Embed Size (px)
Citation preview
Model 3101RC ADSL2/2+ Triple-Play Access IPDSLAM ModuleAdministrator’s Reference Guide
Sales Office: +1 (301) 975-1000Technical Support: +1 (301) 975-1007
E-mail: [email protected]: www.patton.com
Part Number: 07M3101RC-ARG, Rev. BRevised: February 21, 2012
Patton Electronics Company, Inc.7622 Rickenbacker Drive
Gaithersburg, MD 20879 USAtel: +1 (301) 975-1000fax: +1 (301) 869-9293
support: +1 (301) 975-1007web: www.patton.com
e-mail: [email protected]
CopyrightCopyright © 2012, Patton Electronics Company. All rights reserved.
NoticeThe information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.
The software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license.
1
Summary Table of Contents
1 Operator Interface........................................................................................................................................... 4
2 Global Commands......................................................................................................................................... 10
3 Initialize Mode Commands ........................................................................................................................... 13
4 Enable Mode Commands .............................................................................................................................. 15
5 Configure Mode Commands ......................................................................................................................... 49
6 Ethernet Interface and Interface Mode Commands....................................................................................... 91
7 ATM Bridge Mode Commands ..................................................................................................................... 95
8 GBE Bridge and GBE-LA Bridge Mode Commands ................................................................................... 101
9 ADSL Configure Mode Commands ............................................................................................................ 109
10 Access List Mode Commands ...................................................................................................................... 113
11 ATM Description Mode Commands ........................................................................................................... 125
12 Priority List Mode Commands.................................................................................................................... 131
13 Alarm Profile Mode Commands.................................................................................................................. 141
14 IGMP-ACL Profile Mode Commands......................................................................................................... 145
15 Service Profile Configure Mode Commands ............................................................................................... 147
16 Spectrum Profile Configure Mode Commands ........................................................................................... 151
17 TCA Profile Mode Commands.................................................................................................................... 159
18 Contacting Patton for assistance ................................................................................................................. 161
A ADSL Operational Mask Table .................................................................................................................. 165
B Alarm Table ................................................................................................................................................ 167
Table of Contents
Audience................................................................................................................................................................. 2
Structure................................................................................................................................................................. 2
1 Operator Interface........................................................................................................................................... 4Introduction............................................................................................................................................................5
Connect Interface ....................................................................................................................................................5
Authorization Level .................................................................................................................................................5Screen Description ..................................................................................................................................................6
Execution Modes.....................................................................................................................................................6
Getting Help ...........................................................................................................................................................7Terminal Key Functions..........................................................................................................................................7
Notation Conventions.............................................................................................................................................8
About String-type Parameters ..................................................................................................................................8
2 Global Commands......................................................................................................................................... 10Global Commands ................................................................................................................................................11
bye ..................................................................................................................................................................11
disable .............................................................................................................................................................11exit ..................................................................................................................................................................11
help .................................................................................................................................................................11
list opmode .....................................................................................................................................................11system name ....................................................................................................................................................12
system restart ..................................................................................................................................................12
3 Initialize Mode Commands ........................................................................................................................... 13Initialize Mode Commands ...................................................................................................................................14
enable .............................................................................................................................................................14
show license ....................................................................................................................................................14
show time .......................................................................................................................................................14show uptime ...................................................................................................................................................14
show version ...................................................................................................................................................14
4 Enable Mode Commands .............................................................................................................................. 15Enable Mode Commands ......................................................................................................................................18
configure .........................................................................................................................................................18
ping ................................................................................................................................................................18
show access-list bcrate .....................................................................................................................................18show access-list dstip .......................................................................................................................................19
show access-list ipprotocol ..............................................................................................................................19
show access-list l4dstport ................................................................................................................................19show access-list mcfldrate ................................................................................................................................20
show access-list srcip .......................................................................................................................................20
show access-list srcmac ....................................................................................................................................20
1
Model 3101RC Admin Reference Guide Table of Contents
show access-list outportrate .............................................................................................................................20
show access-list outportrate xdsl ......................................................................................................................21
show access-list outportrate gigabit ..................................................................................................................21show access-list policer ....................................................................................................................................21
show account ..................................................................................................................................................21
show aging ......................................................................................................................................................22show alarm current .........................................................................................................................................22
show alarm event ............................................................................................................................................22
show alarm history ..........................................................................................................................................22show atmdesc ..................................................................................................................................................22
show atm-loopback .........................................................................................................................................22
show cli-config ................................................................................................................................................23
show cpu .........................................................................................................................................................23show dsl-line-identify ......................................................................................................................................23
show fdb .........................................................................................................................................................23
show fdbstatic .................................................................................................................................................23show firmware .................................................................................................................................................24
show help ........................................................................................................................................................24
show http ........................................................................................................................................................24show igmp ......................................................................................................................................................24
show igmp group ............................................................................................................................................24
show igmp rtport ............................................................................................................................................25show igmp-acl bind .........................................................................................................................................25
show interface .................................................................................................................................................25
show interface xdsl {all | <port>} adsl carrier fe ds snr ......................................................................................25show interface xdsl {all | <port>} adsl carrier fe ds qln ......................................................................................26
show interface xdsl {all | <port>} adsl carrier fe ds hlin ....................................................................................26
show interface xdsl {all | <port>} adsl carrier fe ds hlog ....................................................................................26show interface xdsl {all | <port>} adsl carrier fe us load ....................................................................................27
show interface xdsl {all | <port>} adsl carrier fe us gain ....................................................................................27
show interface xdsl {all | <port>} adsl carrier fe us tss .......................................................................................27show interface xdsl {all | <port>} adsl carrier ne us snr .....................................................................................28
show interface xdsl {all | <port>} adsl carrier ne us qln .....................................................................................28
show interface xdsl {all | <port>} adsl carrier ne us hlin ...................................................................................28show interface xdsl {all | <port>} adsl carrier ne us hlog ...................................................................................29
show interface xdsl {all | <port>} adsl carrier ne ds load ...................................................................................29
show interface xdsl {all | <port>} adsl carrier ne ds gain ...................................................................................29show interface xdsl {all | <port>} adsl carrier ne ds tss ......................................................................................30
show interface xdsl {all | <port>} adsl channel .................................................................................................30
show interface xdsl {all | <port>} adsl failure ....................................................................................................30show interface xdsl {all | <port>} adsl line ........................................................................................................31
show interface xdsl {all | <port>} adsl line config .............................................................................................31
show interface xdsl {all | <port>} adsl line delt-test ..........................................................................................31show interface xdsl {all | <port>} adsl line information ....................................................................................32
2
Model 3101RC Admin Reference Guide Table of Contents
show interface xdsl {all | <port>} adsl inventory ...............................................................................................32
show interface xdsl {all | <port>} adsl operational ............................................................................................32
show interface xdsl {all | <port>} bridge ...........................................................................................................33show interface xdsl {all | <port>} cellcount ......................................................................................................33
show interface xdsl {all | <port>} counter .........................................................................................................33
show interface xdsl {all | <port>} vlan ..............................................................................................................34show interface xdsl {all | <port>} vc .................................................................................................................34
show interface bridge ......................................................................................................................................34
show interface counter ....................................................................................................................................34show interface gigabit [<port>] bridge .............................................................................................................35
show interface gigabit [<port>] counter ...........................................................................................................35
show interface gigabit [<port>] stp ..................................................................................................................35
show interface gigabit [<port>] vlan ................................................................................................................36show interface gigabit la bridge .......................................................................................................................36
show interface gigabit la counter .....................................................................................................................36
show interface gigabit la lacp ...........................................................................................................................36show interface gigabit la vlan ...........................................................................................................................36
show lacp ........................................................................................................................................................37
show management all ......................................................................................................................................37show management dhcp ..................................................................................................................................37
show management gbe ....................................................................................................................................37
show management mtu ...................................................................................................................................37show management mgmt ................................................................................................................................37
show pm <port> adsl day ................................................................................................................................38
show pm <port> adsl interval ..........................................................................................................................38show priority-list ds .........................................................................................................................................39
show priority-list dstip ....................................................................................................................................39
show priority-list dstmac .................................................................................................................................39show priority-list srcip .....................................................................................................................................40
show priority-list srcmac .................................................................................................................................40
show priority-list tos .......................................................................................................................................40show priority-list vlanid ..................................................................................................................................41
show priority-regen .........................................................................................................................................41
show profile alarm all ......................................................................................................................................41show profile igmp-acl ......................................................................................................................................41
show profile service adsl ..................................................................................................................................42
show profile spectrum adsl ..............................................................................................................................42show profile tca adsl ........................................................................................................................................42
show rmon alarm ............................................................................................................................................43
show rmon ether_history ................................................................................................................................43show rmon event .............................................................................................................................................43
show rmon history ..........................................................................................................................................44
show rmon log ................................................................................................................................................44show rmon statistic .........................................................................................................................................44
3
Model 3101RC Admin Reference Guide Table of Contents
show route ......................................................................................................................................................44
show runningcfg .............................................................................................................................................45
show snmp ......................................................................................................................................................45show sntp ........................................................................................................................................................45
show stp ..........................................................................................................................................................45
show syslog server ...........................................................................................................................................45show system ....................................................................................................................................................45
show temperature ............................................................................................................................................46
show time .......................................................................................................................................................46show uptime ...................................................................................................................................................46
show version ...................................................................................................................................................46
show version detail ..........................................................................................................................................46
show vlan ........................................................................................................................................................47telnet ...............................................................................................................................................................47
traceroute ........................................................................................................................................................47
traceroute no_icmp .........................................................................................................................................48
5 Configure Mode Commands ......................................................................................................................... 49Configure Mode Commands.................................................................................................................................52
access-list ........................................................................................................................................................52
account add ....................................................................................................................................................52account delete .................................................................................................................................................53
account modify ...............................................................................................................................................53
acl service ........................................................................................................................................................54aging ...............................................................................................................................................................54
alarm event clear .............................................................................................................................................54
alarm history clear ...........................................................................................................................................54atmdesc ...........................................................................................................................................................54
atm-loopback ..................................................................................................................................................56
cli-config session .............................................................................................................................................56cli-config timeout ............................................................................................................................................57
dsl-line-identify dhcp ......................................................................................................................................57
dsl-line-identify dhcp option82 circuit ............................................................................................................57dsl-line-identify dhcp option82 dslam-name ...................................................................................................57
dsl-line-identify dhcp option82 sub ................................................................................................................57
dsl-line-identify pppoe srv-name .....................................................................................................................58fdbstatic ..........................................................................................................................................................58
fdbstatic disable ...............................................................................................................................................59
fdbstatic list .....................................................................................................................................................59firmware login .................................................................................................................................................60
firmware get ....................................................................................................................................................60
firmware write .................................................................................................................................................60firmware partition ...........................................................................................................................................61
http port .........................................................................................................................................................61
4
Model 3101RC Admin Reference Guide Table of Contents
igmp acl ..........................................................................................................................................................61
igmp default ....................................................................................................................................................61
igmp disable ....................................................................................................................................................61igmp proxy ......................................................................................................................................................62
igmp snooping ................................................................................................................................................62
igmp rtport gigabit ..........................................................................................................................................62igmp rtport list ................................................................................................................................................62
igmp timeout ..................................................................................................................................................63
igmp version ...................................................................................................................................................63interface gigabit ...............................................................................................................................................63
interface gigabit la ...........................................................................................................................................63
interface xdsl ...................................................................................................................................................64
management dhcp ...........................................................................................................................................64management dhcp timeout .............................................................................................................................64
management dhcp leasetime ............................................................................................................................64
management gbe .............................................................................................................................................65management mgmt .........................................................................................................................................65
pm clear ..........................................................................................................................................................66
priority-list ......................................................................................................................................................66profile alarm ....................................................................................................................................................66
profile igmp-acl ...............................................................................................................................................66
profile service adsl ...........................................................................................................................................67profile spectrum ..............................................................................................................................................67
profile tca xdsl .................................................................................................................................................67
remotecfg login ...............................................................................................................................................68restore-factory .................................................................................................................................................68
rmon alarm <index> alarm_interval ................................................................................................................69
rmon alarm <index> delete ..............................................................................................................................69rmon alarm <index> falling_eventindex ..........................................................................................................70
rmon alarm <index> falling_threshold ............................................................................................................70
rmon alarm <index> owner .............................................................................................................................71rmon alarm <index> sample_type ...................................................................................................................71
rmon alarm <index> startup_alarm .................................................................................................................71
rmon alarm <index> variable ...........................................................................................................................72rmon event <index> community .....................................................................................................................73
rmon event <index> delete ..............................................................................................................................73
rmon event <index> description ......................................................................................................................74rmon event <index> owner .............................................................................................................................74
rmon event <index> type ................................................................................................................................75
rmon history <index> buckets_requested ........................................................................................................75rmon history <index> delete ............................................................................................................................75
rmon history <index> ifc .................................................................................................................................76
rmon history <index> interval .........................................................................................................................76rmon history <index> owner ...........................................................................................................................77
5
Model 3101RC Admin Reference Guide Table of Contents
rmon statistic <index> delete ...........................................................................................................................77
rmon statistic <index> ifc ................................................................................................................................78
rmon statistic <index> owner ..........................................................................................................................78route ...............................................................................................................................................................79
route default ...................................................................................................................................................79
route delete .....................................................................................................................................................79runningcfg active partition ..............................................................................................................................80
runningcfg load partition ................................................................................................................................80
runningcfg login .............................................................................................................................................80runningcfg write partition ...............................................................................................................................81
snmp community ............................................................................................................................................81
snmp notify ....................................................................................................................................................82
snmp target <name> address ...........................................................................................................................82snmp target <name> delete .............................................................................................................................83
snmp target <name> tag-list ............................................................................................................................83
sntp polling interval ........................................................................................................................................83sntp server address ...........................................................................................................................................84
stp ...................................................................................................................................................................84
stp enable ........................................................................................................................................................84stp disable .......................................................................................................................................................84
stp forward delay .............................................................................................................................................84
stp hello time ..................................................................................................................................................85stp max-age .....................................................................................................................................................85
stp priority ......................................................................................................................................................85
stp version .......................................................................................................................................................85syslog server ....................................................................................................................................................86
trunk-mode .....................................................................................................................................................86
temperature threshold .....................................................................................................................................86temperature shelf time .....................................................................................................................................87
time set date ....................................................................................................................................................87
time set time ...................................................................................................................................................88time set timezone ............................................................................................................................................89
6 Ethernet Interface and Interface Mode Commands....................................................................................... 91Ethernet Interface Mode Commands.....................................................................................................................92
bridge ..............................................................................................................................................................92gbe admin .......................................................................................................................................................92
gbe speed ........................................................................................................................................................92
Interface Mode Commands ...................................................................................................................................93bridge ..............................................................................................................................................................93
adsl-config ......................................................................................................................................................93
7 ATM Bridge Mode Commands ..................................................................................................................... 95ATM Bridge Mode Commands.............................................................................................................................96
accfrm .............................................................................................................................................................96
6
Model 3101RC Admin Reference Guide Table of Contents
default vlan .....................................................................................................................................................96
default prio .....................................................................................................................................................96
dhcp-relay .......................................................................................................................................................97egress ..............................................................................................................................................................97
igmp-acl bind ..................................................................................................................................................97
ingress .............................................................................................................................................................97isolation ..........................................................................................................................................................98
max-mac .........................................................................................................................................................98
priority-regen ..................................................................................................................................................98pvc ..................................................................................................................................................................99
pvc atmdesc ....................................................................................................................................................99
pvc encapsulation ............................................................................................................................................99
stack vlan ........................................................................................................................................................99vlan ...............................................................................................................................................................100
vlan list .........................................................................................................................................................100
8 GBE Bridge and GBE-LA Bridge Mode Commands ................................................................................... 101GBE Bridge Mode Commands............................................................................................................................102
accfrm ...........................................................................................................................................................102
default vlan ...................................................................................................................................................102
default prio ...................................................................................................................................................102egress ............................................................................................................................................................102
igmp-acl bind ................................................................................................................................................103
ingress ...........................................................................................................................................................103isolation ........................................................................................................................................................103
max-mac .......................................................................................................................................................103
stack vlan ......................................................................................................................................................104stpport edge ..................................................................................................................................................104
stpport enable/disable ...................................................................................................................................104
stpport pathcost ............................................................................................................................................104stpport priority ..............................................................................................................................................104
vlan ...............................................................................................................................................................105
vlan list .........................................................................................................................................................105GBE-LA Bridge Mode Commands......................................................................................................................106
accfrm ...........................................................................................................................................................106
default vlan ...................................................................................................................................................106default prio ...................................................................................................................................................106
egress ............................................................................................................................................................106
igmp-acl bind ................................................................................................................................................107ingress ...........................................................................................................................................................107
isolation ........................................................................................................................................................107
max-mac .......................................................................................................................................................107stack vlan ......................................................................................................................................................108
lacp actor priority system ..............................................................................................................................108
7
Model 3101RC Admin Reference Guide Table of Contents
lacp actor system id .......................................................................................................................................108
link mode ......................................................................................................................................................108
9 ADSL Configure Mode Commands ............................................................................................................ 109ADSL Configure Mode Commands ....................................................................................................................110
line mode carrier ...........................................................................................................................................110
line mode diagnostic .....................................................................................................................................110
line mode force-l3 .........................................................................................................................................110line mode mask .............................................................................................................................................110
line port ........................................................................................................................................................111
line profile .....................................................................................................................................................111
line status service ...........................................................................................................................................111
10 Access List Mode Commands ...................................................................................................................... 113Access List Mode Commands ..............................................................................................................................114
bcrate ............................................................................................................................................................114
bcrate list ......................................................................................................................................................114dstip ..............................................................................................................................................................115
dstip list ........................................................................................................................................................115
ipprotocol .....................................................................................................................................................116ipprotocol list ................................................................................................................................................117
l4dstport .......................................................................................................................................................117
l4dstport list ..................................................................................................................................................117mcfldrate list .................................................................................................................................................118
mcfldrate vlan ...............................................................................................................................................118
outportrate ....................................................................................................................................................119outportrate list ..............................................................................................................................................119
policer ...........................................................................................................................................................120
policer list .....................................................................................................................................................120pppoe deny ...................................................................................................................................................121
pppoe disable ................................................................................................................................................121
pppoe list ......................................................................................................................................................121srcip ..............................................................................................................................................................122
srcip list ........................................................................................................................................................122
srcmac ...........................................................................................................................................................123srcmac list .....................................................................................................................................................123
11 ATM Description Mode Commands ........................................................................................................... 125ATM Description Mode Commands...................................................................................................................126
cbr ................................................................................................................................................................126no atmdesc ....................................................................................................................................................126
ubr1 ..............................................................................................................................................................127
ubr2 ..............................................................................................................................................................127unshp ............................................................................................................................................................128
vbr1 ..............................................................................................................................................................128
vbr2 ..............................................................................................................................................................129
8
Model 3101RC Admin Reference Guide Table of Contents
vbr3 ..............................................................................................................................................................130
12 Priority List Mode Commands.................................................................................................................... 131Priority List Mode Commands ............................................................................................................................132
ds ..................................................................................................................................................................132ds list ............................................................................................................................................................133
dstip ..............................................................................................................................................................134
dstip list ........................................................................................................................................................135dstmac ..........................................................................................................................................................135
dstmac list .....................................................................................................................................................136
srcip ..............................................................................................................................................................136
srcip list ........................................................................................................................................................137srcmac ...........................................................................................................................................................137
srcmac list .....................................................................................................................................................138
tos .................................................................................................................................................................138tos list ...........................................................................................................................................................139
vlanid ............................................................................................................................................................139
vlanid list ......................................................................................................................................................140
13 Alarm Profile Mode Commands.................................................................................................................. 141Alarm Profile Mode Commands..........................................................................................................................142
alarm mask ....................................................................................................................................................142
alarm unmask ...............................................................................................................................................142alarm major ...................................................................................................................................................142
alarm minor ..................................................................................................................................................143
14 IGMP-ACL Profile Mode Commands......................................................................................................... 145IGMP-ACL Profile Mode Commands ................................................................................................................146
igmp-acl ........................................................................................................................................................146
igmp-acl rebind .............................................................................................................................................146
15 Service Profile Configure Mode Commands ............................................................................................... 147Service Profile Configure Mode Commands........................................................................................................148
bitrate ...........................................................................................................................................................148
delay .............................................................................................................................................................148
l2-packet .......................................................................................................................................................148mode .............................................................................................................................................................149
noise .............................................................................................................................................................149
noisemargin ..................................................................................................................................................149ra-interval .....................................................................................................................................................149
service name ..................................................................................................................................................150
16 Spectrum Profile Configure Mode Commands ........................................................................................... 151Spectrum Profile Configure Mode Commands....................................................................................................152
aggregate .......................................................................................................................................................152
bands ............................................................................................................................................................152
bands mask ...................................................................................................................................................153
9
Model 3101RC Admin Reference Guide Table of Contents
carriermask ...................................................................................................................................................153
modem features .............................................................................................................................................154
noisemargin ..................................................................................................................................................154opmode .........................................................................................................................................................154
pbomode .......................................................................................................................................................154
power-mgt disable .........................................................................................................................................155power-mgt l2 enable .....................................................................................................................................155
power-mgt l2_l3 enable ................................................................................................................................155
power-mgt l0-time ........................................................................................................................................155power-mgt l2-time ........................................................................................................................................156
power-mgt l2-atpr .........................................................................................................................................156
total power-mgt l2-atpr .................................................................................................................................156
psdlevel .........................................................................................................................................................157psdshape .......................................................................................................................................................157
rxaggregate ....................................................................................................................................................157
spectrum name ..............................................................................................................................................158status modify .................................................................................................................................................158
17 TCA Profile Mode Commands.................................................................................................................... 159TCA Profile Configure Mode Commands...........................................................................................................160
adsl-tca day ...................................................................................................................................................160adsl-tca disable ..............................................................................................................................................160
adsl-tca enable ...............................................................................................................................................160
adsl-tca interval .............................................................................................................................................160
18 Contacting Patton for assistance ................................................................................................................. 161Introduction........................................................................................................................................................162
Contact information............................................................................................................................................162
Warranty Service and Returned Merchandise Authorizations (RMAs).................................................................162Warranty coverage ........................................................................................................................................162
Out-of-warranty service ...........................................................................................................................162
Returns for credit ....................................................................................................................................162Return for credit policy ...........................................................................................................................163
RMA numbers ..............................................................................................................................................163
Shipping instructions ..............................................................................................................................163
A ADSL Operational Mask Table .................................................................................................................. 165ADSL Operational Mask Table ...........................................................................................................................166
B Alarm Table ................................................................................................................................................ 167Alarm Table ........................................................................................................................................................168
10
1
List of Figures
1 Screen Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1
List of Tables
1 Connect interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Authorization Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 List of Execution Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 List of Terminal Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 ADSL Operational Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1666 Alarm Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
About this guideThis user guide describes the commands and parameters of the Command Line Interface (CLI) as imple-mented in the current version of the Model 3101RC system software. These commands are used to set-up, administer and maintain the system. For detailed hardware or set-up information, refer to the product’s User Manual.
AudienceThis guide is intended for the following users:
• Operators
• Installers
• Maintenance technicians
StructureThis guide contains the following chapters and appendices:
• Chapter 1 on page 4 pexplains the operator interface
• Chapter 2 on page 10 provides information on the global commands
• Chapter 3 on page 13 provides information on the intialize mode commands
• Chapter 4 on page 15 provides information on the enable mode commands
• Chapter 5 on page 49 provides information on the configure mode commands
• Chapter 6 on page 91 provides information on the Ethernet interface and other interface mode commands
• Chapter 7 on page 95 provides information on the ATM bridge commands
• Chapter 8 on page 101 provides information on the GBE and GBE-LA bridge mode commands
• Chapter 9 on page 109 provides information on the ADSL configure mode commands
• Chapter 10 on page 113 provides information on the access list mode commands
• Chapter 11 on page 125 provides information on the ATM description mode commands
• Chapter 12 on page 131 provides information on the priority list mode commands
• Chapter 13 on page 141 provides information on the alarm profile mode commands
• Chapter 14 on page 145 provides information on the IGMP-ACL profile mode commands
• Chapter 15 on page 147 provides information on the service profile configure mode commands
• Chapter 16 on page 151 provides information on the spectrum profile configure mode commands
• Chapter 17 on page 159 provides information on the TCA profile mode commands
• Chapter 18 on page 161 provides information on contacting Patton for service and support
2
About this guide Model 3101RC Admin Reference Guide
3
Chapter 1 Operator Interface
Chapter contentsIntroduction............................................................................................................................................................5
Connect Interface ....................................................................................................................................................5
Authorization Level .................................................................................................................................................5Screen Description ..................................................................................................................................................6
Execution Modes.....................................................................................................................................................6
Getting Help ...........................................................................................................................................................7Terminal Key Functions..........................................................................................................................................7
Notation Conventions.............................................................................................................................................8
About String-type Parameters ..................................................................................................................................8
4
1 • Operator Interface Model 3101RC Admin Reference Guide
IntroductionAccess to the Operations System (OS) /Network Element (NE) system is protected by a logon security system. You can log on to the NE with the user name and password. After three failed logon attempts, the system refuses further attempts. After you log on, the system monitors the interface for periods of inactivity. If the interface is inactive for too long, you are automatically logged off. All the NEs have the same initial user name (admin) and password (admin). You should change the password as soon as possible, because the initial pass-word is known to anyone who reads this manual. You can also change the user name or add additional user names. Use the “account add” command to enter a new user identification, password and authorization level. The system can handle one local logon session and at least four remote/OS sessions.
Connect Interface
Authorization Level
Table 1. Connect interface
Interface Parameter
Console Baud rate: 9600, Data bit:8, Parity: None, Stop bit :1Telnet Port 23SSH Port 22 (In Windows, you can run terminal emulator such as PuTTY)
Table 2. Authorization Level
Level Description
Super user Superuser can run all commands.Engineer Engineer can run all commands except the commands for creat-
ing/modifying/deleting accountGuest (default) Guest can run most commands except the commands that have
creating/modifying/deleting purpose.
5 Introduction
Model 3101RC Admin Reference Guide 1 • Operator Interface
Screen Description
Figure 1. Screen Description
Execution ModesThe CLI contains several execution modes. Users will see a different set of commands under different execu-tion modes. Table 3 lists all the execution modes and their purposes. When users enter a certain execution mode, the corresponding mode prompt will be displayed automatically on the screen. The mode prompts of all the execution modes are also listed in Table 3.
Table 3. List of Execution Modes
Execute Mode Description Prompt Symbol
Initialize Without login prompt or already authenticated >Enable Management capable %
Configure Configuration capable (conf)#Interface Interface configure capable (intf-conf)#
Ethernet Interface Ethernet Interface configure capable (ethernet-intf-conf)#ATM Bridge ATM Bridge configuration capable (bridge-atm-conf)#
ATM Description ATm Description configuration capable (atm-desc-conf)#ADSL config ADSL line configuration capable (adsl-intf-conf)#
Bridge Bridge configuration capable (acl-conf)#Access List ACL configuration capable (acl-conf)#
Service Profile User/Line service profile configuration capable (service-profile-conf)#Spectrum Profile User/Line spectrum profile configuration capable (spectrum-profile-conf)#
Alarm Profile User/Line alarm profile configuration capable (alarm-profile-conf)#TCA Profile User/Line TCA profile configuration capable (tca-profile-conf)#
IGMP ACL Profile IGMP ACL profile configuration capable (igmpacl-profile-conf)#Priority List Priority List configuration capable (prio-conf)#
Screen Description 6
1 • Operator Interface Model 3101RC Admin Reference Guide
Getting HelpThe user can get help in two ways. The firwat way is by using the help command. The user can also enter a question mark “?” at each position in the command. The displayed result depends on the execution mode and previous input.
Terminal Key FunctionsA list of all the terminal keys and their functions are shown in Table 4:
Table 4. List of Terminal Keys
Key Function
TAB Attempt to perform completion on the text before pointTAB TAB Display the next keyword of this command? Display help of commandENTER Execute inputDEL or BACKSPACE Delete the character to the left of the cursorUP Arrow History of last input lineDOWN Arrow History of previous input lineCTRL-d Delete the character at point. If point is at the beginning of the line,there
are no characters in the line, and the last character typed was not bound to delete-char, then return EOF.
CTRL-a Move to the start of the lineCTRL-e Move to the end of the lineCTRL-f Move Forward one characterCTRL-b Move Back one characterCTRL-c Force to interruptCTRL-k Kill the text from the current cursor to the endCTRL-p Move ‘back’ through the history list, fetching the previouscommand.CTRL-n Move ‘forward’ through the history list, fetching the next command.CTRL-r Search backward starting at the current line and moving ‘up’ through the
history as necessary. This is an incremental search.CTRL-t Drag the character before the cursor forward over the character at the cur-
sor, moving the cursor forward as well. If the insertion point is at the end of the line, this transposes the last two characters of the line. Negative arguments have no effect.
CTRL-u Kill backward from the cursor to the beginning of the current line.CTRL-w Kill the word behind point, using white space as a word boundary. The
killed text is saved on the kill-ring.CTRL-y Yank the top of the kill ring into the buffer at point.CTRL-s Terminal will not response to what the operator key inCTRL-q Back to normal mode from terminal not responding modeCTRL-z Exit current execution mode
7 Getting Help
Model 3101RC Admin Reference Guide 1 • Operator Interface
Notation ConventionsThe notation conventions for the parameter syntax of each CLI command are:
• Parameters enclosed in [ ] are optional.
• Parameter values are separated by a vertical bar “|” only when one of the specified values can be used.
• Parameter values are enclosed in { } when you must use one of the values specified.
About String-type ParametersSome commands have string type parameters. When you type in the values of these parameters, you must be careful not to use the keyword that is actually a part of some command. For example, ‘account add default’ will cause a syntax mistake, since default is the keyword of the command ‘igmp default’ and some other com-mands. Therefore, it is recommended to add “ ” when you have to use the command keyword as the parameter value. In this way, the keyword will be regarded as a common string. For example, account add “default”.
Notation Conventions 8
1 • Operator Interface Model 3101RC Admin Reference Guide
9 About String-type Parameters
Chapter 2 Global Commands
Chapter contentsGlobal Commands ................................................................................................................................................11
bye ..................................................................................................................................................................11
disable .............................................................................................................................................................11exit ..................................................................................................................................................................11
help .................................................................................................................................................................11
list opmode .....................................................................................................................................................11system name ....................................................................................................................................................12
system restart ..................................................................................................................................................12
10
Model 3101RC Admin Reference Guide 2 • Global Commands
Global CommandsThe Global commands can be used in all execution modes.
bye
disable
exit
help
list opmode
Description: ExitSyntax: byeParameter: None
Description: Go to Disable execution mode from logoff modeSyntax: disableParameter: None
Description: Go to previous execution modeSyntax: exitParameter: None
Description: Display helpSyntax: helpParameter: None
Description: List all the ADSL modes of operation.Syntax: list opmodeParameter: None
Global Commands 11
Model 3101RC Admin Reference Guide 2 • Global Commands
system name
system restart
Description: Set system nameSyntax: system name <name>Parameter: Name Description
<name> System name. (max 32 characters)
Valid values: System name must not be all digital numbers.
Default value: u711FFC
Type: Mandatory
Description: Restart the systemSyntax: system restartParameter: None
Global Commands 12
Chapter 3 Initialize Mode Commands
Chapter contentsInitialize Mode Commands ...................................................................................................................................14
enable .............................................................................................................................................................14
show license ....................................................................................................................................................14show time .......................................................................................................................................................14
show uptime ...................................................................................................................................................14
show version ...................................................................................................................................................14
13
3 • Initialize Mode Commands Model 3101RC Admin Reference Guide
Initialize Mode Commands
enable
show license
show time
show uptime
show version
Description: Go to Enable execution mode from disable modeSyntax: enableParameter: None
Description: Display GNU software licenseSyntax: show licenseParameter: None
Description: Display current timeSyntax: show timeParameter: None
Description: Display System up time and CPU loadingSyntax: show uptimeParameter: None
Description: Display CLI software versionSyntax: show versionParameter: None
14 Initialize Mode Commands
Chapter 4 Enable Mode Commands
Chapter contentsEnable Mode Commands ......................................................................................................................................18
configure .........................................................................................................................................................18
ping ................................................................................................................................................................18show access-list bcrate .....................................................................................................................................18
show access-list dstip .......................................................................................................................................19
show access-list ipprotocol ..............................................................................................................................19show access-list l4dstport ................................................................................................................................19
show access-list mcfldrate ................................................................................................................................20
show access-list srcip .......................................................................................................................................20show access-list srcmac ....................................................................................................................................20
show access-list outportrate .............................................................................................................................20
show access-list outportrate xdsl ......................................................................................................................21show access-list outportrate gigabit ..................................................................................................................21
show access-list policer ....................................................................................................................................21
show account ..................................................................................................................................................21show aging ......................................................................................................................................................22
show alarm current .........................................................................................................................................22
show alarm event ............................................................................................................................................22show alarm history ..........................................................................................................................................22
show atmdesc ..................................................................................................................................................22
show atm-loopback .........................................................................................................................................22show cli-config ................................................................................................................................................23
show cpu .........................................................................................................................................................23
show dsl-line-identify ......................................................................................................................................23show fdb .........................................................................................................................................................23
show fdbstatic .................................................................................................................................................23
show firmware .................................................................................................................................................24show help ........................................................................................................................................................24
show http ........................................................................................................................................................24
show igmp ......................................................................................................................................................24show igmp group ............................................................................................................................................24
show igmp rtport ............................................................................................................................................25
show igmp-acl bind .........................................................................................................................................25show interface .................................................................................................................................................25
show interface xdsl {all | <port>} adsl carrier fe ds snr ......................................................................................25
show interface xdsl {all | <port>} adsl carrier fe ds qln ......................................................................................26show interface xdsl {all | <port>} adsl carrier fe ds hlin ....................................................................................26
show interface xdsl {all | <port>} adsl carrier fe ds hlog ....................................................................................26
show interface xdsl {all | <port>} adsl carrier fe us load ....................................................................................27
15
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} adsl carrier fe us gain ....................................................................................27
show interface xdsl {all | <port>} adsl carrier fe us tss .......................................................................................27
show interface xdsl {all | <port>} adsl carrier ne us snr .....................................................................................28show interface xdsl {all | <port>} adsl carrier ne us qln .....................................................................................28
show interface xdsl {all | <port>} adsl carrier ne us hlin ...................................................................................28
show interface xdsl {all | <port>} adsl carrier ne us hlog ...................................................................................29show interface xdsl {all | <port>} adsl carrier ne ds load ...................................................................................29
show interface xdsl {all | <port>} adsl carrier ne ds gain ...................................................................................29
show interface xdsl {all | <port>} adsl carrier ne ds tss ......................................................................................30show interface xdsl {all | <port>} adsl channel .................................................................................................30
show interface xdsl {all | <port>} adsl failure ....................................................................................................30
show interface xdsl {all | <port>} adsl line ........................................................................................................31
show interface xdsl {all | <port>} adsl line config .............................................................................................31show interface xdsl {all | <port>} adsl line delt-test ..........................................................................................31
show interface xdsl {all | <port>} adsl line information ....................................................................................32
show interface xdsl {all | <port>} adsl inventory ...............................................................................................32show interface xdsl {all | <port>} adsl operational ............................................................................................32
show interface xdsl {all | <port>} bridge ...........................................................................................................33
show interface xdsl {all | <port>} cellcount ......................................................................................................33show interface xdsl {all | <port>} counter .........................................................................................................33
show interface xdsl {all | <port>} vlan ..............................................................................................................34
show interface xdsl {all | <port>} vc .................................................................................................................34show interface bridge ......................................................................................................................................34
show interface counter ....................................................................................................................................34
show interface gigabit [<port>] bridge .............................................................................................................35show interface gigabit [<port>] counter ...........................................................................................................35
show interface gigabit [<port>] stp ..................................................................................................................35
show interface gigabit [<port>] vlan ................................................................................................................36show interface gigabit la bridge .......................................................................................................................36
show interface gigabit la counter .....................................................................................................................36
show interface gigabit la lacp ...........................................................................................................................36show interface gigabit la vlan ...........................................................................................................................36
show lacp ........................................................................................................................................................37
show management all ......................................................................................................................................37show management dhcp ..................................................................................................................................37
show management gbe ....................................................................................................................................37
show management mtu ...................................................................................................................................37show management mgmt ................................................................................................................................37
show pm <port> adsl day ................................................................................................................................38
show pm <port> adsl interval ..........................................................................................................................38show priority-list ds .........................................................................................................................................39
show priority-list dstip ....................................................................................................................................39
show priority-list dstmac .................................................................................................................................39show priority-list srcip .....................................................................................................................................40
16
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show priority-list srcmac .................................................................................................................................40
show priority-list tos .......................................................................................................................................40
show priority-list vlanid ..................................................................................................................................41show priority-regen .........................................................................................................................................41
show profile alarm all ......................................................................................................................................41
show profile igmp-acl ......................................................................................................................................41show profile service adsl ..................................................................................................................................42
show profile spectrum adsl ..............................................................................................................................42
show profile tca adsl ........................................................................................................................................42show rmon alarm ............................................................................................................................................43
show rmon ether_history ................................................................................................................................43
show rmon event .............................................................................................................................................43
show rmon history ..........................................................................................................................................44show rmon log ................................................................................................................................................44
show rmon statistic .........................................................................................................................................44
show route ......................................................................................................................................................44show runningcfg .............................................................................................................................................45
show snmp ......................................................................................................................................................45
show sntp ........................................................................................................................................................45show stp ..........................................................................................................................................................45
show syslog server ...........................................................................................................................................45
show system ....................................................................................................................................................45show temperature ............................................................................................................................................46
show time .......................................................................................................................................................46
show uptime ...................................................................................................................................................46show version ...................................................................................................................................................46
show version detail ..........................................................................................................................................46
show vlan ........................................................................................................................................................47telnet ...............................................................................................................................................................47
traceroute ........................................................................................................................................................47
traceroute no_icmp .........................................................................................................................................48
17
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
Enable Mode CommandsThe commands in this section can be executed only in the Enable execution mode.
Note Enable mode commands are executed with the % prompt symbol.
configure
ping
show access-list bcrate
Description: Go to Configure execution mode from Enable mode.Syntax: configureParameter: None
Description: ICMP echo and reply from hostname address or IP address. if no reply for a long time, you can press Ctrl + c to interrupt ping.
Syntax: ping {ipv4 address}ping {ipv4 address} count <count>ping {ipv4 address} size <size>ping {ipv4 address} count <count> size <size>
Parameter: Name Description
ipv4 address IPv4 address
Valid values: xxx.xxx.xxx.xxx (xxx: 0~255)
Default value: -count The number of PING packets sent
Default value: -size Packet size
Default value: -
Description: Display all broadcast rate limiting listSyntax: show access-list bcrateParameter: None
Enable Mode Commands 18
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show access-list dstip
show access-list ipprotocol
show access-list l4dstport
Description: Display all dest IP deny access list or by index.Syntax: show access-list dstip [<index>]Parameter: Name Description
<index> Destination IP deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Description: Display all IP protocol deny access list or by indexSyntax: show access-list ipprotocol [<index>]Parameter: Name Description
<index> IP Protocol deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Description: Display all L4 dest port deny access list or by indexSyntax: show access-list l4dstport [<index>]Parameter: Name Description
<index> L4 destination port deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Enable Mode Commands 19
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show access-list mcfldrate
show access-list srcip
show access-list srcmac
show access-list outportrate
Description: Display all flooding rate limiting list or by VLAN IDSyntax: show access-list mcfldrate [vlan <VLAN ID>]Parameter: Name Description
VLAN ID VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: Display all source IP deny access list or by indexSyntax: show access-list srcip [<index>]Parameter: Name Description
<index> Source IP deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Description: Display all source mac address deny access list or by indexSyntax: show access-list srcmac [<index>]Parameter: Name Description
<index> Source MAC deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Description: Display out port data rate.Syntax: show access-list outportrateParameter: None
Enable Mode Commands 20
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show access-list outportrate xdsl
show access-list outportrate gigabit
show access-list policer
show account
Description: Display xdsl port data rateSyntax: show access-list outportrate xdsl <port> / <pvc>Parameter: Name Description
<port> XDSL port number
Valid values: 1 ~ 48
Default value: -
Type: Optional<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatory
Description: Display Gbe port data rate (for port 1, 2 or link aggregation)Syntax: show access-list outportrate gigabit {<port> | la}Parameter: Name Description
<port> GBE port number
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Display policer settingSyntax: show access-list policerParameter: None
Description: Display system account list / detail informationSyntax: show account [detail]Parameter: None
Enable Mode Commands 21
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show aging
show alarm current
show alarm event
show alarm history
show atmdesc
show atm-loopback
Description: Display bridge aging timeSyntax: show agingParameter: None
Description: Display current alarm listSyntax: show alarm currentParameter: None
Description: Display event listSyntax: show alarm eventParameter: None
Description: Display alarm history listSyntax: show alarm historyParameter: None
Description: Display ATM descriptorSyntax: show atmdescParameter: None
Description: Display ATM loopback status (by port)Syntax: show atm-loopback [<port>]Parameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Optional
Enable Mode Commands 22
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show cli-config
show cpu
show dsl-line-identify
show fdb
show fdbstatic
Description: Display current setting for CLI configuration (timeout value, session value)Syntax: show cli-configParameter: None
Description: Display CPU informationSyntax: show cpuParameter: None
Description: Display DSL line identify informationSyntax: show dsl-line-identifyParameter: None
Description: Display all MAC learning table or by VLAN IDSyntax: show fdb [vlan <VLAN ID>]Parameter: Name Description
<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: Display all static MAC forwarding table or by indexSyntax: show fdbstatic [<index>]Parameter: Name Description
<index> Static MAC forwarding table number
Valid values: 1 ~ 512
Default value: -
Type: Optional
Enable Mode Commands 23
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show firmware
show help
show http
show igmp
show igmp group
Description: Display firmware update status or partition informationSyntax: show firmware {status | partition}Parameter: None
Description: Display HelpSyntax: show helpParameter: None
Description: Display HTTP Web portSyntax: show httpParameter: None
Description: Display IGMP informationSyntax: show igmpParameter: None
Description: Display IGMP VLAN group listSyntax: show igmp group list
show igmp group ip <ipv4 address> vlan <VLAN IDshow igmp group ip <ipv4 address> vlan <VLAN ID> src listshow igmp group ip <ipv4 address> vlan <VLAN ID> src <ipv4 address>
Parameter: Name Description
ipv4 address IGMP group address
Valid values: 224.0.0.0 ~ 239.255.255.255The range of addresses from 224.0.0.0 to 224.0.0.255 is reserved for the use of routing protocols and other low-level topology discovery or maintenance protocols.
Default value: -
Type: Mandatory
Enable Mode Commands 24
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show igmp rtport
show igmp-acl bind
show interface
show interface xdsl {all | <port>} adsl carrier fe ds snr
Description: Display all IGMP router port list or by VLAN IDSyntax: show igmp rtport [vlan <VLAN ID>]Parameter: Name Description
VLAN ID VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: Display IGMP ACL binding listSyntax: show igmp-acl bindParameter: None
Description: Display all interfacesSyntax: show interfaceParameter: None
Description: Display carrier information of far-end snr downstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier fe ds snrParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 25
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} adsl carrier fe ds qln
show interface xdsl {all | <port>} adsl carrier fe ds hlin
show interface xdsl {all | <port>} adsl carrier fe ds hlog
Description: Display carrier information of far-end qln downstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier fe ds qlnParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display carrier information of far-end hlin downstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier fe ds hlinParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display carrier information of far-end hlog downstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier fe ds hlogParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 26
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} adsl carrier fe us load
show interface xdsl {all | <port>} adsl carrier fe us gain
show interface xdsl {all | <port>} adsl carrier fe us tss
Description: Display carrier information of far-end load upstream by Bridge portSyntax: show interface xdsl {all | <port>} adsl carrier fe us loadParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display carrier information of far-end gain upstream by Bridge portSyntax: show interface xdsl {all | <port>} adsl carrier fe us gainParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display carrier information of far-end tss upstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier fe us tssParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 27
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} adsl carrier ne us snr
show interface xdsl {all | <port>} adsl carrier ne us qln
show interface xdsl {all | <port>} adsl carrier ne us hlin
Description: Display carrier information of near-end snr upstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier ne us snrParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display carrier information of near-end qln upstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier ne us qlnParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display carrier information of near-end hlin upstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier ne us hlinParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 28
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} adsl carrier ne us hlog
show interface xdsl {all | <port>} adsl carrier ne ds load
show interface xdsl {all | <port>} adsl carrier ne ds gain
Description: Display carrier information of near-end hlog upstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier ne us hlogParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display carrier information of near-end load downstream by Bridge portSyntax: show interface xdsl {all | <port>} adsl carrier ne ds loadParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display carrier information of near-end gain downstream by Bridge portSyntax: show interface xdsl {all | <port>} adsl carrier ne ds gainParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 29
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} adsl carrier ne ds tss
show interface xdsl {all | <port>} adsl channel
show interface xdsl {all | <port>} adsl failure
Description: Display carrier information of near-end tss downstream by Bridge port (the xdsl port must be in diagnostic mode and the test is completed)
Syntax: show interface xdsl {all | <port>} adsl carrier ne ds tssParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display xDSL line channel information by Bridge portSyntax: show interface xdsl {all | <port>} adsl channelParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display xDSL failure by Bridge portSyntax: show interface xdsl {all | <port>} adsl failureParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 30
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} adsl line
show interface xdsl {all | <port>} adsl line config
show interface xdsl {all | <port>} adsl line delt-test
Description: Display xDSL line status by Bridge portSyntax: show interface xdsl {all | <port>} adsl lineParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display xDSL line configuration information by Bridge portSyntax: show interface xdsl {all | <port>} adsl line configParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display xDSL line DELT test information by Bridge portSyntax: show interface xdsl {all | <port>} adsl line delt-testParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 31
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} adsl line information
show interface xdsl {all | <port>} adsl inventory
show interface xdsl {all | <port>} adsl operational
Description: Display xDSL line information by Bridge portSyntax: show interface xdsl {all | <port>} adsl line informationParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display xDSL inventory by Bridge portSyntax: show interface xdsl {all | <port>} adsl inventoryParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display xDSL far-end/near-end operational information by Bridge portSyntax: show interface xdsl {all | <port>} adsl operational {fe | ne}Parameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 32
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} bridge
show interface xdsl {all | <port>} cellcount
show interface xdsl {all | <port>} counter
Description: Display Bridge information by Bridge portSyntax: show interface xdsl {all | <port>} bridgeParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display ATM cell counter by Bridge portSyntax: show interface xdsl {all | <port>} cellcountParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display Ethernet packet counter by Bridge portSyntax: show interface xdsl {all | <port>} counterParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 33
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface xdsl {all | <port>} vlan
show interface xdsl {all | <port>} vc
show interface bridge
show interface counter
Description: Display VLAN information by Bridge portSyntax: show interface xdsl {all | <port>} vlanParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display VC information by Bridge portSyntax: show interface xdsl {all | <port>} vcParameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Display All interface Bridge informationSyntax: show interface bridgeParameter: None
Description: Display All interface Ethernet packet counterSyntax: show interface counterParameter: None
Enable Mode Commands 34
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface gigabit [<port>] bridge
show interface gigabit [<port>] counter
show interface gigabit [<port>] stp
Description: Display Bridge information of all Gigabit Ethernet interfaces or by Gigabit Ether-net port
Syntax: interface gigabit [<port>] bridgeParameter: Name Description
port Gigabit Ethernet port number
Valid values: 1 ~ 2
Default value: -
Type: Optional
Description: Display Gigabit Ethernet counter of all Gigabit Ethernet interfaces or by Gigabit Ethernet port
Syntax: show interface gigabit [<port>] counterParameter: Name Description
port Gigabit Ethernet port number
Valid values: 1 ~ 2
Default value: -
Type: Optional
Description: Display Port Spanning Tree status of all Gigabit Ethernet interfaces or by Gigabit Ethernet port
Syntax: show interface gigabit [<port>] stpParameter: Name Description
port Gigabit Ethernet port number
Valid values: 1 ~ 2
Default value: -
Type: Optional
Enable Mode Commands 35
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show interface gigabit [<port>] vlan
show interface gigabit la bridge
show interface gigabit la counter
show interface gigabit la lacp
show interface gigabit la vlan
Description: Display VLAN information of all Gigabit Ethernet interface or by Gigabit Ether-net port
Syntax: show interface gigabit [<port>] vlanParameter: Name Description
port Gigabit Ethernet port number
Valid values: 1 ~ 2
Default value: -
Type: Optional
Description: Display link aggregation gigabit Ethernet bridge informationSyntax: show interface gigabit la bridgeParameter: None
Description: Display link aggregation gigabit Ethernet counterSyntax: show interface gigabit la counterParameter: None
Description: Display gigabit Ethernet aggregator port informationSyntax: show interface gigabit la lacpParameter: None
Description: Display link aggregation Gigabit Ethernet vlan informationSyntax: show interface gigabit la vlanParameter: None
Enable Mode Commands 36
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show lacp
show management all
show management dhcp
show management gbe
show management mtu
show management mgmt
Description: Display LACP informationSyntax: show lacpParameter: None
Description: Display all system management port ip settingSyntax: show management allParameter: None
Description: Display DHCP client settingSyntax: show management dhcpParameter: None
Description: Display GBE management port ip settingSyntax: show management gbeParameter: None
Description: Display all system management port Maximum Transmission Unit (MTU) size settingSyntax: show management mtuParameter: None
Description: Display MGMT management port ip settingSyntax: show management mgmtParameter: None
Enable Mode Commands 37
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show pm <port> adsl day
show pm <port> adsl interval
Description: Display performance monitoring data for previous 1 day or current daySyntax: show pm <port> adsl day {<number> | current}Parameter: Name Description
port Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatorynumber Day number
Valid values: 1 ~ 1
Default value: -
Type: Mandatory
Description: Display performance monitoring data for previous 1~96 intervals or current inter-val
Syntax: show pm <port> adsl interval {<number> | current}Parameter: Name Description
port Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatorynumber Interval number
Valid values: 1 ~ 96
Default value: -
Type: Mandatory
Enable Mode Commands 38
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show priority-list ds
show priority-list dstip
show priority-list dstmac
Description: Display differentiated services priority listSyntax: show priority-list ds [<number>]Parameter: Name Description
number Differentiate services priority list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Description: Display destination IP address priority listSyntax: show priority-list dstip [<number>]Parameter: Name Description
number Destination IP address priority list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Description: Display destination MAC address priority listSyntax: show priority-list dstmac [<number>]Parameter: Name Description
number Destination MAC address priority list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Enable Mode Commands 39
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show priority-list srcip
show priority-list srcmac
show priority-list tos
Description: Display source IP address priority listSyntax: show priority-list srcip [<number>]Parameter: Name Description
number Source IP address priority list number
Valid values: 1 ~ 256
Default value: -
Type: Optional
Description: Display source MAC address priority listSyntax: show priority-list srcmac [<number>]Parameter: Name Description
number Source MAC address priority list number.
Valid values: 1 ~ 256
Default value: -
Type: Optional
Description: Display ToS (IP Precedence) priority listSyntax: show priority-list tos [<number>]Parameter: Name Description
number ToS (IP Precedence) priority list number.
Valid values: 1 ~ 256
Default value: -
Type: Mandatory
Enable Mode Commands 40
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show priority-list vlanid
show priority-regen
show profile alarm all
show profile igmp-acl
Description: Display VLAN ID priority listSyntax: show priority-list vlanid [<number>]Parameter: Name Description
number VLAN ID priority list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory
Description: Display VLAN priority tag filterSyntax: show priority-regenParameter: None
Description: Display alarm profileSyntax: sshow profile alarm allParameter: None
Description: Display IGMP ACL profileSyntax: show profile igmp-acl <number>Parameter: Name Description
<number> Profile index
Valid values: 1 ~ 15
Default value: -
Type: Mandatory
Enable Mode Commands 41
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show profile service adsl
show profile spectrum adsl
show profile tca adsl
Description: Display ADSL service profileSyntax: show profile service adsl {<number> | all}Parameter: Name Description
<number> Profile index
Valid values: 1 ~ 120
Default value: -
Type: Optional
Description: Display ADSL service profileSyntax: show profile service adsl {<number> | all}Parameter: Name Description
<number> Profile index
Valid values: 1 ~ 120
Default value: -
Type: Optional
Description: Display threshold crossing alert profileSyntax: show profile tca adsl {<port> | all}Parameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Enable Mode Commands 42
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show rmon alarm
show rmon ether_history
show rmon event
Description: Display RMON alarm informationSyntax: show rmon alarm {all | <number>}Parameter: Name Description
number RMON alarm entry index
Valid values: 1 ~ 64
Default value: -
Type: Mandatory
Description: Display RMON Ether history informationSyntax: show rmon ether_history <number>Parameter: Name Description
number RMON index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory
Description: Display RMON event informationSyntax: show rmon event {all | <number>}Parameter: Name Description
number RMON event entry index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory
Enable Mode Commands 43
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show rmon history
show rmon log
show rmon statistic
show route
Description: Display RMON history control informationSyntax: show rmon history {all | <number>}Parameter: Name Description
number RMON history control entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory
Description: Display RMON logSyntax: show rmon logParameter: None
Description: Display RMON statistic informationSyntax: show rmon statistic {all | <number>}Parameter: Name Description
number RMON statistic entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory
Description: Display GBE routing table and default gatewaySyntax: show routeParameter: None
Enable Mode Commands 44
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show runningcfgThis command can only be run by Superuser.
show snmp
show sntp
show stp
show syslog server
show system
Description: Display running configSyntax: show runningcfgParameter: None
Description: Display SNMP community/notify/target settingSyntax: show snmp {community | notify | target}Parameter: None
Description: Display SNTP settingSyntax: show sntpParameter: None
Description: Display spanning treeSyntax: show stpParameter: None
Description: Display IP address of the syslog serverSyntax: show syslog serverParameter: None
Description: Display system information, system inventory, or system nameSyntax: show system {information | inventory | name}Parameter: None
Enable Mode Commands 45
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show temperature
show time
show uptime
show version
show version detail
Description: Display system temperatureSyntax: show temperatureParameter: None
Description: Display current timeSyntax: show timeParameter: None
Description: Display System up time and CPU loadingSyntax: show uptimeParameter: None
Description: Display CLI software versionSyntax: show versionParameter: None
Description: Display CLI software version and system informationSyntax: show version detailParameter: None
Enable Mode Commands 46
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
show vlan
telnet
traceroute
Description: Display bridge port member setSyntax: show vlan [<VLAN ID>]Parameter: Name Description
<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Optional
Description: Telnet to a destinationSyntax: telnet <target address>Parameter: Name Description
target address IPV4 address or hostname
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
Description: Trace route (and use ICMP ECHO instead of UDP datagrams)Syntax: traceroute <target address>Parameter: Name Description
target address IPV4 address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
Enable Mode Commands 47
Model 3101RC Admin Reference Guide 4 • Enable Mode Commands
traceroute no_icmp
Description: Trace route and not use ICMP ECHOSyntax: traceroute <target address> no_icmpParameter: Name Description
target address IPV4 address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
Enable Mode Commands 48
Chapter 5 Configure Mode Commands
Chapter contentsConfigure Mode Commands.................................................................................................................................52
access-list ........................................................................................................................................................52
account add ....................................................................................................................................................52account delete .................................................................................................................................................53
account modify ...............................................................................................................................................53
acl service ........................................................................................................................................................54aging ...............................................................................................................................................................54
alarm event clear .............................................................................................................................................54
alarm history clear ...........................................................................................................................................54atmdesc ...........................................................................................................................................................54
atm-loopback ..................................................................................................................................................56
cli-config session .............................................................................................................................................56cli-config timeout ............................................................................................................................................57
dsl-line-identify dhcp ......................................................................................................................................57
dsl-line-identify dhcp option82 circuit ............................................................................................................57dsl-line-identify dhcp option82 dslam-name ...................................................................................................57
dsl-line-identify dhcp option82 sub ................................................................................................................57
dsl-line-identify pppoe srv-name .....................................................................................................................58fdbstatic ..........................................................................................................................................................58
fdbstatic disable ...............................................................................................................................................59
fdbstatic list .....................................................................................................................................................59firmware login .................................................................................................................................................60
firmware get ....................................................................................................................................................60
firmware write .................................................................................................................................................60firmware partition ...........................................................................................................................................61
http port .........................................................................................................................................................61
igmp acl ..........................................................................................................................................................61igmp default ....................................................................................................................................................61
igmp disable ....................................................................................................................................................61
igmp proxy ......................................................................................................................................................62igmp snooping ................................................................................................................................................62
igmp rtport gigabit ..........................................................................................................................................62
igmp rtport list ................................................................................................................................................62igmp timeout ..................................................................................................................................................63
igmp version ...................................................................................................................................................63
interface gigabit ...............................................................................................................................................63interface gigabit la ...........................................................................................................................................63
interface xdsl ...................................................................................................................................................64
management dhcp ...........................................................................................................................................64
49
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
management dhcp timeout .............................................................................................................................64
management dhcp leasetime ............................................................................................................................64
management gbe .............................................................................................................................................65management mgmt .........................................................................................................................................65
pm clear ..........................................................................................................................................................66
priority-list ......................................................................................................................................................66profile alarm ....................................................................................................................................................66
profile igmp-acl ...............................................................................................................................................66
profile service adsl ...........................................................................................................................................67profile spectrum ..............................................................................................................................................67
profile tca xdsl .................................................................................................................................................67
remotecfg login ...............................................................................................................................................68
restore-factory .................................................................................................................................................68rmon alarm <index> alarm_interval ................................................................................................................69
rmon alarm <index> delete ..............................................................................................................................69
rmon alarm <index> falling_eventindex ..........................................................................................................70rmon alarm <index> falling_threshold ............................................................................................................70
rmon alarm <index> owner .............................................................................................................................71
rmon alarm <index> sample_type ...................................................................................................................71rmon alarm <index> startup_alarm .................................................................................................................71
rmon alarm <index> variable ...........................................................................................................................72
rmon event <index> community .....................................................................................................................73rmon event <index> delete ..............................................................................................................................73
rmon event <index> description ......................................................................................................................74
rmon event <index> owner .............................................................................................................................74rmon event <index> type ................................................................................................................................75
rmon history <index> buckets_requested ........................................................................................................75
rmon history <index> delete ............................................................................................................................75rmon history <index> ifc .................................................................................................................................76
rmon history <index> interval .........................................................................................................................76
rmon history <index> owner ...........................................................................................................................77rmon statistic <index> delete ...........................................................................................................................77
rmon statistic <index> ifc ................................................................................................................................78
rmon statistic <index> owner ..........................................................................................................................78route ...............................................................................................................................................................79
route default ...................................................................................................................................................79
route delete .....................................................................................................................................................79runningcfg active partition ..............................................................................................................................80
runningcfg load partition ................................................................................................................................80
runningcfg login .............................................................................................................................................80runningcfg write partition ...............................................................................................................................81
snmp community ............................................................................................................................................81
snmp notify ....................................................................................................................................................82snmp target <name> address ...........................................................................................................................82
50
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
snmp target <name> delete .............................................................................................................................83
snmp target <name> tag-list ............................................................................................................................83
sntp polling interval ........................................................................................................................................83sntp server address ...........................................................................................................................................84
stp ...................................................................................................................................................................84
stp enable ........................................................................................................................................................84stp disable .......................................................................................................................................................84
stp forward delay .............................................................................................................................................84
stp hello time ..................................................................................................................................................85stp max-age .....................................................................................................................................................85
stp priority ......................................................................................................................................................85
stp version .......................................................................................................................................................85
syslog server ....................................................................................................................................................86trunk-mode .....................................................................................................................................................86
temperature threshold .....................................................................................................................................86
temperature shelf time .....................................................................................................................................87time set date ....................................................................................................................................................87
time set time ...................................................................................................................................................88
time set timezone ............................................................................................................................................89
51
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
Configure Mode CommandsThe commands in this section can be executed only in the Configure execution mode.
Note Configure mode commands are executed with the (conf)# prompt.
access-list
account add
Description: Go to access-list execution mode from Configure mode.Syntax: access-listParameter: None
Description: Add new account.Syntax: account add <name>
account add <name> password <password> comment <comment> account add <name> password <password> level <level> [comment <comment>] account add <name> password <password> password-expiration <day number>
Parameter: Name Description
<name> ID name (max 31 characters).
Only 0-9, a-z, A-Z, and symbol “_-.” are accepted for account name. For example, abc_12_XYZ-10.1 is a valid user name. Note that the UMAP 2110 does not accept user names beginning with a digital number. For example, 123abc or 123456 are not a valid name.
Default value: -
Type: Mandatory<password> Input password (max 31 characters)
Default value: space char
Type: Optional<level> Set access level
Valid values: superuser, engineer, guest
Default value: guest
Type: Optional<comment> Set comment (max 31 characters)
Default value: space char
Type: Optional
52 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
account delete
account modify
<day number> Set password expiration days (0:disable)
Default value: -
Type: Optional
Description: Delete accountSyntax: account delete <name>Parameter: Name Description
<name> ID name (max 31 characters).
Default value: -
Type: Mandatory
Description: Modify account.Syntax: account modify <name> comment <comment>
account modify <name> password <password> [{ level <level> [comment <com-ment>] | comment <comment> | password-expiration <day number> }] account modify <name> level <level> [comment <comment> account modify <name> password-expiration <day number>
Parameter: Name Description
<name> ID name (max 31 characters).
Default value: -
Type: Mandatory<password> Input password (max 31 characters)
Default value: space char
Type: Optional<level> Set access level
Valid values: superuser, engineer, guest
Default value: guest
Type: Optional<comment> Set comment (max 31 characters)
Default value: space char
Type: Optional
Configure Mode Commands 53
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
acl service
aging
alarm event clear
alarm history clear
atmdesc
day number Set password expiration days (0:disable)
Default value: -
Type: Optional
Description: Set Access Control List service on/off (when ACL Service is set to OFF, none of the Access Control functions including Filtering, VLAN Priority Remark and Rate Limit will be supported)
Syntax: acl service {on | off}Parameter: None
Description: Bridge aging timeSyntax: aging <number>Parameter: Name Description
number Aging time (sec)
Valid values: (10-1000000) sec.
Default value: 300
Type: Mandatory
Description: Clear alarm event logSyntax: alarm event clearParameter: None
Description: Clear alarm historySyntax: alarm history clearParameter: None
Description: Go to ATM-description execution mode from Configure modeSyntax: atmdesc
54 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
Parameter: None
Configure Mode Commands 55
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
atm-loopback
cli-config session
Description: ATM loopback testingSyntax: atm-loopback {enable | disable | <port>/<pvc> type <type>}Parameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 8
Default value: -
Type: Mandatory<type> ATM loopback type
Valid values: f5-e2e, f5-segment
Default value: -
Type: Mandatory
Description: Set CLI max number of connection sessionsSyntax: cli-config session <number>Parameter: Name Description
<number> Set CLI max number of connection sessions
Valid values: 1 ~ 10
Default value: 5
Type: Mandatory
56 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
cli-config timeout
dsl-line-identify dhcp
dsl-line-identify dhcp option82 circuit
dsl-line-identify dhcp option82 dslam-name
dsl-line-identify dhcp option82 sub
Description: Set CLI configuration timeout valueSyntax: cli-config timeout <number>Parameter: Name Description
<number> Set CLI connection timeout value
Valid values: 180 ~ 3600 (sec)
Default value: -
Type: Mandatory
Description: Set DHCP Relay Option82 enable/disableSyntax: dsl-line-identify dhcp {enable | disable}Parameter: None
Description: Set DHCP Option82 Circuit ID type (default type / Customer type)Syntax: dsl-line-identify dhcp option82 circuit {default | customer}Parameter: None
Description: Set DSLAM nameSyntax: dsl-line-identify dhcp option82 dslam-name <string>Parameter: Name Description
<string> Set DSLAM name (max length 15)
Default value: -
Type: Mandatory
Description: Set DHCP Option82 sub mode (send Circuit ID/send Remote ID/send Both)Syntax: dsl-line-identify dhcp option82 remote {default | line-id | line-descr | line-phone | customer}Parameter: None
Configure Mode Commands 57
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
dsl-line-identify pppoe srv-name
fdbstatic
Description: Set Service NameSyntax: dsl-line-identify pppoe srv-name <string>Parameter: Name Description
<string> Set Service name
Default value: -
Type: Mandatory
Description: Static MAC forwarding table settingSyntax: fdbstatic <number> xdsl <port>/<pvc> vlan <VLAN ID> mac <mac address> {deny | pass}
fdbstatic <number> gigabit {<port> | la} vlan <VLAN ID> mac <mac address> {deny | pass}Parameter: Name Description
<number> Static MAC forwarding table number
Valid values: 1 ~ 512
Default value: -
Type: Mandatory<port> Port number
Valid values: 1 ~ 48 for xDSL, 1 ~ 2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatory<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory<mac address> MAC address
Valid values: xx:xx:xx:xx:xx:xx (xx:00~ff)
Default value: -
Type: Mandatory
58 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
fdbstatic disable
fdbstatic list
Description: Disable specify static MAC forwarding entrySyntax: fdbstatic <number> disableParameter: Name Description
<number> Static MAC forwarding table number
Valid values: 1 ~ 512
Default value: -
Type: Mandatory
Description: Show static MAC forwarding table or specified static MAC forwarding entrySyntax: fdbstatic [<number>] listParameter: Name Description
<number> Static MAC forwarding table number
Valid values: 1 ~ 512
Default value: -
Type: Mandatory
Configure Mode Commands 59
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
firmware login
firmware get
firmware write
Description: Login FTP server that firmware image belongs toSyntax: firmware login <ipv4 address> usernameParameter: Name Description
<ipv4address> IPV4 address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory<name> User name (max 31 characters)
Default value: -
Type: Mandatory<password> Input password (max 31 characters)
Default value: -
Type: Mandatory
Description: Get firmware image from FTP serverSyntax: firmware get <filename>Parameter: Name Description
<filename> Path and File name (max 31 characters)
Default value: -
Type: Mandatory
Description: Write image to Flash ROMSyntax: firmware writeParameter: None
60 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
firmware partition
http port
igmp acl
igmp default
igmp disable
Description: Set booting partitionSyntax: firmware partition <number>Parameter: Name Description
<number> Partition number
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Set http server listening portSyntax: http port <port number>Parameter: Name Description
port number The port number
Valid values: Integer range 0-65535
Default value: 80
Type: Mandatory
Description: IGMP ACL control modeSyntax: igmp acl {enable | disable}Parameter: None
Description: IGMP set defaultSyntax: igmp [default]Parameter: None
Description: Disable snooping mode and proxy modeSyntax: igmp disableParameter: None
Configure Mode Commands 61
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
igmp proxy
igmp snooping
igmp rtport gigabit
igmp rtport list
Description: IGMP proxy snooping mode enableSyntax: igmp proxyParameter: None
Description: IGMP normal snooping mode enableSyntax: igmp snoopingParameter: None
Description: IGMP router port setting for GBESyntax: igmp rtport gigabit {<port> | la} vlan <VLAN ID> [disable]Parameter: Name Description
port Port number
Valid values: 1 ~ 2
Default value: -
Type: MandatoryVLAN ID VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: Show IGMP router port listSyntax: igmp rtport list [<VLAN ID>]Parameter: Name Description
<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
62 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
igmp timeout
igmp version
interface gigabit
interface gigabit la
Description: IGMP timeout setting (BC/LMQT/MRT/Query/URI)Syntax: igmp timeout {bc | lmqt | mrt | query | uri} <number>Parameter: Name Description
<number> Timeout value
Valid values: 1 ~ 500 (second)
Default value:
BC: 400 LMQT: 1 MRT: 10 Query: 125 URI: 1
Type: Mandatory
Description: Set IGMP protocol versionSyntax: igmp version {v1 | v2 | v3}Parameter: None
Description: Go to Gigabit Ethernet Interface execution mode from Configure modeSyntax: interface gigabit <port>Parameter: Name Description
<port> Gigabit Ethernet port number
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Go to Gigabit Ethernet link aggregation Interface execution mode from Configure modeSyntax: interface gigabit laParameter: None
Configure Mode Commands 63
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
interface xdsl
management dhcp
management dhcp timeout
management dhcp leasetime
Description: Go to xDSL Interface execution mode from Configure modeSyntax: interface xdsl <port>Parameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value:
Type: Mandatory
Description: Enable DHCP client / Disable DHCP client / Use DHCP to request and obtain IP address again
Syntax: management dhcp {enable | disable | renew}Parameter: None
Description: Set DHCP client timeout valueSyntax: management dhcp timeout <number>Parameter: Name Description
<number> DHCP timeout
Valid values: 0~4294967295 (sec)
Default value: 60
Type: Mandatory
Description: Set DHCP client lease time valueSyntax: management dhcp leasetime <number>Parameter: Name Description
<number> DHCP leasetime
Valid values: 0~4294967295 (sec)
Default value: 4294967295
Type: Mandatory
64 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
management gbe
management mgmt
Description: Set GBE port IP address / Set incoming VLAN tag management (only allowing incoming packets with the specified VLAN ID or no limit of VLAN ID)
Syntax: management gbe <ipv4 adderss> [netmask <netmask>] management gbe vlan <VLAN ID> {no-limit | <VLAN ID>}
Parameter: Name Description
ipv4address IP address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: 0.0.0.0
Type: Mandatorynetmask Netmask of the management port
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Optional<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: Set MGMT management port IP addressSyntax: management mgmt <ipv4 adderss> [netmask <netmask>]Parameter: Name Description
ipv4 address IP address with classful netmask
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: 0.0.0.0
Type: Mandatorynetmask Netmask of the management port
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Optional
Configure Mode Commands 65
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
pm clear
priority-list
profile alarm
profile igmp-acl
Description: Clear current performance monitoring data.Syntax: pm clear <port>Parameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Description: Go to Priority-list execution mode from Configure mode.Syntax: priority-listParameter: None
Description: Enter this command to go to alarm profile configuration mode.Syntax: profile alarmParameter: None
Description: Enter this command to go to IGMP ACL profile configuration modeSyntax: profile igmp-acl <profile index>Parameter: Name Description
<profile index> Profile index
Valid values:1 ~ 15
Default value: -
Type: Mandatory
66 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
profile service adsl
profile spectrum
profile tca xdsl
Description: Enter this command to go to service profile configuration modeSyntax: profile service adsl <profile index>Parameter: Name Description
<profile index> Profile index
Valid values: 2 ~ 120
Default value: -
Type: Mandatory
Description: Enter this command to go to service profile configuration modeSyntax: profile spectrum {adsl2 | adsl2plus | readsl2} <profile index>Parameter: Name Description
<profile index> Profile index
Valid values: 2 ~ 120
Default value: -
Type: Mandatory
Description: Enter this command to go to TCA profile configuration modeSyntax: profile tca xdsl <port>Parameter: Name Description
<port> Port number
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
Configure Mode Commands 67
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
remotecfg login
restore-factory
Description: Login FTP server to get remote configuration and load it to running configura-tion or write remote configuration to memory
Syntax: remotecfg login <ipv4 address> get <filename> {load | write partition <number>}Parameter: Name Description
<ipv4 address> IP address of TFTP server
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory<filename> Remote path and file name (max 31 character)
Default value: -
Type: Mandatory<number> Partition number
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Restore factory settingSyntax: restore-factoryParameter: None
68 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
rmon alarm <index> alarm_interval
rmon alarm <index> delete
Description: Set RMON alarm intervalSyntax: rmon alarm <index> alarm_interval <number>Parameter: Name Description
<index> RMON alarm entry index
Valid values: 1 ~ 64
Default value: -
Type: Mandatory<number> Alarm interval
Valid values: 0~2147483647 (0: disable)
Default value: -
Type: Mandatory
Description: Delete RMON alarm entrySyntax: rmon alarm <index> delete <number>Parameter: Name Description
<index> RMON alarm entry index
Valid values: 1 ~ 64
Default value: -
Type: Mandatory
Configure Mode Commands 69
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
rmon alarm <index> falling_eventindex
rmon alarm <index> falling_threshold
Description: Set RMON alarm falling event indexSyntax: rmon alarm <index> falling_eventindex <number>Parameter: Name Description
<index> RMON alarm entry index
Valid values: 1 ~ 64
Default value: -
Type: Mandatory<number> RMON alarm falling event index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory
Description: Set RMON alarm falling thresholdSyntax: rmon alarm <index> falling_threshold <number>Parameter: Name Description
<index> RMON alarm entry index
Valid values: 1 ~ 64
Default value: -
Type: Mandatory<number> RMON alarm falling threshold
Valid values: 0 ~ 4294967295
Default value: -
Type: Mandatory
70 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
rmon alarm <index> owner
rmon alarm <index> sample_type
rmon alarm <index> startup_alarm
Description: RMON alarm ownerSyntax: rmon alarm <index> owner <string>Parameter: Name Description
<string> Owner name
Valid values: (max 31 characters)
Default value: -
Type: Mandatory
Description: RMON alarm sample type (Compared directly with the thresholds or Difference compared with the thresholds)
Syntax: rmon alarm <index> sample_type {absolute | delta}Parameter: Name Description
<index> RMON alarm entry index
Valid values: 1 ~ 64
Default value: -
Type: Mandatory
Description: RMON startup alarm (Rising threshold alarm, Falling threshold alarm or Both rising and falling threshold alarm)
Syntax: rmon alarm <index> startup_alarm {rising | falling | both}Parameter: Name Description
<index> RMON alarm entry index
Valid values: 1 ~ 64
Default value: -
Type: Mandatory
Configure Mode Commands 71
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
rmon alarm <index> variable
Description: Source sample in statistic table
Variable Description
rx_broadcast Monitoring rx broadcast packetsrx_bytes Monitoring rx bytes packetsrx_dropped Monitoring rx dropped packetsrx_err_aligment Monitoring rx error aligment packetsrx_fragments Monitoring rx fragments packetsrx_jabber Monitoring rx jabber packetsrx_multicast Monitoring rx multicast packetsrx_oversize Monitoring rx oversize packetsrx_packets Monitoring rx packetsrx_undersize Monitoring rx undersize packetstx_single_collision Monitoring tx single collision packetstxrx_frames_64 Monitoring tx 64 octetstxrx_frames_127 Monitoring tx 65 to 127 octetstxrx_frames_255 Monitoring tx 128 to 255 octetstxrx_frames_511 Monitoring tx 256 to 511 octetstxrx_frames_1023 Monitoring tx 512 to 1023 octetstxrx_frames_1518 Monitoring tx 1024 to 1518 octets
Syntax: rmon alarm <index> variable {rx_broadcast | rx_bytes | rx_dropped | rx_err_aligment | rx_fragments | rx_jabber | rx_multicast | rx_oversize rx_packets | rx_undersize} index <number> rmon alarm <index> variable {tx_single_collision | txrx_frames_64 | txrx_frames_127 | txrx_frames_255 | txrx_frames_511 | txrx_frames_1023 | txrx_frames_1518} index <number>
Parameter: Name Description
<index> RMON alarm entry index
Valid values: 1 ~ 64
Default value: -
Type: Mandatory<number> Source index in statistic table
Valid values: 1 ~ 10
Default value: -
Type: Mandatory
72 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
rmon event <index> community
rmon event <index> delete
Description: Set RMON event communitySyntax: rmon event <index> community <string>Parameter: Name Description
<index> RMON event entry index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory<string> RMON event community
Valid values: string type value. (max 31 characters)
Default value: -
Type: Mandatory
Description: Delete RMON event entrySyntax: rmon event <index> deleteParameter: Name Description
<index> RMON event entry index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory
Configure Mode Commands 73
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
rmon event <index> description
rmon event <index> owner
Description: Description for the RMON eventSyntax: rmon event <index> description <string>Parameter: Name Description
<index> RMON event entry index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory<string> Event description
Valid values: string type value. (max 31 characters)
Default value: -
Type: Mandatory
Description: Set RMON event ownerSyntax: rmon event <index> owner <string>Parameter: Name Description
<index> RMON event entry index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory<string> Owner name
Valid values: string type value. (max 31 characters)
Default value: -
Type: Mandatory
74 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
rmon event <index> type
rmon history <index> buckets_requested
rmon history <index> delete
Description: Set RMON event type (no alarm, only syslog, only SNMP trap, or both syslog and SNMP trap)
Syntax: rmon event <index> type {none | log | trap | both}Parameter: Name Description
<index> RMON event entry index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory
Description: Set RMON history buckets requestedSyntax: rmon history <index> buckets_requested <number>Parameter: Name Description
<index> RMON history control entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory<string> Buckets requested value
Valid values: 1 ~ 65535
Default value: -
Type: Mandatory
Description: Delete RMON history entrySyntax: rmon history <index> deleteParameter: Name Description
<index> RMON history control entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory
Configure Mode Commands 75
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
rmon history <index> ifc
rmon history <index> interval
Description: Set Physical interfaceSyntax: rmon history <index> ifc <number>Parameter: Name Description
<index> RMON history control entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory<number> Physical interface index
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Set RMON history intervalSyntax: rmon history <index> interval <number>Parameter: Name Description
<index> RMON history control entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory<number> History interval
Valid values: 1~3600 (sec)
Default value: -
Type: Mandatory
76 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
rmon history <index> owner
rmon statistic <index> delete
Description: Set RMON history ownerSyntax: rmon history <index> owner <string>Parameter: Name Description
<index> RMON history control entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory<string> Owner name
Valid values: string type value. (max 31 characters)
Default value: -
Type: Mandatory
Description: Delete RMON statistic entrySyntax: rmon statistic <index> deleteParameter: Name Description
<index> RMON statistic entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory
Configure Mode Commands 77
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
rmon statistic <index> ifc
rmon statistic <index> owner
Description: Set Physical interfaceSyntax: rmon statistic <index> ifc <number>Parameter: Name Description
<index> RMON history control entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory<number> Physical interface index
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Set RMON statistic ownerSyntax: rmon statistic <index> owner <string>Parameter: Name Description
<index> RMON history control entry index
Valid values: 1 ~ 10
Default value: -
Type: Mandatory<number> Owner name
Valid values: string type value. (max 31 characters)
Default value: -
Type: Mandatory
78 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
route
route default
route delete
Description: Add routing to route tableSyntax: route <ipv4 address > netmask <ipv4 address > gateway <ipv4 address >Parameter: Name Description
<ipv4 address> IP address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
Description: Set default routeSyntax: route default <ipv4 address>Parameter: Name Description
<ipv4 address> Default route IP address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
Description: Delete routing from route tableSyntax: route delete <ipv4 address> netmask <ipv4 address>Parameter: Name Description
<ipv4 address> IP address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
Configure Mode Commands 79
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
runningcfg active partition
runningcfg load partition
runningcfg login
Description: Load running configuration from memorySyntax: runningcfg load partition <number>Parameter: Name Description
<number> Partition number
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Load running configuration from memorySyntax: runningcfg load partition <number>Parameter: Name Description
<number> Partition number
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Login FTP serverSyntax: runningcfg login <ipv4 address> put <filename>Parameter: Name Description
<ipv4 address> IP address of TFTP server.
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory<filename> Path and File name (max 31 characters)
Default value: -
Type: Mandatory
80 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
runningcfg write partition
snmp community
Description: Write running configuration to memorySyntax: runningcfg write partition <number>Parameter: Name Description
<number> Partition number
Valid values: 1 ~ 2
Default value: -
Type: Mandatory
Description: Set snmp read and write community stringSyntax: snmp <index> community rw <community>Parameter: Name Description
<index> SNMP index
Valid values: 2 ~ 32
Default value: -
Type: Mandatory<community> Community string. (max 63 character; note that commu-
nity names beginning with a digital number are not allowed)
Default value: public
Type: Mandatory
Configure Mode Commands 81
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
snmp notify
snmp target <name> address
Description: Set SNMP notify information / Delete SNMP notify tagSyntax: snmp notify <name> {tag <tag> | delete}Parameter: Name Description
<name> Notify name string. (max 31 characters)
Default value: -
Type: Mandatory<tag> Notify Tag string. (max 31 characters)
Default value: -
Type: Mandatory
Description: Set SNMP target addressSyntax: snmp target <name> address <ipv4 address> port <port>Parameter: Name Description
<name> SNMP target name
Valid values: (max 31 characters)
Default value: -
Type: Mandatory<ipv4 address> Target IP address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory<port> SNMP target port
Valid values: 1 ~ 65535
Default value: 162
Type: Mandatory
82 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
snmp target <name> delete
snmp target <name> tag-list
sntp polling interval
Description: Delete SNMP target tag listSyntax: snmp target <name> deleteParameter: Name Description
<name> SNMP target name
Valid values: (max 31 characters)
Default value: -
Type: Mandatory
Description: Set SNMP target tag listSyntax: snmp target <name> tag-list <string>Parameter: Name Description
<name> SNMP target name
Valid values: (max 31 characters)
Default value: -
Type: Mandatory<string> SNMP target tag list
Valid values: (max 31 characters)
Default value: -
Type: Mandatory
Description: Set SNTP polling intervalSyntax: sntp polling interval <number>Parameter: Name Description
<number> Polling interval (in seconds)
Valid values: 60~65535
Default value: 600
Type: Mandatory
Configure Mode Commands 83
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
sntp server address
stp
stp enable
stp disable
stp forward delay
Description: Set SNTP server ip addressSyntax: snmp server address <ipv4 address>Parameter: Name Description
<ipv4 address> IP address of SNTP server.
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: 0.0.0.0
Type: Mandatory
Description: STP set defaultSyntax: stp [default]Parameter: None
Description: Spanning Tree Protocol (STP)Syntax: stp enableParameter: None
Description: Disable Spanning Tree Protocol (STP)Syntax: stp disableParameter: None
Description: Set STP forward delaySyntax: stp forward delay <number>Parameter: Name Description
<number> STP forward delay value
Valid values: 4 ~ 30
Default value:-
Type: Mandatory
84 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
stp hello time
stp max-age
stp priority
stp version
Description: Set STP hello timeSyntax: stp hello time <number>Parameter: Name Description
<number> STP hello time value
Valid values: 1~ 10
Default value:-
Type: Mandatory
Description: Set STP maximum ageSyntax: stp max-age <number>Parameter: Name Description
<number> STP maximum age value
Valid values: 6~ 40
Default value:-
Type: Mandatory
Description: Set STP priority valueSyntax: stp priority <number>Parameter: Name Description
<number> STP priority value
Valid values: 0 - 65535
Default value: 32768
Type: Mandatory
Description: Set version to STP or RSTPSyntax: stp version {STP | RSTP}Parameter: None
Configure Mode Commands 85
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
syslog server
trunk-mode
temperature threshold
Description: Set system log serverSyntax: syslog server <ipv4 address>Parameter: Name Description
<ipv4 address> Syslog server IP address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: 0.0.0.0
Type: Mandatory
Description: Set Trunk mode to Non Link Aggregation or Link Aggregation with LACPSyntax: trunk-mode {general | lacp}Parameter: None
Description: Shelf temperature thresholdSyntax: temperature threshold {up | down | fan} <number>Parameter: Name Description
<number> Temperature threshold value
Valid values:
up: -55 ~ 85 down: -55 ~ 85 fan: -40 ~ 15
Default value:
up: 65 down: 65 fan: -40
Type: Mandatory
86 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
temperature shelf time
time set date
Description: Shelf timeSyntax: temperature shelf time {up | down} <number>Parameter: Name Description
<number> Shelf time value
Valid values: 1 ~ 255
Default value: 10
Type: Mandatory
Description: Set date of the system (default is current system date)Syntax: time set date {MM-DD-YY | MM-DD-CCYY}Parameter: Name Description
MM Month
Valid values: 01-12
Type: MandatoryDD Day of month
Valid values: 01-31
Type: MandatoryCC Century
Valid values: 0
Type: OptionalYY Short year start from 2000
Valid values: 00-99
Type: Mandatory
Configure Mode Commands 87
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
time set time
Description: Set time of the system (default is current system time)Syntax: time set time {hh:mm | hh:mm:ss}Parameter: Name Description
hh Hour in 24-hour format
Valid values: 00-23
Type: Mandatorymm Minute
Valid values: 00-59
Type: Mandatoryss Second
Valid values: 00-59
Type: Optional
88 Configure Mode Commands
Model 3101RC Admin Reference Guide 5 • Configure Mode Commands
time set timezone
Description: Set timezoneSyntax: time set timezone <timezone>Parameter: Name Description
timezone Timezone
Valid values: idl (GMT-12:00) International Date Lineidlw (GMT-12:00) International Date Line Westnt (GMT-11:00) Nome Timeahst (GMT-10:00) Alaska GMT Hawaii Standard Timehst (GMT-10:00) Hawaiian Standard Timebdt (GMT-10:00) BDTcat (GMT-10:00) Central Alaska Timeyst (GMT-09:00) Yukon Standard Timehdt (GMT-09:00) HDTpst (GMT-08:00) Pacific Standard Timeydt (GMT-08:00) YDTmst (GMT-07:00) Mountain Standard Timepdt (GMT-07:00) Pacific Daylight Timecst (GMT-06:00) Central Standard Timemdt (GMT-06:00) Mountain Daylight Timeest (GMT-05:00) Eastan Standard Timecdt (GMT-05:00) Central Daylight Timeast (GMT-04:00) Atlantic Standard Timeedt (GMT-04:00) Eastan Daylight Timenst (GMT-03:30) Newfoundland Standard Timeadt (GMT-03:00) Altantic Daylight Timebst (GMT-03:00) Brazil Standard Timegst (GMT-03:00) Greenland Standard Timeat (GMT-02:00) Azores Timewat (GMT-01:00) West Africa Timegmt (GMT) Greenwich Mean Timewet (GMT+00:00) Western European Timeut (GMT+00:00) Universal Timeutc (GMT+00:00) Universal Timecet (GMT+01:00) Central European Timebst (GMT+01:00) British Summer Timemet (GMT+01:00) Middle European Timemewt (GMT+01:00) Middle Eruopean Winter Time
Configure Mode Commands 89
5 • Configure Mode Commands Model 3101RC Admin Reference Guide
swt (GMT+01:00) Swedish Winter Timefwt (GMT+01:00) French Winter Timeeet (GMT+02:00) Eastean European Timemest (GMT+02:00) Middle European Summer Timefst (GMT+02:00) French Summer Timebt (GMT+03:00) Baghdad Timeit (GMT+03:30) Iran Timezp4 (GMT+04:00) GMT Plus 4 Hourszp5 (GMT+05:00) GMT Plus 5 Hoursist (GMT+05:30) Indian Standard Timezp6 (GMT+06:00) GMT Plus 6 Hoursnst (GMT+06:30) North Sumatra Timesst (GMT+07:00) South Smatra Timewast (GMT+07:00) West Australian Standard Timejt (GMT+07:30) Java Timecct (GMT+08:00) China Coast Timehst (GMT+08:00) HongKong Standard Timewadt (GMT+08:00) West Australian Daylight Timewst (GMT+08:00) WSTjst (GMT+09:00) Japan Standard Timekst (GMT+09:00) Korean Standard Timecast (GMT+09:30) Central Australian Standard Timesast (GMT+09:30) South Australian Standard Timejdt (GMT+10:00) JDTgst (GMT+10:00) Guam Standard Timeeast (GMT+10:00) East Australian Standard Timecadt (GMT+10:30) Central Austrlian Daylight Timesadt GMT+10:30) South Australian Daylight Timeeadt (GMT+11:00) East Australian Daylight Timenzt (GMT+12:00) New Zealand Timenzst (GMT+12:00) New Zealand Standard Timeidle (GMT+12:00) International Date Line Eastnzdt (GMT+13:00) New Zealand Daylight Time Type: Mandatory
90 Configure Mode Commands
Chapter 6 Ethernet Interface and Interface Mode Commands
Chapter contentsEthernet Interface Mode Commands.....................................................................................................................92
bridge ..............................................................................................................................................................92
gbe admin .......................................................................................................................................................92
gbe speed ........................................................................................................................................................92Interface Mode Commands ...................................................................................................................................93
bridge ..............................................................................................................................................................93
adsl-config ......................................................................................................................................................93
91
6 • Ethernet Interface and Interface Mode Commands Model 3101RC Admin Reference Guide
Ethernet Interface Mode CommandsThe commands in this section can be executed only in the Ethernet Interface execution mode.
Note Ethernet interface mode commands are executed with the (ethernet-intf-conf)# prompt.
bridge
gbe admin
gbe speed
Description: Enter bridge configuration mode / Set bridge port to default statusSyntax: bridge [default]Parameter: None
Description: Set Gigabit Ethernet administrative status (ON/OFF)Syntax: gbe admin {on | off}Parameter: None
Description: Set Gigabit ethernet speed to auto-negotiate, 100Mbps half duplexing, or 100Mbps full duplexing / Set Copper or Fiber as the first priority of GBE physical interface
Syntax: gbe speed {auto | half_100mbps | full_100mbps | physical {copper | fiber}}Parameter: None
92 Ethernet Interface Mode Commands
Model 3101RC Admin Reference Guide 6 • Ethernet Interface and Interface Mode Commands
Interface Mode CommandsThe commands in this section can be executed only in the Interface execution mode.
Note Ethernet interface mode commands are executed with the (intf-conf)# prompt.
bridge
adsl-config
Description: Enter ATM-bridge configuration mode / Disable bridge portSyntax: bridge <bridge id> [disable]Parameter: Name Description
bridge Bridge number
Valid values: 1 ~ 8
Default value: 1
Type: Mandatory
Description: Enter adsl configuration modeSyntax: adsl-configParameter: None
Interface Mode Commands 93
6 • Ethernet Interface and Interface Mode Commands Model 3101RC Admin Reference Guide
94 Interface Mode Commands
Chapter 7 ATM Bridge Mode Commands
Chapter contentsATM Bridge Mode Commands.............................................................................................................................96
accfrm .............................................................................................................................................................96
default vlan .....................................................................................................................................................96default prio .....................................................................................................................................................96
dhcp-relay .......................................................................................................................................................97
egress ..............................................................................................................................................................97igmp-acl bind ..................................................................................................................................................97
ingress .............................................................................................................................................................97
isolation ..........................................................................................................................................................98max-mac .........................................................................................................................................................98
priority-regen ..................................................................................................................................................98
pvc ..................................................................................................................................................................99pvc atmdesc ....................................................................................................................................................99
pvc encapsulation ............................................................................................................................................99
stack vlan ........................................................................................................................................................99vlan ...............................................................................................................................................................100
vlan list .........................................................................................................................................................100
95
7 • ATM Bridge Mode Commands Model 3101RC Admin Reference Guide
ATM Bridge Mode CommandsThe commands in this section can be executed only in the ATM Bridge execution mode.
Note ATM Bridge mode commands are executed with the (bridge-atm-conf)# prompt.
accfrm
default vlan
default prio
Description: Set acceptable frame type (untagged only, tagged only, or all)Syntax: accfrm {all | tag | untag}Parameter: None
Description: Set default VLAN ID for a bridge portSyntax: default vlan <VLAN ID>Parameter: Name Description
<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: 1
Type: Mandatory
Description: Set default priority value for a bridge portSyntax: default prio <prio ID>Parameter: Name Description
<prio ID> Priority ID
Valid values: 0 ~ 7
Default value: 0
Type: Mandatory
96 ATM Bridge Mode Commands
Model 3101RC Admin Reference Guide 7 • ATM Bridge Mode Commands
dhcp-relay
egress
igmp-acl bind
ingress
Description: Enable/disable DHCP relay, or Set circuit ID/remote ID for identifying the subscriberSyntax: dhcp-relay {trusted | untrusted | circuit <circuit ID> | remote <remote ID>}Parameter: Name Description
<circuit ID> Circuit ID
Valid values: string type (max length 48)
Default value: -
Type: Mandatory<remote ID> Remote ID
Valid values: string type (max length 48)
Default value: -
Type: Mandatory
Description: Default PVID egress taged/untagged settingSyntax: egress {tag | untag}Parameter: None
Description: IGMP ACL (Access Control List) configurationSyntax: igmp-acl bind {<number> [on] | on | off | reset}Parameter: Name Description
<number> IGMP ACL profile index
Valid values: 1~ 15
Default value: 0
Type: Mandatory
Description: Enable/disable ingress filter modeSyntax: ingress {enable | disable}Parameter: None
ATM Bridge Mode Commands 97
7 • ATM Bridge Mode Commands Model 3101RC Admin Reference Guide
isolation
max-mac
priority-regen
Description: Enable/Disable default PVID isolation settingSyntax: isolation [disable]Parameter: None
Description: Set the maximum users allowed to access Internet based on user MAC address counter on per ATM PVC basis
Syntax: max-mac <number>Parameter: Name Description
<number> Maximum number of the MAC addresses
Valid values: 1 ~ 128
Default value: 0
Type: Mandatory
Description: VLAN priority value regeneration or Delete VLAN priority tag filterSyntax: priority-regen incoming <incoming prio> {outgoing <outgoing prio> | disable}Parameter: Name Description
<incoming prio> Incoming VLAN priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory<outgoing prio> Outgoing VLAN priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory
98 ATM Bridge Mode Commands
Model 3101RC Admin Reference Guide 7 • ATM Bridge Mode Commands
pvc
pvc atmdesc
pvc encapsulation
stack vlan
Description: Set VPI and VCISyntax: pvc <VPI>/<VCI>Parameter: Name Description
<VPI> Virtual Path identifier
Valid values: 0 ~ 255
Default value: 0
Type: Mandatory<VCI> Virtual Channel Identifier
Valid values: 21, 32~65535
Default value: 35
Type: Mandatory
Description: Set ATM descriptorSyntax: pvc atmdesc <DESCNUM>Parameter: Name Description
<DESCNUM> ATM descriptor number
Valid values: Enter ‘pvc atmdesc’ command to see the descriptor list.
Default value: -
Type: Mandatory
Description: Set Encapsulation typeSyntax: pvc encapsulation {llc | vcmux}Parameter: None
Description: Enable/Disable stacking VLANSyntax: stack vlan [disable]Parameter: None
ATM Bridge Mode Commands 99
7 • ATM Bridge Mode Commands Model 3101RC Admin Reference Guide
vlan
vlan list
Description: Set VLAN tag/untag, enable/disable isolation, show memberset setting by VLAN, or delete from memberset table
Syntax: vlan <VLAN ID> {tag isolation [disable] | untag isolation [disable] | list disable}Parameter: Name Description
<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: Show memberset setting by VLANSyntax: vlan listParameter: None
100 ATM Bridge Mode Commands
Chapter 8 GBE Bridge and GBE-LA Bridge Mode Commands
Chapter contentsGBE Bridge Mode Commands............................................................................................................................102
accfrm ...........................................................................................................................................................102
default vlan ...................................................................................................................................................102
default prio ...................................................................................................................................................102egress ............................................................................................................................................................102
igmp-acl bind ................................................................................................................................................103
ingress ...........................................................................................................................................................103isolation ........................................................................................................................................................103
max-mac .......................................................................................................................................................103
stack vlan ......................................................................................................................................................104stpport edge ..................................................................................................................................................104
stpport enable/disable ...................................................................................................................................104
stpport pathcost ............................................................................................................................................104stpport priority ..............................................................................................................................................104
vlan ...............................................................................................................................................................105
vlan list .........................................................................................................................................................105GBE-LA Bridge Mode Commands......................................................................................................................106
accfrm ...........................................................................................................................................................106
default vlan ...................................................................................................................................................106default prio ...................................................................................................................................................106
egress ............................................................................................................................................................106
igmp-acl bind ................................................................................................................................................107ingress ...........................................................................................................................................................107
isolation ........................................................................................................................................................107
max-mac .......................................................................................................................................................107stack vlan ......................................................................................................................................................108
lacp actor priority system ..............................................................................................................................108
lacp actor system id .......................................................................................................................................108link mode ......................................................................................................................................................108
101
8 • GBE Bridge and GBE-LA Bridge Mode Commands Model 3101RC Admin Reference Guide
GBE Bridge Mode CommandsThe commands in this section can be executed only in the GBE Bridge execution mode.
accfrm
default vlan
default prio
egress
Description: Set acceptable frame type (untagged only, tagged only, or all)Syntax: accfrm {all | tag | untag}Parameter: None
Description: Set default VLAN ID for a bridge portSyntax: default vlan <VLAN ID>Parameter: Name Description
<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: 1
Type: Mandatory
Description: Set default priority value for a bridge portSyntax: default prio <prio ID>Parameter: Name Description
<prio ID> Priority ID
Valid values: 0 ~ 7
Default value: 0
Type: Mandatory
Description: Default PVID egress taged/untagged settingSyntax: egress {tag | untag}Parameter: None
102 GBE Bridge Mode Commands
Model 3101RC Admin Reference Guide 8 • GBE Bridge and GBE-LA Bridge Mode Commands
igmp-acl bind
ingress
isolation
max-mac
Description: IGMP ACL (Access Control List) configurationSyntax: igmp-acl bind {<number> [on] | on | off | reset}Parameter: Name Description
<number> IGMP ACL profile index
Valid values: 1~ 15
Default value: 0
Type: Mandatory
Description: Enable/disable ingress filter modeSyntax: ingress {enable | disable}Parameter: None
Description: Enable/Disable default PVID isolation settingSyntax: isolation [disable]Parameter: None
Description: Set the maximum users allowed to access Internet based on user MAC address counter on per ATM PVC basis
Syntax: max-mac <number>Parameter: Name Description
<number> Maximum number of the MAC addresses
Valid values: 1 ~ 4096 for GBE interface, 1 ~ 128 for ADSL interface
Default value: 0
Type: Mandatory
GBE Bridge Mode Commands 103
8 • GBE Bridge and GBE-LA Bridge Mode Commands Model 3101RC Admin Reference Guide
stack vlan
stpport edge
stpport enable/disable
stpport pathcost
stpport priority
Description: Enable/Disable stacking VLANSyntax: stack vlan [disable]Parameter: None
Description: Set edge statusSyntax: stpport edg {enable | disable}Parameter: None
Description: Enable/Disable STP portSyntax: stpport {enable | disable}Parameter: None
Description: Set STP port pathcostSyntax: stpport pathcost <number>Parameter: Name Description
<number> Path cost value
Valid values: 1 ~ 65535
Default value: 0
Type: Mandatory
Description: Set STP port prioritySyntax: stpport priority <number>Parameter: Name Description
<number> Priority value
Valid values: 0~240,step 16
Default value: 255
Type: Mandatory
104 GBE Bridge Mode Commands
Model 3101RC Admin Reference Guide 8 • GBE Bridge and GBE-LA Bridge Mode Commands
vlan
vlan list
Description: Set VLAN tag/untag, enable/disable isolation, show memberset setting by VLAN, or delete from memberset table
Syntax: vlan <VLAN ID> {tag isolation [disable] | untag isolation [disable] | list | disable}Parameter: Name Description
VLAN ID VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: Show memberset setting by VLANSyntax: vlan listParameter: None
GBE Bridge Mode Commands 105
8 • GBE Bridge and GBE-LA Bridge Mode Commands Model 3101RC Admin Reference Guide
GBE-LA Bridge Mode Commands
accfrm
default vlan
default prio
egress
Description: Set acceptable frame type (untagged only, tagged only, or all)Syntax: accfrm {all | tag | untag}Parameter: None
Description: Set default VLAN ID for a bridge portSyntax: default vlan <VLAN ID>Parameter: Name Description
<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: 1
Type: Mandatory
Description: Set default priority value for a bridge portSyntax: default prio <prio ID>Parameter: Name Description
<prio ID> Priority ID
Valid values: 0 ~ 7
Default value: 0
Type: Mandatory
Description: Default PVID egress taged/untagged settingSyntax: egress {tag | untag}Parameter: None
106 GBE-LA Bridge Mode Commands
Model 3101RC Admin Reference Guide 8 • GBE Bridge and GBE-LA Bridge Mode Commands
igmp-acl bind
ingress
isolation
max-mac
Description: IGMP ACL (Access Control List) configurationSyntax: igmp-acl bind {<number> [on] | on | off | reset}Parameter: Name Description
<number> IGMP ACL profile index
Valid values: 1~ 15
Default value: 0
Type: Mandatory
Description: Enable/disable ingress filter modeSyntax: ingress {enable | disable}Parameter: None
Description: Enable/Disable default PVID isolation settingSyntax: isolation [disable]Parameter: None
Description: Set the maximum users allowed to access Internet based on user MAC address counter on per ATM PVC basis
Syntax: max-mac <number>Parameter: Name Description
<number> Maximum number of the MAC addresses
Valid values: 1 ~ 4096
Default value: 0
Type: Mandatory
GBE-LA Bridge Mode Commands 107
8 • GBE Bridge and GBE-LA Bridge Mode Commands Model 3101RC Admin Reference Guide
stack vlan
lacp actor priority system
lacp actor system id
link mode
Description: Enable/Disable stacking VLANSyntax: stack vlan [disable]Parameter: None
Description: Set actor's system priority (Link aggregation only).Syntax: lacp actor priority system <number>Parameter: Name Description
<number> Set system priority value.
Valid values: 0 - 65535
Default value: -
Type: Mandatory
Description: Set LACP actor's system ID (Link aggregation only).Syntax: lacp actor system id <system ID>Parameter: Name Description
<number> Set actor’s system ID
Valid values: MAC address <xx:xx:xx:xx:xx:xx>
Default value: -
Type: Mandatory
Description: Set link mode (uplink mode or user mode)Syntax: link mode {uplink | user}Parameter: None
108 GBE-LA Bridge Mode Commands
Chapter 9 ADSL Configure Mode Commands
Chapter contentsADSL Configure Mode Commands ....................................................................................................................110
line mode carrier ...........................................................................................................................................110
line mode diagnostic .....................................................................................................................................110line mode force-l3 .........................................................................................................................................110
line mode mask .............................................................................................................................................110
line port ........................................................................................................................................................111line profile .....................................................................................................................................................111
line status service ...........................................................................................................................................111
109
9 • ADSL Configure Mode Commands Model 3101RC Admin Reference Guide
ADSL Configure Mode CommandsThe commands in this section can be executed only in the ADSL Config mode.
Note ADSL Config mode commands are executed with the (adsl-intf-conf)# prompt.
line mode carrier
line mode diagnostic
line mode force-l3
line mode mask
Description: Set/Clear xDSL line carrierSyntax: line mode carrier {on | off | oninit}Parameter: None
Description: Set/Clear xDSL line diagnosticsSyntax: line mode diagnostic {init | off}Parameter: None
Description: Set force to power management L3 mode or notSyntax: line mode force-l3 {on | off}Parameter: None
Description: Set/Clear xDSL line Operational mode maskSyntax: line mode mask {set | clear } <opmode ID>Parameter: Name Description
<opmode id> The ID of allowed ADSL modes of operation.
Valid values: Use ‘list opmode’ command to see all the operation modes. Or refer to Appendix A on page 165.
Default value: -
Type: Mandatory
110 ADSL Configure Mode Commands
Model 3101RC Admin Reference Guide 9 • ADSL Configure Mode Commands
line port
line profile
line status service
Description: Set xDSL line port informationSyntax: line port {id <id> | description <desc> | phone <phone number>}Parameter: Name Description
<id> Line ID name (max 32 characters)
Default value: -
Type: Mandatory<desc> Line port description (max 48 character)
Default value: -
Type: Mandatory<phone number> Phone number. (max 32 characters)
Valid values: no limit format
Default value: -
Type: Mandatory
Description: Create xDSL line profileSyntax: line profile {service | spectrum} <number>Parameter: Name Description
<number> Profile index
Valid values: 1 ~ 120
Default value: -
Type: Mandatory
Description: Set xDSL line service status (service ON/OFF/RESET)Syntax: line status service {on | off | reset}Parameter: None
ADSL Configure Mode Commands 111
9 • ADSL Configure Mode Commands Model 3101RC Admin Reference Guide
112 ADSL Configure Mode Commands
Chapter 10 Access List Mode Commands
Chapter contentsAccess List Mode Commands ..............................................................................................................................114
bcrate ............................................................................................................................................................114
bcrate list ......................................................................................................................................................114dstip ..............................................................................................................................................................115
dstip list ........................................................................................................................................................115
ipprotocol .....................................................................................................................................................116ipprotocol list ................................................................................................................................................117
l4dstport .......................................................................................................................................................117
l4dstport list ..................................................................................................................................................117mcfldrate list .................................................................................................................................................118
mcfldrate vlan ...............................................................................................................................................118
outportrate ....................................................................................................................................................119outportrate list ..............................................................................................................................................119
policer ...........................................................................................................................................................120
policer list .....................................................................................................................................................120pppoe deny ...................................................................................................................................................121
pppoe disable ................................................................................................................................................121
pppoe list ......................................................................................................................................................121srcip ..............................................................................................................................................................122
srcip list ........................................................................................................................................................122
srcmac ...........................................................................................................................................................123srcmac list .....................................................................................................................................................123
113
10 • Access List Mode Commands Model 3101RC Admin Reference Guide
Access List Mode CommandsThe commands in this section can be executed only in the ACL execution mode.
Note ACL mode commands are executed with the (acl-conf)# prompt.
bcrate
bcrate list
Description: Broadcast rate limiting CIR and LBS settingSyntax: bcrate cir <cir> lbs <lbs>Parameter: Name Description
<cir> Committed Information Rate (bytes/second)
Valid values: 100 ~ 1000000000
Default value: 80000
Type: Mandatory<lbs> Leakage Bucket Size (bytes/millisecond)
Valid values: 1 ~ 1024
Default value: 80
Type: Mandatory
Description: Show broadcast rate limiting listSyntax: bcrate listParameter: None
114 Access List Mode Commands
Model 3101RC Admin Reference Guide 10 • Access List Mode Commands
dstip
dstip list
Description: Specify dest IP address of packets to filter / Show specify dest IP deny access list entry
Syntax: dstip <number> deny {xdsl <port>/<pvc> | gigabit {<port> | la}} ip <ipv4 address> <netmask> dstip <number> list
Parameter: Name Description
<number> Dest IP deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<port> Port number
Valid values: 1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatory<ipv4 address> Destination IP address
Valid values: xxx.xxx.xxx.xxx (xxx: 0-255)
Default value: 0.0.0.0
Type: Mandatory<netmask> Subnet mask
Valid values: xxx.xxx.xxx.xxx (xxx: 0-255)
Default value: -
Type: Optional
Description: Show dest IP deny access listSyntax: dstip listParameter: None
Access List Mode Commands 115
10 • Access List Mode Commands Model 3101RC Admin Reference Guide
ipprotocol
Description: Specify IP Protocol of packets to reject / Show specify IP protocol access list entry / Delete specify IP protocol deny access list entry
Syntax: ipprotocol <number> deny {xdsl <port>/<pvc> | gigabit {<port> | la}} protocol <protocol> ipprotocol <number> list ipprotocol <number> disable
Parameter: Name Description
<number> IP Protocol deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<port> Port number
Valid values: 1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatoryprotocol Input protocol name
Valid values:
icmp – (ICMP) Internet Control Message <1> igmp – (IGMP) Internet Group Management <2> ipinip – IP in IP (encapsulation) <4> tcp – (TCP) Transmission Control <6> igp – (IGP) Any private interior gateway <9> udp – (UDP) User Datagram <17> gre – GRE) General Routing Encapsulation <47> eigrp – EIGRP <88> ospf – OSPFIGP <89>
Default value: 0.0.0.0
Type: Mandatory
116 Access List Mode Commands
Model 3101RC Admin Reference Guide 10 • Access List Mode Commands
ipprotocol list
l4dstport
l4dstport list
Description: Show IP protocol deny access listSyntax: ipprotocol listParameter: None
Description: Specify L4 dest port of packets to reject / Show specify L4 dest port access list entry / Delete specify L4 dest port deny access list entry
Syntax: l4dstport <number> {xdsl <port>/<pvc> | gigabit {<port> | la}} port <port number> l4dstport <number> list l4dstport <number> disable
Parameter: Name Description
<number> L4 dest port deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<port> Port number
Valid values: 1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatory<port number> L4 destination port number
Valid values: 1 ~ 65535
Default value: -
Type: Mandatory
Description: Show L4 dest port deny access listSyntax: l4dstport listParameter: None
Access List Mode Commands 117
10 • Access List Mode Commands Model 3101RC Admin Reference Guide
mcfldrate list
mcfldrate vlan
Description: Show flooding rate limiting listSyntax: mcfldrate listParameter: None
Description: Show flooding rate limiting listSyntax: mcfldrate vlan <VLAN ID> {list | disable | cir <cir> lbs <lbs>}Parameter: Name Description
<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory<cir> Committed Information Rate (bytes/second)
Valid values: 100 ~ 1000000000
Default value: 80000
Type: Mandatory<lbs> Leakage Bucket Size (bytes/millisecond)
Valid values: 1 ~ 1024
Default value: 80
Type: Mandatory
118 Access List Mode Commands
Model 3101RC Admin Reference Guide 10 • Access List Mode Commands
outportrate
outportrate list
Description: Bridge out port rate limitingSyntax: outportrate {xdsl <port>/<pvc> | gigabit {<port> | la}} list
outportrate {xdsl <port>/<pvc> | gigabit {<port> | la}} disable outportrate {xdsl <port>/<pvc> | gigabit {<port> | la}} policer <number>
Parameter: Name Description
<port> Port number
Valid values:1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 4
Default value: -
Type: Mandatory<number> Policer index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory
Description: Show all outport rate limiting listSyntax: outportrate listParameter: None
Access List Mode Commands 119
10 • Access List Mode Commands Model 3101RC Admin Reference Guide
policer
policer list
Description: Set policer profile / Delete policer profile.Syntax: policer <number> cir <cir> lbs <lbs>
policer <number> deleteParameter: Name Description
<number> Policer profile index
Valid values: 1 ~ 128
Default value: -
Type: Mandatory<cir> Committed Information Rate
Valid values: 100 ~ 1000000000
Default value: 80000
Type: Mandatory<lbs> Leakage Bucket Size
Valid values: 1 ~ 1024
Default value: 80
Type: Mandatory
Description: Display policer profileSyntax: policer listParameter: None
120 Access List Mode Commands
Model 3101RC Admin Reference Guide 10 • Access List Mode Commands
pppoe deny
pppoe disable
pppoe list
Description: Specify PPPoE packets to rejectSyntax: pppoe deny {xdsl <port>/<pvc> | gigabit {<port> | la}}Parameter: Name Description
<port> Port number
Valid values: 1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatory
Description: Disable PPPoE deny access list entrySyntax: pppoe disable {xdsl <port>/<pvc> | gigabit {<port> | la}}Parameter: Name Description
<port> Port number
Valid values: 1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatory
Description: Show PPPoE deny access listSyntax: pppoe listParameter: None
Access List Mode Commands 121
10 • Access List Mode Commands Model 3101RC Admin Reference Guide
srcip
srcip list
Description: Specify source IP address of packets to filter / Show specify source IP deny access list entry / Delete specify source IP deny access list entry
Syntax: srcip <number> deny {xdsl <port>/<pvc> | gigabit {<port> | la}} ip <ipv4 address> <net mask> srcip <number> list srcip <number> disable
Parameter: Name Description
<number> Source IP deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<port> Port number
Valid values: 1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatory<ipv4 address> Destination IP address
Valid values: xxx.xxx.xxx.xxx (xxx: 0-255)
Default value: 0.0.0.0
Type: Mandatory<netmask> Subnet mask
Valid values: xxx.xxx.xxx.xxx (xxx: 0-255)
Default value: -
Type: Optional
Description: Show source IP deny access listSyntax: srcip listParameter: None
122 Access List Mode Commands
Model 3101RC Admin Reference Guide 10 • Access List Mode Commands
srcmac
srcmac list
Description: Specify source MAC of packets to reject / Show specify source MAC deny access list entry / Delete specify source MAC deny access list entry
Syntax: srcmac <number> {xdsl <port>/<pvc> | gigabit {<port> | la}} mac <mac address> srcmac <number> list srcmac <number> disable
Parameter: Name Description
<number> Source MAC deny access list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<port> Port number
Valid values: 1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1 ~ 12
Default value: -
Type: Mandatory<mac address> MAC address
Valid values: xx:xx:xx:xx:xx:xx (xx: 00-ff)
Default value: 00:00:00:00:00:00
Type: Mandatory
Description: Show source MAC deny access listSyntax: srcmac listParameter: None
Access List Mode Commands 123
10 • Access List Mode Commands Model 3101RC Admin Reference Guide
124 Access List Mode Commands
Chapter 11 ATM Description Mode Commands
Chapter contentsATM Description Mode Commands...................................................................................................................126
cbr ................................................................................................................................................................126
no atmdesc ....................................................................................................................................................126ubr1 ..............................................................................................................................................................127
ubr2 ..............................................................................................................................................................127
unshp ............................................................................................................................................................128vbr1 ..............................................................................................................................................................128
vbr2 ..............................................................................................................................................................129
vbr3 ..............................................................................................................................................................130
125
11 • ATM Description Mode Commands Model 3101RC Admin Reference Guide
ATM Description Mode Commands
Note ATM Description mode commands are executed with the (atm-desc-conf)# prompt.
cbr
no atmdesc
Description: CBR traffic settingSyntax: cbr <index> pcr <pcr> cdvt <cdvt>Parameter: Name Description
<index> ATM Descriptor index
Valid values: 1 ~ 251
Default value: -
Type: Mandatory<pcr> Peak cell rate number
Valid values: 0 ~65535
Default value: -
Type: Mandatory<cvdt> Cell Delay Variation Tolerance
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory
Description: Delete ATM DescriptionSyntax: no atmdesc <number>Parameter: Name Description
<number> ATM Descriptor index
Valid values: 1 ~ 251
Default value: -
Type: Mandatory
126 ATM Description Mode Commands
Model 3101RC Admin Reference Guide 11 • ATM Description Mode Commands
ubr1
ubr2
Description: UBR type 1 traffic setting (atmNoClpNoScrCdvt)Syntax: ubr1 <index> pcr <pcr> cdvt <cdvt>Parameter: Name Description
<index> ATM Descriptor index
Valid values: 1 ~ 251
Default value: -
Type: Mandatory<pcr> Peak cell rate number
Valid values: 0 ~65535
Default value: -
Type: Mandatory<cvdt> Cell Delay Variation Tolerance
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory
Description: UBR type 2 traffic setting (atmNoClpTaggingNoScr)Syntax: ubr2 <index> pcr <pcr> cdvt <cdvt>Parameter: Name Description
<index> ATM Descriptor index
Valid values: 1 ~ 251
Default value: -
Type: Mandatory<pcr> Peak cell rate number
Valid values: 0 ~65535
Default value: -
Type: Mandatory<cvdt> Cell Delay Variation Tolerance
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory
ATM Description Mode Commands 127
11 • ATM Description Mode Commands Model 3101RC Admin Reference Guide
unshp
vbr1
Description: unshaped traffic setting (atmNoTrafficDescriptor)Syntax: unshp <index>Parameter: Name Description
<index> ATM Descriptor index
Valid values: 1 ~ 251
Default value: -
Type: Mandatory
Description: VBR type 1 traffic setting (atmNoClpScrCdvt)Syntax: vbr1 <index> pcr <pcr> cdvt <cdvt> scr <scr> mbs <mbs>Parameter: Name Description
<index> ATM Descriptor index
Valid values: 1 ~ 251
Default value: -
Type: Mandatory<pcr> Peak cell rate number
Valid values: 0 ~65535
Default value: -
Type: Mandatory<cvdt> Cell Delay Variation Tolerance
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory<scr> Sustained Cell rate
Valid values: 0 ~65535
Default value: -
Type: Mandatory<mbs> Maximum Burst Size
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory
128 ATM Description Mode Commands
Model 3101RC Admin Reference Guide 11 • ATM Description Mode Commands
vbr2
Description: VBR type 2 traffic setting (atmClpNoTaggingScrCdvt)Syntax: vbr2 <index> pcr <pcr> cdvt <cdvt> scr <scr> mbs <mbs>Parameter: Name Description
<index> ATM Descriptor index
Valid values: 1 ~ 251
Default value: -
Type: Mandatory<pcr> Peak cell rate number
Valid values: 0 ~65535
Default value: -
Type: Mandatory<cvdt> Cell Delay Variation Tolerance
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory<scr> Sustained Cell rate
Valid values: 0 ~65535
Default value: -
Type: Mandatory<mbs> Maximum Burst Size
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory
ATM Description Mode Commands 129
11 • ATM Description Mode Commands Model 3101RC Admin Reference Guide
vbr3
Description: VBR type 3 traffic setting (atmClpTaggingScrCdvt)Syntax: vbr3 <index> pcr <pcr> cdvt <cdvt> scr <scr> mbs <mbs>Parameter: Name Description
<index> ATM Descriptor index
Valid values: 1 ~ 251
Default value: -
Type: Mandatory<pcr> Peak cell rate number
Valid values: 0 ~65535
Default value: -
Type: Mandatory<cvdt> Cell Delay Variation Tolerance
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory<scr> Sustained Cell rate
Valid values: 0 ~65535
Default value: -
Type: Mandatory<mbs> Maximum Burst Size
Valid values: 0 ~ 65535
Default value: -
Type: Mandatory
130 ATM Description Mode Commands
Chapter 12 Priority List Mode Commands
Chapter contentsPriority List Mode Commands ............................................................................................................................132
ds ..................................................................................................................................................................132
ds list ............................................................................................................................................................133dstip ..............................................................................................................................................................134
dstip list ........................................................................................................................................................135
dstmac ..........................................................................................................................................................135dstmac list .....................................................................................................................................................136
srcip ..............................................................................................................................................................136
srcip list ........................................................................................................................................................137srcmac ...........................................................................................................................................................137
srcmac list .....................................................................................................................................................138
tos .................................................................................................................................................................138tos list ...........................................................................................................................................................139
vlanid ............................................................................................................................................................139
vlanid list ......................................................................................................................................................140
131
12 • Priority List Mode Commands Model 3101RC Admin Reference Guide
Priority List Mode CommandsThe commands in this section can be executed only in the Priority List execution mode.
Note Priority List mode commands are executed with the (prio-conf)# prompt.
ds
Description: Set Differentiated Service of packets to remark VLAN priority / Show Differentiated Ser-vice priority list entry / Disable Differentiated Service priority list entry
Syntax: ds <number> prio <prio ID> {xdsl <port>/<pvc> | gigabit {<port> | la}} dscp <dscp> ds <number> list ds <number> disable
Parameter: Name Description
<number> Differentiated Service priority list number.
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<prio ID> Priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory<port> Port number
Valid values:1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1~ 12
Default value: -
Type: Mandatory
132 Priority List Mode Commands
Model 3101RC Admin Reference Guide 12 • Priority List Mode Commands
ds list
<dscp> Diffserv Code Points, which is a 6-bit number. The standardized combinations are listed below:
default / Default value (bits:000000)
af11 / Assured Forwarding Class 1:Low Drop (bits:001010)
af12 / Assured Forwarding Class 1:Medium Drop (bits:001100)
af13 / Assured Forwarding Class 1:High Drop (bits:001110)
af21 / Assured Forwarding Class 2:Low Drop (bits:010010)
af22 / Assured Forwarding Class 2:Medium Drop (bits:010100)
af23 / Assured Forwarding Class 2:High Drop (bits:010110)
af31 / Assured Forwarding Class 3:Low Drop (bits:011010)
af32 / Assured Forwarding Class 3:Medium Drop (bits:011100)
af33 / Assured Forwarding Class 3:High Drop (bits:011110)
af41 / Assured Forwarding Class 4:Low Drop (bits:100010)
af42 / Assured Forwarding Class 4:Medium Drop (bits:100100)
af43 / Assured Forwarding Class 4:High Drop (bits:100110)
ef / Expedited Forwarding (bits:101110)
Description: Show Differentiated Service priority listSyntax: ds listParameter: None
Priority List Mode Commands 133
12 • Priority List Mode Commands Model 3101RC Admin Reference Guide
dstip
Description: Specify dest IP address of packets to remark vlan priority / Show dest IP address priority list entry / Disable dest IP address priority list entry
Syntax: dstip <number> prio <prio ID> {xdsl <port>/<pvc> | gigabit {<port> | la}} ip <ipv4 address> <netmask> dstip <number> list dstip <number> disable
Parameter: Name Description
<number> Destination IP address priority list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<prio ID> Priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory<port> Port number
Valid values:1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1~ 12
Default value: -
Type: Mandatory<ipv4 address> Destination IP address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: 0.0.0.0
Type: Mandatory<netmask> Subnet mask
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Optional
134 Priority List Mode Commands
Model 3101RC Admin Reference Guide 12 • Priority List Mode Commands
dstip list
dstmac
Description: Show destination IP address priority listSyntax: dstip listParameter: None
Description: Specify dest MAC of packets to remark vlan priority / Show dest MAC priority list entry / Disable dest MAC priority list entry
Syntax: dstmac <number> prio <prio ID> {xdsl <port>/<pvc> | gigabit {<port> | la}} mac <mac address> dstmac <number> list dstmac <number> disable
Parameter: Name Description
<number> Destination MAC priority list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<prio ID> Priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory<port> Port number
Valid values:1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1~ 12
Default value: -
Type: Mandatory<mac address> MAC address
Valid values: xx:xx:xx:xx:xx:xx (xx:0~ff)
Default value: 00:00:00:00:00:00
Type: Mandatory
Priority List Mode Commands 135
12 • Priority List Mode Commands Model 3101RC Admin Reference Guide
dstmac list
srcip
Description: Show destination MAC priority listSyntax: dstmac listParameter: None
Description: Specify source IP address of packets to remark vlan prioritySyntax: srcip <number> prio <prio ID> {xdsl <port>/<pvc> | gigabit {<port> | la}} ip <ipv4
address> <netmask> srcip <number> list scrip <number> disable
Parameter: Name Description
<number> Source IP address priority list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<prio ID> Priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory<port> Port number
Valid values:1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1~ 12
Default value: -
Type: Mandatory<ipv4 address> Destination IP address
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: 0.0.0.0
Type: Mandatory
136 Priority List Mode Commands
Model 3101RC Admin Reference Guide 12 • Priority List Mode Commands
srcip list
srcmac
<netmask> Subnet mask
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Optional
Description: Show source IP address priority listSyntax: srcip listParameter: None
Description: Specify source MAC of packets to remark vlan prioritySyntax: srcmac <number> prio <prio ID> {xdsl <port>/<pvc> | gigabit {<port> | la}} mac
<mac address> scrmac <number> list scrmac <number> disable
Parameter: Name Description
<number> Source mac address priority list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<prio ID> Priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory<port> Port number
Valid values:1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1~ 12
Default value: -
Type: Mandatory
Priority List Mode Commands 137
12 • Priority List Mode Commands Model 3101RC Admin Reference Guide
srcmac list
tos
<mac address> MAC address
Valid values: xx:xx:xx:xx:xx:xx (xx:0~ff)
Default value: 00:00:00:00:00:00
Type: Mandatory
Description: Show source MAC priority listSyntax: srcmac listParameter: None
Description: Specify ToS (IP Precedence) of packets to remark vlan priority / Show ToS (IP Pre-cedence) priority list entry / Disable ToS (IP Precedence) priority list entry
Syntax: tos <number> prio <prio ID> {xdsl <port>/<pvc> | gigabit {<port> | la}} prece-dence <tos> tos <number> list tos <number> disable
Parameter: Name Description
<number> ToS (IP Precedence) priority list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<prio ID> Priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory<port> Port number
Valid values:1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1~ 12
Default value: -
Type: Mandatory
138 Priority List Mode Commands
Model 3101RC Admin Reference Guide 12 • Priority List Mode Commands
tos list
vlanid
<tos> Incoming Type of Service.
Valid values: 0~7
Default value: -
Type: Mandatory
Description: Show ToS (IP Precedence) priority listSyntax: tos listParameter: None
Description: Specify VLAN ID of packets to remark VLAN priority / Show VLAN id priority list entry / Disable VLAN id priority list entry
Syntax: vlanid <number> prio <prio ID> {xdsl <port>/<pvc> | gigabit {<port> | la}} vlan <VLAN ID> vlanid <number> list vlanid <number> disable
Parameter: Name Description
<number> Vlan id priority list number
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<prio ID> Priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory<port> Port number
Valid values:1~48 for xDSL, 1~2 for GBE
Default value: -
Type: Mandatory<pvc> PVC number
Valid values: 1~ 12
Default value: -
Type: Mandatory
Priority List Mode Commands 139
12 • Priority List Mode Commands Model 3101RC Admin Reference Guide
vlanid list
<VLAN ID> VLAN ID number
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: Show VLAN id priority listSyntax: vlanid listParameter: None
140 Priority List Mode Commands
Chapter 13 Alarm Profile Mode Commands
Chapter contentsAlarm Profile Mode Commands..........................................................................................................................142
alarm mask ....................................................................................................................................................142
alarm unmask ...............................................................................................................................................142alarm major ...................................................................................................................................................142
alarm minor ..................................................................................................................................................143
141
13 • Alarm Profile Mode Commands Model 3101RC Admin Reference Guide
Alarm Profile Mode CommandsThe commands in this section can be executed only in the Alarm Profile execution mode.
Note Alarm Profile mode commands are executed with the (alarm-profile-conf)# prompt.
alarm mask
alarm unmask
alarm major
Description: Mask the alarmSyntax: alarm mask <name>Parameter: Name Description
<name> Name of alarm
Valid values: Refer to Appendix B on page 167.
Default value: -
Type: Mandatory
Description: Unmask the alarmSyntax: alarm unmask <name>Parameter: Name Description
<name> Name of alarm
Valid values: Refer to Appendix B on page 167.
Default value: -
Type: Mandatory
Description: Set the level of the alarm to MajorSyntax: alarm major <name>Parameter: Name Description
<name> Name of alarm
Valid values: Refer to Appendix B on page 167.
Default value: -
Type: Mandatory
142 Alarm Profile Mode Commands
Model 3101RC Admin Reference Guide 13 • Alarm Profile Mode Commands
alarm minor
Description: Set the level of the alarm to MinorSyntax: alarm minor <name>Parameter: Name Description
<name> Name of alarm
Valid values: Refer to Appendix B on page 167.
Default value: -
Type: Mandatory
Alarm Profile Mode Commands 143
13 • Alarm Profile Mode Commands Model 3101RC Admin Reference Guide
144 Alarm Profile Mode Commands
Chapter 14 IGMP-ACL Profile Mode Commands
Chapter contentsIGMP-ACL Profile Mode Commands ................................................................................................................146
igmp-acl ........................................................................................................................................................146
igmp-acl rebind .............................................................................................................................................146
145
14 • IGMP-ACL Profile Mode Commands Model 3101RC Admin Reference Guide
IGMP-ACL Profile Mode CommandsThe commands in this section can be executed only in the IGMP-ACL Profile execution mode.
Note IGMP-ACL Profile mode commands are executed with the (igmpacl-profile-conf)# prompt.
igmp-acl
igmp-acl rebind
Description: IGMP group ACL Setting (IP and VLAN) / Delete channel settingSyntax: igmp-acl <number> {<ipv4 address> vlan <VLAN ID> | delete}Parameter: Name Description
<number> IGMP ACL channel index.
Valid values: 1 ~ 256
Default value: -
Type: Mandatory<ipv4 address> IGMP group address
Valid values: 224.0.0.0 ~ 239.255.255.255 The range of addresses from 224.0.0.0 to 224.0.0.255 is reserved for the use of routing protocols and other low-level topology dis-covery or maintenance protocols.
Default value: 0.0.0.0
Type: Mandatory<VLAN ID> VLAN ID
Valid values: 1 ~ 4094
Default value: -
Type: Mandatory
Description: IGMP ACL Profile rebindSyntax: igmp-acl rebindParameter: Name
146 IGMP-ACL Profile Mode Commands
Chapter 15 Service Profile Configure Mode Commands
Chapter contentsService Profile Configure Mode Commands........................................................................................................148
bitrate ...........................................................................................................................................................148
delay .............................................................................................................................................................148
l2-packet .......................................................................................................................................................148mode .............................................................................................................................................................149
noise .............................................................................................................................................................149
noisemargin ..................................................................................................................................................149ra-interval .....................................................................................................................................................149
service name ..................................................................................................................................................150
147
15 • Service Profile Configure Mode Commands Model 3101RC Admin Reference Guide
Service Profile Configure Mode CommandsThe commands in this section can be executed only in the Service Profile execution mode.
Note Service Profile mode commands are executed with the (service-profile-conf)# prompt.
bitrate
delay
l2-packet
Description: Set downstream/upstream Minimum/Maximum/Planned/L2 minimum bit rateSyntax: bitrate {ds | us} {min | max | planned | l2} <number>Parameter: Name Description
<number> Bit rate (kb/s).
Valid values: 0-65535
Default value: -
Type: Mandatory
Description: Set downstream/upstream delay introduced by the interleavingSyntax: delay {ds | us} <number>Parameter: Name Description
<number> Delay time (ms).
Valid values: 1 ~ 63
Default value: -
Type: Mandatory
Description: Set L2 Packet cellSyntax: l2-packet <number>Parameter: Name Description
<number> Set L2 Packet cell.
Valid values: 0 ~ 28
Default value: -
Type: Mandatory
148 Service Profile Configure Mode Commands
Model 3101RC Admin Reference Guide 15 • Service Profile Configure Mode Commands
mode
noise
noisemargin
ra-interval
Description: Set downstream/upstream rate adaptive mode to init (rate automatically elected at start up only and does not change after that), dynamic (rate automatically selected at initializa-tion and is continuously adapted during show time), or manual (rate changed manually)
Syntax: mode {ds | us} {init | dynamic | manual}Parameter: None
Description: Set downstream/upstream minimum impulse noise protectionSyntax: noise {ds | us} <number>Parameter: Name Description
<number> Noise (tenth symbols).
Valid values: 0~8 step 0.1
Default value: -
Type: Mandatory
Description: Set Downshift/Upshift Noise Margin in downstream/upstream directionSyntax: noisemargin {ds | us} {downshift | upshift} <number>Parameter: Name Description
<number> Downshift/Upshift Noise Margin (tenth symbols).
Valid values: 0~31 step 0.1
Default value: -
Type: Mandatory
Description: Set Downshift/Upshift Interval in downstream/upstream directionSyntax: ra-interval {ds | us} {downshift | upshift} <number>Parameter: Name Description
<number> Downshift/Upshift interval (seconds).
Valid values: 0 ~ 16383
Default value: 10
Type: Mandatory
Service Profile Configure Mode Commands 149
15 • Service Profile Configure Mode Commands Model 3101RC Admin Reference Guide
service name
Description: Set service profile nameSyntax: service name <string>Parameter: Name Description
<string> Profile name. (max 31 characters)
Default value: -
Type: Mandatory
150 Service Profile Configure Mode Commands
Chapter 16 Spectrum Profile Configure Mode Commands
Chapter contentsSpectrum Profile Configure Mode Commands....................................................................................................152
aggregate .......................................................................................................................................................152
bands ............................................................................................................................................................152
bands mask ...................................................................................................................................................153carriermask ...................................................................................................................................................153
modem features .............................................................................................................................................154
noisemargin ..................................................................................................................................................154opmode .........................................................................................................................................................154
pbomode .......................................................................................................................................................154
power-mgt disable .........................................................................................................................................155power-mgt l2 enable .....................................................................................................................................155
power-mgt l2_l3 enable ................................................................................................................................155
power-mgt l0-time ........................................................................................................................................155power-mgt l2-time ........................................................................................................................................156
power-mgt l2-atpr .........................................................................................................................................156
total power-mgt l2-atpr .................................................................................................................................156psdlevel .........................................................................................................................................................157
psdshape .......................................................................................................................................................157
rxaggregate ....................................................................................................................................................157spectrum name ..............................................................................................................................................158
status modify .................................................................................................................................................158
151
16 • Spectrum Profile Configure Mode Commands Model 3101RC Admin Reference Guide
Spectrum Profile Configure Mode CommandsThe commands in this section can be executed only in the Spectrum Profile execution mode.
Note Spectrum Profile mode commands are executed with the (spectrum-profile-conf)# prompt.
aggregate
bands
Description: Set downstream/upstream aggregate power levelSyntax: aggregate {ds | us} max powerlevel <number>Parameter: Name Description
<number> Power level (tenth dBm).
Valid values: 0~25.5 step 0.1
Default value: -
Type: Mandatory
Description: Set RF bandsSyntax: bands <index> {start | stop} <value>Parameter: Name Description
<index> Bands array index.
Valid values: 0~ 7
Default value: -
Type: Mandatory<value> Set start / stop frequency (kHz).
Valid values: 0~ 12000
Default value: -
Type: Mandatory
152 Spectrum Profile Configure Mode Commands
Model 3101RC Admin Reference Guide 16 • Spectrum Profile Configure Mode Commands
bands mask
carriermask
Description: Set bands maskSyntax: bands <index> mask <value>Parameter: Name Description
<index> Bands array index.
Valid values: 0~ 7
Default value: -
Type: Mandatory<value> Valid values:
egress_no_control egress_notched ingress_low ingress_weak ingress_strong rf_signal_am rf_signal_hamband
Default value: egress_no_control
Type: Mandatory
egress no control egress notched ingress low ingress weak ingress strong RF Signal AM Type RF Signal HAMBAND Type
Description: Set carrier maskSyntax: carriermask {ds | us} <index> <value>Parameter: Name Description
<index> Carrier mask array index.
Valid values: 0~ 63
Default value: -
Type: Mandatory<value> Carrier mask array value.
Valid values: 0x00~0xff (Hex)
Default value: -
Type: Mandatory
Spectrum Profile Configure Mode Commands 153
16 • Spectrum Profile Configure Mode Commands Model 3101RC Admin Reference Guide
modem features
noisemargin
opmode
pbomode
Description: Set modem features enable/disableSyntax: modem features {enable | disable}Parameter: None
Description: Set downstream/upstream maximum / minimum / target noise marginSyntax: noisemargin {ds | us} {max | min | target} <number>Parameter: Name Description
<number> Noise margin value.
Valid values: 0~31 (or 51.1 means no max noise margin is used) step 0.1.
Default value: -
Type: Mandatory
Description: Set Operational modeSyntax: opmode {set | clear} <opmode id>Parameter: Name Description
opmode id The ID of allowed ADSL modes of operation..
Valid values: Use ‘list opmode’ command to see all the operation modes.
Default value: -
Type: Mandatory
Description: Set power backoff operation mode ON/OFFSyntax: pbomode us {on | off}Parameter: None
154 Spectrum Profile Configure Mode Commands
Model 3101RC Admin Reference Guide 16 • Spectrum Profile Configure Mode Commands
power-mgt disable
power-mgt l2 enable
power-mgt l2_l3 enable
power-mgt l0-time
Description: Disable power management function for ADSLSyntax: power-mgt disableParameter: None
Description: Allow autonomous L2 state entry/exitSyntax: power-mgt l2 enableParameter: None
Description: Allow autonomous L2 and L3 state entry/exitSyntax: power-mgt l2_l3 enableParameter: None
Description: Set the minimum time (in seconds) between Exit from L2 low power state and the next Entry into the L2 low power state
Syntax: power-mgt l0-time <number>Parameter: Name Description
<number> L0 Time value
Valid values: 0 ~ 255 (sec)
Default value: -
Type: Mandatory
Spectrum Profile Configure Mode Commands 155
16 • Spectrum Profile Configure Mode Commands Model 3101RC Admin Reference Guide
power-mgt l2-time
power-mgt l2-atpr
total power-mgt l2-atpr
Description: Set minimum time (in seconds) between an Entry into L2 low power state and the first L2 low power trim request, and between two consecutive L2 power trim requests
Syntax: power-mgt l2-time <number>Parameter: Name Description
<number> L2 Time value.
Valid values: 0 ~ 255 (sec)
Default value: -
Type: Mandatory
Description: Set maximum aggregate transmit power reduction (in dB) that is allowed at transition of L0 to L2 state or an L2 low power trim request
Syntax: power-mgt l2-atpr <number>Parameter: Name Description
<number> L2 power reduction range value.
Valid values: 0 ~ 31 (dB)
Default value: -
Type: Mandatory
Description: Set total maximum aggregate transmit power reduction (in dB) that is allowed in the L2 state; the total reduction is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and L2 power trims
Syntax: power-mgt l2-atpr <number>Parameter: Name Description
<number> L2 total power reduction range value.
Valid values: 0 ~ 31 (dB)
Default value: -
Type: Mandatory
156 Spectrum Profile Configure Mode Commands
Model 3101RC Admin Reference Guide 16 • Spectrum Profile Configure Mode Commands
psdlevel
psdshape
rxaggregate
Description: Set PSD levelSyntax: psdlevel {ds | us} max <number>Parameter: Name Description
<number> Maximum PSD level (tenth dBm/Hz).
Valid values:
-60 ~ -40 downstream step 0.1 -60 ~ -38 upstream. step 0.1
Default value: -
Type: Mandatory
Description: Set PSD shapeSyntax: psdshape ds {cut-off <number> | standard}Parameter: Name Description
<number> Cut-off frequencies at carrier.
Valid values: 100-280 step 10
Default value: -
Type: Mandatory
Description: Set maximum aggregate receive power levelSyntax: rxaggregate us max powerlevel <number>Parameter: Name Description
<number> Maximum aggregate receive power level (-255~255 tenth dBm).
Valid values: -25.5~25.5 step 0.1
Default value: -
Type: Mandatory
Spectrum Profile Configure Mode Commands 157
16 • Spectrum Profile Configure Mode Commands Model 3101RC Admin Reference Guide
spectrum name
status modify
Description: Set spectrum profile nameSyntax: spectrum name <string>Parameter: Name Description
<string> Name of the spectrum profile. (max 31 characters)
Default value: -
Type: Mandatory
Description: Set the status of modificationSyntax: status modify completeParameter: None
158 Spectrum Profile Configure Mode Commands
Chapter 17 TCA Profile Mode Commands
Chapter contentsTCA Profile Configure Mode Commands...........................................................................................................160
adsl-tca day ...................................................................................................................................................160
adsl-tca disable ..............................................................................................................................................160adsl-tca enable ...............................................................................................................................................160
adsl-tca interval .............................................................................................................................................160
159
17 • TCA Profile Mode Commands Model 3101RC Admin Reference Guide
TCA Profile Configure Mode CommandsThe commands in this section can be executed only in the TCA Profile execution mode.
Note TCA Profile mode commands are executed with the (tca-profile-conf)# prompt.
adsl-tca day
adsl-tca disable
adsl-tca enable
adsl-tca interval
Description: Set threshold value for near-end/far-end day PMSyntax: adsl-tca day {ne | fe} {es | ses | uas} <number>Parameter: Name Description
<number> Threshold value.
Valid values: 0-86400
Default value: -
Type: Mandatory
Description: Disable TCASyntax: adsl-tca disableParameter: None
Description: Enable TCASyntax: adsl-tca enableParameter: None
Description: Set threshold value for near-end/far-end interval PMSyntax: adsl-tca interval {ne | fe} {es | ses | uas} <number>Parameter: Name Description
<number> Threshold value.
Valid values: 0-900
Default value: -
Type: Mandatory
160 TCA Profile Configure Mode Commands
Chapter 18 Contacting Patton for assistance
Chapter contentsIntroduction........................................................................................................................................................162
Contact information............................................................................................................................................162
Warranty Service and Returned Merchandise Authorizations (RMAs).................................................................162Warranty coverage ........................................................................................................................................162
Out-of-warranty service ...........................................................................................................................162
Returns for credit ....................................................................................................................................162Return for credit policy ...........................................................................................................................163
RMA numbers ..............................................................................................................................................163
Shipping instructions ..............................................................................................................................163
161
18 • Contacting Patton for assistance Model 3101RC Admin Reference Guide
IntroductionThis chapter contains the following information:
• “Contact information”—describes how to contact PATTON technical support for assistance.
• “Warranty Service and Returned Merchandise Authorizations (RMAs)”—contains information about the RAS warranty and obtaining a return merchandise authorization (RMA).
Contact informationPatton Electronics offers a wide array of free technical services. If you have questions about any of our other products we recommend you begin your search for answers by using our technical knowledge base. Here, we have gathered together many of the more commonly asked questions and compiled them into a searchable database to help you quickly solve your problems.
• Online support—available at www.patton.com.
• E-mail support—e-mail sent to [email protected] will be answered within 1 business day
• Telephone support—standard telephone support is available Monday through Friday, from 8:00 A.M. to 5:00 P.M. EST (8:00 to 17:00 UTC-5), Monday through Friday by calling +1 (301) 975-1007
Warranty Service and Returned Merchandise Authorizations (RMAs)Patton Electronics is an ISO-9001 certified manufacturer and our products are carefully tested before ship-ment. All of our products are backed by a comprehensive warranty program.
Note If you purchased your equipment from a Patton Electronics reseller, ask your reseller how you should proceed with warranty service. It is often more convenient for you to work with your local reseller to obtain a replacement. Patton services our products no matter how you acquired them.
Warranty coverageOur products are under warranty to be free from defects, and we will, at our option, repair or replace the prod-uct should it fail within one year from the first date of shipment. Our warranty is limited to defects in work-manship or materials, and does not cover customer damage, lightning or power surge damage, abuse, or unauthorized modification.
Out-of-warranty servicePatton services what we sell, no matter how you acquired it, including malfunctioning products that are no longer under warranty. Our products have a flat fee for repairs. Units damaged by lightning or other catastro-phes may require replacement.
Returns for creditCustomer satisfaction is important to us, therefore any product may be returned with authorization within 30 days from the shipment date for a full credit of the purchase price. If you have ordered the wrong equipment or you are dissatisfied in any way, please contact us to request an RMA number to accept your return. Patton is not responsible for equipment returned without a Return Authorization.
162 Introduction
Model 3101RC Admin Reference Guide 18 • Contacting Patton for assistance
Return for credit policy • Less than 30 days: No Charge. Your credit will be issued upon receipt and inspection of the equipment.
• 30 to 60 days: We will add a 20% restocking charge (crediting your account with 80% of the purchase price).
• Over 60 days: Products will be accepted for repairs only.
RMA numbersRMA numbers are required for all product returns. You can obtain an RMA by doing one of the following:
• Completing a request on the RMA Request page in the Support section at www.patton.com
• By calling +1 (301) 975-1000 and speaking to a Technical Support Engineer
• By sending an e-mail to [email protected]
All returned units must have the RMA number clearly visible on the outside of the shipping container. Please use the original packing material that the device came in or pack the unit securely to avoid damage during shipping.
Shipping instructionsThe RMA number should be clearly visible on the address label. Our shipping address is as follows:
Patton Electronics Company RMA#: xxxx 7622 Rickenbacker Dr. Gaithersburg, MD 20879-4773 USA
Patton will ship the equipment back to you in the same manner you ship it to us. Patton will pay the return shipping costs.
Warranty Service and Returned Merchandise Authorizations (RMAs) 163
18 • Contacting Patton for assistance Model 3101RC Admin Reference Guide
164 Warranty Service and Returned Merchandise Authorizations (RMAs)
Appendix A ADSL Operational Mask Table
Chapter contentsADSL Operational Mask Table ...........................................................................................................................166
165
A • ADSL Operational Mask Table Model 3101RC Admin Reference Guide
ADSL Operational Mask Table
Table 5. ADSL Operational Mask
Bit Description Bit Description
0 ANSI_T1.413 32 992_4_I_AllDigital_NonOverlapped
1 ETSI_DTS_TM06006 33 992_4_I_AllDigital_Overlapped
2 992_1_A_Pots_NonOverlapped 34 992_3_L_Pots_NonOverlapped_Mode1
3 992_1_A_Pots_Overlapped 35 992_3_L_Pots_NonOverlapped_Mode2
4 992_1_B_Isdn_NonOverlapped 36 992_3_L_Pots_Overlapped_Mode3
5 992_1_B_Isdn_Overlapped 37 992_3_L_Pots_Overlapped_Mode4
6 992_1_C_TcmIsdn_NonOverlapped 38 992_3_M_Pots_Extend_US_Overlapped
7 992_1_C_TcmIsdn_Overlapped 39 992_3_M_Pots_Extend_US_NonOverlapped
8 992_2_A_Pots_NonOverlapped 40 992_5_A_Pots_NonOverlapped
9 992_2_B_Pots_Overlapped 41 992_5_A_Pots_Overlapped
10 992_2_C_TcmIsdn_NonOverlapped 42 992_5_B_Isdn_NonOverlapped
11 992_2_C_TcmIsdn_Overlapped 43 992_5_B_Isdn_Overlapped
18 992_3_A_Pots_NonOverlapped 46 992_5_I_AllDigital_NonOverlapped
19 992_3_A_Pots_Overlapped 47 992_5_I_AllDigital_Overlapped
20 992_3_B_Isdn_NonOverlapped 48 ANSI_T1.424
21 992_3_B_Isdn_Overlapped 49 ETSI_TS_101_270
24 992_4_A_Pots_NonOverlapped 50 993_1
25 992_4_A_Pots_Overlapped 51 IEEE_8023ah
28 992_3_I_AllDigital_NonOverlapped 56 992_5_J_AllDigital_NonOverlapped
29 992_3_I_AllDigital_Overlapped 57 992_5_J_AllDigital_Overlapped
30 992_3_J_AllDigital_NonOverlapped 58 992_5_M_Pots_Extend_US_NonOverlapped
31 992_3_J_AllDigital_Overlapped 59 992_5_M_Pots_Extend_US_Overlapped
166 ADSL Operational Mask Table
Appendix B Alarm Table
Chapter contentsAlarm Table ........................................................................................................................................................168
167
B • Alarm Table Model 3101RC Admin Reference Guide
Alarm Table
Table 6. Alarm Table
Alarm ID Name Description
105 alm_self_test_fail System Self Test Fail
106 alm_above_temper System Above Temperature
107 alm_below_temper System Below Temperature
111 alm_power_fail_0 System Power Fail 0
114 alm_card_unequip System TM Card Unequipment
116 alm_gbe1_fiber_los System GBE1 Fiber LOS
117 alm_gbe2_fiber_los System GBE2 Fiber LOS
601 alm_adsl_los Near-end Loss of Signal
602 alm_adsl_lof Near-end Loss of Frame
603 alm_adsl_lom Near-end Loss of Margin
610 alm_adsl_lcd Near-end Loss Cell Delineation
612 alm_adsl_ncd Near-end No Cell Delineation
613 alm_adsl_los_fe Far-end Loss of Signal
614 alm_adsl_lof_fe Far-end Loss of Frame
615 alm_adsl_lom_fe Far-end Loss of Margin
616 alm_adsl_lopwr_fe Far-end Loss of Power
619 alm_adsl_commf_fe Far-end Communication Failure
620 alm_adsl_nopeer_fe Far-end No Peer Present
622 alm_adsl_lcd_fe Far-end Loss Cell Delineation
624 alm_adsl_ncd_fe Far-end No Cell Delineation
168 Alarm Table
