Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
1094
1500
500
- I
nsi
de:
nLo
ngr
ine
(987
7-G
B) -
01
-20
09
- C
opy
righ
t: G
. Def
aix,
Cal
der
ys, L
afar
ge, G
F A
uto
mo
tive
, lon
grin
e in
GF,
XX
- 3
D-s
chem
a: L
ongr
ine
Cal
der
ys R
CS:
Epe
rnay
70
2 0
31
03
0 -
NA
F 2
62
L -
Cov
er:
Monolithic Concept Solutions
ferrous foundry
FOUNDRYINDUSTRY
�Monolithic concept solutions for Ferrous Foundry
Innovative Refractory Solutions and Concepts for the Ferrous Foundry Industry
Calderys has been well established in
the global foundry market for more
than half a century. By combining
all our products, knowledge and
experiences, we are able to offer
a comprehensive set of refractory
solutions and concepts for ALL
segments of the Ferrous Foundry
Industry, from the initial design to
thermal calculations, lining profiles and
ultimate installation services.
We have a comprehensive monolithic
product portfolio that has been
specifically designed for the Ferrous
Foundry market. In addition, we supply
a wide range of pre-cast shapes,
including cupola slag/drain/tap tubes,
channel spout blocks, ladles, convertor
plates, CIF push plugs/ring blocks as
well as purging plugs, nozzles, lances
and burner blocks.
Furthermore, our dedicated Research
and Development team has a
program that ensures the continual
improvements in the performance of
our products and in the way that they
can be installed and sintered/dried.
Our worldwide presence and local
experience allows us to propose the
most suitable cost effective and
technical solutions that will contribute
to our customer’s productivity and
efficiency.
� Monolithic concept solutions for Ferrous Foundry
Hearth
CASTABLe
CALDE™ CAST G 7 P
CALDE™ CAST G UC 52S40
CALDE™ CAST G UC 60S30
CALDE™ CAST G UC 65S25
CALDE™ CAST G UC 70S20 ED
CALDE™ CAST G UC 75S15
CALDE™ CAST G UT 62S30
RAMMeD LINING
CALDE™ RAM G B 55S20
CALDE™ RAM G B 64S10
CALDE™ RAM G B 68S15
CALDE™ RAM G C 65S20
Manhole / Tuyere protection
RAMMeD LINING
CALDE™ PLAST G C 65S20
CALDE™ RAM G B 55S20
CALDE™ RAM G B 64S10
CALDE™ RAM G B 68S15
CALDE™ RAM G C 65S20
Syphon Box
CASTABLe
CALDE™ CAST G 7 P
CALDE™ CAST G UC 52S40
CALDE™ CAST G UC 60S30
CALDE™ CAST G UC 65S25
RAMMeD LINING
CALDE™ RAM G B 68S15
CALDE™ RAM G C 65S20
Runner
CASTABLe
CALDE™ CAST G 7 P
CALDE™ CAST G UB 68S18
CALDE™ CAST G UC 52S40
RAMMeD LINING
CALDE™ RAM G B 55S20
CALDE™ RAM G B 68S15
Liningless Long Campaign Cupolas
�Monolithic concept solutions for Ferrous Foundry
Lined Long Campaign Cupolas
Melting Zone
CASTABLe
CALDE™ CAST 40 TR
CALDE™ CAST G 7 P
CALDE™ CAST G UC 65S25
GUNNING MATeRIAL
CALDE™ GUN G C 75S10
CALDE™ GUN G M 33 GSP
Charging Zone
GUNNING MATeRIAL
CALDE™ GUN F 55 CO
CALDE™ GUN F 56 CO
Stack
CASTABLe
CALDE™ CAST LA 60 Z
CALDE™ CAST LZ 106
GUNNING MATeRIAL
CALDE™ GUN M 32
� Monolithic concept solutions for Ferrous Foundry
Spout
CASTABLe
CALDE™ CAST 1560
CALDE™ CAST MB 80
CALDE™ FLOW AZ
RAMMING
CALDE™ PLAST 85 S
PReFAB.
Alternatively: prefabricated shape
Coil grout
GROUTING
CALDE™ PATCH C 90
CALDE™ STIX T 90 G1
Coreless Induction Furnaces
have been a major primary melting unit
in the ferrous foundry industry for
many years.
The demands placed on the refractory
lining are varied and sometimes very
complex, bringing very different sets
of circumstances that can affect the
performance of the refractory lining,
including:
• Thermal Shock
• Lining Wear
• Gas Penetration
• Slag Build up.
Thermal Shock
• The constant thermal cycling
of the refractory lining.
Lining Wear
• Erosion due to the physical
movement of the liquid metal.
• Corrosion due to the aggressive
chemistry of the metal and /or slag.
Gas Penetration
• The unwanted movement of gasses
through the refractory lining such as
carbon monoxide, zinc vapour and
steam
Slag Build up
• The deposition of oxides on the
refractory lining.
You will find in the following pages of
this brochure the products that can be
considered for each area of a Coreless
Induction Furnace depending on the
operational conditions.
Coreless Induction Furnaces
�Monolithic concept solutions for Ferrous Foundry
Upper & lower support rings
CASTABLe
CALDE™ CAST 1560
CALDE™ CAST UB
Top cap
CASTABLe
CALDE™ CAST LZ 106
PATCHING MATeRIAL
CALDE™ PATCH PB 82 U
Hot face lining
IRON - DVM
SILICA MIX
SILICA MIX 4
SILICA MIX 5
SILICA MIX 7
SILICA MIX Q
SILICA MIX QVF
SILICA MIX Z
STeeL - DVM
CALDE™ MIX SC 76 M12
CALDE™ MIX SC 84 M16
CALDE™ MIX SC 85 M17
Pusher block
CASTABLe
CALDE™ CAST 1560
CALDE™ CAST UB
Hot face repair
IRON
CALDE™ PATCH HQ 22 U
CALDE™ PATCH HQ 30 U
CALDE™ PATCH HQ 34 U
CALDE™ PATCH PB 82 U
CALDE™ STIX 151
STeeL
CALDE™ PATCH HC 80 M
CALDE™ PATCH PB 82 U
CALDE™ PATCH PT 88 R
Safety lining
INSULATION
Ceramic fibre board /Combifoil
Coreless Induction Furnaces Iron-Steel
Cover
CALDE™ CAST F 60 G10
CALDE™ CAST F 65
Safety lining
CASTABLe
CALDE™ FLOW LA 58 Z
� Monolithic concept solutions for Ferrous Foundry
Channel Holding Furnaces
The need for higher productivity and lower
costs has placed increasing demands on the
refractory lining. Due to various stresses
placed on the refractory lining, new materials
and designs had to be developed to offer the
best lining solutions to our customers.
Main stresses in a holding furnaces are the
following:
erosion mainly in the inlet spout where the
iron flows with a very high speed especially
if the melt is fed into the furnace by using
big transfer ladles.
Design solutions and very abrasion resistant
refractories are needed.
Corrosion occures in the slag line of the
vessel and in the lower part of the inlet
spout if aggressive slag is transferred into
the channel holder or if too much oxygen is
entering the furnace.
An aggressive slag can be formed by certain
desulphurisation methods or by galvanised
steel scrap used in the primary melting unit.
Highly corrosion resistant refractories have to
be selected together with intelligent design
solutions for the inlet spout area.
Overheating of the inductor throat lining is
the result of slag build up in the upper part
of the inductor throught. The heat exchange
between the inductor and the upper vessel
can be significantly reduced.
Refractories with a high slag sticking
resistance are needed.
You will find in the following pages of
this brochure the products that can be
considered for each area of a channel holding
or pouring furnace.
The best refractory solution for your
application has to be discussed with our
technical sales team.
�Monolithic concept solutions for Ferrous Foundry
Insulating lining
Ceramic fiber board
Safety lining
GUNNING
CALDE™ GUN M 32
BRICK
Super duty fire bricks
Wall & bottom insulating lining
GUNNING
CALDE™ CAST MW 140 C/G
BRICK
Light fire bricks
Spout & upper door
CASTABLe
CALDE™ CAST G LC 80S5
CALDE™ CAST LT 94 SP
CALDE™ CAST T 96
CALDE™ CAST UB
CALDE™ CAST UT 86 S
CALDE™ CAST UT 94
Hot face lining
CASTABLe
CALDE™ CAST LT 94 SP
CALDE™ CAST LT 98 L
CALDE™ CAST T 96
CALDE™ CAST UB
CALDE™ CAST UT 94
Channel Holding Furnaces Lining with Castable
10 Monolithic concept solutions for Ferrous Foundry
Hot face lining
DVM
CALDE™ MIX BC 90 Z R
CALDE™ MIX BT 98
CALDE™ MIX SA 68 S
CALDE™ MIX SC 88 S R
Spout & upper door
CASTABLe
CALDE™ CAST G LC 80S5
CALDE™ CAST LT 94 SP
CALDE™ CAST T 96
CALDE™ CAST UB
CALDE™ CAST UT 86 S
CALDE™ CAST UT 94
Wall & bottom insulating lining
BRICK
Light fire bricks
Channel Holding Furnaces Lining with DVm
Insulating lining
Ceramic fiber board
Safety lining
BRICK
Super duty fire bricks
11Monolithic concept solutions for Ferrous Foundry
Channel Holding Furnaces Covers
Hot face lining
CASTABLe
CALDE™ CAST F 65
CALDE™ CAST T 94
Topping
1 LAYeR
CALDE™ MAG COAT G 93
2 LAYeR
CALDE™ PATCH SC 88
CALDE™ PATCH SC 90
� LAYeR
CALDE™ PATCH OZ 96
Lining
DVM
CALDE™ MIX M S 86 BTI
CALDE™ MIX SC 86 NTI
Insulation layer
Ceramic fibre board
Insulation
CALDE™ CAST LW 134 CO C/G
CALDE™ GUN MW 130
Anchors
Ceramic Hanger bricks
Steel anchors
Insulation layer
Ceramic fibre paper
Channel Holding Furnaces Inductors
12 Monolithic concept solutions for Ferrous Foundry
Vessel hot face lining
CASTABLe
CALDE™ CAST LT 94 SP
CALDE™ CAST LT 98 L
CALDE™ CAST T 96
CALDE™ CAST UB
DVM (not for inlet and outlet)
CALDE™ MIX BB 84
CALDE™ MIX BC 90 Z R
CALDE™ MIX BT 98
CALDE™ MIX SA 88 S R
CALDE™ MIX SC 68 S
Solutions for channel holding/pouring furnace repair
VeSSeL COLD RePAIR
CALDE™ CAST AF 470
CALDE™ FLOW LB 85
CALDE™ FLOW MA 92
INDUCTOR FLANGe RePAIR
CALDE™ TROWEL HC 90 U
Vessel safety lining
GUNNING
CALDE™ GUN M 32
Brick
Super duty fire bricks
Insulation plate
Ceramic fibre board
Channel Pouring Furnaces
Vessel insulating lining
GUNNING
CALDE™ CAST MW 140 C/G
Brick
Light fire bricks
Cover insulating lining
GUNNING
CALDE™ CAST LW 134 CO C/G
Cover hot face lining
CASTABLe
CALDE™ CAST F 65
CALDE™ CAST T 94
1�Monolithic concept solutions for Ferrous Foundry
Receivers
Vessel hot face lining
RAMMING
CALDE™ RAM G B 68S15
CASTABLe
CALDE™ CAST G UC 60S30
CALDE™ CAST LX 58
CALDE™ CAST UB
CALDE™ CAST UT 86 S
Cover hot face
CASTABLe
CALDE™ CAST LM 70
CALDE™ CAST LX 50
CALDE™ CAST UB
Vessel / cover insulating lining
GUNNING
CALDE™ CAST MW 140 C/G
Insulation
Insulation plate
1� Monolithic concept solutions for Ferrous Foundry
Hot face lining
CASTABLe
CALDE™ CAST LX 58
RAMMING
CALDE™ RAM PF 55
Hot face lining - Iron
CASTABLe
CALDE™ CAST LB 84 G10
CALDE™ CAST LX 58
CALDE™ CAST LZ 106
CALDE™ CAST UB
CALDE™ FLOW AZ
CALDE™ FLOW LA 52 Z
CALDE™ FLOW LM 80
ramming
CALDE™ RAM PF 55
Repair/maintenance
PATCHING/COATING
CALDE™ GUN B 55 M
CALDE™ PATCH PB 82 U
CALDE™ STIX F 55 G3
CALDE™ STIX M 65 G3
Segment
Prefabricated shape
Treatment Vessels (GF Converter)
Vessel insulating lining
Prefabricated shape
Hot face lining - Steel
CASTABLe
CALDE™ CAST T 94
CALDE™ FLOW MA 92
Insulation
Insulation plate
Iron & Steel Transport, Pouring & Treatment Ladles
D1
D2
H
1�Monolithic concept solutions for Ferrous Foundry
Gas Purging Plugs
Type* D1 (mm)
D2 (mm)
H (mm)
Vol. (dm3)
SP �000/1�0 72 128 130 1.05
SP �000 59 128 165 1.18
SP �000 59 182 278 3.45
SP ��00 100 182 270 4.33
SP ��00/1�0 135 182 160 3.28
*Further types on request
All plugs are available with: a) direct porosity with slots or with ring channelb) non-direct porosity in quality “CALDe™ RAM LT ��“
Product name main component
Binding system
max. grain size
Chemical analysis (wt %) material required
(t/m3)
Permanent linear change (%)
CCS (N/mm2)
Al2O
3SiO
2mgO
CALDE™ CAST 41 Tabular Alumina Hydraulic 6 96 0.1 2.82 -0.1
(1200°C)+0.2
(1600°C)60
(1200°C)65
(1600°C)
CALDE™ CAST LT 90 SP G8Tabular
Alumina/ Spinel
Hydraulic 8 92 0.1 5 3.2 +0.1 (1200°C)
-0.15 (1600°C)
140 (1200°C)
200 (1600°C)
CALDE™ CAST LT 96 SPTabular
Alumina/ Spinel
Hydraulic 6 96 0.1 2.2 3.25 0 (1200°C)
-0.25 (1600°C)
140 (1200°C)
200 (1600°C)
CALDE™ CAST TL 95 SPTabular
Alumina/ Spinel
Hydraulic 6 96 0.1 2.2 3.15 -0.1 (1200°C)
-0.1 (1600°C)
80 (1200°C)
160 (1600°C)
CALDE™ RAM LT 98 (porous) Tabular Alumina Hydraulic 1 97 0.2 2.65 +0.05
(1300°C)+0.1
(1600°C)40
(1300°C)75
(1600°C)
1�
Technical Data
Monolithic concept solutions for Ferrous Foundry
Product name Main component Max. recomm. temp. (°C)
Chemical analysis (wt %) Material required
(t/m3)Al2O
�SiO
2MgO SiC ZrO
2
CASTABLeS
CALDE™ CAST LW 134 CO C/G Chamotte/Perlite 1340 42 46 - - - 0,95 (cast)
CALDE™ CAST MW 140 C/G Insulating Chamotte 1400 42 43,6 - - - 1,3
CALDE™ CAST 1560 Andalusite 1650 59 36 - - - 2,5
CALDE™ CAST 40 TR Tabular Alumina 1820 95 0,1 - - - 2,67
CALDE™ CAST AF 470 Andalusite 1650 70 24 - - - 2,61
CALDE™ CAST F 60 G10 High Alumina 1500 62 30 - - - 2,25
CALDE™ CAST F 65 Chamotte 1650 65 30 - - - 2,35
CALDE™ CAST G 7 P* Corundum 1650 72 2,5 - 19,5 - 3,1
CALDE™ CAST G LC 80S5* Corundum 1650 78 6,3 - 4,9 - 3
CALDE™ CAST G UB 68S18* Bauxite/ Corundum 1650 68 6,7 - 18,6 - 2,95
CALDE™ CAST G UC 52S40* Corundum 1650 52 3,4 - 39 - 3
CALDE™ CAST G UC 60S30* Corundum 1650 62 3 - 29 - 3,1
CALDE™ CAST G UC 65S25 Corundum 1650 66,5 - - 24,3 - 2,9
CALDE™ CAST G UC 70S20 ED Corundum 1650 72 2,5 - 19,5 - 3,1
CALDE™ CAST G UC 75S15 Corundum 1650 75 3 - 14,5 - 3,1
CALDE™ CAST G UT 62S30* Tabular Alumina 1650 63 1,5 - 32 - 2,95
CALDE™ CAST LA 60 Z Andalusite 1650 57,5 29,7 - - 9,6 2,8
CALDE™ CAST LB 65 Bauxite 1600 67 28 - - - 2,5
CALDE™ CAST LM 70 High Alumina 1650 70 26 - - - 2,51
CALDE™ CAST LT 94 SP Tabular Alumina/ Spinel 1850 92,5 - 5,3 - - 3,15
CALDE™ CAST LT 98 L Tabular Alumina 1850 98 0,2 - - - 3,2
CALDE™ CAST LX 50 Chamotte 1520 52 43 - - - 2,42
CALDE™ CAST LX 58 Andalusite 1650 57 38 - - - 2,53
CALDE™ CAST LZ 106 Zircon 1600 29 24 - - 43 3,25
CALDE™ CAST MB 80 Bauxite/ Corundum 1600 83 11 - - - 2,69
CALDE™ CAST T 94 Tabular Alumina 1800 94 0,2 - - - 2,75
CALDE™ CAST T 96 Tabular Alumina 1750 96 0,1 - - - 2,85
CALDE™ CAST UB Bauxite 1680 84,3 11,5 - - - 3
CALDE™ CAST UT 86 S Tabular Alumina 1800 86,1 6 - - - 3,15
CALDE™ CAST UT 94 Tabular Alumina 1800 93 6 - - - 3,15
* Hydrogen release product
1�
Technical Data
Monolithic concept solutions for Ferrous Foundry
Product name Main component Max. recomm. temp. (°C)
Chemical analysis (wt %) Material required
(t/m3)Al2O
�SiO
2MgO SiC ZrO
2
SeLF FLOW CASTABLeS
CALDE™ FLOW AZ Andalusite 1650 59 28,4 - - 9,6 2,8
CALDE™ FLOW LA 52 Z Andalusite 1700 52 28 - - 17 2,85
CALDE™ FLOW LA 58 Z* Andalusite 1650 59 - - - 9,6 2,7
CALDE™ FLOW LB 85 Bauxite 1600 84,5 9,5 - - - 2,8
CALDE™ FLOW LM 80 Tabular Alumina 1750 76 20 - - - 2,7
CALDE™ FLOW MA 92 Tabular Alumina/ Spinel 1850 92 0,6 5,4 - - 2,9
CALDE™ FLOW UT 80 SZ* Tabular Alumina 1700 80 7 - 9,3 - 2,85
GUNNING PRODUCTS
CALDE™ GUN B 55 M Bauxite/Magnesia 1500 52 18 24 - - 2,5
CALDE™ GUN F 55 CO Chamotte 1500 55 35 - - - 2,3
CALDE™ GUN F 56 CO High Alumina 1450 56,5 33,5 - - - 2,4
CALDE™ GUN G B 70S10 Bauxite 1650 69,5 - - 9,6 - 2,3
CALDE™ GUN G C 75S10 Corundum 1750 76 4,9 - 9,6 - 2,5
CALDE™ GUN G LC 70S20 Corundum 1650 68,5 - - 19,1 - 2,7
CALDE™ GUN G M 33 GSP Bauxite 1650 62,5 7,8 - 19,2 - 2,3
CALDE™ GUN M 32 Bauxite 1650 79,5 13,4 - - - 2,75
CALDE™ GUN MW 130 Insulating Chamotte 1300 36,5 44 - - - 1,3
COATING PRODUCTS
CALDE™ MAG COAT G 93 Magnesia 1600 0,8 4,7 92,5 - - 2,42
DVM’s
CALDE™ MIX BB 84 Bauxite 1750 84 11 - - - 2,8
CALDE™ MIX BC 88 S Corundum 1670 87,5 4,6 - 5 - 3,05
CALDE™ MIX BC 90 Z R Corundum 1650 89,5 2,5 - - 3 3
CALDE™ MIX BT 98 Tabular Alumina 1700 98 0,2 - - - 3
CALDE™ MIX M S 86 BTI Magnesia 1700 12 1,5 84 - - 2,8
CALDE™ MIX SA 68 S Andalusite 1670 67 29 - 2 - 2,6
CALDE™ MIX SC 76 M12 Corundum/ Magnesia 1750 76 - 22 - - 2,85
CALDE™ MIX SC 84 M16 Corundum/ Magnesia 1750 84 - 14 - - 2,85
CALDE™ MIX SC 85 M17 Alumina/ Magnesia 1750 84 0,3 14 - - 2,8
CALDE™ MIX SC 86 NTI Alumina/ Magnesia 1700 86 0,6 10 - - 3
CALDE™ MIX SC 88 S R Corundum 1700 89 9 - - - 3
* Hydrogen release product
1�
Technical Data
Monolithic concept solutions for Ferrous Foundry
Product name Main component Max. recomm. temp. (°C)
Chemical analysis (wt %) Material required
(t/m3)Al2O
�SiO
2MgO SiC ZrO
2
PATCHING PRODUCTS
CALDE™ PATCH C 90 Corundum 1500 87 2,5 - - - 2,3
CALDE™ PATCH F 40 Chamotte 1400 38 45,5 - - - 2,2
CALDE™ PATCH HC 80 M Alumina/Magnesia 1600 82 2,3 14 - - 2,65
CALDE™ PATCH HQ 22 U Quartzite 1700 4 93 - - - 2
CALDE™ PATCH HQ 30 U Quartzite 1700 4 93 - - - 2
CALDE™ PATCH HQ 34 U Quartzite 1700 4 93 - - - 2
CALDE™ PATCH OZ 96 Zirconia Oxide 1700 - - - - 96
CALDE™ PATCH PB 82 U Bauxite 1600 82 9 - - - 2,9
CALDE™ PATCH SC 88 Corundum 1600 88 10 - - -
CALDE™ PATCH SC 90 Corundum 1700 89 8,5 - - -
PLASTIC PRODUCTS
CALDE™ PLAST 85 S Bauxite 1700 85 7,4 - - - 2,95
CALDE™ PLAST G C 65S20 Corundum 1650 65 6,5 - 20 - 2,8
RAMMING PRODUCTS
CALDE™ RAM G B 55S20 Bauxite/Silicon Carbide 1600 55 11 - 22 - 2,6
CALDE™ RAM G B 64S10 Bauxite 1700 64,5 8,8 - 9,7 - 2,8
CALDE™ RAM G B 68S15 Bauxite/Corundum 1650 67 7 - 15 - 2,94
CALDE™ RAM G C 65S20 Corundum 1700 63 3,8 - 19,2 - 2,8
CALDE™ RAM LT 98 Tabular Alumina 1850 97 0,2 - - - 2,65
CALDE™ RAM PF 55 Chamotte 1620 60 35 - - - 2,6
STIX PRODUCTS
CALDE™ STIX 151 High Alumina 1550 55 32 - - 3 2,1(TR) 2,45(G)
CALDE™ STIX F 55 G3 Chamotte 1450 54 37 - - - 1,85 (TR)
CALDE™ STIX M 65 G3 High Alumina 1600 67 25 - - - 2,2 (TR) 2,6(G)
CALDE™ STIX T 90 G1 Tabular Alumina 1750 91 3 - - - 2,85 (TR)
TROWeL PRODUCTS
CALDE™ TROWEL G SM 40 Kyanite 1600 41,6 41,6 - - - 2,35
CALDE™ TROWEL HC 90 U Corundum 1600 89 9 - - -
1�
Technical Data
Monolithic concept solutions for Ferrous Foundry
NOTES: CALDERYS does not warrant the accuracy, fitness for purpose or update of any information disclosed herein. The recipient shall refer to instructions and advice provided under any technical documentation. This document and the information contained herein are the exclusive property of CALDERYS. Reproduction, alteration, copy, release, publication or distribution, in whole or in part, is not allowed.References, trademarks and specifications of the products may change according to the geographical area to be supplied. Please check the availability of the products with the sales area manager.
Product name Main component Max. recomm. temp. (°C)
Chemical analysis (wt %) Material required
(t/m3)Al2O
�SiO
2MgO SiC ZrO
2
DRY SILICA DVM’s
SILICA MIX (for example A 0.8) Quartzite 1580 - 98 - - - 2,1
SILICA MIX 4 (for example A 0.8) Quartzite 1580 - 98 - - - 2,1
SILICA MIX 5 (for example A 0.8) Quartzite 1580 - 98 - - - 2,2
SILICA MIX 7 (for example A 0.8) Quartzite 1580 - 98 - - - 2,2
SILICA MIX CAP Quartzite 1600 - 96,2 - - - 2,2
SILICA MIX ITP Quartzite 1700 - 96,3 - - - 2,2
SILICA MIX Q 14 Quartzite 1450 - 98 - - - 2
SILICA MIX Q 15 Quartzite 1550 - 98,2 - - - 2
SILICA MIX Q 16 Quartzite 1650 - 98,4 - - - 2
SILICA MIX Q 17 Quartzite 1700 - 98,6 - - - 2
SILICA MIX QVF 14 Quartzite 1450 - 98 - - - 2
SILICA MIX QVF 15 Quartzite 1550 - 98,2 - - - 2
SILICA MIX QVF 16 Quartzite 1650 - 98,4 - - - 2
SILICA MIX QVF 17 Quartzite 1700 - 98,6 - - - 2
SILICA MIX Z 14 Quartzite 1450 0,6 91,8 - - 6 2,25
SILICA MIX Z 15 Quartzite 1550 0,6 92 - - 6 2,25
SILICA MIX Z 16 Quartzite 1650 0,6 92,2 - - 6 2,25
SILICA MIX Z 17 Quartzite 1700 0,6 92,4 - - 6 2,25
1094
1500
500
www.calderys.com
Performance you can trust
- I
nsi
de:
nLo
ngr
ine
(987
7-G
B) -
01
-20
09
- C
opy
righ
t: G
. Def
aix,
Cal
der
ys, L
afar
ge, G
F A
uto
mo
tive
, lon
grin
e in
GF,
XX
- 3
D-s
chem
a: L
ongr
ine
Cal
der
ys R
CS:
Epe
rnay
70
2 0
31
03
0 -
NA
F 2
62
L -
Cov
er:
AustrAliA Calderys Australia Pty LtdPh.: +61 (0)2 4272 28 [email protected]
AustriACalderys Austria GmbHPh.: +43 (0)2236 677 090 [email protected]
BelgiumCalderys Belgium S.A. Ph.: +32 (0)10 45 44 24 [email protected]
BulgAriACalderys Austria GmbHPh.: +359 (0)2 856 [email protected]
ChinACalderys China Co. LtdPh.: +86 (0)21 6137 8288 [email protected]
CzeCh repuBliCCalderys Czech s.r.o Ph.: +420 596 620 544 [email protected]
DenmArkCalderys Danmark A/SPh.: +45 (0)36 77 28 11 [email protected]
FinlAnDCalderys Finland OYPh.: +358 (0)9 854 5060 [email protected]
FrAnCeCalderys France Ph.: +33 (0)3 26 80 54 44 [email protected] Dept.Ph.: +33 (0)1 41 08 11 00
germAnyCalderys Deutschland GmbH & Co. OHGPh.: +49 (0)2631 8604 0 [email protected]
hungAryCalderys Magyarország KftPh.: +36 (0)1 268 [email protected]
inDiAAce Calderys Ph.: +91 (0)71 2252 [email protected]@calderys.com
itAlyCalderys Italia SrlPh.: +39 053 691 29 [email protected] Sales Ph.: +39 010 645 07 06
JApAnCalderys Japan Co Ltd.Ph.: +81 (0)7-8272 [email protected]
koreACalderys Korea Co LtdPh.: +82 (0)2 420 5142 ~ [email protected]
mexiCoCalderys de Mexico SA de CVPh.: +52 81 15 94 30 [email protected]
netherlAnDsCalderys The Netherlands BVPh.: +31 (0)162 468 [email protected]
polAnDCalderys Austria GmbH Ph.: +48 (0)32 330 34 [email protected]
russiACalderys Russia oooPh.: +7 (0)812 318 31 19,[email protected]
south AFriCACalderys South Africa Pty Ltd Ph.: +27 (0)16 440 64 00 [email protected]
spAinCalderys Iberica Refractarios S.A.Ph.: +34 (0)985 32 43 58 [email protected]
sweDenCalderys Nordic AB Ph.: +46 (0)31 54 09 00 [email protected]
tAïwAnCalderys Taïwan Co. LtdPh.: +886 (0)8 796 55 [email protected]
turkeyCalderys Refrakter San. ve Tic. A.SPh.: +90 (0)312 438 88 45 [email protected]
u.A.e.Calderys France Ph.: +971 4 8810 992 [email protected]
uk Calderys UK Ltd Ph.: +44 (0)113 26 36 268 [email protected]
ukrAineCalderys Ukraine LLCPh.: +38 (0)62 387 10 [email protected]
VenezuelACalderys Refractarios Venezolanos S.A.Ph.: +58 (0)286 994 [email protected]
VietnAmCalderys Taïwan Co. LtdPh.: +84 (0)4 6251 [email protected]