metal DeteCtor - Bunting · 2021. 2. 22. · the metal detector is to be positioned in the center of the metal free zone. the values are for reference purposes and should, if possible,

www.mesutronic.de

METALLDETEKTOR

Sichere Erkennung aller Metallarten:

Eisen

Edelstahl

Aluminium

Kupfer

Messing

.......

Egal, ob dieTeile lose vorkommen oderob es sich um Metalleinschlüsse handelt.

61/30noisreV

Multisegment-Metalldetektor (Meldebalken) zur Un-tersuchung von Warenbahnen (Woven- and Non-Wovenprodukte).

Anwender Anwendung

TextilindustrieKunstst rie

WarenausgangskontrolleMaschinenschutz, z .B.:KalanderanlagenScher- / GewebeputzmaschinenMuldenpressen

METRON 04 Pr

Vers

ion 08

/19

MULTISEGMENTED METAL DETECTOR FOR THEINSPECTION OF WEBS (WOVEN AND NON-WOVENS)

• TexTileindusTry

• plasTicsandrubberindusTry

• producTinspecTion

• MachineryproTecTion:calendersfabricshredding/fabriccleaningMachinesforMpresses

ApplicAtionindustries

metal DeteCtorMETRON 04 ProfiLine

reliABle detection oF All MetAls:• Ferrous• stAinless steel• AluMinuM• copper• BrAss

reliABle detection oF Free orencApsulAted contAMinAnts.

METRON 04 ProfiLineMETRON 04 ProfiLine

FEATURES

MINIMAL “METAL FREE ZONE” REQUIRED FOR INSTALLATION.

SPECIAL COIL CONFIGURATIONS MAKE THE SYSTEM IMPERVIOUS TO VIBRATIONS OR

EXTERNAL EFFECTS.

ANTI-STATIC SENSOR SURFACE.

EASY TO OPERATE.

SELFMONITORING ELECTRONICS.

EXCELLENT SENSITIVITY TO FERROUS, NON-FERROUS AND STAINLESS STEEL.

DESIGNED FOR INDUSTRIAL USE.

THE DATA SHEET CONTAINS ADDITIONAL INFORMATION AS TO THE AMD 04

(VERSION 4.1) ELECTRONICS.

X

METAL DETECTOR METRON 05 ProfiLine IN USE.

METAL SIGNAL BAR

X

METRON 04 ProfiLine

stAndArd scope oF delivery• deTecTioncoil

• elecTronicsinhousing

• connecTingcables

• userManualincl.insTallaTioninsTrucTions,wiringdiagraMandspareparTslisTinseverallanguages

• eu-conforMiTydeclaraTion

options

speciAl versions• highTeMperaTureversion(producTTeMperaTure≤120°c)

• highspeedversionforconveyingspeedsupTo20M/s

• uniTspainTedincusToMerspecificcolorcode

• neuTralversionforoeMcusToMers

• specialpowersupply

• warningdevice - beacon

- buzzer

- beaconwiThsiren

• MeTaldeTecTor-TesTspheres - aMeTalsphereeMbeddedincrediTcardsizeplasTicTo

confirMproperfuncTioning.severalsizesandTypes

(ifdesiredwiThcerTificaTe)

• reMoTereseTbuTTon


FEATURES

MINIMAL “METAL FREE ZONE” REQUIRED FOR INSTALLATION.

SPECIAL COIL CONFIGURATIONS MAKE THE SYSTEM IMPERVIOUS TO VIBRATIONS OR

EXTERNAL EFFECTS.

ANTI-STATIC SENSOR SURFACE.

EASY TO OPERATE.

SELFMONITORING ELECTRONICS.

EXCELLENT SENSITIVITY TO FERROUS, NON-FERROUS AND STAINLESS STEEL.

DESIGNED FOR INDUSTRIAL USE.

THE DATA SHEET CONTAINS ADDITIONAL INFORMATION AS TO THE AMD 04

(VERSION 4.1) ELECTRONICS.

X

METAL DETECTOR METRON 05 ProfiLine IN USE.

METAL SIGNAL BAR

X

METRON 04 ProfiLine

METRO

N 04

Pro�LineM

ETRON

04 ProfiLine

LED

Kabeleinführungcable inlet

LED

Segmentlänge 300 mm

Einbaubeispielexample of installation

Option:Montageschellemounting clamp

Alle Maße in mmall dimensions in mm

Der Metalldetektor ist innerhalb der "Metallfreien Zone" mittig zu positionierenDie errechneten Werte dienen als Orientierungshilfe (Minimalwerte, die gerne überschritten werden dürfen!) und sind durch uns projetkbezogen zu bestätigen.Für bewegte Metallteile ist die "Metallfreie Zone" zu erweitern, und von uns ebenfalls projektbezogen zu bestätigen!THE METAL DETECTOR IS TO BE POSITIONED IN THE CENTER OF THE METAL FREE ZONE. THE VALUES ARE FOR REFERENCE PURPOSES AND SHOULD, IF POSSIBLE, BE INCREASED TO ENSURE OPTIMUM PERFORMANCE. FOR MOVING METAL THE METAL FREE ZONE IS TO BE INCREASED AND TO BE CONFIRMED BY A REPRESENTATIVE.

Montageschelle / mounting clampAusführung 1 / design 1V≤ 1,5m/s (90m/min) Art.-Nr.: 350133Ausführung 2 / design 2V> 1,5m/s (90m/min) Art.-Nr.: 350132

150

350

500

115

55

190

45 14151

31

effektive Tastbreite Aeffective sensing width A

65120

200150 150

120

350

30

500

B (= A + 160) 150150

300

30 30

40O

↔ ↔

654321

1 2 3 4 5 6

Segmente B A3 1060 9004 1360 12005 1660 15006 1960 18007 2260 21008 2560 24009 2860 270010 3160 300011 3460 330012 3760 360013 4060 390014 4360 420015 4660 450016 4960 480017 5260 510018 5560 540019 5860 570020 6160 600021 6460 630022 6760 660023 7060 690024 7360 720025 7660 750026 7960 780027 8260 810028 8560 840029 8860 870030 9160 900031 9460 930032 9760 960033 10060 990034 10360 1020035 10660 1050036 10960 1080037 11260 1110038 11560 1140039 11860 1170040 12160 12000

Metallfreie Zone fürnicht bewegte Metallemetal free area fornon moving metals

DIMENSIONSALL DIMENSIONS IN MM

METRON 04 ProfiLine

s=12

Befestigungspunkt Ø12MOUNTING POINT Ø12

ZusatzbefestigungADDITIONAL SUPPORTS

von 11 bis 19 Segmentefrom 11 to 19 Segments

ab 20 Segmente20 or more Segments

Montageschelle @mountig clamp

Montageschelle @mountig clamp

02

256200

B / 2 B / 2B = 3460 - 5860150 150

C1 (C2) C1B = 6160 - 12160150 150

57,5

(62,

5)

55(6

5)

Ø 15Ø 32

M 12

M 12

EQUIPMENT 3 - SUSPENSION ITEM.-NO 350679

EQUIPMENT 1 - RETAINING YOKEITEM.-NO 350418

EQUIPMENT 2 - SUSPENSION ITEM.-NO 350419

256

60 -

170

(62,

5)

50O

30 10M

(200)

180

- 290

60

300

ca. 2

20ca. 620 - 700


METRON 04 ProfiLine


MOUNTING BRACKETS VERSION 1

MOUNTING VERSION 2BRACKETS

(LOW SPEED, V = < 90 M/MIN.)

(HIGH SPEED, V = > 90 M/MIN.)

151

17

190

45

115

40

1455

110

151

17

190

45

115

40

1455

110

MOUNTING BRACkETS ProfiLine “sloW“(LOW SPEED, V = < 90 M/MIN.)

MOUNTING BRACkETS ProfiLine “fAst“(HIGH SPEED, V = > 90 M/MIN.)


DIM

EN

SIO

NS

ELE

CTR

ON

ICB

OX

(DR

ILLI

NG

PATT

ER

N)

ALL

DIM

EN

SIO

NS

INM

M.

LED

OP

TIO

NA

L:M

OU

NTI

NG

BR

AC

KE

TS

WIR

ING

INP

UT

SE

GM

EN

TS

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

B10

6013

6016

6019

6022

6025

6028

6031

6034

6037

6040

6043

6046

6049

6052

6055

6058

6061

6064

6067

6070

6073

6076

6079

6082

6085

6088

6091

6094

6097

6010

060

1036

010

660

1096

011

260

1156

011

860

1216

0

A 900

1200

1500

1800

2100

2400

2700

3000

3300

3600

3900

4200

4500

4800

5100

5400

5700

6000

6300

6600

6900

7200

7500

7800

8100

8400

8700

9000

9300

9600

9900

1020

010

500

1080

011

100

1140

011

700

1200

0

LED

43

21

554

32

1

INS

TALL

ATIO

NE

XA

MP

LE

B(=

A+1

60)

150

150

40

120

200

SE

NS

ING

AR

EA

A

300

65

120


ME

TR

ON

04

Pro

fiLin

e

METAL FREE ZONE (MFZ)

30 30

ALL DIMENSIONS IN MM.

METAL FREE ZONE FORNON MOVING METAL PARTS

INSTALLATION EXAMPLE

POSITION THE DETECTOR APERTURE IN THE MIDDLE OF THE „METAL FREE ZONE“.THE STATED VALUES ARE TO BE TAKEN AS ORIENTATION VALUES (MINIMUM VALUES WHICH SHOULD BE EXCEEDED)AND HAVE TO BE VERIFIED BY THE MANUFACTURER, DEPENDING ON THE PROJECT.

THE METAL FREE ZONE NEEDS TO BE EXTENDED IN CASE OF MOVING METAL PARTS, AND NEED TO BE VERIFIED BY US FOR THE SPECIFIC PROJECT!

120

200

30

150 150

(500)

350

METRO

N 04 ProfiLine

SENSITIVITY DIAGRAM

THE SENSITIVITY IS DEPENDENT UPON THE DISTANCE BETWEEN THE METAL CONTAMINANT AND THE SENSING SURFACE.

THE CLOSER THE METAL IS TO THE SURFACE, THE GREATER THE SENSITIVITY.

TYPICAL SENSITIVITY CURVE FOR A 2,600 MMWIDE DETECTION COIL.

THE SENSITIVITIES STATED IN THE DIAGRAM HAVE BEEN ACHIEVED UNDER PRODUCTION

CONDITIONS AND ARE INDICATIVE WITH NORMAL FABRICS. THE MATERIAL WAS

CONTAMINATEDWITH NEEDLETIPS OFVARYING LENGTH FORTEST PURPOSES.

DIFFERING RESULTS THAN SHOWN IN THE DIAGRAM ARE POSSIBLE DUE TO THE RELATIVE

POSITION“ORIENTATION EFFECT“ OFTHE NEEDLESTOTHE DETECTOR APERTURE.

EXTRAORDINARY STRONG PERIPHERAL DISTURBANCES MAY EFFECT THE SENSITIVITY, AS

WELL AS ELECTRICALLY CONDUCTIVE FIBERSWHICH CAN CREATE A“PRODUCT EFFECT”.

IF SAMPLES ARE PROVIDED WE CAN TEST THEM IN OUR R&D FACILITY TO DETERMINE

PROJECT SPECIFIC SENSITIVITIES.

TO CALCULATE SENSITIVITY FOR OTHER METALS USE THE FOLLOWING MULTIPLICATION

FACTOR.

VA (STAINLESS STEEL) = DIAGRAMVALUE x 1TO 2

(FACTOR DEPENDS ONTHE METAL ALLOY)

CU, ALU, BRASS... = DIAGRAMVALUE x 1.2TO 1.8

(FACTOR DEPENDS ONTHE METALTYPE)

0

5,3 7,2 9 103,52,3

5

5

10

15

20

25

10 15 20 25

NEEDLE WEIGHT IN MG

NEEDLE LENGTH IN MM

SE

NS

ING

HE

IGH

TIN

MM

ME

TR

ON

04

Pro

fiLin

eM

ETRON

04 ProfiLine

METRON 04 ProfiLine

CAN-BUS- TECHNOLOGY

ELECTRONIC PRODUCT EFFECT SUPPRESSION

AUTO-SETUP-ROUTINE

MULTI FUNCTION FILTER SYSTEM

AUTO-BALANCE

SELFMONITORING

FOR OPTIMUM RELIABILITY AND EASE

OF SERVICE. MINIMAL WIRING BETWEEN THE ELECTRONICS AND THE

SENSING COIL, AS WELL AS INTERNALLY IN THE MULTISEGMENT SENSING

COIL. THIS TECHNOLOGY INCREASES RELIABILITY. SPACE SAVING SMD

TECHNOLOGY GUARANTEES QUALITY AND RELIABILITY. AUTOMATED

COMPONENT PLACEMENT ELIMINATES MANUFACTURING ERRORS. EACH

MOTHERBOARD IS 100% TESTED AND UNDERGOES A BURN IN AND

ARTIFICIAL AGING PRIOR TO INSTALLATION. MESUTRONIC PRODUCTS ARE

MANUFACTURED ACCORDING TO CURRENT SAFETY, NATIONAL AND

INTERNATIONAL REGULATIONS.

GUARANTEES HIGHEST SENSITIVITY. REAL PRODUCT PARAMETER

EVALUATION ALLOWS FOR TARGETED ELIMINATION OF INTERFERENCES

WHICH ARE CAUSED BY “PRODUCT EFFECT”.

WITH INTERFERENCE S IGNAL

SUPPRESSION AND AUTOMATIC SENSITIVITY CALIBRATION.

HIGHLY SELECTIVE

DIGITAL FILTER AND DYNAMIC RESPONSE FILTER FOR RELIABILITY IN

HARSH INDUSTRIAL ENVIRONMENTS.

AUTOMATICALLY DETECTS AND COMPENSATES

FOR ANY CHANGES IN THE SIGNAL DURING NORMAL OPERATION. (E.G.

TEMPERATURE VARIATIONS)

FOR THE CONTINUOUS MONITORING OF THE

UNIT. FAULT INDICATION THRU RELAYS AND TEXT DISPLAY.

TOUCHPAD OPERATED USSER FRIENDLY TOUCHPAD OPERA-

TION. OPERATING ELEMENTS AND DISPLAY ARE SHIELDED AGAINST HU-

MIDITY AND DUST.

3 BUTTON TOUCHPAD CONTROLS OFFER EASY TO USE

MENU DRIVEN COMMANDS - MULTIPLE LANGUAGES ARE ALSO AVAIL-

ABLE.

4-LINE BACK-LIT LCD DISPLAY

3-LEVEL PASSWORD

PERMANENT DATA STORAGE

UNIVERSAL USE!

SERIAL DATA COMMUNICATION

WITH METAL SIGNAL INDICA-

TION. ADDITIONAL LED INDICATOR LAMPS ARE BUILT IN TO INDICATE

METAL DETECTION OR FAULTS.

PROTECTION WITH INTER-CHANGEABLE

CODE NUMBERS.

PERMANENT STORAGE OF OPER-

ATING DATA EVEN DURING LONG POWER OUTAGES SAFEGUARDS

AGAINST LOSS OF PRODUCTION. TIME DEPENDENT PARAMETERS SUCH

AS METAL SIGNAL DELAY OR SIGNAL TIME ARE ADJUSTED IN REAL TIME.

INPUT FOR LINE OR UNIT IDENTIFICATION DATA IS ALSO POSSIBLE.

ALL INPUTS AND OUTPUTS ARE ADJUSTABLE AS

REQUIRED BY THE PROJECT OR CUSTOMER. THE ELECTRONICS CAN BE

USED TO REGULATE OTHER DEVICES AS WELL. THE STANDARD PROGRAM-

MING ALLOWS FOR CONNECTION OF A SECOND RESET WHICH RESTS THE

ACTIVE 24V OUTPUT WHICH POWERS, FOR EXAMPLE, AN ACOUSTIC

“METAL SIGNAL” DEVICE. AFTER THE METAL PARTICLE WAS FOUND AND

REMOVED, THE OPERATOR PUSHES RESET 1, WHICH RESETS ALL OUTPUTS

AND STARTS PRODUCTION AGAIN. OR THE METAL DETECTOR MAYBE

SWITCHED ON OR OFF WITH AN EXTERNAL 24 V SIGNAL. WE OFFER AN

INFINITY OF POSSIBILITIES TO ALLOW OUR CUSTOMER THE FREEDOM TO

CHOOSE.

VIA AN RS 232, 422, 485 TO

TRANSMIT DATA TO A LOCAL OR CENTRALIZED PRINTER. (MAXIMUM CA-

BLE LENGTH OF UP TO 1.2 KM DEPENDING ON SERIAL CABLE).

CONTROL UNIT AMD 04 (VERSION 4.1)ADVANTAGES THAT WILL CONVINCE YOU !

ME

TR

ON

04

Pro

fiLin

eM

ETRON

04 ProfiLineM

ETRON

04 ProfiLine

BUNTING

AdapterplatteADAPTOR PLATE

werkseitig für Detektor belegtASSIGNED BY MANUFACTURER FOR DETECTOR

NetzMAINS

METRON 04 Pr

CONTROLS

TECHNICAL DATAZH06/05,CA V042–001:YLPPUS REWOP

CURRENT CONSUMPTION MAX. 0,75 A)WOLB WOLS(A2:ESUF

TYPE OF PROTECTION: IP 54WORKING TEMPERATURE RANGE: -10 °C TO +50 °CSTORAGE TEMPERATURE RANGE: -10 °C TO +60 °CREL. HUMIDITY:

:DEEPS GNIYEVNOC,LEETSNOBRACFOEDAMXOBLORTNOC DNA DAEHROTCETED:SLAIRETAM

PAINTED (RAL 3027 = RASPBERRY RED)SENSING AREAS MADE OF BETONOL (ANTISTATIC)

INTERCONNECTING CABLES: SEARCH COIL / CONTROL CABINET = 2 M LONG)NIP GNIHTRAEDNAELOPOWT( GULPHTIWELBACM8,1.PPA:ELBAC REWOP

(US-VERSION WITH US-STANDARD PLUG)

0 TO 95 % (WITHOUT CONDENSATION)

OTHER VERSIONS AVAILABLE

OPTICALINDICATORS

4-LINE LCD DISPLAY

INPUT KEYS

ENTER KEY

ELECTRONICS CABINET (BOTTOM VIEW)

POWER METAL FAULT

METAL DETECTOR

M 20

POWERSUPPLY

PG 16

(PRINTER CONNECTION)CABLE ENTRIES TO BE USED BY THE CUSTOMER

M 20

CAN-BUSWIRING

TO THE SENSOR COIL

M 20 M 16

Netz

M 20

PRODUCT TEMPERATURE: MAX. 50°C0,05 TO 10 M/S

METRON 04 ProfiLine

TECHNICAL DATA

CONTROLS

METRON 04 ProfiLine

power supply: 100 v - 240 v Ac, 50 / 60 HZcurrent consuMption: MAX. 0,75 AFuse (operAting unit):Fuse (MAins electronic circuitry):

1,6 A (slow Blow)2,5 A (slow Blow)

type oF protection: ip 54worKing teMperAture rAnge:storAge teMperAture rAnge:product teMperAture:

- 10⁰ c to + 50⁰ c- 10⁰ c to + 60⁰ cMAX. + 50⁰ c

relAtive HuMidity: 0 to 95 % (witHout condensAtion)conveying speed (stAndArd version):conveying speed (HigH speed version):

0,005 M/s to 10 M/s0,042 M/s to 20 M/s

MAteriAls:

interconnecting cABles:power cABle:

detector HeAd And control BoX MAde oF cArBon steel, pAinted (rAl 3027 = rAspBerry red)sensing AreAs MAde oF Betonol (AntistAtic)seArcH coil / control cABinet = 2 M longApp. 1, 8 M cABle witH plug(two pole And eArtHing pin)(us-version witH us-stAndArd plug)


METRON 04 ProfiLine

INPUTS AND OUTPUTS

a

b

cg h i j k

d f

e

b jCAN-BUS +

(SEARCH COIL) USED BY THE MANUFACTURER!

POWER OUTPUT

INPUTS AND OUTPUTS CAN BE

PROGRAMMED AS REQUIRED.

1) STANDARD PROGRAMMING

SERIAL DIGITAL INTERFACE

RESET

CONTROL INPUTS1)

ACTIV-OUTPUTS1)

RS 232, 485 (CAN BE SWITCHED) OR 422

(UNLESS OTHERWISE SPECIFIED, RS 232 PRE-PROGRAMMED)

a

c

c + f

d

RESET 1 (MAIN-RESET): CONNECT ONLY FLOATING CONTACTS

RESET 2 (ALARM-RESET): CONNECT ONLY FLOATING CONTACTS

3 – INDIVIDUALLY PROGRAMMABLE BY THE FACTORY (PLEASE CONTACT OUR APPLICATION TEAM)

ACTIVE-OUTPUT 1: SWITCHES WHEN METAL IS DETECTED

NORMAL OPERATION 0 V

IF METAL IS DETECTED + 24 V

PULSE DURATION (RESET BY HAND): PERMANENT SIGNAL UNTIL RESET

BUTTON 1 IS PRESSED

PULSE DURATION (AUTO-RESET): 0,1 SEC. TO 30 SEC. (ADJUSTABLE)

DELAY TIME (AUTO-RESET): 0,0 SEC. TO 30 SEC. (ADJUSTABLE)

ACTIVE-OUTPUT 2: SWITCHES WHEN METAL IS DETECTED

NORMAL OPERATION 0 V

IF METAL IS DETECTED + 24 V


BUTTON 2 OR 1 IS PRESSED


DELAY TIME (AUTO-RESET): 0,0 SEC. TO 30 SEC. (ADJUSTABLE)

38 RESET 2

RESET 1

37

39

36

4847

49

46


INPUTS AND OUTPUTS

METRON 04 ProfiLine

RELAY 2 (FAULT)1)

g

FLOATING RELAY-CHANGE OVER CONTACT ACTUATED BY SELF MONITORING SYSTEM

MAX. CONTACT LOAD : 250 V / 3 A

RELAY 1 (METAL)1)

POWER OUTPUT

POWER INPUT

h

i

k

FLOATING RELAY-CHANGE OVER CONTACT ACTUATED WHEN METAL IS DETECTED

MAX. CONTACT LOAD: 250 V / 3 A


BUTTON 1 IS PRESSED


DELAY TIME: 0,0 SEC. TO 30 SEC. (ADJUSTABLE)

VOLTAGE IS IDENTICAL TO THE POWER INPUT VOLTAGE

100 - 240 VAC , 50/60 HZ


89

7

56

4

2a3a

1a

2 N

N

3 L1

L1

1 PE

PE

(NORMAL-OPERATION)

(NORMAL-OPERATION)


© C

opyr

ight

MES

UTR

ON

IC G

erät

ebau

Gm

bH, G

erm

any

MESUTRONIC Gerätebau GmbH · Hackenfeld 13 · 94259 kirchberg im Wald · GermanyTel. +49 9927 9410-0 · Fax +49 9927 1732 ·[email protected] · www.mesutronic.de

meSUtroNIc Gerätebau GmbH

a team of SpecIalIStS DeDIcateD to Develop, maNUfactUre aNDmarket tHe worlD´S fINeSt electroNIc metal DetectIoN aN Sepa-ratIoN eqUIpmeNt for all INDUStrIeS. It IS oUr Goal to provIDe tHe optImUm SolUtIoN to meet every crIterIa. maNy yearS of ex-perIeNce provIDING HUNDreDS of DetectIoN coIlS wItH varIoUScoNtrolS aS well aS a mUltItUDe of mecHaNIcal SeparatING aNDSortING compoNeNtS are at oUr DISpoSal. we pool oUr kNoleDGe aND experIeNce to offer al SolUtIoN to vIrtUally aNy applIca-tIoN.

„wHeN otHerS Say No, we Say letS Go!“

let oUr team provIDe yoU wItH tHe optImUm SolUtIoN for yoUr metal coNtamINatIoN.

© C

op

yrig

ht

MES

UTR

ON

IC G

erä

teb

au G

mb

H, G

erm

any

MESUTRONIC Gerätebau GmbH • Hackenfeld 13 • D-94259 Kirchberg, Wald

Tel.: +49- (0)9927 / 9410-0 • Fax: +49- (0)9927 / 1732

E-Mail: [email protected] • www.mesutronic.de

THE MESUTRONIC GERÄTEBAU GMBH IS A GLOBALLY ACTIVE COMPANY IN THE

FIELD OF INDUSTRIAL METAL DETECTION TECHNOLOGY WITH HEADQUARTERS IN

GERMANY.

A TEAM OF SPECIALISTS FOCUSES FOR DECADES SUCCESSFULLY ON THE DEVEL-

OPMENT, MANUFACTURING AND DISTRIBUTION OF ELECTRONIC METAL DETEC-

TORS AND SEPARATORS FOR ALL INDUSTRIES. DAILY WE TAKE UP THE CHAL-

LENGE TO SOLVE INDIVIDUAL PROBLEMS RELIABLE AND TAILORED TO THE

CUSTOMER. WHERE OTHERS SAID “NO” LONG AGO OUR TASK JUST STARTS. TRUE

TO THE MOTTO: "NOTHING IS IMPOSSIBLE.“

THOUSANDS OF DETECTOR COILS, VARIOUS TRANSMITTERS AND A VARIETY OF

EJECTORS AND MECHANICAL COMPONENTS CAN BE COMBINED DEPENDING ON

THE TASK AND SERVE AS A BASIS FOR PRACTICAL AND FLEXIBLE SOLUTIONS.

THROUGH YEARS OF CLOSE COLLABORATION WITH OUR CUSTOMERS FROM

VARIOUS INDUSTRIES, WE HAVE SHAPED OUR EQUIPMENT PROGRAM CONTINUAL

WITH THE RESULT THAT ALL MESUTRONIC PRODUCTS ARE NOW LEADING THE

WAY IN PERFORMANCE, QUALITY, RELIABILITY AND HANDLING.

IN ADDITION, OUR WORLDWIDE SALES AND SERVICE NETWORK ENSURES THAT

ON ALL CONTINENTS OF THE WORLD A PROFESSIONAL COMPETENT CONTACT

PERSON IS AVAILABLE FOR YOU.

Burnt Meadow Road, Redditch, Worcestershire, UK, B98 9PATel: +44(0)1527 65858E-Mail: [email protected] www.mastermagnets.com

Service and CalibrationBunting service engineers are available at short notice to service and calibrate our full range of detectors in the UK and overseas. Bunting offers 3 levels of protection designed to provide specific services to optimise the performance and lifespan of metal detection equipment

Pro-Start™Pro-Start™ commissioning coverage ensures that a metal detector performs to company expectations from its first day on the job. A factory-trained service technician will be on-site to verify the installation, calibrate the metal detector to achieve top performance and train personnel. Pro-Start includes a calibration label for the detector, a complimentary set of test pieces (specify size and type on purchase) and a detailed calibration record for company files. It also extends the original one-year factory warranty to two years and includes two years of phone-based technical support.

Pro-Maintenance™Pro-Maintenance™ keeps the metal detector operating like new, which is critical, considering the impact of poor performance on customer satisfaction and other consequences. It provides either annual (Gold plan) or biannual (Platinum plan) visits by factory-trained service technicians to service and calibrate the metal detector and ensure the system is running the latest accurate software. The Pro-Maintenance plan also includes significant parts and labour discounts on any needed spares and repair work, on-site training for personnel during service & calibration visits and two years of phone based technical support.

Documents

metal DeteCtor - Bunting · 2021. 2. 22. · the metal detector is to be positioned in the center of the metal free zone. the values are for reference purposes and should, if possible,