Upload
hoangtuyen
View
330
Download
16
Embed Size (px)
Citation preview
Metro Cell Solutions Product PortfolioWireless Product Solutions
Rev. 2/2017 PRELIMINARY
This Ordering Guide and the information contained within is confidential and restricted for INTERNAL USE only. If you have received this Ordering Guide in error, any use, reproduction, or dissemination is strictly prohibited.
This page intentionally left blank.
For more information, visit commscope.com
CommScope MetroCell Solutons Ordering Guide Outdoor Small Cell Solutions
As data demands skyrocket, so does the demand for bigger capacity — and that means more cell sites in more places. But when zoning restrictions, site acquisition difficulties and “not in my backyard” local opposition make conventional cell sites unwelcome and unworkable, it’s time to think small.
CommScope MetroCell Solutions are the perfect fit in these challenging environments; providing high performance in capacity-sensitive, data-driven, dense urban environments where small size and low visual impact are imperative. CommScope offers a wide selection of solutions to choose from, with different heights, sizes and appearances to meet the needs of each unique situation.
CommScope offers several MetroCell solutions including but not limited to:
- Existing Pole Concealment Solutions - Stand-alone solutions designed to mount on existing poles and structures in right-aways.
- MetroCell Complete Site Solutions - Complete sites delivered by a single part number, providing everything except the RAN equipment.
- Wood Power Pole Concealment and Mounting Solutions - Mounts and concealments designed for power transmisison telecom wood and steel pole structures
Features• Employs state-of-the-art and patent pending technologies providing
excellent RF performance and efficient equipment thermal management
• Custom color and apearance options for those difficult zoning areas.
Benefits• Help meet regulatory restrictions and avoid neighborhood opposition
• Optional pre-tested, pre-assembled and certified before delivery forfaster, more efficient installation
• Offer potential lease savings compared to traditional macro sites
• Add capacity to improve data throughput, leading to increasedcustomer satisfaction
- Antenna Concealment Solutions - Concealment of panel antennas using state of the art soft-shell concealment materials for improved RF performance.
This page intentionally left blank.
MetroCell Solutions
MC-SP-WAE-17-002-01
SSC‐760224725
Wrap‐Around Radio Concealment Enclosure Pole-mounted enclosure for up to three 5W metro cell radios
Introduction
This document describes the CommScope wrap-around equipment concealment solution.
The wrap-around equipment concealment is specifically intended for use with 1-5 Watt metro cell radios connected via CPRI or GbE backhaul.
Enables attractive concealment and securing ofall site equipment on standard street lightingstructures
Accepts most manufactures’ 2W and 5W radiosas well as backhaul termination
Application
The CommScope wrap-around concealment is intended to be used with 1-5W metro cells and standard street lighting structures where low-visual impact is desired.
Highly-flexible configuration can house diplexers,arrestors, splitters, backhaul and powerequipment, etc.
Mounts to tapered and non-tapered poles of up to9-inches (228mm) in diameter
Single person installation
Convection cooled per GR-487 Requirements
System Dimensioning & Configuration
Height / Diameter 30.5 in. (775mm) / 27.0 in. (686mm)
Assumes pole diameter of 6 in. (140mm)
System Weight 60lbs. (27kg) with no radio equipment installed. Approx 120lbs (55kg) fully loaded
Approximate wind loading Max. 457 N (103 LBF) at 150 km/hr.
Min. / Max. Acceptable Pole Diameter 4.5-9 in. (113-203mm)
Finish UV-resistant powder coat; standard finish color is RAL 7035 light gray Additional colors available
• Zero ground footprint meets needs ofsmaller rights-of-way
• Eliminates unsightly cabling whileintegrating backhaul, AC distribution,protection and radios within a single,secure enclosure
• Supports up to three 5W metro cell radios
• Slide-In Diplxer and Surge Arrestormounting options
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
Power/Fiber Input 1” Trade Size Conduit Knockouts on the back and bottom of unit
Exclusions Not recommended for use with concrete or metal square poles unless specificstructural analysis is performed
Radio Mounting
Conceals and mounts the following radio configurations: (3) Nokia cMRO radios or (3) Ericsson mRRU/mRBS or (6) Ericsson 2203
Typical Line Drawing (diameter varies slightly depending on pole diameter)
MetroCell Solutions
MC-SP-WAA-16-001-00
SSC‐760205237 Wrap‐Around Antenna Concealment
Mid-pole Mount for (3) V65S-C3-1XR 65 Degree Panel Antennas
Introduction
This document describes the CommScope wrap-around antenna concealment solution.
The wrap-around antenna concealment is specifically intended for use with (3) V65S-C3-1XR panel antennas.
Enables mounting of three high-band dual portantennas on poles between 2.5-6 inches (63-153mm) in diameter
Screens antennas from view while complementingCommScope’s pole-mounted, wrap-around metrocell equipment enclosure
Quasi-Omni version includes (2) Low PIM 3-waysplitters and all associated RF cables.
Bottom Concealment cover to hide cabling andsplitters from ground level
Applications
The CommScope wrap-around antenna concealment is intended to address quasi-omni or 3 sector requirements when mounted below extension arms and luminaires on existing street lighting poles.
Single clamp arrangement permits installationfrom one side of pole
Can be used as a 3-sector antenna or suitsvarious 1-3 panel patterns through rearrangementsplitters
System Dimensioning & Configuration
Height / Diameter 39 in. (965mm) / 16.5 in. (419mm)
Assumes pole diameter of 3.0 in. (90mm)
Weight 38 lb. (17kg)
Approximate wind loading Max. 300 N (68 LBF) at 150 km/hr.
Min. / Max. Acceptable Pole Diameter 2.5-8 in. (65-203mm)
Mechanical Tilt Adjustment 4 Degree adjustment (-1 to +3 Degrees) to remove effect of pole taper
• RF Transparent UV-Resistant shrouds
• Aesthetic radome shrouds can bepainted to meet zoning requirements
• Mechanical down tilt adjustment toremove the effects of pole taper
• PIM tested to mounted specifications
MetroCell Solutions
MC-SP-WAA-16-001-00
Typical Line Drawing (diameter varies by pole diameter)
© 2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
MetroCell Solutions
MC-SP-RE-17-001-00
SSC‐760236114
Radio Concealment Enclosure Pole-mounted enclosure for radio and equipment concealment and protection
Introduction
This document describes the CommScope wrap-around equipment concealment solution.
The wrap-around equipment concealment is specifically intended for use with 1-5 Watt metro cell radios connected via CPRI or GbE backhaul.
Enables attractive concealment and securing ofall site equipment on standard street lightingstructures
Accepts most manufactures’ 2W and 5W radiosas well as backhaul termination
Application
The radio concealment enclosure is intended to be used with 1-5W metro cells and standard street lighting structures where low-visual impact is desired.
Highly-flexible configuration can house diplexers,arrestors, splitters, backhaul and powerequipment, etc.
Mounts to tapered and non-tapered poles
Single person installation
Convection cooled per GR-487 Requirements
Tamper-Resistant and Pad Lockable
System Dimensioning & Configuration
Height / Width / Depth 40 in. (1016mm) / 15.75 in. (400mm) / 12 in (305mm)
System Weight 40lbs. (18kg) with no radio equipment installed. Approx 80lbs (36kg) fully loaded
Approximate wind loading Frontal: 454 N (102 LBF) Lateral: 328N (73 LBF) at 150 km/hr.
Min. / Max. Acceptable Pole Diameter 4.5-9 in. (113-203mm) (Larger diameter poles by steel banding)
Finish UV-resistant powder coat; standard finish color is RAL 7035 light gray Additional colors available
Power/Fiber Input Conduit Back: (2) 1” Trade Size Knockouts. Bot: (2) 1 ¼” Trade Size Knockouts
• Zero ground footprint meets needs ofsmaller rights-of-way
• Eliminates unsightly cabling whileintegrating backhaul, AC distribution,protection and radios within a single,secure enclosure
• Supports multiple metro cell radios
• Integrated Diplexer and Surge Arrestormounting options
40.00
12 15.75
(5) 2.00 50.8 KNOCKOUTS FORCABLE ENTRY/EXIT(CROSS-CUT RUBBER GROMMETS INCLUDED)
SHOWN MOUNTED ON AN 8.00 POLECLAMP, STRAP, AND THRU BOLT OPTIONS
1 1/4" TRADE SIZE KNOCKOUTS
3.00
2.50
32.00
4.00
(2) 3.00 KNOCKOUTFOR RF CABLE ROUTING OPTION
1" TRADE SIZE KNOCKOUTS
02/15/17
A
B
C
D
A
B
C
D
4 3 2
4 3 2 1
These drawings and specifications are the proprietary property of CommScope Inc. and may be used only for the specific
purpose authorized in writing by CommScope Inc.
±2°±1/32
A.12.06.031
DO NOT SCALE THIS PRINT
TOLERANCES UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES U.O.S.
REMOVE BURRS AND BREAK EDGES .005
.XX = ±
.XXX= ±
.X = ± ANGLES FRACTIONS
--
REVISION:
CHECKED BY:
DATE:
FINISH:
WEIGHT
1:10MATERIAL:
SCALE:
ASSEMBLY DRAWINGDRAWING TYPE:
DESCRIPTION:
DRAWN BY:
1 of 1SHEET: PART NUMBER:
SSC-760236114JRC
METROCELL RADIO CONCEALMENT ENCLOSURE
P R O D U C T
S P e C i f i C a T i O n
Commscope’s Radio Shroud Enclosure is designed to house small cell radio and ancillary equipment .
It is an outdoor enclosure which hides high technology communication equipment.
It offers optimal protection against manipulation, vandalism and environmental influences.
This shroud is available in different colors which guarantees an harmonized implementation in the surroundings.
CommScope's MetroCell Stolutions provide all the building blocks to get your outdoor small cells deployed
Outdoor Enclosure for Small Cell Radio EquipmentRadio Shroud Enclosure
The Radio Shroud Enclosure is specially developed in cooperation with the New York Art Commission ensuring a inconspicuous integration into urban areas.
• Possibility of pre-mounting RF,mains, grounding, fiber opticcables, and filtering/diplexing.
• Easy installation and commissioning
• Protection against vandalism
• Inconspicuous design
MetroCell Solutions
S P E C I F I C A T I O N S
www.commscope.comVisit our Web site or contact your local Commscope representative for more information.
© 2017 Commscope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of Commscope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to Commscope products or services.
Radio Shroud Enclosure Assembly
Radio Enclosure Outline Drawing
Mechanical
Height, width, depth mm (in) . . . . . . . . . . . . 894 x 397 x 228 . . . . . . . . . . . . . . . . . . (35 .2 x 15 .6 x 9)
Weight without RUs, kg (Ib) . . . . . . . . . . . . . 6 (13 .2)
Material . . . . . . . . . . . . . Fiber Glass
Paint Code Options . . . . . . . . . . . . . Brown SW 10049 . . . . . . . . . . . . . Silver SW 26373 . . . . . . . . . . . . . Green SW 14062 . . . . . . . . . . . . . Green SW 14050 . . . . . . . . . . . . . Black SW 27038
Enclosure Ordering Information (Empty Shell - No Mount)
Brown SW 10049 Silver SW 26373 Green SW 14062
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . Green SW 14050 Black SW 27038
. . . . . . . . . . . . .
. . . . . . . . . . . . .
All figures are typical values unless otherwise stated.
CommScope reserves the right to change all hardware and software characteristics without notice.
MC-SP-RSE-17-001-000
ssc-7602350471-SB ssc-7602350471-SCssc-7602350471-SDssc-7602350471-SD2 ssc-7602350471-SE
Brown SW 10049 Silver SW 26373 Green SW 14062 Green SW 14050 Black SW 27038
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
Enclosure Ordering Information (Universal Inner Spine with Pole Brackets)
ssc-7602350471-MT-SB ssc-7602350471-MT-SC ssc-7602350471-MT-SDssc-7602350471-MT-SD2 ssc-7602350471-MT-SE
MetroCell Solutions
MC-SP-PTC-16-001-02
SSC‐760233122Pole Top Radio Concealment Antenna Mount Concealment Enclosure for up to four 5W Ericsson metro cell radios
Introduction
This document describes the CommScope pole top radio concealment antenna mount.
The solution is intended to house and conceal up to four 5W metro cell radios directly below a multiband canister antenna.
Application
This solution is specifically intended for use with 1-5 Watt metro cell radios.
As-built, accepts Ericsson mRRU12 and 2203 5Wmetro cell radios.
Orderable to mount multi-band and multi-portantennas from Commscope, Kathrein, andAmphenol
GR-487 thermally verified via convection cooling
Variable pole diameter mounting kits available tomount to existing structures.
Matching light pole or monopole options available
Multiple color options available.
Overall Dimensions and Weight
Height / Diameter / Weight (Without Antenna and Radios) 35 in. (890mm) / 18.0 in. (457mm) / 75lbs. (34kg)
Finish
Galvanized per ASTM A123/A123M finish for all steel components; Aluminum components are RoHS complaint chromate. Concealment covers are powder coated Light Grey - RAL 7035 per specification WL-2356. (Other colors available)
Antenna Compatibility (Orderable PN)
SSC-760233122-1 CommScope RVVPPS or VVPPS SSC-760233122-2 Kathrein 16in Base Dia Series SSC-760233122-3 Amphenol 14.5in Dia Series
Radio Compatibility (Ericsson) (4) model 2203, or (1) Ericsson mRRUS12 and (2) 2203, or (2) mRRUS12
• Pole Top radio concealment and canisterantenna mounting
• Supports up to four 5W metro cell radios
• Includes integrated grounding bar, polemounting and RRU mounting hardware.
Line Drawing – Component Specifications
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
MetroCell Solutions
MC-SP-PTC-16-002-00
SSC-760235601Pole Top Radio Concealment Antenna Mount Concealment Enclosure for up to four 5W Ericsson 2203 metro cell radios
Introduction
This document describes the CommScope pole top
radio concealment antenna mount.
The solution is intended to house and conceal up to
four 5W metro cell radios directly below a multiband
canister antenna.
Application
This solution is specifically intended for use with 1-5
Watt metro cell radios.
As-built, accepts Ericsson (4) 2203 5W metro cell
radios.
Orderable to mount multi-band and multi-port
antennas from Commscope, Kathrein, and
Amphenol
GR-487 thermally verified via convection cooling
Variable pole diameter mounting kits available to
mount to existing structures.
Matching light pole or monopole options available
Multiple color options available.
Overall Dimensions and Weight
Height / Diameter / Weight
(Without Antenna and Radios) 35 in. (890mm) / 15.0 in. (381mm) / 60lbs. (27kg)
Finish
Galvanized per ASTM A123/A123M finish for all steel components;
Aluminum components are RoHS complaint chromate. Concealment
covers are powder coated Light Grey - RAL 7035 per specification WL-
2356. (Other colors available)
Antenna Compatibility (Orderable PN)
SSC-760233122-1 CommScope RVVSSP or VVSSP
SSC-760233122-2 CommScope NH Seres (12in dia)
SSC-760233122-3 Kathrein 16in Base Dia Series, Amphenol 14.5in Dia
Radio Compatibility (Ericsson) (4) Ericsson model 2203
• Pole Top radio concealment and canisterantenna mounting
• Supports up to four 5W metro cell radios
• Includes integrated grounding bar, pole
mounting and RRU mounting hardware.
Line Drawing – Component Specifications
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information.
MetroCell Solutions
MC-SP-PTC-16-002-00
SSC‐760235604Pole Top Radio Concealment Antenna Mount Concealment Enclosure for up to three 5W Ericsson 2203 metro cell radios
Introduction
This document describes the CommScope pole top radio concealment antenna mount.
The solution is intended to house and conceal up to four 5W metro cell radios directly below a multiband canister antenna.
Application
This solution is specifically intended for use with 1-5 Watt metro cell radios.
As-built, accepts Ericsson (3) 2203 5W metro cellradios.
Orderable to mount multi-band and multi-portantennas from Commscope, Kathrein, andAmphenol
GR-487 thermally verified via convection cooling
Variable pole diameter mounting kits available tomount to existing structures.
Matching light pole or monopole options available
Multiple color options available.
Overall Dimensions and Weight
Height / Diameter / Weight (Without Antenna and Radios) 21 in. (533mm) / 15.0 in. (381mm) / 36lbs. (16kg)
Finish
Galvanized per ASTM A123/A123M finish for all steel components; Aluminum components are RoHS complaint chromate. Concealment covers are powder coated Light Grey - RAL 7035 per specification WL-2356. (Other colors available)
Antenna Compatibility (Orderable PN)
SSC-760235604-1 CommScope RVVSSP or VVSSP SSC-760235604-2 CommScope NH Series (12in dia) SSC-760235604-3 Kathrein 16in Base Dia Series, Amphenol 14.5in Dia
Radio Compatibility (Ericsson) (3) Ericsson model 2203
• Pole Top radio concealment and canisterantenna mounting
• Supports up to three 5W metro cell radios
• Includes integrated grounding bar, polemounting and RRU mounting hardware.
MC-SP-PTC-16-002-00
Line Drawing – Component Specifications
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
Product Specification
SSC-760230037 Soft-Shell ConcealmentTri-sector Dual-band Concealed antenna Solution
(698-896 MHz - 1695-2360 MHz)
Construction Materials
Radome: Concealment Fabric Precontraint
Radome: Support Plate Hot Dip Galvanized Steel
Radome: Rod, Nuts, Washers Hot Dip Galvanized Steel
Pole Steel Hot Dip Galvanized Steel
Antenna Bracket Hot Dip Galvanized Steel
Mechanical
Dimensions (hxd) mm 1895 x 584
Weight Kg 100
Azimuth Fixed
Survival wind speed Km/h
Wind Loading
Color
200
821 N @ 150Km/h / 185 lbf @ 150Km/h -
Electrical
Antenna type 3 x SBNHH-1D65A
Isolation (dB) 23
Return Loss (dB) 13
Passive Intermodulation (dBc) -143 (2x +43dBm in band carriers)
Environmental and Mechanical Tests
73BSAWI-2050: Environmental Test and Test Methods IEC 60068-2-64: Random Vibration
ETS-300 019-2-1: Environmental Test Storage IEC 60068-2-6: Sine Vibration
ETS-300 019-2-1: Environmental Test Transportation IEC 60068-2-5: Part 2- Simulated Solar Radiation
ASTM E8M: Tensile Test IEC 60068-2-31: Rough Handling Shocks (Drops)
MIL-STD 810G: Blowing Wind IEC 60068-2-11: Salt Fog
This page intentionally left blank.
MetroCell Solutions
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information.
MetroCell Complete Site Solutions Complete Site Solutions Utilizing CommScope’s MetroCell Concealment and RF Products
Introduction
This document describes CommScope MetroCell complete site solutions.
Utilizing state of the art CommScope concealment, steel, RF, fiber and antenna products, these solutions are delivered to a site with everything needed to get the MetroCell on-air!
Application
Standard configurations for repeatable,consistent build out of MetroCells.
Single part number ordering simplifies logistics.
Consistent designs increase speed to market andreduce the zoning approval cycle.
Faster installations mean more sites installed inless time and on air sooner. Reduced labor costs.
Factory testing and integration options available.
Mulitple color and height options
Engineered poles and foundation designs PEstamped for all 50 states.
Scalable for future upgrades
LED Luminaire and support arm options
0 0
16 393.7
54 1371.6
73 1841.5
120 3050.3
153 3886.2
296 7518.4300 7620
318 8071.4 RAD CENTER
330 8379.5
149 3771.9
BB
AA
SSC-760235352-25 METROCELL, CONCEALMENT MTG POLE, 6IN OD, 25FT
COMMSCOPEV360-QS-GC3-3XR (HIGH BAND QUASI)F4-HMHR-4M5-SGW-D (4) RF Jumpers - Antenna to Diplexer
SSC-760232884 METROCELL, W-A Enclosure SSC- 760235655KIT, METROCELL W-A DIPLEXER AWS-PCS WITH RRU RF JUMPERS
RF CABLE ROUTING PORT HOLE
AC DISTRIBUTION ACCESS PORT
AC METER ACCESS PORT
INPUT ACCESS PORT
AC DISTIBUTION PANELSQUARE-D Q02L40RBCP (2) POSITION - (4) DEVICE(OPTIONAL 6 POSITION CONFIG)
ANTENNA ACCESS PORT HOLE
11.00 279.4REF
11.00 279.4 REF
R2.00 50.8REF
1.25 31.75(4) HOLES ON
10.625" DIA BOLT CIRCLE
SECTION B-BSCALE 1 : 25
26 660.4REF
SECTION A-ASCALE 1 : 25
AC METERMOUTING(OPTIONAL)
REVISIONSREV. DESCRIPTION BY DATE00 PRELIMINARY RELEASE JRC 01/10/2017
12/21/16
A
B
C
D
A
B
C
D
4 3 2 1
4 3 2 1
These drawings and specifications are the proprietary property of CommScope Inc. and may be used only for the specific
purpose authorized in writing by CommScope Inc.
±2°±1/32
00.12.06.031
DO NOT SCALE THIS PRINT
TOLERANCES UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES U.O.S.
REMOVE BURRS AND BREAK EDGES .005
.XX = ±
.XXX= ±
.X = ± ANGLES FRACTIONS
--
REVISION:
CHECKED BY:
DATE:
FINISH:
WEIGHT
NTSMATERIAL:
SCALE:
ASSEMBLY DRAWINGDRAWING TYPE:
DESCRIPTION:
DRAWN BY:
1 of 1SHEET: PART NUMBER:
JRC
METROCELL, W-A POLE SOLN, AWS-PCS 28FTSSC-760235889-28
16 409
AA
SSC-760235352-25METROCELL, CONCEALMENT MTG POLE, 6IN OD, 25FT
COMMSCOPEV360-QS-GC3-3XR (HIGH BAND QUASI) SHOWN3X-V65S-C3-3XR (HIGH BAND TRI-SECTOR)RVVSS-360S-F (12 PORT MULTIBAND)OR EQUIVALENT 17IN DIA X 2FT TALL MAX CANNISTER ANTENNA
SSC-760236114METROCELL, CONCEALMENT ENCLOSURECBC-1923T-43-2X QUAD AWS-PCS DIPLXER(8) F1A-HMHM-1M-P-SGW RF JUMPERS(4) F1A-HMHM-4.5M-P-SGW RF JUMPERS
AC LOAD CENTER ACCESS PORT1-1/4" NPT OPPOSITE SIDE
AC METER ACCESS PORT3/4" NPT OPPOSITE SIDE
INPUT ACCESS PORT
ANTENNA ACCESS PORT HOLE
1.25 31.8(4) HOLES ON A
10.625" BOLT CIRCLE 11 279.4
11 279.4
SECTION A-ASCALE 1 : 25
12 303.1
0 0
54 1371.6
72.50 1841.5
120 3057.6125 3175
153 3886.2
160 4073.6
300 7620
318 8071.4
330 8379.5
15.50 393.7
295 7502.5
AC LOAD CENTERDISCONNECT
SQUARE-D Q02L40RBCP (2) POSITION - (4) DEVICE
AC METERMOUTING(OPTIONAL)
RF CABLE ROUTINGPORT HOLE
CABLE ENTRYPORT HOLE
REVISIONSREV. DESCRIPTION BY DATE00 PRELIMINARY DESIGN JRC 02/01/2016
12/21/16
A
B
C
D
A
B
C
D
4 3 2 1
4 3 2 1
These drawings and specifications are the proprietary property of CommScope Inc. and may be used only for the specific
purpose authorized in writing by CommScope Inc.
±2°±1/32
00.12.06.031
DO NOT SCALE THIS PRINT
TOLERANCES UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES U.O.S.
REMOVE BURRS AND BREAK EDGES .005
.XX = ±
.XXX= ±
.X = ± ANGLES FRACTIONS
--
REVISION:
CHECKED BY:
DATE:
FINISH:
WEIGHT
NTSMATERIAL:
SCALE:
ASSEMBLY DRAWINGDRAWING TYPE:
DESCRIPTION:
DRAWN BY:
1 of 1SHEET: PART NUMBER:
JRC
METROCELL, ENCLOSURE CONCEAL SOLNSSC-760236115-28
18 457.2
10.75 273.1
0 0
10 254
54 1371.6
72 1816.1
296 7518.4
347 8810.9RAD CENTER
360 9140.6
300 7620
335 8515.9 ANTENNA MOUNT
AA
SSC-760235355-25METROCELL, CONCEALMENT MTG POLE10 3/4" IN OD, 25FT TALL
ANTENNA (NOT INCLUDED)COMMSCOPE RVVSS-360S-F (12 PORT MULTIBAND)KATHREIN 6-PORT OMNI PN 80010784 (SHOWN)OR EQUIVALENT 17IN DIA X 2FT TALL MAX CANNISTER ANTENNA
SSC-760233122METROCELL, POLETOP RRU CONCEALMENTF1A-HMHM-1M-P-SGW (6) RRU TO ANTENNA RF JUMPERS
AC DISTRIBUTION ACCESS PORT
AC METER ACCESS PORT
INPUT ACCESS PORT
AC DISTIBUTION PANELSQUARE-D Q0816L100RBCP8 POSITION - 100AMP LOAD CENTER
ANTENNA ACCESS PORT HOLE
AC METERMOUTING(OPTIONAL)
TRANSITION SHROUD (OPTIONAL)
15.00 381REF
15.00 381 REF
1.12 28.5(4) HOLES ON
16.0" DIA BOLT CIRCLE
SECTION A-ASCALE 1 : 25
REVISIONSREV. DESCRIPTION BY DATE01 CHANGED HEIGHT TO 30FT JRC 01/27/2017
12/21/16
A
B
C
D
A
B
C
D
4 3 2 1
4 3 2 1
These drawings and specifications are the proprietary property of CommScope Inc. and may be used only for the specific
purpose authorized in writing by CommScope Inc.
±2°±1/32
01.12.06.031
DO NOT SCALE THIS PRINT
TOLERANCES UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES U.O.S.
REMOVE BURRS AND BREAK EDGES .005
.XX = ±
.XXX= ±
.X = ± ANGLES FRACTIONS
--
REVISION:
CHECKED BY:
DATE:
FINISH:
WEIGHT
NTSMATERIAL:
SCALE:
ASSEMBLY DRAWINGDRAWING TYPE:
DESCRIPTION:
DRAWN BY:
1 of 1SHEET: PART NUMBER:
JRC
METROCELL, SOLN - POLE TOP - 10IN X 30FTSSC-760236028-30
10.75 273.1
0 0
10 254
54 1371.6
72 1816.1
296 7518.4
347 8808.6RAD CENTER
360 9144
300 7615.2
335 8506.6 ANTENNA MOUNT
AA
SSC-760235355-25METROCELL, CONCEALMENT MTG POLE10 3/4" IN OD, 25FT TALL
ANTENNA COMMSCOPE RVVSSP-360S-F (12 PORT MULTIBAND) (SHOWN)OR EQUIVALENT 17IN DIA X 2FT TALL MAX CANNISTER ANTENNA
SSC-760235601METROCELL, POLETOP RRU CONCEALMENTF1A-HMHM-1M-P-SGW (6) RRU TO ANTENNA RF JUMPERS
AC DISTRIBUTION ACCESS PORT
AC METER ACCESS PORT
INPUT ACCESS PORT
AC DISTIBUTION PANELSQUARE-D Q0816L100RBCP8 POSITION - 100AMP LOAD CENTER
ANTENNA ACCESS PORT HOLE
AC METERMOUTING(OPTIONAL)
TRANSITION SHROUD (OPTIONAL)
15.00 381REF
15.00 381 REF
1.13 28.58(4) HOLES ON
16.0" DIA BOLT CIRCLE
SECTION A-ASCALE 1 : 25
REVISIONSREV. DESCRIPTION BY DATE00 INITIAL RELEASE JRC 01/27/2017
12/21/16
A
B
C
D
A
B
C
D
4 3 2 1
4 3 2 1
These drawings and specifications are the proprietary property of CommScope Inc. and may be used only for the specific
purpose authorized in writing by CommScope Inc.
±2°±1/32
00.12.06.031
DO NOT SCALE THIS PRINT
TOLERANCES UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES U.O.S.
REMOVE BURRS AND BREAK EDGES .005
.XX = ±
.XXX= ±
.X = ± ANGLES FRACTIONS
--
REVISION:
CHECKED BY:
DATE:
FINISH:
WEIGHT
NTSMATERIAL:
SCALE:
ASSEMBLY DRAWINGDRAWING TYPE:
DESCRIPTION:
DRAWN BY:
1 of 1SHEET: PART NUMBER:
JRC
METROCELL, SOLN - POLE TOP - 10IN X 30FTSSC-760236222-30
10.75 273.1
0 0
10 254
54 1371.6
72 1816.1
296 7518.4
333 8453.2RAD CENTER
345 8759.7
300 7615.2
321 8153.2 ANTENNA MOUNT
AA
SSC-760235355-25METROCELL, CONCEALMENT MTG POLE10 3/4" IN OD, 25FT TALL
ANTENNA COMMSCOPE RVVSSP-360S-F (12 PORT MULTIBAND) (SHOWN)OR EQUIVALENT 17IN DIA X 2FT TALL MAX CANNISTER ANTENNA
SSC-760235604METROCELL, POLETOP RRU CONCEALMENTF1A-HMHM-1M-P-SGW (6) RRU TO ANTENNA RF JUMPERS
AC DISTRIBUTION ACCESS PORT
AC METER ACCESS PORT
INPUT ACCESS PORT
AC DISTIBUTION PANELSQUARE-D Q0816L100RBCP8 POSITION - 100AMP LOAD CENTER
ANTENNA ACCESS PORT HOLE
AC METERMOUTING(OPTIONAL)
TRANSITION SHROUD (OPTIONAL)
15.00 381REF
15.00 381 REF
1.13 28.58(4) HOLES ON
16.0" DIA BOLT CIRCLE
SECTION A-ASCALE 1 : 25
REVISIONSREV. DESCRIPTION BY DATE00 INITIAL RELEASE JRC 01/27/2017
12/21/16
A
B
C
D
A
B
C
D
4 3 2 1
4 3 2 1
These drawings and specifications are the proprietary property of CommScope Inc. and may be used only for the specific
purpose authorized in writing by CommScope Inc.
±2°±1/32
00.12.06.031
DO NOT SCALE THIS PRINT
TOLERANCES UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES U.O.S.
REMOVE BURRS AND BREAK EDGES .005
.XX = ±
.XXX= ±
.X = ± ANGLES FRACTIONS
--
REVISION:
CHECKED BY:
DATE:
FINISH:
WEIGHT
NTSMATERIAL:
SCALE:
ASSEMBLY DRAWINGDRAWING TYPE:
DESCRIPTION:
DRAWN BY:
1 of 1SHEET: PART NUMBER:
JRC
METROCELL, SOLN - POLE TOP - 10IN X 29FTSSC-760236221-29
MetroCell Solutions
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
SSC-760236498 Modular Integrated Concealment Pole Concealed antennas and remote radio heads in a configurable slim-line package
Introduction
This document describes the CommScope modular concealment pole with integrated remote radio heads.
Measuring 24 inches in diameter, this solution is intended to conceal a series of remote radio heads, antennas and ancillary equipment in a customer configurable solution.
Application
Modular design allows for flexibility with a consistent appearance. Customer defines radio and antenna requirements and an orderable solution will be configured.
• High Power and Low Power remote radio headconcealment options.
• Antenna concealment solution utilizesCommScope’s soft-shell radome technology forimproved RF performance with improvedaccessibility and weight
• Configured solution can be factory pre-assembledand pre-integrated or shipped in module sectionsfor field assembly.
Specifications
Diameter/ Height 21 in. dia slim line pole configurable to a max AGL of 50ft
Antenna Concealment Soft-Shell radome module with spring tensioning system - 6ft Tall CommScope SBNHH-1D65A or NHH-1D65A antennas pre-integrated (Other antenna options available; limited to outside radome diameter)
Equipment Concealment High Power Radios: (2) in a 4ft tall concealment module Low Power Radios: Up to (6) in a 3ft tall concealment module RF Conditioning, Fiber/Power Distribution – 2ft tall concealment module
Finish Galvanized per ASTM A123/A123M finish for all steel equipment; Concealment radomes and panels are RAL7035 light grey per specification WL-2356 (other colors available)
MC-SP-IPS-17-001-00
2'-0
" 4
'-0"
3'-0
" 6
'-0"
2'-0
"
50'
-0" M
AX
AG
L
24"
SOFT-SHELL RADOMEANTENNA CONCEALMENT MODULE(1) OR (2) TRI-SECTOR MODULESSBNHH-1D65A OR NHH-1D65ACONCEALED ANTENNAS(6FT TALL MODULE)
RF CONDITIONING MODULEMOUNTING FOR DIPLEXERS AND/OR 3-WAY SPLITTERS(2FT TALL MODULE)
LOW POWER RADIOCONCEALMENT MODULEMOUNTING FOR UP TO (6) LOW POWER 5W RADIOS (3FT TALL MODULE)
HIGH POWER RADIOCONCEALMENT MODULEMOUNTING FOR (2) HP RADIOSAND AC/DC RECTIFIER MODULES(4FT TALL MODULE)
FIBER & POWER OVP/DEMARCCONCEALMENT MODULEAC AND FIBER DISTRIBUTION(2FT TALL MODULE)
BASE MOUNTING POLEMULITPLE LENGTH OPTIONS
00 PRELIMINARY RELEASE 03/09/17 JRCREV DESCRIPTION DATE APPROVED
REVISIONS
1 OF 1
JRC
READRVRW
03/09/2017
UNLE
SS O
THER
WIS
E SP
ECIF
IED
DIME
NSIO
NS A
RE IN
MILL
IMET
ERS
INTE
RPRE
T PE
R IS
O ST
ANDA
RDS
HAND
BOOK
,TEC
HNIC
AL D
RAW
INGS
,VO
LUME
S 1 &
2, T
HIRD
EDI
TION
(200
2)
CE
WORK AREAECN
DRAWING SHEETMODEL
SCALE
SIZE
A4 REVISIONSTATUSVERSION REVISIONSTATUSVERSION
DOCUMENT NO.
NTS
TITLENAME DATE
C 2016 CommScope, Inc. Confidential
2601 Telecom PkwyRichardson, TX 75082PH: 972-207-4984
SSC-760236498
MODULAR INTEGRATED CONCEALMENT POLE
CUSTOMER DEFINED REQUIREMENTS CONFIGURED THRU
THE MODULE SIZES AS SHOWN
MetroCell Solutions
MC-SP-WPB-17-001-01
SSC‐760189456 Wood Pole‐Bracket with Shroud Bracket with shroud for up to three cMRO 5W metro cell radios
Introduction
This document describes the CommScope wood pole bracket with shroud.
Measuring 21 inches (533mm) high, this solution is intended to house up to three ALU/Nokia radios within the tight confines of the communications space typically residing on joint use wooden utility poles.
Application
This solution is specifically intended for use with three 5 Watt metro cell radios connected via common public radio interface (CPRI) either directly to dark fiber or via coarse wave division multiplexing (CWDM).
As-built, accepts three ALU/Nokia cMRO radios.
Enables attractive concealment and securing ofsite equipment on common utility poles
Anti-gouge mounting bracket distributes loadevenly to mitigate bracket from loosening overtime
GR-487 thermally verified via convection cooling
Overall Dimensions and Weight
Height / Width / Depth to face of pole 21 in. (533mm) / 18.5 in. (470mm) / 22.4 in. (569mm)
Weight (without equipment) 45 lbs. (20kg)
Finish Galvanized per ASTM A123/A123M finish for all mounting hardware;shroud is powder coated Sepia Brown - RAL 8014 per specification WL-2356 (other colors available)
Allocated climb space 5 in. (127mm)
Securing method to pole Thru-bolted to pole, using included 5/8” threaded rod hardware kit.
Optional banding/hose clamp mounting provisions included in bracket
• Zero ground footprint meets the needs ofsmaller parkways and easements
• Designed to fit within the space typicallyallocated beneath the electrical supplyand communications lines
• Supports up to three 5W metro cell radios
• Includes integrated grounding bar and allpole mounting and RRU mountinghardware.
Typical Line Drawing with (3) Nokia/ALU cMRO 5W Radios
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
MetroCell Solutions
MC-SP-WPB-17-004-01
SSC‐760233189 Wood Pole‐Bracket with Shroud Bracket with shroud for up to five Ericsson 2203 5W metro cell radios
Introduction
This document describes the CommScope wood pole bracket with shroud.
Measuring 21 inches (533mm) high, this solution is intended to house up to five Ericsson 2203 radios within the tight confines of the communications space typically residing on joint use wooden utility poles.
Application
This solution is specifically intended for use with five 5 Watt metro cell radios connected via common public radio interface (CPRI) either directly to dark fiber or via coarse wave division multiplexing (CWDM).
As-built, accepts four 2203 radios with spaceavailable for an additional equipment such as anadditional 2205 radio, diplexer or fiber demarc.
Enables attractive concealment and securing ofsite equipment on common utility poles
Anti-gouge mounting bracket distributes loadevenly to mitigate bracket from loosening overtime
GR-487 thermally verified via convection cooling
Overall Dimensions and Weight
Height / Width / Depth to face of pole 21 in. (533mm) / 18.5 in. (470mm) / 22.4 in. (569mm)
Weight (without equipment) 50 lbs. (22.6kg)
Finish Galvanized per ASTM A123/A123M finish for all mounting hardware;shroud is powder coated Sepia Brown - RAL 8014 per specification WL-2356 (other colors available)
Allocated climb space 5 in. (127mm) separate
Securing method to pole Thru-bolted to pole, using included 5/8” threaded rod hardware kit.
Optional banding/hose clamp mounting provisions included in bracket
• Zero ground footprint meets the needs ofsmaller parkways and easements
• Designed to fit within the space typicallyallocated beneath the electrical supplyand communications lines
• Supports up to five 5W metro cell radios
• Includes integrated grounding bar and allpole mounting and RRU mountinghardware.
Typical Line Drawing with (4) Ericsson 2203 5W Radios and (1) 2205 LAA Radio
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
MetroCell Solutions
MC-SP-WPB-17-005-01
SSC‐760233189NSCompact RRU Wood Pole‐Bracket Bracket for up to five Ericsson 2203 Radios
Introduction
This document describes the CommScope wood pole bracket.
Measuring 20.6 inches (524mm) tall, this solution is intended to house up to five Ericsson 2203 radios within the tight confines of the communications space typically residing on joint use wooden utility poles.
Application
This solution is specifically intended for use with 5w RRUs connected via common public radio interface (CPRI)
As-built, accepts four 2203 RRUs with additionalmounting space on the front to mount a fifth 2203or 2205 radio and/or diplexer.
Enables attractive concealment and securing ofsite equipment on common utility poles
Anti-gouge mounting bracket distributes loadevenly to mitigate bracket from loosening overtime
Optional concealment shroud available
Overall Dimensions and Weight
Height / Width / Depth to face of pole 20.6 in. (524mm) / 12.7 (322mm) / 16.0 in. (406mm)
Weight (without equipment) 31.5 lbs. (14kg)
Finish Galvanized per ASTM A123/A123M finish for all mounting hardware
Allocated climb space 7 in. (152 mm)
Securing method to pole Thru-bolted to pole, using included threaded rod hardware kit.
Optional banding/hose clamp mounting provisions included in bracket
• Zero ground footprint meets the needs ofsmaller parkways and easements
• Designed to fit within the space typicallyallocated beneath the electrical supplyand communications lines
• Supports up to five 5W remote RRHs
• Includes grounding bar and all polemounting and RRU mounting hardware.
Typical Line Drawing with (4) Ericsson 2203 5W RRUs and (1) 2205 LAA Radio
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
MetroCell Solutions
MC-SP-WPB-17-002-02
SSC-760235419RRH Wood Pole-Bracket with Shroud Bracket with shroud for up to two Ericsson 40/60W RRU11 or RRU12 Radios with PSU
Introduction
This document describes the CommScope wood pole
bracket with shroud.
Measuring 28 inches (711mm) tall, this solution is
intended to house up to two high power Ericsson radios
within the tight confines of the communications space
typically residing on joint use wooden utility poles.
Application
This solution is specifically intended for use with 40-
60W remote radios heads connected via common
public radio interface (CPRI)
As-built, accepts the Ericsson 40W and 60W
remote radio heads (RRU11 and RRU12) and
Ericsson PSU modules
Enables attractive concealment and securing of
site equipment on common utility poles
Anti-gouge mounting bracket distributes load
evenly to mitigate bracket from loosening over
time
GR-487 thermally verified via convection cooling
Overall Dimensions and Weight
Height / Width / Depth to face of pole 28 in. (711mm) / 27.5in. (699mm) / 26 in. (660mm)
Weight (without equipment) 87 lbs. (39.5kg)
Finish Galvanized per ASTM A123/A123M finish for all mounting hardware;
shroud is powder coated Sepia Brown - RAL 8014 per specification WL-
2356 (other colors available)
Allocated climb space 4 in. (102mm)
Securing method to pole Thru-bolted to pole, using included 5/8” threaded rod hardware kit.
Optional banding/hose clamp mounting provisions included in bracket
• Zero ground footprint meets the needs ofsmaller parkways and easements
• Designed to fit within the space typicallyallocated beneath the electrical supplyand communications lines
• Supports up to two 60W remote RRHs
• Includes grounding bar and all polemounting and RRU mounting hardware.
Typical Line Drawing with (2) Ericsson RRHs and Ericsson PSU
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information.
MetroCell Solutions
MC-SP-WPB-17-003-01
SSC‐760235419NSDual RRH Wood Pole‐Bracket Bracket for up to two Ericsson 40/60W RRU11/RRU12/RRU32 Radios with PSU
Introduction
This document describes the CommScope wood pole bracket.
Measuring 20.6 inches (524mm) tall, this solution is intended to house up to two high power Ericsson radios within the tight confines of the communications space typically residing on joint use wooden utility poles.
Application
This solution is specifically intended for use with 40-60W remote radios heads connected via common public radio interface (CPRI)
As-built, accepts the Ericsson 40W and 60Wremote radio heads (RRU11/RRU12/RRU32)and Ericsson PSU modules
Enables attractive concealment and securing ofsite equipment on common utility poles
Anti-gouge mounting bracket distributes loadevenly to mitigate bracket from loosening overtime
Optional concealment shroud available
Overall Dimensions and Weight
Height / Width / Depth to face of pole 20.6 in. (524mm) / 23.75in. (603mm) / 23.2 in. (591mm)
Weight (without equipment) 57 lbs. (26kg)
Finish Galvanized per ASTM A123/A123M finish for all mounting hardware
Allocated climb space 6 in. (152 mm)
Securing method to pole Thru-bolted to pole, using included 5/8” threaded rod hardware kit.
Optional banding/hose clamp mounting provisions included in bracket
• Zero ground footprint meets the needs ofsmaller parkways and easements
• Designed to fit within the space typicallyallocated beneath the electrical supplyand communications lines
• Supports up to two 60W remote RRHs
• Includes grounding bar and all polemounting and RRU mounting hardware.
Typical Line Drawing with (2) Ericsson RRUs and Ericsson PSU
© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.
www.commscope.comVisit our website or contact your local CommScope representative for more information.
© 2017 CommScope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services.