Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Metro Graduate
1234 Denver St. Aurora, CO 80010 [email protected] 303-000-0000
OPERATIONS, PRODUCTION, LOGISTICS & PROJECT MANAGEMENT
Twenty-year management career directing cost-effective, efficient and high-quality operations
Strong strategic planning, analysis, process and action planning skills
Keen problem-solving, decision-making and negotiating performance
Expert in team building, team leadership and organizational improvement
CAREER HIGHLIGHTS AND ACHIEVEMENTS
Operations Management & Leadership
• Currently responsible for planning, budgeting, technology and equipment resources, analysis and evaluation of
all maintenance requirements for a fleet of 550 aircraft (assets valued in excess of $12 billion). Restructured operations, optimized resources and reduced maintenance hours 5%.
• Directed consolidation of three independent operations with 500 personnel and $25+ million in capital assets. Brought new organization fully operational three months ahead of schedule with a 96% efficiency rating.
• Project managed, with Boeing Aircraft, a $3.4 million rebuild of severely damaged aircraft. Overcame
significant equipment, technology, logistic and personnel issues to deliver project three months ahead of schedule and 19% under budget. Won an Air Force Commendation Medal for project performance.
• Chaired Process Action Team investigating the cause of several safety incidents. Developed daily supervisory process to strengthen organizational training and leadership competencies. Resulted in a 40% reduction in
personal injuries and accidents.
Logistics Planning & Management
• Directed operational test and evaluation of new/modified aircraft systems for Air Support Command; recognized as the Command’s Operational & Logistics Manager/Director of the year in 2006.
• Identified a major design interface problem with a new air refueling pump system, designed test and failure analysis plans, created feasible solution and saved more than $17 million.
• Led a $64 million operational testing and evaluation program (first-ever aviation application) to determine the viability of magnetic bearing cooling turbine technology.
• Won the “Air Mobility Command (AMC) Award” in 1995 for significantly improving cost effectiveness of AMC operations. Contributed to more than $200 million in total cost savings.
Maintenance, Quality & Safety Management
• Reengineered an organization with 12 consecutive 70% or less safety and quality ratings, introduced a formal quality and safety management function, integrated measurable performance standards and achieved 8
consecutive 99%+ ratings.
• Planned, staffed, budgeted and directed maintenance activities for 175+ military and civilian personnel supporting field operations worldwide.
• Supervised launch and recovery of 83 aircraft refueling sorties. Reduced deployment time 60% while achieving/maintaining a 100% effectiveness rating.
• Conducted classroom and on-site technical instruction to qualify American and foreign maintenance personnel
in the skills, knowledge, technology and techniques required to maintain aircraft.
Metro Graduate [email protected]
PROFESSIONAL EXPERIENCE
UNITED STATES AIR FORCE 1995 to Present
Promoted frequently based on consistent contributions to productivity and efficiency improvement, quality management and cost reduction. Supervisory responsibility for up to 45 personnel. Budget responsibility for up to
$310 million annually. Asset responsibility for $100+ million in facilities, vehicles, hazardous materials, support
equipment, aircraft and spare parts. Purchasing authorization for up to $13 million.
Air Mobility Command Liason 2012 to Present
• High-profile leadership position as one of only seven senior personnel responsible for aircraft maintenance
programs and liaison affairs between the US Air Force and technology/equipment manufacturers worldwide.
• Challenged to restructure, streamline and expedite operations to reduce serious downtime problems and improve operating processes. Rewrote 40% of maintenance specifications, expedited workflow and identified
cost savings totaling $12+ million.
• Member of Technical Evaluation Team for $1.7 billion, 9-year contract awarded to Boeing. Facilitated transfer from in-house to contract operation, transferred from California and Texas, and saved $638 million in taxpayer dollars.
Test & Evaluation Manager 2009 to 2012 Maintenance Production Manager / Aircraft Supervisor (2002 to 2004)
• Full operating and supervisory responsibility for up to 170 maintenance, logistics, technical and support personnel and more than $41 million in aircraft assets.
• Transformed field service from a team-based organization into a specialization function to better utilize personnel resources. Resulted in more than 80% reduction in operating expenses.
Aircraft Instructor / Master Instructor 2003 to 2007
Aircraft Maintenance Technician 1996 to 2003 Air Freight Specialist (1989 to 1991)
• Promoted rapidly based on strong technical, supervisory, training and project management skills.
• Trained more than 300 technical personnel. One of a select number of instructors managing technical training programs for foreign Air Force personnel.
METROPOLITAN STATE UNIVERSITY OF DENVER 2004 to Present
Adjunct Faculty Member – Logistics Management
EDUCATION AND PROFESSIONAL CERTIFICATIONS
Embry-Riddle Aeronautical University
MS – Aeronautical Science (GPA 3.7/4.0) 1999
Metropolitan State University of Denver
BS –Aeronautical Sciences (GPA 3.5/4.0) 1996
FAA Mechanic Certification; Airframe & Powerplant Ratings Department of Defense Level One in Acquisition Logistics
Department of Defense Level One in Test & Evaluation
METRO GRADUATE
[email protected] 303-000-0000
CAREER OBJECTIVE
A full time software engineering position with a company seeking strong analytical, coding and debugging skills
TECHNICAL SKILLS
Programming: Operating Systems: Network Technologies:
C++, Java, Servlets, XML, PHP Unix, Mac OS and Windows. TCP/IP, SS7 protocol stack
EDUCATION
North Carolina State University, Raleigh, NC Master of Science, Computer Science, 2009 GPA: 3.4 on a scale of 4.0 Metropolitan State College of Denver, Denver, CO Bachelor of Science, Computer Science, 2007
EXPERIENCE
Ardent Systems Research Triangle Park, NC 6/2009 - Present Firmware Developer/Intern
• Worked closely with the senior engineer on the firmware of a raman spectroscope used to detect and analyze the chemical composition of pharmaceuticals. Interfaced the unit with desktop PC's running XP and Vista ahead of schedule.
• Designed a shell interpreter with syntax similar to UNIX C-shell using C on Linux for the calibration of a measurement instrument.
ACTIVITIES AND AWARDS
Placed 2nd in ‘Overnight Project Design’ competition held at the technical fest organized by the Department of Computer Science, University of Delhi Awarded Best Performer – Ardent Systems junior developer contest Elected as an Executive Member of the student’s informatics society
COURSEWORK
Operating Systems Computer Networks Computer and Network Security Design & Analysis of Algoritims Advanced Network Security Embedded Systems Design Advanced Data Structures Operating Systems Security Parallel Systems
WORK AUTHORIZATION
F-1 visa status, Republic of India citizenship, eligible for full time employment.
Metro Graduate [email protected] 303-000-0000
Webmaster/Software Developer TECHNICAL QUALIFICATIONS:
• Experienced Webmaster & Developer working with state-of-the-art Web and Windows technologies.
• Performed creative and technical design, development and delivery of a major website.
• Proficient with HTML, MS Office, FrontPage 2000 and all Windows programs.
• Outstanding communication, organizational and project management skills.
TECHNOLOGY EXPERIENCE:
Assistant Webmaster 6/2009 to Present
TransGlobe Communications
Los Angeles, CA
• In concert with the webmaster, orchestrated design, development and launch of TransGlobe website (www.transglobe.org). Helped perform the development from concept through full-scale global
implementation and all subsequent website upgrades and enhancements.
• Created and launched first-ever TransGlobe Communications Webcast (viewed by 2,000+ members live and
archived).
• Developed and currently publish electronic newsletter “E-Lines” with 4000 subscribers worldwide.
• Designed and currently maintain the online Discussion Board with 1300 registered users.
• Write articles and submit photographs for publication in quarterly newsletter, “Union Update.”
• Consult/advise 20 Local Council Presidents on a variety of communication issues (e.g., member communications, crisis communications, industry information, national union affairs).
Volunteer Communication Coordinator 9/2008 - 6/2009
Tech Counsel of LA
Los Angeles, CA
• Managed online newsletter design and content for local distribution to 500+ council members.
• Consulted with Local Council President on communication issues impacting local members.
OTHER EMPLOYMENT EXPERIENCE
Computer Department Associate - Best Buy 1/2008 - 9/2008
Volunteer Firefighter – LA Station 533 2007 - Present Hostess – Disney Land Summer, 2007
EDUCATION
Website/Webmaster Training, TechCenter, Inc., Los Angeles, CA (5/2009) Coursework: HTML Coding & Tables, Meta-Tags, FrontPage 2000, WYSIWYG, Website Promotion
Bachelor of Science in Communications, Metropolitan State University of Denver (9/2008)
Coursework: Organizational Communication Technology, Communication Strategies
METRO STUDENT
[email protected] 303-000-0000
SUMMARY OF SKILLS
Estimating and proposal preparation Project planning and management
Surveying and site preparation Subcontractor control
AutoCAD, Timberline, Prolog, MS Office Suite Building codes, compliance and OSHA safety
EDUCATION & TRAINING
Metropolitan State University of Denver, Denver, CO
Bachelor of Science Degree in Industrial Design September, 2009
Specialization Major: Construction Management
Center of Applied Technology, Niles, IL
Certificate of Completion, Drafting, May, 2006
RELATED COURSEWORK
Intro to Analysis and Design Soil Mechanics
Analytical Mechanics I & II Wastewater Treatment
Civil Engineering Fundamentals Surveying
Construction Project Management AutoCAD
Cost Estimating & Control Design of Reinforced Concrete
Structural Engineering Materials of Construction & Lab
RELATED EXPERIENCE
Illinois State Department of Transportation Chicago, IL
Structural Design Intern Summer, 2009
▪ Assisted the engineering department with project take-offs, cost estimates, contract documents, letters, and
transmittals. Was commended for accuracy and quickness by the P.E.
▪ Performed a large scale stress analysis of an aging bridge and made recommendations for repairs which
were scheduled to be performed.
▪ Helped design site plans, grading plans, and plan and profile drawings. Made site visits to various
construction projects and wrote field reports.
▪ Researched design standards and standard sizes for construction specifications and custom designs for
technical project needs.
OTHER EXPERIENCE
Badger Meter, Inc. Aurora, CO
Quality Inspector 1/2008 - 3/2009
▪ Performed final inspection and pressure testing on a variety of mechanical and electro-mechanical
assemblies with projected life cycles in excess of thirty years.
▪ Introduced a sampling technique that saved over 10% in time spent on the test bench. This was adopted by
two other plant locations.
ACTIVITIES
Metropolitan State University of Denver Varsity Soccer, Sweeper, 2008 and 2009 seasons
Youth football coach, Glenview Junior High School, 2006 and 2007
Habitat for Humanity, Project Coordinator/Volunteer
METRO GRADUATE
[email protected] 303-000-0000
EDUCATION Metropolitan State University of Denver, Denver, CO Bachelor of Science in Civil Engineering Technology - currently enrolled in night school program
Anticipated Graduation, September, 2012
Ivy Tech Community College, Fort Wayne, IN
Associate of Applied Science Degree, May, 2009 GPA: 3.65/4.0
OTHER TRAINING
OSHA Construction Safety and Health (30 hour course) - Certification
Indiana Building Association, Compliance Workshop Landscape Design Seminar, American Society of Landscape Design
COMPUTER SKILLS
AutoCAD Microsoft Office Suite 2007
Primavera Sure-Trak Timberline
QuickBooks ProLog
EXPERIENCE
Evergreen Construction Evergreen Construction was merged with Walbridge Homes and the headquarters was moved to Auburn.
Foreperson, 3/2007 - 5/2008
• Provided direct supervision of sub-contractors and tracked construction activities at residential job sites in the Fort
Wayne area.
• Controlled the permitting process and the ordering and delivery of materials to job sites.
• Gained experience reading blueprints and making change orders to satisfy customers.
• Residential team achieved an A+ rating by the local building association for the year 2007.
• Managed schedules and became proficient at many hands-on building activities such as framing, drywall installation, interior painting and appliance installation to help meet deadlines.
• Worked closely with the bookkeeper on making sure that all payments were properly posted and each project met margin goals.
Estimator, Fort Wayne, IN, 1/2006 - 3/2007
• Developed estimates for residential construction projects ranging from $25,000-100,000 using Timberline software. Projects included garages, remodels and additions.
• Achieved a 87% on-or-below-budget rating for all projects in the 2006 - 2008 timeframe (approx. 43 projects).
• Automated the process of sending out bid invitations using online tools.
• Performed take-offs from design documents in an organized clear and consistent method, finding coverage from subcontractors, determining estimates when no coverage was available.
• Provided support for lead estimators during the buyout phase on projects that we were awarded.
ACTIVITIES AND AWARDS
Top Design Finalist in the Kitchen Design Competition, Parade of Homes, 9/2008 Fort Wayne Race for The Cure, Volunteer Organizer, 2007, 2009
Habitat for Humanity, Volunteer, 2009 Fort Wayne Soapbox Derby Competition, Participant, 2004
Indiana Historical Society, Restoration Team Member, 2004-2007
METRO STUDENT [email protected] 303-000-0000
PROFESSIONAL QUALIFICATIONS
• 15+ years of increasingly responsible experience in Public Works & Civil Engineering Projects for the Darden County Government (Texas).
• Outstanding skills in project design, engineering, cost estimating, scheduling and CPM. Skilled PC user.
• Equally extensive experience in field project management and crew training/leadership.
• Supervisory responsibility for up to 12 design, estimating, field and project management personnel.
• Strong negotiations, communications and persuasion skills. Able to effectively communicate complex
engineering concepts, plans and programs to non-technical personnel.
• Excellent engineering qualifications across all core disciplines – civil, mechanical, environmental,
hydraulic, sewage and geotechnical.
PROFESSIONAL EXPERIENCE
DARDEN COUNTY GOVERNMENT Humble, Texas
2004 to Present
Senior Engineer – Engineering Division (2009 to Present) Direct the design, quality control, signing and sealing of construction drawings and project manuals for
in-house design projects, including roads, drainage studies, parking facilities, detention systems and other
civil works improvement projects for competitive bidding.
• Lead a team of five engineers responsible for complete project design and documentation.Directed 10+ consulting engineering designed projects within first 10 months with a total investment of more
than $8 million. Full responsibility for project scheduling, quality, cost, constructability and control.
Bond Project Engineer – Engineering Division (2007 to 2009)
Project Manager for major roadway improvements projects.
• Negotiated with consulting engineering firms for engineering fees, project schedule, quality control,
constructability and engineering services (e.g., environmental, surveying, geotechnical, hydraulic).
• Managed 25 major projects with a total investment of $40+ million. Delivered all projects on-time and
within budget. Projects were all bid within 2% of all cost estimates.
Manager of Inspections – Permit Division (2006)
• Trained and directed a team of 7–15 inspectors responsible for field inspections and evaluations of
various development projects throughout the County.
• Extensive documentation and regulatory reporting.
Manager of Enforcement – Permit Division (2005 to 2006)
• Consulted with violators of County developmental regulations to bring them into compliance.
• Presented technical engineering information to County Attorney’s Office to support legal actions and civil litigation.
• In addition, filed complaints in the Justice of the Peace Courts for non-compliant sewage systems/operators.
Plan Checker – Permit Division (2004)
• Reviewed drawings for compliance with approved drainage area maps and assessed utility work for right-of-way conflicts and compliance issues.
• Designed private sewage facilities in accordance with state regulations.
Metro Student [email protected]
TALBOT ENGINEERING COMPANY Houston, Texas
Staff Engineer- Geotechnical Engineering Projects 2003
• Promoted through a series of increasingly responsible positions managing the design, permitting, documentation, quality and construction of infrastructure development, civil works and economic
development projects for a major metropolitan county with more than 2 million residents.
• Conducted field inspections to ensure compliance with project plans and client specifications, and on-site inspections of concrete batch manufacturing plants.
• Reviewed results of materials testing and advised clients of compliance or non-compliance with
required specifications.
UNITED STATES ARMY 1992 to Present
Promoted through a series of increasingly responsible positions managing the design, permitting, documentation,
quality and construction of infrastructure development, civil works and economic development projects for a major metropolitan county with more than 2 million residents.
Army Reserve Officer / Enlisted – U.S. Army Reserves (2003 to Present)
• Rotated through a series of positions in Civil Engineering.
• Designed plans, coordinated CPM and project scheduling, allocated equipment and materials and oversaw field construction projects.
• Concurrently, taught surveying and materials testing (asphalt, concrete and soils)Engineer Brigade Construction Engineer and Highway Engineer for the Operations Officer for the 420th Engineer
Brigade. Responsible for design work, layout and area study for drainage system design for a multimillion-dollar expansion to the hospital at Fort Polk, Louisiana.
• Company Commander for three years, responsible for training and readiness of a heavy construction company of approximately 160 personnel. Full supervisory and leadership accountability.
Officer – Active Duty – U.S. Army Corps of Engineers (1992 to 1994) Designed and directed millions of dollars in construction projects at sites nationwide. Full responsibility for
project staffing, materials, equipment, tasks, schedules and critical paths (CPM).
• Advised Assistant Division Commander on all engineering matters related to the remediation and
clean-up of potential nuclear or chemical accidents.
• Supervisory responsibility for up to 17 personnel
• Appointed Project Officer for 21 building renovations (valued in excess of $75 million).
• Designed trestle bridges and directed field construction.
• Managed all design and construction for major renovation at Fort Ord, California.
EDUCATION
BS – Civil Engineering Technology – Metropolitan State University of Denver, CO 2002
Graduate, U.S. Army Engineer Officer Advanced Course, 1995 Graduate, U.S. Army Atomic Demolition Munitions Course, 1993
Graduate, U.S. Army Engineer Officer Basic Course, 1992
HEALTH GRADUATE
1234 Denver St. Aurora, CO 80010 [email protected] 303-000-0000
LICENSURE/CERTIFICATIONS
Register Nurse, State of Colorado, Current American Heart Association, BLS, PALS Certified Family Nurse Practitioner, September, 2009 Member, Sigma Theta Tau Honor Society of Nursing
ACADEMIC BACKGROUND
Metropolitan State University of Denver, Colorado - Bachelor of Science in Nursing, December, 2008
CLINICAL EXPERIENCE/PRACTICUM
Adult Care Provider/Intern Summer, 2009 Lexington Community Hospice, Lexington, KY
• Participated in all aspects of assisted care including dispensing medicine, bathing, dressing, feeding and monitoring vital signs
• Under the guidance of the center's occupational therapist, gave patients physical exercises to increase strength and dexterity and to encourage interaction
• Assisted in the evaluation of pain medications for cancer patients and made recommendations based on observed needs
• Overcame Alzheimer's related communication barriers by addressing individual needs and developing a set of symbolic gestures. This was documented and shared with the department.
RELATED EXPERIENCE
Home Care Provider May 2007 - August 2008 A Little Help From Your Friends, Villa Hills, KY
• Developed activities and outings that inspired cognitive and social stimulation
• Offered emotional support to clients and their families and helped to educate them on medical topics
• Aided clients with transportation, appointments, shopping, cooking, and housework
• Received a 97% rating and got a commendation for meeting all requirements
Counselor Summer, 2006 YMCA of Villa Hills, Villa Hills, KY
• Performed a variety of camp and counseling activities for K-6 children
• Tutored special needs children on a variety of topics to include math and science
• Developed several athletic contests and received 100% participation
KEY STRENGTHS AND SKILLS
Assessment - Develop rapport with patients and family Planning - Identifies patient needs and astutely determines priority of patient care Implementation - Performs based on scientific nursing care and evidence based practice Evaluation - Documents logically, succinctly and clearly demonstrating superior accuracy Excellent computer skills including the full Microsoft Office Suite and various types of healthcare databases
COMMUNITY INVOLVEMENT
American Red Cross – Frequent Blood and Platelet Donor Lexington County Rescue Mission – Serving the Homeless
HE AL THC A RE PRA C T IT IONE R , RN BSN
303-000-0000 [email protected]
SKILLS SUMMARY
• Experience working in multicultural environments.
• Proven ability to build positive relationships with patients, family members, and other healthcare
professionals.
• Effective oral and written communication skills.
• Strong pharmacology background. Interest in holistic and preventive medicine.
• Basic Spanish proficiency.
EDUCATION
Metropolitan State University of Denver, Colorado
Bachelor of Science in Nursing, Anticipated graduation, 5/2013 GPA: 3.87
CERTIFICATIONS
• CO RN License Number RN1390835
• BLS for Healthcare Providers (CPR & AED) Program
• Neonatal Resuscitation Program (NRP) Provider
• CPR certified, American Heart Association, valid through July 2010
EXPERIENCE
Nurse Extern , Denver General Hospital, Denver, CO, Summer, 2009
Worked under the supervision of an MD providing bedside care, treatment and clinical documentation for
patients on neurology, oncology, and medical-surgical floors.
Research Assistant, Dallas VA Hospital, Dallas, TX, Summer, 2008
Provided direct assistance to the H1N1 flu coordinator by arranging appointments, performing tests, collecting
data and documenting results.
OTHER EXPERIENCE
Counselor, Denver Campaign to Prevent Teen Pregnancy, 1/2007 - 1/2009
Provided counseling and instruction to at-risk teens in 3 Denver area high schools.
Student Assistant, MSU Denver Department of Behavioral Sciences, 5/2007 - 4/2008
Provided assistance to the Program Coordinator for a series of domestic violence workshops.
AFFILIATIONS
Hispanic Health Initiative Scholar
Member, American Student Nurses Association
Phi Kappa Tau Medical Fraternity
OTHER
• Skilled at learning new concepts quickly, working well under pressure, and communicating ideas
effectively.
• Exhibits sensitivity, maturity and flexibility in coping with difficult situations.
• Future goals include pursuit of BSN degree and CDE certification.
Healthcare Employee
303-000-0000 [email protected]
CAREER OBJECTIVE
Clinical Nurse / Charge Nurse PROFESSIONAL SKILLS AND QUALIFICATIONS
• Nine years’ experience as a Clinical Nurse, Charge Nurse & Nurse Trainer.
• Extensive experience in administering pharmaceutical products and compounds for general medical care, orthopedic care and OB/GYN care. Familiar with orthopedic devices, appliances and prosthetics.
• Skilled public speaker, trainer and professional presenter with outstanding communication skills.
• Contributed to the efficacy and quality of patient care through extensive committee participation. PROFESSIONAL EXPERIENCE
MIDWEST HEALTH Centennial, CO 2010 to Present RN III / Charge Nurse – Labor & Delivery – Arkansas Baptist Hospital (2011 to Present)
• Charge Nurse for 22-bed Labor & Delivery Unit.
• In addition to direct patient care responsibilities, coordinate nurse staffing and on-the-job training, precept newly hired nursing staff and rotating nursing students, represent the Unit at professional conferences and serve as a resource person to all nursing staff.
Member: Lifecare Committee, Caesarean Section Committee, Council for Excellence, Interdisciplinary Team
RN II / Charge Nurse – Orthopedics – Little Rock General Hospital (2010 to 2011)
• Charge Nurse on a 45-bed Orthopedic Unit.
• Coordinated patient care with physicians, nursing staff, allied health care professionals, and other clinical care/clinical support personnel.
• Provided general nursing care and instruction, maintained patient documentation, coordinated medication administration, and provided specialized nursing care to meet patients’ specific orthopedic requirements.
EDUCATION
Candidate for BS in Nursing, 2012 to Present BS in Nursing, 2010 METROPOLITAN STATE UNIVERSITY OF DENVER, CO, 2008 Certified in ACLS, RN, CPR FRONT RANGE COMMUNITY COLLEGE, Westminster, CO
VOLUNTEER CONTRIBUTIONS
• Disaster Relief Nurse, El Salvador and Mexico
• Volunteer Nurse, United Way of Arkansas
• Volunteer Coach, Youth Soccer Teams
H E A L T H C A R E S U P P O R T
303-000-0000 [email protected]
S K I L L S P R O F I L E
• Excellent people skills and thrives on helping to solve problems
• Superb communication skills, verbal and written
• Strong attention to detail and proficient at running and handling office equipment
• Good filing, charting, documenting and organizational skills, along with other office requirements
• CPR and First Aid certified, experienced WITH residents and clients with activities of daily living
• Experienced in blood drawing, performing lab tests, EKG’s, assisting nurses and doctors, taking vitals, and
giving injections
• Efficient in billing and coding, and excellent computer skills
E D U C A T I O N
Metropolitan State University of Denver, Colorado
Bachelor of Science in Biology candidate, anticipated May 2016
DeGoot Institute, Charlotte, NC, Registered Medical Assistant, July, 2008
American Red Cross, Certified Nursing Assistant, 2005
R E L A T E D E X P E R I E N C E
Medical Assistant, Dewey, Fixem & Howe, Internal Medicine Denver, CO 1/2007 - Present
• Performed vitals, drew blood, performed EKG’s, various lab tests, and injections
• Efficient filing, charting, and documenting
• Assisted doctor with examinations and procedures
• Performed billing and coding via the computer’s internet, created referrals, appointment scheduling, took incoming calls and messages while running front desk
Receptionist, Home Care Providers of the Triangle Chapel Hill, NC 2/2005 - 1/2007
• Answered phones and greeted customers. Directed calls to the appropriate designations
• Sorted and forwarded mail and performed various errands for the doctors and nurses
T R A I N I N G
• Operation and maintenance of bio-medical equipment
• Medical terminology and medication administration skills
• Maintained sterile fields and application of dressings
• Catheter training (foley and straight cath.)
• Suction training (closed tracheostomy, open tracheostomy, nasotracheal)
• Wound documentation and dressing care
• Specimen collection (urine, feces, sputum)
• Pre-operative and post-operative patient care and monitoring; Charting and documentation of patient care
• Acute and long-term care experience
• PC and Microsoft Office literate
V O L U N T E E R A C T I V I T I E S
Habitat for Humanity, Race for the Cure, united Way
Healthcare Support
303-000-0000 [email protected]
Profile
• Physical Therapist Assistant with 3 years of clinical experience in home care, sports medicine, outpatient, inpatient and
acute care settings.
• Recognized for working and communicating effectively with other health care professionals, staff and especially patients
and their families.
• Proven ability to work with minimal supervision.
• Volunteered with the Wisconsin Special Olympic Games; provided one-on-one support and assistance to physically
challenged children.
EDUCATION
Metropolitan State College of Denver, CO, 2004
Bachelor of Science in Biology
Medical College of Wisconsin Milwaukee, Wisconsin, 2006
Associate in Applied Science - Physical Therapist Assistant Clinical Experience
• Acute Care: Columbia St. Mary’s – Milwaukee (240 hours)
• Outpatient Rehabilitation/Sports Medicine: Aurora Rehabilitation Center – Milwaukee (240 hours)
• Inpatient Rehabilitation: Elmbrook Memorial Hospital – Milwaukee (80 hours)
Clinical Skills
Treatment Modalities & Related Responsibilities
• Ultrasound • Manual techniques including stretching & soft tissue
• Electric stimulation • Gait training
• Cervical and lumbar traction • Patient transfers
• Fluidotherapy • Patient education
Patients & Diagnoses
• Geriatrics • Gunshot and other wounds
• Cerebral vascular accidents • Total joint replacements
• Traumatic brain injuries • General deconditioning
• Spinal cord injuries • Amputees
• Parkinson’s disease • Burns
• Multiple sclerosis • ICU
Relevant Employment
Aurora Visiting Nurse Association Milwaukee, Wisconsin 2006 - Present
Home Care Physical Therapist Assistant
• Provide physical therapy to patients in their homes.
• Communicate with medical care providers from multiple disciplines.
• Provide customized development and progression of home exercise programs.
• Instruct caregivers in use of assistive devices and how to assist with exercise programs to maximize patient recovery.
• Conduct home safety evaluations and make recommendations to patients and families.
• Contracted through Critical Connection (2006–2007) and TherxServices (2007–Present).
Professional Affiliations
• American Physical Therapy Association – Member
• Medical College of Wisconsin Physical Therapist Assistant Club – former President
Industrial Engineer
303-000-0000 [email protected]
Education
B.S. Mechanical Engineering Technology, 05/2007
Metropolitan State University of Denver, Cum Laude, GPA: 3.73
Relevant Coursework
Advanced Statistical Quality Control, Engineering Administration, Statistical Quality Control and Reliability, Operations Research, Methods and Industrial Ergonomics, Production & Inventory Control, Industrial Systems Simulation
Related Experience
Industrial Engineer Apprentice, Partman Automotive, Inc., Canton, OH, 8/2008 - 7/2009
• Decreased lead time 53% by reducing material handling travel distances
• Improved quality 40% by implementing shipping packing cells
• Implemented lean manufacturing tools such as 5S, visual management
• Improved facility plant layout by applying layout principles
• Maintained documentation (procedures and work instructions)
• Established work procedures and time standards
• Studied time, motion, and methods of operations
• Improved workstations by applying ergonomics principles
Industrial Engineer Intern, General Motors, Detroit, MI, 4/2008 - 8/2008
• Created station layouts leading to a process flow improvement of 10%
• Updated plant master layouts and implemented 5S and workplace organization helping to reduce overhead
• Created standard task sheets and work orders
Technical Skills
MS Office Suite, Minitab, AutoCAD, FactoryCAD, FactoryFLOW, LayOPT, Blocplan, Spiral, SAP, Arena, Maynard MOST, SolidWorks, Photoshop
Awards
The Boeing Company Scholarship [2007-2008] HENAAC / Ford Motor Company Scholarship [2007-2008]
HACU / General Motors Scholarship [2007-2008] Xerox Technical Minority Scholarship [2007-2008]
General Motors MES Scholarship [2006-2008] NACME Scholarship [2006-2008]
National Science Foundation Scholarship [2005-2007]
Member of Alpha Pi Mu Industrial Engineering Honors Society [2007-present] Member of Tau Beta Pi Engineering Honor Society [2006-present]
Other Qualifications
• Responsible and detail oriented
• Independent learner and self-motivated
• Work well under stress
• Skilled in problem solving, analysis, innovation
Mechanical Draftsperson
303-000-0000 [email protected]
Seeking Internship Experience in Drafting and Mechanical Engineering
PROFESSIONAL SKILLS PROFILE
Engineering, Drafting & Design Project Planning & Management Mathematical & Statistical Calculations Facilities Engineering & Maintenance Customer/Account Proposals Group Presentations & Public Speaking Computer Modeling & Analysis Specifications, Reporting & Documentation Hydraulic & Pneumatic Systems Process Improvement & Optimization
Proficient with Microsoft Word, Excel, PhotoShop and AutoCAD.
PROFESSIONAL EXPERIENCE
PLANTECH, INC. Durham, NC September 2008 to May 2009 (Designer/manufacturer of automated conveyor systems & technologies)
Assistant Detailer/Draftsperson (part-time)
• Member of 8-person product design and engineering team responsible for new product designs as well as enhancements to existing products, systems and technologies.
• Prepared detailed assembly drawings for on-site production and created computer models from sketches and antiquated drawings.
• Worked independently with little or no direct supervision.
DALEY CONFERENCE CENTER Raleigh, NC January 2007 to August 2008 (1400-acre meeting & professional conference center)
Groundskeeper (4/2008 - 8/2008)
• Fast-paced position managing facilities and grounds and assisting the Superintendent
• Involved in the planning and on-site supervision of both new construction and renovation programs.
• Participated in evaluation and selection of vendor proposals for new systems installations (e.g., plumbing, heating, ventilation, fire suppression).
Outdoor Education Instructor (1/2007 - 4/2008)
• Designed and led outdoor education and mountaineering programs for children, teens and adults.
• Focused programs on enhancing cooperation, communication and leadership skills.
EDUCATION
BS – Mechanical Engineering Technology 12/2013 Metropolitan State University of Denver
NURSING GRADUATE
1234 Denver St. Aurora, CO 80010 [email protected] 303-000-0000
ACADEMIC BACKGROUND
Metropolitan State University of Denver, CO Bachelor of Science in Nursing, September, 2012, GPA: 3.9/4.0
CLINICAL EXPERIENCE/PRACTICUM
Adult Care Provider/Intern Summer, 2012 Denver Hospice, Denver, CO
• Participated in all aspects of assisted care including dispensing medicine, bathing, dressing, feeding and monitoring vital signs
• Under the guidance of the center's occupational therapist, gave patients physical exercises to increase strength and dexterity and to encourage interaction
• Assisted in the evaluation of pain medications for cancer patients and made recommendations based on observed needs
• Overcame Alzheimer's related communication barriers by addressing individual needs and developing a set of symbolic gestures. This was documented and shared with the department.
RELATED EXPERIENCE
Home Care Provider, May 2010 - August 2012 A Little Help From Your Friends, Villa Hills, KY
• Developed activities and outings that inspired cognitive and social stimulation
• Offered emotional support to clients and their families and helped to educate them on medical topics
• Aided clients with transportation, appointments, shopping, cooking, and housework
• Received a 97% rating and got a commendation for meeting all requirements
Counselor Summer, 2009 YMCA of Villa Hills, Villa Hills, KY
• Performed a variety of camp and counseling activities for K-6 children
• Tutored special needs children on a variety of topics to include math and science
• Developed several athletic contests and received 100% participation
KEY STRENGTHS AND SKILLS
Assessment - Develop rapport with patients and family Planning - Identifies patient needs and astutely determines priority of patient care Implementation - Performs based on scientific nursing care and evidence based practice Evaluation - Documents logically, succinctly and clearly demonstrating superior accuracy Excellent computer skills including the full Microsoft Office Suite and various types of healthcare databases
LICENSURE/CERTIFICATIONS
American Heart Association, BLS, PALS, 2008-present Certified Family Nurse Practitioner, September, 2012 Member, Sigma Theta Tau Honor Society of Nursing, 2007-present
COMMUNITY INVOLVEMENT
American Red Cross – Frequent Blood and Platelet Donor Lexington County Rescue Mission – Serving the Homeless, 2010-present
Charge Nurse
1234 Denver St. Aurora, CO 80010 303-000-0000 [email protected]
PROFESSIONAL SKILLS AND QUALIFICATIONS
• Extensive experience in administering pharmaceutical products and compounds for general medical care, orthopedic care and OB/GYN care. Familiar with orthopedic devices, appliances and prosthetics
• Skilled public speaker, trainer and professional presenter with outstanding communication skills
• Contributed to the efficacy and quality of patient care through extensive committee participation
PROFESSIONAL EXPERIENCE
MIDWEST HEALTH, Little Rock, AR 2000 to Present
RN III / Charge Nurse – Labor & Delivery – Arkansas Baptist Hospital (2005 to Present)
• Charge Nurse for 22-bed Labor & Delivery Unit
• In addition to direct patient care responsibilities, coordinate nurse staffing and on-the-job training, precept newly hired nursing staff and rotating nursing students, represent the Unit at professional conferences and serve as a resource person to all nursing staff
Member: Life Care Committee, Caesarean Section Committee, Council for Excellence, Interdisciplinary Team
RN II / Charge Nurse – Orthopedics – Little Rock General Hospital (2000 to 2005)
• Charge Nurse on a 45-bed Orthopedic Unit.
• Coordinated patient care with physicians, nursing staff, allied health care professionals, and other clinical care/clinical support personnel.
• Provided general nursing care and instruction, maintained patient documentation, coordinated medication administration, and provided specialized nursing care to meet patients’ specific orthopedic requirements.
ARKANSAS STATE UNIVERSITY Little Rock, AR 2008 to Present
Clinical Instructor
• Plan, schedule, assign and instruct college-level nursing students rotating through the Labor and Delivery Unit at Arkansas Baptist Hospital.
• Maintain student records of performance, provide one-on-one training in specific nursing skills and facilitate successful completion of clinical rotations.
• Qualified ACLS Instructor.
EDUCATION
BS in Nursing, 2000 METROPOLITAN STATE UNIVERSITY OF DENVER, CO Certified in ACLS, CPR and NRP (Neonatal Resuscitation Program)
VOLUNTEER CONTRIBUTIONS
• Disaster Relief Nurse, El Salvador and Mexico
• Volunteer Nurse, United Way of Arkansas
Production Supervisor
303-000-0000 [email protected]
Summary
Team leader and member, proficient in sub and final assembly and test and inspection of electronic components, including printed circuit boards, wiring and other products.
Skilled in operating various hand tools and computerized machinery, including assembling and handling simple to complex production operations.
Employment History
DAVIS CORPORATION, Tulsa, OK (2005 to 2009) Quality Control Inspector / Shift Supervisor
▪ Inspected more than 340 boxes of electronic parts each day to ensure compliance to company standards.
▪ Recorded incoming and outgoing shipments as well as prepared items for shipment. Verified information against bills of lading, invoices, orders and other records.
CRAMER WIRE COMPANY Tulsa, OK (1998 to 2005) Electronic Assembler
▪ Assembled and built printed circuit boards and automotive parts (exhaust and intake for Ford cars) from blueprints/schematics, using soldering iron, gauges and various other hand tools.
▪ Operated exhaust machine and made minor repairs/adjustments to Bradley Allen computer to maintain production goals and minimize down time.
JOHNSON ELECTRONICS, INC. Tulsa, OK (1994 to 1998) Electronic Assembler
▪ Selected by management as lead person on production line, overseeing team of 16 assemblers.
▪ Provided training, guidance and ongoing support to assembly team members to achieve company productivity goals.
Education
Bachelor of Science, Electrical Engineering Technology, in progress Metropolitan State University of Denver
Chemical Engineer 303-000-0000 * [email protected]
Profile
• Well-qualified chemist with extensive experience in R&D, quality, field engineering and laboratory
processing
• Excellent verbal communicator; readily adapt communication style to technical level of audience to
facilitate understanding
• Industrious student who earned two bachelor’s degrees while simultaneously working part-time
• Personal qualities: Analytical, precise, thorough, curious, patient, independent
Professional Experience
3M St. Paul, Minnesota
Senior Chemist / Lab Manager (2000 - 2011)
• Assigned to Industrial Adhesive Division to conduct research and design (including production
simulation) of adhesives used in packaging materials.
• Provided support to sales representatives. Frequently requested by reps due to product expertise and
ability to understandably communicate about technical issues with customers.
• As field engineer, delivered extensive onsite technical product support to customers, primarily General
Foods in its 32 plants nationwide. Analyzed problems; developed and implemented solutions. Interacted
with and provided instruction to plant personnel.
Cambrex Charles City, Inc. Charles City, Iowa
Chemical Quality Assurance Technician (1999 - 2000)
• Performed quality testing in the human pharmaceutical division.
• Appointed to serve as laboratory Safety Coordinator.
Cargill, Inc. Minneapolis, Minnesota
Chemist/Research Summer Intern (2000)
• Conducted research regarding the structural and chemical characteristics of agglomerated starches and
parent starches, as well as Glatt spray-drying techniques for agglomeration processes.
Education
Metropolitan State University of Denver
Bachelor of Science in Chemistry (2000)
• President & Treasurer, Purdue Chapter – American Chemical Society
• Member, Purdue Student Chapter, American Institute of Chemical Engineers
• Phoenix Award Winner, National American Chemical Society Organization
Technical Inventory
• HPLC (Millennium Chromatography Manager) • TLC
• GC (Turbocrhom Chromatography System) • IR
• Column Chromatography • UV - Vis
• Karl Fischer Titrimeter • pH
• Density meter instrumentation • Microsoft Office
INDUSTRIAL ENGINEER
303-000-0000 [email protected]
EDUCATION
Metropolitan State University of Denver Bachelor of Science in Industrial Design, Sept. 2009, GPA: 3.7/4.0
• Governor's Scholarship, 2007
RELEVANT COURSEWORK
Six Sigma Methodology Operations Research Information Technology
Statistical Methods Simulation Modeling Work Methods
Global Manufacturing Applied Decision Analysis Business Concepts
INTERNSHIP
Productivity Intern, General Electric Transportation Systems (GETS) Erie, PA Summer 2009
• Team member jointly responsible for the establishment and refinement of manufacturing processes for a new product for the locomotive braking systems unit. Perfomed time studies, line balancing and capacity
planning, flow diagramming and inventory control studies. Met scheduling and quality goals in the first month.
• Introduced processes that saved over 15 man hours per unit and reduced waste by 15%. This process became pivotal in meeting the final assembly requirements of cost per unit.
• Trained and supervised third shift machine operators in quality control documentation and recorded the program using PowerPoint for future use.
OTHER EXPERIENCE
Third Shift Supervisor - Final Test,, Electrolux Home Products Erie, PA 1/2006 - 12/2007
• Oversaw a team of 6 quality testers in the performance of final test procedures such as suction, vibration,
fit and finish.
• Trained them on documentation procedures and set up a process for quality improvement feedback to
suppliers of components.
TECHNICAL SKILLS
• Laboratory experience with methods of processing material: punching, plastic injection molding,
thermoforming, sand casting, sheet metal forming, extrusion, welding, polymer ma trix composites vacuum bagging
• Experience testing material properties of metals, polymer, ceramic, and composite materials using ASTM standards
• Use of Design of Experiments approach for estimation of process control factor effects and modeling of process quality characteristics
• Experience with Minitab statistics software to create control charts and determine process capability
• Familiar with Lean Manufacturing methods: JIT, ERP, TQM, and Kaizen Techniques
• Experience with ProModel simulation software to plan, design, and evaluate manufacturing situations
• Exposure with designing an automated system. In volved digital sensors, pneumatic/hydraulic devices,
PLC programming
• Excellent computer skills - hardware and software
MEMBERSHIPS / AFFILIATIONS
Institute of Industrial Engineers (IIE), Human Factors and Ergonomics Society (HFES), Key Club International
Distribution Manager
303-000-0000 [email protected]
OBJECTIVE Seeking an entry level position in supply chain management utilizing my education and training in the field
SKILLS SUMMARY
• Supply Chain Management • Warehouse Management
• Inventory Control Reductions • Lean Manufacturing
• On-Time Delivery Improvement • Transportation Cost Reduction
• Manufacturing Management • Process Control and Documentation
EDUCATION
Metropolitan State University of Denver, 2015
Bachelor of Science in Operations Management, GPS: 3.1/4.0
RELEVANT COURSEWORK
Strategic Supply Chain Management Transportation
Purchasing Management Business Marketing
Product Management Operations Management
Strategic Marketing Sales Administration
EMPLOYMENT HISTORY
Supply Chain Trainee 1/2009 - Present
Wholesale Distributors, Inc.
Cranford, NJ
• Developed spreadsheets for the analysis of transportation costs and identified the most efficient delivery methods
based on estimated time to delivery and bottom line cost
• Examined outgoing shipments to ensure shipment specifications were being met and helped create inventory
packing slips. Took responsibility for processing customer orders achieving a 100% on-time rating for the first time
at the facility.
• Shadowed management on strategic decisions about cost cutting and made recommendations based on seasonal
trend analysis, demand analysis and production capabilities
• Provided inventory forecasts and identified storage needs. Reduced backorders for specialty items by 15%
PROFESSIONAL MEMBERSHIPS
Member, American Purchasing and Inventory Control Society, (APICS)
Member, National Association of Purchasing Managers (NAPM)
Member: Duquesne University Finance and Economics Society, 09/2007 - Present
Sisterhood Chair, Delta Phi Omega Sorority Incorporated, 05/2008 – Present
CLASS PROJECTS
• RFID Reader Project, use tag programming tool to assign codes and interface alien reader
• Collect raw data from RFID tag data in real time and store it in SQL database
• Validate SQL, basic JavaScript and PHP scripts to connect on Apache web server. Design a simple inventory
management system to track SKU, quantity on hand, quantity on order with PHP scripts and mySQL.
TECHNICAL SKILLS
• Microsoft Office (Word, Excel, PowerPoint, Access)
• SAP Transportation Module and Epicor On Demand SCM Product Suite
• PHP, MySQL, Java, HTML and XML
Logistics Intern
[email protected] 303-000-0000
OBJECTIVE The Supply Chain Management Internship at Mary's Supply Chain Center, utilizing my education and strong analytical,
organizational, planning, and communication skills.
EDUCATION
Metropolitan State University Of Denver Bachelor in Science April 2013
Major: International Business and Transportation/Logistics, Current GPA: 3.25/4.0
RELEVANT COURSEWORK
• Logistics • Warehousing • Inventory Management
• Distribution • Purchasing • Quality Control
• Process Control • Accounting • Business Management
SKILLS
• Proficient use of Microsoft Office Suite including Microsoft Word, Excel, Access, and PowerPoint
• Proficient use of Vista, XP, ME, and email programs such as Outlook Express and Outlook 2007
• Knowledge of SAP, Manugistics, Moduslink and BPCS applications
• Use of Excel solver, Microsoft project management tools
• Ability to multitask to meet deadlines and is driven to exceed them
INTERNSHIP
Intermodal Intern, Landstar Global Logistics, Jacksonville, FL, Summer, 2009
• Coordinated the loading process and dispatched drivers to ensured timely, accountable and cost-effective delivery of
materials.
• Achieved a 99.7% "OTWI (on-time without incident) rating which was the highest ever recorded for an intern.
• Performed billing, invoicing and updated customers' contracts to ensure that all relevant records were accurate,
maintained and complete.
• Responsible for updating/maintaining customers, partners contracts and information. Made a recommendation for changing a screen on the CRM system which was implemented, saving significant data entry time.
OTHER RELEVANT EXPERIENCE
Administrative Assistant - Purchasing, Pier 1 Imports, Miami, FL, Summer, 2008
• Assisted the International Import Manager in scheduling, tracking and control of shipments from China. Performed regression analysis and created shipping reports for estimating TTS (time to shelf) of a wide variety of products.
Became a key resource for communicating with contacts.
• Was assigned added responsibilities for maintaining customs records because of ability to quickly learn International
Freight Forwarder software package.
CERTIFICATION & MEMBERSHIPS
American Society of Transportation and Logistics (ASTL)
• Certificate in Transportation & Logistics, 2012
Member, Professional Association of Industrial Distribution (PAID), 2009-present Member, Institute for Supply Management (ISM), 2008-present Member, American Purchasing and Inventory Control Society (APICS), 2008-2012
Manufacturing Support
[email protected] 303-000-0000
QUALIFICATIONS SUMMARY
Fifteen years’ progressively responsible experience in Manufacturing Support Operations.
• Trim Operations Management • Purchasing & Vendor Relations
• Scheduling & Project Coordination • Distribution & Transportation
• Personnel Training & Supervision • Supply Chain Management
• Quality Improvement & Control • Cost Reduction & Avoidance PC proficient with Microsoft Word & Excel. Strong planning, organizational and management skills.
PROFESSIONAL EXPERIENCE
TRC DESIGNS & PRODUCTIONS Key West, Florida 2010 to Present Trim Supervisor (2014 to Present) Cutting Room Set-Up Manager (2013-2014) Cutting Room Manager (2012-2013) Assistant to Cutting Room Manager (2011-2012) General Warehouseman / Spreader (2010-2011) Promoted rapidly within this women’s apparel manufacturer, as company has grown from $10 million in annual revenue to a peak of $165 million. Currently direct a staff of 7–9 in a high-volume, fast-paced operation supplying 100+ distribution locations throughout Mexico and Central America. Full responsibility for ensuring that all garments are properly trimmed prior to production distribution. Report to the Director of Operations.
• Developed and implemented centralized Trim Purchasing and Distribution Department for operations at 3 company-owned manufacturing facilities in 3 different states.
• Introduced a company-wide bulk purchasing program, renegotiated vendor contracts and eliminated third-party agents. Resulted in annual cost savings totaling more than $2.2 million (7% of annual operating costs).
• Redesigned logistics network and created regional distribution model that reduced costs 8.2%.
• Managed trim operations for almost 10 million garments annually. Consistently achieved/ surpassed all productivity, efficiency, quality and cost performance goals.
EDUCATION
BS – Political Science – Metropolitan State University of Denver, 2010 Certified in First Aid and CPR