MC INJECTIONRELIABLE & DURABLE

The name MC is a synonym for sophisticated technical products and competentservice for building owners, engineers and applicators. With its profoundtechnical expertise our internal R & D department is continuously developingand enhancing our product portfolio.

MC Injection Technologies System

P R O D U C T & E Q U I P M E N TP R O D U C T & E Q U I P M E N T

-

PropertiesMC Injekt1264 KF-TR

MC Injekt2033

MC Injekt2300NV

MC Injekt2300 Plus

MC Injekt2700 L

MC Injekt2700 UW

MC InjektGL 93

MC InjektGL 95 TR

MC InjektGL 95 TX-TRUnit

Resin Duromer Elastomer Elastomer Elastomer Elastomer Elastomer Hydro-Structural Hydro-Structural Hydro-Structural

Density g/m3 1.07 1.13 1.05 1.043 1.13 1.13 1.1 1.1 1.1

555250250 ± 5090100250220mPasViscosity approx.

Mixing Ratio -3.9 : 1 (p.b.v.)5 : 1 (p.b.w.)

5 : 1 up to 10:1 (p.b.v.) 3 : 1 (p.b.v.)100 : 42 (p.b.w)

1 : 1 (p.b.v.)100 : 111 (p.b.w)

1 : 1 (p.b.v) 1 : 1 (p.b.v) A : B = 1:1 (p.b.v.) A : B = 1:1 (p.b.v.) A : B = 1:1 (p.b.v.)

Pot Lifeat 20°C, 50% relativehumidity

80 min- 100 min 35 min 45 min

6 -8 hrs(Reaction time

approx. 40 - 60 secwhen in contact

with water)

approx. 43 sec(can be

accelerated withMC Injekt 2700

UW KAT, MC-Injekt2700 UW TIX)

approx. 9 - 180 sec(Depending on

initiatorconcentration)

1-11 min(Depending on

initiatorconcentration)

38 sec-15 min(Depending on

initiatorconcentration)

Compressive Strength N/mm2 70 - - - approx. 40 approx. 90 - - -

Increase in Volumewith 5% water withoutcounter pressure

NA 40 times 10 - 20% 10 - 20% 2 - 3 times 8 times N/A N/A N/A

Equipment Cleaning MC Thinner EP MC Thinner PU MC Thinner PU MC Thinner PU MC Thinner PU MC Thinner PU Water Water Water

Packaging 1, 10 kg 1, 10 , 30 lit 1, 10 , 30 lit 1, 20 kg 25 kg 25 litA1: 120/25kg

A2: 4/1 kgA1: 120/30 kgA2: 2/0.5 kg

A1: 120/30 kgA2: 2/0.5 kg

Potable WaterApproval - - - -

Fulfills KTWrequirements of

test group D2(small area sealing)

Fulfills KTWrequirements of

test group D1(large area sealing)

Fulfills KTWrequirements of

test group C(mounting parts)

Fulfills KTWrequirements of

test group D1(large area sealing)

Fulfills KTWrequirements of

test group D1(large area sealing)

Fulfills KTWrequirements of

test group D1(large area sealing)

• Rigid filling of cracks, joints and

cavities instructural and civil

engineering underdry conditions.

• Filling of injection hoses.

• Temporary sealing of water bearing cracks before permanent sealing with MC-

elastomer resin.

• Stops water leakage.

• Filling of cavities.

• Sealing ofpotable water

structures in combination with MC-elastomer resin.

• Flexible sealingand filling of cracks,

joints and cavitiesin structural andcivil engineering

construction etc.under dry, water-bearing and high-pressure water-bearing conditions.

• Filling of injection pipes.

• Sealing of potable water structures.

•• Flexible sealingand filling of cracks,

joints and cavitiesin structural,

underground andcivil engineeringunder dry, water-bearing and high-pressure water-bearing conditions.

• Injection hoses.

• Sealing of potable water structures.

• Rigid sealing andfilling of joints,cracks, cavities in

undergroundenginering, water-and tunnelstructures, miningand general civil

engineering.

• Injection underwater carriedout by divers(in combination with MC-Injekt 2700 TIX).

• Waterproofing injection against

highly pressurised water, especially in combination with

MC-Injekt 2700 TIXor MC-Injekt 2700KAT.

• Sealing of sheetpilings, diaphragmwalls, installations,dams, etc.

• Strengthening ofsubsoil, excavations,

tunnels, dams, etc.

• Sealing injection cracks and cavities

in masonry and concrete.

• Supplementary exterior sealing of ground-connected structural parts through area-

measured ground-gelling.

• Sealing injection of joints, cracks and cavities in masonry and concrete.

• Supplementary exterior sealing of ground-connected structural parts through area-

measured ground-gelling.

• Sealing injection of joints, cracks and cavities in masonry and concrete.

• Sealing andbonding injectionof contact areasbetween plastic

sealing-strips and concrete.

• Supplementary exterior sealing of ground connected structural parts through area-

measured ground gelling.

•• Strong sealing and filling of cracks,

joints and cavitiesin structural

underground andcivil engineering

construction under dry, water-bearing conditions.

• Sealing andstabilising of cracks

and cavities inloose rock,mountain rock andsimilar areas.

• Sealing of sheet pilings, diaphragm walls and the like

on ground water levels.

• Sealing of leakagesin drinking water

structures, pipes, sockets, etc.

RecommendedApplicationAreas

MC-Bauchemie - Am Kruppwald 2-8 - D-46238 BottropTelefon : (0 20 41) 101- 600 Fax : (0 20 41) 101- 688

WAK Trading Pte Ltd12A, Sixth Avenue, Singapore 276475Tel : + 65 6462 0362Fax : + 65 6466 0205Email : sapurah@wakmc.comContact : Mr Willie Kay / HP : +65 9736 2583Contact : Mr Jesse Goh / HP : +65 9739 0505

MC Bauchemie (M) Sdn Bhd38-1 Jalan SS2/61, 47300 Petaling JayaSelangor Darul Ehsan, MalaysiaTel : + 60 3 7877 1232Fax : + 60 3 7877 0911Email : sylvia@mc-bauchemie.com.my

MC Bauchemie Taiwan Co, LtdNo. 14, Road 30, Taiching Industrial ParkTaichung, Taiwan. R.O.C.Tel : + 886 4 2355 0345Fax : + 886 4 2355 0349Email : msamct@ms78.hinet.net

Singapore Malaysia Taiwan

Building Chemical Supplies Pty LtdP.O.Box 401 GladstoneQueensland 4680AustraliaTel : + 617 4 979 3416Fax : + 617 4 979 3916Email : sales@buildingchemicalsupplies.com.au

Shanghai ATech Engineering & ServicesShanghai Garden Phase 1 Office,2nd Floor No. 7888 Humin RoadChinaTel : + 862 1 549 32125Fax : + 862 1 549 32128Email : poatech@sh163.net

Hop Shing Engineering & ConstructionCompany Ltd.Unit 902, No. 1 Hung To RoadKwun Tong, Kowloon, Hong KongTel : + 852 2570 3759Fax : + 852 2570 4329Email : mc@hopshingengineering.com

HRC IndonesiaRujum Puri Tirta 88 iPuri KencanaJakarta BaratIndonesiaTel : + 62 21 53 00 999 / 583 03 742Fax : + 62 21 58 06 134Email : hrc.boh@gmail.com

HRC Contracts (M) Sdn Bhd1643A, Jalan Sri Putri 4/2Taman Putri Kulai81000 KulaiJohor, MalaysiaTel : + 60 7 663 8963 / 6963Fax : + 60 7 663 1358Email : hrcmal@pd.jaring.my

Metro-Chemie Resources Sdn BhdNo. 11A, Jalan TPK, 2/6 Section 2Taman Perindustrian Kinrara47100 Puchong, Selangor,MalaysiaTel : + 60 3 8070 4833Fax : + 60 3 8070 5833Email : metrolab@myjaring.net

Buidling Chemical Supplies LtdP.O.Box 27 397WellingtonNew ZealandTel : + 64 385 0164Fax : + 64 381 4952Email : b.c.s@xtra.co.nz

New Technical Water Proofing Service& Rehabilitation (P) LtdKupandole, Sanepa RoadG.P.O Box No. 20363, Lalitpur, NepalTel : + 977 1 5 545 242Fax : + 977 1 5 531 515Email : ntwps@Wlink.com.np

BCS Prokon Pte Ltd53 Ubi Avenue 1#03-28 Paya Ubi Industrial ParkSingapore 408934Tel : + 65 6744 5841Fax : + 65 6841 0632Email : bcswp@singnet.com.sg

HRC Harvest Resources Pte LtdBlk 3016, Bedok North Ave 4#08-28 EASTechSingapore 489947Tel : + 65 6441 8878Fax : + 65 6441 5667Email : hrc.boh@gmail.com

VSL Singapore Pte Ltd25 Senoko WaySingapore 758047Tel : + 65 6559 1203Fax : + 65 6559 1288Email : a_desilva@vsl-sg.com

Groupmech Corporation Ltd99/101 - 102 Soi Mamin Condo,Sihaburanukit Rd, MinburiBangkok 10510 , ThailandTel : + 66 2 9188 990Fax : + 66 2 5177 487Email : gmech@samart.co.th

VSL (Thailand) Co., Ltd5th Floor, Sarasin Building14 Surasak Road,Silom BangrakBangkok 10500, ThailandTel : + 66 2 237 3288 90Fax : + 66 2 238 2448Email : sombat_s@vsl-th.com

Hydroseal Enterprise Co., Ltd4th Floor, No. 13Lane 149, Sector 4Mu-Cha RoadTaipei, TaiwanTel : + 886 222 39 0262Fax : + 886 222 39 0272Email : hydronet@tpts6.seed.net.tw

Australia - Queensland China Hong Kong, Macau & South China

Indonesia Malaysia Malaysia

Nepal New Zealand Singapore

Singapore Singapore Thailand

Thailand Taiwan

MC INJECTION TEAM MANAGEMENT

IRP TRAINED APPLICATORS