Embed Size (px)
Citation preview
Compact development system rich with on-board peripherals for all-round
multimedia development on CY8C5868AXI-LP035 device.
for PSoC®5LPmikromedia™
PSoC
I want to express my thanks to you for being interested in our products and for having
confidence in MikroElektronika.
The primary aim of our company is to design and produce high quality electronic products
and to constantly improve the performance thereof in order to better suit your needs.
The PSoC® and Windows® logos and product names are trademarks of Cypress® and Microsoft® in the U.S.A. and other countries.
TO OUR VALUED CUSTOMERS
Nebojsa Matic
General Manager
Page 3
Introduction to mikromedia for PSoC® 5LP 4
Package Contains 5
Key Features 6
System Specification 7
1. Power supply 8
Battery power supply 8
USB power supply 8
2. CY8C5868AXI-LP035 microcontroller 10
Key microcontroller features 10
3. Programming the microcontroller 11
Programming with PSoC® Bootloader 12
PSoC® Creator™ Installation Wizard 13
PSoC® Programmer™ Installation wizard 14
PSoC® bootloader quick guide 15
Programming with mikroProg™ 16
4. Reset Button 18
5. Crystal oscillator 20
6. microSD Card Slot 22
7. Touch Screen 24
8. Audio Module 26
9. USB connection 28
10. Accelerometer 30
11. FRAM 32
12. Pads 34
13. Pinout 35
14. Dimensions 36
15. mikromedia accessories 37
Notes 38
Disclaimer 39
Table of Contents
Page 4
Introduction to mikromedia for PSoC® 5LP
The mikromedia for PSoC® 5LP is a compact
development system with lots of on-board
peripherals which allow development of devices
with multimedia content. The central part of
the system is a 32-bit CY8C5868AXI-LP035
microcontroller. The mikromedia for PSoC® 5LP
features integrated modules such as stereo
MP3 codec, 320x240 TFT touch screen
display, accelerometer, USB connector, audio
connector, MMC/SD card slot, 2Mbit FRAM, two
1x26 connection pads and other. It comes pre-
programmed with a USB HID PSoC® bootloader, but can also be programmed with external
programmers, such as mikroProg™ for PSoC® 5LP
or other external programmers. Mikromedia is
compact and slim which makes it a convenient
platform for mobile devices.
Page 5
Package Contains
01 02
04 05
03
06
Damage resistant
protective box
mikromedia for PSoC® 5LP
development board
mikromedia for PSoC® 5LP
user’s guideUSB cablemikromedia™ for PSoC® 5LP
schematics and pinout
Two 1x26 male headers
and one 2x5 male headers
Page 6
Key Features
16
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Connection Pads
TFT display 320x240px
USB MINI-B connector
CHARGE indicator LED
Li-Polymer battery connector
3.5mm headphone connector
Power supply regulator
FRAM
RESET button
VS1053 Stereo mp3 coder/decoder
CY8C5868AXI-LP035 microcontroller
Accelerometer
Crystal oscillator
Power indication LED
microSD Card Slot
mikroProg connector
Cortex Debug connector17
01
02
09
Page 7
03
06
07
08
11
10
12
13
14
15
16
04 05
17
System Specification
power supplyVia USB cable (5V DC)
board dimensions81.2 x 60.5 mm (3.19 x 2.38 inch)
weight~50g (0.11lbs)
power consumption46 mA with erased MCU (when on-board modules are inactive)
Page 8
1. Power supply
You can power the board using the MINI-B USB cable which comes in the package.
On-board voltage regulators provide
the appropriate voltage levels to each
component on the board. Power LED (GREEN) will indicate the presence of
power supply.
You can also power the board using a Li-Polymer battery, via on-board battery connector. On-board battery
charger circuit MCP73832 enables you to charge the
battery over USB connection. LED diode (RED) will
indicate when the battery is charging. Charging current
is ~250mA and charging voltage is 4.2V DC.
Battery power supply
USB power supply
Figure 1-1: Connecting USB power supply
Figure 1-2: Connecting Li-Polymer battery
Page 9
VCC-SYS VCC-3.3V
E910uF
E1010uF
R472K2
VCC-BAT
D1PMEG3010ER
R463K9
Charging Current approx. 250mA
R374K7
VCC-3.3V
E7 10uF C41
2.2uF
R35100K
R31100K
VCC-BAT
VSENSE
VCC-SYS
VCC-SYS
VCC-BAT
VCC-USB
R34
10K
R43
10K
R3910K
VCC-3.3V
BAT-STAT
R42
10K
R411K
VCC-3.3V
E810uF
R3810K
VCC-3.3V
R33100K
3
12GND
Vin
Vout
REG1
LD29080DT33
VCC-BAT
123 4
5STATVSSVBAT VDD
PROG
U6
MCP73832
CN4
BATTCONN
LD1
POWER
CHARGE
LD2
C34
2.2uF
VCC-3.3V
R2927K4
E4
10uF
R26100K
VCC-1.8V
R301K
123
5
4
VinGNDEN ADJ
Vout
U5
AP7331-ADJ
M1DMP2160UW
Q4BC846
Q5BC846
VCC-3.3V
12
J2NetTie
GNDGNDA
VCC-USB
C42
FP3FERRITE
12345 GND
IDD+D-VBUS
CN5
USB MINIB
R45100K
HDR1 HDR2
VCC-
3.3V
VCC-
3.3V
VCC-SYSGNDA
1234567891011121314151617181920212223242526
2728293031323334353637383940414243444546474849505152
DAT
A BU
S
Figure 1-3: Power supply schematics
Page 10
2. CY8C5868AXI-LP035 microcontroller
The mikromedia for PSoC® 5LP development system comes
with the CY8C5868AXI-LP035 microcontroller. This high-
performance 32-bit microcontroller with its integrated analog
and digital modules and in combination with other on-board
modules is ideal for multimedia applications.
Key microcontroller features- 64 MHz, 32-bit ARM® Cortex™-M3 Core;
- 256 KB Flash; 64 KB SRAM;
- 4 dedicated comparators
- 62 I/O pins;
- SPI, I2C, UART, CAN, USB, ADC, DAC;
- Timers, counters, PWMs;
- Internal Oscillators;
- RTCC; etc.
XtalOsc
IMO
Clocking SystemDigital System
Analog System
Power Mgmt. System
RTC Timer
WDT and Wake
ILO
POR and LVD
Sleep Power
1.8 V LDO
SMP
Universal Digital Block Array (24x UDB)
CAN 2.0
4x Timer Counter
PWM
I2C Master/Slave
FS US 2.0
USB PHY
EEPROM SRAM
EMIF FLASH
Cortex M3PU
Interrupt Controller
Cache Controller
PHUB DMA
Memory System CPU System Program & DebugProgram
DebugBoundary SCan
LCD Direct Drive Digital Filter Block
4x SC/CT Blocks Temp.
SensorCapSense
4x DAC 4x CMP
4x AMP
ADCs
GP
IOs
SIO
s
SIO
s
GP
IOs
Page 11
The microcontroller can be programmed in two ways:
01
02
Over USB HID PSoC® bootloader
Using mikroProg™ for PSoC® 5LP or other external programmers.
3. Programming the microcontroller
Figure 3-1: CY8C5868AXI-LP035
microcontroller
Page 12
Figure 3-2: Main Window of PSoC® Creator™ software
Programming with PSoC® Bootloader
You can program the microcontroller with the
bootloader which is preprogrammed into the device by
default. To transfer the bootloader file from PC to MCU
you need PSoC® Programmer™ and PSoC® Creator™.
Appropriate software packages can be found on the
links bellow. Before downloading software you need to
register on Cypress’ website.
Upon download, double click each setup file to begin
installation of the PSoC® Programmer and PSoC®
Creator™.
http://www.cypress.com/?rID=38050
http://www.cypress.com/psoccreator/
Page 13
01
04
02
05
03
06
Start Installation
Accept license agreement
Installation type
Installation in progress
Accept license agreement
Finish installation
PSoC® Creator™ Installation Wizard
Page 14
01
04
02
05
03
06
Start Installation
Accept license agreement
Setup
Installation in progress
Installation type
Finish installation
PSoC® Programmer™ Installation wizard
Page 15
Start PSoC® Creator™ and open the appropriate Workspace File for PSoC® Creator™ (.cywrk file):
Figure 3-4: PSoC® bootloader host
PSoC® bootloader quick guide
05
04
06
07
04 Click the blue folder icon and choose the .CYACD file which will be uploaded to MCU memory from the pop-up window.
05 Connect the USB cable, or if already connected press the Reset button on your mikromedia board. USB Human Interface Device will appear in the Ports section of the window.
Click the blue arrow icon within 10s to program the MCU memory, otherwise the existing microcontroller program will execute.
06
07 If everything is done properly the board will automatically reset and your new program will execute.
Figure 3-3: PSoC® bootloader host
02
01
03
01 Double click the Bootloadable component and the Configure window will appear.
02 Click the Dependencies tab to find a reference to the associated bootloader .HEX and .ELF files.
03 Click the Browse button and choose the Bootloader_USBFS.HEX file from the pop-up window. The file can be find in the bootloader example folder. Click the OK button.
Open PSoC® Creator™ Bootloader Host window (Tools > Bootloader Host):
NOTE: Prior to use, bootloader .HEX file needs to be programmed into the mikromedia for PSoC® 5LP’s MCU.
Page 16
The microcontroller can be programmed with the mikroProg™ for PSoC® 5LP programmer, PSoC® programmer™ software and PSoC® Creator™ software. The mikroProg™ is connected to the
development board via the CN6 connector, Figure 3-5. The
board also contains a Cortex Debug connector (CN3) which can be used with other external programmers.
mikroProg™ for PSoC®
5LP is a fast programmer
and hardware debugger. It’s
a great tool for programming the
Cypress® PSoC® 5LP microcontroller family.
Outstanding performance, easy operation, elegant
design and affordable price are its top features.
Programming with mikroProg™
programmer
Figure 3-5: Connecting mikroProg™ to mikromedia™
Page 17
Figure 3-6: mikroProg™ connection schematic
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14
P1[7
]28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3V
RESET#
VCCD
VCCD
VDDA
VCCA
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
TDO/SWV
TCK/SWDCKTMS/SWDIO
TDI
GNDA
VCC-3.3V
TDO/SWVTCK/SWDCKTMS/SWDIO
TDIRESET#
68109
75
1 23 4
CN3
JTAG/SWD
TDO/SWVTCK/SWDCKTMS/SWDIO
TDIRESET#
VCC-3.3V
1 23 45 67 89 10
CN6VCC-3.3V
E610uF
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V
VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
Page 18
Board is equipped with reset button, which is located at the top of the front side (Figure 4-1). Press it to reset the circuit. It will generate
a low voltage level on the microcontroller reset pin (input). In addition, a reset signal can also be sent through pin 27 on side headers
(Figure 4-2).
4. Reset Button
Figure 4-1: Reset button
Page 19
R110K
VCC-3.3V
C1100nF
R2
1K
RSTRESET#
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14P1
[7]
28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3V
RESET#
VCCD
VCCD
VDDA
VCCA
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
T1
GNDA
VCC-3.3V
E610uF
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
RXTX
SDASCL
HDR2
VCC-3.3V
RST 2728293031323334353637383940414243444546474849505152
Figure 4-2: Reset circuit schematic
Page 20
5. Crystal oscillator
Figure 5-1:External crystal oscillator (X1)
The use of crystal in all other schematics is implied even if it is purposely left out because of the schematic’s clarity.NOTE :
Board is equipped with a 16MHz crystal oscillator (X1) circuit that provides external clock
waveform to the microcontroller OSCO and OSCI pins.
This base frequency is suitable for further clock multipliers
and ideal for generation of necessary USB clock, which ensures
proper operation of bootloader and your custom USB-based applications.
The board also contains a 32.768kHz Crystal oscillator (X2) which provides
external clock for internal RTCC module.
Page 21
Figure 5-2: Crystal oscillator schematic
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14
P1[7
]28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3VVCCD
VCCD
VDDA
VCCA
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
GNDA
VCC-3.3V
E610uF
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V
VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
Page 22
6. microSD Card Slot
Board contains microSD card slot for using microSD cards in your projects. It enables you to store large amounts of data externally, thus
saving microcontroller’s memory. microSD cards use Serial Peripheral Interface (SPI) for communication with the microcontroller.
Figure 6-1: microSD card slot
Page 23
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14
P1[7
]28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3VVCCD
VCCD
VDDA
VCCA
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
SPI-MISOSPI-MOSI
SD-CD#SD-CS#
SPI-SCK
GNDA
VCC-3.3V
E610uF
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
R49 27
R50 27
SD-CS#
R2710K
VCC-MMC
R2810K
SD-CD#
VCC-MMC
R32
27
VCC-3.3V
E510uF
C40100nF
FP2
FERRITE
124567
CSDin+3.3VSCKGNDDout
CD
GN
D
CN2
MMC CARD MICRO
SPI-SCK
SPI-MOSI
SPI-MISO
C431uF
Figure 6-2: microSD card slot module connection schematic
Page 24
The development system features a TFT 320x240 display (MI0283QT-9A) covered
with a resistive touch panel. Together they form a functional touch screen unit.
It enables data to be entered and displayed at the same time. The TFT display is
capable of showing graphics in 262.144 diffe rent colors.
7. Touch Screen
Figure 7-1: Touch Screen
Page 25
Figure 7-2: Touch Screen connection schematic
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14
P1[7
]28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3VVCCD
VCCD
VDDA
VCCA
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
LCD-RST
LCD-RD#
LCD-WR#LCD-RS
LCD
-D7
LCD
-D6
LCD
-D5
LCD
-D4
LCD
-D3
LCD
-D2
LCD
-D1
LCD
-D0
GNDA
VCC-3.3V
E610uF
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
LCD-XL
LCD
-YU
LCD-CS#LCD-XR
LCD-YD
LCD
-BLE
D
R1910K
VCC-SYS
LCD-RST
LCD-RSLCD-CS#
LCD-YULCD-XLLCD-YDLCD-XR
R2110K
R3610K
LCD-BLED
R2512
VCC-3.3V
LCD-RD#LCD-WR#
VCC-3.3V
LCD-D7
R20
1K
2
15
12
35
11
36
3456
14
789
13
43
33
10
37383940
444546
34
1
47
1617181920212223242526272829303132
4142
LED-KLED-A1LED-A2LED-A3LED-A4IM0IM3IM2IM1RESETVSYNCHSYNCDOTCLKENABLE
DB0DB1DB2DB3DB4DB5DB6DB7DB8DB9DB10DB11DB12DB13DB14DB15DB16DB17
SDOSDIRDWRRSCSTEVCC-IOVCCVCCGNDXRYDXLYU
TFT1
MI0283QT-9A
LCD-D0LCD-D1LCD-D2LCD-D3LCD-D4LCD-D5LCD-D6
BLED-
Q2BC846
Q1BC846
Q3BC846
C44
10uF
VCC-3.3V
Page 26
The mikromedia for PSoC® 5LP features stereo audio codec VS1053. This
module enables audio reproduction through stereo headphones connected
to the system via a 3.5mm connector CN1. All functions of this module are
controlled by the microcontroller over Serial Peripheral Interface (SPI).
8. Audio Module
Figure 8-1: On-board VS1053
MP3 codec
Page 27
Figure 8-2: Audio module connection schematic
MP3-CS#
C26
22pF
C25
22pFR141M
R2210K R24 10K
MP3
-DRE
Q
R610K
R1510K
X312.288MHz
C241uF
GPI
O
LEFT
RIGHT
GBUF
E310uF
E210uF
CN1
PHONEJACK
LEFT
RIGHT
C28 10nFC2947nF
C2710nF
R1810
R1610
R1710
R11 10
R13 10
R8
470
C233.3nF
R9100K
R5
470
C213.3nF
R7100K
L
R
R2327
2345671112
1314
25
24232221
18171615
8 1
19
9102726
20
28 29 30 31 32 33 34 35 36
373839404142434445464748M
CP/L
N1
MIC
NXR
ESET
DG
ND
0CV
DD
0IO
VDD
0CV
DD
1D
REQ
GPI
O2
GPI
O3
GPI
O6
GPI
O7
XDCS/BSYNCIOVDD1VC0DGND1XTAL0XTAL1IOVDD2DGND2DGND3DGND4XCSCVDD2
GPI
O5
RX TX SCLK
SI SO CVD
D3
XTES
TG
PIO
0G
PIO
1G
ND
GPI
O4
AGND0AVDD0
AVDD2
AGND1AGND2
AGND3LN2
LEFT
RCAPAVDD1
GBUF
RIGHT
VS1053
U3
VCC-1.8V VCC-3.3V
MP3
-RST
#
MP3-DCS
SPI-
MIS
O
SPI-
SCK
SPI-
MO
SI
R5110
R5210
C35
100nF
C36
100nF
VCC-3.3V
C37
100nF
VCC-3.3V
C38
100nF
VCC-3.3V VCC-3.3V
C39
100nF
VCC-3.3V
C33
100nF
C32
100nF
C30
100nF
C31
100nF
VCC-1.8V VCC-1.8V VCC-1.8V VCC-1.8V
C45
1uF
VCC-3.3V
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14
P1[7
]28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3VVCCD
VCCD
VDDA
VCCA
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
SPI-MISOSPI-MOSI
SPI-SCK
GNDA
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD VCC-3.3V
E610uF
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
R49 27
R50 27
MP3
-CS#
MP3
-DC S
MP3-RST#MP3-DREQ
Page 28
9. USB connection
Figure 9-1: Connecting USB cable to MINI-B USB connector
CY8C5868AXI-LP035 microcontroller has an integrated USB module connected to a
MINI-B USB connector on your mikromedia. It can be used to connect the target USB host
device, such as a PC, to your board.
Page 29
Figure 9-2: USB module connection schematic
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14
P1[7
]28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3VVCCD
VCCD
VDDA
VCCA
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
USB
-D_N
USB
-D_P
USB-DET
GNDA
VCC-3.3V
E610uF
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
VCC-USB
C4210uF
FP3FERRITE
R40100K 1
2345 GND
IDD+D-VBUS
CN5
USB MINIB
USB-DET
R45100K
USB-D_NUSB-D_P
R44100K
R48100K
Page 30
10. Accelerometer
Figure 10-1: Accelerometer module
You can set the accelerometer address to 0 or 1 by re-soldering
the SMD jumper (zero-ohm resistor) to the appropriate position.
Jumper is soldered to position 1 by default.
On-board ADXL345 accelerometer measures
acceleration in three axis: x, y and z. Most common
use is to determine screen orientation, but there are
many other fields of usage. Communication between the
accelerometer and the microcontroller is established through I2C interface.
Page 31
Figure 10-2: Accelerometer connection schematic
VCC-3.3V
R310K
R410K
VCC-3.3V
ACC ADDRESS123
VCCGNDRes4 GND5 GND6 VCC
7CS
8INT1
9INT2
10NC
11Res
12ADD
13SDA
14SC
L
U2
ADXL345
VCC-3.3V
I2C-SDA
I2C-SCL
C20100nF
C19100nF
VCC-3.3V VCC-3.3V
123
J1
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14
P1[7
]28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3VVCCD
VCCD
VDDA
VCCA
I2C-SDAI2C-SCL
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
GNDA
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
E610uF
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
Page 32
11. FRAM
Since multimedia applications are getting increasingly demanding, it is necessary
to provide additional memory space for storing more data. The FRAM module enables the
microcontroller to use additional 2Mbit ferroelectric non-volatile memory. It is connected to the
microcontroller via the Serial Peripheral Interface (SPI).
Figure 11-1:FRAM module
Page 33
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14P1
[7]
28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3VVCCD
VCCD
VDDA
VCCA
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
SPI-MISOSPI-MOSI
SPI-SCK
GNDA
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
VCC-3.3V
E610uF
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
R49 27
R50 27
FLAS
H-C
S#
C22
100nFR1010K
VCC-3.3V
123
54678S
QWGND D
CHOLD
VCC
U4
FM25H20
R12 27
FLASH-CS#SPI-MISO
SPI-SCKSPI-MOSI
VCC-3.3V
Figure 11-2: FRAM module connection schematic
Page 34
C310pF
C210pF
X2
32.768KHz
CY8C5868AXI-LP035
P2[5]1
P2[6]2
P2[7]3
P12[4]4
P12[5]5
P6[4]6
P6[5]7
P6[6]8
P6[7]9
IND11
XRES15
P5[0]16
P5[1]17
P5[2]18
P5[3]19
P1[0]20
P1[1]21
P1[2]22
P1[3]23
P1[4]24
P1[5]25
VSSB10
VBOOST12
VBAT13
VSSD14
P1[7
]28
P12[
6]29
P12[
7]30
P5[4
]31
P5[5
]32
P5[6
]33
P5[7
]34
P15[
6]35
P15[
7]36
NC
40
NC
41
P15[
0]42
P15[
1]43
P3[0
]44
P3[1
]45
P3[2
]46
P3[3
]47
P3[4
]48
P3[5
]49
VDD
IO1
26
VDD
D37
VSSD
38
VCCD
39
VDD
IO3
50
P3[6] 51P3[7] 52P12[0] 53P12[1] 54P15[2] 55P15[3] 56NC 57NC 58NC 59NC 60NC 61NC 62
P12[2] 67P12[3] 68P4[0] 69P4[1] 70P0[0] 71P0[1] 72P0[2] 73P0[3] 74
VCCA 63VSSA 64VDDA 65VSSD 66
VDDIO0 75
P0[4
]76
P0[5
]77
P0[6
]78
P0[7
]79
P4[2
]80
P4[3
]81
P4[4
]82
P4[5
]83
P4[6
]84
P4[7
]85
P6[0
]89
P6[1
]90
P6[2
]91
P6[3
]92
P15[
4]93
P15[
5]94
P2[0
]95
P2[1
]96
P2[2
]97
P2[3
]98
P2[4
]99
VCCD
86VS
SD87
VDD
D88
VDD
IO2
100
P1[6
]27
U1
VCC-3.3V
RESET#
RESET#
VCCD
VCCD
VDDA
VCCA
I2C-SDAI2C-SCL
XOSCIXOSCO
X1
16MHz
C922pF
C822pF
OSC
IO
SCO
SPI-MISOSPI-MOSI
UAR
T-TX
UAR
T-RX
HD
R-G
PIO
11H
DR
-GPI
O10
HD
R-G
PIO
9
HDR-PWM3HDR-PWM2
HDR-PWM1HDR-PWM0
HDR-AN0HDR-AN1HDR-AN2
HD
R-AN
3H
DR-
AN4
HD
R-AN
5H
DR-
AN6
HD
R-IN
T0
HD
R-IN
T1H
DR-
INT2
HD
R-IN
T3
LCD
-D7
LCD
-D6
LCD
-D5
LCD
-D4
LCD
-D3
LCD
-D2
LCD
-D1
LCD
-D0
SPI-SCK
GNDA
VCC-3.3V
E610uF
C13100nF
C14100nF
C15100nF
C16100nF
E110uF
VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V VCC-3.3V
C17100nF
VCC-3.3V
C18100nF
VCC-3.3V
C121uF
VCCD
C11100nF
VCCD
C10100nF
VCCD
VCC-3.3V
VDDAFP1
C7100nF
GNDA
C61uF
GNDA
C51uF
GNDA
VCCA
C4100nF
GNDA
VCCA
R49 27
R50 27
HD
R-G
PIO
8H
DR
-GPI
O7
HD
R-G
PIO
6
HD
R-G
PIO
5
HD
R-G
PIO
3H
DR
-GPI
O2
HD
R-G
PIO
1H
DR
-GPI
O0
HD
R-G
PIO
4
RXTX
SCKSDISDO
SDASCL
AN
HDR1
HDR2
VCC-3.3V
VCC-3.3V
VCC-SYS
LEFTRIGHT
AUDIO
LR
UART-RXUART-TX
SPI-MISOSPI-SCK
SPI-MOSI
I2C-SDAI2C-SCL
HDR-AN0HDR-AN1HDR-AN2HDR-AN3HDR-AN4HDR-AN5HDR-AN6HDR-INT0HDR-INT1HDR-INT2HDR-INT3
HDR-PWM0HDR-PWM1HDR-PWM2HDR-PWM3HDR-GPIO0HDR-GPIO1HDR-GPIO2HDR-GPIO3HDR-GPIO4HDR-GPIO5HDR-GPIO6HDR-GPIO7HDR-GPIO8HDR-GPIO9
HDR-GPIO10HDR-GPIO11
LCD-D7
LCD-D0LCD-D1LCD-D2LCD-D3LCD-D4LCD-D5LCD-D6
INT
PWM
GNDA
1234567891011121314151617181920212223242526
2728293031323334353637383940414243444546474849505152
12. Pads
Most microcontroller pins are available for further connectivity via two 1x26 rows of
connection pads on both sides of the mikromedia board. They are designed to match
additional shields, such as the Battery Boost, Gaming, PROTO shields and others.
Pads HDR2
Pads HDR1
Figure 12-1: Connection pads schematic
Page 35
13. Pinout
SPI LinesInterrupt LinesAnalog LinesDigital lines I2C Lines UART lines PWM lines
Reset pin5V power supplyReference Groundleft ch.right ch.
3.3V power supply3.3V power supplyReference GroundReference Ground
Pin functions Pin functions
audio out
UART
I2CSPISCKSDI
SDO
RXTXSCLSDA
Analog Lines
Interrupt Lines
Digital I/O lines
PWM lines
Digital I/O lines
VSYS RST
GND
GNDP0[1] LP0[2] RP0[3] P12[3]P0[4] P12[2]P0[5] P12[1]P0[6] P12[0]P0[7] P3[3]P4[2] P3[2]P4[4] P3[1]P4[5] P3[0]P4[6] P4[3]P2[2] P4[7]P2[1] P15[4]P2[0] P5[7]
P15[5] P5[6]P6[3] P5[5]P6[2] P5[4]P6[1] P12[7]P6[0] P12[6]P2[5] P1[7]P2[6] P12[4]P2[7] P12[5]3.3V 3.3V
GND
GND
Page 36 Page 37
14. Dimensions73.66
81.15
63.5
2.672.54
36.5
8
55.8
8
60.4
5
1.6 63
2.03
3195
29004157
7276
2380
2200
50.2
19
76
2500
1440
105100
80
8.89
350
7.62
300
3.2126
57.62268
69.32728
43.2
17
00
Legend
Page 37
15. mikromedia accessories
We have prepared a set of
extension boards pin-compatible
with your mikromedia, which
enable you to easily expand
your board basic functionality.
We call them mikromedia
shields. But we also offer other
accessories, such as Li-polymer
battery, stacking headers, wire
jumpers and more.
04
01 02 03
Gaming shield
Connect shield BatteryBoost shield PROTO shield
06 07Li-Polymer battery Wire Jumpers05 mikroBUS shield
Page 38
Notes:
Page 39
DISCLAIMER
All the products owned by MikroElektronika are protected by copyright law and international copyright treaty. Therefore, this manual is to be treated as any other copyright material. No part of this manual, including product and software described herein, may be reproduced, stored in a retrieval system, translated or transmitted in any form or by any means, without the prior written permission of MikroElektronika. The manual PDF edition can be printed for private or local use, but not for distribution. Any modification of this manual is prohibited.
MikroElektronika provides this manual ‘as is’ without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties or conditions of merchantability or fitness for a particular purpose.
MikroElektronika shall assume no responsibility or liability for any errors, omissions and inaccuracies that may appear in this manual. In no event shall MikroElektronika, its directors, officers, employees or distributors be liable for any indirect, specific, incidental or consequential damages (including damages for loss of business profits and business information, business interruption or any other pecuniary loss) arising out of the use of this manual or product, even if MikroElektronika has been advised of the possibility of such damages. MikroElektronika reserves the right to change information contained in this manual at any time without prior notice, if necessary.
TRADEMARKS
The MikroElektronika name and logo, the MikroElektronika logo, mikroC™, mikroBasic™, mikroPascal™, mikroProg™, mikroBUS™, Click Boards™ and mikromedia™ are trademarks of MikroElektronika. All other trademarks mentioned herein are property of their respective companies.All other product and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are only used for identification or explanation and to the owners’ benefit, with no intent to infringe.
Copyright © MikroElektronika, 2014, All Rights Reserved.
HIGH RISK ACTIVITIES
The products of MikroElektronika are not fault – tolerant nor designed, manufactured or intended for use or resale as on – line control equipment in hazard-ous environments requiring fail – safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines or weapons systems in which the failure of Software could lead directly to death, personal injury or severe physical or environmental damage (‘High Risk Activities’). MikroElektronika and its suppliers specifically disclaim any expressed or implied warranty of fitness for High Risk Activities.
If you want to learn more about our products, please visit our web site at www.mikroe.com
If you are experiencing some problems with any of our products or just need additional
information, please place your ticket at www.mikroe.com/support/
If you have any questions, comments or business proposals,
do not hesitate to contact us at [email protected] for PSoC 5LP Manual
ver. 1.01
0 100000 025086
PSoC
