Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
● There are times when we may change the content of the catalogue without warning ● There are times when printed photographs may differ from the retailer's actual specifications ● Photographs shown above have been taken in poses for use in this catalogue. When exiting machinery, please ensure that operational equipment is always grounded, and that every effort has been made to ensure safety ● There are times when the color of catalogue photographs may, as a result of the printing process, differ from the actual color ● Please always ensure that you have read the instruction manual before operating this vehicle ● A special license (Certification of the completion of a vehicle type construction machinery skilled operator's course) is required to operate construction machinery in excess of 3 tons ● Operation of specified cranes requires completion of a vehicle type construction machinery skilled operator's course, or completion of a small size mobile crane skilled operator's course
MINIMUM SWING RADIUS
75X.02T.01 Printed in japan
● There are times when we may change the content of the catalogue without warning ● There are times when printed photographs may differ from the retailer's actual specifications ● Photographs shown above have been taken in poses for use in this catalogue. When exiting machinery, please ensure that operational equipment is always grounded, and that every effort has been made to ensure safety ● There are times when the color of catalogue photographs may, as a result of the printing process, differ from the actual color ● Please always ensure that you have read the instruction manual before operating this vehicle ● A special license (Certification of the completion of a vehicle type construction machinery skilled operator's course) is required to operate construction machinery in excess of 3 tons ● Operation of specified cranes requires completion of a vehicle type construction machinery skilled operator's course, or completion of a small size mobile crane skilled operator's course
MINIMUM SWING RADIUS
75X.02T.01 Printed in japan
MADE IN JAPAN The world knows that Japanese design and manufacturing is the best especially for industrial products. The hydraulic excavator is
not the exception when a total integration concept is required in design work involving key components, manufacturing engineer-
ing and product quality assurance in the factory.
All SUMITOMO hydraulic excavators are engineered and assembled in SUMITOMO's its one and only factory located in Chiba
City, Japan, and distributed to each country in the world. This distinctive feature is unique to SUMITOMO, giving the SUMITOMO
machine users total comfort and reliance on product quality.
(Note: Some of the items manufactured and sourced in other countries may be assembled in Japan.)
1 2
3020mm190mm 75mm2320mm
1785mm(SH60-2:1750mm)
1235mm(SH60-2:1750mm)
515mmSH60-2
kN57kN57 kN39kN39
In addition to boasting top-class compact rotational capability for cramped areas, outstanding stability, and powerful digging and drive strength have been realized. On various kinds of work-sites it can always be trusted to perform and maneuver exactly as the operator intends.
Minimum Swing Radius
Rotational ABSA rotation shock-absorber device has been installed to soften jolts that occur when the vehicle halts rotation. This is particularly useful for pinpointing position, and preventing spillages during manual operation.
Employment of speed assisted mechanicsThrough employing an oil return system in the arm and boom, speed assisted operations for digging, as well as fuel consumption, have been improved.
Diversified operational fieldRoad works Forest road works Demolition works
Clearing the Non-road Special MotorVehicle Exhaust Emission Standard
● Turbo engine with intercoolerAir intake efficiency is improved by the intercooler.
It cools air taken in, which has been heated by the
compression of the turbo charger. In addition to a
great reduction of NOx and PM, high output and
improved fuel consumption have been realized.
Suction
Cooled condensed air (flows to the engine)
External air
Suction ExhaustCompressed
hot air Turbo charger
Engine
Intercooler
Radiator
Precision movement and secure operational control, “front and back”, with a rounded body-form that minimizes excess width
Track widthExcess cab width Excess rear width
Width
Excess of full rear swing width
Minimum front swing radius
Bucket digging capacity
● Arm digging capacity
●
Tail swingradius
● Cooled EGR systemExhaust gas is re-circulated and combustion
temperature lowered by the EGR (Exhaust Gas
Recirculation) engine. In addition, a water-cooled
EGR system has been employed, which further
efficiently reduces NOx (nitrogen oxide).
Cooled water release Cooled water intake
Piston
Connecting rod
system EGR valve
Control unitPartial utilization
of exhaust
Exhaust
EGRcooler
3 4
Double element air cleaner
Condenser
Battery (maintenance free)
Reserve tank
1
2
3
4
1
1
2
2
3
3
4
Water separator
Fuel filter
Oil filter
1
2
3
Ease of cleaning aroundradiator
Diverse innovations designed to reduce running costs and make maintenance easy. In terms of both cost and labor, you will really come to appreciate its efficiency the longer you use it.
Maintenance
High-Performance Return Filter
The hydraulic oil change interval is 5,000 hours, and the return filter change interval is 2,000 hours. One high performance return filter keeps the same level of filtering effect as a nephron.
Ground Level Access
Various parts of the excavator can now be cleaned and changed from ground level without climbing onto the body of the vehicle. Maintenance is no longer troublesome.
●Fuel and oil filters The fuel and oil filters are installed in positions that can be accessed from ground level, so replacing them is made simple.
Engine Oil Drain Coupler
The engine oil pan is provided with a drain coupler. This makes it easier to do drain work and prevents oil from spattering because of the attached drain hose.
EMS (Easy Maintenance System) as Standard
SUMITOMO's new improved EMS keeps the pins and bushes fully lubri-cated at all times and prevents rattling. This system significantly extends the service life of the pins and bushes.
The interval of greasing around the bucket is 250 hours, and the interval for the other sections is 1,000 hours, keeping the joints lubricated for a long time and extending the service life of parts by reducing abrasion and rattling.
5 6
●Hydraulic • oil change:5,000 hours
●Life of filter:2,000 hours※The oil and filter change interval depends on the working conditions.
●Greasing interval for other sections:1,000 hours
■EMS bushing
A solid lubricant embedded in high strength brass forms a layer on the bushing surface to prevent contact between metals, maintaining an excellent lubricated state to reduce the abrasion of joints.
The surface of the pin is plated to increase the surface hardness and to improve the wear resistance accordingly.
Special bushing
Dust seal
Plated pin
Solid lubricant
High-strength brass
※The greasing interval depends on the working conditions.
●Bucket greasing interval :250 hours
① ② ③ ④
Sections equipped with EMS bushing
Precautionary use of EMSGrease is enclosed, however, greasing is necessary every 1000 hours or six months depending on the level of dusting conditions.Greasing is also necessary after any components have been submerged underwater for prolonged periods.Greasing is also recommended after use with hydraulic breakers, crushers or other high impact attachments such as rock saws etc. Bucket pins should be cleaned thoroughly when removing or attaching new buckets.
Oil coolerOil cooler
Inter-coolerInter-cooler
RadiatorRadiator
The High-Performance Return Filter is made more precisely to condense the Nephron filter function.
Conventional return filter High-performance return filter
120mmSeat slide range
120mm
120mm
Operation-consoleslide range
120mm
Total slide range
Seat slide range
Operation-consoleslide range
Total slide range
240mm240mm
Travel pedals are optional equipment
How safely, and in what level of comfort can the driver carry out daily operations?We have extended every possible care and attention to ensure that both safety and comfort are provided.
Operator Comfort and Safety
Comfortable and spacious cab
Spacious foot space
Slide-door windows
Emergency escape hammer Reversing rear-view mirror Cab roof window Membrane switch Emergency stop switch Defroster/Cup holder
Stereo speakersAM/FM radio
Full operation-console slide adjustment (Reclining seat)
Gate-type lock lever on the operation lever to prevent operational errors
Air conditioner installed as standard
An air conditioner is fitted as standard. Front facing airflow vents and a defrosting function allow a pleasant work environment to be maintained.
Employment of fluid-mount suspension to reduce fatigue
Impacts and vibrations on the cab are effectively absorbed, providing a pleasant and comfortable ride, as well as reducing noise levels inside the cab. Operator fatigue is reduced.
Floor design allows easy access to and from cab
7 8
Silicon oil
9 10
B
LK
DE
A
I
CB
J
Q
G
H
F
N
O M
A
C
F G
H
I
D
E P R
■Working Range ■Dimensions
BLADE : UP ARM : STD ARM SHOE : 450G BUCKET : 0.28BUCKET
ARM LENGTH = 1.71 (m) MAXIMUM REACH = 5.52 (m) TIPPING CAPACITY (MARK: ) = 75.0 (%) HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)
5m
4m
3m
2m
1m
0
-1m
-2m
-3m
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
1610*
1610*
1490
1340
1250
1120
1130
1010
1080
970
1100
980
1210
1070
1470
1300
2200*
1960
4.07
4.07
4.8
4.8
5.25
5.25
5.47
5.47
5.51
5.51
5.36
5.36
5.01
5.01
4.4
4.4
3.41
3.41
1360
1220
1320
1180
1270
1130
1230
1090
1210
1070
1670*
1670*
1700*
1700*
1900*
1790
1900
1690
1800
1600
1730
1530
1690
1490
1690
1490
1600*
1600*
1770*
1770*
2230*
2230*
2860*
2670
2840
2470
2720
2360
2670
2320
2680
2330
2550*
2390
2990*
2990*
2490*
2490*
3910*
3910*
4560*
4560*
3520*
3520*
Radius of Load
Max.Radius
1590*
1590*
1810*
1810*
4180*
4180*
4260*
4260*
2420*
2420*
1990*
1990*
2690*
2640*
4110*
4000*
3880*
3880*
2.88
2.88
2.56
2.56
1.39
1.39
2.11
2.11
2.2
2.2
1.78
1.78
1.11
0.98
1.11
0.99
1.72
1.72
Min.Radius
BucketHook
Height 5m 4m 3m 2m
BLADE : DOWN ARM : STD ARM SHOE : 450G BUCKET : 0.28BUCKET
ARM LENGTH = 1.71 (m) MAXIMUM REACH = 5.52 (m) TIPPING CAPACITY (MARK: ) = 75.0 (%) HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)
5m
4m
3m
2m
1m
0
-1m
-2m
-3m
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
1610*
1610*
1560*
1340
1600*
1120
1710*
1010
1830*
970
1920*
980
2020*
1070
2120*
1300
2200*
1960
4.07
4.07
4.8
4.8
5.25
5.25
5.47
5.47
5.51
5.51
5.36
5.36
5.01
5.01
4.4
4.4
3.41
3.41
1730*
1220
1860*
1180
1990*
1130
2070*
1090
2020*
1070
1670*
1670*
1700*
1700*
1900*
1790
2190*
1690
2460*
1600
2630*
1530
2630*
1490
2410*
1490
1600*
1600*
1770*
1770*
2230*
2230*
2860*
2670
3400*
2470
3620*
2360
3570*
2320
3250*
2330
2550*
2390
2990*
2990*
2490*
2490*
3910*
3910*
4560*
4560*
3520*
3520*
Radius of Load
Max.Radius
1590*
1590*
1810*
1810*
3180*
4180*
4260*
4260*
2420*
2420*
2140*
1990*
3590*
2640*
4810*
4000*
3700*
3880*
2.88
2.88
2.56
2.56
1.86
1.39
2.11
2.11
2.2
2.2
1.86
1.78
1.86
0.98
1.86
0.99
1.86
1.72
Min.Radius
BucketHook
Height 5m 4m 3m 2m
BLADE : UP ARM : LONG ARM SHOE : 450G BUCKET : 0.22BUCKET
ARM LENGTH = 2.12 (m) MAXIMUM REACH = 5.92 (m) TIPPING CAPACITY (MARK: ) = 75.0 (%) HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)
5m
4m
3m
2m
1m
0
-1m
-2m
-3m
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
1390*
1390*
1290
1160
1100
990
1000
900
960
860
970
870
1050
930
1230
1090
1680
1480
4.59
4.59
5.25
5.25
5.66
5.66
5.87
5.87
5.91
5.91
5.77
5.77
5.44
5.44
4.89
4.89
4.03
4.03
1420
1280
1380
1240
1330
1190
1270
1130
1220
1090
1190
1060
1430*
1430*
1490*
1490*
1700*
1700*
1930
1720
1810
1610
1730
1530
1670
1480
1660
1460
1690
1490
1920*
1920*
2560*
2560*
2880
2510
2730
2370
2650
2300
2640
2290
2680
2330
2570*
2570*
3540*
3540*
4930*
4770
4070*
4070*
Radius of Load
Max.Radius
1350*
1350*
1470*
1470*
2270*
2270*
3920*
3920*
3000*
3000*
1900*
1900*
2290*
2210*
3450*
3340*
4930*
4930*
3.29
3.29
3.03
3.03
2.08
2.08
2.03
2.03
2.13
2.13
1.69
1.69
1.11
0.98
1.11
0.98
1.11
1.11
Min.Radius
BucketHook
Height 5m 4m 3m 2m
BLADE : DOWN ARM : LONG ARM SHOE : 450G BUCKET : 0.22BUCKET
ARM LENGTH = 2.12 (m) MAXIMUM REACH = 5.92 (m) TIPPING CAPACITY (MARK: ) = 75.0 (%) HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)
5m
4m
3m
2m
1m
0
-1m
-2m
-3m
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
We
Ws
1390*
1390*
1350*
1160
1370*
990
1450*
900
1590*
860
1740*
870
1830*
930
1940*
1090
2040*
1480
4.59
4.59
5.25
5.25
5.66
5.66
5.87
5.87
5.91
5.91
5.77
5.77
5.44
5.44
4.89
4.89
4.03
4.03
1500*
1280
1590*
1240
1740*
1190
1900*
1130
2020*
1090
2040*
1060
1430*
1430*
1490*
1490*
1700*
1700*
2010*
1720
2330*
1610
2550*
1530
2620*
1480
2500*
1460
2060*
1490
1920*
1920*
2560*
2560*
3180*
2510
3530*
2370
3590*
2300
3390*
2290
2880*
2330
2570*
2570*
3540*
3540*
4930*
4770
4070*
4070*
Radius of Load
Max.Radius
1350*
1350*
1470*
1470*
2270*
2270*
3920*
3920*
3000*
3000*
2220*
1900*
3230*
2210*
4610*
3340*
4310*
4930*
3.29
3.29
3.03
3.03
2.08
2.08
2.03
2.03
2.13
2.13
1.86
1.69
1.86
0.98
1.86
0.98
1.86
1.11
Min.Radius
BucketHook
Height 5m 4m 3m 2m
■Lifting Capacity
SH75X-3B
1.71m
6520mm
4140mm
7330mm
5250mm
3640mm
1785mm
1235mm
415mm
205mm
2.12m
6900mm
4540mm
7620mm
5540mm
4100mm
2085mm
SH75X-3B
STD Specifications
1.71m
0.28m3
7920kg
ISUZU AU-4LE2X
40.0kw/2000min-1
2179ml(cc)
2 variable displacement axial piston pumps
29.4Mpa
Variable displacement axial piston motor
Mechanical disc brake
Fixed displacement axial piston motor
5.1/3.3km/h
59kN
70% <35°>
35kPa
9.5min-1
57kN
38kN
100liter
97liter
0.11m3
0.10m3
STD
3
-
370mm
136kg
◎
◎
0.17m3
0.15m3
STD
3
-
480mm
161kg
◎
◎
0.22m3
0.19m3
STD
4
673mm
600mm
178kg
◎
●
0.28m3
0.24m3
STD
4
804mm
730mm
204kg
●
△
0.34m3
0.30m3
STD
4
945mm
865mm
227kg
○
×
Max. digging radius
Max. digging depth
Max. digging height
Max. dumping height
Max. vertical wall cut depth
Min. front swing radius
Rear end swing radius
Max. lift above ground
Min. drop below ground
A
B
C
D
E
F
G
H
I
Arm length
■Working Range SH75X-3B
1.71m
5915mm
4492mm
2900mm
1425mm
2210mm
2845mm
745mm
20mm
2700mm
2225mm
1065mm
1160mm
1870mm
2320mm
2470mm
450mm
360mm
2320mm
450mm
2.12m
5910mm
4487mm
2950mm
Overall length
Length from center of machine (to arm top)
Length from center of machine (to shoe top)
Center to center of wheels
Overall track length
Overall height
Clearance height under upper structure
Shoe lug height
Cab height
Upper structure overall width
Width from center of machine (left side)
Width from center of machine (right side)
Track gauge
Overall track width with 450mm
600mm
Std. Shoe width
Minimum ground clearance
Width of blade
Height of blade
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
Arm length
■Dimensions
With side cutter
Without side cutter
1.71m arm
2.12m arm
■Bucket
◎:Suitable for materials with density up to 2000kg/m3 or less●:Standard bucket (Suitable for materials with density up to 1800kg/m3 or less)○:Suitable for materials with density up to 1600kg/m3 or less△:Suitable for materials with density up to 1200kg/m3 or less×:Not available
Bucket capacity (ISO/SAE/PCSA heaped)
Bucket capacity (CECE heaped)
Bucket type
No. of tooth
Width
Weight
Engine
Hydraulic
System
Performance
Others
■Principal specifications
Arm length
Bucket capacity (ISO heaped)
Std. Operating weight
Make & model
Rated output
Displacement
Main pump
Max pressure
Travel motor
Parking brake type
Swing motor
Travel speed
Drawbar pull
Grade ability
Ground pressure
Swing speed
Bucket
Arm
Fuel tank
Hydraulic fluid tank
■Weight & Ground pressure
Shoe type
Triple grouser shoe
Shoe width
450mm
600mm
Overall width
2320mm
2470mm
Operating weight
7920kg
8030kg
Ground pressure
35kPa
27kPa
SH75X-3BModel
SH75X-3BModel
■Standard equipment
・Quick change 4way (Kit)・Travel pedal
■Optional equipment
●Hydraulics system・High-performance return filter・One-touch idle・Changeable 2-speed-travel・Rotational ABS●Safety equipment・Rear-view mirror・Gate lock lever・Emergency escape hammer・Seat belt・Cab-top headlight
・Travel alarm・Theft prevention dog-chain・Boom holding valve・Engine emergency stop
switch●Cab/interior equipment・KAB seat・Large-size rounded cab・Fluid mount ・Air conditioner・Defroster
・Automatic lock for front facing window・Automatic point wiper
connecter・Intermittent wiper with washer・Reclining seat・Cup holder・Ashtray・Room lamp・Hat hook・AM/FM Radio
●Others・Engine that complies with
tear-3 exhaust emissions regulations
・EMS (Easy Maintenance System)
・Long life hydraulic fluid・Front-face protective net for
radiator・Aluminum radiator・Aluminum oil cooler
・Tool kit・Grease gun・Fuel filter・Double-element air cleaner
WE : OVER END WS : OVER SIDE WE : OVER END WS : OVER SIDE
WE : OVER END WS : OVER SIDE WE : OVER END WS : OVER SIDE