Upload
dangquynh
View
217
Download
1
Embed Size (px)
Citation preview
www.jurchen-technology.com
Jurchen Technology GmbH Steigweg 24
97318 Kitzingen
All data may subject to alterations and errors. 2015_0408_EN
The newFirst Solar® FS4 clipis ready for shipment!
Our MK-A HR design results from a close longterm collaboration with distinguished European project installers both for ground-mounts as well as roof-systems. The MK-A 70 HR module clip fits seamlessly to the photovoltaic mounting structure of Jurchen Technology and other commercially available standard solutions. This advanced system design ensures a secure hold of the PV module.
The superior concept of the MK-A 70 HR design brings benefit starting with installation: The laminates can be installed safely due to the ex-tended lower special developed rubber lip (see image „1“). The central connection point (customised for different screws) and the protection bar below (see image „2“) help avoid too high torques during installation. PV system performance is supported by shade-free screw connection.
During he last years the Jurchen Technology MK-A 70 module clip has been installed many million times in photovoltaic arrays throughout Europe. The well-thought-out and patended concept has proven ist strength.
For optimal installation: fast, reliable, secure
Proven millionfold – In operation worldwide under extreme conditions
1
2
1
2
The extended lower special developed EPDM rubber lip guarantees an easy and secure installation.
Practical protection bar to avoid extreme torsional moments..
Key data■ Patented design with an EPDM rubber for a secure
hold of the solar modules
■ Resource conservative and compact design
■ Practical end stop to prevent module damages
■ Highest quality for competitive pricing
■ Optional anti-theft system
■ Certified by First Solar®
Module clip MK-A HR Typ FS4
www.jurchen-technology.com
Bestellhotline: (09369) 98229 - 660
Jurchen Technology GmbH Steigweg 24
97318 Kitzingen
All data may subject to alterations and errors. 2015_0408_EN
TEILELISTEBESCHREIBUNGANZAHLOBJEKT
Modulklemme Profil11EPDM-Gummi22
1A4
Modulklammer MKA 70-9
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name27.10.2010 Karsten Vogt
Allgemein-toleranz DIN ISO2768-m
Diese Zeichnung darf ohneGenehmigung weder vervielfältigt nochdritten Personen oderKonkurrenzfirmen zugänglich gemachtwerden
OberflächenDIN EN ISO1302
M1:1
M1:2
57
20
6,8
The new
First Solar® FS4 Clip
is ready for shipment!
Module clip MK-A HR MK-A HR 80-7Item number: 06006165
MK-A HR 80-9Item number: 06006192
Hole diameter Ø suitable for M6 M8
Available length of the module clip* 80 mm 80mm
Possible module types First Solar® module series FS2, FS3 and FS4 First Solar® module series FS2, FS3 and FS4
Utilizable for the following laminate thickness 6.8 mm (± 0.1 mm) 6.8 mm (± 0.1 mm)
Main casting material Aluminum, weatherproof Aluminum, weatherproof
Insert material EPDM, UV-resistant and weatherproofElectrical resistance > 1x1014 Ohm * cm
EPDM, UV-resistant and weatherproofElectrical resistance > 1x1014 Ohm * cm
Shore hardness 55 Shore A ± 5 in the mounting area 55 Shore A ± 5 in the mounting area
Minimum support area 60 mm 60 mm
Usable as an edge clip without additional compo-nents
Yes Yes
Optional anti-theft system Yes Yes
Customised lengths available subject to request Yes Yes
Technical data MK-A HR Typ FS4
Cross section with dimensions of aMK-A HR M module middle clip:
Installation of a MK-A HR:
The use as a edge clip is possible without additional components.
*Individual length possible accordingly.
Cross section with dimensions of aMK-A HR E module end clip:
18,5
37
6,8
6,8 18