Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
M16 Edition
METALLIC HOSES AND EXPANSION JOINTS
WWW.HEBDRAULIQUE.CA
Hoses can be manufactured in different type of stainless such as 304, 321 and 316. They are also available in exotic alloys
such as ''Monel'' and ''Inconel''. Most of the time the braid is in
304 stainless steel but is also available in 316.
In this flyer, Hebdraulique is showing most of its standard products. Those
items are manufactured and placed on shelves ready to be shipped.
Our fabrication procedures meet and exceed the ''CRN'' code CSA-B51/ASME-Section VIII Div. 1 du Code ASME/ASME B31.3 - Process Piping.
Do not hesitate to contact our representatives at 514-327-5966 or 1-800-461-5966 or by email [email protected]
Important notice: Stainless steel hoses are often operating on high pressure gas or steam systems. Standard precautions should be taken when installing and regular inspections must be done. Other precautions should be taken to protect your staff from possible leak or burst. Piping attached to stainless steel hoses help to properly align and anchor. Movement should not be greater the specification allowed by the assembly. This information does not constitutes a warranty. Hebdraulique will not assume any responsabillity or obligations regarding your installation. Any installation or application should be verified by an independant third party.
www.hebdraulique.ca
HOSES MADE IN CANADA
Every working day, we are doing custom assemblies respecting requests and specifications provided by our customer. We are working from 1/4'' to 12'' diameter at our Montreal fabrication plant. Each and every
assembly passes a leak test. We also provide on request pressure and burst testing at the same facility. We can test up to 60 000 psi if needed.
The use of our stainless steel hoses on pumps, compressors and
mechanical equipments will surely improve the operation of your
system.
Hebdraulique stainless steel hoses are manufactured to control
vibration, reduce noise transmission and prevent from hammering. They can also prevent misalignment and
compensate for some thermal movements.
mailto:[email protected]
LARGE INVENTORY READY TO BE SHIPPED
Whether it's for a flexible stainless steel hose, rubber gaskets, compensators or guides piping, we can undoubtedly meet your urgent orders.
Find out about areas served by our free delivery.
1-800-461-5966 www.hebdraulique.ca [email protected]
1
Business hours Monday 7h30 - 7 P.M. Tuesday 7h30 - 7 P.M.
Wednesday 7h30 - 7 P.M. Thursday 7h30 - 7 P.M.
Friday 7h30 - P.M.
mailto:[email protected]
SERIES MFSN AND MFSNS Standard assemblies come with NPT males in steel or stainless steel. 321
stainless steel inner convoluted closed pich hoses, 304 stainless braid and braid bands.
STANDARD METAL HOSES
Model MNPT Diam x length Lateral offset 70oF / 210C 500oF / 260oCMFSN-008 Steel 1/2'' x 12'' 0,600'' 1137 886MFSN-008-18 Steel 1/2'' x 18'' 1,800'' 1137 886MFSN-008-24 Steel 1/2'' x 24'' 3,65'' 1137 886
MFSN-012 Steel 3/4'' x 12'' 0,500'' 910 710MFSN-012-18 Steel 3/4'' x 18'' 1,500'' 910 710MFSN-012-24 Steel 3/4'' x 24'' 3,025'' 910 710
MFSN-016 Steel 1'' x 12'' 0,430'' 711 555MFSN-016-18 Steel 1'' x 18'' 1,300'' 711 555MFSN-016-24 Steel 1'' x 24'' 2,660'' 711 555
MFSN-020 Steel 1-1/4'' x 12'' 0,250'' 568 443MFSN-020-18 Steel 1-1/4'' x 18'' 0,960'' 568 443MFSN-020-24 Steel 1-1/4'' x 24'' 1,960'' 568 443
MFSN-024 Steel 1-1/2'' x 12'' 0,250'' 426 332MFSN-024-18 Steel 1-1/2'' x 18'' 0,840'' 426 332MFSN-024-24 Steel 1-1/2'' x 24'' 1,700'' 426 332
MFSN-032 Steel 2'' x 12'' 0,200'' 398 310MFSN-032-18 Steel 2'' x 18'' 0,670'' 398 310MFSN-032-24 Steel 2'' x 24'' 1,440'' 398 310
MFSN-040 Steel 2-1/2'' x 14'' 0,200'' 341 266MFSN-048 Steel 3'' x 14'' 0,180'' 256 200MFSN-064 Steel 4'' x 18'' 0,320'' 227 177
MFSNS-008 Stain. 1/2'' x 12'' 0,600'' 1137 886MFSNS-008-18 Stain. 1/2'' x 18'' 1,800'' 1137 886MFSNS-008-24 Stain. 1/2'' x 24'' 3,65'' 1137 886
MFSNS-012 Stain. 3/4'' x 12'' 0,500'' 910 710MFSNS-012-18 Stain. 3/4'' x 18'' 1,500'' 910 710MFSNS-012-24 Stain. 3/4'' x 24'' 3,025'' 910 710
MFSNS-016 Stain. 1'' x 12'' 0,430'' 711 555MFSNS-016-18 Stain. 1'' x 18'' 1,300'' 711 555MFSNS-016-24 Stain. 1'' x 24'' 2,660'' 711 555
MFSNS-020 Stain. 1-1/4'' x 12'' 0,250'' 568 443MFSNS-020-18 Stain. 1-1/4'' x 18'' 0,960'' 568 443MFSNS-020-24 Stain. 1-1/4'' x 24'' 1,960'' 568 443
MFSNS-024 Stain. 1-1/2'' x 12'' 0,250'' 426 332MFSNS-024-18 Stain. 1-1/2'' x 18'' 0,840'' 426 332MFSNS-024-24 Stain. 1-1/2'' x 24'' 1,700'' 426 332
MFSNS-032 Stain. 2'' x 12'' 0,200'' 398 310MFSNS-032-18 Stain. 2'' x 18'' 0,670'' 398 310MFSNS-032-24 Stain. 2'' x 24'' 1,440'' 398 310
MFSNS-040 Stain. 2-1/2'' x 14'' 0,200'' 341 266MFSNS-048 Stain. 3'' x 14'' 0,180'' 256 200MFSNS-064 Stain. 4'' x 18'' 0,320'' 227 177
Diameter, length , movement and working pressureWorking pressure PSI
2
Braidsleeve
NPT sch-40
Braiding
Convoluted hose
STANDARD METAL HOSESSERIES MFBA, MFBG AND MFBN
Standard assemblies come with #150 carbon steel, 304 or 316 stainless flanges.
Diameter , length , movement and working pressureWorking pressure ''PSI''
ModelFlangedends#150
Diam x length Lateral offset 70oF / 210C 500oF / 260oC
MFBA-032 Steel 2'' x 12'' 0,250'' 275 212MFBG-032 Stain 304 2'' x 12'' 0,250'' 275 212MFBN-032 Stain 316 2'' x 12'' 0,250'' 275 212
MFBA-040 Steel 2-1/2'' x 12'' 0,250'' 275 212MFBG-040 Stain 304 2-1/2'' x 12'' 0,250'' 275 212MFBN-040 Stain 316 2-1/2'' x 12'' 0,250'' 275 212
MFBA-048 Steel 3'' x 12'' 0,250'' 256 197MFBG-048 Stain 304 3'' x 12'' 0,250'' 256 197MFBN-048 Stain 316 3'' x 12'' 0,250'' 256 197
MFBA-064 Steel 4'' x 15'' 0,375'' 227 175MFBG-064 Stain 304 4'' x 15'' 0,375'' 227 175MFBA-064 Stain 316 4'' x 15'' 0,375'' 227 175
MFBA-080 Steel 5'' x 18'' 0,500'' 170 131MFBG-080 Stain 304 5'' x 18'' 0,500'' 170 131MFBN-080 Stain 316 5'' x 18'' 0,500'' 170 131
MFBA-096 Steel 6'' x 18'' 0,375'' 142 109MFBG-096 Stain 304 6'' x 18'' 0,375'' 142 109MFBN-096 Stain 316 6'' x 18'' 0,375'' 142 109
MFBA-128 Steel 8'' x 18'' 0,250'' 234 180MFBG-128 Stain 304 8'' x 18'' 0,250'' 234 180MFBN-128 Stain 316 8'' x 18'' 0,250'' 234 180
MFBA-160 Steel 10'' x 18'' 0,250'' 230 177MFBG-160 Stain 304 10'' x 18'' 0,250'' 230 177MFBN-160 Stain 316 10'' x 18'' 0,250'' 230 177
MFBA-192 Steel 12'' x 18'' 0,250'' 161 124MFBG-192 Stain 304 12'' x 18'' 0,250'' 161 124MFBN-192 Stain 316 12'' x 18'' 0,250'' 161 124
3
Braid sleeveBraiding
Convoluted hose
Model MNPT Hexagone Diam x length Lateral offset 70oF / 210C 400oF / 205oC
MFCH-008 Copper 1/2'' x 12'' 0,600'' 500 361
MFCH-012 Copper 3/4'' x 12'' 0,500'' 500 391
MFCH-016 Copper 1'' x 12'' 0,430'' 500 247
MFCH-020 Copper 1-1/4'' x 12'' 0,250'' 500 218
MFCH-024 Copper 1-1/2'' x 12'' 0,250'' 500 204
MFCH-032 Copper 2'' x 12'' 0,200'' 435 182
ModelSocket weld fem. conn. Diam x length Lateral offset 70oF / 210C 400oF / 205oC
MFCC-008 Copper 1/2'' x 12'' 0,600'' 500 361
MFCC-012 Copper 3/4'' x 12'' 0,500'' 500 391
MFCC-016 Copper 1'' x 12'' 0,430'' 500 247
MFCC-020 Copper 1-1/4'' x 12'' 0,250'' 500 218
MFCC-024 Copper 1-1/2'' x 12'' 0,250'' 500 204
MFCC-032 Copper 2'' x 12'' 0,200'' 435 182
Diameter, length , movement and working pressureWorking pressure ''PSI''
Diameter , length , movement and working pressureWorking pressure ''PSI''
COPPER FLEXIBLE METAL HOSESSERIES MFCH AND MFCC
Standard copper weld ends '' Vibra type'' assemblies. For installation on copper lines and cooling systems
4
MNPT hexagoneConvoluted hose
Braid Braid sleeve
Socket weld female connector
Concoluted hose
Braid Braid sleeve
ModelMNPT
HexagoneDiam x
length Lateral offset 70oF / 210C 500oF / 260oCMFHA-008 Steel 1/2'' x 12'' 0,600'' 1137 886MFHC-008 Stainless 1/2'' x 12'' 0,600'' 1137 886
MFHA-012 Steel 3/4'' x 12'' 0,500'' 910 710MFHC-012 Stainless 3/4'' x 18'' 1,500'' 910 710
MFHA-016 Steel 1'' x 12'' 0,430'' 711 555MFHC-016 Stainless 1'' x 18'' 1,300'' 711 555
MFHA-020 Steel 1-1/4'' x 12'' 0,250'' 568 443MFHC-020 Stainless 1-1/4'' x 18'' 0,960'' 568 443
MFHA-024 Steel 1-1/2'' x 12'' 0,250'' 426 332MFHC-024 Stainless 1-1/2'' x 18'' 0,840'' 426 332
MFHA-032 Steel 2'' x 12'' 0,200'' 398 310MFHC-032 Stainless 2'' x 18'' 0,670'' 398 310
Diameter, length, movement and working pressureWorking pressure ''PSI''
STANDARD METAL HOSES HEX MALESSERIES MFHA AND MFHC
Standard assemblies come with Zinc plated steel or 316 stainless steel Hex NPT males
5
Convoluted hose
Braid Braid sleeve
MNPT hexagone
Diameter , length , movement and working pressureWorking pressure ''PSI''
ModelGrooved
endsDiam. x
lengthLateral offset 70oF / 210C 500oF / 260oC
MFVA-008 Steel 1/2'' x 12'' 0,600'' 1137 886MFVE-008 Stainless 1/2'' x 12'' 0,600'' 1137 886
MFVA-012 Steel 3/4'' x 12'' 0,500'' 910 710MFVE-012 Stainless 3/4'' x 12'' 0,500'' 910 710
MFVA-016 Steel 1'' x 12'' 0,430'' 711 555MFVE-016 Stainless 1'' x 12'' 0,430'' 711 555
MFVA-020 Steel 1-1/4'' x 12'' 0,375'' 568 443MFVE-020 Stainless 1-1/4'' x 12'' 0,375'' 568 443
MFVA-024 Steel 1-1/2'' x 12'' 0,375'' 426 332MFVE-024 Stainless 1-1/2'' x 12'' 0,375'' 426 332
MFVA-032 Steel 2'' x 12'' 0,275'' 398 310MFVE-032 Stainless 2'' x 12'' 0,275'' 398 310
MFVA-040 Steel 2-1/2'' x 12'' 0,200'' 341 266MFVE-040 Stainless 2-1/2'' x 12'' 0,200'' 341 266
MFVA-048 Steel 3'' x 14'' 0,190'' 256 200MFVE-048 Stainless 3'' x 14'' 0,190'' 256 200
MFVA-064 Steel 4'' x 15'' 0,300'' 227 177MFVE-064 Stainless 4'' x 15'' 0,300'' 227 177
MFVA-080 Steel 4'' x 18'' 0,350'' 170 132MFVE-080 Stainless 4'' x 18'' 0,350'' 170 132
MFVA-096 Steel 6'' x 18' 0,295'' 165 129MFVE-096 Stainless 6'' x 18'' 0,295'' 165 129
MFVA-128 Steel 8'' x 18'' 0,265'' 234 182MFVE-128 Stainless 8'' x 18'' 0,265'' 234 182
MFVA-160 Steel 10'' x 24'' 0,480'' 230 179MFVE-160 Stainless 10'' x 24'' 0,480'' 230 179
MFVA-192 Steel 12'' x 24'' 0,400'' 161 126MFVE-192 Stainless 12'' x 24'' 0,400'' 161 126
Standard steel grooved end assemblies, fully compatible with ''Victaulic'' or shurjoint or ''Gruvlok'' type of connectors
GROOVED METAL HOSESSERIES MFVA AND MFVE
6
Standard assemblies with SC40 weld ends
WELDED METAL HOSESSERIES MFWA AND MFWE
Diameter , length , movement and working pressureWorking pressure ''PSI''
ModelWeldends
Diam x
lengthLateral offset 70oF / 210C 500oF / 260oC
MFWA-008 Steel 1/2'' x 12'' 0,600'' 1137 886MFWE-008 Stainless 1/2'' x 12'' 0,600'' 1137 886
MFWA-012 Steel 3/4'' x 12'' 0,500'' 910 710MFWE-012 Stainless 3/4'' x 12'' 0,500'' 910 710
MFWA-016 Steel 1'' x 12'' 0,430'' 711 555MFWE-016 Stainless 1'' x 12'' 0,430'' 711 555
MFWA-020 Steel 1-1/4'' x 12'' 0,375'' 568 443MFWE-020 Stainless1-1/4'' x 12'' 0,375'' 568 443
MFWA-024 Steel 1-1/2'' x 12'' 0,375'' 426 332MFWE-024 Stainless 1-1/2'' x 12'' 0,375'' 426 332
MFWA-032 Steel 2'' x 12'' 0,275'' 398 310MFWE-032 Stainless 2'' x 12'' 0,275'' 398 310
MFWA-040 Steel 2-1/2'' x 12'' 0,200'' 341 266MFWE-040 Stainless 2-1/2'' x 12'' 0,200'' 341 266
MFWA-048 Steel 3'' x 14'' 0,190'' 256 200MFWE-048 Stainless 3'' x 14'' 0,190'' 256 200
MFWA-064 Steel 4'' x 15'' 0,300'' 227 177MFWE-064 Stainless 4'' x 15'' 0,300'' 227 177
MFWA-080 Steel 4'' x 18'' 0,350'' 170 132MFWE-080 Stainless 4'' x 18'' 0,350'' 170 132
MFWA-096 Steel 6'' x 18' 0,295'' 165 129MFWE-096 Stainless 6'' x 18'' 0,295'' 165 129
MFWA-128 Steel 8'' x 18'' 0,265'' 234 182MFWE-128 Stainless 8'' x 18'' 0,265'' 234 182
MFWA-160 Steel 10'' x 24'' 0,480'' 230 179MFWE-160 Stainless 10'' x 24'' 0,480'' 230 179
MFWA-192 Steel 12'' x 24'' 0,400'' 161 126MFWE-192 Stainless 12'' x 24'' 0,400'' 161 126
7
Expansion joints are used to compensate for thermal expansion of rigid heating piping in institutional, commercial and industrial buildings. They can be installed vertically as
well as horizontally.
Compensators or externally pressurized expansion joints can easily replace controlled flexing and slip type expansion joints that are expensive and need high maintenance.
It is very important to properly guide the piping. To get some more information on installation procedures please contact our technical service at 1-800-461-5966
COMPENSATORS
SERIES XPSN, XPSW, XPSV AND XPSF
Available configurations :
-Threaded ends NPT-Grooved ends-Weld ends-Flanged ends
8
Maximum operating pressure
Maximum test pressureMaximum operating temperature
Conform to military specification MIL-E-17813D This compensator is designed for axial movement only. Installation requires alignment, guidance and proper anchorage of the pipe according to standards EJMA.
Model Diameter Fittings type Compression Extension
XPSN-2-075 3/4'' Male NPT 2'' 1/2''XPSN-3-075 3/4'' Male NPT 3'' 1/2''
XPSN-2-100 1'' Male NPT 2'' 1/2''XPSN-3-100 1'' Male NPT 3'' 1/2''
XPSN-2-125 1-1/4'' Male NPT 2'' 1/2''XPSN-3-125 1-1/4'' Male NPT 3'' 1/2''
XPSN-2-150 1-1/2'' Male NPT 2'' 1/2''XPSN-3-150 1-1/2'' Male NPT 3'' 1/2''
XPSN-2-200 2'' Male NPT 2'' 1/2''XPSN-3-200 2'' Male NPT 3'' 1/2''XPSW-2-200 2'' To weld 2'' 1/2''XPSW-3-200 2'' To weld 3'' 1/2''XPSV-2-200 2'' Grooved 2'' 1/2''XPSV-3-200 2'' Grooved 3'' 1/2''XPSF-2-200 2'' Flanged #150 2'' 1/2''XPSF-3-200 2'' Flanged #150 3'' 1/2''
XPSN-2-250 2-1/2'' Male NPT 2'' 1/2''XPSN-3-250 2-1/2'' Male NPT 3'' 1/2''XPSW-2-250 2-1/2'' To weld 2'' 1/2''XPSW-3-250 2-1/2'' To weld 3'' 1/2''XPSV-2-250 2-1/2'' Grooved 2'' 1/2''XPSV-3-250 2-1/2'' Grooved 3'' 1/2''XPSF-2-250 2-1/2'' Flanged #150 2'' 1/2''XPSF-3-250 2-1/2'' Flanged #150 3'' 1/2''
XPSN-2-300 3'' Male NPT 2'' 1/2''XPSN-3-300 3'' Male NPT 3'' 1/2''XPSW-2-300 3'' To weld 2'' 1/2''XPSW-3-300 3'' To weld 3'' 1/2''XPSV-2-300 3'' Grooved 2'' 1/2''XPSV-3-300 3'' Grooved 3'' 1/2''XPSF-2-300 3'' Flanged #150 2'' 1/2''XPSF-3-300 3'' Flanged #150 3'' 1/2''
XPSW-2-400 4'' To weld 2'' 1/2''XPSW-3-400 4'' To weld 3'' 1/2''XPSV-2-400 4'' Grooved 2'' 1/2''XPSV-3-400 4'' Grooved 3'' 1/2''XPSF-2-400 4'' Flanged #150 2'' 1/2''XPSF-3-400 4'' Flanged #150 3'' 1/2''
axial movements
COMPENSATORSSERIES XPSN, XPSW, XPSV AND XPSF
Movible nipple Envelope Bellows Anti torque device Fixed nipple
Rod
Rod
9
Movible nipple Envelope Bellows Anti torque device Fixed nipple
Movible nipple Envelope Bellows Anti torque device Fixed nipple
Movible nipple Envelope Bellows Anti torque device Fixed nipple
Model hose diameter Fittings type
Compression Extension
XPSW-4-100 1'' Weld end 4'' 1/2''XPSV-4-100 1'' Grooved 4'' 1/2''XPSF-4-100 1'' Flanged 4'' 1/2''
XPSW-4-125 1-1/4'' Weld end 4'' 1/2''XPSV-4-125 1-1/4'' Grooved 4'' 1/2''XPSF-4-125 1-1/4'' Flanged 4'' 1/2''
XPSW-4-150 1-1/2'' Weld end 4'' 1/2''XPSV-4-150 1-1/2'' Grooved 4'' 1/2''XPSF-4-150 1-1/2'' Flanged 4'' 1/2''
XPSW-4-200 2'' Weld end 4'' 1/2''XPSV-4-200 2'' Grooved 4'' 1/2''XPSF-4-200 2'' Flanged 4'' 1/2''
XPSW-4-250 2-1/2'' Weld end 4'' 1/2''XPSV-4-250 2-1/2'' Grooved 4'' 1/2''XPSF-4-250 2-1/2'' Flanged 4'' 1/2''
XPSW-4-300 3'' Weld end 4'' 1/2''XPSV-4-300 3'' Grooved 4'' 1/2''XPSF-4-300 3'' Flanged 4'' 1/2''
XPSW-4-400 4'' Weld end 4'' 1/2''XPSV-4-400 4'' Grooved 4'' 1/2''XPSF-4-400 4'' Flanged 4'' 1/2''
XPSW-4-500 5'' Weld end 4'' 1/2''XPSV-4-500 5'' Grooved 4'' 1/2''XPSF-4-500 5'' Flanged 4'' 1/2''
XPSW-4-600 6'' Weld end 4'' 1/2''XPSV-4-600 6'' Grooved 4'' 1/2''XPSF-4-600 6'' Flanged 4'' 1/2''
XPSW-4-800 8'' Weld end 4'' 1/2''XPSV-4-800 8'' Grooved 4'' 1/2''XPSF-4-800 8'' Flanged 4'' 1/2''
XPSW-4-1000 10'' Weld end 4'' 1/2''XPSV-4-1000 10'' Grooved 4'' 1/2''XPSF-4-1000 10'' Flanged 4'' 1/2''
XPSW-4-1200 12'' Weld end 4'' 1/2''XPSV-4-1200 12'' Grooved 4'' 1/2''XPSF-4-1200 12'' Flanged 4'' 1/2''
Axial movements
For more information, please contact our representatives at
514-327-5966.
GREATER MOVEMENT COMPENSATORSSERIES XPSW, XPSV AND XPSF
Eyebolt Movible nipple Envelope Bellows
Anti torque device fixed nipple
Drain
Anti torque device fixed nipple
Drain
11
Rod
Eyebolt Anti torque device fixed nipple Movible nipple Envelope Bellows
Conform to military specification MIL-E-17813D This compensator is designed for axial movement only. Installation requires alignment, guidance and proper anchorage of the pipe according to standards EJMA.
Drain
With a similar construction of our 2'' and 3'' compression models, those can take 4'', 6'' and 8'' of axial compression. They can also be doubled with an anchor base to take as much as 8'',12'' and even 16'' of axial compression. Fabricated with flushing drains and leverage brackets to facilitate installation. They are available in 150# and 300# design pressure.
Eyebolt Movible nipple Envelope Bellows
Rod
Rod
SERIES HSEE AND HDEE
Profits of use :Rubber joints are ideal for insulation and noise reduction. They prevent component breakdown with their
great adsorption capacity in compression, extension and angular movements.
Fonctions : -Pumps and air compressors-Cooling and blowers-Warer supply and drainage-Marine piping installation-Power and chemical plants
Hebdraulique carries 3 series in EPDM, stocked from 1 1/2 '' to 18'' diameter ready to be shipped on a day to day basis. We also have access on request to many other synthetic rubbers like ''Butyl'', ''Neoprene'', ''PTFE'', ''Nitril''
and many others. EPDM is the most commonly used on the market.
For more information, please contact our technical department at 514-327-5966.
RUBBER JOINTS
12
SINGLE AND DOUBLE SPHERE RUBBER EXPANSION JOINTS
Single sphere rubber flanged expansion joints
Double sphere rubber flanged expansion joints
Materials
Part Part description Material1
234
56
FlangesReinforcement fabric Nylon
Carbon steel - plated
Reinforcing wire Mild steelTube Synthetic rubberCover Synthetic rubber
Root ring Carbon steel
Neoprene, EPDM, butyl, nitril and many others are also avalaible
Part # Size Face to facedimension
Compression Elongation Lateral Angular Pressure Burst pres.Temperature VaccumHSEE-024 1-1/2'' 6'' 1/2'' 3/8'' 1/2'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-024 1-1/2'' 7'' 1'' 3/4'' 1'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-032 2'' 6'' 1/2'' 3/8'' 1/2'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-032 2'' 7'' 1'' 3/4'' 1'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-040 2-1/2'' 6'' 1/2'' 3/8'' 1/2'' 15O 225 psi 900 psi 225 F 26'' HgHSEE-040 2-1/2'' 7'' 1'' 3/4'' 1'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-048 3'' 6'' 5/8'' 3/8'' 1/2'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-048 3'' 7'' 1'' 3/4'' 1'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-064 4'' 6'' 5/8'' 3/8'' 1/2'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-064 4'' 9'' 1-3/8'' 1'' 1-1/4'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-080 5'' 6'' 5/8'' 3/8'' 1/2'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-080 5'' 9'' 1-3/8'' 1'' 1-1/4'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-096 6'' 6'' 5/8'' 3/8'' 1/2'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-096 6'' 9'' 1-3/8'' 1'' 1-1/4'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-128 8'' 6'' 5/8'' 3/8'' 1/2'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-128 8'' 13'' 1-3/4'' 1'' 1-1/2'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-160 10'' 8'' 3/4'' 1/2'' 3/4'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-160 10'' 13'' 1-3/4'' 1'' 1-1/2'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-192 12'' 8'' 3/4'' 1/2'' 3/4'' 15O 225 psi 900 psi 225 F 26'' HgHDEE-192 12'' 13'' 1-3/4'' 1'' 1-1/2'' 30O 150 psi 600 psi 225 F 26'' Hg
HSEE-224 14'' 8'' 3/4'' 1/2'' 3/4'' 15O 150 psi 600 psi 225 F 26'' HgHDEE-224 14'' 13-3/4'' 1-3/4'' 1-1/4'' 1-1/2'' 20O 150 psi 600 psi 225 F 26'' Hg
HSEE-256 16'' 8'' 3/4'' 1/2'' 3/4'' 15O 125 psi 500 psi 225 F 26'' HgHDEE-256 16'' 13-3/4'' 1-3/4'' 1-1/4'' 1-1/2'' 20O 150 psi 600 psi 225 F 26'' Hg
HSEE-288 18'' 8'' 3/4'' 1/2'' 3/4'' 15O 125 psi 500 psi 225 F 26'' Hg
Allowable motion ratings Operating conditions
HDEE-288 18'' 13-3/4'' 1-3/4'' 1-1/4'' 1-1/2'' 20O 150 psi 600 psi 225 F 26'' Hg
HSEE-320 20'' 8'' 3/4'' 1/2'' 3/4'' 15O 125 psi 500 psi 225 F 26'' HgHDEE-320 20'' 13-3/4'' 1-3/4'' 1-1/4'' 1-1/2'' 20O 150 psi 600 psi 225 F 26'' Hg
HSEE-384 24'' 10'' 3/4'' 1/2'' 3/4'' 15O 125 psi 500 psi 225 F 26'' HgHDEE-384 24'' 13-3/4'' 1-3/4'' 1-1/4'' 1-1/2'' 20O 150 psi 600 psi 225 F 26'' Hg
RUBBER JOINTSHSEE AND HDEE SERIES
13
1) - On heated transfer lines for products like sulfur that as to bemaintained at a high temperature to keep flow going.
- Steam or thermal oil flows in a double envelope that heats theproduct in the main hose.
2) - The same principle is frequently used in asphalt production industry.Butimen product flow in the inner hose and is heated by the thermal
oil in the outside hose. This way the product stays hot and flows better.
3) - On cryogenic transfer lines- Maintaining a vacuum in the envelope effectively insulates cryogenic
liquids being carried in the main pipe.
1) - The traced assembly will be used when the product inside the hosehas to be heated to flow easily. Steam or thermal oil heats the inner
traced hose that heats the product going through the bigger hose so it maintains a high flow.
SPECIALIZED HOSES
Through its workshop, Hebdraulique offers customized assemblies for specialized applications
Jacketed assemblies
Traced assemblies
14
1)- Hoses with inner liners are often used when the velocity is high. The liner will reduce vibration and noise by creating a smooth wall inside the hose.
1) - For applications were the braid could easily be damaged by frequentmovement or an abrasive environment or simply to reduce the bend
radius.
SPECIALIZED HOSES
With inner liner
Outside protection
15
FLEXIBLE LOOPS
There are practically no limits in possible configurations. We can install an inner liner, double the braid or even make a jacketed loop.
An economical and simple solution
For piping that moves gas, steam, water or chemical product or for seismic movements.
The ''U'' shape hoses are always an excellent solution for thermal expansion of piping. It creates less stress on anchors and installations. They will effectively follow installation's
thermal movements in all directions.
''U'' shaped assemblies or flexible loops
16
Axial movements
Model Hosediameter
Alloy ends Fittings typeSeismic in all
directionsUFSN-2-008 1/2'' Steel Threaded NPT 2''
UFSNS-2-008 1/2'' Stainless Threaded NPT 2''UFCC-2-008 1/2'' Copper To weld 2''
UFSN-2-012 3/4'' Steel Threaded NPT 2''UFSNS-2-012 3/4'' Stainless Threaded NPT 2''UFCC-2-012 3/4'' Copper To weld 2''
UFSN-2-016 1'' Steel Threaded NPT 2''UFSNS-2-016 1'' Stainless Threaded NPT 2''UFCC-2-016 1'' Copper To weld 2''
UFSN-2-020 1-1/4'' Steel Threaded NPT 2''UFSNS-2-020 1-1/4'' Stainless Threaded NPT 2''UFCC-2-020 1-1/4'' Copper To weld 2''
UFSN-2-024 1-1/2'' Steel Threaded NPT 2''UFSNS-2-024 1-1/2'' Stainless Threaded NPT 2''UFCC-2-024 1-1/2'' Copper To weld 2''
UFSN-2-032 2'' Steel Threaded NPT 2''UFSNS-2-032 2'' Stainless Threaded NPT 2''UFCC-2-032 2'' Copper To weld 2''
UFSN-2-040 2-1/2'' Steel Threaded NPT 2''UFSNS-2-040 2-1/2'' Stainless Threaded NPT 2''UFCC-2-040 2-1/2'' Copper To weld 2''
UFCC-2-048 3'' Copper To weld 2''UFCC-2-064 4'' Copper To weld 2''
UFSN-4-008 1/2'' Steel Threaded NPT 4''UFSNS-4-008 1/2'' Stainless Threaded NPT 4''UFCC-4-008 1/2'' Copper To weld 4''
UFSN-4-012 3/4'' Steel Threaded NPT 4''UFSNS-4-012 3/4'' Stainless Threaded NPT 4''UFCC-4-012 3/4'' Copper To weld 4''
UFSN-4-016 1'' Steel Threaded NPT 4''UFSNS-4-016 1'' Stainless Threaded NPT 4''UFCC-4-016 1'' Copper To weld 4''
UFSN-4-020 1-1/4'' Steel Threaded NPT 4''UFSNS-4-020 1-1/4'' Stainless Threaded NPT 4''UFCC-4-020 1-1/4'' Copper To weld 4''
UFSN-2-024 1-1/2'' Steel Threaded NPT 4''UFSNS-2-024 1-1/2'' Stainless Threaded NPT 4''UFCC-2-024 1-1/2'' Copper To weld 4''
UFSN-4-032 2'' Steel Threaded NPT 4''UFSNS-4-032 2'' Stainless Threaded NPT 4''UFCC-4-032 2'' Copper To weld 4''
UFSN-4-040 2-1/2'' Steel Threaded NPT 4''UFSNS-4-040 2-1/2'' Stainless Threaded NPT 4''UFCC-4-040 2-1/2'' Copper To weld 4''
UFCC-4-048 3'' Copper To weld 4''UFCC-4-064 4'' Copper To weld 4''
UFSF-4-032 2'' Steel Flanged #150 4''UFSF-4-040 2-1/2'' Steel Flanged #150 4''UFSF-4-048 3'' Steel Flanged #150 4''UFSF-4-064 4'' Steel Flanged #150 4''UFSF-4-096 6'' Steel Flanged #150 4''
Flexible loops
UFSF-4-128 8'' Steel Flanged #150 4''
FLEXIBLE LOOPS
17
BELLOWS
Manufactured from 2'' to 24'' depending on your application and your requirements. Made in Canada. Technical drawings and specifications
available on request.18
BELLOWS
APPLICATIONS :
- Generators- Marine propulsion
- Power units- Bellow type pump
connectors with control unit- OEM
Construction 2, 3 or up to 5-ply Certification ABS
Connectors bellows pumps with tie rods and spacers
Fabricated to compensate for axial, lateral and angular motions.
They are installed on suction pressure lines. Also often installed pumps, compressors or any other systems connected to rigid piping.
Because the bellow is made of stainless steel it is not subject to
high temperature or UV rays deterioration like rubber joints.
Other types and configurations are avalaible, contact us !
19
ALIGNMENT STANDARD GUIDESPipe guides are available for large diameters to different movement and
insulation thickness.
20
Piece Description HGA-012-4100 Steel guide 3/4" X 1" ISO. 4" MOV.
HGA-012-4150 Steel guide 3/4" X 1-1/2" ISO. 4" MOV.
HGA-016-4150 Steel guide 1" X 1-1/2" ISO. 4" MOV.
HGA-016-4200 Steel guide 1" X 2" ISO. 4" MOV.
HGA-020-4100 Steel guide 1-1/4" X 1" ISO. 4" MOV.
HGA-020-4150 Steel guide 1-1/4" X 1-1/2" ISO. 4" MOV.
HGA-020-4250 Steel guide 1-1/4" X 2-1/2" ISO. 4" MOV.
HGA-024-4100/150 Steel guide 1-1/2" X 1" À 1-1/2 ISO. 4" MOV.
HGA-024-4200 Steel guide 1-1/2" X 2" ISO. 4" MOV.
HGA-024-4250/300 Steel guide 1-1/2" X 2-1/2" À 3'' ISO. 4" MOV.
HGA-032-4100 Steel guide 2" X 1" ISO. 4" MOV.
HGA-032-4150 Steel guide 2" X 1-1/2" ISO. 4" MOV.
HGA-032-4200/250 Steel guide 2" X 2" À 2-1/2 ISO. 4" MOV.
HGA-040-4100/150 Steel guide 2-1/2" X 1-1/2" ISO. 4" MOV.
HGA-040-4200/250 Steel guide 2-1/2" X 2" ISO. 4" MOV.
HGA-048-4150/200 Steel guide 3" X 1-1/2" ISO. 4" MOV.
HGA-048-4250/300 Steel guide 3" X 2-1/2 " ISO. 4" MOV.
HGA-048-4400 Steel guide 3" X 4" ISO. 4" MOV.
HGA-064-4100/150 Steel guide 4" X 1" À 1-1/2 ISO. 4" MOV.
HGA-064-4200/250 Steel guide 4" X 2" À 2-1/2 ISO. 4" MOV.
HGA-064-4300/350 Steel guide 4" X 3" À 3-1/2'' ISO. 4" MOV.
HGA-064-6400 Steel guide 4" X 3" ISO. 6" MOV.
HGA-080-4100/200 Steel guide 5" X 1'' À 2" ISO. 4" MOV.
HGA-080-6400 Steel guide 5" X 4" ISO. 6" MOV.
HGA-096-4100/150 Steel guide 6" X 1'' À 1-1/2" ISO. 4" MOV.
HGA-096-4200/250 Steel guide 6" X 2" À2-1/2 ISO. 4" MOV.
HGA-096-6250/300 Steel guide 6" X 2-1/2 À 3" ISO. 6" MOV.
HGA-096-6400 Steel guide 6" X 4" ISO. 6" MOV.
HGA-128-4100/150 Steel guide 8" X 1'' À 1-1/2" ISO. 4" MOV.
HGA-160-6100/200 Steel guide 10" X 1'' À 2" ISO. 6" MOV.
HGA-160-6250/300 Steel guide 10" X 2-1/2 À 3" ISO. 6" MOV.
HGA-160-6350/400 Steel guide 10" X 3-1/2 À 4'' " ISO. 6" MOV.
HGA-192-6100/200 Steel guide 12" X 1'' À 2" ISO. 6" MOV.
Hosediameter
50 PSI
100 PSI
150 PSI
300 PSI
1'' 4'' 14'' 21 15 12 10
1-1/4'' 5'' 17'' 23 17 13 12
1-1/2'' 6'' 21'' 28 20 17 13
2'' 8'' 28'' 32 23 18 15
2-1/2'' 10'' 35'' 35 28 22 20
3'' 12'' 42'' 38 28 23 17
3-1/2'' 14'' 49'' 45 35 27 19
4'' 16'' 56'' 52 38 31 22
5'' 20'' 68'' 63 45 38 25
6'' 24'' 84'' 68 48 40 28
8'' 32'' 112'' 87 62 45 38
10'' 40'' 11' 8'' 107 75 60 48
12'' 4' 14' 118 85 70 50
14'' 4' 8'' 16' 4'' 122 88 72 55
16'' 5' 4'' 18' 8'' 137 96 80 60
18'' 6' 21' 145 125 85 65
20'' 6' 8'' 23' 4'' 160 118 90 70
24'' 8' 28' 181 125 105 75
Installation guides pipe
without guide
with guides
The first two guides must be installed to 4 times the diameter of
the piping
The latest guides must be installed to 14 times the
diameter of the pipeThe drawing is not to scale
Maximum distance from the joint to the first guide or anchor
Maximum distance between the first
and second guide
Approximate distance between the next guides
S.T.A.M.P.E.D.
S- Size
T- Temperature
- How is the hose assembly actually being used? Is it apressure application? Is it a vaccum application? Is it agravity flow application? Are there any specialrequirements that the hose assembly is expected toperform? Is the hose being used in a horizontal or verticalposition? Are there any pulsations or vibrations acting onthe hose asssembly?
A- Application
M- Media
- What is the maximum pressure including surges(or, maximum vacuum) that hose assembly willbe subjected to? Always rate the maximum workingpressure of your hose assembly by the lowest ratedelement.
P- Pressure
- What couplings have been requested by the user? Arethey the proper fittings for the application and hoseselected?
E- Ends
- What is the tempoerature range of the media (product)that is flowing through the hose assembly? What is thetemperature range of the environment that surrounds theoutside of the hose assembly
QUESTIONS TO ASK
- What is the media/material that is flowing through thehose assembly? Being specific is critical. Check for:abrasive materials, chemical compatibility, etc.
- What is the inside diameter of the hose? What is theoutside diameter of both ends of the hose. What is theoverall length of the assembly required?
21
D- Delivery
CLASSIFICATION OF MOTION
22
Angular motion Minimum bend radius offset positionConstant radius traveling
loop - class A
Vertical lens - class A Variable radius traveling loop - class B
Vertical lens - class B
Practicle advice
Avoid torque Avoid operating on 2 axes
Avoid over bending Avoid compressing the hose
Avoid sharp bends Provide support
Do not extend or compress axially Don't twist the hose
Nomenclature
= Centerline
π = 3.1416
R = Minimum centerline bend radius for constant flexing (inches)
= Angular deflection (degrees)
T = Offset motion to one side of centerline (inches)
K-K1 = Hang length of the loop (inches)
K2 = Hang length of the loop (inches)
L = Live hose length (inches)
Lp = Projected live hose length (inches)
INSTALLATION OF HOSE IN STAINLESS STEEL
23
Here are some recommendations to ensure better performance of metallic hoses
** Do not compress the hose connector, because it has a residual voltage on braiding and internal waves. One
should not stretch the hose connector, because it also has a residual voltage on the braid and internal waves. Before ordering, it is important to take the exact measurement of
the space to fill. It is best to change the line or order a new flexible rather than compress or stretch.
** Never apply a twisting connector. The metal connector is not designed to be manipulated in any direction. A wrench or a pipe wrench should not be used on braiding or collars. Tools must be handled
in order to avoid having to twist the connector.
** Do not bend the hose suddenly near welds. It is preferable that your connector has bends or redo your line accordingly. Always follow the radius of
curvature.
** A flexible connector must not support anything other than its own weight. If there is an additional weight to bear,
it is preferable to install brackets on the pipe. These brackets must be installed before the connectors.
Piping shall be anchored near the flexible connector. The hose should not
compensate for the movements of compression or expansion of the pipe. For more information, please contact
our technical service 514 - 327-5966
IDENTIFYING FITTINGS
24
Neck Flanges#150/300 and othersCarbon steel and stainless steel 304 and 316 Working pressure from 275 psi
Slip on flanges#150/300 and othersCarbon steel and stainless steel 304 and 316 Working pressure from 275 psi
Swivel flanges#150/300 and othersCarbon steel and stainless steel 304 and 316 Working pressure from 275 psi
NPT malesAvailable in carbon steel and stainless steel 304 and 316Schedule 40 et 80Working pressure 2 400 psi and up
NPT hex malesAvailable in steel, stainless steel and copperWorking pressure up to 3 000 psi
NPT female unionsAvailable in steel, stainless steel and copperFrom 150 psi to 3 000 psi
Plate flanges #150/300 drilling or metric dimensions
Swivel NPT femalesWith 30 ° seatAvailable in zinc, plated steel and 316 stainless steel Working pressure up to 6 000 psi
37° JIC FemalesAvailable in zinc, plated steel and 316 stainless steel Working pressure up to 5 000 psi
37° JIC malesAvailable in zinc, plated steel and 316 stainless steel Working pressure up to 5 000 psi
Weld endsAvailable in steel and stainless steel 304 et 316 Schdule 40 and 80Copper available
Grooved endsAvailable in steel and stainless steel
Also available:ORFS from 1/4 to 1 1/2 '' ERMETO from 1/8 to 2''ORB from 1/8 to 2 ''45 DEG FLARE from 1/8 to 3/4'' INVERTED FLARE from 1/8 to 1'' BSP from 1/8 to 2''METRIC from 4 to 38 mm JAPONESE ''JIS'' from 1/8 to 2'' KOMATSU from 3/8 to 1 1/2'' FLANGE C61 from 1/2 to 4'' FLANGE C62 from 1/2 to 2''
Hebdraulique has its own fabrication shop including CNC and milling for
all specific requests
TEMPERATURE ADJUSTMENT FACTORS
Temperature (°F)
304/304L 316 L 321 Carbon steel Monel Bronze
70 1.00 1.00 1.00 1.00 1.00 1.00 150 0.95 0.93 0.97 0.99 0.93 0.92 200 0.91 0.89 0.94 0.97 0.90 0.89250 0.88 0.86 0.92 0.96 0.87 0.86 300 0.85 0.83 0.88 0.93 0.83 0.83 350 0.81 0.81 0.86 0.91 0.82 0.81400 0.78 0.78 0.83 0.87 0.79 0.78 450 0.77 0.78 0.81 0.86 0.77 0.75 500 0.77 0.77 0.78 0.81 0.73 ---600 0.76 0.76 0.77 0.74 0.72 ---700 0.74 0.76 0.76 0.66 0.71 ---800 0.73 0.75 0.68 0.52 0.70 ---900 0.68 0.74 0.62 ---- ---- ---
1 000 0.60 0.73 0.60 ---- ---- ---1 100 0.58 0.67 0.58 ---- ---- ---1 200 0.53 0.61 0.53 ---- ---- ---1 300 0.44 0.55 0.46 ---- ---- ---1 400 0.35 0.48 0.42 ---- ---- ---1 500 0.26 0.39 0.37 ---- ---- ---
Temperature adjustment factor based on braid alloy
Temp (˚F) PSI Temp (˚F) PSI Temp (˚F)
0 212 150 366 450 460
10 238 175 377 475 465
20 259 200 388 500 470
30 274 225 397 550 480
40 287 250 406 600 489
50 298 275 414 700 505
60 307 300 422 800 520
75 320 325 429 900 534
80 324 350 436 1 000 546
90 331 375 442 1 250 574
100 338 400 448 1 500 606
125 353 425 454 2 500 669
PSI HG Temp (˚F)
---- 0
29.84 20
29.74 32
29.67 40
29.39 60
28.89 80
27.99 100
26.48 120
24.04 140
20.27 160
15.20 180
6.46 200
In general, the strength and therefore the pressure rating of metal hose decreases as the temperature increases. Thus, as the operating temperature of a metal hose assembly increases,
the maximum allowable working pressure of the assembly decreases. The pressure ratings shown in the specifications charts for corrugated and interlocked hose are valid at 70°F.
Elevated service temperatures will decrease these pressure ratings by the factors shown in the following chart for the alloy used in the braid wire. What also must be considered is the
maximum working temperature of the end fittings, of the hose and their method of attachment.
For example: to calculate the maximum working pressure for: -1'' ID, 321 (Ex: MFSNS-016)-with single-braided, 304L stainless steel-at 800 °F
We must use the working pression 70°F , 711 PSI of the assembly and multiply by 0,73. The maximum working pressure at 800°F is 519 PSI.
Stainless steel Stainless steel Stainless steel
BRANCHES
1
800
461
5966
ST-LÉONARD8410 Champ-d'Eau Montréal, H1P 1Y3
514-327-5966 Email: [email protected]
ALMA905 Avenue Bombardier
Alma, G8B 6H2 418-662-6436
Email: [email protected]
CHICOUTIMI 233 Clément Gilbert
Chicoutimi, G7H 5B1 418-698-4224
Email: [email protected]
LAVAL3105 Boul. Industriel
Laval, H7L 4P8 450-669-6888
EMaill: [email protected]
POINTE-CLAIRE 823 A Tecumseh
Pointe-Claire, H9R 4X8 514-684-7717
Email: [email protected]
BOUCHERVILLE 75 ch du Tremblay #8 Boucherville. J4B 7L6
450-641-9229 Email: [email protected]
MIRABEL16 949 Curé Labelle #3
Mirabel, J7J 2G7 450-431-2287
Email: [email protected]
QUÉBEC2526 Watt
Québec, G1P 3T4 418-688-0433
Email: [email protected]
TROIS-RIVIÈRES 2774 Sidbec Nord
Trois-Rivières, G8Z 4E1 819-691-2700
Email: [email protected]
TERREBONNE3497 Boul. des Entreprises
Terrebonne, J6X 4J9 450-477-0429
Email: [email protected]
www.hebdraulique.ca
BROSSARD9500 Place Jade
Brossard, J4Y 3C1450-444-8882
Email: [email protected]
PAGE FRONTISPICE CARTONNÉE EDITION 16 ANGPAGE INTERNE CARTONNÉE EDITION 16 ANGPAGE 1 EDITION 16 ANGPAGE 2 EDITION 16 ANGPAGE 3 EDITION 16 ANGPAGE 4 EDITION 16 ANGPAGE 5 EDITION 16 ANGPAGE 6 EDITION 16 ANGFeuil1
PAGE 7 EDITION 16 ANGFeuil1
PAGE 8 EDITION 16 ANGPAGE 9 EDITION 16 ANGPAGE 10 EDITION 16 ANGPAGE 11 EDITION 16 ANGPAGE 12 EDITION 16 ANGPAGE 13 EDITION 16 ANGPAGE 14 EDITION 16 ANGPAGE 15 EDITION 16 ANGPAGE 16 EDITION 16 ANGPAGE 17 EDITION 16 ANGPage vierge
PAGE 18 EDITION 16 ANGPAGE 19 EDITION 16 ANGPAGE 20 EDITION 16 ANGPAGE 21 EDITION 16 ANGPAGE 22 EDITION 16 ANGPAGE 23 EDITION 16 ANGPAGE 24 EDITION 16 ANGPAGE FIN INTERNE CARTONNÉE EDITION 16 ANGPAGE CARTONNÉ EXT FIN EDITION 16 ANGPage vierge