for an on-site demonstration contact Sutton Tools on 1800 335 350

100% Australian Owned www.sutton.com.au

Masonry prograM

Totally New Technology

MasonryTrade tough quality, 2 cutting edges, carbide percussion tip with semi positive profile for aggressive drilling in hard material. Double Rolled flute provides greater dust extraction extending drill life.

PenetratorTungsten carbide tipped. Diamond ground percussion tip. Hexagonal shank for positive non slip drive.

Multi-PurposeGround carbide tip for rotary action only. The L-profile flute design efficiently extracts concrete, metal and wood particles. Ideal for drilling in multi laminated construction, such as through a steel bracket into masonry.

The flute (spiral) with a long pitch (lead) permits a quick removal of the aggregates (dust) the new finishing (treatment) “sandblasted” strengthens the body of the drill in the surface while guaranteeing good flexibility. Ideal for soft and medium hard materials and for wet concrete. The shank is suitable for all SDS plus hammer drilling machines.

Twister SDS Plus combines hi-tech with speed and efficiency. Concentrated on two specific points the Twister Plus technical improvements are innovative in the way the bit is cut. Special outlet throats accelerate the removal of drill waste. Drill bit head is honed for greater accuracy and an optimised percussion effect resulting in this drill being 30% quicker than comparable products. Self centring carbide tip and a unique flute design for fast swarf evacuation. Twister SDS Plus masonry drills are the fastest penetrating masonry drill on the market – guaranteed.

Booster SDS - Plus Masonry Drill features a self centering, solid carbide insert with 3 cutting edges unique flute design. Above and beyond the normal standards and quite simply unique, the Booster-plus is the all concrete solution for professionals equipped with SDS plus drilling machines. Its sturdiness gives it a life expectancy which is clearly better than that of traditional drills. The Booster Plus quality is far ahead of the standards making it an essential tool. Combining powerful impact force with incursion and efficiency on concrete and reinforced concrete provides five (5) times greater productivity.

With all the physical characteristics of the Booster Plus tip and with an SDS Max Shank, the Diager B3 Max drills are an SDS masonry revolution with quality exceeding the standard, the B3 Max is an essential tool capable of withstanding powerful impact, reinforced steel and mesh in concrete.

The Ultimax with 6 cutting edges has been designed for two main reasons: 1. Technically, to improve penetration speed, by using 6 points of

contacts which results in ideal centring and regularity of effort. Its tighter spiral increases rigidity.

2. Practically, vibration during drilling is greatly reduced.

With Drill Robustness, Precision, Long Life and Speed the Ultimax was developed for drilling through reinforced concrete. Studies on material resistance and tests under extreme conditions have culminated in solutions to all mechanical constraints.More Material Resists FlexFlex exerted in the lower section of a drill bit is the most likely destructive factor. The progressive core of the spiral adds material and increases the rigidity in this area which is subject to extreme pressure.Anti-blocking System6 asymmetric cutting edges reduce the risk of blockage when in use on a particularly hard aggregate, or on reinforced bar (rebar). The progressive core and roundness of the flute allow optimal removal of dust and negates any risk of blocking due to dust accumulation.Heat TreatmentThe hardness of the concrete combined with the power of the drill unite to create compression. The heat treatment of the body allows the energy of the drill to be concentrated on the tungsten carbide tip without absorbing shock waves.

Glass & TileGlass & Tile drill bits have a precision diamond ground carbide tip for exact pilot drilling with a high-temperature brazed carbide tip, cylindrical shank and a galvanised surface. The drill bit is suitable for drilling in tiles, porcelain and glass, however is not suitable for toughened glass. The drill bit should be used at slow speed on rotary only setting on the drill

Diamond CoreDiamond core bits have diamond encrusting to cut through materials including porcelain, sandstone, terracotta, ceramics and glass.

BlueCERAM

Blue Ceram’s secret lies in its revolutionary design and diamond segment technology, which enables the bit to be dressed. The core extraction chamber of Blue Ceram allows for waste evacuation.The Blue Ceram diamond-segment tip out performs standard tile drill bits giving you fast, accurate holes in dense, hard surfaces such as monocottura and glazed tiles, marble, china, sandstone, terracotta and ceramics.

Chisel tools with SDS Plus & SDS Max shanks for hammer action machines are made from treated high-tensile steel, suitable for tough demolition work. Styles available include Pointed, Flat, Angled, Toothed, Brick chasing and Concrete chasing suited to concrete brick and stone demolition.

www.sutton.com.au

Contents

Sutton Masonry 3

Sutton Penetrator 5

Sutton Multi-Purpose 7

Sutton Runner + 9

Diager Twister Plus & Multi-Fit 11

Diager Booster Plus 13

Diager B3Max 15

Diager Ultimax 17

Sutton Glass & Tile 19

P&N Diamond Core Bit 21

Sutton Blue Ceram 23

Diager Core Bits 25

Diager Chisels 27

Shanks 28

Performance Summary 29

www.sutton.com.au1

Maso

nry

Bit

Tungsten carbide tipped for drilling bricks tiles concreteN

ew

& Im

pro

ved D

esig

n/

/

ForBlueplug

8.0mm

x 120

Hamm

er

New

&ImImI

pm

pm

rororve

dD

esig

n

0x 120

TCT

PlainShank

www.sutton.com.au2

Brick

Granite

Stone

Concrete

pErForManCE

shank

double f uted spiral

Parallel shank.

Rolled double flute provides greater dust extraction

extending drill life.

Carbide percussion tip with semi positive profile for aggressive drilling in

hard materials.

2 cutting edges

3 1/8 Yellow • 60 2207054 5/32 75 2207125 3/16 White • 85 220729

150 2208355.5 7/32 Red • 95 220736

150 2208426 - 100 220743

150 2208596.5 1/4 Green • 100 220750

150 220866400 003740

7 9/32 100 220767150 220873

8 5/16 Blue • 120 220774150 220880400 005539

9 11/32 120 22078110 3/8 Orange • 120 220798

150 220897400 003177

11 Grey • 150 10 22090312 120 10 220811

150 10 22091013 1/2 120 10 220828

150 10 220927400 10 003948

14 9/16 150 10 22093416 5/8 Black • 150 12.7 220941

400 12.7 00471620 3/4 160 12.7 221337

400 12.7 00828822 7/8 160 12.7 221344

400 12.7 01082325 1 160 12.7 221351

400 12.7 009179

SetsSMD-2 (SF): 4.0, 5.0, 5.5, 6.5, 8.0, 10.0mm 6 080055SMD-3* (SF): 5.5x95, 6.5x100, 8.0x120 3 401010

Merchandiser**SMRY-8610 each5 each

2 each

(SF): 5.5, 6.5mm(SB): 5.5, 6.5, 10.0mm(SF): 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 10.0mm(SB): 5.0, 6.0, 7.0, 8.0, 11.0, 12.0, 13.0, 16.0mm

86 009636

Product Group A0604 A0604 A0604

Surface Finish Sandblasted Sandblasted Sandblasted

Material TCT TCT TCT

Application Standard Fixing Single Brick Double Brick

Packaging Single Pack Single Pack Single Pack

Order Quantity 1 1 1Diameter Plug Colour OA Length Shank Item # Price Item # Price Item # Pricemm inch

(SF) - Standard Fixing (SB) - Single Brick (DB) - Double Brick *Not available once current stock is depleted **Please contact your Sutton Tools representative when ordering merchandisers

SMRY-86

SMD-2

Masonry Set3 Piece

Hamm

er Action

New

& Im

pro

ved D

esig

n

redplug

5.5 6.5 8.0x95mm x100mm x120mm

greenplug

blueplug

Tungsten carbide tipped for drilling bricks tiles concrete/

/Ham

mer Action

New

& Im

pro

& Im

pro

& Im

ved

ved

v D

esig

ned D

esig

ned

redplug

greenplug

blueplug

Tungsten carbide tipped for drilling brickstiles

concrete/

ungsten carbide tipped for drilling bricks/ungsten carbide tipped for drilling bricksungsten carbide tipped for drilling bricks/ungsten carbide tipped for drilling bricks/ungsten carbide tipped for drilling bricks

/tiles/tiles/

SMD-3

www.sutton.com.au3

Prices exclude GST

Masonry Drill Bits Tungsten Carbide TippedTradesman quality for rotary and percussion drilling. Product packaging is colour code marked to indicate the correct plug size. Ideal for use in natural and artificial stone, masonry brickwork and concrete.Tungsten carbide tipped for increased life. Suitable for all impact drills or rotary hammer drills fitted with a chuck.Note: When using the rotary hammer, ensure you set the tool to impact mode.

M a s o n r y D r i l l s

Maso

nry

Bit

Tungsten carbide tipped for drilling bricks concrete, stoneDesigned for trade use

//

Penetrator/Hamm

er Action

For Blue plug

8.0mm

x 150

Maso

nry

Bit

Designed for trade use

Penetrator/Hamm

er Acti

Blue plug

0mm

50

HexShank

TCT

www.sutton.com.au4

Hexagonal shank for positive non slip drive.

Ground flute with special shape to increase dust

evacuation.

Tungsten Carbide Tipped. Diamond ground percussion tip.

hex shank

spiral f ute

2 cutting edges

Brick

Granite

Stone

Concrete

pErForManCE

5.0 White • 150 92 4.1 169545

5.5 Red • 150 92 4.3 169552

6.0 150 92 4.8 169569

6.5 Green • 150 92 4.7 169576

8.0 Blue • 150 92 6.7 169583

10.0 Orange • 150 92 8.1 169590

12.0 Grey • 150 92 8.9 169606

13.0 150 91 10.0 169613

14.0 150 91 10.9 169620

16.0 Black • 150 79 11.0 169637

20.0 160 89 11.0 169651

Merchandiser Pieces

PMD-241 each2 each3 each

13.0, 14.0, 16.0, 20.05.05.5, 6.0, 6.5, 8, 10, 12

24 176970

Product Group A0608

Surface Finish Bright

Material TCT

Application Single Brick

Packaging Single Pack

Order Quantity 1

Diameter Plug Colour OA Length Flute Length Hex Across Flat Item # Price

PMD-24

www.sutton.com.au5

Prices exclude GST

Penetrator Masonry Percussion Hammer Drill BitsProfessional quality for tougher masonry applications. Suitable for rotary and percussion this range of drills have hexagonal shanks and provide a more positive drive. Packaging is colour coded to indicate the correct plug size.This range is tungsten carbide tipped with a hex shank for maximum grip and power transfer.

P e n e t r a t o r M a s o n r y D r i l l s

New

& Im

pro

ved D

esig

n

ForBlueplug

8.0mm

x 120

Tungsten carbide tipped for drilling wood steel m

asonry/

/

Drill B

itM

ulti-Purpose

New

&ImImI

pm

pm

rororve

dD

esig

n

20 Drill B

itM

ulti-Purpose

PlainShank

TCT

www.sutton.com.au6

Parallel shank.

The L-profile flute design efficiently extracts concrete, metal and wood particles.

Ground carbide tip for non-hammer

action only.* For drilling wood, metal & masonry.

* Hammer & percussion action will damage the ground tip profile resulting in poor drilling performance. Drilling masonry materials prior to wood or steel will dull tip reducing the cutting performance.

shank

spiral f ute

2 cutting edges

Concrete

Brick

Metal

Wood

pErForManCE

Stone

Glass

3 1/8 Yellow • x 60 370256006

4 5/32 x 75 370256008

5 3/16 White • x 85 370256010

5.5 7/32 Red • x 85 370256011

6 - x 100 370256012

6.5 1/4 Green • x 100 370256013

x 300 370258013

7 9/32 x 100 370256014

x 300 370258014

8 5/16 Blue • x 120 370256016

x 300 370258016

9 11/32 x 120 370256018

10 3/8 Orange • x 120 370256020

x 300 370258020

12 - x 150 370257024

x 300 370258024

13 1/2 x 150 370257026

x 300 370258026

14 9/16 x 150 370257028

15 - x 150 370257030

16 5/8 Black • x 150 370257032

Merchandiser Pieces

Single Tier5 each

(SF) 3, 4, 5, 5.5, 6, 6.5, 7, 8, 10mm (SB) 12, 13

55 3707690340

Double Tier5 each

(SF) 3, 4, 5, 5.5, 6, 6.5, 7, 8, 9, 10mm (SB) 12, 13, 14, 15, 16mm (DB) 6.5, 7, 8, 10, 12, 13mm

105 3707690342

Product Group A0604 A0604 A0604

Surface Finish Bright Bright Bright

Material TCT TCT TCT

Application Standard Fixing Single Brick Double Brick

Packaging Single Pack Single Pack Single Pack

Order Quantity 1 1 1Diameter Plug Colour OA Length Shank Item # Price Item # Price Item # Pricemm inch

(SF) - Standard Fixing (SB) - Single Brick (DB) - Double Brick

www.sutton.com.au7

Prices exclude GST

M u l t i P u r p o s e D r i l l s

Drill Bits Multi-PurposeThe Heat treated body high grade carbide tip and high melt braze 1100ºC give this drill the ability to drill very hard materials. These multi-purpose bits can be used in concrete, bricks, stone, CSRTM Hebel®, Stainless Steel, Cast Iron, Steel & Glass.Features:• Ground carbide tip for rotary use only. Hammer and percussion action will damage the ground

tip profile resulting in poor drilling performance. Drilling masonry materials prior to wood or steel will dull tip reducing the cutting performance.

• The L-profile flute design efficiently extracts concrete, metal and wood particles.• Ideal for drilling in multi laminated construction, such as through a steel bracket into masonry.

NEW

Hamm

erSDS Plus

For soft to medium

hard materials - Concrete &

Masonry

Suitable for all SDS plus hamm

er drilling machines

ForBlueplug

8.0mm

x 160

Hamm

erlus

For soft to medium

hard materials - Concrete &

Mason

0x 160

TCT

www.sutton.com.au8

Suits all SDS-plus hammer machines.

Long pitch permits quick removal of aggregates.

Self-centering tip. Clean, accurate holes.

SDS-plus

spiral f ute

2 cutting edges

Stone

Concrete

Green concrete

pErForManCE

5 3/16 White • x 110 SDS Plus 370115010x 160 SDS Plus 370115110

6 - Red • x 110 SDS Plus 370115012x 160 SDS Plus 370115112x 210 SDS Plus 370115212

6.5 1/4 Green • x 110 SDS Plus 370115013x 160 SDS Plus 370115113x 210 SDS Plus 370115213

8 5/16 Blue • x 110 SDS Plus 370115016x 160 SDS Plus 370115116x 210 SDS Plus 370115216

10 3/8 Orange • x 160 SDS Plus 370115120x 210 SDS Plus 370115220

12 - Grey • x 160 SDS Plus 370115124x 210 SDS Plus 370115224

13 1/2 x 160 SDS Plus 37011512614 9/16 x 160 SDS Plus 370115128

x 210 SDS Plus 37011522816 5/8 Black • x 210 SDS Plus 370115232

Set

• • • • • 5, 6, 6.5, 8, 10 x 160 SDS Plus 370115405Merchandiser Pieces2 Tier5 each5 each 3 each5 each 3 each2 each

(110mm): 5.0, 6.0, 6.5, 8.0mm(160mm): 5.0, 6.0, 6.5, 8.0, 10.0, 12.0mm (160mm): 13.0, 14.0mm(210mm): 6.0, 6.5, 8.0, 10.0mm (210mm): 12.0, 14.0, 16.0mm (160mm): 5 piece set

87 370115300

Product Group A0608 A0608 A0608

Surface Finish Sandblasted Sandblasted Sandblasted

Material TCT TCT TCT

Application Standard Fixing Single Brick Double Brick

Packaging Single Pack Single Pack Single Pack

Order Quantity 1 1 1Diameter Plug Colour OA Length Shank Item # Price Item # Price Item # Pricemm inch

www.sutton.com.au9

Prices exclude GST

Drill Bits Runner +• Performances:

The flute with a long pitch permits a quick removal of the aggregates (dust); the new sandblasted finish strengthens the body of the drill in surface while guaranteeing a good flexibility.

• Versatile Drill: Ideal for soft and medium hard materials and for wet concrete

R u n n e r + S D S P l u s D r i l l s

NEW

TCT

www.sutton.com.au10

Self-centering tip. 160º angle. Maximised

chiseling effect and spalling of the concrete.30% faster than

conventional drills.

Available range in SDS-plus and

SDS-multifit Shanks.

SDS-plus SDS-multif t

Combining a compression channel with

a depression chamber gives an instant result:

perfectly controlled dust removal!

square spiral

concrete breaker tip

Brick

Granite

Stone

Concrete

pErForManCE

Product Group A0608 A0608

Shank SDS Plus SDS Multi-fit

Diameter OA Length

Flute Length Item # Price Item # Price

5 110 50 008366 152189160 100 008410 152264

5.5 110 50 023253 152196160 90 152271160 100 023277

6 110 50 008373 152202160 100 008427160 90 152288210 150 008533 152400260 200 008663310 250 023291

6.5 110 50 023260 152219160 90 152295160 100 020849210 150 020856 152417260 200 076389

7 110 50 152226160 90 152301160 100 008434

8 110 50 008397 152233160 90 152318160 100 008441210 150 008540 152431260 200 008670310 250 023307410 350 008786460 400 023413610 550 008908

1000 940 0090049 160 100 00845810 110 50 008403 152257

160 90 152332160 100 008465210 150 008564 152455260 200 008687 152592310 250 023314410 350 008793 152745460 400 023420610 550 008915

1000 940 00901111 160 100 00847212 160 90 152356

160 100 008489210 150 008571 152479260 200 008694 152615310 250 023321410 350 008809 152769460 400 023437610 550 008922

1000 940 00902813 160 90 152363

160 100 008496210 150 008588 152486260 200 008700 152622

Product Group A0608 A0608

Shank SDS Plus SDS Multi-fit

Diameter OA Length

Flute Length Item # Price Item # Price

310 250 054950410 350 008816 152776460 400 023444610 550 008939

14 160 90 152370160 100 008502210 150 008595 152493260 200 008717 152639310 250 023338410 350 008823460 400 023451610 550 0089461000 940 009035

15 160 100 00851916 160 90 152394

160 100 008526210 150 008618 152516260 200 008731 152653310 250 023352410 350 008847 152806460 400 023475610 550 0089531000 940 009042

18 210 150 008625 152523260 200 008748310 250 023369410 350 008854460 400 023482610 550 0089601000 940 009059

20 210 150 008632 152530260 200 008755 152684310 250 023376410 350 008878 152820460 400 023505610 550 0089771000 940 009066

22 210 150 008649260 200 008762 152691310 250 023383410 350 008885 152837460 400 023512610 550 008984

24 210 150 014817260 200 014824 152707310 250 023390410 350 014831460 400 023529610 550 027367

25 210 150 008656260 200 008779 152714310 250 023406410 350 008892 152851460 400 023536610 550 008991

www.sutton.com.au11

Prices exclude GST

T w i s t e r S D S P l u s / S D S M u l t i - f i t D r i l l s

Twister SDS Plus / SDS Multi-fitThe Twister style of SDS drills has a unique flute style that accelerates dust removal. This results in a very fast cycle time 30% faster than conventional brands. The unique tip is designed to reduce wandering.SDS Plus suits most SDS power tools excluding later model Ramset.SDS Multi Fit also suits older Ramset power tools. Complies with PGM standards and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.

TCT

www.sutton.com.au12

Suits all SDS-plus hammer machines.

SDS-plus

triple f uted spiral

Self-centering tip. Drills through

reinforced concrete.

3 cutting edges

Granite

Stone

Concrete

Reinforced concrete

pErForManCE

Brick

Combining a compression channel with

a depression chamber gives an instant result:

perfectly controlled dust removal!

6 110 50 SDS Plus 029385

160 100 SDS Plus 029408

210 150 SDS Plus 029446

310 250 SDS Plus 084186

6.5 110 50 SDS Plus 051577

160 100 SDS Plus 051584

210 150 SDS Plus 093607

310 250 SDS Plus 059443

8 110 50 SDS Plus 029392

160 100 SDS Plus 029415

210 150 SDS Plus 029453

310 250 SDS Plus 029484

460 400 SDS Plus 093034

10 110 50 SDS Plus 055728

160 100 SDS Plus 029422

210 150 SDS Plus 029460

310 250 SDS Plus 029491

460 400 SDS Plus 054295

12 160 100 SDS Plus 029439

210 150 SDS Plus 029477

310 250 SDS Plus 029507

460 400 SDS Plus 054301

13 160 100 SDS Plus 093591

210 150 SDS Plus 093638

14 160 100 SDS Plus 077911

210 150 SDS Plus 077935

310 250 SDS Plus 077959

460 400 SDS Plus 054318

16 210 150 SDS Plus 084155

310 250 SDS Plus 054264

460 400 SDS Plus 054325

18 210 150 SDS Plus 084162

310 250 SDS Plus 054271

460 400 SDS Plus 054332

20 210 150 SDS Plus 084179

310 250 SDS Plus 054288

460 400 SDS Plus 054349

Product Group A0608

Surface Finish Sandblasted

Material TCT

Point Type & Angle 3 Cutting Edge Self Centering

Packaging Single Pack

Order Quantity 1

Diameter OA Length Flute Length Shank Item # Price

www.sutton.com.au13

Prices exclude GST

Booster SDS - PlusThe Booster style of SDS drills has a unique flute style that accelerates dust removal. This results in a very fast cycle time 30% faster than conventional brands. The unique carbide point design with 3 cutting edges allows the booster to drill through reinforced concrete mesh. The drill will not snag which causes tip damage on conventional style masonry bits. SDS Plus suits most SDS power tools excluding later model Ramset.Complies with PGM standards and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.

B o o s t e r S D S P l u s D r i l l s

TCT

www.sutton.com.au14

Booster head

SDS-max

triple f uted spiral

Booster technology with SDS-max shanks.

Combining a compression passage

and depression chamber to accelerate the expulsion

of dust.

Self-centering tip. Drills through

reinforced concrete.

Stone

Hard Stone

Concrete

Reinforced concrete

pErForManCE

Granite

12 340 200 SDS Max 111806

540 400 SDS Max 111813

14 340 200 SDS Max 111820

540 400 SDS Max 111837

16 340 200 SDS Max 119383

540 400 SDS Max 119413

18 340 200 SDS Max 119390

540 400 SDS Max 119420

20 340 200 SDS Max 119406

540 400 SDS Max 119437

Product Group A0608

Surface Finish Sandblasted

Material TCT

Point Type & Angle 3 Cutting Edge Self Centering

Packaging Single Pack

Order Quantity 1

Diameter OA Length Flute Length Shank Item # Price

www.sutton.com.au15

Prices exclude GST

B3Max SDS - MaxThis range suits all SDS Max Rotary Hammer Drills. Suited to the drilling of reinforced concrete mesh.B3Max has Booster Plus tip geometry with SDS Max shank.Complies with PGM standards and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.

B 3 M a x S D S M a x D r i l l s

TCT

www.sutton.com.au16

Suits all SDS-max hammer machines.

SDS max

With centering tip. Does not bind in concrete.

Improved hole concentricity.

Long life and robustness. Perfectly controlled

dust removal. Reduced vibration

double f uted spiral

6 cutting edges

Granite

Stone

Concrete

Reinforced concrete

pErForManCE

16 340 200 SDS Max 004849

540 400 SDS Max 004955

690 550 SDS Max 005327

920 780 SDS Max 005464

18 340 200 SDS Max 004856

540 400 SDS Max 005136

690 550 SDS Max 005334

920 780 SDS Max 005471

20 340 200 SDS Max 004870

540 400 SDS Max 005150

690 550 SDS Max 005358

920 780 SDS Max 005495

1300 850 SDS Max 063297

1500 850 SDS Max 024120

22 340 200 SDS Max 004887

540 400 SDS Max 005167

690 550 SDS Max 005365

920 780 SDS Max 005501

1300 850 SDS Max 063303

24 340 200 SDS Max 004894

540 400 SDS Max 005174

690 550 SDS Max 005372

920 780 SDS Max 005518

1500 850 SDS Max 024137

25 340 200 SDS Max 004900

540 400 SDS Max 005181

690 550 SDS Max 005389

920 780 SDS Max 005525

1300 850 SDS Max 068193

1500 850 SDS Max 037625

26 340 200 SDS Max 004917

540 400 SDS Max 005198

690 550 SDS Max 005396

28 340 200 SDS Max 068261

540 400 SDS Max 005204

690 550 SDS Max 005402

920 780 SDS Max 005549

1300 850 SDS Max 063310

1500 850 SDS Max 024144

30 340 200 SDS Max 028760

540 400 SDS Max 005228

690 550 SDS Max 005426

920 780 SDS Max 005563

32 340 200 SDS Max 068278

540 400 SDS Max 005235

690 550 SDS Max 005433

920 780 SDS Max 005570

1300 850 SDS Max 028746

1500 850 SDS Max 024151

35 1300 850 SDS Max 063327

36 340 200 SDS Max 063440

540 400 SDS Max 005259

690 550 SDS Max 005457

920 780 SDS Max 005594

1300 850 SDS Max 063334

1500 850 SDS Max 024168

38 340 200 SDS Max 063457

540 400 SDS Max 023093

690 550 SDS Max 028685

40 340 200 SDS Max 063464

540 400 SDS Max 023109

690 550 SDS Max 028692

920 780 SDS Max 005600

1500 850 SDS Max 063365

42 340 200 SDS Max 063402

540 400 SDS Max 023116

690 550 SDS Max 063389

920 780 SDS Max 021464

1300 850 SDS Max 063341

1500 850 SDS Max 063372

45 340 200 SDS Max 063471

540 400 SDS Max 063419

690 550 SDS Max 063396

920 780 SDS Max 024113

1300 850 SDS Max 063358

1500 850 SDS Max 027091

Product Group A0608

Surface Finish Sandblasted

Material TCT

Point Type & Angle 6 Cutting Edge Self Centering

Packaging Single Pack

Order Quantity 1

Diameter OA Length Flute Length Shank Item # Price

Product Group A0608

Surface Finish Sandblasted

Material TCT

Point Type & Angle 6 Cutting Edge Self Centering

Packaging Single Pack

Order Quantity 1

Diameter OA Length Flute Length Shank Item # Price

www.sutton.com.au17

Prices exclude GST

Ultimax SDS - MaxThe Ultimax style of SDS drills has a wide spiral flute for easy drilling, penetration and dust removal. The 3 carbide tips and 6 cutting edges gives this product the ability to cut through reinforced concrete mesh, granite, marble, CSRTM Hebel®, brick, stone and hard stone.This range suits all SDS Max Rotary Hammer Drills.Complies with PGM standards and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.

U l t i m a x S D S M a x D r i l l s

PlainShank

www.sutton.com.au18

Parallel shank.

Tungsten Carbide Tipped. 4 edge spear design.

Shaves rather than cuts.

4 edge tip

shank

Cement Sheet

Tile

Glass

pErForManCE

3.0 169668

4.0 169675

5.0 169743

6.0 169699

6.5 411187

8.0 169712

10.0 169729

12.0 169736

Product Group A0608

Surface Finish Bright

Material TCT

Point Type & Angle 4 Edge Spear

Packaging Single Pack

Order Quantity 1

Diameter Item # Price

www.sutton.com.au19

Prices exclude GST

G l a s s & T i l e D r i l l s

Glass & Tile Drill BitsSometimes called Spear Point Drills. Precision ground carbide tipped for exact drilling. High tempered brazed carbide tip. This design is intended to produce clean holes in ceramic tiles, porcelain and glass. NOTE: not suitable for toughened glass. These drill bits need to be used at a slow speed, non impact, with suitable coolant.

HollowShank

www.sutton.com.au20

tip

shank

Hollow core allows internal coolant.

Diamond resin bonded.For wet drilling only.

Glass (not safety)

Ceramic

Terracotta

Sandstone

pErForManCE

Glazed Tile

Product Group A0606

Surface Finish Bright

Material Diamond Plated

Point Type & Angle -

Packaging Single Pack

Order Quantity 1

Diameter Item # Price

6.0 148010006

8.0 148010008

10.0 148010010

12.0 148010012

15.0 148010015

20.0 148010020

25.0 148010025

www.sutton.com.au21

Prices exclude GST

D i a m o n d C o r e B i t s

Diamond Core BitsDiamond Tile Core bits have diamond encrusting to cut through glazed and polished porcelain, sandstone, terracotta and ceramics.Suitable for tiling, plumbing, electrical, building trade and DIY handy person applications.• Now cuts to ±0.2mm.

HexShank

www.sutton.com.au22

shank

tip

shank

10mm hexagonal

shank.

Core extraction cavity.

Trade quality.

Diamond segment tip for long life. Can be dressed

for optimal performance

Marble

Glazed & Polished

Fully Vitrified

Monocottura

pErForManCE

Sandstone

Granite

Porcelain

Terracotta

Standard Ceramics

Drill Bit Range

6 Red • 10mm Hex 3000 D605 0600

7 Green • 10mm Hex 3000 D605 0700

8 Blue • 10mm Hex 3000 D605 0800

10 Orange • 10mm Hex 3000 D605 1000

12 Grey • 10mm Hex 3000 D605 1200

15 Black • 10mm Hex 3000 D605 1500

20 10mm Hex 3000 D605 2000

25 10mm Hex 3000 D605 2500

Dressing Stone D605 ST01

Water Dripper Suits 5-35mm drills D605 WAT1

Merchandiser Contents Pieces D605 MER1

1 each2 each

7, 10, 12, 15, 20, 25, Stone6, 8

11

Product Group A0608

Surface Finish Bright

Material Diamond Composite

Point Type & Angle Segment Tip

Packaging Single Pack

Order Quantity 1

Diameter Plug Colour Shank Speed RPM* Item # Price

water dripper

*Wet drilling

BlueCERAM

www.sutton.com.au23

Prices exclude GST

B l u e C e r a m D i a m o n d C o r e B i t s

NEWBlue Ceram - Diamond Core BitSutton Tools Blue Ceram diamond core bits are manufactured to precision standards from the highest quality materials. New diamond segment technology enables the bit to be dressed. They are the ideal choice for the professional Trade & DIY person.• Diamond segment tip• Core extraction cavity• 10mm hexagonal shank

Instructions For Use1 Water the drilling area. To avoid

drill slipping start with a 45º angle.2 After the hole is started gradually straighten up the drill.3 Make a swinging movement to allow for dust evacuation.4 Make sure the core has been removed from bit after drilling.

Helpful Hints• Do not use with hammer setting

as this will damage the bit and tile.• Do not press strongly on the tool - let it do the work • Cutting speed with water <3000 RPM• Cutting speed dry <11000 RPM• Dressing the bit will increased performance

1

2

3

4

A heating up (darkened segment) causes a lower cutting power and needs to be dressed for better performance.

Dressing refreshes the cutting power of the tool. To dress the tool, make a hole in the stone with slow speed.

Dressing

Standard Ceramics

Terracotta

Porcelain

Sandstone

Marble

Polished Sandstone

Monocottura & Fully Vitrified

Glazed

TCT

www.sutton.com.au24

SDS-max

SDS-plus

Ø 30 to 125mmHeavy duty taper crown carbide

core bit for building, plumbing, and restoration work. For al types of

hammer drills over 900W.

Ø 25 to 90mmLight duty for electrical

equipment and door frames. For impact drills and light hammer drills

not exceeding 700W.

Granite

Stone

Concrete

Reinforced concrete

pErForManCE

Brick

Masonry Hammer Carbide Core Bits (Light Duty)25 60 5 SDS Plus 01593730 60 5 SDS Plus 01594435 60 5 SDS Plus 01595140 60 6 SDS Plus 01596845 60 6 SDS Plus 01597550 60 7 SDS Plus 01598260 60 8 SDS Plus 01599966 60 8 SDS Plus 01600268 60 8 SDS Plus 02425070 60 8 SDS Plus 01601980 60 9 SDS Plus 01602690 60 10 SDS Plus 016033

*Core bits & adaptors sold separatelyAdaptors For Masonry Carbide Core Bits (Including Pilot Drill)

90 SDS Plus 063730150 SDS Plus 016057200 SDS Plus 016064300 SDS Plus 016071135 Hexagonal 063747

Taper Crown Hammer Carbide Core Bits (Heavy Duty)30 90 5 SDS Max 01608835 90 5 SDS Max 01609540 90 6 SDS Max 01274545 90 6 SDS Max 01610150 90 7 SDS Max 01611860 90 8 SDS Max 01275266 90 8 SDS Max 01276970 90 8 SDS Max 01612580 90 9 SDS Max 01613290 90 10 SDS Max 016149100 90 11 SDS Max 012776110 90 11 SDS Max 016156125 90 12 SDS Max 016163

*Core bits & adaptors sold separatelyAdaptors For Crown Core Bit (Excluding Pilot Drill)

220 SDS Max 016194420 SDS Max 012790700 SDS Max 016200900 SDS Max 063969

Crown Pilot Drill Taper centring drill bit 11x120 012806Drift Key 012813

Product Group A0608

Surface Finish Sandblasted

Material High Tensile Body, TCT

Point Type & Angle

Packaging Single Pack

Order Quantity 1

Diameter Working Length Teeth Shank Item # Price

Masonry Adaptor

Masonry Hammer Carbide Core Bits (Light Duty)

Crown Adaptor Crown PilotDrift Key

Taper Crown Hammer Carbide Core Bits (Heavy Duty)

www.sutton.com.au25

Prices exclude GST

T C T C o r e B i t s

Core Bits SDS Plus & SDS MaxDiager core bits come with tungsten carbide tipped teeth to suit both SDS Plus and SDS Max power tools. Core bits are used for larger holes in masonry type products. The core tends to crumble under the hammer operation. They are used predominantly in plumbing and electrical applications such as drainage and water pipes, heating pipes, switches, junction and distribution boxes.

www.sutton.com.au26

Brick

Stone

Concrete

pErForManCE

For general purpose chiselling & breaking work in brickwork,

concrete & loose stone.

For repointing, taking out whole bricks intact, removing tiles &

plaster.

For cutting narrow channels into concrete.

concrete chasing

toothed

f at

For general purpose chiselling & breaking work in brickwork,

concrete & loose stone.

For easy removal of tiles (with ergonomically

angled working end).

For cutting channels in limestone, concrete, brick

& pumice block. Ideal for cabling & plumbing

applications.

brick chasing

angle headpointed

SDS-Plus

Concrete Chasing 22 250 SDS Plus 063686

Flat 20 250 SDS Plus 063518

40 200 SDS Plus 063525

Angled 40 200 SDS Plus 063648

Pointed 14 250 SDS Plus 022171

SDS-Max

Brick Chasing 35 380 SDS Max 063716

Concrete Chasing 26 300 SDS Max 063693

Toothed 40 280 SDS Max 063662

Flat 24 280 SDS Max 063549

24 400 SDS Max 061514

24 600 SDS Max 075368

50 360 SDS Max 063556

80 300 SDS Max 063563

115 350 SDS Max 063570

Angled 50 300 SDS Max 063655

Pointed 18 280 SDS Max 063488

18 400 SDS Max 061521

18 600 SDS Max 063495

Product Group A0608

Surface Finish Sandblasted

Material High Tensile Steel

Point Type & Angle Application

Packaging Single Pack

Order Quantity 1

Type Size OA Length Shank Item # Price

Poi

nted

Flat

Ang

led

Toot

hed

Bric

k C

hasi

ng

Con

cret

e C

hasi

ng

www.sutton.com.au27

Prices exclude GST

C h i s e l s S D S P l u s / S D S M a x

Chisels SDS Plus & SDS MaxRanges of chisels for both SDS Plus and SDS Max. These tools are used in construction, renovation, demolition, breaking through brick walls, knocking off plaster and ripping up asphalt. Specially toughened steel and optimum cutter geometry ensure long life and fast, efficient work.

ShanksParallel / Plain Shank

PlainShank

The straight shank is the most usual style on modern drill bits, by number manufactured. It is most often made with the same diameter as the drill bit, for economy. It’s then held in a 3-jaw drill chuck. Very small bits can have straight shanks larger than the drill diameter, often for holding in a standard size collet. Large drill bits can have straight shanks smaller than their drill diameter, so that medium-size chucks can be used to drill large holes. Such a drill bit is called reduced-shank or a blacksmith’s drill. • Can be held in a collet chuck • Can be held in a drill chuck, the commonest sort • Very accurate centering • Low torque transmission

Hex shank

HexShank

The flats of a hex shank can either be machined on a round shank or can be the natural flats of hex bar stock. A hex shank can be grasped by a 3-jaw drill chuck, or can be held in a custom chuck specifically for hex shanks. 1/4 inch hex shanks are common for machine screwdriver bits, and have spread from that application to be used for drill bits that are compatible with screwdriver machinery.• Can be held in a drill chuck • Can be held in a screwdriver bit chuck • High torque transmission • Moderately accurate centring • Cannot be held in a collet

SDS shankThe SDS shank has the advantage of a simple spring-loaded chuck, so that bits can be chucked with a simple and quick hand action. Further, the shank and chuck are uniquely suited to hammer drilling in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. So, SDS shanks are most often seen on masonry drills, for which hammer drilling action is most helpful.

SDS is available in four sizes, SDS, SDS plus (or SDS-plus or SDS+), SDS-Top and SDS-max. SDS-plus is the most common by count of tools manufactured, with masonry drills from 5mm diameter to 30mm diameter ordinarily available.

The SDS bit was developed in 1975 and the name comes from the German saying “Steck - Dreh - Sitz” (Insert - Twist - Stay).

German-speaking countries may use “Spannen Durch System” (Clamping System), though most use “Special Direct System” for international purposes.• Superb hammer drilling performance • Drills with a “rotation-stop” mode can use chiselling bits • One-handed quick chucking operation • Can only be held in an SDS chuck • High torque transmissionThe flute (spiral) with a long pitch (lead) permits a quick removal of the aggregates (dust) the new finishing (treatment) “sandblasted” strengthens the body of the drill in the surface while guaranteeing good flexibility. Ideal for soft and medium hard materials and for wet concrete. The shank is suitable for all SDS plus hammer drilling machines.

HollowShank

34mm

28.5mm

25mm

27.5mm

25mm

18m

m10

mm

10m

m

68mm

64mm

61.5mm

34mm

28.5mm

SDS Multi

SDS Plus

SDS Max

SDS Multi

SDS Plus

SDS Max

25mm

27.5mm

25mm

18m

m10

mm

10m

m

68mm

64mm

61.5mm

www.sutton.com.au28

Performance SummaryMaterial Selection Chart

Environmental StatementDiager and Sutton masonry drills are certified ISO 14001 for sustainable development. These products contribute to environmental protection by a “sandblasted” surface treatment which guarantees zero heavy metals and by a protection called “without VOC (Volatile Organic Compounds)” meeting the European directive 1999/13CE

Icon Descriptions Country of origin Where the product is Manufactured and sourced.

Complies with PGM standards (PGM stands for “Prufgemeinschaft Mauerbohrer” - drill bit testing) and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. This marking is the proof for the suitability of the masonry drill bit. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.

5 Best solution to perform task

✘ Not recommended

4 Most suitable to perform task

3 More suitable to perform task

2 Suitable to perform task

1 Adequate to perform task1 Adequate to perform task

pErForManCE IndICator

Material Selection Chart

Conc

rete

Gree

n Co

ncre

te

Rein

forc

ed

Conc

rete

Ston

e

Bric

k

Gran

ite

Mar

ble

Cera

mic

s

Glas

s

Fibr

o Ce

men

t

CSR

Hebe

l

Tim

ber

Stee

l

Masonry Drill 5 5 ✘ 4 4 1 1 ✘ ✘ 5 4 ✘ ✘

Penetrator Masonry Drill 5 5 ✘ 4 4 1 1 ✘ ✘ 5 4 ✘ ✘

Multi Purpose Drill 3 3 4 3 3 3 1 1 1 3 3 2 2

Runner+ 3 3 ✘ 3 3 3 ✘ ✘ ✘ 3 3 ✘ ✘

Twister SDS Plus 5 5 ✘ 4 4 3 ✘ ✘ ✘ 4 4 ✘ ✘

Booster SDS Plus 4 4 5 4 4 4 3 ✘ ✘ 3 5 ✘ ✘

B3Max SDS Max 4 4 5 4 4 4 3 ✘ ✘ 3 5 ✘ ✘

Ultimax SDS Max 5 5 3 5 5 2 2 ✘ ✘ 3 5 ✘ ✘

Glass & Tile Drill ✘ ✘ ✘ ✘ ✘ ✘ ✘ 5 5 3 ✘ ✘ ✘

TCT Core Bits 5 4 3 3 4 4 4 3 ✘ 3 ✘ ✘ ✘

Diamond Core Bit ✘ ✘ ✘ ✘ ✘ 1 1 3 2 ✘ ✘ ✘ ✘

Blue Ceram ✘ ✘ ✘ ✘ ✘ 4 4 5 ✘ ✘ ✘ ✘ ✘

Chisels SDS Plus / SDS Max 5 5 ✘ 5 5 ✘ ✘ ✘ ✘ 5 5 ✘ ✘

www.sutton.com.au29

4999

8006

9_06

10

9311963

512655

Sutton Tools Pty Ltd 100% Australian Owned Company

Head Office 378 Settlement Road Thomastown 3074 Victoria Australia T +61 3 9280 0800 F +61 3 9464 0015 E sutton@sutton.com.au

Customer Service T 1800 335 350 F 1800 333 127 E cservice@sutton.com.au

www.sutton.com.au

Distributed By: