Upload
rocky
View
321
Download
0
Embed Size (px)
Citation preview
7/22/2019 MHA Parameters
1/38
MHA Parameters
active (Active)
Parameter name Active
Abbreviated
nameactive
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Defines MHA as AISG MHA or Non-AISG
MHA. Selectable values is 0 (false)= Non-AISG
MHA and 1 (true )= AISG MHA .
Range false (0), true (1)
Step -Unit -
Formula for
getting internal
value
false => 0 true => 1
Default value -
Default value
notes-
Related
functions-
Systeminformation
-
Modification BTS restart needed
Related
parameters
mhaType of MHA - If Active parameter value is
false there is relation to MHA type and delay
values used in RTT (antennaRoundTripDelay).
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in RNC
GUI-
RAC DB Table -
RAC DB
Column-
RAC userinterface name
-
7/22/2019 MHA Parameters
2/38
Table 105: Active
aisgProtocol (AISG protocol version)
Parameter name AISG protocol version
Abbreviated name aisgProtocol
3GPP name -Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
AISG protocol version
Note: Parameter is not seen in upload file in
this release, because BTS SW is not providing
those due to feature content change.
Range 2...255
Step 1Unit -
Formula for
getting internal
value
internal_value = gui_value
Default value -
Default value
notes-
Related functions -
System
information -
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in RNC
GUI-
RAC DB Table -
RAC DB Column -
RAC user
interface name-
Table 106: AISG protocol versionalarmThresholdLevel (Fault threshold level)
7/22/2019 MHA Parameters
3/38
Parameter name Fault threshold level
Abbreviated
namealarmThresholdLevel
3GPP name -
Managed object MHAParameter group -
Category -
Multiplicity 1
Description
Defines a configurable fault threshold level for
the mast-head amplifier, used if the MHA fault
detection parameter has the value 1 (in use).
Default value is depending on Flexi Filter (FF).
Range 120...775
Step 1
Unit mAFormula for
getting internal
value
internal_value = gui_value
Default value 165 mA
Default value
notes-
Related
functions-
System
information-
Modification BTS restart needed
Related
parameters-
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in
RNC GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 107: Fault threshold level
7/22/2019 MHA Parameters
4/38
antBandList (Antenna band list)
Parameter name Antenna band list
Abbreviated name antBandList
3GPP name -
Managed object MHAParameter group -
Category -
Multiplicity 4
DescriptionA list containing: operating frequency band,
beamwidth and the operation gain
Child parameters
antBeamwidth antOperFreqBand antOperGain
Formula for gettinginternal value
-
Default value -
Default value notes -
Related functions -
System information -
Modification On-Line
Related parameters -
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces
EM WBTS WBTS RAC RAC RACApp
References 3GPP Reference: 3GPP TS 25.463
Location in RNC
GUI -RAC DB Table -
RAC DB Column -
RAC user interface
name-
Table 108: Antenna band list
antBeamwidth (Antenna beamwidth)
Parameter name Antenna beamwidth
Abbreviated
name
antBeamwidth
3GPP name Beamwidth in each operating band in band order
7/22/2019 MHA Parameters
5/38
Managed object MHA
Parameter
group-
Category -
Multiplicity 1
Description
The antenna beamwidth for the band. Some RET
types may automatically update the beamwidth
information based on the configuration data
downloaded into the RET device. Some devices
may also restrict ovewriting the field.
Range 0...360
Step 1
Unit deg
Formula for
getting internalvalue internal_value = gui_value
Default value -
Default value
notes-
Special value 0 = unused (0)
Related
functions-
System
information-
Modification On-LineRelated
parameters-
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References 3GPP Reference: 3GPP TS 25.463
Location in
RNC GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 109: Antenna beamwidthantOperFreqBand (Antenna operating frequency band)
7/22/2019 MHA Parameters
6/38
Parameter name Antenna operating frequency band
Abbreviated
nameantOperFreqBand
3GPP name Antenna operating band(s)
Managed object MHAParameter group -
Category -
Multiplicity 1
Description
Antenna operating band(s):
1 - 3GPP band I: 2100 MHz
2 - 3GPP band II: 1900 MHz
3 - 3GPP band III: 1800 MHz
4 - 3GPP band IV: 1700 MHz
5 - 3GPP band V: 850 MHz
6 - 3GPP band VI: 800 MHz
7 - 3GPP band VII: 2600 MHz
8 - 3GPP band VIII: 900 MHz
9 - 3GPP band IX: 1800 MHz
10 - 3GPP band X: 1700 MHz
11 - 3GPP band XI: 1500 MHz
12 - 3GPP band XII: 700 MHz
13 - 3GPP band XIII: 700 MHz
14 - 3GPP band XIV: 700 MHz
Range
Band I (1), Band II (2), Band III (3), Band IV
(4), Band V (5), Band VI (6), Band VII (7),
Band VIII (8), Band IX (9), Band X (10), BandXI (11), Band XII (12), Band XIII (13), Band
XIV (14)
Step -
Unit -
Formula for
getting internal
value
gui ==> internal
Band I ==> 1
Band II ==> 2
Band III ==> 3
Band IV ==> 4
Band V ==> 5Band VI ==> 6
Band VII ==> 7
Band VIII ==> 8
Band IX ==> 9
Band X ==> 10
Band XI ==> 11
Band XII ==> 12
Band XIII ==> 13
Band XIV ==> 14
Default value -
Default valuenotes
-
7/22/2019 MHA Parameters
7/38
Related
functions-
System
information-
Modification On-Line
Related
parameters-
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References 3GPP Reference: 3GPP TS 25.463
Location in
RNC GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 110: Antenna operating frequency bandantOperGain (Antenna operation gain)
Parameter name Antenna operation gain
Abbreviated
nameantOperGain
3GPP name Gain in each operating band in band order
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
The antenna gain for the band. Some RET types
may automatically update the gain information
based on the configuration data downloaded into
the RET device. Some devices may also restrict
ovewriting the field.
Range 0...25.5
Step 0.1
Unit dBi
Formula for
getting internal
value
internal_value = gui_value * 10
7/22/2019 MHA Parameters
8/38
Default value -
Default value
notes-
Special value 0 = unused (0)
Relatedfunctions -
System
information-
Modification On-Line
Related
parameters-
Parameter
relationships-
Feature
dependencies
-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References 3GPP Reference: 3GPP TS 25.463
Location in
RNC GUI-
RAC DB Table -
RAC DBColumn -
RAC user
interface name-
Table 111: Antenna operation gain
antBearing (Antenna bearing)
Parameter name Antenna bearing
Abbreviated name antBearing
3GPP name Antenna Bearing
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description Antenna Bearing
Range 0...359.9
Step 0.1
Unit deg
Formula for getting
internal valueinternal_value = gui_value * 10
Default value -Default value notes -
7/22/2019 MHA Parameters
9/38
Related functions -
System information -
Modification On-Line
Related parameters -
Parameter relationships -
Feature dependencies
RAN1852 RET Device Naming(standard)
Interfaces
EM WBTS WBTS RAC RAC RACApp
References
3GPP Reference: 3GPP TS25.463
Location in RNC GUI -
RAC DB Table -
RAC DB Column -
RAC user interface name -
Table 112: Antenna bearing
antModel (Antenna model number)
Parameter name Antenna model number
Abbreviated name antModel
3GPP name Antenna model number
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description Antenna model number
Range 0...15
Step -
Unit characters
Formula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -
Modification On-Line
Related parameters -
Parameter relationships -
Feature dependencies
RAN1852 RET Device Naming(standard)
7/22/2019 MHA Parameters
10/38
Interfaces
EM WBTS WBTS RAC RAC RACApp
References
3GPP Reference: 3GPP TS25.463
Location in RNC GUI -
RAC DB Table -
RAC DB Column -
RAC user interface name -
Table 113: Antenna model number
antSerial (Antenna serial number)
Parameter name Antenna serial number
Abbreviated name antSerial3GPP name Antenna serial number
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description Antenna serial number
Range 0...17
Step -
Unit charactersFormula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -
Modification On-Line
Related parameters -
Parameter relationships -
Feature dependencies
RAN1852 RET Device Naming(standard)
Interfaces
EM WBTS WBTS RAC RAC RACApp
References
3GPP Reference: 3GPP TS25.463
Location in RNC GUI -RAC DB Table -
7/22/2019 MHA Parameters
11/38
RAC DB Column -
RAC user interface name -
Table 114: Antenna serial number
antlId (Antenna line identifier)
Parameter name Antenna line identifierAbbreviated name antlId
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
DescriptionIdentifies the specific antenna line assigned
to the MHA.
Range 1...18
Step 1
Unit -
Formula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -
Modification BTS restart needed
Related parameters antlId of ANTL - Identifies the specificantenna line id assigned to the MHA.
Parameter
relationships
Identifies the specific antenna line id
assigned to the MHA.
Feature dependencies -
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in RNC GUI -
RAC DB Table -
RAC DB Column -
RAC user interface
name-
Table 115: Antenna line identifier
baseStationID (Base station ID)
Parameter name Base station ID
Abbreviated name baseStationID
3GPP name Base Station IDManaged object MHA
7/22/2019 MHA Parameters
12/38
Parameter group -
Category -
Multiplicity 1
Description Base Station ID
Range 0...32Step -
Unit characters
Formula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -
Modification On-Line
Related parameters -
Parameter relationships -
Feature dependencies
RAN1852 RET Device Naming(standard)
Interfaces
EM WBTS WBTS RAC RAC RACApp
References
3GPP Reference: 3GPP TS25.463
Location in RNC GUI -
RAC DB Table -
RAC DB Column -
RAC user interface name -
Table 116: Base station ID
connection (Connection)
Parameter name Connection
Abbreviated name connection3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
DescriptionDefines the connection type for MHA/LNA.
Expected values: Internal | Shared | External
Range Internal (0), Shared (1), External (2)
Step -Unit -
7/22/2019 MHA Parameters
13/38
Formula for getting
internal value
gui ==> internal
Internal ==> 0
Shared ==> 1
External ==> 2
Default value -
Default value notes -
Related functions -
System information -
Modification BTS restart needed
Related parameters -
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in RNC
GUI-
RAC DB Table -
RAC DB Column -
RAC user interface
name
-
Table 117: Connection
downlinkDelay (Downlink delay)
Parameter name Downlink delay
Abbreviated
namedownlinkDelay
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Defines the "other" type of MHA delay in the
downlink direction. If the BTS Site Manager is
used to calculate RTT delay, this value must be
specified for an "Other" type MHA.
Range 0...1000
Step 1
Unit ns
Formula for
getting internalvalue internal_value = gui_value
7/22/2019 MHA Parameters
14/38
Default value 0 ns
Default value
notes-
Related
functions-
System
information-
Modification BTS restart needed
Related
parameters
antennaRoundTripDelay of ANTL - Delays from
passive mode MHA is added to
antennaRoundTripDelay value by formula
defined in antennaRoundTripDelay parameter
description.
mhaType of MHA - When passive mode "other"
type MHA is used, Downlink delay needs to be
defined other cases keep empty.Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location inRNC GUI
-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 118: Downlink delay
gainResolution (Gain resolution)
Parameter name Gain resolution
Abbreviated name gainResolution
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Gain resolution given as the gain resolution
figure expressed in dB.
Note: Parameter is not seen in upload file in
this release, because BTS SW is not providingthose due to feature content change.
7/22/2019 MHA Parameters
15/38
Range 0...99
Step 0.01
Unit dB
Formula for
getting internalvalue internal_value = gui_value * 100
Default value -
Default value
notes-
Related functions -
System
information-
Modification Not modifiable
Related
parameters
-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in RNCGUI
-
RAC DB Table -
RAC DB Column -
RAC user
interface name-
Table 119: Gain resolution
installDate (Installation date)
Parameter name Installation date
Abbreviated name installDate
3GPP name Installation Date
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description Installation Date
Range 0...6
Step -
Unit characters
Formula for gettinginternal value
internal_value = gui_value
7/22/2019 MHA Parameters
16/38
Default value -
Default value notes -
Related functions -
System information -
Modification On-LineRelated parameters -
Parameter relationships -
Feature dependencies
RAN1852 RET Device Naming(standard)
Interfaces
EM WBTS WBTS RAC RAC RACApp
References
3GPP Reference: 3GPP TS25.463Location in RNC GUI -
RAC DB Table -
RAC DB Column -
RAC user interface name -
Table 120: Installation date
installerID (Installers ID)
Parameter name Installers ID
Abbreviated name installerID
3GPP name Installer's ID
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description Installer's ID
Range 0...5
Step -
Unit characters
Formula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -
Modification On-Line
Related parameters -
Parameter relationships -Feature dependencies RAN1852 RET Device Naming
7/22/2019 MHA Parameters
17/38
(standard)
Interfaces
EM WBTS WBTS RAC RAC RACApp
References
3GPP Reference: 3GPP TS25.463
Location in RNC GUI -
RAC DB Table -
RAC DB Column -
RAC user interface name -
Table 121: Installers ID
lnaNumber (LNA number)Parameter name LNA number
Abbreviated name lnaNumber
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Parameter for MHA telling LNA number
inside one MHA. For Non AISG MHAs is
used -1 (not defined).
Range Not Defined (-1), LNA1 (0), LNA2 (1)
Step -
Unit -
Formula for getting
internal value
gui ==> internal
Not Defined ==> -1
LNA1 ==> 0
LNA2 ==> 1
Default value -
Default value notes -
Related functions -
System information -
Modification BTS restart needed
Related parameters -
Parameter
relationships-
Feature
dependencies-
Interfaces EM WBTS WBTS RAC
7/22/2019 MHA Parameters
18/38
RAC RACAppReferences -
Location in RNC
GUI-
RAC DB Table -
RAC DB Column -
RAC user interface
name-
Table 122: LNA number
maxGain (Maximum supported gain)
Parameter name Maximum supported gain
Abbreviated name maxGain
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Maximum supported gain given as gain figure
expressed in dB.
Note: Parameter is not seen in upload file in
this release, because BTS SW is not providing
those due to feature content change.
Range 0...99
Step 0.01
Unit dB
Formula for
getting internal
value
internal_value = gui_value * 100
Default value -
Default value
notes-
Related functions -
Systeminformation -
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
7/22/2019 MHA Parameters
19/38
References 3GPP Reference: AISG v.2.0
Location in RNC
GUI-
RAC DB Table -
RAC DB Column -
RAC user
interface name-
Table 123: Maximum supported gain
mhaAlarmDetection (MHA fault detection)
Parameter
nameMHA fault detection
Abbreviated
namemhaAlarmDetection
3GPP name -Managed
objectMHA
Parameter
group-
Category -
Multiplicity 1
Description
Defines if fault detection is used or not. The
options are 0 (false) and 1 (true). Default values
for Non-AISG MHAs and AISG MHAs in
passive mode: 1 Default values for AISG andthird party MHAs:0 Note: Configurable MHA
faults are allowed only for passive MHAs
Range false (0), true (1)
Step -
Unit -
Formula for
getting internal
value
false => 0 true => 1
Default value -
Default valuenotes
-
Related
functions-
System
information-
Modification BTS restart needed
Related
parameters-
Parameter
relationships -
7/22/2019 MHA Parameters
20/38
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in
RNC GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 124: MHA fault detectionmhaGain (MHA gain)
Parameter name MHA gain
Abbreviated name mhaGain
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Defines the gain of the mast-head
amplifier.
Range 0...99
Step 0.01
Unit dB
Formula for getting internal
valueinternal_value = gui_value * 100
Default value -
Default value notes -
Related functions -
System information -Modification BTS restart needed
Related parameters -
Parameter relationships -
Feature dependencies -
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in RNC GUI -
7/22/2019 MHA Parameters
21/38
RAC DB Table -
RAC DB Column -
RAC user interface name -
Table 125: MHA gain
mhaId (MHA identifier)Parameter name MHA identifier
Abbreviated name mhaId
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Defines the specific mast-head amplifier unit.
The value is given as consecutive numbers
starting from 1.
Range 1...255
Step 1
Unit -
Formula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -Modification BTS restart needed
Related parameters -
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in RNC
GUI-
RAC DB Table -
RAC DB Column -
RAC user interface
name-
Table 126: MHA identifier
mhaType (MHA type)
Parameter MHA type
7/22/2019 MHA Parameters
22/38
name
Abbreviated
namemhaType
3GPP name -
Managedobject MHA
Parameter
group-
Category -
Multiplicity 1
Description
Defines the type of the MHA. The supported
MHA types are: WMHA, WMHB, WMHC,
WMHD, MDTA, MDPA, MDGA, MDDA, FLJA,
DTMAFV1, DTMAFV3, DTMAFV4,
DTMARETFV1, DTMARETFV2,
DTMARETFV3, DTMARETFV4,
SDTMARETFV1, SDTMARETFV2,
SDTMARETFV3, TMAFV1, TMAFV3,
TMAFV4, TMARETFV1 and other.
Range
WMHA (0), WMHB (1), WMHC (2), WMHD
(3), MDTA (4), MDPA (5), MDGA (6), MDDA
(7), FLJA (8), DTMAFV1 (9), DTMAFV3 (10),
DTMAFV4 (11), DTMARETFV1 (12),
DTMARETFV2 (13), DTMARETFV3 (14),
DTMARETFV4 (15), SDTMARETFV1 (16),
SDTMARETFV2 (17), SDTMARETFV3 (18),TMAFV1 (19), TMAFV3 (20), TMAFV4 (21),
TMARETFV1 (22), Other (23)
Step -
Unit -
Formula for
getting internal
value
gui ==> internal
WMHA ==> 0
WMHB ==> 1
WMHC ==> 2
WMHD ==> 3
MDTA ==> 4MDPA ==> 5
MDGA ==> 6
MDDA ==> 7
FLJA ==> 8
DTMAFV1 ==> 9
DTMAFV3 ==> 10
DTMAFV4 ==> 11
DTMARETFV1 ==> 12
DTMARETFV2 ==> 13
DTMARETFV3 ==> 14
DTMARETFV4 ==> 15SDTMARETFV1 ==> 16
7/22/2019 MHA Parameters
23/38
SDTMARETFV2 ==> 17
SDTMARETFV3 ==> 18
TMAFV1 ==> 19
TMAFV3 ==> 20
TMAFV4 ==> 21
TMARETFV1 ==> 22Other ==> 23
Default value -
Default value
notes-
Related
functions-
System
information-
Modification BTS restart needed
Related
parameters
antennaRoundTripDelay of ANTL - RTT delaydefault values for Nokia MHAs is defined in
antennaTripDelay parammeter description. Only
"other" - type of MHAs delay value needs to be
defined.
active of MHA - Only passsive mode MHAs delay
values needs to be defined. Delay from active
mode Nokia MHA is not added to RTT delay.
downlinkDelay of MHA - When passive mode
"other" type MHA is used, Downlink delay needs
to be defined other cases keep empty.
uplinkDelay of MHA - When passive mode
"other" type MHA is used, Uplink delay needs to
be defined other cases keep empty.
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in
RNC GUI-
RAC DB
Table-
RAC DB
Column-
RAC user
interface name-
Table 127: MHA type
7/22/2019 MHA Parameters
24/38
minGain (Minimum supported gain)
Parameter name Minimum supported gain
Abbreviated name minGain
3GPP name -
Managed object MHAParameter group -
Category -
Multiplicity 1
Description
Minimum supported gain given as gain figure
expressed in dB.
Note: Parameter is not seen in upload file in
this release, because BTS SW is not providing
those due to feature content change.
Range 0...99
Step 0.01Unit dB
Formula for
getting internal
value
internal_value = gui_value * 100
Default value -
Default value
notes-
Related functions -
System
information-
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces
WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in RNC
GUI-
RAC DB Table -
RAC DB Column -
RAC user
interface name-
Table 128: Minimum supported gain
prodCode (Product code)
7/22/2019 MHA Parameters
25/38
Parameter name Product code
Abbreviated name prodCode
3GPP name -
Managed object MHA
Parameter group -Category -
Multiplicity 1
DescriptionDefines the product code of the unit in
question.
Range 1...80
Step -
Unit characters
Formula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -
Modification BTS restart needed
Related parameters -
Parameter relationships -
Feature dependencies -
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in RNC GUI -
RAC DB Table -
RAC DB Column -
RAC user interface name -
Table 129: Product code
releaseId3Gpp (3GPP realese ID)
Parameter name 3GPP realese ID
Abbreviated name releaseId3Gpp
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
3GPP protocol version
Note: Parameter is not seen in upload file in
this release, because BTS SW is not providingthose due to feature content change.
7/22/2019 MHA Parameters
26/38
Range 0...255
Step 1
Unit -
Formula for
getting internalvalue internal_value = gui_value
Default value -
Default value
notes-
Related functions -
System
information-
Modification Not modifiable
Related
parameters
-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
References 3GPP Reference: 3GPP TS 25.463
Location in RNCGUI
-
RAC DB Table -
RAC DB Column -
RAC user
interface name-
Table 130: 3GPP realese ID
scannedAntennaInterface (Scanned antenna interface)
Parameter
nameScanned antenna interface
Abbreviated
namescannedAntennaInterface
3GPP name -
Managed
objectMHA
Parameter
group-
Category -
Multiplicity 1
Description Defines which antenna interface is scanned.Expected value: FRx-ANTx and empty string
7/22/2019 MHA Parameters
27/38
where FRx: 1...3 and ANTx: 1...6 It is depending
on radio module type which antennas are capable
for scanning / AISG device detection.
Range
NONE (-1), FR1-ANT1 (0), FR1-ANT3 (1),
FR1-ANT5 (2), FR2-ANT1 (3), FR2-ANT3 (4),
FR2-ANT5 (5), FR3-ANT1 (6), FR3-ANT3 (7),FR3-ANT5 (8)
Step -
Unit -
Formula for
getting internal
value
gui ==> internal
NONE ==> -1
FR1-ANT1 ==> 0
FR1-ANT3 ==> 1
FR1-ANT5 ==> 2
FR2-ANT1 ==> 3
FR2-ANT3 ==> 4FR2-ANT5 ==> 5
FR3-ANT1 ==> 6
FR3-ANT3 ==> 7
FR3-ANT5 ==> 8
Default value -
Default value
notes-
Related
functions-
Systeminformation
-
Modification BTS restart needed
Related
parameters-
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in
RNC GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 131: Scanned antenna interface
7/22/2019 MHA Parameters
28/38
sectorID (Sector ID)
Parameter name Sector ID
Abbreviated name sectorID
3GPP name Sector ID
Managed object MHAParameter group -
Category -
Multiplicity 1
Description Sector ID
Range 0...32
Step -
Unit characters
Formula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -
Modification On-Line
Related parameters -
Parameter relationships -
Feature dependencies
RAN1852 RET Device Naming(standard)
Interfaces
EM WBTS WBTS RAC RAC RACApp
References
3GPP Reference: 3GPP TS25.463
Location in RNC GUI -
RAC DB Table -
RAC DB Column -RAC user interface name -
Table 132: Sector ID
serNum (Serial number)
Parameter name Serial number
Abbreviated name serNum
3GPP name -
Managed object MHA
Parameter group -
Category -Multiplicity 1
7/22/2019 MHA Parameters
29/38
DescriptionDefines the serial number of the unit
in question.
Range 1...80
Step -
Unit charactersFormula for getting
internal valueinternal_value = gui_value
Default value -
Default value notes -
Related functions -
System information -
Modification BTS restart needed
Related parameters -
Parameter relationships -
Feature dependencies -
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in RNC GUI -
RAC DB Table -
RAC DB Column -
RAC user interface name -
Table 133: Serial number
substance (Substance)
Parameter name Substance
Abbreviated name substance
3GPP name -
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Substance version number
Note: Parameter is not seen in upload file in
this release, because BTS SW is not providing
those due to feature content change.
Range 2...255
Step 1
Unit -
Formula for
getting internal
value
internal_value = gui_value
Default value -
7/22/2019 MHA Parameters
30/38
Default value
notes-
Related functions -
System
information-
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in RNC
GUI-
RAC DB Table -
RAC DB Column -
RAC user
interface name-
Table 134: Substance
tmaSubunitRxFreqBandMax (TMA Subunit Receive Frequency Band Max)Parameter name TMA Subunit Receive Frequency Band Max
Abbreviated
nametmaSubunitRxFreqBandMax
3GPP name TMA Subunit receive frequency band
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
TMA Subunit receive frequency band
Note: Parameter is not seen in upload file in this
release, because BTS SW is not providing those
due to feature content change.
Range 0...6553500
Step 100
Unit kHz
Formula for
getting internal
value
internal_value = gui_value
Default value -Default value -
7/22/2019 MHA Parameters
31/38
notes
Related
functions-
System
information-
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in RNC
GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 135: TMA Subunit Receive Frequency Band MaxtmaSubunitRxFreqBandMin (TMA Subunit Receive Frequency Band Min)
Parameter name TMA Subunit Receive Frequency Band Min
Abbreviated
nametmaSubunitRxFreqBandMin
3GPP name TMA Subunit receive frequency band
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
TMA Subunit receive frequency band
Note: Parameter is not seen in upload file in this
release, because BTS SW is not providing those
due to feature content change.
Range 0...6553500
Step 100
Unit kHz
Formula for
getting internal
value
internal_value = gui_value
Default value -
7/22/2019 MHA Parameters
32/38
Default value
notes-
Related functions -
System
information-
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in RNC
GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 136: TMA Subunit Receive Frequency Band MintmaSubunitTxFreqBandMax (TMA Subunit Transmit Frequency Band Max)
Parameter name TMA Subunit Transmit Frequency Band Max
Abbreviated
nametmaSubunitTxFreqBandMax
3GPP name TMA Subunit transmit frequency band
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
TMA Subunit transmit frequency band
Note: Parameter is not seen in upload file in this
release, because BTS SW is not providing those
due to feature content change.
Range 0...6553500
Step 100
Unit kHz
Formula for
getting internal
value
internal_value = gui_value
Default value -
7/22/2019 MHA Parameters
33/38
Default value
notes-
Related
functions-
System
information -
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in RNC
GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 137: TMA Subunit Transmit Frequency Band Max
tmaSubunitTxFreqBandMin (TMA Subunit Transmit Frequency Band Min)
Parameter name TMA Subunit Transmit Frequency Band Min
Abbreviated
nametmaSubunitTxFreqBandMin
3GPP name TMA Subunit transmit frequency band
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
TMA Subunit transmit frequency band
Note: Parameter is not seen in upload file in this
release, because BTS SW is not providing those
due to feature content change.
Range 0...6553500
Step 100
Unit kHz
Formula for
getting internal
value
internal_value = gui_value
7/22/2019 MHA Parameters
34/38
Default value -
Default value
notes-
Related functions -
Systeminformation -
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces
WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in RNC
GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name
-
Table 138: TMA Subunit Transmit Frequency Band Min
tmaSubunitType (TMA Subunit Type)
Parameter name TMA Subunit Type
Abbreviated
nametmaSubunitType
3GPP name TMA Subunit type
Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
TMA Subunit type
Note: Parameter is not seen in upload file in this
release, because BTS SW is not providing those
due to feature content change.
Range
Bit 0: Bypass, Bit 1: VSWR, Bit 2: spare
(Always 0), Bit 3: spare (Always 0), Bit 4: spare
(Always 0), Bit 5: spare (Always 0), Bit 6: spare
(Always 0), Bit 7: spare (Always 0)
Step -
Unit -
7/22/2019 MHA Parameters
35/38
Formula for
getting internal
value
-
Default value 0
Default value
notes -
Related
functions-
System
information-
Modification Not modifiable
Related
parameters-
Parameter
relationships-
Feature
dependencies
RAN1852 RET Device Naming(standard)
Interfaces WBTS -> RAC
References 3GPP Reference: AISG v.2.0
Location in
RNC GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name-
Table 139: TMA Subunit Type
uplinkDelay (Uplink delay)
Parameter name Uplink delay
Abbreviated
nameuplinkDelay
3GPP name -Managed object MHA
Parameter group -
Category -
Multiplicity 1
Description
Defines the MHA delay in the uplink direction
for an "Other" type MHA. If the BTS Site
Manager is used to calculate antenna round trip
time delay, this value must be specified.
Range 0...1000
Step 1
7/22/2019 MHA Parameters
36/38
Unit ns
Formula for
getting internal
value
internal_value = gui_value
Default value 0 ns
Default value
notes-
Related
functions-
System
information-
Modification BTS restart needed
Related
parameters
antennaRoundTripDelay of ANTL - Delays from
passive mode MHA is added to
antennaRoundTripDelay value by formula
defined in antennaRoundTripDelay parameter
description.
mhaType of MHA - When passive mode "other"
type MHA is used, Uplink delay needs to be
defined other cases keep empty.
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in
RNC GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name -
Table 140: Uplink delay
wmhConnector (WMH connector)
Parameter
nameWMH connector
Abbreviated
namewmhConnector
3GPP name -
Managed
object
MHA
Parameter -
7/22/2019 MHA Parameters
37/38
group
Category -
Multiplicity 1
Description
Defines the MHA connector in question of
WMHC and TMARET MHA types. The optionsare BTS1 (Pass-through) and BTS2 (Power) for
WMHC, NODEB0 and NODEB1 for TMARET
MHA types. If other than WMHC or TMARET
MHA types are used then wmhConnector
parameter value is None
RangeNone (-1), BTS1 (0), BTS2 (1), NODEB0 (2),
NODEB1 (3)
Step -
Unit -
Formula for
getting internal
value
gui ==> internal
None ==> -1
BTS1 ==> 0
BTS2 ==> 1
NODEB0 ==> 2
NODEB1 ==> 3
Default value BTS1 (0)
Default value
notes-
Related
functions-
Systeminformation
-
Modification BTS restart needed
Related
parameters-
Parameter
relationships-
Feature
dependencies-
Interfaces
EM WBTS WBTS RAC RAC RACApp
References -
Location in
RNC GUI-
RAC DB Table -
RAC DB
Column-
RAC user
interface name -
7/22/2019 MHA Parameters
38/38
Table 141: WMH connector