Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
The Mechanical Pipe Cutter™ (MPC™) electromechanical pipe-cutter from Baker Hughes, a GE company (BHGE), reduces logistical and environmental constraints of stuck pipe or pipe recovery operations by providing precise, downhole pipe cutting without the use of ballistics or hazardous chemicals, reducing nonproductive time (NPT), personnel risk, and overall intervention costs.
The MPC performs its precise cutting without damaging external tubulars or control lines. Cutting penetration is continuously measured and controlled from the surface, confirming the cut has been made successfully. The MPC’s temperature and pressure ratings allow operators to cut pipe in hotter and deeper environments, while eliminating
any additional time-consuming pipe recovery operations.
Applications
• Stuck pipe • 27/8-in. to 7-in. downhole pipe
Features and benefits
• Precisely cuts downhole pipe without the use of ballistics or hazardous chemicals
− Reduces logistical and environmental constraints
• Arrives in two 10-ft sections − Allows for easy transportation
for quick offshore or remote deployment
• CPU controlled for precise or difficult cuts
− Ensures efficient cuts to reduce debris and damage to outer strings
• Unlimited setting and resetting − Saves rig and NPT costs by
performing multiple cuts per trip • Surface-monitored cut penetration
− Confirms successful cut to avoid needless trips out of hole
• Cuts a wide range of pipe types—including steel and alloy (chrome) pipe—and sizes compared to conventional cutters
• Small diameter enables use in restricted areas
• Deployable on wireline, tractor, or TeleCoil™ intelligent coiled tubing services
Mechanical pipe cutterAchieve fast and effective pipe recovery
The multiple, clean cuts provided by the MPC eliminate additional fish milling and ensure efficient pipe-recovery operations.
bhge.com
MPC specifications
Tool length 18.16 ft (5.54 m)
Two sections8.33 ft (2.54 m)
9.83 ft (3 m)
Tool diameter
21/8-in. (54-mm) tool cuts 27/8-in. (73-mm) to 4-in. (102-mm) pipe
21/2-in. (64-mm) tool cuts 4-in. (102-mm) to 41/2-in. (114-mm) pipe
31/4-in. (83-mm) tool cuts 4-in. (102-mm) to 7-in. (178-mm) pipe
Rating 392°F (200°C) and 20,000 psi (1,379 bar)
Current pipe cutting sizes
27/8-in. (73-mm) to 7-in. (178-mm) pipe
Maximum wall thickness
0.5-in. (12.7-mm) – 21/8-in. (54-mm) tool
0.68-in. (17.3-mm) – 21/2-in. (64-mm) tool
0.75-in. (19.1-mm) – 31/4-in. (83-mm) tool
© 2017 Baker Hughes, a GE company, LLC – All rights reserved.
Baker Hughes, a GE company, LLC and its affiliates (“BHGE”) provides this information on an “as is” basis for general information purposes and believes it to be accurate as of the date of publication. BHGE does not make any representation as to the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular purpose or use. BHGE hereby disclaims any and all liability for any direct, indirect, consequential or special damages, claims for lost profits, or third party claims arising from the use of the information, whether a claim is asserted in contract, tort, or otherwise. The BHGE logo is a trademark of Baker Hughes, a GE company, LLC. GE and the GE monogram are trademarks of General Electric Company used under trademark license. Mechanical Pipe Cutter, MPC and TeleCoil are trademarks of Baker Hughes, a GE company, LLC.
77228
bhge.com