:13:20 AL * SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iuc-2351-23002009-02-07 04:13:20 AL * SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iup-2351-2810


2009-02-07 04:21:40 AL w SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iup-2351-28102009-02-07 04:21:40 AL w SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iuc-2351-23002009-02-07 04:23:35 AL * SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iuc-2351-23002009-02-07 04:23:35 AL * SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iup-2351-28102009-02-07 04:32:27 AL w SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iup-2351-28102009-02-07 04:32:27 AL w SCCP Remote Subsystem Unavailable unavailable SccpSp=Iu,SccpScrc=1,SccpApRemote=Iuc-2351-2300

Refresh (“r” option):

The logs are only fetched once, then stored in a local cache. To refresh the cache, use the “r” option, e.g. “lgar”

Note: the refresh option is applicable for many other commands like: inv, bo, stt, stv, ced, etc..

5.6 LG command in offline mode

Fetching Log files for offline processing

Fetch to default location

RNC11> lgf

Startdate=19661031.151320, Enddate=20090326.143330...get /c/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml ... OKget /c/logfiles/alarm_event/ALARM_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/alarm_event/ALARM_LOG.xml ... OKget /c/logfiles/alarm_event/EVENT_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/alarm_event/EVENT_LOG.xml ... OKget /c/logfiles/hw_inventory/CELLO_HWINVENTORY_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/hw_inventory/CELLO_HWINVENTORY_LOG.xml ... OKget /c/logfiles/security/CELLO_SECURITYEVENT_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/security/CELLO_SECURITYEVENT_LOG.xml ... OKget /c/logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml ... OKget /c/logfiles/audit_trail/AUDIT_TRAIL_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/audit_trail/AUDIT_TRAIL_LOG.xml ... OKget /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml ... OK


get /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml ... OKget /c/logfiles/systemlog/00000syslog /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/systemlog/00000syslog ... OKget /c/logfiles/systemlog/00001syslog /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/logfiles/systemlog/00001syslog ... OK....get /c/systemfiles/cello/cma/su/Trace.log_old /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/systemfiles/cello/cma/su/Trace.log_old ... OKget /c/systemfiles/cello/cma/su/Trace.log /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/systemfiles/cello/cma/su/Trace.log ... OKRemoving all empty directories in /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641find /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641 -type d | LANG=C LC_ALL=C /home/eanzmagn/moshell/gawk.linux ' {line[++i]=$1};END{for(j=i;j>=1;j--)print line[j]}' | xargs rmdir 2>/dev/nulllh all te log read |tee /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/teread31518.logput /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090325-141640_31488/lhCmd31518 /d/usr/lhCmd31518 ... OK..........................................................................................................................................New directory: /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641zip -rmD /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/RNC11_logfiles.zip logfiles systemfiles teread.log adding: logfiles/availability/CELLO_AVAILABILITY2_LOG.xml (deflated 97%) adding: logfiles/alarm_event/ALARM_LOG.xml (deflated 96%) adding: logfiles/alarm_event/EVENT_LOG.xml (deflated 95%) adding: logfiles/hw_inventory/CELLO_HWINVENTORY_LOG.xml (deflated 94%) adding: logfiles/security/CELLO_SECURITYEVENT_LOG.xml (deflated 96%) adding: logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml (deflated 98%) adding: logfiles/audit_trail/AUDIT_TRAIL_LOG.xml (deflated 97%) adding: logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml (deflated 98%) adding: logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml (deflated 96%) adding: logfiles/systemlog/00000syslog (deflated 94%) adding: logfiles/systemlog/00001syslog (deflated 94%) adding: systemfiles/cello/cma/su/Trace.log_old (deflated 93%) adding: systemfiles/cello/cma/su/Trace.log (deflated 94%) adding: teread.log (deflated 92%)

New directory: /home/eanzmagnSuccessful storage of the CPP logs to /home/eanzmagn/moshell_logfiles/logs_moshell/lg/137.58.194.147/20090325_141641/RNC11_logfiles.zipFor offline processing, run: lg[<options>] -l <zipfile>.

Fetch to specific location

RNC11> lgf ~/logfiles

...<cut>...


Successful storage of the CPP logs to /home/eanzmagn/logfiles/RNC11_logfiles.zipFor offline processing, run: lg[<options>] -l <zipfile>.

Run lg while offline

OFFLINE> lgaevsm –l /home/eanzmagn/logfiles/RNC11_logfiles.zip –m 5....<cut>...

6 OFFLINE MODE

6.1 Collecting offline dumps

OFFLINE> h dcg

***************************************************************************************dcg[meiasrfk] [<logdir>]***************************************************************************************Fetch data for TRs/CSRs, according to the Data Collection Guidelines.

The dcg command offers a number of options, it is possible to combine several options, eg: "dcgmsr"

Options: - m: mandatory data. Includes mandatory printouts as well as offline files (modump, cpp logfiles, pm ropfiles, dbdat) - e: subset of the mandatory data which can be taken in case of emergency, before doing board/node restart. This option will usually be run on its own. - i: IP printouts - a: AAL2 printouts - s: SS7 printouts - r: RNC specific printouts - f: fetch cpp logs and ropfiles. Two zipfiles are produced (one for cpp logs and one for ropfiles) which can be used in offline mode in pmr, pmx, lg and the "-l" option. Refer to the chapter "Offline mode" for more info. - k: take MO dump (kget format). A zipfile is produced containing the MO dump and MOM of the node, it can be used in offline mode by running "moshell <zipfile>". Refer to the chapter "Offline mode" for more info.

Option k fetches the kget and the RNC device to module mapping data ==> std/bo/bp/etc work better against modump.zip compared to kget.log

Option f is same as lgf+pmrf : better than fetching the directories /c/logfiles and /c/pm_data because contains extra info like board HW tables (lgf) and Cell to module mapping (pmrf)


Summary:

Info Log CommandMO data <node>_modump.zip dcgk

dcgkf(or dcgm)

CPP logs <node>_logfiles.zip lgfdcgfStatistics files (xml) <node>_ropfiles.zip pmrf

CV (db.dat) <node>_DCG_duringfault.zip cvget <cv>

6.2 Connecting to offline dumps, available commands in offline mode

Put all the files in same directory and connect to the modump, it will find the remaining 3 files : CV, logs, ROPsAlso possible to put all 4 files (modump, CV/db.dat, logfiles, ropfiles) into a single zipfile and connect to that zipfile.When running dbc/lg/pmr/pmx, no need to give the path of the zipfiles if they are in the same folder as modump.ziptrun can be used in offline mode to test MO script syntax

ws10008> moshell exercises/RNC3820/RNC74/RNC74_modump.zip

##################################################################### Welcome to MoShell 8.0r ## Finn Magnusson, Jan Pettersson ## http://utran01.au.ao.ericsson.se/moshell ## Contact: [email protected] ## [email protected] #####################################################################

unzip -ojq exercises/RNC3820/RNC74/RNC74_modump.zip -d /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20110118-134549_16712/modump

Found RNC device/module data: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20110118-134549_16712/modump/drhlog.txtFound MO dump: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20110118-134549_16712/modump/137.58.194.74_dcg_k.log.gz

Found logfiles: exercises/RNC3820/RNC74/RNC74_logfiles.zip

Found ropfiles: exercises/RNC3820/RNC74/RNC74_ropfiles.zip

Found dcg CV: exercises/RNC3820/RNC74/RNC74_DCG_20101204_121112_duringfault.zip

Parsing MOM (cached): /home/eanzmagn/jarxml/RNC_NODE_MODEL_M_1_65_COMPLETE.xml.cache.gz ............................................................................................Done.


Using paramfile /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_M_1_50.txtParsing file /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_M_1_50.txt ....Done.Connected to OFFLINE_RNC74_modump.zip (ManagedElement=1)Last MO: 63082. Loaded 63082 MOs. Total: 63083 MOs.Preparing offline MIB:0% ~50% ~100%

...................................................................................................


For offline browsing of PM ropfiles, run "pmr/pmx".For offline browsing of CPP logfiles, run "lg[options]".

OFFLINE_RNC74_DCG_K> h

----------------------------------- COMMANDS SUPPORTED IN OFFLINE MODE ----------------------------------mom[aptcdbrflou] Print description of MO classes, CM/FM attributes, actions, enums and structs.lt/clt/ltc[1-9] Load MO tree (full or partial) and build proxy table.lu/llu Unload MOs from MO tree.pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell.ma/lma Add MO(s) to an MO group.mr/lmr Remove an MO group or remove MOs from an MO group (MOs will NOT be deleted, only the group).mp Print all defined MO groups.get/lget Read CM/FM attribute(s) from MO(s).hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).kget/lkget Display CM/FM attributes in exportable printout format.st/lst Print state of MOs (operationalState and administrativeState when applicable).prod Print productData of MO(s).lk/llk View all MO's linked to an MO, and their states (admState and opState).lko/llko Obsolete command, use lk/llk instead.set[m][c][1]/lset[m][c][1] Set an attribute value on one or several MO's.eset[c][1]/leset[c][1] Set one or several attributes on one or several MO's, using regexp matching on the attribute name.bl[s]/lbl[s] Lock or soft-lock MO(s).deb/ldeb Unlock MO(s).acl/lacl Lists available MO actions.acc[e]/lacc[e] Execute an MO action.cr[e] Create an MO.del/ldel Delete MO(s).rdel/lrdel Delete MO(s) together with children and reserving MOs.s+/s-/s? Sort MO list in alphabetical order instead of proxy order.u+[s]/u-/u?/u! Handling of undo mode (for cr/del/rdel/set/bl/deb/acc commands). Can be used for generation of MO scripts as well.run Run a command file in moshell format.trun[is1cr] Run a command file in EMAS/MoTester format.


parsemom Parse an xml MOM file.fdel/lfdel Delete MO(s), including systemCreated MOs.cvls/cvmk/cvms/cvset/cvrm/cvcu/cvget/cvput/cvls1 CV backup handling: list, make local, make remote, remove, setstartable.inv[hlr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.stc[p][r] Display state and configuration of Atm/Tdm CrossConnections.std[ar] Display state and configuration of devices (RNC and MGW only).stv[b][r] Display state, user, and bandwidth usage for ATM ports and channels.stt[r] Display state and user of Physical Ports and Ds0Bundles.sti[bcpr] Display state and configuration of IP interfaces.diff[o][m]/ldiff[m] Parameter auditing or MO dump comparisons.str[12ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).lki Obsolete command, use lkra instead.lkr[a] Print RNC Iub resources allocation.lg[acdefghilmnopqrstuvwxyz] Fetching and processing of node logsuv Print or change moshell configuration settings (also called "user variables").pv Print scripting variables.!/l Execute a unix command on the PC/workstation.l+[m][m][s][o]/l-/l? Open/close moshell logfiles.dbc[s] Database consistency checkbo[ar]/ba[swdp]/br[wd]/be[0-50]/bp Manage board groups that can be used for running COLI commands on multiple boards.hi Print history of moshell commands entered during the current session.time[t] Measure time taken by an moshell command or by each command in a moshell command file.lmid[c]/upid[om] Print translation of loadmodule/upgradepackage product number or T&E error codes.p/w/pw/b Change moshell prompt and/or window title.prox[+-] Toggle display of proxy identities in printout of get <mo> <attribute> command.ul Toggle display of userlabel in st/lst and pget/lpget printout.conf[bld][+-] Toggle confirmation on various MO commands.ip2d/d2ip Convert an IP address into the format used in the fRO (sql database) or vice-versa.h2d/d2h Convert an integer to hexadecimal or viceversa.h2b/b2h Convert a binary to hexadecimal or viceversa.wait Specify a delay in hrs, mins, secs, or rops. Similar to the unix "sleep" command (scripting).return Exit from a command file without exiting from moshell (scripting).print Print a line or variable (scripting).alias/unalias Print or define command aliases.smd[slcr] Server Maintenance - disk usageq/by/exit/quit Exit moshell.pmom[acd]/lmom[c] Print description of PM counters (pmom) or log attributes (lmom, CDMA only).pmx[hfdnsckw] Display counter values, extracted from the statistics ROP files.pmr[agfkw] Produce PM KPI reports, based on counter values in statistics ROP fi les and formulas in CPI documentation.emom Display list of events available for each kind of event-based scanner.


110218-08:36:29 OFFLINE_RNC74_dcg_k 8.0s RNC_NODE_MODEL_M_1_65_COMPLETE stopfile=/tmp/16478


=================================================================================================================0 ManagedElement=1=================================================================================================================ManagedElementId 1applicationConfiguration t[0] = faultTolerantCoreStates s[2] = ManagedElement=1,Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1;PassiveReady ManagedElement=1,Equipment=1,Subrack=MS,Slot=24,PlugInUnit=1;Active healthCheckResult Struct{3} >>> 1.healthCheckResultCode = 99 (INITIAL_VALUE) >>> 2.message = >>> 3.startTime = healthCheckSchedule t[0] = logicalName mimInfo Struct{3} >>> 1.mimName = RNC_NODE_MODEL_M >>> 2.mimVersion = 1.65 >>> 3.mimRelease = mimName RNC_NODE_MODEL_MproductName productNumber productRevision productType Nodesite userLabel =================================================================================================================Total: 1 MOs

OFFLINE_RNC74_DCG_K> get iublink=iub-109

110218-08:36:39 OFFLINE_RNC74_dcg_k 8.0s RNC_NODE_MODEL_M_1_65_COMPLETE stopfile=/tmp/16478=================================================================================================================23447 RncFunction=1,IubLink=Iub-109=================================================================================================================IubLinkId Iub-109administrativeState 1 (UNLOCKED)atmUserPlaneTermSubrackRef availabilityStatus 0 (NO_STATUS)cachedRemoteCpIpAddress1 cachedRemoteCpIpAddress2


controlPlaneTransportOption Struct{2} >>> 1.atm = 0 (FALSE) >>> 2.ipv4 = 1 (TRUE)dlHwAdm 95froId 108iubLoadDlThresholdSpeech Struct{5} >>> 1.amrWb12650 = 100 >>> 2.amrWb8850 = 100 >>> 3.amr12200 = 100 >>> 4.amr7950 = 100 >>> 5.amr5900 = 100iubLoadUlThresholdSpeech Struct{5} >>> 1.amrWb12650 = 100 >>> 2.amrWb8850 = 100 >>> 3.amr12200 = 100 >>> 4.amr7950 = 100 >>> 5.amr5900 = 100l2EstReqRetryTimeNbapC 5l2EstReqRetryTimeNbapD 5operationalState 1 (ENABLED)rbsId 109remoteCpIpAddress1 10.70.4.122remoteCpIpAddress2 remoteSctpPortNbapC 5115remoteSctpPortNbapD 5116reservedBy [12] = >>> reservedBy = RncFunction=1,UtranCell=Iub-109-1 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-2 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-3 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-4 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-5 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-6 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-7 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-8 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-9 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-10 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-11 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-12rncModuleRef RncModule=ES-1-2-1sctpRef Sctp=ES-1-2softCongThreshGbrBwDl 90softCongThreshGbrBwUl 90spare 0switchModuleNumber -1tpcPattern01CountDl 8


ulHwAdm 95userLabel Iub-109userPlaneGbrAdmBandwidthDl 200userPlaneGbrAdmBandwidthUl 200userPlaneGbrAdmEnabled 1 (TRUE)userPlaneGbrAdmMarginDl 0userPlaneGbrAdmMarginUl 0userPlaneIpResourceRef IpAccessHostPool=IUBuserPlaneTransportOption Struct{2} >>> 1.atm = 0 (FALSE) >>> 2.ipv4 = 1 (TRUE)=================================================================================================================Total: 1 MOs

6.3 Offline mode against CV/db.dat

ws10008> moshell -d exercises/RNC3820/RNC74/RNC74_DCG_20101204_121112_duringfault.zip

##################################################################### Welcome to MoShell 8.0r ## Finn Magnusson, Jan Pettersson ## http://utran01.au.ao.ericsson.se/moshell ## Contact: [email protected] ## [email protected] #####################################################################

unzip -ojq exercises/RNC3820/RNC74/RNC74_DCG_20101204_121112_duringfault.zip -d /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20110118-140112_16886/modump

Found db.dat: /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20110118-140112_16886/modump/db.dat

Starting Polyhedra SQL server on port 8001... OK.Reading PM scanner data (21 lines).....................

Reading MAO data (63083 lines) ...Connected to OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip (ManagedElement=1)MOM version: RNC_NODE_MODEL_M_1_65 (CPP8)0% ~50% ~100%....................................................................................................


Last MO: 63082. Loaded 63082 MOs. Total: 63083 MOs.

Reading FRO data (63571 lines) ...0% ~50% ~100%...................................................................................................

The database is OKTo print the consistency check result, type "dbc".To print the list of available commands, type "h".


OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> h

----------------------------------- COMMANDS SUPPORTED IN SQL MODE ----------------------------------mom[aptcdbrflou] Print description of MO classes, CM/FM attributes, actions, enums and structs.lu/llu Unload MOs from MO tree.pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell.ma/lma Add MO(s) to an MO group.mr/lmr Remove an MO group or remove MOs from an MO group (MOs will NOT be deleted, only the group).mp Print all defined MO groups.get/lget Read CM/FM attribute(s) from MO(s).hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).fro[m]/lfro[m] Read MO persistent data from node database via SQL.sql/select To run a SQL command while in db.dat mode. The db.dat or cv.zip is loaded with moshell option "-d".s+/s-/s? Sort MO list in alphabetical order instead of proxy order.run Run a command file in moshell format.inv[hlr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.uv Print or change moshell configuration settings (also called "user variables").pv Print scripting variables.!/l Execute a unix command on the PC/workstation.l+[m][m][s][o]/l-/l? Open/close moshell logfiles.dbc[s] Database consistency checkbo[ar]/ba[swdp]/br[wd]/be[0-50]/bp Manage board groups that can be used for running COLI commands on multiple boards.hi Print history of moshell commands entered during the current session.time[t] Measure time taken by an moshell command or by each command in a moshell command file.p/w/pw/b Change moshell prompt and/or window title.prox[+-] Toggle display of proxy identities in printout of get <mo> <attribute> command.ip2d/d2ip Convert an IP address into the format used in the fRO (sql database) or vice-versa.h2d/d2h Convert an integer to hexadecimal or viceversa.h2b/b2h Convert a binary to hexadecimal or viceversa.wait Specify a delay in hrs, mins, secs, or rops. Similar to the unix "sleep" command (scripting).return Exit from a command file without exiting from moshell (scripting).print Print a line or variable (scripting).


smd[slcr] Server Maintenance - disk usageq/by/exit/quit Exit moshell.pst List all PM scanners and their state.pgets[n][m][r] Print scanner contents.

OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> get 0

110118-14:11:50 OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip 8.0r RNC_NODE_MODEL_M_1_65 stopfile=/tmp/16920=================================================================================================================0 ManagedElement=1=================================================================================================================maoTableRef modata_r2maoTableIndex id=1maoClassRev 6100maoClass ManagedElementmaoName 1MibPrefix ProductType NodeapplicationConfiguration [0]healthCheckSchedule [0]mimName RNC_NODE_MODEL_MmimRelease mimVersion 1.65userLabel froTableRef osameresource_01froTableIndex id=0cvolfreelim 0esctype 4id 0logicname ''pname ''pno ''prev ''site ''=================================================================================================================Total: 1 MOs

OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> get iublink=iub-109

110118-14:11:53 OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip 8.0r RNC_NODE_MODEL_M_1_65 stopfile=/tmp/16920=================================================================================================================


6155 RncFunction=1,IubLink=Iub-109=================================================================================================================maoTableRef modata_r2maoTableIndex id=6615maoClassRev 7000maoClass IubLinkmaoName Iub-109atmUserPlaneTermSubrackRef nullfroId 108rbsId 109reservedBy [12] >>> reservedBy = RncFunction=1,UtranCell=Iub-109-1 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-2 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-3 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-4 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-5 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-6 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-7 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-8 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-9 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-10 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-11 >>> reservedBy = RncFunction=1,UtranCell=Iub-109-12rncModuleRef RncModule=ES-1-2-1sctpRef Sctp=ES-1-2switchModuleNumber -1userLabel Iub-109userPlaneIpResourceRef IpAccessHostPool=IUBfroTableRef roamfroiublinkdbtable_12froTableIndex theclientsuniqueid=108admstate 1atmuserplanetermsubrackfroid -1cachedremotecpipaddress1 ' 'cachedremotecpipaddress2 ' 'controlplanetransportoption_atm 0controlplanetransportoption_ipv4 1dlhwadm 95iubloaddlthresholdspeech_amr12200 100iubloaddlthresholdspeech_amr5900 100iubloaddlthresholdspeech_amr7950 100iubloaddlthresholdspeech_amrwb12650 100iubloaddlthresholdspeech_amrwb8850 100iubloadulthresholdspeech_amr12200 100iubloadulthresholdspeech_amr5900 100


iubloadulthresholdspeech_amr7950 100iubloadulthresholdspeech_amrwb12650 100iubloadulthresholdspeech_amrwb8850 100l2estreqretrytimenbapc 5l2estreqretrytimenbapd 5remotecpipaddress1 '10.70.4.122 'remotecpipaddress2 ' 'remotesctpportnbapc 5115remotesctpportnbapd 5116rncmodulefroid 8 (RncModule=ES-1-2-1)sctpfroid 6 (Sctp=ES-1-2)softcongthreshgbrbwdl 90softcongthreshgbrbwul 90spare 0switchmodulenumber -1theclientsuniqueid 108tpcpattern01countdl 8ulhwadm 95userplanegbradmbandwidthdl 200userplanegbradmbandwidthul 200userplanegbradmenabled 1userplanegbradmmargindl 0userplanegbradmmarginul 0userplaneipresourcefroid 3 (IpAccessHostPool=IUB)userplanetransportoption_atm 0userplanetransportoption_ipv4 1=================================================================================================================Total: 1 MOs

OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> pst

110118-14:12:15 OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip 8.0r RNC_NODE_MODEL_M_1_65 stopfile=/tmp/16920================================================================================ PROXY SCANNER-NAME STATE================================================================================ 43 PREDEF.PRIMARY.STATS ACTIVE 44 PREDEF.SECONDARY.STATS ACTIVE 87 USERDEF.RncFunction.STATS ACTIVE 88 USERDEF.UtranCell.STATS ACTIVE 89 USERDEF.UtranRelation_Intra.STATS ACTIVE 90 USERDEF.UtranRelation_Cnhho.STATS ACTIVE 91 USERDEF.FrameSynch.STATS ACTIVE 92 USERDEF.Paging_GLR.STATS ACTIVE 93 USERDEF.Handover.STATS ACTIVE


94 USERDEF.UeRc.STATS ACTIVE 95 95 ACTIVE 96 USERDEF.PlugInUnit.STATS ACTIVE 97 USERDEF.LoadControl_Requests.STATS ACTIVE 98 USERDEF.Aal2Ap.STATS ACTIVE 99 USERDEF.InternalLinkGroup.STATS ACTIVE 100 USERDEF.Ranap.STATS ACTIVE 101 USERDEF.IubLink_GbrAdm.STATS ACTIVE 102 USERDEF.PacketDataRouter.STATS ACTIVE 103 USERDEF.L3_Congestion.STATS ACTIVE 104 USERDEF.IurLink.STATS ACTIVE 105 USERDEF.EthernetSwitch.STATS ACTIVE================================================================================>>> Total: 21 Scanners

OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> pgets 87

110118-14:12:22 OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip 8.0r RNC_NODE_MODEL_M_1_65 stopfile=/tmp/16920================================================================================87 USERDEF.RncFunction.STATS ACTIVE 900 14================================================================================RncFunction 14 pmCsCnDowntime pmIuSccpConRate pmMocnRedirections pmNoDiscardSduDcch pmNoDiscardSduDtch pmNoInvalidRabEstablishAttempts pmNoInvalidRabReleaseAttempts pmNoReceivedSduDcch pmNoReceivedSduDtch pmNoRetransPduDcch pmNoRetransPduDtch pmNoSentPduDcch pmNoSentPduDtch pmRefusedRequestSccpMpLoad================================================================================>>> Total: 1 Scanners

OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> fro rncmodule=

110118-14:12:50 OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip 8.0r RNC_NODE_MODEL_M_1_65 stopfile=/tmp/16920=================================================================================================================MO Attribute Value


=================================================================================================================RncModule=MS-6-1 froId 0RncModule=MS-6-2 froId 1RncModule=MS-8-1 froId 2RncModule=MS-8-2 froId 3RncModule=MS-11-1 froId 4RncModule=MS-11-2 froId 5RncModule=MS-16-1 froId 6RncModule=MS-16-2 froId 7RncModule=ES-1-2-1 froId 8RncModule=ES-1-2-2 froId 9RncModule=ES-1-8-1 froId 10RncModule=ES-1-8-2 froId 11RncModule=ES-1-11-1 froId 12RncModule=ES-1-11-2 froId 13=================================================================================================================Total: 14 MOs

OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> select name from tables

110118-14:13:31 OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip 8.0r RNC_NODE_MODEL_M_1_65 stopfile=/tmp/16920Component sqlc (V08.03.0002/SOLARIS-sparc)Copyright (C) 1994-2010 by Enea Software ABSQL> SQL> Including File '/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20110118-140112_16886/sqlcmd16920.sql'Include Done

+--------------------------------------------+| name |+--------------------------------------------+| 'integer' || 'varchar' || 'float' || 'bool' || 'binary' || 'datetime' || 'char' || 'integer8' || 'integer16' || 'integer32' || 'float32' || 'tables' || 'views' || 'attributes' |


| 'indexes' || 'indexattrs' || 'journalcontrol' || 'sqlprocedure' || 'dbcontrol' || 'csntpresource' || 'cssrresource_02' || 'csslotresource_02' || 'cspiulinkresource' || 'cspiuresource_02' || 'csdeviceresource' || 'cspgmresource_03' || 'csxpresource_01' || 'osamesyspar_02' || 'cspgminstanceresource' || 'osameresource_01' || 'csrpuresource' || 'csfanpgmresource' || 'dhcpr_01' || 'dhcpr_01arrays' || 'switchfabric' || 'jvmfro_r1' || 'switchmodule' || 'linkgroup' || 'sai' || 'physicallink' || 'sili' || 'logicallink' || 'dataport' || 'mopplet' || 'motype_r1' || 'modata_r2' || 'cmarev_r2' || 'ipsystemtable_r1' || 'scannerdata' || 'aal0cepfrotable' || 'nssislfrotable' || 'nssscufrotable' || 'nsssxufrotable' || 'nsstuprogtable' || 'nsstureffrotable' || 'nsssynchparamstable' || 'nsstufrotable1' || 'nsssynchfrotable' || 'phyboarddatatable' |


| 'phyeqmtfrotable_02' || 'phyeqmtpgmfrotable' || 'sppspuresource_02' || 'sppspmresource_02' || 'spppgmresource_02' || 'sppspupgmresource_02' || 'phy_os155_02' || 'phy_hpdh' || 'phy_lpdh' || 'phy_mspg_02' || 'phy_mspg_extended' || 'phy_hp' || 'phy_lp_02' || 'ansaal05nccriserver_01' || 'aal5cepfrotable_02' || 'ansaal2nccdtadm_02' || 'ansaal2nccadmtable_01' || 'ansaal2cpsrcadmtable_01' || 'ansaal2nccspfrotable_01' || 'ansaal2nccapfroobj_03' || 'ansaal2nccpdufroobj_01' || 'ansaal2nccpdufropl_01' || 'ansaal2nccrcfrotable_03' || 'ansaal2nccrcfroaptable_02' || 'ansaal2nccqoscpfrotable_01' || 'aet_aal2hwcharacteristicstable_3' || 'aet_atmhwcharacteristicstable_2' || 'aet_ds0hwcharacteristicstable_1' || 'aet_imahwcharacteristicstable_1' || 'aet_etmc1subunittable_1' || 'aet_etmc41subunittable_1' || 'aet_etm3subunittable_1' || 'aet_cbusubunittable_1' || 'aet_etmc41ssubunittable_1' || 'aet_hwcharacteristicsrevisiontable_1' || 'aet_etmf41subunittable_1' || 'exsesmpfro_03' || 'exsesmfro_02' || 'aalpermconnfrotable' || 'exsvlanfro_01' || 'sctp_frotable_r4' || 'usaalcepfrotable_3' || 'ipcpadmdhfro_06' || 'ipcpadmlhdscpstructfrotable_01' || 'ipcppgmfrotable_02' |


| 'ipcpetipfrotable_01' || 'ipcpadmlhfrotable_06' || 'ipmuxfro' || 'ipacipsyncreffro_05' || 'ipadmacfroipv4_02' || 'ipacmfghostfro_02' || 'ipadmhostfrobase_06' || 'exssstpfro_02' || 'exsadmexhfro_02' || 'exsspstpfro_03' || 'exsesadfro_02' || 'exslagfro_03' || 'exsadmexphfro_03' || 'ipacsctphostfro_01' || 'nsaalcepfrotable_4a' || 'aal1permconnfrotable_01' || 'aal1cepfrotable_01' || 'ansaal1nccriserver_01' || 'tdmccfrotable_1' || 'imalinkfrotable' || 'imagroupfrotable' || 'aal2qosfrotable' || 'aal2pathepadmtable' || 'aal2pathepfrotable_6' || 'scc_cp_inst_table_r1' || 'mtp3b_sp_frotable_r8' || 'mtp3b_rs_frotable_r6' || 'mtp3b_ap_frotable_r4' || 'mtp3b_ls_frotable_r6' || 'mtp3b_r_frotable_r5' || 'mtp3b_l_frotable_r5' || 'mtp3b_smm_frotable_r1' || 'ds0bundlefrotable_1' || 'sccp_sp_frotable_r8' || 'sccp_scrc_frotable_r2' || 'sccp_local_ap_frotable_r3' || 'sccp_remote_ap_frotable_r1' || 'sccp_es_frotable_r4' || 'sccp_gt_frotable_r3' || 'sccp_policing_frotable_r3' || 'sccp_accounting_frotable_r2' || 'm3ua_frotable_r1' || 'm3ua_r_ep_frotable_r1' || 'm3ua_l_sp_frotable_r1' || 'm3ua_r_sp_frotable_r2' |


| 'm3ua_l_as_frotable_r1' || 'm3ua_r_as_frotable_r1' || 'm3ua_rk_frotable_r1' || 'm3ua_rkg_frotable_r1' || 'm3ua_sgn_frotable_r1' || 'cslogresource' || 'atmtdfrotable_2' || 'etatmportfrotable_4' || 'vpcpfrotable_1' || 'vpcepfrotable_1' || 'vccpfrotable_3' || 'vccepfrotable_2' || 'aal1epfrotable_4' || 'atmccfrotable_1' || 'aclfro' || 'aclentry' || 'severity_config' || 'httpsdb' || 'aet_sysparameterstable_1' || 'roamfrorncfeaturedbtable_01' || 'roamfrornccapacitydbtable_00' || 'roamfrorncfunctiondbtable_30' || 'roamfrorncrealtimeindicatorsdbtable_00' || 'roamfrocpcdbtable_00' || 'roamfrosaspositioningdbtable_00' || 'roamfrotnlcchqosclassprofiledbtable_00' || 'roamfrotnlqosclassdbtable_01' || 'roamfrosiddbtable_06' || 'roamfrorcsdbtable_01' || 'roamfrorabhandlingdbtable_13' || 'roamfroarpqosclassprofiledbtable_00' || 'roamfrotrafficclassdbtable_03' || 'roamfrotrafficclasspsintdbtable_03' || 'roamfrotnldchqosclassprofiledbtable_00' || 'roamfrornlqosclassprofiledbtable_03' || 'roamfrospiqosclassdbtable_02' || 'roamfrotnlhspaqosclassprofiledbtable_00' || 'roamfrotnliuqosclassprofiledbtable_00' || 'roamfroarpmapdbtable_00' || 'roamfropowercontroldbtable_14' || 'roamfropagingdbtable_01' || 'roamfrohandoverdbtable_12' || 'roamfrocpmtransgappattseqdbtable_04' || 'roamfrochannelswitchingdbtable_11' || 'roamfrocellupdatedbtable_01' |


| 'roamfrocchframesynchdbtable_10' || 'roamfrorncsystemparametersdbtable_05' || 'roamfrorrcdbtable_08' || 'roamfrosecurityhandlingdbtable_00' || 'roamfrouemeascontroldbtable_13' || 'roamfrouepositioningdbtable_01' || 'roamfrorttpositioningdbtable_00' || 'roamfropositioningserviceclassdbtable_00' || 'roamfroagpspositioningdbtable_01' || 'roamfrospdevicepooldbtable_00' || 'roamfrorncmoduledbtable_03' || 'roamfrotimdevicedbtable_01' || 'maufact_r1' || 'roamfropdrdevicedbtable_02' || 'roamfroccdevicedbtable_02' || 'roamfrodcdevicedbtable_02' || 'ipfrotable_06' || 'dnsclient_02' || 'dnsclient_02arrays' || 'iprtfrotable_02' || 'iproutetable_03' || 'ethlink_02' || 'ethlink_02arrays' || 'roamfroipaccesshostpooldbtable_00' || 'roamfrodchframesynchdbtable_01' || 'roamfrouerrctypedbtable_00' || 'roamfrouerabtypedbtable_06' || 'roamfrosubflowdbtable_01' || 'roamfrosduformatdbtable_02' || 'roamfrouercdbtable_20' || 'roamfrouerctrchdbtable_06' || 'roamfrouercrbdbtable_05' || 'roamfrouercphychuldbtable_02' || 'roamfrouercphychdldbtable_02' || 'roamfrouerchsdschdbtable_04' || 'roamfrouercedchflowdbtable_02' || 'roamfrouercphychedchdbtable_03' || 'roamfrouercedchgainfactorsdbtable_01' || 'roamfrouercrabdbtable_03' || 'roamfrouercrbrlcdbtable_01' || 'roamfroutrannetworkdbtable_00' || 'roamfrocnoperatordbtable_03' || 'roamfroiulinkdbtable_03' || 'roamfroranapdbtable_10' || 'roamfroipethpacketdatarouterdbtable_01' |


| 'roamfroiurlinkdbtable_14' || 'roamfrornsapdbtable_02' || 'roamfroiublinkdbtable_12' || 'roamfronodesynchdbtable_05' || 'roamfroiubedchdbtable_00' || 'roamfronbapcommondbtable_01' || 'roamfronbapdedicateddbtable_02' || 'roamfrowcdmacarrierdbtable_00' || 'roamfrolocationareadbtable_01' || 'roamfroserviceareadbtable_01' || 'roamfroroutingareadbtable_03' || 'roamfrouradbtable_00' || 'roamfrombmsdbtable_06' || 'roamfromtchframesynchdbtable_01' || 'roamfroutrancelldbtable_39' || 'roamfrofachdbtable_04' || 'roamfrorachdbtable_05' || 'roamfropchdbtable_02' || 'roamfrohsdschdbtable_01' || 'roamfroeuldbtable_02' || 'roamfromulticarrierdbtable_00' || 'roamfroexternalgsmnetworkdbtable_04' || 'roamfroexternalgsmcelldbtable_06' || 'roamfroexternalutrancelldbtable_11' || 'roamfroutranrelationdbtable_04' || 'roamfrogsmrelationdbtable_04' || 'roamfrocoveragerelationdbtable_01' || 'roamfrodchmapdbtable_00' || 'roamfroupgradehistorydbtable_00' || 'otherloadername_01' || 'mtp3b_sa_frotable_r7' |+--------------------------------------------+Query Done: 270 records selectedSQL>

Using regexp matching in the table name

OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> select * from pgm

110218-08:42:39 OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip 8.0s RNC_NODE_MODEL_M_1_65 stopfile=/tmp/17200Component sqlc (V08.04.0000/SOLARIS-sparc)Copyright (C) 1994-2010 by Enea Software ABSQL> SQL> Including File '/net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/tempfiles/20110218-083926_17162/sqlcmd17200.sql'


SQL> select * from csfanpgmresource;Include Done

+------+--------------+------------+--------------+----------+--------+| id | xpinstanceid | startstate | pno | prev | nextid |+------+--------------+------------+--------------+----------+--------+| 1 | 1 | 'ENABLED' | 'CXC1726225' | 'R70A04' | 5 || 2 | 2 | 'ENABLED' | 'CXC1726225' | 'R70A04' | 5 || 3 | 3 | 'ENABLED' | 'CXC1726225' | 'R70A04' | 5 || 4 | 4 | 'ENABLED' | 'CXC1726225' | 'R70A04' | 5 |+------+--------------+------------+--------------+----------+--------+Query Done: 4 records selected

SQL> select * from cspgminstanceresource;

+------+------------------+------------+--------------+--------------+--------+| id | pgmfroinstanceid | instanceid | distribution | restartgroup | nextid |+------+------------------+------------+--------------+--------------+--------+| 1 | 13 | 0 | 0 | 0 | 443 || 2 | 14 | 0 | 0 | 0 | 443 || 3 | 15 | 0 | 65535 | 0 | 443 || 4 | 16 | 0 | 0 | 0 | 443 || 5 | 17 | 0 | 0 | 0 | 443 || 6 | 18 | 0 | 0 | 0 | 443 || 7 | 19 | 0 | 0 | 0 | 443 || 8 | 20 | 0 | 65535 | 0 | 443 || 9 | 21 | 0 | 0 | 0 | 443 || 10 | 22 | 0 | 0 | 0 | 443 |

... ...

| 435 | 617 | 1 | 0 | 0 | 443 || 436 | 617 | 2 | 1 | 0 | 443 || 437 | 618 | 1 | 0 | 0 | 443 || 438 | 618 | 2 | 1 | 0 | 443 || 439 | 619 | 1 | 0 | 0 | 443 || 440 | 619 | 2 | 1 | 0 | 443 || 441 | 620 | 1 | 0 | 0 | 443 || 442 | 620 | 2 | 1 | 0 | 443 |+------+------------------+------------+--------------+--------------+--------+Query Done: 364 records selected

SQL> select * from cspgmresource_03;


+------+---------------+------------+------------+------------+--------------+----------------+-------------------+----------+-------------------+--------+---------------------+-------------------------------------------------------------------+-------------------------+------------+--------+| id | piuinstanceid | startstate | heapsize | poolsize | restarttimer | restartcounter | pno | prev | loadclass | lmtype | funcid | loadpath | loadername | loaderinfo | nextid |+------+---------------+------------+------------+------------+--------------+----------------+-------------------+----------+-------------------+--------+---------------------+-------------------------------------------------------------------+-------------------------+------------+--------+| 1 | 1 | 'ENABLED' | 0 | 0 | 60 | 3 | 'CXC 132 1120' | 'R74G09' | 'NCH' | 0 | NULL | NULL | NULL | NULL | 624 || 2 | 1 | 'ENABLED' | 0 | 0 | 60 | 3 | 'CXC 132 1121' | 'R74G09' | 'NCH' | 0 | NULL | NULL | NULL | NULL | 624 || 3 | 1 | 'ENABLED' | 0 | 0 | 60 | 3 | 'CXC 132 1407' | 'R74G08' | 'CoreLate' | 0 | NULL | NULL | NULL | NULL | 624 || 4 | 1 | 'ENABLED' | 0 | 0 | 60 | 3 | 'CXC 132 1409' | 'R74G05' | 'CoreLate' | 0 | NULL | NULL | NULL | NULL | 624 || 5 | 1 | 'ENABLED' | 0 | 0 | 60 | 3 | 'CXC 132 2165/12' | 'R74G08' | 'CoreLate' | 0 | NULL | NULL | NULL | NULL | 624 || 6 | 1 | 'ENABLED' | 0 | 0 | 60 | 3 | 'CXC 172 1176' | 'R74G07' | 'CoreLate' | 0 | NULL | NULL | NULL | NULL | 624 || 7 | 1 | 'ENABLED' | 0 | 0 | 60 | 3 | 'CXC 172 5511' | 'R74G09' | 'CoreDeviceTest8' | 0 | NULL | NULL | NULL | NULL | 624 || 8 | 1 | 'ENABLED' | 0 | 0 | 60 | 3 | 'CXC 172 9961' | 'R74G17' |

...

| NULL | 624 || 622 | 38 | 'ENABLED' | 334000 | 0 | 60 | 3 | 'CXC 172 7621/4' | 'P6B06' | 'Application' | 0 | NULL | NULL | NULL | NULL | 624 || 623 | 41 | 'ENABLED' | 334000 | 0 | 60 | 3 | 'CXC 172 7621/4' | 'P6B06' | 'Application' | 0 | NULL | NULL | NULL | NULL | 624 |+------+---------------+------------+------------+------------+--------------+----------------+-------------------+----------+-------------------+--------+---------------------+-------------------------------------------------------------------+-------------------------+------------+--------+Query Done: 550 records selected

SQL> select * from ipcppgmfrotable_02;

+----------+---------+---------+-----------+----------------+------------+-------------------------------------------+----------------+-----------------+| pgmfroid | frotype | bhfroid | loadclass | loadmoduletype | startstate | loadpath | productnumber | productrevision |+----------+---------+---------+-----------+----------------+------------+-------------------------------------------+----------------+-----------------+| 1 | 2568 | 1 | 400 | 1 | 1 | '/c/loadmodules_norepl/CXC1725371_R74G02' | 'CXC 172 5371' | 'R74G02' || 2 | 2568 | 1 | 400 | 1 | 1 | '/c/loadmodules_norepl/CXC1728951_R74G03' | 'CXC 172 8951' | 'R74G03' || 3 | 2568 | 1 | 500 | 4 | 1 | '/c/loadmodules_norepl/CXC1729758_R73F02' | 'CXC 172 9758' | 'R73F02' |


...

9758' | 'R73F02' || 13 | 2568 | 5 | 400 | 1 | 1 | '/c/loadmodules_norepl/CXC1725371_R74G02' | 'CXC 172 5371' | 'R74G02' || 14 | 2568 | 5 | 400 | 1 | 1 | '/c/loadmodules_norepl/CXC1728951_R74G03' | 'CXC 172 8951' | 'R74G03' || 15 | 2568 | 5 | 500 | 4 | 1 | '/c/loadmodules_norepl/CXC1729758_R73F02' | 'CXC 172 9758' | 'R73F02' |+----------+---------+---------+-----------+----------------+------------+-------------------------------------------+----------------+-----------------+Query Done: 15 records selected

SQL> select * from phyeqmtpgmfrotable;

+--------------+----------+------------+----------------+-----------------+-------------------------------------------+| eqmtpgmfroid | piufroid | startstate | productnumber | productrevision | path |+--------------+----------+------------+----------------+-----------------+-------------------------------------------+| 1 | 15 | 1 | 'CXC 172 0196' | 'R73F02' | '/c/loadmodules_norepl/CXC1720196_R73F02' || 2 | 15 | 1 | 'CXC 172 0302' | 'R73F02' | '/c/loadmodules_norepl/CXC1720302_R73F02' || 3 | 15 | 1 | 'CXC 172 0369' | 'R73F03' | '/c/loadmodules_norepl/CXC1720369_R73F03' || 4 | 15 | 1 | 'CXC 172 1273' | 'R73F03' | '/c/loadmodules_norepl/CXC1721273_R73F03' || 5 | 32 | 1 | 'CXC 172 0196' | 'R73F02' | '/c/loadmodules_norepl/CXC1720196_R73F02' || 6 | 32 | 1 | 'CXC 172 0302' | 'R73F02' | '/c/loadmodules_norepl/CXC1720302_R73F02' || 7 | 32 | 1 | 'CXC 172 0369' | 'R73F03' | '/c/loadmodules_norepl/CXC1720369_R73F03' || 8 | 32 | 1 | 'CXC 172 1273' | 'R73F03' | '/c/loadmodules_norepl/CXC1721273_R73F03' |+--------------+----------+------------+----------------+-----------------+-------------------------------------------+Query Done: 8 records selected

SQL> select * from spppgmresource_02;

+------+---------------+----------+------------+------------+----------+----------------+-----------------+-------------------+--------+| id | spminstanceid | lmtype | startstate | heapsize | poolsize | productnumber | productrevision | loadclass | nextid |+------+---------------+----------+------------+------------+----------+----------------+-----------------+-------------------+--------+| 1 | 32768 | 'SPLM' | 'ENABLED' | 0 | 0 | 'CXC1325827' | 'R74G16' | 'CoreOS' | 539 || 2 | 32768 | 'FPGALM' | 'ENABLED' | 0 | 0 | 'CXC1731205' | 'R71A01' | 'CoreDevice' | 539 || 3 | 32768 | 'SPLM' | 'ENABLED' | 0 | 0 | 'CXC1327870' | 'R74G06' | 'NCH' | 539 || 7 | 32769 | 'SPLM' | 'ENABLED' | 0 | 0 | 'CXC1325827' | 'R74G16' | 'CoreOS' | 539 || 8 | 32769 | 'FPGALM' | 'ENABLED' | 0 | 0 | 'CXC1731205' | 'R71A01' | 'CoreDevice' | 539 || 11 | 32770 | 'SPLM' | 'ENABLED' | 0 | 0 | 'CXC1325827' | 'R74G16' | 'CoreOS' | 539 || 12 | 32770 | 'FPGALM' | 'ENABLED' | 0 | 0 | 'CXC1731205' | 'R71A01' | 'CoreDevice' | 539 || 16 | 32771 | 'SPLM' | 'ENABLED' | 0 | 0 | 'CXC1325827' | 'R74G16' | 'CoreOS' | 539 || 17 | 32771 | 'FPGALM' | 'ENABLED' | 0 | 0 | 'CXC1731205' | 'R71A01' | 'CoreDevice' | 539 || 21 | 32772 | 'SPLM' | 'ENABLED' | 0 | 0 | 'CXC1325827' | 'R74G16' | 'CoreOS' | 539 || 22 | 32772 | 'FPGALM' | 'ENABLED' | 0 | 0 | 'CXC1731205' | 'R71A01' | 'CoreDevice' | 539 || 26 | 32773 | 'SPLM' | 'ENABLED' | 0 | 0 | 'CXC1325827' | 'R74G16' | 'CoreOS' | ... ...... ... | 538 | 32837 | 'SPLM' | 'ENABLED' | 0 | 0 | 'CXC1727629/4' | 'P6B07' | 'Application' | 539 |


+------+---------------+----------+------------+------------+----------+----------------+-----------------+-------------------+--------+Query Done: 342 records selected

SQL> select * from sppspupgmresource_02;

+------+---------------+----------+------------+---------------+-----------------+--------+| id | spuinstanceid | lmtype | startstate | productnumber | productrevision | nextid |+------+---------------+----------+------------+---------------+-----------------+--------+| 1 | 1 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 2 | 2 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 3 | 3 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 4 | 4 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 5 | 5 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 6 | 6 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 7 | 7 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 8 | 8 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 9 | 9 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 10 | 10 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 11 | 11 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 12 | 12 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 13 | 13 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 || 14 | 14 | 'FPGALM' | 'ENABLED' | 'CXC1327680' | 'R60AK12' | 15 |+------+---------------+----------+------------+---------------+-----------------+--------+Query Done: 14 records selectedSQL>

OFFLINE_RNC74_DCG_20101204_121112_DURINGFAULT.ZIP> dbc

110118-14:14:22 OFFLINE_RNC74_DCG_20101204_121112_duringfault.zip 8.0r RNC_NODE_MODEL_M_1_65 stopfile=/tmp/16920

==============================================================================Database Consistency Check for node: , ip=137.58.194.74, mom=RNC_M_1_65, up=CXP9014711/4_P6B03 W11BFile: exercises/RNC3820/RNC74/RNC74_DCG_20101204_121112_duringfault.zip============================================================================== 1) MAOs with non-recommended characters in the MAO name (recommended range: -_/.A-Za-z0-9!%:*): NO------------------------------------------------------------------------------ 2) MAOs with dangerous characters in the MAO name `,=¤^"|'Â (HL11572/UABtr75948): NO------------------------------------------------------------------------------ 3) MAOs without FROs: NO------------------------------------------------------------------------------ 4) FROs without MAOs: NO------------------------------------------------------------------------------ 5) MAOs with duplicate LDN: NO------------------------------------------------------------------------------


6) MAOs with duplicate froId: NO------------------------------------------------------------------------------ 7) Mismatch between number of MAO and FRO instances: NO------------------------------------------------------------------------------ 8) MAOs referring to non-existent MAOs: NO------------------------------------------------------------------------------ 9) MAOs defined under a different parent than FRO: NO------------------------------------------------------------------------------ 10) Inconsistent MO references between MAO and FRO: NO------------------------------------------------------------------------------ 11) MAOs missing from reservedBy list: NO------------------------------------------------------------------------------ 12) MAOs found only in reservedBy list: NO------------------------------------------------------------------------------ 13) Inconsistent sequence of moRefs in MAO: NO------------------------------------------------------------------------------ 14) FROs referring to non-existent FROs (CSR1473974): NO------------------------------------------------------------------------------ 15) Remaining old FRO table versions (HL93894/WRNae89948/HM76376): NO------------------------------------------------------------------------------ 16) Corrupted MAO entries in modata table: NO------------------------------------------------------------------------------ 17) MTP3 pointCode collision (WRNae82362, SCS695737): NO------------------------------------------------------------------------------ 18) Inconsistency in UtranRelation nodeRelationType or frequencyRelationType (WRNae68940/WRNae72810): NO------------------------------------------------------------------------------ 19) Inconsistency in UtranCell interFreqRelCntr or intraFreqRelCntr (WRNae68940/WRNae72810): NO------------------------------------------------------------------------------

Conclusion: the database is OK

7 NODE INVENTORY COMMANDS

7.1 CPP HW architecture

7.1.1 Board types

Board type FunctionalityGPB (General Purpose Board) Control plane processing, administration of node resources (MAO/FRO)SCB (Switch Control Board) ATM backplane switching, ISL termination (Inter Subrack Links), distribution of power (-

48 V), distribution of system clock.SXB (Switch Extension Board) Provide additional ports for ISL termination.


CMXB (Ethernet Switch Module Board - High Performance Subrack only)

IP backplane switching, ESL termination (Ethernet Subrack Links).

TUB (Timing Unit Board) Generation of system clock (19.44 MHz)ET-ATM (Exchange Terminal Boards for ATM) Handles SDH/PDH, TDM, ATM, IMA. ET-IP (Exchange Terminal Board for IP) Handles Ethernet, IP, TCP, UPD, RLP.SPB (Special Purpose Board) User plane processing in RNCMSB (Media Stream Board) User plane processing in MGW.CBU (Control Base Unit) A combined GPB + TUB + SCB + ETB. Used in RBS.RAX/TX (Receiver/Transmitter) Baseband processing in RBSDU (Digital Unit) A CBM (Control Base Module, equivalent to CBU) combined with Baseband HW. Used

in RBSRU (Radio Unit) RF processing in RBS

7.1.2 Processor types

- Main Processors (MP), for control plane processing and high level tasks. Found in GPB, CBU, DU.- Board processors (BP), administration of devices and user plane processing- Device Processors (SPU, SPM, DSP, FPGA, GCPU, etc) for user plane processing.- Auxiliary Processor (XP), found in auxiliary units such as fans and radio units

More information on Processor types: CPP Product description 1551-CSX10109/7

Usually the MP is located on its own in a GPB but it can also be found together with devices in a CBU or a DU.The BP is usually located on a device board.

Examples:


GPB

MP

SCB/SXB BP

ATM Switch

SPB

BP

SPU

SPM

SPM

SPM

TUB BP

Timing device

ETB BP

Exch. Term. device

CBU

MP

ATM Switch

Timing Dev

Exch. Term.

DUW

MP

TXM/RXM

Timing Dev

Exch. Term.

DUL

MP

GCPUs

Timing Dev

Exch. Term.

RU XP

Radio Dev

7.1.3 Subrack structure

A CPP node contains from 1 to 6 Subracks.Node type A = 1 subrack, B = 2 subracks, ...., F = 6 subracks.Each Subrack can contain 28 slots (except in RBS which has smaller subracks).Each Slot can contain one PlugInUnit. Some Slots contain no PlugInUnit (a dummy board is inserted). Some Slots are used by their neighbour’s PlugInUnit (e.g. ET-MC41 boards is 2 Slots wide).

Subracks for large nodes (e.g. RNC/MGW/RXI)


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Standard Subrack Output power 800 W (1x48V) ATM backplane Used by:

- RNC3810 - RXI - MGW GMP v2/v3 - WRBS v3 (3102/3202)

SC

B

SC

B

TU

B

TU

B

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

SC

B-T

F

SC

B-T

F

TU

B

TU

B

CM

XB

CM

XB

High Performance Subrack: Output power 1600W (2x48V) or 2400W (3x48V) Dual backplane ATM/Ethernet Used by: - RNC3820 - MGW GMP v4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

SC

XB

CM

XB

CM

XB

SC

XB

EGEM2 Subrack: Output power 2400W (3x48V) Ethernet Backplane Used by: - EvoController

Subracks for RBS nodes


1 2 Radio Subrack, RBS 6000: No backplane DU replaces SCB/TUB/GPB/ET-ATM/ET-IP/RAX/TX Each slot can fit : one RU , or one DUW, or two DUL/DUG Used by: RBS 6000 (WRBS v6, ERBS)

DU

/RU

DU

/RU

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Digital Subrack, RBS 4b “flex” 24 slots. ATM backplane CBU replaces SCB/TUB/GPB/ET-ATM Used by: RBS 3106/3206

CB

U

CB

U

RU

IF

RU

IF

1 ..... 4/6/9/12 Digital Subrack, RBS 4b “compact” 4 to 12 slots. ATM backplane Used by: 3116/3216/3412/3418/etc...

CB

U

RU

IF/O

BIF

............

3 4

DU

/RU

DU

/RU

5 6

DU

/RU

DU

/RU

7

DU

/RU

7.1.4 Inter Subrack connections

Connections within the subrack are switched by the SCB boards, located at each extremity of the subrack.Connections between main subrack and extension subrack are carried over the ISL (Inter Subrack Link).The ISL’s carry Control plane, User plane, and Timing signals.The ISL’s are terminated in an SCB or SXB.TUB are found only in main subrack and the clock signals are carried to the other subracks over ISL.Each SCB/SXB pair can connect up to 4 ISL but it is recommended to only use two ports on each SCB/SXB pair in order to get the maximum available bandwidth out of each ISL (~ 600 Mbps total bandwidth on one SCB/SXB output).The ISL is a redundant bus active + standby. SCB’s and SXB’s work in pair, one active and one standby.


The maximum node size is 6 subracks (one main and 5 extension).

Node Type A B C D E FNr of Subracks 1 2 3 4 5 6

Example RNC:

An RNC F-node cabinet with one main subrack and 5 extension subracks. The first two extension subracks connect into the SCB pair of the main surbrack.The next three extension subracks connect into one SXB pair.Each SCB/SXB has a total capacity of 600 Mbps. Extension Subracks 1 and 2 are connected to SCB 0/1. ISL-1 and ISL-2 have capacity of 300 MbpsExtension Subracks 3, 4, 5 are connected to SXB 2/3. ISL-3,4,5 have capacity of 200 Mbps

(Note: in MGW, 4 ISL are used for each extension subrack, giving a bandwidth of 1.2 Gbps)


Main Subrac k

ExtSubrack 1

ISL-1

ISL-2

ISL-3

ISL-4

SCB pair (slot 1/28)

SXB pair (slot 2/3)

SCB pair

ExtSubrack 2

SCB pair

ExtSubrack 3

SCB pair

ExtSubrack 4

SCB pair

TUB pair (slot 4/5)

ExtSubrack 5

SCB pair

ISL-5

Central MP pair (slot 10/11)

MoShell

Example RBS 3000 Example RBS 6000


Baseband Subrack

RUIF/ OBIF

CBU

MoShell

Radio Subrack

RU

RU

RU

Power/Fan Subrack

PSU

BFU

Fan

Radio Subrack

DUW/ DUL

MoShell

RU

RU

RU

Power/Fan Subrack

PSU

BFU

Fan

7.1.5 Internal addressing of the processors

Each processor has a unique address (the link handler, LNH) to identify its position in the node.The address consists of the following three fields:

- Subrack Module Number (SMN): the subrack in which the processor is located. Can take values 0 to 99 as well as A0 to A9.- AtmSwitchCore Port Number (APN): the slot in which the processor is located. Can take values 0 to 27.- Execution Resource Number (ERN): to distinguish between several processors that are located in the same slot.


02 14 00 SMN

(SwitchModuleNumber =Subrack Position)

APN (AtmswitchPortNumber

=Slot Position)

ERN (ExecutionResourceNumber

=Processor Position)

Link Handler value (LNH)

SMN value:The main subrack always has SMN=00.The SMN value of each extension subrack depends on which pair of slots it connects to in the main subrak. It can be calculated with the formula: SMN= 8 * int(APN/2) + islport where APN is the APN of the SCB/SXB and islport is the port number in SCB/SXB (islport=1 to 4)Example:


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 0

SCB

SCB

SCB

SCB

SXB

TUB

TUB S

XB

SCB

SCB

MAIN SUBRACK SMN=0

EXT. SUBRACK SMN=8 * 0/2 + 1=1

EXT. SUBRACK SMN=8*16/2 +2 =66

SCB

SCB

EXT. SUBRACK SMN=8*16/2 +1 =65

Note: HW of revision CPP2/CPP3 does not support SMN addresses A0 to A9APN of SCB/SXB in main subrack

SCB/SXB SMN of extension subrack


0/1 SCB 1 to 42/3 SXB 9 to 124/5 reserved for TUB N/A6/7 SXB 25 to 288/9 SXB 33 to 2610/11 SXB 41 to 4412/13 SXB 49 to 5214/15 SXB 57 to 6016/17 SXB 65 to 6818/19 SXB 73 to 7620/21 SXB 81 to 8422/23 SXB 89 to 9224/25 SXB 97 to 99, A026/27 SXB A5 to A9

Note: in the EvoController there are no ISL connections so the SMN is defined by a dip switch inserted into the subrack.

APN value:

The APN value is identical to the slot number except for the last slot on the right which usually has APN=00 (except on certain subracks such as the EGEM2 where it has the value 28). Example in a 28-slot subrack:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 0

SCB

SCB

Slot Number

APN

Note: in the EvoController there is no ATM backplane so the last slot has APN 28, not 0.

ERN value:The ERN value is always 00 for the MP/BP processor and 1 to 99 for the device processors.


7.2 HW/SW mapping to MO

ManagedElement

SwManagement

Equipment

Subrack

Slot

PlugInUnit (GPB)

Program

LoadModule

Program Program

Slot

PlugInUnit (ETB)

Program Program

Program

ExchangeTerm

Program Program

Slot

PlugInUnit (SPB)

Program Program

Program

Spm

Program Program

Spm

Program Program

Spm

Program Program

LoadModule LoadModule

LoadModule LoadModule

PiuType PiuType

PiuType PiuType

MO Class HW/SW resourceSubrack SubrackSlot SlotPlugInUnit Board + MP/BP Spm SPM deviceSpu SPU deviceExchangeTerminal ET-ATM deviceExchangeTerminalIp ET-IP deviceAuxPlugInUnit XP boardTimingUnit TU deviceRaxDeviceGroup, TxDeviceGroup, TrxDeviceGroup

DSP device

MsDeviceGroup MSP deviceProgram Program running in

processorLoadmodule SW file on harddiskPiuType HW type descriptor


The subrack MO shows the HW information of the subrack (administrativeProductData) as well as the backplane (operationalProductData)

RNC1> get subrack=ms

=================================================================================================================1265 Equipment=1,Subrack=MS=================================================================================================================SubrackId MSadministrativeProductData Struct{5} >>> 1.productNumber = 2/BFD 742 2018 >>> 2.productRevision = R1A >>> 3.productName = Subrack >>> 4.productInfo = Cello 2 HW >>> 5.productionDate = 01W05cabinetPosition 1numberOfSlots 28operationalProductData Struct{5} >>> 1.productName = BACKPLANE >>> 2.productNumber = ROJ 605 107/3 >>> 3.productRevision = R1A >>> 4.serialNumber = X911031272 >>> 5.productionDate = 20050923productType HWsubrackPosition 1BsubrackType 0 (HUB)switchModule SwitchModule=MSuserLabel MS=================================================================================================================Total: 1 MOs

The SwitchModule MO represents the ATM switch

RNC1> get switchmodule=ms

=================================================================================================================2597 SwitchFabric=1,SwitchModule=MS=================================================================================================================SwitchModuleId MS


activeSwitchPlane 0 (SWITCH_PLANE_A)administrativeState 1 (UNLOCKED)administrativeStateSwitchPlaneA 1 (UNLOCKED)administrativeStateSwitchPlaneB 1 (UNLOCKED)availabilityStatus 0 (NO_STATUS)availabilityStatusSwitchPlaneA 0 (NO_STATUS)availabilityStatusSwitchPlaneB 0 (NO_STATUS)operationalState 1 (ENABLED)operationalStateSwitchPlaneA 1 (ENABLED)operationalStateSwitchPlaneB 1 (ENABLED)reservedBy [1] = >>> reservedBy = Equipment=1,Subrack=MSsecondSmnEvaluation 0switchModuleNumber 0userLabel =================================================================================================================Total: 1 MOs

Mapping of Subrack number to SMN:

RNC-F> hget switchmodule switchmodulenumber|smn

=================================================================================================================MO secondSmnEvaluation switchModuleNumber=================================================================================================================SwitchModule=MS 0 0 SwitchModule=ES-5 9 9 SwitchModule=ES-4 12 12 SwitchModule=ES-3 11 11 SwitchModule=ES-2 2 2 SwitchModule=ES-1 1 1 =================================================================================================================Total: 6 MOs

The Slot MO shows the actual HW that has been installed in the slot RNC1> lget ms,slot=14$

=================================================================================================================


15 Equipment=1,Subrack=MS,Slot=14=================================================================================================================SlotId 14productData Struct{5} >>> 1.productName = GPB3 >>> 2.productNumber = ROJ1192106/3 >>> 3.productRevision = R2H >>> 4.serialNumber = TU81887852 >>> 5.productionDate = 03W39reservedBy [10] = >>> reservedBy = SwManagement=1,ReliableProgramUniter=ans_aal2distncc_12_1 >>> reservedBy = SwManagement=1,ReliableProgramUniter=ans_aal2ap_12_1 >>> reservedBy = SwManagement=1,ReliableProgramUniter=act_aal2_rh_1 >>> reservedBy = SwManagement=1,ReliableProgramUniter=ans_aal2cpsrc_12_1 >>> reservedBy = SwManagement=1,ReliableProgramUniter=rnc_dh_1 >>> reservedBy = SwManagement=1,ReliableProgramUniter=rnc_ue_1 >>> reservedBy = SwManagement=1,ReliableProgramUniter=rnc_mod_om_1 >>> reservedBy = SwManagement=1,ReliableProgramUniter=rnc_cell_1 >>> reservedBy = SwManagement=1,ReliableProgramUniter=rnc_load_ctrl_1 >>> reservedBy = SwManagement=1,SwAllocation=GPB_ModuleslotNumber 14slotState 1 (used)upgradeGroupId 1upgradeGroupTypeName ModuleuserLabel =================================================================================================================Total: 1 MOs

Mapping of Slot number to APN:

RNC10> fget slot asciportnumber

=================================================================================================================MO Attribute Value=================================================================================================================Subrack=MS,Slot=28 asciportnumber 0Subrack=MS,Slot=27 asciportnumber 27Subrack=MS,Slot=26 asciportnumber 26Subrack=MS,Slot=25 asciportnumber 25Subrack=MS,Slot=24 asciportnumber 24Subrack=MS,Slot=23 asciportnumber 23


Subrack=MS,Slot=22 asciportnumber 22Subrack=MS,Slot=21 asciportnumber 21Subrack=MS,Slot=20 asciportnumber 20Subrack=MS,Slot=19 asciportnumber 19Subrack=MS,Slot=18 asciportnumber 18Subrack=MS,Slot=17 asciportnumber 17Subrack=MS,Slot=16 asciportnumber 16Subrack=MS,Slot=15 asciportnumber 15Subrack=MS,Slot=14 asciportnumber 14Subrack=MS,Slot=13 asciportnumber 13Subrack=MS,Slot=12 asciportnumber 12Subrack=MS,Slot=11 asciportnumber 11Subrack=MS,Slot=10 asciportnumber 10Subrack=MS,Slot=9 asciportnumber 9Subrack=MS,Slot=8 asciportnumber 8Subrack=MS,Slot=7 asciportnumber 7Subrack=MS,Slot=6 asciportnumber 6Subrack=MS,Slot=5 asciportnumber 5Subrack=MS,Slot=4 asciportnumber 4Subrack=MS,Slot=3 asciportnumber 3Subrack=MS,Slot=2 asciportnumber 2Subrack=MS,Slot=1 asciportnumber 1=================================================================================================================Total: 28 MOs

The PlugInUnit MO shows what HW has been configured for that slot. If the configured HW does not match the actual HW, the board cannot come up. Note: The Plug And Play functionality is however able to correct this if the configured HW is of the same functionality as the actual HW.

RNC1> lget Subrack=MS,Slot=14,PlugInUnit=1$

=================================================================================================================235 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1=================================================================================================================PlugInUnitId 1administrativeState 1 (UNLOCKED)allowedSeqRestarts 3 (RESTARTS_WITH_WARM)availabilityStatus 0 (NO_STATUS)greenLed 3 (STEADY_LIGHT)hwTestResult 2010-01-19 06:30:42 Others No Test ResultshwTestStatus 0 (NO_TEST_RESULTS)interruptState 4


operationalState 1 (ENABLED)piuGroupNumber 2piuType PiuType=ROJ1192106/53_R2productType HWredLed 2 (OUT)yellowLed 2 (OUT)=================================================================================================================

RNC1> get PiuType=ROJ1192106/3_R2

=================================================================================================================768 SwManagement=1,PiuType=ROJ1192106/3_R2=================================================================================================================PiuTypeId ROJ1192106/3_R2boardWidth 3defAllowedSeqRestarts 3 (RESTARTS_WITH_WARM)productData Struct{5} >>> 1.productNumber = ROJ1192106/3 >>> 2.productRevision = R2 >>> 3.productName = GPB3 >>> 4.productInfo = >>> 5.productionDate = reservedBy [49] = ..... >>> reservedBy = SwManagement=1,Repertoire=RNC_XV1_TO_ZAF_AUE >>> reservedBy = SwManagement=1,Repertoire=RNC_XV2_TO_ZAF_AUE >>> reservedBy = SwManagement=1,Repertoire=RNC_ZAE_TO_ZAF_AUE >>> reservedBy = SwManagement=1,Repertoire=RNC_ZAF_TO_ZAF_AUErole 1 (mp)userLabel =================================================================================================================Total: 1 MOs

Under the PlugInUnit MO we can find various device MOs. Examples:

RNC1> lget Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1$

=================================================================================================================659 Equipment=1,Subrack=MS,Slot=10,PlugInUnit=1,ExchangeTerminal=1


=================================================================================================================ExchangeTerminalId 1availabilityStatus 0 (NO_STATUS)description Struct{5} >>> 1.aal2LayerDescription = This board provides a maximum of 128 AAL2 multiplexers per port. The board does not support QOS separation within one and the same AAL2 path >>> 2.atmLayerDescription = This board provides a maximum of 48VP connections and 1800 VC connections. 750 of these can be used for connections with service category UBR+. The board supports up to 256 bidirectional PM F4/F5 PM measurement per physical port The board does not support >>> 3.etType = ET-M4 >>> 4.physicalLayerDescription = This board provides 2 physical STM-1 ports that can be configured for unchannalised ATM in either ETSI/ANSI or TTC mode. >>> 5.tdmSupport = This board does not support TDM switching or circuit emulationoperationalState 1 (ENABLED)userLabel =================================================================================================================Total: 1 MOs

RNC1> lget Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1

=================================================================================================================480 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1=================================================================================================================SpmId 1asciPortNumber 19availabilityStatus 0 (NO_STATUS)executionResourceNumber 16installedResourceIdList i[25] = 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 operationalState 1 (ENABLED)reservedBy [2] = >>> reservedBy = Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=1,PdrDevice=1 >>> reservedBy = TransportNetwork=1,Aal5TpVccTp=pg191arunningResourceIdList i[25] = 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 spLinkName sp0.lnhswitchModuleNumber 0userLabel =================================================================================================================Total: 1 MOs

Program/Loadmodule MOs:


- A program MO represents the SW file when it’s loaded in the RAM memory of a processor. One MO instance for each processor that it’s running on. - A loadmodule MO represents the SW file on disk. Only one MO instance per revision of a LM, pointing to the file on /c - Several Programs (running in different boards) can be connected to the same Loadmodule.

RNC10> pr cxc1321447_r50hx06

===================================================================================Proxy MO=================================================================================== 175 Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1321447_R50HX06 191 Equipment=1,Subrack=MS,Slot=17,PlugInUnit=1,Program=CXC1321447_R50HX06 208 Equipment=1,Subrack=MS,Slot=16,PlugInUnit=1,Program=CXC1321447_R50HX06 227 Equipment=1,Subrack=MS,Slot=15,PlugInUnit=1,Program=CXC1321447_R50HX06 252 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1321447_R50HX06 266 Equipment=1,Subrack=MS,Slot=13,PlugInUnit=1,Program=CXC1321447_R50HX06 290 Equipment=1,Subrack=MS,Slot=12,PlugInUnit=1,Program=CXC1321447_R50HX06 337 Equipment=1,Subrack=MS,Slot=11,PlugInUnit=1,Program=CXC1321447_R50HX06 356 Equipment=1,Subrack=MS,Slot=10,PlugInUnit=1,Program=CXC1321447_R50HX06 406 Equipment=1,Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1321447_R50HX06 418 Equipment=1,Subrack=MS,Slot=8,PlugInUnit=1,Program=CXC1321447_R50HX06 1122 SwManagement=1,LoadModule=CXC1321447_R50HX06===================================================================================Total: 12 MOs

RNC10> lget Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1321447_R50HX06

=================================================================================================================175 Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1,Program=CXC1321447_R50HX06=================================================================================================================ProgramId CXC1321447_R50HX06heapSize 0loadModule LoadModule=CXC1321447_R50HX06operationalState 1 (ENABLED)poolSize 0restartCounterLimit 3restartTimer 60startState 1 (enabled)userLabel =================================================================================================================Total: 1 MOs


RNC10> get LoadModule=CXC1321447_R50HX06

=================================================================================================================1122 SwManagement=1,LoadModule=CXC1321447_R50HX06=================================================================================================================LoadModuleId CXC1321447_R50HX06fileFormat rpdoutisDirectory falseloadModuleFilePath /c/loadmodules/CXC1321447_R50HX06loaderType 0 (OseLoader)moppletEntries s[0] = oseProgramHeapSize 0oseProgramLoadClass 10 (coreOs)oseProgramPoolSize 0otherLoaderName preLoad 0 (no)productData Struct{5} >>> 1.productNumber = CXC1321447 >>> 2.productRevision = R50HX06 >>> 3.productName = gpb_cs_basic >>> 4.productInfo = >>> 5.productionDate = 20051227programMustBeSingleton falsereliableProgramLabel reservedByUpgradePackage trueuserLabel =================================================================================================================Total: 1 MOs

Finding out which programs are running within each processor--> Each program runs in the processor under which it is defined in the MO tree.

Here we have 16 programs defined in the MP

RNC1> lpr ms,slot=14

===================================================================================Proxy MO===================================================================================


234 Equipment=1,Subrack=MS,Slot=14 235 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1 236 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=aal2ap_12 237 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=nsssyci_mpbp 238 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1320787_R50HX02 239 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=aal5_term_mp 240 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329859_R4J07 241 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=spas_connect 242 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=aal2cpsrc_12 243 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329856_R4J10 244 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=aal2distncc_ 245 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329857_R4J14 246 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=usaal_term 247 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329858_R4J09 248 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1322812_R50HX01 249 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=aal2_rh 250 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1321447_R50HX06 251 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329850_R4J10 252 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,GeneralProcessorUnit=1 253 Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1,GeneralProcessorUnit=1,LoadControl=1===================================================================================Total: 20 MOs

Here we have 5 programs defined in the BP and 1 program defined in the device

RNC1> lpr ms,slot=6

===================================================================================Proxy MO=================================================================================== 443 Equipment=1,Subrack=MS,Slot=6 444 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1 445 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,Program=etm4atm 446 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,Program=phym4bp 453 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,Program=CXC1321451_R50HX06 454 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,Program=nsssyci_mpbp 455 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,Program=CXC1322025_R50HX01 447 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1 448 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Program=amd_m4_fpga 449 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2 450 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=2,Vc4Ttp=1 451 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1 452 Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1,Vc4Ttp=1===================================================================================


Total: 13 MOs

Here we have 7 programs defined in the BP, 1 program in the SPU, 4 programs in SPM 1, 3 programs in SPM 2/3/4/5.

RNC37> lpr subrack=ms,slot=19.*program

===================================================================================Proxy MO=================================================================================== 279 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1322250_R51DX04 280 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1327672_R51DL06 281 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1329862_R9H01 282 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1327705_R51DX03 283 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1325702_R51DX03 284 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1321121_R51K02 285 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1325704_R51DX03 287 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Program=CXC1324129/1_R4C01 289 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=5,Program=CXC1329863/3_R9H04 290 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=5,Program=CXC1325911_R1F01 291 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=5,Program=CXC1325827_R51DX01 293 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=4,Program=CXC1325827_R51DX01 294 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=4,Program=CXC1325911_R1F01 295 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=4,Program=CXC1329863/3_R9H04 297 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=3,Program=CXC1329863/3_R9H04 298 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=3,Program=CXC1325911_R1F01 299 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=3,Program=CXC1325827_R51DX01 301 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=2,Program=CXC1325827_R51DX01 302 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=2,Program=CXC1329864_R9H05 303 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=2,Program=CXC1325911_R1F01 305 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1,Program=CXC1329865_R9H03 306 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1,Program=CXC1325911_R1F01 307 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1,Program=CXC1325827_R51DX01 308 Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1,Program=CXC1327870_R51DL05===================================================================================Total: 41 MOs

Here we have 4 programs in the BP and 17 programs in the MSP’s.

MGW1> lpr 3,slot=7

===================================================================================Proxy MO=================================================================================== 514 Equipment=1,Subrack=3,Slot=7


515 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1 516 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1 517 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_6_IM 518 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_2_MFD 519 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_10_MFD 520 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_15_CSD_Modem 521 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_4_MFD 522 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_1_MFD 523 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_12_MFD 524 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=ALBIN 525 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_9_MFD 526 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_7_MFH_UP 527 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_3_MFD 528 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_8_CSD_GSM_MFH 529 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_11_MFD 530 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_14_CSD_Digital 531 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_5_MPC 532 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_13_CSD_Digital 533 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=DSP_16_Fax 534 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,Program=nsssyci_mpbp 535 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,Program=dbm2_cs_basic 536 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,Program=bpmpp_msb31 537 Equipment=1,Subrack=3,Slot=7,PlugInUnit=1,Program=bpbas_msb31===================================================================================Total: 24 MOs

Checking HW/SW state

RNC1> st plug

===================================================================================Proxy Adm State Op. State MO=================================================================================== 9 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=28,PlugInUnit=1 20 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=26,PlugInUnit=1 159 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=24,PlugInUnit=1 297 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=23,PlugInUnit=1 335 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=22,PlugInUnit=1 373 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=21,PlugInUnit=1 411 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=20,PlugInUnit=1 449 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1 487 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=18,PlugInUnit=1 499 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=17,PlugInUnit=1 511 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=16,PlugInUnit=1


531 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=15,PlugInUnit=1 551 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=14,PlugInUnit=1 571 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=13,PlugInUnit=1 591 1 (UNLOCKED) 0 (DISABLED) Equipment=1,Subrack=MS,Slot=12,PlugInUnit=1 611 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=11,PlugInUnit=1 660 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=10,PlugInUnit=1 709 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=9,PlugInUnit=1 721 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=8,PlugInUnit=1 733 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=7,PlugInUnit=1 744 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=6,PlugInUnit=1 755 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=5,PlugInUnit=1 769 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1 783 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=3,PlugInUnit=1 790 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=2,PlugInUnit=1 797 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=1,PlugInUnit=1===================================================================================Total: 26 MOs

RNC1> lst ms,slot=19

===================================================================================Proxy Adm State Op. State MO=================================================================================== 449 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1 450 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1325704_R3V02 451 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1328837_R8BG02 452 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1325702_R3AA01 453 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1 454 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=3 455 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=3,DcDevice=3 456 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=3,DcDevice=2 457 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=3,DcDevice=1 458 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=2 459 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=2,CcDevice=1 460 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=1 461 1 (UNLOCKED) 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,SpbDeviceGroup=1,SpbDeviceSet=1,PdrDevice=1 462 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1 463 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Program=CXC1324129/1_R4C01 464 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=5 465 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=5,Program=CXC1325827_R4DC01 466 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=5,Program=CXC1328838/3_R8BG02 467 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=5,Program=CXC1325911_R1F01 468 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=4 469 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=4,Program=CXC1325911_R1F01 470 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=4,Program=CXC1325827_R4DC01


471 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=4,Program=CXC1328838/3_R8BG02 472 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=3 473 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=3,Program=CXC1325827_R4DC01 474 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=3,Program=CXC1325911_R1F01 475 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=3,Program=CXC1328838/3_R8BG02 476 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=2 477 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=2,Program=CXC1325827_R4DC01 478 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=2,Program=CXC1328839_R8BG02 479 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=2,Program=CXC1325911_R1F01 480 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1 481 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1,Program=CXC1325911_R1F01 482 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1,Program=CXC1325827_R4DC01 483 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Spu=1,Spm=1,Program=CXC1328840_R8BG02 484 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1322250_R11EG01 485 1 (ENABLED) Equipment=1,Subrack=MS,Slot=19,PlugInUnit=1,Program=CXC1321121_R4L01===================================================================================Total: 37 MOs

Note: the Programs do not have an administrativeState. To prevent a program from runing, the startState is set to disabled, the restart the board with restartCause=2 (piu_restart_upgrade)

RNC10> lhget ms,slot=14.*program loadmodule|state

=================================================================================================================MO loadModule operationalState startState =================================================================================================================Subrack=MS,Slot=14,PlugInUnit=1,Program=aal2ap_12 LoadModule=CXC1322417/12_R50HF01 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=nsssyci_mpbp LoadModule=CXC1321121_R50HF01 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1320787_R50HX02 LoadModule=CXC1320787_R50HX02 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=aal5_term_mp LoadModule=CXC1320995/31_R50HF01 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329859_R4J07 LoadModule=CXC1329859_R4J07 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=spas_connect LoadModule=CXC1320742_R50HC03 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=aal2cpsrc_12 LoadModule=CXC1322418/12_R50HF01 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329856_R4J10 LoadModule=CXC1329856_R4J10 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=aal2distncc_ LoadModule=CXC1322419/12_R50HX01 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329857_R4J14 LoadModule=CXC1329857_R4J14 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=usaal_term LoadModule=CXC1320997_R50HB03 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329858_R4J09 LoadModule=CXC1329858_R4J09 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1322812_R50HX01 LoadModule=CXC1322812_R50HX01 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=aal2_rh LoadModule=CXC1320993_R50HF01 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1321447_R50HX06 LoadModule=CXC1321447_R50HX06 1 (ENABLED) 1 (enabled)Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1329850_R4J10 LoadModule=CXC1329850_R4J10 1 (ENABLED) 1 (enabled)


=================================================================================================================Total: 16 MOs

Checking LED status

RNC_P6> hget plug led|state

=================================================================================================================MO administrativeState greenLed operationalState redLed yellowLed =================================================================================================================Subrack=MS,Slot=9,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 2 (OUT) Subrack=MS,Slot=8,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 2 (OUT) ...<cut>...Subrack=MS,Slot=23,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 6 (FLICKERING) Subrack=MS,Slot=22,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 6 (FLICKERING) Subrack=MS,Slot=21,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 6 (FLICKERING) Subrack=MS,Slot=20,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 6 (FLICKERING) Subrack=MS,Slot=19,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 6 (FLICKERING) ..<cut>...Subrack=MS,Slot=12,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 2 (OUT) Subrack=MS,Slot=11,PlugInUnit=1 1 (UNLOCKED) 1 (NOT_AVAILABLE) 0 (DISABLED) 1 (NOT_AVAILABLE) 1 (NOT_AVAILABLE)Subrack=MS,Slot=10,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 2 (OUT) Subrack=ES-2,Slot=28,PlugInUnit=1 1 (UNLOCKED) 3 (STEADY_LIGHT) 1 (ENABLED) 2 (OUT) 2 (OUT) ...<cut>...=================================================================================================================

OFFLINE> mom plug (green|yellow|red)led

##################################################################################################MO Class Attribute Type Flags##################################################################################################PlugInUnit greenLed enumRef:LedStatus readOnly,nonPersistent,noNotification--------------------------------------------------------------------------------------------------Indicates the operational status of the Auxiliary Plug-in Unit.The following values are possible for this attribute:NOT_AVAILABLE = The LED state is not readable at the momentSTEADY_LIGHT = Power presentSLOW_BLINK = Missing resource


FAST_BLINK = Load or test in progress**************************************************************************************************PlugInUnit redLed enumRef:LedStatus readOnly,nonPersistent,noNotification--------------------------------------------------------------------------------------------------Indicates the fault status of the Auxiliary Plug-in Unit.The following values are possible for this attribute:NOT_AVAILABLE = The LED state is not available at the momentOUT = No faultSTEADY_LIGHT = PIU fault**************************************************************************************************PlugInUnit yellowLed enumRef:LedStatus readOnly,nonPersistent,noNotification--------------------------------------------------------------------------------------------------Indicates the information status of the Auxiliary Plug-in Unit.The following values are possible for this attribute:NOT_AVAILABLE = The LED state is not available at the momentOUT = PIU unlockedSTEADY_LIGHT = PIU lockedSLOW_BLINK = Shutting-down in progressFLICKERING = BusyDefault=NOT_AVAILABLE **************************************************************************************************

OFFLINE> mom ledstatus

##################################################################################Enum Values##################################################################################LedStatus 0:NOT_APPLICABLE, 1:NOT_AVAILABLE, 2:OUT, 3:STEADY_LIGHT, 4:SLOW_BLINK, 5:FAST_BLINK, 6:FLICKERING----------------------------------------------------------------------------------Possible states for green, yellow and red LEDs. - NOT_APPLICABLE: This MO does not support LED states. - NOT_AVAILABLE: The LED state is not available at the moment. - OUT: Depends on the color of the LED. See the description of the corresponding LED status attribute. - STEADY_LIGHT: Depends on the color of the LED. See the description of the corresponding LED status attribute. - SLOW_BLINK: Depends on the color of the LED. See the description of the corresponding LED status attribute. - FAST_BLINK: Load or test in progress. - FLICKERING: The Plug-in Unit is busy.**********************************************************************************


7.3 inv command

MGW6> h inv

*******************************************************inv[hr] [<Filter>] [<stateFilter>]*******************************************************Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.

This command performs a complete HW/SW inventory via the MO interface. All SW including JVM, RPU, and Device SW (spm,dsp,fpga) is shown. Licensing (features and capacity) as well as overview of the ISL links is also shown.

The "h" option is for fetching HW information only.The first time the command is run, it takes a bit longer because the data has to be fetched from the node before parsing.The following times the command is run, the existing data is parsed again, unless the "r" switch is used ("refresh"), in which case, the data is fetched again and parsed.

The first argument (general filter) allows to only show the lines matching the filter string.The second argument (state filter) allows to only show the lines where the MO status matches the state filter.

Printout description: - the first table shows the MP/BP hardware info, position, and status. The CPU column shows the CPU load (read from pget plug load) and the GE column (when subrack contains CMXB) shows the connection status to IP backplane. The column "c/p" shows the disk usage on /c or /p (depending if it is a central MP or regular MP), and the column "/d" shows the disk usage of the /d volume. - the second table shows the XP/EP hardware/software info and status - the third table shows the subracks and backplanes HW info. The switchState field consists of three digits: the state of the switch, the state of plane A, and the state of plane B. - the fourth table shows the ISL links (only applicable in nodes containing several subracks). All ISL links connecting the main subrack to each extension subrack are shown. The status of each link is show: 1st digit corresponds to "operationalStateSync" and the 2nd digit corresponds "operationalStateTraffic". The ports connected to each ISL are shown, including the type of board (SCB/SXB) and the port state (active/passive). - the fifth and sixth table shows the list of features and capacity and their licensing status - the seventh table shows the java loadmodules that are running in the JVM. - the eigth table shows the configuration and status of the ReliableProgramUniters (RPU). - the ninth table shows the Programs running in each processor including devices.

Note: state information is always abbreviated to one digit, in the same way as for other printouts such as stt, stv, str, etc. - 1 = unlocked enabled - 0 = unlocked disabled - L = locked (opstate could be enabled or disabled)

Examples: >> inv CXC132055 --> only rows matching CXC132055 will appear. This is convenient to lookup the name of an LM and in see which boards it is running. >> inv : --> only RPU information will be printed. >> inv nss --> to see which loadmodules contain the string "nss" and in which boards they are running.


>> inv . L|0 --> only rows where the state of the MO is locked or disabled will appear. >> inv roj L|0 --> only rows matching "ROJ" and where the state is locked or disabled will appear.

The administrativeState and operationalState are combined in one digit:

Administrative State

Operational State Combined State

1 1 11 0 00 1 L0 0 L

7.3.1 Example: RNC3810 (standard subrack)

RNC11> inv

==================================================================================================================================SMN APN MOD BOARD SWALLOCATION S OPER MAINT FAULT c/p d CPU PRODUCTNUMBER REV SERIAL MO================================================================================================================================== 0 1 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R1B/A T013233829 MS,Slot=1 0 2 SXB3 SXB 1 ON OFF OFF 0% ROJ1192109/3 R1B T013501951 MS,Slot=2 0 3 SXB3 SXB 1 ON OFF OFF 0% ROJ1192109/3 R1A T013057191 MS,Slot=3 0 4 TUB2 TUB 1 ON OFF OFF 0% ROJ1192104/4 R3C TU8G213071 MS,Slot=4 0 5 TUB2 TUB 1 ON OFF OFF 0% ROJ1192104/4 R3C TU8BN72478 MS,Slot=5 0 6 ET-M4 ETM4 1 ON OFF OFF 3% ROJ1192102/1 R3G TU86206041 MS,Slot=6 0 7 ET-M4 ETM4 1 ON OFF OFF 0% ROJ1192102/1 R3G TU86205889 MS,Slot=7 0 8 GPB43 GPB_SCCP_ITU 1 ON OFF OFF 0% 43% 15% ROJ1192106/43 R2A TU86932279 MS,Slot=8 0 9 GPB43 GPB_SCCP_ITU 1 ON OFF OFF 0% 43% 0% ROJ1192106/43 R2A T013348567 MS,Slot=9 0 10 GPB43 GPB_Central_E1_ITU 1 ON OFF OFF 88% 48% 0% ROJ1192106/43 R2A T012862036 MS,Slot=10 0 11 GPB43 GPB_Central_E1_ITU 1 ON OFF OFF 88% 46% 0% ROJ1192106/43 R2A T013348677 MS,Slot=11 0 12 GPB43 GPB_OM 1 ON OFF OFF 22% 43% 14% ROJ1192106/43 R2A T012901246 MS,Slot=12 0 13 GPB43 GPB_OM 1 ON OFF OFF 0% 43% 0% ROJ1192106/43 R2A T013348672 MS,Slot=13 0 14 1 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 60% ROJ1192106/43 R2A T013348703 MS,Slot=14 0 15 13 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 59% ROJ1192106/43 R2A TU85478272 MS,Slot=15 0 16 8 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 60% ROJ1192106/43 R2A T013348671 MS,Slot=16 0 17 GPB43 GPB_RANAP_RNSAP 1 ON OFF OFF 0% 43% 28% ROJ1192106/43 R2A T013072774 MS,Slot=17 0 18 GPB43 GPB_RANAP_RNSAP 1 ON OFF OFF 0% 43% 1% ROJ1192106/43 R2A T013348643 MS,Slot=18 0 19 SPB21 SPB_TYPE_A 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013486820 MS,Slot=19 0 20 SPB21 SPB_TYPE_A 1 ON 16HZ OFF 16% ROJ1192103/41 R2A T013486817 MS,Slot=20


0 21 SPB21 SPB_TYPE_A 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013486752 MS,Slot=21 0 22 SPB21 SPB_TYPE_A 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013486753 MS,Slot=22 0 23 SPB21 SPB_TYPE_A 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013486831 MS,Slot=23 0 24 ET-M4 ETM4 1 ON OFF OFF 0% ROJ1192102/1 R3G TU82995054 MS,Slot=24 0 25 ET-M4 ETM4 1 ON OFF OFF 0% ROJ1192102/1 R3G TU83396432 MS,Slot=25 0 26 ET-M4 ETM4 1 ON OFF OFF 7% ROJ1192102/1 R3G TU81942994 MS,Slot=26 0 27 ET-MFX ETMFX12 1 ON OFF OFF 5% ROJ1192316/1 R4A A400683990 MS,Slot=27 0 0 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R2D TU8G070525 MS,Slot=28---------------------------------------------------------------------------------------------------------------------------------- 1 1 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R2C TU88999226 ES-1,Slot=1 1 2 ET-M4 ETM4 1 ON OFF OFF 0% ROJ1192102/1 R3G TU84499452 ES-1,Slot=2 1 3 ET-M4 ETM4 1 ON OFF OFF 0% ROJ1192102/1 R3G T012252236 ES-1,Slot=3 1 6 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013453236 ES-1,Slot=6 1 7 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A T013453517 ES-1,Slot=7 1 8 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 9% ROJ1192103/41 R2A T013453425 ES-1,Slot=8 1 9 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A TU86323369 ES-1,Slot=9 1 10 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A T013453168 ES-1,Slot=10 1 12 9 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 61% ROJ1192106/43 R2A T013348587 ES-1,Slot=12 1 13 2 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 61% ROJ1192106/43 R2A T013348559 ES-1,Slot=13 1 14 3 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 60% ROJ1192106/43 R2A TU85108813 ES-1,Slot=14 1 15 4 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 61% ROJ1192106/43 R2A T013415586 ES-1,Slot=15 1 16 15 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 59% ROJ1192106/43 R2A T013302037 ES-1,Slot=16 1 17 10 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 60% ROJ1192106/43 R2A T013348659 ES-1,Slot=17 1 19 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A T013453140 ES-1,Slot=19 1 20 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013453206 ES-1,Slot=20 1 21 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 9% ROJ1192103/41 R2A TU87049179 ES-1,Slot=21 1 22 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A T013453506 ES-1,Slot=22 1 23 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013453483 ES-1,Slot=23 1 25 ET-M4 ETM4 1 ON OFF OFF 8% ROJ1192102/1 R3G TU82391055 ES-1,Slot=25 1 26 ET-M4 ETM4 1 ON OFF OFF 9% ROJ1192102/1 R3G TU83291121 ES-1,Slot=26 1 27 ET-MFX ETMFX12 1 ON OFF OFF 20% ROJ1192316/1 R4A TU8G116828 ES-1,Slot=27 1 0 SCB3 SCB 1 ON OFF OFF 0% ROJ1192108/4 R2D TU8CA59098 ES-1,Slot=28---------------------------------------------------------------------------------------------------------------------------------- 2 1 SCB3 SCB 1 ON OFF OFF 0% ROJ1192108/4 R1B/A T013017092 ES-2,Slot=1 2 2 ET-M4 ETM4 1 ON OFF OFF 0% ROJ1192102/1 R3G T012011442 ES-2,Slot=2 2 3 ET-M4 ETM4 1 ON OFF OFF 0% ROJ1192102/1 R3G T012110713 ES-2,Slot=3 2 6 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A TU85962112 ES-2,Slot=6 2 7 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A T013486804 ES-2,Slot=7 2 8 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A T013486873 ES-2,Slot=8 2 9 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A T013486834 ES-2,Slot=9 2 10 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A T013486876 ES-2,Slot=10 2 12 11 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 61% ROJ1192106/43 R2A TU86224170 ES-2,Slot=12 2 13 5 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 62% ROJ1192106/43 R2A T012901249 ES-2,Slot=13 2 14 6 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 57% ROJ1192106/43 R2A T013263297 ES-2,Slot=14 2 15 7 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 59% ROJ1192106/43 R2A T013263300 ES-2,Slot=15


2 16 25 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 61% ROJ1192106/43 R2A T013348549 ES-2,Slot=16 2 17 12 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 61% ROJ1192106/43 R2A T013348651 ES-2,Slot=17 2 19 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 11% ROJ1192103/41 R2A TU85967729 ES-2,Slot=19 2 20 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A T013382494 ES-2,Slot=20 2 21 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A T013382464 ES-2,Slot=21 2 22 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 9% ROJ1192103/41 R2A T013486763 ES-2,Slot=22 2 23 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013453204 ES-2,Slot=23 2 25 ET-M4 ETM4 1 ON OFF OFF 5% ROJ1192102/1 R3G T012252275 ES-2,Slot=25 2 26 ET-M4 ETM4 1 ON OFF OFF 8% ROJ1192102/1 R3G TU83291120 ES-2,Slot=26 2 27 ET-MFX ETMFX12 1 ON OFF OFF 21% ROJ1192316/1 R4A A400680147 ES-2,Slot=27 2 0 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R1B/A T013017084 ES-2,Slot=28---------------------------------------------------------------------------------------------------------------------------------- 11 1 SCB3 SCB 1 ON OFF OFF 0% ROJ1192108/4 R1B/A T013233848 ES-3,Slot=1 11 2 ET-M4 ETM4 1 ON OFF OFF 5% ROJ1192102/1 R3G T012468707 ES-3,Slot=2 11 6 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 6% ROJ1192103/41 R2A TU87973398 ES-3,Slot=6 11 7 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 9% ROJ1192103/41 R2A TU87926912 ES-3,Slot=7 11 8 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 10% ROJ1192103/41 R2A TU87926796 ES-3,Slot=8 11 9 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A TU87926790 ES-3,Slot=9 11 10 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A TU88207006 ES-3,Slot=10 11 12 30 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 59% ROJ1192106/43 R2A T013415615 ES-3,Slot=12 11 13 31 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 62% ROJ1192106/43 R2A T013415622 ES-3,Slot=13 11 14 32 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 61% ROJ1192106/43 R2A T013302096 ES-3,Slot=14 11 15 33 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 58% ROJ1192106/43 R2A T013415552 ES-3,Slot=15 11 16 35 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 61% ROJ1192106/43 R2A T013415544 ES-3,Slot=16 11 17 34 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 60% ROJ1192106/43 R2A T013072793 ES-3,Slot=17 11 19 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 9% ROJ1192103/41 R2A TU86006428 ES-3,Slot=19 11 20 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A TU88206998 ES-3,Slot=20 11 21 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 9% ROJ1192103/41 R2A TU87267134 ES-3,Slot=21 11 22 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2C TU8B253537 ES-3,Slot=22 11 23 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A TU87973976 ES-3,Slot=23 11 26 ET-M4 ETM4 1 ON OFF OFF 8% ROJ1192102/1 R3G TU82291016 ES-3,Slot=26 11 27 ET-MFX ETMFX12 1 ON OFF OFF 19% ROJ1192316/1 R4A A400683989 ES-3,Slot=27 11 0 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R1B/A T013233889 ES-3,Slot=28---------------------------------------------------------------------------------------------------------------------------------- 12 1 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R1B/A T013233878 ES-4,Slot=1 12 2 ET-M4 ETM4 1 ON OFF OFF 4% ROJ1192102/1 R3G TU84548543 ES-4,Slot=2 12 6 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013382402 ES-4,Slot=6 12 7 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013382441 ES-4,Slot=7 12 8 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013382452 ES-4,Slot=8 12 9 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2D TU8G474674 ES-4,Slot=9 12 10 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013382444 ES-4,Slot=10 12 12 40 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 60% ROJ1192106/43 R2A TU85935308 ES-4,Slot=12 12 13 41 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 57% ROJ1192106/43 R2A T013302216 ES-4,Slot=13 12 14 42 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 57% ROJ1192106/43 R2A T013302209 ES-4,Slot=14 12 15 43 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 57% ROJ1192106/43 R2A T013302045 ES-4,Slot=15


12 16 45 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 57% ROJ1192106/43 R2A T013302084 ES-4,Slot=16 12 17 44 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 58% ROJ1192106/43 R2A T013302166 ES-4,Slot=17 12 19 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013382448 ES-4,Slot=19 12 20 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A T013453165 ES-4,Slot=20 12 21 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013382445 ES-4,Slot=21 12 22 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A TU86009215 ES-4,Slot=22 12 23 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A T013382479 ES-4,Slot=23 12 26 ET-M4 ETM4 1 ON OFF OFF 8% ROJ1192102/1 R3G TU84550683 ES-4,Slot=26 12 27 ET-MFX ETMFX12 1 ON OFF OFF 20% ROJ1192316/1 R4A TU8G476939 ES-4,Slot=27 12 0 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R1B/A T013233870 ES-4,Slot=28---------------------------------------------------------------------------------------------------------------------------------- 9 1 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R1B T013394382 ES-5,Slot=1 9 2 ET-M4 ETM4 1 ON OFF OFF 4% ROJ1192102/1 R3G TU84064509 ES-5,Slot=2 9 6 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A TU88235687 ES-5,Slot=6 9 7 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 7% ROJ1192103/41 R2A TU87926987 ES-5,Slot=7 9 8 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A TU87926979 ES-5,Slot=8 9 9 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A TU87926981 ES-5,Slot=9 9 10 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A TU88206979 ES-5,Slot=10 9 12 50 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 56% ROJ1192106/43 R2A T013415612 ES-5,Slot=12 9 13 51 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 56% ROJ1192106/43 R2A T013415613 ES-5,Slot=13 9 14 52 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 57% ROJ1192106/43 R2A T013415575 ES-5,Slot=14 9 15 53 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 56% ROJ1192106/43 R2A T013415614 ES-5,Slot=15 9 16 55 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 56% ROJ1192106/43 R2A T013415618 ES-5,Slot=16 9 17 54 GPB43 GPB_Module 1 ON OFF OFF 13% 43% 60% ROJ1192106/43 R2A T013415644 ES-5,Slot=17 9 19 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013453516 ES-5,Slot=19 9 20 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013453447 ES-5,Slot=20 9 21 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013453560 ES-5,Slot=21 9 22 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A T013453082 ES-5,Slot=22 9 23 SPB21 SPB_TYPE_B 1 ON 16HZ OFF 8% ROJ1192103/41 R2A TU86009217 ES-5,Slot=23 9 26 ET-M4 ETM4 1 ON OFF OFF 9% ROJ1192102/1 R3G T012599064 ES-5,Slot=26 9 27 ET-MFX ETMFX12 1 ON OFF OFF 22% ROJ1192316/1 R4A TU8G477001 ES-5,Slot=27 9 0 SCB3 SCB 1 ON OFF OFF 1% ROJ1192108/4 R1B T013394380 ES-5,Slot=28----------------------------------------------------------------------------------------------------------------------------------

==================================================================================================================================XPBOARD ST PRODUCTNUMBER REV SERIAL/NAME MO==================================================================================================================================FAN 1 BKV301487/1 R3A X76CE04632 Subrack=ES-1,Fan=1FAN 1 BKV301487/1 R3A X76CE64123 Subrack=ES-2,Fan=1FAN 1 BKV301487/1 R3A X76CE87170 Subrack=ES-3,Fan=1FAN 1 BKV301487/1 R3A X76CE58174 Subrack=ES-4,Fan=1FAN 1 BKV301487/1 R3A X76CE50191 Subrack=ES-5,Fan=1FAN 1 BKV301487/1 R3A X76CE70276 Subrack=MS,Fan=1


--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

==================================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE transmissionType maxPwr fanConfiguration==================================================================================================================================Subrack=MS 0 Subrack ROJ605107/3 R1A ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=ES-1 1 Subrack ROJ605107/3 R1A ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=ES-2 2 Subrack ROJ605107/3 R1A ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=ES-5 9 Subrack ROJ605107/3 R1A ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=ES-3 11 Subrack ROJ605107/3 R1A ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=ES-4 12 Subrack ROJ605107/3 R1A ATM_TRANSMISSION 1000W BFD7422019_ONE ----------------------------------------------------------------------------------------------------------------------------------

==================================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE activeSwitchPlane switchState==================================================================================================================================Subrack=MS 0 Backplane ROJ 605 107/3 R1A X910136368 05W14 SWITCH_PLANE_A 111Subrack=ES-1 1 Backplane ROJ 605 107/3 R1A T821238808 03W45 SWITCH_PLANE_B 111Subrack=ES-2 2 Backplane ROJ 605 107/3 R1A T821238807 03W45 SWITCH_PLANE_B 111Subrack=ES-5 9 Backplane ROJ 605 107/3 R1A X910089549 04W32 SWITCH_PLANE_A 111Subrack=ES-3 11 Backplane ROJ 605 107/3 R1A X910084296 04W30 SWITCH_PLANE_B 111Subrack=ES-4 12 Backplane ROJ 605 107/3 R1A X910089486 04W32 SWITCH_PLANE_A 111----------------------------------------------------------------------------------------------------------------------------------

===============================================================================================================ExtSr SMN ISLGroup/Link ST Slot/Port(MS) Slot/Port(ES) PortState=============================================================================================================== ES-1 01 ES-1,.*=ISL-1-A 11 01/0 C3 01/0 C3 PASSIVE ES-1 01 ES-1,.*=ISL-1-B 11 28/0 C3 28/0 C3 ACTIVE--------------------------------------------------------------------------------------------------------------- ES-2 02 ES-2,.*=ISL-2-A 11 01/1 C3 01/0 C3 ACTIVE ES-2 02 ES-2,.*=ISL-2-B 11 28/1 C3 28/0 C3 PASSIVE--------------------------------------------------------------------------------------------------------------- ES-3 11 ES-3,.*=ISL-3-A 11 02/2 X3 01/0 C3 ACTIVE ES-3 11 ES-3,.*=ISL-3-B 11 03/2 X3 28/0 C3 PASSIVE--------------------------------------------------------------------------------------------------------------- ES-4 12 ES-4,.*=ISL-4-A 11 02/3 X3 01/0 C3 PASSIVE


ES-4 12 ES-4,.*=ISL-4-B 11 03/3 X3 28/0 C3 ACTIVE--------------------------------------------------------------------------------------------------------------- ES-5 09 ES-5,.*=ISL-5-A 11 02/0 X3 01/0 C3 ACTIVE ES-5 09 ES-5,.*=ISL-5-B 11 03/0 X3 28/0 C3 PASSIVE---------------------------------------------------------------------------------------------------------------

7.3.2 Example: RNC3820 (High Performance Subrack)

Node: RNC3820 CXP9014711/3_P3BC03 W11A (EP32-CPP_8.0.0.3)

=====================================================================================================================================SMN APN MOD BOARD SWALLOCATION S GE OPER MAINT FAULT c/p d CPU PRODUCTNUMBER REV SERIAL MO===================================================================================================================================== 0 1 SCB-DF SCB 1 -- ON OFF OFF 1% ROJ1192334/1 R1B/A A400767605 MS,Slot=1 0 2 TUB2 TUB 1 -- ON OFF OFF 0% ROJ1192104/4 R3C TU8G578122 MS,Slot=2 0 3 CMXB CMXB 1 - - ? ? ? 0% ROJ208504/1 R1C A063759119 MS,Slot=3 0 4 ET- IPG ETIPG 1 11 ON OFF OFF 1% ROJ1192345/1 R1A A400757400 MS,Slot=4 0 5 GPB75 GPB_C1 1 -- ON OFF OFF 51% 35% 1% ROJ1192106/75 R1B A401032612 MS,Slot=5 0 6 1061 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032650 MS,Slot=6 0 7 GPB75 GPB_C2 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032680 MS,Slot=7 0 8 1081 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032597 MS,Slot=8 0 9 SPB3 SPB_TYPE_A 1 -- ON 16HZ OFF 0% ROJ1192103/5 R1B A400783658 MS,Slot=9 0 10 SPB3 SPB_TYPE_B 1 00 ON 16HZ OFF 0% ROJ1192103/5 R1C TU8GC80660 MS,Slot=10 0 12 1121 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032633 MS,Slot=12 0 14 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1B A400788577 MS,Slot=14 0 15 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1B A400724210 MS,Slot=15 0 16 1161 GPB75 GPB_Module 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401215160 MS,Slot=16 0 17 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1B A400776748 MS,Slot=17 0 18 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1B A400776743 MS,Slot=18 0 19 1191 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401215209 MS,Slot=19 0 20 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1C TU8GD49157 MS,Slot=20 0 21 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1C TU8GD00268 MS,Slot=21 0 22 GPB75 GPB_C2 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032618 MS,Slot=22 0 23 SPB3 SPB_TYPE_A 1 00 ON 16HZ OFF 0% ROJ1192103/5 R1B A400777012 MS,Slot=23 0 24 GPB75 GPB_C1 1 -- ON OFF OFF 51% 35% 0% ROJ1192106/75 R1B A401032703 MS,Slot=24 0 25 ET-IPG ETIPG 1 11 ON OFF OFF 1% ROJ1192345/1 R1A A400757373 MS,Slot=25 0 26 CMXB CMXB 1 - - ? ? ? 0% ROJ208504/1 R1C A063955437 MS,Slot=26 0 27 TUB2 TUB 1 - - ON OFF OFF 0% ROJ1192104/4 R3C TU8G578032 MS,Slot=27 0 0 SCB-DF SCB 1 -- ON OFF OFF 1% ROJ1192334/1 R1B/A A400767693 MS,Slot=28------------------------------------------------------------------------------------------------------------------------------------- 1 1 SCB-DF SCB 1 -- ON OFF OFF 0% ROJ1192334/1 R1B/A A400767668 ES-1,Slot=1 1 2 2021 GPB75 GPB_Module 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032635 ES-1,Slot=2 1 3 CMXB CMXB 1 - - ? ? ? 0% ROJ208504/1 R1C A063742927 ES- 1,Slot=3 1 4 ET- IPG ETIPG 1 11 ON OFF OFF 1% ROJ1192345/1 R1A A400757345 ES- 1,Slot=4 1 5 SPB3 SPB_TYPE_A 1 -- ON 16HZ OFF 0% ROJ1192103/5 R1B A400776407 ES-1,Slot=5


1 6 SPB3 SPB_TYPE_B 1 00 ON 16HZ OFF 0% ROJ1192103/5 R1B A400776408 ES-1,Slot=6 1 8 2081 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032701 ES-1,Slot=8 1 10 SPB3 SPB_TYPE_B 1 00 ON 16HZ OFF 0% ROJ1192103/5 R1B A400776138 ES-1,Slot=10 1 11 SPB3 SPB_TYPE_B 1 -- ON 16HZ OFF 0% ROJ1192103/5 R1B A400783815 ES-1,Slot=11 1 12 2121 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032689 ES-1,Slot=12 1 13 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1B A400776414 ES-1,Slot=13 1 14 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1B A400783659 ES-1,Slot=14 1 15 2151 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401205262 ES-1,Slot=15 1 16 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1B A400793829 ES-1,Slot=16 1 17 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1C TU8GH73476 ES-1,Slot=17 1 18 2181 GPB75 GPB_Module 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401205219 ES-1,Slot=18 1 19 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1C TU8GH73525 ES-1,Slot=19 1 20 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1C TU8GH73524 ES-1,Slot=20 1 21 2211 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032634 ES-1,Slot=21 1 22 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1B A400775215 ES-1,Slot=22 1 23 2231 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401215207 ES-1,Slot=23 1 24 2241 GPB75 GPB_Module 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401215234 ES-1,Slot=24 1 25 ET-IPG ETIPG 1 11 ON OFF OFF 1% ROJ1192345/1 R1A A400757353 ES-1,Slot=25 1 26 CMXB CMXB 1 - - ? ? ? 0% ROJ208504/1 R1C A063718510 ES- 1,Slot=26 1 27 SPB3 SPB_TYPE_A 1 - - ON 16HZ OFF 0% ROJ1192103/5 R1B A400793772 ES- 1,Slot=27 1 0 SCB-DF SCB 1 -- ON OFF OFF 1% ROJ1192334/1 R1B/A A400767667 ES-1,Slot=28------------------------------------------------------------------------------------------------------------------------------------- 3 1 SCB-DF SCB 1 -- ON OFF OFF 0% ROJ1192334/1 R1B/A A400767585 ES-2,Slot=1 3 2 3021 GPB75 GPB_Module 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401133042 ES-2,Slot=2 3 3 CMXB CMXB 1 - - ? ? ? 0% ROJ208504/1 R1C A063759129 ES- 2,Slot=3 3 4 ET- IPG ETIPG 1 11 ON OFF OFF 1% ROJ1192345/1 R1A A400757351 ES- 2,Slot=4 3 5 SPB3 SPB_TYPE_A 1 -- ON 16HZ OFF 0% ROJ1192103/5 R1B A400785361 ES-2,Slot=5 3 6 SPB3 SPB_TYPE_B 1 00 ON 16HZ OFF 0% ROJ1192103/5 R1B A400776137 ES-2,Slot=6 3 8 3081 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401088691 ES-2,Slot=8 3 10 SPB3 SPB_TYPE_B 1 00 ON 16HZ OFF 0% ROJ1192103/5 R1B A400788603 ES-2,Slot=10 3 11 SPB3 SPB_TYPE_B 1 -- ON 16HZ OFF 0% ROJ1192103/5 R1B A400777010 ES-2,Slot=11 3 12 3121 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032621 ES-2,Slot=12 3 13 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1B A400776416 ES-2,Slot=13 3 14 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1B A400783684 ES-2,Slot=14 3 15 3151 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401205181 ES-2,Slot=15 3 16 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1B A400776120 ES-2,Slot=16 3 17 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1B A400776405 ES-2,Slot=17 3 18 3181 GPB75 GPB_Module 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401205172 ES-2,Slot=18 3 19 SPB3 SPB_TYPE_D 1 00 ON OFF OFF 0% ROJ1192103/5 R1C TU8GH73567 ES-2,Slot=19 3 20 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1C TU8GH73491 ES-2,Slot=20 3 21 3211 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401032657 ES-2,Slot=21 3 22 SPB3 SPB_TYPE_D 1 -- ON OFF OFF 0% ROJ1192103/5 R1C TU8GH73529 ES-2,Slot=22 3 23 3231 GPB75 GPB_Module 1 00 ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401215248 ES-2,Slot=23 3 24 3241 GPB75 GPB_Module 1 -- ON OFF OFF 0% 31% 0% ROJ1192106/75 R1B A401205169 ES-2,Slot=24 3 25 ET-IPG ETIPG 1 11 ON OFF OFF 1% ROJ1192345/1 R1A A400757333 ES-2,Slot=25 3 26 CMXB CMXB 1 - - ? ? ? 0% ROJ208504/1 R1C A063759121 ES- 2,Slot=26 3 27 SPB3 SPB_TYPE_A 1 - - ON 16HZ OFF 0% ROJ1192103/5 R1B A400776406 ES- 2,Slot=27 3 0 SCB-DF SCB 1 -- ON OFF OFF 1% ROJ1192334/1 R1B/A A400767662 ES-2,Slot=28-------------------------------------------------------------------------------------------------------------------------------------


=====================================================================================================================================XPBOARD ST PRODUCTNUMBER REV SERIAL/NAME MO=====================================================================================================================================FAN 1 BFB14012/1 R1B SBN73580506 Subrack=ES-1,Fan=1FAN 0 BFB14012/1 R1A 20081119SBN73 Subrack=ES-1,Fan=2FAN 1 BFB14012/1 R1B SBN73580507 Subrack=ES-2,Fan=1FAN 0 BFB14012/1 R1A 20081119SBN73 Subrack=ES-2,Fan=2FAN 0 BFB14012/1 * Subrack=MS,Fan=1FAN 1 BFB14012/1 R1A 20081119SBN73 Subrack=MS,Fan=2-------------------------------------------------------------------------------------------------------------------------------------

=====================================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE transmissionType maxPwr fanConfiguration position=====================================================================================================================================Subrack=MS 0 Subrack ROJ605117/1 R2A/1 ETHERNET10G 1600W BFD528_TWO 1BSubrack=ES-1 1 Subrack ROJ605117/1 R2A/1 ETHERNET10G 1600W BFD528_TWO 1CSubrack=ES-2 3 Subrack ROJ605117/1 R2A/1 ETHERNET10G 1600W BFD528_TWO 1D-------------------------------------------------------------------------------------------------------------------------------------

=====================================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE activeSwitchPlane switchState=====================================================================================================================================Subrack=MS 0 Backplane ROJ 605 117/1 R2A/1 X911640706 20080714 SWITCH_PLANE_A 111Subrack=ES-1 1 Backplane ROJ 605 117/1 R2A/1 X911640688 20080714 SWITCH_PLANE_A 111Subrack=ES-2 3 Backplane ROJ 605 117/1 R2A/1 X911640676 20080714 SWITCH_PLANE_A 111-------------------------------------------------------------------------------------------------------------------------------------

===============================================================================================================ExtSr SMN ISLGroup/Link ST Slot/Port(MS) Slot/Port(ES) PortState=============================================================================================================== ES-1 01 ES-1,.*=ISL-1-A 11 01/0 C-DF 01/0 C-DF ACTIVE ES-1 01 ES-1,.*=ISL-1-B 11 28/0 C-DF 28/0 C-DF PASSIVE--------------------------------------------------------------------------------------------------------------- ES-2 03 ES-2,.*=ISL-2-A 11 01/2 C-DF 01/0 C-DF ACTIVE ES-2 03 ES-2,.*=ISL-2-B 11 28/2 C-DF 28/0 C-DF PASSIVE---------------------------------------------------------------------------------------------------------------


7.3.3 Example: MGW GMPv3 (standard subrack)

MGW6> inv

===============================================================================================================================SMN APN BOARD SWALLOCATION S OPER MAINT FAULT c/p d CPU PRODUCTNUMBER REV SERIAL MO=============================================================================================================================== 0 1 SCB3 MGW_SCB 1 ON OFF OFF 2% ROJ1192108/4 R2C TU89242231 1,Slot=1 0 2 GPB53 MGW_MS_GPB_02 1 ON OFF OFF 40% 33% 10% ROJ1192106/53 R4C TU89286176 1,Slot=2 0 3 GPB53 MGW_MS_GPB_03 1 ON OFF OFF 40% 33% 30% ROJ1192106/53 R4C TU89286278 1,Slot=3 0 4 TUB2 MGW_TUB 1 ON OFF OFF 0% ROJ1192104/4 R3C TU89331643 1,Slot=4 0 5 TUB2 MGW_TUB 1 ON OFF OFF 0% ROJ1192104/4 R3C TU89331644 1,Slot=5 0 6 GPB53 MGW_MS_GPB_06 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89285976 1,Slot=6 0 7 GPB53 MGW_MS_GPB_07 1 ON OFF OFF 0% 29% 0% ROJ1192106/53 R4C TU89285661 1,Slot=7 0 8 GPB53 MGW_MS_GPB_08 1 ON OFF OFF 0% 29% 0% ROJ1192106/53 R4C TU89285795 1,Slot=8 0 9 GPB53 MGW_MS_GPB_09 1 ON OFF OFF 0% 29% 0% ROJ1192106/53 R4C TU89285629 1,Slot=9 0 10 GPB53 MGW_MS_GPB_10 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89285799 1,Slot=10 0 11 GPB53 MGW_MS_GPB_11 1 ON OFF OFF 0% 29% 0% ROJ1192106/53 R4C TU89285630 1,Slot=11 0 12 GPB53 MGW_MS_GPB_12 1 ON OFF OFF 0% 29% 1% ROJ1192106/53 R4C TU89285792 1,Slot=12 0 13 GPB53 MGW_MS_GPB_13 1 ON OFF OFF 0% 29% 1% ROJ1192106/53 R4C TU89285977 1,Slot=13 0 14 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89293001 1,Slot=14 0 15 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89292530 1,Slot=15 0 16 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89293199 1,Slot=16 0 17 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89292388 1,Slot=17 0 18 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89292525 1,Slot=18 0 19 SXB3 MGW_SXB_Main 1 ON OFF OFF 2% ROJ1192109/3 R1C TU8BK22049 1,Slot=19 0 20 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89292545 1,Slot=20 0 21 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89292549 1,Slot=21 0 22 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89292375 1,Slot=22 0 23 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89293263 1,Slot=23 0 24 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89293269 1,Slot=24 0 25 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89293245 1,Slot=25 0 26 SXB3 MGW_SXB_Main 1 ON OFF OFF 1% ROJ1192109/3 R1C TU89293243 1,Slot=26 0 27 ET-MC1 MGW_ET_MC1 1 ON OFF OFF 0% ROJ1192163/1 R5B TU89068040 1,Slot=27 0 0 SCB3 MGW_SCB 1 ON OFF OFF 2% ROJ1192108/4 R2C TU89241518 1,Slot=28------------------------------------------------------------------------------------------------------------------------------- 1 1 SCB3 MGW_SCB 1 ON OFF OFF 1% ROJ1192108/4 R2C TU89241698 2,Slot=1 1 2 GPB53 MGW_MOD_GPB_02 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89285793 2,Slot=2 1 3 GPB53 MGW_MOD_GPB_03 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89285797 2,Slot=3 1 4 MSB3 MGW_MSB3_Profile_16 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404101 2,Slot=4 1 5 MSB3 MGW_MSB3_Profile_16 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404062 2,Slot=5 1 6 MSB3 MGW_MSB3_Profile_8 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404130 2,Slot=6 1 7 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404115 2,Slot=7


1 8 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063402378 2,Slot=8 1 9 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404129 2,Slot=9 1 10 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404114 2,Slot=10 1 11 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063360078 2,Slot=11 1 12 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404113 2,Slot=12 1 13 MSB3 MGW_MSB3_Profile_15 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404128 2,Slot=13 1 14 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063360079 2,Slot=14 1 15 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404061 2,Slot=15 1 19 ET-MFG MGW_ET_MFG 1 ON OFF OFF 4% ROJ1192232/1 R2B T01D141621 2,Slot=19 1 20 ET-MFG MGW_ET_MFG 1 ON OFF OFF 4% ROJ1192232/1 R2B T01D141578 2,Slot=20 1 21 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170665 2,Slot=21 1 22 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170680 2,Slot=22 1 23 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170751 2,Slot=23 1 24 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D160351 2,Slot=24 1 25 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D160263 2,Slot=25 1 26 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D160380 2,Slot=26 1 27 SXB3 MGW_SXB_Device 1 ON OFF OFF 0% ROJ1192109/3 R1C TU89293241 2,Slot=27 1 0 SCB3 MGW_SCB 1 ON OFF OFF 2% ROJ1192108/4 R2C TU89213889 2,Slot=28------------------------------------------------------------------------------------------------------------------------------- 65 1 SCB3 MGW_SCB 1 ON OFF OFF 1% ROJ1192108/4 R2C TU89217981 3,Slot=1 65 2 GPB53 MGW_MOD_GPB_02 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89285905 3,Slot=2 65 3 GPB53 MGW_MOD_GPB_03 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89285938 3,Slot=3 65 4 MSB3 MGW_MSB3_Profile_16 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404121 3,Slot=4 65 5 MSB3 MGW_MSB3_Profile_16 1 ON OFF OFF 1% ROJ1192201/1 R7B A063360074 3,Slot=5 65 6 MSB3 MGW_MSB3_Profile_8 1 ON OFF OFF 1% ROJ1192201/1 R7B A063360073 3,Slot=6 65 7 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404124 3,Slot=7 65 8 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404126 3,Slot=8 65 9 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404125 3,Slot=9 65 10 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404123 3,Slot=10 65 11 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063360071 3,Slot=11 65 12 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063360072 3,Slot=12 65 13 MSB3 MGW_MSB3_Profile_15 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404122 3,Slot=13 65 14 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063402226 3,Slot=14 65 15 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403615 3,Slot=15 65 19 ET-MFG MGW_ET_MFG 1 ON OFF OFF 4% ROJ1192232/1 R2B T01D141634 3,Slot=19 65 20 ET-MFG MGW_ET_MFG 1 ON OFF OFF 4% ROJ1192232/1 R2B T01D141741 3,Slot=20 65 21 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170672 3,Slot=21 65 22 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170667 3,Slot=22 65 23 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170671 3,Slot=23 65 24 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D168001 3,Slot=24 65 25 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D167983 3,Slot=25 65 26 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D167989 3,Slot=26 65 27 SXB3 MGW_SXB_Device 1 ON OFF OFF 0% ROJ1192109/3 R1C TU89292689 3,Slot=27 65 0 SCB3 MGW_SCB 1 ON OFF OFF 2% ROJ1192108/4 R2C TU89242025 3,Slot=28-------------------------------------------------------------------------------------------------------------------------------


73 1 SCB3 MGW_SCB 1 ON OFF OFF 1% ROJ1192108/4 R2C TU89242621 4,Slot=1 73 2 GPB53 MGW_MOD_GPB_02 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89286135 4,Slot=2 73 3 GPB53 MGW_MOD_GPB_03 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89286276 4,Slot=3 73 4 MSB3 MGW_MSB3_Profile_16 1 ON OFF OFF 2% ROJ1192201/1 R7B A063403996 4,Slot=4 73 5 MSB3 MGW_MSB3_Profile_16 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403605 4,Slot=5 73 6 MSB3 MGW_MSB3_Profile_8 1 ON OFF OFF 2% ROJ1192201/1 R7B A063403606 4,Slot=6 73 7 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403611 4,Slot=7 73 8 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403612 4,Slot=8 73 9 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403607 4,Slot=9 73 10 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403569 4,Slot=10 73 11 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403614 4,Slot=11 73 12 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403570 4,Slot=12 73 13 MSB3 MGW_MSB3_Profile_15 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403571 4,Slot=13 73 14 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403617 4,Slot=14 73 15 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063403572 4,Slot=15 73 19 ET-MFG MGW_ET_MFG 1 ON OFF OFF 4% ROJ1192232/1 R2B T01D141601 4,Slot=19 73 20 ET-MFG MGW_ET_MFG 1 ON OFF OFF 4% ROJ1192232/1 R2B T01D141599 4,Slot=20 73 21 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170668 4,Slot=21 73 22 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170670 4,Slot=22 73 23 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170674 4,Slot=23 73 24 ET-C41 MGW_ET_C41 1 ON OFF OFF 9% ROJ1192257/1 R1A T01D160307 4,Slot=24 73 25 ET-C41 MGW_ET_C41 1 ON OFF OFF 9% ROJ1192257/1 R1A T01D156528 4,Slot=25 73 26 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D157930 4,Slot=26 73 27 SXB3 MGW_SXB_Device 1 ON OFF OFF 0% ROJ1192109/3 R1C TU89292393 4,Slot=27 73 0 SCB3 MGW_SCB 1 ON OFF OFF 2% ROJ1192108/4 R2C TU89242362 4,Slot=28------------------------------------------------------------------------------------------------------------------------------- 89 1 SCB3 MGW_SCB 1 ON OFF OFF 1% ROJ1192108/4 R2C TU89165983 5,Slot=1 89 2 GPB53 MGW_MOD_GPB_02 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89285907 5,Slot=2 89 3 GPB53 MGW_MOD_GPB_03 1 ON OFF OFF 0% 29% 2% ROJ1192106/53 R4C TU89285975 5,Slot=3 89 4 MSB3 MGW_MSB3_Profile_16 1 ON OFF OFF 2% ROJ1192201/1 R7B A063404005 5,Slot=4 89 5 MSB3 MGW_MSB3_Profile_16 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404117 5,Slot=5 89 6 MSB3 MGW_MSB3_Profile_8 1 ON OFF OFF 2% ROJ1192201/1 R7B A063404054 5,Slot=6 89 7 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404116 5,Slot=7 89 8 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404063 5,Slot=8 89 9 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404053 5,Slot=9 89 10 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404064 5,Slot=10 89 11 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404102 5,Slot=11 89 12 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404109 5,Slot=12 89 13 MSB3 MGW_MSB3_Profile_15 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404103 5,Slot=13 89 14 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404119 5,Slot=14 89 15 MSB3 MGW_MSB3_Profile_3 1 ON OFF OFF 1% ROJ1192201/1 R7B A063404050 5,Slot=15 89 19 ET-MFG MGW_ET_MFG 1 ON OFF OFF 4% ROJ1192232/1 R2B T01D141742 5,Slot=19 89 20 ET-MFG MGW_ET_MFG 1 ON OFF OFF 4% ROJ1192232/1 R2B T01D141593 5,Slot=20 89 21 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170677 5,Slot=21 89 22 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170678 5,Slot=22


89 23 ET-M4 MGW_ETM4_ETMF41 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170675 5,Slot=23 89 24 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D167986 5,Slot=24 89 25 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D168153 5,Slot=25 89 26 ET-C41 MGW_ET_C41 1 ON OFF OFF 10% ROJ1192257/1 R1A T01D168180 5,Slot=26 89 27 SXB3 MGW_SXB_Device 1 ON OFF OFF 0% ROJ1192109/3 R1C TU89293151 5,Slot=27 89 0 SCB3 MGW_SCB 1 ON OFF OFF 2% ROJ1192108/4 R2C TU89195807 5,Slot=28------------------------------------------------------------------------------------------------------------------------------- 97 1 SCB3 MGW_SCB 1 ON OFF OFF 0% ROJ1192108/4 R2C TU89242331 6,Slot=1 97 2 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170681 6,Slot=2 97 3 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170682 6,Slot=3 97 4 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170644 6,Slot=4 97 5 ET-M4 MGW_ET_M4 1 ON OFF OFF 1% ROJ1192102/22 R1B TU89170796 6,Slot=5 97 6 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170769 6,Slot=6 97 7 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170790 6,Slot=7 97 8 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170760 6,Slot=8 97 9 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170798 6,Slot=9 97 10 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89190402 6,Slot=10 97 11 ET-M4 MGW_ET_M4 1 ON OFF OFF 0% ROJ1192102/22 R1B TU89170615 6,Slot=11 97 17 ET-MC41 MGW_ET_MC41 1 ON OFF OFF 6% ROJ1192161/2 R1B TU89198496 6,Slot=17 97 19 ET-MC41 MGW_ET_MC41 1 ON OFF OFF 5% ROJ1192161/2 R1B TU89198777 6,Slot=19 97 21 ET-MC41 MGW_ET_MC41 1 ON OFF OFF 6% ROJ1192161/2 R1B TU89179976 6,Slot=21 97 23 ET-MC41 MGW_ET_MC41 1 ON OFF OFF 6% ROJ1192161/2 R1B TU89198771 6,Slot=23 97 25 ET-C41 MGW_ET_C41 1 ON OFF OFF 9% ROJ1192257/1 R1A T01D167987 6,Slot=25 97 26 ET-C41 MGW_ET_C41 1 ON OFF OFF 8% ROJ1192257/1 R1A T01D157986 6,Slot=26 97 27 SXB3 MGW_SXB_Device 1 ON OFF OFF 0% ROJ1192109/3 R1C TU89292605 6,Slot=27 97 0 SCB3 MGW_SCB 1 ON OFF OFF 2% ROJ1192108/4 R2C TU89242435 6,Slot=28-------------------------------------------------------------------------------------------------------------------------------

===============================================================================================================================XPBOARD ST PRODUCTNUMBER REV SERIAL/NAME MO===============================================================================================================================XALM 1 ZHA90134/1 R2C A442145219 Macu=1FAN 1 BFD50908 4 R1J S773487544 MgwFan=1AFAN 1 BFD50908 4 R1J S773487548 MgwFan=1BFAN 1 BFD50908 4 R1J S773487546 MgwFan=1CFAN 1 BFD50908 4 R1J S773487536 MgwFan=1DFAN 1 BFD50908 4 R1J S773488136 MgwFan=2CFAN 1 BFD50908 4 R1J S773487549 MgwFan=2D-------------------------------------------------------------------------------------------------------------------------------mgw_xalm - CXP9012696 R3A01 mgw_xalm Macu=1,XpProgram=CXP9012696R3A01-------------------------------------------------------------------------------------------------------------------------------


===============================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE transmissionType maxPwr fanConfiguration===============================================================================================================================Subrack=1 0 Subrack BFD 508 01/33 R1A MGW HW 01W05 ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=2 1 Subrack BFD 508 01/33 R1A MGW HW 01W05 ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=3 65 Subrack BFD 508 01/33 R1A MGW HW 01W05 ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=4 73 Subrack BFD 508 01/33 R1A MGW HW 01W05 ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=5 89 Subrack BFD 508 01/33 R1A MGW HW 01W05 ATM_TRANSMISSION 1000W BFD7422019_ONE Subrack=6 97 Subrack BFD 508 01/33 R1A MGW HW 01W05 ATM_TRANSMISSION 1000W BFD7422019_ONE -------------------------------------------------------------------------------------------------------------------------------

===============================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE activeSwitchPlane switchState===============================================================================================================================Subrack=1 0 Backplane ROJ 605 107/3 R1A X911090152 20060801 SWITCH_PLANE_B 111Subrack=2 1 Backplane ROJ 605 107/3 R1A X911090443 20060802 SWITCH_PLANE_A 111Subrack=3 65 Backplane ROJ 605 107/3 R1A X911090271 20060801 SWITCH_PLANE_B 111Subrack=4 73 Backplane ROJ 605 107/3 R1A X911090208 20060801 SWITCH_PLANE_B 111Subrack=5 89 Backplane ROJ 605 107/3 R1A X911090267 20060801 SWITCH_PLANE_B 111Subrack=6 97 Backplane ROJ 605 107/3 R1A X911090322 20060802 SWITCH_PLANE_B 111-------------------------------------------------------------------------------------------------------------------------------

=========================================================================================================ExtSr SMN ISLGroup/Link ST Slot/Port(MS) Slot/Port(ES) PortState========================================================================================================= 2 01 MAIN-MOD_1,.*=1 11 01/0 C3 01/0 C3 ACTIVE 2 01 MAIN-MOD_1,.*=2 11 01/1 C3 01/1 C3 ACTIVE 2 01 MAIN-MOD_1,.*=3 01 14/2 X3 27/2 X3 ACTIVE 2 01 MAIN-MOD_1,.*=4 01 14/3 X3 27/3 X3 ACTIVE 2 01 MAIN-MOD_1,.*=5 11 28/0 C3 28/0 C3 PASSIVE 2 01 MAIN-MOD_1,.*=6 11 28/1 C3 28/1 C3 PASSIVE 2 01 MAIN-MOD_1,.*=7 11 28/2 C3 28/2 C3 PASSIVE 2 01 MAIN-MOD_1,.*=8 11 28/3 C3 28/3 C3 PASSIVE--------------------------------------------------------------------------------------------------------- 3 65 MAIN-MOD_2,.*=1 11 16/0 X3 01/0 C3 ACTIVE 3 65 MAIN-MOD_2,.*=2 11 16/1 X3 01/1 C3 ACTIVE 3 65 MAIN-MOD_2,.*=3 01 15/2 X3 27/2 X3 ACTIVE 3 65 MAIN-MOD_2,.*=4 01 15/3 X3 27/3 X3 ACTIVE


3 65 MAIN-MOD_2,.*=5 11 17/0 X3 28/0 C3 PASSIVE 3 65 MAIN-MOD_2,.*=6 11 17/1 X3 28/1 C3 PASSIVE 3 65 MAIN-MOD_2,.*=7 11 17/2 X3 28/2 C3 PASSIVE 3 65 MAIN-MOD_2,.*=8 11 17/3 X3 28/3 C3 PASSIVE--------------------------------------------------------------------------------------------------------- 4 73 MAIN-MOD_3,.*=1 11 18/0 X3 01/0 C3 ACTIVE 4 73 MAIN-MOD_3,.*=2 11 18/1 X3 01/1 C3 ACTIVE 4 73 MAIN-MOD_3,.*=3 01 20/2 X3 27/2 X3 ACTIVE 4 73 MAIN-MOD_3,.*=4 01 20/3 X3 27/3 X3 ACTIVE 4 73 MAIN-MOD_3,.*=5 11 19/0 X3 28/0 C3 PASSIVE 4 73 MAIN-MOD_3,.*=6 11 19/1 X3 28/1 C3 PASSIVE 4 73 MAIN-MOD_3,.*=7 11 19/2 X3 28/2 C3 PASSIVE 4 73 MAIN-MOD_3,.*=8 11 19/3 X3 28/3 C3 PASSIVE--------------------------------------------------------------------------------------------------------- 5 89 MAIN-MOD_4,.*=1 11 22/0 X3 01/0 C3 ACTIVE 5 89 MAIN-MOD_4,.*=2 11 22/1 X3 01/1 C3 ACTIVE 5 89 MAIN-MOD_4,.*=3 01 21/2 X3 27/2 X3 ACTIVE 5 89 MAIN-MOD_4,.*=4 01 21/3 X3 27/3 X3 ACTIVE 5 89 MAIN-MOD_4,.*=5 11 23/0 X3 28/0 C3 PASSIVE 5 89 MAIN-MOD_4,.*=6 11 23/1 X3 28/1 C3 PASSIVE 5 89 MAIN-MOD_4,.*=7 11 23/2 X3 28/2 C3 PASSIVE 5 89 MAIN-MOD_4,.*=8 11 23/3 X3 28/3 C3 PASSIVE--------------------------------------------------------------------------------------------------------- 6 97 MAIN-ET_MOD,.*=1 11 24/0 X3 01/0 C3 ACTIVE 6 97 MAIN-ET_MOD,.*=2 11 24/1 X3 01/1 C3 ACTIVE 6 97 MAIN-ET_MOD,.*=3 01 26/2 X3 27/2 X3 ACTIVE 6 97 MAIN-ET_MOD,.*=4 01 26/3 X3 27/3 X3 ACTIVE 6 97 MAIN-ET_MOD,.*=5 11 25/0 X3 28/0 C3 PASSIVE 6 97 MAIN-ET_MOD,.*=6 11 25/1 X3 28/1 C3 PASSIVE 6 97 MAIN-ET_MOD,.*=7 11 25/2 X3 28/2 C3 PASSIVE 6 97 MAIN-ET_MOD,.*=8 11 25/3 X3 28/3 C3 PASSIVE---------------------------------------------------------------------------------------------------------

....<cut>..===============================================================================================================================SMN APN BOARDTYPE ST PRODUCTNUMBER_REV NAME MO=============================================================================================================================== 0 1 SCB3 1 CXC1321120_R61CN02 nssscb_bp 1,Slot=1,PlugInUnit=1,Program=CXC1321120_R61CN02 0 1 SCB3 1 CXC1321121_R61ES03 nsssyci_mpbp 1,Slot=1,PlugInUnit=1,Program=CXC1321121_R61ES03 0 1 SCB3 1 CXC1321407_R61HH04 spas_link 1,Slot=1,PlugInUnit=1,Program=CXC1321407_R61HH04 0 1 SCB3 1 CXC1321409_R61HH02 spas_sm 1,Slot=1,PlugInUnit=1,Program=CXC1321409_R61HH02 0 1 SCB3 1 CXC1322165/12_R61HH02 48Vpowersup 1,Slot=1,PlugInUnit=1,Program=CXC1322165/12_R61HH02


0 1 SCB3 1 CXC1322166/3_R61HH02 atf 1,Slot=1,PlugInUnit=1,Program=CXC1322166/3_R61HH02 0 1 SCB3 1 CXC1322250_R61HH10 dbm2_cs_basi 1,Slot=1,PlugInUnit=1,Program=CXC1322250_R61HH10 0 1 SCB3 1 CXC1721176_R61HH03 pm_agent 1,Slot=1,PlugInUnit=1,Program=CXC1721176_R61HH03------------------------------------------------------------------------------------------------------------------------------- 0 2 GPB53 1 CXC1320742_R61HH02 spas_connect 1,Slot=2,PlugInUnit=1,Program=CXC1320742_R61HH02 0 2 GPB53 1 CXC1320781_R61HH03 database 1,Slot=2,PlugInUnit=1,Program=CXC1320781_R61HH03 0 2 GPB53 1 CXC1320782_R61HH09 equipment_re 1,Slot=2,PlugInUnit=1,Program=CXC1320782_R61HH09 0 2 GPB53 1 CXC1320783_R61HH02 http_server 1,Slot=2,PlugInUnit=1,Program=CXC1320783_R61HH02 0 2 GPB53 1 CXC1320784_R61HH04 jvm 1,Slot=2,PlugInUnit=1,Program=CXC1320784_R61HH04 0 2 GPB53 1 CXC1320785_R61HH02 loaderserver 1,Slot=2,PlugInUnit=1,Program=CXC1320785_R61HH02 0 2 GPB53 1 CXC1320787_R61HH03 SystemManage 1,Slot=2,PlugInUnit=1,Program=CXC1320787_R61HH03 0 2 GPB53 1 CXC1320836_R61HL04 aal2mp 1,Slot=2,PlugInUnit=1,Program=CXC1320836_R61HL04 0 2 GPB53 1 CXC1320839_R61HL07 atmmp 1,Slot=2,PlugInUnit=1,Program=CXC1320839_R61HL07 0 2 GPB53 1 CXC1320978_R61DX01 aal05ncc 1,Slot=2,PlugInUnit=1,Program=CXC1320978_R61DX01 0 2 GPB53 1 CXC1320980_R61HL01 aalcrossconn 1,Slot=2,PlugInUnit=1,Program=CXC1320980_R61HL01 0 2 GPB53 1 CXC1320995/31_R61AZ01 aal5_term_mp 1,Slot=2,PlugInUnit=1,Program=CXC1320995/31_R61AZ01 0 2 GPB53 1 CXC1321118/1_R61HH02 nssmp 1,Slot=2,PlugInUnit=1,Program=CXC1321118/1_R61HH02 0 2 GPB53 1 CXC1321121_R61ES03 nsssyci_mpbp 1,Slot=2,PlugInUnit=1,Program=CXC1321121_R61ES03 0 2 GPB53 1 CXC1321171_R61CG02 nsaal_adm 1,Slot=2,PlugInUnit=1,Program=CXC1321171_R61CG02 0 2 GPB53 1 CXC1321314_R61HH03 sock 1,Slot=2,PlugInUnit=1,Program=CXC1321314_R61HH03 0 2 GPB53 1 CXC1321315_R61HH03 inet 1,Slot=2,PlugInUnit=1,Program=CXC1321315_R61HH03 0 2 GPB53 1 CXC1321316_R61HH05 ethernet 1,Slot=2,PlugInUnit=1,Program=CXC1321316_R61HH05 0 2 GPB53 1 CXC1321317_R61HH04 ospf 1,Slot=2,PlugInUnit=1,Program=CXC1321317_R61HH04 0 2 GPB53 1 CXC1321341_R61HH04 sw_installat 1,Slot=2,PlugInUnit=1,Program=CXC1321341_R61HH04 0 2 GPB53 1 CXC1321344_R61HH02 pms 1,Slot=2,PlugInUnit=1,Program=CXC1321344_R61HH02 0 2 GPB53 1 CXC1321408_R61HH03 spas_resourc 1,Slot=2,PlugInUnit=1,Program=CXC1321408_R61HH03 0 2 GPB53 1 CXC1321447_R61HH17 gpb_cs_basic 1,Slot=2,PlugInUnit=1,Program=CXC1321447_R61HH17 0 2 GPB53 1 CXC1321520_R61FN05 equipmp 1,Slot=2,PlugInUnit=1,Program=CXC1321520_R61FN05 0 2 GPB53 1 CXC1322208_R61FN02 aal5_static_ 1,Slot=2,PlugInUnit=1,Program=CXC1322208_R61FN02 0 2 GPB53 1 CXC1322209_R61HL01 aal5_dynamic 1,Slot=2,PlugInUnit=1,Program=CXC1322209_R61HL01 0 2 GPB53 1 CXC1322210_R61FN02 aal0_static_ 1,Slot=2,PlugInUnit=1,Program=CXC1322210_R61FN02 0 2 GPB53 1 CXC1322211_R61CJ01 aal0_dynamic 1,Slot=2,PlugInUnit=1,Program=CXC1322211_R61CJ01 0 2 GPB53 1 CXC1322418/12_R61HL01 aal2cpsrc_12 1,Slot=2,PlugInUnit=1,Program=CXC1322418/12_R61HL01 0 2 GPB53 1 CXC1322419/12_R61HL01 aal2distncc_ 1,Slot=2,PlugInUnit=1,Program=CXC1322419/12_R61HL01 0 2 GPB53 1 CXC1322420/12_R61HL02 aal2nccadm_1 1,Slot=2,PlugInUnit=1,Program=CXC1322420/12_R61HL02 0 2 GPB53 1 CXC1322506_R61HH03 iputil 1,Slot=2,PlugInUnit=1,Program=CXC1322506_R61HH03 0 2 GPB53 1 CXC1322812_R61HH01 gpb_pqiipatc 1,Slot=2,PlugInUnit=1,Program=CXC1322812_R61HH01 0 2 GPB53 1 CXC1323464_R61HH09 objectsuppor 1,Slot=2,PlugInUnit=1,Program=CXC1323464_R61HH09 0 2 GPB53 1 CXC1323491_R61CA01 aal1_static_ 1,Slot=2,PlugInUnit=1,Program=CXC1323491_R61CA01 0 2 GPB53 1 CXC1323506_R61CA01 aal1crosscon 1,Slot=2,PlugInUnit=1,Program=CXC1323506_R61CA01 0 2 GPB53 1 CXC1323507_R61DX02 aal1ncc 1,Slot=2,PlugInUnit=1,Program=CXC1323507_R61DX02 0 2 GPB53 1 CXC1323636_R61HL03 ds0mp 1,Slot=2,PlugInUnit=1,Program=CXC1323636_R61HL03 0 2 GPB53 1 CXC1323657_R61BE02 scc_mtp2adm 1,Slot=2,PlugInUnit=1,Program=CXC1323657_R61BE02 0 2 GPB53 1 CXC1323911_R61HH06 ssh 1,Slot=2,PlugInUnit=1,Program=CXC1323911_R61HH06 0 2 GPB53 1 CXC1324169_R61HL01 phymp 1,Slot=2,PlugInUnit=1,Program=CXC1324169_R61HL01


0 2 GPB53 1 CXC1324928/8_R30F02 upcfoam 1,Slot=2,PlugInUnit=1,Program=CXC1324928/8_R30F02...<cut>...------------------------------------------------------------------------------------------------------------------------------ 65 5 MSB3 1 CXC1321121_R61ES03 nsssyci_mpbp 3,Slot=5,PlugInUnit=1,Program=CXC1321121_R61ES03 65 5 MSB3 1 CXC1322250_R61HH05 dbm2_cs_basi 3,Slot=5,PlugInUnit=1,Program=CXC1322250_R61HH05 65 5 MSB3 1 CXC1327908/8_R3M02 bpbas3 3,Slot=5,PlugInUnit=1,Program=CXC1327908/8_R3M02 65 5 MSB3 1 CXC1327915/8_R3T02 bpmpp3b 3,Slot=5,PlugInUnit=1,Program=CXC1327915/8_R3T02 65 5 MSB3 1 CXC1721176_R61HH03 pm_agent 3,Slot=5,PlugInUnit=1,Program=CXC1721176_R61HH03 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03-2 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03-3 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03-4 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03-5 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03-6 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03-7 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03-8 65 5 MsDev=1 - CXC1327790/8_R4N03 umtsmfd 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327790/8_R4N03-9 65 5 MsDev=1 - CXC1327791/8_R4L02 csd_digital 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327791/8_R4L02 65 5 MsDev=1 - CXC1327791/8_R4L02 csd_digital 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327791/8_R4L02-2 65 5 MsDev=1 - CXC1327792/8_R4K02 csd_modem 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327792/8_R4K02 65 5 MsDev=1 - CXC1327794/8_R4K02 mfh_gsm 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327794/8_R4K02 65 5 MsDev=1 - CXC1327799/8_R4J02 implayer 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327799/8_R4J02 65 5 MsDev=1 - CXC1327801/8_R4J02 mpc 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1327801/8_R4J02 65 5 MsDev=1 - CXC1720519/8_R4K02 fax 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1720519/8_R4K02 65 5 MsDev=1 - CXC1720751/8_R3J02 albin 3,Slot=5,PlugInUnit=1,MsDe.*=1,MsProgram=CXC1720751/8_R3J02------------------------------------------------------------------------------------------------------------------------------....<cut>.... 97 0 SCB3 1 CXC1321120_R61CN02 nssscb_bp 6,Slot=28,PlugInUnit=1,Program=CXC1321120_R61CN02 97 0 SCB3 1 CXC1321121_R61ES03 nsssyci_mpbp 6,Slot=28,PlugInUnit=1,Program=CXC1321121_R61ES03 97 0 SCB3 1 CXC1321407_R61HH04 spas_link 6,Slot=28,PlugInUnit=1,Program=CXC1321407_R61HH04 97 0 SCB3 1 CXC1321409_R61HH02 spas_sm 6,Slot=28,PlugInUnit=1,Program=CXC1321409_R61HH02 97 0 SCB3 1 CXC1322165/12_R61HH02 48Vpowersup 6,Slot=28,PlugInUnit=1,Program=CXC1322165/12_R61HH02 97 0 SCB3 1 CXC1322166/3_R61HH02 atf 6,Slot=28,PlugInUnit=1,Program=CXC1322166/3_R61HH02 97 0 SCB3 1 CXC1322250_R61HH10 dbm2_cs_basi 6,Slot=28,PlugInUnit=1,Program=CXC1322250_R61HH10 97 0 SCB3 1 CXC1721176_R61HH03 pm_agent 6,Slot=28,PlugInUnit=1,Program=CXC1721176_R61HH03--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

7.3.4 Example: RBS3206

RBS32> inv

Node: RBS3206 11/COH1092069 CXP9014346/1_R2AA/3 P7.1/W10 (EP2-CPP_7.0.3.7)


=====================================================================================================================================SMN APN BOARD SWALLOCATION S OPER MAINT FAULT c/p d CPU PRODUCTNUMBER REV SERIAL MO===================================================================================================================================== 0 1 CBU1 Main_CBU 1 ON 16HZ OFF 71% 44% 2% ROJ1192209/1 R5E TU8BM71045 1,Slot=1 0 2 ET-MFX11 RBS_ETMFX 1 ON OFF OFF 0% ROJ1192315/1 R5A A400605107 1,Slot=2 0 5 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA76900 1,Slot=5 (RaxR2e 128CE) 0 6 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA76902 1,Slot=6 (RaxR2e 128CE) 0 7 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA76943 1,Slot=7 (RaxR2e 128CE) 0 8 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA77146 1,Slot=8 (RaxR2e 128CE) 0 9 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA77164 1,Slot=9 (RaxR2e 128CE) 0 10 TX6HS-06 RBS_TXB 1 ON OFF OFF 1% ROJ1192254/6 R1E TU8GA83432 1,Slot=10 (HsTx60 384CE) 0 11 TX6HS-06 RBS_TXB 1 ON OFF OFF 1% ROJ1192254/6 R1E TU8GA83435 1,Slot=11 (HsTx60 384CE) 0 12 RUIF RBS_RUIFB 1 ON 16HZ OFF 17% ROJ1192245/2 R2A AE53798319 1,Slot=12 0 13 RUIF RBS_RUIFB 1 ON 16HZ OFF 17% ROJ1192245/2 R2A AE53798273 1,Slot=13 0 14 TX6HS-06 RBS_TXB 1 ON OFF OFF 1% ROJ1192254/6 R1D AE54400775 1,Slot=14 (HsTx60 384CE) 0 15 TX6HS-06 RBS_TXB 1 ON OFF OFF 1% ROJ1192254/6 R1B AE53781679 1,Slot=15 (HsTx60 384CE) 0 18 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA76903 1,Slot=18 (RaxR2e 128CE) 0 19 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA76885 1,Slot=19 (RaxR2e 128CE) 0 20 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA76946 1,Slot=20 (RaxR2e 128CE) 0 21 RAX RBS_RAXB 1 ON OFF OFF 0% ROJ1192187/14 R1D TU8GA76952 1,Slot=21 (RaxR2e 128CE) 0 24 CBU Main_CBU 0 ? ? ? 71% ? 0% ROJ1192209/1 * 1,Slot=24-------------------------------------------------------------------------------------------------------------------------------------

=====================================================================================================================================XPBOARD ST OPER MAINT FAULT PRODUCTNUMBER REV SERIAL/NAME MO=====================================================================================================================================FCU 1 ON 16HZ OFF BGM1361002/1 R1D BJ31104325 AuxPlugInUnit=2FU12 1 ON 16HZ OFF KRC11821/1 R1E TU8F135813 RbsSubrack=FU1,RbsSlot=2,AuxPlugInUnit=1 (850MHz)FU12 1 ON 16HZ OFF KRC11821/1 R1E TU8F135820 RbsSubrack=FU1,RbsSlot=3,AuxPlugInUnit=1 (850MHz)FU12 1 ON 16HZ OFF KRC11821/1 R1E TU8F134939 RbsSubrack=FU1,RbsSlot=4,AuxPlugInUnit=1 (850MHz)FU12 1 ON 16HZ OFF KRC11821/1 R1E TU8F135216 RbsSubrack=FU1,RbsSlot=5,AuxPlugInUnit=1 (850MHz)FU12 1 ON 16HZ OFF KRC11821/1 R1E TU8F132259 RbsSubrack=FU1,RbsSlot=6,AuxPlugInUnit=1 (850MHz)FU12 1 ON 16HZ OFF KRC11821/1 R1E TU8F132258 RbsSubrack=FU1,RbsSlot=7,AuxPlugInUnit=1 (850MHz)RU22 1 ON OFF OFF KRC11822/4 R1A AE55489827 RbsSubrack=RU1,RbsSlot=2,AuxPlugInUnit=1 (850MHz 40W 15MHz)RU22 1 ON OFF OFF KRC11822/4 R1B AE55603789 RbsSubrack=RU1,RbsSlot=3,AuxPlugInUnit=1 (850MHz 40W 15MHz)RU22 1 ON OFF OFF KRC11822/4 R1B AE55603786 RbsSubrack=RU1,RbsSlot=4,AuxPlugInUnit=1 (850MHz 40W 15MHz)RU22 1 ON OFF OFF KRC11822/4 R1B AE55603787 RbsSubrack=RU1,RbsSlot=5,AuxPlugInUnit=1 (850MHz 40W 15MHz)RU22 1 ON OFF OFF KRC11822/4 R1B AE55512427 RbsSubrack=RU1,RbsSlot=6,AuxPlugInUnit=1 (850MHz 40W 15MHz)RU22 1 ON OFF OFF KRC11822/4 R1B AE55603791 RbsSubrack=RU1,RbsSlot=7,AuxPlugInUnit=1 (850MHz 40W 15MHz)-------------------------------------------------------------------------------------------------------------------------------------ruwa - CXP9012183/7 R9YL ruwa RbsSubrack=RU1,RbsSlot=2,AuxPlugInUnit=1,RuDeviceGroup=1,XpProgram=12708101722774ruwa - CXP9012183/7 R9YL ruwa RbsSubrack=RU1,RbsSlot=3,AuxPlugInUnit=1,RuDeviceGroup=1,XpProgram=12708101723625ruwa - CXP9012183/7 R9YL ruwa RbsSubrack=RU1,RbsSlot=4,AuxPlugInUnit=1,RuDeviceGroup=1,XpProgram=12708101724336ruwa - CXP9012183/7 R9YL ruwa RbsSubrack=RU1,RbsSlot=5,AuxPlugInUnit=1,RuDeviceGroup=1,XpProgram=12708101725067ruwa - CXP9012183/7 R9YL ruwa RbsSubrack=RU1,RbsSlot=6,AuxPlugInUnit=1,RuDeviceGroup=1,XpProgram=12708101725798


ruwa - CXP9012183/7 R9YL ruwa RbsSubrack=RU1,RbsSlot=7,AuxPlugInUnit=1,RuDeviceGroup=1,XpProgram=12708101726639-------------------------------------------------------------------------------------------------------------------------------------

=====================================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE transmissionType maxPwr fanConfiguration position=====================================================================================================================================Subrack=1 0 Subrack ROJ605116/1 * DigSubrack ATM_TRANSMISSION 1000W NO_CPP_FAN 1B1-------------------------------------------------------------------------------------------------------------------------------------

=====================================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE activeSwitchPlane switchState=====================================================================================================================================Subrack=1 0 Backplane ROJ 605 116/1 R1B X911437632 20070322 SWITCH_PLANE_A 111-------------------------------------------------------------------------------------------------------------------------------------

...<cut>....

=====================================================================================================================================SMN APN BOARDTYPE ST PRODUCTNUMBER_REV NAME MO===================================================================================================================================== 0 1 CBU1 1 CXC1725156_R71AV02 ebos 1,Slot=1,PlugInUnit=1,Program=CXC1725156_R71AV02 0 1 CBU1 1 CXC1322812_R71AU01 gpb_pqi ipatc 1,Slot=1,PlugInUni t=1,Program=CXC1322812_R71AU01 0 1 CBU1 1 CXC1725465_R71AV02 i2cpqi i 1,Slot=1,PlugInUni t=1,Program=CXC1725465_R71AV02 0 1 CBU1 1 CXC1725558_R71AV04 ethfcc 1,Slot=1,PlugInUnit=1,Program=CXC1725558_R71AV04... 0 1 CBU1 1 CXC1329000/1_R48A01 MP_atf 1,Slot=1,PlugInUnit=1,Program=CXC1329000/1_R48A01 0 1 CBU1 1 CXC1720483_R71AV01 ncl i 1,Slot=1,PlugInUni t=1,Program=CXC1720483_R71AV01 0 1 CBU1 1 CXC1720957/1_R50J01 TuRnrbs 1,Slot=1,PlugInUnit=1,Program=CXC1720957/1_R50J01 0 1 CBU1 1 CXC1725446/1_R56K01 MPScc 1,Slot=1,PlugInUnit=1,Program=CXC1725446/1_R56K01 0 1 CBU1 1 CXC1725447/1_R56S01 MPEc_CBU 1,Slot=1,PlugInUnit=1,Program=CXC1725447/1_R56S01 0 1 CBU1 1 CXC1725448/1_R56Z01 MPNcc 1,Slot=1,PlugInUni t=1,Program=CXC1725448/1_R56Z01 0 1 CBU1 1 CXC1727169/1_R56D01 PPAdapter 1,Slot=1,PlugInUnit=1,Program=CXC1727169/1_R56D01 0 1 Cbu=1 1 CXC1324236_R71AN06 iworx_fw 1,Slot=1,PlugInUnit=1,Cbu=1,ExchangeTerminal=1,Program=CXC1324236_R71AN06 0 1 Cbu=1 1 CXC1327682_R71AN06 iworx_sdfw 1,Slot=1,PlugInUnit=1,Cbu=1,ExchangeTerminal=1,Program=CXC1327682_R71AN06 0 1 Cbu=1 1 CXC1327683_R71AN04 tum_fpga_lm 1,Slot=1,PlugInUnit=1,Cbu=1,TimingUnit=1,Program=CXC1327683_R71AN04------------------------------------------------------------------------------------------------------------------------------------- 0 2 ET-MFX11 1 CXC1725156_R71AV02 ebos 1,Slot=2,PlugInUnit=1,Program=CXC1725156_R71AV02 0 2 ET-MFX11 1 CXC1725467_R71AV02 i2copb 1,Slot=2,PlugInUnit=1,Program=CXC1725467_R71AV02 0 2 ET-MFX11 1 CXC1725310_R71AV03 bc_mp_bp 1,Slot=2,PlugInUnit=1,Program=CXC1725310_R71AV03 0 2 ET-MFX11 1 CXC1725501_R71AV02 bc_dbm2 1,Slot=2,PlugInUnit=1,Program=CXC1725501_R71AV02 0 2 ET-MFX11 1 CXC1725385_R71AV01 ics 1,Slot=2,PlugInUnit=1,Program=CXC1725385_R71AV01 0 2 ET-MFX11 1 CXC1725509_R71AV01 spas_basic_s 1,Slot=2,PlugInUnit=1,Program=CXC1725509_R71AV01


0 2 ET-MFX11 1 CXC1328682_R71AU01 lms 1,Slot=2,PlugInUnit=1,Program=CXC1328682_R71AU01 0 2 ET-MFX11 1 CXC1721176_R71AU01 pm_agent 1,Slot=2,PlugInUnit=1,Program=CXC1721176_R71AU01 0 2 ET-MFX11 1 CXC1321121_R71AU01 nsssyci_mpbp 1,Slot=2,PlugInUnit=1,Program=CXC1321121_R71AU01 0 2 ET-MFX11 1 CXC1722889_R71AV02 Exs5398Bp_lm 1,Slot=2,PlugInUnit=1,Program=CXC1722889_R71AV02 0 2 ET-MFX11 1 CXC1722862_R71AV03 ipetmfx_lm 1,Slot=2,PlugInUnit=1,Program=CXC1722862_R71AV03 0 2 EtIp=1 1 CXC1722504_R71AT01 mama 1,Slot=2,PlugInUnit=1,ExchangeTerminalIp=1,Program=CXC1722504_R71AT01 0 2 EtIp=1 1 CXC1722863_R71AN05 etmfxnp32_lm 1,Slot=2,PlugInUnit=1,ExchangeTerminalIp=1,Program=CXC1722863_R71AN05 0 2 EtIp=1 1 CXC1723376_R71AN06 bi f 1,Slot=2,PlugInUni t=1,ExchangeTerminal Ip=1,Program=CXC1723376_R71AN06------------------------------------------------------------------------------------------------------------------------------------- 0 5 RAX 1 CXC1725156_R71AV02 ebos 1,Slot=5,PlugInUnit=1,Program=CXC1725156_R71AV02 0 5 RAX 1 CXC1323195_R71AU01 dbm_dispacet 1,Slot=5,PlugInUni t=1,Program=CXC1323195_R71AU01 0 5 RAX 1 CXC1725467_R71AV02 i2copb 1,Slot=5,PlugInUni t=1,Program=CXC1725467_R71AV02 0 5 RAX 1 CXC1725310_R71AV03 bc_mp_bp 1,Slot=5,PlugInUnit=1,Program=CXC1725310_R71AV03 0 5 RAX 1 CXC1725501_R71AV02 bc_dbm2 1,Slot=5,PlugInUnit=1,Program=CXC1725501_R71AV02 0 5 RAX 1 CXC1725385_R71AV01 ics 1,Slot=5,PlugInUnit=1,Program=CXC1725385_R71AV01 0 5 RAX 1 CXC1725509_R71AV01 spas_basic_s 1,Slot=5,PlugInUnit=1,Program=CXC1725509_R71AV01 0 5 RAX 1 CXC1721518_R71AV01 dcs 1,Slot=5,PlugInUnit=1,Program=CXC1721518_R71AV01 0 5 RAX 1 CXC1321121_R71AU01 nsssyci_mpbp 1,Slot=5,PlugInUni t=1,Program=CXC1321121_R71AU01 0 5 RAX 1 CXC1322173/1_R66A02 RAX 1,Slot=5,PlugInUnit=1,Program=CXC1322173/1_R66A02 0 5 RAX 1 CXC1323891/1_R96J01 lmbpp 1,Slot=5,PlugInUnit=1,Program=CXC1323891/1_R96J01 0 5 RAX 1 CXC1326498/3_R18C01 ecda_c64 1,Slot=5,PlugInUnit=1,Program=CXC1326498/3_R18C01 0 5 RaxDev=1 - CXP901085/1_R63B02 RAX_LMC_3 1,Slot=5,PlugInUnit=1,RaxDeviceGroup=1,DpProgram=CXP901085/1_R63B02-------------------------------------------------------------------------------------------------------------------------------------...------------------------------------------------------------------------------------------------------------------------------------- 0 11 TX6HS-06 1 CXC1725156_R71AV02 ebos 1,Slot=11,PlugInUnit=1,Program=CXC1725156_R71AV02 0 11 TX6HS-06 1 CXC1725467_R71AV02 i2copb 1,Slot=11,PlugInUnit=1,Program=CXC1725467_R71AV02 0 11 TX6HS-06 1 CXC1725310_R71AV03 bc_mp_bp 1,Slot=11,PlugInUnit=1,Program=CXC1725310_R71AV03 0 11 TX6HS-06 1 CXC1725501_R71AV02 bc_dbm2 1,Slot=11,PlugInUnit=1,Program=CXC1725501_R71AV02 0 11 TX6HS-06 1 CXC1725385_R71AV01 ics 1,Slot=11,PlugInUnit=1,Program=CXC1725385_R71AV01 0 11 TX6HS-06 1 CXC1725509_R71AV01 spas_basic_s 1,Slot=11,PlugInUnit=1,Program=CXC1725509_R71AV01 0 11 TX6HS-06 1 CXC1721518_R71AV01 dcs 1,Slot=11,PlugInUnit=1,Program=CXC1721518_R71AV01 0 11 TX6HS-06 1 CXC1321121_R71AU01 nsssyci_mpbp 1,Slot=11,PlugInUnit=1,Program=CXC1321121_R71AU01 0 11 TX6HS-06 1 CXC1323891/1_R96J01 lmbpp 1,Slot=11,PlugInUnit=1,Program=CXC1323891/1_R96J01 0 11 TX6HS-06 1 CXC1326498/3_R18C01 ecda_c64 1,Slot=11,PlugInUnit=1,Program=CXC1326498/3_R18C01 0 11 TX6HS-06 1 CXC1720530/7_R15B02 TX 1,Slot=11,PlugInUnit=1,Program=CXC1720530/7_R15B02 0 11 TxDev=1 - CXP9011041/9_R1AB03 TX 1,Slot=11,PlugInUnit=1,TxDeviceGroup=1,DpProgram=CXP9011041/9_R1AB03------------------------------------------------------------------------------------------------------------------------------------- 0 12 RUIF 1 CXC1725156_R71AV02 ebos 1,Slot=12,PlugInUnit=1,Program=CXC1725156_R71AV02 0 12 RUIF 1 CXC1725467_R71AV02 i2copb 1,Slot=12,PlugInUnit=1,Program=CXC1725467_R71AV02 0 12 RUIF 1 CXC1725310_R71AV03 bc_mp_bp 1,Slot=12,PlugInUnit=1,Program=CXC1725310_R71AV03 0 12 RUIF 1 CXC1725501_R71AV02 bc_dbm2 1,Slot=12,PlugInUnit=1,Program=CXC1725501_R71AV02 0 12 RUIF 1 CXC1725385_R71AV01 ics 1,Slot=12,PlugInUnit=1,Program=CXC1725385_R71AV01 0 12 RUIF 1 CXC1725509_R71AV01 spas_basic_s 1,Slot=12,PlugInUnit=1,Program=CXC1725509_R71AV01 0 12 RUIF 1 CXC1721518_R71AV01 dcs 1,Slot=12,PlugInUnit=1,Program=CXC1721518_R71AV01 0 12 RUIF 1 CXC1321121_R71AU01 nsssyci_mpbp 1,Slot=12,PlugInUnit=1,Program=CXC1321121_R71AU01 0 12 RUIF 1 CXC1123520/4_R2E01 epa 1,Slot=12,PlugInUnit=1,Program=CXC1123520/4_R2E01 0 12 RUIF 1 CXC1323891/1_R96J01 lmbpp 1,Slot=12,PlugInUnit=1,Program=CXC1323891/1_R96J01 0 12 RUIF 1 CXC1720957/1_R50J01 TuRnrbs 1,Slot=12,PlugInUnit=1,Program=CXC1720957/1_R50J01


0 12 RuifDev=1 - CXP9010472/2_R2C01 RUIF_LMC_2 1,Slot=12,PlugInUnit=1,RuifDeviceGroup=1,DpProgram=CXP9010472/2_R2C01-------------------------------------------------------------------------------------------------------------------------------------... 0 24 CBU 0 CXC1725446/1_R56K01 MPScc 1,Slot=24,PlugInUnit=1,Program=CXC1725446/1_R56K01 0 24 CBU 0 CXC1725447/1_R56S01 MPEc_CBU 1,Slot=24,PlugInUnit=1,Program=CXC1725447/1_R56S01 0 24 CBU 0 CXC1725448/1_R56Z01 MPNcc 1,Slot=24,PlugInUnit=1,Program=CXC1725448/1_R56Z01 0 24 CBU 0 CXC1727169/1_R56D01 PPAdapter 1,Slot=24,PlugInUnit=1,Program=CXC1727169/1_R56D01 0 24 Cbu=1 1 CXC1324236_R71AN06 iworx_fw 1,Slot=24,PlugInUnit=1,Cbu=1,ExchangeTerminal=1,Program=CXC1324236_R71AN06 0 24 Cbu=1 1 CXC1327682_R71AN06 iworx_sdfw 1,Slot=24,PlugInUnit=1,Cbu=1,ExchangeTerminal=1,Program=CXC1327682_R71AN06 0 24 Cbu=1 1 CXC1327683_R71AN04 tum_fpga_lm 1,Slot=24,PlugInUnit=1,Cbu=1,TimingUnit=1,Program=CXC1327683_R71AN04-------------------------------------------------------------------------------------------------------------------------------------

7.3.5 Example: RBS6201 LTE

enb17> inv

Node: RBS6201L CXP102051/10_R9Z L11A

=====================================================================================================================================SMN APN BOARD SWALLOCATION S OPER MAINT FAULT c/p d CPU PRODUCTNUMBER REV SERIAL MO===================================================================================================================================== 0 1 DUL3 main 1 ON OFF OFF 80% 31% 18% KDU137533/3 R2B C823389377 1,Slot=1-------------------------------------------------------------------------------------------------------------------------------------

=====================================================================================================================================XPBOARD ST OPER MAINT FAULT PRODUCTNUMBER REV SERIAL/NAME MO=====================================================================================================================================FANGROUP OFF Cabinet=1,FanGroup=1FANGROUP OFF Cabinet=1,FanGroup=2FANGROUP OFF Cabinet=1,FanGroup=3BFU 1 ON OFF BMG980337/1 R3E BR80846798 HwUnit=BFU-1PDU 1 ON OFF BMG980336/2 R4G C941000479 HwUnit=PDU-1PDU 1 ON OFF BMG980336/2 R4G C941000482 HwUnit=PDU-2PDU 0 ? ? HwUnit=PDU-3PSU 1 ON OFF BML161174/1 R3F BW93000752 HwUnit=PSU-1 (PSU AC)PSU 1 ON OFF BML161174/1 R3F BW93000780 HwUnit=PSU-2 (PSU AC)PSU 1 ON OFF BML161174/1 R3F BW93000586 HwUnit=PSU-3 (PSU AC)SCU 1 ON OFF BGM1361006/1 R2A A400901825 HwUnit=SCU-1RUS 1 ON 16HZ OFF KRC11830/1 R1C C823344442 RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RUL1RUS 1 ON 16HZ OFF KRC11830/1 R1C C823380784 RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RUL2RUS 1 ON 16HZ OFF KRC11830/1 R1B C823095816 RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RUL3RUS 1 ON 16HZ OFF KRC11830/1 R1B C823218842 RbsSubrack=1,RbsSlot=4,AuxPlugInUnit=RUL4RUS 1 ON 16HZ OFF KRC11830/1 R1B C823213279 RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RUL5RUS 1 ON 16HZ OFF KRC11830/1 R1B C823129166 RbsSubrack=1,RbsSlot=6,AuxPlugInUnit=RUL6


-------------------------------------------------------------------------------------------------------------------------------------

=====================================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE transmissionType maxPwr fanConfiguration position=====================================================================================================================================Subrack=1 0 Subrack ROJ999999 * ETHERNET_CABLE NO_CPP_FAN -------------------------------------------------------------------------------------------------------------------------------------

=====================================================================================================================================MO SMN PRODUCT PRODUCTNUMBER REV SERIAL/NAME DATE activeSwitchPlane switchState=====================================================================================================================================Subrack=1 0 Backplane -------------------------------------------------------------------------------------------------------------------------------------

....<cut>....=====================================================================================================================================SMN APN BOARDTYPE ST PRODUCTNUMBER_REV NAME MO===================================================================================================================================== 0 1 DUL 1 CXC1320781_R71CD01 database Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1320781_R71CD01-2 0 1 DUL 1 CXC1320782_R71CD03 equipment_re Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1320782_R71CD03-2 0 1 DUL 1 CXC1320783_R71CD01 http_server Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1320783_R71CD01-2 0 1 DUL 1 CXC1320784_R71CD01 jvm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1320784_R71CD01-2 0 1 DUL 1 CXC1320785_R71CD02 loaderserver Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1320785_R71CD02 0 1 DUL 1 CXC1320787_R71CD01 SystemManage Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1320787_R71CD01-2 0 1 DUL 1 CXC1321314_R71CD01 Sock Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1321314_R71CD01 0 1 DUL 1 CXC1321315_R71AZ01 Inet Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1321315_R71AZ01-2 0 1 DUL 1 CXC1321316_R71AZ01 Ethernet Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1321316_R71AZ01 0 1 DUL 1 CXC1321341_R71CD01 sw_installat Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1321341_R71CD01 0 1 DUL 1 CXC1321344_R71AU01 pms Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1321344_R71AU01 0 1 DUL 1 CXC1322165/12_R71CD01 48Vpowersup Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1322165/12_R71CD01 0 1 DUL 1 CXC1322506_R71AZ01 iput i l Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1322506_R71AZ01-2 0 1 DUL 1 CXC1323464_R71CD01 objectsuppor Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1323464_R71CD01 0 1 DUL 1 CXC1323891/2_R13C01 lmbpp Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1323891/2_R13C01 0 1 DUL 1 CXC1323911_R71CD02 Ssh Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1323911_R71CD02-2 0 1 DUL 1 CXC1325240/1_R71AZ01 sctp_adm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1325240/1_R71AZ01 0 1 DUL 1 CXC1325241/1_R71AZ01 sctp_host Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1325241/1_R71AZ01 0 1 DUL 1 CXC1325792_R71CD02 licensemanag Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1325792_R71CD02 0 1 DUL 1 CXC1326054_R71AZ02 target_monit Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1326054_R71AZ02 0 1 DUL 1 CXC1327705_R71AU01 DbAgent Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1327705_R71AU01 0 1 DUL 1 CXC1327846_R71CD02 ipcp_adm_lm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1327846_R71CD02 0 1 DUL 1 CXC1327943_R71AZ01 ipadm_lm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1327943_R71AZ01 0 1 DUL 1 CXC1329000/3_R1A01 lmatf_3 Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1329000/3_R1A01 0 1 DUL 1 CXC1720483_R71AZ01 ncli Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1720483_R71AZ01


0 1 DUL 1 CXC1721176_R71CD03 pm_agent Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1721176_R71CD03 0 1 DUL 1 CXC1724433_R71AZ03 i2cmpc Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1724433_R71AZ03 0 1 DUL 1 CXC1725156_R71CD03 ebos Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1725156_R71CD03 0 1 DUL 1 CXC1725190/7_R18D centralLm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1725190/7_R18D 0 1 DUL 1 CXC1725191/7_R18E cellLm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1725191/7_R18E 0 1 DUL 1 CXC1725192/7_R18D ncLm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1725192/7_R18D 0 1 DUL 1 CXC1725310_R71CD04 bc_mp_bp Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1725310_R71CD04 0 1 DUL 1 CXC1725398/7_R18C bbom Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1725398/7_R18C 0 1 DUL 1 CXC1725422/1_R7H02 ricm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1725422/1_R7H02 0 1 DUL 1 CXC1725489_R71CD04 bc_mp Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1725489_R71CD04 0 1 DUL 1 CXC1726076_R71CD01 etsec Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1726076_R71CD01 0 1 DUL 1 CXC1726078_R71CD02 board_cntr l _ Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1726078_R71CD02 0 1 DUL 1 CXC1726080_R71CD01 ics_gpm3 Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1726080_R71CD01 0 1 DUL 1 CXC1726088/7_R18D monitorLm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1726088/7_R18D 0 1 DUL 1 CXC1726212_R71AZ08 ipcbm_lm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1726212_R71AZ08 0 1 DUL 1 CXC1727010_R71AZ02 ie l l _bas ic_b Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1727010_R71AZ02 0 1 DUL 1 CXC1727219_R71AZ04 nsscbm Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1727219_R71AZ04 0 1 DUL 1 CXC1727220_R71CD02 nsstum2 Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1727220_R71CD02 0 1 DUL 1 CXC1727238_R71AZ01 iphost_cbm_l Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1727238_R71AZ01 0 1 DUL 1 CXC1727282_R71AZ01 iell_resourc Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1727282_R71AZ01 0 1 DUL 1 CXC1728185_R71AZ01 cbf2_fpgaloa Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1728185_R71AZ01 0 1 DUL 1 CXC1729152/2_R2S dulCtrl Subrack=1,Slot=1,PlugInUnit=1,Program=CXC1729152/2_R2S 0 1 DUL 1 CXP102066/2_R5B gic Subrack=1,Slot=1,PlugInUnit=1,Program=CXP102066/2_R5B 0 1 DUL 1 CXP9020272/7_R18C bbm_cont Subrack=1,Slot=1,PlugInUnit=1,Program=CXP9020272%7_R18C 0 1 Exchange=1 1 CXC1723376_R71AN06 bi f Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminal Ip=1,Program=CXC1723376_R71AN06 0 1 Exchange=1 1 CXC1726213_R71AZ05 app3342_lm Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,Program=CXC1726213_R71AZ05-------------------------------------------------------------------------------------------------------------------------------------

7.3.6 Filtering the output

OFFLINE> h inv

*******************************************************inv[hr] [<Filter>] [<stateFilter>]*******************************************************This command performs a HW/SW inventory via the MO interface. The output is similar to "cabsx" which provides a HW/SW inventory via the OSE she

Example: view only lines matching “slot=6”

RNC11> inv slot=6

=================================================================================================================SMN APN BOARDTYPE M SWALLOCATION ST PRODUCTNUMBER REV MO================================================================================================================= 0 6 ET-M4 ETM4 1 ROJ1192102/22 R1B Subrack=MS,Slot=6,PlugInUnit=1


-----------------------------------------------------------------------------------------------------------------

=================================================================================================================SMN APN BOARDTYPE ST PRODUCTNUMBER_REV NAME MO================================================================================================================= 0 6 ET-M4 1 CXC1322250_R51TK01 dbm2_cs_basi Subrack=MS,Slot=6,PlugInUnit=1,Program=CXC1322250_R51TK01 0 6 ET-M4 1 CXC1321121_R51GD01 nsssyci_mpbp Subrack=MS,Slot=6,PlugInUnit=1,Program=CXC1321121_R51GD01 0 6 ET- M4 1 CXC1329155_R51SN02 etm4v2atm Subrack=MS,Slot=6,PlugInUni t=1,Program=CXC1329155_R51SN02 0 6 ET-M4 1 CXC1328977_R51SN02 phym4v2bp Subrack=MS,Slot=6,PlugInUnit=1,Program=CXC1328977_R51SN02 0 6 Exchange=1 1 CXC1327678_R3B01 AMD4V2_FPGA Subrack=MS,Slot=6,PlugInUni t=1,ExchangeTerminal=1,Program=CXC1327678_R3B01----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Example: view only lines matching ”fax”

MGW1> inv fax

=================================================================================================================SMN APN BOARDTYPE ST PRODUCTNUMBER_REV NAME MO=================================================================================================================---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 73 7 MsDev=1 1 CXC1720519/5_R1D01 fax Subrack=3,Slot=7,PlugInUnit=1,MsDeviceGroup=1,Program=CXC1720519/5_R1D01----------------------------------------------------------------------------------------------------------------- 73 8 MsDev=1 1 CXC1720519/5_R1D01 fax Subrack=3,Slot=8,PlugInUnit=1,MsDeviceGroup=1,Program=CXC1720519/5_R1D01----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Example: view only lines matchin ”_gra”

MGW1> inv _gra

=================================================================================================================SMN APN BOARDTYPE ST PRODUCTNUMBER_REV NAME MO================================================================================================================= 0 25 GPB40 1 CXC1327888/6_R7A02 msp_crh_gra Subrack=1,Slot=25,PlugInUnit=1,Program=CXC1327888/6_R7A02---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1 2 GPB40 1 CXC1327888/6_R7A02 msp_crh_gra Subrack=2,Slot=2,PlugInUnit=1,Program=CXC1327888/6_R7A02----------------------------------------------------------------------------------------------------------------- 1 3 GPB40 1 CXC1327888/6_R7A02 msp_crh_gra Subrack=2,Slot=3,PlugInUnit=1,Program=CXC1327888/6_R7A02-----------------------------------------------------------------------------------------------------------------


----------------------------------------------------------------------------------------------------------------- 73 2 GPB40 1 CXC1327888/6_R7A02 msp_crh_gra Subrack=3,Slot=2,PlugInUnit=1,Program=CXC1327888/6_R7A02----------------------------------------------------------------------------------------------------------------- 73 3 GPB40 1 CXC1327888/6_R7A02 msp_crh_gra Subrack=3,Slot=3,PlugInUnit=1,Program=CXC1327888/6_R7A02----------------------------------------------------------------------------------------------------------------- 73 4 GPB40 1 CXC1327888/6_R7A02 msp_crh_gra Subrack=3,Slot=4,PlugInUnit=1,Program=CXC1327888/6_R7A02----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Example: view only HW/SW that is locked or disabled

OFFLINE> h inv

*******************************************************inv[hr] [<Filter>] [<stateFilter>]*******************************************************This command performs a HW/SW inventory via the MO interface. The output is similar to "cabsx" which provides a HW/SW inventory via the OSE she

RNC11> inv . 0|L

=================================================================================================================SMN APN BOARDTYPE M SWALLOCATION ST PRODUCTNUMBER REV MO================================================================================================================= 0 5 TUB TUB 0 ROJ1192104/3 R4E Subrack=MS,Slot=5,PlugInUnit=1-----------------------------------------------------------------------------------------------------------------

=================================================================================================================SMN APN BOARDTYPE ST PRODUCTNUMBER_REV NAME MO================================================================================================================= 0 5 TUB 0 CXC1321122/21_R50HF01 nsstu_21_bp Subrack=MS,Slot=5,PlugInUnit=1,Program=nsstu_21_bp 0 5 TUB 0 CXC1321794_R50HF01 aal0_term_tu Subrack=MS,Slot=5,PlugInUnit=1,Program=aal0_term_tu 0 5 TUB 0 CXC1321451_R50HX06 dbm_cs_basic Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1321451_R50HX06 0 5 TUB 0 CXC1321121_R50HF01 nsssyci_mpbp Subrack=MS,Slot=5,PlugInUnit=1,Program=nsssyci_mpbp 0 5 TUB 0 CXC1322025_R50HX01 dbm_fpgaload Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1322025_R50HX01 0 5 TUB 0 CXC1329867_R4J02 RncLmTas Subrack=MS,Slot=5,PlugInUnit=1,Program=CXC1329867_R4J02 0 5 Timing=1 0 CXC1321123_R50BL03 nsstu_fpga Subrack=MS,Slot=5,PlugInUnit=1,TimingUnit=1,Program=nsstu_fpga-----------------------------------------------------------------------------------------------------------------


7.4 bo command

MGW-F> bo

================================================================================================================================00 BoardType SwAllocation 01 BoardType SwAllocation 65 BoardType SwAllocation ================================================================================================================================00 SCB3 MGW_SCB3 00 SCB3 MGW_SCB3 00 SCB3 MGW_SCB3 01 SCB3 MGW_SCB3 01 SCB3 MGW_SCB3 01 SCB3 MGW_SCB3 02 GPB53 MGW_MS_GPB_02 02 GPB53 MGW_MOD_GPB_02 02 GPB53 MGW_MOD_GPB_02 03 GPB53 MGW_MS_GPB_03 03 GPB53 MGW_MOD_GPB_03 03 GPB53 MGW_MOD_GPB_03 04 TUB MGW_TUB 04 MSB3 MGW_MSB3_Profile_11 04 MSB3 MGW_MSB3_Profile_11 05 TUB MGW_TUB 05 MSB3 MGW_MSB3_Profile_11 05 MSB3 MGW_MSB3_Profile_11 06 GPB53 MGW_MS_GPB_06 06 MSB3 MGW_MSB3_Profile_8 06 MSB3 MGW_MSB3_Profile_8 07 GPB53 MGW_MS_GPB_07 07 MSB3 MGW_MSB3_Profile_3 07 MSB3 MGW_MSB3_Profile_3 08 GPB53 MGW_MS_GPB_08 08 MSB3 MGW_MSB3_Profile_3 08 MSB3 MGW_MSB3_Profile_3 09 GPB53 MGW_MS_GPB_09 09 MSB3 MGW_MSB3_Profile_3 09 MSB3 MGW_MSB3_Profile_3 10 GPB53 MGW_MS_GPB_10 10 MSB3 MGW_MSB3_Profile_3 10 MSB3 MGW_MSB3_Profile_3 11 GPB53 MGW_MS_GPB_11 11 MSB3 MGW_MSB3_Profile_3 11 MSB3 MGW_MSB3_Profile_3 12 GPB53 MGW_MS_GPB_12 12 MSB3 MGW_MSB3_Profile_3 12 MSB3 MGW_MSB3_Profile_3 13 GPB53 MGW_MS_GPB_13 13 MSB3 MGW_MSB3_Profile_8 13 MSB3 MGW_MSB3_Profile_8 14 SXB3 MGW_SXB3_Main 14 MSB3 MGW_MSB3_Profile_3 14 MSB3 MGW_MSB3_Profile_3 15 SXB3 MGW_SXB3_Main 15 MSB3 MGW_MSB3_Profile_3 15 MSB3 MGW_MSB3_Profile_3 16 SXB3 MGW_SXB3_Main 16 MSB3 MGW_MSB3_Profile_10 16 MSB3 MGW_MSB3_Profile_10 17 SXB3 MGW_SXB3_Main 17 MSB3 MGW_MSB3_Profile_10 17 MSB3 MGW_MSB3_Profile_10 18 SXB3 MGW_SXB3_Main 18 MSB3 MGW_MSB3_Profile_10 18 MSB3 MGW_MSB3_Profile_10 19 SXB3 MGW_SXB3_Main 19 ET-MFG MGW_ET_MFG 19 ET-MFG MGW_ET_MFG 20 SXB3 MGW_SXB3_Main 20 ET-MFG MGW_ET_MFG 20 ET-MFG MGW_ET_MFG 21 SXB3 MGW_SXB3_Main 21 ET-M4 MGW_ET_M4 21 ET-M4 MGW_ET_M4 22 SXB3 MGW_SXB3_Main 22 ET-M4 MGW_ET_M4 22 ET-M4 MGW_ET_M4 23 SXB3 MGW_SXB3_Main 23 ET-M4 MGW_ET_M4 23 ET-M4 MGW_ET_M4 24 SXB3 MGW_SXB3_Main 24 ET-C41 MGW_ET_C414 24 ET-C41 MGW_ET_C414 25 SXB3 MGW_SXB3_Main 25 ET-C41 MGW_ET_C414 25 ET-C41 MGW_ET_C414 26 SXB3 MGW_SXB3_Main 26 ET-C41 MGW_ET_C414 26 ET-C41 MGW_ET_C414 27 ET-MC1 MGW_ET_MC1 27 SXB3 MGW_SXB3_Device 27 SXB3 MGW_SXB3_Device ================================================================================================================================73 BoardType SwAllocation 89 BoardType SwAllocation 97 BoardType SwAllocation ================================================================================================================================00 SCB3 MGW_SCB3 00 SCB3 MGW_SCB3 00 SCB3 MGW_SCB3 01 SCB3 MGW_SCB3 01 SCB3 MGW_SCB3 01 SCB3 MGW_SCB3


02 GPB53 MGW_MOD_GPB_02 02 GPB53 MGW_MOD_GPB_02 02 ET-M4 MGW_ET_M4 03 GPB53 MGW_MOD_GPB_03 03 GPB53 MGW_MOD_GPB_03 03 ET-M4 MGW_ET_M4 04 MSB3 MGW_MSB3_Profile_11 04 MSB3 MGW_MSB3_Profile_11 04 ET-M4 MGW_ET_M4 05 MSB3 MGW_MSB3_Profile_11 05 MSB3 MGW_MSB3_Profile_11 05 ET-M4 MGW_ET_M4 06 MSB3 MGW_MSB3_Profile_8 06 MSB3 MGW_MSB3_Profile_8 06 ET-M4 MGW_ET_M4 07 MSB3 MGW_MSB3_Profile_3 07 MSB3 MGW_MSB3_Profile_3 07 ET-M4 MGW_ET_M4 08 MSB3 MGW_MSB3_Profile_3 08 MSB3 MGW_MSB3_Profile_3 08 ET-M4 MGW_ET_M4 09 MSB3 MGW_MSB3_Profile_3 09 MSB3 MGW_MSB3_Profile_3 09 ET-M4 MGW_ET_M4 10 MSB3 MGW_MSB3_Profile_3 10 MSB3 MGW_MSB3_Profile_3 10 ET-M4 MGW_ET_M4 11 MSB3 MGW_MSB3_Profile_3 11 MSB3 MGW_MSB3_Profile_3 11 ET-M4 MGW_ET_M4 12 MSB3 MGW_MSB3_Profile_3 12 MSB3 MGW_MSB3_Profile_3 13 MSB3 MGW_MSB3_Profile_8 13 MSB3 MGW_MSB3_Profile_8 14 MSB3 MGW_MSB3_Profile_3 14 MSB3 MGW_MSB3_Profile_3 15 MSB3 MGW_MSB3_Profile_3 15 MSB3 MGW_MSB3_Profile_3 15 ET-MC1 MGW_ET_MC1 16 MSB3 MGW_MSB3_Profile_10 16 MSB3 MGW_MSB3_Profile_10 16 ET-MC1 MGW_ET_MC1 17 MSB3 MGW_MSB3_Profile_10 17 MSB3 MGW_MSB3_Profile_10 17 ET-MC41 MGW_ET_MC41 18 MSB3 MGW_MSB3_Profile_10 18 MSB3 MGW_MSB3_Profile_10 19 ET-MFG MGW_ET_MFG 19 ET-MFG MGW_ET_MFG 19 ET-MC41 MGW_ET_MC41 20 ET-MFG MGW_ET_MFG 20 ET-MFG MGW_ET_MFG 21 ET-M4 MGW_ET_M4 21 ET-M4 MGW_ET_M4 21 ET-MC41 MGW_ET_MC41 22 ET-M4 MGW_ET_M4 22 ET-M4 MGW_ET_M4 23 ET-M4 MGW_ET_M4 23 ET-M4 MGW_ET_M4 23 ET-MC41 MGW_ET_MC41 24 ET-C41 MGW_ET_C414 24 ET-C41 MGW_ET_C414 25 ET-C41 MGW_ET_C414 25 ET-C41 MGW_ET_C414 25 ET-C41 MGW_ET_C414 26 ET-C41 MGW_ET_C414 26 ET-C41 MGW_ET_C414 26 ET-C41 MGW_ET_C414 27 SXB3 MGW_SXB3_Device 27 SXB3 MGW_SXB3_Device 27 SXB3 MGW_SXB3_Device

RNC-F> bo

================================================================================================================================00 M BoardType Devs SwAllocation 01 M BoardType Devs SwAllocation 02 M BoardType Devs SwAllocation ================================================================================================================================00 SCB3 SCB 00 SCB3 SCB 00 SCB3 SCB 01 SCB3 SCB 01 SCB3 SCB 01 SCB3 SCB 02 SXB3 SXB 02 ET-M4 ETM4 02 ET-M4 ETM4 03 SXB3 SXB 04 TUB TUB 05 TUB TUB 06 ET-M4 ETM4 06 SPB21 CDDDD SPB_TYPE_B 06 SPB21 CDDDD SPB_TYPE_B 07 ET-M4 ETM4 07 SPB21 CDDDD SPB_TYPE_B 07 SPB21 CDDDD SPB_TYPE_B 08 GPB43 GPB_SCCP_ITU 08 SPB21 CDDDD SPB_TYPE_B 08 SPB21 CDDDD SPB_TYPE_B 09 GPB43 GPB_SCCP_ITU 09 SPB21 CDDDD SPB_TYPE_B 09 SPB21 CDDDD SPB_TYPE_B 10 GPB43 GPB_Central_E1_ITU 10 SPB21 CDDDD SPB_TYPE_B 10 SPB21 CDDDD SPB_TYPE_B


11 GPB43 GPB_Central_E1_ITU 12 GPB43 GPB_OM 12 9 GPB43 GPB_Module 12 11 GPB43 GPB_Module 13 GPB43 GPB_OM 13 2 GPB43 GPB_Module 13 5 GPB43 GPB_Module 14 1 GPB43 GPB_Module 14 3 GPB43 GPB_Module 14 6 GPB43 GPB_Module 15 13 GPB43 GPB_Module 15 4 GPB43 GPB_Module 15 7 GPB43 GPB_Module 16 8 GPB43 GPB_Module 16 15 GPB43 GPB_Module 16 25 GPB43 GPB_Module 17 GPB43 GPB_RANAP_RNSAP 17 10 GPB43 GPB_Module 17 12 GPB43 GPB_Module 18 GPB43 GPB_RANAP_RNSAP 19 SPB21 PCDDD SPB_TYPE_A 19 SPB21 CDDDD SPB_TYPE_B 19 SPB21 CDDDD SPB_TYPE_B 20 SPB21 PCDDD SPB_TYPE_A 20 SPB21 CDDDD SPB_TYPE_B 20 SPB21 CDDDD SPB_TYPE_B 21 SPB21 PCDDD SPB_TYPE_A 21 SPB21 CDDDD SPB_TYPE_B 21 SPB21 CDDDD SPB_TYPE_B 22 SPB21 PCDDD SPB_TYPE_A 22 SPB21 CDDDD SPB_TYPE_B 22 SPB21 CDDDD SPB_TYPE_B 23 SPB21 PCDDD SPB_TYPE_A 23 SPB21 CDDDD SPB_TYPE_B 23 SPB21 CDDDD SPB_TYPE_B 24 ET-MFG ETMFG 25 ET-MFG ETMFG 26 ET-M4 ETM4 26 ET-M4 ETM4 26 ET-M4 ETM4 27 ET-M4 ETM4 27 ET-M4 ETM4 27 ET-M4 ETM4 ================================================================================================================================11 M BoardType Devs SwAllocation 12 M BoardType Devs SwAllocation 09 M BoardType Devs SwAllocation ================================================================================================================================00 SCB3 SCB 00 SCB3 SCB 00 SCB3 SCB 01 SCB3 SCB 01 SCB3 SCB 01 SCB3 SCB 02 ET-M4 ETM4 02 ET-M4 ETM4 02 ET-M4 ETM4 06 SPB21 CDDDD SPB_TYPE_B 06 SPB21 CDDDD SPB_TYPE_B 06 SPB21 CDDDD SPB_TYPE_B 07 SPB21 CDDDD SPB_TYPE_B 07 SPB21 CDDDD SPB_TYPE_B 07 SPB21 CDDDD SPB_TYPE_B 08 SPB21 CDDDD SPB_TYPE_B 08 SPB21 CDDDD SPB_TYPE_B 08 SPB21 CDDDD SPB_TYPE_B 09 SPB21 CDDDD SPB_TYPE_B 09 SPB21 CDDDD SPB_TYPE_B 09 SPB21 CDDDD SPB_TYPE_B 10 SPB21 CDDDD SPB_TYPE_B 10 SPB21 CDDDD SPB_TYPE_B 10 SPB21 CDDDD SPB_TYPE_B 12 30 GPB43 GPB_Module 12 40 GPB43 GPB_Module 12 50 GPB43 GPB_Module 13 31 GPB43 GPB_Module 13 41 GPB43 GPB_Module 13 51 GPB43 GPB_Module 14 32 GPB43 GPB_Module 14 42 GPB43 GPB_Module 14 52 GPB43 GPB_Module 15 33 GPB43 GPB_Module 15 43 GPB43 GPB_Module 15 53 GPB43 GPB_Module 16 35 GPB43 GPB_Module 16 45 GPB43 GPB_Module 16 55 GPB43 GPB_Module 17 34 GPB43 GPB_Module 17 44 GPB43 GPB_Module 17 54 GPB43 GPB_Module 19 SPB21 CDDDD SPB_TYPE_B 19 SPB21 CDDDD SPB_TYPE_B 19 SPB21 CDDDD SPB_TYPE_B 20 SPB21 CDDDD SPB_TYPE_B 20 SPB21 CDDDD SPB_TYPE_B 20 SPB21 CDDDD SPB_TYPE_B 21 SPB21 CDDDD SPB_TYPE_B 21 SPB21 CDDDD SPB_TYPE_B 21 SPB21 CDDDD SPB_TYPE_B 22 SPB21 CDDDD SPB_TYPE_B 22 SPB21 CDDDD SPB_TYPE_B 22 SPB21 CDDDD SPB_TYPE_B 23 SPB21 CDDDD SPB_TYPE_B 23 SPB21 CDDDD SPB_TYPE_B 23 SPB21 CDDDD SPB_TYPE_B 26 ET-M4 ETM4 26 ET-M4 ETM4 26 ET-M4 ETM4 27 ET-M4 ETM4


7.5 cab command

RNC11> h cab

*******************************************************cab[slxradgtmeh] [ | <unix cmds>]*******************************************************Display of miscellaneous COLI printouts relating to hw, sw, restarts, leds, cpu load, errors, disk/ram usage

The cab command offers a number of options, it is possible to combine several options, eg:cabslxrdg, cablx, cabxs, etc.The command "cabslxrdgm" will give the maximum amount of information.

Options: cab/cabh : prints MP/BP HW info and led status, MP temperature, and coreMgr status cabt : same as cab/cabh but without the temperature cabx : same as cab/cabh plus led and hw info for the XP boards (eg: TMA, MCPA, Fans, etc.) cabs : same as cab/cabh plus list of programs running in all MP/BP cabl : MP/BP/SP processor load cabr : prints all MP/BP restarts grouped by board. To see this info in chronological order, use the command "lgg". caba : prints only abnormal MP/BP restarts. cabd : print disk usage. Disks that are getting over a certain limit will appear in color. cabg : print MP/BP HW errors (e.g. faulty disk, faulty RAM, etc). cabm : print MP/BP RAM memory usage. cabe : print MP/BP added T&E trace conditions. Superceded by "fte s" command. Type "h fte" for info.

The following OSE commands are run and parsed by the various "cab" functions: cab/cabh : pboot sh par, vii, mirror s, ppctemp, boardtemp cabt : pboot sh par, vii, mirror s cabx : pboot sh par, vii, mirror s, ps port*, par get SYS_HW*, listObj subrack, getAttrObj subrack. cabs : pboot sh par, vii, mirror s, listloaded cabl : pboot sh par, capi prio cabr : llog -l caba : llog -l. Only restarts with error code not matching 0xB0AD or 1010[9-F] or containing a PMD are printed. cabd : vols. cabg : pboot sh par, dumpelg cabm : pboot sh par, mmu, mm - p cabe : pboot sh par, te s, te s - restart

...<cut>..

7.5.1 Example: RNC


RNC11> cabsx

=====================================================================================================SMN APN BOARD OPER MAINT FAULT PRODUCT NR REV DATE SERIAL NR TEMP COREMGR===================================================================================================== 0 1 SCB ON OFF OFF ROJ 119 2108/2 R6F 02W40 S951911044 0 4 TUB ON OFF OFF ROJ 119 2104/3 R4E 02W44 TU80681217 0 5 TUB ON OFF OFF ROJ 119 2104/3 R4E 02W44 TU80680366 0 6 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 03W09 T012252294 0 7 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20040628 TU83740214 0 8 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W27 TU81564465 +27C 0 9 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887795 +29C 0 10 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887746 +27C Active* 0 11 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887682 +27C StandbyReady 0 12 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81889978 +37C 0 13 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887858 +29C 0 14 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887852 +27C 0 15 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887818 +29C 0 16 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887854 +27C 0 17 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887814 +29C 0 18 GPB3 ON OFF OFF ROJ 119 2106/3 R2H 03W39 TU81887745 +27C 0 19 SPB ON 16HZ OFF ROJ 119 2103/2 R6G 02W21 T011672710 0 20 SPB ON 16HZ OFF ROJ 119 2103/2 R6G 02W36 T011907936 0 22 SPB ON 16HZ OFF ROJ 119 2103/2 R6G 02W36 T011907937 0 23 SPB ON 16HZ OFF ROJ 119 2103/2 R6G 02W31 T011844610 0 26 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 03W09 T012252244 0 27 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 03W09 T012252243 0 0 SCB ON OFF OFF ROJ 119 2108/2 R6F 02W40 S951911064 -----------------------------------------------------------------------------------------------------

============================================================================================SMN APN BOARD SOFTWARE============================================================================================ 0 1 SCB 1 CXC1321451_R50HX06 dbm_cs_basic (flash) 0 1 SCB 2 CXC1322025_R50HX01 dbm_fpga_loaderpatch (flash) 0 1 SCB 3 CXC1322166%2_R50HX01 ATF1_CXC1322166_2 0 1 SCB 4 CXC1321407_R50HX01 SPAS-LINK-LM_CXC1321407 0 1 SCB 5 CXC1321409_R50HX01 SPAS-SM-LM_CXC1321409 0 1 SCB 6 CXC1322165%12_R50HX01 48VPOWSUP1_CXC1322165_12 0 1 SCB 7 CXC1321120_R50HF01 NSS-BP-SCB-SXB_CXC1321120 0 1 SCB 8 CXC1321121_R50HF01 NSS-BP-SC-USER_CXC1321121--------------------------------------------------------------------------------------------


0 4 TUB 1 CXC1321451_R50HX06 dbm_cs_basic (flash) 0 4 TUB 2 CXC1322025_R50HX01 dbm_fpga_loaderpatch (flash) 0 4 TUB 3 CXC1321121_R50HF01 NSS-BP-SC-USER_CXC1321121 0 4 TUB 4 CXC1321122%21_R50HF01 NSS-BP-TU_CXC1321122_21 0 4 TUB 5 CXC1321794_R50HF01 AAL0-TERM-LM_CXC1321794 0 4 TUB 6 CXC1329867_R4J02 standard-------------------------------------------------------------------------------------------- 0 5 TUB 1 CXC1321451_R50HX06 dbm_cs_basic (flash) 0 5 TUB 2 CXC1322025_R50HX01 dbm_fpga_loaderpatch (flash) 0 5 TUB 3 CXC1321121_R50HF01 NSS-BP-SC-USER_CXC1321121 0 5 TUB 4 CXC1321122%21_R50HF01 NSS-BP-TU_CXC1321122_21 0 5 TUB 5 CXC1321794_R50HF01 AAL0-TERM-LM_CXC1321794 0 5 TUB 6 CXC1329867_R4J02 standard-------------------------------------------------------------------------------------------- 0 6 ET-M4 1 CXC1321451_R50HX06 dbm_cs_basic (flash) 0 6 ET-M4 2 CXC1322025_R50HX01 dbm_fpga_loaderpatch (flash) 0 6 ET-M4 3 CXC1321121_R50HF01 NSS-BP-SC-USER_CXC1321121 0 6 ET-M4 4 CXC1324171_R50HF01 PHYM4BP1_CXC1324171 0 6 ET-M4 5 CXC1324974%2_R50HF02 ETM4ATM-LM_CXC1324974_2-------------------------------------------------------------------------------------------- 0 7 ET-M4 1 CXC1321451_R50HX06 dbm_cs_basic (flash) 0 7 ET-M4 2 CXC1322025_R50HX01 dbm_fpga_loaderpatch (flash) 0 7 ET-M4 3 CXC1321121_R50HF01 NSS-BP-SC-USER_CXC1321121 0 7 ET-M4 4 CXC1324171_R50HF01 PHYM4BP1_CXC1324171 0 7 ET-M4 5 CXC1324974%2_R50HF02 ETM4ATM-LM_CXC1324974_2-------------------------------------------------------------------------------------------- 0 8 GPB3 1 CXC1321447_R50HX06 gpb_cs_basic (flash) 0 8 GPB3 2 CXC1322812_R50HX01 gpb_pqii_patch (flash) 0 8 GPB3 3 CXC1320787_R50HX02 SYSMGRAGENT1_CXC1320787 0 8 GPB3 4 CXC1327705_R50HX01 DBAGENT1_CXC1327705 0 8 GPB3 5 CXC1320742_R50HC03 SPAS-CONNECTION-LM_CXC1320742 0 8 GPB3 6 CXC1321121_R50HF01 NSS-BP-SC-USER_CXC1321121 0 8 GPB3 7 CXC1320995%31_R50HF01 AAL5-TERM--LM_CXC1320995_31 0 8 GPB3 8 CXC1321172_R50HB02 NSAALSERVER_CXC1321172 0 8 GPB3 9 CXC1322417%12_R50HF01 AAL2AP-LM_CXC1322417_12 0 8 GPB3 10 CXC1321142_R50HB03 SCCITUSERVER_CXC1321142 0 8 GPB3 11 CXC1325241%1_R50HB03 SCTPHOST_CXC1325241_1 0 8 GPB3 12 CXC1327928_R50HD01 IPHOST-GPB_CXC1327928-------------------------------------------------------------------------------------------- 0 9 GPB3 1 CXC1321447_R50HX06 gpb_cs_basic (flash) 0 9 GPB3 2 CXC1322812_R50HX01 gpb_pqii_patch (flash) 0 9 GPB3 3 CXC1320787_R50HX02 SYSMGRAGENT1_CXC1320787 0 9 GPB3 4 CXC1327705_R50HX01 DBAGENT1_CXC1327705 0 9 GPB3 5 CXC1320742_R50HC03 SPAS-CONNECTION-LM_CXC1320742 0 9 GPB3 6 CXC1321121_R50HF01 NSS-BP-SC-USER_CXC1321121


0 9 GPB3 7 CXC1320995%31_R50HF01 AAL5-TERM--LM_CXC1320995_31 0 9 GPB3 8 CXC1321172_R50HB02 NSAALSERVER_CXC1321172 0 9 GPB3 9 CXC1322417%12_R50HF01 AAL2AP-LM_CXC1322417_12...<cut>... 0 0 SCB 2 CXC1322025_R50HX01 dbm_fpga_loaderpatch (flash) 0 0 SCB 3 CXC1322166%2_R50HX01 ATF1_CXC1322166_2 0 0 SCB 4 CXC1321407_R50HX01 SPAS-LINK-LM_CXC1321407 0 0 SCB 5 CXC1321409_R50HX01 SPAS-SM-LM_CXC1321409 0 0 SCB 6 CXC1322165%12_R50HX01 48VPOWSUP1_CXC1322165_12 0 0 SCB 7 CXC1321120_R50HF01 NSS-BP-SCB-SXB_CXC1321120 0 0 SCB 8 CXC1321121_R50HF01 NSS-BP-SC-USER_CXC1321121--------------------------------------------------------------------------------------------

================================================================SMN ProductNr Rev Name Date SerialNr================================================================ 0 2/BFD 742 2018 R1A Subrack 01W05 Cello 2 HW 0 ROJ 605 107/1 R4A BACKPLANE 01W08 T821112404----------------------------------------------------------------

=================================================================================================================SMN APN PORT BOARD OPER MAINT FAULT PRODUCT NR REV DATE SERIAL NR ================================================================================================================= 0 1 port_0_dev_7 HW product name steady off off BKV301471/1 R1A01 HW product date HW product serial number -----------------------------------------------------------------------------------------------------------------

7.5.2 Example: MGW

MGW1> cabsx

=====================================================================================================SMN APN BOARD OPER MAINT FAULT PRODUCT NR REV DATE SERIAL NR TEMP COREMGR===================================================================================================== 0 1 SCB3 ON OFF OFF ROJ 119 2108/4 R2C 20060610 TU88998898 +28C 0 2 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494504 +32C Active* 0 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20041103 TU84971473 +31C StandbyReady 0 4 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050105 TU85369275 0 5 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050105 TU85369262


0 6 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050110 TU85413618 +34C 0 7 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414609 +34C 0 8 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414526 +34C 0 9 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414507 +33C 0 10 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85415931 +33C 0 11 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414527 +33C 0 12 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85415934 +33C 0 13 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050110 TU85413680 +34C 0 17 SXB3 ON OFF OFF ROJ 119 2109/3 R1C 20060606 TU88953444 +27C 0 18 SXB3 ON OFF OFF ROJ 119 2109/3 R1C 20060619 TU89063202 +26C 0 19 SXB3 ON OFF OFF ROJ 119 2109/3 R1C 20060619 TU89062952 +26C 0 20 SXB3 ON OFF OFF ROJ 119 2109/3 R1C 20060619 TU89062860 +26C 0 24 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414505 +33C 0 25 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414479 +33C 0 26 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414562 +33C 0 27 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414473 +33C 0 0 SCB3 ON OFF OFF ROJ 119 2108/4 R2C 20060610 TU88999234 +28C ----------------------------------------------------------------------------------------------------- 1 1 SCB3 ON OFF OFF ROJ 119 2108/4 R2C 20060619 TU89059257 +25C 1 2 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85415923 +31C 1 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414545 +32C 1 4 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85427083 1 5 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85427146 1 6 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050329 TU85851011 1 7 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050114 TU85439300 1 8 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426925 1 9 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426921 1 10 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426903 1 11 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426930 1 12 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85427142 1 13 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426919 1 14 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85427147 1 15 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426952 1 16 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426917 1 17 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426927 1 18 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050112 TU85426870 1 21 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050112 T013567013 1 23 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050112 T013566941 1 25 ET-MC1 ON OFF OFF ROJ 119 2163/1 R5A 20041204 T013512145 1 26 ET-MC1 ON OFF OFF ROJ 119 2163/1 R5A 20040422 T013055247 1 27 SXB3 ON OFF OFF ROJ 119 2109/3 R1C 20060619 TU89062826 +23C 1 0 SCB3 ON OFF OFF ROJ 119 2108/4 R2C 20060610 TU88998979 +24C ----------------------------------------------------------------------------------------------------- 73 1 SCB3 ON OFF OFF ROJ 119 2108/4 R2C 20060610 TU88998895 +29C 73 2 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20041211 TU85258410 +31C


73 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414543 +35C 73 4 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414565 +35C 73 5 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414501 +36C 73 6 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050111 TU85414546 +36C 73 7 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063194090 +36C 73 8 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063194093 +36C 73 9 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063194092 +34C 73 10 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063194091 +34C 73 11 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063194086 +34C 73 12 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193932 +35C 73 13 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193929 +36C 73 14 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193937 +36C 73 15 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193938 +38C 73 16 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193933 +38C 73 17 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193934 +36C 73 18 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193909 +36C 73 19 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193916 +33C 73 20 MSB3 ON OFF OFF ROJ1192201/1 R6C 05W05 A063193910 +33C 73 21 MSB3 ON OFF OFF ROJ1192201/1 R6C 20050518 A063234679 +33C 73 23 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050113 T013568215 73 25 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050112 T013566938 73 27 SXB3 ON OFF OFF ROJ 119 2109/3 R1C 20060619 TU89062858 +30C 73 0 SCB3 ON OFF OFF ROJ 119 2108/4 R2C 20060610 TU88999295 +31C -----------------------------------------------------------------------------------------------------

================================================================SMN ProductNr Rev Name Date SerialNr================================================================ 0 BFD 508 01/33 R1A Hub 01W05 MGW HW 0 ROJ 605 107/1 R4A BACKPLANE 01W32 T821137428 1 BFD 508 01/33 R1A Ext 01W05 MGW HW 1 ROJ 605 107/1 R5A BACKPLANE 04W44 X910109313 2 BFD 508 01/33 R1A Ext 01W05 MGW HW 2 ROJ 605 107/1 R5A BACKPLANE 04W44 X910109339----------------------------------------------------------------

============================================================================================SMN APN BOARD SOFTWARE============================================================================================ 0 1 SCB3 1 CXC1322250_R61HH05 dbm2_cs_basic (flash) 0 1 SCB3 2 CXC1322166%3_R61HH02 atf.ppc405 0 1 SCB3 3 CXC1321407_R61HH04 spas_link.ppc 0 1 SCB3 4 CXC1321409_R61HH02 spas_sm.ppc 0 1 SCB3 5 CXC1322165%12_R61HH02 48Vpowersup.ppc 0 1 SCB3 6 CXC1721176_R61HH03 pm_agent.ppc


0 1 SCB3 7 CXC1321120_R61CN02 nssscb_bp.ppc 0 1 SCB3 8 CXC1321121_R61ES03 nsssyci_mpbp.ppc-------------------------------------------------------------------------------------------- 0 2 GPB40 1 CXC1320785_R61HH02 loaderserver.ppc 0 2 GPB40 2 CXC1321447_R61HH07 gpb_cs_basic (flash) 0 2 GPB40 3 CXC1322812_R61HH01 gpb_pqi i_patch (f lash)...<cut>... 73 0 SCB3 4 CXC1321409_R61HH02 spas_sm.ppc 73 0 SCB3 5 CXC1322165%12_R61HH02 48Vpowersup.ppc 73 0 SCB3 6 CXC1721176_R61HH03 pm_agent.ppc 73 0 SCB3 7 CXC1321120_R61CN02 nssscb_bp.ppc 73 0 SCB3 8 CXC1321121_R61ES03 nsssyci_mpbp.ppc--------------------------------------------------------------------------------------------

=================================================================================================================SMN APN PORT BOARD OPER MAINT FAULT PRODUCT NR REV DATE SERIAL NR ================================================================================================================= 0 1 port_0_dev_1 MACU XALM steady off off ZHA90134/1 R2A 20050117 A442000783 -----------------------------------------------------------------------------------------------------------------

7.5.3 Example: WRBS

RBS3206> cabsx

=====================================================================================================SMN APN BOARD OPER MAINT FAULT PRODUCT NR REV DATE SERIAL NR TEMP COREMGR===================================================================================================== 0 1 CBU1 ON 16HZ OFF ROJ 119 2209/1 R3A 20050111 T013564989 +22C * 0 2 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20040721 TU83929644 0 3 ET-MC1 2HZ OFF OFF ROJ 119 2163/1 R5A 20040624 T013210130 0 6 RAX ON OFF OFF ROJ 119 2187/14 R1C 20080502 AE57656891 0 7 RAX ON OFF OFF ROJ 119 2187/12 R1A 20040907 AE51259350 0 8 RAX ON OFF OFF ROJ 119 2187/2 R2A 20040305 AE50727282 0 9 RAX ON OFF OFF ROJ 119 2187/12 R1A 20040907 AE51259362 0 10 TX6HS-04 ON 16HZ OFF ROJ 119 2254/4 R1C 20051031 AE52265554 0 11 TX6HS-03 ON 16HZ OFF ROJ 119 2254/3 R2C 20050424 AE51792478 0 12 RUIF ON 16HZ OFF ROJ 119 2245/1 R1C 20050215 AE51651770 0 22 ET-MC1 2HZ ON OFF ROJ 119 2163/1 R5A 20040624 T013210153


0 23 ET-MC1 2HZ ON OFF ROJ 119 2163/1 R5A 20040624 T013210127 -----------------------------------------------------------------------------------------------------

================================================================SMN ProductNr Rev Name Date SerialNr================================================================ 0 ROJ 605 116/1 * Subrack DigSubrack 0 ROJ 605 116/1 R1A BACKPLANE 20040507 T091001162----------------------------------------------------------------

============================================================================================SMN APN BOARD SOFTWARE============================================================================================ 0 1 CBU1 1 CXC1725156_R71AE53 16:53:59 0 1 CBU1 2 CXC1725465_R71AE26 i2cpqii.ppc750 0 1 CBU1 3 CXC1725558_R71AE33 ethfcc.ppc 0 1 CBU1 4 CXC1725563_R71AE29 scc.ppc 0 1 CBU1 5 CXC1725310_R71AE42 board_ctrl.ppc 0 1 CBU1 6 CXC1725489_R71AE41 board_cntrl_mp.ppc 0 1 CBU1 7 CXC1725507_R71AE33 board_cntrl_gpb.ppc750 0 1 CBU1 8 CXC1725383_R71AE36 ics.ppc750..<cut>... 0 23 ET-MC1 2 CXC1725467_R71AE25 i2copb.ppc 0 23 ET-MC1 3 CXC1725310_R71AE37 board_ctr l .ppc 0 23 ET-MC1 4 CXC1725501_R71AE31 board_cntrl_dbm2.ppc405 0 23 ET-MC1 5 CXC1725509_R71AE22 spas_basic_spic_mp_bp_lm.ppc 0 23 ET-MC1 6 CXC1725385_R71AE33 ics .ppc405--------------------------------------------------------------------------------------------

=================================================================================================================SMN APN PORT BOARD OPER MAINT FAULT PRODUCT NR REV DATE SERIAL NR ================================================================================================================= 0 12 port_0_dev_7 RU21 steady 16hz off KRC 118 16/1 R2A 20050408 A400197139 0 12 port_0_dev_7 FU ON 16Hz OFF KRC 118 17/1 R2B 20050815 A400279170 0 12 port_4_dev_8 RU21 steady 16hz off KRC 118 16/1 R2A 20050524 A400228794 0 12 port_4_dev_8 FU ON 16Hz OFF KRC 118 17/1 R2A 20050418 A400205145 0 12 port_8_dev_9 RU21 steady 16hz off KRC 118 16/1 R2A 20050415 A400202883 0 12 port_8_dev_9 FU ON 16Hz OFF KRC 118 17/1 R2A 20050418 A400205132 -----------------------------------------------------------------------------------------------------------------


7.5.4 Example: ERBS

ERBS> cabsx

=====================================================================================================SMN APN BOARD OPER MAINT FAULT PRODUCT NR REV DATE SERIAL NR TEMP COREMGR===================================================================================================== 0 1 DUL ON OFF OFF KDU137533/3 R2B 20100223 C823389377 -----------------------------------------------------------------------------------------------------

================================================================SMN ProductNr Rev Name Date SerialNr================================================================ 0 ROJ 999 999 * BACKPLANE ----------------------------------------------------------------

===============================================================================================================SMN APN PORT BOARD OPER MAINT FAULT PRODUCT NR REV DATE SERIAL NR =============================================================================================================== 0 1 BXP_0_1 RUS steady off KRC11830/1 R1C 20100126 C823344442 0 1 BXP_1_1 RUS steady 16hz off KRC11830/1 R1C 20100218 C823380784 0 1 BXP_2_1 RUS steady 16hz off KRC11830/1 R1B 20091030 C823095816 0 1 BXP_3_1 RUS steady 16hz off KRC11830/1 R1B 20091126 C823218842 0 1 BXP_4_1 RUS steady 16hz off KRC11830/1 R1B 20091125 C823213279 0 1 BXP_5_1 RUS steady 16hz off KRC11830/1 R1B 20091109 C823129166 ---------------------------------------------------------------------------------------------------------------

============================================================================================SMN APN BOARD SOFTWARE============================================================================================ 0 1 DUL 1 CXC1725156_R71AS04 12:41:17 0 1 DUL 2 CXC1725563_R71AS02 scc.ppc 0 1 DUL 3 CXC1725558_R71AS03 ethfcc.ppc 0 1 DUL 4 CXC1725465_R71AS02 i2cpqii.ppc750 0 1 DUL 5 CXC1725310_R71AS07 board_ctrl.ppc 0 1 DUL 6 CXC1725507_R71AS03 board_cntrl_gpb.ppc750 0 1 DUL 7 CXC1725489_R71AS03 board_cntrl_mp.ppc 0 1 DUL 8 CXC1726232_R71AS02 ics_gpm2.ppc 0 1 DUL 9 CXC1320785_R71AS03 loaderserver.ppc 0 1 DUL 10 CXC1327705_R71AN06 dbagent.ppc


0 1 DUL 11 CXC1321314_R71AS03 sock.ppc 0 1 DUL 12 CXC1321316_R71AS02 ethernet.ppc 0 1 DUL 13 CXC1325792_R71AN09 licensemanager.ppc 0 1 DUL 14 CXC1321341_R71AN09 sw_installation.ppc 0 1 DUL 15 CXC1323464_R71AN09 objectsupport.ppc 0 1 DUL 16 CXC1320787_R71AN09 SystemManagerAgent.ppc 0 1 DUL 17 CXC1321315_R71AS03 inet.ppc 0 1 DUL 18 CXC1322506_R71AS03 iputil.ppc 0 1 DUL 19 CXC1320782_R71AS04 equipment_resource.ppc 0 1 DUL 20 CXC1320781_R71AN08 database.ppc 0 1 DUL 21 CXC1721176_R71AN08 pm_agent.ppc 0 1 DUL 22 CXC1322165%12_R71AN08 48Vpowersup.ppc 0 1 DUL 23 CXC1326054_R71AS03 target_monitor.ppc750 0 1 DUL 24 CXC1323911_R71AS05 ssh.ppc 0 1 DUL 25 CXC1320784_R71AN09 jvm.ppc 0 1 DUL 26 CXC1320783_R71AS03 http_server.ppc 0 1 DUL 27 CXC1327886_R71AN11 nsstum.ppc 0 1 DUL 28 CXC1321121_R71AN09 nsssyci_mpbp.ppc 0 1 DUL 29 CXC1327885_R71AN09 nsscbu.ppc 0 1 DUL 30 CXC1321344_R71AN07 pms.ppc 0 1 DUL 31 CXC1327943_R71AN12 ipadm_lm.ppc 0 1 DUL 32 CXC1327846_R71AS01 ipcp_adm_lm.ppc 0 1 DUL 33 CXC1325240%1_R71AS01 sctp_adm.ppc 0 1 DUL 34 CXC1325241%1_R71AS03 sctp_host.ppc 0 1 DUL 35 CXC1327928_R71AN11 iphost_gpb_lm.ppc 0 1 DUL 36 CXC1725398%7_R8B l teRbsBbomLm.ppc 0 1 DUL 37 CXC1323891%2_R9B03 lmbpp.bp403 0 1 DUL 38 CXC1329000%3_R1A01 lmatf_3 0 1 DUL 39 CXC1725422%1_R7C01 nci_rn_rbs.ppc 0 1 DUL 40 CXC1726088%7_R8B lteRbsMonitorLm 0 1 DUL 41 CXC1725190%7_R8B lteRbsCentralLm 0 1 DUL 42 CXC1725191%7_R8B lteRbsCellLm 0 1 DUL 43 CXC1725192%7_R8B lteRbsNcLm 0 1 DUL 44 CXC1729152%1_R2A36 crbsSupSysCtrlLm 0 1 DUL 45 CXC1720483_R71AS02 ncli.ppc--------------------------------------------------------------------------------------------

7.5.5 Other cab options

Memory usage:


RNC11> cabm

=================================================SMN APN BOARD FREE TOTAL================================================= 0 1 SCB 7,7 Mb (48%) 15,9 Mb 0 4 TUB 7,4 Mb (46%) 15,9 Mb 0 5 TUB 7,4 Mb (46%) 15,9 Mb 0 6 ET-M4 5,0 Mb (31%) 15,9 Mb 0 7 ET-M4 5,0 Mb (31%) 15,9 Mb 0 8 GPB3 286,8 Mb (56%) 511,8 Mb 0 9 GPB3 288,7 Mb (56%) 512,0 Mb 0 10 GPB3 105,5 Mb (20%) 511,6 Mb 0 11 GPB3 111,1 Mb (21%) 511,6 Mb 0 12 GPB3 41,0 Mb (8%) 511,6 Mb 0 13 GPB3 237,4 Mb (46%) 511,6 Mb 0 14 GPB3 57,7 Mb (11%) 511,6 Mb 0 15 GPB3 57,9 Mb (11%) 511,6 Mb 0 16 GPB3 57,7 Mb (11%) 511,6 Mb 0 17 GPB3 315,5 Mb (61%) 511,8 Mb 0 18 GPB3 319,5 Mb (62%) 511,8 Mb 0 19 SPB 5,5 Mb (34%) 15,9 Mb 0 20 SPB 5,5 Mb (34%) 15,9 Mb 0 22 SPB 5,5 Mb (34%) 15,9 Mb 0 23 SPB 5,5 Mb (34%) 15,9 Mb 0 26 ET-M4 4,9 Mb (30%) 15,9 Mb 0 27 ET-M4 5,0 Mb (31%) 15,9 Mb 0 0 SCB 7,7 Mb (48%) 15,9 Mb-------------------------------------------------

Disk usage

RNC11> cabd

================================================================Global Vol total used free frw device unit================================================================/c 851M 291M 34% 560M 66% FRW mirrordd 0 <600000-2344607>/p000800 851M 0M 0% 850M 100% FRW idedd 0 <600000-2344607>/p000900 851M 0M 0% 850M 100% FRW idedd 0 <600000-2344607>/p001200 851M 4M 0% 847M 100% FRW idedd 0 <600000-2344607>/p001300 851M 0M 0% 850M 100% FRW idedd 0 <600000-2344607>/p001400 851M 0M 0% 850M 100% FRW idedd 0 <600000-2344607>/p001500 851M 0M 0% 850M 100% FRW idedd 0 <600000-2344607>


/p001600 415M 0M 0% 415M 100% FRW idedd 0 <400000-1250927>/p001700 851M 0M 0% 850M 100% FRW idedd 0 <600000-2344607>/p001800 851M 0M 0% 850M 100% FRW idedd 0 <600000-2344607>----------------------------------------------------------------

================================================================Local volume total used free frw device unit================================================================0008 /d 292M 188M 64% 104M 35% FRW idedd 0 <4-599999>0009 /d 292M 188M 64% 104M 35% FRW idedd 0 <4-599999>0010 /d 292M 202M 69% 90M 31% FRW idedd 0 <4-599999>0011 /d 292M 202M 69% 90M 31% FRW idedd 0 <4-599999>0012 /d 292M 188M 64% 104M 35% FRW idedd 0 <4-599999>0013 /d 292M 188M 64% 104M 35% FRW idedd 0 <4-599999>0014 /d 292M 188M 64% 104M 35% FRW idedd 0 <4-599999>0015 /d 292M 188M 84% 104M 35% FRW idedd 0 <4-599999>0016 /d 195M 188M 96% 6M 3% FRW idedd 0 <4-399999>0017 /d 292M 188M 64% 104M 35% FRW idedd 0 <4-599999>0018 /d 292M 188M 64% 104M 35% FRW idedd 0 <4-599999>----------------------------------------------------------------0001 /f 1801K 42K 2% 1759K 98% FRW ftldd 0 <4-3605>0002 /f 1801K 42K 2% 1759K 98% FRW ftldd 0 <4-3605>0003 /f 1801K 42K 2% 1759K 98% FRW ftldd 0 <4-3605>0004 /f 1801K 105K 6% 1696K 94% FRW ftldd 0 <4-3605>0006 /f 1801K 848K 47% 953K 53% FRW ftldd 0 <4-3605>0007 /f 1801K 848K 47% 953K 53% FRW ftldd 0 <4-3605>0019 /f 9492K 5514K 58% 3978K 42% FRW ftldd 0 <4-18987>0020 /f 9492K 6671K 70% 2821K 30% FRW ftldd 0 <4-18987>0021 /f 9492K 4522K 48% 4970K 52% FRW ftldd 0 <4-18987>0022 /f 9492K 5514K 58% 3978K 42% FRW ftldd 0 <4-18987>0023 /f 9492K 6671K 70% 2821K 30% FRW ftldd 0 <4-18987>0026 /f 1801K 848K 47% 953K 53% FRW ftldd 0 <4-3605>0027 /f 1801K 543K 30% 1258K 70% FRW ftldd 0 <4-3605>0000 /f 1801K 42K 2% 1759K 98% FRW ftldd 0 <4-3605>----------------------------------------------------------------

CPU load

RNC11> cabl

============================================================================================SMN APN BOARD TOTLOAD SPPROCLOAD============================================================================================ 0 1 SCB3 1.8


0 4 TUB 0.5 0 5 TUB 0.5 0 6 ET-M4 1.2 0 7 ET-M4 0.9 0 8 GPB53 4.3 0 9 GPB53 0.5 0 10 GPB53 2.9 0 11 GPB53 2.6 0 12 GPB53 0.4 0 13 GPB53 0.0 0 14 GPB53 66.7 0 15 GPB53 0.0 0 16 GPB53 39.5 0 17 GPB53 2.6 0 18 NOCONTACT 0 19 SPB21 16.4 1.0 14.1 40.9 46.3 34.2 0 20 SPB21 13.7 1.1 13.5 38.5 43.1 43.1 0 22 SPB21 5.7 1.1 11.9 38.4 36.6 51.2 0 23 SPB21 10.8 0.9 11.6 30.6 40.0 41.1 0 26 ET-M4 3.0 0 27 ET-M4 5.6 0 0 SCB3 1.3 --------------------------------------------------------------------------------------------

8 COLI COMMANDS

8.1 OSE shell access

COLI commands can be typed from the moshell prompt, they are then sent transparently to the node via telnet or ssh communication. Whether telnet or ssh will be used is specified by the uservariable secure_shell (0=telnet, 1=ssh):

RNC11> uv secure_shell

secure_shell = 0

Opening a telnet/ssh session to the node gives access to the OSE shell of the central MP (GPB/CBU/DU)It is possible to access the OSE shell of another processor by using the link handler over ICP or ECP, by using the “lhsh” command.The following processor types can be accessed via OSE shell:

- MP and BP. The link handler ends with 00, e.g. 031700.


- SPM. Use the link handler of the controlling BP followed by the position of the SP. E.g. : 001900/sp1.lnh- XP. Use the link handler of the controlling BP followed by the port/dev value (as per the “ps port*” printout. E.g: 000100/port_0_dev_7- XP on ERBS: The address is called BXP_x_y, eg BXP_3_1- GCPU on ERBS: The address is called gcpu00xxxx , eg gcpu00256

Central MP (GPB/CBU/DU)

inet_lm (TCP/IP)

ssh_lm (telnet/ssh)

basic_os (OSE shell)

Ethernet MoShell

Other board


Other board


Other board


LinkHandler

LinkHandler

LinkHandler

ethernet_lm

8.2 I nter-processor communication

Processes running in different processors communicate with each other over ICP (internal control path, a point to point connection between two processors).When an ICP is not available or has not been setup yet (e.g. during restart phase), the meta-channel can be used.


ATM

AAL0 AAL5 AAL5

LH

ICP

ATM

AAL5 AAL5 AAL0

LH

ICP metachannel metachannel

Processor (MP or BP) Processor (MP or BP)

- The MPs form an MP Cluster (MPC): each MP has an ICP with every other MP. - Each BP has an ICP with every MP but not with the other BPs. - The device processors have only one ICP with the nearest BP. - The XP’s (auXiliary Processor) are controlled from a MP or BP, using RS485 cabling. The link to XP is called ECP (instead of ICP).


ICP

MPC

MP

MP

MP

BP

BP

BP

BP

SP SP SP SP SP

SPB

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSB

ICP

MP MP

MP MP

MP MP

BP

BP

BP

BP

BP

SP SP SP SP SP

SPB

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSP MSP

MSB

XP

DSP

ICP

ICP

ECP

ICP

FPGA ICP

ETB/TU

RAX/TX

FAN

SCB

ICP

ICP ICP

ICP

ICP ICP

BP BP

XP

ECP

RU RUIF

ICP

XP

ECP

RU

XP

ECP

RU/FAN

8.3 Print the list of processors and their link handler addresses

The list of processor addresses can be printed with the command “bp all”. Examples:

MGW1> bp all

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================


000000 SCB3 MGW_SCB all allp bp scx000100 SCB3 MGW_SCB all allp bp scx000200 GPB40 MGW_MS_GPB_02 aal2nccadm all allp coremp mp000300 GPB40 MGW_MS_GPB_03 aal2nccadm all allp coremp mp000400 TUB MGW_TUB all allp bp tu000500 TUB MGW_TUB all allp bp tu000600 GPB40 MGW_MS_GPB_06 aal2ap aal2cpsrc all allp mp ommp000700 GPB40 MGW_MS_GPB_07 aal2ap aal2cpsrc all allp mp ommp000800 GPB40 MGW_MS_GPB_08 all allp mp mtp2mp sccpmp sctpmp ss7mp000900 GPB40 MGW_MS_GPB_09 aal2cpsrc all allp mp mtp2mp sccpmp sctpmp ss7mp001000 GPB40 MGW_MS_GPB_10 aal2ncc all allp confmgr mp sctpmp ss7mp001100 GPB40 MGW_MS_GPB_11 aal2ncc all allp confmgr mp sctpmp ss7mp001200 GPB40 MGW_MS_GPB_12 aal2ap aal2cpsrc all allp mp mtp2mp sccpmp sctpmp ss7mp001300 GPB40 MGW_MS_GPB_13 aal2ap aal2cpsrc all allp mp mtp2mp sccpmp sctpmp ss7mp001700 SXB3 MGW_SXB_Main all allp bp scx001800 SXB3 MGW_SXB_Main all allp bp scx001900 SXB3 MGW_SXB_Main all allp bp scx002000 SXB3 MGW_SXB_Main all allp bp scx002400 GPB40 MGW_MS_GPB_24 aal2ncc all allp ch licdb mp ss7mp002500 GPB40 MGW_MS_GPB_25 aal2ncc all allp gra imra mesc mp raa ss7mp stc002600 GPB40 MGW_MS_GPB_26 all allp ch mp mtp2mp ss7mp002700 GPB40 MGW_MS_GPB_27 all allp ch licdb mp mtp2mp ss7mp stc010000 SCB3 MGW_SCB all allp bp scx010100 SCB3 MGW_SCB all allp bp scx010200 GPB40 MGW_ATMIP_GPB_02 aal2ncc all allp gra mp mtp2mp ss7mp010300 GPB40 MGW_ATMIP_GPB_03 aal2ncc all allp gra mp mtp2mp ss7mp010400 ET-M4 MGW_ET_M4 all allp bp et010500 ET-M4 MGW_ET_M4 all allp bp et010600 ET-M4 MGW_ET_M4 all allp bp et010700 ET-M4 MGW_ET_M4 all allp bp et010800 ET-M4 MGW_ET_M4 all allp bp et010900 ET-M4 MGW_ET_M4 all allp bp et011000 ET-M4 MGW_ET_M4 all allp bp et011100 ET-M4 MGW_ET_M4 all allp bp et011200 ET-M4 MGW_ET_M4 all allp bp et011300 ET-M4 MGW_ET_M4 all allp bp et011400 ET-M4 MGW_ET_M4 all allp bp et011500 ET-M4 MGW_ET_M4 all allp bp et011600 ET-M4 MGW_ET_M4 all allp bp et011700 ET-M4 MGW_ET_M4 all allp bp et011800 ET-M4 MGW_ET_M4 all allp bp et012100 ET-MC41 MGW_ET_MC41 all allp bp et012300 ET-MC41 MGW_ET_MC41 all allp bp et012500 ET-MC1 MGW_ET_MC1 all allp bp et012600 ET-MC1 MGW_ET_MC1 all allp bp et


012700 SXB3 MGW_SXB_Device all allp bp scx730000 SCB3 MGW_SCB all allp bp scx730100 SCB3 MGW_SCB all allp bp scx730200 GPB40 MGW_MSE_GPB_02 all allp gra imra mp mtp2mp ss7mp730300 GPB40 MGW_MSE_GPB_03 all allp gra imra mp mtp2mp ss7mp730400 GPB40 MGW_MSE_GPB_04 all allp gra mp mtp2mp ss7mp730500 GPB40 MGW_MSE_GPB_05 aal2ncc all allp mesc mp raa ss7mp730600 GPB40 MGW_MSE_GPB_06 aal2ncc all allp mesc mp raa ss7mp730700 MSB3 MGW_MSB3_Profile_16 all allp bp msb msb3730800 MSB3 MGW_MSB3_Profile_16 all allp bp msb msb3730900 MSB3 MGW_MSB3_Profile_13 all allp bp msb msb3731000 MSB3 MGW_MSB3_Profile_13 all allp bp msb msb3731100 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731200 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731300 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731400 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731500 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731600 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731700 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731800 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731900 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3732000 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3732100 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3732300 ET-MC41 MGW_ET_MC41 all allp bp et732500 ET-MC41 MGW_ET_MC41 all allp bp et732700 SXB3 MGW_SXB_Device all allp bp scx===============================================================================================Total: 71 boards

RNC11> bp all

===============================================================================================Board BoardType Mod SwAllocation/DevType BoardGroups===============================================================================================000000 SCB3 SCB all allp bp scx000100 SCB3 SCB all allp bp scx000400 TUB TUB all allp bp tu000500 TUB TUB all allp bp tu000600 ET-M4 ETM4 all allp bp et000700 ET-M4 ETM4 all allp bp et000800 GPB53 GPB_SCCP_ITU aal2ap all allp mp sccpmp sctpmp000900 GPB53 GPB_SCCP_ITU aal2ap all allp mp sccpmp sctpmp001000 GPB53 GPB_Central_E1_ITU aal2cpsrc aal2nccadm all allp coremp mp001100 GPB53 GPB_Central_E1_ITU aal2cpsrc aal2nccadm all allp coremp mp


001200 GPB53 GPB_OM all allp mp ommp001300 GPB53 GPB_OM all allp mp ommp001400 GPB53 1 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod1 modact modms mp001500 GPB53 - GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod modms modsb mp001600 GPB53 8 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod8 modact modms mp001700 GPB53 GPB_RANAP_RNSAP all allp mp ranapmp rnsapmp001800 NOCONTACT GPB_RANAP_RNSAP all allp bp ranapmp rnsapmp001900 SPB21 1 SPB_TYPE_A all allp bp spb spb1 spbms001900/sp0.lnh 1 **PDR all pdr pdr1 pdrms001900/sp1.lnh 1 **CC all cc cc1 ccms001900/sp2.lnh 1 **DC all dc dc1 dcms001900/sp3.lnh 1 **DC all dc dc1 dcms001900/sp4.lnh 1 **DC all dc dc1 dcms002000 SPB21 1 SPB_TYPE_A all allp bp spb spb1 spbms002000/sp0.lnh 1 **PDR all pdr pdr1 pdrms002000/sp1.lnh 1 **CC all cc cc1 ccms002000/sp2.lnh 1 **DC all dc dc1 dcms002000/sp3.lnh 1 **DC all dc dc1 dcms002000/sp4.lnh 1 **DC all dc dc1 dcms002200 SPB21 8 SPB_TYPE_A all allp bp spb spb8 spbms002200/sp0.lnh 8 **PDR all pdr pdr8 pdrms002200/sp1.lnh 8 **CC all cc cc8 ccms002200/sp2.lnh 8 **DC all dc dc8 dcms002200/sp3.lnh 8 **DC all dc dc8 dcms002200/sp4.lnh 8 **DC all dc dc8 dcms002300 SPB21 8 SPB_TYPE_A all allp bp spb spb8 spbms002300/sp0.lnh 8 **PDR all pdr pdr8 pdrms002300/sp1.lnh 8 **CC all cc cc8 ccms002300/sp2.lnh 8 **DC all dc dc8 dcms002300/sp3.lnh 8 **DC all dc dc8 dcms002300/sp4.lnh 8 **DC all dc dc8 dcms002600 ET-M4 ETM4 all allp bp et002700 ET-M4 ETM4 all allp bp et===============================================================================================Total: 23 boards, 20 devices

WRBS75> bp all

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================000100 CBU1 Main_CBU aal2ap aal2cpsrc aal2ncc aal2nccadm all allp coremp mp ommp sctpmp000200 ET-M4 RBS_ETM4 all allp bp et000400 RAX13 RBS_RAXB all allp bp rax000500 RAX RBS_RAXB all allp bp rax


000600 RAX RBS_RAXB all allp bp rax000700 RAX RBS_RAXB all allp bp rax001000 TX6HS-04 RBS_TXB all allp bp tx tx6001100 TX6HS-04 RBS_TXB all allp bp tx tx6001200 RUIF RBS_RUIFB all allp bp ruif001300 RUIF RBS_RUIFB all allp bp ruif001400 TX6HS-04 RBS_TXB all allp bp tx tx6001500 NOCONTACT RBS_TXB all allp bp001600 RAX13 RBS_RAXB all allp bp rax001700 RAX RBS_RAXB all allp bp rax001200/port_0_dev_13 ** all ru ru1 xp001200/port_4_dev_15 ** all ru ru2 xp001200/port_8_dev_17 ** all ru ru3 xp001300/port_0_dev_14 ** all ru ru4 xp001300/port_4_dev_16 ** all ru ru5 xp001300/port_8_dev_18 ** all ru ru6 xp===============================================================================================Total: 20 boards

ENB17> bp all

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================000100 DUL3 main admmp all allp coremp et etip mp ommp tugcpu00256 ** all gcpu gcpu1gcpu00512 ** all gcpu gcpu2gcpu00768 ** all gcpu gcpu3gcpu01024 ** all gcpu gcpu4BXP_0_1 ** all ru ru1 xpBXP_1_1 ** all ru ru2 xpBXP_2_1 ** all ru ru3 xpBXP_3_1 ** all ru ru4 xpBXP_4_1 ** all ru ru5 xpBXP_5_1 ** all ru ru6 xp===============================================================================================Total: 11 boards

8.4 Running COLI commands on single boards

By default, COLI commands are sent to the central MP. The position of the central MP can be printed with the “pdr” command.


RNC11> pdr

$ pdrICP State smn apn suua supa handle linkname resend reqs0x0182cb80 8 0 27 0 0x001b0000 359 00x0182ca60 8 0 26 0 0x001a0000 358 00x0182c940 8 0 0 0 0x00000000 357 00x0182c820 8 0 23 0 0x00170000 356 00x0182c700 8 0 22 0 0x00160000 355 00x0182c5e0 8 0 20 0 0x00140000 354 00x0182c4c0 8 0 19 0 0x00130000 353 00x0182c3a0 8 0 18 0 0x00120000 352 00x0182c280 8 0 17 0 0x00110000 351 00x0182c160 8 0 16 0 0x00100000 350 00x0182c040 8 0 7 0 0x00070000 349 00x0182bf20 8 0 15 0 0x000f0000 348 00x0182bd20 8 0 9 0 0x00090000 347 00x0182bc00 8 0 6 0 0x00060000 345 00x0182bae0 8 0 8 0 0x00080000 346 00x0182b980 8 0 14 0 0x000e0000 344 00x0182b820 8 0 5 0 0x00050000 360 00x0182b6a0 8 0 13 0 0x000d0000 342 00x0182b580 8 0 4 0 0x00040000 341 00x01824f60 8 0 1 0 0x00010000 340 00x0182b1e0 8 0 12 0 0x000c0000 339 00x018263a0 8 0 11 0 0x000b0000 338 00x01812320 2 0 10 0 0x000a0000 0 001000 0

To execute COLI commands on other processors, the lhsh command can be used.

Examples:

RNC11> lhsh 001400 te log read

$ lhsh 001400 te log read [2010-01-13 06:00:47.612] Sys_Spas_plane_proc asccconfiguration.c:1200 INFO:SPAS_AC: asccB port is configured.[2010-01-13 06:00:47.632] Sys_Spas_id_proc id.c:1744 INFO:SPAS resources found 1 SAI, 0 CORE, 4 ISL [2010-01-13 06:00:47.640] Sys_Spas_id_proc id.c:1858 INFO:Board type SXB3 revision R1B[2010-01-13 06:00:47.640] Sys_Spas_id_proc id.c:1949 INFO:SMN is [0][2010-01-13 06:00:48.188] Sys_Osa_Ntp_Manager_proc ntpstart.c:1177 INFO:NTP Mgr process ID =x10039


[2010-01-13 06:00:48.192] Sys_Osa_Ntp_Manager_proc ntpstart.c:2485 INFO:NTP not synchronized[2010-01-13 06:00:48.192] Cls_lcim_proc lcim.c:340 INFO:LCIM: No CIM Pid received from NS (GetServicePidRequest), retrying[2010-01-13 06:00:50.308] Sys_Osa_clkDistr_proc systemclock.c:1624 INFO:RTC panic set...[2010-01-19 05:56:27.532] Sys_Spas_sync_proc sync.c:800 INFO:Clock status : (A:ok B:ok Int:ok ) selected : Int[2010-01-19 05:56:27.536] Sys_Spas_sync_proc sync.c:800 INFO:Clock status : (A:ok B:ok Int:ok ) selected : Int[2010-01-19 05:56:27.540] Sys_Spas_sync_proc sync.c:800 INFO:Clock status : (A:ok B:ok Int:ok ) selected : Int[2010-01-19 05:56:27.544] Sys_Spas_sync_proc sync.c:800 INFO:Clock status : (A:ok B:ok Int:ok ) selected : Int[2010-01-19 05:56:27.548] Sys_Spas_sync_proc sync.c:800 INFO:Clock status : (A:ok B:ok Int:ok ) selected : Int.....<cut>....

RNC11> lhsh 001900/sp0.lnh splistloaded

$ lhsh 001900/sp0.lnh splistloadedLoaded modules

Load module id: CXC1327870_R51MD01 Load module path: @(#)/vobs/cello/ip_sa/ipac_src/IPA_CRX901054_1/IPHOST-SPB_CNX901606/IPHOST-SPB_CXC1327870 iphost_spb_lm.ppc750 ppc750 uaberpe_ipac_maint_cpp Load module version: @(#)CXC1327870 R51MD01 2007-07-30 08:51:50 MEST 868a914e-0e404706-1627 Program handle: 1 Entry point: 20039678 Start section 0: 20000068 Size: 00060fa8 Start section 1: 20070000 Size: 00000000 Start section 2: 20070000 Size: 00203570

Load module id: CXC1329865_R10CC01 Load module path: @(#)/vobs/rnc/rrt/binaries12/rncLm/rncLmPdr/standard RncLmPdr ppc elmcm002_lmbuildmd_wendy_pdr_standard_1.1 Load module version: @(#)CXC1329865 R10CC01 2008-02-21 22:58:28 MET 93d60a0d-0f50b084-311c Program handle: 2 Entry point: 202e3094 Start section 0: 202a0068 Size: 002941a8 Start section 1: 20540000 Size: 00000000 Start section 2: 20540000 Size: 008072e0 $

RNC11> lhsh 000100/port_0_dev_7 par get SYS_HW*

$ lhsh 000100/port_0_dev_7 par get SYS_HW*'SYS_HW_PID' = 'BKV 301 487/1''SYS_HW_REV' = 'R3A''SYS_HW_NAME' = 'FAN''SYS_HW_DATE' = '20060112'


'SYS_HW_SERIAL' = 'X76CE99945'

ERBS1> lhsh BXP_3_1 ?

$ lhsh BXP_3_1 ?Command Description default shell command. execute commands from file? print description of commandsai Access to the AI unit Interfaceau3vii Print LED status for all AU3 units or the selected one (au3==AU-type).bc Access to BCI test interfacebiosls List installed bios modulesbl list blocksccie ccie shell cmdcfheflist Get active fault list for c(b)ci or c(d)cicfhefmap Get fault mappingcfpga ....

ERBS1> lhsh gcpu00256 ?

$ lhsh gcpu00256 ? Command Description default shell command. execute commands from file? print description of commandsbiosls List installed bios modulesbl list blockscapi cls clear screen (using ANSI codes)connfss connect to remote fssdate print or set/adjust date & timedspdump Ignore dumping when dsp does not respond if turned on.dspstat Provides the dsp statusdumph dump heap info or list all heapsecho echo arguments (-n no newline)errno print description of errno number....


Piping the output

RNC11> lhsh 001200 te log read | grep ERROR

[2006-09-06 15:45:00.928] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_PREDEF.PRIMARY.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [PREDEF.PRIMARY.STATS]. Proceeding with execution.[2006-09-06 15:45:00.940] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.utrancell.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.utrancell.STATS]. Proceeding with execution.[2006-09-06 15:45:00.944] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.rncfunction.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.rncfunction.STATS]. Proceeding with execution.[2006-09-06 15:45:00.948] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.CchFrameSynch.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.CchFrameSynch.STATS]. Proceeding with execution.[2006-09-06 15:45:00.952] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.DchFrameSynch.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.DchFrameSynch.STATS]. Proceeding with execution.[2006-09-06 15:45:00.956] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.IurLink.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.IurLink.STATS]. Proceeding with execution.[2006-09-06 15:45:00.980] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.LoadControl.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.LoadControl.STATS]. Proceeding with execution.[2006-09-06 15:45:00.984] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.UeRc.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.UeRc.STATS]. Proceeding with execution.[2006-09-06 15:45:00.988] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.Gsmrelation.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.Gsmrelation.STATS]. Proceeding with execution.[2006-09-06 15:45:00.992] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.UtranRelation.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.UtranRelation.STATS]. Proceeding with execution.[2006-09-06 15:45:00.996] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.Paging.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.Paging.STATS]. Proceeding with execution.[2006-09-06 15:45:01.000] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.LArea.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.LArea.STATS]. Proceeding with execution.[2006-09-06 15:45:01.004] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_USERDEF.RArea.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [USERDEF.RArea.STATS]. Proceeding with execution.[2006-09-06 15:45:01.008] se.ericsson.wcdma.rnc.roam.roam_pmstat:Pms_PREDEF.SECONDARY.STATS PmStatInternalScanner$MoInstancesInfo:0 INFO:ERROR: Scanner not in finishedScanner list [PREDEF.SECONDARY.STATS]. Proceeding with execution.

RNC11> ls -l | sort -nk 3

$ $ ls -l-rw-rw-rw- 0 3081 10 Jul 2006 12:44:43 Trace_01.prop-rw-rw-rw- 0 11487 22 Dec 2005 08:08:55 CXC1321344_R50GN03 (pms.ppc750)-rw-rw-rw- 0 18689 22 Dec 2005 08:08:22 CXC1320992_R50HF01 (aal2_adm.ppc)-rw-rw-rw- 0 20072 11 Jan 2006 12:40:09 CXC1322165%12_R50HX01 (48vpowsup)-rw-rw-rw- 0 20082 22 Dec 2005 08:10:16 CXC1322165%12_R50HC03 (48vpowsup)


-rw-rw-rw- 0 21217 11 Jan 2006 12:40:39 CXC1321407_R50HX01 (spas_link.pp)-rw-rw-rw- 0 21225 22 Dec 2005 08:09:01 CXC1321407_R50HC03 (spas_link.pp).....< cut > ........-rw-rw-rw- 0 1564295 22 Dec 2005 08:20:40 CXC1329863%2_R4G04 (RncLmDc)-rw-rw-rw- 0 1564300 22 Dec 2005 08:20:57 CXC1329863%3_R4G04 (RncLmDc)-rw-rw-rw- 0 1564639 11 Jan 2006 12:43:30 CXC1329863_R4J06 (RncLmDc)-rw-rw-rw- 0 1564645 11 Jan 2006 12:43:39 CXC1329863%2_R4J06 (RncLmDc)-rw-rw-rw- 0 1564667 19 Jan 2006 07:11:45 CXC1329863_R4J11 (RncLmDc)-rw-rw-rw- 0 1564680 19 Jan 2006 07:11:55 CXC1329863%2_R4J11 (RncLmDc)-rw-rw-rw- 0 1564692 19 Jan 2006 07:12:04 CXC1329863%3_R4J11 (RncLmDc)-rw-rw-rw- 0 1564703 11 Jan 2006 12:43:48 CXC1329863%3_R4J06 (RncLmDc)-rw-rw-rw- 0 1682531 11 Jan 2006 12:40:01 CXC1321447_R50HX06 (GpbBasic)-rw-rw-rw- 0 1682571 22 Dec 2005 08:09:26 CXC1321447_R50HX04 (GpbBasic)-rw-rw-rw- 0 3048154 22 Dec 2005 08:17:50 CXC1329856_R4G06 (RncLmCell)-rw-rw-rw- 0 3049921 11 Jan 2006 12:42:10 CXC1329856_R4J08 (RncLmCell)-rw-rw-rw- 0 3049923 19 Jan 2006 07:10:30 CXC1329856_R4J10 (RncLmCell)-rw-rw-rw- 0 3396654 22 Dec 2005 08:19:57 CXC1329860_R4G02 (RncLmFro)-rw-rw-rw- 0 3416818 11 Jan 2006 12:43:18 CXC1329860_R4J09 (RncLmFro)-rw-rw-rw- 0 3417860 19 Jan 2006 07:11:35 CXC1329860_R4J10 (RncLmFro)-rw-rw-rw- 0 6846040 22 Dec 2005 08:19:06 CXC1329857_R4G06 (RncLmUe)-rw-rw-rw- 0 6848725 11 Jan 2006 12:42:54 CXC1329857_R4J08 (RncLmUe)-rw-rw-rw- 0 6849049 19 Jan 2006 07:11:14 CXC1329857_R4J14 (RncLmUe)

Running several commands on the same board

RNC11> vii ; pwd ; cd /d/loadmodules ; pwd ; llog

$ vii----- VII SERVER INFO ----- registered cl ients : client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN ---------- ----- ---------- -------- -------- ---------------- ------------ ---------- --------

LED StateGREEN CLS_LEDI_ONRED CLS_LEDI_OFFYELLOW CLS_LEDI_OFF$ pwd/d/$ cd /d/loadmodules$ pwd/d/loadmodules/$ llog--------------------------------------------------------------------------------


1. [11-04-05 01:32:12] 0xB0AD0000 (2) Board manager restart.. Restart o-------------------------------------------------------------------------------- 2. [11-04-07 04:04:07] 0xB0AD0000 (2) Board manager restart.. Restart o-------------------------------------------------------------------------------- 3. [11-04-11 01:15:50] 0xB0AD0000 (2) Board manager restart.. Restart o-------------------------------------------------------------------------------- 4. [11-04-12 01:13:11] 0xB0AD0000 (2) Board manager restart.. Restart o-------------------------------------------------------------------------------- 5. [11-04-29 15:36:56] 0xB0AD0002 (2) Board manager restart.. Restart o-------------------------------------------------------------------------------- 6. [11-04-29 19:46:57] 0xB0AD0000 (2) Board manager restart.. Kill of p-------------------------------------------------------------------------------- 7. [11-05-16 01:03:58] 0xB0AD0000 (2) Board manager restart.. Restart o-------------------------------------------------------------------------------- 8. [11-05-19 20:23:38] 0xB0AD0002 (2) Board manager restart.. Restart o$

RNC11> lhsh 001100 ; vii ; cd /d/loadmodules ; pwd

$ lhsh 001100Welcome to OSE Shell ose5.3.001100> vii----- VII SERVER INFO ----- registered cl ients : client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN ---------- ----- ---------- -------- -------- ---------------- ------------ ---------- --------

LED StateGREEN CLS_LEDI_ONRED CLS_LEDI_OFFYELLOW CLS_LEDI_OFF001100> cd /d/loadmodules001100> pwd/d/loadmodules/001100> exit$

8.5 Running COLI commands on multiple boards, using board groups


8.5.1 Example: MGW

MGW1> bp

====================================================Board-Group Nr of Boards====================================================aal2ap 4aal2cpsrc 5aal2ncc 8aal2nccadm 2all 71allp 71bp 50ch 3confmgr 2coremp 2et 21gra 6imra 3licdb 2mesc 3mp 21msb 15msb3 15mtp2mp 11ommp 2raa 3sccpmp 4sctpmp 6scx 12ss7mp 17stc 2tu 2====================================================Total: 27 groups

MGW1> bp all

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================000000 SCB3 MGW_SCB all allp bp scx000100 SCB3 MGW_SCB all allp bp scx


000200 GPB40 MGW_MS_GPB_02 aal2nccadm all allp coremp mp000300 GPB40 MGW_MS_GPB_03 aal2nccadm all allp coremp mp000400 TUB MGW_TUB all allp bp tu000500 TUB MGW_TUB all allp bp tu000600 GPB40 MGW_MS_GPB_06 aal2ap aal2cpsrc all allp mp ommp000700 GPB40 MGW_MS_GPB_07 aal2ap aal2cpsrc all allp mp ommp000800 GPB40 MGW_MS_GPB_08 all allp mp mtp2mp sccpmp sctpmp ss7mp000900 GPB40 MGW_MS_GPB_09 aal2cpsrc all allp mp mtp2mp sccpmp sctpmp ss7mp001000 GPB40 MGW_MS_GPB_10 aal2ncc all allp confmgr mp sctpmp ss7mp001100 GPB40 MGW_MS_GPB_11 aal2ncc all allp confmgr mp sctpmp ss7mp001200 GPB40 MGW_MS_GPB_12 aal2ap aal2cpsrc all allp mp mtp2mp sccpmp sctpmp ss7mp001300 GPB40 MGW_MS_GPB_13 aal2ap aal2cpsrc all allp mp mtp2mp sccpmp sctpmp ss7mp001700 SXB3 MGW_SXB_Main all allp bp scx001800 SXB3 MGW_SXB_Main all allp bp scx001900 SXB3 MGW_SXB_Main all allp bp scx002000 SXB3 MGW_SXB_Main all allp bp scx002400 GPB40 MGW_MS_GPB_24 aal2ncc all allp ch licdb mp ss7mp002500 GPB40 MGW_MS_GPB_25 aal2ncc all allp gra imra mesc mp raa ss7mp stc002600 GPB40 MGW_MS_GPB_26 all allp ch mp mtp2mp ss7mp002700 GPB40 MGW_MS_GPB_27 all allp ch licdb mp mtp2mp ss7mp stc010000 SCB3 MGW_SCB all allp bp scx010100 SCB3 MGW_SCB all allp bp scx010200 GPB40 MGW_ATMIP_GPB_02 aal2ncc all allp gra mp mtp2mp ss7mp010300 GPB40 MGW_ATMIP_GPB_03 aal2ncc all allp gra mp mtp2mp ss7mp010400 ET-M4 MGW_ET_M4 all allp bp et010500 ET-M4 MGW_ET_M4 all allp bp et010600 ET-M4 MGW_ET_M4 all allp bp et010700 ET-M4 MGW_ET_M4 all allp bp et010800 ET-M4 MGW_ET_M4 all allp bp et010900 ET-M4 MGW_ET_M4 all allp bp et011000 ET-M4 MGW_ET_M4 all allp bp et011100 ET-M4 MGW_ET_M4 all allp bp et011200 ET-M4 MGW_ET_M4 all allp bp et011300 ET-M4 MGW_ET_M4 all allp bp et011400 ET-M4 MGW_ET_M4 all allp bp et011500 ET-M4 MGW_ET_M4 all allp bp et011600 ET-M4 MGW_ET_M4 all allp bp et011700 ET-M4 MGW_ET_M4 all allp bp et011800 ET-M4 MGW_ET_M4 all allp bp et012100 ET-MC41 MGW_ET_MC41 all allp bp et012300 ET-MC41 MGW_ET_MC41 all allp bp et012500 ET-MC1 MGW_ET_MC1 all allp bp et012600 ET-MC1 MGW_ET_MC1 all allp bp et012700 SXB3 MGW_SXB_Device all allp bp scx730000 SCB3 MGW_SCB all allp bp scx


730100 SCB3 MGW_SCB all allp bp scx730200 GPB40 MGW_MSE_GPB_02 all allp gra imra mp mtp2mp ss7mp730300 GPB40 MGW_MSE_GPB_03 all allp gra imra mp mtp2mp ss7mp730400 GPB40 MGW_MSE_GPB_04 all allp gra mp mtp2mp ss7mp730500 GPB40 MGW_MSE_GPB_05 aal2ncc all allp mesc mp raa ss7mp730600 GPB40 MGW_MSE_GPB_06 aal2ncc all allp mesc mp raa ss7mp730700 MSB3 MGW_MSB3_Profile_16 all allp bp msb msb3730800 MSB3 MGW_MSB3_Profile_16 all allp bp msb msb3730900 MSB3 MGW_MSB3_Profile_13 all allp bp msb msb3731000 MSB3 MGW_MSB3_Profile_13 all allp bp msb msb3731100 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731200 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731300 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731400 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731500 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731600 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731700 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731800 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3731900 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3732000 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3732100 MSB3 MGW_MSB3_Profile_3 all allp bp msb msb3732300 ET-MC41 MGW_ET_MC41 all allp bp et732500 ET-MC41 MGW_ET_MC41 all allp bp et732700 SXB3 MGW_SXB_Device all allp bp scx===============================================================================================Total: 71 boards

MGW1> bp gra

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================002500 GPB40 MGW_MS_GPB_25 aal2ncc all allp gra imra mesc mp raa ss7mp stc010200 GPB40 MGW_ATMIP_GPB_02 aal2ncc all allp gra mp mtp2mp ss7mp010300 GPB40 MGW_ATMIP_GPB_03 aal2ncc all allp gra mp mtp2mp ss7mp730200 GPB40 MGW_MSE_GPB_02 all allp gra imra mp mtp2mp ss7mp730300 GPB40 MGW_MSE_GPB_03 all allp gra imra mp mtp2mp ss7mp730400 GPB40 MGW_MSE_GPB_04 all allp gra mp mtp2mp ss7mp===============================================================================================Total: 6 boards

MGW1> bp mesc

===============================================================================================Board BoardType SwAllocation BoardGroups


===============================================================================================002500 GPB40 MGW_MS_GPB_25 aal2ncc all allp gra imra mesc mp raa ss7mp stc730500 GPB40 MGW_MSE_GPB_05 aal2ncc all allp mesc mp raa ss7mp730600 GPB40 MGW_MSE_GPB_06 aal2ncc all allp mesc mp raa ss7mp===============================================================================================Total: 3 boards

MGW1> bp raa

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================002500 GPB40 MGW_MS_GPB_25 aal2ncc all allp gra imra mesc mp raa ss7mp stc730500 GPB40 MGW_MSE_GPB_05 aal2ncc all allp mesc mp raa ss7mp730600 GPB40 MGW_MSE_GPB_06 aal2ncc all allp mesc mp raa ss7mp===============================================================================================Total: 3 boards

MGW1> bp licdb

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================002400 GPB40 MGW_MS_GPB_24 aal2ncc all allp ch licdb mp ss7mp002700 GPB40 MGW_MS_GPB_27 all allp ch licdb mp mtp2mp ss7mp stc===============================================================================================Total: 2 boards

MGW1> bp confmgr

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================001000 GPB40 MGW_MS_GPB_10 aal2ncc all allp confmgr mp sctpmp ss7mp001100 GPB40 MGW_MS_GPB_11 aal2ncc all allp confmgr mp sctpmp ss7mp===============================================================================================Total: 2 boards

MGW1> lh all te log read 3600 | grep ERROR

0004: [2006-06-07 16:26:42.052] Nss_tuControl_proc nss_tu_control_smAny.c:1137 ERROR:Unexpected signal 639489 received from Nss_tuDlRegu_proc0004: [2006-06-07 16:26:42.052] Nss_tuControl_proc nss_tu_control.c:290 CHECK:ERROR STATUS0004: [2006-06-07 16:26:42.052] Nss_tuControl_proc nss_tu_control.c:294 ERROR:Unexpected error occured, further investigation needed.0004: [2006-06-08 10:22:02.316] Nss_tuControl_proc nss_tu_control_smAny.c:1137 ERROR:Unexpected signal 639489 received from Nss_tuDlRegu_proc


etc..0016: [2006-07-08 22:48:15.996] uehUeCtxtC[1754] ../src/UehUeCtxtC.cpp:23484 ERROR:Timeout on Procedure Execution Timer for procedure : PROC 10: Soft Handover0016: [2006-07-08 22:48:15.996] UehSoftHoC[109] ../src/target/Cello/RTActor/badMessage.cc:196 ERROR:uehProcedures(109)@waitCellParams received unexpected message: uehUeCtxtAsynchIndicP%asynch_unknownSigInd data: void 0016: [2006-07-08 22:48:16.040] uehUeCtxtC[1755] ../src/UehUeCtxtC.cpp:23484 ERROR:Timeout on Procedure Execution Timer for procedure : PROC 10: Soft Handover0016: [2006-07-08 22:48:16.040] UehSoftHoC[110] ../src/target/Cello/RTActor/badMessage.cc:196 ERROR:uehProcedures(110)@waitCellParams received unexpected message: uehUeCtxtAsynchIndicP%asynch_unknownSigInd data: void 0016: [2006-07-08 22:48:16.360] uehUeCtxtC[1759] ../src/UehUeCtxtC.cpp:23484 ERROR:Timeout on Procedure Execution Timer for procedure : PROC 10: Soft Handover0016: [2006-07-08 22:48:16.360] UehSoftHoC[107] ../src/target/Cello/RTActor/badMessage.cc:196 ERROR:uehProcedures(107)@waitCellParams received unexpected message: uehUeCtxtAsynchIndicP%asynch_unknownSigInd data: void 0019: [2006-07-07 20:26:36.316] spp_superviser_ro sp_superviser_ro.cc:418 ERROR:Unknown signal 0x0 received from pid 0x101020019: [2006-07-08 22:46:27.508] spp_superviser_ro sp_superviser_ro.cc:418 ERROR:Unknown signal 0x2000e received from pid 0x10103

MGW1> lh mesc mesc_info_fpif -stat | grep 'in use'

0025: Number of Ctxs in use: 00025: Number of Ctxs not in use: 57007305: Number of Ctxs in use: 07305: Number of Ctxs not in use: 57007306: Number of Ctxs in use: 07306: Number of Ctxs not in use: 5700

MGW1> lh mesc mesc_counters -all

=============================================================================================$ lhsh 002500 mesc_counters -all0025: mesc_counters: Time=Wed Mar 25 14:02:05 20090025: mesc_counters: Command not accessable because Mesc is in Passive state:=============================================================================================$ lhsh 730500 mesc_counters -all7305: mesc_counters: Time=Wed Mar 25 14:02:05 20097305: mesc_counters output:7305: mesc_counters: Mesc specific data for mescId 1:7305: mesc_counters: --------------------------------------------------7305: mesc_counters: mescId = 17305: mesc_counters: rpuId = 737305: mesc_counters: Emergency reject counter = 07305: mesc_counters: Emergency request counter = 07305: mesc_counters: NrOfChangedCdvtSpeechToDataValue counter = 07305: mesc_counters: NrOfChangedCdvtDataToSpeechValue counter = 0...<cut>...


Note: refer to the command file of the dcg command (moshell/commonjars/scripts/dcg_datacollection.mos) for more examples of lh commands.

8.5.2 Example: RNC

RNC11> bp

====================================================Board-Group Nr of Boards====================================================aal2ap 5aal2cpsrc 5aal2ncc 3aal2nccadm 2aal2rh 3all 43allp 23bp 13cc 4cc1 2cc8 2ccms 4coremp 2dc 12dc1 6dc8 6dcms 12et 4mod 3mod1 1mod8 1modact 2modms 3modsb 1mp 10ommp 2pdr 4pdr1 2pdr8 2pdrms 4ranapmp 2


rnsapmp 2sccpmp 2sctpmp 2scx 2spb 4spb1 2spb8 2spbms 4tu 2====================================================Total: 40 groups

RNC11> bp all

===============================================================================================Board BoardType Mod SwAllocation/DevType BoardGroups===============================================================================================000000 SCB3 SCB all allp bp scx000100 SCB3 SCB all allp bp scx000400 TUB TUB all allp bp tu000500 TUB TUB all allp bp tu000600 ET-M4 ETM4 all allp bp et000700 ET-M4 ETM4 all allp bp et000800 GPB53 GPB_SCCP_ITU aal2ap all allp mp sccpmp sctpmp000900 GPB53 GPB_SCCP_ITU aal2ap all allp mp sccpmp sctpmp001000 GPB53 GPB_Central_E1_ITU aal2cpsrc aal2nccadm all allp coremp mp001100 GPB53 GPB_Central_E1_ITU aal2cpsrc aal2nccadm all allp coremp mp001200 GPB53 GPB_OM all allp mp ommp001300 GPB53 GPB_OM all allp mp ommp001400 GPB53 1 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod1 modact modms mp001500 GPB53 - GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod modms modsb mp001600 GPB53 8 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod8 modact modms mp001700 GPB53 GPB_RANAP_RNSAP all allp mp ranapmp rnsapmp001800 NOCONTACT GPB_RANAP_RNSAP all allp bp ranapmp rnsapmp001900 SPB21 1 SPB_TYPE_A all allp bp spb spb1 spbms001900/sp0.lnh 1 **PDR all pdr pdr1 pdrms001900/sp1.lnh 1 **CC all cc cc1 ccms001900/sp2.lnh 1 **DC all dc dc1 dcms001900/sp3.lnh 1 **DC all dc dc1 dcms001900/sp4.lnh 1 **DC all dc dc1 dcms002000 SPB21 1 SPB_TYPE_A all allp bp spb spb1 spbms002000/sp0.lnh 1 **PDR all pdr pdr1 pdrms002000/sp1.lnh 1 **CC all cc cc1 ccms002000/sp2.lnh 1 **DC all dc dc1 dcms002000/sp3.lnh 1 **DC all dc dc1 dcms


002000/sp4.lnh 1 **DC all dc dc1 dcms002200 SPB21 8 SPB_TYPE_A all allp bp spb spb8 spbms002200/sp0.lnh 8 **PDR all pdr pdr8 pdrms002200/sp1.lnh 8 **CC all cc cc8 ccms002200/sp2.lnh 8 **DC all dc dc8 dcms002200/sp3.lnh 8 **DC all dc dc8 dcms002200/sp4.lnh 8 **DC all dc dc8 dcms002300 SPB21 8 SPB_TYPE_A all allp bp spb spb8 spbms002300/sp0.lnh 8 **PDR all pdr pdr8 pdrms002300/sp1.lnh 8 **CC all cc cc8 ccms002300/sp2.lnh 8 **DC all dc dc8 dcms002300/sp3.lnh 8 **DC all dc dc8 dcms002300/sp4.lnh 8 **DC all dc dc8 dcms002600 ET-M4 ETM4 all allp bp et002700 ET-M4 ETM4 all allp bp et===============================================================================================Total: 23 boards, 20 devices

RNC11> bp mod

===============================================================================================Board BoardType Mod SwAllocation/DevType BoardGroups===============================================================================================001400 GPB53 1 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod1 modact modms mp001500 GPB53 - GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod modms modsb mp001600 GPB53 8 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod8 modact modms mp===============================================================================================Total: 3 boards

RNC11> bp allp

===============================================================================================Board BoardType Mod SwAllocation/DevType BoardGroups===============================================================================================000000 SCB3 SCB all allp bp scx000100 SCB3 SCB all allp bp scx000400 TUB TUB all allp bp tu000500 TUB TUB all allp bp tu000600 ET-M4 ETM4 all allp bp et000700 ET-M4 ETM4 all allp bp et000800 GPB53 GPB_SCCP_ITU aal2ap all allp mp sccpmp sctpmp000900 GPB53 GPB_SCCP_ITU aal2ap all allp mp sccpmp sctpmp001000 GPB53 GPB_Central_E1_ITU aal2cpsrc aal2nccadm all allp coremp mp001100 GPB53 GPB_Central_E1_ITU aal2cpsrc aal2nccadm all allp coremp mp001200 GPB53 GPB_OM all allp mp ommp


001300 GPB53 GPB_OM all allp mp ommp001400 GPB53 1 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod1 modact modms mp001500 GPB53 - GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod modms modsb mp001600 GPB53 8 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod8 modact modms mp001700 GPB53 GPB_RANAP_RNSAP all allp mp ranapmp rnsapmp001800 NOCONTACT GPB_RANAP_RNSAP all allp bp ranapmp rnsapmp001900 SPB21 1 SPB_TYPE_A all allp bp spb spb1 spbms002000 SPB21 1 SPB_TYPE_A all allp bp spb spb1 spbms002200 SPB21 8 SPB_TYPE_A all allp bp spb spb8 spbms002300 SPB21 8 SPB_TYPE_A all allp bp spb spb8 spbms002600 ET-M4 ETM4 all allp bp et002700 ET-M4 ETM4 all allp bp et===============================================================================================Total: 23 boards

RNC11> bp mod1

===============================================================================================Board BoardType Mod SwAllocation/DevType BoardGroups===============================================================================================001400 GPB53 1 GPB_Module aal2ap aal2cpsrc aal2ncc aal2rh all allp mod mod1 modact modms mp===============================================================================================Total: 1 boards

RNC11> bp cc1

===============================================================================================Board BoardType Mod SwAllocation/DevType BoardGroups===============================================================================================001900/sp1.lnh 1 **CC all cc cc1 ccms002000/sp1.lnh 1 **CC all cc cc1 ccms===============================================================================================Total: 0 boards, 2 devices

RNC11> lh all te log read | grep ERROR

0004: [2006-06-07 16:26:42.052] Nss_tuControl_proc nss_tu_control_smAny.c:1137 ERROR:Unexpected signal 639489 received from Nss_tuDlRegu_proc0004: [2006-06-07 16:26:42.052] Nss_tuControl_proc nss_tu_control.c:290 CHECK:ERROR STATUS0004: [2006-06-07 16:26:42.052] Nss_tuControl_proc nss_tu_control.c:294 ERROR:Unexpected error occured, further investigation needed.0004: [2006-06-08 10:22:02.316] Nss_tuControl_proc nss_tu_control_smAny.c:1137 ERROR:Unexpected signal 639489 received from Nss_tuDlRegu_procetc..0016: [2006-07-08 22:48:15.996] uehUeCtxtC[1754] ../src/UehUeCtxtC.cpp:23484 ERROR:Timeout on Procedure Execution Timer for procedure : PROC 10: Soft Handover


0016: [2006-07-08 22:48:15.996] UehSoftHoC[109] ../src/target/Cello/RTActor/badMessage.cc:196 ERROR:uehProcedures(109)@waitCellParams received unexpected message: uehUeCtxtAsynchIndicP%asynch_unknownSigInd data: void 0016: [2006-07-08 22:48:16.040] uehUeCtxtC[1755] ../src/UehUeCtxtC.cpp:23484 ERROR:Timeout on Procedure Execution Timer for procedure : PROC 10: Soft Handover0016: [2006-07-08 22:48:16.040] UehSoftHoC[110] ../src/target/Cello/RTActor/badMessage.cc:196 ERROR:uehProcedures(110)@waitCellParams received unexpected message: uehUeCtxtAsynchIndicP%asynch_unknownSigInd data: void 0016: [2006-07-08 22:48:16.360] uehUeCtxtC[1759] ../src/UehUeCtxtC.cpp:23484 ERROR:Timeout on Procedure Execution Timer for procedure : PROC 10: Soft Handover0016: [2006-07-08 22:48:16.360] UehSoftHoC[107] ../src/target/Cello/RTActor/badMessage.cc:196 ERROR:uehProcedures(107)@waitCellParams received unexpected message: uehUeCtxtAsynchIndicP%asynch_unknownSigInd data: void 0019: [2006-07-07 20:26:36.316] spp_superviser_ro sp_superviser_ro.cc:418 ERROR:Unknown signal 0x0 received from pid 0x101020019: [2006-07-08 22:46:27.508] spp_superviser_ro sp_superviser_ro.cc:418 ERROR:Unknown signal 0x2000e received from pid 0x101030020SP2: [2006-07-10 10:50:30.349] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1, instanceId -1 ] Previous state WaitCfnFromNew, Downlink traffic is sent to iub before is it ready...free the buffer0020SP2: [2006-07-10 10:50:30.369] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1, instanceId -1 ] Previous state WaitCfnFromNew, Downlink traffic is sent to iub before is it ready...free the buffer0020SP2: [2006-07-10 10:50:30.389] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1, instanceId -1 ] Previous state WaitCfnFromNew, Downlink traffic is sent to iub before is it ready...free the buffer0020SP2: [2006-07-10 10:50:30.409] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1, instanceId -1 ] Previous state WaitCfnFromNew, Downlink traffic is sent to iub before is it ready...free the buffer0020SP2: [2006-07-10 10:50:30.449] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1, instanceId -1 ] Previous state WaitCfnFromNew, Downlink traffic is sent to iub before is it ready...free the buffer0020SP2: [2006-07-10 10:50:30.469] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1, instanceId -1 ] Previous state WaitCfnFromNew, Downlink traffic is sent to iub before is it ready...free the buffer0020SP2: [2006-07-10 10:50:30.489] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1, instanceId -1 ] Previous state WaitCfnFromNew, Downlink traffic is sent to iub before is it ready...free the buffer0020SP2: [2006-07-10 10:50:30.509] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1, instanceId -1 ] Previous state WaitCfnFromNew, Downlink traffic is sent to iub before is it ready...free the buffer0020SP2: [2006-07-10 10:50:30.529] dcsIubDfpDlC[130] ../src/DcsIubDfpDlC.cpp:1819 ERROR:[ueRef 23, modId 0, rbId/rabType -1,

8.5.3 Example: WRBS

wrbs075> bp

====================================================Board-Group Nr of Boards====================================================aal2ap 1aal2cpsrc 1aal2ncc 1aal2nccadm 1all 20


allp 14bp 13coremp 1et 1mp 1ommp 1rax 6ru 6ru1 1ru2 1ru3 1ru4 1ru5 1ru6 1ruif 2sctpmp 1tx 3tx6 3xp 6====================================================Total: 25 groups

wrbs075> bp all

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================000100 CBU1 Main_CBU aal2ap aal2cpsrc aal2ncc aal2nccadm all allp coremp mp ommp sctpmp000200 ET-M4 RBS_ETM4 all allp bp et000400 RAX13 RBS_RAXB all allp bp rax000500 RAX RBS_RAXB all allp bp rax000600 RAX RBS_RAXB all allp bp rax000700 RAX RBS_RAXB all allp bp rax001000 TX6HS-04 RBS_TXB all allp bp tx tx6001100 TX6HS-04 RBS_TXB all allp bp tx tx6001200 RUIF RBS_RUIFB all allp bp ruif001300 RUIF RBS_RUIFB all allp bp ruif001400 TX6HS-04 RBS_TXB all allp bp tx tx6001500 NOCONTACT RBS_TXB all allp bp001600 RAX13 RBS_RAXB all allp bp rax001700 RAX RBS_RAXB all allp bp rax001200/port_0_dev_13 ** all ru ru1 xp001200/port_4_dev_15 ** all ru ru2 xp001200/port_8_dev_17 ** all ru ru3 xp001300/port_0_dev_14 ** all ru ru4 xp


001300/port_4_dev_16 ** all ru ru5 xp001300/port_8_dev_18 ** all ru ru6 xp===============================================================================================Total: 20 boards

wrbs075> bp rax

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================000400 RAX13 RBS_RAXB all allp bp rax000500 RAX RBS_RAXB all allp bp rax000600 RAX RBS_RAXB all allp bp rax000700 RAX RBS_RAXB all allp bp rax001600 RAX13 RBS_RAXB all allp bp rax001700 RAX RBS_RAXB all allp bp rax===============================================================================================Total: 6 boards

wrbs075> lh rax vii

put /home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20090602-083003_30095/lhCmd30129 /d/usr/lhCmd30129 ... OK$ shell -f /d/usr/lhCmd30129=============================================================================================$ lhsh 000400 vii0004: ----- VII SERVER INFO -----0004: registered clients:0004: client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN0004: ---------- ----- ---------- -------- -------- ---------------- ------------ ---------- --------0004: 0x000100e7 NO NO NO NO NO YES NO NO0004: 0x00010055 NO NO NO NO NO YES NO NO0004: LED State 0004: GREEN CLS_LEDI_ON 0004: RED CLS_LEDI_OFF 0004: YELLOW CLS_LEDI_ON =============================================================================================$ lhsh 000500 vii0005: ----- VII SERVER INFO -----0005: registered clients:0005: client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN0005: ---------- ----- ---------- -------- -------- ---------------- ------------ ---------- --------0005: 0x000100e7 NO NO NO NO NO YES NO NO0005: 0x00010055 NO NO NO NO NO YES NO NO0005: LED State 0005: GREEN CLS_LEDI_ON


0005: RED CLS_LEDI_OFF 0005: YELLOW CLS_LEDI_ON =============================================================================================$ lhsh 000600 vii0006: ----- VII SERVER INFO -----0006: registered clients:0006: client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN0006: ---------- ----- ---------- -------- -------- ---------------- ------------ ---------- --------0006: 0x000100e7 NO NO NO NO NO NO YES NO0006: LED State 0006: GREEN CLS_LEDI_ON 0006: RED CLS_LEDI_OFF 0006: YELLOW CLS_LEDI_FLASHING_16HZ=============================================================================================$ lhsh 000700 vii0007: ----- VII SERVER INFO -----0007: registered clients:0007: client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN0007: ---------- ----- ---------- -------- -------- ---------------- ------------ ---------- --------0007: 0x000100e7 NO NO NO NO NO NO YES NO0007: LED State 0007: GREEN CLS_LEDI_ON 0007: RED CLS_LEDI_OFF 0007: YELLOW CLS_LEDI_FLASHING_16HZ=============================================================================================$ lhsh 001600 vii0016: ----- VII SERVER INFO -----0016: registered clients:0016: client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN0016: ---------- ----- ---------- -------- -------- ---------------- ------------ ---------- --------0016: 0x000100e7 NO NO NO NO NO NO YES NO0016: LED State 0016: GREEN CLS_LEDI_ON 0016: RED CLS_LEDI_OFF 0016: YELLOW CLS_LEDI_FLASHING_16HZ=============================================================================================$ lhsh 001700 vii0017: ----- VII SERVER INFO -----0017: registered clients:0017: client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN0017: ---------- ----- ---------- -------- -------- ---------------- ------------ ---------- --------0017: 0x000100e7 NO NO NO NO NO NO YES NO0017: LED State 0017: GREEN CLS_LEDI_ON 0017: RED CLS_LEDI_OFF


0017: YELLOW CLS_LEDI_FLASHING_16HZ$

wrbs075> lh all te log read | grep -i restart

0002: [2009-01-23 12:57:37.900] Phy_eqmtLoc_proc eqmtro.c:1458 INFO:COLD restart without test requested from TEM!0002: [2009-01-23 12:57:37.900] Phy_eqmtLoc_proc eqmtro.c:1484 INFO:Cold restart for PIU 4, board product no. ROJ 119 2102/1, rev. *0002: [2009-01-23 12:57:45.920] Phy_eqmtLoc_proc etm4eqmtro.c:2420 INFO:It's restart without cold with test0002: [2009-02-05 11:36:50.204] Sys_Spas_start_proc start.c:2157 INFO:Cold restart of SPAS done.0002: (SPIC hard init, ASCC_A hard init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_COLD.0002: [2009-02-05 11:34:53.664] Phy_eqmtLoc_proc eqmtro.c:1458 INFO:COLD restart without test requested from TEM!0002: [2009-02-05 11:34:53.664] Phy_eqmtLoc_proc eqmtro.c:1484 INFO:Cold restart for PIU 4, board product no. ROJ 119 2102/1, rev. *0002: [2009-02-05 11:35:02.844] Phy_eqmtLoc_proc etm4eqmtro.c:2420 INFO:It's restart without cold with test0002: [2009-02-11 09:10:12.436] Sys_Spas_start_proc start.c:2157 INFO:Cold restart of SPAS done.0002: (SPIC hard init, ASCC_A hard init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_COLD.0002: [2009-02-11 09:13:42.088] Phy_eqmtLoc_proc eqmtro.c:1458 INFO:COLD restart without test requested from TEM!0002: [2009-02-11 09:13:42.088] Phy_eqmtLoc_proc eqmtro.c:1484 INFO:Cold restart for PIU 4, board product no. ROJ 119 2102/1, rev. *0002: [2009-02-11 09:13:50.968] Phy_eqmtLoc_proc etm4eqmtro.c:2420 INFO:It's restart without cold with test0002: [2009-03-10 10:15:07.260] Sys_Spas_start_proc start.c:2412 INFO:Warm restart of SPAS done.0002: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0002: [2009-03-10 10:15:16.992] Phy_eqmtLoc_proc eqmtro.c:1466 INFO:WARM/REFRESH/HOT restart without test requested from TEM!0002: [2009-03-10 10:15:16.992] Phy_eqmtLoc_proc eqmtro.c:1484 INFO:Warm restart for PIU 4, board product no. ROJ 119 2102/1, rev. *0002: [2009-03-10 10:15:17.480] Phy_eqmtLoc_proc etm4eqmtro.c:2420 INFO:It's restart without cold with test0002: [2009-03-11 09:22:48.256] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0002: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_REFRESH.0002: [2009-03-11 09:23:56.704] Phy_eqmtLoc_proc etm4eqmtro.c:540 INFO:Firmware file(s) are not loaded! In case a WARM is requested, escalation to COLD restart will be done.0002: [2009-03-11 09:23:56.704] Phy_eqmtLoc_proc etm4eqmtro.c:567 INFO:In case a WARM is requested, an escalation to COLD restart will be done.0002: [2009-03-11 09:23:56.704] Phy_eqmtLoc_proc eqmtro.c:1466 INFO:WARM/REFRESH/HOT restart without test requested from TEM!0002: [2009-03-11 09:23:56.704] Phy_eqmtLoc_proc eqmtro.c:1469 INFO:Escalated to COLD restart without test!0002: [2009-03-11 09:23:56.704] Phy_eqmtLoc_proc eqmtro.c:1484 INFO:Cold restart for PIU 4, board product no. ROJ 119 2102/1, rev. *0002: [2009-03-11 09:23:58.532] Phy_eqmtLoc_proc etm4eqmtro.c:2420 INFO:It's restart without cold with test0002: [2009-03-11 12:36:49.672] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0002: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0002: [2009-03-11 12:36:52.460] Phy_eqmtLoc_proc eqmtro.c:1466 INFO:WARM/REFRESH/HOT restart without test requested from TEM!0002: [2009-03-11 12:36:52.460] Phy_eqmtLoc_proc eqmtro.c:1484 INFO:Warm restart for PIU 4, board product no. ROJ 119 2102/1, rev. *0002: [2009-03-11 12:36:53.980] Phy_eqmtLoc_proc etm4eqmtro.c:2420 INFO:It's restart without cold with test0002: [2009-03-19 10:00:22.476] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0002: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0002: [2009-03-19 10:00:29.372] Phy_eqmtLoc_proc eqmtro.c:1466 INFO:WARM/REFRESH/HOT restart without test requested from TEM!0002: [2009-03-19 10:00:29.376] Phy_eqmtLoc_proc eqmtro.c:1484 INFO:Warm restart for PIU 4, board product no. ROJ 119 2102/1, rev. *0002: [2009-03-19 10:00:29.604] Phy_eqmtLoc_proc etm4eqmtro.c:2420 INFO:It's restart without cold with test0002: [2009-03-25 12:12:02.556] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0002: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0002: [2009-03-25 12:12:05.076] Phy_eqmtLoc_proc eqmtro.c:1466 INFO:WARM/REFRESH/HOT restart without test requested from TEM!0002: [2009-03-25 12:12:05.076] Phy_eqmtLoc_proc eqmtro.c:1484 INFO:Warm restart for PIU 4, board product no. ROJ 119 2102/1, rev. *0002: [2009-03-25 12:12:06.532] Phy_eqmtLoc_proc etm4eqmtro.c:2420 INFO:It's restart without cold with test0004: [2009-03-25 12:12:02.188] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0004: (SPIC soft init, ASCC_A soft init, ASCC_B not initiated) Input TEMI: CELLO_TEMI_RESTART_WARM.0005: [2009-03-25 12:12:02.160] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0005: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0006: [2009-03-25 12:12:02.208] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0006: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0007: [2009-03-25 12:12:02.440] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0007: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0010: [2009-03-25 12:12:02.224] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.


0010: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0011: [2009-03-19 10:00:22.148] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0011: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0011: [2009-03-25 12:12:02.228] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0011: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0012: [2009-03-19 10:00:17.616] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0012: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0012: [2009-03-25 12:12:02.180] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0012: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0013: [2009-03-11 12:36:49.312] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0013: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0013: [2009-03-19 10:00:22.116] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0013: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0013: [2009-03-25 12:12:02.200] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0013: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0014: [2009-03-19 10:00:22.140] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0014: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0014: [2009-03-25 12:12:02.216] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0014: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0016: [2009-03-25 12:12:02.452] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0016: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0017: [2009-03-25 12:12:02.424] Sys_Spas_start_proc start.c:2413 INFO:Warm restart of SPAS done.0017: (SPIC soft init, ASCC_A soft init, ASCC_B not found) Input TEMI: CELLO_TEMI_RESTART_WARM.0012p0d13: [1970-01-01 00:00:14.908] trxCtrlProc trx_ctrl.c:4460 INFO:Dpd restarted in 40 ms0012p0d13: [2009-03-25 12:11:37.368] trProc trCdc.cc:990 INFO:create().m_ruGlobalStatus.om.trStatus->txCarrierUp = 0x2, restarting DPD0012p0d13: [1970-01-01 00:00:00.000] - xos.c:1448 INFO:SYS_RESTART_CAUSE: COLD0012p0d13: [1970-01-01 00:00:00.000] - xos.c:1452 INFO:IBOOT startRestartCause: IBOOT_CPLD_UART_RESET0012p0d13: [1970-01-01 00:00:02.424] XcbcServer xcbc.c:2101 INFO:Restarting on CXP9012183%6_R1S05 (RU22_LMC)0012p0d13: [1970-01-01 01:11:34.912] - xos.c:1721 INFO:SYS_RESTART_CAUSE: ORDERED0012p0d13: [1970-01-01 01:11:34.912] - xos.c:1725 INFO:IBOOT startRestartCause: IBOOT_SW_RESET

wrbs075> bp ru

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================001200/port_0_dev_13 ** all ru ru1 xp001200/port_4_dev_15 ** all ru ru2 xp001200/port_8_dev_17 ** all ru ru3 xp001300/port_0_dev_14 ** all ru ru4 xp001300/port_4_dev_16 ** all ru ru5 xp001300/port_8_dev_18 ** all ru ru6 xp

wrbs075> lh ru1 help

=============================================================================================$ lhsh 001200/port_0_dev_13 help0012p0d13: Command Description0012p0d13: default shell command0012p0d13: . execute commands from file


0012p0d13: ? print description of commands0012p0d13: ai Access to the AI unit Interface0012p0d13: au3vii Print LED status for all AU3 units or the selected one (au3==AU-type).0012p0d13: biosls List installed bios modules0012p0d13: bl list blocks0012p0d13: ccie ccie shell cmd0012p0d13: cfheflist Get active fault list for c(b)ci or c(d)ci0012p0d13: cfhefmap Get fault mapping0012p0d13: ch Measurement/Correction Channel test interface0012p0d13: channel Measurement/Correction Channel test interface

...<cut>...

RBS121> lh ru fui get vswr

=============================================================================================$ lhsh 001200/port_0_dev_8 fui get vswr0012p0d8: vswr: 0.0[dB]=============================================================================================$ lhsh 001200/port_4_dev_9 fui get vswr0012p4d9: vswr: 0.0[dB]=============================================================================================$ lhsh 001200/port_8_dev_10 fui get vswr0012p8d10: vswr: 0.0[dB]$

RBS122> lh asc asc vswr

....

8.5.4 Example: ERBS

enb17> bp

====================================================Board-Group Nr of Boards====================================================admmp 1all 11allp 1


coremp 1et 1etip 1gcpu 4gcpu1 1gcpu2 1gcpu3 1gcpu4 1mp 1ommp 1ru 6ru1 1ru2 1ru3 1ru4 1ru5 1ru6 1tu 1xp 6====================================================Total: 23 groups

enb17> bp all

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================000100 DUL3 main admmp all allp coremp et etip mp ommp tugcpu00256 ** all gcpu gcpu1gcpu00512 ** all gcpu gcpu2gcpu00768 ** all gcpu gcpu3gcpu01024 ** all gcpu gcpu4BXP_0_1 ** all ru ru1 xpBXP_1_1 ** all ru ru2 xpBXP_2_1 ** all ru ru3 xpBXP_3_1 ** all ru ru4 xpBXP_4_1 ** all ru ru5 xpBXP_5_1 ** all ru ru6 xp===============================================================================================Total: 11 boards

enb17> bp gcpu

===============================================================================================Board BoardType SwAllocation BoardGroups


===============================================================================================gcpu00256 ** all gcpugcpu00512 ** all gcpugcpu00768 ** all gcpugcpu01024 ** all gcpu===============================================================================================Total: 0 boards

enb17> bp ru

===============================================================================================Board BoardType SwAllocation BoardGroups===============================================================================================BXP_0_1 ** all ru ru1 xpBXP_1_1 ** all ru ru2 xpBXP_2_1 ** all ru ru3 xpBXP_3_1 ** all ru ru4 xpBXP_4_1 ** all ru ru5 xpBXP_5_1 ** all ru ru6 ===============================================================================================Total: 1 boards

enb17> lh gcpu dspstat

=============================================================================================$ lhsh gcpu00256 dspstatgcpu00256: -------------------- DSP status -------------------->gcpu00256: Dsp 0: Loaded Started conf:( ) LINK Downgcpu00256: Dsp 1: Loaded Started conf:( ) LINK Downgcpu00256: Dsp 2: Loaded Started conf:( ) LINK Downgcpu00256: Dsp 3: Loaded Started conf:( UPAI_LH_DSP ) LINK Upgcpu00256: Dsp 4: Loaded Started conf:( ) LINK Downgcpu00256: Dsp 5: Loaded Started conf:( ) LINK Down...<cut>>..gcpu01024: Dsp 34: Loaded Stopped conf:( ) LINK Downgcpu01024: Dsp 35: Loaded Stopped conf:( ) LINK Downgcpu01024: <-----------------------------------------------------$

enb17> lh ru fui get vswr

=============================================================================================$ lhsh BXP_0_1 fui get vswrBXP_0_1: vswr: 20.1[dB]=============================================================================================


$ lhsh BXP_1_1 fui get vswrBXP_1_1: vswr: 19.3[dB]=============================================================================================$ lhsh BXP_2_1 fui get vswrBXP_2_1: vswr: 23.3[dB]=============================================================================================$ lhsh BXP_3_1 fui get vswrBXP_3_1: vswr: 20.0[dB]=============================================================================================$ lhsh BXP_4_1 fui get vswrBXP_4_1: vswr: 22.7[dB]=============================================================================================$ lhsh BXP_5_1 fui get vswrBXP_5_1: vswr: 23.8[dB]$

kienb3001> lh all te log read 3600 | grep ERROR

090819-09:33:36 10.64.7.11 7.1t ERBS_NODE_MODEL_A_6_4 stopfile=/tmp/204550001: [1970-01-01 03:55:10.344] Ipom_vls_backend_proc vls_proc.c:295 ERROR:Coli file has signature error.0001: [1970-01-01 03:58:59.020] nc_main_thread boardCtrl.cc:3466 ERROR:Recieved reject signal when trying to start periodic reporting of temperature data.0001: [1970-01-01 03:58:59.020] nc_main_thread boardCtrl.cc:4849 ERROR:Internal data: 0001: [1970-01-01 03:58:59.020] nc_main_thread boardCtrl.cc:4849 ERROR:COMMIT_READY0001: [1970-01-01 03:58:59.020] nc_main_thread boardCtrl.cc:4849 ERROR:thCapabilities.boardEthHwIf.numOfEthLinks = 90001: [1970-01-01 03:58:59.020] nc_main_thread boardCtrl.cc:4852 ERROR:on = 1gcpu00256: [2009-08-19 01:18:43.072] UPP_URB_RBInt urb_int_rb.c:149 ERROR:GCPUWinfo:gcpu00256: [2009-08-19 01:44:55.840] UPP_URB_RBInt urb_int_rb.c:149 ERROR:GCPU_info:gcpu00256: [2009-08-19 01:49:42.760] UPP_URB_RBInt urb_int_rb.c:149 ERROR:GCPU_info:gcpu00256: [2009-08-19 01:18:45.124] UPP_URB_RBInt urb_int_rb.c:149 ERROR:GCPU_info:gcpu00256: [2009-08-19 01:44:56.896] UPP_URB_RBInt urb_int_rb.c:149 ERROR:GCPU_info:gcpu00256: [2009-08-19 01:49:42.824] UPP_URB_RBInt urb_int_rb.c:149 ERROR:GCPU_info:

8.6 Summary

- List all processor addresses: bp all- Run a command on a particular processor: lhsh <processor> <command>Example: lhsh 001400 vii

- List all board groups: bp- List boards of group: bp <group>


- Run commands on all boards of a board group: lh <boardgroup> <commands>Example: lh mp vii;ls -l /d

8.7 COLI Help

8.7.1 Help for the moshell interface to COLI

RNC11> h coli

***************************************************************************************ose/coli command [|<unix command>]***************************************************************************************Send a COLI command to the node's OSE shell. Type "h ose" for syntax help and "?" to view available commands.

The command is sent to the node using either telnet or ssh, depending on the value of the moshell setting "secure_shell" (See chap 2.6)The password is not required if it is defined in the ipdatabase (otherwise, the user will be prompted to enter the password).To find out all available COLI commands, type "?" or "lhsh <lnh> ?"

It is possible to pipe the command to any external utility.Examples: >> ls -l /d/loadmodules | sort -nk 3 (to sort files by size) >> ps | grep CXC (useful to see what processes belong to what LM) >> te log read | /home/eric/tools/decoder.pl | /home/eric/tools/flow.pl >> lhsh 001400 te log read | grep -i error (to search for errors in the te log)

Several commands can be run on the same line by separating each command with a semicolon.If more than 5 commands are specified on the line, then these will be sent via a command file on the node (quicker).The user variable "fast_coli_threshold" controls the number of commands above which a command file will be transferred to the node. By default it is 5 but it is possible to reduce or increase this setting with the "uv" command (see chap 2.5 for more info on uservariables).For instance by setting "fast_coli_threshold" to 0, COLI commands will always run via command file, this can help to avoid printout corruptions (certain commands producing large printouts can sometimes get corrupted by spurious echo characters when run directly without command file).

Examples: >> vii ; pwd ; cd /d/loadmodules ; pwd ; llog >> lhsh 001100 ; vi i ; te e trace1 NBAP* >> lhsh 001400 ; te f i l te r set "([1]<8 OR [1]>=9 AND LEN <> 33)" NBAP* >> lhsh 001400 ; te filter set "[1]<> 8 AND [1] <> $12 AND [1] <> $14 AND [1] <> $11" NBAP* >> lhsh 001400 ; te log freeze -grp state_change "WaitForActivation -> WaitForCapacity" 100 >> lhsh 012000 ; MsbHostMo_StartPing -d 10.173.137.130 -z 10.173.137.1


>> lhsh 000200 ; EtHostMo_startPing -d 10.164.41.132 -h 1 -c 20 -s 54Note that it is safer to do "lhsh <lnh> <command>" instead of "lhsh <lnh> ; command" in case the board is not reachable.Eg: if you want to format /d on board 001400: if you do "lhsh 001400 ; formathd /d" and the board 001400 is not reachable then the command is sent to the Hub MP whereas with the command "lhsh 001400 formathd /d", if the board 001400 is not reachable then the command is not sent at all. But for certain commands like "te filter set", "te log freeze", "EtHostMo_startPing" or "MsbHostMo_StartPing", the semicolon has to be entered after the "lhsh" in order to force moshell to actually log into the board.

Running SQL commands.Examples: >> sql+ (to start the osa_coli program) >> sql select name from tables >> sql select * from tables where name like '%iur%' >> sql select * from cspgmresource_01 where pno='CXC 132 0784' >> sql update cspgmresource_01 set poolsize=20000000 where pno='CXC 132 0784'; commit;Note: If the osa_coli program is running on a different board than the hub MP, semicolons must be put around "sqlc": >> lhsh 001100 ; sqlc ; select * from tables

Running 3GSIM/CORBEN/LOCO commands.Examples: >> crb st >> crb rf -f /c/corben/cmdfile.cmd >> 3gsim lb >> 3gsim lss >> loco ls

Running NCLI commands (note: ncli command completion not supported when run from moshell)Examples:Active alarm list >> ncli alarmsList ncli commands. Print help of the ncli command "search" >> ncli help ; man searchList all MOs >> ncli search . ""List all disabled MOs >> ncli search . "" operationalState==0List all MOs unlocked and disabled >> ncli search . "" operationalState==0 AND administrativeState==1Put all disabled MOs in a group, then read the userLabel attribute of these MOs >> ncli group -a -e ( . "" operationalState==0 ) ; get -group userLabelRead and change userLabel attribute on ManagedElement MO >> ncli ; get . userLabel ; set . userLabel=(String)RNC11 ; get . userLabelAdding/Removing a static route: >> ncli action IpOam=1,Ip=1,IpRoutingTable=1 addStaticRoute (String)"0.0.0.0" (String)"0.0.0.0" (String)"137.58.152.1" (int)110 (boolean)false >> ncli action IpOam=1,Ip=1,IpRoutingTable=1 deleteStaticRoute { destinationIpAddr=(String)"0.0.0.0" destinationNetworkMask=(S


tring)"0.0.0.0" nextHopIpAddr=(String)"137.58.152.1" routeMetric=(int)110 }Other examples >> ncli ; cd TransportNetwork=1 ; search . AtmPort ; search . AtmPort operationalState==0 >> ncli group -a -e(. UpgradePackage);group -l;get -group state;action SwManagement=1,UpgradePackage="CXP9013831_R9YC/6" verifyUpgrade

Running CMXB commands.Examples: >> lhsh 000100 cmxbsh ; help ; ls /bin ; ls /usr/bin ; iss ; help >> lhsh 000000 cmxbsh ; iss ; show interfaces status; show mac-address-table >> lh scb cmxbsh ; iss ; show interfaces status; show mac-address-table

Changing shell password.Examples: >> passwd ; <old password> ; <new password> >> secmode -l 2 ; <new password>

Running commands towards an AXE node.Examples: >> allip >> rxmsp:mo=rxotg-17,subord >> rxbli:mo=rxotrx-17-1 (command will be auto-confirmed)Limitations: it is not possible to release the terminal in order to view "ordered" printouts.

8.7.2 Help for how to use the board groups

RNC11> h bp

***************************************************************************************bo[ar]/ba[swdp]/br[wd]/be[0-50]/bp***************************************************************************************Manage board groups that can be used for running COLI commands on multiple boards.

Syntax: * bo[a][r] * ba[s] /br /bp <boardGroup> <boardLNH>|<boardGroup>|<boardType> * baw[s]/brw <boardGroup> <swa> [<rncMod>] * bad/brd <boardGroup> <devType> [<rncMod>] * bap <boardGroup> <pgm> * be[0-50] <boardGroup> <boardGroup>This set of commands allows the user to create board groups that can be used for running OSE commands on multiple boards.

The following board groups are always created by default after running any of the board commands (bo/ba/br/lh, etc) the first time: * "all" : contains all boards (MP/BP) as well as SPMs (if present).


* "allp" : contains all boards (MP/BP) but not SPMs. * "mp" : contains all MP boards. * "bp" : contains all BP boards. * "coremp": contains the core MP(s), one or two depending on the configuration. * "ommp" : contains the O&M MP(s), one or two depending on the configuration. * "sccpmp": contains the SCCP MP(s) (RNC/MGW only). * "tu" : contains TU boards. * "scx" : contains SCB and SXB boards. * "et" : contains ET boards. * "aal2ap", "aal2nccadm", "aal2cpsrc", "aal2rh" : contain MP boards running the corresponding aal2 programs.In RNC, the following board groups are also created by default, containing MPs/SPMs connected to the various RNC modules: * mod[x] * cc[x] * dc[x] * pdr[x]In RBS, the following board groups are created by default: rax, tx, ru, asc.In MGW the following board groups are created by default: mesc, licdb, ch, stc, gra, imra, raa, msb.

Description: * It is recommended to start running the "bo" command ("board overview") to view what boards are present in the node.The very first time "bo" is run on a node, it will take more time because it has to fetch data from the node. The data is then permanently stored on the workstation so that the command will be quicker the next time moshell is connected to that node. To empty the cache and force moshell to reread the node's board data, just use the "bor" command.By default the "bo" command only shows slots that contain boards defined in the configuration (i.e. boards which are associated with a PlugInUnit MO) but by using option "a" it is possible to view all slots, even those which do not contain a PlugInUnit. * The ba command is used for adding boards into a group.The boards shall be identified by their position or a string matching the board type.The "s" switch adds any related SPMs to the board group.Examples:>>> ba group1 1 2 4-8 114-119 ==> boards 000100, 000200, 000400 to 000800, 011400 to 011900 are added to group1>>> bas group1 223-226 ==> boards 022300 to 022600 are added to group1, together with their related SPs (if these boards are SPBs).>>> ba group1 spb scb 3 4 ==> all boards of type matching "spb" and "scb" are added to group1 as well as boards 000300 and 000400>>> ba group1 scb coremp mod ==> all boards belonging to the groups "coremp" and "mod" are added to group1 as well as boards with type matching "scb">>> ba gpb gpb ==> all boards of type matching "gpb" are adding to the group called "gpb". * The baw command is similar to the ba command except that the boards are identified by their SwAllocation and/or RncModule.Examples:>>> baw moduleMPs module ==> all boards belonging to the SwAllocation maching "module" will be added in the group called "moduleMPs">>> baw module1 .* 1 ==> all boards belonging to rncModule 1 will be added to the group called "module1" * The bad command is for adding SPM's into a board group based on their device type. This is applicable to RNC only.Examples:>>> bad dc dc ==> add all SPM's handling a dc device to the group called "dc".>>> bad dc1 dc 1 ==> add all SPM's handling a dc device on module 1 to the group called "dc1". * The bap command is for adding boards into a board group based on what program(s) they are running. The string is matched against the name of the Program MOs. All PlugInUnit MOs which contain a Program MO whose name matches the string are added to the group.


Examples:>> bap mesc cxc1324881|upcf_*mesc ==> add all boards containing a Program MO whose name matches cxc1324881 or upcf_*mesc into the board group mesc * The br command is for removing a whole group or certain boards out of a group.Examples:>>> br group1 1 3 gpb ==> boards 000100, 000300 and all boards of type matching "gpb" are removed from group1>>> br group2 ==> group2 is removed * The brw command is similar to the br command except that the boards are identified by their SwAllocation and/or RncModule.Examples:>>> brw group3 dc ==> all boards whose SwAllocation matches "dc" will be removed from group3 * The bp command is for printing existing groups or the contents of a particular group. Examples:>>> bp ==> all existing groups are shown, eg: "group1" and "all">>> bp all ==> the contents of the group "all" is shown. * The be command is for extracting a number of boards from a group. To be used in conjunction with "mon" to handle board groups that contain more than 50 boards (the current limit on target monitor). Example:>>> be10 partial_mod mod>>> be20 partial_dc dc>>> ba partial_mod_dc partial_mod partial_dc>>> mon partial_mod_dc

Once the group is created, the "lh" command is used to run an OSE command on all boards of the group."lh all" or just "all" can be used to run a command on all boards of the node.Examples:>>> lh group1 te log read>>> lh group1 te log read | grep ERROR:>>> lh all vii OR: all vii>>> lh all te log read | grep ERROR: OR: all err (special shortcut)It is possible to send multiple commands to each board of the board group by separating them with semicolons.Examples:>>> lh mp te log read ; llog -l ; te log clear ; llog -c>>> lh dc te e trace1 SP_HIST ; te log readIt is also possible to send a command file to each board of the group.Example:>>> lh spb run sp_traces.txtWhen many commands are to be sent, the "lh" function will put them into a command file, transfer that file to the node and run that file from within the node, using the "shell -f" command. This will save a lot of time instead of having to send each command one by one to the node.There is a user variable called fast_lh_threshold which decides the number of commands above which a command file will be transferred to the node. See chap 2.5 and moshell file for more info about user variables.

It is also possible to run MO commands on board groups. In this case, the MO command will execute against the MOs connected to these boards, ie the PlugInUnit or Spm MOs.Eg: acc mod1 restart ---> restart the MP found in board group "mod1" st mp ---> view state of all MP pluginunits acc cc1 restart ---> restart the SPMs found in board group "cc1"Note: in RNC, the "bo" command also creates a number of default MO groups "ccXdev", "dcXdev", "pdrXdev", where X is the module number.


So, in order to lock/unlock some devices, use the MO group instead of the board group since the board group connects to the SPMs which don't have an administrative state.Example: bl cc1devMore info in "h syntax".

RNC11> h lh

***************************************************************************************lh <boardGroup> {<OSE-command>|run <commandfile>} [ | <unix commands>]***************************************************************************************Run COLI commands on all boards of a board group.

See help for bo/ba/baw/br/brw/bp commands, for more info. E.g: type "h bo".

8.7.3 Print the list of COLI commands available in a particular board

RNC11> ?

Trying password from ipdatabase file: /home/eanzmagn/moshell_sitefiles/ipdatabase...$ ?Command Syntax Description. . <command-file> execute commands from file? ? [<command> ...] print syntax and descr. of commandsCentralRnh_pm_counter_disable CentralRnh_pm_counter_disable <one or more counterIds> disable trace for one or more counterIds in this load module. The counterIds are either integer values or symbolic counter names (as defined in roamIfPmCounter.h) separated by blank or tab. Counter names will be matched using substring matching so e.g the name ROAM_UTRANCELL will match all counters defined for this MOCentralRnh_pm_counter_disableall CentralRnh_pm_counter_disableall disable trace for all counterIds in this load module...<cut>...

RNC11> lhsh 001400 ?

$ lhsh 001400 ?Command Syntax Description. . <command-file> execute commands from file? ? [<command> ...] print syntax and descr. of commandsCell_pm_counter_disable Cell_pm_counter_disable <one or more counterIds> disable trace for one or more counterIds in this load module. The counterIds are either integer values or symbolic counter names (as defined in roamIfPmCounter.h) separated by blank or tab. Counter names will be matched using substring matching so e.g the name ROAM_UTRANCELL will match all counters defined for this MOCell_pm_counter_disableall Cell_pm_counter_disableall disable trace for all counterIds in this load module


Cell_pm_counter_enable Cell_pm_counter_enable <one or more counterIds> enable trace for one or more counterIds in this load module. The counterIds are either integer values or symbolic counter names (as defined in roamIfPmCounter.h) separated by blank or tab. Counter names will be matched using substring matching so e.g the name ROAM_UTRANCELL will match all counters defined for this MOCell_pm_counter_enableall Cell_pm_counter_enableall enable trace for all counterIds in this load moduleCell_pm_counter_enabled Cell_pm_counter_enabled print each enabled counterId (or the string "all" if all are enabled)Cell_pm_counter_print Cell_pm_counter_print <zero or more counterIds> print all counter names that match the specified counterIds. The counterI.....<cut>....

RNC11> lhsh 001900/sp0.lnh ?

$ lhsh 001900/sp0.lnh ?Command Syntax Description <command> [<parameters>...] default shell command. . <command-file> execute commands from file? ? [<command> ...] print syntax and descr. of commandsaalcep aalcep < ri | edi | all > Query for AALX CEP informationaalpm aalpm Query for AALX performance informationasconf asconf <asf-name> [<directory>] configure archive serverasconn asconn [-p <pri>] [<asf-name>] <remote-asf> connect archive serverasdisc asdisc [<asf-name>] <remote-asf> disconnect archive serveraslist aslist [<asf-name>] list connected archive serversasupdate asupdate <asf> <lmid update a disk archive serverautodds autodds Set error check level and/or default trace...<cut>....unset unset <variable> ... unset (remove) shell variablesunsetenv unsetenv <env-var> ... unset (remove) environment variablesver ver print version of kernel and shellvols vols [<volume> ...] report volume statisticswho who list who is logged onzzosvarp zzosvarp Show the address of the OSE kernel data handle.[xxx] xxx is optional<yyy> replace yyy with actual valuezz/ww zz or ww... preceeding item may be specified multiple times$

RNC11> lhsh 000100/port_0_dev_7 ?

$ lhsh 000100/port_0_dev_7 ?Command Syntax Description. . <command-file> execute commands from file? ? [<command> ...] print syntax and descr. of commands


bl bl [<block>...] l i s t blockscls cls clear screen (using ANSI codes)...<cut>...time time [hh:mm[:ss]] print or set timeunset unset <variable> ... unset (remove) shell variablesunsetenv unsetenv <env-var> ... unset (remove) environment variablesver ver print version of kernel and shellvii vii [d] Displays current LED request. 'vii d' gives more detailswho who list who is logged on[xxx] xxx is optional<yyy> replace yyy with actual valuezz/ww zz or ww... preceeding item may be specified multiple times$

8.7.4 Print help for a COLI command

For help on a particular COLI command, type “? <command>”, or “man <command>”, “<command> -h”, or “<command>”, or “<command> help”

RNC11> ? te

$ ? teNAME te - Trace & Error Handling commands

SYNOPSIS Take cmd 'man te' for help info

$

RNC11> man te

$ man tete(1) Shell Commands te(1)

Name te - manage tracing

Synopsis te <subcmd> <operands>


Description This command manages the Trace and Error function. The subcommands are described in separate man pages and can be read with command 'man te_ <subcmd> '.

Subcommands config Configure saved traced groups.

default Set trace groups to default.

disable Disable trace groups.

disk Log to disk.

enable Enable trace groups.

filter Set and reset trace bus filter.

log Trace and error logging.

monitor Enable or disable log monitoring.

preset Preset trace groups during interception

save Save current enabled trace groups.

status Display trace group status.

Copyright (c) Ericsson AB 2005 - All Rights Reserved

1/190 80-CNX 901 1047 2005-08-18 te(1)


These commands also described in :- 1/1553-CXA1103151 or 1553-CXA104203 (CPP commands) - 18/1551-AXD10503/1 (RNC commands)- xxx (RBS commands)- xxx (MGW commands)

See http://utran01.epa.ericsson.se/moshell/training/references/cpp and http://utran01.epa.ericsson.se/moshell/training/references/rnc

8.8 Tracing commands (te/fte)

Traces are produced by the SW and written in an area of the RAM memory called the trace and error log (T&E log), 72 KB in size.The trace and error log is handled by the “te” commands. More information about the te commands can be found in the document 1553-CXA104203 (COLI UG).

Examples:- te log read: to print the contents of the T&E log. Traces come in the following format:

$ te log read[2008-06-04 07:06:54.964] sshd_handler_150.236.178.94:2190 packet.c:926 INFO:Connection closed by 150.236.178.94[2008-06-04 11:20:47.000] Sys_OMCSF_teGlobal te_global.c:2050 INFO:Process not found: NBAP[2008-06-04 11:35:05.272] Osa_sysmgr_proc sysmgr.c:4979 INFO:Node uptime 3 days[2008-06-04 11:35:29.692] TargetMonitor_router_proc te_monitor_router_proc.c:212 INFO:Starting up a new Trace & Error Target Monitor Router[2008-06-04 11:35:29.692] TargetMonitor_router_proc te_monitor_router_proc.c:212 INFO:Starting up a new Trace & Error Target Monitor Router[2008-06-04 11:36:23.036] TargetMonitor_router_proc te_monitor_socket.c:398 INFO:The Trace & Error Target Monitor connection has been closed[2008-06-04 11:37:20.740] TargetMonitor_router_proc te_monitor_router_proc.c:156 INFO:Target Monitor router no 1 is being killed on user request[2008-06-04 11:37:20.740] TargetMonitor_router_proc te_monitor_router_proc.c:110 INFO:Failed to set up the socket[2008-06-04 11:37:20.740] TargetMonitor_router_proc te_monitor_router_proc.c:111 INFO:Target monitor router process 0x16306e2 is being terminat


http://utran01.epa.ericsson.se/moshell/training/references/cello

[2004-06-30 13:28:36.683] dcsSchTopC ../src/DcsSchTopC.cpp:447 INFO: dcsSchTopC incarnated on physical thread

Date The path of the source code file, relative to the directory of the user who compiled the code.

Time

Name of the process executing at the time of the printout.

The line in the source code file holding the trace printout

Trace group Trace printout

List of trace groups according to RNC trace guide 18/1551-AXD10503/1 (http://utran01.epa.ericsson.se/moshell/training/references/rnc) - bus_send bus_receive: messages sent and received on external interfaces- info: Used for tracing informational messages. The intention is to use it only for important events, e.g. during a system start to generate some sort of start report.- error: This primitive is used for tracing errors.- enter: Used for tracing a call to a function.- return: Used for tracing a return from a function.- rec_sig: Used for tracing reception of a signal.- send_sig: Used for tracing sending of a signal.- param: This primitive is used for logging of formatted parameters and other values that can be presented as ASCII.- state_change: Used for tracing state changes on a process level.- trace1: Error reporting via Trace Objects. This is either made via one of the function Trace Objects in case the error can be related to a specific function or via the Trace Object

GENERAL_ERROR in case the error can not be related to a specific function Trace Object.- trace2: Start, stop and expirations of timers.- trace3: General Trace Information- trace4: Incarnation, Destruction, Importation, Deportation of Capsule/process.- trace5: Decisions, e.g. if, else, choicepoints etc.- trace6: Tracing Incoming/Outgoing messages- trace7: Tracing Incoming/Outgoing message data- trace8: SP bag tracing (for uehUeCtxt)- trace9: not specified

For CPP, the information contained in each trace group is set on a subsystem basis. Refer to the following documents (can be found in http://utran01.epa.ericsson.se/moshell/training/references/cpp )- CPP Design Rules for T&E 2/10260-CSX10109 (cdmweb.ericsson.se) - Trace and Error Usage Guide 10/1553-CSX 101 09/3- - http://utran01.epa.ericsson.se/utranwiki/CelloInformation/CelloSubsystemTracing


http://utran01.epa.ericsson.se/utranwiki/CelloInformation/CelloSubsystemTracing

http://utran01.epa.ericsson.se/moshell/training/references/cello

http://utran01.epa.ericsson.se/moshell/training/references/rnc

For RBS, refer to the following trace guides - MP traces: 1/0113-70/FCP 103 6014 and https://ericoll.internal.ericsson.com/sites/WCDMA_RBS_MP_SW_Trace_Guide/Wikis/Home.aspx - BB traces: https://ericoll.internal.ericsson.com/sites/wcdma_rbs_bb_traces_and_troubleshooting/Wikis/Home.aspx - UE traces: 3/190 24-10/FCP 103 6505 - more info: http://app4.internal.ericsson.se/Applications/PLM/PLMInfoView.asp?R=11690&arrNID=$80;FGB%20101%20406&sNID=FGB%20101%20406&MenuItemId=25003&MenuIndex=1&Category=28&Type=6&LayoutId={9BF3E335-77F4-44F5-8CED-D1252C0E3B05}&sSchema=Deliveries&PLMAdmin=0&IO=RBS%20Trace%20guide&itemid=25004

- te enable: to enable some trace groups on a particular process or trace object . When a board restarts, all trace conditions are put back to default$ lhsh 001400 te e bus_send bus_receive NBAP_ASN$ lhsh 001400 te e all RANAP_ASN$ lhsh 001400 te e bus_send bus_receive Ans_aal2ap_proc

- te save: to save all trace conditions defined on a particular process or trace object , so that they survive a board restartIt is not recommended to save the trace conditions as this can lead to cyclic board restart in case these traces are causing high CPU load$ lhsh 001400 te save RANAP_ASN$ lhsh 001400 te save Ans_aal2ap_proc

- te disable: to disable some trace groups on particular process or trace object $ lhsh 001400 te d trace1 trace2 RANAP_ASN

- te default: to reset all enabled trace conditions back to default$ lhsh 001400 te default

- te default -restart: to reset all saved trace conditions back to default$ lhsh 001400 te default –restart

- te status: to print which trace objects and processes exist and which trace groups are currently enabled$ te s pid name enabled groups00010057 Sys_Spas_metatag_proc check error info interface object - CLS_ATMPDR_IF_1 check error info interface object - CLS_ATMPDR_IF_2 check error info interface object - CLS_ATMPDR_IF_3 check error info interface object0001004a Sys_OMCSF_teGlobal check error info interface object - CELLO_TEMI_IF check error info interface object - OSA_CMI_IF check error info interface object - Spas_RgRo check error info interface object - SPAS_SGTI_IF check error info interface object0001004f Sys_Spas_seci_proc check error info interface object00010045 Cls_bpID_proc check error info interface object


https://ericoll.internal.ericsson.com/sites/wcdma_rbs_bb_traces_and_troubleshooting/Wikis/Home.aspx

https://ericoll.internal.ericsson.com/sites/WCDMA_RBS_MP_SW_Trace_Guide/Wikis/Home.aspx

0001004b Sys_OMCSF_teLogMain check error info interface object00010036 Cs_visualIndication_proc check error info interface object00010017 Cs_boardManager_proc check error info interface object0001005b Sys_Spas_smid_proc check error info interface object0001005a Sys_Spas_id_proc check error info interface object00010055 Sys_Spas_linktable_proc check error info interface object00010054 Sys_Spas_link_proc check error info interface object00010015 Cls_atmPdr_proc check error info interface object...<cut>...

- te status -restart: to view all saved trace conditions$ lhsh 001400 te s -restart pid name enabled groups - NBAP_ASN check error info bus_send bus_receive interface object

Enhanced “te” command:

RNC11> h fte

*********************************************************************************fte <te_command> [<trace-groups>|all] [<string>] [|<unix-cmds>]*********************************************************************************Filtered trace and error command.

This command is a wrapper for the COLI commands "te" and works in two ways: - fte s [all] : to print trace status. Without the option "all", only the trace objects and processes who have additional trace conditions are shown (similar to "cabe" command).With option "all", all traces objects and processes are shown, even those whose trace conditions are default. - fte <subcommand> [<trace-groups>|all] [<string>]Any "te" subcommand can be specified, e.g. "e" (enable), "save", "config", "default", "preset", etc. The string is matched against all processes and trace objects in that board and a list of te commands are run against every matching process. The pattern matching follows regular expression syntax and is non-case sensitive.

Examples: - List all non-default trace conditions in all boards of the node>> lh all fte s - List all trace conditions in boards that belong to the board-group "mp" and pipe the output to grep lines matching the word ose>> lh mp fte s all | grep -i ose - Enable all traces on processes and trace objects that match the string "dsp.*meas" on board 000800 >> lhsh 000800 fte e all dsp.*meas - Enable and save bus_send and bus_receive on trace objects and processes matching the string nbap|rrc|ranap on all boards of board group "mod"


>> lh mod fte config -run bus_send bus_receive rrc|nbap|ranap

RNC11> fte s

Process Status AddedTraceConditionsSpp_fro_root_proc ena&saved trace2spp_cmd2 ena&saved trace2spp_cmdProxyProc ena&saved trace2Spp_spu_proc ena&saved trace2Spp_spu_slave_proc ena&saved trace2Spp_spm_proc ena&saved trace2Spp_pgm_proc ena&saved trace2Spp_spu_pgm_proc ena&saved trace2Spp_spm_slave_proc ena&saved trace2sshd enabled trace1

RNC11> lh all fte s

Position Board Process Status AddedTraceConditions0008 GPB53 Scc_server_proc ena&saved trace30008 GPB53 Ipac_iphost_udp_om ena&saved trace1 trace2 bus_send0010 GPB53 Spp_fro_root_proc ena&saved trace20010 GPB53 spp_cmd2 ena&saved trace20010 GPB53 spp_cmdProxyProc ena&saved trace20010 GPB53 Spp_spu_proc ena&saved trace20010 GPB53 Spp_spu_slave_proc ena&saved trace20010 GPB53 Spp_spm_proc ena&saved trace20010 GPB53 Spp_pgm_proc ena&saved trace20010 GPB53 Spp_spu_pgm_proc ena&saved trace20010 GPB53 Spp_spm_slave_proc ena&saved trace20010 GPB53 sshd enabled trace10011 GPB53 Spp_fro_root_proc ena&saved trace20011 GPB53 spp_cmd2 ena&saved trace20011 GPB53 spp_cmdProxyProc ena&saved trace20012 GPB53 IRAT_HANDOVER ena&saved trace1 bus_send bus_receive0012 GPB53 RNC_EXCEPTION enabled trace10012 GPB53 UEH_EXCEPTION enabled trace10014 GPB53 RNC_EXCEPTION enabled trace10014 GPB53 UEH_EXCEPTION enabled trace10015 GPB53 RNC_EXCEPTION enabled trace10015 GPB53 UEH_EXCEPTION enabled trace10016 GPB53 RNC_EXCEPTION enabled trace10016 GPB53 UEH_EXCEPTION enabled trace10017 GPB53 RNC_EXCEPTION enabled trace1


0017 GPB53 UEH_EXCEPTION enabled trace10017 GPB53 drhCenDhSpProxyCx ena&saved trace20017 GPB53 drhSpSyncSpProxyC ena&saved trace20018 NOCONTACT0019SP0 RNC_EXCEPTION enabled trace10019SP1 RNC_EXCEPTION enabled trace10019SP2 RNC_EXCEPTION enabled trace10019SP3 RNC_EXCEPTION enabled trace10019SP4 RNC_EXCEPTION enabled trace10020SP0 RNC_EXCEPTION enabled trace10020SP1 RNC_EXCEPTION enabled trace10020SP2 RNC_EXCEPTION enabled trace10020SP3 RNC_EXCEPTION enabled trace10020SP4 RNC_EXCEPTION enabled trace10022SP0 RNC_EXCEPTION enabled trace10022SP1 RNC_EXCEPTION enabled trace10022SP2 RNC_EXCEPTION enabled trace10022SP3 RNC_EXCEPTION enabled trace10022SP4 RNC_EXCEPTION enabled trace10023SP0 RNC_EXCEPTION enabled trace10023SP1 RNC_EXCEPTION enabled trace10023SP2 RNC_EXCEPTION enabled trace10023SP3 RNC_EXCEPTION enabled trace10023SP4 RNC_EXCEPTION enabled trace1

RNC11> lh all fte s all | grep -i nbap

0004 TUB ATM_NBAP - default0004 TUB DNS_NBAP - default0004 TUB IP_NBAP - default0004 TUB MBMS_ASN_NBAP - default0004 TUB NBAP_ASN - default0004 TUB NBAP_ASN_CELL - default0004 TUB NBAP_ASN_PEEK - default0004 TUB RNHNBAP_DED_ROUTING_TABLE - default0004 TUB UE_ASN_NBAP - default0005 TUB ATM_NBAP - default0005 TUB DNS_NBAP - default...<cut>....0022 SPB21 NBAP_ASN_PEEK - default0022 SPB21 RNHNBAP_DED_ROUTING_TABLE - default0022 SPB21 UE_ASN_NBAP - default0023 SPB21 ATM_NBAP - default0023 SPB21 DNS_NBAP - default0023 SPB21 IP_NBAP - default


0023 SPB21 MBMS_ASN_NBAP - default0023 SPB21 NBAP_ASN - default0023 SPB21 NBAP_ASN_CELL - default0023 SPB21 NBAP_ASN_PEEK - default0023 SPB21 RNHNBAP_DED_ROUTING_TABLE - default0023 SPB21 UE_ASN_NBAP - default

RNC11> lhsh 000400 fte e bus_send bus_receive ue.*cell

$ . /d/usr/fteCmd19123$ lhsh 000400 te e bus_send bus_receive UE_CELL_UPDATE$ lhsh 000400 te e bus_send bus_receive UE_COUNTERS_BEST_CELL$ lhsh 000400 te e bus_send bus_receive UE_COUNTERS_CELL$ lhsh 000400 te e bus_send bus_receive UE_COUNTERS_FAILURE_CELL$ lhsh 000400 te e bus_send bus_receive UE_HS_CELL_CHANGE$ lhsh 000400 te e bus_send bus_receive UE_IRAT_CELL_CHANGE$

RNC11> lhsh 000400 fte s

Process Status AddedTraceConditionsUE_HS_CELL_CHANGE enabled bus_send bus_receiveUE_CELL_UPDATE enabled bus_send bus_receiveUE_COUNTERS_BEST_CELL enabled bus_send bus_receiveUE_COUNTERS_CELL enabled bus_send bus_receiveUE_COUNTERS_FAILURE_CELL enabled bus_send bus_receiveUE_IRAT_CELL_CHANGE enabled bus_send bus_receive

WARNING: the command below is very powerful, can activate many traces on many processes. Keep an eye on CPU load !!

RNC11> lh mp fte e all nbap

$ . /d/usr/fteCmd19123$ lhsh 001200 te e all ATM_NBAP$ lhsh 001200 te e all DNS_NBAP$ lhsh 001200 te e all IP_NBAP$ lhsh 001200 te e all MBMS_ASN_NBAP$ lhsh 001200 te e all NBAP_ASN$ lhsh 001200 te e all NBAP_ASN_CELL$ lhsh 001200 te e all NBAP_ASN_PEEK$ lhsh 001200 te e all NbapCommon_froC[0]


$ lhsh 001200 te e all NbapCommon_froC[10]$ lhsh 001200 te e all NbapCommon_froC[11]$ lhsh 001200 te e all NbapCommon_froC[12]$ lhsh 001200 te e all NbapCommon_froC[13]$ lhsh 001200 te e all NbapCommon_froC[14]$ lhsh 001200 te e all NbapCommon_froC[15]$ lhsh 001200 te e all NbapCommon_froC[16]$ lhsh 001200 te e all NbapCommon_froC[17]$ lhsh 001200 te e all NbapCommon_froC[18]....<cut>...........$ lhsh 001700 te e all IP_NBAP$ lhsh 001700 te e all MBMS_ASN_NBAP$ lhsh 001700 te e all NBAP_ASN$ lhsh 001700 te e all NBAP_ASN_CELL$ lhsh 001700 te e all NBAP_ASN_PEEK$ lhsh 001700 te e all RNHNBAP_DED_ROUTING_TABLE$ lhsh 001700 te e all UE_ASN_NBAP$

RNC11> lh mp fte s

Position Board Process Status AddedTraceConditions0008 GPB53 Scc_server_proc ena&saved trace30008 GPB53 Ipac_iphost_udp_om ena&saved trace1 trace2 bus_send0010 GPB53 Spp_fro_root_proc ena&saved trace20010 GPB53 spp_cmd2 ena&saved trace20010 GPB53 spp_cmdProxyProc ena&saved trace20010 GPB53 Spp_spu_proc ena&saved trace20010 GPB53 Spp_spu_slave_proc ena&saved trace20010 GPB53 Spp_spm_proc ena&saved trace20010 GPB53 Spp_pgm_proc ena&saved trace20010 GPB53 Spp_spu_pgm_proc ena&saved trace20010 GPB53 Spp_spm_slave_proc ena&saved trace20010 GPB53 sshd enabled trace10011 GPB53 Spp_fro_root_proc ena&saved trace20011 GPB53 spp_cmd2 ena&saved trace20011 GPB53 spp_cmdProxyProc ena&saved trace20012 GPB53 ATM_NBAP enabled all0012 GPB53 DNS_NBAP enabled all0012 GPB53 IP_NBAP enabled all0012 GPB53 IRAT_HANDOVER ena&saved trace1 bus_send bus_receive0012 GPB53 MBMS_ASN_NBAP enabled all0012 GPB53 NBAP_ASN enabled all0012 GPB53 NBAP_ASN_CELL enabled all


0012 GPB53 NBAP_ASN_PEEK enabled all0012 GPB53 RNHNBAP_DED_ROUTING_TABLE enabled all0012 GPB53 UE_ASN_NBAP enabled all0012 GPB53 roamFroNbapCommonDbComPT enabled all0012 GPB53 roamFroNbapCommonMaoComPT enabled all0012 GPB53 roamFroNbapCommonRoComPT enabled all0012 GPB53 roamFroNbapDedicatedDbComPT enabled all0012 GPB53 roamFroNbapDedicatedMaoComPT enabled all0012 GPB53 roamFroNbapDedicatedRoComPT enabled all0012 GPB53 roamFroNbapDedicatedC enabled all0012 GPB53 roamFroNbapDedicatedApplication enabled all0012 GPB53 roamFroNbapDedicatedFroHandlerC enabled all0012 GPB53 roamFroNbapDedicatedRoExtAdapte enabled all0012 GPB53 roamFroNbapDedicatedCoordinator enabled all0012 GPB53 roamFroNbapDedicatedComLayerC enabled all0012 GPB53 roamFroNbapDedicatedMaoProxyC enabled all0012 GPB53 roamFroNbapDedicatedRoProxyC enabled all0012 GPB53 roamFroNbapCommonC enabled all0012 GPB53 roamFroNbapCommonApplicationLay enabled all0012 GPB53 roamFroNbapCommonFroHandlerC enabled all0012 GPB53 roamFroNbapCommonRoExtAdapterC enabled all0012 GPB53 roamFroNbapCommonCoordinatorC enabled all0012 GPB53 roamFroNbapCommonComLayerC enabled all0012 GPB53 roamFroNbapCommonMaoProxyC enabled all0012 GPB53 roamFroNbapCommonRoProxyC enabled all0012 GPB53 NbapCommon_froC[0] enabled all0012 GPB53 NbapCommon_froC[1] enabled all...<cut>....0017 GPB53 ATM_NBAP enabled all0017 GPB53 DNS_NBAP enabled all0017 GPB53 IP_NBAP enabled all0017 GPB53 MBMS_ASN_NBAP enabled all0017 GPB53 NBAP_ASN enabled all0017 GPB53 NBAP_ASN_CELL enabled all0017 GPB53 NBAP_ASN_PEEK enabled all0017 GPB53 RNHNBAP_DED_ROUTING_TABLE enabled all0017 GPB53 UEH_EXCEPTION enabled trace10017 GPB53 UE_ASN_NBAP enabled all0017 GPB53 drhCenDhSpProxyCx ena&saved trace20017 GPB53 drhSpSyncSpProxyC ena&saved trace2

Checking total cpu load in the node:

RNC11> cabl


============================================================================================SMN APN BOARD TOTLOAD SPPROCLOAD============================================================================================ 0 1 SCB3 1.8 0 4 TUB 0.5 0 5 TUB 0.5 0 6 ET-M4 1.2 0 7 ET-M4 0.9 0 8 GPB53 4.3 0 9 GPB53 0.5 0 10 GPB53 2.9 0 11 GPB53 2.6 0 12 GPB53 0.4 0 13 GPB53 0.0 0 14 GPB53 66.7 0 15 GPB53 0.0 0 16 GPB53 39.5 0 17 GPB53 2.6 0 18 NOCONTACT 0 19 SPB21 16.4 1.0 14.1 40.9 46.3 34.2 0 20 SPB21 13.7 1.1 13.5 38.5 43.1 43.1 0 22 SPB21 5.7 1.1 11.9 38.4 36.6 51.2 0 23 SPB21 10.8 0.9 11.6 30.6 40.0 41.1 0 26 ET-M4 3.0 0 27 ET-M4 5.6 0 0 SCB3 1.3 --------------------------------------------------------------------------------------------

following command is faster:

RNC11> pget plug load

=================================================================================================================MO Attribute Value=================================================================================================================Subrack=MS,Slot=28,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=27,PlugInUnit=1 pmProcessorLoad 4Subrack=MS,Slot=26,PlugInUnit=1 pmProcessorLoad 2Subrack=MS,Slot=23,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=22,PlugInUnit=1 pmProcessorLoad 16Subrack=MS,Slot=20,PlugInUnit=1 pmProcessorLoad 12Subrack=MS,Slot=19,PlugInUnit=1 pmProcessorLoad 14


Subrack=MS,Slot=18,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=17,PlugInUnit=1 pmProcessorLoad 1Subrack=MS,Slot=16,PlugInUnit=1 pmProcessorLoad 42Subrack=MS,Slot=15,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=14,PlugInUnit=1 pmProcessorLoad 44Subrack=MS,Slot=13,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=12,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=11,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=10,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=9,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=8,PlugInUnit=1 pmProcessorLoad 3Subrack=MS,Slot=7,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=6,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=5,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=4,PlugInUnit=1 pmProcessorLoad 0Subrack=MS,Slot=1,PlugInUnit=1 pmProcessorLoad 0=================================================================================================================Total: 23 MOs

Trace Overload Protection (introduced in CPP8)

By default the trace overload protection is disabled:

RNC49> lh all te alt status | grep protection

0000: Trace & Error overload protection is currently disabled.0001: Trace & Error overload protection is currently disabled.0004: Trace & Error overload protection is currently disabled.0005: Trace & Error overload protection is currently disabled.0006: Trace & Error overload protection is currently disabled.0007: Trace & Error overload protection is currently disabled.0008: Trace & Error overload protection is currently disabled.0009: Trace & Error overload protection is currently disabled.0010: Trace & Error overload protection is currently disabled.0011: Trace & Error overload protection is currently disabled.0012: Trace & Error overload protection is currently disabled.0013: Trace & Error overload protection is currently disabled.0014: Trace & Error overload protection is currently disabled.0015: Trace & Error overload protection is currently disabled.0016: Trace & Error overload protection is currently disabled.0017: Trace & Error overload protection is currently disabled.0018: Trace & Error overload protection is currently disabled.


0019: Trace & Error overload protection is currently disabled.0019SP0: Trace & Error overload protection is currently disabled.0019SP1: Trace & Error overload protection is currently disabled.0019SP2: Trace & Error overload protection is currently disabled.0019SP3: Trace & Error overload protection is currently disabled.0019SP4: Trace & Error overload protection is currently disabled.0020: Trace & Error overload protection is currently disabled.0020SP0: Trace & Error overload protection is currently disabled....<cut>....0023SP4: Trace & Error overload protection is currently disabled.0024: Trace & Error overload protection is currently disabled.0025: Trace & Error overload protection is currently disabled.0026: Trace & Error overload protection is currently disabled.0027: Trace & Error overload protection is currently disabled.

Enable the trace overload protection:

This means that when the CPU load goes above 95% , all trace conditions except error traces become disabled.

RNC49> lh all te alt start

=============================================================================================$ lhsh 000000 te alt start0000: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 000100 te alt start0001: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 000400 te alt start0004: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 000500 te alt start0005: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 000600 te alt start0006: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 000700 te alt start0007: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 000800 te alt start0008: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 000900 te alt start0009: Trace & Error overload protection is enabled.


=============================================================================================$ lhsh 001000 te alt start0010: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 001100 te alt start0011: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 001200 te alt start0012: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 001300 te alt start0013: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 001400 te alt start0014: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 001500 te alt start...<cut>....0023SP2: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 002300/sp3.lnh te alt start0023SP3: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 002300/sp4.lnh te alt start0023SP4: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 002400 te alt start0024: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 002500 te alt start0025: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 002600 te alt start0026: Trace & Error overload protection is enabled.=============================================================================================$ lhsh 002700 te alt start0027: Trace & Error overload protection is enabled.$

RNC49> lh all te alt status | grep protection

0000: Trace & Error overload protection is currently enabled.0001: Trace & Error overload protection is currently enabled.0004: Trace & Error overload protection is currently enabled.0005: Trace & Error overload protection is currently enabled.


0006: Trace & Error overload protection is currently enabled.0007: Trace & Error overload protection is currently enabled.0008: Trace & Error overload protection is currently enabled.0009: Trace & Error overload protection is currently enabled.0010: Trace & Error overload protection is currently enabled.0011: Trace & Error overload protection is currently enabled.0012: Trace & Error overload protection is currently enabled.0013: Trace & Error overload protection is currently enabled.0014: Trace & Error overload protection is currently enabled.0015: Trace & Error overload protection is currently enabled.0016: Trace & Error overload protection is currently enabled.0017: Trace & Error overload protection is currently enabled.0018: Trace & Error overload protection is currently enabled.0019: Trace & Error overload protection is currently enabled.0019SP0: Trace & Error overload protection is currently enabled.0019SP1: Trace & Error overload protection is currently enabled.0019SP2: Trace & Error overload protection is currently enabled.0019SP3: Trace & Error overload protection is currently enabled.0019SP4: Trace & Error overload protection is currently enabled.0020: Trace & Error overload protection is currently enabled.0020SP0: Trace & Error overload protection is currently enabled.0020SP1: Trace & Error overload protection is currently enabled.0020SP2: Trace & Error overload protection is currently enabled.0020SP3: Trace & Error overload protection is currently enabled.0020SP4: Trace & Error overload protection is currently enabled.0021: Trace & Error overload protection is currently enabled.0021SP0: Trace & Error overload protection is currently enabled.0021SP1: Trace & Error overload protection is currently enabled.0021SP2: Trace & Error overload protection is currently enabled.0021SP3: Trace & Error overload protection is currently enabled.0021SP4: Trace & Error overload protection is currently enabled.0022: Trace & Error overload protection is currently enabled.0022SP0: Trace & Error overload protection is currently enabled.0022SP1: Trace & Error overload protection is currently enabled.0022SP2: Trace & Error overload protection is currently enabled.0022SP3: Trace & Error overload protection is currently enabled.0022SP4: Trace & Error overload protection is currently enabled.0023: Trace & Error overload protection is currently enabled.0023SP0: Trace & Error overload protection is currently enabled.0023SP1: Trace & Error overload protection is currently enabled.0023SP2: Trace & Error overload protection is currently enabled.0023SP3: Trace & Error overload protection is currently enabled.0023SP4: Trace & Error overload protection is currently enabled.0024: Trace & Error overload protection is currently enabled.0025: Trace & Error overload protection is currently enabled.


0026: Trace & Error overload protection is currently enabled.0027: Trace & Error overload protection is currently enabled.

Disabling the trace overload protection:

RNC49> lh all te alt stop

$ lhsh 000000 te alt stop0000: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 000100 te alt stop0001: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 000400 te alt stop0004: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 000500 te alt stop0005: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 000600 te alt stop0006: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 000700 te alt stop0007: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 000800 te alt stop0008: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 000900 te alt stop0009: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001000 te alt stop0010: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001100 te alt stop0011: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001200 te alt stop0012: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001300 te alt stop0013: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001400 te alt stop0014: Trace & Error overload protection is disabled.


=============================================================================================$ lhsh 001500 te alt stop0015: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001600 te alt stop0016: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001700 te alt stop0017: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001800 te alt stop0018: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001900 te alt stop0019: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001900/sp0.lnh te alt stop0019SP0: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001900/sp1.lnh te alt stop0019SP1: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001900/sp2.lnh te alt stop0019SP2: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001900/sp3.lnh te alt stop0019SP3: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 001900/sp4.lnh te alt stop0019SP4: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 002000 te alt stop0020: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 002000/sp0.lnh te alt stop0020SP0: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 002000/sp1.lnh te alt stop...<cut>...0023SP4: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 002400 te alt stop0024: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 002500 te alt stop


0025: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 002600 te alt stop0026: Trace & Error overload protection is disabled.=============================================================================================$ lhsh 002700 te alt stop0027: Trace & Error overload protection is disabled.$

More info:

RNC49> man te_alt

$ man te_altte alt(1) te alt(1)

Name te alt - operate on alternate trace group setting

Synopsis te alt start

te alt stop

te alt status <item>

te alt default <item>

te alt enable <group> ... <item>

te alt disable <group> ... <item>

Description This command enables, disables or displays alternate trace groups of an item (or items). An item can be a process, an interface or a trace object. The specified item (or items) must be registered with the Trace and Error handling function. That is, the item is already created and it is executing. This command is also used to start or stop the trace overload protection mechanism.

The Trace and Error function includes an overload protection mechanism that reduces the risk of overload, that might occur during heavy tracing. This is done using an alternate trace group setting to be used in high load situations, that is, if CPU usage exceeds 95%.


Subcommands start Start Trace and Error overload protection. Trace and Error overload protection is disabled by default.

stop Stop Trace and Error overload protection. This configuration survives any type of restart.

status Display alternate trace group status.

default Set alternate trace groups to default.

enable Enable alternate trace groups.

disable Disable alternate trace groups.

Operands item Name of the item on which the subcommand is applied. If several instances of an item are running, the subcommand is applied on all the instances. The item name can be prefixed with the instance name, such as instance_id/item , to apply the subcommand on a specific instance. You can specify more than one item by using a wildcard (*) at the end of the name.

NOTE Wildcard (*) is not allowed for the subcommands: enable and disable .

group Can be one of: check, error, info, trace1 to trace9, state_change, bus_send, bus_receive, rec_sig, send_sig, param, user1 to user4. The groups: all , enter and return , are not available for alternate trace group setting. The default alternate trace group is error .

Examples Example 1. Start Trace and Error overload protection:

$ te alt start Trace & Error overload protection is enabled. $


Example 2. Stop Trace and Error overload protection:

$ te alt stop Trace & Error overload protection is disabled. $

Example 3. Display the status of alternate trace groups for all currently executing processes that have registered with the Trace and Error handling function:

$ te alt status or te alt status * pid name enabled groups 00010037 Sys_OMCSF_teLogMain error 00010036 Sys_OMCSF_teGlobal error 00010038 bmMpRole error Trace & Error overload protection is currently enabled. Total alternative masks in use = 0

Example 4. Reset the alternate trace group setting to the default trace groups (that is error ) :

$ te alt default

Example 5. Reset the alternate trace group setting to the default trace groups for the process, Sys_OMCSF_teLocal :

$ te alt default Sys_OMCSF_teLocal

Example 6. Enable alternate trace group info for the item, Sys_OMCSF_teLogMain:

$ te alt enable info Sys_OMCSF_teLogMain

Example 7. Enable alternate trace group info for the items startingFinn Magnusson 2011-07-10 rev PA36 402/527)

with Sys_OMCSF_:

$ te alt enable info Sys_OMCSF* Not al lowed to speci fy wildcard on process names for alternate group masks $

Example 8. Disable alternate trace group info for the item, Sys_OMCSF_teLogMain:

$ te alt disable info Sys_OMCSF_teLogMain

See also See also te.

Copyright (c) Ericsson AB 2010. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner.

13/190 80-CNX 901 1047 2010-06-09 te alt(1)$

How to know which trace groups to enable?

- Look in the trace guides - If not sure which trace groups to enable, just enable “all” and then check which traces have the most relevant information, then run “te default” and just enable those trace groups.

RNC11> lhsh 001400 te e all Act_usaalServer_proc

$ lhsh 001400 te e all Act_usaalServer_proc$

RNC11> lhsh 001400 te s Act_usaalServer_proc

$ lhsh 001400 te s Act_usaalServer_proc pid name enabled groups000300f3 Act_usaalServer_proc check error enter return info trace1 trace2 trace3 trace4 trace5 trace6 trace7 trace8 trace9 state_change bus_send bus_receive rec_sig send_sig param interface object user1 user2 user3 user4$


RNC11> lhsh 001400 te log read

$ lhsh 001400 te log read[2008-11-28 12:24:39.708] Act_usaalServer_proc Sscop.c:1554 TRACE6:SscopStatPDUnrOfListEl = 0 NPS = 145165 NMR = 124084 NR = 124054 [2008-11-28 12:24:39.708] Act_usaalServer_proc Sscop.c:1663 TRACE6:Sscop STAT variables before update:VTPA = 145164 VTA = 124054 VTMS = 124084 [2008-11-28 12:24:39.708] Act_usaalServer_proc Sscop.c:1694 TRACE6:Sscop STAT variables:VTPA = 145165 VTMS = 124084 VTS = 124054 VTA = 124054 i = 0 VTPS = 145165 oldVTPA = 145164

[2008-11-28 12:24:39.708] Act_usaalServer_proc SscopTimer.c:165 TRACE6:Stop TimerKeepAlive[2008-11-28 12:24:39.708] Act_usaalServer_proc SscopTimer.c:145 TRACE6:Stop TimerNoResp[2008-11-28 12:24:39.708] Act_usaalServer_proc SscopTimer.c:178 TRACE6:Start TimerIdle[2008-11-28 12:24:39.708] Act_usaalServer_proc usaalcepro.c:978 PARAM:Requested Cep = 53

[2008-11-28 12:24:39.708] Act_usaalServer_proc ActSscop.c:960 TRACE6:Received STAT cepId = 53 clientId = 5199

[2008-11-28 12:24:39.708] Act_usaalServer_proc Sscop.c:1554 TRACE6:SscopStatPDUnrOfListEl = 0 NPS = 127954 NMR = 94346 NR = 94246 [2008-11-28 12:24:39.708] Act_usaalServer_proc Sscop.c:1663 TRACE6:Sscop STAT variables before update:VTPA = 127953 VTA = 94245 VTMS = 94345 [2008-11-28 12:24:39.708] Act_usaalServer_proc Sscop.c:1694 TRACE6:Sscop STAT variables:VTPA = 127954 VTMS = 94346 VTS = 94246 VTA = 94246 i = 0 VTPS = 127954 oldVTPA = 127953

[2008-11-28 12:24:39.708] Act_usaalServer_proc SscopTimer.c:137 TRACE6:Start TimerNoResp[2008-11-28 12:24:39.708] Act_usaalServer_proc usaalcepro.c:978 PARAM:Requested Cep = 3

[2008-11-28 12:24:39.708] Act_usaalServer_proc ActSscop.c:905 TRACE5:Received SD seqNr=267312, cepId = 3 clientId = 65541First data: 33 ad 1 4

[2008-11-28 12:24:39.708] Act_usaalServer_proc Sscop.c:1197 TRACE6:Sscop SD variables:NS = 267312 VRMR = 267342 VRR = 267312 VRH = 267312

[2008-11-28 12:24:39.708] Act_usaalServer_proc ActSscfUni.c:1644 TRACE5:DataInd sent to 0x2010B, clientId = 65541[2008-11-28 12:24:39.708] Act_usaalServer_proc lm_uni.c:545 ENTER:LmReport[2008-11-28 12:24:39.708] Act_usaalServer_proc lm_uni.c:602 RETURN[2008-11-28 12:24:39.708] Act_usaalServer_proc actsaalproc.c:335 REC SIG:signo:43046 sender :101a1 DataReq cepId = 111userplanePid = 196851sduLength = 52

...<cut>...Finn Magnusson 2011-07-10 rev PA36 404/527)

[2008-11-28 12:24:39.768] Act_usaalServer_proc ActSscop.c:905 TRACE5:Received SD seqNr=323864, cepId = 87 clientId = 5184First data: 12 4e 0 6

[2008-11-28 12:24:39.768] Act_usaalServer_proc Sscop.c:1197 TRACE6:Sscop SD variables:NS = 323864 VRMR = 323964 VRR = 323864 VRH = 323864

[2008-11-28 12:24:39.768] Act_usaalServer_proc ActSscfUni.c:1644 TRACE5:DataInd sent to 0x101A1, clientId = 5184[2008-11-28 12:24:39.768] Act_usaalServer_proc lm_uni.c:545 ENTER:LmReport[2008-11-28 12:24:39.768] Act_usaalServer_proc lm_uni.c:602 RETURN$

RNC11> lhsh 001400 te default Act_usaalServer_proc

lhs$ lhsh 001400 te default Act_usaalServer_proch$

RNC11> lhsh 001400 te e trace6 Act_usaalServer_proc

$ lhsh 001400 te e trace6 Act_usaalServer_proc$

More information on T&E:

- COLI user guide 1/1553-CXA1103151 or 1553-CXA104203 or on http://utran01.epa.ericsson.se/moshell/training/references/cpp/ - Trace and Error Usage Guide 10/1553-CSX 101 09/3 Uen- Design Rules: Trace & Error Handling 12/0363-3/FCP 103 2175 Uen- CADE Debug Tools Users Guide 1553-LXA 119 1204- ZPM tool Users Guide 1553-LXA 119 1204/1- CPP Troubleshooting Guide, 4/1553-CSX 101 09/3 Uen- Interface Tracing 1553-CXA 104 207 Uen- CPP System Description 1551-CSX 101 09 Uen- Design Rules for Trace and Error Users 2/102 60-CSX 101 09 Uen- Tracing Interface 155 19-1/CXA 104 207 Uen

or the “man” command on the node:

RNC11> man te

$ man tete(1) Shell Commands te(1)

NameFinn Magnusson 2011-07-10 rev PA36 405/527)

http://utran01.epa.ericsson.se/moshell/training/references/cello/

te - manage tracing

Synopsis te <subcmd> <operands>

Description This command manages the Trace and Error function. The subcommands are described in separate man pages and can be read with command 'man te_ <subcmd> '.

Subcommands config Configure saved traced groups.

default Set trace groups to default.

disable Disable trace groups.

disk Log to disk.

enable Enable trace groups.

filter Set and reset trace bus filter.

log Trace and error logging.

monitor Enable or disable log monitoring.

preset Preset trace groups during interception

save Save current enabled trace groups.

status Display trace group status.


1/190 80-CNX 901 1047 2005-08-18 te(1)$


RNC11> man te_log

$ man te_logte log(1) Shell Commands te log(1)

Name te log - trace and error logging

Synopsis te log clear

te log freeze [-grp <group>] [<message> [<count>]]

te log read [-rel | -mon] [<time>]

te log resume

Description This command manages the Trace and Error logs.

Limitations Settings made with the command, te log freeze do not survive a board restart.

Subcommands clear This subcommand clears the Trace and Error log. All currently stored log entries are removed.

freeze This subcommand freezes the Trace and Error log. A frozen log disables any further logging. If no option is specified, the log is frozen immediately. -grp is specified, the log is frozen when the trace event matches the group. If <message> is specified, the message will be matched with every logged message. If a match is found, the <count> operand controls the number of additional messages that are logged when a matching freeze message has been found.

read This subcommand reads the Trace and Error log. During the reading of the log, all logging is disabled, that is, the log is frozen.

resume This subcommand immediately resumes the logging in the Trace and Error log. It also clears not yet activated freeze commands.

Options


-grp Specify that the <message> is to be matched only for log entries with the specified trace <group>. If this option is used without specifying a freeze <message>, the log is frozen when the first entry, belonging to the specified trace <group>, is logged.

-mon Dump the log to the monitor instead of to the shell itself. A monitor must be connected when using this option.

NOTE The -rel option cannot be used in combination with the -mon option, as the monitor itself controls the format of the timestamp.

-rel Present the timestamps for the log entries, using the time relative to when the node was started. If this option is not specified, the default is to display the timestamps using absolute time.

Operands...<cut>....

Examples Resume the logging in the Trace and Error log:

$ te log resume

Freeze the log immediately:

$ te log freeze

Freeze the log whenever the freeze message, my_log_string is matched:

$ te log freeze "my_log_str ing"

Freeze the log whenever the freeze message, my_log_str ing is matched in a log entry in trace group info :

$ te log freeze -grp info "my_log_string"

Freeze the log whenever the first log entry, belonging to the trace group, error is logged:

$ te log freeze -grp error


Start freezing the log whenever the freeze message, my_log_string is matched, and then save 100 more messages:

$ te log freeze "my_log_str ing" 100

Clear the trace and error log:

$ te log clear

Read the log, and dump it to the shell:

$ te log read

Read the log, and dump it to the monitor:

$ te log read -mon

Read the log, and dump only those log records created within the last 60 seconds, to the shell:

$ te log read 60

The following is an example of what log entries can look like:

[1997-10-02 15:31:52.510] OMCSF_teTest2 test.c:619 TRACE2:The board has been loaded [1997-10-02 15:31:52.960] OMCSF_teTest11 test.c:492 ENTER:testFunction [1997-10-02 15:31:52.964] OMCSF_teTest11 test.c:494 RETURN [1997-10-02 15:31:53.520] OMCSF_teTest1 test.c:618 TRACE1:Received parameter value 4 [1997-10-02 15:31:53.520] OMCSF_teTest1 test.c:632 BUS SEND:Sending control data 0000 54 68 69 73 20 69 73 20 61 20 6C 6F 74 20 6F 66 'This is a lot of' 0010 20 62 69 6E 61 72 79 20 64 61 74 61 3A 20 01 02 ' binary data: ..' 0020 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 80 '................' 0030 80 82 83 84 85 86 87 F5 FF '.........' [1997-10-02 15:31:54.510] OMCSF_teTest2 test.c:619 TRACE2:The board has been loaded [1997-10-02 15:31:54.620] OMCSF_teTest1 test.c:618 TRACE1:Received parameter value 5

See also See also te.



7/190 80-CNX 901 1047 2006-04-06 te log(1)$

8.9 Target monitor

The target monitor (CXC1326054) is a program runing in the Core MPs which allows to send the contents of the trace and error log to a monitoring client so that the traces can be viewed in real time as they are written to the “te log”.Each processor can be attached to a TCP or UDP port and the output of the T&E log of those processors is then redirected to a monitor client that is listening to that port. More info: 6/155 18-CRX 102 01/1

8.9.1 TCP Mode

When the Target monitor is running in TCP mode: - only one client at a time can monitor a particular processor. - there can be up to 9 clients simultaneously monitoring the same node - a total of up to 50 processors can be monitored simultaneously


CPP Node

Central MP

Target Monitor Server Program

Workstation

Target Monitor Client



.

.

.

.

TCP: 33079

TCP: 33080

TCP: 33087

.

.

.

.

Processor 1

Processor 2

Processor 3

Processor 4

Processor 5

Processor 6

The target monitor program is activated in different ways depending on the CPP version. This is handled by the moshell command “mon”. The moshell package also includes a monitor client called monitor6054.Board groups can be used as input to the mon command to specify which boards shall be monitored.

RNC11> h mon

*******************************************************mon+/mon-/mon?/mon [<boardGroup(s)>]*******************************************************Purpose: To start/stop/check the target monitor server on the node and/or start the monitor client for one or more board Group(s)....<cut>...


Opening the ports

(using linkhandlers)

RNC11> mon 000400 000500

or:

(using board groups)

RNC11> mon tu

******** Opening new handle:$ lhsh 001100 tm -tcp -win 1New monitor router process 0x10348 is started and listening to port 33080.To attach link handlers, use handle 4.

******** Attaching boards to handle:$ lhsh 001100 tm -attach 4 000400 000500

To start the monitor client, run the following command (type "h mon" for more info):/home/eanzmagn/moshell/monitor6054 137.58.194.147 33080

$moncommand = /home/eanzmagn/moshell/monitor6054 137.58.194.147 33080

Starting the client from a new window:

** NONE ** eanzmagn@srld7243:=> /home/eanzmagn/moshell/monitor6054 137.58.194.147 33080 | tee logfile[Welcome to the Trace & Error Client: Press Ctrl-C to exit][Monitor Client v0.4 - By David Smith (esmidav)][No parameters sent to target][Attempting connection to TargetMonitor on port: 33080][Trying to contact the Trace & Error Log via link handler '000400'...][Trying to contact the Trace & Error Log via link handler '000500'...][Contact established with the Trace & Error Log via link handler '000400'][Connection accepted by the Trace & Error Log via link handler '000400'][Contact established with the Trace & Error Log via link handler '000500'][Connection accepted by the Trace & Error Log via link handler '000500'][2008-06-04 12:24:16.496] 000400/Nss_tuControl_proc nss_tu_control_smAny.c:1619 ENTER:function: forwardSignalToSystemClock[2008-06-04 12:24:16.496] 000400/Nss_tuControl_proc nss_tu_control_smAny.c:1714 RETURN[2008-06-04 12:24:16.496] 000400/Nss_tuControl_proc nss_tu_control_sm.c:553 ENTER:ctrlMapStateIndex


[2008-06-04 12:24:16.496] 000400/Nss_tuControl_proc nss_tu_control_sm.c:572 RETURN[2008-06-04 12:24:16.496] 000400/Nss_tuControl_proc nss_tu_control_sm.c:493 ENTER:ctrlMapSignalIndex[2008-06-04 12:24:16.496] 000400/Nss_tuControl_proc nss_tu_control_sm.c:537 RETURN[2008-06-04 12:24:16.496] 000400/Nss_tuControl_proc nss_tu_control_smState.c:596 ENTER:storeDacValuesToFlash[2008-06-04 12:24:16.496] 000500/Nss_tuControl_proc nss_tu_control_smAny.c:1619 ENTER:function: forwardSignalToSystemClock[2008-06-04 12:24:16.496] 000400/Nss_tuControl_proc nss_tu_control_smState.c:597 TRACE2:Recv: TU_OSE_TIMER_STORE_DAC_IND

to stop the monitoring session: CTRL-C

Checking list of ongoing monitoring sessions

RNC11> mon?

$ lhsh 001000 tm -status

Target Monitor Status=====================Channel is TCP-channel connected

Monitor Information:===================Monitor handle 1 active - handling process PID = 0xe70362Monitor handle 3 active - handling process PID = 0x5b408aeMonitor handle 4 active - handling process PID = 0x2f708b2

Link handler information:=========================Log number 0 : pending connection to link handler 000800, monitor handle 3, absolute time stampLog number 1 : pending connection to link handler 000900, monitor handle 3, absolute time stampLog number 2 : pending connection to link handler 001000, monitor handle 3, absolute time stampLog number 3 : pending connection to link handler 001100, monitor handle 3, absolute time stampLog number 4 : pending connection to link handler 001200, monitor handle 3, absolute time stampLog number 5 : pending connection to link handler 001300, monitor handle 3, absolute time stampLog number 6 : pending connection to link handler 001400, monitor handle 3, absolute time stampLog number 7 : pending connection to link handler 001500, monitor handle 3, absolute time stampLog number 8 : pending connection to link handler 001600, monitor handle 3, absolute time stampLog number 9 : pending connection to link handler 001700, monitor handle 3, absolute time stampLog number 10 : pending connection to link handler 000400, monitor handle 4, absolute time stampLog number 11 : pending connection to link handler 000500, monitor handle 4, absolute time stamp$

Closing a monitoring session:


ctrl-C on the monitor6054 session in workstation

or

RNC11> tm -close 4

$ tm -close 4Monitor 4 has been shut down.$

Closing all monitoring session

RNC11> mon-

$ lhsh 001000 tm -disconnectAll monitored boards are disconnected and Target Monitor has shut down.$

Target monitor limitations

The target monitor program is by default configured with 3 MB pool size.This allows monitoring up to 50 boards simultaneously.In order to increase this limit to 200 boards, it is necessary to increase the pool size to 16 MB:

set program=CXC1326054_Rxxx poolsize 16000000set loadmodule=CXC1326054_Rxxx oseprogrampoolsize 16000000cvms <new cv>acc 0 manualrestart tm -unsafe 200

Saving target monitor configuration to survive board/node restart

RNC10> tm –save

$ tm -save$

Removing target monitor configuration file

RNC10> tm -rm


$ tm -rm$

More info about the tm commands: 1553-CXC1326054 and online help:

RNC10> tm

$ tm

*********************************************************************************************!Usage: tm <option> [parameter list] !*********************************************************************************************!option parameter list description !********************************************************************************************* -abs <handle> Set absolute time timestamp for all logs attached to this monitor. -attach <handle> <linkhandler1> [...linkhandlerN] Attach a list of linkhandlers to this monitor, N <= 200. -channel Print current channel type. -close <handle1> [.. handleN] Close the specified monitor(s) N <= 10. -detach <linkhandler1> [...linkhandlerN] Detach the list of linkhandlers from their respective monitors. -disconnect Disconnects everything. -mode {load | trace} Modifies the priority of all monitors to favour traffic load (low monitor priority) or traces (high monitor priority). -pm {on | off | list} Start/stop/display PM-counters. -rel <handle> Set relative time timestamp for all logs attached to this monitor. -source <handle> Set source time timestamp for all logs attached to this monitor. -rm Delete a stored configuration -save Save the current monitor configuration. -status Print current configuration. -tcp -win <X> Select TCP-mode; sub-option -win is used to specify how many TCP-monitors should be opened.


X <= 10. -udp <IP-address> Select UDP-mode, the IP-address to specify is typically your workstation IP-address.

-unsafe <No of connections, N> Set no. of connections (50 < N <= 200) depending on pool-size -setpar <parameter> <value> Set a configuration parameter -getpar Get the values of all parameters -disk {activate | ls | rm | rotate } Select different disk operations. -filter {on | off} <linkhandler1> [...linkhandlerN] Activate/deactivate trace filtering for a specific log.$

Monitoring to background (useful in script)

RNC10> l $moncommand > /path/to/logfile &

$background_pid = 1234

RNC10> wait 120

RNC10> l kill –9 $background_pid

If monitor is hanging try to restart the target monitor program on the node:

RNC10> progkill 6054

8.9.2 UDP Mode

- a dispatcher or router program collects the traces from all boards on UDP port 33078/33079 and forwards to the monitor clients- several clients can monitor the same processors simultaneously- UDP port 33078 is used for monitoring via the TargetMonitor function in central MP- UDP port 33079 is used for monitoring via the HiCap function in GigabitEthernet interface- HiCap is only available in LTE ENodeB and is used for monitoring baseband traces which require higher speed transfer capability


CPP Node

Central MP

Target Monitor Server Program

Workstation

TargetMonitor Client

Dispatcher/ Router


.

.

.

.

UDP: 33078

Processor 1

Processor 2

Processor 3

Processor 4

Processor 5

Processor 6


Gigabit Ethernet

UDP: 33079

ENodeB Baseband Processors (ULMA/GCPU)

HiCap

Setting up monitor sessions in UDP mode is currently not supported in moshell.

Refer to instruction on http://utran01.epa.ericsson.se/flowfox/lteman.html and http://utran01.epa.ericsson.se/flowfox/lteobservability.html Finn Magnusson 2011-07-10 rev PA36 417/527)

http://utran01.epa.ericsson.se/flowfox/lteobservability.html

http://utran01.epa.ericsson.se/flowfox/lteman.html

8.10 File handling commands

Navigating through the directories on the node

RNC11> cd /d/configuration/cv

$ cd /d/configuration/cv$

RNC11> pwd

$ pwd/d/configuration/cv/$

RNC11> cd ../../loadmodules

$ cd ../../loadmodules$

RNC11> pwd

$ pwd/d/loadmodules/$

Copy files, rename files

Same commands as in unix: cp, mv

MGW1> ? cp

$ ? cpNAME cp - copy files. If multiple names are given, the last name must be a directory. Option -R means recursive.

SYNOPSIS cp [-R] <source> ... <destination>

$


MGW1> ? mv

$ ? mvNAME mv - rename/move files

SYNOPSIS mv <source> ... <destination>$

Listing of a directory on the node, one level at a time

MGW3> ls -l /c/logfiles

$ ls -l /c/logfilesDirectory '/c/logfiles'drwxrwxrwx 0 512 1 Jan 1970 00:58:41 systemlog/drwxrwxrwx 0 512 1 Jan 1970 01:39:37 logattributes/drwxrwxrwx 0 512 1 Jan 1970 01:39:37 cello/$

Recursive listing of a directory on the node

MGW1> h ftree

*******************************************************ftree[f] [<lnh>/][<directory>] [| <unix-command>]*******************************************************Recursive listing of a directory on the node's file system (equivalent to “find <dir> -ls” in unix).

MGW1> ftree /c/logfiles

/c/logfiles/

drwxrwxrwx 512 1 Jan 1970 01:37:05 /c/logfiles/availability/-rw-rw-rw- 1294489 25 Mar 2009 12:05:55 /c/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml

drwxrwxrwx 512 12 Mar 2009 12:05:16 /c/logfiles/alarm_event/-rw-rw-rw- 342934 25 Mar 2009 13:23:59 /c/logfiles/alarm_event/ALARM_LOG.xml-rw-rw-rw- 3365 12 Mar 2009 12:06:10 /c/logfiles/alarm_event/EVENT_LOG.xml


drwxrwxrwx 512 1 Jan 1970 01:36:59 /c/logfiles/security/-rw-rw-rw- 102370 25 Mar 2009 14:05:54 /c/logfiles/security/CELLO_SECURITYEVENT_LOG.xml

drwxrwxrwx 1024 24 Mar 2009 08:48:34 /c/logfiles/audit_trail/-rw-rw-rw- 3145695 13 Sep 2007 10:36:47 /c/logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml-rw-rw-rw- 966251 16 Oct 2008 11:52:27 /c/logfiles/audit_trail/AUDIT_TRAIL_LOG.xml-rw-rw-rw- 307345 24 Mar 2009 08:47:19 /c/logfiles/audit_trail/T821137428_SHELL_AUDITTRAIL_LOG_20090324T084719.push-rw-rw-rw- 136174 25 Mar 2009 14:05:55 /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml-rw-rw-rw- 307481 11 Mar 2009 22:12:15 /c/logfiles/audit_trail/T821137428_CORBA_AUDITTRAIL_LOG_20090311T221216.push-rw-rw-rw- 174120 24 Mar 2009 22:11:49 /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml

drwxrwxrwx 512 1 Jan 1970 00:47:01 /c/logfiles/systemlog/-rw-rw-rw- 292801 12 Mar 2009 12:05:09 /c/logfiles/systemlog/00000syslog

Show only the files and not the directories:

MGW1> ftreef /c/logfiles

-rw-rw-rw- 1294489 25 Mar 2009 12:05:55 /c/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml-rw-rw-rw- 342934 25 Mar 2009 13:23:59 /c/logfiles/alarm_event/ALARM_LOG.xml-rw-rw-rw- 3365 12 Mar 2009 12:06:10 /c/logfiles/alarm_event/EVENT_LOG.xml-rw-rw-rw- 102370 25 Mar 2009 14:06:07 /c/logfiles/security/CELLO_SECURITYEVENT_LOG.xml-rw-rw-rw- 3145695 13 Sep 2007 10:36:47 /c/logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml-rw-rw-rw- 966251 16 Oct 2008 11:52:27 /c/logfiles/audit_trail/AUDIT_TRAIL_LOG.xml-rw-rw-rw- 307345 24 Mar 2009 08:47:19 /c/logfiles/audit_trail/T821137428_SHELL_AUDITTRAIL_LOG_20090324T084719.push-rw-rw-rw- 141963 25 Mar 2009 14:06:09 /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml-rw-rw-rw- 307481 11 Mar 2009 22:12:15 /c/logfiles/audit_trail/T821137428_CORBA_AUDITTRAIL_LOG_20090311T221216.push-rw-rw-rw- 174120 24 Mar 2009 22:11:49 /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml-rw-rw-rw- 292801 12 Mar 2009 12:05:09 /c/logfiles/systemlog/00000syslog

Show files in order of file size:

MGW1> ftreef /c/logfiles | sort -nk 2

-rw-rw-rw- 3365 12 Mar 2009 12:06:10 /c/logfiles/alarm_event/EVENT_LOG.xml-rw-rw-rw- 102370 25 Mar 2009 14:06:55 /c/logfiles/security/CELLO_SECURITYEVENT_LOG.xml-rw-rw-rw- 151633 25 Mar 2009 14:06:57 /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml-rw-rw-rw- 174120 24 Mar 2009 22:11:49 /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml-rw-rw-rw- 292801 12 Mar 2009 12:05:09 /c/logfiles/systemlog/00000syslog-rw-rw-rw- 307345 24 Mar 2009 08:47:19 /c/logfiles/audit_trail/T821137428_SHELL_AUDITTRAIL_LOG_20090324T084719.push-rw-rw-rw- 307481 11 Mar 2009 22:12:15 /c/logfiles/audit_trail/T821137428_CORBA_AUDITTRAIL_LOG_20090311T221216.push-rw-rw-rw- 342934 25 Mar 2009 13:23:59 /c/logfiles/alarm_event/ALARM_LOG.xml


-rw-rw-rw- 966251 16 Oct 2008 11:52:27 /c/logfiles/audit_trail/AUDIT_TRAIL_LOG.xml-rw-rw-rw- 1294489 25 Mar 2009 12:05:55 /c/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml-rw-rw-rw- 3145695 13 Sep 2007 10:36:47 /c/logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml

Show files stored in a folder on a different board:

MGW1> ftree 000400/f

000400!/f/-rw-rw-rw- 116 14 Sep 2007 13:22:11 000400!/f/tu_flash_information-rw-rw-rw- 78756 23 Jan 2007 12:45:55 000400!/f/tu_fpga_loadmodule

drwxrwxrwx 512 1 Jan 1970 00:25:45 000400!/f/fpga_load_files/

Recursive listing of a directory on the workstation

RNC11> ftree moshell/examples/

find moshell/examples -ls | LANG=C LC_ALL=C /home/eanzmagn/moshell/gawk -v what= '{if (what~/f/&&$3~/^d/) next;printf("%-10s %-14s %10s %-3s %-2s %-5s %s\n",$3,$5,($3~/^d/?"-":$7),$8,$9,$10,$11)}'

drwxr-xr-x eanzmagn - May 7 2007 moshell/examplesdrwxr-xr-x eanzmagn - Jan 14 12:30 moshell/examples/audit_files-rwxr-xr-x eanzmagn 57125 Jul 17 2003 moshell/examples/audit_files/CDR_celldata.txt-rwxr-xr-x eanzmagn 259072 Jan 9 2006 moshell/examples/audit_files/CDR_ExcelFormat.xls-rwxr-xr-x eanzmagn 13695 Jul 17 2003 moshell/examples/audit_files/CDR_utranrelations.txt-rwxr-xr-x eanzmagn 61440 Feb 20 11:06 moshell/examples/audit_files/EAB_FJW-08_0071.docdrwxr-xr-x eanzmagn - May 7 2007 moshell/examples/mobatch_files-rwxr-xr-x eanzmagn 1278 Oct 16 2003 moshell/examples/mobatch_files/commandfile-rwxr-xr-x eanzmagn 45685 Jan 14 21:58 moshell/examples/mobatch_files/ipdatabase-rwxr-xr-x eanzmagn 802 May 7 2007 moshell/examples/mobatch_files/sitefiledrwxr-xr-x eanzmagn - May 7 2007 moshell/examples/netcheck_swup_cvmsdrwxr-xr-x eanzmagn - May 7 2007 moshell/examples/netcheck_swup_cvms/cvms_file-rwxr-xr-x eanzmagn 372 Jun 11 2003 moshell/examples/netcheck_swup_cvms/cvms_file/swversions

Delete files and directories

rm <file> ---> to remove a single file

rmdir <directory> ---> to remove an empty folder


rm -R <directory> ---> to remove a folder and its contents

fclean <directory> ---> to remove the contents of a folder

fclean -f <file-filter> <directory> ---> to remove files in a folder

Example:

>> fclean /c/pmd --> remove all files in the folder /c/pmd

>> fclean 000400/f --> remove all files in the folder /f on board 000400

>> fclean /c/tmp -f cmd --> remove all files in the folder /c/tmp whose name match the string “cmd”

MGW1> h fclean

OFFLINE> h fclean

*******************************************************fclean[f|ff|a|d|e] [<lnh>/][<directory>] [-f <filename-filter>]*******************************************************Removal of obsolete loadmodules OR recursive removal of a directory on the node....<cut>..

MGW1> ? rm

$ ? rmNAME rm - remove files

SYNOPSIS rm [-fiRr] <filename> ...

MGW1> ? rmdir

$ ? rmdirNAME rmdir - remove (empty) directories

SYNOPSIS rmdir [-f] <directory> ...

$Finn Magnusson 2011-07-10 rev PA36 422/527)

File transfer with ftp/sftp

RNC11> uv secure_ftp

secure_ftp = 0

RNC11> h ftget

*******************************************************ftget[c]/ftput[c]/ftdel [<options>] <source> [<destination>]*******************************************************Transfer files or directories to/from the node, using ftp or sftp.

...<cut>....

Download the whole folder

RNC11> ftget /c/logfiles

...get /c/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml ./logfiles/availability/CELLO_AVAILABILITY2_LOG.xml ... OKget /c/logfiles/alarm_event/ALARM_LOG.xml ./logfiles/alarm_event/ALARM_LOG.xml ... OKget /c/logfiles/alarm_event/EVENT_LOG.xml ./logfiles/alarm_event/EVENT_LOG.xml ... OKget /c/logfiles/hw_inventory/CELLO_HWINVENTORY_LOG.xml ./logfiles/hw_inventory/CELLO_HWINVENTORY_LOG.xml ... OKget /c/logfiles/security/CELLO_SECURITYEVENT_LOG.xml ./logfiles/security/CELLO_SECURITYEVENT_LOG.xml ... OKget /c/logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml ./logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml ... OKget /c/logfiles/audit_trail/AUDIT_TRAIL_LOG.xml ./logfiles/audit_trail/AUDIT_TRAIL_LOG.xml ... OKget /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml ./logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml ... OKget /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml ./logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml ... OKget /c/logfiles/systemlog/00000syslog ./logfiles/systemlog/00000syslog ... OKget /c/logfiles/systemlog/00001syslog ./logfiles/systemlog/00001syslog ... OK

Download only the files whose name match a specific stringRNC11> ftget -f AUDIT /c/logfiles

...get /c/logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml ./logfiles/audit_trail/CELLO_AUDITTRAIL_LOG.xml ... OKget /c/logfiles/audit_trail/AUDIT_TRAIL_LOG.xml ./logfiles/audit_trail/AUDIT_TRAIL_LOG.xml ... OKget /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml ./logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml ... OKget /c/logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml ./logfiles/audit_trail/CORBA_AUDITTRAIL_LOG.xml ... OK


Conditional download, existing files will not be overwritten

RNC11> ftgetc - f AUDIT /c/ logf i l es

...RNC11>

Fetch files modified in the past 3 hours:

RNC11> ftget -m 3h /c/logfiles

Startdate=20081104.115542, Enddate=20081105.145542...get /c/logfiles/security/CELLO_SECURITYEVENT_LOG.xml ./logfiles/security/CELLO_SECURITYEVENT_LOG.xml ... OKget /c/logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml ./logfiles/audit_trail/SHELL_AUDITTRAIL_LOG.xml ... OKRNC11>

Delete files in /c/tmp older than 1 day:

RNC11> ftdel -m 9999 -p 9998 /c/tmp

Delete files in /p001200/pm_data older than 7 days and whose name matches “lnk”:

RNC11> ftdel -m 9999 -p 9992 -f lnk /p001200/pm_data

File download with http.

htget <remotefile> [<localfile/localdir>] Examples: >> htget /cello/oe/xml/rnc_node_mim.xml >> htget 10.1.128.17/cello/oe/xml/rnc_node_mim.xml >> htget http:// 10.1.128.17/cello/oe/xml/rnc_node_mim.xml

Direct editing of a text file on the node. The editor that will be used is dependent on the setting of user variable editor

RNC11> edit <remotefile>

RNC11> uv editor

editor=nedit


8.11 Summary of COLI wrapper commands

Coli command Moshell wrapper commandlhsh lhte ftetm monls ftreerm fcleanpm_pginfo proglist [-e]pm_kill progkill

8.12 Running unix commands from moshell prompt

Any unix command can be run from the moshell prompt by putting “l” or “!” at the beggining of the line.In the example below we see the difference between commands which are run towards the node (e.g. “ls”) and commands which are run towards the workstation (e.g. “! ls”) .

Running commands on unix (using l or ! ):

RNC11> l pwd

/home/eanzmagn

RNC11> l cd moshell_logfiles/

New directory: /home/eanzmagn/moshell_logfiles

RNC11> l pwd

/home/eanzmagn/moshell_logfiles

RNC11> ! ls

rbs119.log rbs17.log rbs213.log rbs24.log rbs40.log rbs44.log rbs54.log rbs67.log rbs88.log rbs99.logrbs120.log rbs20.log rbs216.log rbs25.log rbs41.log rbs45.log rbs59.log rbs68.log rbs89.logrbs121.log rbs211.log rbs218.log rbs3.log rbs42.log rbs46.log rbs6.log rbs77.log rbs91.logrbs123.log rbs212.log rbs239.log rbs30.log rbs43.log rbs51.log rbs62.log rbs86.log rbs94.log


RNC11> l ls

rbs119.log rbs17.log rbs213.log rbs24.log rbs40.log rbs44.log rbs54.log rbs67.log rbs88.log rbs99.logrbs120.log rbs20.log rbs216.log rbs25.log rbs41.log rbs45.log rbs59.log rbs68.log rbs89.logrbs121.log rbs211.log rbs218.log rbs3.log rbs42.log rbs46.log rbs6.log rbs77.log rbs91.logrbs123.log rbs212.log rbs239.log rbs30.log rbs43.log rbs51.log rbs62.log rbs86.log rbs94.log

Running commands on node:

RNC11> pwd

$ pwd/d$

RNC11> ls

$ lsDirectory '/d/'configuration/loadmodules/cv.ptrrollbacklst.bakrollback.inirollback.lstcv.bakrollback.cnt$

RNC11> cd /d/configuration

$ cd /d/configuration

RNC11> ls

$ lsDirectory '/d/configuration/'lh/cs_equipmentcmd2.cfgdefaultroutercv/CM_CONFIGlastcreatedcv.ptr


$

9 SW MANAGEMENT COMMANDS

9.1 Configuration Version Handling

The configuration data is kept in a SQL database in the RAM memory. It can be backed up and reloaded to/from a db.dat file on the harddisk. This is called a CV and consists of several files but the main one is the db.dat file.

Central MP

RAM memory Hard disk

CV backup (db.dat file)

cvmk SQL tables:

modata_r2 cspiuresource_01 cspgmresource_01 etc...

Node restart

9.1.1 CV files and folders

/d/configuration/cv contains all the configuration versions. For safety reasons it is replicated between the two Core MPs. Each CV is kept in a separate folder.


RNC1> ftree /d/configuration/cv

drwxrwxrwx 3072 23 Aug 2005 04:59:54 /d/configuration/cv/

drwxrwxrwx 512 15 Jun 2005 06:39:00 /d/configuration/cv/P3GA_CN5_final_3/-r--r--r-- 1246 15 Jun 2005 06:38:49 /d/configuration/cv/P3GA_CN5_final_3/activityLog.gz-r--r--r-- 17985 15 Jun 2005 06:38:50 /d/configuration/cv/P3GA_CN5_final_3/ARMAMENT-r--r--r-- 39 15 Jun 2005 06:38:51 /d/configuration/cv/P3GA_CN5_final_3/LLP.LMID-r--r--r-- 84 15 Jun 2005 06:38:51 /d/configuration/cv/P3GA_CN5_final_3/attribute-rw-rw-rw- 1131272 15 Jun 2005 06:38:56 /d/configuration/cv/P3GA_CN5_final_3/db.dat-r--r--r-- 167 15 Jun 2005 06:38:59 /d/configuration/cv/P3GA_CN5_final_3/md5checksums-r--r--r-- 3 15 Jun 2005 06:39:00 /d/configuration/cv/P3GA_CN5_final_3/ok

drwxrwxrwx 512 7 Jun 2005 23:53:16 /d/configuration/cv/Ranap_cs_ps_cleaned/-r--r--r-- 817 7 Jun 2005 23:53:04 /d/configuration/cv/Ranap_cs_ps_cleaned/activityLog.gz-r--r--r-- 17979 7 Jun 2005 23:53:04 /d/configuration/cv/Ranap_cs_ps_cleaned/ARMAMENT-r--r--r-- 39 7 Jun 2005 23:53:05 /d/configuration/cv/Ranap_cs_ps_cleaned/LLP.LMID-r--r--r-- 81 7 Jun 2005 23:53:06 /d/configuration/cv/Ranap_cs_ps_cleaned/attribute-rw-rw-rw- 1164031 7 Jun 2005 23:53:11 /d/configuration/cv/Ranap_cs_ps_cleaned/db.dat-r--r--r-- 167 7 Jun 2005 23:53:15 /d/configuration/cv/Ranap_cs_ps_cleaned/md5checksums-r--r--r-- 3 7 Jun 2005 23:53:16 /d/configuration/cv/Ranap_cs_ps_cleaned/ok

9.1.2 CV status


Current configuration

Was loaded at last node restart

Will be loaded at next node restart

acc 0 manualrestart

Loaded CV Executing CV Startable CV

cvmk cvset

9.1.3 CV handling

All CV handling can be done with the ConfigurationVersion MO:

RNC10> get configurationversion=1

=================================================================================================================1 SwManagement=1,ConfigurationVersion=1=================================================================================================================ConfigurationVersionId 1autoCreatedCVIsTurnedOn falsecommandlogStatus truecurrentLoadedConfigurationVersion Rnc_final currentUpgradePackage UpgradePackage=CXP9012014_R4J07executingCv Rnc_finallastCreatedCv Rnc_finalrollbackInitCounterValue 5rollbackInitTimerValue 30rollbackList s[2] = Exercise_2 RADIO_NETWORK_40_RBS_IOV rollbackOn falsestartableConfigurationVersion Rnc_final storedConfigurationVersions t[2] = >>> Struct[1] has 8 members:


>>> 1.name = Rnc_final >>> 2.identity = Rnc_final >>> 3.type = other >>> 4.upgradePackageId = CXP9012014_R4J07 >>> 5.operatorName = unknown >>> 6.operatorComment = none >>> 7.date = Tue May 2 20:44:53 2006 >>> 8.status = CELLO_CV_OK >>> Struct[2] has 8 members: >>> 1.name = Fi_CXP9012014_R4J07_060119_0724 >>> 2.identity = no value (cv product id) >>> 3.type = other >>> 4.upgradePackageId = CXP9012014_R4J07 >>> 5.operatorName = Cello Packet Platform >>> 6.operatorComment = Final CV autocreated at System Upgrade. >>> 7.date = Thu Jan 19 07:24:43 2006 >>> 8.status = CELLO_CV_OKtimeForAutoCreatedCV 04:00userLabel =================================================================================================================Total: 1 MOs

RNC10> acl configura

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2052 ConfigurationVersion=1 cancelRestore 0 2052 ConfigurationVersion=1 changeRestoreConfirmationDeadline 1 2052 ConfigurationVersion=1 confirmRestore 0 2052 ConfigurationVersion=1 create 5 2052 ConfigurationVersion=1 delete 1 2052 ConfigurationVersion=1 forcedRestore 2 2052 ConfigurationVersion=1 getFromFtpServer 4 2052 ConfigurationVersion=1 putToFtpServer 6 2052 ConfigurationVersion=1 removeFromRollbackList 1 2052 ConfigurationVersion=1 restore 2 2052 ConfigurationVersion=1 setFirstRollbackList 1 2052 ConfigurationVersion=1 setStartable 1 2052 ConfigurationVersion=1 verifyRestore 1=================================================================================================================


The moshell “cv” commands can be used to perform CV operations

RNC10> h cvls

*******************************************************cvls/cvmk/cvms/cvset/cvrm/cvcu/cvget/cvput*******************************************************Command syntax: * cvls [<cv-filter>] * cvcu * cvrm <cv-name>|<cv-filter> * cvms <cvname> [<operator>] [<comment>] * cvmk <cvName> [<operator>] [<comment>] * cvset <cvname>etc...

Overview of active CVs as well as full CV list

RNC11> cvcu

===================================================================================================================090709-08:47 CV Name Upgrade Package Release===================================================================================================================Startable: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Loaded: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Executing: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Last created: RNC11_P7 CXP9012995_R6CF/13 P7.0.1-7 (7.0.1.3 EP12)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9012842_R3BE%6 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)AutoCreatedCV: DisabledRollback status: Rollback is onRollback init timer: 2880Rollback init counter: 2Rollback counter: 2Rollback list: s[3] = RNC11_P6 Rb_CXP9012123_R10H%12_090528_1204 RNC11_OK5 ===================================================================================================================

RNC11> cvls


===================================================================================================================090709-08:47 CV Name Upgrade Package Release===================================================================================================================Startable: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Loaded: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Executing: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Last created: RNC11_P7 CXP9012995_R6CF/13 P7.0.1-7 (7.0.1.3 EP12)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9012842_R3BE%6 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)AutoCreatedCV: DisabledRollback status: Rollback is onRollback init timer: 2880Rollback init counter: 2Rollback counter: 2Rollback list: s[3] = RNC11_P6 Rb_CXP9012123_R10H%12_090528_1204 RNC11_OK5 ===================================================================================================================UP name ProductData CVs LMs PrDate LastCV state Release CompatIndex ===================================================================================================================CXP9012014_R10CJ%A CXP9012014_R10CJ/A 3 226 090116 090528 IDLE, UPGRADE_COMPLETED P5.0.26-6 (5.1.2.39 EP17) RNC_P5_AUE4_U5CXP9012123_R10H/19 CXP9012123_R10H/19 5 272 090407 090615 IDLE, UPGRADE_COMPLETED P6.0.2-25 (EP12-6.0.2.9) RncMOM_AN1 CXP9012842_R3BE%6 CXP9012842_R3BE/6 4 303 090513 090617 IDLE, UPGRADE_COMPLETED P6.1.4-9 (EP10-CPP6.1.0.16) RncMOM_AU Virtual_0_of_CXP9012995_R6CF/13 CXP9012995_R6CF/13 3 0 090506 090617 IDLE, ONLY_DELETEABLE P7.0.1-7 (7.0.1.3 EP12) ==================================================================================================================================CV Name Creation Date Package/Release Type Operator Comment==================================================================================================================================Fi_CXP9012014_R10CJ%A_090209_1625 2009-02-09 16:25 CXP9012014_R10CJ/A P5.0.26-6 other CPP Final CV autocreated at SURNC11_OK5 2009-02-09 16:30 CXP9012014_R10CJ/A P5.0.26-6 other eanzmagn noneRb_CXP9012123_R10H%12_090528_1204 2009-05-28 12:04 CXP9012014_R10CJ/A P5.0.26-6 other CPP Rollb. CV autocreated at SUFi_CXP9012123_R10H%19_090613_0940 2009-06-13 09:40 CXP9012123_R10H/19 P6.0.2-25 other CPP Final CV autocreated at SURNC11_P6 2009-06-15 09:08 CXP9012123_R10H/19 P6.0.2-25 other eanzmagn noneSi_CXP9012014_R10CJ%A_090615_1648 2009-06-15 16:48 CXP9012123_R10H/19 P6.0.2-25 other CPP Install_tmp CV autocreated by SUFi_CXP9012123_R10H%19_090615_1707 2009-06-15 17:07 CXP9012123_R10H/19 P6.0.2-25 other CPP Final CV autocreated at SURb_CXP9012842_R3BE%6_090615_1926 2009-06-15 19:26 CXP9012123_R10H/19 P6.0.2-25 other CPP Rollb. CV autocreated at SUSU_CXP9012842_R3BE%6_090615_1939 2009-06-15 19:39 CXP9012842_R3BE/6 P6.1.4-9 upgr_tol CPP Temp. CV autocreated at SUFi_CXP9012842_R3BE%6_090615_1950 2009-06-15 19:50 CXP9012842_R3BE/6 P6.1.4-9 other CPP Final CV autocreated at SURNC11_P6.1 2009-06-15 19:52 CXP9012842_R3BE/6 P6.1.4-9 other eanzmagn noneRb_CXP9012995_R6CF%13_090617_0609 2009-06-17 06:10 CXP9012842_R3BE/6 P6.1.4-9 other CPP Rollb. CV autocreated at SUSU_CXP9012995_R6CF%13_090617_0630 2009-06-17 06:30 CXP9012995_R6CF/13 P7.0.1-7 upgr_tol CPP Temp. CV autocreated at SUFi_CXP9012995_R6CF%13_090617_0642 2009-06-17 06:43 CXP9012995_R6CF/13 P7.0.1-7 other CPP Final CV autocreated at SU


RNC11_P7 2009-06-17 12:42 CXP9012995_R6CF/13 P7.0.1-7 other eanzmagn none==================================================================================================================================>>> Total: 15 CV's, 4 UP's

Filter the CV list

RNC11> cvls p6.1

===================================================================================================================090709-08:47 CV Name Upgrade Package Release===================================================================================================================Startable: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Loaded: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Executing: RNC11_P6.1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Last created: RNC11_P7 CXP9012995_R6CF/13 P7.0.1-7 (7.0.1.3 EP12)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9012842_R3BE%6 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)AutoCreatedCV: DisabledRollback status: Rollback is onRollback init timer: 2880Rollback init counter: 2Rollback counter: 2Rollback list: s[3] = RNC11_P6 Rb_CXP9012123_R10H%12_090528_1204 RNC11_OK5 ===================================================================================================================UP name ProductData CVs LMs PrDate LastCV state Release CompatIndex ===================================================================================================================CXP9012842_R3BE%6 CXP9012842_R3BE/6 4 303 090513 090617 IDLE, UPGRADE_COMPLETED P6.1.4-9 (EP10-CPP6.1.0.16) RncMOM_AU ==================================================================================================================================CV Name Creation Date Package/Release Type Operator Comment==================================================================================================================================SU_CXP9012842_R3BE%6_090615_1939 2009-06-15 19:39 CXP9012842_R3BE/6 P6.1.4-9 upgr_tol CPP Temp. CV autocreated at SUFi_CXP9012842_R3BE%6_090615_1950 2009-06-15 19:50 CXP9012842_R3BE/6 P6.1.4-9 other CPP Final CV autocreated at SURNC11_P6.1 2009-06-15 19:52 CXP9012842_R3BE/6 P6.1.4-9 other eanzmagn noneRb_CXP9012995_R6CF%13_090617_0609 2009-06-17 06:10 CXP9012842_R3BE/6 P6.1.4-9 other CPP Rollb. CV autocreated at SU==================================================================================================================================>>> Total: 4 CV's, 1 UP's


Make a CV

RNC11> cvmk test eanzmagn this is a test

(---> calls the action “ConfigurationVersion:create”)

RNC11> acc 1 create

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 1 ConfigurationVersion=1 create 5

Parameter 1 of 5, configurationVersionName (string): test

Parameter 2 of 5, identity (string): test

Parameter 3 of 5, type (enumRef-ConfigurationVersionType): Enter one of the following integers: 0:STANDARD, 1:UPGRADE, 2:MINIMAL, 3:TEST, 4:AUTOCREATE, 5:OTHER, 6:UPGRADE_TOLERATE_ERROR, 7:DOWNLOADED, 8:RESTORED: 5

Parameter 4 of 5, operatorName (string): eanzmagn

Parameter 5 of 5, comment (string): this is a test >>> Return value = null


The new CV becomes “Executing” and “Last created”

RNC11> cvcu

===================================================================================================================090325-16:06 CV Name Upgrade Package Release===================================================================================================================Startable: RNC11_OK5 CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)Loaded: RNC11_OK5 CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)Executing: test CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)Last created: test CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9012014_R10CJ%A CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)AutoCreatedCV: DisabledRollback status: Rollback is onRollback init timer: 30


Rollback init counter: 5Rollback counter: 5Rollback list: s[2] = Rb_CXP9012014_R10CJ%A_090209_1611 RNC11_OK4 ===================================================================================================================

Set the CV as startable

RNC11> cvset test

(---> calls the action “ConfigurationVersion:setStartable”)

RNC11> acc 1 setstartable

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 1 ConfigurationVersion=1 setStartable 1

Parameter 1 of 1, configurationVersionName (string): test >>> Return value = null


The CV becomes startable

RNC11> cvcu

===================================================================================================================090325-16:06 CV Name Upgrade Package Release===================================================================================================================Startable: test CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)Loaded: RNC11_OK5 CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)Executing: test CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)Last created: test CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9012014_R10CJ%A CXP9012014_R10CJ/A P5.0.26-6 (5.1.2.39 EP17)AutoCreatedCV: DisabledRollback status: Rollback is onRollback init timer: 30Rollback init counter: 5Rollback counter: 5Rollback list: s[2] = Rb_CXP9012014_R10CJ%A_090209_1611 RNC11_OK4


===================================================================================================================

Note: cvmk and cvset can also be done in one operation with the cvms command

RNC10> cvms test1 eanzmagn this is test1

(---> does cvmk followed by cvset)

Restart the node


The startable CV becomes “Loaded”

RNC10> cvcu

=======================================================================================================060709-23:49 CV Name Upgrade Package=======================================================================================================Startable: test1 CXP9012014_R4J07Loaded: test1 CXP9012014_R4J07Executing: test1 CXP9012014_R4J07Last created: test1 CXP9012014_R4J07-------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9012014_R4J07 CXP9012014_R4J07CommandLog: EnabledAutoCreatedCV: DisabledRollback status: Rollback is offRollback init timer: 30Rollback init counter: 5=======================================================================================================

Remove CVs, pattern matching can be used to remove several CVs at once.The CVs are also removed from the rollback list at the same time.

RNC10> cvrm tes


Delete following 3 CV's?==========================================================================================================test1 2006-07-09 21:49 CXP9012014_R4J07 eanzmagn this is test1db_test 2006-06-26 08:13 CXP9012014_R4J07 unknown nonetest 2006-07-09 21:48 CXP9012014_R4J07 eanzmagn this is a test==========================================================================================================!!!! WARNING: Delete 3 CV's?Are you Sure [y/n] ? y

(---> calls action Configuration:delete)

RNC10> # Deleting cv 1 of 3: test1

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 787 ConfigurationVersion=1 delete 1

Parameter 1 of 1, configurationVersionName (string): test1 >>> Return value = null


RNC10> # Deleting cv 2 of 3: db_test


Parameter 1 of 1, configurationVersionName (string): db_test >>> Return value = null


RNC10> # Deleting cv 3 of 3: test


Parameter 1 of 1, configurationVersionName (string): test >>> Return value = null



Remote CV backup to the workstation where moshell is running

RNC11> cvget RNC_P6.1_OK

Download the following 1 CV's to /home/eanzmagn/moshell_logfiles/logs_moshell/cv/RNC11/091026_012936?==========================================================================================================RNC_P6.1_OK 2009-09-25 19:52 CXP9012842_R3BE/6 eanzmagn params aligned to recommended values==========================================================================================================Are you Sure [y/n] ? y

Downloading CV 1 of 1: RNC_P6.1_OK

facc configurationversion=1 putToFtpServer RNC_P6.1_OK /d/usr RNC11_RNC_P6.1_OK.zip 127.0.0.1 moshelluser $password

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 581 ConfigurationVersion=1 putToFtpServer 6 >>> Return value = 2940061


Waiting 20 seconds before starting to poll...ConfigurationVersion=1 ElapsedTime currentMainActivity currentDetailedActivityConfigurationVersion=1 0s EXPORTING_BACKUP_CV TRANSFERING_BACKUP_TO_REMOTE_SERVERConfigurationVersion=1 10s EXPORTING_BACKUP_CV TRANSFERING_BACKUP_TO_REMOTE_SERVERConfigurationVersion=1 20s IDLE IDLEWaiting 60 seconds before checking result...CV action result: EXECUTEDadditionalInfo : CV_BACKUP_NAME RNC11_RNC_P6.1_OK.zipGet /d/usr/RNC11_RNC_P6.1_OK.zip /home/eanzmagn/moshell_logfiles/logs_moshell/cv/RNC11/091026_012936/RNC11_RNC_P6.1_OK.zip ... OKDele /d/usr/RNC11_RNC_P6.1_OK.zip ... OKSuccessful storage of RNC_P6.1_OK to /home/eanzmagn/moshell_logfiles/logs_moshell/cv/RNC11/091026_012936/RNC11_RNC_P6.1_OK.zip


Transfer a remote CV backup from the workstation to the node

RNC11> cvput /home/eanzmagn/moshell_logfiles/logs_moshell/cv/RNC11/091026_012936/RNC11_RNC_P6.1_OK.zip

Put /home/eanzmagn/moshell_logfiles/logs_moshell/cv/RNC11/091026_012936/RNC11_RNC_P6.1_OK.zip /d/usr/RNC11_RNC_P6.1_OK.zip ... OK

facc configurationversion=1 getFromFtpServer /d/usr/RNC11_RNC_P6.1_OK.zip 127.0.0.1 moshelluser $password

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 581 ConfigurationVersion=1 getFromFtpServer 4 >>> Return value = 3604394


Waiting 20 seconds before starting to poll...ConfigurationVersion=1 ElapsedTime currentMainActivity currentDetailedActivityConfigurationVersion=1 0s IMPORTING_BACKUP_CV UNPACKING_RETREIVED_BACKUPConfigurationVersion=1 10s IDLE IDLEWaiting 60 seconds before checking result...CV action result: EXECUTEDadditionalInfo : Dele /d/usr/RNC11_RNC_P6.1_OK.zip ... OKThe CV RNC_P6.1_OK was successfully transferred.

The CV is now stored again on the node and appears with the type “downloaded”. It means we cannot set this CV as startable and restart the node on it. To load this type of CV on the node, we must use the action “restore”

RNC11> cvls RNC_P6.1_OK

=================================================================================================================================CV Name Creation Date UpgradePackage Release Type Operator Comment=================================================================================================================================RNC_P6.1_OK 2009-09-25 19:52 CXP9012842_R3BE/6 P6.1.4-9 downlod eanzmagn params al igned to recommended values=================================================================================================================================


>>> Total: 1 CV's, 0 UP's

Restore a CV (note: confirmRestore is done automatically by “polc”)

RNC11> acc config forcedRestore

Call Action restore on following MOs ?=================================================================================== 1 SwManagement=1,ConfigurationVersion=1===================================================================================Are you Sure [y/n] ? y

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 1 ConfigurationVersion=1 forcedRestore 2

Parameter 1 of 2, cvName (string): RNC_P6.1_OK

Parameter 2 of 2, autoConfigurationInformation (enumRef-CVAutoConfigurationInformation): Enter one of the following integers: 0:OFF, 1:ON, 2:AS_CONFIGURED: 2

>>> Return value = 21032529


RNC11> polc

Waiting 20 seconds before starting to poll...ConfigurationVersion=1 ElapsedTime currentMainActivity currentDetailedActivityConfigurationVersion=1 0s RESTORING_DOWNLOADED_BACKUP_CV VERIFY_RESTORE_REQUESTEDConfigurationVersion=1 10s RESTORING_DOWNLOADED_BACKUP_CV VERIFY_RESTORE_REQUESTEDConfigurationVersion=1 20s RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_UPGRADE_PACKAGE_PRESENTConfigurationVersion=1 30s RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULESConfigurationVersion=1 40s RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULESConfigurationVersion=1 50s RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULESConfigurationVersion=1 60s (01m00s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULESConfigurationVersion=1 70s (01m10s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULESConfigurationVersion=1 80s (01m20s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULES


ConfigurationVersion=1 90s (01m30s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULESConfigurationVersion=1 101s (01m41s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULESConfigurationVersion=1 111s (01m51s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_CHECKSUM_FOR_LOAD_MODULESConfigurationVersion=1 121s (02m01s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_NETWORK_CONFIGURATION_FOR_IP_ATMConfigurat ionVers ion=1 131s (02m11s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_POSSIBLE_TO_CREATE_REQUIRED_NUMBER_OF_CVSConfigurationVersion=1 141s (02m21s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_HARDWARE_COMPATIBILITYConfigurationVersion=1 151s (02m31s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_HARDWARE_SOFTWARE_COMPATIBILITYConfigurationVersion=1 161s (02m41s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_NODE_IDENTITYConfigurationVersion=1 171s (02m51s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_APPLICATION_CONFIGURATION_DATAConfigurationVersion=1 181s (03m01s) RESTORING_DOWNLOADED_BACKUP_CV VERIFYING_APPLICATION_CONFIGURATION_DATAConfigurationVersion=1 191s (03m11s) RESTORING_DOWNLOADED_BACKUP_CV RESTORE_INITIATEDConfigurationVersion=1 201s (03m21s) RESTORING_DOWNLOADED_BACKUP_CV RESTORE_INITIATEDConfigurationVersion=1 211s (03m31s) RESTORING_DOWNLOADED_BACKUP_CV SAVING_ROLLBACK_CVConfigurationVersion=1 221s (03m41s) RESTORING_DOWNLOADED_BACKUP_CV SAVING_ROLLBACK_CVConfigurationVersion=1 231s (03m51s) RESTORING_DOWNLOADED_BACKUP_CV SAVING_ROLLBACK_CVConfigurationVersion=1 241s (04m01s) RESTORING_DOWNLOADED_BACKUP_CV SAVING_ROLLBACK_CVConfigurationVersion=1 257s (04m17s) RESTORING_DOWNLOADED_BACKUP_CV NODE_RESTART_REQUESTConfigurationVersion=1 268s (04m28s) RESTORING_DOWNLOADED_BACKUP_CV NODE_RESTART_REQUESTConfigurationVersion=1 278s (04m38s) HTTP.NO_CONTACT HTTP.NO_CONTACTConfigurationVersion=1 312s (05m12s) org.omg.CORBA.COMM_FAILURE org.omg.CORBA.TRANSIENTConfigurationVersion=1 329s (05m29s) org.omg.CORBA.TRANSIENT org.omg.CORBA.TRANSIENTConfigurationVersion=1 349s (05m49s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 360s (06m00s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 370s (06m10s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 380s (06m20s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 390s (06m30s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 400s (06m40s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 410s (06m50s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 420s (07m00s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 430s (07m10s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 441s (07m21s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 451s (07m31s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 461s (07m41s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 471s (07m51s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 481s (08m01s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 491s (08m11s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 501s (08m21s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 511s (08m31s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 521s (08m41s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 531s (08m51s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 541s (09m01s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 551s (09m11s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 561s (09m21s) org.omg.CORBA.OBJECT_NOT_EXIST org.omg.CORBA.OBJECT_NOT_EXISTConfigurationVersion=1 573s (09m33s) IDLE INITIATING_CONFIRM_RESTORE_TIME_SUPERVISIONWaiting 60 seconds before checking result...


ConfigurationVersion=1 634s (10m34s) RESTORING_DOWNLOADED_BACKUP_CV AWAITING_RESTORE_CONFIRMATION

The node has been restarted on a different CV: from RNC_P6.1_OK1 to RNC_P6.1_OK.Rereading MOM and MIB...

Checking MOM version...RNC_NODE_MODEL_J_3_45Using MOM version: RNC_NODE_MODEL_J_3_45_COMPLETEParsing MOM (cached): /home/eanzmagn/jarxml/RNC_NODE_MODEL_J_3_45_COMPLETE.xml.cache.gz ..................................................................Done.Using paramfile /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_J_1_0.txtParsing file /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_J_1_0.txt ....Done.Connected to 137.58.194.147 (ManagedElement=1)Last MO: 11059. Loaded 11059 MOs. Total: 11060 MOs.

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 2135 ConfigurationVersion=1 confirmRestore 0 >>> Return value = 22142711

=================================================================================================================Total: 1 MOs attempted, 1 MOs actionedConfigurationVersion=1 659s (10m59s) CONFIRMING_RESTORE_OF_DOWNLOADED_BACKUP_CV SAVING_FINAL_CVConfigurationVersion=1 669s (11m09s) CONFIRMING_RESTORE_OF_DOWNLOADED_BACKUP_CV SAVING_FINAL_CVConfigurationVersion=1 679s (11m19s) CONFIRMING_RESTORE_OF_DOWNLOADED_BACKUP_CV SAVING_FINAL_CVConfigurationVersion=1 689s (11m29s) IDLE IDLECV action result: EXECUTEDadditionalInfo : Connected to 137.58.194.147 (ManagedElement=1)Last MO: 11059. Loaded 11059 MOs. Total: 11060 MOs.

Print CV list: the CV has become loaded and a RF CV has been made (Rollback Final)

RNC11> cvcu

091026-02:26:18 137.58.194.147 7.1w RNC_NODE_MODEL_J_3_45_COMPLETE stopfile=/tmp/26376

===================================================================================================================091026-02:26 CV Name Upgrade Package Release===================================================================================================================


Startable: RF_CXP9012842_R3BE%6_091026_0059 CXP9012842_R3BE/6 P6.1.4- 9 (EP10- CPP6.1.0.16)Loaded: RNC_P6.1_OK CXP9012842_R3BE/6 P6.1.4- 9 (EP10- CPP6.1.0.16)Executing: RF_CXP9012842_R3BE%6_091026_0059 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Last created: RF_CXP9012842_R3BE%6_091026_0059 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9012842_R3BE%6 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)AutoCreatedCV: DisabledRollback status: Rollback is onRollback init timer: 2880Rollback init counter: 2Rollback counter: 2Rollback list: s[8] = RR_CXP9012014_R10CJ%A_091026_0050 RF_CXP9012014_R10CJ%A_091026_0025 RR_CXP9012014_R10CJ%A_091026_0022 RF_CXP9012014_R10CJ%A_091025_2355 RR_CXP9012842_R3BE%6_091025_2346 RNC_P6.1_OK1 Rb_CXP9012123_R10H%12_090528_1204 RNC11_OK5 ======================================================================================================================================

Notes:

Similar commands are also available from OSE shell in case MO service is unavailable:cv lscv mkcv setcv rmcv cuetc.Type cv help for info:$ cv helpCreate CV: cv mk <name> [id] [type] [puid] [operator] [comment]Remove CV: cv rm <name>Set as startable: cv set <name>List cv:s: cv lsCurrent usage: cv cuSet rollback init values: cv rbinit <status> <timer> <counter>- status : 0=no_change, 1=rollback_on, 2=rollback_off- timer : 0=no_change, 1-n minutes- counter : 0=no_change, 1-nSet first in rollback list: cv rbset <name>Remove from rollback list: cv rbrm <name>Set rollback counter: cv rbcnt <counter>Check if loaded cv is upgrade: cv upClean up cv dir: cv clean <level>- level : 1=remove all cvs except one used by cv pointer.- level : 2=remove all cvs except one used by cv pointer & rollback list.- level : 3=remove all cvs on passive side that does not exist on active side.Synch from active to MP with given lnh name: cv synch <lnh>


List upgrade cv: cv upls <upgrade package id>Remove upgrade cv: cv uprm <upgrade package id>Checksum cv: cv csum <name> <mode>- name: CV name to checksum files for- mode: active=active Core MP, passive=passive Core MPPrecheck cv: cv prec <number of new CVs>$

Difference between startable/loaded/executing/lastcreated:

Example:

loaded CV1startable CV1executing CV1 last created CV1

--> cvmk CV2

loaded CV1startable CV1executing CV2last created CV2

--> cvset CV2


--> acc 0 restart


The information about each CV (creation date, upgrade package, user who created the CV, etc) is read from the attribute file

RNC1> cat /d/configuration/cv/Rnc_final/attribute

$ cat /d/configuration/cv/Rnc_final/attribute


Tue May 2 20:44:53 2006Rnc_finalotherCXP9012014_R4J07unknownnone$

9.1.4 CV Rollback

If Rollback function is turned on and the node has restarted too many times (more than “Rollback init counter”) within a specific time period (given by “Rollback init timer”), it will rollback to a different CV (the first CV in the “Rollback list”).- RNC settings: the node rolls back if there 3 node restarts within 48 hours- RBS settings: the node rolls back if there are 3 node restarts within 30 minutes- MGW settings: the node rolls back if there are 6 node restarts within 30 minutes

RNC11> cvcu

===================================================================================================================100123-14:26 CV Name Upgrade Package Release===================================================================================================================Startable: RNC_P6.1_OK1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Loaded: RNC_P6.1_OK1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Executing: RNC_P6.1_OK1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)Last created: RNC_P6.1_OK1 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9012842_R3BE%6 CXP9012842_R3BE/6 P6.1.4-9 (EP10-CPP6.1.0.16)AutoCreatedCV: DisabledRollback status: Rollback is onRollback init timer: 2880Rollback init counter: 2Rollback counter: 2Rollback list: s[1] = RNC11_OK5 ===================================================================================================================

OFFLINE> mom config rollback


####################################################################################################################################MO Class Attribute Type Flags####################################################################################################################################ConfigurationVersion rollbackInitCounterValue long ------------------------------------------------------------------------------------------------------------------------------------Specifies the initial value of the rollback counter. This is used when rollback is switched on (rollbackOn = true).Range: 1 to 10000, Default=5 ************************************************************************************************************************************ConfigurationVersion rollbackInitTimerValue long ------------------------------------------------------------------------------------------------------------------------------------Specifies the time used by the system when rollback is switched on (rollbackOn = true). After the given time, the node is not in a cyclic restart mode. The rollback counter, rollbackInitCounterValue, is then reset to its initial value.Unit: 1 minRange: 1 to 10000, Default=30 ************************************************************************************************************************************ConfigurationVersion rollbackList sequence:string readOnly------------------------------------------------------------------------------------------------------------------------------------Specifies a list of configuration versions to rollback to (configuration version name).The first CV on the list is used at the next rollback. This entry is then automatically removed from the rollback list.This attribute is modified by the actions, setFirstRollbackList and removeFromRollbackList.Default="" ************************************************************************************************************************************ConfigurationVersion rollbackOn boolean ------------------------------------------------------------------------------------------------------------------------------------This flag indicates if rollback is enabled or not.If true, the system automatically sets the rollback counter. If cyclic restarts, a rollback is issued after x restarts (x is defined by the rollbackInitCounterValue).Default=true ************************************************************************************************************************************

In a cyclic restart situation it is possible to specify the CV on which the node should rollback by writing the CV name into the cv.ptr file of the active Core MP. It may be needed to login via serial port or telnet connection in case the cyclic restarts are happening very close to each other.

1. List all available CVs and find the name of a valid CV

ls -l /d/configuration/cv

2. Give the write permissions to the file /d/cv.ptr

chmod 666 /d/cv.ptr

3. Write the name of the valid CV into the file /d/cv.ptr. At the next node restart, this CV will be loaded automatically.

echo validcv > /d/cv.ptr


4. Check:

cat /d/cv.ptr

9.1.5 CV Countdown

Check the countdown time:

RNC11> get config countdown

=================================================================================================================MO Attribute Value=================================================================================================================ConfigurationVersion=1 configAdmCountdown 300ConfigurationVersion=1 configCountdownActivated falseConfigurationVersion=1 configOpCountdown 300=================================================================================================================Total: 1 MOs

Start the countdown:

RNC11> set config configCountdownActivated true

============================================================================================================ Id MO configCountdownActivated Result============================================================================================================ 1 ConfigurationVersion=1 true >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

A rollback CV is automatically created and set as startable

RNC11> cvcu


===================================================================================================================101009-16:21 CV Name Upgrade Package Release===================================================================================================================Startable: CB_CXP9013831_R9YC%6_101009_1420 CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)Loaded: RNC11_P7.1_OK_AllFeatures CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)Executing: CB_CXP9013831_R9YC%6_101009_1420 CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)Last created: CB_CXP9013831_R9YC%6_101009_1420 CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9013831_R9YC/6 CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)AutoCreatedCV: DisabledCountdown status: Activated. Remaining time before rollback: 289 secondsOngoing CV activity: 13 (CONFIG_COUNTDOWN_ONGOING)Rollback status: Rollback is onRollback init timer: 2880Rollback init counter: 2Rollback counter: 2Rollback list: s[6] = CC_CXP9013831_R9YC%6_101009_1402 CB_CXP9013831_R9YC%6_101009_1359 RNC11_P7.1_OK_AllFeatures Fi_CXP9012123_R10H%19_090615_1707 RNC11_P7 RNC_P6.1_OK1 ====================================================================================================================

Perform any required configuration changes .............

Confirm that the configuration changes have been completed successfully:

RNC11> set config configCountdownActivated false

============================================================================================================ Id MO configCountdownActivated Result============================================================================================================ 1 ConfigurationVersion=1 false >>> Set.============================================================================================================Total: 1 MOs attempted, 1 MOs set

A confirmation CV is automatically created and set as startable

RNC11> cvcu


===================================================================================================================101009-16:28 CV Name Upgrade Package Release===================================================================================================================Startable: CC_CXP9013831_R9YC%6_101009_1421 CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)Loaded: RNC11_P7.1_OK_AllFeatures CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)Executing: CC_CXP9013831_R9YC%6_101009_1421 CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)Last created: CC_CXP9013831_R9YC%6_101009_1421 CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)-------------------------------------------------------------------------------------------------------------------Current UpgradePkg: UpgradePackage=CXP9013831_R9YC/6 CXP9013831_R9YC/6 P7.1.4-4 (EP8-CPP_7.0.3.10.1)AutoCreatedCV: DisabledCountdown status: DeactivatedOngoing CV activity: 0 (IDLE)Rollback status: Rollback is onRollback init timer: 2880Rollback init counter: 2Rollback counter: 2Rollback list: s[7] = CB_CXP9013831_R9YC%6_101009_1420 CC_CXP9013831_R9YC%6_101009_1402 CB_CXP9013831_R9YC%6_101009_1359 RNC11_P7.1_OK_AllFeatures Fi_CXP9012123_R10H%19_090615_1707 RNC11_P7 RNC_P6.1_OK1 ====================================================================================================================

If the configuration changes had not been successful, the node would have automatically rolled-back to the rollback CV after the countdown time had expired.

9.2 Restart Commands

9.2.1 Printing all possible restart actions

RNC11> momd . restart

#####################################################################################################MO Class Action ReturnType Parameters#####################################################################################################ManagedElement manualRestart void 3:restartRank:restartReason:restartInfoPlugInUnit manualRestart void 3:restartRank:restartReason:restartInfoPiuDevice manualRestart void 3:restartRank:restartReason:restartInfo


Jvm restart void 0Program restart void 0Spm restart void 0Spu restart void 0Fan restartFan void 1:restartCause:enumRef-RestartCause

ENB12> momd . restart

#####################################################################################################MO Class Action ReturnType Parameters#####################################################################################################ManagedElement manualRestart void 3:restartRank:restartReason:restartInfoPlugInUnit manualRestart void 3:restartRank:restartReason:restartInfoPiuDevice manualRestart void 3:restartRank:restartReason:restartInfoJvm restart void 0Program restart void 0AntennaNearUnit restartUnit void 0AuxPlugInUnit restartUnit void 0HwUnit restartUnit void 0

RNC11> mom restartrank .

##################################################################################Enum Values##################################################################################RestartRank 0:RESTART_WARM, 1:RESTART_REFRESH, 2:RESTART_COLD, 3:RESTART_COLDWTEST---------------------------------------------------------------------------------- - RESTART_WARM: Restarts the node with the same software. The software is not reloaded from the disk. The traffic is affected least. - RESTART_REFRESH: Reloads the software from the disk, restarts the node, and resets parts of the hardware. The traffic is affected more than for a warm restart. - RESTART_COLD: Reloads the software from the disk, restarts the node, and resets all hardware. The traffic is affected more than for a refresh restart. - RESTART_COLDWTEST: Reloads the software from the disk, restarts the node, and resets and tests the hardware. The traffic is affected most.**********************************************************************************

Rank coldWithTest stores test result in following attributes:

RNC11> mom . hwtest

###########################################################################################################MO Class Attribute Type Flags


###########################################################################################################PlugInUnit hwTestResult string readOnly,noNotification-----------------------------------------------------------------------------------------------------------Contains text information from latest performed hardware tests.Default="" ***********************************************************************************************************PlugInUnit hwTestStatus enumRef:TestStatus readOnly,noNotification-----------------------------------------------------------------------------------------------------------Indicates the status of hardware tests.Default=NO_TEST_RESULTS ***********************************************************************************************************

9.2.2 Performing a node restart

With MO action (recommended way)


090909-19:53:04 137.58.194.147 7.1u RNC_NODE_MODEL_J_3_45_COMPLETE stopfile=/tmp/18080Call Action manualrestart on following MOs ?=================================================================================== 0 ManagedElement=1!! Warning: this is a Node Restart of RNC RNC11 !!===================================================================================Are you Sure [y/n] ? yPlease confirm the node type [mgw/rnc/rxi/rbs]: rnc

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 0 ManagedElement=1 manualRestart 3






RNC10> pol

Waiting 20 seconds before starting to poll...No contact to port 80, retrying in 1 second...No contact to port 80, retrying in 1 second...CORBA.OBJECT_NOT_EXIST Polling for 1m56s, MO service not ready, retrying in 10 seconds...CORBA.OBJECT_NOT_EXIST Polling for 2m06s, MO service not ready, retrying in 10 seconds...CORBA.OBJECT_NOT_EXIST Polling for 2m16s, MO service not ready, retrying in 10 seconds...CORBA.OBJECT_NOT_EXIST Polling for 2m26s, MO service not ready, retrying in 10 seconds...CORBA.OBJECT_NOT_EXIST Polling for 2m36s, MO service not ready, retrying in 10 seconds...CORBA.OBJECT_NOT_EXIST Polling for 2m46s, MO service not ready, retrying in 10 seconds...MO service is ready.

RNC10>

With OSE shell command

RNC11> restartObj me

$ restartObj meUsage: restartObj me <restartRank> <restatCause> <restartInfo> restartRank: has to be warm, refresh, cold or coldwtest .restartReason: has to be one of the below mentioned integer or string values 0 - reconfiguration, 1 - external_problems, 2 - upgrade_problems, 3 - O_and_M_problems, 4 - cyclic_recovery, 5 - locked_resources, 6 - perform_HW_test, 7 - call_processing_degradation, 8 - low_coverage, 9 - board_upgrade $

RNC11> restartObj me cold 0

Using the restart_confirmation feature

An moshell uservariable allows to add extra confirmation before performing a node restart, or disable node restart completely


From the moshell file description:....#==============================================================================# * 0 = no confirmation needed# * 1 = ask for node type on MGW/RNC/RXI# * 11 = ask for node type on MGW/RNC/RXI/RBS# * 2 = ask for node type and node name on MGW/RNC/RXI# * 22 = ask for node type and node name on MGW/RNC/RXI/RBS# * 3 = node restart forbidden on MGW/RNC/RXI# * 33 = node restart forbidden on MGW/RNC/RXI/RBS#==============================================================================restart_confirmation=1....

restart_confirmation = 1 or 11 RBS11> acc 0 manualrestartCall Action manualrestart on following MOs ?=================================================================================== 0 ManagedElement=1!! Warning: this is a Node Restart of RBS RBS11 !!===================================================================================Are you Sure [y/n] ? yPlease confirm the node type [mgw/rnc/rxi/rbs]: rnc!! Incorrect node type, please check that you are logged in to the correct node. RBS11> restartObj me warm 0Are you sure you want to restart the node?Please confirm [y/n] ? yPlease confirm the node type [mgw/rnc/rxi/rbs]: rbs restart_confirmation = 2 or 22 RBS11> acc 0 manualrestartCall Action manualrestart on following MOs ?=================================================================================== 0 ManagedElement=1!! Warning: this is a Node Restart of RBS RBS11 !!===================================================================================Are you Sure [y/n] ? yPlease confirm the node type [mgw/rnc/rxi/rbs]: rbsPlease confirm the node name: rbs1!! Incorrect node name, please check that you are logged in to the correct node.


RBS11> restartObj me warm 0Are you sure you want to restart the node?Please confirm [y/n] ? yPlease confirm the node type [mgw/rnc/rxi/rbs]: rbsPlease confirm the node name: rbs11 restart_confirmation = 3 or 33 RBS11> acc 0 manualrestart=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 0 ManagedElement=1 manualRestart 3!!!! Node Restart not allowed.=================================================================================================================Total: 1 MOs attempted, 0 MOs actioned $ restartObj me warm 0Node Restart not allowed.$ $ lhsh 001100 restartObj me warm 0Node Restart not allowed.$

9.2.3 Performing a board restart

With MO action (recommended way)


=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 485 Subrack=MS,Slot=14,PlugInUnit=1 manualRestart 3






Note: the board group can also be used instead of the link handler

RNC11> bp mod1

================================================Board BoardType Swallocation/DevType Module================================================001400 GPB3 GPB_Module 1

RNC11> pr mod1


RNC11> acc mod1 manualrestart

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 485 Subrack=MS,Slot=14,PlugInUnit=1 manualRestart 3






kienb3001> acc RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=KI3001RUL1 restartunit

Call Action restartunit on following 1 MOs ?=================================================================================== 1 Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=KI3001RUL1===================================================================================Call action restartunit on 1 MOs. Are you Sure [y/n] ? y

With OSE shell command

RNC10> lhsh 001400 reload warm

$ lhsh 001400 reload warm

RNC10> lhsh 001400 reload cold

$ lhsh 001400 reload cold

ERBS10> lhsh BXP_0_1 restart


9.2.4 Performing a program restart

With MO action (rank=warm)

RNC11> lacc Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1320997_R51KF03 restart

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 318 Subrack=MS,Slot=14,PlugInUnit=1,Program=CXC1320997_R51KF03 restart 0 >>> Return value = null


With OSE shell command progkill (rank=hot)

The progkill command is an alias for pgkill (CPP6 and below) or pm_kill (CPP7 and above)The CXC number or LM name can be given as argument.

RNC11> lhsh 001400 proglist

1 run CXC1320787_R51SZ01 (SystemManage) 2 run CXC1320742_R51SZ01 (spas_connect) 3 run CXC1321121_R51GD01 (nsssyci_mpbp) 4 run CXC1320995%31_R51GV01 (aal5_term_mp) 5 run CXC1320997_R51KF03 (usaal_term) 6 run CXC1322418%12_R51NZ01 (aal2cpsrc_12) 7 run CXC1320993_R51SK01 (aal2_rh) 8 run CXC1322417%12_R51TC01 (aal2ap_12) 9 run CXC1322419%12_R51TC01 (aal2distncc_) 10 run CXC1329850_R10CC01 (RncLmLoadCtr) 11 run CXC1329858_R10CC01 (RncLmModOm) 12 run CXC1329859_R10CC01 (RncLmDh) 13 run CXC1329856_R10CJ01 (RncLmCell)


15 run CXC1329857_R10CJ02 (RncLmUe)

RNC11> lhsh 001400 progkill lmue

$ echo Killing program CXC1329857_R10CJ02Killing program CXC1329857_R10CJ02$ lhsh 001400 pgkill 15$

RNC11> lhsh 001400 progkill 9857

$ echo Killing program CXC1329857_R10CJ02Killing program CXC1329857_R10CJ02$ lhsh 001400 pgkill 15$

137.58.194.134> lhsh 001700 proglist

090716-06:55:00 137.58.194.134 7.1t RNC_NODE_MODEL_K_9_95 stopfile=/tmp/292060x00020321 started CXC1728717_R9LA14 (RncLmSabp)0x000202c5 started CXC1728716_R9LA11 (RncLmRnsap)0x00030282 started CXC1728715_R9LA14 (RncLmRanap)0x00020245 started CXC1728714_R9LA13 (RncLmPcap)0x0002022b started CXC1728713_R9LA10 (RncLmLoadCtr)0x000201dc started CXC1728712_R9LA12 (RncLmCenRnh)0x000301a1 started CXC1728711_R9LA11 (RncLmCenMbms)0x0003016a started CXC1728710_R9LA16 (RncLmCenDrh)0x00030148 started CXC1728702_R9LA12 (RncLmCenAgps)0x00030140 started CXC1321121_R71AE20 (NssSyciBp)0x00030139 started CXC1721176_R71AE20 (PmAgent)0x00030133 started CXC1320742_R71AE15 (SpasConn)0x0003012d started CXC1327705_R71AE18 (dbagent)0x00030126 started CXC1321316_R71AE21 (ethernet)0x00020118 started CXC1321314_R71AE25 (sock)0x000c010b started CXC1320787_R71AE20 (SysMan)0x00030079 started CXC1725509_R71AE22 (SpasBasSpic)0x00020094 started CXC1725383_R71AE34 (IcsPqiiMp)0x00020088 started CXC1725507_R71AE29 (BcPpc750)0x0002007b started CXC1725489_R71AE37 (BcMpRole)0x00020061 started CXC1725310_R71AE36 (BcMpBp)0x00030057 started CXC1725558_R71AE31 (EthFcc)0x00040053 started CXC1725465_R71AE25 (i2cpqii)0x0001000d started core_module

137.58.194.134> lhsh 001700 progkill rnsapFinn Magnusson 2011-07-10 rev PA36 458/527)

090716-06:55:21 137.58.194.134 7.1t RNC_NODE_MODEL_K_9_95 stopfile=/tmp/29206

137.58.194.134> echo Killing program CXC1728716_R9LA11;lhsh 001700 pm_kill 0x000202c5;

090716-06:55:22 137.58.194.134 7.1t RNC_NODE_MODEL_K_9_95 stopfile=/tmp/29206$ echo Killing program CXC1728716_R9LA11Killing program CXC1728716_R9LA11$ lhsh 001700 pm_kill 0x000202c5$

9.3 CPP Licensing

Licensing is used to restrict access to features or capacity that the customer has not paid for.A license key file (in xml format) is generated containing the specifications of what features and capacity that the customer has paid for. This license key file is installed in every node using an action on Licensing MO:

If no license key is installed in the node: - up to CPP6, this means that all features and capacity are ENABLED - from CPP7 onwards, this means that all features and capacity are DISABLED

The following commands can be used to check license status for features and capacity.

RNC11> license

$ licenseUsage: license <cmd>Available command:license server : Licence server statuslicense client : License server clientslicense sub : License server client subscriptionslicense lkf : License key file statuslicense key : Installed license keys$

The moshell “inv” or “invh” command makes a summary of these printouts together with licensing info from the MOs.In order to work, a feature or capacity must be turned on both in the license as well as in the MO. - In RNC, the MOs RncFeature and RncCapacity are used. - In RBS, different attributes are used in different MOs like NodeBFunction, RbsLocalCell, etc.The purpose is so that the customer can deactivate/activate certain features even though they are enabled in the license key file.


Each license is unique for each node ==> the FingerPrint of the license must match the serial number of the backplane in Main Subrack, or the node_id (for nodes that do not have a subrack, e.g. RBS 6000)

9.3.1 Print licensed features and capacities

Example, RNC:

RNC11> license lkf

$ license lkfFormat Version : 2.0Sequence Number : 2000Finger Print : X911040657Signature Type : 5SWLT : GK-X911040657Product Type : WRANCustomer Id : 946060Licenses : 1$

RNC11> license server

$ license serverLicense Server : 000102c5Latest PV : 3License Key File : Installed, Wed Mar 16 02:34:47 2011Sequence Number : 2000Node Identity State : 1Backplane Node Id : X911040657Generated Node Id : Validation Start : Fri Mar 18 07:41:06 2011Validation Interval : 1 DayEmergency Status : DeactivatedEmergency State : 0Emergency Counter : 0Emergency State Time : Tue Aug 1 14:28:43 2006Emergency Time Limit : 7 Days$

RNC49> get licensing=1


=================================================================================================================1 SystemFunctions=1,Licensing=1=================================================================================================================LicensingId 1emergencyStateInfo Struct{2} >>> 1.state = 0 (NEVER_USED) >>> 2.time = 0f ingerpr int X911031272licenseFileUrl http://137.58.194.134/keyfiles/Licensing.xmluserLabel =================================================================================================================Total: 1 MOs

RNC49> get subrack=ms op.*prod

=================================================================================================================MO Attribute Value=================================================================================================================Subrack=MS operationalProductData Struct{5} >>> 1.productName = BACKPLANE >>> 2.productNumber = ROJ 605 107/3 >>> 3.productRevision = R1A >>> 4.serialNumber = X911031272 >>> 5.productionDate = 20050923=================================================================================================================Total: 1 MOs

RNC49> invl..<cut>...

(tables with information from the Feature/Capacity MOs)==================================================================================================================================MO featureState keyId licenseState serviceState userLabel==================================================================================================================================RncFeature=AgpsPositioning 0 (DEACTIVATED) CXC4030025 1 (ENABLED) 0 (INOPERABLE) A-GPS Positioning for commercial services


RncFeature=AmrNbMultiMode 0 (DEACTIVATED) CXC4030048 1 (ENABLED) 0 (INOPERABLE) AmrNbMultiModeRncFeature=CellBroadcastService 0 (DEACTIVATED) CXC4030043 1 (ENABLED) 0 (INOPERABLE) Cell Broadcast ServiceRncFeature=CellIdPositioning 0 (DEACTIVATED) CXC4030024 1 (ENABLED) 0 (INOPERABLE) Positioning Service, Cell AccuracyRncFeature=CellMocn 0 (DEACTIVATED) CXC4030033 1 (ENABLED) 0 (INOPERABLE) One-PLMN-id per FrequencyRncFeature=DlPsDchFc 0 (DEACTIVATED) CXC4030003 1 (ENABLED) 0 (INOPERABLE) Iub Flow ControlRncFeature=DualStackIub 0 (DEACTIVATED) CXC4030037 1 (ENABLED) 0 (INOPERABLE) ATM & IP dual stack support in RBS...<cut>....RncFeature=TransmitDiversity 0 (DEACTIVATED) CXC4030013 1 (ENABLED) 0 (INOPERABLE) Transmit Diversity==================================================================================================================================

==================================================================================================================================MO keyId capacityUnit licenseControlled currentLimit licensedLimit operatorLimit==================================================================================================================================RncCapacity=FachDchHsUsers CXC4031001 number of users 1 (TRUE) no limit no limit no limit RncCapacity=IubThroughput CXC4031000 kbps 1 (TRUE) no limit no limit no limit ==================================================================================================================================

(tables with information from the “license” command)==================================================================================================================================LicenseKeyFile: Installed, Wed Feb 24 17:15:33 2010, SequenceNumber: 0==================================================================================================================================FeatureId StartDate StopDate Status ChangeReason Description==================================================================================================================================CXC4030001 Enabled Licensed HSDPA Mobility phase 1CXC4030002 Enabled Licensed HSDPA Mobility phase 2CXC4030003 Enabled Licensed Iub Flow ControlCXC4030004 Enabled Licensed Service Based Handover CXC4030005 Enabled Licensed MOCNCXC4030006 Enabled Licensed Dynamic PS I/B RAB EstablishmentCXC4030007 Enabled Licensed Flexible initial rate selection, PS InteractiveCXC4030008 Enabled Licensed TrFO support for Speech 12.2 kbpsCXC4030010 Enabled Licensed MBMS Broadcast Mode with 64 kbps...<cut>...CXC4030613 Enabled Licensed Speech 12.2 kpbs and HSDPA interactive up to 384/HS RAB combinationCXC4030681 Enabled Licensed Conversational RAB for 64 kbps multimedia and HSDPA interactive RAB combinationCXC4040001 2010-02-23 2011-02-23 Key for test


==================================================================================================================================CapacityId StartDate StopDate CapLimit CapValue HardLimit HardValue ChangeReason Description==================================================================================================================================CXC4031000 False 0 False 0 Licensed RNC Throughput CapacityCXC4031001 False 0 False 0 Licensed RNC user capacity

Example, WRBS:

RBS6000> license lkf

$ license lkfFormat Version : 2.0Sequence Number : 0Finger Print : 481707_901500Signature Type : 5SWLT : GK-481707_901500Product Type : WRANCustomer Id : 946060Licenses : 1$

RBS6000> license server

$ license serverLicense Server : 0001039dLatest PV : 3License Key File : Installed, Wed Jan 26 15:30:08 2011Sequence Number : 0Node Identity State : 1Backplane Node Id : 481707_901500Generated Node Id : Validation Start : Fri Mar 18 09:31:52 2011Validation Interval : 1 DayEmergency Status : DeactivatedEmergency State : 0Emergency Counter : 0Emergency State Time : Wed Jan 26 15:30:07 2011Emergency Time Limit : 7 Days$


RBS6000> get licensing

=================================================================================================================1 SystemFunctions=1,Licensing=1=================================================================================================================LicensingId 1emergencyStateInfo Struct{2} >>> 1.state = 0 (NEVER_USED) >>> 2.time = 0f ingerpr int 481707_901500lastLicensingPiChange 101216-211413licenseFileUrl http://137.58.201.133/keyfiles/Licensing.xmluserLabel =================================================================================================================Total: 1 MOs

RBS6000> ls -l /c/node_id

$ ls -l /c/node_idDirectory '/c/node_id'-rw-rw-rw- 0 35 13 Mar 2011 23:06:14 node_identity.txt-rw-rw-rw- 0 21 24 Jun 2010 19:33:26 genNodeId.txt$

RBS6000> cat /c/node_id/node_identity.txt

$ cat /c/node_id/node_identity.txtchecksum:d2cb, nodeId:481707_901500$

RBS6000> inv ^cxc

(tables with information from the Feature/Capacity MOs)==================================================================================================================================KeyId FeatureName licenseState featureState (NodeB or RbsLocalCells)==================================================================================================================================CXC4010071/4005 StandardizedTma 1 0CXC4010071/4006 StandardizedRet 1 0


CXC4020001 HsdpaDynamicCodeAllocation 1 1 1 1 1 1 1CXC4020002 16Qam 1 1CXC4020003 HsdpaFlexibleScheduler 1 1CXC4020005 EnhancedUplinkIntroduction 1 CXC4020008 HsdpaIncrementalRedundancy 1 0 0 0 0 0 0CXC4020010 RttPositioning 1 CXC4020011 Eul2msTti 1 1CXC4020012 Mimo 0 0 0 0 0 0 0CXC4020013 EnhancedLayer2 1 0 0 0 0 0 0CXC4020014 64Qam 1 0CXC4020015 MbmsIubEfficiency 0 0CXC4020016 Grake 1 1CXC4020018 4wayRxDiversity 0 0 0 0 0 0 0CXC4020020 DlPowerControlEul 0 0CXC4020023 HsdpaImprovedLinkAdaptation 0 0CXC4030037 DualStackIub 0 0

==================================================================================================================================KeyId CapacityName licenseState licenseCapacity available/max (NodeB or RbsLocalCells)==================================================================================================================================CXC4010071/4002 RbsChannelElementsUplink 1 256 256CXC4010071/4003 RbsChannelElementsDownlink 1 128 387CXC4021001 NumHsPdschCodes 1 15 15 15 15 15 15 15CXC4021002 NumHsdpaUsers 1 32 32 32 32 32 32 32CXC4021007 NumEulUsers 1 16 16 16 16 16 16 16CXC4021008 Num40WPowerAmplifiers 0 0 CXC4021009 Num60WPowerAmplifiers 0 0 CXC4021010 NumCarriers 0 0

(tables with information from the “license” command)=================================================================================================================LicenseKeyFile: Installed, Tue Jun 30 14:04:48 2009, SequenceNumber: 0, graceTime ul=-1, dl=-1=================================================================================================================FeatureId StartDate StopDate Status ChangeReason Description=================================================================================================================CXC4010071/4005 Enabled Licensed Support for 3GPP compatible TMAsCXC4010071/4006 Enabled Licensed Support for 3GPP compatible RET antennasCXC4020001 Enabled Licensed HSDPA Dynamic Code AllocationCXC4020002 Enabled Licensed HSDPA 16 QAM Modulation


CXC4020003 Enabled Licensed HSDPA Flexible SchedulerCXC4020005 Enabled Licensed Enhanced Uplink IntroductionCXC4020006 Enabled Licensed Extended range up to 80 kmCXC4020007 Enabled Licensed Extended range up to 200 kmCXC4020008 Enabled Licensed HSDPA Incremental RedundancyCXC4020010 Enabled Licensed RTT positioningCXC4020011 Enabled Licensed Enhanced Uplink, 2ms TTICXC4020012 Enabled Licensed 2*2 MIMCXC4020013 Enabled Licensed Enhanced Layer2CXC4020014 Enabled Licensed HSDPA 64 QAMCXC4020015 Enabled Licensed MBMS Iub Efficiency ImprovementsCXC4020016 Enabled Licensed Advanced Receivers, GRAKE in RBSCXC4020020 Enabled Licensed DL Power Control for Enhanced UplinkCXC4020021 Enabled Licensed Software support for the RBS 3900 seriesCXC4020022 Enabled Licensed Configurable Carrier BandwithCXC4020023 Enabled Licensed Improved HSDPA Link AdaptationCXC4030037 Enabled Licensed ATM & IP dual stack support in RBSCXC4040001 2009-04-24 2010-05-04 LOAD MODULE/KEY FOR TEST

=================================================================================================================CapacityId StartDate StopDate CapLimit CapValue HardLimit HardValue ChangeReason Description=================================================================================================================CXC4010071/4002 False 0 False 0 Licensed RBS Channel Elements UplinkCXC4010071/4003 False 0 False 0 Licensed RBS Channel Elements DownlinkCXC4020017 False 0 False 0 Licensed Improved CE ladder for Enhanced UplinkCXC4021001 False 0 False 0 Licensed HSDPA codes per cellCXC4021002 False 0 False 0 Licensed HSDPA users per cellCXC4021003 False 0 False 0 Licensed Delayed Activation Of CapacityCXC4021004 False 0 False 0 Licensed Channel Element Ladder for E-DCH.CXC4021007 False 0 False 0 Licensed Enhanced Uplink users per cellCXC4021008 False 0 False 0 Licensed 40W Output power in RUW/RRUW based RBSCXC4021009 False 0 False 0 Licensed 60W Output power in RUW/RRUW based RBSCXC4021010 False 0 False 0 Licensed Number of carriers in RUW/RRUWbased RBS

Example, ERBS:

==================================================================================================================================Feature keyId licenseState featureState serviceState description==================================================================================================================================Anr=1 CXC4010620 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) Automated Neighbour RelationsCdma2000SessionContinuity=1 CXC4010614 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) CDMA2000 Session continuity, coverage triggered


CsfbForLimitedDualRadioUE=1 CXC4010949 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) Dl64Qam=1 CXC4010610 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) 64-QAM DLDrx=1 CXC4010912 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) DualAntDlPerfPkg=1 CXC4010609 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) Dual Antenna DL Performance PackageGsmSessionContinuity=1 CXC4010618 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) GERAN Session continuity, coverage triggeredInterFrequencySessionContinuity=1 CXC4010770 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) IntraLTEHODataFwd=1 CXC4010613 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) Data forwarding at Intra LTE handoverIntraLTEHandover=1 CXC4010612 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) Intra LTE handoverIrc=1 CXC4010319 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) MultiErabsPerUser=1 CXC4010723 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) Multiple Radio Bearer per userPmInitiatedUeMeasurements=1 CXC4010717 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) PM Initiated UE MeasurementsRbsEventStreamer=1 CXC4010856 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) RetCascading=1 CXC4010798 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) Support for Cascading of 3GPP Compatible RET AntennasRetConfigurationMgt=1 CXC4010830 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) Configuration management of 3GPP Iuant and AISGv2.0 compatible ALDsRetSupport=1 CXC4010622 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) RET SupportTimeAndPhaseSynchWithGPS=1 CXC4010917 0 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE) TmaSupport=1 CXC4010621 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) TMA SupportUePosCellId=1 CXC4010841 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) Ul16Qam=1 CXC4010611 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) 16-QAM ULVswrSupervision=1 CXC4010799 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) VSWRWcdmaSessionContinuity=1 CXC4010616 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) WCDMA Session continuity, coverage triggered==================================================================================================================================

==================================================================================================================================Capacity keyId licenseState licenseCapacity capacityUnit hardLimit percentileConf==================================================================================================================================ChannelBandwidth=10MHz CXC4010718 1 (ENABLED) 12 Nr of 10000kHz licenses ChannelBandwidth=15MHz CXC4010719 1 (ENABLED) 12 Nr of 15000kHz licenses ChannelBandwidth=1p4Mhz CXC4010721 0 (DISABLED) 0 Nr of 1400kHz licenses ChannelBandwidth=20MHz CXC4010720 1 (ENABLED) 12 Nr of 20000kHz licenses ChannelBandwidth=3MHz CXC4010722 0 (DISABLED) 0 Nr of 3000kHz licenses ChannelBandwidth=5MHz CXC4010627 1 (ENABLED) 12 Nr of 5000kHz licenses ConnectedUsers=1 CXC4010608 1 (ENABLED) 500 Nr of Connected Users 50 90 DlBasebandCapacity=1 CXC4010623 1 (ENABLED) 400 Mbit/s 0 90 OutputPower=40Watt CXC4010625 1 (ENABLED) 12 Nr of 40 Watt Licenses OutputPower=60Watt CXC4010626 1 (ENABLED) 12 Nr of 60 Watt Licenses UlBasebandCapacity=1 CXC4010624 1 (ENABLED) 200 Mbit/s 0 90 ==================================================================================================================================


==================================================================================================================================LicenseKeyFile: Not Installed, SequenceNumber: 0==================================================================================================================================FeatureId StartDate StopDate Status ChangeReason Description==================================================================================================================================CXC4010609 Disabled Not activated Dual Antenna DL Performance PackageCXC4010610 Disabled Not activated 64-QAM DLCXC4010611 Disabled Not activated 16-QAM ULCXC4010612 Disabled Not activated Intra LTE handoverCXC4010613 Disabled Not activated Data forwarding at Intra LTE handoverCXC4010614 Disabled Not activated CDMA2000 Session continuity, coverage triggeredCXC4010616 Disabled Not activated WCDMA Session continuity, coverage triggeredCXC4010618 Disabled Not activated GERAN Session continuity, coverage triggeredCXC4010620 Disabled Not activated Automated Neighbour RelationsCXC4010621 Disabled Not activated TMA SupportCXC4010622 Disabled Not activated RET SupportCXC4010717 Disabled Not activated PM Initiated UE MeasurementsCXC4010723 Disabled Not activated Multiple Radio Bearer per userCXC4010798 Disabled Not activated Support for Cascading of 3GPP Compatible RET AntennasCXC4010799 Disabled Not activated VSWRCXC4010830 Disabled Not activated Configuration management of 3GPP Iuant and AISGv2.0 compatible ALDs

==================================================================================================================================CapacityId StartDate StopDate CapLimit CapValue HardLimit HardValue ChangeReason Description==================================================================================================================================CXC4010608 True 0 True 0 Not activated Connected usersCXC4010623 True 0 True 0 Not activated Down Link CapacityCXC4010624 True 0 True 0 Not activated Up Link CapacityCXC4010625 True 0 True 0 Not activated Output power up to 40WCXC4010626 True 0 True 0 Not activated Output power up to 60WCXC4010627 True 0 True 0 Not activated Channel BandWith 5MHzCXC4010718 True 0 True 0 Not activated Channel BandWith 10MHzCXC4010719 True 0 True 0 Not activated Channel BandWith 15MHzCXC4010720 True 0 True 0 Not activated Channel BandWith 20MHzCXC4010721 True 0 True 0 Not activated Channel BandWith 1.4MHzCXC4010722 True 0 True 0 Not activated Channel BandWith 3MHz

Example, MGW:

MGW1> inv ^cxc


===============================================================================================================================LicenseKeyFile: Installed, Mon Nov 10 13:22:26 2008, SequenceNumber: 3026===============================================================================================================================FeatureId StartDate StopDate Status ChangeReason Description===============================================================================================================================CXC4010071/3003 2008-09-24 9999-12-31 KEY/M-MGW XC BASIC SW LICENSECXC4010071/3004 2008-09-24 9999-12-31 KEY/M-MGW SGW BASIC SW LICENSECXC4010071/3005 2008-09-24 9999-12-31 KEY/LAWFUL INTERCEPT NO:FAJ122990CXC4010071/3006 2008-09-24 9999-12-31 Enabled Licensed KEY/UMTS IU INTERFACE NO:FAJ121384CXC4010071/3007 2008-09-24 9999-12-31 KEY/GSM A-INTERFACE NO:FAJ121385CXC4010071/3008 2008-09-24 9999-12-31 Enabled Licensed KEY/GSM HS DATA SERV NO:FAJ121386CXC4010071/3009 2008-09-24 9999-12-31 KEY/IP TRANSPORT NO:FAJ121378CXC4010071/3011 2007-09-21 9999-12-31 Enabled Licensed KEY/VQE MCC NO:FAP131218CXC4010071/3012 2007-09-21 9999-12-31 Enabled Licensed KEY/VQE NOISE REDUCTION NO:FAP1312CXC4010071/3013 2007-09-21 9999-12-31 Enabled Licensed KEY/VQE FIXED LEVEL CONTROL NO:FAPCXC4010071/3014 2007-09-21 9999-12-31 Enabled Licensed KEY/VQE NETWORK PROBE NO:FAP131218CXC4010071/3015 2008-09-24 9999-12-31 KEY/SS7 SIGN OVER IP NO:FAJ121391CXC4010071/3016 2008-09-24 9999-12-31 KEY/SCCP ACCOUNTING NO:FAJ121392CXC4010071/3017 2008-09-24 9999-12-31 KEY/SCCP POLICING NO:FAJ121393CXC4010071/3018 2008-09-24 9999-12-31 KEY/SCCP RELAY NO:FAJ121394CXC4010071/3019 2008-09-24 9999-12-31 Enabled Licensed KEY/GTT NO:FAJ121388CXC4010071/3022 2008-09-24 9999-12-31 Enabled Licensed KEY/TFO NO:FAJ121939CXC4010071/3023 2008-09-24 9999-12-31 Enabled Licensed KEY/COMP SPEECH ON NB NO:FAJ121551CXC4010071/3024 2008-09-24 9999-12-31 Enabled Licensed KEY/MBAC NO:FAJ121400CXC4010071/3025 2008-09-24 9999-12-31 Enabled Licensed KEY/FAX SERVICE NO:FAJ121950CXC4010071/3026 2008-09-24 9999-12-31 SOFTWARE KEY/M-MGW KEY FOR CAPACITY ENHACXC4010071/3027 2008-09-24 9999-12-31 KEY/NB/MC OVER SATEL NO:FAJ1210097CXC4010071/3029 2008-09-24 9999-12-31 Enabled Licensed KEY/A/U-LAW CONVERSION NO:FAJ12100CXC4010071/3030 2008-09-24 9999-12-31 KEY/TDM CROSS CONNECT NO:FAJ121004CXC4010071/3032 2008-09-24 9999-12-31 KEY/ASSOCIATED SIGN. MODE NO:FAJ12CXC4010071/3033 2008-09-24 9999-12-31 KEY/NCLI NO:FAJ1210092CXC4010071/3034 2008-09-24 9999-12-31 Enabled Licensed KEY/GCP ON SCTP NO:FAJ1210093CXC4010071/3035 2008-09-24 9999-12-31 Enabled Licensed KEY/FAX SERVICE FOR DELAYS NO:FAJ1CXC4010071/3036 2008-09-24 9999-12-31 KEY/VOIP GW DEMO NO:FAJ1210160/1CXC4010071/3037 2008-09-24 9999-12-31 Enabled Licensed KEY/IU OVER IP NO:FAJ1210161CXC4010071/3042 2008-09-24 9999-12-31 KEY/TDM BASED HSL NO:FAJ1210166CXC4010071/3044 2008-09-24 9999-12-31 Enabled Licensed KEY/NB OVER IP NO:FAJ1210222CXC4010408/1101 2008-09-24 9999-12-31 Enabled Licensed KEY/GSM MSC PPROXY NO:FAJ1210391CXC4010408/1102 2008-09-24 9999-12-31 Enabled Licensed KEY/ADAPTIVE JITTER NO:FAJ1210393

===============================================================================================================================


CapacityId StartDate StopDate CapLimit CapValue HardLimit HardValue ChangeReason Description===============================================================================================================================CXC4010071/3002 2008-09-24 9999-12-31 True 70000 True 70000 Licensed KEY/SCC CAPACITY NO:FAJ19009 U:SCCCXC4010071/3020 2008-09-24 9999-12-31 No Limit KEY/AMBE+2 NO:FAJ19003 U:DEVICESCXC4010071/3021 2008-09-24 9999-12-31 True 1024 True 1024 Licensed KEY/CSD MOD NO:FAJ19004 U:DEVICESCXC4010071/3038 2008-09-24 9999-12-31 True 60000 True 60000 Licensed KEY/G.729 NO:FAJ1210162 U:CODECSCXC4010071/3039 2008-09-24 9999-12-31 True 60000 True 60000 Licensed KEY/AMR-WB NO:FAJ1210163 U:SCCCXC4010071/3040 2008-09-24 9999-12-31 True 1000 True 1000 Licensed KEY/PRA NO:FAJ1210164 U:INTERFACESCXC4010071/3045 2008-09-24 9999-12-31 1 KEY/IP MULTIPLEXING NO:FAJ1210344CXC4010408/1201 2008-09-24 9999-12-31 True 60000 True 60000 Licensed KEY/VOIP GATEWAY NO:FAJ1210160

MGW1> inv licensed

=================================================================================================================FeatureId StartDate StopDate Status ChangeReason Description=================================================================================================================CXC4010071/3006 2000-01-01 9999-12-31 Enabled Licensed UMTS Iu InterfaceCXC4010071/3008 2000-01-01 9999-12-31 Enabled Licensed GSM High Speed Datacom ServiceCXC4010071/3009 2000-01-01 9999-12-31 Enabled Licensed IP TransportCXC4010071/3011 2000-01-01 9999-12-31 Enabled Licensed Mobile Cross-Talk ControlCXC4010071/3012 2000-01-01 9999-12-31 Enabled Licensed Noise ReductionCXC4010071/3013 2000-01-01 9999-12-31 Enabled Licensed Fixed Level ControlCXC4010071/3014 2000-01-01 9999-12-31 Enabled Licensed Network ProbeCXC4010071/3019 2000-01-01 9999-12-31 Enabled Licensed Global Text TelephonyCXC4010071/3022 2000-01-01 9999-12-31 Enabled Licensed Tandem Free OperationCXC4010071/3023 2000-01-01 9999-12-31 Enabled Licensed Compressed Speech on Nb interfaceCXC4010071/3024 2000-01-01 9999-12-31 Enabled Licensed Measurement Based Admission ControlCXC4010071/3025 2000-01-01 9999-12-31 Enabled Licensed Fax serviceCXC4010071/3029 Disabled Licensed CXC4010071/3035 Disabled Licensed

=================================================================================================================CapacityId StartDate StopDate CapLimit CapValue HardLimit HardValue ChangeReason Description=================================================================================================================CXC4010071/3002 2000-01-01 9999-12-31 True 50125 True 50125 Licensed M-MGw R4 Main Basic SW LicenseCXC4010071/3021 2000-01-01 9999-12-31 True 256 True 256 Licensed CSD Modem


MGW1> lh ommp fro_lici_data_list

=============================================================================================$ lhsh 000600 fro_lici_data_list0006: MgwAppl 00006: capacityLimit 0x111700006: gsmHscsdEnabled true0006: gttEnabled true0006: ipNbEnabled true0006: umtsIuEnabled true0006: mccEnabled true0006: nrEnabled true0006: amr2OnNbEnabled true0006: mbacEnabled true0006: tfoEnabled true0006: gsmFaxEnabled true0006: auLawConvEnabled true0006: gsmFaxLongDelaysEnabled true0006: gcpOverSctpEnabled true0006: noOfVoipChannels 0xea600006: noOfAmrWbChannels 0xea600006: swlIuOverIpEnabled true0006: noOfG729Codecs 0xea60=============================================================================================$ lhsh 000700 fro_lici_data_list0007: lhsh: unknown command 'fro_lici_data_list'$

MGW1> h2d 0x11170

0x11170: 70000

MGW1> h2d 0xea60

0xea60: 60000

To parse the XML license file:http://unix.epa.ericsson.se/~epabull/license_check.php

9.3.2 Installing a license key on one node


RNC11> license

$ licenseUsage: license <cmd>Available command:license server : Licence server statuslicense client : License server clientslicense sub : License server client subscriptionslicense lkf : License key file statuslicense key : Installed license keys$

RNC11> license lkf

$ license lkfLicense Key File Status : 4 (NO_LICENSE_KEY_FILE)Additional Info : Non-key mode$

RNC11> license server

$ license serverLicense Server : 000202a3Server Mode : Non KeyLatest PV : 2License Key File : Not InstalledSequence Number : 0Node Identity State : 1Backplane Node Id : X911040657Generated Node Id : Validation Start : Thu Feb 25 11:53:01 2010Validation Interval : 1 DayEmergency Status : DeactivatedEmergency State : 0Emergency Counter : 0Emergency State Time : Tue Aug 1 14:28:43 2006Emergency Time Limit : 7 Days$

RNC11> get licensing

=================================================================================================================1 SystemFunctions=1,Licensing=1


=================================================================================================================LicensingId 1emergencyStateInfo Struct{2} >>> 1.state = 0 (NEVER_USED) >>> 2.time = 0licenseFileUrl userLabel =================================================================================================================Total: 1 MOs

RNC11> acl licensing

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 1 Licensing=1 setEmergencyState 0 1 Licensing=1 updateLicenseKeyFile 4=================================================================================================================

RNC11> mom licens key

##################################################################################MO Class Action Parameters##################################################################################Licensing updateLicenseKeyFile 4:userId:password:ipAddress:sFile:string:string:string:string----------------------------------------------------------------------------------This action sends a request to the FTP/SFTP server to update the license key file.User Id for login to FTP/SFTP server where license key files are located. If a null string userId is given, anonymous FTP/SFTP transfer is assumed. Max length is 20 characters.Password for login to the FTP/SFTP server where license key files are located. Max length is 20 characters.The IpAddress of the FTP/SFTP server where license key files are located. Max length is 16 characters.Source name and path of the license key file on the FTP/SFTP server. Max length is 256 charcters.Transaction required = NoReturnType: voidParameter 1: userId (string).Parameter 2: password (string).Parameter 3: ipAddress (string).Parameter 4: sFile (string). **********************************************************************************


RNC11> acc licensing=1 updatelicensekeyfile

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 1 Licensing=1 updateLicenseKeyFile 4

Parameter 1 of 4, userId (string): ftp

Parameter 2 of 4, password (string):

Parameter 3 of 4, ipAddress (string): 137.58.214.3

Parameter 4 of 4, sFile (string): /export/home/ftp/wanessa_B/licensing/X911040657_100224_112337.xml >>> Return value = null


RNC11> lge -m 1

====================================================================================================================Timestamp (UTC) MO-reference Event====================================================================================================================2010-02-24 11:53:05 EV RncFunction=1 RncFunction_NodeRestartCompleted2010-02-24 17:15:33 EV Licensing=1 Licensing_FeatureChange. CXC4040001 Enabled

RNC11> license lkf

$ license lkfFormat Version : 2.0Sequence Number : 0Finger Print : X911040657Signature Type : 5SWLT : GK-X911040657Product Type : WRANCustomer Id : 946060Licenses : 1$


9.3.3 Installing a license key file in many nodes:

commandfile:----------------lt licensingacc licensing updatelicensekeyfileuseridpasswordipaddress$path

sitefile:------------ipaddress1 path=/xxx/yyy/zzzipaddress2 path=/xxx/yyy/aaa

mobatch sitefile commandfile

9.3.4 Set licensing emergency state

It is also possible to temporarily activate all features with the action setEmergencyState. The action keeps effect for one week.

MGW1> mom licens emergency

##################################################################################MO Class Action Parameters##################################################################################Licensing setEmergencyState 0----------------------------------------------------------------------------------This action sets the license server into emergency state.I.e. opens up all licensed features and capacity restrictions.Disabling emergency state is done by loading a new license key file.Transaction required = NoReturnType: void**********************************************************************************



=================================================================================================================6 SystemFunctions=1,Licensing=1=================================================================================================================LicensingId 1emergencyStateInfo Struct{2} >>> 1.state = 0 (NEVER_USED) >>> 2.time = 0licenseFileUrl userLabel =================================================================================================================Total: 1 MOs

RNC11> acc licensing setemergencystate

=================================================================================================================Proxy MO Action Nr of Params================================================================================================================= 6 Licensing=1 setEmergencyState 0>>> return value = null



=================================================================================================================6 SystemFunctions=1,Licensing=1=================================================================================================================LicensingId 1emergencyStateInfo Struct{2} >>> 1.state = 1 (ACTIVE) >>> 2.time = 0licenseFileUrl userLabel =================================================================================================================Total: 1 MOs


RNC11> mom lic stateinfo

##################################################################################################MO Class Attribute Type Flags##################################################################################################Licensing emergencyStateInfo structRef:EmergencyInfo readOnly,noNotification--------------------------------------------------------------------------------------------------This attribute holds information about the emergency status and the time remaining in the current state.Note! If the node is in emergency state USE_DEGRADED, or the emergency state is USE_DISABLED, the the value of'time' is insignificant.**************************************************************************************************

RNC10> mom emergencyinfo .

##################################################################################Struct StructMember Type##################################################################################EmergencyInfo state enumRef:EmergencyStatus----------------------------------------------------------------------------------The current emergency state of the license server.Default=NEVER_USED **********************************************************************************EmergencyInfo time long----------------------------------------------------------------------------------This attribute holds information on the time elapsed in this state.Note: The time out values for the states ALL_OPEN, DEGADED and PROLONGED is 7 days. The unit for this attribute is seconds.1 day = 86400 seconds7 days = 604800 seconds.Default=0 **********************************************************************************

RNC10> mom emergencystatus

##################################################################################Enum Values##################################################################################EmergencyStatus 0:NEVER_USED, 1:ACTIVE, 2:USE_DEGRADED, 3:ACTIVE_AGAIN, 4:USE_DISABLED----------------------------------------------------------------------------------This enumeration specifies the different stages of the emergency state. - NEVER_USED: Emergency state has not been activated since installation of license key file.


- ACTIVE: All capacity restrictions removed and all features enabled. The maximum time in this state is 7 days. - USE_DEGRADED: A new license key file has to be istalled in order not to jopardize future use and performance.The maximum time in this state is 7 days. - ACTIVE_AGAIN: All features enabled again for a maximum period of 7 days then a new license key file has to be installed in order to be able to use this node. - USE_DISABLED: Use of the node is no longer allowed since no new license key file has been installed.**********************************************************************************

10 NETWORK HANDLING

10.1 Ipdatabase

The ipdatabase is a file where you can store for each node of the network: - nodename (arbitrary)- ipaddress or dns name- password (optional)- any uservariables or scripting variables that should be set before connecting to the node (optional)

The format of the ipdatabase file is like this:nodeName ipAddress/DNSname password uservariables/scriptingvariables

Example:

** NONE ** eanzmagn@srld7243:=> cat /home/eanzmagn/moshell_sitefiles/ipdatabasernc10 137.58.194.88 tch88 secure_shell=1rnc21 10.1.162.169 rnc21 sa_credential=/home/eanzmagn/rnc21_sam.pbe,sa_password=rnc21,corba_class=3rnc26 10.1.163.169 rnc26 rnc46 10.1.161.169 rnc46 rbs3206 rbs173.ericsson.se rbs173 username=rbs3206

The path to the ipdatabase is stored in the uservariable ip_database:

RNC11> uv ip_database

ip_database = /home/eanzmagn/moshell_sitefiles/ipdatabase

Several ipdatabase files can be referred in this uservariable:

** NONE ** eanzmagn@srld7243:=> cat ~/.moshellrc...<cut>...


ip_database=/home/eanzmagn/moshell_sitefiles/ipdatabase_telia,/home/eanzmagn/moshell_sitefiles/ipdatabase_tele2

When starting moshell, it looks in the list of ipdatabase files to find a matching entry for that entry. If an entry is found, it uses this to know the ipaddress, the node password, and set any associated uservariables and/or scripting variables.

** NONE ** eanzmagn@srld7244:=> moshell rbs3206

##################################################################### Welcome to MoShell 7.0q ## Finn Magnusson, Jan Pettersson ## http://utran01.epa.ericsson.se/moshell ## Contact: [email protected] ## [email protected] #####################################################################


HELP MENU : hMO COMMANDS : mOTHER COMMANDS : nPM COMMANDS : pQUIT : q

RBS3206> vii

070916-04:41:32 rbs173. sw.ericsson.se 7.0q stopf i le=/tmp/17661Trying password from ipdatabase file: /home/eanzmagn/moshell_sitefiles/ipdatabase...$ vii----- VII SERVER INFO ----- registered cl ients : client FAULT LOAD_START NO_POWER BOOTTEST MISSING_RESOURCE BOARD_LOCKED BOARD_BUSY SHUTDOWN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0x00010351 NO NO NO NO NO NO YES NO

LED State GREEN CLS_LEDI_ON RED CLS_LEDI_OFF YELLOW CLS_LEDI_FLASHING_16HZ$

RBS3206> uv username

username = rbs3206


10.2 Mobatch

Mobatch is a utility located in the moshell folder. It is used for running moshell sessions on several nodes in parallel.

The list of nodes can either be specified on the command line:

**:ws4264@~> mobatch rnc2,rbs3,mgw5 ‘lt all;st;al’

or from a sitefile, containing the list of nodes, one node per line:

**:ws4264@~> cat sitefiles/stockholm.txtrnc2rbs3mgw5**:ws4264@~> mobatch sitefiles/stockholm.txt ‘lt all;st;al’

The commands can either be specified on the command line:

**:ws4264@~> mobatch rnc2,rbs3,mgw5 ‘lt all;st;al’

or from a command file containing the commands, one command per line:

**:ws4264@~> cat commandfiles/healthcheck.txtlt allstal**:ws4264@~> mobatch sitefiles/stockholm.txt commandfiles/healthcheck.mos

**:ws4264@~> mobatch sitefiles/stockholm.txt ‘trun commandfiles/moscript.mo’

or from set of command files associated to each individual node (in case each node will run different commands)in this case, the name of each command file must contain the name of the node, followed by the extension “.mos” or “.cmd"

**:ws4264@~> ls –l commandfiles/stockholm/-rw-rw-rw- 1 eanzmagn mkgroup-l-d 58608 Mar 21 2006 rnc2.mos-rw-rw-rw- 1 eanzmagn mkgroup-l-d 29244 Mar 21 2006 rbs17.mos-rw-rw-rw- 1 eanzmagn mkgroup-l-d 29244 Mar 21 2006 mgw5.mos

**:ws4264@~> mobatch sitefiles/stockholm.txt commandfiles/stockholm/


Example:

**:ws4264@~> mobatch rnc11,mgw1,rbs17 'lt all;st;al'

Sitelist = rnc11,mgw1,rbs17. Number of si tes = 3Command = lt all;st;alTimeout set to 20 minutes (default value)Maximum number of parallel processes set to 10 (default value)

Logfiles stored in /home/eanzmagn/logs_mobatch/2008-11-28/rnc11_and_more/12-42

###########################################################################################>>>>> STARTED (pid)** FINISHED (result) STATUS (started, finished, queue, running, sites running)###########################################################################################>>>>> rnc11 (22032) 1s 0f 2q 1r: rnc11 >>>>> mgw1 (22034) 2s 0f 1q 2r: mgw1 rnc11 >>>>> rbs17 (22036) 3s 0f 0q 3r: mgw1 rbs17 rnc11 ** mgw1 (OK) 3s 1f 0q 2r: rbs17 rnc11 ** rbs17 (OK) 3s 2f 0q 1r: rnc11 ** rnc11 (OK) 3s 3f 0q 0r: ###########################################################################################

OK 0m31s rnc11OK 0m42s mgw1OK 0m25s rbs17

Logfiles stored in /home/eanzmagn/logs_mobatch/2008-11-28/rnc11_and_more/12-42

**:ws4264@~> **:ws4264@~> cd /home/eanzmagn/logs_mobatch/2008-11-28/rnc11_and_more/12-42Directory: /home/eanzmagn/logs_mobatch/2008-11-28/rnc11_and_more/12-42**:ws4264@/home/eanzmagn/logs_mobatch/2008-11-28/rnc11_and_more/12-42> **:ws4264@/home/eanzmagn/logs_mobatch/2008-11-28/rnc11_and_more/12-42> ls -ltotal 480drwxr-xr-x 2 eanzmagn rnd 55 2008-11-28 12:42 ./drwxr-xr-x 3 eanzmagn rnd 18 2008-11-28 12:42 ../-rw-r--r-- 1 eanzmagn rnd 206771 2008-11-28 12:42 mgw1.log-rw-r--r-- 1 eanzmagn rnd 42142 2008-11-28 12:42 rbs17.log-rw-r--r-- 1 eanzmagn rnd 237112 2008-11-28 12:42 rnc11.log**:ws4264@/home/eanzmagn/logs_mobatch/2008-11-28/rnc11_and_more/12-42> grep Total *mgw1.log:Last MO: 3659. Loaded 3659 MOs. Total : 3660 MOs.mgw1.log:Total: 2019 MOs


mgw1.log:>>> Total: 27 Alarms (0 Critical, 24 Major)rbs17.log:Last MO: 1894. Loaded 1894 MOs. Total : 1895 MOs.rbs17.log:Total: 387 MOsrbs17.log:>>> Total: 0 Alarms (0 Critical, 0 Major)rnc11.log:Last MO: 8143. Loaded 8143 MOs. Total : 8144 MOs.rnc11.log:Total: 2699 MOsrnc11.log:>>> Total: 6 Alarms (0 Critical, 5 Major)**:ws4264@/home/eanzmagn/logs_mobatch/2008-11-28/rnc11_and_more/12-42>

When one of the moshell sessions started by mobatch takes longer than expected, it is killed, in order to avoid hanging sessions. The default timeout is 20 but it can be increased with the “-t” option:

**:ws4264@~> mobatch -t 60 sitefiles/wholenetwork.txt 'lt all;st;al'

.....Timeout set to 60 minutes ....

The number of nodes specified in the sitefile is unlimited but mobatch runs in batches of 10 simultaneous sessions at a time.To increase the batch size, use the option “-p”:

**:ws4264@~> mobatch -p 20 sitefiles/wholenetwork.txt 'lt all;st;al'

.....Maximum number of parallel processes set to 20 ....

Before increasing the number of parallel sessions, it is important to check that the workstation has enough free RAM memory, to avoid overloading it.Each moshell session takes between 80 to 100 MB of RAM, depending on the number of MOs in the node.

% toplast pid: 27824; load averages: 0.01, 0.01, 0.01 14:34:3582 processes: 79 sleeping, 2 zombie, 1 on cpuCPU states: 97.4% idle, 0.0% user, 0.9% kernel, 1.7% iowait, 0.0% swapMemory: 8192M real, 6193M free, 447M swap in use, 14G swap free

For more information on mobatch, see user guide and online help by typing mobatch on its own:

**:mframe131@~> mobatchUsage: mobatch [options] <sitefile>|<sitelist>|<dumpdir> <command(s)>|<commandfile>|<commanddir> [logdirectory]


Purpose: To send moshell commands to several nodes in parallel.

Arguments: - The first argument is the sitefile, sitelist, or dumpdir. The sitefile is a file containing the list of sites to connect to. Each line in the sitefile contains: * the IP/DNS addresses and/or site names whose IP address are defined in the IP database. * optionally: the uservariables/scriptingvariables to input with -v option. See example of sitefile and ipdatabase in: moshell/examples/mobatch_files/ If using the sitelist, the sites are listed on the command line and separated by commas. The dumpdir is a directory containing: * MO dumps (format: <kget.log.gz> or <modump.zip>) * or CVs/dbdat files (format: <cv.zip> or <db.dat>) -> only supported with option "-d" - The second argument is the commmands or commandfile. See example of commands below and commandfile in moshell/examples/mobatch_files If a directory is given, then a different commandfile will be used for each node: the name of each commandfile should be <node-name>.cmd or <node-name>.mos the <node-name> should be the same as given in the sitefile. example: node-name is rbs602 ==> commandfile should be rbs602.cmd or rbs602.mos - The third argument (logdirectory) is optional. If no logdirectory is specified, a default one will be used. Options: - t <minutes> Specify the number of minutes before timing out. Set to 0 for no timeout (default=20) - p <processes> Specify the maximum number of moshell sessions that will run in parallel (default=10) - i <seconds> Specify the interval in seconds between spawning of each moshell session (default=0) - v <userVariables> Specify moshell uservariables. Type "moshell" on its own for more info about this option. - o Print output of every moshell session both to screen and to logfile. - s Silent. No output is printed. - d Run moshell in sql mode. Only applicable when first argument is a directory ("dumpdir") - r Recursive folder search. Only applicable when first argument is a directory ("dumpdir"). Examples: mobatch -p 15 -t 60 ~/sitefiles/victoria-sites 'lt all ; get' mobatch 10.1.128.10 ./cmdfiles/kget.mos mobatch 10.1.128.10,rnc34,rbs10,mgw1.ericsson.se ./cmdfiles/kget.mos mobatch ./sitefiles/all-rbs.txt ./cmdfiles/do_healthCheck.mos mobatch -p 5 -t 1 ./sitefiles/all-rbs.txt 'cv cu ; rbs' mobatch ./sitefiles/all-rnc.txt 'lt ûtrancell ; st cell' mobatch ./sitefiles/all-bsc.txt ~/bsc-commandfiles/ mobatch -v security_method=2,sa_credential=~/sam.pbe,sa_password=oemas -p 20 ./all_mgw.txt 'hc' mobatch -v ip_database=~/utran_network/ipdatabase ~/utran_network/ipdatabase 'lt all ; get ' mobatch modumpfolder/ 'str;std;sti;stv;inv' mobatch -r modumpfolder/ 'str;std;sti;stv;inv' mobatch -dr dbdatfolder/ dbc


11 DATA COLLECTION AND AUDIT

11.1 TR/CSR data collection

UV NOCORBA=1

RNC11> h dcg

*******************************************************dcg[measrifk] [<logdir>]*******************************************************Fetch data for TRs/CSRs, according to the Data Collection Guidelines.

The dcg command offers a number of options, it is possible to combine several options, eg: "dcgmsrq"

Options: - m: mandatory data - e: subset of the mandatory data which can be taken in case of emergency, before doing board/node restart. This option will usually be run on its own. - a: AAL2 printouts - s: SS7 printouts - i: IP printouts - r: RNC/RBS specific printouts - f: fetch cpp logs and ropfiles. Two zipfiles are produced (one for cpp logs and one for ropfiles) which can be used in offline mode in pmr, pmx, lg and the "-l" option. Refer to the chapter "Offline mode" for more info. - k: take MO dump (kget format) . A zipfile is produced containing the MO dump and MOM of the node, it can be used in offline mode by running "moshell <zipfile>". Refer to the chapter "Offline mode" for more info.

Argument: - the directory where the collected data will be stored. If no directory is given, the directory ~/moshell_logfiles/logs_moshell/dcg/<node>/<date>_<time>/ is used.

Please refer to the command file in moshell/commonjars/scripts/dcg_datacollection.mos to view the various commands that are run for each option.More info about each command can be found by typing "h <command>"

For TR/CSR data collection the main command is “dcgm” which collects all mandatory data. This can take up to one hour on large nodes.If it is an emergency and the node must be restarted as soon as possible, a smaller set of data can be collected by using the dcge command, this takes less than 15 minutes.

The logs collected by dcg are stored in the folder called ~/moshell_logfiles/logs_moshell/dcg/<node>/<date>_<time>.

Example:


**:ws4264@/home/eanzmagn/moshell_logfiles/logs_moshell/dcg/RNC11/080505_102644> ls -ltotal 8100-rw-rw-rw- 1 eanzmagn rnd 767812 2008-05-05 10:35 RNC11_dcg_m.log.gz-rw-rw-rw- 1 eanzmagn rnd 820269 2008-05-05 10:35 RNC11_logfiles.zip-rw-rw-rw- 1 eanzmagn rnd 5611712 2008-05-05 10:33 RNC11_ropfiles.zip-rw-rw-rw- 1 eanzmagn rnd 5611712 2008-05-05 10:33 RNC11_modump.zip-rw-rw-rw- 1 eanzmagn rnd 536626 2008-05-05 10:30 RNC11_DCG_20080505_102915_duringfault.zip

If the node’s MO service is unavailable, the command “uv nocorba=1” should be executed prior to running the “dcg”.This is to prevent moshell from attempting to connect to the MO service otherwise the dcg command would fail.

RNC11> uv nocorba=1

RNC11> dcgm

.....

11.2 Parameter audit

The moshell command “diff” is used for checking that :- the MO attributes are within the allowed range, according to the value ranges specified in the MOM (command “momr”)- the MO attributes are according to the recommended values specified in the RAN documents 19059-HSD10102 --> there are currently no reference

documents for MGW and eNodeB so this check only applies to RNC/RBS/RXI for the moment.

More info about the “diff” command can be found in:- moshell/examples/audit_files/EAB_FJW-08_0071.doc- or the help for the diff command:

RNC10> h diff

*******************************************************diff/ldiff*******************************************************.... 2) Syntax 2: diff / ldif f <moGroup>|<moFilter>|<proxy>|<modumpFile>|<modumpDir> [<baselineFile>|<modumpFile2>|default] [<outputDir>]To compare an MO dump with a parameter baseline file or with another MO dump.etc.....


11.2.1 Online check

Checking all MOs

RNC11> lt all

RNC11> diff .

Using paramfile /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_G_1_0.txt

Getting MO data from node (5964 MOs). Please wait...0% ~50% ~100%...............................................................................................................Log close: /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20090416/RNC11_070602.logParsing MOM (cached): /home/eanzmagn/jarxml/RNC_NODE_MODEL_G_5_30_COMPLETE.xml.cache.gz .......................................................Done.Parsing file /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_G_1_0.txt ......................................................................................................Done.Parsing file /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20090416/RNC11_070602.log ......................................................................................................Done.

====================================================================================================MO Attribute CurrentValue ReferenceValue====================================================================================================Aal2QosProfile=Aal2QosPr-1 profileClassA.boundOnNodeDelay 5000 10000Aal2QosProfile=Aal2QosPr-1 profileClassB.boundOnNodeDelay 15000 20000Aal2QosProfile=Aal2QosPr-1 profileClassD.boundOnNodeDelay 8000 50000Aal2QosProfile=Aal2QosPr-1 profileClassD.boundOnProbOfDelay 500000 1000000000Aal2QosProfile=Aal2QosPr-1 profileClassD.boundOnProbOfLoss 500000 1000000000Aal2QosProfile=Aal2QosPr-ad8 profileClassA.boundOnNodeDelay 8000 10000Aal2QosProfile=Aal2QosPr-ad8 profileClassB.boundOnNodeDelay 15000 20000Aal2QosProfile=Aal2QosPr-ad8 profileClassD.boundOnNodeDelay 8000 50000Aal2QosProfile=Aal2QosPr-ad8 profileClassD.boundOnProbOfDelay 500000 1000000000Aal2QosProfile=Aal2QosPr-ad8 profileClassD.boundOnProbOfLoss 500000 1000000000ChannelSwitching=1 downswitchTimerThreshold 2 0ChannelSwitching=1 inactivityTimer 12 30DchFrameSynch=2 toAEUl 400 95DchFrameSynch=2 toAWEUl 100 2DchFrameSynch=2 toAWSUl 400 40


DchFrameSynch=2 uto 100 11ManagedElementData=1 ntpBurstFlagPrimary true falseManagedElementData=1 ntpMaxPollSecondary 0 1024ManagedElementData=1 ntpMaxPollThird 0 1024ManagedElementData=1 ntpMinPollPrimary 16 64ManagedElementData=1 ntpMinPollSecondary 0 64ManagedElementData=1 ntpMinPollThird 0 64ManagedElementData=1 ntpServiceActivePrimary true falseMtp3bSpItu=Iu networkInd 1 (SPARE) 2 (NATIONAL_NETWORK)NniSaalProfile=1 profileData.mps 0 2NniSaalProfile=2 profileData.mps 0 2Paging=1 utranDrxCycleLength 6 5PowerControl=1 sirMax 100 "100: if EUL is not activated 120: if EUL is activated"PowerControl=1 ulInitSirTargetEdch 70 30RabHandling=1 eulHarqRv 0 (CHASE_COMB) 1 (INCR_REDUND)SccpSp=Iu,SccpScrc=1,SccpApLocal=Iu useS1 false trueUeMeasControl=1 event1dRncOffset 0 2UeMeasControl=1 event1dRncThreshold 4 2UeMeasControl=1 nonUsedFreqThresh4_2bEcno -9 -10UeMeasControl=1 nonUsedFreqThresh4_2bRscp -95 -100UeMeasControl=1 usedFreqRelThresh4_2bEcno -1 0UeMeasControl=1 usedFreqRelThresh4_2bRscp -3 0UeMeasControl=1 usedFreqThresh2dEcnoDrnc -12 -13UeMeasControl=1 usedFreqThresh2dRscpDrnc -100 -105UeMeasControl=1 utranRelThresh3aEcno -1 0UeMeasControl=1 utranRelThresh3aRscp -3 0UtranCell=Iub-1-1 pwrLoadThresholdDlSpeech.amr12200 1 100UtranCell=Iub-1-1 pwrLoadThresholdDlSpeech.amr7950 0 100UtranCell=Iub-1-1 sf16AdmUl 16 50UtranCell=Iub-1-1 sf4AdmUl 4 1000UtranCell=Iub-1-1 sf8AdmUl 8 50UtranCell=Iub-1-1 usedFreqThresh2dEcno -12 -13UtranCell=Iub-1-1 usedFreqThresh2dRscp -100 -105UtranCell=Iub-1-1,Rach=1016 maxPreambleCycle 4 32UtranCell=Iub-1-1,Rach=1016 powerOffsetP0 3 1UtranCell=Iub-1-1,Rach=1016 preambleRetransMax 8 32...<cut>...====================================================================================================

Saved result in csv format: /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20090416/RNC11_070602.csv ($diffcsvfile)

Created command file to correct differences: /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20090416/RNC11_070602.mos ($diffcmdfile)

Note: to convert command files from moshell format to trun/emas format, execute the command: u! <commandfile>Finn Magnusson 2011-07-10 rev PA36 487/527)

Checking that the attribute values are within range specified in MOM ("momr")...found 4 inconsistencies:

====================================================================================================MO Attribute CurrentValue AllowedRange====================================================================================================Aal2Sp=1,Aal2Ap=Iuc-2351-2300 timerErq 4000 5000 to 30000ManagedElementData=1 ntpMaxPollSecondary 0 16 to 131072ManagedElementData=1 ntpMaxPollThird 0 16 to 131072ManagedElementData=1 ntpMinPollSecondary 0 16 to 131072ManagedElementData=1 ntpMinPollThird 0 16 to 131072UtranCell=Iub-2-1 tCell 10 0 to 9

Checking some MOs

RNC11> diff UtranCell=Iub-9-3

Using paramfile /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_G_1_0.txt

Getting MO data from node (1 MOs). Please wait...0% ~50% ~100%.Log close: /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20090416/RNC11_071121.logParsing MOM (cached): /home/eanzmagn/jarxml/RNC_NODE_MODEL_G_5_30_COMPLETE.xml.cache.gz .......................................................Done.Parsing file /home/eanzmagn/moshell/commonjars/pm/PARAM_RNC_G_1_0.txt ......................................................................................................Done.Parsing file /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20090416/RNC11_071121.log ..........................................................................Done.

====================================================================================================MO Attribute CurrentValue ReferenceValue====================================================================================================UtranCell=Iub-9-3 pwrLoadThresholdDlSpeech.amr12200 1 100UtranCell=Iub-9-3 pwrLoadThresholdDlSpeech.amr7950 0 100UtranCell=Iub-9-3 sf16AdmUl 16 50UtranCell=Iub-9-3 sf4AdmUl 4 1000UtranCell=Iub-9-3 sf8AdmUl 8 50UtranCell=Iub-9-3 usedFreqThresh2dEcno -12 -13UtranCell=Iub-9-3 usedFreqThresh2dRscp -100 -105====================================================================================================





Checking that the attribute values are within range specified in MOM ("momr")...all values OK.

11.2.2 Checking against a customized reference file

When no reference file is specified (as above), the default reference file is chosen according to the node type and SW version. But it’s possible to use a different reference file, as long as it follows the same format as the default ones, which can be found under moshell/commonjars/pm/PARAM*

RNC11> diff UtranCell=Iub-9-3 /home/eanzmagn/customer_reference.txt

Getting MO data from node (1 MOs). Please wait...0% ~50% ~100%.Log close: /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20090416/RNC11_071632.logParsing MOM (cached): /home/eanzmagn/jarxml/RNC_NODE_MODEL_G_5_30_COMPLETE.xml.cache.gz .......................................................Done.Parsing file /home/eanzmagn/customer_reference.txt ......................................................................................................Done.Parsing file /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20090416/RNC11_071632.log ..........................................................................Done.

====================================================================================================MO Attribute CurrentValue ReferenceValue====================================================================================================UtranCell=Iub-9-3 eulServingCellUsersAdm 4 32UtranCell=Iub-9-3 pwrLoadThresholdDlSpeech.amr12200 1 100UtranCell=Iub-9-3 pwrLoadThresholdDlSpeech.amr7950 0 100UtranCell=Iub-9-3 pwrOffset 5 15UtranCell=Iub-9-3 sf16AdmUl 16 50UtranCell=Iub-9-3 sf4AdmUl 4 1000UtranCell=Iub-9-3 sf8AdmUl 8 50UtranCell=Iub-9-3 usedFreqThresh2dEcno -12 -13UtranCell=Iub-9-3 usedFreqThresh2dRscp -100 -105====================================================================================================





Checking that the attribute values are within range specified in MOM ("momr")...all values OK.

Format of a reference file

**:ws4264@~> less moshell/commonjars/pm/PARAM_RNC_G_1_0.txt#Recommended Parameter Settings for RNC, URAN 5.0 #Document Number: 3/190 59-HSD 101 02/5#Revision: K#Delivery Package RAN 5.0.23#Delivery Date: 20/12/2007#Based on MOM rev.: "R8Y01 (MIM G.5.30), including RNC rev AE4 and Cello 5.1.2.28 32/1551-AXD 105 03/1 rev Y43"

#MO Class Name/Identity Parameter Name Recommended ValueAal1TpVccTp partialFill 47Aal2Ap timerErq 5000Aal2Ap timerRel 2000Aal2PathVccTp timerCu 10Aal2QosCodePointProfile qualityOfServiceCodePointA 128Aal2QosCodePointProfile qualityOfServiceCodePointB 129Aal2QosCodePointProfile qualityOfServiceCodePointC 130Aal2QosCodePointProfile qualityOfServiceCodePointD 131Aal2QosProfile profileClassA.boundOnNodeDelay 10000Aal2QosProfile profileClassA.boundOnProbOfDelay 500000Aal2QosProfile profileClassA.boundOnProbOfLoss 500000Aal2QosProfile profileClassB.boundOnNodeDelay 20000Aal2QosProfile profileClassB.boundOnProbOfDelay 500000

The reference file can support pattern matching on the MO:

Example: this reference value applies for all MOs whose LDN match the sting “Aal2PathVccTp=c.*$”

~Aal2PathVccTp=c.*$ timerCu 3

The reference file can support several reference values:


Example: this MO has three possible recommended values:

Aal1TpVccTp partialFill 47,50,53

11.2.3 Offline check

First take the dump from moshell online, using the command “dcgk”.

Then from moshell offline, run:

OFFLINE> dif f modumps/RNC11/090325_114224/RNC11_modump.zip

unzip - ojq modumps/RNC11/090325_114224/RNC11_modump.zip - d /home/eanzmagn/moshel l_ logf i l es / logs_moshel l / tempfi les /20090325-122933_25099/di f fdump

Found MO dump: /home/eanzmagn/moshel l_ logf i l es / logs_moshel l / tempfi les /20090325-122933_25099/di f fdump/RNC11_dcg_k. log.gz

Parsing MOM (cached): /home/eanzmagn/jarxml/RNC_NODE_MODEL_G_5_30.xml.cache.gz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Done.Using paramfi le /home/eanzmagn/moshel l /commonjars/pm/PARAM_RNC_G_1_0.txtParsing f i le Parsing f i le /home/eanzmagn/moshel l_ logf i l es / logs_moshel l / tempfi les /20090325-122933_25099/di f fdump/RNC11_dcg_k. log.gz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

====================================================================================================MO Attribute CurrentValue ReferenceValue====================================================================================================Aal2QosProfile=ad8 profileClassA.boundOnNodeDelay 8000 10000Aal2QosProfile=ad8 profileClassB.boundOnNodeDelay 15000 20000ChannelSwitching=1 downswitchTimerSp 60 2ChannelSwitching=1 inactivityTimer 120 30ChannelSwitching=1 ulThroughputAllowUpswitchThreshold 90 0Ip=1 workingMode 1(ROUTER_MODE) 1(ROUTERMODE)Ip=1,IpAtmLink=b125ia monitorInterval 10 60Ip=1,IpAtmLink=b238ia monitorInterval 10 60IubLink=1001 beMarginDlHw 10 0IubLink=1001 beMarginUlHw 10 0IubLink=1001 dlHwAdm 70 100


IubLink=1001 ulHwAdm 70 100IubLink=1002 beMarginDlHw 10 0IubLink=1002 beMarginUlHw 10 0IubLink=1002 dlHwAdm 70 100IubLink=1002 ulHwAdm 70 100ManagedElementData=1 ntpServiceActivePrimary true falseManagedElementData=1 ntpServiceActiveSecondary true falseMtp3bSpItu=1 noOfCongestLevelForNI 1 3Mtp3bSpItu=1 transFrHandler 0 (IGNORED) 1 (HANDLE_AS_TFA)NniSaalProfile=win100 profileData.mps 0 2NniSaalProfile=win250 profileData.mps 0 2PowerControl=1 edpcchGainFactorUlTti10 2 0PowerControl=1 edpdchGainFactorUlTti10Tf2 18 16PowerControl=1 edpdchGainFactorUlTti10Tf4 20 21RncFunction=1 noOfCountersAllowed 1700000 "1200000: With GPB43 (R4 HW) or later on the O&M boardRncFunction=1 puncturingLimitUlTti10 44 84SccpSp=1,SccpScrc=1,SccpApLocal=1 useS1 false trueSccpSp=1,SccpScrc=1,SccpApLocal=rs useS1 false trueSctp=1 associationMaxRtx 2 4Sid=1 sib1.sib1StartPos 2 4Sid=1 sib12.sib12RepPeriod 64 32Sid=1 sib12.sib12StartPos 18 14Sid=1 sib2.sib2StartPos 14 118Sid=1 sib3.sib3RepPeriod 32 16Sid=1 sib3.sib3StartPos 4 2Sid=1 sib7.sib7RepPeriod 64 16Sid=1 sib7.sib7StartPos 18 2Subrack=MS,Slot=25,PlugInUnit=1,EtMfg=1,GigaBitEthernet=1 switchBackTimer 10 30Subrack=MS,Slot=7,PlugInUnit=1,EtMfg=1,GigaBitEthernet=1 switchBackTimer 10 30UeMeasControl=1 nonUsedFreqThresh4_2bEcno -11 -9UeMeasControl=1 nonUsedFreqThresh4_2bRscp -94 -95UeMeasControl=1 usedFreqRelThresh2fEcno 1 2UeMeasControl=1 usedFreqThresh2dRscpDrnc -97 -100UeRc=1,UeRcRb=2 ueReceivingWindowSize 5 3UeRc=1,UeRcRb=2 ueTransmissionWindowSize 5 3UeRc=1,UeRcRb=3 ueReceivingWindowSize 5 3UeRc=1,UeRcRb=4 ueReceivingWindowSize 5 3UeRc=10,UeRcRb=2 ueReceivingWindowSize 5 3UeRc=10,UeRcRb=2 ueTransmissionWindowSize 5 3UeRc=10,UeRcRb=3 ueReceivingWindowSize 5 3UeRc=10,UeRcRb=4 ueReceivingWindowSize 5 3....UeRc=9,UeRcRb=3 ueReceivingWindowSize 5 3UeRc=9,UeRcRb=4 ueReceivingWindowSize 5 3UtranCell=cell3711 beMarginDlCode 2 1


UtranCell=cell3711 dlCodeAdm 70 80UtranCell=cell3711 usedFreqThresh2dRscp -97 -100UtranCell=cell3711,Hsdsch=1 deltaAck1 4 5UtranCell=cell3711,Hsdsch=1 deltaAck2 8 7UtranCell=cell3711,Hsdsch=1 deltaCqi2 8 6....====================================================================================================

Saved result in csv format: /home/eanzmagn/moshell_logfiles/logs_moshell/diff/rnc37/20060708/213821_18721/RNC37.csv ($diffcsvfile)

Created command file to correct differences: /home/eanzmagn/moshell_logfiles/logs_moshell/diff/rnc37/20060708/213821_18721/RNC37.cmd ($diffcmdfile)


11.2.4 Anlyse results and correct discrepancies

Two files are produced, one CSV file showing the discrepancies and one command file which can be run with the “run” command to set the parameters to their correct value.The commmand file is in moshell format but can be converted to EMAS format by doing u!

OFFLINE> l cat $diffcsvfile

MO;Attribute;CurrentValue;ReferenceValueAal2QosProfile=ad8;profileClassA.boundOnNodeDelay;8000;10000Aal2QosProfile=ad8;profileClassB.boundOnNodeDelay;15000;20000ChannelSwitching=1;downswitchTimerSp;60;2ChannelSwitching=1;inactivityTimer;120;30ChannelSwitching=1;ulThroughputAllowUpswitchThreshold;90;0Ip=1;workingMode;1 (ROUTER_MODE);1 (ROUTERMODE)Ip=1,IpAtmLink=b125ia;monitorInterval;10;60Ip=1,IpAtmLink=b238ia;monitorInterval;10;60IubLink=1001;beMarginDlHw;10;0IubLink=1001;beMarginUlHw;10;0IubLink=1001;dlHwAdm;70;100IubLink=1001;ulHwAdm;70;100IubLink=1002;beMarginDlHw;10;0IubLink=1002;beMarginUlHw;10;0IubLink=1002;dlHwAdm;70;100IubLink=1002;ulHwAdm;70;100ManagedElementData=1;ntpServiceActivePrimary;true;false


ManagedElementData=1;ntpServiceActiveSecondary;true;falseMtp3bSpItu=1;noOfCongestLevelForNI;1;3Mtp3bSpItu=1;transFrHandler;0 (IGNORED);1 (HANDLE_AS_TFA)NniSaalProfile=win100;profileData.mps;0;2NniSaalProfile=win250;profileData.mps;0;2PowerControl=1;edpcchGainFactorUlTti10;2;0PowerControl=1;edpdchGainFactorUlTti10Tf2;18;16PowerControl=1;edpdchGainFactorUlTti10Tf4;20;21RncFunction=1;noOfCountersAllowed;1700000;"1200000: With GPB43 (R4 HW) or later on the O&M boardRncFunction=1;puncturingLimitUlTti10;44;84SccpSp=1,SccpScrc=1,SccpApLocal=1;useS1;false;trueSccpSp=1,SccpScrc=1,SccpApLocal=rs;useS1;false;trueSctp=1;associationMaxRtx;2;4Sid=1;sib1.sib1StartPos;2;4Sid=1;sib12.sib12RepPeriod;64;32Sid=1;sib12.sib12StartPos;18;14Sid=1;sib2.sib2StartPos;14;118Sid=1;sib3.sib3RepPeriod;32;16Sid=1;sib3.sib3StartPos;4;2Sid=1;sib7.sib7RepPeriod;64;16Sid=1;sib7.sib7StartPos;18;2Subrack=MS,Slot=25,PlugInUnit=1,EtMfg=1,GigaBitEthernet=1;switchBackTimer;10;30Subrack=MS,Slot=7,PlugInUnit=1,EtMfg=1,GigaBitEthernet=1;switchBackTimer;10;30UeMeasControl=1;nonUsedFreqThresh4_2bEcno;-11;-9UeMeasControl=1;nonUsedFreqThresh4_2bRscp;-94;-95UeMeasControl=1;usedFreqRelThresh2fEcno;1;2UeMeasControl=1;usedFreqThresh2dRscpDrnc;-97;-100UeRc=1,UeRcRb=2;ueReceivingWindowSize;5;3UeRc=1,UeRcRb=2;ueTransmissionWindowSize;5;3UeRc=1,UeRcRb=3;ueReceivingWindowSize;5;3UeRc=1,UeRcRb=4;ueReceivingWindowSize;5;3UeRc=10,UeRcRb=2;ueReceivingWindowSize;5;3UeRc=10,UeRcRb=2;ueTransmissionWindowSize;5;3UeRc=10,UeRcRb=3;ueReceivingWindowSize;5;3....UeRc=8,UeRcRb=2;ueTransmissionWindowSize;5;3UeRc=8,UeRcRb=3;ueReceivingWindowSize;5;3UeRc=8,UeRcRb=4;ueReceivingWindowSize;5;3UeRc=9,UeRcRb=2;ueReceivingWindowSize;5;3UeRc=9,UeRcRb=2;ueTransmissionWindowSize;5;3UeRc=9,UeRcRb=3;ueReceivingWindowSize;5;3UeRc=9,UeRcRb=4;ueReceivingWindowSize;5;3UtranCell=cell3711;beMarginDlCode;2;1UtranCell=cell3711;dlCodeAdm;70;80UtranCell=cell3711;usedFreqThresh2dRscp;-97;-100


UtranCell=cell3711,Hsdsch=1;deltaAck1;4;5UtranCell=cell3711,Hsdsch=1;deltaAck2;8;7UtranCell=cell3711,Hsdsch=1;deltaCqi2;8;6.....

OFFLINE> l cat $diffcmdfile

lt allgs+confb+

lset Aal2QosProfile=ad8$ profileClassA boundOnNodeDelay=10000lset Aal2QosProfile=ad8$ profileClassB boundOnNodeDelay=20000lset ChannelSwitching=1$ downswitchTimerSp 2lset ChannelSwitching=1$ inactivityTimer 30lset ChannelSwitching=1$ ulThroughputAllowUpswitchThreshold 0lset Ip=1$ workingMode 1lset Ip=1,IpAtmLink=b125ia$ monitorInterval 60lset Ip=1,IpAtmLink=b238ia$ monitorInterval 60lset IubLink=1001$ beMarginDlHw 0lset IubLink=1001$ beMarginUlHw 0lset IubLink=1001$ dlHwAdm 100lset IubLink=1001$ ulHwAdm 100lset IubLink=1002$ beMarginDlHw 0lset IubLink=1002$ beMarginUlHw 0lset IubLink=1002$ dlHwAdm 100lset IubLink=1002$ ulHwAdm 100lset ManagedElementData=1$ ntpServiceActivePrimary falselset ManagedElementData=1$ ntpServiceActiveSecondary falselset Mtp3bSpItu=1$ noOfCongestLevelForNI 3lset Mtp3bSpItu=1$ transFrHandler 1lset NniSaalProfile=win100$ profileData mps=2lset NniSaalProfile=win250$ profileData mps=2lset PowerControl=1$ edpcchGainFactorUlTti10 0lset PowerControl=1$ edpdchGainFactorUlTti10Tf2 16lset PowerControl=1$ edpdchGainFactorUlTti10Tf4 21lset RncFunction=1$ noOfCountersAllowed "1200000: With GPB43 (R4 HW) or later on the O&M boardlset RncFunction=1$ puncturingLimitUlTti10 84lset SccpSp=1,SccpScrc=1,SccpApLocal=1$ useS1 truelset SccpSp=1,SccpScrc=1,SccpApLocal=rs$ useS1 truelset Sctp=1$ associationMaxRtx 4lset Sid=1$ sib1 sib1StartPos=4lset Sid=1$ sib12 sib12RepPeriod=32lset Sid=1$ sib12 sib12StartPos=14lset Sid=1$ sib2 sib2StartPos=118


lset Sid=1$ sib3 sib3RepPeriod=16lset Sid=1$ sib3 sib3StartPos=2lset Sid=1$ sib7 sib7RepPeriod=16lset Sid=1$ sib7 sib7StartPos=2lset Subrack=MS,Slot=25,PlugInUnit=1,EtMfg=1,GigaBitEthernet=1$ switchBackTimer 30lset Subrack=MS,Slot=7,PlugInUnit=1,EtMfg=1,GigaBitEthernet=1$ switchBackTimer 30lset UeMeasControl=1$ nonUsedFreqThresh4_2bEcno -9lset UeMeasControl=1$ nonUsedFreqThresh4_2bRscp -95lset UeMeasControl=1$ usedFreqRelThresh2fEcno 2lset UeMeasControl=1$ usedFreqThresh2dRscpDrnc -100lset UeRc=1,UeRcRb=2$ ueReceivingWindowSize 3lset UeRc=1,UeRcRb=2$ ueTransmissionWindowSize 3lset UeRc=1,UeRcRb=3$ ueReceivingWindowSize 3...lset UeRc=9,UeRcRb=3$ ueReceivingWindowSize 3lset UeRc=9,UeRcRb=4$ ueReceivingWindowSize 3lset UtranCell=cell3711$ beMarginDlCode 1lset UtranCell=cell3711$ dlCodeAdm 80lset UtranCell=cell3711$ usedFreqThresh2dRscp -100lset UtranCell=cell3711,Hsdsch=1$ deltaAck1 5lset UtranCell=cell3711,Hsdsch=1$ deltaAck2 7lset UtranCell=cell3711,Hsdsch=1$ deltaCqi2 6lset UtranCell=cell3711,Hsdsch=1$ deltaNack1 5lset UtranCell=cell3711,Hsdsch=1$ deltaNack2 7lset UtranCell=cell3711,Hsdsch=1$ hsMeasurementPowerOffset 80....

gs-confb-

The command file can be run with “run” command or converted to EMAS format with “u!” and run with “trun”

11.2.5 Parameter audit on several nodes at once

First take the dumps with mobatch, using the command:

mobatch <sitefile> 'lt all ; kget '

The dumps are stored in a directory, e.g. /path/to/modumps


Then from moshell offline, run:

OFFLINE> diff /path/to/modumps

The result CSV and command files will be stored in a directory, e.g. /path/to/results

To correct the discrepancies, run:

mobatch sitefile /path/to/results

11.3 MO dump comparisons

RNC11> diff modumps/rnc11_kget.log.gz modumps/rnc11_old_kget.log.gz

Parsing file modumps/rnc11_old_kget.log.gz .......................................................................................................................................................Done.Parsing file modumps/rnc11_kget.log.gz ............................................................................................................................................................Done.

========================================================================================================================MO Attribute Value1 Value2========================================================================================================================Aal2RoutingCase=Iub-1 numberDirection 901520004147001 901520004147999...<cut>...UtranCell=Iub-36-3 sf4AdmUl 4 1000UtranCell=Iub-37-1 pwrLoadThresholdDlSpeech.amr12200 1 100UtranCell=Iub-37-1 pwrLoadThresholdDlSpeech.amr7950 0 100UtranCell=Iub-37-1 sf4AdmUl 4 1000UtranCell=Iub-37-2 pwrLoadThresholdDlSpeech.amr12200 1 100========================================================================================================================

====================================================================================================MOs only found in dump 1:====================================================================================================LoadModule=CXC1320742_R51ST01...<cut>...


Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1321447_R51TK01Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1322417/12_R51TC01Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1322812_R51MM01Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1325241/1_R51NK01Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1327705_R51SZ01Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1720925_R51SX03UpgradePackage=CXP9012014_R10AY/7UpgradePackage=CXP9012014_R10CDUpgradePackage=CXP9012014_R10CJ

====================================================================================================MOs only found in dump 2:====================================================================================================LoadModule=CXC1320742_R51MH01LoadModule=CXC1320781_R51MH01...<cut>...Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1327705_R51LX02Subrack=MS,Slot=9,PlugInUnit=1,Program=CXC1720925_R51MA03UpgradePackage=CXP9012014_R10BCUpgradePackage=Virtual_1_of_CXP9012123_R6F01UpgradePackage=Virtual_4_of_CXP9012123_R4C15UtranCell=Iub-5-2,Hsdsch=1,Eul=1UtranCell=Iub-5-3,Hsdsch=1,Eul=1

====================================================================================================Attributes only found in dump 1:====================================================================================================ManagedElementData=1 ntpBurstFlagThird falseManagedElementData=1 ntpMaxPollThird 0ManagedElementData=1 ntpMinPollThird 0ManagedElementData=1 ntpServerAddressThirdManagedElementData=1 ntpServiceActiveThird falseUpgradePackage=CXP9012014_R10AT Action Action update supported: falseUpgradePackage=CXP9012014_R10AT Detailed Detailed info:UpgradePackage=CXP9012014_R9AM04 Action Action update supported: falseUpgradePackage=CXP9012014_R9AM04 Detailed Detailed info:

====================================================================================================Attributes only found in dump 2:


====================================================================================================UpgradePackage=CXP9012014_R10AT Connected Connected to PiuType with product revision: R2

Saved result in csv format: /home/eanzmagn/moshell_logfiles/logs_moshell/diff/20081128/kget.log.gz_115957.csv ($diffcsvfile)

Created command file to align parameters in dump 1 against values of dump 2: /net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/diff/20100308/kget.log.gz_173828.mos ($diffcmdfile)


RNC11> ! cat $diffcmdfile

#DoNotEditThisLine: DiffCmdFile 137.58.194.147 8.0b RNC_NODE_MODEL_G_5_30_COMPLETE stopfile=/tmp/10812

#Command file for comparison of modump: modumps/rnc11/kget.log.gz against modump: modumps/rnc11/old/kget.log#Comparison done on 100308-173828

lt allgs+confb+

lset Aal2PathVccTp=Iub-10-39$ timerCu 10lset Aal2RoutingCase=Iub-1$ numberDirection 901520004147999....lset UtranCell=Iub-9-1$ pwrLoadThresholdDlSpeech amr7950=100lset UtranCell=Iub-9-1$ sf4AdmUl 1000lset UtranCell=Iub-9-2$ pwrLoadThresholdDlSpeech amr12200=100lset UtranCell=Iub-9-2$ pwrLoadThresholdDlSpeech amr7950=100lset UtranCell=Iub-9-2$ sf4AdmUl 1000lset UtranCell=Iub-9-3$ pwrLoadThresholdDlSpeech amr12200=100lset UtranCell=Iub-9-3$ pwrLoadThresholdDlSpeech amr7950=100lset UtranCell=Iub-9-3$ sf4AdmUl 1000

gs-confb-

11.4 Individual MO comparisons

RNC11> pr iublink=iub-1[012]

===================================================================================


Proxy MO=================================================================================== 5488 RncFunction=1,IubLink=Iub-10 6088 RncFunction=1,IubLink=Iub-12 8674 RncFunction=1,IubLink=Iub-11===================================================================================Total: 3 MOs

RNC11> diff 5488 6088 8674

=====================================================================================================MO IubLink=Iub-10 IubLink=Iub-12 IubLink=Iub-11=====================================================================================================rbsId 10 12 11froId 18 22 20userLabel Iub-10 Iub-12 Iub-11reservedBy [3] = [3] = [3] = IubLinkId Iub-10 Iub-12 Iub-11=====================================================================================================

12 CPP O&M INTERFACE

12.1 O&M security


CPP NODE

OSE shell (COLI)

File system

MIB

CM (Configuration Mgmt) FM (Fault Mgmt) PM (Performance Mgmt)

HTTP (80) FTP (21) / SFTP (22)

TELNET (23) / SSH (22)

IIOP (56834)

/ SSL IOP (56836)

TCP/IP

Ethernet or IPoverATM

MoShell/ AMOS

Scanners

12.1.1 Security Level 1: no O&M security

- COLI interface supports both telnet and ssh. All users use the same password.- File transfer interface supports both ftp and sftp. All users use the same password.- MO/PM interface only supports unsecure corba (IIOP), there is no authentication

RNC11> secmode -s

$ secmode -s

Security configuration settings:Access method Current security mode--------------------------------------------------------------TelnetFtpServers unsecure, node internal Telnet and FTP servers are ON. (telnet/ftp and ssh/sftp allowed)CorbaSecuri ty unsecure, corba securi ty is OFF. (unsecure corba, TCP port 56834)OperationalSecLevel level 1ConfiguredSecLevel level 1


--End settings------------------------------------------------

12.1.2 Security Level 2: corba security, no user id control

- COLI interface supports both telnet and ssh. All users use the same password.- File transfer interface supports both ftp and sftp. All users use the same password.Note: in some cases telnet/ftp might be blocked (the security administrator will decide this)- MO/PM interface only supports secure corba (SSLIIOP), there is authentication via credential file. The credential file does not need to contain the userid, therefore we can use an anonymous credential called “Stand-alone mode” credential. The file name is “sam.pbe” and we download it manually from the Single Logon Server (SLS).

RNC11> secmode -s

$ secmode -s

Security configuration settings:Access method Current security mode--------------------------------------------------------------TelnetFtpServers unsecure, node internal Telnet and FTP servers are ON. (telnet/ftp and ssh/sftp allowed)CorbaSecuri ty secure, corba securi ty is ON. (secure corba, TCP port 56836)OperationalSecLevel level 2ConfiguredSecLevel level 2

--End settings------------------------------------------------$

For connecting with corba security level 2, the following moshell uservariable values are required:- corba_class=3- sa_credential=(path to sam.pbe file on server)- sa_password=(password of the file, specified when downloading the file from SLS)In case telnet/ftp are blocked, the following settings are also needed:- secure_shell=1- secure_ftp=1

Example:


moshell -v corba_class=3,sa_credential=/path/to/sam.pbe,sa_password=pw_for_file <ipaddress>

12.1.3 Security Level 3: corba security, user id control

- COLI interface only supports ssh. Each user has their own password- File transfer interface only supports sftp. Each user has their own passwordNote: in some cases telnet/ftp might be allowed (the security administrator will decide this)- MO/PM interface only supports secure corba (SSLIIOP), there is authentication via credential file. The credential file must contain the userid, therefore we must use a credential called “Network mode” credential. The file name is “ssucredentials.xml” and is automatically downloaded by moshell from the Single Logon Server (SLS).

RNC11> secmode -s

$ secmode -s

Security configuration settings:Access method Current security mode--------------------------------------------------------------

TelnetFtpServers secure, node internal Telnet and FTP servers are OFF. (only ssh/sftp allowed)CorbaSecuri ty secure, corba secur i ty is ON. (secure corba, TCP port 56836)OperationalSecLevel level 3ConfiguredSecLevel level 3

--End settings------------------------------------------------$

For connecting with corba security level 3, the following moshell uservariable values are required:- corba_class=4- sls_username=(the userid for SLS login)- username=(the userid for COLI and file transfer login)Optional:- sls_urls=(the URL(s) of the SLS, usually read from the node directly)In case telnet/ftp are blocked, the following settings are also needed:- secure_shell=1- secure_ftp=1

Example:Finn Magnusson 2011-07-10 rev PA36 503/527)

moshell -v corba_class=4,sls_username=<sls_user>,username=<node_user>,secure_shell=1,secure_ftp=1 <ipaddress>

12.1.4 Changing security settings on the node

Examples:- Block telnet/ftp: secmode -t s- Allow telnet/ftp: secmode -t u- Bring the node to security level 1: secmode -l 1- Put all protocols in unsecure mode: secmode -a u

For more details, refer to CPP O&M chapter in “Moshell advanced” document and moshell UG.

12.2 O&M connectivity problems

12.2.1 Tracing on the O&M interface

Print help of the dumpcap command

ENB11> man dumpcap

$ man dumpcapdumpcap(1) Shell Command dumpcap(1)

Name dumpcap - dump O&M network traffic

Synopsis dumpcap -h

dumpcap -D

dumpcap -Q

dumpcap - S

dumpcap -v


dumpcap [-a <stopcondition> ] [-i <interface> ]

[-s <snaplen> ] [-w <name> ] [ -o ]

Description This command activates a tool that records (captures) packet data from network traffic and dumps the data on file. The file format is libpcap format, which is also the format used by Ethereal, tcpdump and various other tools.

If no options are set, the tool records traffic from the first available O&M network interface and writes the received raw packet data, together with the time stamps for the packets, into a libpcap file. The file format is described in http://wiki.ethereal.com/Development/LibpcapFileFormat .

If the -w option is not specified, dumpcap writes to one or more new libpcap files in the default subdirectory of the recording root path. If the -w option is specified, dumpcap writes to files in a subdirectory of the recording root path specified by that option. The root path for recording files is: /d/logfiles/sniffer .

dumpcap has default configurations, if options are not given explicitly when entering the command. Default configurations are: dumpcap-aduration:900-ile0-wdefault .

If a recording on the any interface is specified, all available interfaces are selected. These interfaces can be displayed with the -D option.

Ethernet and IP over ATM packets are recorded in separate files: eth.pcap and atm.pcap .

dumpcap has a fixed disk quota as a limit for all saved recording files together, and which cannot normally be exceeded. With the restricted option -F , the quota limit can be overridden and recording files with a size specified with the -a option can be created.

Limitations - The capacity of IP O&M traffic is reduced, when dumpcap is activated.

- Promiscuous mode is not supported.

- Gratuitous ARPs originated from a lower layer are not shown inFinn Magnusson 2011-07-10 rev PA36 505/527)

recordings.

- The source MAC address in originating Ethernet packages is not set in recordings.

- Only one dumpcap recording at a time can be activated.

- An activated recording is not saved on disk, if a node, board or program restart occurs.

Subcommands None.

Options -a <stop condition> Specifies a criterion for when dumpcap is to stop writing to a recording file. The criterion is of the form, test : value , where test is one of:

duration: value . Stop writing to recording files after value seconds have elapsed.

filesize: value . Stop writing to recording files after one of them reaches a size of value kilobytes.

-D Prints a list of the interfaces on which dumpcap can record. For each network interface, an interface name is printed. The interface name can be specified using the -i option.

-F Turns off the check of disk quota for a recording. This option has restricted usage.

-h Prints the version of the command, and options.

-i <interface> Sets the name of the network interface to be used for recording of packets. Network interface names must match one of the names listed in dumpcap -D .

If no interface is specified, dumpcap searches the list of interfaces, and chooses the first interface.

-o Enables overwriting of existing recording files. Existing files created in an earlier recording are then deleted before the new


recording is started.

-Q Ends an active recording. Recordings both started from a shell, and automatically at startup (by setting the runOnce key in the configuration file) are ended with this option.

-s <snaplen> Sets the default snapshot length to be used when recording data. No more than snaplen bytes of each network packet will be saved to disk.

-S Examines the status of an active recording. Information about: the name of the active recording, the time when the recording was started, the number of recorded packets, the total file size of recorded data, and options used when the recording was started, are printed out.

-v Prints the version of the command.

-w <name> Writes raw packet data to specified files, eth.pcap and atm.pcap , in the directory /d/logfiles/sniffer/<name> .

Operands None.

Files pcap.cfg Use of dumpcap does not need to be configured, but in some situations, it can be convenient to change the default setting of the command. For this reason, the file pcap.cfg is examined each time the command is started. The key qualifier can be set, to change the default configuration of the command.

The configuration file is also examined each time the O&M IP stack is started. In this case, the key runOnce is read. If this key is set to 1 , a dumpcap recording starts up once automatically after a startup, that is after a node restart, a board restart or a restart of the O&M IP stack. dumpcap then changes the runOnce key value to 0 .

It is possible to change settings by creating and copying a file pcap.cfg to the directory /c/sniffer/ .


Example:

-----/c/sniffer/pcap.cfg---- [dumpcap] qualifier=-a duration:9000 -i any -w pcap runOnce=1 -------------------

Printout See the examples.

Diagnostics None.

Examples Start a recording on all interfaces.

$ dumpcap -i any dumpcap started on all interfaces Dump is stored in 001000!/d/logfiles/sniffer/default/eth.cap and /d/logfiles/sniffer/default/atm.cap

Show the status of an active recording.

$ dumpcap -S dumpcap with name default is active STARTED: 2008-01-30 14:30.22 PACKETS: 47 SIZE: 3855 PARAM: -w default -i any -a duration:900 -o

Stop an active recording.

$ dumpcap -Q


Active dumpcap command is ended.

See also See also pcapexplorer command.

Copyright (c) Copyright Ericsson AB 2008. All rights reserved.

7/19080-CNX 901 1128 2008-01-29 dumpcap(1)$

Start the O&M tracing

ENB11> dumpcap -i any -o

$ dumpcap -i any -o

dumpcap started on all interfacesDump is stored in 000100!/d/logfiles/sniffer/default/eth.cap, /d/logfiles/sniffer/default/atm.cap and /d/logfiles/sniffer/default/hl.cap$

Check O&M trace status

ENB11> dumpcap -S

$ dumpcap -S

dumpcap with name default is ongoing

STARTED: 2011-05-09 12:17.14PACKETS: 35SIZE: 41189PARAM: -w default -i any -a duration:900 -o

perform O&M operations

.......

Stop O&M tracing

ENB11> dumcap -Q


$ dumpcap -Q

Active dumpcap command is ended.$

Fetch the relevant logs

ENB11> ftree /d/logfiles/sniffer/default

/d/logfiles/sniffer/default/-rw-rw-rw- 24 9 May 2011 11:39:38 /d/logfiles/sniffer/default/atm.cap-rw-rw-rw- 7322 9 May 2011 11:40:20 /d/logfiles/sniffer/default/eth.cap-rw-rw-rw- 46284 9 May 2011 11:40:20 /d/logfiles/sniffer/default/hl.cap

ENB11> ftget /d/logfiles/sniffer/default

get /d/logfiles/sniffer/default/atm.cap ./default/atm.cap ... OKget /d/logfiles/sniffer/default/eth.cap ./default/eth.cap ... OKget /d/logfiles/sniffer/default/hl.cap ./default/hl.cap ... OK

Open the “.cap” files in Wireshark:


12.2.2 Case 1: moshell hangs at “Trying file=....”

Symptom:


RNC10> lt all

Checking MOM version...RNC_NODE_MODEL_G_1_4Using MOM version: RNC_NODE_MODEL_G_1_4_COMPLETEParsing MOM (cached): /home/eanzmagn/moshell/jarxml/RNC_NODE_MODEL_G_1_4_COMPLETE.xml.cache .................................Done.Fetching IOR file...Done.**** Welcome to the Simple Mo Browser (version 3.0)!Trying file=/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20061130-094222_6050/ior6050

Possible cause: JVM ran out of memory

RNC10> lh ommp jheapinfo

$ lhsh 001200 jheapinfoJava Heap InformationTotal size: 204800000Total used: 204700134Total used high water-mark: 20470593$

==> Try to restart the JVM

RNC11> lh ommp sma -all

$ lhsh 001200 sma -all

Tue Dec 11 20:19:53 2007 Root Pid Load Module ---------- ----------------------0x0001024f CXC1329861_R10AV03 (RncLmCenOm)0x0001014c CXC1329860_R10AY01 (RncLmFro)0x0002012c CXC1321344_R51EL02 (pms)0x00010121 CXC1320784_R51LX04 (jvm)0x00020113 CXC1320783_R51LX02 (http_server)0x000100e2 CXC1322506_R51LX02 (iputil)0x000200dd CXC1322506_R51LX02 (iputil)0x000200f1 CXC1322705_R51LX02 (xpm)0x000100ed CXC1323464_R51LX02 (objectsuppor)0x000100eb CXC1323464_R51LX02 (objectsuppor)0x000200e6 CXC1323464_R51LX02 (objectsuppor)


0x000100ec CXC1323464_R51LX02 (objectsuppor)0x000100ee CXC1323464_R51LX02 (objectsuppor)

Load Module RPU State Mode Container ID ReplNoOfRecs RecSize SnapSeq PeerSmnApn--------------------------- ----- ----- ------------------------------------------- ------- ------- ----------CXC1329861_R10AV03 49 Activ A_w_S - - - - - ( 0, 13) (RncLmCenOm)CXC1329860_R10AY01 48 Activ A_w_S - - - - - ( 0, 13) (RncLmFro)CXC1322705_R51LX02 47 Activ A_w_S - - - - - ( 0, 13) (xpm)CXC1323464_R51LX02 46 Activ A_w_S LSI_CLI_CONTAINER Yes 1 20 0 ( 0, 13) (objectsuppor) 46 Activ A_w_S OSD_CLI_CONTAINER Yes 300 24 0 ( 0, 13)CXC1321344_R51EL02 45 Activ A_w_S - - - - - ( 0, 13) (pms)CXC1322506_R51LX02 7 Activ A_w_S - - - - - ( 0, 13) (iputil)CXC1320784_R51LX04 6 Activ A_w_S - - - - - ( 0, 13) (jvm)CXC1320783_R51LX02 5 Activ A_w_S - - - - - ( 0, 13) (http_server)

$

RNC11> lh ommp proglist

1 run CXC1320787_R51SZ01 (SystemManage) 2 run CXC1322506_R51SZ01 (iputil) 3 run CXC1323464_R51SZ01 (objectsuppor) 4 run CXC1322705_R51SZ01 (xpm) 5 run CXC1321314_R51SZ01 (sock) 6 run CXC1321316_R51SZ01 (ethernet) 7 run CXC1327705_R51SZ01 (dbagent) 8 run CXC1320742_R51SZ01 (spas_connect) 9 run CXC1320783_R51SZ01 (http_server) 10 run CXC1320784_R51SZ01 (jvm) 11 run CXC1321121_R51GD01 (nsssyci_mpbp) 12 run CXC1321344_R51EL02 (pms) 13 run CXC1329860_R10CD01 (RncLmFro) 14 run CXC1329861_R10CC01 (RncLmCenOm)

RNC11> lhsh 001200 progkill jvm

$ echo Killing program CXC1320784_R51SZ01Killing program CXC1320784_R51SZ01$ lhsh 001200 pgkill 10$

==> Or restart the JVM boardFinn Magnusson 2011-07-10 rev PA36 513/527)

RNC10> lhsh 001200 reload

$ lhsh 001200 reload

Note: the memory settings can be found in:

RNC10> get jvm= admoptions

=================================================================================================================MO Attribute Value=================================================================================================================Jvm=1 admOptions s[3] = Xms200000k Dhttp.root=/c/public_html Dse_ericsson_security_PropertyFileLocation=/c/java/SecurityManagement.prp =================================================================================================================Total: 1 MOs

RNC10> sql select id,jvm_option from jvmfro_r1

$ sqlcselect id,jvm_option from jvmfro_r1;Note! Have you allocated enough of heap memory to the loadmodule:CXC1325608 to be able to run SQLC in the way you want??

Note! CTRL+C is not supported!!!

Component sqlc (V04.03.0034/OSE)Copyright (C) 1994-2005 by Polyhedra Ltd

+------+----------------------------------------------------------------------------------------------------------------------+| id | jvm_option |+------+----------------------------------------------------------------------------------------------------------------------+| 0 | '-Xms200000k -Dhttp.root=/c/public_html -Dse_ericsson_security_PropertyFileLocation=/c/java/SecurityManagement.prp ' |+------+----------------------------------------------------------------------------------------------------------------------+Query Done: 1 record selectedSQL> exit;$


12.2.3 Case 2: CORBA.COMM_FAILURE

Symptom:

RNC11> lt all

Checking MOM version...RNC_NODE_MODEL_G_1_4Using MOM version: RNC_NODE_MODEL_G_1_4_COMPLETEParsing MOM (cached): /home/eanzmagn/moshell/jarxml/RNC_NODE_MODEL_G_1_4_COMPLETE.xml.cache .................................Done.Fetching IOR file...Done.Connecting to 137.58.194.147:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0, jacoms=R71BC08, jacorb=R72M01, jacsec=R71BC07)**** Welcome to the Simple Mo Browser (version 3.0)!Trying file=/net/rncweb/export/share4/RNC/LOG_SERVER/rnciov/PV/eanzmagn/logs_moshell/tempfiles/20100317-070339_30071/ior30071org.omg.CORBA.COMM_FAILURE: vmcid: 0x0 minor code: 0 completed: Maybe at org.jacorb.orb.giop.ReplyPlaceholder.getInputStream(ReplyPlaceholder.java:130) at org.jacorb.orb.ReplyReceiver.getReply(ReplyReceiver.java:331) at org.jacorb.orb.Delegate._invoke_internal(Delegate.java:1639) at org.jacorb.orb.Delegate.invoke_internal(Delegate.java:1385) at org.jacorb.orb.Delegate.invoke(Delegate.java:1373) at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457) at org.omg.CosNaming._NamingContextStub.resolve(_NamingContextStub.java:244) at e.<init>(Unknown Source) at se.ericsson.cello.configtestclient.SimpleMoBrowser.<init>(Unknown Source) at se.ericsson.cello.configtestclient.SimpleMoBrowser.main(Unknown Source)org.omg.CORBA.COMM_FAILURE: vmcid: 0x0 minor code: 0 completed: Maybe

Possible cause: Too many open corba sessions

===> reduce the number of client sessions that are currently connected to the node.

Maximum number of connections on the MO/PM service : 30.Maximum number of subscriptions to MO notifications: 25.Maximum number of subscriptions to Alarm/Event notifications: 25.

Print number of connections on MO/PM service:

RNC11> lgw

Startdate=19661031.151320, Enddate=20100122.155447Parsing sysLog...................Done.Parsing securityLog...Done.


................Nr of active O&M connections on 2010-01-21 at 15:54:55: 18================================================================================================ConnType Origin ActiveSince Duration================================================================================================Corba:56834 150.132.34.224:52573 2010-01-21 12:20:17 12878s (3h34m38s)Corba:56834 150.132.34.239:33515 2010-01-21 13:52:26 7349s (2h02m29s)Corba:56834 150.132.92.194:54718 2010-01-21 13:57:11 7064s (1h57m44s)Corba:56834 150.132.34.239:35799 2010-01-21 14:13:05 6110s (1h41m50s)Corba:56834 150.132.83.6:59620 2010-01-21 14:40:16 4479s (1h14m39s)Corba:56834 150.132.34.239:38789 2010-01-21 14:49:53 3902s (1h05m02s)Corba:56834 150.132.83.8:51635 2010-01-21 14:52:08 3767s (1h02m47s)Corba:56834 150.132.34.224:56141 2010-01-21 15:02:31 3144s (52m24s)Corba:56834 150.132.83.8:49204 2010-01-21 15:07:17 2858s (47m38s)Corba:56834 150.132.34.239:42245 2010-01-21 15:12:34 2541s (42m21s)Corba:56834 150.132.34.224:56436 2010-01-21 15:13:18 2497s (41m37s)Corba:56834 150.132.34.226:55994 2010-01-21 15:27:57 1618s (26m58s)Corba:56834 150.132.34.226:56006 2010-01-21 15:28:12 1603s (26m43s)Ftp 147.214.80.52:34254 Ssh 137.58.218.221:39452 Ssh 147.214.195.156:59908 Telnet 147.214.195.156:41188 Telnet 147.214.195.156:50717 >>> Total: 18 O&M connections (13 Corba, 2 Ssh, 2 Telnet, 1 Ftp)

Print Number of subscriptions to MO notifications.

(Here we see two subscriptions, both coming from ipaddress 137.58.190.44)

RNC26> cat /c/configuration/alarmsubscr.dat | strings | grep IOR

$IOR:000000000000003349444C3A6F6D672E6F72672F436F734E6F74696679436F6D6D2F53657175656E636550757368436F6E73756D65723A312E300000000000010000000000000048000102000000000E3133372E35382E3139302E3434 00A64E00000015323439393437303934322F00144D3F2D4B0F2C4B2E000000000000010000000000000008000000004A414300sq~$IOR:000000000000003349444C3A6F6D672E6F72672F436F734E6F74696679436F6D6D2F53657175656E636550757368436F6E73756D65723A312E300000000000010000000000000048000102000000000E3133372E35382E3139302E3434 00A66000000015313333383031323235322F00144D3F2E212A071816000000000000010000000000000008000000004A414300pppppppp

Print Number of subscriptions to MO notifications.

Here we see no subscriptions


RNC26> cat /c/configuration/cssubscr_r2.dat | strings | grep IOR

12.2.4 Case 3: CORBA.NOT_EXIST

Symptom:

RNC10> lt all

Checking MOM version...RNC_NODE_MODEL_G_1_4Using MOM version: RNC_NODE_MODEL_G_1_4_COMPLETEParsing MOM (cached): /home/eanzmagn/moshell/jarxml/RNC_NODE_MODEL_G_1_4_COMPLETE.xml.cache .................................Done.Fetching IOR file...Done.**** Welcome to the Simple Mo Browser (version 3.0)!Trying file=/home/eanzmagn/moshell_logfiles/logs_moshell/tempfiles/20061130-100121_6471/ior6471org.omg.CORBA.OBJECT_NOT_EXIST: Server-side Exception: null at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:274) at org.jacorb.orb.SystemExceptionHelper.read(SystemExceptionHelper.java:199) at org.jacorb.orb.ReplyReceiver.getReply(ReplyReceiver.java:331) at org.jacorb.orb.Delegate.invoke_internal(Delegate.java:1120) at org.jacorb.orb.Delegate.invoke(Delegate.java:958) at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:76) at org.omg.CosNaming._NamingContextStub.resolve(_NamingContextStub.java:546) at e.<init>(Unknown Source) at se.ericsson.cello.configtestclient.SimpleMoBrowser.<init>(Unknown Source) at se.ericsson.cello.configtestclient.SimpleMoBrowser.main(Unknown Source)MO service not ready, retrying in 10 seconds...

Possible causes:

1) No communication path available to the node’s corba port

Run the ncli command to see if the JVM is up on the node

If you get this printout it means that JVM is down


RNC11> ncli get

$ ncli

NOT ACCEPTEDFailed to connect to NCLI Server.

If you get this printout it means that JVM is up

RNC11> ncli get

$ ncli

[ManagedElement=1]> getLDN ManagedElement=1CHILDREN Equipment=1 EthernetSwitchFabric=1 IpOam=1 IpSystem=1 ManagedElementData=1 RncDeployment=1 RncFunction=1 SwManagement=1 SwitchFabric=1 SystemFunctions=1 TransportNetwork=1END

$

If you get this printout it could mean that ncli is running on the other core MP, try running it on the other MP.

RNC11> ncli get

$ ncliUnknown command 'ncli'.

RNC11> lhsh 001100 ncli get

$ lhsh 001100 ncli

[ManagedElement=1]>


If the JVM is ok, then the fault could be due to lack of communication path between the client and the corba port(s) of the node.

Check if there is connectivity to the corba ports. 0=ok, 1= not ok. Unsecure corba port=56834, secure corba port=56836.

** NONE ** eanzmagn@srld7243:=> moshell/commonjars/nc -z 137.58.194.88 56834;echo $?0** NONE ** eanzmagn@srld7243:=> moshell/commonjars/nc -z 137.58.194.88 56836 ; echo $?1

Common causes for corba ports inaccessible: - NAT is used between the client and the node (NAT is not supported for corba communication) - Firewall blocking some of the ports

2) JVM restart ongoing or failed

First check if JVM is up by running “ncli get”.

If JVM is down:

- Wait a while, it could be that the Jvm is not finished starting up, it can take up to 20 minutes on large RNCs (> 120000 MOs)

- Check the T&E log of the JVM to see if some files could not be loaded by the JVM . It could be java SW files or configuration/security files (host.p12, SecurityManagement.prp)

Example:

RNC01> lh ommp te log read

0012: [2007-04-10 05:40:20.404] se.ericsson.cello.support.debug:main Assert:0 ERROR:Mainjava.lang.NoClassDefFoundError: org.omg.CORBA.ORB

RNC02> lh ommp te log read

0012: [2007-08-24 13:03:45.572] se.ericsson.cello.oms:main Oms:0 ERROR:Failed to start Cello ORB, trying again...org.omg.CORBA.INITIALIZE: Could not find property file /c/security/SecurityManagement.prp


The files needed by the JVM can be viewed with:

RNC11> hget jvm admclass

=================================================================================================================MO admClasspath =================================================================================================================Jvm=1 [12] = LoadModule=CXC1328917_R51LX03 LoadModule=CXC1320960_R51EL13 LoadModule=CXC1323893_R50A01 LoadModule=CXC1329797_R2E01 LoadModule=CXC1320959_R51EL45 LoadModule=CXC1720452_R1C01 LoadModule=CXC1720453_R1C01 LoadModule=CXC1720729_R1F01 LoadModule=CXC1720482_R51EL18 LoadModule=CXC1720327_R51EL13 LoadModule=CXC1323613_R50A01 LoadModule=CXC1329868_R10AT01=================================================================================================================Total: 1 MOs

RNC11> sql select id,jvm_classpath from jvmfro_r1

$ sqlcselect id,jvm_classpath from jvmfro_r1;Note! Have you allocated enough of heap memory to the loadmodule CXC1325608 to be able to run SQLC in the way you want?


Component sqlc (V06.03.0017/OSE4-powerpc)Copyright (C) 1994-2007 by Polyhedra Ltd

+------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+| id | jvm_classpath |+------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+| 0 | '/c/java/CXC1328917_R51LX03.jar:/c/java/CXC1320960_R51EL13.jar:/c/java/CXC1323893_R50A01.jar:/c/java/CXC1329797_R2E01.jar:/c/java/CXC1320959_R51EL45.jar:/c/java/CXC1720452_R1C01.jar:/c/java/CXC1720453_R1C01.jar:/c/java/CXC1720729_R1F01.jar:/c/java/CXC1720482_R51EL18.jar:/c/java/CXC1720327_R51EL13.jar:/c/java/security/CXC1323613_R50A01.jar:/c/java/CXC1329868_R10AT01.jar' |+------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+Query Done: 1 record selectedSQL> exit;


$

RNC11> sql select id,jvm_option from jvmfro_r1

070908-08:59:48 137.58.194.147 7.0p RNC_NODE_MODEL_G_5_28_COMPLETE stopfile=/tmp/25007$ sqlcselect id,jvm_option from jvmfro_r1;Note! Have you allocated enough of heap memory to the loadmodule CXC1325608 to be able to run SQLC in the way you want?


Component sqlc (V06.03.0017/OSE4-powerpc)Copyright (C) 1994-2007 by Polyhedra Ltd

+------+---------------------------------------------------------------------------------------------------------------------+| id | jvm_option |+------+---------------------------------------------------------------------------------------------------------------------+| 0 | '-Xms200000k -Dhttp.root=/c/public_html -Dse_ericsson_security_PropertyFileLocation=/c/java/SecurityManagement.prp -Dse.ericsson.cello.CsNotificationQueueSize=6000 ' |+------+---------------------------------------------------------------------------------------------------------------------+Query Done: 1 record selectedSQL> exit;$

RNC11> ftree /c/java

/c/java/-rw-rw-rw- 8431 1 Jan 1970 03:41:32 /c/java/SecurityManagement.prp-rw-rw-rw- 8431 1 Jan 1970 03:41:32 /c/java/CXC1328917_R51EH05.jar (vls)-rw-rw-rw- 1420349 1 Jan 1970 03:41:34 /c/java/CXC1320960_R51EH01.jar (oms_jar)-rw-rw-rw- 2000 1 Jan 1970 03:41:34 /c/java/CXC1323893_R50A01.jar (Asms)-rw-rw-rw- 37273 1 Jan 1970 03:41:34 /c/java/CXC1329797_R2B02.jar (csu)-rw-rw-rw- 8431 1 Jan 1970 03:41:32 /c/java/host.p12-rw-rw-rw- 3446889 1 Jan 1970 03:41:38 /c/java/CXC1320959_R51EH03.jar (cma_jar)-rw-rw-rw- 3243785 1 Jan 1970 03:41:41 /c/java/CXC1720452_R1A02.jar (jacorb)-rw-rw-rw- 1617708 1 Jan 1970 03:41:42 /c/java/CXC1720453_R1A02.jar (jacorb_sec)-rw-rw-rw- 4446 1 Jan 1970 03:41:42 /c/java/CXC1720729_R1D01.jar (prngcApi)-rw-rw-rw- 319351 1 Jan 1970 03:41:43 /c/java/CXC1720482_R51DT03.jar (ncliserver)-rw-rw-rw- 84757 1 Jan 1970 03:41:43 /c/java/CXC1327582_R51DX01.jar (FrameworkAue)-rw-rw-rw- 17264 1 Jan 1970 03:41:43 /c/java/CXC1324872%4_R51EH01.jar (cma_collect)-rw-rw-rw- 62285 1 Jan 1970 03:41:44 /c/java/CXC1322491%8_R51EH01.jar (cma_conv)-rw-rw-rw- 6208 1 Jan 1970 03:41:44 /c/java/CXC1329353_R51DT02.jar (cma_et_conv)-rw-rw-rw- 199498 1 Jan 1970 03:41:44 /c/java/CXC1720327_R51DT01.jar (cmaserv)-rw-rw-rw- 7514 1 Jan 1970 03:41:45 /c/java/CXC1721350_R51DJ05.jar (lic_rplabel_)-rw-rw-rw- 7293199 1 Jan 1970 03:41:52 /c/java/CXC1329868_R9L04.jar (RncLmMao)


-rw-rw-rw- 191597 1 Jan 1970 03:41:52 /c/java/CXC1329876%12_R1B01.jar (RncLmMaoAue)-rw-rw-rw- 237560 1 Jan 1970 03:41:53 /c/java/CXC1329876%13_R1A01.jar (RncLmMaoAue)-rw-rw-rw- 244854 1 Jan 1970 03:41:53 /c/java/CXC1329876%14_R1A01.jar (RncLmMaoAue)-rw-rw-rw- 33652 1 Jan 1970 03:41:54 /c/java/CXC1329877%12_R1B01.jar (RncLmMoDConv)-rw-rw-rw- 45776 1 Jan 1970 03:41:54 /c/java/CXC1329877%13_R1B01.jar (RncLmMoDConv)-rw-rw-rw- 48811 1 Jan 1970 03:41:54 /c/java/CXC1329877%14_R1A01.jar (RncLmMoDConv)-rw-rw-rw- 2924076 28 Mar 2007 08:39:24 /c/java/CXC1720452_R1B01.jar (jacorb)-rw-rw-rw- 1617688 13 Feb 2007 12:24:12 /c/java/CXC1720453_R1B01.jar (jacorb_sec)-rw-rw-rw- 8427 13 Feb 2007 12:46:51 /c/java/CXC1328917_R51GT03.jar (vls)-rw-rw-rw- 1422373 13 Feb 2007 12:46:53 /c/java/CXC1320960_R51EL05.jar (oms_jar)

drwxrwxrwx 1536 1 Jan 1970 03:41:54 /c/java/install/

drwxrwxrwx 512 26 Mar 2007 08:33:47 /c/java/security/-rw-rw-rw- 1999 7 Mar 2007 12:18:48 /c/java/security/CXC1323613_R50A01.jar (asms)

If the faulty loadmodule is not found, download /c/java from another node (with same SW level), or from the upgrade package ftp server, and transfer it to the faulty node.

Note: If there is no classpath entry in the database (eg when configuring a node from scratch), then all loadmodules located in /c/java are loaded. If the JVM classpath needs to be changed, it is strongly recommended to do this via the “set” command or “pgu” instead of directly into the jvmfro_r1 table as this can cause future upgrades to fail. See example in the paragraphs below (“activating corba security”) .

If the node is using Corba security, make sure that there is a valid /c/java/host.p12 file and that the clock is correct on the node

RNC1> ntpconfig info

$ ntpconfig infoServer 0: 10.0.1.3Result = 3: No secondary server foundNTP synchronized 2006-12-06 01:21:39 NTP no server 2006-12-11 00:35:31 NTP clock stepped 2006-12-06 01:16:22 2006-12-06 01:16:22.817->2006-12-06 01:16:22.816$ RNC1> readclock

$ readclockDate: 2006-12-14 UTC Time: 10:11:24. Thursday$

137.58.194.22> ls -l /c/java/host.p12


$ ls -l /c/java/host.p12-rw-rw-rw- 0 2476 25 Aug 2006 13:25:49 /c/java/host.p12$

12.2.5 Case 4: OSE shell and/or file transfer not accessible

Symptom:

The following error message is printed in moshell:

Unable to connect to <ipaddress>:<port>

It indicates that there is no contact to the TCP port used to access the OSE shell or file transfer protocol. This port can either be:- the telnet port, if secure_shel l=0. The telnet port is defined in the uservariable telnet_port and is set to 23 by default.- the ftp port, if secure_ftp=0. The ftp port is defined in the uservariable ftp_port and is set to 21 by default.- the ssh/sftp port, if secure_shel l=1. The ssh/sftp port is defined in the uservariable secure_port and is set to 22 by default.

Possible causes:

1) Wrong settings in moshell - is security level 3 activated on the node? In this case, the telnet/ftp ports are blocked, so the uservariables secure_shel l and secure_ftp must be set to 1- is the node accessed through RSG with port forwarding? In this case the uservariables telnet_port and/or secure_port must be set accordingly.

2) Too many open telnet/ftp/ssh/sftp sessions

- Maximum number of telnet sessions: 5.- Maximum number of ftp sessions: 5.- Maximum number of ssh/sftp sessions: 5.

Try to close some ongoing sessions or change the setting of the uservariables secure_shel l or secure_ftp to be able to access.

How to check the number of ongoing telnet/ssh/ftp/sftp sessions:

RNC11> lgw

100121-16:54:44 137.58.194.147 8.0 stopfile=/tmp/13373Finn Magnusson 2011-07-10 rev PA36 523/527)

Startdate=19661031.151320, Enddate=20100122.155447Parsing sysLog...................Done.Parsing securityLog...Done.................Nr of active O&M connections on 2010-01-21 at 15:54:55: 18================================================================================================ConnType Origin ActiveSince Duration================================================================================================Corba:56834 150.132.34.224:52573 2010-01-21 12:20:17 12878s (3h34m38s)Corba:56834 150.132.34.239:33515 2010-01-21 13:52:26 7349s (2h02m29s)Corba:56834 150.132.92.194:54718 2010-01-21 13:57:11 7064s (1h57m44s)Corba:56834 150.132.34.239:35799 2010-01-21 14:13:05 6110s (1h41m50s)Corba:56834 150.132.83.6:59620 2010-01-21 14:40:16 4479s (1h14m39s)Corba:56834 150.132.34.239:38789 2010-01-21 14:49:53 3902s (1h05m02s)Corba:56834 150.132.83.8:51635 2010-01-21 14:52:08 3767s (1h02m47s)Corba:56834 150.132.34.224:56141 2010-01-21 15:02:31 3144s (52m24s)Corba:56834 150.132.83.8:49204 2010-01-21 15:07:17 2858s (47m38s)Corba:56834 150.132.34.239:42245 2010-01-21 15:12:34 2541s (42m21s)Corba:56834 150.132.34.224:56436 2010-01-21 15:13:18 2497s (41m37s)Corba:56834 150.132.34.226:55994 2010-01-21 15:27:57 1618s (26m58s)Corba:56834 150.132.34.226:56006 2010-01-21 15:28:12 1603s (26m43s)Ftp 147.214.80.52:34254 Ssh 137.58.218.221:39452 Ssh 147.214.195.156:59908 Telnet 147.214.195.156:41188 Telnet 147.214.195.156:50717 >>> Total: 18 O&M connections (13 Corba, 2 Ssh, 2 Telnet, 1 Ftp)

or:

RNC11> ps | egrep -i ' (sshd|ose)_shell'

000107c9 ose_shell p31 telnet_137.58.19 0 rcv00060273 ose_shell p31 telnet_153.88.12 0 rcv001507b3 ose_shell p31 telnet_153.88.12 0 rcv011e0797 ose_shell p31 telnet_153.88.12 0 rcv000207b7 ose_shell p31 telnet_153.88.12 0 rcv000307dc sshd_shell p30 Osa_secAccess_bl 4 rcv000207da sshd_shell p30 Osa_secAccess_bl 0 rcv000407d3 sshd_shell p30 Osa_secAccess_bl 0 rcv000307d0 sshd_shell p30 Osa_secAccess_bl 0 rcv


RNC11> ps | egrep -i 'sftp|ftpd_'

00090278 ose_ftpd_spawn p31 CelloIaci_telnet 0 rcv002a079e ose_ftpd_spawn p31 CelloIaci_telnet 0 rcv000407c8 ose_ftpd_spawn p31 CelloIaci_telnet 0 rcv001e07ae sftp1_137.58.190.40: p31 Osa_secAccess_bl 33 rcv002107b3 sftp1_137.58.190.40: p31 Osa_secAccess_bl 33 rcv

3) The telnet/ssh server LM is hanging or the node is cyclic restarting

If the MO service is reachable try to restart the ssh program or the node itself (with restart action on the Program MO or ManagedElement MO).

RNC11> proglist | grep ssh

16 run CXC1323911_R61HH05 (ssh)

Otherwise, access the node through RS232 (serial interface).

12.2.6 Case 5: forgotten OSE shell password

In security level 1 and 2, there is a unique shell password, which is the same for all users and can be changed with the “passwd” command.If this password has been forgotten then it will not be possible to run COLI commands or ftp transfers. Only http transfers and MO commands will be possible.

To reset the node password, it is possible to perform the following procedure. Note that it will interrupt traffic.

Open a serial connection to the central MP of the node.

In a separate terminal window, open a moshell session to the node and run the command “acc 0 manualrestart”, this will perform a cold node restart, password is not required to perform this operation since it is over corba.

In the serial terminal, you will see a printout that the central MP is restarting. As soon as you see the printout with board type and revision on the serial port, hit enter. You will get a login prompt, use x as username and password.When you are logged in to the node, type "reload - - ". You will need to do this very fast (ignore any printouts, they do not disrupt the typing).


If you see the line "Login Server Ready", you will have to start over from the node restart.

If you are successful, you should see something like this:

OSE Delta PowerPC/OSE4.4.3 2.8.3Stop due to remain in basic/backup set$

Give the command "mount_c2 " to get access to the /c2 volume, then “rm /c2/security/passwd” After that, you can restart the node with "reload"This will reset the node password to "x".

You can then put back a suitable password by using the passwd command.

12.2.7 Case 6: HTTP not accessible

Symptom:

The following error message is printed in moshell:

Checking MOM version...Failed! Unable to connect to 10.18.14.147:80.

It indicates that there is no contact to the TCP port used for file transfer over HTTP.This port is set in the uservariable http_port and has default value 80.

Possible causes:

1) Wrong settings in moshell Is the node accessed through RSG with port forwarding? In this case the uservariables http_port must be set accordingly.

2) HTTP server LM is hangingTry to restart the http server program with the progki l l command. This program is running in the O&M MP.

RNC11> lh ommp proglist

1 run CXC1320787_R51SZ01 (SystemManage) 2 run CXC1322506_R51SZ01 (iputil)


3 run CXC1323464_R51SZ01 (objectsuppor) 4 run CXC1322705_R51SZ01 (xpm) 5 run CXC1321314_R51SZ01 (sock) 6 run CXC1321316_R51SZ01 (ethernet) 7 run CXC1327705_R51SZ01 (dbagent) 8 run CXC1320742_R51SZ01 (spas_connect) 9 run CXC1320783_R51SZ01 (http_server) 10 run CXC1320784_R51SZ01 (jvm) 11 run CXC1321121_R51GD01 (nsssyci_mpbp) 12 run CXC1321344_R51EL02 (pms) 13 run CXC1329860_R10CD01 (RncLmFro) 14 run CXC1329861_R10CC01 (RncLmCenOm)

RNC11> lhsh 001200 progkill http

$ echo Killing program CXC1320783_R51SZ01Killing program CXC1320783_R51SZ01$ lhsh 001400 pgkill 15$

12.2.8 Case 7: File not found on HTTP server


Documents

Moshell Manual - BSS MANUAL - Usage Ericsson