Upload
darlene-shields
View
213
Download
0
Embed Size (px)
Citation preview
MEMSCAP/Mentor Graphics MEMS Solution: A Partnership Model
Major Features:
Mixed Technology Solution
MEMS Intellectual Properties
• Access to MEMSCAP expertise and Intellectual Properties (IP) in the Micro-Electro-Mechanical System (MEMS) technologies
• Support for Mentor Graphics proven Mixed- Signal Design and Layout tools
• Access to the main MEMS foundries
• Model Generation Tools and Services
• System and Component Engineers Design Flows
• Dedicated support infrastructure from MEMSCAP and Mentor Graphics
Mentor Graphics Corporation offers a full range of Analog and Mixed Signal Solution into an integrated design environment such as AccuSimII™/Eldo™ and Continuum™. Applied to Telecommunication, Automotive or Aerospace and Biomedical system design, Mentor Graphics design solution enables system designers to fully leverage MEMS component behavioral models in HDL-A™ (soon into VHDL-AMS and Verilog-A standards) for system-level verification and manufacturability analysis with Opsim™/Aspire™. To extend this A/M-S simulation design flow, a complete physical design and extraction solution with ICstation™ and Calibre™/Xcalibre™ with parameterized layout generators of MEMS specific structures provide the productivity required for advanced products development.
MEMSCAP main area of business is the design and development of MEMS technology products (software and hardware). The company offers comprehensive solutions for system designers to fully leverage MEMS components for integration of new and more competitive functions within their systems, predominantly by providing customized and technology specific MEMS Engineering Kits, Model Generation Tools and Services and MEMS Intellectual Properties. MEMSCAP’s mission is to bridge the gap between foundries and EDA vendors to enable a full and low cost solution from concept to silicon.
Mixed Technology / MEMS Design Flow
• VHDL/Verilog and HDL-A support for mixed-signal electronic modeling
• HDL-A modeling of MEMS components
• Continuum mixed-signal, multi-level, multi-technology, multi-disciplinary simulation environment
• ICStation layout environment supports schematic driven layout, place & route and layout verification
• Opsim and Aspire optimization and manufacturing yield management tools
Dedicated MEMS Library and Process support
• HDL-A simulation models for MEMS devices
• Technology specific layout generators for mechanical structures
• Parameterized design rules for DRC and LVS of MEMS
• Support for Bulk and Surface Micromachining
• Link to field solvers: FEM/BEM to HDL-A Translator
• Etching verification and cross-section viewer
The Most Effective Link to the MEMS Foundries
• CMP-Supported MEMS Technologies
• MCNC Multi-User MEMS Processes (MUMPs)
• AMS, Bosch and SensoNor Microsystem Technologies - Very Soon -
For further information, contact :
Corporate HeadquatersMentor Graphics Corporation
8005 S.w. Boeckman RoadWilsonville, Oregon 97070-7777U.S.A.
Phone: 503-685-7000Fax: 503-685-1202
MEMS Engineering Kit Features
MENTOR GRAPHICS TOOLS
Simulation Model
Layout Generators
MEMS DesignRules
Cross-Section Viewer
Etching Verification
Link to Field Solvers
Opsim™Aspire™
OPTIMIZATION/YIELD MANAGEMENTContinuum™AccuSimII™QuickSimII™QuickHDL™
VHDL/HDL-A™/Schematics
ICStation™ICBlocks™/AutoCells™ICVerify™Calibre™/Xcalibre™
ELECTRO-MECHANICAL MODELING
MIXED-SIGNAL SIMULATION
PHYSICAL LAYOUT
MEMS ENGINEERING
KIT
MEMSCAP
155/157, Cours Berriat38028 Grenoble Cedex 1FRANCE
Phone: 33- 4 76 70 93 70Fax: 33- 4 76 48 93 38
MEMS Devices Manufactured on the MUMPs technology