2
MICHAEL ARNOLD 3040 CENTRAL AVE, APT D101 • Billings, Montana 59102-8612 (850) 624-6904 • [email protected] NACE CIP Level 2 Coating Inspector #13700 Summary of Qualifications Was a Coating Inspector on the Jack St Malo project for Chevron Lead Coating inspector on Bison Pipeline. Worked on Keystone Pipe Line as lead Coating Inspector NACE CIP Level 2, HUET/METS, GulfSafe, TWIC, Valid Passport Professional Experience SPT Energy Group, Channelview, Texas August 2014 February 2015 Coating Inspector on Gunflint/Big Bend, and Appaloosa projects Assured 3LPP was applied correctly Monitored load-out operations Inspected the application of FBE coating Witnessed I.D. blasting On and Offshore Quality Inspection, Plentywood, Montana May 2014 June 2014 Coating Inspector on Raymond Station Recoat Monitored the application of Polyurethane 3 layer coating system to block valves, launcher receiver set, and Proofer set. Assured coating was applied within proper specifications Coordinated with U.S. Border patrol on Canadian border to enable coating team to access valve set without getting arrested. JP Kenny, Gulf of Mexico February 2013 April 2014 Coating inspector on Jack St Malo/Bigfoot projects Worked with Coating team to qualify new equipment on brand new ship Monitored the application of FBE on main line and in the triple joint factory Assured that the application of shrink sleeves were within specifications Promoted and encouraged safe work practices and team work Tulsa Inspection Resources, Baker, Montana July 2012 January 2013 Coating Inspector on the Bakken Pipeline Inspected the application of RD6 Tape on main line and tie-in section Monitored the application of 2-part epoxy on road bore and direction drill sections Witnessed lowering in and ditching operations. SPT Energy Group, Pacific Ocean November 2011 December 2011 Coating Inspector for Beta Offshore Line Replacement Project First pipeline to be installed off the Pacific coast in 20 years. Monitored for damage of 3LPP and 5LPP during installation of pipeline. Inspected repair of damages. Assured coating and other materials were applied properly on riser pipe. Total Inspection Services, Big Piney, Wyoming August 2011 November 2011 Coating Inspector for Riley Ridge project Monitored the receiving of Inconel lined pipe from Germany Inspected the two layer FBE coating process at the ShawCor coating mill in Lindon, Utah Coordinated and monitored the application of high temperature 2-part epoxy on three lines from wells to compressor station.

Michael J. Arnold's Resume (NACE CIP Level 2 Coating Inspector)

Embed Size (px)

Citation preview

Page 1: Michael J. Arnold's Resume (NACE CIP Level 2 Coating Inspector)

MICHAEL ARNOLD3040 CENTRAL AVE, APT D101 • Billings, Montana 59102-8612

(850) 624-6904 • [email protected] CIP Level 2 Coating Inspector #13700

Summary of Qualifications

• Was a Coating Inspector on the Jack St Malo project for Chevron • Lead Coating inspector on Bison Pipeline. • Worked on Keystone Pipe Line as lead Coating Inspector • NACE CIP Level 2, HUET/METS, GulfSafe, TWIC, Valid Passport

Professional Experience

SPT Energy Group, Channelview, Texas August 2014 – February 2015Coating Inspector on Gunflint/Big Bend, and Appaloosa projects

• Assured 3LPP was applied correctly • Monitored load-out operations • Inspected the application of FBE coating • Witnessed I.D. blasting

On and Offshore Quality Inspection, Plentywood, Montana May 2014 – June 2014Coating Inspector on Raymond Station Recoat

• Monitored the application of Polyurethane 3 layer coating system to block valves, launcher receiver set, and Proofer set.

• Assured coating was applied within proper specifications • Coordinated with U.S. Border patrol on Canadian border to enable coating team to access valve set without

getting arrested.

JP Kenny, Gulf of Mexico February 2013 – April 2014Coating inspector on Jack St Malo/Bigfoot projects

• Worked with Coating team to qualify new equipment on brand new ship • Monitored the application of FBE on main line and in the triple joint factory • Assured that the application of shrink sleeves were within specifications • Promoted and encouraged safe work practices and team work

Tulsa Inspection Resources, Baker, Montana July 2012 – January 2013Coating Inspector on the Bakken Pipeline

• Inspected the application of RD6 Tape on main line and tie-in section • Monitored the application of 2-part epoxy on road bore and direction drill sections • Witnessed lowering in and ditching operations.

SPT Energy Group, Pacific Ocean November 2011 – December 2011Coating Inspector for Beta Offshore Line Replacement Project

• First pipeline to be installed off the Pacific coast in 20 years. • Monitored for damage of 3LPP and 5LPP during installation of pipeline. • Inspected repair of damages. • Assured coating and other materials were applied properly on riser pipe.

Total Inspection Services, Big Piney, Wyoming August 2011 – November 2011Coating Inspector for Riley Ridge project

• Monitored the receiving of Inconel lined pipe from Germany • Inspected the two layer FBE coating process at the ShawCor coating mill in Lindon, Utah • Coordinated and monitored the application of high temperature 2-part epoxy on three lines from wells to

compressor station.

Page 2: Michael J. Arnold's Resume (NACE CIP Level 2 Coating Inspector)

UniversalPegasus, Broadus, Montana April 2010 – November 2010Lead Coating Inspector on Bison Pipeline

• Reviewed coating inspection forms turned in by other inspectors. • Monitored other inspectors during coating operations to insure proper inspection techniques were used. • Inspected 2-part epoxy applications on main line, tie-in, road bore, and lowering in.

Universal Ensco, St. Joseph, Missouri May 2009 – October 2009Lead Coating Inspector on Keystone Pipeline

• Reviewed coating inspection forms turned in by other inspectors. • Monitored other inspectors during coating operations to insure proper inspection techniques were used. • Inspected 2-part epoxy applications on main line, tie-in, road bore, and lowering in.

U.S. Air Force November 1995 – August 2007F-15 Avionics Technician

• Selected as Non-Commissioned Officer In-Charge of Debrief section on Second tour at RAF Lakenheath, UK • Only Airman accepted on the Flight Control Impound team at Langley AFB, Virginia • Was only Airmen selected as Specialist Expediter in the 27th Fighter Squadron, Langley AFB, Virginia • Participated in Operation Southern Watch • Participated during Kosovo War while stationed at RAF Lakenheath, UK

Education

University of Phoenix, On-Line August 2012 – PresentBachelor of Science in Small Business and Entrepreneurship

Additional Information

• Skills: Excel, Word, PowerPoint, Acrobat, Work well with team or as an individual, Quick learner, Good with computers, Professional, 12 year Air Force Veteran

References

• Robert House, Night shift lead, Gulf South and Gulf Crossing - (662) 419-7035 • Jason Brown, Chief, Jack St. Malo and Bigfoot - (337) 344-9972 • Herbert Holder, Assistant Chief, Keystone - (303) 748-3082 • Gordon Davis, Chief, ANKOR – (504) 231-4737