Upload
meromikha
View
215
Download
0
Embed Size (px)
Citation preview
8/10/2019 ME Detailed
1/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
SEMESTER - III
Applied Thermodynamics
ME 301
Contacts : 4L
Module
No.
Syllabus Conac
!rs
I
1. Review of fundamentals; Heat and work, First law for unsteady flow system
!. "ure #u$stance, "ro%erties of %ure su$stance; "&ases of %ure su$stances' "&ase
rule; "&ase C&an(e "rocesses of "ure #u$stances ) tri%le %t., critical %t.; "ro%erty
dia(rams of "&ase c&an(e "rocesses; "'*'+ surface for %&ase c&an(e;
II
. +&e !nd Law of +&ermodynamics; t&e corollaries - t&eir %roofs; t&e %ro%erty ofentro%y; entro%y c&an(e of a %ure su$stance; +ds euations and calculation of
entro%y c&an(e; conce%t and uses of entro%y; +&e second law of t&ermodynamics
for an o%en system.
4. Reversi$le work and irreversi$ility !
III /. 0awell relations, 2oule +&om%son co'efficient !
I*
. I.C.3n(ine, ir #tandard cycles; 5tto, 6iesel, 6ual Com$ustion
7. Reci%rocatin( air com%ressors; t&e com%ressor cycle wit& and wit&out clearance,
efficiencies; volumetric efficiency - its effect on %erformance
*8. *a%our %ower cycles - its modifications, Re&eat - Re(enerative cycle for steam,
9inary cycle and co(eneration
*I. Refri(eration cycles, reversed carnot cycle; com%onents and analysis of sim%le
va%our com%ression Refri(eration cycle, ctual Refri(eration cycles
1
8/10/2019 ME Detailed
2/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
Sren'h o( Maerials
ME 30)
Contact %er week: 4L
Module
No.
Syllabus Conac
!rs
I 1 Conce%t of mec&anics of deforma$le solids; conce%t of stress develo%ed a(ainst
eternal force%ressure; $rief review of normal and s&earin( stress and strain
1
6eformation of aially loaded mem$ers, statically determinate and indeterminate
%ro$lems.
4
#train ener(y in tension and com%ression 1
II nalysis of 9iaial stresses'0o&rBs circle for $iaial stress; conce%t of normal
stress, %rinci%al stress and %ure s&ear. #&ear strain and s&ear strain ener(y. #tresses
in t&in walled %ressure vessels' tan(ential and Hoo% stress.
Relation $etween s&ear modulus and Doun(Bs modulus.
III / #tresses in $eams; s&ear force @#FA, aial force and $endin( moment @90A;
differential relations for 90, #F and load; #F and 90 dia(rams; $endin( stresses
in strai(&t $eams )symmetric loadin(; stresses in $eams of various cross sections;
stresses in $uilt'u% $eams
7
I* +orsion of a circular s&aft, s&ear ener(y in torsion. Conce%t of closed and o%en
coiled &elical s%rin(s, #tresses and deflection of &elical s%rin(s under aial %ull
4
* 6eflection of statically determinate and indeterminate $eams due to $endin(
moment, rea'moment met&od, #train ener(y met&od' Cati(lianoBs t&eorem,
su%er%osition met&od
7
*I +&eory of columns; eccentric loadin( of s&ort strut; column $ucklin(: 3uler load
for columns wit& %inned ends and ot&er end restraints; em%erical column formulae
) @iA strai(&t line,
Toal & 3"hrs
VII beams of different materials 1hr
VIII differential equation of elastic line
IX Eulers curve; (ii) parabolic and (iii) Rankine ordon! 1hr
2hrs
N$. & Teachers o noe ha hey ha*e o each Module No. & I o +I in 'rea deails.
$oo%s Recommended
1.Elements of "tren#th of $aterials$y +imos&enko - Doun(, /t& 3d.' 3ast west %ress.
!.Introduction to "olid $echanics$y #&ames - "itarresi, rd 3d., "rentice Hall India.
.$echanics of $aterials$y 9eer - 2o&nston, +0H
4.En#ineerin# $echanics of "olids$y 3.". "o%ov; !nd 3d., "rentice Hall India
2
8/10/2019 ME Detailed
3/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
ME 303,A & Maerials Science and Meallo'raphy Theory
Conacs & 3
?ature and %ro%erties of materials : Crystal structures and lattices, crystal im%erfections, sli% and
dislocations, %lastic deformation, %&ase dia(rams, solidification and structure of metals and alloys,
Iron'car$on dia(ram, various ty%es of $onds, mec&anical, ma(netic and electronic %ro%erties, $inary
%&ase euili$rium c&aracteristics of alloy, ternary %&ase dia(ram.
0etallo(ra%&y : #tudy of microstructure
"owder 0etallur(y
Heat treatment %rocesses ' (eneral classifications, various &eat treatment of steels, %ro%erties and
a%%lications of alloy steels, tool steels, stainless steels and cast iron, different &eat treatment furnaces.
Hot and cold workin( of metals, recovery, recrystallisation and (rain (rowt&.
Fracture, fati(ue and cree% %&enomenon in metallic materials.
?on'ferrous materials ' Co%%er and luminium $ased alloys.
0ec&anical, 0a(netic, 3lectrical and 3lectronic %ro%erties of metals, alloys, ceramics,
semiconductors and com%osites.
References :
1. 0aterial #cience and 3n(ineerin( $y *.Ra(&avan, "rentice Hall.
!. Introduction to 3n(ineerin( 0aterials $y 9.=.(arwal, +0H.
. 3lements of 0aterial #cience - 3n(ineerin(, *an 9lack, "earson 3ducation
4. 0ec&anical 0etallur(y $y E.3.6ieter, 0cEraw&ill./. "&ysical 0etallur(y "rinci%les $y R.3.Reed&ill, 3ast'>est "u$lis&ers.
. "rinci%les of 0aterials #cience $y >.F.#mit&, rd ed., 0cEraw&ill.
7. #teel and its Heat +reatment $y =.3.+&elin(, 9utterwort&.
8. 0aterial #cience $y 2. C. nderson, =. 6. Leaver, R. 6. Rawlin(s and 2. 0. leander, C&a%man
Hall, 4t& 3d., 1!.
.0aterial #cience, "alanisamy, #citec&
ME 303,$ Maerial Science and Meallo'raphy /racice
1. #tudy and use of metallur(ical microsco%e.
!. 0etallo(ra%&ic s%ecimen %re%aration, mec&anical %olis&in(, mountin(, and etc&in(.
. 0icrostructure of annealed %ure metals'iron, co%%er, lead, inc alluminium and use of s%ecificetc&ants.
4. 0acro etc&in( and sul%&ur %rintin(.
/. 3lectro %olis&in(.
ME 31 Machine ra2in' Theory
Conracs&
+&eory
+&eory of different "roGections ) "ers%ective and o$liue
#ections : Full, auiliary, revolved
+&eory of Coordinate 6imensionin(, Readin( a missin( line and missin( views
Introduction to "i%e 2oints, welded %i%e Goints
3
8/10/2019 ME Detailed
4/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
Introduction to ssem$ly 6rawin(s
C6 or usin( similar software : #olid, surface, wireframe modelin(, ssem$le of different
com%onents
Re(erences &
1. 0ec&anical 3n(ineerin( 6esi(n $y 2.F.#&i(ley, 0cEraw&ill.
!. 0ac&ine 6esi(n, ?orton, "earson 3ducation
. 6esi(n of 0ac&ine 3lements $y 0.F.#%otts, "rentice Hall.
4. 0ec&anical nalysis and 6esi(n $y .H.9urr and 2.9.C&eat&ak, !nd ed., "rentice Hall.
ME 31 Machine ra2in' /raciceConacs &
#c&ematic %roduct sym$ols for standard com%onents in mec&anical, electrical and electronic
systems, weldin( sym$ols and %i%e Goints;
5rt&o(ra%&ic %roGections of mac&ine elements, different sectional views' full, auiliary sections;
ssem$ly and detailed drawin(s of a mec&anical assem$ly, suc& as a %lummer $lock, tool &ead
of a s&a%in( mac&ine, tailstock of a lat&e, welded %i%e Goints indicatin( work %arts $efore
weldin(, etc.
C6 or usin( similar software : #olid, surface, wireframe modelin(, ssem$le of different
com%onents
$oo%s&
1. +et 9ook on 3n(ineerin( 6rawin(, ?arayana =annaia H, #citec&
!. 0ec&anical 3n(ineerin( 6rawin( and 6esi(n, #. "al and 0. 9&attac&aryya
. 0ac&ine 6rawin( $y ?.6. 9&att
4. 0ac&ine 6rawin( $y ".#. Eill
ME 3) & Ad*anced or%shop Theory 4 /racice
Conacs & 3/
For(in( and 0ouldin(
For(in(: I ntroduction to for(in( tools, furnaces and for(in( mac&ines; to %ractice $asic
for(in( o%erations' drawin( out, u%settin(, neckin( etc.; introduction to for(e weldin(.
Introduction to mouldin( %ractice ) %re%aration of mouldin( sand and use of moulderBs
tools; makin( of moulds $y usin( selected %atternBs; introduction to meltin( and %ourin(
%ractice; e%eriments sand testin(, s&utter inde, mould stren(t&, (rain fineness num$er etc.;
demonstration of inGection mouldin( mac&ine.
4
8/10/2019 ME Detailed
5/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
ME 30# /roducion Mana'emen
Conacs & 3/
0ana(ement a%%roac&es to %lannin(, analysis and control,
Functions involved in a %roduction system;
"roduction cycles, "lannin( functions;
+y%es of industry: 2o$, $atc&, continuous, mass and flow %roductions; 5r(aniation and
%olicies in res%ect of %roduction %lannin( and control; Forecastin( tec&niues;
Resources economics and sc&edulin(, #euencin( and %lant loadin( for o%timal utiliation;
ueuein( models and line $alancin(; 0aterials %lannin( and control;
Inventory mana(ement: 0R", 0R"'II,2I+, *alue analysis; "roductivity analysis; 0ec&anics
of %roduction control.
!5 311 Ci*ics and Indian Consiuion
Conacs & 3
/ar 1- Ci*ics
1A Inde%endent Gudiciary #ystem' #u%reme Court, Hi(& court' functions, %owers, com%osition,
Gud(esB a%%ointment, tenure, removal
!A Functions of &i(& Court' 5ri(inal Gurisdiction, %%ellate Gurisdiction @criminal and civilA,
Gudicial review, court of record, control over su$ordinate court, advisory functions
A 3lectoral system in India' 3lection commission, functions and %owers
4A "u$lic service' structure, com%osition and function of "u$lic commission
/A Fundamental ri(&ts
A Fundamental 6uties
/ar )- Indian Consiuion
7A 9asic Features' "ream$le
8A Federal (overnment wit& unitary features
A "arliamentary (overnment
1A 6irective %rinci%les of t&e state %olicy
11A
8/10/2019 ME Detailed
6/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
!A
8/10/2019 ME Detailed
7/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
. Fluid 0ec&anics - 0ac&inery ) C.Ratnam, .*.=ot&a%alli, I.=. International "u$lis&in( House
Ltd, !1.
4. Introduction to Fluid 0ec&anics - Fluid 0ac&ines ) #om - 9iswas, +0H.
/. Fluid 0ec&anics - 0ac&inery ) C.#." 5G&a, R.9erndtsson, ".?. C&andramouli, 5
8/10/2019 ME Detailed
8/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
Floor mould castin(
Investment castin(
"ermanent mould castin(
6ie castin(, ty%es, met&ods, advanta(es - a%%lications
Castin( defects, ty%es, causes - remedy 1
III eldin' 1)Introduction to metallic %arts
0aGor (rou%in( of Goinin( %rocesses, weldin(,
9road classification of weldin( %rocesses, ty%es and %rinci%les
Fusion weldin(, ty%es, %rinci%les, eui%ments, c&aracteristics - a%%lications
Eas weldin( - t&ermit weldin(
#ources of &eat'electrical ener(y,
rc weldin(
#u$mer(ed arc weldin(
+IE - 0IE;
Resistance weldin(; #%ot - $utt weldin(
#olid state weldin(
"rinci%les, advanta(es - a%%lications of:
Hot for(e weldin(,
Friction weldin(
"recision weldin( %rocesses:
eldin( defects, ty%es, causes - remedy
I+ 6ormin' /rocesses 1)For(in(
Introduction, definition, classification, &ot for(in( - cold for(in(,
c&aracteristics - a%%lications
For(in( material o%erations, eui%ments - tools:
#mit& for(in(
6ro% for(in(
"ressin( or %ress for(in(
Rollin(
Introduction, $asic %rinci%les, &ot rollin( - cold rollin(,
c&aracteristics - a%%lications
8
8/10/2019 ME Detailed
9/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
Rollin( %rocesses - a%%lications, o%erations, eui%ments - roll #tands
>ire drawin( - etensions
9asic %rinci%les - reuirements
Classification, met&ods - a%%lications
"ress tool works
9asic %rinci%les, systems, o%erations - a%%lications
#&earin(, %artin(, $lankin(, %iercin( - notc&in(
Cu%%in(@drawin(A, #%innin( - dee% drawin(
Toal #0hrs
+ .istor& %-/0castin# "lush castin#% principle use -entrifu#al castin#% "hell mould 1
bra2in# and solderin#% "ources of heat3chemical action% lasma arc 'eldin#% ressure
percussion 'eldin#% Electron beam 'eldin#
1
roll "tands% -lassification% methods applications% -oinin# embossin#% *or#in#
dies% materials desi#n% lanks forces needed for shearin# dra'in# operations
1
3hrs
N$. &Teachers o noe ha hey ha*e o each Module No. & I o I+ in 'rea deails.
Te: $oo%s&
1. 0anufacturin( tec&nolo(y, Foundry, Formin( - >eldin('".? Rao.
!. 0anufacturin( #cience' E&os& - 0ullick.
. 0anufacturin( 3n(ineerin( - +ec&nolo(y'# =al%akGian; "u$:ddison >esley.
4. "rinci%les of manufacturin( materials - %rocesses'2ames - Cam%$ell.
Re(erence $oo%s&1. 0anufacturin( en(ineerin( - tec&nolo(y'= 2ain.
!. 0aterials - %rocesses in manufacturin('3." 6e(armo, 9lack - =o&ser, "u$: >iley@1t& ed.A
. "rocesses - materials of manufacturin('R. Lind$er(.
4. Introduction to manufacturin( tec&nolo(y'"" 6ate, "u$: 2aico.
/. 0anufacturin( %rocesses'#.= #&arma - # #&arma, "u$: I.= International
ME #03,$ & /rimary Manu(acurin' /rocess /racice
Conacs & 3/
#and +estin( : "ermea$ility, F#, 0oisture Content, +otal clay content
"attern 0akin(; %attern material, %attern allowances and ty%es of %atterns
0ould makin( "ractice:
8/10/2019 ME Detailed
10/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
0anufacturin( +ec&nolo(y, Rad&akris&nan, #citec&
ME #0# & Roboics and Maerial !andlin'
Conac & 3
Ro$ot definition: Ro$otic systems ' Its role in automated manufacturin(; ro$ot anatomy; ro$ot
classifications and s%ecifications.
Ro$ot kinematics, forward and reverse transformation, &omo(eneous transformations.
Ro$ot actuators and control; "neumatic, &ydraulic and electrical drives and controls used in ro$ots.
Ro$ot end'effectors, mec&anical, ma(netic and vacuum (ri%%ers, (ri%%in( forces RCC and desi(n
features of (ri%%ers.
Ro$ot sensors, different ty%es of contact and non'contact sensors; Ro$ot vision and t&eir interfaces;
Ro$ot lan(ua(es and %ro(rammin( tec&niues.
%%lications of ro$ots in materials &andlin(, mac&ine loadin(unloadin(, ins%ection, weldin(, s%ray
%aintin( and finis& coatin(, and assem$ly, etc.
3conomic %erformance and evaluation strate(ies, Ro$t installation and %lannin(.
#afety features.
References :
1. Industrial Ro$otic +ec&nolo(y ' "ro(rammin( and %%lication $y 0.".Eroover et. al., 0cEraw&ill!. Ro$otics for 3n(ineers $y D.=oren, 0cEraw&ill.
. Ro$ots 0odellin( Control and %%lications wit& #oftware $y ".E.Ranky and C.D.Ho, #%rin(er
*erla( 9erlin.
4. Ro$otics +ec&nolo(y and Flei$le utomation $y #.R.6e$, +0H.
S5$;ECT& MEC!ANISM
S5$;ECT C
8/10/2019 ME Detailed
11/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
utomo$ile #teerin( Eear, +y%es of #teerin( Eears.
/. CAMS:
+y%es of Cams, +y%es of followers, 6efinitions, 0otion of t&e Follower,Layout of Cam "rofiles, nalysis of Cam "rofies.
/L
. $ETS> R
8/10/2019 ME Detailed
12/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
Conacs & 3
Eeneral considerations and %rocedure of 0ac&ine 6esi(n, 6esi(n stress, factor of safety, stress anddeflection analysis, en(ineerin( materials and a%%lications, fits and tolerances, desi(n of fasteners and
fastenin(s ' %in, cotter, knuckle, screw, rivets and welded Goints, desi(n of s&afts and cou%lin(s,
common %ower and force transmittin( %ower screws, $elt drives and s%rin(s, %ressure vessels and
%i%es.
References :
1. 0ec&anical 3n(ineerin( 6esi(n $y 2.F.#&i(ley, 0cEraw&ill.
!. 0ac&ine 6esi(n, ?orton, "earson 3ducation
. 6esi(n of 0ac&ine 3lements $y 0.F.#%otts, "rentice Hall.
4. 0ec&anical nalysis and 6esi(n $y .H.9urr and 2.9.C&eat&ak, !nd ed., "rentice Hall.
ME #1,$ & Machine esi'n /racice
Conacs & 3/
6rawin( $oard eercises com%ati$le to t&e course 03 41@A : 6esi(n of 0ac&ine 3lements.
#crew +&reads, "in 2oints, =nuckle etc
!5 #11 Indian /hilosophy and Economics
Conacs &
/ar 1- Indian /hilosophy
1. >&at is "&iloso%&y @1&rsA 5ri(in of t&e word, 6efinition
!. +&e Ereat Ereek "&iloso%&ers @1&rA
History makers' #ocrates, "lato and ristotle
. Indian "&iloso%&y @!&rsA
5ri(in of t&e word , its relevance
4. 3arly Indian "&iloso%&er+&inkers
+&e four "urus&art&as: 0eanin( and relevance
/. +&e #ystems of Indian "&iloso%&y @!&rsA
+&e 5rt&odo systems
+&e
8/10/2019 ME Detailed
13/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
2amini'"
8/10/2019 ME Detailed
14/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
4A "erformance +est of a muticylinder "etrol 3n(ine $y 0orse met&od.
/A "erformance +et of an I.C. 3n(ine usin( electric @eddy currentA dynamometer.
A
8/10/2019 ME Detailed
15/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
Combusion
Fuels: C&emical t&ermodynamics; C&emical kinetics and reaction mec&anisms, flame %ro%a(ation,
inflamma$ility limits, %remied and diffusion flames, flame sta$ilisation, radiation of flames, &eat and
mass transfer wit& c&emical reactions, com$ustion in fied, movin( and fluidised $eds, com$ustion of
%ulveried coal, oil, (as and %ro%ellants, desi(n as%ect of $urners and furnaces, Com$ustion (enerated
%ollution.
Recommended 9ooks:
1. #.=. #om, Introduction to Heat +ransfer, "HI.
!. Dunus . Cen(el, Heat and 0ass +ransfer, +&e 0cEraw'Hill Com%anies.
. #arif =. 6as, Fundamentals of Heat - 0ass +ransfer, ?arosa.
4. Incro%era, 6e>itt, 9er(mam, - Lavine, Fundamentals of Heat and 0ass +ransfer, >iley India
3dn.
/. ?.*. #uryanarayana, 3n(ineerin( Heat +ransfer, "enram International.
. =reit&, "rinci%les of Heat +ransfer, Cen(a(e learnin(.
7. ".=. ?a(, Heat - 0ass +ransfer, +0H.
8. ".#. E&os&dastidar, Heat +ransfer, 5ford
8/10/2019 ME Detailed
16/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
3%eriments to $e conducted on
#in(le 65F *i$ratory #ystems;
#tatic and 6ynamic $alancin( of rotatin( masses;9alancin( of reci%rocatin( masses;
Eovernors;
Eyrosco%e;
Cam 6esi(n, 5%eration and nalysis
ME- 70#,A Merolo'y 4 Measuremen Theory
Conacs& 3
Module Syllabus Conac
!rs
I 1. Introduction: 6efinition and im%ortance of 0etrolo(y 0easurement; 0et&ods
of measurements ) direct, indirect, com%arison, su$stitution, trans%osition,
deflection and null measurement;
8/10/2019 ME Detailed
17/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
3rrors in measurement ) a$solute, relative, %aralla, ali(nment, loadin(, dynamic and cali$ration
error, "arallelism Cook o%tical com%arator, o%tical %yrometer
$oo%s Recommended&
1. 3.5. 6oe$elin and 6.?. 0anik, 0easurement #ystems) %%lication and 6esi(n, +ata 0cEraw
Hill.
!. R. RaGendra, "rinci%les of 3n(ineerin( 0etrolo(y, 2aico "u$. House.
. 9eckwit&, Lien&ard and 0aran(oni, 0ec&anical 0easurements, "earson.
4. 9ewoor and =ulkarni, 0etrolo(y - 0easurement, +0H.
/. R.=. 2ain, 0etrolo(y, =&anna "u$lication, ?ew 6el&i.
ME 70# ,$ Merolo'y and Measuremen /racice
Conacs &
La$oratory e%eriments for t&e measurement and ins%ection of various %roduct features usin(:'
iA 0ec&anical, %neumatic, o%tical, electrical and electronic instruments,
iiA Co'ordinate measurin( mac&ine @C00A
iiiA Interferometer;
ivA Colour ima(e %rocessin( system for %roduct feature reco(nition, ed(e detection, etc;
vA
8/10/2019 ME Detailed
18/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
?ested classes
5verridin( met&ods
"olymor%&ism
0akin( met&ods and classes final
$stract classes and met&ods
Interfaces
Chaper #& E:cepion handlin' 2ih ry-hro2-cach-(inally consruc @)
+&e 3ce%tion class
Chaper 7& /ac%a'es @)
"acka(e access
6ocumentation comments
Chaper "& Apples @)
Confi(urin( a%%lets
%%let ca%a$ilities and restrictions
Chaper 8& aabase conneci*iy 2ih ;$C @#
Chaper 9&
8/10/2019 ME Detailed
19/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
+&eories; +rait t&eory, $e&avioral t&eory, FielderBs contin(ency t&eory, Harsey and 9lac&ardBs
situational t&eory, 0ana(erial (rid; LikertBs four systems of Leaders&i%.
Communication: 0eanin(; "rocess; communication network; formal and informal
communication; 9arriers to communication and %rinci%les of effective communication;
Controllin(: ?ature, im%ortance and tec&niues; ste%s; feed$ack; concurrent and feed forward
control; %rereuisites of an effective control system; $e&avioral im%lications.
an'ua'e ab 4 Technical Repor riin'
1A +ec&nical Re%ort >ritin(
Re%ort +y%es @5r(aniational Commercial 9usiness "roGect A
Re%ort Format - 5r(aniation of >ritin( 0aterials
Re%ort >ritin( @"ractice #essions - >orks&o%sA
!A Lan(ua(e La$oratory "ractice
Conversation "ractice #essions: @+o $e done as real life interactionsA
+rainin( t&e students $y usin( Lan(ua(e La$ 6eviceRecommended +etscassettes cdBs
to (et t&eir Listenin( #kill - #%eakin( #kill %olis&ed
Introducin( Role "lay - &onin( over all Communicative Com%etence
Erou% 6iscussion #essions and "resentations
+eac&in( #trate(ies of Erou% 6iscussion
Introducin( 6ifferent 0odels - +o%ics of Erou% 6iscussion
3%lorin( Live Recorded E6 #essions for mendin( studentsB attitudea%%roac& - for
takin( remedial measure
Interview #essions and "resentations
+rainin( students to face 2o$ Interviews confidently and successfully
rran(in( 0ock Interviews and "ractice #essions for inte(ratin( Listenin( #kill wit&
#%eakin( #kill in a formal situation for effective communication
+eac&in( "resentation as a skill
#trate(ies and #tandard "ractices of Individual Erou% "resentation
0edia - 0eans of "resentation: 5H""5>3R "5I?+ 5t&er udio'*isual ids
Com%etitive 3amination:
0akin( t&e students aware of "rovincial ?ationalInternational Com%etitive
3aminations
#trate(ies+actics for success in Com%etitive 3aminations
#>5+ nalysis and its %%lication in fiin( +ar(et
19
8/10/2019 ME Detailed
20/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
SEMSTER -+I
ME ,CS "01
8/10/2019 ME Detailed
21/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
,ii C @)0
Inroducion o C )
"ro(rammin( %aradi(ms,Lan(ua(e translator, 9asics of 55", #tructure of C %ro(ram, Class and
o$Gect, $straction and enca%sulation, "olymor%&ism, In&eritance, #tatic and dynamic $indin(.
eclaraion> E:pression and Saemens )
6ata ty%es, *aria$les, Constants, 5%erator and e%ression, 5%erator %recedence and associativity.
#tatements: La$elled, 3%ression, Com%ound, Control, 2um%, 6eclaration, +ry't&row'catc&.
Array> poiner and (uncion)
rray,ddresses, "ointer. Function: 6eclaration, 6efinition and call, Inline function, 0ain function
ar(ument, Reference varia$le, Function overloadin(, 6efault ar(ument, "arameter %assin(, Recursion,
#co%e of varia$le, Return'$y'value and Return'$y'reference, "ointer to function
aa absracion hrou'h classes and user de(ined daa ypes )
Class, 0em$ers, Constructor and destructor, Co%y constructor.
6ynamic memory mana(ement: 5%erators new and delete, 0alloc and free, #tatic mem$er, #co%e of
class names, #co%e of varia$les.
8/10/2019 ME Detailed
22/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
9atc& "roduction and 0ass "roduction, 5%erations on Ca%stan and +urret Lat&es, #in(le #%indle
utomats.
Finis&in(: microfinis&in( o%erations like &onin(, la%%in( and su%erfinis&in(.
References :
1. "rinci%les of 0etal Cuttin("rinci%les of 0ac&ine +ools $y E.C.#en and .9&attac&arya, ?ew
Central 9ook (ency, =olkata.
!. Fundamentals of 0etal Cuttin( 0ac&ine +ools $y E.9oot&royd, +0H.
. "roduction +ec&nolo(y, H0+ "u$lication, +0H.
4. "roduction 3n(ineerin( #ciences $y ".C."andey and C.=.#in(&, #tandard "u$lis&ers Ltd.
/. 0anufacturin( #cience $y .E&os& and .=.0allik, >iley 3astern.
. 0anufacturin( "rocess $y 6anilovsky and 0aslov et. l, 0ir "u$lication.
7 0etal workin( and 0etrolo(y,?arayana,#citec&
ME "0) ,$ & Machinin' /rinciples 4 Machine Tools /racice
Conacs & )/
La$oratory eercises involvin( mac&inin( of com%le %roduct confi(urations, mac&inin( of s%ur and
&elical (ears, relievin( and %rofilin(, contourin(, finis&in( %rocesses and (rindin( of tools and cutters
are to $e done.
22
8/10/2019 ME Detailed
23/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
ME- 703 ,A Insrumenaion> Auomaion and Conrol Theory
Conacs & #
9asic conce%t of Instrumentation: functional elements of an instrument, electrical euivalents of
mec&anical and ot&er systems, classification of systems accordin( to t&eir mode of o%eration , in%ut'
out%ut confi(urations.
#tatistical conce%t: %ro$a$ility distri$ution function, c&i'suare test, curve fittin( tec&niue,
%ower s%ectral density and autocorrelation.
"erformance c&aracteristics: static c&aracteristics, loadin( effects, dynamic c&aracteristics,
freuency res%onse analysis, and res%onse of a (eneral form of instrument.
#i(nal conditionin(: si(nal modulations, deflection $rid(es, a.c carrier systems.
3rrors in measurement: definitions, si(nals and noise in measurement systems.
#ensin( elements: Resistive elements @%otentiometer, strain (a(e, resistance t&ermometersA,
Ca%acitive elements @varia$le se%aration, area, dielectricA, Inductive elements @varia$le
inductance, %otentiometer, varia$le reluctance, L*6+A, ma(netic ty%e @eddy current,
ma(netostrictive, ma(netoresistiveA, Hall devices, #uid. "ieo electric element, "ieo resistive
element.
+&ermal transducers: R+6, t&ermistors, radiation detectors @$olometers, %yroelectric ty%eA
Inroducion o conrol sysem& Conce%t of feed$ack and utomatic control, 3ffects of
feed$ack, 5$Gectives of control system, 6efinition of linear and nonlinear systems,
3lementary conce%ts of sensitivity and ro$ustness. +y%es of control systems,
#ervomec&anisms and re(ulators, eam%les of feed $ack control systems. +ransfer function
conce%t. "ole and Meroes of a transfer function. "ro%erties of +ransfer function.
Mahemaical modelin' o( dynamic sysems& +ranslational systems, Rotational systems,
0ec&anical cou%lin(, Liuid level systems, 3lectrical analo(y of #%rin()0ass'6as&%ot
system. 9lock dia(ram re%resentation of control systems. 9lock dia(ram al(e$ra. #i(nal flow
(ra%&. 0asonBs (ain formula.
Conrol sysem componens& "otentiometer, #ync&ros, Resolvers, "osition encoders.
Conrol Sysem per(ormance measure& Im%rovement of system %erformance t&rou(&
com%ensation. Lead, La( and Lead' la( com%ensation, "I, "6 and "I6 control.
23
8/10/2019 ME Detailed
24/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
ME- 703 ,A Insrumenaion> Auomaion and Conrol /racice
Conacs & 3/
1. #tudy of #tatic C&aracteristics of a 0easurin( Instrument
!. #tudy of 6ynamic C&aracteristics of a 0easurin( Instrument
. #tatistical analysis of errors in measurement
4. Familiariation wit& 0+'La$ control system tool $o, 0+'La$' simulink tool $o - "#"IC3
/. 6etermination of #te% res%onse for first order - #econd order system wit& unity feed$ack on
CR5 - calculation of control system s%ecification like +ime constant, N %eak overs&oot,
settlin( time etc. from t&e res%onse.
7. #imulation of #te% res%onse - Im%ulse res%onse for ty%e', ty%e'1 - +y%e'! system wit& unity
feed$ack usin( 0+L9 - "#"IC3.
8. 6etermination of Root locus, 9ode %lot, ?yuist %lot usin( 0+L9 control system tool $o
for !nd order system - determination of different control system s%ecification from t&e %lot.
. 6etermination of "I, "6 and "I6 controller action of first order simulated %rocess.
1. 6etermination of a%%roimate transfer functions e%erimentally from 9ode %lot.
11. 3valuation of steady state error, settin( time , %ercenta(e %eak overs&oot, (ain mar(in, %&ase
mar(in wit& addition of Lead
ME "03 ,A Ad*anced Machine esi'n Theory
Conacs& 3
1 Cluches& Function, ty%es; Friction clutc&es ) torue ca%acity $ased on uniform %ressure and
uniform wear t&eory for disc and cone clutc&; Centrifu(al clutc&; Friction materials; Considerations
for &eat dissi%ation. #
) $ra%es& Function, ty%es; %ivoted $lock $rake @sin(le and dou$le $lock $rakesA, internal e%andin(
s&oe $rake, self ener(iin( and self lockin(; "ivoted $lock $rake; 9and $rake'sim%le and differential;
3ner(y euation for $rakin( time calculation; 0a(netic and &ydraulic t&ruster o%erated fail'safe
$rakes; 9rake linin( materials; +&ermal considerations durin( $rakin(.#
3 ?ears& 6esi(n o$Gectives, ty%es, terminolo(ies, conGu(ate action and involute toot& %rofile, toot&
systems,standard modules; Eear materials. #%ur Eear : #tren(t& desi(n, static and dynamic
considerations in stren(t& desi(n, Lewis formula, Lewis form factor, $eam stren(t&, 9uckin(&am
euation for dynamic toot& load; 3ndurance stren(t& and wear stren(t&;
6esi(nin( a %inion $ased on a$ove considerations; Helical Eear: Heli an(le, minimum face widt&,
virtual num$er of teet&; #tren(t& desi(n, 9uckin(&am formulae for c&eckin( dynamic load and wear
load. "
# $e*el ?ear& +erminolo(ies, formative num$er of teet&; Lewis euation, dynamic load, endurance
stren(t& and wear stren(t& c&eckin(.
24
8/10/2019 ME Detailed
25/51
8/10/2019 ME Detailed
26/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
). Hydraulic "um%s : %ositive dis%lacement %um%s; constructional features, workin( %rinci%le
and volumetric ca%acity of eternal (ear %um%, vane %um%, aial %iston %um% and radial
%iston %um%. "
3. Hydraulic ctuators : @iA Constructional features of sin(le actin( and dou$le actin( &ydraulic
cylinders; mountin( of cylinders, cus&ionin( of cylinder; different a%%lication of cylinder
t&rou(& mec&anical linka(es; force, velocity and %ower from a cylinder.
@iiA Hydraulic motors; torue, %ower and flow rate in a &ydraulic motor. #
#. Hydraulic *alves : @iA 6irection control valves ) o%eration and (ra%&ical sym$ol of way and
4 way valves; different modes of activation of valves; @iiA 5%eration and (ra%&ical sym$ols of
c&eck valves, %ressure relief valve %ressure reducin( valve, unloadin( valve and flow control
valve.
7. ?#I sym$ols for different &ydraulic com%onents. nalysis of &ydraulic circuits for :
iA sin(le actin( cylinder control,
iiA dou$le actin( cylinder control,
iiiA re(enerative circuit,
ivA %um% unloadin( circuit
vA dou$le %um% &ydraulic system,
viA cylinder sync&roniation circuit
viiA s%eed control of a &ydraulic motor
viiiA circuit to lift and &old &eavy load,
iA automatic seuencin( of two cylinders. 8
". dvanta(es - disadvanta(es of %neumatic system com%ared to &ydraulic system;constructional details and o%eration of a reci%rocatin( com%ressor; workin( %rinci%le and use
of filter, %ressure re(ulator, lu$ricator and silencer; sym$ols of different %neumatic
com%onents; com%ressed air distri$ution system in a %lant; drawin(
%neumatic circuits for different o%erations. "
8.
8/10/2019 ME Detailed
27/51
8/10/2019 ME Detailed
28/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
Condensers ) 9asic ideas. /
0odule'
"ower %lant economics: load curve and various factors, cost of %ower (eneration.Introduction to Hydel, ?uclear and Renewa$le %ower %lants. 4
+otal: 44
Recommended $oo%s&
1. ".=. ?a(, O"ower %lant 3n(ineerin(,P +ata 0cEraw ' Hill.
!. rora and 6omkundwar, O course in "ower %lant 3n(ineerin(P 6&an%at Rai - #ons.
. 0.0.3I' >akil, O"ower %lant tec&nolo(y,P +ata 0cEraw ' Hill.
ME 80) ,A Ad*anced Manu(acurin' Technolo'y
Conac !ours& #
Inroducion o and scope o( he subBec o( Ad*anced Manu(acurin' Technolo'y
Manu(acurin' Sysems and Auomaion &
2o$ s&o%, Flowlines, +ransfer lines, "roGect s&o%, Continuous %rocesses,
Cellular manufacturin( system, Flei$le 0anufacturin( #ystem:
Auomaion&
@iA de(ree of automation and t&eir Gustified a%%lication in different levels of %roduction
@iiA $enefits and draw $acks of em%loyin( automation@iiiA eam%les of conventional non'automatic, semi'automatic and automatic mac&ine tools
@ivA etent of automation in transfer mac&ines
Ine'raed Manu(acurin' /roducion Sysem&
#te%s involved in im%lementation, formin( t&e linked'cell factory.
CNC machine ools and sysems
@iA ty%es of automation ; fied @or &ardA, %ro(ramma$le and flei$le
@iiA need and advanta(es of flei$le automation
@iiiA $asic %rinci%les of ?C system
Componens and heir (uncions in NC machines
@iA Control ; 0C
8/10/2019 ME Detailed
29/51
8/10/2019 ME Detailed
30/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
!. utomation, "roduction systems and CI0 ) 0.". Eroover , "rentice Hall
.4on conventional machinin#) ".=. 0is&ra, ?arosa
4.$anufacturin# science) E&os& - 0ullick, 3>"/.Rapid protot&pin#) . E&os&, 3> "ress
.4ontraditional $anufacturin# rocesses$y Eary F. 9enedict) 0arcel 6ekker
7.$icromachin# of En#ineerin# 0aterial $y 0c Eeon(&, 2.. ) 0arcel 6ekker
8.5dvanced $achinin# rocess% 4ontraditional and .&brid $achinin# rocesses$y Hassan $del'
Eawad 3l'Hofy ) 0cEraw Hill, 0ec&anical 3n(ineerin( #cience
ME 80) ,$ Ad*anced Manu(acurin' Technolo'y /racice
Conac !ours& 3/
1A #tudy of $rasive 2et 0ac&inin(
!A #tudy of
8/10/2019 ME Detailed
31/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
*CR#; dry com%ression and wet com%ression of refri(erant; actual *a%our Com%ression
Cycle 0"
3 ir Refri(eration #ystem @R#A: 9ell'Coleman refri(erator. C5" determination, actual air
refri(eration cycle. 03
# *a%our $sor%tion Refri(eration #ystem @*R#A: dvanta(es of *R# over *CR#. >orkin(
%rinci%le of sim%le *R#, %ractical *R#. Limitations of *R#, maimum C5" of a *R#,
Lit&ium$romide'water #ystem; ua'ammonia systems. 0#
7 3ui%ment and Control: 0aGor Refri(eration 3ui%ment ' Com%ressors: +y%es; reci%rocatin(,
rotary - centrifu(al, volumetric efficiency, Condensers: ty%es used in refri(eration systems;
3va%orators: e%ansion devices: ca%illary tu$es and t&ermostatic e%ansion valves.
0"
" *entilation ) 6efinition - Reuirement, ?atural - 0ec&anical *entilation, *entilation Load
Calculation 03
8 9asic definitions and %rinci%les related to "syc&ometry ; "syc&ometric C&arts - +&eir
8/10/2019 ME Detailed
32/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
Elecrical Machines Theory
Code& 80#A
Conacs & #
. C. ?eneraors and Moors&"rinci%le, construction and function of various %arts, met&ods of
ecitation, armature reaction, c&aracteristics of com%ound mac&ines, mo
tor torue euation, c&aracteristics, startin( and s%eed control a%%lications 8L
Trans(ormers &"rinci%le, construction, emf euation, re(ulation and efficiency.Induction motor : #in(le %&ase I.0 construction, %rinci%les of o%eration of different kinds of sin(le
%&ase L
Inducion Moor&construction, %rinci%le, +orue's%eed C&aracteristic and s%eed control of '%&ase
Induction 0otor. 4L
Alernaor&"rinci%le and construction, ecitation and volta(e re(ulation 4L
Synchronous moor&"rinci%le, c&aracteristics, startin( and s%eed control. 4L
Special Machines&"rinci%le and a%%lication of Fractional kilowatt motor, #te%%er 0otor, c and 6c
#ervo motor. 4L
32
8/10/2019 ME Detailed
33/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
80# ,$ Elecrical Machines /raciceConacs& )/
Constructional features of dc mac&ines.
5%en circuit and load test of dc s&unt (enerator.
#%eed control and c&aracteristics of dc s&unt motor.
5%en Circuit test and #&ort Circuit test, Load test, re(ulation and efficiency of sin(le %&ase
transformer.
#tudy of different %arts of a '%&ase induction motor.
#%eed control and load test on '%&ase Induction 0otor.
Load c&aracteristic of an lternator and determination of volta(e re(ulation.
#tartin( and s%eed control of sin(le %&ase induction motor.
ME,CS891 $MS
Conac
Inroducion @#Conce%t - 5verview of 690#, 6ata 0odels, 6ata$ase Lan(ua(es, 6ata$ase dministrator,
6ata$ase
8/10/2019 ME Detailed
34/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
!5 811 ,i as Gapial 4 ealh o( Naion
,ii Conceps o( Mar%ein'
Conacs &
as Gapial and ealh o( Naions
1. critical analysis of ca%italist %roduction $y =arl 0ar
!. Li$eralism and OIndustrial #ocietyP $y #mit& and #%encer
. +&eories of t&e transition to modern ca%italism: 0ar, 6urk&eim, >e$er
4. Revolution and reform : 0ar and 6urk&eim
/. "olitical (overna$ility of modern ca%italism and its limits: =eynes, =alecki and Hayek
. +&e O6ou$le 0ovementP "olanyi7. Ca%italism and democracy: 0ars&all, Li%set and 9ell
8. +&e moral dimension of ca%italism: Hirsc&man
Conceps o( mar%ein'
. 0arketin( Conce%ts' a%%roac&es to marketin(, study, functional a%%roac&es, marketin(
%rocess
1. 0arketin( "lannin(' nature, %rocess and contents of marketin( %lan, c&an(in( marketin(
environment, analyin( t&e trends and needs in macro environment, economic , tec&nical,
%olitical and socio'cultural environment
11. #ales forecastin(' met&ods, market researc& sco%e, &urdles and met&ods
1!. Consumer 9e&avior'factors affectin( $uyer $e&avior, $uyer decision %rocess, consumer
%syc&olo(y, industrial $uyer $e&avior vs domestic $uyer $e&avior, customer satisfaction vscustomer deli(&t, consumer value and satisfaction
1. 6ealin( wit& com%etition' identification and analysis of com%etitors
14. 0arket se(mentation' $ases for market se(mentation of consumer (oods, industrial (oods and
services, 0arket tar(etin( and %ositionin( strate(ies
1/. 0arket evaluation and control' ty%es, %rocess, &urdles to marketin( control, marketin( audit
and marketin( et&ics
34
8/10/2019 ME Detailed
35/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
SEMESTER - +III
ME 901
Ad*anced eldin' Technolo'y
Conac !ours& 3
1 Review of weldin( %rocesses, Goint desi(n
) "rocess descri%tions of and %arametric influences on fusion weldin(; arc weldin(' #0>,
stud arc weldin(, E0>, E+> and FC>, solid state weldin( %rocesses' %ressure
weldin(, friction weldin(, diffusion weldin(; resistance weldin( %rocesses.
3 rc weldin(' different ty%es of eui%ment, %ower sources, arc c&aracteristics, electrode
selection.
# Critical and %recision weldin( %rocesses like: ">, L9>, 39>, , friction stir
weldin(, under'water weldin(. >eldin( of %lastics, ceramics and com%osites.
7 >eldin( metallur(y, HM, effects of different %rocess %arameters on t&e c&aracteristics ofweldment.
>eldin( fitures, weldin( automation and ro$otic a%%lications
" >elda$ility of %lain car$on steels, stainless steel, cast iron, aluminium and its alloys.
8 >eldin( defects' ty%es, causes, ins%ection and remedial measures; testin( of welded Goints $y
visual ins%ection, dye'%enetration @6"A test, ultrasonics and radio(ra%&y.
#afe "ractices in >eldin(.
Te: and Re(erence $oo%s&
1. 5.". =&anna, +et 9ook of >eldin( +ec&nolo(y, 6&an%at Rai - #ons.
!. R.#. "armar, >eldin( 3n(ineerin( and +ec&nolo(y, =&anna "u$lis&ers.. 0. 9&attac&aryya, >eldment 6esi(n, +&e ssociation of 3n(ineers, India "u$lication, =olkata.
4. 2.C. Li%%old and 6.2. =otecki, >eldin( 0etallur(y and >elda$ility of #tainless #teels, >iley'
India @"A Ltd., ?ew
/. 6el&i.
. ulf, >eldin( for 3n(ineers, 2o&n >iley and #ons.
7. 2.L. 0orris, >eldin( "rocess and "rocedures.
8. #.*. ?adkarni, 0odern rc >eldin( +ec&nolo(y, 5ford - I9H "u$lis&in( Co. "vt. Ltd.
dvani'5erlikon Ltd.
35
8/10/2019 ME Detailed
36/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
ME,CS991 . NET Theory 4 /racice
Conac& #
>&at is .?et Framework
>&at ty%e of a%%lications can $e develo%ed usin( .net
=ey features of .net
>&at is CLR
Eeneral comments on CQ #ynta
*aria$les
Conditional #tatement , Iterations
indo2s Applicaion &
0odule 1: 9uildin( a
8/10/2019 ME Detailed
37/51
8/10/2019 ME Detailed
38/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
"lant: location, layout, material &andlin(, eui%ment selection, maintenance of eui%ment and
facilities; "rocesses: 2o$, $atc& and flow %roduction met&ods, Erou% +ec&nolo(y >ork study and
+ime and 0otion study, >orkGo$ evaluation, uality control @#"CA, control c&arts;Resource %lannin(: %roduction o%eration control, forecastin(, ca%acity mana(ement, sc&edulin( and
loadin(, line $alancin(, $reak'even analysis, inventory of materials and t&eir control, manufacturin(
%lannin(, 0R" ' II, 2I+.
References :
1. "roduction, "lannin( and Inventory Control $y #.L.?arasim&an, 6.>.0cLeavey, ".2.9illin(ton,
"rentice Hall.
!. "roduction #ystems: "lannin(, nalysis and Control $y 2.L.Ri((s, rd ed., >iley.
. "roductions and 5%erations 0ana(ement $y .0u&lemann, 2.5akland and =.Lockyer, 0acmillan.
ME 903,$ & Indusrial En'ineerin' /racice
Conacs & 3/
3%eriments and com%utational work involvin( %roduction %lannin( and sc&edulin(, %rocess
%lannin(, resource allocation, mac&ine loadin( and o%timiation;
"lant facility layout models, mec&anical, electro'analo(ue models for o%timal %lant facility location
analysis, analo(ue and com%uter aided models for %&ysical %at& analysis of %roduction
%ro(ram%roGect activity;
?etwork analysis and o%timiation; %roduct uality %lannin( and control analysis models; %roduction
system simulation, simulated system in maintenance %ro(rams, system dynamics, com%uter
a%%lications in Industrial 3n(ineerin(.
ME 9) & Compuer Ine'raed Manu(acurin'
Conac & 3
Conce%t of Com%uter Inte(rated 0anufacturin( @CI0A; 9asic com%onents of CI0; 6istri$uted
data$ase system; distri$uted communication system, com%uter networks for manufacturin(; future
automated factory; social and economic factors.
Com%uter ided 6esi(n @C6A: C6 &ardware and software; %roduct modellin(, automatic draftin(;
en(ineerin( analysis; F30 desi(n review and evaluation; Erou% +ec&nolo(y Centre.
Com%uter ided 0anufacturin( @C0A: Com%uter assisted ?C %art %ro(rammin(; Com%uter assisted
ro$ot %ro(rammin(; com%uter aided %rocess %lannin( @C""A; com%uter aided material reuirements
%lannin( @0R"A; com%uter aided %roduction sc&edulin(; com%uter aided ins%ection %lannin(;
com%uter aided inventory %lannin(; flei$le manufacturin( system @F0#A; conce%t of flei$le
manufacturin(; Inte(ratin( ?C mac&ines, ro$ots, E*s, and ot&er ?C eui%ment; Com%uter aided
uality control; $usiness functions, com%uter aided forecastin(.0ana(ement Information #ystems @0I#A, *arious CI0 systems ' eam%les.
38
8/10/2019 ME Detailed
39/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
References :
1. C6, C0, CI0 $y ".Rad&akris&nan and #.#u$ramanyan, ?ew (e International "u$lis&ers.!. Com%uter Inte(rated 0anufacturin( $y "aul E. Rankey, "rentice Hall.
. Com%uter Inte(rated 0anufacturin( $y Harrin(ton 2. 2r., Industrial "ress, Inc., ?ew Dork.
4. Com%uter Inte(rated 0anufacturin( $y =.Rat&mill and ".0acconal, IF# "u$lications.
/. utomation, "roduction #ystems and Com%uter Inte(rated 0anufacturin( $y 0. ". Eroover,
"rentice Hall.
!5 911 & ,i Toal Fualiy Mana'emen and Ri'h o In(ormaion Ac>
,iii Economics and $usiness Analyics
Conacs &
Toal Fualiy Mana'emen
1A Introduction' uality defined, +0 models, %otential $enefits of +0, evolution of +0
!A Conce%t and %&iloso%&y ) traditional mana(ement and +0, &istory of +30 in 2a%an,
mericas 3uro%e and ot&er develo%in( nations, +0 in service sector
A 3ssentials of +0' customer satisfactions, +0 leaders&i%, uality %olicy and mission
statement, trainin( for +0, su%%lier selection, em%loyee and mana(ement involvement,
uality circles, reco(nition and reward
4A International contri$utions to +0 ' >. 3dward 6emin(, 2ose%& 0 2uran, "&illi% 9 Cross$y,rmand * Fei(en$aum, Ric&ard #c&on$er(er, Eenic&i +a(uc&i, 0asaki ImaG
/A +0 and %roductivity and im%lementation
Ri'h o In(ormaion Ac
A Eeneral overview of Ri(&t to Information ct
7A 3%lanations, evolution, %&iloso%&y, im%ortance and conce%ts
8A #alient features of R+I ct
A "u$lic aut&ority and o$li(ation under R+I act
1A >&at is %u$lic aut&ority
11A >&o are covered and eem%t
1!A 5$li(ation of aut&orities
1A Role of %u$lic information 5fficers14A Reuirement, desi(nation, role and res%onsi$ilities of "I5s "I5s
39
8/10/2019 ME Detailed
40/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
1/A Erounds of acce%tance, time limit and %rocess of dis%osal of reuests
1A Fees and costs of %rovidin( information
17A "artial disclosure and Ot&ird %arty informationP18A Information Commission, %ower and functions
1A Role and res%onsi$ilities
!A "rovisions of R+I act in relation to com%laints and s%ecifications
!1A "ower of information commission and mandate
!!A #econd %%eal %rocess
!A R+I and (ood (overnance
!4A Role of civil society or(aniation
!/A Records and mana(ement information system
Economics
!A 0eanin( and sco%e of economics, mana(erial economics
!7A +&eory of 6emand and #u%%ly' laws, functions and elasticity
!8A +&eory of "roduction' law, factors, #&ort and lon( run
!A Revenue and Cost conce%ts' *aria$le, fied, unit, controlla$le, uncontrolla$le, sunk and
o%%ortunity costs, cost curves, decision makin( costs and 9reak 3ven analysis
A 0arket structures' ty%es of markets, %ricin( models under mono%olistic, %erfect, oli(o%olistic
market com%etitions
$usiness Analyics
1A Financial statement analysis
!A 3stimatin( discount rates, (rowt& rates and cas& flows
A %%roac& to valuation and identifyin( value drivers4A *aluation usin( multi%les
/A #trate(y'finance'valuation trilo(y
A Real o%tions and $rand valuations
7A 9usiness %erformance mana(ement
8A =ey %erformance indicators and o%erational metrics
A 9alanced scorecard
4A #i si(ma
41A 6as&$oards
4!A 6ata visualiation
4A 6ata minin(' neural networks, cluster analysis, tet minin(, we$ minin(
44A Re%ort desi(n and develo%ment
4/A 9usiness Intelli(ence' emer(in( trends and tec&niues
Re(erred readin'&-
1! $ana#erial Economics b& 6ohn +ean
0! $icro Economics b& R&an earce
7! usiness 5nal&tics b& 6ames R Evans
8! usiness 5nal&tics for $ana#ers b& ert .!4! 9auren and 6esper ,horland
:! ,otal ualit& $ana#ement b& R!!$ohant& and R!R!9akhe
8/10/2019 ME Detailed
41/51
8/10/2019 ME Detailed
42/51
8/10/2019 ME Detailed
43/51
8/10/2019 ME Detailed
44/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
6efinition of services, 6istinction $etween #aa# and "aa# @knowled(e of #alesforce.com and
Force.comA, %%lication develo%ment.
e$, ((re(ation and
disintermediation, "roductivity a%%lications and service, dwords, Eoo(le nalytics, Eoo(le
+ranslate, a $rief discussion on Eoo(le +oolkit @includin( introduction of Eoo(le "Is in $riefA,
maGor features of Eoo(le %% 3n(ine service.
4. 5se o( Amaon eb Ser*ices
maon >e$ #ervice com%onents and services: maon 3lastic Cloud, maon #im%le #tora(e
system, maon 3lastic 9lock #tore, maon #im%le69 and Relational 6ata$ase #ervice
/. 5se o( Microso( Cloud Ser*ices &>indows ure %latform: 0icrosoftBs a%%roac&, arc&itecture,
and main elements, overview of >indows ure %%Fa$ric, Content 6elivery ?etwork, #L ure,
and >indows Live services
.aa in he cloud& Relational data$ases, Cloud file systems: EF# and H6F#, 9i(+a$le, H9ase
and 6ynamo.
Module III& Cloud In(rasrucure ,ecures& 7
+y%es of services reuired in im%lementation ) Consultin(, Confi(uration, Customiation and
#u%%ort.
1. Cloud Mana'emen
n overview of t&e features of network mana(ement systems and a $rief introduction of related
%roducts from lar(e cloud vendors, 0onitorin( of an entire cloud com%utin( de%loyment stack ) an
overview wit& mention of some %roducts.
Lifecycle mana(ement of cloud services @si sta(es of lifecycleA.
). Conceps o( Cloud Securiy
Cloud security concerns, #ecurity $oundary, #ecurity service $oundary
5verview of security ma%%in(
#ecurity of data: 9rokered cloud stora(e access, #tora(e location and tenancy, encry%tion, and
auditin( and com%lianceIdentity mana(ement @awareness of Identity %rotocol standardsA
Module I+& Conceps o( Ser*ices and Applicaions ,ecures& 8
1. Ser*ice
8/10/2019 ME Detailed
45/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
#. ebmail Ser*ices& Cloud mail services includin( Eoo(le Email, 0ail!>e$, >indows Live
Hotmail, Da&oo mail, conce%ts of #yndication services.
$oo%s Recommended:
1. Cloud Com%utin( 9i$le $y 9arrie #osinsky, >iley India "vt. Ltd, !1
!. 0asterin( Cloud Com%utin( $y RaGkumar 9uyya, C&ristian *ecc&iola, #. +&amarai #elvi, 0cEraw
Hill 3ducation
@IndiaA "rivate Limited, !1
. Cloud com%utin(: %ractical a%%roac&, nt&ony +. *elte, +ata 0c(raw'Hill
4. Cloud Com%utin(, 0iller, "earson
Re(erences:
1. Cloud Com%utin( ) #econd 3dition $y 6r. =umar #aura$&, >iley India
!. Eoo(le %%s $y #cott Eranneman,"earson.
ME,CS993 Mulimedia Technolo'y
Conac
Inroducion @)
0ultimedia today, Im%act of 0ultimedia, 0ultimedia #ystems, Com%onents and Its %%lications
Te: and Audio @"
45
8/10/2019 ME Detailed
46/51
8/10/2019 ME Detailed
47/51
8/10/2019 ME Detailed
48/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
. *elocity and cceleration analysis @mec&anisms u%to linksA $y 3uivalent met&od
@Era%&ical or analytical %%roac&A.
#. 6le:ible Connecors&4.1 9elt ) +y%es of $elts, velocity ratio, sli%, len(t& of $elt.
4.! C&ains ) ty%es of c&ains, c&ordal action, variation in velocity ratio, c&ain len(t&.
7. ?ears
/.1 Law of (earin(.
/.! ConGu(ate %rofile and its (ra%&ic construction.
/. Involute and Cycloid (ear toot& %rofile.
/.4 Construction of Involute %rofile.
/./ "at& of contact, arc of contact, contact ratio for involutes and cycloid toot& %rofile.
/. Interference in involutes (ears. Critical ?um$ers of teet& for interference free motion.
/.7 0et&ods to control interference in involutes (ears.
?ear Trains
=inematics and dynamic analysis of ' sim%le (ear trains, com%ound (ear trains, Reverted (ear
trains, 3%icyclic (ear trains wit& #%ur or 9evel (ear com$ination.
". Cam Mechanisms&
.1 Cam and its Classifications.
.! Followers and its Classification.
. 0otion analysis and %lottin( of dis%lacement'time, velocity'time, acceleration' time, Gerk'
time (ra%&s for uniform velocity.
8/10/2019 ME Detailed
49/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
" Com%uter aided %roduction %lannin( and control, 0anufacturin( from %roduct desi(n'
C6C0 interface, conce%t of (rou% tec&nolo(y @E+A, C""
8 Control systems, "rocess monitorin(, da%tive control systems, etc.,9 utomatic ins%ection systems, use of C00, Reverse 3n(ineerin(
Re(erences&
1. ".?. Rao, ?.=. +ewari and +.=. =undra, Com%uter ided 0anufacturin(, +ata 0cEraw'Hill
"u$lication.
!. 0.". Eroover and 3.>. Mimmers 2r., C6C0, "rentice Hall of India
. ". Rad&akris&nan, #. #u$ramanyan and *. RaGu, C6C0CI0, ?ew (e International
"u$lis&ers.
4. ".?. Rao, C6C0, +ata 0cEraw Hill "u$lication.
/. 0.". Eroover, utomation, "roduction #ystems, and Com%uter'Inte(rated 0anufacturin(,
"rentice Hall of India.
. I. Meid, C6C0 ' +&eory and "ractice, +ata 0cEraw'Hill "u$lis&in( Co. Ltd., ?ew
6el&i.
7. #.R. 6e$, Ro$otics +ec&nolo(y and Flei$le utomation, +ata 0cEraw'Hill "u$lication.
8. #.=. #a&a, Introduction to Ro$otics, +&e 0cEraw'Hill "u$lication
. ".9. 0a&a%atra, Com%uter'ided "roduction 0ana(ement, "rentice Hall of India.
!5 "11 ,i /roducion 4
8/10/2019 ME Detailed
50/51
Syllabus for B.Tech (Mechanical Engineering) up to Fourth year
University of Engineering and Management !aipur
A 9asic tools in %roduction and o%eration mana(ement
Relevant cost conce%ts' fied, varia$le, o%%ortunity sunk, direct, indirect, over&ead,
controlla$le and uncontrolla$le costs Ca%ital 9ud(etin(' identifyin( investment o%%ortunities and mutually eclusive %roGects,
Ca%ital rationin( and risk consideration in %roGect a%%raisals
ueuin( +&eory' features, desi(n, ty%es of ueuin( system, analysis, sin(le service and
multi%le c&annel sin(le service ueuin( system
Forecastin(' 6efinition, elements and met&ods of forecastin(' time series, multi%le
re(ression model, in%ut'out%ut analysis, life'cycle analysis, 6el%&i met&od of o%inion
(at&erin(, end'user analysis and market survey , %rereuisites and %itfalls in forecastin(,
ran(e and %recision of forecastin(, forecastin( in Indian scenario
4A uality 0ana(ement'uality as cor%orate strate(y, statistical met&ods, control c&arts,
acce%tance sam%lin(, avera(e out(oin( uality limit, mana(in( and cost of uality; #i
#i(ma, +a(uc&i %&iloso%&y, =aien met&od, Is&ikawa dia(ram, service uality, roadma% for+0
/A "roduct 6esi(n' %ur%ose, or(aniational com%etitiveness and desi(n for manufacturers
@6F0A
A 0aintenance mana(ement' o$Gective, availa$ility; im%ortance of statistics of failure,
%reventive maintenance, work study and man%ower %lannin(, &andlin( s%are %arts,
codification of s%ares, ca%ital s%ares, insurance s%ares and rota$le s%ares
7A >ork study, Go$ evaluation and incentive sc&emes
8A 0aterial mana(ement ' %urc&asin( function, value analysis, vendor relations, %rice
forecastin(, forward $uyin( and ne(otiations, 3conomic order uantity @35A, 9C analysis,
*36 analysis, and t&eir com%arison, material reuirement %lannin( @0R"A and calculations
A #u%%ly c&ain mana(ement' core com%etency, su%%ly c&ain and O=eiretsuP, $uildin( su%%ly
c&ain, orientation and its im%lementation,, sin(le source and multi%le source1A "roduction %lannin( and control' definition, a((re(ate %lannin( strate(ies and costs,
sc&edulin(, Gust'in'time %roduction @2I+A, difference $etween 2I+ and 0R", =an'$an
%roduction information system, Do'i'don and standardiation, %roGect mana(ement' critical
%at&, time analysis, "3R+C"0 and %rocedure networkin(
$eha*ioral Sciences
11A 5r(aniational 9e&avior
>&at do mana(ers do
"erceived notion versus su$stantive evidence
Few a$solutes in 5r(aniational 9e&avior
Res%onsiveness to (lo$aliation
0ana(in( workforce diversity
Im%rovin( uality and service
Co%in( wit& Otem%orarinessP
3m%owerin( %eo%le
#imulatin( innovation and c&an(e
>ork life conflicts
Im%rovin( et&ical $e&avior
1!A Individualism
1A *alue, attitude and Go$ satisfaction' consistency, co(nitive and dissonance t&eory, measurin(
'9 relations&i%s, measurin( satisfaction, myt& or science' OHa%%y workers are %roductiveworkersP
50
8/10/2019 ME Detailed
51/51