Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
2015 Product Overview
www.csunitec.com
MetalworkingSurface PreparationSurface Finishing
Concrete and MasonryDust Collection Systems
Hot Work Zone Tools
ElectricPneumaticHydraulic
Magnetic Drills, Cutters & Reamers Electric • Air • Hydraulic
• Manual or automatic feed
• Lightweight – from 24 lbs.
• Drill holes up to 5-1/8" dia.
• Electric, air and hydraulic
• Models available with swivel baseand adjustable x/y positioning
• Variety of annular cutters and accessories
• Fast, portable, burr-free cutting of metalplates, pipes, profiles and more… withoutcoolant or deburring
• Dust collection ports
• Electric and pneumatic
• Cut up to 5-1/8" dia.• Twist Drill up to 1-3/4" dia.
• Tap up to 1-5/8" dia.
Highest Power-to-Weight Ratios • Superior Magnetic Strength
Dry Cutting Metal SawsDry cut metaland plasticswithoutcoolant ordeburring
Metalworking
Electric, Air &
HydraulicModels
Drill holesup to
5-1/8" dia.
Super Hand-Held DryCut Saw• 12-5/8" diameter, cut up
to 3/8" thick steel plate and 4-3/4" depth in othermaterials
• Largest portable dry metalcutting saw on the market
Dry Cut Miter Saw• Portable 10" saw for
precise 45˚ cuts leftand right
Premium SuperDry Cutter• 14" dia. with 6"
depth of cut at 90˚
2 1-800-700-5919 • 203-853-9522 • www.csunitec.com
Steel, Stainless Steel, Aluminum and Carbon Fiber
LargestHand-heldDry-cutting
Saw
• Shadow-free, uniform finishes
• Ideal for finishing stainless steel, steel,nonferrous metals and plastics
• Hollow-core abrasives save time and money
• Electric or air
• Manual and automatic bevelingand deburring machines
• Ideal for deburring, chamferingand straightening edges onplates and pipe
Shadow-free,uniform brush,matte andmirror finishes
Kits and awide rangeof abrasivesare available
Surface Finishing
1-800-700-5919 • 203-853-9522 • www.csunitec.com 3
Metal – Steel, Stainless, Aluminum and more
• 7" rotary sander for coated/sealed/filled woodfloors, doors, window casings, stairs and more
• Large sanding disc, powerful motor and highspeeds improve operator productivity
• 9" rotary sander with variable speedfor smoothing drywall seams quicklyand cleanly before painting,plastering or decorating
• Lightweight unit and special handledesign enable operator to work forlong periods of time – evenoverhead
Wood and Drywall
Dust-free workingwhen connected to an industrial vacuum
Diamond Core Drills and SawsWet and Dry • Electric, Hydraulic and Air
• Drill holes up to 18" dia. in floors, walls and ceilings
• Fast drilling of reinforced concrete, concrete, brick, block and stone
• 5/8" and 1-1/4" standard thread connections
• Drills are equipped witha "slip clutch"
Portable WaterPump System• Water recycling
and slurrycontainmentvacuum
Hydraulic and Air Core Drills
• Hydraulic and air core drills
• Hand-held and rig-mounted
• Holes up to 12"with stand
• High-speed diamond core drillfor holes up to 2-5/8"
• Ideal for stone, tile, ceramic,porcelain, stoneware, glass,reinforced concrete and more
2-speed wet/dry
diamond core drill
Concrete and Masonry
Wet
4 1-800-700-5919 • 203-853-9522 • www.csunitec.com
Drill dowel,anchor and thruholes in tile,
natural stone andconcrete – quickly
and cleanly
• Diamond circular saws and multi-use saws forwet/dry cutting of granite, tile, concrete and more
• Wall slotters and wall chasers for channels
Tile Saw
WallChasers
Chain Saws and Cut-Off Saws• Hand-held and walk-behind air concrete saws
• Cut concrete, wet or dry
• Ideal for floor sawing, trenching, road repairand more
• 14" to 20" blade capacity
• Powerful vacuums forconcrete dust
• Self-cleaning filter system
• With or without HEPA filtration
• Wet or Dry
• Heavy-duty hand-held andwalk-behind concrete grinders
• 5", 7" and 9" models
• Remove paint, epoxy, glue andother hard coatings
• Dust extraction ports
• Air and hydraulic concrete chain sawsfor reinforced concrete
• Air chain saw for ductile iron
• Straight cuts throughconcrete up to 15" deep
AIRPower
F4 Diamond ChainsAIR Power
Diamond Grinders, Vacuums & Mixers
Concrete and Masonry
1-800-700-5919 • 203-853-9522 • www.csunitec.com 5
• Heavy-duty mixing drills
• Mix heavy materials such as epoxy, mortarsand cement, as well as paint and more
• Portable mixing stations
Steel & Concrete Surface PreparationCS Unitec's surface preparation tools feature models with vibration reduction technology.Vibration damping components offset the hammer vibration when the tool impacts theworkpiece, reducing the risk of vibration-related injury.
Vibro-Lo™Vibration Reduction
Technology
Hand-Held Construction Scabblers (Pneumatic)• Low-Vibration Single- and Triple-Head • Roughen, reduce and level concrete• Prepare surfaces for coatings and finishes
Heavy-Duty Hand-Held Scabblers• Low-Vibration Single- and Triple-Head Scabbling Hammers• Optional vacuum shroud for dust extraction
6 1-800-700-5919 • 203-853-9522 • www.csunitec.com
Dust Collection Vacuums(Pneumatic • Electric)• Wet/Dry air-powered models
collect dry dust/debris and liquids
• Electric-powered wet/drymodels with HEPA filtration
Low-Vibration Steel Deck Hammer (Pneumatic)• Fracture and reduce scale, corrosion and thick coatings
in minutes, reducing blast media costs• Ideal for ship decks, tank bottoms, bridge decks, floating
platforms and more
Hand-Held Scaling Hammers (Pneumatic)• Low-Vibration Single- and Triple-Head Scaling Hammers• Remove thick scale, heavy corrosion, hard coatings, etc.
Hand-Held Scarifiers – Rotopeen™(Pneumatic • Electric)• Ideal alternative to small-area shot
blasting – clean/prepare steel andconcrete surfaces
Low-Vibration Needle/ChiselScalers (Pneumatic)• Vibro-Lo™ Needle/Chisel Scalers
remove coatings, corrosion andother accumulated materials
• Clean and stress-relieve weldseams and joints
Multi-Headed Floor Scabblers (Pneumatic)• Vibro-Lo™ 11-head model for concrete keying and laitance
removal; less-aggressive to protect substrate below• 5-head model for fast concrete removal and demolition
when leveling high spots, texturing and roughening andbreaking down hard coatings prior to blast cleaning
Floor Scarifiers / Planers (Electric • Pneumatic • Gas)• Ideal for the most demanding surface preparation and
material removal applications• Remove rust, scale and adhesives from steel and concrete
Long-Reach Chisels / Scrapers /Scalers (Pneumatic)• Lengths from 2' to 6'; chip,
scrape and descale with one tool
Air and Hydraulic Tools for Oil, Gas and Energy Industries
Safety Tools
For use in Ex and Hot Work ZonesFor use in Ex and Hot Work Zones
ATEX ClassifiedAir and Hydraulic Tools
ATEX ClassifiedAir and Hydraulic Tools
• Portable pneumatichacksaws for on-sitecutting of pipe up to 24"OD and structural steel
• Electric and hydraulicmodels also available
AirOperated
9"Cutting Capacity
4-3/4"
Cutting
Capacity
Call for ATEX details
• Pneumatic SDS Plus andSDS Max rotary hammer drills
• Hydraulic models available
Ex and Hot Work Zones
1-800-700-5919 • 203-853-9522 • www.csunitec.com
Non-sparking, Non-Magnetic
• High-quality non-sparking and non-magnetic safety tools
• Aluminum Bronze (AlBr) or Copper Beryllium (CuBe) alloy
• Hammers, wrenches, sockets, wedges, chisels and more
• For Ex and hot work zoneswhere hazardous, flammable or combustible materials are present
Electric, Air& HydraulicModels
• Pneumatic reciprocating saws for cuttingsteel and pipe up to 6" dia.
• Electric and hydraulic models available
• Pneumatic drilland air operatedmagnet
• Up to 2-1/16"dia. holes
• Electric andhydraulic modelsalso available
• Portable air band saws cutup to 8-1/2" round or 9" x 8"
• Electric and hydraulicmodels also available
• Explosion-proofaxial fans 12" to24" diameter
• Pneumatic andhydraulic impact
wrenches
• Air circular saws, 7-1/2" and9" dia., cut 90˚ and 45˚anglesup to 3-1/4" deep
7
CS Unitec, Inc. specializes in industrial power tools and safety tools for construction and industry.Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented the first pneumatic portableband saw. CS Unitec has added to its list of industry firsts with the widest range of portable magnetic drills and hand-held concrete coredrills. The line also includes surface preparation tools for metal, concrete and masonry, air, electric and hydraulic portable band saws,reciprocating saws, hack saws, nut runners, rotary hammer drills, rolling motors, non-sparking safety tools, portable mixers and dustextraction vacuum systems.
CS UNITEC, Inc. 22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email [email protected] • www.csunitec.com
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2014, CS Unitec, Inc., 10-14-5M
View product demonstrationsat www.csunitec.com.
… the power of innovation!®
For tool specifications and ATEX and Ex Zone information, visit www.csunitec.com.
Call 1-800-700-5919 or 203-853-9522 to request any of the catalogs shown.
View demo videos atwww.csunitec.com
Portable Magnetic Drills:Magnetic Drills & Accessories
Hand-held Drills and Drive UnitsNut Runners
Hammer Drills and more
Surface Finishing Tools:High-performance tools and
accessories for grinding, sanding,polishing, deburring and bevelingstainless steel, steel, nonferrous
metals, wood and more
Non-Sparking Hand Tools:Non-sparking Hand Tools
Power Tools for use in Ex Zones,ATEX Zones and Hazardous
Environments
Portable Saws:Hacksaws, Reciprocating Saws,Band Saws, Chain Saws, Cut-off
Saws and more
Concrete Tools:Surface Preparation Tools,Concrete Grinders, Dust
Collection Systems, DiamondCore Drills, Air Concrete Saws
and more
Metalworking Tools:Surface Preparation Tools, DustCollection Systems, Dry Cutting
Portable Saws, Portable MagneticDrills, Bridge Reamers and more
Portable Mixers:Portable Mixing Machines for
Mortar, Concrete, Plaster,Flooring Adhesives, Grout,
Coatings, Paint, Self-LevelingCompounds and more
Concrete & Masonry Tools:Power tools for the professionalcontractor to drill, cut, grind andsmooth concrete, masonry, wood,drywall and more – includes dust
collection tool systems
EIBENSTOCK’S EXCLUSIVE AGENT FOR NORTH AMERICA
ALL PRODUCTS ARE AVAILABLE THROUGH