1A - OPTIMISATION

Using Optimisation in the Design of the RWUAS Air VehicleStructureINVITED PRESENTER: Gordon Mackenzie, Leonardo Helicopters

Rapid Stochastic Broadband Acoustics on GPUsMark Allan, Zenotech Ltd

Automated Shape Optimization Technology Coupled withUpfront CFDSean Horgan, 80/20 Engineering Ltd

LUNCH BREAK & VENDOR PRESENTATION

1B - ARTIFICIAL INTELLIGENCE & MACHINELEARNING 1

Torsional Stiffness Simulation of Metallic Disc MembraneCouplings Considering Pre-Stretch and Post-BucklingBehaviourMurat Islam, John Crane UK Ltd.

The Development of Machine Learning Tools to Automateand Improve on the Identification of Invasive Non-nativeSpecies and Help Keep Boots off BallastSam Ahdab, Mott MacDonald

A New Method for Fast Finite Element Explicit CrashSimulationsJing Bi, Dassault Systèmes SIMULIA

1C - COMPUTATIONAL TRIBOLOGY

Recent Developments in ModellingTechniques to Study Surface Interactionsin TribologyINVITED PRESENTER: Daniele Dini, Imperial College London

Optimization of Piston-Cylinder LinerConjunction Micro-Geometry forEnhanced Tribo-Dynamic Performance Stephen Bewsher, AVL List GmbH

Tribodynamic Modelling of High-speedRolling Element Bearings UsingExperimentally Obtained BoundaryConditionsHarry Questa, Loughborough University

OPENING OF CONFERENCEPLENARY SESSION

The National Digital TwinKEYNOTE SPEAKER: Mark Enzer, Mott MacDonald

Introduction to NAFEMS MembershipPaul Steward, NAFEMS

REFRESHMENT BREAK & VENDOR PRESENTATION

MONDAY 9TH NOVEMBER 2020 | DAY 1 - MORNING SESSION09:35

09:40

10.25

10.40

10.55

11.20

11.45

12.10

2A - COMPOSITES

European Materials Modelling CouncilINVITED PRESENTER: Gerhard Goldbeck, Goldbeck Consulting

Supporting Innovative Composite TechnologiesAndrew Main, MSC software UK Ltd

Multiscale Modelling of Random and Hybrid DiscontinuousTow Based CompositesRizwan Choudhry, University of Derby

SHORT BREAK & VENDOR PRESENTATION

2B - ARTIFICIAL INTELLIGENCE & MACHINELEARNING 2

Increase CAE Productivity Levels Utilizing MachineLearningTom Rosenwinkel, Open IT

Artificially Intelligent Segmentation of a Shock AbsorberX-ray CT Scan and BeyondEmmanuela Baksiova, BETA CAE Systems UK Ltd

Development of a Real-time Engine TemperatureMonitoring System, Using AI Based on Accurate andValidated Thermal Simulation DataChristian Semler, MAYA HTT

2C - SHEET METAL FORMABILITY –MATERIAL PROPERTIES, FAILUREAND SIMULATION

This workshop is intended to assist allthose involved in the design of sheetmetal components to identify the keymaterial properties and potential failuremodes during manufacture. The sessionwill demonstrate how CAE methods canbe used to simulate the manufacturingmethod in order to identify any potentialproblems with the process and establish ifpart design changes are required.

WORKSHOP TOPICS – PART 1:

• Introduction to sheet metal formingprocesses

• Characterisation of sheet metalmaterial properties for use insimulation

• Definition of processfailureSimulations

2D - UNCERTAINTY QUANTIFICATION 1

Stochastic Topology Optimization ForRobust And Reusable DesignsJohannes Neumann, Rafinex SARL

Dealing with Uncertainty with Confidence Edoardo Patelli, University of Strathclyde

Model Reduction and UncertaintyQuantification for Weld Simulations onFerritic MaterialsJefri Draup, EDF Energy R&D

Uncertainty in Simulation and Test Jack Reijmers, Nevesbu

3A - ELECTROMAGNETICS

Motor Design Optimisation Including ElectromagneticPerformance and Mechanical StressTamara Monti, Dassault Systemes UK Ltd

3D Electromagnetic Eddy-Current Problems within theFinite Element Framework of Computing Platform FEniCSNunzio Palumbo, Rolls Royce plc

END OF DAY 1

3B - INFRASTRUCTURE 3C - SHEET METAL FORMABILITY –MATERIAL PROPERTIES, FAILUREAND SIMULATION

WORKSHOP TOPICS – PART 2:

• Discussion of the different materialsused in sheet metal forming

• Description of how materials aretested to establish the requiredmaterial parameters

• Application of simulation with anexample using the Forming Limit Test

3D - FROM GRAINS TO PROPERTIES

CALCULATING BULK SCALE BEHAVIOURFROM MICROSTRUCTURES

Computational Structural MechanicsWorking Group

Modern engineering uses material designto obtain advantageous properties forchallenging applications. This materialdesign is underpinned by advancedsimulation methods that use knowledgeof the microstructure of the materials topredict the bulk-scale material response.This session will focus on one suchtechnique, crystal plasticity finite elementanalysis, and will serve as an introductionto what it does and how it can be used.

3E - UNCERTAINTY QUANTIFICATION 2

Effective Quadratures: EmpoweringEngineers with Open SourceComputational MethodologiesPranay Seshadri, The Alan Turing Institute

Supporting the Design of CompositeComponents using Multi-physicsSimulationsOlivia Stodieck, Daptablade Ltd.

DAY 1 - AFTERNOON SESSIONPLENARY SESSION

Saving the Russian Mir Space Station : The Role of Computerised SimulationKEYNOTE PRESENTER: Michael Foale CBE, British-American Astrophysicist & Former NASA Astronaut

MONDAY 9TH NOVEMBER 2020 | DAY 1 - AFTERNOON SESSION

12.35

14:00

14.25

14.50

15.15

15.40

15.55

16:20

Innovative Techniques for Bridge AssessmentRicardo Teixeira , Mott MacDonald

4A - ADDITIVE MANUFACTURING

Rapid 3D Inspection of AM Components Using CT: FromDefect Detection to Thermal Performance SimulationCelia Butler, Synopsys

Structural Simulation of Components with Defects - AWorkflow from Computed Tomography to Finite ElementSimulationBeate Lauterbach, Volume Graphics GmbH

REFRESHMENT BREAK & VENDOR PRESENTATION

4B - CFD 1

High-Fidelity CFD the Automotive and Motorsport SectorsIn The CloudINVITED PRESENTER: Neil Ashton, Amazon Web Services

Novel Multi-billion Degrees-of-freedom FEA Models forRapid Simulation of the Multi-Physics Behaviour of aComplete Aero EngineNeeraj Cherukunnath, Rolls Royce Plc

5A - MANUFACTURING PROCESS

Finite Element Simulation of the Braiding ProcessMelodie Cueto Carrion, National Composites Centre

Understanding the Manufacturing Cost Drivers ofTolerancesAmanda Bligh, aPriori Technologies

Understanding Powder Behaviour in an AdditiveManufacturing Process by Using DEMMarina Sousani, DEM Solutions Ltd

Manufacturing Process Chain Model in CompositesManufacturingMelodie Cueto Carrion, National Composites Centre

LUNCH BREAK & VENDOR PRESENTATION

5B - CFD 2

Using Fluid Dynamics for Simulating Exterior BallisticsPhenomenaVéronique de Briey, Royal Military Academy

Employing Advanced CFD to Predict Oil Distribution,Churning Losses and Gearbox CoolingDavid Percival, EnginSoft UK Limited

Numerical and Experimental Evaluation of Tile StovesMode of OperationFlorian Schüssler, ACAM Engineering GmbH

Increasing Product Reliability with Reduced Order ModelsJohn Parry, Mentor, A Siemens Business

DAY 2 - MORNING SESSIONPLENARY SESSION

Climate Change – How Can Climate Models Help us to Respond?KEYNOTE SPEAKER: Vicky Pope, University College London

Innovation through Engineering Simulation - A Rolls-Royce PerspectiveINVITED PRESENTER: Akin Keskin, Rolls Royce

SHORT BREAK & VENDOR PRESENTATION

TUESDAY 10TH NOVEMBER 2020 | DAY 2 - MORNING SESSION

09.00

09.45

10.20

10.35

11.00

11.25

11:40

12.05

12.30

12.55

13.20

6A - INNOVATIVE APPLICATIONS

Rule-based Automatic Mesh Sizing for FEA and CFDHenry Bucklow, ITI

E-Motor Development At Porsche: Using An Optimization-Driven Multi-Physics Design ProcessSimon Guicheteau, Altair Engineering Ltd.

The Story Behind Building the World's Fastest FullyElectric Aircraft Sabrina Hafid, ANSYS UK Ltd

REFRESHMENT BREAK & VENDOR PRESENTATION

6B - CFD 3

Windtech Technology - Measuring Cold Exposure viaConjugate Heat TransferHassan Khawaja, UiT The Arktic University of Norway

Evaluation of Volume Cavity Replacement Technique onIndustrial High-Fidelity CFD ModelsMahmoud Aboukhedr, BETA CAE Systems UK Ltd.

Design and Optimization of Cooling System Component forEnhanced AirflowRachana Rao Mallyala, Dassault Systemes UK Ltd

Process Optimisation in Robotic Arc Welding byComputational Fluid Dynamics MethodsAlessio Basso, TWI Ltd

6C - SIMULATION GOVERNANCE

A value-focussed approach to thedeployment of Simulation DataManagement in AerospaceMark Norris, The SDMConsultancy

How to succeed at SPDMMark Norris, The SDMConsultancy

7A - DIGITAL TWINS

Digital Twin : Myth or Reality?INVITED PRESENTER: Prashant Khapane, Jaguar Land Rover

Digital Twins in the Nuclear Industry: Implementation andKey LessonsKonstantin Vikhorev, Virtual Engineering Centre

Hardware and Software System for Managing the LifeCycle of Gas TurbinesDanil Pimanov, Satratek

END OF DAY 2

7B - CFD 4

A Reduced Order Modelling for Flight MechanicsSimulation of a Tilt Wing EVTOL Concept Hovering in aCross-Wind ConditionIndi Tristanto, Rolls-Royce

A Conceptual Study of an Externally Cooled, High VoltageUnderground Cable CrossingStephen King, Dassault Systemes UK Ltd

7C - INNOVATIVE APPLICATIONS

VMAP Enabling InterprobabiltyIntegrated CAE Simlution WorkflowsGino Duffett, NAFEMS

Parallel Engineering Codes:Performance Optimisation with POPMethodologyFouzhan Hosseini, The NumericalAlgorithms Group Ltd (NAG)

TUESDAY 10TH NOVEMBER 2020DAY 2 - AFTERNOON SESSION | DAY 2 - AFTERNOON SESSION

14:20

14.45

15.10

15.35

16.00

16.15

16.40

17.05