MODEL NO.: N133I6 - L0A h É Õ Ó · Doc No.: 44082403 Issued Date: Jul. 10, 2008 Model No.: N133I6 - L0A Approval 1 / 30 The information described in this technical specification

Doc No.: 44082403 Issued Date: Jul. 10, 2008 Model No.: N133I6 - L0A

Approval

1 / 30 The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification. Version 2.0

TFT LCD Approval Specification

MODEL NO.: N133I6 - L0A

記錄工作審核角色投票

2008-07-16 10:03:38

PMMD III Director

annie_hsu(徐凡琇/56522 / 54873) Director Accept

Customer: Approved by:

Note:

www.yslcd.com.tw


Approval


- CONTENTS - REVISION HISTORY ------------------------------------------------------- 4 1. GENERAL DESCRIPTION ------------------------------------------------------- 5 1.1 OVERVIEW 1.2 FEATURES 1.3 APPLICATION 1.4 GENERAL SPECIFICATIONS 1.5 MECHANICAL SPECIFICATIONS 2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 6 2.1 ABSOLUTE RATINGS OF ENVIRONMENT 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE 2.2.2 BACKLIGHT UNIT 3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 8

3.1 TFT LCD MODULE 3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM ------------------------------------------------------- 11

4.1 TFT LCD MODULE 4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 12 5.1 TFT LCD MODULE 5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL 5.3 COLOR DATA INPUT ASSIGNMENT 5.4 EDID DATA STRUCTURE 6. CONVERTER SPECIFICATION ------------------------------------------------------- 19 6.1 INPUT CONNECTOR PIN ASSIGNMENT

6.2 INPUT ELECTRICAL CHARACTERISTICS OF CONVERTER 7. INTERFACE TIMING ------------------------------------------------------- 20 7.1 INPUT SIGNAL TIMING SPECIFICATIONS 7.2 POWER ON/OFF SEQUENCE 8. OPTICAL CHARACTERISTICS ------------------------------------------------------- 22 8.1 TEST CONDITIONS 8.2 OPTICAL SPECIFICATIONS 9. PRECAUTIONS ------------------------------------------------------- 25 9.1 HANDLING PRECAUTIONS 9.2 STORAGE PRECAUTIONS 9.3 OPERATION PRECAUTIONS 10. PACKING ------------------------------------------------------- 26 10.1 CARTON 10.2 PALLET

www.yslcd.com.tw


Approval


11. DEFINITION OF LABELS ------------------------------------------------------- 28 11.1 CMO MODULE LABEL 11.2 CMO CARTON LABE

www.yslcd.com.tw


Approval


REVISION HISTORY

Version Date Page(New) Section Description

0.0 1.0 2.0

Nov, 01,’07 May, 10,’08 Jul. 10.’08

All All All

All All All

Tentative specification was first issued. Preliminary specification was first issued. Approval specification was first issued

www.yslcd.com.tw


Approval


1. GENERAL DESCRIPTION 1.1 OVERVIEW

N133I6 - L0A is a 13.3” TFT Liquid Crystal Display module with LED Backlight unit and 40 pins LVDS

interface. This module supports 1280 x 800 WXGA mode and can display 262,144 colors. The optimum

viewing angle is at 6 o’clock direction. The converter module for Backlight is built in.

1.2 FEATURES - Thin and Light Weight

- WXGA (1280 x 800 pixels) resolution

- DE only mode

- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock

1.3 APPLICATION - TFT LCD Notebook

1.4 GENERAL SPECIFICATI0NS Item Specification Unit Note

Active Area 286.08 (H) x 178.8 (V) mm Top Polarizer Area 289.48 (H) x 182.2 (V) mm (1)

Driver Element a-si TFT active matrix - - Pixel Number 1280 x R.G.B. x 800 pixel - Pixel Pitch 0.2235 (H) x 0.2235 (V) mm - Pixel Arrangement RGB vertical stripe - - Display Colors 262,144 color - Transmissive Mode Normally white - - Surface Treatment Anti Glare - -

1.5 MECHANICAL SPECIFICATIONS Item Min. Typ. Max. Unit Note

Horizontal(H) -- 304.75 -- mm Vertical(V) -- 203.15 -- mm Module Size Depth(D) 3.55 3.7 3.85 mm

(1)

Weight --- -- 245 g - I/F connector mounting position The mounting inclination of the connector makes the screen

center within ±0.5mm as the horizontal. (2)

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Note (2) Connector mounting position

+/- 0.5mm

www.yslcd.com.tw


Approval


2. ABSOLUTE MAXIMUM RATINGS 2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Value Item Symbol Min. Max. Unit Note

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) SNOP - 200/2 G (3), (5) Vibration (Non-Operating) VNOP - 1.5 G (4), (5) Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta ≦ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel surface should be 0 ºC Min. and 50 ºC Max.

Note (3) 1 time for ± X, ± Y, ± Z. for Condition (200G / 2ms) is half Sine Wave,

Note (4) 10 ~ 500 Hz, 0.5 Hr / Cycle, 1 cycles for each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

so that the module would not be twisted or bent by the fixture.

The fixing condition is shown as below:

At Room Temperature

Side Mount Fixing Screw Side Mount Fixing Screw

Stage

Bracket

LCD Module

gap=2mm

Storage Range

Relative Humidity (%RH)

Operating Range

Temperature (ºC)

100

8060 -20 400 20-40

80

40

60

2010

90

www.yslcd.com.tw


Approval


2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE

Value Item Symbol Min. Max. Unit Note

Power Supply Voltage VCC -0.3 +4.0 V Logic Input Voltage VIN -0.3 VCC+0.3 V (1)

2.2.2 BACKLIGHT UNIT Value Item Min Typ. Max. Unit Note

LED Light Bar Input voltage 27.0 -- 30.6 VDC LED Light Bar Input Current -- (120) -- mADC (1), (2)

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

Note (2) Specified values are for LED (Refer to Section 3.2 for further information).

www.yslcd.com.tw


Approval


3. ELECTRICAL CHARACTERISTICS 3.1 TFT LCD MODULE

Value Parameter Symbol Min. Typ. Max. Unit Note

Power Supply Voltage Vcc 3.0 3.3 3.6 V - Permissive Ripple Voltage VRP - 50 - mV - Rush Current IRUSH - - 1.5 A (2) Initial Stage Current IIS - - 1.0 A (2)

White - 200 230 mA (3)a Power Supply Current Black Icc - 270 300 mA (3)b

LVDS Differential Input High Threshold VTH(LVDS) - - +100 mV (5), VCM=1.2V

LVDS Differential Input Low Threshold VTL(LVDS) -100 - - mV (5) VCM=1.2V

LVDS Common Mode Voltage VCM 1.125 - 1.375 V (5) LVDS Differential Input Voltage |VID| 100 - 600 mV (5) Terminating Resistor RT - 100 - Ohm Power per EBL WG PEBL - 1.4 - W (4) Note (1) The ambient temperature is Ta = 25 ± 2 ºC.

Note (2) IRUSH: the maximum current when VCC is rising

IIS: the maximum current of the first 100ms after power-on

Measurement Conditions: Shown as the following figure. Test pattern: black.

Vcc rising time is 470us

R1

(High to Low) (Control Signal)

+12V

SW Q2

C1

1uF

Vcc +3.3V

2SK1470

Q1 2SK1475

47K

R2

1K

VR1 47K C2

0.01uF

C3 1uF

FUSE (LCD Module Input)

470us

+3.3V

0V

0.9Vcc

0.1Vcc

VCC

IIS

ICC

IRUSH

100ms

www.yslcd.com.tw


Approval


Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, fv = 60

Hz, whereas a power dissipation check pattern below is displayed.

Note (4) The specified power are the sum of LCD panel electronics input power and the converter input

power. Test conditions are as follows.

(a) Vcc = 3.3 V, Ta = 25 ± 2 ºC, fv = 60 Hz,

(b) The pattern used is a black and white 32 x 36 checkerboard, slide #100 from the VESA file

“Flat Panel Display Monitor Setup Patterns”, FPDMSU.ppt.

(c) Luminance: 60 nits.

Note (5) The parameters of LVDS signals are defined as the following figures.

Active Area

a. White Pattern

Active Area

b. Black Pattern

0V

VCM |VID|

Single Ended

0V

|VID| VTH(LVDS)

VTL(LVDS)

Differential

www.yslcd.com.tw


Approval


3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC Value

Parameter Symbol Min. Typ. Max. Unit Note

LED light bar input voltage VL 27.0 30.6 VRMS (1), (Duty 100%)

LED light bar input current IL 120 mARMS (1), (Duty 100%)

Power Consumption PL 3.24 3.68 W (2), IL = 120 mALED Life Time LBL 10000 - - Hrs (3)

Note (1) LED current is measured by utilizing a high frequency current meter as shown below:

Note (2) PL = Io ×Vo

Note (3) The lifetime of LED is defined as the time when it continues to operate under the conditions at

Ta = 25 ±2 oC and I = 20 mA(Per EA) until the brightness becomes ≦ 50% of its original value

9

www.yslcd.com.tw


Approval


4. BLOCK DIAGRAM 4.1 TFT LCD MODULE

VEDID

DataEDID

Vcc

GND

Converter

Input Signals

LVDS Display

Data & Clock

TFT LCD PANEL

DATA DRIVER IC

SCA

N D

RIVER

IC

BACKLIGHT UNIT

LVDS INPUT / TIMING CONTROLLER

DC/DC CONVERTER &REFERENCE VOLTAGE

GENERATOR

INPU

T CO

NN

ECTO

R

LED CONVERTER

EDID EEPROM

CLKEDID

www.yslcd.com.tw


Approval


5. INPUT TERMINAL PIN ASSIGNMENT 5.1 TFT LCD MODULE

Pin Symbol Description Polarity Remark 1 VSS Ground 2 NC no connect 3 VDD Logic power 3.3V 4 VDD Logic power 3.3V 5 VDD Logic power 3.3V 6 VEDID EDID 3.3V power DDC 3.3V Power 7 NC no connect 8 CLK EDID clock DDC Clock 9 DATA EDID data DDC Data 10 VSS Ground 11 VSS Ground 12 NC no connect

13 RIN0- - LVDS differential data input (R0-R5, G0) Negative

14 RIN0+ + LVDS differential data input (R0-R5, G0) Positive

R0~R5,G0

15 VSS0 Ground-LVDS0

16 RIN1- - LVDS differential data input (G1-G5, B0-B1) Negative

17 RIN1+ + LVDS differential data input (G1-G5, B0-B1) Positive

G1~G5, B0, B1


19 RIN2- - LVDS differential data input (B2-B5,HS,VS, DE) Negative

20 RIN2+ + LVDS differential data input (B2-B5,HS,VS, DE) Positive

B2~B5, DE, Hsync, Vsync

21 VSS2 Ground-LVDS2 22 CLK- - LVDS differential clock input 23 CLK+ + LVDS differential clock input LVDS Level Clock


25 INV_PWM / R_PWM PWM brightness control

26 LED_Enable Enable LED 27 VSS LED Ground 28 VSS LED Ground 29 VSS LED Ground 30 VSS LED Ground 31 NC no connect 32 VBL+ 7V - 20V LED power 33 VBL+ 7V - 20V LED power 34 VBL+ 7V - 20V LED power 35 VBL+ 7V - 20V LED power 36 VBL+ 7V - 20V LED power 37 NC no connect 38 NC no connect 39 NC no connect 40 VSS Ground

Note (1) Connector Part No.: 20347- 140E-02(I-PEX) or equivalent

Note (2) User’s connector Part No: 20345-040T-02 (I-PEX) or equivalent

www.yslcd.com.tw


Approval


Note (3) The first pixel is odd as shown in the following figure.

www.yslcd.com.tw


Approval


5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL

IN6 IN5 IN4 IN3 IN2 IN1 IN0



G0 R3 R2 R1 R0 R5 R4

B1 G4 G3 G2 G1 B0 G5

DE B5 B4 B3 B2 Vsync Hsync

T/7

Signal for 1 DCLK Cycle (T)

Rxin0

Rxin1

Rxin2

CLK+

www.yslcd.com.tw


Approval


5.3 COLOR DATA INPUT ASSIGNMENT The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input. Data Signal

Red Green Blue Color R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0

Basic Colors

Black Red Green Blue Cyan Magenta Yellow White

01000111

0 1 0 0 0 1 1 1

0 1 0 0 0 1 1 1

0 1 0 0 0 1 1 1

01000111

01000111

00101011

00101011

00101011

00101011

00101011

00101011

0 0 0 1 1 1 0 1

0 0 0 1 1 1 0 1

0 0 0 1 1 1 0 1

0 0 0 1 1 1 0 1

00011101

00011101

Gray Scale Of Red

Red(0)/Dark Red(1) Red(2)

: :

Red(61) Red(62) Red(63)

000::111

0 0 0 : : 1 1 1

0 0 0 : : 1 1 1

0 0 0 : : 1 1 1

001::011

010::101

000::000

000::000

000::000

000::000

000::000

000::000

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

000::000

000::000

Gray Scale Of Green

Green(0)/Dark Green(1) Green(2)

: :

Green(61) Green(62) Green(63)

000::000

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

000::000

000::000

000::111

000::111

000::111

000::111

001::011

010::101

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

000::000

000::000

Gray Scale Of Blue

Blue(0)/Dark Blue(1) Blue(2)

: :

Blue(61) Blue(62) Blue(63)

000::000

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

0 0 0 : : 0 0 0

000::000

000::000

000::000

000::000

000::000

000::000

000::000

000::000

0 0 0 : : 1 1 1

0 0 0 : : 1 1 1

0 0 0 : : 1 1 1

0 0 0 : : 1 1 1

001::011

010::101

Note (1) 0: Low Level Voltage, 1: High Level Voltage

www.yslcd.com.tw


Approval


5.4 EDID DATA STRUCTURE The EDID (Extended Display Identification Data) data formats are to support displays as defined in the VESA Plug &

Display and FPDI standards.

Byte # (decimal)

Byte # (hex) Field Name and Comments Value

(hex) Value (binary)

0 0 Header 00 000000001 1 Header FF 111111112 2 Header FF 111111113 3 Header FF 111111114 4 Header FF 111111115 5 Header FF 111111116 6 Header FF 111111117 7 Header 00 000000008 8 EISA ID manufacturer name (“CMO”) 0D 000011019 9 EISA ID manufacturer name (Compressed ASCII) AF 1010111110 0A ID product code (N133I6-L0A) 13 0001001111 0B ID product code (hex LSB first; N133I6-L0A) 13 0001001112 0C ID S/N (fixed “0”) 00 0000000013 0D ID S/N (fixed “0”) 00 0000000014 0E ID S/N (fixed “0”) 00 0000000015 0F ID S/N (fixed “0”) 00 0000000016 10 Week of manufacture (fixed week code) 23 0010001117 11 Year of manufacture (fixed year code) 12 0001001018 12 EDID structure version # (“1”) 01 0000000119 13 EDID revision # (“3”) 03 0000001120 14 Video I/P definition (“digital”) 80 1000000021 15 Active area horizontal 28.608cm 1D 0001110122 16 Active area vertical 17.88cm 13 0001001123 17 Display Gamma (Gamma = ”2.2”) 78 0111100024 18 Feature support (“Active off, RGB Color”) 0A 0000101025 19 Red/Green (Rx1, Rx0, Ry1, Ry0, Gx1, Gx0, Gy1, Gy0) 5C 0101110026 1A Blue/White (Bx1, Bx0, By1, By0, Wx1, Wx0, Wy1, Wy0) 80 1000000027 1B Red-x (Rx = “0.622”) 98 1001100028 1C Red-y (Ry = “0.346”) 58 0101100029 1D Green-x (Gx = ”0.333”) 51 0101000130 1E Green-y (Gy = ”0.528”) 8E 1000111031 1F Blue-x (Bx = ”0.164”) 27 0010011132 20 Blue-y (By = ”0.162”) 25 0010010133 21 White-x (Wx = ”0.313”) 50 0101000034 22 White-y (Wy = ”0.329”) 54 0101010035 23 Established timings 1 00 0000000036 24 Established timings 2 00 0000000037 25 Manufacturer’s reserved timings 00 0000000038 26 Standard timing ID # 1 01 0000000139 27 Standard timing ID # 1 01 00000001

www.yslcd.com.tw


Approval


40 28 Standard timing ID # 2 01 0000000141 29 Standard timing ID # 2 01 0000000142 2A Standard timing ID # 3 01 0000000143 2B Standard timing ID # 3 01 0000000144 2C Standard timing ID # 4 01 0000000145 2D Standard timing ID # 4 01 0000000146 2E Standard timing ID # 5 01 0000000147 2F Standard timing ID # 5 01 0000000148 30 Standard timing ID # 6 01 0000000149 31 Standard timing ID # 6 01 0000000150 32 Standard timing ID # 7 01 0000000151 33 Standard timing ID # 7 01 0000000152 34 Standard timing ID # 8 01 0000000153 35 Standard timing ID # 8 01 00000001

54 36 Detailed timing description # 1 Pixel clock (“71MHz”, According to VESA CVT Rev1.1) BC 10111100

55 37 # 1 Pixel clock (hex LSB first) 1B 0001101156 38 # 1 H active (“1280”) 00 0000000057 39 # 1 H blank (“160”) A0 1010000058 3A # 1 H active : H blank (“1280 : 160”) 50 0101000059 3B # 1 V active (”800”) 20 0010000060 3C # 1 V blank (”23”) 17 0001011161 3D # 1 V active : V blank (”800 :23”) 30 0011000062 3E # 1 H sync offset (”48”) 30 0011000063 3F # 1 H sync pulse width ("32”) 20 0010000064 40 # 1 V sync offset : V sync pulse width (”3 : 6”) 36 00110110

65 41 # 1 H sync offset : H sync pulse width : V sync offset : V sync width (”48: 32 : 3 : 6”) 00 00000000

66 42 # 1 H image size (”286 mm”) 1E 0001111067 43 # 1 V image size (”179 mm”) B3 1011001168 44 # 1 H image size : V image size (”286 : 179”) 10 0001000069 45 # 1 H boarder (”0”) 00 0000000070 46 # 1 V boarder (”0”) 00 00000000

71 47 # 1 Non-interlaced, Normal, no stereo, Separate sync, H/V pol Negatives 19 00011001

72 48 Detailed timing description # 2 00 0000000073 49 # 2 Flag 00 0000000074 4A # 2 Reserved 00 00000000

75 4B # 2 FE (hex) defines ASCII string (Model Name “N133I6-L0A”, ASCII) FE 11111110

76 4C # 2 Flag 00 0000000077 4D # 2 1st character of name (“N”) 4E 0100111078 4E # 2 2nd character of name (“1”) 31 0011000179 4F # 2 3rd character of name (“3”) 33 0011001180 50 # 2 4th character of name (“3”) 33 0011001181 51 # 2 5th character of name (“I”) 49 0100100182 52 # 2 6th character of name (“6”) 36 0011011083 53 # 2 7th character of name (“-”) 2D 0010110184 54 # 2 8th character of name (“L”) 4C 01001100

www.yslcd.com.tw


Approval


85 55 # 2 9th character of name (“0”) 30 0011000086 56 # 2 9th character of name (“A”) 41 0100000187 57 # 2 New line character indicates end of ASCII string 0A 0000101088 58 # 2 Padding with “Blank” character 20 0010000089 59 # 2 Padding with “Blank” character 20 0010000090 5A Detailed timing description # 3 00 0000000091 5B # 3 Flag 00 0000000092 5C # 3 Reserved 00 0000000093 5D # 3 FE (hex) defines ASCII string (Vendor “CMO”, ASCII) FE 1111111094 5E # 3 Flag 00 0000000095 5F # 3 1st character of string (“C”) 43 0100001196 60 # 3 2nd character of string (“M”) 4D 0100110197 61 # 3 3rd character of string (“O”) 4F 0100111198 62 # 3 New line character indicates end of ASCII string 0A 0000101099 63 # 3 Padding with “Blank” character 20 00100000100 64 # 3 Padding with “Blank” character 20 00100000101 65 # 3 Padding with “Blank” character 20 00100000102 66 # 3 Padding with “Blank” character 20 00100000103 67 # 3 Padding with “Blank” character 20 00100000104 68 # 3 Padding with “Blank” character 20 00100000105 69 # 3 Padding with “Blank” character 20 00100000106 6A # 3 Padding with “Blank” character 20 00100000107 6B # 3 Padding with “Blank” character 20 00100000108 6C Detailed timing description # 4 00 00000000109 6D # 4 Flag 00 00000000110 6E # 4 Reserved 00 00000000

111 6F # 4 FE (hex) defines ASCII string (Model Name“N133I6-L0A”, ASCII) FE 11111110

112 70 # 4 Flag 00 00000000113 71 # 4 1st character of name (“N”) 4E 01001110114 72 # 4 2nd character of name (“1”) 31 00110001115 73 # 4 3rd character of name (“3”) 33 00110011116 74 # 4 4th character of name (“3”) 33 00110011117 75 # 4 5th character of name (“I”) 49 01001001118 76 # 4 6th character of name (“6”) 36 00110110119 77 # 4 7th character of name (“-”) 2D 00101101120 78 # 4 8th character of name (“L”) 4C 01001100121 79 # 4 9th character of name (“0”) 30 00110000122 7A # 4 9th character of name (“A”) 41 01000001123 7B # 4 New line character indicates end of ASCII string 0A 00001010124 7C # 4 Padding with “Blank” character 20 00100000125 7D # 4 Padding with “Blank” character 20 00100000126 7E Extension flag 00 00000000127 7F Checksum 2D 00101101

www.yslcd.com.tw


Approval


6 CONVERTER SPECIFICATION 6.1 ABSOLUTE MAXIMUM RATINGS

Symbol Ratings Vin 40.0V Gnd +/-0.3V

PWM, EN -0.3V~6.0V

6.2 RECOMMENDED OPERATING RATINGS Value Parameter Symbol Min. Typ. Max. Unit Note

Converter Input power supply voltage Vin 7.0 12.0 21.0 V Backlight on 2.0 --- 5.5 V EN Control Level Backlight off 0 --- 0.8 V PWM High Level 2.0 --- 5.5 V PWM Control Level PWM Low Level 0 --- 0.8 V

PWM Control Duty Ratio 20 100 % PWM Control Frequency fPWM 180 200 220 Hz

Vin=7 V 600 650 mA (1) Converter Input Current Vin=21V IBL 200 220 mA (2) Note (1) The specified LED power supply current is under the conditions at Vin = 7 V, Ta = 25 ± 2 ºC, fPWM =

200 Hz, Duty=100%.

Note (2) The specified LED power supply current is under the conditions at Vin = 21V, Ta = 25 ± 2 ºC, fPWM

= 200 Hz, Duty=100%.

www.yslcd.com.tw


Approval


7. INTERFACE TIMING 7.1 INPUT SIGNAL TIMING SPECIFICATIONS

The specifications of input signal timing are as the following table and timing diagram. Signal Item Symbol Min. Typ. Max. Unit Note

DCLK Frequency 1/Tc 50 71 80 MHz - Vertical Total Time TV 803 823 1028 TH -

Vertical Addressing Time TVD 800 800 800 TH - Vertical Active Blanking Period TVB TV-TVD 23 TV-TVD TH

Horizontal Total Time TH 1362 1440 1800 Tc - Horizontal Addressing Time THD 1280 1280 1280 Tc -

DE

Horizontal Active Blanking Period THB TH-THD 160 TH-THD Tc Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.

INPUT SIGNAL TIMING DIAGRAM

TH

TC DCLK

THD

TVD

Tv

DE

DE

DATA

www.yslcd.com.tw


Approval


7.2 POWER ON/OFF SEQUENCE

Timing Specifications:

0.5 ≦ t1 ≦ 10 ms

0 ≦ t2 ≦ 50 ms

0 ≦ t3 ≦ 50 ms

t4 ≧ 500 ms

t5 ≧ 200 ms

t6 ≧ 200 ms

Note (1) Please follow the power on/off sequence described above. Otherwise, the LCD module might be

damaged.

Note (2) Please avoid floating state of interface signal at invalid period. When the interface signal is invalid, be

sure to pull down the power supply of LCD Vcc to 0 V.

Note (3) The Backlight converter power must be turned on after the power supply for the logic and the

interface signal is valid. The Backlight converter power must be turned off before the power supply

for the logic and the interface signal is invalid.

Note (4) Sometimes some slight noise shows when LCD is turned off (even backlight is already off). To

avoid this phenomenon, we suggest that the Vcc falling time is better to follow 5≦t7≦300 ms.

- Power Supply for LCD, Vcc

- LVDS Interface

- Power for Lamp

Restart Power On Power Off

50%50%

0V

0V 10%

t6 t5

t4 t3 t2

t1

90%

10%

90%

Valid Data

ONOFF OFF

t7

10%

www.yslcd.com.tw


Approval


8 OPTICAL CHARACTERISTICS 8.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta 25±2 oC Ambient Humidity Ha 50±10 %RH Supply Voltage VCC 3.4 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" LED Light Bar Input Current IL (120) mA The measurement methods of optical characteristics are shown in Section 7.2. The following items

should be measured under the test conditions described in Section 7.1 and stable environment shown in

Note (6).

8.2 OPTICAL SPECIFICATIONS Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 200 300 - (2), (5)TR - 5 10 ms Response Time TF - 11 16 ms

(3)

Average Luminance of White LAVE 240 300 cd/m2 (4), (5)White Variation δW 1.4 - (5), (6)

Rx 0.584 - Red Ry 0.337 - Gx 0.331 - Green Gy 0.572 - Bx 0.156 - Blue By 0.133 - Wx 0.313 -

Color Chromaticity

White Wy

θx=0°, θY =0° Viewing Normal

Angle TYP-0.05

0.329

TYP +0.05

- θx+ 40 45 Horizontal θx- 40 45 θY+ 15 20

Viewing Angle Vertical

θY-

CR≥10

40 45

Deg.

(1)

www.yslcd.com.tw


Approval


Note (1) Definition of Viewing Angle (θx, θy):

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L63 / L0

L63: Luminance of gray level 63

L 0: Luminance of gray level 0

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (TR, TF) and measurement method:

12 o’clock direction

θy+ = 90º

6 o’clock

θy- = 90º

θx− θx+

θy- θy+

x- y+

y- x+

Normal

θx = θy = 0º

θX+ = 90º

θX- = 90º

100%

90%

10%

0%

Gray Level 63

Gray Level 0

Gray Level 63

Time TF

Optical

Response

TR

66.67 ms 66.67 ms

www.yslcd.com.tw


Approval


Note (4) Definition of Average Luminance of White (LAVE):

Measure the luminance of gray level 63 at 5 points

LAVE = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5

L (x) is corresponding to the luminance of the point X at Figure in Note (6).

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 15 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 15 minutes in a windless room.

CS-1000T

500 mm

LCD Module

LCD Panel

Center of the ScreenLight Shield Room

(Ambient Luminance < 2 lux)

USB2000

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 63 at 5 points

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

D

W

Active Area

Verti

cal L

ine

Horizontal Line

: Test Point

X=1 to 5

5

1 2

3 4

D/4 D/2 3D/4

W/4

W/2

3W/4

X

www.yslcd.com.tw


Approval


9. PRECAUTIONS 9.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will

be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions.

(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly, and the starting voltage of CCFL will be higher than room

temperature.

9.2 SAFETY PRECAUTIONS (1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with converter. Do not disassemble the module or insert anything into the Backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

9.3 OPERATION PRECAUTIONS (1) Do not pull the I/F connector in or out while the module is operating.

(2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This

can prevent the CMOS LSI chips from damage during latch-up.

www.yslcd.com.tw


Approval


10. PACKAGING

10.1 CARTON

Figure. 9-1 Packing method

www.yslcd.com.tw


Approval


10.2 PALLET

Figure. 9-2 Packing method

www.yslcd.com.tw


Approval


11. DEFINITION OF LABELS 11.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following

explanation.

(a) Model Name: N133I6 - L0A

(b) Revision: Rev. XX, for example: A1, …, C1, C2 …etc.

(c) Serial ID: X X X X X X X Y M D X N N N N

(d) Production Location: MADE IN XXXX. XXXX stands for production location.

Serial ID includes the information as below:

(a) Manufactured Date: Year: 1~9, for 2001~2009

Month: 1~9, A~C, for Jan. ~ Dec.

Day: 1~9, A~Y, for 1st to 31st, exclude I , O and U

(b) Revision Code: cover all the change

(c) Serial No.: Manufacturing sequence of product

Year, Month, Date CMO Internal Use Revision

Serial No. CMO Internal Use

CMO Internal Use

www.yslcd.com.tw


Approval


11.2 CMO CARTON LABEL

www.yslcd.com.tw

www.yslcd.com.tw

Documents

MODEL NO.: N133I6 - L0A h É Õ Ó · Doc No.: 44082403 Issued Date: Jul. 10, 2008 Model No.: N133I6 - L0A Approval 1 / 30 The information described in this technical specification