Medtech Evolution Installation Guide Version 1.5.3.11 ......1. Connect to your Client Desktop / Citrix / Terminal to install the application. 2. You must have Administrative privileges

Medtech Evolution Installation Guide 1.5.3.11

© Copyright Medtech Limited Page 1 of 37

Medtech Evolution

Installation Guide

Version 1.5.3.11

(January 2015)

These Instructions contain important information for all Medtech Evolution users and

IT Support Personnel. We suggest that these notes are filed safely for future

reference.



Table of Contents

Chapter 1: Pre-Requisites Checklist ................................................................................ 3

Chapter 2: Locating the Installer .................................................................................... 4

Fresh Installation .............................................................................................................. 4

Chapter 3: Deployment model ...................................................................................... 5

Chapter 4: Installation framework .................................................................................. 6

Chapter 5: Installation Guide ......................................................................................... 7

Database Server ............................................................................................................... 7

Fresh database ........................................................................................................ 7

Application Server (Client/Citrix/Terminal) ........................................................................ 10

Application Services Server ............................................................................................. 15

Installing Medtech Message Transfer Service ....................................................... 15

Installing Medtech NIR Message Transfer Service ................................................. 19

Installing Medtech Shell Service ............................................................................ 23

Medtech Diagnostic Services ................................................................................ 27

Medtech Fax Service ............................................................................................. 32

Chapter 6: Post Installation Checklist ........................................................................... 37



Chapter 1: Pre-Requisites Checklist

1

The instructions in the documents listed below must be read before you

proceed with Installation:

A. Software requirement specification(SRS)

B. Evolution Database Server Configuration guide

C. Evolution Database Maintenance guide

2

The following software’s must be installed:

A. .NET framework 4.5

Download Site:

http://www.microsoft.com/en-

in/download/details.aspx?id=30653

B. SAP Crystal Report (v. 13.0.9.1312)

Download Site: http://scn.sap.com/docs/DOC-7824

C. Adobe Acrobat Reader 11.7

Download Site: http://get.adobe.com/reader/

3 License should be procured from the Medtech Sales team.

4 The Release Notes and Installation Instructions are read and

understood.

5 All Brief casing laptops should be disconnected from the network.

http://www.microsoft.com/en-in/download/details.aspx?id=30653



http://scn.sap.com/docs/DOC-7824

http://get.adobe.com/reader/



Chapter 2: Locating the Installer Medtech Evolution is available as a download exe in the Medtech Global website:

Fresh Installation The following table provides the list of the download executables to be installed:

Installed to 32 Bit 64 Bit Purpose

Database Server EvolutionDB_Fresh1.5.3.11 Create Fresh Database

Application Server

Evolution_324Bit_1.5.3.11 Evolution_64Bit_1.5.3.11 Installs the Evolution application

Application Services Server

Evolution_32Bit_MSGTNFR1.5.3.11

Evolution_64Bit_MSGTNFR1.5.3.11

Installs the Message Transfer

service

Evolution_32Bit_NIRMSGTNFR1.5.3.11

Evolution_64Bit_NIRMSGTNFR1.5.3.11

Installs the NIR Message

Transfer service

Evolution_32Bit_SHELLSRV1.5.3.10

Evolution_64Bit_SHELLSRV1.5.3.10

Installs the Shell service

Evolution_32Bit_FAX1.5.3.10

Evolution_64Bit_FAX1.5.3.10

Installs the Fax Service

Evolution_32Bit_DGNSSRV1.5.3.9

NA Installs the Diagnostic service



Chapter 3: Deployment model The deployment model includes 3 layers with recommended and optimal

deployment options:

Note: All these machines can be either Physical or Virtual machines.



Chapter 4: Installation framework The Installation Framework includes installing the download exe’s in three Server

specific options that are represented in the below diagram:

1. MMS Drug Installer is installed in DB Server

2. Medtech Evolution 1.5 is installed in Client/Application Server

3. Medtech Fax Service, Diagnostic Service, Message Transfer Service [NIR] and

Shell Service are installed in Application Services Server



Chapter 5: Installation Guide

Database Server Fresh database

1. Execute EvolutionDB_Fresh1.5.3.11.exe, which is available as a part of the

download installer.

NOTE: Make sure to execute the installer from the respective database

server.

2. Double click or right click the EvolutionDB_Fresh1.5.3.11.exe and click ‘Run

as Administrator’ to launch the Installation Wizard.

3. Click ‘Next’ button to continue.



4. Click on ‘Browse’ button to select the License File.

5. Click on ‘Next’ button to continue.

6. Click ‘Browse’ button to select the Database Server from the list or

manually type the Database Server Name.

7. Select the option ‘SQL Server authentication’. By default this option is

selected.

8. Type in the SQL login credentials for the corresponding SQL server.

9. Click on ‘Next’ button.

10. Enter the database name for creating a fresh database.

11. Click on ‘Browse’ button and set MDF file path for the fresh database.

12. Click on ‘Browse’ button and set LOG file path for the fresh database.

13. Click on ‘Next’ button.



14. Click ‘Install’ button to install to a fresh database. Queries will get

executed.

15. Click “Finish” button to complete installation.

16. Verify the log files in the following path ‘C:\Users\< User Profile >

\AppData\Local\Temp\Evolution ‘ to check the error messages as per

the screenshot below:



Contact Medtech Support Personnel immediately if you encounter any of the

messages similar to the messages provides in the attachment (LogFile.txt) or e-mail

us to [email protected]

LogFile.txt

Application Server (Client/Citrix/Terminal) Please ensure that you have checked all the items in the checklist:

1. Connect to your Client Desktop / Citrix / Terminal to install the application.

2. You must have Administrative privileges to access the Client Desktop / Citrix /

Terminal.

3. After successful login to the server, the following window is displayed when you

execute the EvolutionClient_32Bit_Fresh1.5.3.11.exe/

EvolutionClient_64Bit_Fresh1.5.3.11.exe files.

4 Medtech Evolution will be installed in C:\Program Files (or) Program Files(x86),

by default. The installation folder can be changed by clicking the ‘Browse’ and

selecting another folder.

mailto:[email protected]



5 To continue with the Installation, click on ‘I accept.

6 Upon selecting I accept the terms of the license agreement and clicking Next

button, the installation will continue.

7 The License file must be placed in your local machine.

8 Browse to the path where the License file is located and click on the ‘Next’

button.



9 The SQL database instance, its corresponding SQL credentials, and the

configured database should be selected.

10 Click on ‘Browse’ button to select the Database Server from the list or manually

type the Database Server Name.

11 Type in the SQL login credentials for the corresponding SQL server.

12 Once the database connection is established, the installer will be ready to

install the application. Click ‘Next’ to continue.



13 Click Install, the installation process will commence.

14 Click on “Finish” to complete installation and exit the Installation Wizard.

15 Open the application by double clicking the short cut icon “Medtech Evolution

1.5”.



16 Log into the application with the appropriate credentials. The application

prompts for the License File.

17 Click on the OK button. The Import License window is displayed.

18 Browse and select the License file from the path where license file is located.

19 Click on the ‘Import’ button. License File is imported successfully.



20 Click on the ‘Login’ button to launch the application.

Application Services Server Installing Medtech Message Transfer Service

Ensure that you have completed and checked all items in the Installation Pre-

Requisites Checklist.

1. Connect to your application services server to install the application.

2. Make sure you have sufficient login privilege to access the application

services server

3. Upon login to the server, execute Evolution_32Bit_MSGTNFR1.5.3.11.exe or

Evolution_64Bit_MSGTNFR1.5.3.11.exe (By double clicking or Right click Run

as Administrator).

4. Welcome to Install Shield Wizard for Message Transfer Service window is

displayed

5. Click on Next button to proceed further



6. Go to application installed path (“C:\Program Files\” (or) “Program Files(x86)

\”) and check MessageTransferService folder is created

7. If the installation path has to be changed then click on Change Button to

select the path.

8. Click on Next button

9. Read the license agreement and select the option I accept the terms in the

license agreement.

10. Click on Next button, the Database Server window is displayed.



11. Enter the Database Server name or Click Browse Button to list the Database

Server

12. Select the Database Server from the list

13. Enter SQL server credentials

14. Enter the Database Name or Click Browse Button to list the Database Name

15. Select the Database from the list

16. Select the database to install.

17. Click on the Next Button. The Ready to Install Program window is displayed.

18. Click on Install Button to install the Message Transfer Service program. The

window displays the status with a progress bar.



19. Make sure the license file is placed in your machine locally .

20. Browse and select the License file from the path where license file is located

and click on Next button.

21. Click on the Next Button



22. Click Finish button to complete installation

23. Go to application installed path (“C:\Program Files\” (or) “Program

Files(x86) \”) and check MessageTransferService folder is created and

check the respective dll’s are placed inside the Folder.

Installing Medtech NIR Message Transfer Service


Requisites Checklist



services server

3. Upon login to the server, execute Evolution_32Bit_NIRMSGTNFR1.5.3.11.exe or

Evolution_64Bit_NIRMSGTNFR1.5.3.11.exe (By double clicking or Right click

Run as Administrator).



4. Welcome to Install Shield Wizard for NIR Message Transfer Service window is

displayed



Files(x86) \”) and check NIRMessageTransferService folder is created.


select the path.





license agreement.



Server









18. Click on Install Button to install the NIR Message Transfer Service program.

The window displays the status with a progress bar.

19. Make sure the license file is placed in your machine locally .








Files(x86) \”) and check NIRMessageTransferService folder is created and


Installing Medtech Shell Service


Requisites Checklist





services server

3. Upon login to the server, execute Evolution_32_SHELLSRV1.5.3.10.exe (By

double clicking or Right click Run as Administrator).

4. Welcome to Install Shield Wizard for Medtech Shell Service window is

displayed



Files(x86) \”) and check MedtechShellService folder is created or not.




select the path.



license agreement.



Server




13. Enter SQL server login credentials





18. Click on Install Button to install the Medtech Shell Service program. The


19. Make sure the license file is placed in your machine locally.








Files(x86) \”) and check MedtechShellService folder is created and check

the respective dll’s are placed inside the Folder.

Medtech Diagnostic Services







services server

3. Upon login to the server, execute Evolution_32Bit_DGNSSRV1.5.3.9.exe (By

double clicking or Right click Run as Administrator).

4. Diagnostic Service window is displayed

5. Destination Folder window is displayed


Files(x86) \”) and check MedtechDiagnosticService folder is created or not.




8. License Agreement window is displayed

9. Select the option “I accept the terms in the License Agreement”


11. Database Server window is displayed

12. Enter the Database Server or Click Browse Button to list the Database Server


14. Enter the SQL server credentials



17. Select the database to install



18. Click on Next Button

19. Ready to Install Program window is displayed


21. Diagnostic Service Installation window displays the status with a progress bar



22. Make sure the license file is placed in your machine locally


and click on Next button




25. Click on Finish button


Files(x86) \”) and check MedtechDiagnosticService folder is created and


Medtech Fax Service





services server

3. Upon login to the server, execute Evolution_32Bit_FAX1.5.3.10.exe or

Evolution_64Bit_FAX1.5.3.10.exe (By double clicking or Right click Run as

Administrator).



4. Welcome to Install Shield Wizard for Medtech Fax Service window is

displayed



Files(x86) \”) and check MedtechFaxService folder is created


select the path.


9. Read the license agreement and select the option “I accept the terms in

the License Agreement” and click on Next button.




11. Click on the Next button


Server






18. Click on the Next Button. The Ready to Install Program window is displayed



19. Click on Install Button to install the Medtech Fax Service program. The


20. Make sure the license file is placed in your machine locally.






23. Click on Finish Button to complete installation

24. Go to application installed path (“C:\Program Files\” (or) “Program Files(x86)

\”) and check MedtechFaxService folder is created and check the

respective dll’s are placed inside the Folder.



Chapter 6: Post Installation Checklist

1. If prompted to do so after Application Server installation, a reboot of

the server has been completed.

2. Login to Evolution and ensure that the database connection is

successful.

3.

Check the current Evolution installed version [Help About Medtech

Evolution]. After the upgrade has been run, this should read as

1.5.3.11.

4.

Please ensure that the following utilities/services are started

(services.msc):

Medtech Message Transfer Service Medtech NIR Message Transfer Service

Medtech Shell Service Medtech Fax Service Diagnostic Services

5. Please ensure that all staff can successfully log into Evolution without

errors.

6. Any errors encountered during the post installation process have

been recorded and provided to Medtech Support for assistance.

7. Make sure that the login user has the Administrative permission on the

computer in which you are installing the services.

For further information, or any other queries regarding the changes in this release,

please contact Medtech Support as follows:

Via the Medtech32 application [Help ► Contact Support]

By email to [email protected]

By fax to 0800 MEDTECH (633 832)

By phone on 0800 2 MEDTECH (633 832)

mailto:[email protected]

Documents

Medtech Evolution Installation Guide Version 1.5.3.11 ......1. Connect to your Client Desktop / Citrix / Terminal to install the application. 2. You must have Administrative privileges