Mazda6 8W89-EA-06K Edition1 - Mazda CanadaBefore Driving Your Mazda Important information about driving your Mazda. 4 Driving Your Mazda Explanation of instruments and controls. 5

Black plate (1,1)

Mazda6_8W89-EA-06K_Edition1 Page1Tuesday, November 14 2006 1:22 PM

Form No.8W89-EA-06K

Black plate (2,1)


Form No.8W89-EA-06K

Black plate (3,1)

Thank you for choosing a Mazda. We at Mazda design and build vehicles with completecustomer satisfaction in mind.

To help ensure enjoyable and trouble-free operation of your Mazda, read this manualcarefully and follow its recommendations.

An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service isnecessary, that's the place to go.

Our nationwide network of Mazda professionals is dedicated to providing you with the bestpossible service.

We assure you that all of us at Mazda have an ongoing interest in your motoring pleasureand in your full satisfaction with your Mazda product.

Mazda North American Operations

Important Notes About This ManualKeep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should youresell the vehicle, leave this manual with it for the next owner.

All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal atMazda, we reserve the right to make changes in specifications at any time without notice and without obligation.

Event Data RecorderThis vehicle is equipped with an event data recorder. In the event of a crash, this device records data related tovehicle dynamics and safety systems for a short period of time. These data can help provide a betterunderstanding of the circumstances in which crashes and injuries occur and lead to the designing of safervehicles.

Air Conditioning and the EnvironmentYour Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not todamage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized MazdaDealer.

PerchlorateCertain components of this vehicle such as [air bag modules, seat belt pretensioners, lithium batteries, ...] maycontain Perchlorate Material– Special handling may apply for service or vehicle end of life disposal. Seewww.dtsc.ca.gov/hazardouswaste/perchlorate.

Please be aware that this manual applies to all models, equipment and options. As a result, you may findsome explanations for equipment not installed on your vehicle.

©2006 Mazda North American OperationsPrinted in U.S.A. (Print1)

AWord to Mazda Owners


Form No.8W89-EA-06K

Black plate (4,1)

We want to help you get the most drivingpleasure from your vehicle. Your owner'smanual, when read from cover to cover,can do that in many ways.

Illustrations complement the words of themanual to best explain how to enjoy yourMazda. By reading your manual, you canfind out about the features, importantsafety information, and driving undervarious road conditions.

The symbol below in this manual means“Do not do this” or “Do not let thishappen”.

Index: A good place to start is the Index,an alphabetical listing of all informationin your manual.

You'll find several WARNINGs,CAUTIONs, and NOTEs in the manual.

WARNINGAWARNING indicates a situation inwhich serious injury or death couldresult if the warning is ignored.

CAUTIONA CAUTION indicates a situation inwhich bodily injury or damage to yourvehicle, or both, could result if thecaution is ignored.

NOTE

A NOTE provides information andsometimes suggests how to make betteruse of your vehicle.

The symbol below, located on some partsof the vehicle, indicates that this manualcontains information related to the part.Please refer to the manual for a detailedexplanation.

How to Use This Manual


Form No.8W89-EA-06K

Black plate (5,1)


Form No.8W89-EA-06K

Table of Contents

Your Vehicle at a GlanceInterior, exterior views and part identification of your Mazda.

1

Essential Safety EquipmentUse of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.

2

Knowing Your MazdaExplanation of basic operations and controls; opening/closing and adjustmentof various parts.

3

Before Driving Your MazdaImportant information about driving your Mazda.

4

Driving Your MazdaExplanation of instruments and controls.

5

Interior ComfortUse of various features for drive comfort, including air-conditioning and audiosystem.

6

In Case of an EmergencyHelpful information on what to do in an emergency.

7

Maintenance and CareHow to keep your Mazda in top condition.

8

Customer Information and Reporting Safety DefectsImportant consumer information including warranties and add-on equipment.

9

SpecificationsTechnical information about your Mazda.

10

Index 11

Navigation System

Black plate (6,1)


Form No.8W89-EA-06K

Black plate (7,1)

1 Your Vehicle at a Glance

Interior, exterior views and part identification of your Mazda.

Dashboard and Interior Overview .............................................. 1-2

Exterior Overview ......................................................................... 1-4

1-1


Form No.8W89-EA-06K

Black plate (8,1)

The equipment and installation position varies by model.*Refer to Navigation System at the end of the manual (if equipped).

Power window lock switch ................................................................................ page 3-28Power window switches .................................................................................... page 3-24Power door lock switch ..................................................................................... page 3-10

1-2

Your Vehicle at a Glance

Dashboard and Interior Overview


Form No.8W89-EA-06K

Black plate (9,1)

Headlight leveling switch .................................................................................. page 5-41Dashboard illumination ..................................................................................... page 5-27TCS-OFF switch ................................................................................................ page 5-22Lighting control/Turn signals ............................................................................ page 5-40Audio control switch ......................................................................................... page 6-45Instrument cluster .............................................................................................. page 5-24Air bags ............................................................................................................. page 2-46Wiper and washer lever ..................................................................................... page 5-43Cruise control switches ...................................................................................... page 5-18Information display ............................................................................................ page 6-52Hazard warning flasher switch .......................................................................... page 5-46Audio system ..................................................................................................... page 6-16Glove box .......................................................................................................... page 6-57Center console ................................................................................................... page 6-57Accessory socket ............................................................................................... page 6-59Cup holder ......................................................................................................... page 6-54Parking brake ....................................................................................................... page 5-5MT shift lever ...................................................................................................... page 5-9AT shift lever (Sport AT) ................................................................................... page 5-11Climate control system ........................................................................................ page 6-2Ignition switch ..................................................................................................... page 5-2Steering column release lever ............................................................................ page 3-40Remote fuel-filler lid release ............................................................................. page 3-31Trunk release button .......................................................................................... page 3-20Hood release handle .......................................................................................... page 3-32Storage pocket ................................................................................................... page 6-56Outside mirror switch ........................................................................................ page 3-40Interior light ....................................................................................................... page 6-49Sunvisor ............................................................................................................. page 6-49Map light ........................................................................................................... page 6-50Rearview mirror ................................................................................................. page 3-41Vanity mirror ...................................................................................................... page 6-49Front seats ............................................................................................................ page 2-2Seat belt ............................................................................................................. page 2-16Rear seat .............................................................................................................. page 2-9


Dashboard and Interior Overview

1-3


Form No.8W89-EA-06K

Black plate (10,1)

The equipment and installation position varies by model.

Sedan/5-Door

1-4


Exterior Overview


Form No.8W89-EA-06K

Black plate (11,1)

Trunk lid ............................................................................................................ page 3-20Hatch ................................................................................................................. page 3-12Antenna ............................................................................................................. page 6-16Rear window defroster ....................................................................................... page 5-45Power windows ................................................................................................. page 3-23Tires ................................................................................................................... page 8-34Light bulbs ......................................................................................................... page 8-39Hood .................................................................................................................. page 3-32Windshield wiper blades .................................................................................... page 8-28Moonroof ........................................................................................................... page 3-33Child safety locks .............................................................................................. page 3-11Fuel-filler lid ...................................................................................................... page 3-30Doors and keys .................................................................................................... page 3-9Outside mirror .................................................................................................... page 3-40


Exterior Overview

1-5


Form No.8W89-EA-06K

Black plate (12,1)

The equipment and installation position varies by model.

Sport Wagon

1-6


Exterior Overview


Form No.8W89-EA-06K

Black plate (13,1)

Liftgate .............................................................................................................. page 3-14Antenna ............................................................................................................. page 6-16Rear window defroster ....................................................................................... page 5-45Power windows ................................................................................................. page 3-23Tires ................................................................................................................... page 8-34Light bulbs ......................................................................................................... page 8-39Hood .................................................................................................................. page 3-32Windshield wiper blades .................................................................................... page 8-28Moonroof ........................................................................................................... page 3-33Child safety locks .............................................................................................. page 3-11Fuel-filler lid ...................................................................................................... page 3-30Doors and keys .................................................................................................... page 3-9Outside mirror .................................................................................................... page 3-40


Exterior Overview

1-7


Form No.8W89-EA-06K

Black plate (14,1)

1-8


Form No.8W89-EA-06K

Black plate (15,1)

2 Essential Safety Equipment

Use of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.

Seats ............................................................................................... 2-2Front Seats (Manually Operated Seats) ..................................... 2-2Front Seats (Electrically Operated Seats) .................................. 2-5Rear Seat ................................................................................... 2-9

Seat Belt Systems ........................................................................ 2-16Seat Belt Precautions .............................................................. 2-16Seat Belt (Except Center-Rear Position) ................................. 2-19Front Seat Belt Pretensioner and Load Limiting Systems ....... 2-21Center-Rear Position Seat Belt ................................................ 2-23Seat Belt Extender ................................................................... 2-26Seat Belt Warning Light/Beep ................................................ 2-27

Child Restraint ............................................................................ 2-29Child Restraint Precautions ..................................................... 2-29Installing Child-Restraint Systems .......................................... 2-33LATCH Child-Restraint Systems ............................................ 2-41

SRS Air Bags ............................................................................... 2-46Supplemental Restraint Systems (SRS) Precautions ............... 2-46Supplemental Restraint System Components ......................... 2-50How the Air Bags Work .......................................................... 2-53

2-1


Form No.8W89-EA-06K

Black plate (16,1)

Front Seats (ManuallyOperated Seats)

WARNINGDo not modify or replace the frontseats:Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodifications could damage thesupplemental restraint system andresult in serious injury. Consult anAuthorized Mazda Dealer if there isany need to remove or reinstall thefront seats.

Do not drive with damaged front seats:Driving with damaged front seats isdangerous. A collision, even one notstrong enough to inflate the air bags,could damage the front seats whichcontain essential air bag components.If there was a subsequent collision, anair bag may not deploy which couldlead to injuries. Always have anAuthorized Mazda Dealer inspect thefront seats, front seat beltpretensioners and air bags after acollision.

WARNINGMake sure the adjustable componentsof a seat are locked in place:Adjustable seats and seatbacks thatare not securely locked are dangerous.In a sudden stop or collision, the seator seatback could move, causinginjury. Make sure the adjustablecomponents of the seat are locked inplace by attempting to slide the seatforward and backward and rockingthe seatback.

qSeat Slide

WARNINGAdjust the driver seat only when thevehicle is stopped:Adjusting the driver's seat while thevehicle is moving is dangerous. Thedriver could lose control of the vehicleand have an accident.

To move a seat forward or backward, raisethe lever and slide the seat to the desiredposition and release the lever.

2-2

Essential Safety Equipment

Seats


Form No.8W89-EA-06K

Black plate (17,1)

Make sure the lever returns to its originalposition and the seat is locked in place byattempting to push it forward andbackward.

qSeat Recline

WARNINGDo not drive with the seats reclined:Sitting in a reclined position while thevehicle is moving is dangerousbecause you don't get the fullprotection from seat belts. Duringsudden braking or a collision, you canslide under the lap belt and sufferserious internal injuries. Formaximum protection, sit well back andupright.

Always sit in a passenger seat properlywith the seatback upright and feet onthe floor:If your vehicle is equipped with frontpassenger seat weight sensors, sittingin the front passenger seat improperlyout of position or with the seatbackreclined too far while the vehicle ismoving is dangerous as it can take offweight from the seat bottom and affectthe weight determination of the frontpassenger sensing system. As a resultthe front passenger will not have thesupplementary protection of the airbag and seat belt pretensioner, whichcould cause result in serious injury.Always sit upright against yourseatback, with your feet on the floor.

WARNINGDo not drive with the seatbackunlocked:The seatback plays an important rolein your protection in a vehicle.Leaving the seatback unlocked isdangerous as it can allow passengersto be ejected or thrown around andbaggage to strike occupants in asudden stop or collision, resulting insevere injury. After adjusting theseatback at any time, even when thereare no other passengers, rock theseatback to make sure it is locked inplace.

To change the seatback angle, leanforward slightly while raising the lever.Then lean back to the desired position andrelease the lever.

Make sure the lever returns to its originalposition and the seatback is locked inplace by attempting to push it forward andbackward.


Seats

2-3


Form No.8W89-EA-06K

Black plate (18,1)

CAUTIONWhen returning a rear-reclined seatbackto its upright position, make sure youhold onto the seatback with your otherhand while operating the lever. If theseatback is not supported, it will flipforward suddenly and could causeinjury.

qHeight Adjustment (Driver's Seat)

By moving the seat lever up or down, theseat bottom height can be adjusted.

Down

Up

qHead Restraint

WARNINGAlways drive with the head restraintsinstalled when seats are being usedand make sure they are properlyadjusted:Driving with the head restraintsadjusted too low or removed isdangerous. With no support behindyour head, your neck could beseriously injured in a collision.

Height adjustment

To raise a head restraint, pull it up to thedesired position.To lower the head restraint, press the stop-catch release, then push the head restraintdown.

Adjust the head restraint so that the top iseven with the top of the passenger's ears,never the passenger's neck.

qSeat Warmerí

The front seats are electrically heated. Theignition switch must be in the ONposition.

Press the switch to turn the seat warmeron or off. When the switch is in the ONposition, the indicator light will come on.

ON

OFF

2-4


íSome models.

Seats


Form No.8W89-EA-06K

Black plate (19,1)

NOTE

The seat temperature is regulatedautomatically by a thermostat. Otherthan turning it on or off, it cannot beadjusted.

Front Seats (ElectricallyOperated Seats)

WARNINGDo not modify or replace the frontseats:Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodifications could damage thesupplemental restraint system andresult in serious injury. Consult anAuthorized Mazda Dealer if there isany need to remove or reinstall thefront seats.

Do not drive with damaged front seats:Driving with damaged front seats isdangerous. A collision, even one notstrong enough to inflate the air bags,could damage the front seats whichcontain essential air bag components.If there was a subsequent collision, anair bag may not deploy which couldlead to injuries. Always have anAuthorized Mazda Dealer inspect thefront seats, front seat beltpretensioners and air bags after acollision.


Seats

2-5


Form No.8W89-EA-06K

Black plate (20,1)

CAUTIONl The seat-bottom power adjustment isoperated by motors. Avoid extendedoperation because excessive use candamage the motors.

l To prevent the battery from runningdown, avoid using the poweradjustment when the engine isstopped. The adjuster uses a largeamount of electrical power.

l Don't use the switch to make morethan one adjustment at a time.

qSeat Slide (Driver's Seat)

To slide the seat, move the slide lifterswitch on the outside of the seat to thefront or back and hold it. Release theswitch at the desired position.

qSeat Recline (Driver's Seat)

WARNINGDo not drive with the seats reclined:Sitting in a reclined position while thevehicle is moving is dangerousbecause you don't get the fullprotection from seat belts. Duringsudden braking or a collision, you canslide under the lap belt and sufferserious internal injuries. Formaximum protection, sit well back andupright.

Always sit in a front passenger seatproperly with the seatback upright andfeet on the floor:If your vehicle is equipped with frontpassenger seat weight sensors, sittingin the front passenger seat improperlyout of position or with the seatbackreclined too far while the vehicle ismoving is dangerous as it can take offweight from the seat bottom and affectthe weight determination of the frontpassenger sensing system. As a resultthe front passenger will not have thesupplementary protection of the airbag and seat belt pretensioner, whichcould cause result in serious injury.Always sit upright against yourseatback, with your feet on the floor.

2-6


Seats


Form No.8W89-EA-06K

Black plate (21,1)

Change the seatback angle by pressing thefront or rear side of the reclining switch.Release the switch at the desired position.

qHeight Adjustment (Driver's Seat)

Front of seat bottom

To adjust the front height of the seatbottom, raise or lower the front of theslide lifter switch on the left side of theseat.

Rear of seat bottom

Raise or lower the back of the switch toadjust the rear height of the seat bottom.

Whole seat

Raise the seat by pulling up on the centerof the switch. Release the switch at thedesired position.

Lower the seat by pressing down on thecenter of the switch. Release the switch atthe desired position.


Seats

2-7


Form No.8W89-EA-06K

Black plate (22,1)

qLumbar Support Adjustment(Driver's Seat)

To adjust the lumbar support, pull thelever forward.

qHead Restraint




qSeat Warmerí

The front seats are electrically heated. Theignition switch must be in the ONposition.

Press the switch to turn the seat warmeron or off. When the switch is in the ONposition, the indicator light will come on.

ON

OFF

2-8


íSome models.

Seats


Form No.8W89-EA-06K

Black plate (23,1)

NOTE

The seat temperature is regulatedautomatically by a thermostat. Otherthan turning it on or off, it cannot beadjusted.

Rear Seat

WARNINGDo not stack cargo higher than theseatbacks or place articles on the rearpackage tray or on the luggagecompartment cover:Stacking luggage or other cargohigher than the seatbacks, and placingarticles on the rear package tray or onthe luggage compartment cover isdangerous. During sudden braking ora collision, objects can fly around andbecome projectiles that may hit andinjure passengers.

Make sure luggage and cargo issecured before driving:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury.

Make sure the adjustable componentsof a seat are locked in place:Adjustable seats that are not securelylocked are dangerous. In a suddenstop or collision, the seat or seatbackcould move, causing injury.


Seats

2-9


Form No.8W89-EA-06K

Black plate (24,1)

WARNINGDo not drive with the seatbackunlocked:The seatback plays an important rolein your protection in a vehicle.Leaving the seatback unlocked isdangerous as it can allow passengersto be ejected or thrown around andbaggage to strike occupants in asudden stop or collision, resulting insevere injury. After adjusting theseatback at any time, even when thereare no other passengers, rock theseatback to make sure it is locked inplace.

Never allow a passenger to sit or standon the folded seatback while thevehicle is moving:Driving with a passenger on the foldedseatback is dangerous. Allowing achild to sit up on the folded seatbackwhile the vehicle is moving isparticularly dangerous. In a suddenstop or even a minor collision, a childnot in a proper seat or child-restraintsystem and seat belt could be thrownforward, back or even out of thevehicle resulting in serious injuries ordeath. The child in the baggage areacould be thrown into other occupantsand cause serious injury.

Never give the car keys to children anddo not allow them to play in thevehicle:Playing with the folding rear seats isdangerous. Once the seatbacks areback up, a child in the trunk wouldnot be able to get out the way they hadentered. If you have small children,keep the seatbacks locked (sedan).

NOTE

When returning a rear seat to itsoriginal position, also replace the seatbelt to its normal position. Verify thatthe seat belt pulls out and retracts.

qSplit-Folding Rear Seatback (Sedan)

The seatbacks can be folded down toprovide more space in the trunk.

To fold the seatbacks

WARNINGAlways remove the child-restraintsystem from the rear seat beforeoperating the remote handle levers forthe rear seat:Operating the remote handle leverswhile a rear-facing child-restraintsystem is in the rear seat is dangerous.It could cause injury to a child seatedin the child-restraint system when theseatback suddenly flips forward.

Make sure there is nobody in the rearseat area before operating the remotehandle levers:Not checking the rear seat area forpersons before folding the seatbackswith the remote handle levers isdangerous. The rear seat area isdifficult to see from the rear of thevehicle. Operating the remote handlelevers without checking could causeinjury to a person when a seatbacksuddenly flips forward.

2-10


Seats


Form No.8W89-EA-06K

Black plate (25,1)

CAUTIONBefore folding the seatbacks with theremote handle levers, make sure there isno cup in a rear cup holder. Folding theseatbacks with the remote handle leverswhile a cup is in the cup holder couldsoil or damage the seat bottom andseatback.

CAUTIONBe careful of the following when usingthe remote handle levers:

l On a downward slope, the seatbackcould flip forward faster than on aflat area.

l On an upward slope, the seatbackmay not fold down. When theseatbacks cannot be folded downwith levers, pull the rear seatbackforward from inside the vehicle.

1. Unfasten the lap portion of the center-rear seat belt (page 2-23).

CAUTIONAlways unfasten the lap portion of thebelt before folding left-rear seatback.Leaving the lap portion of the beltfastened could cause damage to the seatbelt, buckle and seatback.

2. After checking that the rear seats areclear, open the trunk and pull theremote handle levers on the left andright side of the trunk.

To return the seatbacks to the uprightposition

1. Lift the seatbacks upright.

2. Pull on the top of the seatbacks frominside the vehicle to make sure they arelocked.

3. Fasten the center-rear lap/shoulder beltand check that all seat belts are routedproperly for passenger use (page 2-23).

WARNINGAlways make sure the seat belts arefully pulled out from under theseatbacks:A seat belt caught under a seatbackafter the seatback is returned to itsupright position is dangerous. In acollision or sudden stop, the seat beltcannot provide adequate protection.


Seats

2-11


Form No.8W89-EA-06K

Black plate (26,1)

qEasy Fold Down Rear Seatbacksand Forward Slide Seat Bottomfor Added Luggage Space (5-Door/Sport Wagon)

The seatback can be folded down and theseat bottom slid forward to provide a flatsurface extending from the back of thefront seats to the rear of the vehicle forextra luggage space.

To fold down the rear seatbacks andslide forward seat bottoms

WARNINGAlways remove the child-restraintsystem from the rear seat beforeoperating the remote handle levers forthe rear seat:Operating the remote handle leverswhile a rear-facing child-restraintsystem is in the rear seat is dangerous.It could cause injury to a child seatedin the child-restraint system when theseatback suddenly flips forward.

Make sure there is nobody in the rearseat area before operating the remotehandle levers:Not checking the rear seat area forpersons before folding the seatbackswith the remote handle levers isdangerous. The rear seat area isdifficult to see from the rear of thevehicle. Operating the remote handlelevers without checking could causeinjury to a person when a seatbacksuddenly flips forward.

CAUTIONBefore folding the seatbacks with theremote handle levers, make sure there isno cup in a rear cup holder. Folding theseatbacks with the remote handle leverswhile a cup is in the cup holder couldsoil or damage the seat bottom andseatback.

2-12


Seats


Form No.8W89-EA-06K

Black plate (27,1)

When using the remote handle levers:

CAUTIONBe careful of the following when usingthe remote handle levers:

l On a downward slope, the seatbackcould flip forward faster than on aflat area.

l On an upward slope, the seatbackmay not fold down. When theseatbacks cannot be folded downwith levers, pull the rear seatbackforward from inside the vehicle.


CAUTIONAlways unfasten the lap portion of thebelt before folding left-rear seatback.Leaving the lap portion of the beltfastened could cause damage to the seatbelt, buckle and seatback.

2. After checking that the rear seats areclear, open the liftgate compartmentand pull the remote handle levers onthe left and right side of the liftgatecompartment.

When using the rear seatback knobs:

CAUTIONWhen operating the rear seatback knob,make sure you support the seatbackwith your hand. If the seatback is notsupported with your hand, it will flipforward suddenly and could causeinjury to the finger that pushes the rearseatback knob down.


CAUTIONAlways unfasten the lap portion of thebelt before folding the rear-leftseatback. Leaving the lap portion of thebelt fastened could cause damage to theseat belt, buckle and seatback.

2. Support the seatback with your hand.


Seats

2-13


Form No.8W89-EA-06K

Black plate (28,1)

3. Push the rear seatback knob down.

To return the seatbacks to the uprightposition

1. Lift the seatbacks upright.

2. Pull on the top of the seatbacks frominside the vehicle to make sure they arelocked.

3. Fasten the center-rear lap/shoulder beltand check that all seat belts are routedproperly for passenger use (page 2-23).

WARNINGAlways make sure the seat belts arefully pulled out from under theseatbacks:A seat belt caught under a seatbackafter the seatback is returned to itsupright position is dangerous. In acollision or sudden stop, the seat beltcannot provide adequate protection.

WARNINGWhen returning the seatback to theupright position, make sure there is nored indication:A rear seatback not fully returned andlocked in the upright position isdangerous. Sudden stops ormaneuvering could cause a seatbackto flip forward suddenly resulting ininjury. If the red indicator is visible onthe back of the rear seatback knob, theseatback is not locked in the uprightposition.

Unlocked position

Locked position

qHead Restraint (5-Door/SportWagon)


2-14


Seats


Form No.8W89-EA-06K

Black plate (29,1)

Height adjustment



qArmrest

The rear armrest in the center of the rearseatback can be used (no occupant in thecenter seat) or placed upright.


Seats

2-15


Form No.8W89-EA-06K

Black plate (30,1)

Seat Belt PrecautionsSeat belts help to decrease the possibility of severe injury during accidents and suddenstops. Mazda recommends that the driver and all passengers always wear seat belts.

All of the seat belt retractors are designed to keep the lap/shoulder belts out of the waywhen not in use.

The driver's seat belt has no provisions for child-restraint systems and has only anemergency locking mode. The driver may wear it comfortably, and it will lock during acollision.

However, the front passenger's seat and all rear lap/shoulder belt retractors operate in twomodes: emergency locking mode, and for child-restraint systems, automatic locking mode.While we recommend you put all children in the rear seats, if you must use the frontpassenger seat for a child, slide the front passenger seat as far back as possible and makesure any child-restraint system is secured properly.

2-16


Seat Belt Systems


Form No.8W89-EA-06K

Black plate (31,1)

WARNINGAlways wear your seat belt and make sure all occupants are properly restrained:Not wearing a seat belt is extremely dangerous. During a collision, occupants notwearing seat belts could hit someone or things inside the vehicle or even be thrown outof the vehicle. They could be seriously injured or even killed. In the same collision,occupants wearing seat belts would be much safer.

Do not operate a vehicle with a damaged seat belt:Using a damaged seat belt is dangerous. An accident could damage the belt webbingof the seat belt in use. A damaged seat belt cannot provide adequate protection in acollision. The front air bags and seat belt pretensioners deploy simultaneouslyregardless of whether the driver or a front seat passenger is seated during a collision.Therefore, both front seat belts must be inspected after a collision and replaced ifnecessary. Have an Authorized Mazda Dealer inspect all seat belt systems in useduring an accident before they are used again.

Do not wear twisted seat belts:Twisted seat belts are dangerous. In a collision, the full width of the belt is notavailable to absorb the impact. This puts more force on the bones beneath the belt,which could cause serious injury or death.

Never use one seat belt on more than one person at a time:Using one seat belt for more than one person at a time is dangerous. A seat belt usedin this way cannot spread the impact forces properly and the two passengers could becrushed together and seriously injured or even killed. Never use one belt for morethan one person at a time and always operate the vehicle with each occupant properlyrestrained.

CAUTIONBelt retraction may become difficult if the belts and rings are soiled, so try to keep themclean. For more details about cleaning the seat belts, refer to “Cleaning the Lap/ShoulderBelt Webbing” (page 8-59).


Seat Belt Systems

2-17


Form No.8W89-EA-06K

Black plate (32,1)

qPregnant Women and Persons with Serious Medical Conditions

Pregnant women should always wear seat belts. Ask your doctor for specificrecommendations.The lap belt should be worn SNUGLYAND AS LOWAS POSSIBLE OVER THE HIPS.The shoulder belt should be worn across your shoulder properly, but never across thestomach area.Persons with serious medical conditions also should wear seat belts. Check with yourdoctor for any special instructions regarding specific medical conditions.

qEmergency Locking Mode

In the emergency locking mode, the belt remains comfortable on the occupant and theretractor will lock in position during a collision. When the seat belt is fastened, it willalways be in the emergency locking mode until it is switched to automatic locking mode bypulling it all the way out to its full length. If the belt feels tight and hinders comfortablemovement while the vehicle is stopped or in motion, it may be in the automatic lockingmode because the belt has been pulled too far out. To return to the belt to the morecomfortable emergency locking mode, wait until the vehicle has stopped in a safe, levelarea, retract the belt fully to convert it back to emergency locking mode and then extend itaround you again.

qAutomatic Locking Mode

Always use the automatic locking mode to keep the child-restraint system from shifting toan unsafe position in the event of an accident. To enable seat belt automatic locking mode,pull it all the way out and connect it as instructed on the child-restraint system. It willretract down to the child-restraint system and stay locked on it. See the section on childrestraint (page 2-29).

2-18


Seat Belt Systems


Form No.8W89-EA-06K

Black plate (33,1)

Seat Belt (Except Center-Rear Position)

NOTE

When using the center-rear seat belt,refer to “Center-Rear Position SeatBelt” (page 2-23).

qFastening the Seat Belts

1. Grasp the tongue.

2. Slowly pull out the lap/shoulder belt.

Tongue

Belt

3. Insert the tongue into the buckle untilyou hear a click.

Buckle

Tongue

WARNINGPositioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.

4. Position the lap belt as low as possible,not on the abdominal area, then adjustthe shoulder belt so that it fits snuglyagainst your body.

Keep low on hip bone

Too high

Take up slack

WARNINGPositioning the Lap Portion of theSeat Belt:The lap portion of the seat belt worntoo high is dangerous. In a collision,this would concentrate the impactforce directly on the abdominal area,causing serious injury. Wear the lapportion of the belt snugly and as lowas possible.


Seat Belt Systems

2-19


Form No.8W89-EA-06K

Black plate (34,1)

qUnfastening the Seat Belts

Depress the button on the buckle. If thebelt does not fully retract, pull it out andcheck for kinks or twists. Then make sureit remains untwisted as it retracts.

Button

NOTE

If a belt does not fully retract, inspect itfor kinks and twists. If it is still notretracting properly, have it inspected atan Authorized Mazda Dealer.

qShoulder Belt Adjusterí

Adjust the height of the shoulder belt ifthe seat belt touches your neck, or if itcrosses your arm instead of your shoulder.To raise the shoulder belt adjuster, pushthe adjuster up. To lower the shoulder beltadjuster, pull the button and slide it down.Make sure the adjuster is locked.

WARNINGPositioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.

2-20


íSome models.

Seat Belt Systems


Form No.8W89-EA-06K

Black plate (35,1)

Front Seat Belt Pretensionerand Load Limiting Systems

For optimum protection, the driver andfront passenger seat belts are equippedwith pretensioner and load limitingsystems.In moderate or severe frontal or near-frontal accidents, the front air bag andpretensioner systems deploysimultaneously. The front seat beltretractors remove slack quickly as the airbags are expanding. The seat beltpretensioner system cannot provideadequate protection in an accident if theseat belt is not fastened properly. The loadlimiting system releases belt webbing in acontrolled manner to reduce belt force onthe occupant's chest.

WARNINGWear seat belts only as recommendedin this owner's manual:Incorrect positioning of the driver andfront passenger seat belts isdangerous. Without properpositioning, the pretensioner and loadlimiting systems cannot provideadequate protection in an accidentand this could result in serious injury.For more details about wearing seatbelts, refer to “Fastening the seatbelts” (page 2-19).

WARNINGDo not use seat belts with expendedpretensioners:One or both front air bags may deploy,and the corresponding pretensioner(s)will also deploy at the same time. Useof front seat belts with thepretensioner system expended isdangerous. Like the air bags, the seatbelt pretensioners will only functiononce. After they are expended, theywill not function again and must bereplaced immediately. If the seat beltpretensioners are not replaced, therisk of injury in a collision willincrease. Always have an AuthorizedMazda Dealer inspect the seat beltpretensioners and air bags after anycollision. Expended seat beltpretensioners and air bags must bereplaced after any collision whichcaused them to deploy. Additionally,the load limiter will only limit loads onthe chest once in a collision and this isanother reason to have the front seatbelts inspected.

Do not modify the components orwiring, or use electronic testingdevices on the pretensioner system:Modifying the components or wiringof the pretensioner system, includingthe use of electronic testing devices isdangerous. You could accidentallyactivate it or make it inoperable whichwould prevent it from activating in anaccident. The occupants or repairerscould be seriously injured.


Seat Belt Systems

2-21


Form No.8W89-EA-06K

Black plate (36,1)

WARNINGProperly dispose of the pretensionersystem:Improper disposal of the pretensionersystem or a vehicle with non-deactivated pretensioners isdangerous. Unless all safetyprocedures are followed, injury couldresult. Ask an Authorized MazdaDealer how to safely dispose of thepretensioner system or how to scrap apretensioner-equipped vehicle.

NOTE

l The pretensioner system will onlyactivate in a moderate or greaterfrontal or near-frontal collision. Itwill not activate in most rollovers,side or rear impacts.

l Some smoke (non-toxic gas) will bereleased when the air bags andpretensioners deploy. This does notindicate a fire. This gas normally hasno effect on occupants, however,those with sensitive skin mayexperience light skin irritation. Ifresidue from the deployment of theair bags or the front pretensionersystem gets on the skin or in theeyes, wash it off as soon as possible.

qAir Bag/Front Seat Belt PretensionerSystems Warning Light

If the air bag/front seat belt pretensionersystem is normal, the warning lightilluminates when the ignition switch isturned to the ON position or after theengine is cranked. The warning light turnsoff after a specified period of time.

A system malfunction is indicated whenthe warning light constantly flashes,constantly illuminates or doesn'tilluminate at all when the ignition switchis turned to the ON position. If any ofthese occur, consult an Authorized MazdaDealer as soon as possible. The systemmay not work in an accident.

WARNINGNever tamper with the air bag/pretensioner systems and always havean Authorized Mazda Dealer performall servicing and repairs:Self-servicing or tampering with thesystems is dangerous. An air bag/pretensioner could accidentallyactivate or become disabled causingserious injury or death.

2-22


Seat Belt Systems


Form No.8W89-EA-06K

Black plate (37,1)

Center-Rear Position SeatBelt

Before using the center-rear lap/shoulderbelt make sure tongue (A) and anchorbuckle (B) are fastened.

(A)

(B)

qFastening the Seat Belt

1. Grasp the tongue (C).

2. Slowly pull out the lap/shoulder belt.

3. Insert the tongue (C) into the buckle(D) until you hear a click.

(C)

(D) (B)

(A)

WARNINGFastening the Center-Rear Seat Beltwith Only One Buckle:Fastening the center-rear seat beltwith only one buckle is dangerous. Ifonly one pair of seat belt tongue andbuckle, either tongue (A) and anchorbuckle (B) or tongue (C) and anchorbuckle (D), is fastened, the seat beltcannot provide full protection. In asudden stop or collision, the usercould slide under the belt and sufferserious injuries. Always make surethat both pairs of seat belt tongues andbuckles are fastened properly.

Positioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.

4. Position the lap belt as low as possible,not on the abdominal area, then adjustthe shoulder belt so that it fits snuglyagainst your body.


Seat Belt Systems

2-23


Form No.8W89-EA-06K

Black plate (38,1)

WARNINGPositioning the Lap Portion of theSeat Belt:The lap portion of the seat belt worntoo high is dangerous. In a collision,this would concentrate the impactforce directly on the abdominal area,causing serious injury. Wear the lapportion of the belt snugly and as lowas possible.

qUnfastening the Seat Belt

Depress the button on the buckle. If thebelt does not fully retract, pull it out andcheck for kinks or twists. Then make sureit remains untwisted as it retracts.

Button

NOTE

If a belt does not fully retract, inspect itfor kinks and twists. If it is still notretracting properly, have it inspected atan Authorized Mazda Dealer.

qUnfastening the Lap Portion ofthe Seat Belt

Insert a small object such as a key in theanchor buckle (B) slot.

(B)

(A)

CAUTIONAlways unfasten the lap portion of thebelt before folding the left-rearseatback. Leaving the lap portion of thebelt fastened could cause damage to theseat belt, buckle and seatback.

NOTE

To encourage rear seat passengers towear their seat belts, we suggest leavingthe center-rear lap position of the beltfastened at all times except whenfolding the rear seat forward.

2-24


Seat Belt Systems


Form No.8W89-EA-06K

Black plate (39,1)

qFastening the Lap Portion of theSeat Belt

Grasp tongue (A) and insert it into theanchor buckle (B) until you hear a click. Itis now secure for passenger use.

NOTE

After returning the left-rear seatback toits upright position, fasten the lapportion of the belt.

qStowing and pulling out theCenter-Rear Position Seat Belt

The center-rear position seat belt can bestowed using the following procedure.

CAUTIONWhen stowing the seat belt, make surethe belt is locked securely into therecess. If the seat belt is not lockedsecurely, it could fall down suddenlyand cause injury.

Sedan/5-Door

To stow the seat belt, retract the belt, puttongues (A) and (C) together and insertthem into the recess.

Sedan (Behind head restraint on leftside)

(A)

(C)

5-Door (Left side of luggagecompartment)

(A) (C)

To pull out the seat belt, slide tongueswith your finger, and slowly pull out theseat belt from the recess.


Seat Belt Systems

2-25


Form No.8W89-EA-06K

Black plate (40,1)

Sport Wagon

To stow the seat belt, retract the belt, puttongues (A) and (C) together and insertthem into the ceiling recess.

(A)

(C)

Ceiling recess

To pull out the seat belt, slide tongue (A)with your finger while moving itdownward, and slowly pull out the seatbelt from the ceiling recess.

Seat Belt ExtenderIf your seat belt is not long enough, evenwhen fully extended, a seat belt extendermay be available to you at no charge fromyour Authorized Mazda Dealer.This extender will be only for you and forthe particular vehicle and seat. Even if itplugs into other seat belts, it may not holdin the critical moment of a crash.When ordering an extender, only orderone that provides the necessary additionallength to fasten the seat belt properly.Please contact your Authorized MazdaDealer for more information.

WARNINGDo not use a seat belt extender unlessit is necessary:Using a seat belt extender when notnecessary is dangerous. The seat beltwill be too long and not fit properly. Inan accident, the seat belt will notprovide adequate protection and youcould be seriously injured. Only usethe extender when it is required tofasten the seat belt properly.

Do not use an improper extender:Using a seat belt extender that is foranother person or a different vehicleor seat is dangerous. The seat belt willnot provide adequate protection andthe user could be seriously injured inan accident. Only use the extenderprovided for you and for the particularvehicle and seat. NEVER use theextender in a different vehicle or seat.

2-26


Seat Belt Systems


Form No.8W89-EA-06K

Black plate (41,1)

WARNINGDo not use an extender that is toolong:Using an extender that is too long isdangerous. The seat belt will not fitproperly. In an accident, the seat beltwill not provide adequate protectionand you could be seriously injured. Donot use the extender or choose oneshorter in length if the distancebetween the extender's buckle and thecenter of the user's body is less than15cm (6 in).

NOTE

When not in use, remove the seat beltextender and store it in the vehicle. Ifthe seat belt extender is left connected,the seat belt extender might getdamaged as it will not retract with therest of the seat belt and can easily fallout of the door when not in use and bedamaged. In addition, the seat beltwarning light will not illuminate andfunction properly.

Seat Belt Warning Light/Beep

The seat belt warning light illuminatesand a beep sound will be heard if thedriver's seat belt is not fastened when theignition switch is turned to the ONposition.

Conditions of operation

Condition Result

The driver's seat belt is notfastened when the ignitionswitch is turned to the ONposition.

The warning lightflashes and a beepsound will be heardfor about 6 seconds.

The driver's seat belt isfastened while the warninglight and the beep sound areactivated.

The warning lightturns off and the beepsound stops.

The driver's seat belt isfastened before the ignitionswitch is turned to the ONposition.

The warning light willnot illuminate and thebeep sound will not beheard.

qBelt Minder

NOTE

The belt minder can be deactivated.Consult an Authorized Mazda Dealer todeactivate and restore the seat beltminder.


Seat Belt Systems

2-27


Form No.8W89-EA-06K

Black plate (42,1)

Driver's seat

The belt minder is a supplementalwarning to the seat belt warning function.If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, the warning light/beepoperates to give you further remindersaccording to the chart below.

Condition

Vehicle speed

Between 0― 20km/h

(0 ― 12 mph)

20 km/h(12 mph) or

more

Seat belt

Indicator

Beep

: Fastened: Unfastened: Illuminated: Flashing: Beep

Once the beep sound is heard, it continuessounding even if the vehicle speed lowersto 20 km/h (12 mph) or less until theseatbelt is fastened or the beep soundperiod has passed.

Front passenger seat

The seat belt warning light/beep remindsthe front passenger to fasten the seat beltaccording to the chart below.

Condition

Vehicle speed

Between 0― 20km/h

(0 ― 12 mph)

20 km/h(12 mph) or

more

Seat belt(Driver)

Seat belt(Passenger)

Indicator

Beep



NOTE

l To allow the front passenger seatweight sensor to function properly,do not place and sit on an additionalseat cushion on the front passengerseat. The sensor may not functionproperly because the additional seatcushion could cause sensorinterference.

l Placing packages, luggage, pets orother items on the front passengerseat may cause the front passengerbelt minder warning light and beepto operate depending on the weightof the item.

2-28


Seat Belt Systems


Form No.8W89-EA-06K

Black plate (43,1)

Child Restraint PrecautionsMazda strongly urges the use of child-restraint systems for children small enough to usethem.

You are required by law to use a child-restraint system for children in the U.S. and Canada.Check your local and state or provincial laws for specific requirements regarding the safetyof children riding in your vehicle.

Whatever child-restraint system you consider, please pick the appropriate one for the ageand size of the child, obey the law and follow the instructions that come with the individualchild-restraint system.

A child who has outgrown child-restraint systems should sit in the rear and use seat belts,both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer tothe center of the vehicle in the outboard seats, and towards the buckle on the right if thechild is seated on the center seat.

Statistics confirm that the rear seat is the best place for all children up to 12 years of age,and more so with a supplemental restraint system (air bags).

A rear-facing child-restraint system should NEVER be used on the front seat with the airbag system activated. The front passenger's seat is also the least preferred seat for otherchild-restraint systems.

To reduce the chance of injuries caused by deployment of the front passenger air bag, thefront passenger seat weight sensors work as a part of the supplemental restraint system.This system deactivates the front passenger front and side air bags and also the frontpassenger seat belt pretensioner system when the total seated weight on the front passengerseat is less than approximately 30 kg (66 lb).

When an infant or small child sits on the front passenger seat, the system shuts off the frontpassenger front and side air bags and seat belt pretensioner system, so make sure the frontpassenger air bag deactivation indicator light illuminates.

Even if the front passenger air bag is shut off, Mazda strongly recommends that children beproperly restrained and child-restraint systems of all kinds are properly secured on the rearseats which are the best place for children.

For more details, refer to “Front passenger seat weight sensors” (page 2-53).


Child Restraint

2-29


Form No.8W89-EA-06K

Black plate (44,1)

WARNINGUse the correct size child-restraint system:For effective protection in vehicle accidents and sudden stops, a child must beproperly restrained using a seat belt or child-restraint system depending on age andsize. If not, the child could be seriously injured or even killed in an accident.

Follow the manufacturer's instructions and always keep the child-restraint systembuckled down:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Make sureany child-restraint system is properly secured in place according to the child-restraintsystem manufacturer's instructions. When not in use, remove it from the vehicle orfasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCHchild-restraint systems and the corresponding tether anchor.

Always secure a child in a proper child-restraint system:Holding a child in your arms while the vehicle is moving is extremely dangerous. Nomatter how strong the person may be, he or she cannot hold onto a child in a suddenstop or collision and it could result in serious injury or death to the child or otheroccupants. Even in a moderate accident, the child may be exposed to air bag forcesthat could result in serious injury or death to the child, or the child may be slammedinto an adult, causing injury to both child and adult.

Never use a rear-facing child-restraint system in the front seat with an air bag thatcould deploy:Rear-facing child-restraint systems on the front seat are particularly dangerous eventhough you may feel assured that a front passenger air bag will not deploy based onthe fact that the front passenger air bag deactivation indicator light illuminates.The child-restraint system can be hit by a deploying air bag and moved violentlybackward resulting in serious injury or death to the child.

2-30


Child Restraint


Form No.8W89-EA-06K

Black plate (45,1)

WARNINGSeating a child in a child-restraint system on the front passenger seat is dangerous:Vehicles equipped with front passenger seat weight sensors are also equipped with afront passenger air bag deactivation indicator light (page 2-39). Even with the frontpassenger seat weight sensors, if you must use the front passenger seat for children,seating a child in a child-restraint system on the front passenger seat under thefollowing conditions increases the danger of the front passenger air bag deployingand could result in serious injury or death to the child.l The total seated weight of the child with the child-restraint system on the frontpassenger seat is approximately 30 kg (66 lb) or more with a child in the child-restraint system.

l Luggage or other items are placed on the seat with the child in the child-restraintsystem.

l A rear passenger or luggage push or pull down on the front passenger seatback.l A rear passenger puts their feet on the front seat rails.l Luggage or other items are placed on the seatback or hung on the head restraint.l The seat is washed.l Liquids are spilled on the seat.l The front passenger seat is moved backward, pushing into luggage or other itemsplaced behind it.

l The front passenger seatback contacts the rear seat.l Luggage or other items are placed between the front passenger seat and driver seat.l Any accessories, which might increase the total seated weight on the frontpassenger seat, are attached to the front passenger seat.

The designated positions with seat belts on the rear seats are the safest places forchildren. Always use seat belts and child restraints.

Do not allow a child to lean over or against the side window of a vehicle with side andcurtain air bags:It is dangerous to allow anyone to lean over or against the side window, the area ofthe front passenger seat, the front and rear window pillars and the roof edge alongboth sides from which the side and curtain air bags deploy, even if a child-restraintsystem is used. If the vehicle is equipped with side and curtain air bags, the impact ofinflation could cause serious injury or death to the child. Furthermore, leaning overor against the front door could block the side and curtain air bags and eliminate theadvantages of supplemental protection. With the front air bag and the additional sideair bag that comes out of the front seat, the rear seat is always a better location forchildren. Do not allow a child to lean over or against the side window, even if the childis seated in a child-restraint system.


Child Restraint

2-31


Form No.8W89-EA-06K

Black plate (46,1)

WARNINGNever use one seat belt on more than one person at a time:Using one seat belt for more than one person at a time is dangerous. A seat belt usedin this way cannot spread the impact forces properly and the two passengers could becrushed together and seriously injured or even killed. Never use one belt for morethan one person at a time and always operate the vehicle with each occupant properlyrestrained.

Always remove the child-restraint system from the rear seat before operating theremote handle levers for the rear seat:Operating the remote handle levers while a rear-facing child-restraint system is in therear seat is dangerous. It could cause injury to a child seated in the child-restraintsystem when the seatback suddenly flips forward.

CAUTIONA seat belt or child-restraint system can become very hot in a closed vehicle duringwarm weather. To avoid burning yourself or a child, check them before you or your childtouches them.

NOTE

Your Mazda is equipped with LATCH lower anchors for attachment of speciallydesigned LATCH child-restraint systems in the rear seat. When using these anchors tosecure a child-restraint system, refer to “LATCH Child-Restraint Systems” (page 2-41).

2-32


Child Restraint


Form No.8W89-EA-06K

Black plate (47,1)

Installing Child-RestraintSystems

Accident statistics reveal that a child issafer in the rear seat. The front passenger'sseat is clearly the worst choice for anychild under 12, and with rear-facing child-restraint systems it is clearly unsafe due toair bags.

Some child-restraint systems now comewith tethers and therefore must beinstalled on the seats that take tethers tobe effective. In your Mazda, tetheredchild-restraint systems can only beaccommodated in the three positions onthe rear seat.

Even if your vehicle is equipped withfront passenger seat weight sensors (page2-53), which automatically deactivates thefront passenger air bag, a rear seat is thesafest place for a child of any age or size.

Some child-restraint systems also employspecially designed LATCH attachments;refer to “LATCH Child-RestraintSystems” (page 2-41).

WARNINGTethered Child-Restraint SystemsWork Only on Tether-Equipped RearSeats:Installation of a tether equipped child-restraint system in the frontpassenger's seat defeats the safetydesign of the system and will result inan increased chance of serious injuryif the child-restraint system goesforward without benefit of beingtethered.Place tether equipped child-restraintsystems where there are tetheranchors.

qRear Outboard Seat Child-Restraint System Installation

Follow these instructions when using achild-restraint system, unless you areattaching a LATCH-equipped child-restraint system to the rear LATCH loweranchors. Refer to “LATCH Child-Restraint Systems” (page 2-41).

NOTE

Follow the child-restraint systemmanufacturer's instructions carefully. Ifyou are not sure whether you have aLATCH system or tether, check in thechild-restraint system manufacturer'sinstructions and follow themaccordingly. Depending on the type ofchild-restraint system, it may notemploy seat belts which are inautomatic locking mode.


Child Restraint

2-33


Form No.8W89-EA-06K

Black plate (48,1)

1. Make sure the seatback is securelylatched by pushing it back until it isfully locked.

2. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions.

3. To get the retractor into the automaticlocking mode, pull the shoulder beltportion of the seat belt until the entirelength of the belt is out of the retractor.

4. Push the child-restraint system firmlyinto the vehicle seat. Be sure the beltretracts as snugly as possible. Clickingfrom the retractor will be heard duringretraction if the system is in theautomatic locking mode. If the beltdoes not lock the seat down tight,repeat this step.

NOTE

Inspect this function before each use ofthe child-restraint system. You shouldnot be able to pull the shoulder belt outof the retractor while the system is inthe automatic locking mode. When youremove the child-restraint system, besure the belt fully retracts to return thesystem to emergency locking modebefore occupants use the seat belts.

5. If your child-restraint system requiresthe use of a tether strap, refer to themanufacturer's instructions to hook andtighten the tether strap after raising thehead restraint (5-Door/Sport Wagon).

2-34


Child Restraint


Form No.8W89-EA-06K

Black plate (49,1)

Anchor bracket location (Sedan)

Tether strap position (Sedan)

Anchor bracket

Tether strap

Anchor bracket location (5-Door/SportWagon)

Tether strap position (5-Door/SportWagon)

Tether strap

Route between head restraint upright.

WARNINGUse the tether and tether anchor onlyfor a child-restraint system:Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether or tetheranchor and result in injury.

Always route the tether strap betweenthe head restraint and the seatback (5-Door/Sport Wagon):Routing the tether strap on top of thehead restraint is dangerous. In acollision the tether strap could slide offthe head restraint and loosen thechild-restraint system. The child-restraint system could move whichmay result in death or injury to thechild.


Child Restraint

2-35


Form No.8W89-EA-06K

Black plate (50,1)

WARNINGAlways attach the tether strap to thecorrect tether anchor position:Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.

qCenter-Rear Seat Child-RestraintSystem Installation

1. Secure the child-restraint system withthe seat belt, according to themanufacturer's instructions.

2. Secure the tether strap according to thechild-restraint system manufacturer'sinstruction.


Anchor bracket

Tether strap

Tether strap position (5-Door)

Tether strapAnchorbracket

Tether strap position (Sport Wagon)

Anchorbracket

Tether strap

2-36


Child Restraint


Form No.8W89-EA-06K

Black plate (51,1)

WARNINGUse the tether and tether anchor onlyfor a child-restraint system:Child-restraint system anchorages aredesigned to withstand only those loadsimposed by correctly installed child-restraint systems.Under nocircumstances are they to be used foradult seat belts, harnesses, or forattaching other items or equipment tothe vehicle.

Always attach the tether strap to thecorrect tether anchor position:Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.

qIf You Must Use the Front Seatfor Children

If you cannot put all children in the rearseat, at least put the smallest children inthe rear and be sure the largest child upfront uses the shoulder belt over theshoulder.NEVER put a rear-facing child-restraintsystem on the front passenger seat, evenwith a seat weight sensor equippedvehicle.This seat is also not set up for tetheredchild-restraint systems, put them in one ofthe rear seat positions set up with tetheranchors.Likewise the LATCH child-restraintsystem cannot be secured in the frontpassenger's seat and should be used in therear seat.Don't allow anyone to sleep against theside window if you have an optional sideand curtain air bag, it could cause seriousinjuries to an out of position occupant. Aschildren more often sleep in cars, it isbetter to put them in the rear seat. Ifinstalling the child-restraint system on thefront seat is unavoidable, follow theseinstructions when using a front-facingchild-restraint system in the frontpassenger's seat.


Child Restraint

2-37


Form No.8W89-EA-06K

Black plate (52,1)

NOTE

l To check if your front seats have sideair bags:Mazda vehicles equipped with sideair bag will have a “SRS AIRBAG”tag on the outboard shoulder of thefront seats.

l To check if your vehicle has curtainair bags:Mazda vehicles equipped withcurtain air bag will have an “SRSAIRBAG” marking on the front andrear window pillars along the roofedge.

WARNINGAlways move the front passenger seatas far back as possible if installing afront-facing child-restraint system onit is unavoidable:As your vehicle has front air bags anddoubly so if your vehicle has side airbags, a front-facing child-restraintsystem should be put on the frontpassenger seat only when it isunavoidable.Always move the seat as far back aspossible, because the force of adeploying air bag could cause seriousinjury or death to the child.

WARNINGNever use a rear-facing child-restraintsystem in the front seat with an air bagthat could deploy:Rear-facing child-restraint systems onthe front seat are particularlydangerous.Even in a moderate collision, thechild-restraint system can be hit by adeploying air bag and moved violentlybackward resulting in serious injuryor death to the child.

Do not allow a child to lean over oragainst the side window of a vehiclewith side and curtain air bags:It is dangerous to allow anyone to leanover or against the side window, thearea of the front passenger seat, thefront and rear window pillars and theroof edge along both sides from whichthe side and curtain air bags deploy,even if a child-restraint system is used.If the vehicle is equipped with side andcurtain air bags, the impact ofinflation could cause serious injury ordeath to the child. Furthermore,leaning over or against the front doorcould block the side and curtain airbags and eliminate the advantages ofsupplemental protection. With thefront air bag and the additional sideair bag that comes out of the frontseat, the rear seat is always a betterlocation for children. Do not allow achild to lean over or against the sidewindow, even if the child is seated in achild-restraint system.

2-38


Child Restraint


Form No.8W89-EA-06K

Black plate (53,1)

qFront Passenger's Seat Child-Restraint System Installation

1. Slide the seat as far back as possible.

2. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions.

3. To get the retractor into the automaticlocking mode, pull the shoulder beltportion of the seat belt until the entirelength of the belt is out of the retractor.

4. Push the child-restraint system firmlyinto the vehicle seat. Be sure the beltretracts as snugly as possible. Clickingfrom the retractor will be heard duringretraction if the system is in automaticlocking mode. If the belt does not lockthe seat down tight, repeat the previousstep and also this one.

NOTE

l Inspect this function before each useof the child-restraint system. Youshould not be able to pull theshoulder belt out of the retractorwhile the system is in the automaticlocking mode. When you remove thechild-restraint system, be sure thebelt fully retracts to return the systemto emergency locking mode beforeoccupants use the seat belts.

l Follow the child-restraint systemmanufacturer's instructions carefully.Depending on the type of child-restraint system, it may not employseat belts which are in automaticlocking mode.

5. Make sure the front passenger air bagdeactivation indicator light illuminatesafter installing a child-restraint systemon the front passenger seat.Refer to Front passenger air bagdeactivation indicator light on page2-53.


Child Restraint

2-39


Form No.8W89-EA-06K

Black plate (54,1)

WARNINGSeating a Child in a Child-RestraintSystem on the Front Passenger SeatWith the Front Passenger Air BagDeactivation Indicator Light NotIlluminated:While it is always better to install anychild-restraint system on the rear seat,it is essential to do so if the frontpassenger air bag deactivationindicator light does not illuminate(page 2-53). Seating a child in a child-restraint system installed on the frontpassenger seat with the frontpassenger air bag deactivationindicator light not illuminated isdangerous. If this indicator light doesnot illuminate even when the totalseated weight is less thanapproximately 30 kg (66 lb), thismeans that the front passenger frontand side air bags, and seat beltpretensioner are ready for deployment.If an accident were to deploy an airbag, a child sitting in the frontpassenger seat could be seriouslyinjured or killed. If the indicator lightdoes not illuminate after installing achild-restraint system on the frontpassenger seat, install the child-restraint system on the rear seat andconsult an Authorized Mazda Dealeras soon as possible.

2-40


Child Restraint


Form No.8W89-EA-06K

Black plate (55,1)

LATCH Child-Restraint SystemsYour Mazda is equipped with LATCH lower anchors for attachment of specially designedLATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise theseat will bounce around and put the child in danger. Most LATCH child-restraint systemsmust also be used in conjunction with a tether to be effective. If they have a tether youmust use it to better assure your child's safety.

WARNINGFollow the manufacturer's instructions for the use of the child-restraint system:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Make surethe child-restraint system is properly secured in place according to the child-restraintsystem manufacturer's instructions.

Never attach two child-restraint systems to the same LATCH lower anchor:Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.In a collision, one anchor may not be strong enough to hold two child-restraint systemattachments, and it may break, causing serious injury or death. If you use the seatposition for another child-restraint system when an outboard LATCH position isoccupied, use the center seat belts instead, and the tether if tether-equipped.

Make sure the child-restraint system is properly secured:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Follow thechild-restraint system manufacturer's instructions on belt routing to secure the seatjust as you would with a child in it so that nobody is tempted to put a child in animproperly secured seat later on. When not in use, remove it from the vehicle or fastenit with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child-restraint systems.

Make sure there are no seat belts or foreign objects near or around the LATCH child-restraint system:Not following the child-restraint system manufacturer's instructions when installingthe child-restraint system is dangerous. If seat belts or a foreign object prevent thechild-restraint system from being securely attached to the LATCH lower anchors andthe child-restraint system is installed improperly, the child-restraint system could movein a sudden stop or collision causing serious injury or death to the child or otheroccupants. When installing the child-restraint system, make sure there are no seatbelts or foreign objects near or around the LATCH lower anchors. Always follow thechild-restraint system manufacturer's instructions.


Child Restraint

2-41


Form No.8W89-EA-06K

Black plate (56,1)

qLATCH Child-Restraint SystemInstallation Procedure (RearOutboard Seats)


2. Expand the area between the seatbottom and the seatback slightly toverify the locations of the LATCHlower anchors.

NOTE

The markings above the LATCH loweranchors indicate the locations ofLATCH lower anchors for theattachment of a child-restraint system.

3. Secure the child-restraint system usingBOTH LATCH lower anchors,following the child-restraint systemmanufacturer's instruction.

4. If your child-restraint system cameequipped with a tether, that probablymeans it is very important to properlysecure the tether for child safety. Pleasecarefully follow the child-restraintsystem manufacturer's instructionswhen installing tethers.



Tether strap

Anchor bracket

Anchor bracket location (5-Door/SportWagon)

2-42


Child Restraint


Form No.8W89-EA-06K

Black plate (57,1)

Tether strap position (5-Door/SportWagon)

Tether strap

Route between head restraint upright.


Always route the tether strap betweenthe head restraint and the seatback (5-Door/Sport Wagon):Routing the tether strap on top of thehead restraint is dangerous. In acollision the tether strap could slide offthe head restraint and loosen thechild-restraint system. The child-restraint system could move whichmay result in death or injury to thechild.

WARNINGAlways attach the tether strap to thecorrect tether anchor position:Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.

qLATCH Child-Restraint SystemInstallation Procedure (RearCenter Seat)

The LATCH lower anchors at the centerof the rear seat are much further apart thanthe sets of LATCH lower anchors forchild-restraint system installation at otherseating positions. Child-restraint systemswith rigid LATCH attachments cannot beinstalled on the center seating position.Some LATCH equipped child-restraintsystems can be placed in the centerposition and will reach the nearestLATCH lower anchors which are 466 mm(18.35 in) apart. LATCH compatiblechild-restraint systems (with attachmentson belt webbing) can be used at thisseating position only if the child-restraintsystem manufacturer's instructions statethat the child-restraint system can beinstalled to LATCH lower anchors that are466 mm (18.35 in) apart. Do not attachtwo child-restraint systems to the sameLATCH lower anchor. If your child-restraint system has a tether, it must alsobe used for your child's optimum safety.



Child Restraint

2-43


Form No.8W89-EA-06K

Black plate (58,1)

2. Expand the area between the seatbottom and the seatback slightly toverify the locations of the LATCHlower anchors.

NOTE

The markings above the LATCH loweranchors indicate the locations ofLATCH lower anchors for theattachment of a child-restraint system.

3. Secure the child-restraint system usingBOTH LATCH lower anchors,following the child-restraint systemmanufacturer's instructions.

4. If your child-restraint system cameequipped with a tether, that probablymeans it is very important to properlysecure the tether for child safety. Pleasecarefully follow the child-restraintsystem manufacturer's instructionswhen installing tethers.



Tether strap

Anchor bracket

Anchor bracket location and tetherstrap position (5-Door)

Tether strapAnchorbracket

2-44


Child Restraint


Form No.8W89-EA-06K

Black plate (59,1)

Anchor bracket location and tetherstrap position (Sport Wagon)

Anchorbracket

Tether strap


Always attach the tether strap to thecorrect tether anchor position:Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.


Child Restraint

2-45


Form No.8W89-EA-06K

Black plate (60,1)

Supplemental Restraint Systems (SRS) PrecautionsThe front and side supplemental restraint systems (SRS) include up to 6 air bags (verify“SRS AIRBAG” location indicator marks).They are located in:

l The steering wheel hub (driver air bag)

l The front passenger dashboard (front passenger air bag)

l The outboard sides of the front seatbacks (side air bags)

l The front and rear window pillars, and the roof edge along both sides (curtain air bags)

These systems operate independently depending on the type of accident encountered; ifyou have side and curtain air bags, the side and curtain air bags are not likely to deploy onboth sides in the same accident because a vehicle is not often hit from both sides. The sideand curtain air bags and the frontal air bag system will not normally deploy during thesame type of accident unless a combination of frontal and side impacts occur.

The air bag supplemental restraint systems are designed to provide supplemental protectiononly in the front seats in certain situations and the rear outside passenger positions only insame-side collisions, so seat belts are always important in the following ways:

Without seat belt usage, the air bags cannot provide adequate protection during an accident.Seat belt usage is necessary to:

l Keep the occupant from being thrown into an inflating air bag.

l Reduce the possibility of injuries during an accident that is not designed for air baginflation, such as roll-over or rear impact.

l Reduce the possibility of injuries in frontal or side collisions that are not severe enoughto activate the air bags.

l Reduce the possibility of being thrown from your vehicle.

l Reduce the possibility of injuries to lower body and legs during an accident because theair bags provide no protection to these parts of the body.

l Hold the driver in a position which allows better control of the vehicle.

Small children must be protected by a child-restraint system as stipulated by law in everystate and province. In certain states and provinces, larger children must use a child-restraintsystem (page 2-29).Carefully consider which child-restraint system is necessary for your child and follow theinstallation directions in this Owner's Manual as well as the child-restraint systemmanufacturer's instructions.

2-46


SRS Air Bags


Form No.8W89-EA-06K

Black plate (61,1)

WARNINGSeat belts must be worn in air bag equipped vehicles:Depending only on the air bags for protection during an accident is dangerous. Alone,air bags may not prevent serious injuries. The appropriate air bags can be expected toinflate only in the first collision with frontal, near frontal or side forces that are atleast moderate. Vehicle occupants should always wear seat belts.

Children should not ride in the front passenger seat:Placing a child, 12 years or under, in the front seat is dangerous. The child could behit by a deploying air bag and be seriously injured or even killed. Even if the frontpassenger air bag deactivation indicator light illuminates, always move the frontpassenger seat as far back as possible. A sleeping child is more likely to lean againstthe door and be hit by the side air bag in a moderate, right-side collision. Wheneverpossible, always secure a child 12 years and under on the rear seat with anappropriate child-restraint system for the child's age and size.

Never use a rear-facing child-restraint system in the front seat with an air bag thatcould deploy:Rear-facing child-restraint systems on the front seat are particularly dangerous eventhough you may feel assured that a front passenger air bag will not deploy based onthe fact that the front passenger air bag deactivation indicator light illuminates.The child-restraint system can be hit by a deploying air bag and moved violentlybackward resulting in serious injury or death to the child.

Do not sit too close to the driver and front passenger air bags:Sitting too close to the driver and front passenger air bag modules or placing hands orfeet on them is extremely dangerous. The driver and front passenger air bags inflatewith great force and speed. Serious injuries could occur if someone is too close. Thedriver should always hold onto only the rim of the steering wheel. The front seatpassenger should keep both feet on the floor. Front seat occupants should adjust theirseats as far back as possible and always sit upright against the seatbacks with seatbelts worn properly.


SRS Air Bags

2-47


Form No.8W89-EA-06K

Black plate (62,1)

WARNINGSit in the center of the seat and wear seat belts properly:Sitting too close to the side air bag modules or placing hands on them is extremelydangerous. The side air bags inflate with great force and speed directly out of theoutboard side of the front seat and expand along the front door on the side the car ishit. Serious injury could occur if someone is sitting too close to the door or leaningagainst a window, or if rear seat occupants grab the sides of the front seatbacks.Furthermore, sleeping up against the door or hanging out the windows in the vehiclecould block the side and curtain air bags and eliminate the advantages ofsupplemental protection. Give the side and curtain air bags room to work by sitting inthe center of the seat while the vehicle is moving with seat belts worn properly.

Do not attach objects on or around the area where driver and front passenger air bagsdeploy:Attaching an object to the driver and front passenger air bag modules or placingsomething in front of them is dangerous. In an accident, an object could interfere withair bag inflation and injure the occupants.

Do not attach objects on or around the area where a side air bag deploys:Attaching things to the front seat in such a way as to cover the outboard side of theseat in any way is dangerous. In an accident the object could interfere with the side airbag, which inflates from the outboard side of the front seats, impeding the addedprotection of the side air bag system or redirecting the air bag in a way that isdangerous. Furthermore, the bag could be cut open releasing the gas.Do not hang net bags, map pouches or backpacks with side straps on the front seats.Never use seat covers on the front seats. Always keep the side air bag modules in yourfront seats free to deploy in the event of a side collision.

Do not attach objects on or around the area where a curtain air bag deploys:Attaching objects to the areas where the curtain air bag activates such as on thewindshield glass, side door glass, front and rear window pillars and along the roofedge and assist grips is dangerous. In an accident the object could interfere with thecurtain air bag, which inflates from the front and rear window pillars and along theroof edge, impeding the added protection of the curtain air bag system or redirectingthe air bag in a way that is dangerous. Furthermore, the bag could be cut openreleasing the gas.Do not place hangers or any other objects on the assist grips. When hanging clothes,hang them on the coat hook directly. Always keep the curtain air bag modules free todeploy in the event of a side collision.

2-48


SRS Air Bags


Form No.8W89-EA-06K

Black plate (63,1)

WARNINGDo not touch the components of the supplemental restraint system after the air bagshave inflated:Touching the components of the supplemental restraint system after the air bags haveinflated is dangerous. Immediately after inflation, they are very hot. You could getburned.

Never install any front-end equipment to your vehicle:Installation of front-end equipment, such as frontal protection bar (kangaroo bar, bullbar, push bar, or other similar devices), snowplow, or winches, is dangerous. The airbag crash sensor system could be affected. This could cause air bags to inflateunexpectedly, or it could prevent the air bags from inflating during an accident. Frontoccupants could be seriously injured.

Do not modify the suspension:Modifying the vehicle suspension is dangerous. If the vehicle's height or thesuspension is modified, the vehicle will be unable to accurately detect a collisionresulting in incorrect or unexpected air bag deployment and the possibility of seriousinjuries.

Do not modify the supplemental restraint system:Modifying the components or wiring of the supplemental restraint system isdangerous. You could accidentally activate it or make it inoperable. Do not make anymodifications to the supplemental restraint system. This includes installing trim,badges, or anything else over the air bag modules. It also includes installing extraelectrical equipment on or near system components or wiring. An Authorized MazdaDealer can provide the special care needed in the removal and installation of frontseats. It is important to protect the air bag wiring and connections to assure that thebags do not accidentally deploy, the driver seat slide position sensor and frontpassenger seat weight sensors are not damaged and that the seats retain anundamaged air bag connection.

NOTE

l When an air bag deploys, a loud inflation noise can be heard and some smoke will bereleased. Neither is likely to cause injury, however, the texture of the air bags maycause light skin injuries on body parts not covered with clothing through friction.

l Should you sell your Mazda, we urge you to tell the new owner of its air bag systemsand that familiarization with all instructions about them, from the Owner's Manual, isimportant.


SRS Air Bags

2-49


Form No.8W89-EA-06K

Black plate (64,1)

Supplemental Restraint System ComponentsThe supplemental restraint systems (SRS) have two basic subsystems:

l The air bag system with inflators and air bags.

l The electrical system with crash sensors and diagnostic module.

The air bags are mounted in the following locations:

l The steering wheel hub

l The front passenger dashboard

l The outboard sides of the front seatbacks

l The front and rear window pillars, and the roof edge along both sides

The air bags are out of sight until activated.

2-50


SRS Air Bags


Form No.8W89-EA-06K

Black plate (65,1)

qFront Air Bag System Components

(1)

(6)

(10)

(7)

(6)

(9) (5)

(4)

(3)(2)

(8)

(1) Driver seat slide position sensor (page 2-53)(2) Front seats(3) Front dual stage inflators and air bags(4) Front air bag sensor(5) Front passenger air bag deactivation indicator light (page 2-53)(6) Front seat belt pretensioner and load limiting systems (page 2-21)(7) Front passenger seat weight sensors (page 2-53)(8) Front passenger seat weight sensor control module(9) Crash sensors and diagnostic module (SAS unit)(10) Driver and front passenger seat belt buckle switches (page 2-53)


SRS Air Bags

2-51


Form No.8W89-EA-06K

Black plate (66,1)

qSide and Curtain Air Bag System Components

Sedan/5-Door

Sport Wagon

(3)

(1) (1)

(4)

(2)

(4)(3)

(1) (1)(2)

(1) Side and curtain inflators and air bags(2) Front seats(3) Crash sensors and diagnostic module (SAS unit)(4) Side crash sensor

2-52


SRS Air Bags


Form No.8W89-EA-06K

Black plate (67,1)

How the Air Bags Work

qHow the Front Air Bags Work

When air bag crash sensors detect a frontal impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the front air bags and after the inflation, the front air bagsquickly deflate.The front air bags will function only once. After that, the front air bags will not workagain and must be replaced.Only an Authorized Mazda Dealer can replace the system components.

The front, dual stage air bags control air bag inflation in two energy stages. During animpact of moderate severity the front air bags deploy with lesser energy, whereas duringmore severe impacts, they deploy with more energy. Deployment of the front air bags maydiffer between the driver and the front passenger depending on the driver seat position,front passenger weight and front seat belt usage, all of which provide data from each sensorto the air bag system.

The front air bags will deploy only in a frontal or frontal offset impact.

Driver seat slide position sensor

Your vehicle is equipped with a driver seat slide position sensor as a part of thesupplemental restraint system. The sensor is located under the driver seat. The sensordetermines whether the driver seat is fore or aft of a reference position and sends the seatposition to the diagnostic module (SAS unit). The sensor is also designed to control thedeployment of the driver air bag depending on how close the driver seat is to the steeringwheel.

The air bag/front seat belt pretensioner system warning light flashes if the sensor has apossible malfunction (page 2-61).


SRS Air Bags

2-53


Form No.8W89-EA-06K

Black plate (68,1)

Front passenger seat weight sensors

Your vehicle is also equipped with the front passenger air bag deactivation indicator light(page 2-39). These sensors are located under both of the front passenger seat rails. Thesesensors determine the total seated weight on the front passenger seat. The sensors are alsodesigned to prevent the front passenger front and side air bags and seat belt pretensionersystem from deploying if the total seated weight is less than approximately 30 kg (66 lb).

To reduce the chance of injuries caused by deployment of the front passenger air bag, thesystem deactivates the front passenger front and side air bags and also the seat beltpretensioner system when:

l There is no passenger in the front passenger seat. (The front passenger air bagdeactivation indicator light does not illuminate.)

l The total seated weight on the front passenger seat is less than approximately 30 kg (66lb). (The front passenger air bag deactivation indicator light illuminates.)

This system shuts off the front passenger front and side air bags and seat belt pretensionersystem, so make sure the front passenger air bag deactivation indicator light illuminatesaccording to the following table.

The air bag/front seat belt pretensioner system warning light flashes and the frontpassenger air bag deactivation indicator light illuminates if the sensors have a possiblemalfunction. If this happens, the front passenger front and side air bags and seat beltpretensioner system will not deploy.

Front passenger air bag deactivation indicator light

This indicator light illuminates to remind you that the front passenger front and side airbags and seat belt pretensioner will not deploy during a collision.

If the front passenger weight sensors are normal, the indicator light illuminates when theignition switch is turned to the ON position. After about 6 seconds it goes out.

2-54


SRS Air Bags


Form No.8W89-EA-06K

Black plate (69,1)

The front passenger air bag deactivation indicator light illuminates or is off under the following conditions:

Total seated weight on thefront passenger seat

Front passenger air bagdeactivation indicator light

Front passenger front andside air bags

Front passenger seatbelt pretensioner

system

Empty (Not occupied)* OFF OFF OFF

Less than approx. 30 kg(66 lb)

ON OFF OFF

Approx. 42 kg (93 lb) ormore

OFF ON ON

* If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates,however this does not indicate a malfunction.

If the front passenger air bag deactivation indicator light does not illuminate when theignition switch is turned to the ON position and does not illuminate as indicated in theabove chart, do not allow a child to sit in the front passenger seat and consult anAuthorized Mazda Dealer as soon as possible. The system may not work properly in anaccident.

WARNINGDo not decrease the total seated weight on the front passenger seat:When an adult or large child sits on the front passenger seat, decreasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 42 kg (93 lb) required for air bag deployment is dangerous. The frontpassenger seat weight sensors will detect the reduced total seated weight condition andthe front passenger front and side air bags and seat belt pretensioner system will notdeploy during an accident. The front passenger will not have the supplementaryprotection of the air bag, which could result in serious injury. Decreasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 42 kg (93 lb) could result in an air bag not deploying under thefollowing conditions, for example:l A rear passenger pushes up on the front passenger seat with the feet.l Luggage or other items placed under the front passenger seat or between the frontpassenger seat and driver seat that push up the front passenger seat bottom.

l The front passenger seat occupant sits in a manner that does not place the entireweight of the occupant on the seat such as by sitting too close to the door, graspingthe assist grip or the rim of the moonroof and sitting with the seatback reclined toofar.

l Any accessories which might decrease the total seated weight on the frontpassenger seat are attached to the front passenger seat.

The front passenger front and side air bags and seat belt pretensioner systems willdeactivate if the total seated weight on the front passenger seat is close to 30 kg (66 lb)and they will reactivate before the weight exceeds 42 kg (93 lb).


SRS Air Bags

2-55


Form No.8W89-EA-06K

Black plate (70,1)

WARNINGDo not increase the total seated weight on the front passenger seat:When an infant or small child sits on the front passenger seat, increasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 30 kg (66 lb) is dangerous. The front passenger seat weight sensors willdetect the increased total seated weight, which could result in the unexpecteddeployment of the front passenger front and side air bags and seat belt pretensionersystem in an accident and may cause serious injury. Increasing the total seated weighton the front passenger seat beyond the total seated weight of approximately 30 kg (66lb) could result in the front passenger front and side air bags and seat beltpretensioner system deployment in an accident under the following conditions, forexample:l Luggage or other items are placed on the seat with the child in the child-restraintsystem.

l A rear passenger or luggage push or pull down on the front passenger seatback.l A rear passenger steps on the front passenger seat rails with the feet.l Luggage or other items are placed on the seatback or hung on the head restraint.l The seat is washed.l Liquids are spilled on the seat.l The front passenger seat is moved backward, pushing into luggage or other itemsplaced behind it.

l The front passenger seatback contacts the rear seat.l Luggage or other items are placed between the front passenger seat and driver seat.l Any accessories which might increase the total seated weight on the front passengerseat are attached to the front passenger seat.

The front passenger front and side air bags and seat belt pretensioner systems willdeactivate if the total seated weight on the front passenger seat is close to 30 kg (66 lb)and they will reactivate before the weight exceeds 42 kg (93 lb).

2-56


SRS Air Bags


Form No.8W89-EA-06K

Black plate (71,1)

CAUTIONl To assure proper deployment of the front air bag and to prevent damage to the sensorsin the front seat bottoms:

l Do not place sharp objects on the front seat bottoms or leave heavy luggage onthem.

l Do not spill any liquids on the front seats or under the front seats.

l To allow the sensors to function properly, always perform the following:

l Adjust the front seats as far back as possible and always sit upright against theseatbacks with seat belts worn properly.

l If you place your child on the front passenger seat, secure the child-restraint systemproperly and slide the front passenger seat as far back as possible (page 2-39).

NOTE

l The system requires about 10 seconds to alternate between turning the front passengerfront and side air bags and seat belt pretensioner system on or off.

l The front passenger air bag deactivation indicator light may illuminate repeatedly ifluggage or other items are put on the front passenger seat, or if the temperature of thevehicle's interior changes suddenly.

l The front passenger air bag deactivation indicator light may illuminate for 10 secondsif the total seated weight on the front passenger seat changes.

l If the front passenger air bag deactivation indicator light does not illuminate afterinstalling a child-restraint system on the front passenger seat, install the child-restraintsystem on the rear seat and consult an Authorized Mazda Dealer as soon as possible.

Driver and front passenger buckle switches

The buckle switches on the front seat belts detect whether or not the front seat belts aresecurely fastened and further control the deployment of the air bags.


SRS Air Bags

2-57


Form No.8W89-EA-06K

Black plate (72,1)

qHow the Side and Curtain Air Bags Work

When air bag crash sensors detect a side impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the side and curtain air bags and after the inflation, the sideand curtain air bags quickly deflate.The side and curtain air bags will function only once. After that, the side and curtain airbags will not work again and must be replaced. Only an Authorized Mazda Dealer canreplace the systems.

The side and curtain air bag will deploy only on the side the vehicle receives the force of the impact.

WARNINGDo not place luggage or other objects under the front seats:Placing luggage or other objects under the front seats is dangerous. The side andcurtain air bag wiring could be damaged, and in the event of a side collision, the sideand curtain air bags may not deploy, which could result in death or serious injury. Toprevent damage to the side and curtain air bag wiring, do not place luggage or otherobjects under the front seats.

qAir Bag Activation/Deactivation

NOTE

If the front passenger seat weight sensors detect a total seated weight on the frontpassenger seat is less than approximately 42 kg (93 lb), the front passenger front and sideair bags and seat belt pretensioner may not deploy (page 2-53), but the curtain air bagsmay deploy.

2-58


SRS Air Bags


Form No.8W89-EA-06K

Black plate (73,1)

Front air bag activation

The front air bags will inflate if theseverity of impact is above the designedthreshold level.

l Hitting a solid wall straight on atgreater than about 22 km/h (14 mph).

l Hitting a curb, pavement edge or hardobject.

l Landing hard or the vehicle falling.

l Frontal impact within about a 30degree range from head-on to thevehicle.

l Driving into a big hole or hitting the farside of a hole.

Limitations to front air bag activation

Depending on the severity of impact, thefront air bags may not inflate in thefollowing cases:

l Impacts involving trees or poles causesevere cosmetic damage but may nothave enough stopping force to activatethe air bag.

l Frontal offset impact to the vehiclemay not provide the stopping forcenecessary for air bag deployment.


SRS Air Bags

2-59


Form No.8W89-EA-06K

Black plate (74,1)

l Rear-ending or running under a truck'stail gate may not provide the stoppingforce necessary for air bag deployment.

Non-activation of front air bags

Front air bags will not normally inflate inthe following cases:

l Collision from the rear.

l Impact to the side, but it may deploythe side and curtain air bags.

l Vehicle roll-over, may deploy the sideand curtain air bags but not the front airbags.

Side and curtain air bag activation

The severity of impact above the designedthreshold level to one side of the vehicle(driver or passenger side areas) will causethe side and curtain air bags on that sideto inflate, but it will not normally deploythe front air bags.

Limitations to side and curtain air bagactivation

Depending on the severity of impact, theside and curtain air bags may not inflate inthe following cases:

l Frontal offset impact may not provideenough side impact to deploy the sideand curtain air bags.

l Side impacts involving trees or polescan cause severe cosmetic damage butmay not have enough impact force toactivate the side and curtain air bags.

2-60


SRS Air Bags


Form No.8W89-EA-06K

Black plate (75,1)

l Vehicle roll-over may not provideenough side force to deploy the sideand curtain air bags.

l Side impacts with two-wheeledvehicles may not provide enough forceto deploy the side and curtain air bags.

Non-activation of side and curtain airbag

The side and curtain air bags will notnormally inflate in the following cases:

l Collision from the rear.

l Collision from the front, but it maydeploy the front air bags.

qConstant Monitoring

The following components of the air bagsystems are monitored by a diagnosticsystem:

l SAS unit

l Front air bag sensor

l Air bag modules

l Side crash sensors

l Front seat belt pretensioners

l Related wiring

l Driver seat slide position sensor

l Front passenger seat weight sensors

l Driver and front passenger seat beltbuckle switches

The diagnostic module continuouslymonitors the system's readiness. Thisbegins when the ignition switch is turnedto the ON position and continues whilethe vehicle is being driven.

qAir Bag/Front Seat BeltPretensioner System Warning Light

If the air bag/front seat belt pretensionersystem is normal, the warning lightilluminates when the ignition switch isturned to the ON position or after theengine is cranked. The warning light turnsoff after a specified period of time.


SRS Air Bags

2-61


Form No.8W89-EA-06K

Black plate (76,1)

A system malfunction is indicated whenthe warning light constantly flashes,constantly illuminates or doesn'tilluminate at all when the ignition switchis turned to the ON position. If any ofthese occur, consult an Authorized MazdaDealer as soon as possible. The systemmay not work in an accident.


qMaintenance

The air bag systems do not require regularmaintenance. But if any of the followingoccurs, take your vehicle to an AuthorizedMazda Dealer as soon as possible:

l The air bag system warning lightflashes.

l The air bag system warning lightremains illuminated.

l The air bag system warning light doesnot illuminate when the ignition switchis turned to the ON position.

l The air bags have deployed.

l Front passenger air bag deactivationindicator light does not illuminatewhen the ignition switch is turned tothe ON position or does not illuminateas indicated in the chart. For moredetails about this indicator light andthis chart, refer to “Front passengerseat weight sensors” (page 2-53).

WARNINGDo not operate a vehicle with damagedair bag/seat belt pretensioner systemcomponents:Expended or damaged air bag/seatbelt pretensioner system componentsmust be replaced after any collisionwhich caused them to deploy ordamage them. Only a trainedAuthorized Mazda Dealer can fullyevaluate these systems to see that theywill work in any subsequent accident.Driving with an expended or damagedair bag or pretensioner unit will notafford you the necessary protection inthe event of any subsequent accidentwhich could result in serious injury ordeath.

Do not remove interior air bag parts:Removing any components such as thefront seats, front dashboard, thesteering wheel or parts on the frontand rear window pillars and along theroof edge, containing air bag parts orsensors is dangerous. These partscontain essential air bag components.The air bag could accidentally activateand cause serious injuries. Alwayshave an Authorized Mazda Dealerremove these parts.

2-62


SRS Air Bags


Form No.8W89-EA-06K

Black plate (77,1)

WARNINGDispose of the air bag properly:Improper disposal of an air bag or avehicle with live air bags in it can beextremely dangerous. Unless all safetyprocedures are followed, injury canresult. Ask an Authorized MazdaDealer how to safely dispose of an airbag or how to scrap an air bagequipped vehicle.

NOTE

If it becomes necessary to have thecomponents or wiring system for thesupplementary restraint systemmodified to accommodate a person withcertain medical conditions inaccordance with a certified physician,contact an Authorized Mazda Dealer,refer to “Customer Assistance (U.S.A.)”(page 9-2).


SRS Air Bags

2-63


Form No.8W89-EA-06K

Black plate (78,1)

2-64


Form No.8W89-EA-06K

Black plate (79,1)

3 Knowing Your Mazda

Explanation of basic operations and controls; opening/closing and adjustmentof various parts.

Doors and Locks ........................................................................... 3-2Keys .......................................................................................... 3-2Keyless Entry System ............................................................... 3-3Door Locks ............................................................................... 3-9Hatch (5-Door) ........................................................................ 3-12Liftgate (Sport Wagon) ........................................................... 3-14Trunk Lid (Sedan) ................................................................... 3-20Inside Trunk Release Lever (Sedan) ....................................... 3-22Power Windows ...................................................................... 3-23Fuel-Filler Lid and Cap ........................................................... 3-30Hood ....................................................................................... 3-32Moonroofí ............................................................................. 3-33

Security System ........................................................................... 3-35Immobilizer System ................................................................ 3-35Theft-Deterrent Systemí ........................................................ 3-38

Steering Wheel and Mirrors ...................................................... 3-40Steering Wheel ........................................................................ 3-40Mirrors .................................................................................... 3-40

3-1íSome models.


Form No.8W89-EA-06K

Black plate (80,1)

Keys

WARNINGDo not leave the keys in your vehiclewith children and keep them in a placewhere your children will not find orplay with them:Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. These new kinds of keys arefascinating to children. They couldplay with power windows or othercontrols, or even make the vehiclemove.

NOTE

l Refer to Immobilizer System (page3-35) for information regarding keysand engine starting.

l (With theft-deterrent system)Refer to Theft-Deterrent System(page 3-38) for informationregarding keys and the prevention ofvehicle and vehicle contents theft.

The keys operate all locks.

Key code number plate

Retractabletype key

A code number is stamped on the plateattached to the key set; detach this plateand store it in a safe place (not in thevehicle) for use if you need to make areplacement key.

NOTE

Write down the code number and keepit in a separate safe and convenientplace, but not in the vehicle.If your key is lost, consult yourAuthorized Mazda Dealer and haveyour code number ready.

Key extend/retract method (Retractabletype key)

To extend the key, press the releasebutton.

3-2

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (81,1)

To retract the key, rotate it into the holderwhile pressing the release button. Keyless Entry System

This system remotely locks and unlocksthe doors and the hatch/liftgate, and opensthe trunk lid, and opens the powerwindows.It can also help you signal for attention.Press the buttons slowly and carefully.

CAUTIONTo avoid damage to the transmitter, donot:

l Drop the transmitter.

l Get the transmitter wet.

l Expose the transmitter to any kind ofmagnetic field.

l Expose the transmitter to hightemperatures on places such as thedashboard or hood, under directsunlight.

Knowing Your Mazda

Doors and Locks

3-3


Form No.8W89-EA-06K

Black plate (82,1)

NOTE

l The keyless entry system is designedto operate up to about 2.5 m (8 ft)from the center of the vehicle, butthis may vary due to localconditions.

l The system doesn't operate when thekey is in the ignition switch.

l Doors and the hatch/liftgate can belocked by pressing the lock buttonwhile any other door or the hatch/liftgate/trunk lid is open. However,the hazard warning lights will notflash.

l If the transmitter does not operatewhen pressing a button or theoperation range becomes too small,the battery may be dead. To install anew battery, refer to Maintenance(page 3-6).

l Additional transmitters can beobtained at an Authorized MazdaDealer. Up to 3 transmitters can beused with the keyless entry systemper vehicle. Bring all transmitters toan Authorized Mazda Dealer whenadditional transmitters are required.

qTransmitter

Sedan

Lock button

Unlock button

Trunk button

Panic button

Operationindicator light

5-Door/Sport Wagon

Lock button

Unlock button

Panic button

Operationindicator light

3-4

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (83,1)

NOTE

l (U.S.A.)This device complies with Part 15 ofthe FCC Rules. Operation is subjectto the following two conditions: (1)this device may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.

l (CANADA)This device complies with RSS-210of Industry CANADA. Operation issubject to the following twoconditions: (1) this device may notcause interference, and (2) thisdevice must accept any interference,including interference that may causeundesired operation of the device.

NOTE

The unlock button can be used to openthe power windows, but the lock buttoncannot be used to close the powerwindows. Refer to Opening/Closing thePower Windows from Outside (page3-28).

The operation indicator light flashes whenthe buttons are pressed.

Lock button

To lock the doors and the hatch/liftgate,press the lock button and the hazardwarning lights will flash once.

To confirm that all doors and the hatch/liftgate have been locked, press the lockbutton again within 5 seconds. If they areclosed and locked, the horn will sound.

NOTE

(Without theft-deterrent system)The hazard warning lights will flashonce to indicate that all doors and thehatch/liftgate are locked.(With theft-deterrent system)

l The hazard warning lights will notflash.

l The hazard warning lights only flashwhen the theft deterrent system isarmed or turned off, refer to thetheft-deterrent system (page 3-38).

NOTE

l All doors and the hatch/liftgatecannot be locked when the key is inthe ignition switch.

l Confirm that all doors and the hatch/liftgate are locked visually or audiblyby use of the double click.

Unlock button

To unlock the driver's door, press theunlock button and the hazard warninglights will flash twice.

To unlock all doors and the hatch/liftgate,press the unlock button again within 5seconds.

Knowing Your Mazda

Doors and Locks

3-5


Form No.8W89-EA-06K

Black plate (84,1)

NOTE

(Without theft-deterrent system)The hazard warning lights will flashtwice to indicate that all doors and thehatch/liftgate are unlocked.(With theft-deterrent system)

l The hazard warning lights will notflash.

l The hazard warning lights only flashwhen the theft deterrent system isarmed or turned off, refer to thetheft-deterrent system (page 3-38).

NOTE

After unlocking with the transmitter, alldoors and the hatch/liftgate willautomatically lock if one of the doors orthe hatch/liftgate/trunk lid is not openedwithin about 30 seconds.

Trunk button

To open the trunk, press and hold thetrunk button until the trunk lid opens.

Panic button

If you witness from a distance someoneattempting to break into or damage yourvehicle, pressing the panic button willactivate the vehicle's alarm.

NOTE

The panic button will work whether anydoor or the trunk lid is open or closed.

Turning on the alarm

Pressing the panic button for 1 second ormore will trigger the alarm for about 2minutes and 30 seconds, and thefollowing will occur:

l The horn sounds intermittently.

l The hazard warning lights flash.

Turning off the alarm

Press any button on the transmitter.

qTransmitter Maintenance

If the buttons on the transmitter areinoperable and the operation indicatorlight does not flash, the battery may bedead.Replace with a new battery before thetransmitter becomes unusable.

3-6

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (85,1)

CAUTIONl Install the battery with the positivepole ( ) facing down. Batteryleakage could occur if it is notinstalled correctly.

l When replacing the battery, becareful not to bend the electricalterminals or get oil on them. Also becareful not to get dirt in thetransmitter as it could be damaged.

l There is the danger of explosion ifthe battery is not correctly replaced.

l Replace only with the same typebattery (CR1620 or equivalent).

l Dispose of used batteries accordingto the following instructions.

l Insulate the plus and minusterminals of the battery usingcellophane or equivalent tape.

l Never disassemble.l Never throw the battery into fire

and/or water.l Never deform or crush.

Replacing the transmitter battery

1. Unfold the key (page 3-2).

2. Insert a small screwdriver into the slotand push the tab to remove the keyfrom the transmitter.

Tab

3. Insert a small screwdriver into the slotand gently pry open the transmitter.

4. Press the portion of the batteryindicated by A and remove the battery.

A

Knowing Your Mazda

Doors and Locks

3-7


Form No.8W89-EA-06K

Black plate (86,1)

NOTE

If it is difficult to remove the battery bypressing with a finger, use a smallscrewdriver to press out the battery.

5. Put in the new battery (CR1620 orequivalent) with the positive pole ( )facing down.

6. Align the front and back covers andsnap the transmitter shut.

7. Install the key to the transmitter.

qService

If you have a problem with the keylessentry system, consult an AuthorizedMazda Dealer.

If your transmitter is lost or stolen, bringall remaining transmitters to anAuthorized Mazda Dealer as soon aspossible for a replacement and to makethe lost or stolen transmitter inoperative.

CAUTIONRadio equipment like this is governedby laws in the United States.Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user'sauthority to operate the equipment.

3-8

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (87,1)

Door Locks

WARNINGAlways take all children and pets withyou or leave a responsible person withthem:Leaving a child or a pet unattended ina parked vehicle is dangerous. In hotweather, temperatures inside a vehiclecan become high enough to causebrain damage or even death.

Do not leave the keys in your vehiclewith children and keep them in a placewhere your children will not find orplay with them:Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. They could play with powerwindows or other controls, or evenmake the vehicle move.

Keep all doors locked when driving:Unlocked doors in a moving vehicleare dangerous. Passengers can fall outif a door is accidentally opened andcan more easily be thrown out in anaccident.

WARNINGAlways close all the windows, lock thedoors and take the key with you whenleaving your vehicle unattended:(Except sedan)Leaving your vehicle unlocked isdangerous as children could lockthemselves in a hot vehicle, whichcould result in death. Also, a vehicleleft unlocked becomes an easy targetfor thieves and intruders.(Sedan)Leaving your vehicle unlocked isdangerous as children could lockthemselves in a hot vehicle, or becometrapped by climbing into the trunk,which could result in death. Also, avehicle left unlocked becomes an easytarget for thieves and intruders.

qLocking, Unlocking with Key

The driver's door can be locked/unlockedwith the key.Turn the key toward the front to unlock,toward the back to lock.

Lock

Unlock

Knowing Your Mazda

Doors and Locks

3-9


Form No.8W89-EA-06K

Black plate (88,1)

qLocking, Unlocking with Transmitter

The doors can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3).

qLocking, Unlocking with Door-Lock Knob

To lock any door from the inside, push thedoor-lock knob.To unlock, pull it out.This does not operate the other doorlocks.

Lock

Unlock

To lock any door with the door-lock knobfrom the outside, push the door-lock knobto the lock position and close the door.This does not operate the other doorlocks.

Door-lock knob

NOTE

l Lockout prevention keeps you fromlocking the driver's door with the keyin the ignition switch.If you try to lock the driver's doorwhen the key is in the ignition switchand any door is open, the door lockimmediately unlocks.

l When locking the doors this way, becareful not to leave the key inside thevehicle.

qPower Door Locks

Vehicle lock-out prevention

The vehicle lock-out prevention featureprevents you from locking yourself out ofthe vehicle. With the key in the ignitionswitch, all doors and the hatch/liftgate willautomatically unlock if they are lockedusing the power door locks with any dooropen.

Locking, unlocking with key

All doors and the hatch/liftgate lockautomatically when the driver's door islocked with the key. All doors and thehatch/liftgate unlock when the driver'sdoor is unlocked and the key is held in theunlock position for one second or longer.

Lock

Unlock

3-10

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (89,1)

NOTE

Holding the key in the unlockedposition in the driver's door lock forabout a second unlocks all doors andthe hatch/liftgate. To unlock only thedriver's door, insert the key into thedriver's door lock and turn the keybriefly to the unlock position and thenimmediately return it to the centerposition.

Locking, unlocking with door-lockswitch

All doors and the hatch/liftgate lockautomatically when LOCK is pushed.They all unlock when the unmarked partof the door-lock switch is pushed.

Lock

Unlock

qRear Door Child Safety Locks

These locks are intended to help preventchildren from accidentally opening therear doors. Use them both whenever achild rides in the vehicle.

If you slide the child safety lock to thelock position before closing that door, thedoor cannot be opened from the inside.The door can be opened only by pullingthe outside handle.

Unlock

Lock

Knowing Your Mazda

Doors and Locks

3-11


Form No.8W89-EA-06K

Black plate (90,1)

Hatch (5-Door)

WARNINGNever allow a person to ride in thehatch area:Allowing a person to ride in the hatcharea is dangerous. The person in thehatch area could be seriously injuredor killed during sudden braking or acollision.

Keep the hatch closed when driving:Exhaust gas entering the cabin of avehicle through an open hatch isdangerous. This gas contains CO(carbon monoxide), which is colorless,odorless, and highly poisonous. Ifinhaled, it can cause loss ofconsciousness and death.


The hatch can be locked/unlocked byinserting the key into the driver's door keyslot, refer to Power Door Locks (page3-10).


The hatch can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3).

qLocking, Unlocking with Door-Lock Switch

The hatch can be locked/unlocked byoperating the door-lock switch, refer toPower Door Locks (page 3-10).

qOpening and Closing the Hatch

To open the hatch, pull up on the handle.

NOTE

If the vehicle battery is dead or there isa malfunction in the electrical systemand the hatch cannot be unlocked,perform the following manualprocedure as an emergency measure tounlock it:

1. Remove the cap on the interiorsurface of the hatch with a flatheadscrewdriver.

Cap

3-12

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (91,1)

NOTE

2. Turn the lever to the right to unlockthe hatch.

Lever

After performing this emergencymeasure, have the vehicle inspected atan Authorized Mazda Dealer as soon aspossible.

To close, use both hands to push the hatchdown until the lock snaps shut. Do notslam it. Pull up on the hatch to make sureit is secure.

qLuggage Strap

The luggage compartment can beaccessed by opening the hatch when thestraps are attached to the sides of thehatch.

Strap

qLuggage Compartment Cover

WARNINGDon't place anything on top of thecover:Placing luggage or other cargo on topof the luggage compartment cover isdangerous. During sudden braking ora collision, the cargo could become aprojectile that could hit and injuresomeone.

This cover can be removed for moreroom. To do this, just unfasten the straps;then lift and pull it out.

Knowing Your Mazda

Doors and Locks

3-13


Form No.8W89-EA-06K

Black plate (92,1)

Liftgate (Sport Wagon)

WARNINGNever allow a person to ride in theluggage compartment:Allowing a person to ride in theluggage compartment is dangerous.The person in the luggagecompartment could be seriouslyinjured or killed during suddenbraking or a collision.

Do not drive with the liftgate open:Exhaust gas in the cabin of a vehicleis dangerous. An open liftgate in amoving vehicle will cause exhaust gasto be drawn into the cabin. This gascontains CO (carbon monoxide),which is colorless, odorless, andhighly poisonous, and it can causeloss of consciousness and death.Moreover, an open liftgate could causeoccupants to fall out in an accident.


The liftgate can be locked/unlocked byinserting the key into the driver's door keyslot, refer to Power Door Locks (page3-10).


The liftgate can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3).

qLocking, Unlocking with Door-Lock Switch

The liftgate can be locked/unlocked byoperating the door-lock switch, refer toPower Door Locks (page 3-10).

qOpening and Closing the Liftgate

Opening the liftgate

Pull up on the handle.

3-14

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (93,1)

NOTE

If the vehicle battery is dead or there isa malfunction in the electrical systemand the liftgate cannot be unlocked,perform the following procedure as anemergency measure to unlock it:

1. Remove the cap on the interiorsurface of the liftgate with a flatheadscrewdriver.

Cap

2. Turn the lever to the right to unlockthe liftgate.

Lever

After performing this emergencymeasure, have the vehicle inspected atan Authorized Mazda Dealer as soon aspossible.

Closing the liftgate

Use both hands to push the liftgate downuntil the lock snaps shut. Do not slam it.Pull up on the liftgate to make sure it issecurely latched.

qLuggage Compartment Cover

Use the luggage compartment cover toconceal cargo or luggage.

WARNINGDo not place anything on top of theluggage compartment cover:Placing luggage or other cargo on topof the luggage compartment cover isdangerous. During sudden braking ora collision, the cargo could become aprojectile that could hit and injuresomeone.

CAUTIONMake sure the luggage compartmentcover is firmly secured. If it is notfirmly secured, it could unexpectedlydisengage resulting in injury.

Installing the cover

1. Set the left end of the retainer bar intothe notch on the left side of the luggagecompartment.

Retainer bar

Notch

Knowing Your Mazda

Doors and Locks

3-15


Form No.8W89-EA-06K

Black plate (94,1)

2. Set the right side of the retainer baronto the retainer loop on the right sideof the luggage compartment.

Retainerloop

3. Slowly pull out the cover towards youand insert the cover ends into the hookretainers at the rear of the vehicle.

Hookretainer

Removing the cover

1. Remove the cover ends from the hookretainers and slowly roll up the cover.

NOTE

To fully retract and protect the cover,guide the cover all the way into theretainer.

Tab

2. Press and hold the button on the rightside of the retainer bar and lift the bar.

Button

3. Remove the left end of the retainer barfrom the notch.

3-16

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (95,1)

qLuggage Compartment Net

The luggage compartment net can be usedas a compartment separator or to keepanimals in the back.

CAUTIONMake sure the net is firmly secured. If itis not firmly secured, it couldunexpectedly disengage resulting ininjury.

NOTE

The width of the net anchors can beshortened by pushing both sidesinward.

Net anchor

Dividing the luggage compartmentfrom the rear seat

WARNINGDo not use the luggage compartmentnet to secure objects in the luggagecompartment or the rear seat area:Using the luggage compartment net tosecure objects in the luggagecompartment or the rear seat area isdangerous. The luggage compartmentnet is not designed to hold objects inplace that could fly forward in afrontal collision. Unsecured objectsthat are thrown around the inside ofthe vehicle could cause injury tooccupants. This is particularly true forobjects stacked above the seatbacklevel. Never stack objects above theseatback level. If the luggagecompartment is divided from the rearseat, pull the luggage compartmentcover over the cargo in the luggagecompartment.


To install the net:

1. Install the retainer bar in the luggagecompartment.

Knowing Your Mazda

Doors and Locks

3-17


Form No.8W89-EA-06K

Black plate (96,1)

2. Slowly pull out the net in the upwarddirection, insert the left and right netanchors into the ceiling retainers, andslide them to the position indicated inthe figure.

Netanchor

Net

To remove the net:

1. Lift the net slightly and disengage theanchors from the ceiling retainers.

2. Slowly lower and support the net as itrolls up into the retainer bar.

CAUTIONWhen disengaging the net anchors, holdthe top of the net firmly in your hand. Ifyou lose control of the net, it willautomatically roll up in an uncontrolledmanner and could cause injury.

Dividing the luggage compartmentfrom the front seats

WARNINGDo not use the luggage compartmentnet to secure objects in the luggagecompartment or the rear seat area:Using the luggage compartment net tosecure objects in the luggagecompartment or the rear seat area isdangerous. The luggage compartmentnet is not designed to hold objects inplace that could fly forward in afrontal collision. Unsecured objectsthat are thrown around the inside ofthe vehicle could cause injury tooccupants. This is particularly true forobjects stacked above the seatbacklevel. Never stack objects above theseatback level. If the luggagecompartment is divided from the rearseat, pull the luggage compartmentcover over the cargo in the luggagecompartment.


CAUTIONMoving the rear seatbacks with theretainer bar mounted could scratch theinterior of the vehicle. The retainer barmust be removed from the back of theseatbacks before raising the seatbacks.

3-18

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (97,1)

To install the net:

1. Fold down the rear seatback (page2-12).

2. Remove the retainer bar from the rearseatback position.

3. Insert the retainer bar anchors into theleft side of each rear seatback retainer(back of the seatback).

Retainer bar

Rear seatRetainer

4. Slide the retainer bar in the directionindicated in the figure, and engage theanchors into the seatback retainers.

Retainer bar

5. Slowly pull out the net in the upwarddirection, insert the left and right netanchors into the ceiling retainers, andslide them to the position indicated inthe figure.

Netanchor

Net

To remove the net:

1. Lift the net slightly and disengage thenet anchors from the ceiling retainers.

2. Slowly lower and support the net as itrolls up into the retainer bar.

3. Remove the retainer bar in the reverseorder of installation.

CAUTIONWhen disengaging the net anchors, holdthe top of the net firmly in your hand. Ifyou lose control of the net, it willautomatically roll up in an uncontrolledmanner and could cause injury.

Knowing Your Mazda

Doors and Locks

3-19


Form No.8W89-EA-06K

Black plate (98,1)

Trunk Lid (Sedan)

WARNINGNever allow a person to ride in thetrunk:Allowing a person to ride in the trunkis dangerous. In addition, the personin the trunk could be seriously injuredor killed during sudden braking or acollision.

Keep the trunk closed when driving:Exhaust gas entering the cabin of avehicle through an open trunk isdangerous. This gas contains CO(carbon monoxide), which is colorless,odorless, and highly poisonous. Ifinhaled, it can cause loss ofconsciousness and death.

qOpening and Closing the Trunk Lid

WARNINGClose the trunk lid, lock the rearseatbacks and do not allow children toplay inside the vehicle:Leaving the trunk lid open or leavingchildren in the vehicle with the keys isdangerous. Children could open thetrunk lid and climb inside resulting inpossible injury or death from heatexposure.

Always keep the car from being atempting place to play by locking rearseats, doors and the trunk, andkeeping the keys where children cannot play with them:Leaving children or animalsunattended in a parked vehicle isdangerous. Babies left sleeping andchildren who lock themselves in carsor trunks can die very quickly fromheat prostration. Do not leave yourchildren or pets alone in a car at anytime. Do not leave the car, the rearfolding seats or the trunk unlocked.

CAUTIONFor vehicles equipped with a rearspoiler, do not lift the trunk lid by thespoiler. Lifting up the trunk lid by therear spoiler could cause damage to therear spoiler and the trunk lid.

3-20

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (99,1)

Opening the trunk lid with the key

Insert the key into the slot and turn itclockwise.

Open

Opening the trunk lid with thetransmitter

The trunk lid can be opened by operatingthe keyless entry system transmitter, referto Keyless Entry System (page 3-3).

Opening the trunk lid with the remoterelease button

Push the release button.

Closing the trunk lid

Use both hands to push the trunk lid downuntil the lock snaps shut. Do not slam it.Pull up on the trunk lid to make sure it issecure.

qTrunk Light

The trunk light is on when the lid is openand off when it's closed.

NOTE

To prevent the battery from beingdischarged, do not leave the trunk openfor a long period when the engine is notrunning.

Knowing Your Mazda

Doors and Locks

3-21


Form No.8W89-EA-06K

Black plate (100,1)

Inside Trunk ReleaseLever (Sedan)

Your vehicle is equipped with an insidetrunk release handle that provides a meansof escape for children and adults in theevent they become locked inside thetrunk.

No matter how careful adults might bewith keys and locking their cars, parentsshould be aware that children may betempted to play around vehicles and usethe trunk as a hiding place.

Adults are advised to familiarizethemselves with the operation andlocation of the inside release handle sothat all children can be told about it in anappropriate way, keeping in mind thatmost vehicles don't have such handles.

WARNINGClose the trunk lid, lock the rearseatbacks and do not allow children toplay inside the vehicle:Leaving the trunk lid open or leavingchildren in the vehicle with the keys isdangerous. Children could open thetrunk lid and climb inside resulting inpossible injury or death from heatexposure.

Always keep the car from being atempting place to play by locking rearseats, doors and the trunk, andkeeping the keys where children cannot play with them:Leaving children or animalsunattended in a parked vehicle isdangerous. Babies left sleeping andchildren who lock themselves in carsor trunks can die very quickly fromheat prostration. Do not leave yourchildren or pets alone in a car at anytime. Do not leave the car, the rearfolding seats or the trunk unlocked.

3-22

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (101,1)

qOpening the Trunk Lid from theInside

Slide the inside trunk release lever in thedirection of the arrow. The lever is madeof material that will glow for hours in thedarkness of the trunk following a briefexposure to ambient light.

The inside trunk release lever is locatedon the inside of the trunk lid.

Power WindowsThe ignition switch must be in the ONposition for the power windows tooperate.

WARNINGMake sure the opening is clear beforeclosing a window:Closing power windows aredangerous. A person's hands, head, oreven neck could be caught by thewindow and result in serious injury oreven death.This warning applies especially tochildren.

Always lock all passenger powerwindows with the power window lockswitch on the driver's side whilechildren are in the vehicle, and neverallow children to play with powerwindow switches:Leaving the power window switchesunlocked while children are in thevehicle is dangerous. Power windowswitches that are not locked with thepower window lock switch would allowchildren to operate power windowsunintentionally which could result inserious injury if a child's hands, heador neck becomes caught by thewindow.

CAUTIONTo prevent burning out the fuse anddamaging the power window system,do not open or close more than threewindows at once.

Knowing Your Mazda

Doors and Locks

3-23


Form No.8W89-EA-06K

Black plate (102,1)

qOperating the Front Power Windows

NOTE

l Each passenger power window canbe operated with each door switchwhen the power window lock switchon the driver's door is in theunlocked position (page 3-28).

l Each passenger power window canalso be operated by the powerwindow master control switches onthe driver's door.

Master control switchesDriver's window

Left rear window

Front passenger's window

Right rear window

l The following functions can beperformed for the front powerwindows using the power windowmaster control switches on thedriver's door or front passenger'sdoor switch.

l Manual opening/closingl Auto-opening/closingl Two-step down function

Manual opening/closing

To open a power window to the desiredposition, lightly hold down the switch.To close the power window to the desiredposition, lightly pull up the switch.

Open

Close

Master control switches

Driver's window


Open

Close

Front passenger switch

Auto-opening/closing

To fully open a power windowautomatically, press the switch completelydown.To fully close the power windowautomatically, pull the switch completelyup.

To stop the power window partway, pullor press the switch in the oppositedirection and then release it.

3-24

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (103,1)

NOTE

If the battery was disconnected duringvehicle maintenance, or for otherreasons such as a switch continues to beoperated after the window is fully open/close, the power windows will not fullyopen and close automatically. Re-initialization of the automatic functionon the front passenger's power windowcannot be performed using the mastercontrol switches. Carry out thefollowing procedure on each doorswitch to resume operation:

1. Turn the ignition switch to the ONposition.

2. Make sure that the power windowlock switch located on the driver'sdoor is not depressed.

3. Press the switch and fully open thepower window.

4. Pull up the switch to fully close thepower window and continue holdingthe switch for about 2 seconds afterthe window fully closed.

5. Repeat steps 3-4 for the frontpassenger power window whileseated in the front passenger seat.

6. Make sure that the power windowsoperate correctly using the doorswitches.

Two-step down function

With the power window completelyclosed, press the switch lightly and it willopen and stop about 3 cm (1 in) from thetop.If you continue to press and hold theswitch, the window will resume openingall the way.

NOTE

Pressing the power window switch oncewhen the window is fully closed willonly open it about 3 cm (1 in) to allowconvenient ventilation of the cabin.

Canceling the two-step down function

To cancel the two-step down function forthe front power windows, carry out thefollowing procedure using the mastercontrol switches.

1. Turn the ignition switch to the ONposition and complete the followingprocedure within 5 seconds:Press the power window switch 2 timesfirmly, then pull it 2 times firmly.

Master control switches

Driver's window


2. Turn the ignition switch to the LOCKposition.

3. With the ignition switch in the LOCKposition, and within 40 seconds, turnthe ignition switch to the ON positionand complete the following procedurewithin 5 seconds:Press the power window switch 2 timesfirmly, then pull 2 times firmly.

Knowing Your Mazda

Doors and Locks

3-25


Form No.8W89-EA-06K

Black plate (104,1)

NOTE

l The two-step down function cannotbe canceled if the procedure is notcompleted within the specified times,or the procedure is changed alongthe way. To redo the procedure, firstturn the ignition switch to the LOCKposition and proceed from thebeginning.

l If you are unable to cancel thefunction despite carrying out thecancellation procedure, consult anAuthorized Mazda Dealer.

Restoring the two-step down function

With the two-step down function in thecanceled state, repeat the previousprocedure for canceling the function oneach door switch and it will be restored.

NOTE

If you are unable to restore the functiondespite doing the restore procedure,consult an Authorized Mazda Dealer.

Jam-safe window

If a person's hands, head or an objectblocks the window during the manualclosing operation or the auto-closingoperation, the window will stop and openhalfway.

WARNINGMake sure nothing blocks the windowjust before it reaches the fully closedposition or while fully holding up thepower window switch:Blocking the power window justbefore it reaches the fully closedposition or while fully holding up thepower window switch is dangerous.In this case, the jam-safe functioncannot prevent the window fromstopping. If fingers are caught, seriousinjuries could occur.

NOTE

Depending on driving conditions, aclosing power window could stop andstart opening when the window feels ashock that is similar to somethingblocking it.In the event the jam-safe functionactivates and the power window cannotbe closed automatically, pull and holdthe switch fully and the window willclose.

Engine-off power window operation

The power window can be operated forabout 40 seconds after the ignition switchis turned from the ON position to theACC or LOCK position with all doorsclosed. If either front door is opened, thepower window will be inoperable.

3-26

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (105,1)

NOTE

l For engine-off operation of thepower window, the switch must beheld up firmly throughout windowclosure because the auto-closingfunction will be inoperable.

l The two-step down function isinoperable during engine-offoperation.

qOperating the Rear Power Windows

The power windows may be operatedwhen the power window lock switch onthe driver's door is in the unlockedposition.

A rear power windows may be opened orclosed using the power window mastercontrol switches on the driver's door.

Left rear window

Power window lock switch

Right rear window

To open the power window to the desiredposition, hold down the switch.To close the power window to the desiredposition, pull up the switch.

Close

Open

Engine-off power window operation

The power windows can be operated forabout 40 seconds after the ignition switchis turned from the ON position to theACC or LOCK position with all doorsclosed. If either front door is opened, thepower windows will be inoperable.

Knowing Your Mazda

Doors and Locks

3-27


Form No.8W89-EA-06K

Black plate (106,1)

qPower Window Lock Switch

With the lock switch in the unlockedposition, all power windows on each doorcan be operated.

With the lock switch in the lockedposition, only the driver's side powerwindow can be operated.

Locked position

Unlocked position

WARNINGUnless a passenger needs to operate apower window, keep the power windowlock switch in the locked position:Unintentional power windowoperation is dangerous. A person'shands, head, or neck could be caughtby the window and result in seriousinjury.

NOTE

When the power window lock switch isin the locked position, the light on frontpassenger's power window switch turnsoff. The light may be difficult to seedepending on the surroundingbrightness.

qOpening/Closing the PowerWindows from Outside

The front power windows can be openedor closed from outside the vehicle afterthe doors and the hatch/liftgate/trunk lidare closed.The front power windows may beoperated when the power window lockswitch on the driver's door is in the lockor unlocked position.

WARNINGMake sure the opening is clear beforeclosing a window:Closing power windows aredangerous. A person's hands, head, oreven neck could be caught by thewindow and result in serious injury oreven death.This warning applies especially tochildren.

NOTE

The power windows cannot be openedor closed from outside the vehicle underthe following condition:

l A door or the hatch/liftgate/trunk lidis opened.

l The key is inserted into the ignitionswitch.

Opening

Because nobody likes getting into a veryhot car, Mazda has introduced a way toopen the two front windows as youapproach the vehicle to get the air movingbefore you get in.

3-28

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (107,1)

WARNINGUse the auto-window function onlywhen you can see the vehicle and it isin a secure area:Do not let children play with yourkeys. If they open the window withoutyour knowing, the open windows arean even bigger invitation to a thiefthan leaving the doors unlocked.

The windows can be opened forventilating the cabin before getting in thevehicle.

With unlock button (Keyless entrysystem)

Press once, then press again within 1.5seconds and hold.After the doors and the hatch/liftgate/trunk lid are unlocked, the two frontwindows open while the unlock button ispressed.To stop the windows while opening,release the button.If the operation is performed from thebeginning again, the windows open.Sedan

Lock button

Unlock button

Trunk button

Panic button

5-Door/Sport Wagon

Lock button

Unlock button

Panic button

NOTE

l The unlock button does not operateunless it is pressed twicesequentially.

l The lock button cannot be used toclose the power windows.

With key

1. Insert the key in the driver's door keycylinder.

2. Turn the key toward the front and holdit. After the doors and the hatch/liftgate/trunk lid are unlocked, thewindows fully open automatically.

Open

Knowing Your Mazda

Doors and Locks

3-29


Form No.8W89-EA-06K

Black plate (108,1)

To stop this operation, turn the key to thecenter position, then turn it toward thefront again.

NOTE

The window opening operation also canbe stopped by turning the key towardthe back. However, the doors and thehatch/liftgate/trunk lid will lock.

Closing

The windows can be closed in case theyare left open after getting out of thevehicle.

With key

1. Insert the key in the driver's door keycylinder.

2. Turn the key toward the back and holdit. After the doors and the hatch/liftgate/trunk lid are locked, thewindows close as long as the key isturned.

Close

Fuel-Filler Lid and Cap

WARNINGWhen removing the fuel cap, loosenthe cap slightly and wait for anyhissing to stop. Then remove it:Fuel spray is dangerous. Fuel canburn skin and eyes and cause illness ifingested. Fuel spray is released whenthere is pressure in the fuel tank andthe fuel cap is removed too quickly.

Before refueling, stop the engine, andalways keep sparks and flames awayfrom the filler neck:Fuel vapor is dangerous. It could beignited by sparks or flames causingserious burns and injuries.Additionally, use of the incorrect fuelfiller cap or not using a fuel filler capmay result in fuel leak, which couldresult in serious burns or death in anaccident.

CAUTIONAlways use only a genuine Mazda fuelcap or an approved equivalent,available at an Authorized MazdaDealer. The wrong cap can result in aserious malfunction of the fuel andemission control systems. It may alsocause the check engine light in theinstrument cluster to illuminate.

3-30

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (109,1)

qFuel-Filler Lid

To open, pull up the remote fuel-filler lidrelease.

Remote fuel-filler lid release

qFuel-Filler Cap

To remove the filler cap, turn itcounterclockwise.

To close the filler cap, turn it clockwiseuntil it clicks.

Close

Open

CAUTIONMake sure the fuel-filler cap istightened securely. The check enginelight may illuminate when the cap isn'ttightened securely. If the light remainson (even after you have tightened thecap securely, driven, and restarted theengine several times), it may indicate adifferent problem. Contact anAuthorized Mazda Dealer as soon aspossible.

Knowing Your Mazda

Doors and Locks

3-31


Form No.8W89-EA-06K

Black plate (110,1)

Hood

WARNINGAlways check that the hood is closedand securely locked:A hood that is not closed and securelylocked is dangerous as it could flyopen while the vehicle is moving andblock the driver's vision which couldresult in a serious accident.

qOpening the Hood

1. With the vehicle parked, pull therelease handle to unlock the hood.

2. Slide the hood latch to the right and liftthe hood.

3. Grasp the support rod and secure it inthe stay hole indicated by the arrow tohold the hood open.

ClipSupport rod

qClosing the Hood

1. Check under the hood area to makecertain all filler caps are in place andall loose items (e.g. tools, oilcontainers, etc.) have been removed.

2. Insert the support rod in its clip whileholding up the hood. Verify that thesupport rod is secured in the clip beforeclosing the hood.

3. Close the hood so that it locks securely.

3-32

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (111,1)

Moonroofí

The moonroof can be opened or closedelectrically only when the ignition switchis in the ON position.

Tilt switch

Slide switch

WARNINGDo not let passengers stand up orextend part of the body through theopen moonroof while the vehicle ismoving:Extending the head, arms, or otherparts of the body through themoonroof is dangerous. The head orarms could hit something while thevehicle is moving. This could causeserious injury or death.

Make sure the opening is clear beforeclosing the moonroof:A closing moonroof is dangerous. Thehands, head, or even neck of a person―especially a child― could be caughtin it as it closes, causing serious injuryor even death.

NOTE

After washing your Mazda or after itrains, wipe the water off the moonroofbefore operating it to avoid waterpenetration which could cause rust andwater damage to your headliner.

qTilt Operation

The rear of the moonroof can be tiltedopen to provide more ventilation.

To tilt, push the rear of the tilt switch.

To close, push the front of the tilt switch.

Tilt up

Close

Knowing Your Mazda

Doors and Locks

3-33íSome models.


Form No.8W89-EA-06K

Black plate (112,1)

qSlide Operation

To open to any position, press the rear ofthe slide switch.

To close, press the front of the slideswitch.

Open

Close

qSunshade

The sunshade can be opened and closedby hand.

The sunshade opens automatically whenthe moonroof is opened, but must beclosed by hand.

Sunshade

CAUTIONThe sunshade does not tilt. To avoiddamaging the sunshade, do not push upon it.

3-34

Knowing Your Mazda

Doors and Locks


Form No.8W89-EA-06K

Black plate (113,1)

Immobilizer SystemThe immobilizer system allows the engineto start only with a key the systemrecognizes.

If someone attempts to start the enginewith an unrecognized key, the engine willnot start, thereby helping to prevent thetheft of your vehicle.

CAUTIONl Radio equipment like this isgoverned by laws in the UnitedStates.Changes or modifications notexpressly approved by the partyresponsible for compliance couldvoid the user's authority to operatethe equipment.

l To avoid damage to the key, do not:

l Drop the key.l Get the key wet.l Expose the key to any kind of

magnetic field.l Expose the key to high

temperatures on places such as thedashboard or hood, under directsunlight.

CAUTIONWhen starting the engine do not allowthe following, as the engine may notstart due to the electronic signal fromthe ignition key not being transmittedcorrectly.

l A key ring rests on the key grip.

l Metal parts of other keys or metalobjects touch the key grip.

l Spare keys or keys for other vehiclesequipped with an immobilizersystem touch or come near the keygrip.

l Devices for electronic purchases, orsecurity passage touch or come nearthe key.

Knowing Your Mazda

Security System

3-35


Form No.8W89-EA-06K

Black plate (114,1)

NOTE

l (U.S.A.)This device complies with Part 15 ofthe FCC Rules. Operation is subjectto the following two conditions: (1)this device may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.

l (CANADA)This device complies with RSS-210of Industry CANADA. Operation issubject to the following twoconditions: (1) this device may notcause interference, and (2) thisdevice must accept any interference,including interference that may causeundesired operation of the device.

qOperation

Arming

The system is armed when the ignitionswitch is turned from the ON to the ACCposition.The security indicator light in theinstrument panel flashes every 2 secondsuntil the system is disarmed.

Disarming

The system is disarmed when the ignitionswitch is turned to the ON position withthe correct ignition key.The security indicator light illuminates forabout 3 seconds and goes out.

If the engine doesn't start with the correctignition key, and the security indicatorlight keeps illuminating or flashing, thesystem may have a malfunction. Consultan Authorized Mazda Dealer.

NOTE

l If the security indicator light comeson and stays on when the ignitionswitch is turned to the ON position,the engine will not start.

l Signals from a TVor radio station, orfrom a transceiver or a mobiletelephone, could interfere with yourimmobilizer system. If you are usingthe proper key and your engine failsto start, check the security indicatorlight. If it is flashing, remove theignition key and wait 2 seconds ormore, then reinsert it and try startingthe engine again. If it doesn't startafter 3 or more tries, contact anAuthorized Mazda Dealer.

l If the security indicator light flashescontinuously while you are driving,don't shut off the engine. Go to anAuthorized Mazda Dealer and haveit checked. If you shut off the enginewhile the light is flashing you won'tbe able to restart it.

3-36

Knowing Your Mazda

Security System


Form No.8W89-EA-06K

Black plate (115,1)

NOTE

l Since the electronic codes are resetwhen repairing the immobilizersystem, the keys are needed. Bringall the existing keys to an AuthorizedMazda Dealer.

qMaintenance

If you have a problem with theimmobilizer system or the key, consult anAuthorized Mazda Dealer.

NOTE

l The keys carry a unique electroniccode. For this reason, and to assureyour safety, obtaining replacementkey requires some waiting time.They are only available through anAuthorized Mazda Dealer.

l Always keep a spare key, in case oneis lost. If a key is lost, contact anAuthorized Mazda Dealer as soon aspossible.

l If you lose a key, an AuthorizedMazda Dealer will reset theelectronic codes of your remainingkeys and immobilizer system. Bringall the remaining keys to anAuthorized Mazda Dealer to reset.Starting the vehicle with a key thathas not been reset is not possible.

qModification and Add-OnEquipment

Mazda cannot guarantee the immobilizersystem's operation if the system has beenmodified or if any add-on equipment hasbeen installed to it.

CAUTIONTo avoid damage to your vehicle, donot modify the system or install anyadd-on equipment to the immobilizersystem or the vehicle.

Knowing Your Mazda

Security System

3-37


Form No.8W89-EA-06K

Black plate (116,1)

Theft-Deterrent Systemí

The optional theft-deterrent system isdesigned to prevent your vehicle or itscontents from being stolen when all doors,hood, and trunk lid/liftgate/hatch arelocked.

If forcible entry is attempted, the systemsounds the horn and flashes the hazardwarning lights.

NOTE

l The theft-deterrent system operateswith the key or the keyless entrysystem transmitter.

l The system will not function unlessit is properly armed. To properlysecure the vehicle, always make sureall windows are completely closedand all doors and the trunk lid/liftgate/hatch are locked beforeleaving the vehicle. Remember totake your key and transmitter.

qOperation

System triggering conditions

The horn sounds intermittently and thehazard warning lights flash for about 25seconds when the system is triggered byany one of the following:

l Forcing open a door, the hood or thetrunk lid/liftgate/hatch.

l Unlocking a door with the inside door-lock knob.

l Unlocking a door with the door lockswitch.

l Opening a door by operating an insidedoor-lock knob.

l Opening the hood by operating thehood release handle.

l Opening the trunk lid by operating thetrunk lid release button.

If the system is triggered again, the lightsand horn will activate until a door isunlocked or the trunk lid is opened withthe key or with the transmitter.

qHow to Arm the System

1. Remove the key from the ignitionswitch.

2. Make sure the hood is closed. Closeand lock all doors and the hatch/liftgate/trunk lid from the outside usingthe key or press the lock button onyour keyless entry system transmitter.The hazard warning lights will flashonce to indicate that the system isarmed.

The following method will also arm thetheft-deterrent system:Close the hood and the hatch/liftgate/trunk lid . Press the area on the door-lock switch marked “LOCK” once.Close all doors.

NOTE

Locking the doors with the inside door-lock knob will not arm the system.

qTo Turn off an Armed System

An armed system can be turned off by anyone of the following methods:

l Unlock a door with the key.

l Press the unlock button on the keylessentry system transmitter.

3-38

Knowing Your Mazda

íSome models.

Security System


Form No.8W89-EA-06K

Black plate (117,1)

l Insert the key into the ignition switchand turn it to the ON position.

The hazard warning lights will flash twiceto indicate that the system is turned off.

NOTE

The trunk lid can be opened with thekey or the transmitter even when thesystem is armed. The alarm will notcome on and the system will remainarmed.

qTo Stop an Alarm

A triggered alarm can be turned off byany one of the following methods:

l Unlock a door with the key.

l Open the trunk lid with the key.

l Press the unlock button or press andhold the trunk button on the keylessentry system transmitter.

NOTE

If you have any problem with the theft-deterrent system, consult an AuthorizedMazda Dealer.

qTheft-Deterrent Labels

A label indicating that your vehicle isequipped with a Theft-Deterrent System isin the glove box.

Mazda recommends that you affix it to thelower rear corner of a front door window.

Knowing Your Mazda

Security System

3-39


Form No.8W89-EA-06K

Black plate (118,1)

Steering Wheel

WARNINGNever adjust the steering wheel whilethe vehicle is moving:Adjusting the steering wheel while thevehicle is moving is dangerous.Moving it can very easily cause thedriver to abruptly turn to the left orright. This can lead to loss of controlor an accident.

qSteering Wheel Adjustment

To change the angle or length of thesteering wheel:

1. Stop the vehicle, pull down the lockrelease lever under the steeringcolumn.

Lock release lever

2. Tilt the steering wheel and/or adjust thesteering column length to the desiredpositions, push the lever up to lock thecolumn.

3. Push the wheel up and down to becertain it's locked before driving.

Mirrors

qOutside Mirrors

Check the mirror angles before driving.

WARNINGBe sure to look over your shoulderbefore changing lanes:Changing lanes without taking intoaccount the actual distance of thevehicle in the convex mirror isdangerous. You could have a seriousaccident. What you see in the convexmirror is closer than it appears.

Power control mirror

The ignition switch must be in the ACCor ON position.

To adjust:

1. Press the left or right side of theselector switch to choose the left orright side mirror.

2. Depress the mirror switch in theappropriate direction.

Outside mirror

Selector switch

Mirror switch

3-40

Knowing Your Mazda

Steering Wheel and Mirrors


Form No.8W89-EA-06K

Black plate (119,1)

After adjusting the mirror, lock the controlby placing the selector switch in themiddle position.

Mirror defrosterí

To turn on the mirror defrosters, turn theignition switch to the ON position andpush the rear window defroster switch(page 5-45).

qRearview Mirror

WARNINGDo not stack cargo or objects higherthan the seatbacks:Cargo stacked higher than theseatbacks is dangerous. It can blockyour view in the rearview mirror,which might cause you to hit anothercar when changing lanes.

Rearview mirror adjustment

Before driving, adjust the rearview mirrorto center on the scene through the rearwindow.Manual day/night mirror

Auto-dimming mirror

NOTE

For the manual day/night mirror,perform the adjustment with the day/night lever in the day position.

Reducing glare from headlights

Manual day/night mirror

Push the day/night lever forward for daydriving. Pull it back to reduce glare ofheadlights from cars at the rear.

Night

Day

Day/Night lever

Auto-dimming mirror

The auto-dimming mirror automaticallyreduces glare of headlights from cars atthe rear when the ignition switch is in theON position.

Knowing Your Mazda


3-41íSome models.


Form No.8W89-EA-06K

Black plate (120,1)

Press the OFF button ( ) to cancel theautomatic dimming function. Theindicator light will go off.To reactivate the automatic dimmingfunction, press the ON button ( ). Theindicator light will illuminate.

Indicator light OFF button

ON button

NOTE

l Do not use glass cleaner or suspendobjects on or around the light sensor.Otherwise, light sensor sensitivitywill be affected and may not operatenormally.

Light sensor

Light sensor

l For information regarding the 3buttons ( , , ) on the auto-dimming mirror, refer to HomeLinkWireless Control System (page5-47).

3-42

Knowing Your Mazda



Form No.8W89-EA-06K

Black plate (121,1)

4 Before Driving Your Mazda

Important information about driving your Mazda.

Fuel and Engine Exhaust Precautions ........................................ 4-2Fuel Requirements .................................................................... 4-2Emission Control System .......................................................... 4-3Engine Exhaust (Carbon Monoxide) ......................................... 4-5

Before Starting the Engine ........................................................... 4-6Before Getting In ...................................................................... 4-6After Getting In ......................................................................... 4-6

Driving Tips ................................................................................... 4-7Break-In Period ......................................................................... 4-7Money-Saving Suggestions ...................................................... 4-7Hazardous Driving .................................................................... 4-8Rocking the Vehicle .................................................................. 4-9Winter Driving .......................................................................... 4-9Driving In Flooded Area ......................................................... 4-10Overloading ............................................................................. 4-11

Towing ......................................................................................... 4-12Trailer Towing ......................................................................... 4-12

4-1


Form No.8W89-EA-06K

Black plate (122,1)

Fuel RequirementsVehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,which will reduce exhaust emissions and keep spark plug fouling to a minimum.

Your Mazda will perform best with fuel listed in the table.

Fuel Octane Rating*(Anti-knock index)

Regular unleaded fuel 87 [ (R+M)/2 method] or above (91 RON or above)

* U.S. federal law requires that octane ratings be posted on gasoline station pumps.

Fuel with a rating lower than 87 octane (91 RON) could cause the emission control systemto lose effectiveness. It could also cause engine knocking and serious engine damage.

CAUTIONl USE ONLY UNLEADED FUEL.Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead todeterioration of the emission control system and or failures.

l Your vehicle can only use oxygenated fuels containing no more than 10% ethanol byvolume. Damage to your vehicle may occur when ethanol exceeds thisrecommendation, or if the gasoline contains any methanol. Stop using gasohol of anykind if your vehicle engine is performing poorly.

l Never add fuel system additives. Never add cleaning agents other than those specifiedby Mazda. Other cleaning agents and additives may damage the system. Consult anAuthorized Mazda Dealer.

Gasoline blended with oxygenates such as alcohol or ether compounds are generallyreferred to as oxygenated fuels. The common gasoline blend that can be used with yourvehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such asethanol or methanol, may be marketed under the name “Gasohol”.

Vehicle damage and drivability problems resulting from the use of the following may notbe covered by the Mazda warranty.

l Gasohol containing more than 10% ethanol.

l Gasoline or gasohol containing methanol.

l Leaded fuel or leaded gasohol.

4-2

Before Driving Your Mazda

Fuel and Engine Exhaust Precautions


Form No.8W89-EA-06K

Black plate (123,1)

Emission Control SystemYour vehicle is equipped with an emission control system (the catalytic converter is part ofthis system) that enables your vehicle to comply with existing exhaust emissionsrequirements.

WARNINGNever park over or near anything flammable:Parking over or near anything flammable, such as dry grass, is dangerous. Even withthe engine turned off, the exhaust system remains very hot after normal use and couldignite anything flammable. A resulting fire could cause serious injury or death.

CAUTIONIgnoring the following precautions could cause lead to accumulate on the catalyst insidethe converter or cause the converter to get very hot. Either condition will damage theconverter and cause poor performance.

l USE ONLY UNLEADED FUEL.

l Don't drive your Mazda with any sign of engine malfunction.

l Don't coast with the ignition switch turned off.

l Don't descend steep grades in gear with the ignition switch turned off.

l Don't operate the engine at high idle for more than 2 minutes.

l Don't tamper with the emission control system. All inspections and adjustments mustbe made by a qualified technician.

l Don't push-start or pull-start your vehicle.

NOTE

Under U.S. federal law, any modification to the original-equipment emission controlsystem before the first sale and registration of a vehicle is subject to penalties. In somestates, such modification made on a used vehicle is also subject to penalties.



4-3


Form No.8W89-EA-06K

Black plate (124,1)

NOTE

After driving some distance and turning off the engine, the sound of a valve opening andclosing can be heard at the rear of the vehicle, however this does not indicate anabnormality. Your vehicle has a self-checking device and it operates after turning off theengine.

4-4




Form No.8W89-EA-06K

Black plate (125,1)

Engine Exhaust (Carbon Monoxide)

WARNINGDo not drive your vehicle if you smell exhaust gas inside the vehicle:Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which iscolorless, odorless, and poisonous. When inhaled, it can cause loss of consciousnessand death. If you smell exhaust gas inside your vehicle, keep all windows fully openand contact an Authorized Mazda Dealer immediately.

Do not run the engine when inside an enclosed area:Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaustgas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss ofconsciousness or even death could occur.

Open the windows or adjust the heating or cooling system to draw fresh air whenidling the engine:Exhaust gas is dangerous. When your vehicle is stopped with the windows closed andthe engine running for a long time even in an open area, exhaust gas, which containspoisonous carbon monoxide, could enter the cabin. Loss of consciousness or evendeath could occur.

Clear snow from underneath and around your vehicle, particularly the tail pipe,before starting the engine:Running the engine when a vehicle is stopped in deep snow is dangerous. The exhaustpipe could be blocked by the snow, allowing exhaust gas to enter the cabin. Becauseexhaust gas contains poisonous carbon monoxide, it could cause loss ofconsciousness or even death to occupants in the cabin.



4-5


Form No.8W89-EA-06K

Black plate (126,1)

Before Getting Inl Be sure the windows, outside mirrors,and outside lights are clean.

l Inspect inflation pressures andcondition of tires.

l Look under the vehicle for any sign ofa leak.

l If you plan to back up, make surenothing is in your way.

NOTE

Engine oil, engine coolant, brake/clutchfluid, washer fluid, and other fluidlevels should be inspected. SeeMaintenance, Section 8.

After Getting Inl Are all doors closed and locked?

l Is the seat adjusted properly?

l Are the inside and outside mirrorsadjusted?

l Is everyone's seat belt fastened?

l Check all gauges.

l Check all warning lights when theignition switch is turned to the ONposition.

l Release the parking brake and makesure the brake warning light goes off.

Always be thoroughly familiar with yourMazda.

4-6


Before Starting the Engine


Form No.8W89-EA-06K

Black plate (127,1)

Break-In PeriodNo special break-in is necessary, but a fewprecautions in the first 1,000 km (600miles) may add to the performance,economy, and life of your Mazda.

l Don't race the engine.

l Don't maintain one constant speed,either slow or fast, for a long period oftime.

l Don't drive constantly at full-throttle orhigh engine rpm for extended periodsof time.

l Avoid unnecessary hard stops.

l Avoid full-throttle starts.

Money-Saving SuggestionsHow you operate your Mazda determineshow far it will travel on a tank of fuel. Usethese suggestions to help save money onfuel and repairs.

l Avoid long warm-ups. Once the engineruns smoothly, begin driving.

l Avoid fast starts.

l Keep the engine tuned. Follow themaintenance schedule (page 8-3) andhave an Authorized Mazda Dealerperform inspections and servicing.

l Use the air conditioner only whennecessary.

l Slow down on rough roads.

l Keep the tires properly inflated.

l Don't carry unnecessary weight.

l Don't rest your foot on the brake pedalwhile driving.

l Keep the wheels in correct alignment.

l Keep windows closed at high speeds.

l Slow down when driving in crosswindsand headwinds.

WARNINGNever stop the engine when goingdown a hill:Stopping the engine when going downa hill is dangerous. This causes theloss of power steering and powerbrake control, and may cause damageto the drivetrain. Any loss of steeringor braking control could cause anaccident.


Driving Tips

4-7


Form No.8W89-EA-06K

Black plate (128,1)

Hazardous Driving

WARNINGBe extremely careful if it is necessaryto downshift on slippery surfaces:Downshifting into lower gear whiledriving on slippery surfaces isdangerous. The sudden change in tirespeed could cause the tires to skid.This could lead to loss of vehiclecontrol and an accident.

Do not rely on ABS as a substitute forsafe driving:The ABS cannot compensate forunsafe and reckless driving, excessivespeed, tailgating (following anothervehicle too closely), driving on ice andsnow, and hydroplaning (reduced tirefriction and road contact because ofwater on the road surface). You canstill have an accident.

When driving in water, mud, sand, orsimilar hazards:

l Be cautious and allow extra distancefor braking.

l Avoid sudden braking and suddenmaneuvering.

l If your vehicle is not equipped withABS, brake with the pedal by using alight up-down motion. Do not hold thepedal down constantly.If your vehicle is equipped with ABS,do not pump the brakes. Continue topress down on the brake pedal.Refer to Anti-Lock Brake System(ABS) on page 5-6.

l If you get stuck, select a lower gear andaccelerate slowly. Do not spin the frontwheels.

l For more traction in starting onslippery surfaces, use sand, rock salt,chains, carpeting, or other nonslipmaterial under the front wheels.

4-8


Driving Tips


Form No.8W89-EA-06K

Black plate (129,1)

Rocking the Vehicle

WARNINGDo not spin the wheels at more than56 km/h (35 mph), and do not allowanyone to stand behind a wheel whenpushing the vehicle:When the vehicle is stuck, spinningthe wheels at high speed is dangerous.The spinning tire could overheat andexplode. This could cause seriousinjuries.

CAUTIONToo much rocking may cause engineoverheating, transaxle failure, and tiredamage.

If you must rock the vehicle to free it fromsnow, sand or mud, depress theaccelerator slightly and slowly move theshift lever from 1 (D) to R.

Winter Drivingl Carry emergency gear, windowscraper, flares, a small shovel, jumpercables, and a small bag of sand or salt.

Ask an Authorized Mazda Dealer toperform the following precautions:

l Have the proper ratio of antifreeze inthe radiator.Refer to Engine Coolant on page 8-20.

l Inspect the battery and its cables. Coldreduces battery capacity.

l Inspect the ignition system for damageand loose connections.

l Use washer fluid made withantifreeze―but don't use enginecoolant antifreeze for washer fluid(page 8-27).

l Don't use the parking brake in freezingweather as the parking brake mayfreeze. Instead, shift to P with anautomatic transaxle and to 1 or R witha manual transaxle. Block the rearwheels.


Driving Tips

4-9


Form No.8W89-EA-06K

Black plate (130,1)

qSnow Tires

Use snow tires on all four wheels

Don't go faster than 120 km/h (75 mph)while driving with snow tires. Inflatesnow tires 30 kPa (0.3 kgf/cm2, 4.3 psi)more than recommended on the tirepressure label (driver's door frame), butnever more than the maximum cold-tirepressure shown on the tires.Your vehicle is originally equipped withall season radials designed to be used allyear around. In some extreme climatesyou may find it necessary to replace themwith snow tires during the winter monthsto further improve traction on snow andice covered roads.

WARNINGUse only the same size and type tires(snow, radial, or non-radial) on allfour wheels:Using tires different in size or type isdangerous. Your vehicle's handlingcould be greatly affected and result inan accident.

CAUTIONCheck local regulations before usingstudded tires.

qTire Chains

This vehicle cannot be operated with tirechains because it could cause interferencewith the vehicle body and scratching.

Driving In Flooded Area

WARNINGDry wet brakes by driving very slowlyand applying the brakes lightly untilbrake performance returns to normal:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.

CAUTIONMake sure water does not enter thevehicle interior or the engine area.Interior materials could get moldy, andmany electronic devices in the cabinand the engine could be damaged.

4-10


Driving Tips


Form No.8W89-EA-06K

Black plate (131,1)

Overloading

WARNINGBe careful not to overload yourvehicle:The gross axle weight rating (GAWR)and the gross vehicle weight rating(GVWR) of your vehicle are on theMotor Vehicle Safety Standard Labelon the driver's door frame. Exceedingthese ratings can cause an accident orvehicle damage. You can estimate theweight of your load by weighing theitems (or people) before putting themin the vehicle.


Driving Tips

4-11


Form No.8W89-EA-06K

Black plate (132,1)

Trailer TowingThe Mazda6 is not designed for towing.Never tow a trailer with your Mazda6.

4-12


Towing


Form No.8W89-EA-06K

Black plate (133,1)

5 Driving Your Mazda

Explanation of instruments and controls.

Starting and Driving ..................................................................... 5-2Ignition Switch .......................................................................... 5-2Starting the Engine .................................................................... 5-3Brake System ............................................................................ 5-4Manual Transaxle Operation ..................................................... 5-9Automatic Transaxle Controls ................................................. 5-11Power Steering ........................................................................ 5-18Cruise Control ......................................................................... 5-18Traction Control System (TCS)í ........................................... 5-22

Instrument Cluster and Indicators ............................................ 5-24Meters and Gauges .................................................................. 5-24

Warning/Indicator Lights and Beep Sounds ............................ 5-29Warning/Indicator Lights ........................................................ 5-29Beep Sounds ........................................................................... 5-39

Switches and Controls ................................................................ 5-40Lighting Control ..................................................................... 5-40Turn and Lane-Change Signals ............................................... 5-42Fog Lightsí ............................................................................ 5-42Windshield Wipers and Washer .............................................. 5-43Rear Window Wiper and Washerí ......................................... 5-44Rear Window Defroster ........................................................... 5-45Horn ........................................................................................ 5-46Hazard Warning Flasher .......................................................... 5-46HomeLink Wireless Control Systemí .................................... 5-47

5-1íSome models.


Form No.8W89-EA-06K

Black plate (134,1)

Ignition Switch

qIgnition Switch Positions

LOCK

The steering wheel locks to protectagainst theft. Only in this position can thekey be removed.

Manual transaxle

To turn the key from the ACC to theLOCK position, push the key in at theACC position, then turn it to the LOCKposition.

Push the key

Automatic transaxle

To turn the key from the ACC to theLOCK position, the shift lever must be inthe P position.

Shift lever engaged in P (park)

WARNINGRemove the key only when the vehicleis parked:Removing the key from the ignitionswitch while the vehicle is moving isdangerous. Removing the key allowsthe steering wheel to lock. You willlose steering control and a seriousaccident could occur.

Before leaving the driver's seat,always set the parking brake andmake sure the shift lever is in P withan automatic transaxle or in 1 or Rwith a manual transaxle:Leaving the driver's seat withoutsetting the parking brake and the shiftlever is dangerous. Unexpected vehiclemovement could occur. This couldcause an accident.

5-2

Driving Your Mazda

Starting and Driving


Form No.8W89-EA-06K

Black plate (135,1)

NOTE

If turning the key is difficult, jiggle thesteering wheel from side to side.

ACC (Accessory)

The steering wheel unlocks and someelectrical accessories will operate.

ON

This is the normal running position afterthe engine is started. The warning lights(except brakes) should be inspectedbefore the engine is started (page 5-29).

NOTE

When the ignition switch is turned tothe ON position, the sound of the fuelpump motor operating near the fueltank can be heard. This does notindicate an abnormality.

START

The engine is started in this position. Itwill crank until you release the key; thenit returns to the ON position. The brakewarning light can be checked after theengine is started (page 5-29).

qIgnition Key Reminder

If the ignition switch is in the LOCK orACC position with the key inserted, acontinuous beep sound will be heardwhen the driver's door is opened.

Starting the Engine

NOTE

Engine-starting is controlled by thespark ignition system.This system meets all CanadianInterference-Causing EquipmentStandard requirements regulating theimpulse electrical field strength of radionoise.

1. Occupants should fasten their seatbelts.

2. Make sure the parking brake is on.

3. Depress the brake pedal.

4. (Manual transaxle)Depress the clutch pedal all the wayand shift into neutral.Keep the clutch pedal depressed whilecranking the engine.

(Automatic transaxle)Put the vehicle in park (P). If you mustrestart the engine while the vehicle ismoving, shift into neutral (N).

NOTE

(Manual transaxle)The starter will not operate if the clutchpedal is not depressed all the way.

(Automatic transaxle)The starter will not operate if the shiftlever is not in P or N.

5. Turn the ignition switch to the STARTposition and hold (up to 10 seconds ata time) until the engine starts.

Driving Your Mazda


5-3


Form No.8W89-EA-06K

Black plate (136,1)

CAUTIONDon't try the starter for more than 10seconds at a time. If the engine stalls orfails to start, wait 10 seconds beforetrying again. Otherwise, you maydamage the starter and drain the battery.

6. After starting the engine, let it idle forabout 10 seconds.

NOTE

l In extremely cold weather, below_18 °C (0 °F), or after the vehiclehas not been driven in several days,let the engine warm up withoutoperating the accelerator.

l Whether the engine is cold or warm,it should be started without use ofthe accelerator.

Brake System

qFoot Brake

Your Mazda has power-assisted brakesthat adjust automatically through normaluse.

Should power-assist fail, you can stop byapplying greater force than normal to thebrake pedal. But the distance required tostop will be greater than usual.

WARNINGDo not coast with the engine stalled orturned off, find a safe place to stop:Coasting with the engine stalled orturned off is dangerous. Braking willrequire more effort, and the brake'spower-assist could be depleted if youpump the brake. This will causelonger stopping distances or even anaccident.

Shift to a lower gear when going downsteep hills:Driving with your foot continuouslyon the brake pedal or steadily applyingthe brakes for long distances isdangerous. This causes overheatedbrakes, resulting in longer stoppingdistances or even total brake failure.This could cause loss of vehiclecontrol and a serious accident. Avoidcontinuous application of the brakes.

5-4

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (137,1)

WARNINGDry brakes that have become wet bydriving very slowly and applying thebrakes lightly until brake performanceis normal:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.

qParking Brake

WARNINGBefore leaving the driver's seat,always set the parking brake andmake sure the shift lever is in P withan automatic transaxle or in 1 or Rwith a manual transaxle:Leaving the driver's seat withoutsetting the parking brake and the shiftlever is dangerous. Unexpected vehiclemovement could occur. This couldcause an accident.

CAUTIONDriving with the parking brake on willcause excessive wear of the brakelinings or pads.

NOTE

For parking in snow, refer to WinterDriving (page 4-9) regarding parkingbrake use.

Setting the parking brake

Depress the brake pedal and then firmlypull the parking brake lever fully upwardswith a greater amount of force than isrequired so that the vehicle holds in thestationary position.

Releasing the parking brake

Depress the brake pedal and pull theparking brake lever upwards, then pressthe release button. While holding thebutton, lower the parking brake lever allthe way down to the released position.

Driving Your Mazda


5-5


Form No.8W89-EA-06K

Black plate (138,1)

qBrake System Warning Light

This warning has the following functions:

Parking brake warning

The light comes on when the parkingbrake is applied with the ignition switchin the START or ON position. It goes offwhen the parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brakeis fully released, you may have a brakeproblem.

Drive to the side of the road and park offthe right-of-way.

You may notice that the pedal is harder topush or that it may go closer to the floor.In either case, it will take longer to stopthe vehicle.

1. With the engine stopped, check thebrake fluid level immediately and addfluid as required (page 8-22).

2. After adding fluid, check the lightagain.

If the warning light remains on, or if thebrakes do not operate properly, do notdrive the vehicle. Have it towed to anAuthorized Mazda Dealer.

Even if the light goes out have your brakesystem inspected as soon as possible byan Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimesan indicator of leakage. Consult anAuthorized Mazda Dealer as soon aspossible even if the brake light is nolonger illuminated.

WARNINGDo not drive with the brake systemwarning light illuminated. Contact anAuthorized Mazda Dealer to have thebrakes inspected as soon as possible:Driving with the brake system warninglight illuminated is dangerous. Itindicates that your brakes may notwork at all or that they couldcompletely fail at any time. If this lightremains illuminated, after checkingthat the parking brake is fullyreleased, have the brakes inspectedimmediately.

qAnti-Lock Brake System (ABS)í

The ABS control unit continuouslymonitors the speed of each wheel. If oneis about to lock up, the ABS responds byautomatically releasing and reapplyingthat wheel's brake.

The driver will feel a slight vibration inthe brake pedal and may hear a chatteringnoise from the brake system. This isnormal when the ABS operates. Don'tpump the brakes, continue to press downon the brake pedal.

5-6

Driving Your Mazda

íSome models.



Form No.8W89-EA-06K

Black plate (139,1)

WARNINGDo not rely on ABS as a substitute forsafe driving:The ABS cannot compensate forunsafe and reckless driving, excessivespeed, tailgating (following anothervehicle too closely), driving on ice andsnow, and hydroplaning (reduced tirefriction and road contact because ofwater on the road surface). You canstill have an accident.

NOTE

Braking distances may be longer onloose surfaces (snow or gravel, forexample) which usually have a hardfoundation. A vehicle with a normalbraking system may require lessdistance to stop under these conditionsbecause the tires will build up a wedgeof surface layer when the wheels skid.

qABS Warning Lightí

The warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.

If the ABS warning light stays on whileyou're driving, the ABS control unit hasdetected a system malfunction. If thisoccurs, your brakes will function normallyas if the vehicle had no ABS.Should this happen, consult an AuthorizedMazda Dealer as soon as possible.

NOTE

When the engine is jump-started tocharge the battery, uneven rpm occursand the ABS warning light comes on.This is due to a weak battery, not amalfunction.Recharge the battery.

qElectronic Brake ForceDistribution System Warningí

If the electronic brake force distributioncontrol unit determines that somecomponents are operating incorrectly, thecontrol unit may turn the brake systemwarning light and the ABS warning lighton at the same time. The problem is likelyto be an electronic brake force distributionsystem.

Driving Your Mazda


5-7íSome models.


Form No.8W89-EA-06K

Black plate (140,1)

WARNINGDo not drive with both the ABSwarning light and brake warning lightilluminated. Have the vehicle towed toan Authorized Mazda Dealer to havethe brakes inspected as soon aspossible:Driving when the brake systemwarning light and ABS warning lightare illuminated at the same time isdangerous.When both lights are illuminated, therear wheels could lock more quickly inan emergency stop than under normalcircumstances.

qBrake Pad Wear Indicator

When the disc brake pads become worn,the built-in wear indicators contact thedisc plates. This causes a screeching noiseto warn that the pads should be replaced.

When you hear this noise, consult anAuthorized Mazda Dealer as soon aspossible.

WARNINGDo not drive with worn disc pads:Driving with worn disc pads isdangerous. The brakes could fail andcause a serious accident. As soon asyou hear a screeching noise consultan Authorized Mazda Dealer.

5-8

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (141,1)

Manual Transaxle Operation

qManual Transaxle Shift Pattern

Neutral position

The shift pattern of the transaxle isconventional, as shown.

Depress the clutch pedal all the way downwhile shifting; then release it slowly.

A safety feature prevents accidentalshifting from 5 to R (reverse). The shiftlever must be put in neutral before beingshifted to R.

WARNINGDo not use sudden engine braking onslippery road surfaces or at highspeeds:Shifting down while driving on wet,snowy, or frozen roads, or whiledriving at high speeds causes suddenengine braking, which is dangerous.The sudden change in tire speed couldcause the tires to skid. This could leadto loss of vehicle control and anaccident.

Be sure to leave the shift lever in 1 orR position and set the parking brakewhen leaving the vehicle unattended:Otherwise the vehicle could move andcause an accident.

CAUTIONl Keep your foot off the clutch pedalexcept when shifting gears. Also,don't use the clutch to hold thevehicle on an upgrade. Riding theclutch will cause needless clutchwear and damage.

l Make sure the vehicle comes to acomplete stop before shifting to R.Shifting to R while the vehicle is stillmoving may damage the transaxle.

NOTE

If shifting to R is difficult, shift backinto neutral, release the clutch pedal,and try again.

Driving Your Mazda


5-9


Form No.8W89-EA-06K

Black plate (142,1)

qRecommendations for Shifting

Upshifting

2.3-liter engine

For normal acceleration, we recommendthese shift points.

Gear Vehicle speed

1 to 2 26 km/h (16 mph)

2 to 3 45 km/h (28 mph)

3 to 4 53 km/h (33 mph)

4 to 5 63 km/h (39 mph)

For cruising

Gear Vehicle speed

1 to 2 13 km/h (8 mph)

2 to 3 32 km/h (20 mph)

3 to 4 50 km/h (31 mph)

4 to 5 68 km/h (42 mph)

3.0-liter engine

For normal acceleration, we recommendthese shift points.

Gear Vehicle speed

1 to 2 27 km/h (17 mph)

2 to 3 48 km/h (30 mph)

3 to 4 56 km/h (35 mph)

4 to 5 63 km/h (39 mph)

For cruising

Gear Vehicle speed

1 to 2 13 km/h (8 mph)

2 to 3 34 km/h (21 mph)

3 to 4 52 km/h (32 mph)

4 to 5 66 km/h (41 mph)

Downshifting

When you must slow down in heavytraffic or on a steep upgrade, downshiftbefore the engine starts to overwork. Thisreduces the chance of stalling and givesbetter acceleration when you need morespeed.On a steep downgrade, downshiftinghelps maintain safe speed and prolongsbrake life.

5-10

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (143,1)

Automatic Transaxle Controls

Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ACC or ON position).

Indicates the shift lever can be shifted freely into any position.

Various Lockouts:

qTransaxle Ranges

The shift lever must be in P or N tooperate the starter.

P (Park)

P locks the transaxle and prevents thefront wheels from rotating.

WARNINGAlways set the shift lever to PAND setthe parking brake:Only setting the shift lever to the Pposition without using the parkingbrake to hold the vehicle is dangerous.If P fails to hold, the vehicle couldmove and cause an accident.

CAUTIONl Shifting into P, N or R while thevehicle is moving can damage yourtransaxle.

l Shifting into a driving gear orreverse when the engine is runningfaster than idle can damage thetransaxle.

R (Reverse)

In position R, the vehicle moves onlybackward. You must be at a complete stopbefore shifting to or from R, except underrare circumstances as explained inRocking the Vehicle (page 4-9).

Driving Your Mazda


5-11


Form No.8W89-EA-06K

Black plate (144,1)

N (Neutral)

In N, the wheels and transaxle are notlocked. The vehicle will roll freely evenon the slightest incline unless the parkingbrake or brakes are on.

WARNINGIf the engine is running faster thanidle, do not shift from N or P into adriving gear:It's dangerous to shift from N or Pinto a driving gear when the engine isrunning faster than idle. If this isdone, the vehicle could move suddenly,causing an accident or serious injury.

Do not shift into N when driving thevehicle:Shifting into N while driving isdangerous. Engine braking cannot beapplied when decelerating whichcould lead to an accident or seriousinjury.

CAUTIONDo not shift into N when driving thevehicle. Doing so can cause transaxledamage.

NOTE

Apply the parking brake or depress thebrake pedal before moving the shiftlever from N to prevent the vehiclefrom moving unexpectedly.

D (Drive)

D is the normal driving position. From astop, the transaxle will automatically shiftthrough a 5-gear/6-gear* sequence.

* 3.0-liter engine model

M (Manual)

M is the manual shift mode position.Gears can be shifted up or down byoperating the shift lever.Refer to Manual Shift Mode (page 5-13).

qShift-Lock System

The shift-lock system prevents shiftingout of P unless the brake pedal isdepressed.

To shift from P:

1. Depress and hold the brake pedal.

2. Start the engine.

3. Move the shift lever.

NOTE

l When the ignition switch is in theLOCK position, the shift levercannot be shifted from P.

l To be sure the vehicle is in park, theignition key cannot be removedunless the shift lever is in P.

5-12

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (145,1)

qManual Shift Mode

This mode gives you the feel of driving amanual transaxle vehicle by operating theshift lever and allows you to controlengine rpm and torque to the front wheelsmuch like a manual transaxle when morecontrol is desired.

To change to manual shift mode, shift thelever from D to M.

To return to automatic shift mode, shiftthe lever from M to D.

NOTE

l If you change to manual shift modewhen the vehicle is stopped, the gearwill shift to M1.

l If you shift up once when the vehicleis stopped and the gear is at M1, thegear will shift to M2. M2 is helpfulfor starting on slippery surfaces.

l (2.3-liter engine model)If you change to manual shift modewithout depressing the acceleratorpedal when driving in D range, 5thgear, the gear will shift to M4.(3.0-liter engine model)If you change to manual shift modewithout depressing the acceleratorpedal when driving in D range, thegear will shift to a lower gear (Ex;the gear changes from D range, 5thto M4).

Indicators

Shift position indicator

In manual shift mode, the “M” of the shiftposition indicator in the instrument panelilluminates.

Driving Your Mazda


5-13


Form No.8W89-EA-06K

Black plate (146,1)

Gear position indicator

The numeral for the selected gearilluminates.

Shift position indicator


NOTE

l If the gears cannot be shifted downwhen driving at higher speeds, thegear position indicator will flashtwice to signal that the gears cannotbe shifted down.

l (2.3-liter engine model)If the automatic transaxle fluid (ATF)temperature becomes too high, thereis the possibility that the transaxlewill switch to automatic shift mode,canceling manual shift mode andturning off the gear position indicatorillumination. This is a normalfunction to protect the AT. After theATF temperature has decreased, thegear position indicator illuminationturns back on and driving in manualshift mode is restored.

Shifting

Manually Shifting up

(M1→M2→M3→M4→M5→M6*)To shift up to a higher gear, tap the shiftlever back ( ) once.


NOTE

l When driving slowly, the gears maynot shift up depending on vehiclespeed.

l In manual shift mode, gears do notshift up automatically. Don't run theengine with the tachometer needle inthe RED ZONE. If the tachometerneedle enters the RED ZONE, youmay feel engine-braking because thefuel delivery will be stopped toprotect the engine. However, thisdoes not indicate an abnormality.

l Gears may not be shifted from M1 toM2 right after shifting the lever fromD to M. Wait a few seconds and thenshift up to M2.

l When depressing the acceleratorfully, the transaxle will shift to alower gear, depending on vehiclespeed.

5-14

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (147,1)

Manually Shifting down

(M6*→M5→M4→M3→M2→M1)To shift down to a lower gear, tap the shiftlever forward ( ) once.


WARNINGDo not use sudden engine braking onslippery road surfaces or at highspeeds:Shifting down while driving on wet,snowy, or frozen roads, or whiledriving at high speeds causes suddenengine braking, which is dangerous.The sudden change in tire speed couldcause the tires to skid. This could leadto loss of vehicle control and anaccident.

NOTE

l When driving at high speeds, thegear may not shift down dependingon vehicle speed.

l During deceleration, the gear mayautomatically shift down dependingon vehicle speed.

l When depressing the acceleratorfully, the transaxle will shift to alower gear, depending on vehiclespeed.

Shifting specification (2.3-liter enginemodel)Shifting upIf the vehicle speed is lower than the speed specifiedfor each gear, the gear cannot be shifted up to ahigher gear.

Gear Vehicle speed

M1→M2You can shift up to M2 whetherthe vehicle is stopped or moving.

M2→M3 20 km/h (12 mph)

M3→M433 km/h (21 mph)

M4→M5

Shifting down

If the vehicle speed is higher than the speed specifiedfor each gear, the gear cannot be shifted down to alower gear.

Gear Vehicle speed

M5→M4 195 km/h (121 mph)

M4→M3 140 km/h (87 mph)

M3→M2 94 km/h (59 mph)

M2→M1 47 km/h (30 mph)

During deceleration, the gears shift downautomatically when speed is reduced to thefollowing:

Gear Vehicle speed

M5 or M4→M3 30 km/h (18 mph)

M3 or M2→M1 10 km/h (6 mph)

Driving Your Mazda


5-15


Form No.8W89-EA-06K

Black plate (148,1)

NOTE

If the vehicle is driven at a low speedfrom a standing start while in M2, thegear will not shift down to M1automatically until the shift lever istapped back ( ) or forward ( ).

If the vehicle is kicked down at the following speedsor lower, the gears shift down automatically:

Gear Vehicle speed

M5→M4 182 km/h (113 mph)

M4→M3 133 km/h (82 mph)

M3→M2 48 km/h (30 mph)

M2→M1 12 km/h (7 mph)

Shifting specification (3.0-liter enginemodel)

Shifting up

If the vehicle speed is lower than the speed specifiedfor each gear, the gear cannot be shifted up to ahigher gear.

Gear Vehicle speed

M1→M2You can shift up to M2 whetherthe vehicle is stopped or moving.

M2→M3 10 km/h (6 mph)

M3→M4 23 km/h (14 mph)

M4→M5 39 km/h (24 mph)

M5→M6 49 km/h (30 mph)

Shifting down

If the vehicle speed is higher than the speed specifiedfor each gear, the gear cannot be shifted down to alower gear.

Gear Vehicle speed

M5→M4 175 km/h (109 mph)

M4→M3 130 km/h (81 mph)

M3→M2 83 km/h (52 mph)

M2→M1 43 km/h (27 mph)

During deceleration, the gears shift downautomatically when speed is reduced to thefollowing:

Gear Vehicle speed

M6→M5 50 km/h (31 mph)

M5→M4 38 km/h (23 mph)

M4→M3 27 km/h (16 mph)

M3 or M2→M1 10 km/h (6 mph)

NOTE

If the vehicle is driven at a low speedfrom a standing start while in M2, thegear may not shift down to M1automatically.

If the vehicle is kicked down at the following speedsor lower, the gears shift down automatically:

Gear Vehicle speed

M6→M5 212 km/h (131 mph)

M6→M4 161 km/h (100 mph)

M5→M4 161 km/h (100 mph)

M5→M3 70 km/h (44 mph)

M4→M3 70 km/h (44 mph)

M4→M2 46 km/h (28 mph)

M3→M2 46 km/h (28 mph)

Recommendations for shifting

Upshifting

For normal acceleration and cruising, we recommendthese shift points.(2.3-liter engine model)

Gear Vehicle speed

M1 to M2 24 km/h (15 mph)




5-16

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (149,1)

(3.0-liter engine model)

Gear Vehicle speed






Downshifting

When you must slow down in heavytraffic or on a steep upgrade, downshiftbefore the engine starts to overwork. Thisgives better acceleration when you needmore speed.

On a steep downgrade, downshiftinghelps maintain safe speed and prolongsbrake life.

qDriving Tips

Passing

For extra power when passing anothervehicle or climbing steep grades, depressthe accelerator fully. The transaxle willshift to a lower gear, depending on vehiclespeed.

Climbing steep grades from a stop

To climb a steep grade from a stoppedposition:

1. Depress the brake pedal.

2. Shift to D or M1, depending on theload weight and grade steepness.

3. Release the brake pedal whilegradually accelerating.

Descending steep grades

When descending a steep grade, shift tolower gears, depending on load weightand grade steepness. Descend slowly,using the brakes only occasionally toprevent them from overheating.

Driving Your Mazda


5-17


Form No.8W89-EA-06K

Black plate (150,1)

Power SteeringPower steering is only operable when theengine is running. If the engine is off or ifthe power steering system is inoperable,you can still steer, but it requires morephysical effort.

If the steering feels rigid during normaldriving, consult an Authorized MazdaDealer.

CAUTIONNever hold the steering wheel to theextreme left or right for more than 5seconds with the engine running.This could damage the power steeringsystem.

Cruise ControlWith cruise control, you can set andautomatically maintain any speed of morethan about 30 km/h (19 mph).

WARNINGDo not use the cruise control underthe following conditions:Using the cruise control under thefollowing conditions is dangerous andcould result in loss of vehicle control.l Hilly terrainl Steep inclinesl Heavy or unsteady trafficl Slippery or winding roadsl Similar restrictions that requireinconsistent speed

qCruise Main Indicator Light

This light comes on when the ON/OFFswitch is pressed and the cruise controlsystem is activated.

5-18

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (151,1)

qCruise Set Indicator Light

This light comes on when a cruising speedis set.

qActivation/Deactivation

To activate the system, press the ON/OFFswitch.The cruise main indicator lightilluminates.

To deactivate the system, press the switchagain.The cruise main indicator light turns off.

WARNINGKeep the ON/OFF switch off whencruise control is not in use:Leaving the ON/OFF switch on whennot using the cruise control isdangerous as it may be switched onaccidentally. This could result in lossof vehicle control.

qTo Set Speed

1. Activate the cruise control system bypressing the ON/OFF switch.

2. Accelerate to the desired speed, whichmust be more than 30 km/h (19 mph).

3. Press the SET/COAST button andrelease it at the speed you want.Release the accelerator at the sametime.

Don't continue to hold in the button. Untilyou release it, speed will continue to drop(unless you continue to accelerate) andyou'll miss the desired speed.

NOTE

l The SET function can't be activateduntil about 2 seconds after the ON/OFF switch has been engaged.

l On a steep grade, the vehicle maymomentarily slow down going up orspeed up while going down.

Driving Your Mazda


5-19


Form No.8W89-EA-06K

Black plate (152,1)

qTo Increase Cruising Speed

Follow either of these procedures.

l Press the RES/ACCEL button and holdit. Your vehicle will accelerate.Release the button at the speed youwant.

Your vehicle has a tap-up feature thatallows you to increase your current speedin increments of 1.6 km/h (1 mph) by amomentary tap of the RES/ACCELbutton. Multiple taps will increase yourvehicle speed 1.6 km/h (1 mph) for eachtap.

l Accelerate to the desired speed.Press the SET/COAST button andrelease it immediately.

NOTE

Accelerate if you want to speed uptemporarily when the cruise control ison. Greater speed will not interfere withit or change the set speed.Take your foot off the accelerator toreturn to the set speed.

qTo Decrease Cruising Speed

Press the SET/COAST button and hold it.The vehicle will gradually slow.Release the button at the speed you want.

Your vehicle has a tap-down feature thatallows you to decrease your current speedin decrements of 1.6 km/h (1 mph) by amomentary tap of the SET/COASTbutton. Multiple taps will decrease yourvehicle speed 1.6 km/h (1 mph) for eachtap.

5-20

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (153,1)

qTo Resume Cruising Speed atMore Than 30 km/h (19 mph)

If some other method besides the ON/OFF switch was used to cancel cruisingspeed and the system is still activated, themost recent set speed will automaticallyresume when the RES/ACCEL button ispressed.If vehicle speed is below 30 km/h (19mph), increase the vehicle speed up to 30km/h (19 mph) and press the RES/ACCEL button.

qTo Cancel

To turn off the system, use one of thesemethods:

l Press the ON/OFF switch.

l Slightly depress the brake pedal.

l Depress the clutch pedal (Manualtransaxle only).

l Press the CANCEL button.

The system is off when the ignition is off.

NOTE

Cruise control will cancel at about 15km/h (9 mph) below the preset speed orbelow 30 km/h (19 mph).

Driving Your Mazda


5-21


Form No.8W89-EA-06K

Black plate (154,1)

Traction Control System(TCS)í

The Traction Control System (TCS)enhances traction and safety bycontrolling engine torque. When the TCSdetects driving wheel slippage, it lowersengine torque to prevent loss of traction.

This means that on a slick surface, theengine adjusts automatically to provideoptimum power to the drive wheelswithout causing them to spin and losetraction.

WARNINGDo not rely on the traction controlsystem as a substitute for safe driving:The traction control system (TCS)cannot compensate for unsafe andreckless driving, excessive speed,tailgating (following another vehicletoo closely), and hydroplaning(reduced tire friction and road contactbecause of water on the road surface).You can still have an accident.

Use snow tires and drive at reducedspeeds when roads are covered withice and/or snow:Driving without proper tractiondevices on snow and/or ice-coveredroads is dangerous. The tractioncontrol system (TCS) alone cannotprovide adequate traction and youcould still have an accident.

qTCS Indicator Light

This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS isoperating, the indicator light flashes.

If the light stays on, the TCS may have amalfunction and it may not operatecorrectly. Take your vehicle to anAuthorized Mazda Dealer.

NOTE

l In addition to the indicator lightflashing, a slight lugging sound willcome from the engine. This indicatesthat the TCS is operating properly.

l On slippery surfaces, such as freshsnow, it will be impossible toachieve high rpm when the TCS ison.

qTCS OFF Indicator Light

This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position.It also comes on when the TCS OFFswitch is pressed and TCS is switched off.

5-22

Driving Your Mazda

íSome models.



Form No.8W89-EA-06K

Black plate (155,1)

If the light stays on when the TCS is notswitched off, take your vehicle to anAuthorized Mazda Dealer. The TCS mayhave a malfunction.

NOTE

(3.0-liter engine model)After starting the engine when thecoolant temperature is extremely low,the TCS is automatically turned off. Atthis time, the TCS OFF indicator lightwill remain on, but this does notindicate an abnormality. After theengine has warmed, TCS will resumenormal operation and the indicator lightwill go out.

qTCS OFF Switch

Press the TCS OFF switch to turn off theTCS. The TCS OFF indicator light willilluminate.

Press the switch again to turn the TCSback on. The TCS OFF indicator lightwill go out.

NOTE

l When TCS is on and you attempt tofree the vehicle when it is stuck, ordrive it out of freshly fallen snow,the TCS will activate. Depressing theaccelerator will not increase enginepower and freeing the vehicle maybe difficult. When this happens, turnoff the TCS.

l If the TCS is off when the engine isturned off, it automatically activateswhen the ignition switch is turnedon.

l Leaving the TCS on will provide thebest traction.

Driving Your Mazda


5-23


Form No.8W89-EA-06K

Black plate (156,1)

Meters and Gauges(Black-out meter)When the ignition switch is in the ON position, the dashboard gauges illuminate.

Speedometer ...................................................................................................... page 5-25Odometer, Trip Meter and Trip Meter Selector .................................................. page 5-25Tachometer ........................................................................................................ page 5-26Engine Coolant Temperature Gauge .................................................................. page 5-26Fuel Gauge ........................................................................................................ page 5-27

5-24

Driving Your Mazda

Instrument Cluster and Indicators


Form No.8W89-EA-06K

Black plate (157,1)

qSpeedometer

The speedometer indicates the speed ofthe vehicle.

qOdometer, Trip Meter and TripMeter Selector

The display mode can be changedbetween trip meter A and trip meter B bypressing the selector while one of them isdisplayed. The selected mode will bedisplayed.

Trip meter

Odometer

Selector

Trip meter B

Press the selector

Press the selector

Trip meter A

Odometer

Odometer

NOTE

(Standard meter)The odometer and trip meter can bedisplayed as follows even when theignition switch is in the ACC or LOCKposition.The headlight switch must be in theor position to see the display.

l Displays for 10 minutes after theignition switch is turned to the ACCor LOCK position from the ONposition.

l Displays for 10 minutes after anydoor is opened.

Odometer

The odometer records the total distancethe vehicle has been driven.

Trip meter

The trip meter can record the totaldistance of two trips. One is recorded intrip meter A, and the other is recorded intrip meter B.

For instance, trip meter A can record thedistance from the point of origin, and tripmeter B can record the distance fromwhere the fuel tank is filled.

When trip meter A is selected, pressingthe selector again within one second willchange to trip meter B mode.

When trip meter A is selected, TRIPAwill be displayed. When trip meter B isselected, TRIP B will be displayed.

Driving Your Mazda


5-25


Form No.8W89-EA-06K

Black plate (158,1)

The trip meter records the total distancethe vehicle is driven until the meter isagain reset. Return it to “0.0” by holdingthe selector depressed for more than 1second. Use this meter to measure tripdistances and to compute fuelconsumption.

NOTE

l Only the trip meters record tenths ofkilometers (miles).

l The trip record will be erased when:

l The power supply is interrupted(blown fuse or the battery isdisconnected).

l The vehicle is driven over999.9 km (mile).

qTachometer

The tachometer shows engine speed inthousands of revolutions per minute(rpm).

Red zone

CAUTIONDon't run the engine with thetachometer needle in the RED ZONE.This may cause severe engine damage.

qEngine Coolant Temperature Gauge

The engine coolant temperature gaugeshows the temperature of the enginecoolant.

If the needle is near H, it indicatesoverheating.

CAUTIONDriving with an overheated engine cancause serious engine damage (page7-15).

5-26

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (159,1)

qFuel Gauge

The fuel gauge shows approximately howmuch fuel is in the tank. We recommendkeeping the tank over 1/4 full. When thelow fuel warning light illuminates orwhen the needle is near E, refuel as soonas possible.

Low fuel warning light

NOTE

The direction of the arrow ( ) shownthat the fuel-filler lid is on the left sideof the vehicle.

qDashboard Illumination

Rotate the thumb wheel to adjust thebrightness of the instrument cluster andother illuminations in the dashboard.

NOTE

l The brightness of dashboardilluminations (except instrumentcluster) can be adjusted when theheadlight switch is in the orposition.

l (Black-out meter)The brightness of the instrumentcluster illumination can be adjustedwhen the headlight switch is in anyposition.

Dim

Bright

Canceling the illumination dimmer(Black-out meter and dashboardilluminations)

When the headlight switch is in the orposition, the illumination of the

instrument cluster and the informationdisplay dims.

Driving Your Mazda


5-27


Form No.8W89-EA-06K

Black plate (160,1)

When driving on snowy or foggy roads,or in other situations when the instrumentcluster or information display's visibilityis reduced due to glare from surroundingbrightness, cancel the illuminationdimmer and increase the illuminationintensity.

To cancel the illumination dimmer, rotatethe thumb wheel upward fully. You mayhear a click sound and the illuminationdimmer will be canceled.

NOTE

If the dashboard illumination switch iskept at the illumination dimmer cancelposition, the instrument cluster and theinformation display will not dim whenthe headlight switch is turned to theor position again.

5-28

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (161,1)

Warning/Indicator Lights

Warning/Indicator lights will appear in any of the highlighted areas

Signal Warning/Indicator Lights Page

Brake System Warning Light 5-31

Charging System Warning Light 5-32

Engine Oil Pressure Warning Light 5-33

Check Engine Light 5-33

ABS Warning Light 5-31

Air Bag/Front Seat Belt Pretensioner System Warning Light 5-34

Low Fuel Warning Light 5-34

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

5-29


Form No.8W89-EA-06K

Black plate (162,1)

Signal Warning/Indicator Lights Page

Seat Belt Warning Light/Beep 5-34

Door-Ajar Warning Light 5-36

Low Washer Fluid Level Warning Light 5-36

Automatic Transaxle Warning Light 5-36

Security Indicator Light 5-36

Headlight High-Beam Indicator Light 5-37

Shift Position Indicator Light 5-37

TCS Indicator Light 5-37

TCS OFF Indicator Light 5-38

Cruise Main Indicator Light 5-38

Cruise Set Indicator Light 5-38

Light-On Indicator Light 5-38

Turn Signal/Hazard Warning Indicator Lights 5-39

5-30

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (163,1)

qBrake System Warning Light

This warning has the following functions:

Parking brake warning

The light comes on when the parkingbrake is applied with the ignition switchin the START or ON position. It goes offwhen the parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brakeis fully released, you may have a brakeproblem.

Drive to the side of the road and park offthe right-of-way.

You may notice that the pedal is harder topush or that it may go closer to the floor.In either case, it will take longer to stopthe vehicle.

1. With the engine stopped, check thebrake fluid level immediately and addfluid as required (page 8-22).

2. After adding fluid, check the lightagain.

If the warning light remains on, or if thebrakes do not operate properly, do notdrive the vehicle. Have it towed to anAuthorized Mazda Dealer.

Even if the light goes out have your brakesystem inspected as soon as possible byan Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimesan indicator of leakage. Consult anAuthorized Mazda Dealer as soon aspossible even if the brake light is nolonger illuminated.

WARNINGDo not drive with the brake systemwarning light illuminated. Contact anAuthorized Mazda Dealer to have thebrakes inspected as soon as possible:Driving with the brake system warninglight illuminated is dangerous. Itindicates that your brakes may notwork at all or that they couldcompletely fail at any time. If this lightremains illuminated, after checkingthat the parking brake is fullyreleased, have the brakes inspectedimmediately.

qABS Warning Light

The warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.

Driving Your Mazda


5-31


Form No.8W89-EA-06K

Black plate (164,1)

If the ABS warning light stays on whileyou're driving, the ABS control unit hasdetected a system malfunction. If thisoccurs, your brakes will function normallyas if the vehicle had no ABS.Should this happen, consult an AuthorizedMazda Dealer as soon as possible.

NOTE

When the engine is jump-started tocharge the battery, uneven rpm occursand the ABS warning light comes on.This is due to a weak battery, not amalfunction.Recharge the battery.

qElectronic Brake ForceDistribution System Warning

If the electronic brake force distributioncontrol unit determines that somecomponents are operating incorrectly, thecontrol unit may turn the brake systemwarning light and the ABS warning lighton at the same time. The problem is likelyto be an electronic brake force distributionsystem.

WARNINGDo not drive with both the ABSwarning light and brake warning lightilluminated. Have the vehicle towed toan Authorized Mazda Dealer to havethe brakes inspected as soon aspossible:Driving when the brake systemwarning light and ABS warning lightare illuminated at the same time isdangerous.When both lights are illuminated, therear wheels could lock more quickly inan emergency stop than under normalcircumstances.

qCharging System Warning Light

This warning light illuminates when theignition switch is turned to the ONposition and turns off when the engine isstarted.

If the warning light illuminates whiledriving, it indicates a malfunction of thealternator or of the charging system.Drive to the side of the road and park offthe right-of-way. Consult an AuthorizedMazda Dealer.

5-32

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (165,1)

CAUTIONDon't continue driving when thecharging system warning light isilluminated because the engine couldstop unexpectedly.

qEngine Oil Pressure Warning Light

This warning light illuminates when theignition switch is turned to the ONposition and turns off when the engine isstarted.

This warning light indicates low engineoil pressure.

If the light illuminates while driving:

1. Drive to the side of the road and parkoff the right-of-way on level ground.

2. Turn off the engine and wait 5 minutesfor the oil to drain back into the oilpan.

3. Inspect the engine oil level (page 8-19).If it's low, add oil.

4. Start the engine and check the warninglight.

If the light remains illuminated even afteryou add oil, stop the engine immediatelyand have your vehicle towed to anAuthorized Mazda Dealer.

CAUTIONDon't run the engine if oil pressure islow. It could result in extensive enginedamage.

qCheck Engine Light

This indicator light illuminates when theignition switch is turned to the ONposition and goes off when the engine isstarted.

If this light comes on while driving, thevehicle may have a problem. It isimportant to note the driving conditionswhen the light came on and consult anAuthorized Mazda Dealer.

The check engine light may come on inthe following cases:

l The fuel tank level being very low orapproaching empty.

l The engine's electrical system has aproblem.

l The emission control system has aproblem.

l The fuel-filler cap is missing or nottightened securely.

If the check engine light remains on orflashes continuously, do not drive at highspeeds and consult an Authorized MazdaDealer as soon as possible.

Driving Your Mazda


5-33


Form No.8W89-EA-06K

Black plate (166,1)

qAir Bag/Front Seat BeltPretensioner System Warning Light

If the air bag/front seat belt pretensionersystem is working properly, the warninglight illuminates when the ignition switchis turned to the ON position or after theengine is cranked. The warning light turnsoff after a specified period of time.

A system malfunction is indicated if thewarning light constantly flashes,constantly illuminates or does notilluminate at all when the ignition switchis turned to the ON position. If either ofthese occur, consult an Authorized MazdaDealer as soon as possible. The systemmay not work in an accident.


qLow Fuel Warning Light

Low fuel warning light

This warning light in the fuel gaugesignals that the fuel tank will soon beempty.Refuel as soon as possible.

qSeat Belt Warning Light/Beep

The seat belt warning light illuminatesand a beep sound will be heard if thedriver's seat belt is not fastened when theignition switch is turned to the ONposition.

Conditions of operation

Condition Result

The driver's seat belt is notfastened when the ignitionswitch is turned to the ONposition.

The warning lightflashes and a beepsound will be heardfor about 6 seconds.

The driver's seat belt isfastened while the warninglight and the beep sound areactivated.

The warning lightturns off and the beepsound stops.

The driver's seat belt isfastened before the ignitionswitch is turned to the ONposition.

The warning light willnot illuminate and thebeep sound will not beheard.

5-34

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (167,1)

Belt minder

NOTE

The belt minder can be deactivated.Consult an Authorized Mazda Dealer todeactivate and restore the seat beltminder.

Driver's seat

The belt minder is a supplementalwarning to the seat belt warning function.If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, the warning light/beepoperates to give you further remindersaccording to the chart below.

Condition

Vehicle speed

Between 0― 20km/h

(0 ― 12 mph)

20 km/h(12 mph) or

more

Seat belt

Indicator

Beep



Front passenger seat

The seat belt warning light/beep remindsthe front passenger to fasten the seat beltaccording to the chart below.

Condition

Vehicle speed

Between 0― 20km/h

(0 ― 12 mph)

20 km/h(12 mph) or

more

Seat belt(Driver)

Seat belt(Passenger)

Indicator

Beep



NOTE

l To allow the front passenger seatweight sensor to function properly,do not place and sit on an additionalseat cushion on the front passengerseat. The sensor may not functionproperly because the additional seatcushion could cause sensorinterference.

l Placing packages, luggage, pets orother items on the front passengerseat may cause the front passengerbelt minder warning light and beepto operate depending on the weightof the item.

Driving Your Mazda


5-35


Form No.8W89-EA-06K

Black plate (168,1)

qDoor-Ajar Warning Light

This warning light comes on when anydoor isn't securely closed.

qLowWasher Fluid LevelWarning Lightí

This warning light indicates that littlewasher fluid remains. Add fluid (page8-27).

qAutomatic Transaxle Warning Light

This warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.The light illuminates when the transaxlehas a problem.

CAUTIONIf the automatic transaxle warning lightilluminates, the transaxle has anelectrical problem. Continuing to driveyour Mazda in this condition couldcause damage to your transaxle.Consult an Authorized Mazda Dealer assoon as possible.

qSecurity Indicator Light

This indicator light starts flashing every 2seconds when the ignition switch is turnedfrom the ON to the ACC position and theimmobilizer system is armed.

The light stops flashing when the ignitionswitch is turned to the ON position withthe correct ignition key.At this time, the immobilizer system isdisarmed and the light illuminates forabout 3 seconds and then goes out.

If the engine doesn't start with the correctignition key, and the security indicatorlight keeps illuminating or flashing, thesystem may have a malfunction. Consultan Authorized Mazda Dealer.

5-36

Driving Your Mazda

íSome models.



Form No.8W89-EA-06K

Black plate (169,1)

qHeadlight High-Beam IndicatorLight

This light indicates one of two things:

l The high-beam headlights are on.

l The turn signal lever is in the flash-to-pass position.

qShift Position Indicator Light(Automatic Transaxle)

This indicates the selected shift positionwhen the ignition switch is in the ONposition.



When the shift lever is in the D or Mposition, the numeral for the selected geardisplays.

qTCS Indicator Lightí

This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS isoperating, the indicator light flashes.

If the light stays on, the TCS may have amalfunction and it may not operatecorrectly. Take your vehicle to anAuthorized Mazda Dealer.

NOTE

l In addition to the indicator lightflashing, a slight lugging sound willcome from the engine. This indicatesthat the TCS is operating properly.

l On slippery surfaces, such as freshsnow, it will be impossible toachieve high rpm when the TCS ison.

Driving Your Mazda


5-37íSome models.


Form No.8W89-EA-06K

Black plate (170,1)

qTCS OFF Indicator Lightí

This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position.It also comes on when the TCS OFFswitch is pressed and TCS is switched off.

If the light stays on when the TCS is notswitched off, take your vehicle to anAuthorized Mazda Dealer. The TCS mayhave a malfunction.

NOTE

(3.0-liter engine model)After starting the engine when thecoolant temperature is extremely low,the TCS is automatically turned off. Atthis time, the TCS OFF indicator lightwill remain on, but this does notindicate an abnormality. After theengine has warmed, TCS will resumenormal operation and the indicator lightwill go out.

qCruise Main Indicator Light

This light comes on when the ON/OFFswitch is pressed and the cruise controlsystem is activated.

qCruise Set Indicator Light

This light comes on when a cruising speedis set.

qLight-On Indicator Light (Black-out meter)

This indicator light comes on when theexterior lights and dashboard illuminationare on.

5-38

Driving Your Mazda

íSome models.



Form No.8W89-EA-06K

Black plate (171,1)

qTurn-Signal/Hazard WarningIndicator Lights

When operating the turn signal lights, theleft or right turn signal indicator lightflashes to indicate which turn signal lightis operating (page 5-42).

When operating the hazard warninglights, both turn signal indicator lightsflash (page 5-46).

NOTE

If an indicator light remains illuminated(does not flash) or if it flashesabnormally, one of the turn signal bulbsmay be burned out.

Beep Sounds

qSeat Belt Warning Beep

If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, a beep sound will be heardfor about 6 seconds.If the driver's seat belt is not fastened andthe vehicle is driven at a speed faster thanabout 20 km/h (12 mph), a beep soundwill be heard again for a specified periodof time.Refer to Seat Belt Warning Light/Beep onpage 5-34.

qIgnition Key Reminder

If the ignition switch is in the LOCK orACC position with the key inserted, acontinuous beep sound will be heardwhen the driver's door is opened.

qLights-On Reminder

If lights are on and the key is removedfrom the ignition switch, a continuousbeep sound will be heard when thedriver's door is opened.

Driving Your Mazda


5-39


Form No.8W89-EA-06K

Black plate (172,1)

Lighting Control

qHeadlights

To turn on the lights, turn the headlightswitch on the end of the control lever.

Switch Position

Headlights Off Off On

TaillightsParking lightsLicense lightsSide-marker lightsDashboardillumination

Off On On

NOTE

l If the light switch is left on, the lightswill automatically switch off 30seconds after turning the ignitionswitch to the LOCK position orremoving the key.

The lights will automatically switchback on when the ignition switch isturned to the ACC or ON position.

l To prevent discharging the battery,don't leave the lights on while theengine is off unless safety requiresthem.

Xenon fusion headlight bulbs í

The low-beam bulbs of the headlightshave xenon fusion bulbs that produce abright white beam over a wide area.

WARNINGDo not replace the xenon fusion bulbsyourself:Replacing the xenon fusion bulbsyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Consult an AuthorizedMazda Dealer when the replacement isnecessary.

NOTE

If the headlights flash, or the brightnessweakens, the bulb-life may be depletedand a replacement is necessary. Consultan Authorized Mazda Dealer.

qLights-On Reminder

If lights are on and the key is removedfrom the ignition switch, a continuousbeep sound will be heard when thedriver's door is opened.

5-40

Driving Your Mazda

íSome models.

Switches and Controls


Form No.8W89-EA-06K

Black plate (173,1)

qHeadlight High-Low Beam

Push the lever forward for high beam.Pull back to original position for lowbeam.

High beam

Low beam

qFlashing the Headlights

To flash the headlights, pull the lever fullytoward you. The headlight switch doesnot need to be on, and the lever will returnto the normal position when released.

qHeadlight Levelingí

The number of passengers and weight ofcargo in the luggage compartment changethe angle of the headlights.The headlight leveling switch adjusts thisangle.

Select the proper setting from the following chart.

Front seat Rearseat

LoadSwitchPositionDriver Passenger

× ― ― ― 0

× × ― ― 0

× × × ― 1

× × × × 2

× ― ― × 3

×: Yes―: No

qDaytime Running Lights (Canada)

In Canada, vehicles must be driven withthe headlights on during daytimeoperation.

For that reason, the daytime running lightsautomatically turn on when the ignitionswitch is turned to the ON position.

NOTE

The Daytime Running Lights turn offwhen the parking brake is applied.

Driving Your Mazda


5-41íSome models.


Form No.8W89-EA-06K

Black plate (174,1)

Turn and Lane-ChangeSignals

qTurn Signal

Move the signal lever down (for a leftturn) or up (for a right turn) to the stopposition. The signal will self-cancel afterthe turn is completed.

If the indicator light continues to flashafter a turn, manually return the lever toits original position.

Right turn

Left turn

OFF

Right lane change

Left lane change

Green indicators on the dashboard showwhich signal is working.

Lane-change signals

Move the lever slightly toward thedirection of the change ―until theindicator flashes― and hold it there. Itwill return to the off position whenreleased.

NOTE

If an indicator light stays on withoutflashing or if it flashes abnormally, oneof the turn signal bulbs may be burnedout.

Fog Lightsí

Use this switch to turn on the fog lights.They help you to see as well as to be seen.

To turn the front fog lights on, rotate thefog light switch to the position.The headlight switch must be in theposition to turn on the front fog lights.

Fog light switch

To turn them off, rotate the fog lightswitch to the OFF position or turn theheadlight switch to the or OFFposition.

NOTE

The fog lights will turn off when theheadlights are set at high beam.

5-42

Driving Your Mazda

íSome models.



Form No.8W89-EA-06K

Black plate (175,1)

Windshield Wipers andWasher

The ignition switch must be in the ONposition.

WARNINGUse only windshield washer fluid orplain water in the reservoir:Using radiator antifreeze as washerfluid is dangerous. If sprayed on thewindshield, it will dirty the windshield,affect your visibility, and could resultin an accident.

Do not use the washer without firstwarming the windshield and never useplain tap water:Using windshield washer fluid withoutanti-freeze protection in freezingtemperatures is dangerous. Thewasher fluid could freeze on thewindshield and block your vision. Youcould have an accident.

NOTE

Because heavy ice and snow can jamthe wiper blades, the wiper motor isprotected from motor breakdown,overheating and possible fire by acircuit breaker. This mechanism willautomatically stop operation of theblades, but only for about 5 minutes.If this happens, turn off the wiperswitch and park off the right-of-way,and remove the snow and ice.After 5 minutes, turn on the switch andthe blades should operate normally. Ifthey don't resume functioning, consultan Authorized Mazda Dealer as soon aspossible. Drive to the side of the roadand park off the right-of-way. Wait untilthe weather clears before trying to drivewith the wipers inoperative.

qWindshield Wipers

Turn the wipers on by pulling the leverdown.MIST ― MistINT ― Intermittent1 ― Low speed2 ― High speed

For a single wiping cycle, push the leverup to MIST.

Driving Your Mazda


5-43


Form No.8W89-EA-06K

Black plate (176,1)

Variable-speed intermittent wipers

Set the lever to INT and choose theinterval timing by rotating the ring.

INT ring

qWindshield Washer

Pull the lever toward you and hold it tospray washer fluid.

OFF

Washer

NOTE

With the wiper lever in the OFF or INTposition, the wipers will operatecontinuously until the lever is released.

If the washer doesn't work, inspect thefluid level (page 8-27). If it's OK, consultan Authorized Mazda Dealer.

Rear Window Wiper andWasherí


qRear Window Wiper

Turn the wiper on by turning the rearwiper/washer switch.ON ― NormalINT ― Intermittent

qRear Window Washer

To spray washer fluid, turn the rear wiper/washer switch to the position. Afterthe switch is released, the washer willstop.If the washer doesn't work, inspect thefluid level (page 8-27). If it's OK and thewasher still doesn't work, consult anAuthorized Mazda Dealer.

5-44

Driving Your Mazda

íSome models.



Form No.8W89-EA-06K

Black plate (177,1)

Rear Window DefrosterThe rear window defroster clears frost,fog, and thin ice from the rear window.


Press the switch to turn on the rearwindow defroster. The rear windowdefroster operates for about 15 minutesand turns off automatically.The indicator light illuminates duringoperation.

To turn off the rear window defrosterbefore the 15 minutes has elapsed, pressthe switch again.

Manual Type Air-Conditioning

Fully Automatic Type Air-Conditioning

CAUTIONDon't use sharp instruments or windowcleaners with abrasives to clean theinside of the rear window surface. Theymay damage the defroster grid insidethe window.

NOTE

This defroster is not designed formelting snow. If there is anaccumulation of snow on the rearwindow, remove it before using thedefroster.

Driving Your Mazda


5-45


Form No.8W89-EA-06K

Black plate (178,1)

HornTo sound the horn, press around themark on the steering wheel.

Hazard Warning FlasherThe hazard warning lights should alwaysbe used when you stop on or near aroadway.

The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it.

Depress the hazard warning flasher and allfour turn signals will flash.

NOTE

l The turn signals don't work when thehazard warning lights are on.

l Check local regulations about the useof hazard warning lights while thevehicle is being towed. They mayforbid it.

5-46

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (179,1)

HomeLink WirelessControl Systemí

NOTE

HomeLink and HomeLink house areregistered trademarks of JohnsonControls.

The HomeLink system replaces up to 3hand-held transmitters with a single built-in component in the auto-dimming mirror.Pressing the HomeLink button on theauto-dimming mirror activates garagedoors, gates and other devicessurrounding your home.

HomeLink button

Indicator light

WARNINGDo not use the HomeLink system withany garage door opener that lacks thesafety stop and reverse feature:Using the HomeLink system with anygarage door opener that lacks thesafety stop and reverse feature asrequired by federal safety standards isdangerous. (This includes garagedoors manufactured before April 1,1982.)Using these garage door openers canincrease the risk of serious injury ordeath. For further information,contact HomeLink at 1-800-355-3515or www.homelink.com or yourAuthorized Mazda Dealer.

Always check the areas surroundinggarage doors and gates for people orobstructions before programming orduring operation of the HomeLimksystem:Programming or operating theHomeLink system without verifyingthe safety of areas surrounding garagedoors and gates is dangerous andcould result in an unexpected accidentand serious injury if someone were tobe hit.

CAUTIONHomeLink has been tested andcomplies with FCC and IndustryCanada rules. Changes or modificationsnot expressly approved by the partyresponsible for compliance could voidthe user's authority to operate thedevice.

Driving Your Mazda


5-47íSome models.


Form No.8W89-EA-06K

Black plate (180,1)

NOTE

FCC ID: NZLOBIHL3CANADA:4112A-OBIHL3This device complies with FCC rulespart 15. Operation is subject to thefollowing conditions:1- This device may not cause anyharmful interference and2- This device must accept anyinterference that may be receivedincluding interference that may causeundesired operation.

NOTE

The programming will not be erasedeven if the battery is disconnected.

qPre-programming the HomeLinkSystem

NOTE

It is recommended that a new battery beplaced in the hand-held transmitter ofthe device being programmed toHomeLink for quicker training andaccurate transmission of the radio-frequency signal.

l Verify that there is a remote controltransmitter available for the device youwould like to program.

l Disconnect the power to the device.

qProgramming the HomeLink System

CAUTIONWhen programming a garage dooropener or a gate, disconnect the powerto these devices before performingprogramming, as continuous operationof the devices could damage the motor.

The HomeLink system provides 3 buttonswhich can be individually selected andprogrammed using the transmitters forcurrent, on-market devices as follows:

1. Press and hold the two outerHomeLink buttons (buttons one andthree)― releasing only when theindicator light begins to flash (after 20seconds). Do not hold the buttons forlonger than 30 seconds and do notrepeat step 1 to program a second and/or third hand-held transmitter to theremaining two HomeLink buttons.

2. Position the end of your hand-heldtransmitter 2.5―7.5 cm (1―3 inches)away from the HomeLink button youwish to program while keeping theindicator light in view.

3. Simultaneously press and hold both thechosen HomeLink and hand-heldtransmitter buttons. Do not release thebuttons until step 4 has beencompleted.

NOTE

Some gate operators and garage dooropeners may require you to replace thisProgramming Step 3 with proceduresnoted in the “Gate Operator/CanadianProgramming” section.

5-48

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (181,1)

4. After the HomeLink indicator lightchanges from a slow to a rapidlyblinking light, release both theHomeLink and hand-held transmitterbuttons.

NOTE

If the HomeLink indicator light doesnot change to a rapidly blinking light,contact HomeLink atwww.homelink.com or call 1-800-355-3515 for assistance.

5. Press and hold the just-trainedHomeLink button and observe theindicator light.

If the indicator light stays on constantly,programming is complete and yourdevice should activate when theHomeLink button is pressed and released.

NOTE

To program the remaining twoHomeLink buttons, begin with“Programming” ― step 2. Do notrepeat step 1.

If the indicator light blinks rapidly fortwo seconds and then turns to aconstant light, continue with“Programming” steps 6―8 to completethe programming of a rolling codeequipped device (most commonly agarage door opener).

6. At the garage door opener receiver(motor-head unit) in the garage, locatethe “learn” or “smart” button. This canusually be found where the hangingantenna wire is attached to the motor-head unit.

7. Firmly press and release the “learn” or“smart” button. (The name and color ofthe button may vary by manufacturer.)

NOTE

There are 30 seconds in which toinitiate step 8.

8. Return to the vehicle and firmly press,hold for two seconds and release theprogrammed HomeLink button. Repeatthe “press/hold/release” sequence asecond time, and, depending on thebrand of the garage door opener (orother rolling code equipped device),repeat this sequence a third time tocomplete the programming process.

HomeLink should now activate yourrolling code equipped device.

NOTE

To program the remaining twoHomeLink buttons, begin with“Programming” ― step 2. Do notrepeat step 1.

For questions or comments, please contactHomeLink at www.homelink.com or 1-800-355-3515.

Driving Your Mazda


5-49


Form No.8W89-EA-06K

Black plate (182,1)

qGate operator/CanadianProgramming

Canadian radio-frequency laws requiretransmitter signals to “time-out” (or quit)after several seconds of transmission ―which may not be long enough forHomeLink to pick up the signal duringprogramming. Similar to this Canadianlaw, some U.S. gate operators aredesigned to “time-out” in the samemanner.

If you live in Canada or you are havingdifficulties programming a gate operatorby using the “Programming” procedures(regardless of where you live), replace“Programming HomeLink” step 3 withthe following:

NOTE

If programming a garage door opener orgate operator, it is advised to unplug thedevice during the “cycling” process toprevent possible overheating.

Continue to press and hold the HomeLinkbutton while you press and release―every two seconds (“cycle”) your hand-held transmitter until the frequency signalhas successfully been accepted byHomeLink. (The indicator light will flashslowly and then rapidly.)Proceed with “Programming” step 4 tocomplete.

qOperating the HomeLink System

Press the programmed HomeLink buttonto operate a programmed device. Thecode will continue being transmitted for amaximum of 20 seconds.

qReprogramming the HomeLinksystem

To program a device to HomeLink using aHomeLink button previously trained,follow these steps:

1. Press and hold the desired HomeLinkbutton. DO NOT release the button.

2. The indicator light will begin to flashafter 20 seconds. Without releasing theHomeLink button, proceed with“Programming” - step 2.

qErasing Programmed HomeLinkButtons

To erase the existing programming fromall three operating channels, press andhold the two outside buttons ( , )on the auto-dimming mirror until theHomeLink indicator light begins to flashafter approximately 20 seconds.Verify that the programming has beenerased when you resell the vehicle.

5-50

Driving Your Mazda



Form No.8W89-EA-06K

Black plate (183,1)

6 Interior Comfort

Use of various features for drive comfort, including air-conditioning and audiosystem.

Climate Control System ............................................................... 6-2Operating Tips ........................................................................... 6-2Vent Operation .......................................................................... 6-3Types of the Climate Control System ....................................... 6-5Manual Type ............................................................................. 6-6Fully Automatic Type ............................................................. 6-11

Audio System ............................................................................... 6-16Antenna ................................................................................... 6-16Operating Tips for Audio System ........................................... 6-16Audio Set ................................................................................ 6-27Audio Control Switch Operation (Steering Wheel)í ............. 6-45Safety Certification ................................................................. 6-48

Interior Equipment ..................................................................... 6-49Sunvisors ................................................................................. 6-49Interior Lights ......................................................................... 6-49Information Display ................................................................ 6-52Cup Holder .............................................................................. 6-54Bottle Holder ........................................................................... 6-55Storage Compartments ............................................................ 6-56Accessory Sockets .................................................................. 6-59

6-1íSome models.


Form No.8W89-EA-06K

Black plate (184,1)

Operating Tips

qOperating the Climate ControlSystem

Operate the climate control system withthe engine running.

NOTE

To prevent the battery from beingdischarged, do not leave the fan controldial on for a long period of time withthe ignition switch in the ACC positionwhen the engine is not running.

qClearing the Air Inlet

Clear all obstructions like leaves, snowand ice from the hood and the air inlet inthe cowl grille to improve the systemefficiency.

qFoggy Windows

The windows may fog up easily in humidweather. Use the climate control system todefog the windows.

To help defog the windows, operate theair conditioner to dehumidify the air.

NOTE

The air conditioner may be used alongwith the heater to dehumidify the air.

qOutside/Recirculated Air Position

Use the outside air position in normalconditions. The recirculated air positionshould be used only when driving ondusty roads or for quick cooling of theinterior.

qParking in Direct Sunlight

If the vehicle has been parked in directsunlight during hot weather, open thewindows to let warm air escape, then runthe climate control system.

qNot Using for a Long Period

Run the air conditioner about 10 minutesat least once a month to keep internalparts lubricated.

qCheck the Refrigerant before theWeather Gets Hot

Have the air conditioner checked beforethe weather gets hot. Lack of refrigerantmay make the air conditioner lessefficient. Consult an Authorized MazdaDealer for refrigerant inspection.

The air conditioner is filled withHFC134a (R134a), a refrigerant that willnot damage the ozone layer.If the air conditioner is low on refrigerantor has a malfunction, consult anAuthorized Mazda Dealer.

qReplacement of the Cabin Air Filter

If your vehicle is equipped with an airfilter for the air conditioner, it is necessaryto change the filter periodically asindicated in scheduled maintenance (page8-3). Consult an Authorized MazdaDealer for replacement of the cabin airfilter.

6-2

Interior Comfort

Climate Control System


Form No.8W89-EA-06K

Black plate (185,1)

Vent Operation

qAdjusting the Vents

Directing airflow

1. Press the upper part of the air vent toopen it.

2. Rotate the air vent left and right toadjust the direction of airflow.

NOTE

When using the air conditioner, mistmay come out from the vents. This isnot a sign of trouble but a result ofhumid air being suddenly cooled.

Interior Comfort


6-3


Form No.8W89-EA-06K

Black plate (186,1)

qSelecting the Airflow Mode

Defroster and Floor VentsDashboard Vents

Floor Vents

Defroster VentsDashboard and Floor Vents

6-4

Interior Comfort



Form No.8W89-EA-06K

Black plate (187,1)

Types of the Climate Control SystemManual type and fully automatic type climate control systems are explained separately.Check your vehicle's climate control type and read the appropriate pages.Manual Type ............................................................................................................ page 6-6

Fully Automatic Type ............................................................................................. page 6-11

Interior Comfort


6-5


Form No.8W89-EA-06K

Black plate (188,1)

Manual Type

A/C Switch

Air intake selector

Mode selector dialFan control dialTemperature control dial

qControl Switches

Temperature control dial

HotCold

This dial controls temperature. Turn itclockwise for hot and counterclockwisefor cold.

Fan control dial

This dial allows variable fan speeds.0―Fan off1―Low speed2―Medium low speed3―Medium high speed4―High speed

6-6

Interior Comfort



Form No.8W89-EA-06K

Black plate (189,1)

Mode selector dial

Turn the mode selector dial to selectairflow mode (page 6-4).

A/C switch

Push the A/C switch to turn the airconditioner on. The indicator light on theswitch will illuminate when the fancontrol dial is set at position 1, 2, 3, or 4.

Push the switch once again to turn the airconditioner off.

NOTE

The air conditioner may not functionwhen the outside temperatureapproaches 0 °C (32 °F).

Air intake selector

This switch controls the source of airentering the vehicle.

Press the switch to alternate between theand positions. The indicator

light for the selected mode will illuminate.

It is recommended that under normalconditions the switch be kept in theoutside air position.

Outside air position ( )

Outside air is taken into the vehicle. Usethis position for normal ventilation andheating.

Recirculated air position ( )

Outside air is shut off. Air within thevehicle is recirculated.

This position can be used when driving ona dusty road or in similar conditions. Italso helps to provide quicker cooling ofthe interior.

Interior Comfort


6-7


Form No.8W89-EA-06K

Black plate (190,1)

WARNING

Do not use the position in coldor rainy weather:Using the position in cold orrainy weather is dangerous as it willcause the windows to fog up. Yourvision will be hampered, which couldlead to a serious accident.

qHeating

1. Set the mode selector dial to theposition.

2. Set the air intake selector to theposition.

3. Set the temperature control dial to thehot position.

4. Set the fan control dial to the desiredspeed.

5. If dehumidified heating is desired, turnon the air conditioner.

NOTE

l If the windshield fogs up easily, setthe mode selector dial to theposition.

l If cooler air is desired at face level,set the mode selector dial at theposition and adjust the temperaturecontrol dial to maintain maximumcomfort.

l The air to the floor is warmer thanair to the face (except when thetemperature control dial is set at theextreme hot or cold position).

qCooling (With Air Conditioner)


2. Set the temperature control dial to thecold position.


4. Turn on the air conditioner by pressingthe A/C switch.

5. Adjust the fan control dial andtemperature control dial to maintainmaximum comfort.

CAUTIONWhen using the air conditioner whiledriving up long hills or in heavy traffic,closely monitor the temperature gauge(page 5-26).The air conditioner may cause engineoverheating. If the gauge indicatesoverheating, turn the air conditioner off(page 7-15).

6-8

Interior Comfort



Form No.8W89-EA-06K

Black plate (191,1)

NOTE

l When maximum cooling is desired,set the temperature control dial to theextreme cold position and set the airintake selector to the position,then set the fan control dial toposition 4.

l If warmer air is desired at floor level,set the mode selector dial at theposition and adjust the temperaturecontrol dial to maintain maximumcomfort.

l The air to the floor is warmer thanair to the face (except when thetemperature control dial is set at theextreme hot or cold position).

qVentilation



3. Set the temperature control dial to thedesired position.


qWindshield Defrosting and Defogging




WARNING

Do not defog the windshield using theposition with the temperature

control set to the cold position:Using the position with thetemperature control set to the coldposition is dangerous as it will causethe outside of the windshield to fog up.Your vision will be hampered, whichcould lead to a serious accident. Setthe temperature control to the hot orwarm position when using theposition.

NOTE

l For maximum defrosting, set thetemperature control dial to theextreme hot position and the fancontrol dial to position 4.

l If warm air is desired at the floor, setthe mode selector dial to theposition.

l In the , or position, the airconditioner is automatically turnedon (however, the indicator light doesnot illuminate) and the positionis automatically selected to defrostthe windshield.In the or position, theposition cannot be changed to the

position.

Interior Comfort


6-9


Form No.8W89-EA-06K

Black plate (192,1)

qDehumidifying (With AirConditioner)

Operate the air conditioner in cool or coldweather to help defog the windshield andside windows.

1. Set the mode selector dial to thedesired position.




5. Turn on the air conditioner by pressingthe A/C switch.

NOTE

One of the functions of the airconditioner is dehumidifying the airand, to use this function, thetemperature does not have to be set tocold. Therefore, set the temperaturecontrol dial to the desired position (hotor cold) and turn on the air conditionerwhen you want to dehumidify the cabinair.

6-10

Interior Comfort



Form No.8W89-EA-06K

Black plate (193,1)

Fully Automatic TypeClimate control information is displayed on the information display.

Fan control dial Air intake selector

A/C switch


OFF switch Mode selector switch

Windshield defroster switch

Auto switch

qControl Switches

AUTO switch

By pressing the AUTO switch thefollowing functions will be automaticallycontrolled in accordance with the settemperature:

l Airflow temperature

l Amount of airflow

l Selection of airflow mode

l Outside/Recirculated air selection

l Air conditioner operation

NOTE

AUTO switch indicator light

l When on, it indicates AUTOoperation, and the system willfunction automatically.

l When off, it indicates the operationof other switches such as the modeselector switch, fan control dial, A/Cswitch and windshield defrosterswitch. Other functions will continueto operate automatically.

Interior Comfort


6-11


Form No.8W89-EA-06K

Black plate (194,1)

OFF switch

Pressing the OFF switch shuts off theclimate control system.


HotCold

This dial controls temperature.Turn itclockwise for hot and counterclockwisefor cold.

Fan control dial

FastSlow

The fan has seven speeds. The selectedspeed will be displayed.

Mode selector switch

The desired airflow mode can be selected(page 6-4).

NOTE

l With the airflow mode set toposition and the temperature controldial set at a medium temperature,heated air is directed to the feet and acomparably lower air temperaturewill flow through the central, left andright vents.

l To set the air vent to , press thewindshield defroster switch.

A/C switch

With the AUTO or fan control dial ON,press the A/C switch to select the airconditioning (cooling/dehumidifyingfunctions) on or off.

6-12

Interior Comfort



Form No.8W89-EA-06K

Black plate (195,1)

NOTE

The air conditioner may not functionwhen the outside temperatureapproaches 0 °C (32 °F). (Indicatorremains on even when system is off.)

Air intake selector

Outside or recirculated air positions canbe selected. Press the switch to selectoutside/recirculated air positions.

Recirculated air position ( )

Use this position when going throughtunnels, driving in congested traffic (highengine exhaust areas) or when quickcooling is desired.

Outside air position ( )

Use this position for normal conditionsand defogging.

WARNING

Do not use the position in coldor rainy weather:Using the position in cold orrainy weather is dangerous as it willcause the windows to fog up. Yourvision will be hampered, which couldlead to a serious accident.

Windshield defroster switch

Press the switch to defrost the windshieldand front door windows.

qOperation of Automatic AirConditioning

1. Press the AUTO switch. Selection ofthe airflow mode, air intake selectorand amount of airflow will beautomatically controlled.

2. Use the temperature control dial toselect a desired temperature.

HotCold

To turn off the system, press the OFFswitch.

Interior Comfort


6-13


Form No.8W89-EA-06K

Black plate (196,1)

NOTE

l Setting the temperature to maximumhigh or low will not provide thedesired temperature at a faster rate.

l When selecting heat, the system willrestrict airflow until it has warmed toprevent cold air from blowing out ofthe vents.

qWindshield Defrosting and Defogging

Press the windshield defroster switch.In this position, the position isautomatically selected, and the airconditioner automatically turns on(however, the indicator light does notilluminate). The air conditioner willdirectly dehumidify the air to the frontwindshield and side windows (page 6-4).Airflow amount will be increased.

WARNING

Set the temperature control to the hotor warm position when defogging (position):Using the position with thetemperature control set to the coldposition is dangerous as it will causethe outside of the windshield to fog up.Your vision will be hampered, whichcould lead to a serious accident.

NOTE

Use the temperature control dial toincrease the air flow temperature anddefog the windshield more quickly.

qSunlight/Temperature Sensor

The fully automatic air conditionerfunction measures inside and outsidetemperatures, and sunlight. It then setstemperatures inside the passengercompartment accordingly. Do not obstructthe sensors.

Sunlight sensor

6-14

Interior Comfort



Form No.8W89-EA-06K

Black plate (197,1)

Interior temperature sensor

Interior Comfort


6-15


Form No.8W89-EA-06K

Black plate (198,1)

Antenna

qDetachable Type

To remove the antenna, turn itcounterclockwise.To install the antenna, turn it clockwise.Make sure the antenna is securelyinstalled.

Install

Remove

CAUTIONl To prevent damage to the antenna,remove it before entering a car washfacility or passing beneath a lowoverhead clearance.

l Be careful around the antenna whenremoving snow from the roof.Otherwise the antenna could bedamaged.

NOTE

When leaving your vehicle unattended,we recommend that you remove theantenna and store it inside the vehicle.

Operating Tips for AudioSystem

WARNINGDo not adjust the audio controlswitches while driving the vehicle:Adjusting the audio while driving thevehicle is dangerous as it coulddistract your attention from the vehicleoperation which could lead to aserious accident. Always adjust theaudio while the vehicle is stopped.Even if the audio control switches areequipped on the steering wheel, learnto use the switches without lookingdown at them so that you can keepyour maximum attention on the roadwhile driving the vehicle.

CAUTIONFor the purposes of safe driving, adjustthe audio volume to a level that allowsyou to hear sounds outside of thevehicle.

NOTE

l Do not use the audio for long periodsof time while the engine is off.Otherwise the battery could go dead.

l If a cellular phone or CB radio isused in or near the vehicle, it couldcause noise to occur from the audiosystem, however, this does notindicate that the system has beendamaged.

6-16

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (199,1)

qRadio Reception

AM characteristics

AM signals bend around such things asbuildings or mountains and bounce off theionosphere. Therefore, they can reachlonger distances than FM signals. Becauseof this, two stations may sometimes bepicked up on the same frequency at thesame time.

Station 2Station 1

Ionosphere

FM characteristics

An FM broadcast range is usually about40―50 km (25―30 miles) from thesource. Because of extra coding needed tobreak the sound into two channels, stereoFM has even less range than monaural(non-stereo) FM.

FM Station

40—50km(25—30 miles)

Signals from an FM transmitter are similarto beams of light because they do notbend around corners, but they do reflect.Unlike AM signals, FM signals cannottravel beyond the horizon. Therefore, FMstations cannot be received at the greatdistances possible with AM reception.

AM waveFM wave

FM wave

100—200 km (60—120 miles)

Ionosphere

Atmospheric conditions can also affectFM reception. High humidity will causepoor reception. However, cloudy daysmay provide better reception than cleardays.

Multipath noise

Since FM signals can be reflected byobstructions, it is possible to receive boththe direct signal and the reflected signal atthe same time. This causes a slight delayin reception and may be heard as a brokensound or a distortion. This problem mayalso be encountered when in closeproximity to the transmitter.

Reflected waveDirect

Interior Comfort

Audio System

6-17


Form No.8W89-EA-06K

Black plate (200,1)

Flutter/Skip noise

Signals from an FM transmitter move instraight lines and become weak in valleysbetween tall buildings, mountains, andother obstacles. When a vehicle passesthrough such an area, the receptionconditions may change suddenly, resultingin annoying noise.

Weak signal noise

In suburban areas, broadcast signalsbecome weak because of distance fromthe transmitter. Reception in such fringeareas is characterized by sound breakup.

Strong signal noise

This occurs very close to a transmittertower. The broadcast signals areextremely strong, so the result is noise andsound breakup at the radio receiver.

Station drift noise

When a vehicle reaches the area of twostrong stations broadcasting at similarfrequencies, the original station may betemporarily lost and the second stationpicked up. At this time there will be somenoise from this disturbance.

Station 2 88.3 MHz

Station 1 88.1 MHz

6-18

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (201,1)

qOperating Tips for Cassette TapePlayer

Cleaning the cassette tape player

The tape head, capstans, and pinch rollerswill gather oxide residue from cassettetapes. This can cause weak or waveringsounds and damage to the cassette tapesand player. Use a good quality head-cleaning tape or a liquid cleaner cassettetape to remove it.Should the unit not operate normally,consult an Authorized Mazda Dealer.Never attempt to repair it or insert ascrewdriver or anything else.

Handling the cassette tape player

The following precautions should beobserved.

l Do not spill any liquid on the audiosystem.

l Do not insert any objects, other thancassette tape, into the slot.

l If the cassette tape is loose, it mayproduce poor sound or performanceduring playback. Use a pencil orsomething similar to remove any slack.

l Only cassette tapes that play no longerthan 90 minutes should be used.Cassette tape exceeding 90 minutes arethin and may easily break.

l Do not leave a cassette tape in the tapeplayer slot when not in use. Remove itcompletely to permit the slot door toclose and to protect the mechanismfrom dust.

l Store cassette tapes away from extremeheat, magnetic fields, and directsunlight. Protect the exposed cassettetape from dirt and damage. Storecassette tapes in their original cases orother protective cases.

Interior Comfort

Audio System

6-19


Form No.8W89-EA-06K

Black plate (202,1)

qOperating Tips for CD Player/In-Dash CD Changer

Condensation phenomenon

Immediately after turning on the heaterwhen the vehicle is cold, the CD oroptical components (prism and lens) in theCD player/In-dash CD changer maybecome clouded with condensation. Atthis time, the CD will eject immediatelywhen placed in the unit. A clouded CDcan be corrected simply by wiping it witha soft cloth. Clouded optical componentswill clear naturally in about an hour. Waitfor normal operation to return beforeattempting to use the unit.

Handling the CD player/In-dash CDchanger

The following precautions should beobserved.

l Do not spill any liquid on the audiosystem.

l Do not insert any objects, other thanCDs, into the slot.

l The CD revolves at high speed withinthe unit. Defective (cracked or badlybent) CDs should never be used.

l Do not use non-conventional discssuch as heart-shaped, octagonal discs,etc. The disc may not eject resulting ina malfunction.

l If the memory portion of the CD istransparent or translucent, do not usethe disc.

Transparent

6-20

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (203,1)

l A new CD may have rough edges onits inner and outer perimeters. If a discwith rough edges is used, propersetting will not be possible and the CDplayer/In-dash CD changer will notplay the CD. In addition, the disc maynot eject resulting in a malfunction.Remove the rough edges in advance byusing a ball-point pen or pencil asshown below. To remove the roughedges, rub the side of the pen or pencilagainst the inner and outer perimeter ofthe CD.

l When driving over uneven surfaces,the sound may jump.

l The CD player/In-dash CD changer hasbeen designed to play CDs bearing theidentification logo as shown. No otherdiscs can be played.

l Use discs that have been legitimatelyproduced. If illegally-copied discs suchas pirated discs are used, the systemmay not operate properly.

CD Player

In-dash CD changer

l Be sure never to touch the signalsurface when handling the CDs. Pickup a CD by grasping the outer edge orthe edge of the hole and the outer edge.

l Do not stick paper or tape on the CD.Avoid scratching the reverse side (theside without a label). The disc may noteject resulting in a malfunction.

l Dust, finger smudges, and dirt candecrease the amount of light reflectedfrom the signal surface, thus affectingsound quality. If the CD shouldbecome soiled, gently wipe it with asoft cloth from the center of the CD tothe edge.

Interior Comfort

Audio System

6-21


Form No.8W89-EA-06K

Black plate (204,1)

l Do not use record sprays, antistaticagents, or household spray cleaners.Volatile chemicals such as benzine andthinner can also damage the surface ofthe CD and must not be used. Anythingthat can damage, warp, or fog plasticshould never be used to clean CDs.

l Insert discs one by one. If two discs areinserted at the same time, the systemmay not operate properly.

l CD TEXT textual information cannotbe displayed by audio units other thanthe In-dash CD changer (MP3 supporttype only). (Only playback is possible.)

l The following player can play MP3files recorded in CD-ROM, CD-R, andCD-RW.

· In-dash CD changer (MP3 filesupport type only)

l The CD player/In-dash CD changerejects the CD if the CD is insertedupside down. Also dirty and/ordefective CDs may be ejected.

l An 8 cm (3 in) CD cannot be played inthe CD player even if an 8 cm (3 in)CD adapter is used.The In-dash CD changer is speciallymade for 12 cm (5 in) CDs.An 8 cm (3 in) CD can be played in theIn-dash CD changer if an 8 cm (3 in)CD adapter is used.If an 8 cm (3 in) CD adapter is notused, the In-dash CD changer may bedamaged. Always use a CD adapter.

l Do not insert cleaning discs in the CDplayer/In-dash CD changer.

l Do not insert any disc with a peel-offseal affixed to it.

Handling the In-dash CD changer

l This unit may not be able to playcertain CD-R/CD-RWs made using acomputer or music CD recorder due todisc characteristics, scratches,smudges, dirt, etc., or due to dust orcondensation on the lens inside theunit.

l Storing CDs in the vehicle exposed todirect sunlight or high temperature maydamage the CD-R/CD-RWs, and makethem unplayable.

l CD-R/CD-RWexceeding 700 MBcannot be played.

l This unit may not be able to playcertain discs made using a computerdue to the application (writingsoftware) setting used. (For details,consult the store where the applicationwas purchased.)

l It is possible that certain text data, suchas titles, recorded on a CD-R/CD-RWmay not be displayed when musicaldata (CD-DA) is playing.

l The period from when a CD-RW isinserted to when it begins playing islonger than a normal CD or CD-R.

l Completely read the instruction manualand cautions for CD-R/CD-RWs.

l Do not use discs with cellophane tapeadhering, partially peeled off labels, oradhesive material exuding from theedges of the CD label. Also, do not usediscs with a commercially-availableCD-R label affixed. The disc may noteject resulting in a malfunction.

6-22

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (205,1)

qOperating tips for MP3

NOTE

Supply of this product only conveys alicense for private, non-commercial useand does not convey a license nor implyany right to use this product in anycommercial (i.e. revenue-generating)real time broadcasting (terrestrial,satellite, cable and/or any other media),broadcasting/streaming via the Internet,intranets and/or other networks or inother electronic content distributionsystems, such as pay-audio or audio-on-demand applications. An independentlicense for such use is required. Fordetails, please visit http://www.mp3licensing.com.

l This audio system handles MP3 filesthat have been recorded on CD-R/CD-RW/CD-ROMs. Discs that have beenrecorded using the following formatscan be played:

l ISO 9660 level 1l ISO 9660 level 2l Joliet extended formatl Romeo extended format

l This unit handles MP3 filesconforming to the MP3 formatcontaining both header frames and dataframes.

l This unit can play multi-sessionrecorded discs that have up to 99sessions.

l This unit can play MP3s with samplingfrequencies of 16/22.05/24/32/44.1/48kHz.

l This unit can play MP3 files that havebeen recorded in bit rates of 8 kbps to320 kbps. Nonetheless, to insureenjoyment of music with consistentsound quality, it is recommended to usediscs that have been recorded at a bitrate of 128 kbps or more.

l If a disc has both music data (CD-DA)and MP3 files, playback of the two filetypes differs depending on how thedisc was recorded.

l Packet written discs cannot be playedon this unit.

l This unit does not play CDs recordedusing MP3i (MP3 interactive), MP3PRO and RIFF MP3 formats.

Interior Comfort

Audio System

6-23


Form No.8W89-EA-06K

Black plate (206,1)

About folders and files

l The order of hierarchy for MP3 filesand folders during playback or otherfunctions is from shallow to deep. Thearrangement and playing order of arecorded disc containing MP3 files isas follows:

l File numberA numerical file number is assignedto each file in a folder in the order ofhierarchy from shallow to deep.

l Folder numberA numerical folder number isassigned to each folder in the orderof hierarchy from shallow to deep.

05

06

0102

04

03

1

5

4

2

3

Folder No.

Level1 Level2 Level3 Level4

l The folder order is automaticallyassigned and this order cannot beoptionally set.

l Any folder without an MP3 file will beignored. (It will be skipped and thefolder number will not be displayed.)

l MP3 files not conforming to the MP3format containing both header framesand data frames will be skipped andnot played.

l This unit will play MP3 files that haveup to eight levels. However, the morelevels a disc has, the longer it will taketo initially start playing. It isrecommended to record discs with twolevels or less.

l A single disc with up to 999 files canbe played and a single folder with up to255 files can be played.

l When naming an MP3 file, be sure toadd an MP3 file extension (.mp3) afterthe file name.

l The maximum number of charactersthat can be used for file names is asfollows. However, this unit will onlydisplay up to 30 characters, includingthe file extension (.mp3).

Maximum number ofcharacters in a file name(including a separator “.”and the three letters of the

file extension)

ISO9660 level 1 12*

ISO9660 level 2 31*

Joliet extendedformat

64

Romeo extendedformat

128

* English one-byte characters (capitalized only) andunderbar “_” are available.

6-24

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (207,1)

CAUTIONThis unit can only play MP3 files thathave an MP3 file extension (.mp3)attached. Do not attach an MP3 fileextension to any other type file as itcould cause noise to be emitted or amalfunction in the unit.

About ID3 Tag display

l This unit can only display ID3 Tagalbum, track and artist names that havebeen input using Ver1.0/1.1/2.2/2.3formats. Any other data that may havebeen input cannot be displayed.

l This unit can only display English(including numerals) one-bytecharacters. Use only English (includingnumerals) one-byte characters wheninputting ID3 tags. Two-byte charactersand some special symbols cannot bedisplayed.

Specialized glossary

MP3

Abbreviation for “MPEG Audio Layer 3”.A technical standard for audiocompression as decided by an ISO(International Organization forStandardization) MPEG working group.Use of MP3 allows for audio data to becompressed to approximately a tenth ofthe source data size.

ISO 9660

An international standard for logicalformatting of CD-ROM files and folders.It is divided into three separate levelsbased on differences in file namingprocedures, data configuration and othercharacteristics.

Multi-session

A session is the complete amount of datarecorded from the beginning to the end ofa single period of CD-ROM, CD-R/CD-RW data recording. Multi-session refers tothe existence of data from two or moresessions on a single disc.

Sampling

Refers to the process of encoding analogaudio data at regular intervals andconverting it to digital data. The samplingrate refers to the number of times asample is taken in one second and isexpressed in Hz units. Increasing thesampling rate improves the sound qualitybut also increases the data size.

Bit rate

Refers to the volume of data per second,expressed in bps (bits per second).Generally, the larger the number of thetransfer bit rate when compressing anMP3 file, the more information regardingmusical reproduction it carries, andtherefore the better the sound quality.

Packet writing

A general term for the method, similar tothat used for floppy discs or hard drives,of recording the required file in a singleincrement on a CD-R and similar.

ID3 Tag

ID3 tag is a method for storinginformation related to the music in anMP3 file. Information such as track, artistand album name can be stored. Thiscontent can be freely edited using ID3editing function software.

Interior Comfort

Audio System

6-25


Form No.8W89-EA-06K

Black plate (208,1)

VBR

Abbreviation for Variable Bit Rate. WhileCBR (Constant Bit Rate) is generallyused, VBR varies the bit rate for audiocompression according to compressionconditions and this allows forcompression with preference given tosound quality.

6-26

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (209,1)

Audio Set

Illustration is of a representative audio unit.

Cassette Tape Player

CD Player In-Dash CD Changer (Music CD Player)

In-Dash CD Changer (Music CD/MP3 CD Player)

Power/Volume/Sound Controls .............................................................................. page 6-28Operating the Radio ............................................................................................... page 6-30Operating the Cassette Tape Player ........................................................................ page 6-34Operating the Compact Disc (CD) Player .............................................................. page 6-36Operating the In-Dash CD Changer ....................................................................... page 6-38Error Indications ..................................................................................................... page 6-44

Interior Comfort

Audio System

6-27


Form No.8W89-EA-06K

Black plate (210,1)

qPower/Volume/Sound Controls

Power/Volume dial Audio control dial

Power ON/OFF

Turn the ignition switch to the ACC orON position.

Press the power/volume dial to turn theaudio system on.Press the power/volume dial again to turnthe audio system off.

NOTE

To prevent the battery from beingdischarged, do not leave the audiosystem on for a long period of timewhen the engine is not running.

Volume adjustment

To adjust the volume, turn the power/volume dial.

Turn the power/volume dial to the right toincrease volume, to the left to decrease it.

Audio sound adjustment

1. Press the audio control dial to select thefunction. The selected function will beindicated.

* Depending on the mode selected, the indication changes.

*

*

6-28

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (211,1)

2. Turn the audio control dial to adjust theselected functions as follows:

Indication Turn Left Turn Right

Select mode

Decreasebass

Increasebass

Decreasetreble

Increasetreble

Shift thesound to the

front


rear


left


right

OFF ON

NOTE

About 5 seconds after selecting anymode, the volume function will beautomatically selected. To reset bass,treble, fade, and balance, press theaudio control dial for 2 seconds. Theunit will beep and “CLEAR” will bedisplayed.

Automatic Level Control (ALC)

The automatic level control is a featurethat automatically adjusts audio volumeand sound quality according to the vehiclespeed.The volume increases in accordance withthe increase in vehicle speed, anddecreases as vehicle speed decreases.

The following four modes are available.Select the desired mode.

Mode Volume change

No change

Minimum

Medium

Maximum

Turn the audio control dial to select theALC OFF, ALC LEVEL1―3 mode. Theselected mode will be indicated.

BEEP setting

The beep-sound when operating the audiosystem can be set on or off.

Interior Comfort

Audio System

6-29


Form No.8W89-EA-06K

Black plate (212,1)

qOperating the Radio

Seek tuning button

Scan button

Channel preset buttons Manual tuning dial

Band selector buttons

Auto memory button/Electric serial number button

Satellite button

Radio ON

Press a band selector button ( , )to turn the radio on.

Band selection

Choose AM by pressing the AM button( ) and FM by pressing the FM1/2button ( ).

The selected mode will be indicated. IfFM stereo is being received, “ST” will bedisplayed.

NOTE

If the FM broadcast signal becomesweak, reception automatically changesfrom STEREO to MONO for reducednoise, and the “ST” indicator will goout.

Tuning

The radio has the following tuningmethods: Manual, Seek, Scan, Presetchannel, and Auto memory tuning. Theeasiest way to tune stations is to set themon preset channels.

NOTE

If the power supply is interrupted (fuseblows or the battery is disconnected),the preset channels will be canceled.

Manual tuning

Turning the manual tuning dial willchange the frequency higher or lower.

6-30

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (213,1)

Seek tuning

Pressing the seek tuning button ( , )will cause the tuner to seek a higher orlower frequency automatically.

NOTE

If you continue to press and hold thebutton, the frequency will continuechanging without stopping.

Scan tuning

Press the scan button ( ) toautomatically sample strong stations.Scanning stops at each station for about 5seconds. To hold a station, press the scanbutton ( ) again during this interval.

Preset channel tuning

The 6 preset channels can be used to store6 AM and 12 FM stations.

1. To set a channel first select AM, FM1,or FM2. Tune to the desired station.

2. Depress a channel preset button forabout 2 seconds until a beep sound isheard. The preset channel number andstation frequency will be displayed.The station is now held in the memory.

3. Repeat this operation for the otherstations and bands you want to store.To tune one in the memory, select AM,FM1, or FM2 and then press itschannel preset button. The stationfrequency and the channel number willbe displayed.

NOTE

If the power supply is interrupted (fuseblows or the battery is disconnected),the preset channels will be canceled.

Auto memory tuning

This is especially useful when driving inan area where the local stations are notknown. Additional AM/FM stations canbe stored without disturbing thepreviously set channels.

Press and hold the auto memory button( ) for about 2 seconds until a beepsound is heard; the system willautomatically scan and temporarily storeup to 6 stations with the strongestfrequencies in each selected band in thatarea.

After scanning is completed, the stationwith the strongest frequency will be tunedand its frequency displayed.Press and release the auto memory button( ) to recall stations from the auto-stored stations. One stored station will beselected each time; its frequency andchannel number will be displayed.

NOTE

If no stations can be tuned afterscanning operations, “A” will bedisplayed.

Interior Comfort

Audio System

6-31


Form No.8W89-EA-06K

Black plate (214,1)

SATELLITE RADIO (SAT)

Vehicles equipped with the separatelypurchased SIRIUS digital satellite radiounit have the ability to receive up to 100channels of digital quality programmingcoast to coast via satellite. For informationon use, read the Satellite Radio Kitmanual accompanying the SIRIUS digitalsatellite radio unit. A subscription toSIRIUS digital satellite radio service isrequired (available in the U.S. - ExceptAlaska and Hawaii) to enable this featureonce the separately purchased SIRIUSdigital satellite radio unit has beeninstalled. For subscription information ordigital satellite radio technical issuescontact SIRIUS directly at:

- Web: www.siriusradio.com- Phone (24 hrs/day, 7 days/week): 888-539-SIRI (7474)- E-mail: [email protected] Mailing Address: Sirius Satellite Radio1221 Avenue Of The AmericasNew York, NY 10020Attention: Customer Care

Include your Sirius Radio ESN(Electronic Serial Number) whensubscribing or requesting technicalassistance. See the Satellite Radio Kitmanual accompanying the SIRIUS unitfor complete satellite radio activationprocedures and information on how todisplay the ESN#.

6-32

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (215,1)

MEMO

6-33


Form No.8W89-EA-06K

Black plate (216,1)

qOperating the Cassette Tape Playerí

(one being played)

APC button: (next program)

Rewind button

Repeat button

Dolby NR button Program button

Cassette tape eject button

Fast-forward button

Cassette tape play button

Cassette tape insert

Insert the cassette tape into the slot, openedge to the right and cassette tape willbegin play, and “TAPE PLAY” will bedisplayed. At the end of the cassette tape,the unit automatically reverses cassettetape play. When is lit, the cassettetape's top side is playing. When is lit,the bottom side is on.

Playing

Press the cassette tape play button( ) to start play when a cassette tapeis in the unit. If there isn't a cassette tapein the unit when the cassette tape playbutton ( ) is pressed, “NO TAPE”will flash on and off.

Dolby noise reduction

When using a tape with Dolby NR*, pushthe Dolby NR button ( ). Thesymbol will be displayed. To play a tapewithout Dolby NR, push the button onceagain.

* Noise reduction system manufacturedunder license from Dolby LaboratoriesLicensing Corporation.Dolby and the double-D symbolare trademarks of Dolby LaboratoriesLicensing Corporation.

Ejecting the cassette tape

Press the cassette tape eject button ( ) toeject the cassette tape.

6-34

Interior Comfort

íSome models.

Audio System


Form No.8W89-EA-06K

Black plate (217,1)

NOTE

The cassette tape can be ejected whenthe ignition switch is in the OFFposition.

Fast-forward/Rewind

Press the fast-forward button ( ) tofast-forward.Press the rewind button ( ) to rewind.To stop this operation and play thecassette tape, press the button again.

NOTE

When the cassette tape ends during fast-forward or rewind, it automaticallystops and starts playing.

Reversing

Press the program button ( ) tochange cassette tape-play direction.

NOTE

When the cassette tape ends, the unitautomatically reverses play.

Automatic program control (APC)

APC is used to find the beginning ofeither the next program or the one beingplayed.

Press the APC button ( ) to thebeginning of the next selection.Press the APC button ( ) to thebeginning of the one being played. Tostop this operation and play the cassettetape, press the button again.

NOTE

APC may not operate properly if:

l A tape was recorded at a low level.

l A tape has long, silent intervals.

l A tape is a live recording.

l A tape has very short intervals ofless than 3 seconds.

Repeat play

This operation makes it possible to listento a selection repeatedly.

Press the repeat button ( ) during play.The current selection playing will berepeated (“RPT” will be displayed).Press the repeat button ( ) once againto cancel repeat play.

NOTE

RPT may not operate properly if:

l A tape was recorded at a low level.

l A tape has long, silent intervals.

l A tape is a live recording.

l A tape has very short intervals ofless than 3 seconds.

Interior Comfort

Audio System

6-35


Form No.8W89-EA-06K

Black plate (218,1)

qOperating the Compact Disc (CD) Playerí

Scanbutton

Track down button

Track up button

Reverse button

Repeat button

Random button

Fast-forward button

CD play buttonCD slot CD eject buttonLoad button

Inserting the CD

Insert the CD into the slot, label-side up.The auto-loading mechanism will set theCD and begin play. There will be a shortlapse before play begins while the playerreads the digital signals on the CD.

Playing

Press the CD play button ( ) to startplay when a CD is in the unit.If there isn't a CD in the unit when the CDplay button ( ) is pressed, “NO DISC”will flash on and off.

NOTE

When the load button ( ) is pressed,the CD will load and play even if theCD eject button ( ) had beenpreviously pressed.

Ejecting the CD

Press the CD eject button ( ) to eject theCD.

Fast-forward/Reverse

Press and hold the fast-forward button( ) to advance through a track at highspeed.Press and hold the reverse button ( )to reverse through a track at high speed.

Track search

Press the track up button ( ) once toskip forward to the beginning of the nexttrack.Press the track down button ( ) once toskip back to the beginning of the currenttrack.

6-36

Interior Comfort

íSome models.

Audio System


Form No.8W89-EA-06K

Black plate (219,1)

Music scan

This feature helps to find a program byplaying about the first 10 seconds of eachtrack.

Press the scan button ( , ) duringplay to start scan play operation (the tracknumber will flash).Press the scan button ( , ) once againto cancel scan play.

NOTE

If the unit is left in scan, normal playwill resume where scan was selected.

Repeat play

This feature makes it possible to listen toa selection repeatedly.

Press the repeat button ( ) during play.The current selection will be repeated(“RPT” will be displayed).Press the repeat button ( ) once againto cancel repeat play.

Random play

This feature allows the CD player torandomly select the order of the songs.

Press the random button ( ) duringplay. The next selection will be randomlyselected (“RDM” will be displayed).Press the random button ( ) onceagain to cancel random play.

Interior Comfort

Audio System

6-37


Form No.8W89-EA-06K

Black plate (220,1)

qOperating the In-Dash CD Changerí

Fast-forward button

Disc down button

Track down button

Track up button

Scanbutton

Channel preset buttons

CD eject button

CD slotLoad button

Reverse button

Disc up button Random button

Repeat button

CD play button

(Music CD player)

(Music CD/MP3 CD player)

There are two types of In-dash CDchangers. Check which In-dash CDchanger type you own.

Type Playable data

Music CD player · Music data (CD-DA)

Music CD/MP3 CDplayer

· Music data (CD-DA)

· MP3 file

NOTE

If a disc has both music data (CD-DA)and MP3 files, playback of the two filetypes differs depending on how the discwas recorded.

Inserting the CD

The CD must be label-side up wheninserting. The auto-loading mechanismwill set the CD and begin play. There willbe a short lapse before play begins whilethe player reads the digital signals on theCD.The disc number and the track numberwill be displayed.

6-38

Interior Comfort

íSome models.

Audio System


Form No.8W89-EA-06K

Black plate (221,1)

NOTE

The CD will begin playbackautomatically after insertion.A CD cannot be inserted while thedisplay reads “WAIT”. A beepingsound can be heard during this waitingtime. Simultaneously pressing thepower/volume dial and the load button( ) for about 2 seconds will turnthis beeping sound ON or OFF.

Normal insertion

1. Press the load button ( ).

2. When “IN” is displayed, insert the CD.

Inserting CDs into desired tray number

1. Press and hold the load button ( )for about 2 seconds until a beep soundis heard.

2. Press the channel preset button for thedesired tray number while “WAIT” isdisplayed.


NOTE

The CD cannot be inserted to thedesired tray number if the number isalready occupied.

Multiple insertion

1. Press and hold the load button ( )for about 2 seconds until a beep soundis heard.


3. When “IN” is displayed again, insertthe next CD.

NOTE

The first-inserted CD will be playedautomatically when:

l No other CD is inserted within 15seconds after “IN” is displayed.

l The CD trays are full.

Ejecting the CD

Normal ejection

1. Press the CD eject button ( ). Thedisc number and “DISC OUT” will bedisplayed.

2. Pull out the CD.

NOTE

l When the CD is ejected during play,the next CD will be playedautomatically.

l (Music CD player)If the CD is not removed from theslot within approximately 10 secondsafter ejection, it will be re- insertedautomatically.

Ejecting CDs from desired tray number

1. Press and hold the CD eject button ( )for about 2 seconds until a beep soundis heard.The “DISC OUT” display flashes.

2. Press the channel preset button for thedesired CD number for less than 5seconds after the beep sound is heard.

3. Pull out the CD.

Interior Comfort

Audio System

6-39


Form No.8W89-EA-06K

Black plate (222,1)

NOTE

(Music CD player)If the CD is not removed from the slotwithin approximately 10 seconds afterejection, it will be re- insertedautomatically.

Multiple ejection

1. Press and hold the CD eject button ( )for about 2 seconds until a beep soundis heard.The “DISC OUT” display flashes.

2. Press the CD eject button ( ) againfor less than 5 seconds after the beepsound is heard.

NOTE

If the button is not pressed and about 5seconds have elapsed while“DISC OUT” is flashing, CDs areautomatically ejected.

3. Pull out the CD, then the next CD willbe ejected.

NOTE

l CDs will be ejected starting with theone with the lowest number.

l All CDs in the tray will be ejectedcontinuously.

l CDs can be ejected when the ignitionswitch is off. Press and hold the CDeject button ( ) for about 2 secondsand all CDs will eject.

l (Music CD player)If the CD is not removed from theslot within approximately 10 secondsafter ejection, it will be re- insertedautomatically.

Playing

Press the CD play button ( ) to startplay when a CD is in the unit.If there isn't a CD in the unit when the CDplay button ( ) is pressed, “NO DISC”will flash on and off.

Fast-forward/Reverse

Press and hold the fast-forward button( ) to advance through a track at highspeed.Press and hold the reverse button ( )to reverse through a track at high speed.

Track search

Press the track up button ( ) once toskip forward to the beginning of the nexttrack.Press the track down button ( ) once toskip back to the beginning of the currenttrack.

Disc search

During music CD playback

To change the disc, press the DISC button( or ) during playback.

6-40

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (223,1)

During MP3 CD playback

To change the disc, press the DISC button( or ) for 1.5 seconds ormore during playback.

Folder search (during MP3 CDplayback)

To change to the previous folder, press thefolder down button ( ) for less than1.5 seconds, or press the folder up button( ) for less than 1.5 seconds toadvance to the next folder.

Music scan

This feature helps to find a program byplaying about the first 10 seconds of eachtrack.

Press the scan button ( , ) duringplay to start scan play operation (the tracknumber will flash).Press the scan button ( , ) once againto cancel scan play.

NOTE

If the unit is left in scan, normal playwill resume where scan was selected.

Repeat play


1. Press the repeat button ( ) duringplayback to play the current trackrepeatedly. “RPT” is displayed.

2. Press the button again to cancel therepeat play.


(Track repeat)

1. Press the repeat button ( ) duringplayback to play the current trackrepeatedly. “RPT” is displayed.

2. To cancel the repeat play, press thebutton again after 3 seconds.

(Folder repeat)

1. Press the repeat button ( ) duringplayback, and then press the buttonagain within 3 seconds to play thetracks in the current folder repeatedly.“RPT” is displayed.

2. Press the button again to cancel therepeat play.

Random play

Tracks are randomly selected and played.


1. Press the random button ( ) duringplayback to play the tracks in the CDrandomly. “RDM” is displayed.

2. Press the button again to cancel therandom play.


(Folder random)

1. Press the random button ( ) duringplayback to play the tracks in the folderrandomly. “RDM” is displayed.

2. To cancel the random play, press thebutton again after 3 seconds.

Interior Comfort

Audio System

6-41


Form No.8W89-EA-06K

Black plate (224,1)

(CD random)

1. Press the random button ( ) duringplayback, and then press the buttonagain within 3 seconds to play thetracks in the CD randomly. “RDM” isdisplayed.

2. Press the button again to cancel therandom play.

Switching the display (Music CD/MP3CD player)

Each time the display button ( ) ispressed during playback, the display willswitch in the following order.Music CD

Track number/Elapsed time display

Disc tray number

File name display

Album name display

Artist name display

MP3 CD

Disc number/File number/Elapsed time

Folder number/Track number

Disc tray number

Track name

Folder name

Album name (ID3 Tag)

Song name (ID3 Tag)

Artist name (ID3 Tag)

NOTE

(MP3 CD)

l “NO TITLE” will be displayed whenthe display is switched for a filewithout a file, track or other nameinput.

l This unit can only read English(including numerals) one-bytecharacters. If any other character isincluded, “NO TITLE” will bedisplayed. Depending on the CDwriting software used, proper displaymay not be possible.

6-42

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (225,1)

Display scroll (Music CD/MP3 CDplayer)

Only 12 characters can be displayed atone time. To display the rest of thecharacters of a long title, turn the displayfeed dial ( ) to the right. Hiddentitles can be scrolled into the display onecharacter at a time.

NOTE

The displayable number of characters islimited. If the number of characters,including the file extension (.mp3),exceeds 32 characters, it may not befully displayed.

Message display

If “CHECK CD” is displayed, it meansthat there is some CD malfunction. Checkfor damage, dirt, or smudges on the CD,and then properly reinsert. If the messageappears again, take the unit to anAuthorized Mazda Dealer for service.

Interior Comfort

Audio System

6-43


Form No.8W89-EA-06K

Black plate (226,1)

qError Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clearthe error indication, take the vehicle to an Authorized Mazda Dealer.

Indication Cause Solution

CHECK CD

CD is inserted upside downInsert the CD properly. If the error indicationdoes not disappear, consult an Authorized MazdaDealer

CD is defectiveInsert another CD properly. If the error indicationdoes not disappear, consult an Authorized MazdaDealer

6-44

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (227,1)

Audio Control SwitchOperation (Steering Wheel)í

When the audio unit is turned on,operation of the audio unit from thesteering wheel is possible.

NOTE

Because the audio unit will be turnedoff under the following conditions, theswitches will be inoperable.

l When the ignition switch is turned tothe LOCK position.

l When the power button on the audiounit is pressed and the audio unit isturned off.

l When all CDs are ejected.

Without navigation system

With navigation systemUse the VOICE button for navigationsystem sound operation.For details, refer to“NAVIGATION SYSTEM”.

VOICE button

NOTE

l The VOICE button is operable withthe audio unit turned off.

l Mazda has installed this system toprevent distraction while driving thevehicle and using audio controls onthe dashboard.Always make safe driving your firstpriority.

Interior Comfort

Audio System

6-45íSome models.


Form No.8W89-EA-06K

Black plate (228,1)

qAdjusting the Volume

To increase the volume, press the volumebutton ( ).

To decrease the volume, press the volumebutton ( ).

qChanging the Source

Press the mode switch ( ) to changethe audio source (FM1 radio> FM2 radio>AM radio> CD player or CD changer>Cassette tape player> SIRIUS1>SIRIUS2> SIRIUS3> cyclical).

NOTE

Cassette tape, CD, CD changer, andSIRIUS digital satellite radio modescannot be selected in the followingcases:

l A cassette deck, CD, CD changer, orSIRIUS digital satellite radio unit isnot equipped on the audio system.

l A cassette tape, or CD has not beeninserted.

qSeek Switch

When listening to the radio

Press the seek switch ( , ), the radioswitches to the next/previous storedstation in the order that it was stored(1―6).

Press the seek switch ( , ) for about 2seconds until a beep sound is heard toseek all usable stations at a higher orlower frequency whether programmed ornot.

When playing a cassette tape

Press the seek switch ( ), release, and itwill advance to the next selection.Press the seek switch ( ), release, and itwill repeat the selection being played.

6-46

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (229,1)

When playing a CD

Press the seek switch ( ) to skip to thenext track.Press the seek switch ( ) to repeat thecurrent track.

qMute Switch

Press the mute switch ( ) once to muteaudio, press it again to resume audiooutput.

NOTE

If the ignition switch is turned to theLOCK position with the audio muted,the mute will be canceled.Therefore, when the engine is restarted,the audio is not muted. To mute theaudio again, press the mute switch ( ).

Interior Comfort

Audio System

6-47


Form No.8W89-EA-06K

Black plate (230,1)

Safety CertificationThis CD player is made and tested to meet exacting safety standards. It meets FCCrequirements and complies with safety performance standards of the U.S. Department ofHealth and Human Services.

CAUTIONl This CD player should not be adjusted or repaired by anyone except qualified servicepersonnel.If servicing is required, contact an Authorized Mazda Dealer.

l Use of controls or adjustments or performance of procedures other than thosespecified herein may result in hazardous laser exposure. Never operate the CD playerwith the top case of the unit removed.

l Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment.

NOTE

For CD player section:This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may causeundesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation.

6-48

Interior Comfort

Audio System


Form No.8W89-EA-06K

Black plate (231,1)

SunvisorsWhen you need a sunvisor, lower it foruse in front or swing it to the side.

Sunvisor

qVanity Mirrors

To use the vanity mirror, lower thesunvisor.The vanity mirror light will illuminatewhen you open the cover.

Interior Lights

qIlluminated Entry System

When the illuminated entry systemoperates, the overhead light (switch is inthe DOOR position) and the courtesylights turn on for:

l About 30 seconds after the driver'sdoor is unlocked and the ignitionswitch is in the LOCK position (withthe ignition key removed).

l About 15 seconds after all doors areclosed.

l About 15 seconds after the ignitionswitch is in the LOCK position (withthe ignition key removed) with alldoors closed.

The light also turns off when:

l The ignition switch is turned to the ONposition and all doors are closed.

l The driver's door is locked.

NOTE

Battery saverIf any door is left opened, the light goesout after about 30 minutes to save thebattery.The light turns on again when theignition switch is turned to the ONposition, or when any door is openedafter all doors have been closed.

Interior Comfort

Interior Equipment

6-49


Form No.8W89-EA-06K

Black plate (232,1)

qOverhead Lights

Front

SwitchPosition

Front Overhead Lights

Light off

l Light on when any door is open

l Light on or off when theilluminated entry system is on

Rear

SwitchPosition

Rear Overhead Lights

Light off

l Light on when any door is open

l Light on or off when theilluminated entry system is on

qMap Lights

The map lights are switched on or off bypressing the switches.

Front

Rear

6-50

Interior Comfort

Interior Equipment


Form No.8W89-EA-06K

Black plate (233,1)

qLuggage Compartment Light

5-Door

SwitchPosition

Luggage Compartment Light

Light off

Light on when the hatch is open

Sport Wagon

SwitchPosition

Luggage Compartment Light

Light off

Light on when the liftgate is open

qCourtesy Lights

Turns on when any door is open or theilluminated entry system is on.

Courtesy light

Interior Comfort

Interior Equipment

6-51


Form No.8W89-EA-06K

Black plate (234,1)

Information Display

OPEN/CLOSE switch (with navigation system)

AMB switch (with outside temperature display )

TILT switch (with navigation system)

CLOCK/CLK switch SET switch

qInformation Display Functions

The information display has the following functions:

l Clock

l Ambient Temperature Display (Outside Temperature Display)

l Climate Control Display

l Audio Display

6-52

Interior Comfort

Interior Equipment


Form No.8W89-EA-06K

Black plate (235,1)

qClock

When the ignition switch is in the ACC orON position, the time is displayed.

Time setting

1. Press the CLOCK/CLK switch until abeep sounds, and “12Hr” and “24Hr”will be displayed.

2. Press the SET switch to switch between“12Hr” and “24Hr” displays. Theselected display will flash.To select the desired clock setting,press the CLOCK/CLK switch againwhile the preferred setting is flashing.

3. “Hr. ADJUST” will be displayed next,and the hour portion of the display willflash. Press the SET switch to set thehour, then press the CLOCK/CLKswitch.

4. “Min. ADJUST” will be displayednext, and the minutes portion of thedisplay will flash. Press the SET switchto set the minutes, then press theCLOCK/CLK switch.

Time resetting

While the clock is displayed, press theSET switch 1.5 seconds or more. Whenthe switch is released, a beep will soundand the clock will be reset as follows:(Example)12:01―12:29→12:0012:30―12:59→1:00

NOTE

When the SET switch is released, theseconds are reset to “00”.

qAmbient Temperature Display

When the ignition switch is in the ONposition, press the AMB switch to displaythe ambient temperature.

Interior Comfort

Interior Equipment

6-53


Form No.8W89-EA-06K

Black plate (236,1)

NOTE

l Under the following conditions, theambient temperature display maydiffer from the actual ambienttemperature depending on thesurroundings and vehicle conditions:

l Significantly cold or hottemperatures.

l Sudden changes in ambienttemperature.

l The vehicle is parked.l The vehicle is driven at low

speeds.

l Press the AMB switch 2 seconds ormore to switch the display fromFahrenheit to Centigrade or viceversa.

l (With fully automatic climatecontrol system)Press the AMB switch again toswitch the display from ambienttemperature to the temperature setfor the air conditioner.

qClimate Control Display

The climate control system status isdisplayed. To operate the climate controlsystem, refer to “Climate Control System”(page 6-2).

qAudio Display

The audio system status is displayed. Tooperate the audio system, refer to“Audio System” (page 6-16).

Cup Holder

WARNINGNever use a cup holder to hold hotliquids while the vehicle is moving:Using a cup holder to hold hot liquidswhile the vehicle is moving isdangerous. If the contents spill, youcould be scalded.

Do not put anything other than cupsor drink cans in cup holders:Putting objects other than cups ordrink cans in a cup holder isdangerous.During sudden braking ormaneuvering, occupants could be hitand injured, or objects could bethrown around the vehicle, causinginterference with the driver and thepossibility of an accident. Only use acup holder for cups or drink cans.

CAUTIONTo reduce the possibility of injury in anaccident or a sudden stop, keep cupholders closed when not in use.

6-54

Interior Comfort

Interior Equipment


Form No.8W89-EA-06K

Black plate (237,1)

qFront

To use the cup holder, open the centerconsole by pressing the lower center partof its cover.

qRear

The rear cup holder is on the rear centerarmrest.

Bottle HolderBottle holders are on the inside of thefront doors.

Bottle holder

CAUTIONDo not use the bottle holders forcontainers without caps. The contentsmay spill when the door is opened orclosed.

Interior Comfort

Interior Equipment

6-55


Form No.8W89-EA-06K

Black plate (238,1)

Storage Compartments

WARNINGKeep storage boxes closed whendriving:Driving with the storage boxes open isdangerous. To reduce the possibility ofinjury in an accident or a sudden stop,keep the storage boxes closed whendriving.

CAUTIONDo not leave lighters or eyeglasses inthe storage boxes while parked underthe sun. A lighter could explode or theplastic material in eyeglasses coulddeform and crack from hightemperature.

qOverhead Console

This console box is designed to storeeyeglasses or other accessories.Push and release to open.

qStorage Pocket

To open, push the release catch down andpull the lid downward.

qCenter Box with Lid (WithoutNavigation System)

To use, pull the knob, and the lid opensautomatically.

Knob

6-56

Interior Comfort

Interior Equipment


Form No.8W89-EA-06K

Black plate (239,1)

qGlove Box

To open the glove box, pull the latchtoward you.Insert the key and turn it clockwise tolock, counterclockwise to unlock.

Unlock

Lock

qCenter Console

To open, pull the lower release latch.

Small items can be placed in the tray ofthe center console lid.To open it, pull the upper release latch.

qStorage Box (5-Door/Sport Wagon)

To open, turn the knobs and remove thecover.Luggage compartment, right side

Knob

Interior Comfort

Interior Equipment

6-57


Form No.8W89-EA-06K

Black plate (240,1)

Luggage compartment, left side

Knob

qCargo Securing Loops (5-Door/Sport Wagon)

WARNINGMake sure luggage and cargo issecured before driving:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury.

Use the loops in the luggage compartmentto secure cargo with a rope or net. Thetensile strength of the loops is 196 N (20kgf, 44 lbf). Do not apply excessive forceto the loops as it will damage them.

5-Door

Sport Wagon

6-58

Interior Comfort

Interior Equipment


Form No.8W89-EA-06K

Black plate (241,1)

qCargo Sub-Compartment (SportWagon)

To use the cargo sub-compartment,remove trunk board A and open trunkboard B.

Cargo sub-compartment

Trunk board A

Trunk board B

Accessory SocketsThe ignition switch must be in the ACCor ON position.Only use genuine Mazda accessories orthe equivalent requiring no greater than120 W (DC 12 V, 10 A).Front

Rear

Interior Comfort

Interior Equipment

6-59


Form No.8W89-EA-06K

Black plate (242,1)

CAUTIONTo prevent accessory socket damage orelectrical failure, pay attention to thefollowing:

l Don't use accessories that requiremore than 120 W (DC 12 V, 10 A).

l Don't use accessories that are notgenuine Mazda accessories or theequivalent.

l Close the cover when the accessorysocket is not in use to preventforeign objects and liquids fromgetting into the accessory socket.

l Correctly insert the plug into theaccessory socket.

NOTE

To prevent discharging the battery, don'tuse the socket for long periods with theengine off or idling.

6-60

Interior Comfort

Interior Equipment


Form No.8W89-EA-06K

Black plate (243,1)

7 In Case of an Emergency

Helpful information on what to do in an emergency.

Parking in an Emergency ............................................................. 7-2Parking in an Emergency .......................................................... 7-2

Flat Tire ......................................................................................... 7-3Spare Tire and Tool Storage ...................................................... 7-3Changing a Flat Tire ................................................................. 7-8

Overheating ................................................................................. 7-15Overheating ............................................................................. 7-15

Emergency Starting .................................................................... 7-17Starting a Flooded Engine ....................................................... 7-17Jump-Starting .......................................................................... 7-18Push-Starting ........................................................................... 7-20

Emergency Towing ..................................................................... 7-21Towing Description ................................................................. 7-21Recreational Towing ............................................................... 7-22

7-1


Form No.8W89-EA-06K

Black plate (244,1)

Parking in an EmergencyThe hazard warning lights should alwaysbe used when you stop on or near aroadway.

The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it.

Depress the hazard warning flasher and allfour turn signals will flash.

NOTE

l The turn signals don't work when thehazard warning lights are on.

l Check local regulations about the useof hazard warning lights while thevehicle is being towed. They mayforbid it.

7-2

In Case of an Emergency

Parking in an Emergency


Form No.8W89-EA-06K

Black plate (245,1)

Spare Tire and Tool StorageSpare tire and tools are stored in the locations illustrated in the diagram.

Sedan/5-door

Spare tire

Tire hold-down bolt (Gold)

Sport Wagon

Spare tire

Jack

Lug wrench

Lug wrench

Jack

With sub-woofer

Tire hold-down bolt (Gold)

With sub-woofer

5-doorSedan


Flat Tire

7-3


Form No.8W89-EA-06K

Black plate (246,1)

qJack

To remove the jack

(Sedan)

1. Remove the jack container lid.

2. Turn the wing bolt counterclockwise.

(5-Door/Sport Wagon)

1. Turn the knob and remove the cover.

2. Remove the jack container lid.

3. Turn the wing bolt counterclockwise.

To secure the jack

Perform the removal procedure in reverse.

7-4


Flat Tire


Form No.8W89-EA-06K

Black plate (247,1)

qSpare Tire

Your Mazda has a temporary spare tire.The temporary spare is lighter and smallerthan a conventional tire, and is designedonly for emergency use and should beused only for VERY short periods.Temporary spares should NEVER be usedfor long drives or extended periods.

WARNINGDo not install the temporary spare tireon the front wheels (driving wheels):Driving with the temporary spare tireon one of the front driving wheels isdangerous. Handling will be affected.You could lose control of the vehicle,especially on ice or snow bound roads,and have an accident. Move a regulartire to the front wheel and install thetemporary spare tire to the rear.

CAUTIONl When using the temporary spare tire,driving stability may decreasecompared to when using only theconventional tire. Drive carefully.

l To avoid damage to the temporaryspare or to the vehicle, observe thefollowing precautions:

l Don't exceed 80 km/h (50 mph).l Avoid driving over obstacles.

Also, don't drive through anautomatic car wash. This tire'sdiameter is smaller than aconventional tire, so the groundclearance is reduced about 35 mm(1.4 in).

l Do not use tire chains on any typeof tire, including the spare tire.

l Don't use your temporary spareon any other vehicle, it has beendesigned only for your Mazda.

l Use only one temporary spare tireon your vehicle at the same time.

To remove the spare tire

(Sedan)

1. Remove the trunk board.


Flat Tire

7-5


Form No.8W89-EA-06K

Black plate (248,1)

2. Turn the tire wing boltcounterclockwise.

(5-Door)

1. For vehicles equipped with a sub-woofer, uncouple the connector.

Connector

NOTE

Extra strength may be required touncouple the connector. Be sure tosqueeze the tab firmly.If uncoupling is very difficult, removethe wiring from the groove in the trunkboard. Then, pull the driver's side of thetrunk board up to remove the spare tire.

2. Remove the trunk board.

3. For vehicles equipped with a sub-woofer, loosen the wing bolt andremove the woofer and spare tire.

Lock washerWing bolt (Black)

Sub-woofer

For vehicles not equipped with a sub-woofer, loosen the hold-down bolt andremove the spare tire.

7-6


Flat Tire


Form No.8W89-EA-06K

Black plate (249,1)

(Sport Wagon)

1. Remove trunk board A and open trunkboard B.

Trunk board B

Trunk board A

2. For vehicles equipped with a cargosub-compartment, remove the cargosub-compartment.

3. For vehicles equipped with a sub-woofer, loosen the wing bolt andremove the woofer and spare tire.

Lock washerWing bolt (Black)

Sub-woofer

For vehicles not equipped with a sub-woofer, loosen the hold-down bolt andremove the spare tire.

NOTE

For vehicles equipped with a sub-woofer, put the sub-woofer on the leftside of the luggage compartment whenremoving the spare tire.

To secure the spare tire

Perform the removal procedure in reverse.


Flat Tire

7-7


Form No.8W89-EA-06K

Black plate (250,1)

Changing a Flat Tire

NOTE

If the following occurs while driving, itcould indicate a flat tire.

l Steering becomes difficult.

l The vehicle begins to vibrateexcessively.

l The vehicle pulls in one direction.

If you have a flat tire, drive slowly to alevel spot that is well off the road and outof the way of traffic to change the tire.Stopping in traffic or on the shoulder of abusy road is dangerous.

WARNINGBe sure to follow the directions forchanging a tire, and never get under avehicle that is supported only by ajack:Changing a tire is dangerous if notdone properly. The vehicle can slip offthe jack and seriously injure someone.

Never allow anyone inside a vehiclesupported by a jack:Allowing someone to remain in avehicle supported by a jack isdangerous. The occupant could causethe vehicle to fall resulting in seriousinjury.

NOTE

Make sure the jack is well lubricatedbefore using it.

1. Park on a level surface off the right-of-way and firmly set the parking brake.

2. Put a vehicle with an automatictransaxle in Park (P), a manualtransaxle in Reverse (R) or 1, and turnoff the engine.

3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicleand away from the vehicle and traffic.

5. Remove the jack, tool, and spare tire(page 7-3).

6. Block the wheel diagonally oppositethe flat tire. When blocking a wheel,place a tire block both in front andbehind the tire.

NOTE

When blocking a tire, use rocks orwood blocks of sufficient size to holdthe tire in place.

7-8


Flat Tire


Form No.8W89-EA-06K

Black plate (251,1)

qRemoving a Flat Tire

1. If your vehicle is equipped with awheel cover, pry off the wheel coverwith the beveled end of the lug wrench.

NOTE

Force the end of the lug wrench firmlybetween wheel and cover, or removalwill be difficult.

CAUTIONAlign the notch on the wheel coverwith the valve stem when installing it.

Notch

Tire valve

Damage could occur during installationif the wheel cover is not properlyaligned.

2. Loosen the lug nuts by turning themcounterclockwise one turn each, butdon't remove any lug nuts until the tirehas been raised off the ground.

3. Place the jack under the jackingposition closest to the tire beingchanged.

Jacking position


Flat Tire

7-9


Form No.8W89-EA-06K

Black plate (252,1)

WARNINGUse only the front and rear jackingpositions recommended in thismanual:Attempting to jack the vehicle inpositions other than thoserecommended in this manual isdangerous. The vehicle could slip offthe jack and seriously injure or evenkill someone. Use only the front andrear jacking positions recommendedin this manual.

Use only the jack provided with yourMazda:Using a jack that is not designed foryour Mazda is dangerous. The vehiclecould slip off the jack and seriouslyinjure someone.

Never place objects under the jack:Jacking the vehicle with an objectunder the jack is dangerous. The jackcould slip and someone could beseriously injured by the jack or thefalling vehicle.

4. Insert the lug wrench into the jack.

5. Turn the lug wrench clockwise andraise the vehicle high enough so thatthe spare tire can be installed. Beforeremoving the lug nuts, make sure yourMazda is firmly in position and that itcannot slip or move.

6. Remove the lug nuts by turning themcounterclockwise; then remove thewheel.

7-10


Flat Tire


Form No.8W89-EA-06K

Black plate (253,1)

qLocking Lug Nutsí

If your vehicle has optional antitheftwheel lug nuts, one on each wheel willlock the tires and you must use a specialkey to unlock them. This key is attachedto the lug wrench and is stored with thespare tire. Register them with the lockmanufacturer by filling out the cardprovided in the glove box and mailing itin the accompanying envelope. If you losethis key, consult an Authorized MazdaDealer or use the lock manufacturer'sorder form, which is with the registrationcard.

Special keyAntitheft lug nut

To remove an antitheft lug nut

1. Obtain the key for the antitheft lug nut.

2. Place the key on top of the nut, and besure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench.

3. Place the lug wrench on top of the keyand apply pressure. Turn the wrenchcounterclockwise.

To install the nut

1. Place the key on top of the nut, and besure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench.

2. Place the lug wrench on top of the key,apply pressure, and turn it clockwise.

qMounting the Spare Tire

1. Remove dirt and grime from themounting surfaces of the wheel andhub, including the hub bolts, with acloth.

WARNINGMake sure the mounting surfaces ofthe wheel, hub and lug nuts are cleanbefore changing or replacing tires:When changing or replacing a tire,not removing dirt and grime from themounting surfaces of the wheel, huband hub bolts is dangerous. The lugnuts could loosen while driving andcause the tire to come off, resulting inan accident.

2. Mount the spare tire.


Flat Tire

7-11íSome models.


Form No.8W89-EA-06K

Black plate (254,1)

3. Install the lug nuts with the bevelededge inward; tighten them by hand.

WARNINGDo not apply oil or grease to lug nutsand bolts and do not tighten the lugnuts beyond the recommendedtightening torque:Applying oil or grease to lug nuts andbolts is dangerous. The lug nuts couldloosen while driving and cause the tireto come off, resulting in an accident.In addition, lug nuts and bolts couldbe damaged if tightened more thannecessary.

4. Turn the lug wrench counterclockwiseand lower the vehicle. Use the lugwrench to tighten the nuts in the ordershown.

If you're unsure of how tight the nutsshould be, have them inspected at anAuthorized Mazda Dealer.

Nut tightening torque

N·m (kgf·m, ft·lbf)88―118

(9―12, 65―87)

7-12


Flat Tire


Form No.8W89-EA-06K

Black plate (255,1)

WARNINGAlways securely and correctly tightenthe lug nuts:Improperly or loosely tightened lugnuts are dangerous. The wheel couldwobble or come off. This could resultin loss of vehicle control and cause aserious accident.

Be sure to reinstall the same nuts youremoved or replace them with metricnuts of the same configuration:Because the wheel studs and lug nutson your Mazda have metric threads,using a non-metric nut is dangerous.On a metric stud, it would not securethe wheel and would damage the stud,which could cause the wheel to slip offand cause an accident.

5. Store the damaged tire, using the tirehold-down bolt to hold it in place.

Without sub-woofer

Tire hold-down boltTire clamp

With sub-woofer

Lock washerTire hold-down bolt (Gold)

Sub-woofer

6. Check the inflation pressure. Refer tothe specification charts on page 10-8.

7. Have the flat tire repaired or replacedas soon as possible.

WARNINGDo not drive with any tires that haveincorrect air pressure:Driving on tires with incorrect airpressure is dangerous. Tires withincorrect pressure could affecthandling and result in an accident.When you check the regular tires' airpressure, check the spare tire, too.

NOTE

(5-Door with sub-woofer)When storing a damaged conventionaltire in the luggage compartment, thesub-woofer can be stored in its originalposition, however, the sub-wooferconnector on the trunk board cannot beconnected.


Flat Tire

7-13


Form No.8W89-EA-06K

Black plate (256,1)

NOTE

To prevent the jack and tool fromrattling, store them properly.

7-14


Flat Tire


Form No.8W89-EA-06K

Black plate (257,1)

OverheatingIf the temperature gauge indicatesoverheating, the vehicle loses power, oryou hear a loud knocking or pingingnoise, the engine is probably too hot.

WARNING

Turn the ignition switch off andremove the key from the ignitionswitch when you inspect the engine:Inspecting the engine with the ignitionswitch in the ON position isdangerous. The cooling fan could turnon unexpectedly even when the engineis not running. You could be seriouslyinjured by the fan.

Do not remove eithercooling system caps when the engineand radiator are hot:When the engine and radiator are hot,scalding coolant and steam may shootout under pressure and cause seriousinjury.

Open the hood ONLYafter steam is nolonger escaping from the engine:Steam from an overheated engine isdangerous. The escaping steam couldseriously burn you.

If the temperature gauge indicatesoverheating:

1. Drive safely to the side of the road andpark off the right-of-way.

2. Put a vehicle with an automatictransaxle in park (P), a manualtransaxle in neutral.

3. Apply the parking brake.

4. Turn off the air conditioner.

5. Check whether coolant or steam isescaping from under the hood or fromthe engine compartment.

If steam is coming from the enginecompartment:Don't go near the front of the vehicle.Stop the engine.Wait until the steam dissipates, thenopen the hood and start the engine.

If neither coolant nor steam isescaping:Open the hood and idle the engine untilit cools.

CAUTIONIf the cooling fan does not operatewhile the engine is running, the enginetemperature will increase. Stop theengine and call an Authorized MazdaDealer.

6. Make sure the cooling fan is operating,then turn off the engine after thetemperature has decreased.

7. When cool, check the coolant level.If it's low, look for coolant leaks fromthe radiator and hoses.


Overheating

7-15


Form No.8W89-EA-06K

Black plate (258,1)

If you find a leak or other damage, or ifcoolant is still leaking:Stop the engine and call an AuthorizedMazda Dealer.

2.3-liter engineCooling system cap

Coolant reservoir

Coolingsystem cap

Coolant reservoir

3.0-liter engine

If you find no problems, the engine iscool, and no leaks are obvious:Carefully add coolant as required (page8-20).

CAUTIONIf the engine continues to overheat orfrequently overheats, have the coolingsystem inspected. The engine could beseriously damaged unless repairs aremade. Consult an Authorized MazdaDealer.

7-16


Overheating


Form No.8W89-EA-06K

Black plate (259,1)

Starting a Flooded EngineIf the engine fails to start, it may beflooded (excessive fuel in the engine).

Follow this procedure:

1. Depress the accelerator all the way andhold it there.

2. Turn the ignition switch to the STARTposition and hold it there―for up to 10seconds. If the engine starts, release thekey and accelerator immediatelybecause the engine will suddenly revup.

3. If the engine fails to start, crank itwithout depressing the accelerator―forup to 10 seconds.


Emergency Starting

7-17


Form No.8W89-EA-06K

Black plate (260,1)

Jump-StartingJump-starting is dangerous if done incorrectly. So follow the procedure carefully. If youfeel unsure about jump-starting, we strongly recommend that you have a competent servicetechnician do the work.

WARNINGAlways wear eye protection when working near the battery:Working without eye protection is dangerous. Battery fluid contains SULFURICACID which could cause blindness if splashed into your eyes. Also, hydrogen gasproduced during normal battery operation, could ignite and cause the battery toexplode.

Wear eye protection and protective gloves to prevent contact with battery fluid:Spilled battery fluid is dangerous.Battery fluid contains SULFURIC ACID which could cause serious injuries if it getsin eyes, skin or clothing. If this happens, immediately flush your eyes with water for15 minutes or wash your skin thoroughly and get medical attention.

Always keep batteries out of the reach of children:Allowing children to play near batteries is dangerous. Battery fluid could causeserious injuries if it gets in the eyes or on the skin.

Do not allow the positive ( ) terminal to contact any other metal object that couldcause sparks:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. When working near a battery,do not allow metal tools to contact the positive ( ) or negative ( ) terminal of thebattery.

Keep all flames, including cigarettes, and sparks away from open battery cells:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries.

Do not jump-start a frozen battery or one with a low fluid level:Jump-starting a frozen battery or one with a low fluid level is dangerous. It mayrupture or explode, causing serious injury.

7-18


Emergency Starting


Form No.8W89-EA-06K

Black plate (261,1)

WARNINGConnect the negative cable to a good ground point away from the battery:Connecting the end of the second jumper cable to the negative ( ) terminal of thedischarged battery is dangerous.A spark could cause the gas around the battery to explode and injure someone.

Route the jumper cables away from parts that will be moving:Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.The cable could get caught when the engine starts and cause serious injury.

CAUTIONUse only a 12 V booster system. You can damage a 12 V starter, ignition system, andother electrical parts beyond repair with a 24 V power supply (two 12 V batteries inseries or a 24 V motor generator set).

1. Make sure the booster battery is 12 Vand that its negative terminal isgrounded.

2. If the booster battery is in anothervehicle, don't allow the vehicles totouch. Turn off the engine of thevehicle with the booster battery and allunnecessary electrical loads in bothvehicles.

3. Connect the jumper cables in the exactsequence as in the illustration.

l Connect one end of a cable to thepositive terminal on the dischargedbattery (1).

l Attach the other end to the positiveterminal on the booster battery (2).

l Connect one end of the other cableto the negative terminal of thebooster battery (3).

l Connect the other end to a solid,stationary, exposed metallic point(for example, the strut mountingbolt) away from the dischargedbattery (4).

Connect cables in numerical order and disconnect in reverse order. Discharged

battery

Jumper cables

Booster battery

4. Start the engine of the booster vehicleand run it a few minutes. Then start theengine of the other vehicle.

5. When finished, carefully disconnect thecables in the reverse order described inStep 3.


Emergency Starting

7-19


Form No.8W89-EA-06K

Black plate (262,1)

Push-Starting

WARNINGNever tow a vehicle to start it:Towing a vehicle to start it isdangerous. The vehicle being towedcould surge forward when its enginestarts, causing the two vehicles tocollide. The occupants could beinjured.

You can't start a vehicle with an automatictransaxle by pushing it.

CAUTIONDo not push-start a vehicle that has amanual transaxle. It can damage theemission control system.

7-20


Emergency Starting


Form No.8W89-EA-06K

Black plate (263,1)

Towing DescriptionWe recommend that towing be done onlyby an Authorized Mazda Dealer or acommercial tow-truck service.

Proper lifting and towing are necessary toprevent damage to the vehicle.Government and local laws must befollowed.

A towed vehicle usually should have itsfront wheels off the ground. If excessivedamage or other conditions prevent this,use wheel dollies.

Wheel dollies

When towing with the rear wheels on theground, release the parking brake.

CAUTIONDon't tow the vehicle pointed backwardwith driving wheels on the ground. Thismay cause internal damage to thetransaxle.

CAUTIONDon't tow with sling-type equipment.This could damage your vehicle. Usewheel-lift or flatbed equipment.


Emergency Towing

7-21


Form No.8W89-EA-06K

Black plate (264,1)

CAUTIONDo not use the hooks under the rearbumper for towing and tying down, asthey cannot hold the load and it willdamage the bumper.

Hooks

Recreational TowingAn example of “recreational towing” istowing your vehicle behind a motorhome.The transaxle is not designed for towingthis vehicle on all 4 wheels.When doing recreational towing refer to“Towing Description” (page 7-21) andcarefully follow the instructions.

7-22


Emergency Towing


Form No.8W89-EA-06K

Black plate (265,1)

8 Maintenance and Care

How to keep your Mazda in top condition.

Introduction .................................................................................. 8-2Introduction ............................................................................... 8-2

Scheduled Maintenance ................................................................ 8-3Scheduled Maintenance (USA, Canada, and Puerto Rico) ....... 8-3Scheduled Maintenance (Mexico) ............................................. 8-8

Owner Maintenance ................................................................... 8-15Owner Maintenance Schedule ................................................ 8-15Owner Maintenance Precautions ............................................. 8-16Engine Compartment Overview .............................................. 8-17Engine Oil ............................................................................... 8-18Engine Coolant ....................................................................... 8-20Brake/Clutch Fluid .................................................................. 8-22Power Steering Fluid ............................................................... 8-23Automatic Transaxle Fluid (ATF) ........................................... 8-24Washer Fluid ........................................................................... 8-27Body Lubrication .................................................................... 8-28Wiper Blades ........................................................................... 8-28Battery ..................................................................................... 8-33Tires ........................................................................................ 8-34Light Bulbs ............................................................................. 8-39Fuses ....................................................................................... 8-49

Appearance Care ........................................................................ 8-54How to Minimize Environmental Paint Damage .................... 8-54Exterior Care ........................................................................... 8-56Interior Care ............................................................................ 8-59

8-1


Form No.8W89-EA-06K

Black plate (266,1)

IntroductionBe extremely careful and prevent injury to yourself and others or damage to your vehiclewhen using this manual for inspection and maintenance.

If you're unsure about any procedure it describes, we strongly urge you to have a reliableand qualified service shop perform the work, preferably an Authorized Mazda Dealer.

Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.Without this expertise and the parts that have been designed and made especially for yourMazda, inadequate, incomplete, and insufficient servicing may result in problems. Thiscould lead to vehicle damage or an accident and injuries.

For expert advice and quality service, consult an Authorized Mazda Dealer.

The owner should retain evidence that proper maintenance has been performed asprescribed.

Claims against the warranty resulting from lack of maintenance, as opposed to defectivematerials or authorized Mazda workmanship, will not be honored.

Any auto repair shop using parts equivalent to your Mazda's original equipment mayperform maintenance. But we recommend that it always be done by an AuthorizedMazda Dealer using genuine Mazda parts.

8-2

Maintenance and Care

Introduction


Form No.8W89-EA-06K

Black plate (267,1)

Scheduled Maintenance (USA, Canada, and Puerto Rico)Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply.If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).

l Repeated short-distance driving

l Driving in dusty conditions

l Driving with extended use of brakes

l Driving in areas where salt or other corrosive materials are being used

l Driving on rough or muddy roads

l Extended periods of idling or low-speed operation

l Driving for long periods in cold temperatures or extremely humid climates

NOTE

After the prescribed period, continue to follow the described maintenance at therecommended intervals.


Scheduled Maintenance

8-3


Form No.8W89-EA-06K

Black plate (268,1)

qSchedule 1

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months 6 12 18 24 30 36 42 48

×1000 km 12 24 36 48 60 72 84 96

×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60

ENGINE

Drive belts (tension)2.3-liter engine I

3.0-liter engine I I

Engine valve clearance (for 2.3-liter engine)Audible inspect every 120,000 km (75,000 miles),

if noisy, adjust

Engine oil R R R R R R R R

Engine oil filter R R R R R R R R

COOLING SYSTEM

Cooling system I I

Engine coolantFL22 type *1 Replace at first 192,000 km (120,000 miles) or 10 years; after

that, every 96,000 km (60,000 miles) or 5 years

OthersReplace at first 168,000 km (105,000 miles) or 5 years; after


FUEL SYSTEM

Air filter R

Fuel lines and hoses *2 I I

Hoses and tubes for emission *2 I

IGNITION SYSTEM

Spark plugs Replace every 120,000 km (75,000 miles)

CHASSIS and BODY

Brake lines, hoses and connections I I

Disc brakes I I I I

Tire (Rotation) Rotate every 12,000 km (7,500 miles)

Steering operation and linkages I I

Front and rear suspension, ball joints and wheelbearing axial play

I I

Driveshaft dust boots I I

Bolts and nuts on chassis and body T T

Exhaust system and heat shields Inspect every 72,000 km (45,000 miles) or 5 years

All locks and hinges L L L L L L L L

8-4




Form No.8W89-EA-06K

Black plate (269,1)



Months 6 12 18 24 30 36 42 48

×1000 km 12 24 36 48 60 72 84 96

×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60

AIR CONDITIONER SYSTEM (if installed)

Cabin air filter Replace every 40,000 km (25,000 miles) or 2 years

Chart symbols:

I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateT: Tighten

Remarks:

*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surroundingarea. Use FL22 when replacing the coolant.

*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or mileage/kilometer period to ensure long-term reliability.



8-5


Form No.8W89-EA-06K

Black plate (270,1)

qSchedule 2



Months 4 8 12 16 20 24 28 32 36 40 44 48

×1000 km 8 16 24 32 40 48 56 64 72 80 88 96

×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60

ENGINE

Drive belts (tension)2.3-liter engine I

3.0-liter engine I I

Engine valve clearance (for 2.3-liter engine)Audible inspect every 120,000 km (75,000 miles), if noisy,

adjust

Engine oilPuerto Rico Replace every 5,000 km (3,000 miles) or 3 months

Others R R R R R R R R R R R R

Engine oil filter R R R R R R R R R R R R

COOLING SYSTEM

Cooling system I I

Engine coolantFL22 type *1 Replace at first 192,000 km (120,000 miles) or 10 years; after


OthersReplace at first 168,000 km (105,000 miles) or 5 years; after


Engine coolant level I I I I I I I I I I I I

FUEL SYSTEM

Air filterPuerto Rico R R

Others R

Fuel lines and hoses *2 I I

Hoses and tubes for emission *2 I

IGNITION SYSTEM

Spark plugsUSA Replace every 96,000 km (60,000 miles)

Others *3 Replace every 120,000 km (75,000 miles)

ELECTRICAL SYSTEM

Function of all lights I I I I I I I I I I I I

8-6




Form No.8W89-EA-06K

Black plate (271,1)



Months 4 8 12 16 20 24 28 32 36 40 44 48

×1000 km 8 16 24 32 40 48 56 64 72 80 88 96

×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60

CHASSIS and BODY

Brake lines, hoses and connections I I

Brake fluid level I I I I I I I I I I I I

Disc brakes I I I I

Tire (Rotation) Rotate every 8,000 km (5,000 miles)

Tire inflation pressure and tire wear I I I I I I I I I I I I

Steering operation and linkages I I

Power steering fluid level I I I I I I I I I I I I


I I

Driveshaft dust boots I I

Bolts and nuts on chassis and body T T

Exhaust system and heat shields Inspect every 72,000 km (45,000 miles) or 5 years

All locks and hinges L L L L L L L L L L L L

Washer fluid level I I I I I I I I I I I I


Cabin air filter Replace every 40,000 km (25,000 miles) or 2 years

Chart symbols:


Remarks:


*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or mileage/kilometer period to ensure long-term reliability.

*3 If the vehicle is operated under any of the following conditions, replace the spark plugs every 96,000 km(60,000 miles) or shorter.a) Repeated short-distance drivingb) Extended periods of idling or low-speed operationc) Driving for long periods in cold temperatures or extremely humid climates



8-7


Form No.8W89-EA-06K

Black plate (272,1)

Scheduled Maintenance (Mexico)Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply.If any do apply, follow Schedule 2.

l Repeated short-distance driving

l Driving in dusty conditions

l Driving with extended use of brakes

l Driving in areas where salt or other corrosive materials are being used

l Driving on rough or muddy roads

l Extended periods of idling or low-speed operation

l Driving for long periods in cold temperatures or extremely humid climates

l Driving in extremely hot conditions

l Driving in mountainous conditions continually

NOTE

After the prescribed period, continue to follow the described maintenance at therecommended intervals.

8-8




Form No.8W89-EA-06K

Black plate (273,1)

qSchedule 1


Number of months or kilometers, whichever comes first

Months 6 12 18 24 30 36 42 48 54 60 66 72

×1000 km 10 20 30 40 50 60 70 80 90 100 110 120

ENGINE

Drive belts (tension) I I I

Engine valve clearance (for 2.3-liter engine) Audible inspect every 120,000 km, if noisy, adjust

Engine oil R R R R R R R R R R R R


COOLING SYSTEM

Cooling system I I I

Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years;

after that, every 60,000 km or 3 years

Others R R R

FUEL SYSTEM

Air filter R R R R R R

Fuel lines and hoses I *2 I *2 I

Hoses and tubes for emission I *2 I *2 I

Fuel filter R R R

IGNITION SYSTEM

Spark plugs Replace every 60,000 km

CHASSIS and BODY

Brake lines, hoses and connections I I I I I I

Brake fluid level I I I I I I I I I

Brake fluid R R R

Disc brakes I I I I I I I I I I I I

Tire (Rotation) Rotate every 10,000 km

Tire inflation pressure and tire wear I I I I I I I I I I I I

Steering operation and linkages I I I I I I I I I I I I

Power steering fluid level I I I I I I I I I I I I


I I I I I I

Driveshaft dust boots I I I I I I

Bolts and nuts on chassis and body T T T T T T

Exhaust system and heat shields I I I I I I

All locks and hinges L L L L L L L L L L L L

Washer fluid level I I I I I I I I I I I I



8-9


Form No.8W89-EA-06K

Black plate (274,1)



Months 6 12 18 24 30 36 42 48 54 60 66 72

×1000 km 10 20 30 40 50 60 70 80 90 100 110 120


Cabin air filter R R R

Chart symbols:


Remarks:


*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or kilometer period to ensure long-term reliability.

8-10




Form No.8W89-EA-06K

Black plate (275,1)

qSchedule 2



Months 3 6 9 12 15 18 21 24 27 30 33 36

×1000 km 5 10 15 20 25 30 35 40 45 50 55 60

ENGINE

Drive belts (tension) I




COOLING SYSTEM

Cooling system I

Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years; after that, every

60,000 km or 3 years

Others R


FUEL SYSTEM

Air filter C R C R C R

Fuel lines and hoses I *2

Hoses and tubes for emission I *2

Fuel filter R

IGNITION SYSTEM


ELECTRICAL SYSTEM


CHASSIS and BODY

Brake lines, hoses and connections I I I

Brake fluid level I I I I I

Brake fluid R

Disc brakes I I I I I I


Tire inflation pressure and tire wear I I I I I I

Steering operation and linkages I I I I I I

Power steering fluid level I I I I I I


I I I

Driveshaft dust boots I I I

Bolts and nuts on chassis and body T T T

Exhaust system and heat shields I I I

All locks and hinges L L L L L L

Washer fluid level I I I I I I



8-11


Form No.8W89-EA-06K

Black plate (276,1)



Months 3 6 9 12 15 18 21 24 27 30 33 36

×1000 km 5 10 15 20 25 30 35 40 45 50 55 60



Chart symbols:

I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateC: CleanT: Tighten

Remarks:



8-12




Form No.8W89-EA-06K

Black plate (277,1)

(Cont.)



Months 39 42 45 48 51 54 57 60 63 66 69 72

×1000 km 65 70 75 80 85 90 95 100 105 110 115 120

ENGINE

Drive belts (tension) I I




COOLING SYSTEM

Cooling system I I

Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years; after that, every

60,000 km or 3 years

Others R R


FUEL SYSTEM

Air filter C R C R C R

Fuel lines and hoses I *2 I

Hoses and tubes for emission I *2 I

Fuel filter R R

IGNITION SYSTEM


ELECTRICAL SYSTEM


CHASSIS and BODY

Brake lines, hoses and connections I I I

Brake fluid level I I I I

Brake fluid R R

Disc brakes I I I I I I


Tire inflation pressure and tire wear I I I I I I

Steering operation and linkages I I I I I I

Power steering fluid level I I I I I I


I I I

Driveshaft dust boots I I I

Bolts and nuts on chassis and body T T T

Exhaust system and heat shields I I I

All locks and hinges L L L L L L

Washer fluid level I I I I I I



8-13


Form No.8W89-EA-06K

Black plate (278,1)



Months 39 42 45 48 51 54 57 60 63 66 69 72

×1000 km 65 70 75 80 85 90 95 100 105 110 115 120



Chart symbols:

I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateC: CleanT: Tighten

Remarks:



8-14




Form No.8W89-EA-06K

Black plate (279,1)

Owner Maintenance ScheduleThe owner or a qualified service technician should make these vehicle inspections at theindicated intervals to ensure safe and dependable operation.

Bring any problem to the attention of an Authorized Mazda Dealer or qualified servicetechnician as soon as possible.

qWhen Refueling

l Brake and clutch fluid level (page 8-22)

l Engine coolant level (page 8-20)

l Engine oil level (page 8-19)

l Washer fluid level (page 8-27)

qAt Least Monthly

Tire inflation pressures (page 8-35)

qAt Least Twice a Year (For Example, Every Spring and Fall)

l Automatic transaxle fluid level (page 8-24)

l Power steering fluid level (page 8-23)

You can do the following scheduled maintenance items if you have some mechanicalability and a few basic tools and if you closely follow the directions in this manual.

l Engine coolant (page 8-20)

l Engine oil (page 8-18)


Owner Maintenance

8-15


Form No.8W89-EA-06K

Black plate (280,1)

Owner Maintenance PrecautionsImproper or incomplete service may result in problems. This section gives instructions onlyfor items that are easy to perform.

As explained in the Introduction (page 8-2), several procedures can be done only by aqualified service technician with special tools.

Improper owner maintenance during the warranty period may affect warranty coverage.For details, read the separate Mazda Warranty statement provided with the vehicle. Ifyou're unsure about any servicing or maintenance procedure, have it done by anAuthorized Mazda Dealer.

There are strict environmental laws regarding the disposal of waste oil and fluids. Pleasedispose of your waste properly and with due regard to the environment.

We recommend that you entrust the oil and fluid changes of your vehicle to an AuthorizedMazda Dealer.

WARNINGMaintenance Procedures:Performing maintenance work on a vehicle is dangerous if not done properly. You canbe seriously injured while performing some maintenance procedures. If you lacksufficient knowledge and experience or the proper tools and equipment to do the work,have it done by a qualified technician.

Running the Engine:Working under the hood with the engine running is dangerous. It becomes even moredangerous when you wear jewelry or loose clothing.Either can become entangled in moving parts and result in injury.Therefore, if you must run the engine while working under the hood, make certainthat you remove all jewelry (especially rings, bracelets, watches, and necklaces) andall neckties, scarves, and similar loose clothing before getting near the engine orcooling fan which may turn on unexpectedly.

Electrical Fan and Engine Inspection:Inspecting the engine with the ignition switch in the ON position is dangerous. Thecooling fan could come on unexpectedly even when the engine isn't running. Youcould be seriously injured by the fan. Turn the ignition switch off and remove the keyfrom the ignition switch when you inspect the engine.

8-16


Owner Maintenance


Form No.8W89-EA-06K

Black plate (281,1)

Engine Compartment Overview

Power steering fluid reservoir

Windshield washer fluid reservoir

Fuse block

Air filter

Brake/Clutch fluid reservoir

Engine coolant reservoir

Engine coolant reservoir

Automatic transaxle fluid-level dipstick (only for automatic transaxle)

Automatic transaxle fluid-level dipstick (only for automatic transaxle)

2.3-liter engine

3.0-liter engine

Battery

Engine oil dipstick

Windshield washer fluid reservoir

Power steering fluid reservoir

Cooling system cap

Engine oil-filler capBrake/Clutch fluid reservoir

Air filter

Fuse block

Battery

Engine oil-filler cap

Engine oil dipstick

Cooling system cap


Owner Maintenance

8-17


Form No.8W89-EA-06K

Black plate (282,1)

Engine Oil

NOTE

Changing the engine oil should be doneby an Authorized Mazda Dealer.

qRecommended Oil

Use SAE 5W-20 engine oil.Oil container labels provide importantinformation.A chief contribution this type of oil makesto fuel economy is reducing the amount offuel necessary to overcome enginefriction.

U.S.A. and CANADA

(ILSAC)

Only use oils “Certified For GasolineEngines” by the American PetroleumInstitute (API). An oil with this trademarksymbol conforms to the current engineand emission system protection standardsand fuel economy requirements of theInternational Lubricant Standardizationand Approval Committee (ILSAC),comprised of U.S. and Japaneseautomobile manufacturers.

5W-20

120100806040200–20

50403020100–10–20–30

Except U.S.A. and CANADA

(ILSAC)

Use SAE 5W-20 engine oil. If SAE 5W-20 engine oil is not available in your market. Use SAE 5W-30 engine oil.

Mexico

8-18


Owner Maintenance


Form No.8W89-EA-06K

Black plate (283,1)

The quality designation SL, or ILSACmust be on the label.

5W-20

120100806040200–20

50403020100–10–20–30

qInspecting Engine Oil Level

1. Be sure the vehicle is on a levelsurface.

2. Warm up the engine to normaloperating temperature.

3. Turn it off and wait at least 5 minutesfor the oil to return to the oil pan.

4. Pull out the dipstick, wipe it clean, andreinsert it fully.

Full

Low

OK

2.3-liter engine

3.0-liter engine

FullOKLow

5. Pull it out again and examine the level.It's OK between Low and Full.But if it's near or below Low, addenough oil to bring the level to Full.

CAUTIONDon't add engine oil over Full. Thismay cause engine damage.

6. Make sure the O-ring on the dipstick ispositioned properly before reinsertingthe dipstick.


Owner Maintenance

8-19


Form No.8W89-EA-06K

Black plate (284,1)

Engine Coolant

qInspecting Coolant Level

WARNINGHot Engine:A hot engine is dangerous. If theengine has been running, parts of theengine compartment can become veryhot. You could be burned. Carefullyinspect the engine coolant in thecoolant reservoir, but do not open it.Do not use a match or live flame in theengine compartment. DO NOT ADDCOOLANT WHEN THE ENGINE ISHOT.

Cooling Fan and EngineInspection:Inspecting the engine with the ignitionswitch in the ON position isdangerous. The cooling fan could turnon unexpectedly even when the engineisn't running. You could be seriouslyinjured by the fan. Turn the ignitionswitch off and remove the key from theignition switch when you inspect theengine.

Cooling System Cap:When the engine and radiator are hot,scalding coolant and steam may shootout under pressure and cause seriousinjury. Don't remove the coolingsystem cap when the engine andradiator are hot.

NOTE

Changing the coolant should be doneby an Authorized Mazda Dealer.

Inspect the antifreeze protection andcoolant level in the coolant reservoir atleast once a year―at the beginning of thewinter season―and before travelingwhere temperatures may drop belowfreezing.

Inspect the condition and connections ofall cooling system and heater hoses.Replace any that are swollen ordeteriorated.

The coolant should be at full in theradiator and between the FULL or F andLOWor L marks on the coolant reservoirwhen the engine is cool.

2.3-liter engine

8-20


Owner Maintenance


Form No.8W89-EA-06K

Black plate (285,1)

3.0-liter engine

If it's at or near LOWor L, add enoughcoolant to the coolant reservoir to providefreezing and corrosion protection and tobring the level to FULL or F.

CAUTIONl Radiator coolant will damage paint.Rinse it off quickly if spilled.

l Use only soft (demineralized) waterin the coolant mixture. Water thatcontains minerals will cut down onthe coolant's effectiveness.

l Don't add only water. Always add aproper coolant mixture.

l The engine has aluminum parts andmust be protected by an ethylene-glycol-based coolant to preventcorrosion and freezing.

l DO NOT USE coolants ContainingAlcohol, methanol, Borate orSilicate.These coolants could damage thecooling system.

l DO NOT MIX alcohol or methanolwith the coolant. This could damagethe cooling system.

l Don't use a solution that containsmore than 60% antifreeze.This would reduce effectiveness.


Owner Maintenance

8-21


Form No.8W89-EA-06K

Black plate (286,1)

NOTE

If the “FL22” mark is shown on or nearthe cooling system cap, use FL22 typeengine coolant. If engine coolant otherthan FL22 type is used, the enginecoolant must be replaced earlier thanthe specified replacement intervalindicated in the scheduled maintenance(page 8-3).

If the coolant reservoir is empty or newcoolant is required frequently, consult anAuthorized Mazda Dealer.

Brake/Clutch Fluid

qInspecting Brake/Clutch Fluid Level

The brakes and clutch draw fluid from thesame reservoir.Inspect the fluid level in the reservoirregularly. It should be kept at MAX.The level normally drops withaccumulated distance, a conditionassociated with wear of brake and clutchlinings. If it is excessively low, have thebrake/clutch system inspected by anAuthorized Mazda Dealer.

8-22


Owner Maintenance


Form No.8W89-EA-06K

Black plate (287,1)

qAdding Brake/Clutch Fluid

WARNINGSpilled Brake Fluid:Spilled brake fluid is dangerous. If itgets in your eyes, they could beseriously injured. If this happens,immediately flush your eyes with waterand get medical attention. Brake fluidspilled on a hot engine could cause afire. Be careful not to spill brake fluidon yourself or on the engine.

Low Brake/Clutch Fluid Levels:Low brake/clutch fluid levels aredangerous. Low levels could signalbrake lining wear or a brake systemleak. Your brakes could fail and causean accident. If you find a low fluidlevel, have the brakes and clutchinspected.

If the fluid level is low, add fluid until itreaches MAX.Before adding fluid, thoroughly clean thearea around the cap.

CAUTIONl Brake and clutch fluid will damagepainted surfaces. If brake or clutchfluid does get on a painted surface,wipe it off immediately.

l Using nonspecified brake and clutchfluids (page 10-5) will damage thesystems. Mixing different fluids willalso damage them.If the brake/clutch system frequentlyrequires new fluid, consult anAuthorized Mazda Dealer.

Power Steering Fluid

qInspecting Power Steering FluidLevel

CAUTIONTo avoid damage to the power steeringpump, don't operate the vehicle for longperiods when the power steering fluidlevel is low.

NOTE

Use specified power steering fluid(page 10-5).

2.3-liter engine

Inspect the fluid level in the reservoir ateach engine oil change with the engine offand cold. Add fluid if necessary; it doesnot require periodic changing.

The level must be kept between MIN andMAX.

Visually examine the lines and hoses forleaks and damage.


Owner Maintenance

8-23


Form No.8W89-EA-06K

Black plate (288,1)

If new fluid is required frequently, consultan Authorized Mazda Dealer.

3.0-liter engine

Inspect the fluid level at each engine oilchange. Add fluid if necessary; it does notrequire periodic changing.

LowOK

High

Loosen Tighten

The level must be kept between the H andL marks.

Visually examine the lines and hoses forleaks and damage.

1. Park on a level surface, well off theright-of-way, and set the parking brakefirmly.

2. Turn off the engine and allow it tocool.

3. Remove the filler cap and attacheddipstick.

4. Wipe them clean and put them back.

5. Remove again and inspect the level.

6. It must be between H and L. Add fluidif necessary.

Don't overfill.If new fluid is required frequently, consultan Authorized Mazda Dealer.

Automatic Transaxle Fluid(ATF)

qInspecting Automatic TransaxleFluid Level

The automatic transaxle fluid level shouldbe inspected regularly. Measure it asdescribed below.

2.3-liter engine

CAUTIONl Always check the automatictransaxle fluid level according to thefollowing procedure. If theprocedure is not done correctly, theautomatic transaxle fluid levelcannot be measured accuratelywhich could lead to automatictransaxle damage.

l A low fluid level can cause transaxleslippage. Overfilling can causefoaming, loss of fluid, and transaxlemalfunction.

l Use only the specified fluid. A non-specified fluid could result intransaxle malfunction and failure.

1. Park on a level surface and set theparking brake firmly.

2. Make sure there is no ATF leakagefrom the ATF hose or the housing.

3. Shift the shift lever to the park position(P), start the engine and warm it up.

8-24


Owner Maintenance


Form No.8W89-EA-06K

Black plate (289,1)

CAUTIONDo not shift the shift lever while theengine is warming up. If the ATF levelis extremely low, the automatictransaxle could be damaged.

4. While the engine is still idling, pull outthe dipstick and wipe it clean, and thenput it back.

5. Check the ATF level. If there is no ATFadhering 5 mm from the end of thedipstick, add ATF.

CAUTIONIf there is no ATF adhering to thedipstick even after the engine has beenwarmed up, do not drive the vehicle.Otherwise, the automatic transaxlecould be damaged.

6. Shift the shift lever to each range andposition, and make sure there is noabnormality.

7. Drive the vehicle on city roads for5 km (3.1 mile) or more.


9. Shift the shift lever to the park position(P), check the ATF level while theengine is idling, and make sure that theATF level is within the proper level. Ifthe ATF level is not within the properlevel, add ATF.The proper fluid level is marked on thedipstick as follows.

Low

Full

2.3-liter engine

3.0-liter engine

The volume of fluid changes with thetemperature. Fluid must be checked at idlewithout driving at normal operatingtemperature.

CAUTIONl Low fluid level causes transaxleslippage. Overfilling can causefoaming, loss of fluid, and transaxlemalfunction.

l Use specified fluid (page 10-5). Anonspecified fluid could result intransaxle malfunction and failure.


2. Start the engine and depress the brakepedal.


Owner Maintenance

8-25


Form No.8W89-EA-06K

Black plate (290,1)

3. Move the shift lever through all ranges,then set it at P.

WARNINGSudden Vehicle Movement:Shifting the shift lever without firstdepressing the brake pedal isdangerous. The vehicle could movesuddenly and cause an accident.Make sure the brake pedal is appliedbefore shifting the shift lever.

4. With the engine still idling, pull out thedipstick, wipe it clean, and put it back.

5. Pull it out again.The proper fluid level is marked on thedipstick as follows.

AFull

BLow

3.0-liter engine

Fluid hot scale A

When the vehicle has been driven and thefluid is at normal operating temperature,about 65°C (150°F), the level must bebetween Full and Low.

Fluid cold scale B

When the engine has not been runningand the outside temperature is about 20°C(70°F), the fluid level should be close to,but not above, the bottom notch on thedipstick.

CAUTIONl Use the cold scale only as areference.

l If outside temperature is lower thanabout 20°C (70°F), start the engineand inspect the fluid level after theengine reaches operatingtemperature.

l If the vehicle has been driven for anextended period at high speeds or incity traffic in hot weather, inspect thelevel only after stopping the engineand allowing the fluid to cool for 30minutes.

Fully insert the dipstick. When addingfluid, inspect with the dipstick to makesure it doesn't pass full.

NOTE

Inspect the fluid on both sides of thedipstick in a well lit area for an accuratereading.

8-26


Owner Maintenance


Form No.8W89-EA-06K

Black plate (291,1)

Washer Fluid

qInspecting Washer Fluid Level

WARNINGUse only windshield washer fluid orplain water in the reservoir:Using radiator antifreeze as washerfluid is dangerous. If sprayed on thewindshield, it will dirty the windshield,affect your visibility, and could resultin an accident.

Using Washer Fluid Without Anti-freeze Protection in Cold Weather:Operating your vehicle intemperatures below 4 degrees C (40degrees F) using washer fluid withoutanti-freeze protection is dangerous asit could cause impaired windshieldvision and result in an accident. Incold weather, always use washer fluidwith anti-freeze protection.

NOTE

State or local regulations may restrictthe use of volatile organic compounds(VOCs), which are commonly used asanti-freeze agents in washer fluid. Awasher fluid with limited VOC contentshould be used only if it providesadequate freeze resistance for allregions and climates in which thevehicle will be operated.

Inspect fluid level in the washer fluidreservoir; add fluid if necessary.

Use plain water if washer fluid isunavailable.But use only washer fluid in cold weatherto prevent it from freezing.


Owner Maintenance

8-27


Form No.8W89-EA-06K

Black plate (292,1)

Body LubricationAll moving points of the body, such asdoor and hood hinges and locks, shouldbe lubricated each time the engine oil ischanged. Use a nonfreezing lubricant onlocks during cold weather.

Make sure the hood's secondary latchkeeps the hood from opening when theprimary latch is released.

Wiper Blades

CAUTIONl Hot waxes applied by automatic carwashers have been known to affectthe wiper's ability to clean windows.

l To prevent damage to the wiperblades, don't use gasoline, kerosene,paint thinner, or other solvents on ornear them.

Contamination of either the windshield orthe blades with foreign matter can reducewiper effectiveness. Common sources areinsects, tree sap, and hot wax treatmentsused by some commercial car washes.

If the blades are not wiping properly,clean the window and blades with a goodcleaner or mild detergent; then rinsethoroughly with clean water. Repeat ifnecessary.

qReplacing Windshield Wiper Blades

When the wipers no longer clean well, theblades are probably worn or cracked.Replace them.

CAUTIONTo prevent damage to the wiper armsand other components, don't try tosweep the wiper arm by hand.

8-28


Owner Maintenance


Form No.8W89-EA-06K

Black plate (293,1)

NOTE

To prevent damage to the wiper armblades when raising both the driver andpassenger side wiper arms, raise thedriver side wiper arm first. Conversely,when setting down the wiper arms, setthe passenger side wiper arm downfirst.

1. Raise the wiper arm and turn the bladeassembly to expose the plastic lockingclip.Compress the clip and slide theassembly downward; then lift it off thearm.

Plastic locking clip

CAUTIONTo prevent damage to the windshield letthe wiper arm down easily, don't let itslap down on the windshield.

2. Hold the end of the rubber and pulluntil the tabs are free of the metalsupport.

Metal support

Tab

3. Remove the metal stiffeners from theblade rubber and install them in thenew blade.


Owner Maintenance

8-29


Form No.8W89-EA-06K

Black plate (294,1)

CAUTIONl Don't bend or discard the stiffeners.You need to use them again.

l If the metal stiffeners are switched,the blade's wiping efficiency couldbe reduced.So don't use the driver's side metalstiffeners on the passenger's side, orvice versa.

l Be sure to reinstall the metalstiffeners in the new blade rubber sothat the curve is the same as it was inthe old blade rubber.

4. Carefully insert the new blade rubber.Then install the blade assembly in thereverse order of removal.

NOTE

Install the blade so that the tabs aretoward the bottom of the wiper arm.

qReplacing Rear Window WiperBlade (5-Door/Sport Wagon)

When the wiper no longer cleans well, theblade is probably worn or cracked.Replace it.

CAUTIONTo prevent damage to the wiper armand other components, don't move thewiper by hand.

(5-Door)

1. Raise the wiper arm and turn the bladeassembly to expose the plastic lockingclip.Compress the clip and slide theassembly downward; then lift it off thearm.

Plastic locking clip

CAUTIONTo prevent damage to the rear window,don't let the wiper arm fall on it.

8-30


Owner Maintenance


Form No.8W89-EA-06K

Black plate (295,1)

2. Hold the end of the blade rubber andpull until the tabs are free of the metalsupport.

Metal support

Tab

3. Remove the metal stiffeners from theblade rubber and install them in thenew blades.

CAUTIONDon't bend or discard the stiffeners.You need to use them again.


(Sport Wagon)

1. Raise the wiper arm and rotate thewiper blade to the right until it unlocks,then remove the blade.

CAUTIONTo prevent damage to the rear window,don't let the wiper arm fall on it.


Owner Maintenance

8-31


Form No.8W89-EA-06K

Black plate (296,1)

2. Pull down the blade rubber and slide itout of the blade holder.

3. Remove the metal stiffeners from theblade rubber and install them in thenew blades.

CAUTIONDon't bend or discard the stiffeners.You need to use them again.


8-32


Owner Maintenance


Form No.8W89-EA-06K

Black plate (297,1)

Battery

WARNINGBattery-Related Lead Materials:Battery posts, terminals and related accessories contain lead and lead compounds,chemicals known to the State of California to cause cancer and reproductive harm.Wash hands after handling.

Eye Protection:Working without eye protection is dangerous. Battery fluid contains SULFURICACID which could cause blindness if splashed into your eyes. Also, hydrogen gasproduced during normal battery operation, could ignite and cause the battery toexplode. Always wear eye protection when working near the battery.

Spilled Battery Fluid:Spilled battery fluid is dangerous.Battery fluid contains SULFURIC ACID which could cause serious injuries if it getsin eyes, skin or clothing. If this happens, immediately flush your eyes with water for15 minutes or wash your skin thoroughly and get medical attention. Wear eyeprotection and protective gloves to prevent contact with battery fluid.

Children and Batteries:Allowing children to play near batteries is dangerous. Battery fluid could causeserious injuries if it gets in the eyes or on the skin. Always keep batteries out of thereach of children.

Keep Flames Away:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames includingcigarettes and sparks away from open battery cells. When working near a battery, donot allow metal tools to contact the positive ( ) or negative ( ) terminal of thebattery. Do not allow the positive ( ) terminal to contact the vehicle body.

Battery-Related Explosion:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames, includingcigarettes, and sparks away from open battery cells.


Owner Maintenance

8-33


Form No.8W89-EA-06K

Black plate (298,1)

qBattery Maintenance

To get the best service from a battery:

l Keep it securely mounted.

l Keep the top clean and dry.

l Keep terminals and connections clean,tight, and coated with petroleum jellyor terminal grease.

l Rinse off spilled electrolyteimmediately with a solution of waterand baking soda.

l If the vehicle will not be used for anextended time, disconnect the batterycables and charge the battery every sixweeks.

TiresFor reasons of proper performance, safety,and better fuel economy, always maintainrecommended tire inflation pressures andstay within the recommended load limitsand weight distribution.

WARNINGUsing Different Tire Types:Driving your vehicle with differenttypes of tires is dangerous. It couldcause poor handling and poorbraking; leading to loss of control.Except for the limited use of thetemporary spare tire, use only thesame type tires (radial, bias-belted,bias-type) on all four wheels.

Using Wrong-Sized Tires:Using any other tire size than what isspecified for your Mazda (page 10-8)is dangerous. It could seriously affectride, handling, ground clearance, tireclearance, and speedometercalibration. This could cause you tohave an accident. Use only tires thatare the correct size specified for yourMazda.

8-34


Owner Maintenance


Form No.8W89-EA-06K

Black plate (299,1)

qTire Inflation Pressure

WARNINGIncorrect Tire Inflation:Overinflation or underinflation of tiresis dangerous. Adverse handling orunexpected tire failure could result ina serious accident. Always inflate thetires to the correct pressure (page10-8).

Inspect all tire pressures monthly(including the spare) when the tires arecold. Maintain recommended pressuresfor the best ride, top handling, andminimum tire wear.

Refer to the specification charts (page10-8).

NOTE

l Always check tire pressure whentires are cold.

l Warm tires normally exceedrecommended pressures. Don'trelease air from warm tires to adjustthe pressure.

l Underinflation can cause reducedfuel economy, uneven andaccelerated tire wear, and poorsealing of the tire bead, which willdeform the wheel and causeseparation of tire from rim.

l Overinflation can produce a harshride, uneven and accelerated tirewear, and a greater possibility ofdamage from road hazards.Keep your tire pressure at the correctlevels. If one frequently needsinflating, have it inspected.

qTire Rotation

To equalize tread wear, rotate the tires ifirregular wear develops. According to thescheduled maintenance charts.Refer toScheduled Maintenance on page 8-3.During rotation, inspect them for correctbalance.

Do not include (TEMPORARY USE ONLY) spare tire in rotation.

Forward


Owner Maintenance

8-35


Form No.8W89-EA-06K

Black plate (300,1)

Also, inspect them for uneven wear anddamage. Abnormal wear is usually causedby one or a combination of the following:

l Incorrect tire pressure

l Improper wheel alignment

l Out-of-balance wheel

l Severe braking

After rotation, inflate all tire pressures tospecification (page 10-8) and inspect thelug nuts for tightness.

CAUTIONRotate unidirectional tires and radialtires that have an asymmetrical treadpattern or studs only from front to rear,not from side to side. Tire performancewill be weakened if rotated from side toside.

qReplacing a Tire

WARNINGWorn Tires:Driving with worn tires is dangerous.Reduced braking, steering, andtraction could result in an accident.Always use tires that are in goodcondition.

If a tire wears evenly, a wear indicatorwill appear as a solid band across thetread.Replace the tire when this happens.

New tread

Tread wear indicator

Worn tread

You should replace it before the band isacross the entire tread.

NOTE

Tires degrade over time, even whenthey are not being used on the road. It isrecommended that tires generally bereplaced when they are 6 years or older.Heat caused by hot climates or frequenthigh loading conditions can acceleratethe aging process. You should replacethe spare tire when you replace theother road tires due to the aging of thespare tire. Regarding the manufacturingweek and year is indicated with 4 digit.Refer to The tire labeling on page 9-22.

8-36


Owner Maintenance


Form No.8W89-EA-06K

Black plate (301,1)

qTemporary Spare Tire

Inspect the temporary spare tire at leastmonthly to make sure it's properly inflatedand stored.

NOTE

The temporary spare tire conditiongradually deteriorates even if it has notbeen used.

The temporary spare tire is easier tohandle because of its construction. It islighter and smaller than a conventionaltire and should be used only for anemergency and only for a short distance.

Use the temporary only until theconventional tire is repaired, which shouldbe as soon as possible.

Maintain its pressure at 420 kPa (4.2kgf/cm2 or bar, 60 psi).

CAUTIONl Don't use your temporary spare tirerim with a snow tire or aconventional tire. Neither willproperly fit and could damage bothtire and rim.

l The temporary spare tire has a treadlife of less than 5,000 km (3,000miles). The tread life may be shorterdepending on driving conditions.

l The temporary spare tire is forlimited use, however, if the treadwear solid-band indicator appears,replace the tire with the same type oftemporary spare (page 8-36).

NOTE

Tires degrade over time, even whenthey are not being used on the road. It isrecommended that tires generally bereplaced when they are 6 years or older.Heat caused by hot climates or frequenthigh loading conditions can acceleratethe aging process. You should replacethe spare tire when you replace theother road tires due to the aging of thespare tire. Regarding the manufacturingweek and year is indicated with 4 digit.Refer to The tire labeling on page 9-22.

qReplacing a Wheel

WARNINGUsing a Wrong-Sized Wheel:Using a wrong-sized wheel isdangerous. Braking and handlingcould be affected, leading to loss ofcontrol and an accident. Always usewheels of the correct size on yourvehicle.

CAUTIONAwrong-sized wheel may adverselyaffect:

l Tire fit

l Wheel and bearing life

l Ground clearance

l Speedometer calibration

l Headlight aim

l Bumper height


Owner Maintenance

8-37


Form No.8W89-EA-06K

Black plate (302,1)

When replacing a wheel, make sure thenew one is the same as the original factorywheel in diameter, rim width, and offset.

Proper tire balancing provides the bestriding comfort and helps reduce treadwear. Out-of-balance tires can causevibration and uneven wear, such ascupping and flat spots.

8-38


Owner Maintenance


Form No.8W89-EA-06K

Black plate (303,1)

Light Bulbs

Luggage compartment light (Hatchback)

High-mount brake light (Sedan)

Headlights(High beam)

Headlights(Low beam)

Overhead light/ Map lights

Luggage compartment light

Sport Wagon

Taillights

Side-marker lights

License plate lights

Courtesy lights

Front turn signal lights

Parking lights

Reverse lights

Rear turn signal lights

Brake lights/Taillights

High-mount brake light

Fog lights

Sedan/5-Door

Taillights

Side-marker lights


Courtesy lights


Parking lights

Reverse lights



Trunk light

Fog lights

High-mount brake light (Hatchback)

Headlights(High beam)

(Low beam)Headlights

Map lightsOverhead light/


Owner Maintenance

8-39


Form No.8W89-EA-06K

Black plate (304,1)

WARNINGDo not replace the xenon fusion bulbsyourself:Replacing the xenon fusion bulbsyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Consult an AuthorizedMazda Dealer when the replacement isnecessary.

Handling Halogen Bulbs:When a halogen bulb breaks, it isdangerous. These bulbs containpressurized gas. If one is broken, itwill explode and serious injuries couldbe caused by the flying glass.If the glass portion is touched withbare hands, body oil could cause thebulb to overheat and explode when lit.Never touch the glass portion of thebulb with your bare hands and alwayswear eye protection when handling orworking around halogen bulbs.

Children and Halogen Bulbs:Playing with a halogen bulb isdangerous. Serious injuries could becaused by dropping a halogen bulb orbreaking it some other way.Always keep halogen bulbs out of thereach of children.

qReplacing Exterior Light Bulbs

Replacing the headlight, and parkinglight bulbs

Due to the complexity and difficulty ofthe procedure, the bulbs should bereplaced by an Authorized Mazda Dealer.

Fog lights

1. If you are changing the left fog lightbulb, start the engine, turn the steeringwheel all the way to the right, and turnoff the engine. If you are changing theright fog light bulb, turn the steeringwheel to the left.

2. Turn the screws counterclockwise andremove them.

3. Turn the center section of the plasticretainers counterclockwise and removethem, and partially peel back themudguard.

Removal

Installation

4. Turn the socket and bulb assemblycounterclockwise, and carefully pull itbackward.

8-40


Owner Maintenance


Form No.8W89-EA-06K

Black plate (305,1)

5. Disconnect the socket and bulbassembly from the electrical connectorby pressing the tab on the connectorwith your finger and pulling it.

NOTE

l If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used.

l To replace the bulb, contact anAuthorized Mazda Dealer.

l Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children.

6. Install the new socket and bulbassembly in the reverse order ofremoval.


1. Turn the socket and bulb assemblycounterclockwise and remove it.

2. Remove the bulb by pushing it inslightly and turning itcounterclockwise.

3. Install the new bulb in the reverse orderof removal.

Side-marker lights

1. If you are changing the left side-makerlight, start the engine, turn the steeringwheel all the way to the right, and turnoff the engine. If you are changing theright side-maker light, turn the steeringwheel to the left.

2. Turn the screws counterclockwise andremove them.


Owner Maintenance

8-41


Form No.8W89-EA-06K

Black plate (306,1)

3. Turn the center section of the plasticretainers counterclockwise and removethem, and partially peel back themudguard.

Removal

Installation


5. Disconnect the bulb from the socket.

Brake lights/Taillights, Rear turn signallights

(Sedan)

1. Pull the center section of the plasticretainer and remove the retainers andpartially open the trunk side trim.

Removal

Installation




8-42


Owner Maintenance


Form No.8W89-EA-06K

Black plate (307,1)



NOTE

To replace the bulb, contact anAuthorized Mazda Dealer.

(5-Door)


Left side Right side

2. Pull the strap and remove the cover.






Owner Maintenance

8-43


Form No.8W89-EA-06K

Black plate (308,1)


NOTE


(Sport Wagon)


Left side Right side

2. Pull the strap and remove the cover.



Rear turn signal lightsBrake lights/Taillights


NOTE


Reverse lights, Taillights

(Sedan)

1. Pull the center section of the plasticretainer and remove the retainers, thenremove the trunk rear trim.

Installation

Removal


8-44


Owner Maintenance


Form No.8W89-EA-06K

Black plate (309,1)


Reverse lightsTaillights


(5-Door/Sport Wagon)

1. Remove the cover.



Reverse lightsTaillights



(Sedan)

1. Remove the high-mount brake lightcomponent.

2. Detach the electrical connector fromthe socket.




(5-Door)

1. Remove the cover.





Owner Maintenance

8-45


Form No.8W89-EA-06K

Black plate (310,1)

(Sport Wagon)

1. Remove the liftgate upper trim andhigh-mount brake light component.





1. Wrap a flathead screwdriver with a softcloth to prevent damage to the lens andremove the lens by carefully prying onthe edge of the lens.

2. Disconnect the bulb by pulling it out.


qReplacing Interior Light Bulbs

Overhead light/Map lights (Withoverhead console)

1. Remove the screws.

2. Wrap a flathead screwdriver with a softcloth to prevent damage to the trim andgently insert it in the overhead light asshown in the figure, and then removethe overhead light unit.


8-46


Owner Maintenance


Form No.8W89-EA-06K

Black plate (311,1)



Overhead light/Map lights (Withoutoverhead console)

1. Wrap a flathead screwdriver with a softcloth to prevent damage to the trim andgently insert it in the overhead light asshown in the figure, and then removethe overhead light unit.




Courtesy lights, Vanity mirror lights,and Luggage compartment light

1. Wrap a small flathead screwdriver witha soft cloth to prevent damage to thelens and remove the lens by carefullyprying on the edge of the lens.


Edge

Courtesy lights


Owner Maintenance

8-47


Form No.8W89-EA-06K

Black plate (312,1)

Vanity mirror lights

Edge

(Type A)

Edge

Vanity mirror lights(Type B)

(5-Door)Luggage compartment light

Luggage compartment light(Sport Wagon)

Edge


Trunk light (Sedan)

1. Press both sides of the lens cap toremove it.



8-48


Owner Maintenance


Form No.8W89-EA-06K

Black plate (313,1)

FusesYour vehicle's electrical system isprotected by fuses.

If any lights, accessories, or controls don'twork, inspect the appropriate circuitprotector. If a fuse has blown, the insideelement will be melted.

If the same fuse blows again, avoid usingthat system and consult an AuthorizedMazda Dealer as soon as possible.

qFuse Replacement

Replacing the fuses on the driver's sidekick-panel

If the electrical system doesn't work, firstinspect fuses on the driver's side kick-panel.

1. Turn off the ignition switch and otherswitches.

2. Open the fuse panel cover by slidingthe cover straight back toward you.

CAUTIONPulling the cover off sideways maybreak the retaining tabs off.

3. Pull the fuse straight out with the fusepuller provided on the fuse blocklocated in the engine compartment.

4. Inspect it and replace if it's blown.

Normal Blown

5. Push in a new fuse of the sameamperage rating, and make sure it fitstightly. If it doesn't, have an AuthorizedMazda Dealer install it.If you have no spare fuses, borrow oneof the same rating from a circuit notessential to vehicle operation, such asthe AUDIO or CIGAR circuit.

WARNINGAlways replace a fuse with one of thesame rating. Otherwise you maydamage the electric system.


Owner Maintenance

8-49


Form No.8W89-EA-06K

Black plate (314,1)

Replacing the fuses under the hood

If the headlights or other electricalcomponents don't work and the fuses inthe cabin are OK, inspect the fuse blockunder the hood. If a fuse is blown, it mustbe replaced. Follow these steps:

1. Turn off the ignition switch and allother switches.

2. Remove the fuse block cover.

3. If a fuse is blown, replace it with a newone of the same amperage rating.

Normal Blown

NOTE

To replace the MAIN fuse, contact anAuthorized Mazda Dealer (page 8-51).

8-50


Owner Maintenance


Form No.8W89-EA-06K

Black plate (315,1)

qFuse Panel Description

Fuse block (Engine compartment)

DESCRIPTIONFUSE

RATINGPROTECTED COMPONENT

1 SPARE ― ―

2 SPARE ― ―

3 SPARE ― ―

4 M.DEF 7.5A Mirror defrosterí

5 ― ― ―

6 INJ 15A Injector

7 ENG BAR10A*1

Air flow sensor, EGR control valve15A*2

8―*1 ― ―

ENG BB*2 5A Cooling fan

9 HEAD LR 15A Headlight-low beam (Right)

10 HEAD LL 15A Headlight-low beam (Left)

11 HEAD HL 10A Headlight-high beam (Left)

12 HEAD HR 10A Headlight-high beam (Right)

13 ETC 7.5A Accelerator position sensor

14 HAZARD 10A Turn signal lights

15 STOP 20A Brake/Horn


Owner Maintenance

8-51íSome models.


Form No.8W89-EA-06K

Black plate (316,1)

DESCRIPTIONFUSE


16 TCM15A*1

TCM10A*2

17 ENG+B 7.5A PCM, TCM

18 FUEL PUMP 15A Fuel pump

19 IG KEY1 30A Engine control unit, Lighter

20 P.WIND 30A Power window

21 ― ― ―

22 DRL 20A DRL

23 ― ― ―

24 BLOWER 40A Blower motor

25 BTN 40A Overhead light, Power door lock

26 IG KEY2 40ARear wiper motorí, Heater control unit, Windshield wiper andwasher

27 DEFOG 40A Rear window defroster

28 ABS 60A ABSí

29AD FAN*1

30A Cooling fanFAN2*2

30FAN*1

30A Cooling fanFAN1*2

31 TAIL 10A Taillights, License plate lights, Parking lights

32 ILLUMI 10A Dashboard illumination

33 MAG 10A Magnet clutch

34 AUDIO 15A Audio system

35 P.SEAT 30A Power seatí

36 OPENER 7.5A Trunk opener motorí

37 ― ― ―

38―*1

― ―

IG1*2 15A CAT SSR

39 FOG 15A Fog lightsí

40 MAIN 120A For protection of all circuits

*1 2.3-liter engine*2 3.0-liter engine

8-52


íSome models.

Owner Maintenance


Form No.8W89-EA-06K

Black plate (317,1)

Fuse block (Driver's side kick-panel)

DESCRIPTIONFUSE


1 CIGAR 15 A Accessory socket

2 ENGINE IG 15 A Engine control system

3 A/C 10 A Heater

4 MIRROR 5 A Power control mirror

5 SAS 10 A ABS unit, SAS unit

6 SEAT 15 A Seat warmerí

7 METER ACC 5 A Audio light off unit

8 METER IG 15 A Instrument cluster

9 R.WIP 10 A Rear wiperí

10 D.LOCK 30 A Power door locks

11 R.CIGAR 15 A Accessory socket

12 WIPER 20 A Windshield wiper and washer

13 ROOM 15 A Overhead light

14 SPARE ― ―

15 SPARE ― ―

16 SPARE ― ―


Owner Maintenance

8-53íSome models.


Form No.8W89-EA-06K

Black plate (318,1)

How to MinimizeEnvironmental Paint Damage

The paintwork on your Mazda representsthe latest technical developments incomposition and methods of application.

Environmental hazards, however, canharm the paint's protective properties, ifproper care is not taken.

Here are some examples of possibledamage, with tips on how to preventthem.

qEtching Caused by Acid Rain orIndustrial Fallout

Occurrence

Industrial pollutants and vehicle emissionsdrift into the air and mix with rain or dewto form acids. These acids can settle on avehicle's finish. As the water evaporates,the acid becomes concentrated and candamage the finish.And the longer the acid remains on thesurface, the greater the chance is fordamage.

Prevention

It is necessary to wash and wax yourvehicle to preserve its finish according tothe instructions in this section. Thesesteps should be taken immediately afteryou suspect that acid rain has settled onyour vehicle's finish.

qDamage Caused by BirdDropping, Insects, or Tree Sap

Occurrence

Bird droppings contain acids. If thesearen't removed they can eat away the clearand color base coat of the vehicle'spaintwork.

When insects stick to the paint surfaceand decompose, corrosive compoundsform. These can erode the clear and colorbase coat of the vehicle's paintwork ifthey are not removed.

Tree sap will harden and adherepermanently to the paint finish. If youscratch the sap off while it is hard, somevehicle paint could come off with it.

Prevention

It is necessary to have your Mazdawashed and waxed to preserve its finishaccording to the instructions in thissection. This should be done as soon aspossible.

Bird droppings can be removed with asoft sponge and water. If you are travelingand these are not available, a moistenedtissue may also take care of the problem.The cleaned area should be waxedaccording to the instructions in thissection.Insects and tree sap are best removed witha soft sponge and water or a commerciallyavailable chemical cleaner.

Another method is to cover the affectedarea with dampened newspaper for one totwo hours. After removing the newspaper,rinse off the loosened debris with water.

8-54


Appearance Care


Form No.8W89-EA-06K

Black plate (319,1)

qWater Marks

Occurrence

Rain, fog, dew, and even tap water cancontain harmful minerals such as salt andlime. If moisture containing theseminerals settles on the vehicle andevaporates, the minerals will concentrateand harden to form white rings. The ringscan damage your vehicle's finish.

Prevention

It is necessary to wash and wax yourvehicle to preserve its finish according tothe instructions in this section. Thesesteps should be taken immediately afteryou find water marks on your vehicle'sfinish.

qPaint Chipping

Occurrence

Paint chipping occurs when gravel thrownin the air by another vehicle's tires hitsyour vehicle.

How to avoid paint chipping

Keeping a safe distance between you andthe vehicle ahead reduces the chances ofhaving your paint chipped by flyinggravel.

NOTE

l The paint chipping zone varies withthe speed of the vehicle. Forexample, when traveling at 90 km/h(56 mph), the paint chipping zone is50 m (164 ft).

l In low temperatures a vehicle's finishhardens. This increases the chance ofpaint chipping.

l Chipped paint can lead to rustforming on your Mazda. Before thishappens, repair the damage by usingMazda touch-up paint according tothe instructions in this section.Failure to repair the affected areacould lead to serious rusting andexpensive repairs.


Appearance Care

8-55


Form No.8W89-EA-06K

Black plate (320,1)

Exterior CareFollow all label and container directionswhen using a chemical cleaner or polish.Read all warnings and cautions.

qMaintaining the Finish

Washing

To help protect the finish from rust anddeterioration, wash your Mazdathoroughly and frequently, at least once amonth, with lukewarm or cold water.

If the vehicle is washed improperly, thepaint surface could be scratched. Here aresome examples of how scratching couldoccur.

Scratches occur on the paint surfacewhen:

l The vehicle is washed without firstrinsing off dirt and other foreignmatter.

l The vehicle is washed with a rough,dry, or dirty cloth.

l The vehicle is washed at a car washthat uses brushes that are dirty or toostiff.

l Cleansers or wax containing abrasivesare used.

NOTE

l Mazda is not responsible forscratches caused by automatic carwashes or improper washing.

l Scratches are more noticeable onvehicles with darker paint finishes.

To minimize scratches on the vehicle'spaint finish:

l Rinse off any dirt or other foreignmatter using lukewarm or cold waterbefore washing.

l Use plenty of lukewarm or cold waterand a soft cloth when washing thevehicle. Do not use a nylon cloth.

l Rub gently when washing or drying thevehicle.

l Take your vehicle only to a car washthat keeps its brushes well maintained.

l Don't use abrasive cleansers or waxthat contain abrasives.

CAUTIONl Don't use steel wool, abrasivecleaners, or strong detergentscontaining highly alkaline or causticagents on chrome-plated or anodizedaluminum parts. This may damagethe protective coating; also, cleanersand detergents may discolor ordeteriorate the paint.

l To prevent damaging the antenna,remove it before entering a car washfacility or passing beneath a lowoverhead clearance.

Pay special attention to removing salt,dirt, mud, and other foreign material fromthe underside of the fenders, and makesure the drain holes in the lower edges ofthe doors and rocker panels are clean.

8-56


Appearance Care


Form No.8W89-EA-06K

Black plate (321,1)

Insects, tar, tree sap, bird droppings,industrial fallout, and similar deposits candamage the finish if not removedimmediately. When prompt washing withplain water is ineffective, use a mild soapmade for use on vehicles.

Thoroughly rinse off all soap withlukewarm or cold water. Don't allow soapto dry on the finish.

After washing the vehicle, dry it with aclean chamois to prevent water spots fromforming.

WARNINGDriving with Wet Brakes:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.Dry the brakes by driving very slowlyand applying the brakes lightly untilbrake performance is normal.

Waxing

Your vehicle needs to be waxed whenwater no longer beads on the finish.Always wash and dry the vehicle beforewaxing it. In addition to the vehicle body,wax the metal trim to maintain its luster.

1. Use wax which contains no abrasives.Waxes containing abrasive will removepaint and could damage bright metalparts.

2. Use a good grade of natural wax formetallic, mica, and solid colors.

3. When waxing, coat evenly with thesponge supplied or a soft cloth.

4. Wipe off the wax with a soft cloth.

NOTE

A spot remover to remove oil, tar, andsimilar materials will usually also takeoff the wax. Rewax these areas even ifthe rest of the vehicle doesn't need it.

qRepairing Damage to the Finish

Deep scratches or chips on the finishshould be repaired promptly. Exposedmetal quickly rusts and can lead to majorrepairs.

CAUTIONIf your Mazda is damaged and needsmetal parts repaired or replaced, makesure the body shop applies anti-corrosion materials to all parts, bothrepaired and new. This will preventthem from rusting.

qBright-Metal Maintenance

l Use tar remover to remove road tar andinsects. Never do this with a knife orsimilar tool.

l To prevent corrosion on bright-metalsurfaces, apply wax or chromepreservative and rub it to a high luster.

l During cold weather or in coastal areas,cover bright-metal parts with a coatingof wax or preservative heavier thanusual. It would also help to coat themwith noncorrosive petroleum jelly orsome other protective compound.


Appearance Care

8-57


Form No.8W89-EA-06K

Black plate (322,1)

CAUTIONDon't use steel wool, abrasive cleaners,or strong detergents containing highlyalkaline or caustic agents on chrome-plated or anodized aluminum parts.This may result in damage to theprotective coating and causediscoloration or paint deterioration.

qUnderbody Maintenance

Road chemicals and salt used for ice andsnow removal and solvents used for dustcontrol may collect on the underbody. Ifnot removed, they will speed up rustingand deterioration of such underbody partsas fuel lines, frame, floor pan, and exhaustsystem, even though these parts may becoated with anti-corrosive material.

Thoroughly flush the underbody andwheel housings with lukewarm or coldwater at the end of each winter. Try alsoto do this every month.

Pay special attention to these areasbecause they easily hide mud and dirt. Itwill do more harm than good to wetdown the road grime without removingit.

The lower edges of doors, rocker panels,and frame members have drain holes thatshould not be clogged. Water trappedthere will cause rusting.

WARNINGDriving with Wet Brakes:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.Dry the brakes by driving very slowlyand applying the brakes lightly untilbrake performance is normal.

qAluminumWheel Maintenance

A protective coating is provided over thealuminum wheels. Special care is neededto protect this coating.

NOTE

l Don't use a wire brush or anyabrasive cleaner, polishingcompound, or solvent on aluminumwheels. They may damage thecoating.

l Only use a mild soap or neutraldetergent and always use a sponge orsoft cloth to clean the wheels.Rinse thoroughly with lukewarm orcold water. Also, be sure to clean thewheels after driving on dusty orsalted roads. This helps preventcorrosion.

l Avoid washing your vehicle in anautomatic car wash that uses high-speed or hard brushes.

l If your aluminum wheels lose luster,wax the wheels.

8-58


Appearance Care


Form No.8W89-EA-06K

Black plate (323,1)

Interior Care

qDashboard Precautions

Prevent caustic solutions such as perfumeand cosmetic oils from contacting thedashboard. They'll damage and discolor it.If these solutions get on the dashboard,wipe them off immediately.

CAUTIONDo not use glazing agents.Glazing agents contain ingredientswhich may cause discoloration,wrinkling, cracks and peeling.

qCleaning the Upholstery andInterior Trim

Vinyl

Remove dust and loose dirt from vinylwith a whisk broom or vacuum cleaner.Clean vinyl with a leather-and-vinylcleaner.

Leatherí

Real leather isn't uniform and may havescars, scratches, and wrinkles. Clean itwith a leather cleaner or mild soap.

Wipe it with a damp soft cloth; then dryand buff it with a dry soft cloth.

Fabricí

Remove dust and loose dirt from fabricwith a whisk broom or vacuum cleaner.Clean it with a mild soap solution goodfor upholstery and carpets. Remove freshspots immediately with a fabric spotcleaner.

To keep the fabric looking clean andfresh, take care of it. Otherwise its colorwill be affected, it can be stained easily,and its fire-resistance may be reduced.

CAUTIONUse only recommended cleaners andprocedures. Others may affectappearance and fire-resistance.

qCleaning the Lap/Shoulder BeltWebbing

Clean the webbing with a mild soapsolution recommended for upholstery orcarpets. Follow instructions. Don't bleachor dye the webbing; this may weaken it.

After cleaning the belts, thoroughly drythe belt webbing and make sure there isno remaining moisture before retractingthem.

WARNINGDamaged Seat Belt:Using damaged seat belts isdangerous. In a collision, damagedbelts cannot provide adequateprotection. Have an Authorized MazdaDealer replace damaged beltsimmediately.


Appearance Care

8-59íSome models.


Form No.8W89-EA-06K

Black plate (324,1)

qCleaning the Window Interiors

If the windows become covered with anoily, greasy, or waxy film, clean themwith glass cleaner. Follow the directionson the container.

CAUTIONDon't scrape or scratch the inside of therear window. You may damage the rearwindow defroster grid.

8-60


Appearance Care


Form No.8W89-EA-06K

Black plate (325,1)

9 Customer Information and ReportingSafety Defects

Important consumer information including warranties and add-on equipment.

Customer Assistance ............................... 9-2Customer Assistance (U.S.A.) ............ 9-2Customer Assistance (Canada) ........... 9-4Customer Assistance (Puerto Rico) .... 9-7Customer Assistance (Mexico) ........... 9-8

Mazda Importer/Distributors ............... 9-10Importer/Distributor .......................... 9-10Distributor in Each Area ................... 9-10

Warranty ................................................ 9-12Warranties for Your Mazda ............... 9-12Outside the United States .................. 9-13Outside Canada ................................. 9-14Registering Your Vehicle in A ForeignCountry (Except United States andCanada) ............................................. 9-15Add-On Non-Genuine Parts andAccessories ....................................... 9-16

Cell Phones ............................................. 9-17Cell Phones Warning ......................... 9-17

Type Approval of Equipment ............... 9-18Type Approval of Equipment ............ 9-18

Uniform Tire Quality Grading System(UTQGS) ................................................ 9-20

Uniform Tire Quality Grading System(UTQGS) .......................................... 9-20

Tire Information (U.S.A.) ..................... 9-22Tire Labeling ..................................... 9-22Location of the Tire Label(Placard) ............................................ 9-28Tire Maintenance .............................. 9-31Vehicle Loading ................................ 9-34Steps for Determining the Correct LoadLimit: ................................................ 9-41

Reporting Safety Defects ....................... 9-42Reporting Safety Defects (U.S.A.) .... 9-42Reporting Safety Defects (Canada) ... 9-43

Service Publications .............................. 9-44Service Publications .......................... 9-44

9-1


Form No.8W89-EA-06K

Black plate (326,1)

Customer Assistance (U.S.A.)Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:

qSTEP 1: Contact Your Mazda Dealer

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,SALES, SERVICE, or PARTS MANAGER, then please contact the GENERALMANAGER of the dealership or the OWNER.

qSTEP 2: Contact Mazda North American Operations

If for any reason you feel the need for further assistance after contacting your dealershipmanagement, you can reach Mazda North American Operations by one of the followingways.

Log on: at www.mazdaUSA.com

Answers to many questions, including how to locate or contact a local Mazda dealership inthe U.S., can be found here.

E-mail: click on “Contact Us” at the bottom of the page at www.mazdaUSA.com

By phone at: 1 (800) 222-5500

By letter at:Attn: Customer AssistanceMazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922P.O. Box 19734Irvine, CA 92623-9734

In order to serve you efficiently and effectively, please help us by providing the followinginformation:

1. Your name, address, and telephone number

2. Year and model of vehicle

9-2

Customer Information and Reporting Safety Defects

Customer Assistance


Form No.8W89-EA-06K

Black plate (327,1)

3. Vehicle Identification Number (17 digits, noted on your registration or title or located onthe upper driver's side corner of the dash)

4. Purchase date and current mileage

5. Your dealer's name and location

6. Your question(s)

If you live outside the U.S.A., please contact your nearest Mazda Distributor.


Customer Assistance

9-3


Form No.8W89-EA-06K

Black plate (328,1)

Customer Assistance (Canada)

qSatisfaction Review Process

Your complete and permanent satisfaction is of primary concern to Mazda. All AuthorizedMazda Dealers have both the knowledge and tools to keep your Mazda in top condition. Inour experience, any questions, problems, or complaints regarding the operation of yourMazda or any other general service transactions are most effectively resolved by yourdealer. If the cause of your dissatisfaction cannot adequately be addressed by normaldealership procedures, we recommend that you take the following steps:

qSTEP 1: Contact the Mazda Dealer

Discuss the matter with a member of dealership management. If the Service Manager hasalready reviewed your concerns, contact the owner of the dealership or its GeneralManager.

qSTEP 2: Contact the Mazda Regional Office

If you feel that you still require assistance, ask the dealer Service Manager to arrange foryou to meet the local Mazda Service Representative. If more expedient, contact MazdaCanada Inc.Regional Office nearest you for such arrangements. Regional Office addressand phone numbers are shown (page 9-6).

qSTEP 3: Contact the Mazda Customer Relations Department

If still not substantially satisfied, contact the Customer Relations Department, MazdaCanada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800)263-4680.Provide the Department with the following information:

1. Your name, address and telephone number


3. Vehicle Identification Number (VIN). Refer to the “Vehicle Identification Labels” pageof section 10 of this manual for the location of the VIN.

4. Purchase date

5. Present odometer reading


7. The nature of your problem and/or cause of dissatisfaction

The Department, in cooperation with the local Mazda Service Representative, will reviewthe case to determine if everything possible has been done to ensure your satisfaction.

9-4


Customer Assistance


Form No.8W89-EA-06K

Black plate (329,1)

Please recognize that the resolution of service problems in most cases requires the use ofyour Mazda dealer's service facilities, personnel and equipment. We urge you to follow theabove three steps in sequence for most effective results.

qMediation/Arbitration Program

Occasionally a customer concern cannot be resolved through Mazda's CustomerSatisfaction Program. If after exhausting the procedures in this manual your concern is stillnot resolved, you have another option.

Mazda Canada Inc. participates in an arbitration program administered by theCanadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you abouthow your concern may be reviewed and resolved by an independent third party throughbinding arbitration.

Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.Mazda's participation in CAMVAP makes a valuable contribution to our achieving thatgoal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as theaward is binding on both you and Mazda Canada Inc.

qCanadian Motor Vehicle Arbitration Plan (CAMVAP)

If a specific item of concern arises, where a solution cannot be reached between an owner,Mazda, and/or one of it's dealers (that all parties cannot agree upon), the owner may wishto use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).

CAMVAP uses the services of Provincial Administrators to assist consumers in schedulingand preparing for their arbitration hearings. However, before you can proceed withCAMVAP you must follow your Mazda dispute resolution process as outlined previously.


Customer Assistance

9-5


Form No.8W89-EA-06K

Black plate (330,1)

CAMVAP is fully implemented in all provinces and territories.Consumers wishing to obtain further information about the Program should contact theProvincial Administrator at 1 (800) 207-0685, or by contacting theCanadian Motor Vehicle Arbitration Plan Office at:

Canadian Motor Vehicle Arbitration Plan235 Yorkland Boulevard, suite 300North York, OntarioM2J 4Y8http://camvap.caProvincial Administrators may be reached locally as listed below:

Province/Territory CAMVAP Number

British Columbia & Yukon Territories 1 (800) 207-0685

Alberta & Northwest Territories 1 (800) 207-0685

Saskatchewan 1 (800) 207-0685

Manitoba 1 (800) 207-0685

Ontario 1 (800) 207-0685

Atlantic Canada 1 (800) 207-0685

Quebec 1 (800) 207-0685

qRegional Offices

REGIONAL OFFICES AREAS COVERED

MAZDA CANADA INC.WESTERN REGION

8171 ACKROYD ROADSUITE 2000

RICHMOND B.C.V6X 3K1

(604) 303-5670

ALBERTA,BRITISH COLUMBIA,

MANITOBA,SASKATCHEWAN,

YUKON

MAZDA CANADA INC.CENTRAL/ATLANTIC REGION

55 VOGELL ROAD,RICHMOND HILL,ONTARIO, L4B 3K5

(905) 787-7000

ONTARIO

MAZDA CANADA INC.QUEBEC REGION

6111 ROUTE TRANSCANADIENNE

POINTE CLAIRE, QUEBECH9R 5A5

(514) 694-6390

QUEBEC,NEW BRUNSWICK,NOVA SCOTIA,

PRINCE EDWARD ISLAND,NEWFOUNDLAND

9-6


Customer Assistance


Form No.8W89-EA-06K

Black plate (331,1)

Customer Assistance (Puerto Rico)Your complete and permanent satisfaction is our business. That is why all AuthorizedMazda Dealers have the knowledge and the tools to keep your Mazda vehicle in topcondition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:

qSTEP 1

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,SALES, SERVICE, or PARTS MANAGER, then please contact the GENERALMANAGER of the dealership or the OWNER.

qSTEP 2

If, after following STEP 1, you feel the need for further assistance, please contact yourarea's Mazda representative (Indicated on the next page).

Please help us by providing the following information:






6. Your question(s)


Customer Assistance

9-7


Form No.8W89-EA-06K

Black plate (332,1)

Customer Assistance (Mexico)Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:

qSTEP 1: Contact Your Mazda Dealer

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue.

l If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER ofthe dealership or the OWNER.

l If it becomes necessary to have the components or wiring system for the supplementaryrestraint system modified to accommodate a person with certain medical conditions inaccordance with a certified physician, go to STEP2.

qSTEP 2: Contact Mazda Motor de Mexico

If for any reason you feel the need for further assistance after contacting your dealershipmanagement and it becomes necessary to have the components or wiring system for thesupplementary restraint system modified to accommodate a person with certain medicalconditions in accordance with a certified physician, you can reach Mazda Motor de Mexicoby one of the following ways.

Log on: at www.MazdaMexico.com.mx

Answers to many questions, including how to locate or contact a local Mazda dealership inMexico, can be found here.

E-mail: click on “Contactanos” at the top of the page at www.MazdaMexico.com.mx

By phone at: 1 (866) 315 0220

9-8


Customer Assistance


Form No.8W89-EA-06K

Black plate (333,1)

By letter at:Attn: Customer AssistanceMazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922P.O. Box 19734Irvine, CA 92623-9734

In order to serve you efficiently and effectively, please help us by providing the followinginformation:






6. Your question(s)


Customer Assistance

9-9


Form No.8W89-EA-06K

Black plate (334,1)

Importer/Distributor

qU.S.A.

Mazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922 U.S.A.P.O. Box 19734Irvine, CA 92623-9734 U.S.A.TEL: 1 (800) 222-5500 (in U.S.A.)(949) 727-1990 (outside U.S.A.)

Distributor in Each Area

qCANADA

Mazda Canada Inc.55 Vogell Road, Richmond Hill,Ontario, L4B 3K5 CanadaTEL: 1 (800) 263-4680 (in Canada)(905) 787-7000 (outside Canada)

qPUERTO RICO/U.S. Virgin Island

Plaza Motors Corp. (Mazda de PuertoRico)P.O. Box 362722, San Juan, Puerto Rico00936-2722TEL: (787) 641-9300

qMEXICO

Mazda Motor de MexicoCircuito Guillermo Gonzalez Camarena N1500 Col. Centro de Ciudad Santa Fe.01210, Mexico, D.F.TEL: Center of Attention to Clients:01 (800) 016 2932. in Mexico

qGUAM

Triple J Motors157 South Marine Drive, Tamuning,GUAM 96911 USAP.O. Box 6066 Tamuning, Guam 96931TEL: (671) 649-6555

qSAIPAN

Pacific International Marianas, Inc.(d.b.a. Midway Motors)P.O. Box 887 Saipan, MP 96950TEL: (670) 234-7524

9-10


Mazda Importer/Distributors


Form No.8W89-EA-06K

Black plate (335,1)

Triple J Saipan, Inc.(d.b.a. Triple J Motors)P.O. Box 500487 Saipan, MP 96950-0487TEL: (670) 234-7133/3051

qAMERICAN SAMOA

Polynesia Motors, Inc.P.O. Box 1120, Pago Pago, AmericanSamoa 96799TEL: (684) 699-9347


Mazda Importer/Distributors

9-11


Form No.8W89-EA-06K

Black plate (336,1)

Warranties for Your Mazdal New Vehicle Limited Warranty

l Distributor Major Component Limited Warranty (Canada only)

l Safety Restraint System Limited Warranty

l Anti-perforation Limited Warranty

l Federal Emission Control Warranty (U.S.A. only)

l Emission Defect Warrantyl Emission Performance Warranty

l California Emission Control Warranty (U.S.A. only)

l Emission Control Warranty (Canada only)

l Replacement Parts and Accessories Limited Warranty

l Tire Warranty

NOTE

Detailed warranty information is provided with your Mazda.

9-12


Warranty


Form No.8W89-EA-06K

Black plate (337,1)

Outside the United StatesGovernment regulations in the United States require that automobiles meet specificemission regulations and safety standards. Therefore, vehicles built for use in the UnitedStates may differ from those sold in other countries.

The differences may make it difficult or even impossible for your vehicle to receivesatisfactory servicing in other countries. We strongly recommend that you NOT take yourMazda outside the United States. However, in the event that you are moving to Canadapermanently, Mazda vehicles built for use in the United States could be eligible forexportation to Canada with specific vehicle modifications to comply with the CanadianMotor Vehicle Safety requirements (CMVSS).

NOTE

The above is applicable for a permanent import/export situation and not related totravelers on vacation.

You may have the following problems if you do take your vehicle outside of the UnitedStates:

l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel willaffect vehicle performance and damage the emission controls and engine.

l Proper repair facilities, tools, testing equipment, and replacement parts may not beavailable.

Please refer to your Manufacturer's Warranty Booklet for more information.


Warranty

9-13


Form No.8W89-EA-06K

Black plate (338,1)

Outside CanadaGovernment regulations in Canada require that automobiles meet specific emissionregulations and safety regulations. Therefore, vehicles built for use in Canada may differfrom those sold in other countries.

The differences may make it difficult or even impossible for your vehicle to receivesatisfactory servicing in other countries. We strongly recommend that you NOT take yourMazda outside Canada. However, in the event that you are moving to the United Statespermanently, Mazda vehicles built for use in Canada could be eligible for exportation to theUnited States with specific vehicle modifications to comply with the United States FederalMotor Vehicle Safety Standards (FMVSS).

NOTE

The above is applicable for a permanent import/export situation and not related totravelers on vacation.

You may have the following problems if you do take your vehicle outside of Canada:

l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel willaffect vehicle performance and damage the emission controls and engine.

l Proper repair facilities, tools, testing equipment, and replacement parts may not beavailable.

Please refer to your Manufacturer's Warranty Booklet for more information.

9-14


Warranty


Form No.8W89-EA-06K

Black plate (339,1)

Registering Your Vehicle in A Foreign Country (ExceptUnited States and Canada)

Government regulations in your country could require that automobiles meet specificemission and safety standards.Vehicles built for your country may differ from those built for other countries. In additionto registration problems, satisfactory service may be difficult or even impossible in anothercountry.

The fuel specified for your vehicle may be unavailable.

Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may beunavailable.

There might not be an Authorized Mazda Dealer in the country you plan to take yourvehicle.

The Mazda warranty is valid only in certain countries.


Warranty

9-15


Form No.8W89-EA-06K

Black plate (340,1)

Add-On Non-Genuine Parts and AccessoriesNon-genuine parts and accessories for Mazda vehicles can be found in stores.These may fit your vehicle, but they are not approved by Mazda for use with Mazdavehicles. When you install non-genuine parts or accessories, they could affect yourvehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before youinstall any non-genuine parts or accessories, consult an Authorized Mazda Dealer.

WARNINGInstallation of Non-Genuine Parts or Accessories:Installation of non-genuine parts or accessories is dangerous. Improperly designedparts or accessories could seriously affect your vehicle's performance or safetysystems. This could cause you to have an accident or increase your chances of injuriesin an accident. Always consult an Authorized Mazda Dealer before you install non-genuine parts or accessories.

Add-On Electrical and Electronic Equipment:Incorrectly choosing or installing improper add-on equipment or choosing animproper installer is dangerous. Essential systems could be damaged, causing enginestalling, air-bag (SRS) activation, ABS inactivation, or a fire in the vehicle.Be very careful in choosing and installing add-on electrical equipment, such as mobiletelephones, two-way radios, stereo systems, and car alarm systems.

Mazda assumes no responsibility for death, injury, or expenses that may result from theinstallation of add-on non-genuine parts or accessories.

9-16


Warranty


Form No.8W89-EA-06K

Black plate (341,1)

Cell Phones Warning

WARNINGUse of Cell Phones and Other Devices by Driver:Use of any electrical devices such as cell phones, computers, portable radios, vehiclenavigation or other devices by the driver while the vehicle is moving is dangerous.Dialing a number on a cell phone while driving also ties-up the driver's hands. Use ofthese devices will cause the driver to be distracted and could lead to a serious accident.If a passenger is unable to use the device, pull off the right-of-way to a safe areabefore use. If use of a cell phone is necessary despite this warning, use a hands-freesystem to at least leave the hands free to drive the vehicle. Never use a cell phone orother electrical devices while the vehicle is moving and, instead, concentrate on thefull-time job of driving.Please comply with the legal regulations concerning the use of communicationequipment in vehicles in your country.


Cell Phones

9-17


Form No.8W89-EA-06K

Black plate (342,1)

Type Approval of Equipment

Immobilizer system

9-18




Form No.8W89-EA-06K

Black plate (343,1)

Keyless entry system



9-19


Form No.8W89-EA-06K

Black plate (344,1)

Uniform Tire Quality Grading System (UTQGS)This information relates to the tire grading system developed by the U.S. NationalHighway Traffic Safety Administration for grading tires by tread wear, traction, andtemperature performance.

qTread Wear

The tread wear grade is a comparative rating based on the wear rate of the tire when testedunder controlled conditions on a specified government test course.For example, a tire graded 150 would wear one-and-a-half times as well on the governmentcourse as a tire graded 100.

The relative performance of tires depends upon the actual conditions of their use, however,and may depart significantly from the norm because of variations in driving habits, servicepractices and differences in road characteristics and climate.

qTraction-AA, A, B, C

The traction grades, from highest to lowest, are AA, A, B, and C. These grades representthe tire's ability to stop on wet pavement as measured under controlled conditions onspecified government test surfaces of asphalt and concrete. A tire marked C may have poortraction performance.

WARNINGThe traction grade assigned to this tire is based on braking (straight ahead) tractiontests and does not include acceleration cornering (turning), hydroplaning, or peaktraction characteristics.

qTemperature-A, B, C

The temperature grades A (the highest), B, and C, represent the tire's resistance to thegeneration of heat and its ability to dissipate heat when tested under controlled conditionson a specified indoor laboratory test wheel.Sustained high temperature can cause the material of the tire to degenerate and reduce tirelife, and excessive temperatures can lead to sudden tire failure.

Grade C corresponds to a level of performance which all passenger vehicle tires must meetunder the Federal Motor Vehicle Safety Standard No. 109. Grades B and A representhigher levels of performance on the laboratory test wheel than the minimum required bylaw.

9-20


Uniform Tire Quality Grading System (UTQGS)


Form No.8W89-EA-06K

Black plate (345,1)

WARNINGThe temperature grade for this tire is established for a tire that is properly inflated andnot overloaded. Excessive speed, underinflation, or excessive loading, eitherseparately or in combination, can cause heat buildup and possible tire failure.

These grades will be added to the sidewalls of passenger vehicle tires over the next severalyears according to a schedule established by the NHTSA and the tire manufacturers.

The grade of tires available as standard or optional equipment on Mazda vehicles may varywith respect to grade.

ALL PASSENGERVEHICLE TIRES MUST CONFORM TO THESE GRADES ANDTO ALL OTHER FEDERALTIRE-SAFETY REQUIREMENTS.

qUniform Tire Quality Grading

Quality grades can be found where applicable on the tire sidewall between tread shoulderand maximum section width.For example:Treadwear 200 Traction AATemperature A

TREADWEAR 200 TRACTION AA TEMPERATURE A

UTQGS MARK (example)


Uniform Tire Quality Grading System (UTQGS)

9-21


Form No.8W89-EA-06K

Black plate (346,1)

Tire LabelingFederal law requires tire manufacturers to place standardized information on the sidewall ofall tires. This information identifies and describes the fundamental characteristics of the tireand also provides a tire identification number for safety standard certification and in case ofa recall.

qInformation on Passenger Vehicle Tires

Please refer to the diagram below.

1. TIN: U.S. DOT tire identification number

2. Passenger car tire

3. Nominal width of tire in millimeters

4. Ratio of height to width (aspect ratio)

5. Radial

6. Rim diameter code

7. Load index & speed symbol

8. Severe snow conditions

9. Tire ply composition and materials used

10. Max. load rating

9-22


Tire Information (U.S.A.)


Form No.8W89-EA-06K

Black plate (347,1)

11. Tread wear, traction and temperature grades

12. Max. permissible inflation pressure

13. SAFETY WARNING

P215/65R15 95H is an example of a tire size and load index rating. Here is an explanationof the various components of that tire size and load index rating. Note that the tire size andload index rating may be different from the example.

P

Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designatedby the Tire and Rim Association (T&RA).

NOTE

If your tire size does not begin with a letter this may mean it is designated by eitherETRTO (European Tire and Rim Technical Organization) or JATMA (Japan TireManufacturing Association).

215

“215” is the nominal width of the tire in millimeters. This three-digit number gives thewidth in millimeters of the tire from sidewall edge to sidewall edge. In general, the largerthe number, the wider the tire.

65

“65” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.

R

“R” is the tire construction symbol. R indicates “Radial ply construction”.

15

“15” is the wheel rim diameter in inches.

95

“95” is the Load Index. This two-or three-digit number indicates how much weight eachtire can support.



9-23


Form No.8W89-EA-06K

Black plate (348,1)

H

“H” is the speed rating. The speed rating denotes the maximum speed for which the use ofthe tire is rated.

Letter Rating Speed Rating

Q 99 mph

R 106 mph

S 112 mph

T 118 mph

U 124 mph

H 130 mph

V 149 mph

W 168* mph

Y 186* mph

* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. Fortires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.

M+S or M/S: Mud and Snow

AT: All Terrain.AS: All Season. The “M+S” or “M/S” indicates that the tire has some functional use inmud and snow.

U.S. DOT Tire Identification Number (TIN)

This begins with the letters “DOT” which indicates the tire meets all federal standards. Thenext two numbers or letters are the plant code where it was manufactured, and the last fournumbers represent the week and year the tire was manufactured. For example, the numbers457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example,the number 2102 means the 21th week of 2002. The other numbers are marketing codesused at the manufacturer's discretion. This information is used to contact consumers if a tiredefect requires a recall.

Tire Ply Composition and Materials Used

The number of plies indicates the number of layers of rubber-coated fabric in the tire. Ingeneral, the greater the number of plies, the more weight a tire can support. Tiremanufacturers also must indicate the tire materials, which include steel, nylon, polyester,and other.

Maximum Load Rating

This number indicates the maximum load in kilograms and pounds that can be carried bythe tire.

Maximum Permissible Inflation Pressure

This number is the greatest amount of air pressure that should ever be put in the tire undernormal driving conditions.

9-24




Form No.8W89-EA-06K

Black plate (349,1)

Tread Wear, Traction and Temperature Grades

Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tirewhen tested under controlled conditions on a specified government test course. Forexample, a tire graded 150 would wear one and one-half (1 1/2) times as well on thegovernment course as a tire graded 100.Traction: The traction grades, from highest to lowest are AA, A, B, and C. The gradesrepresent the tire's ability to stop on wet pavement as measured under controlled conditionson specified government test surfaces of asphalt and concrete. A tire marked C may havepoor traction performance.Temperature: The temperature grades are A (the highest), B and C, representing the tire'sresistance to the generation of heat and its ability to dissipate heat when tested undercontrolled conditions on a specified indoor laboratory test wheel.

Snow Tires

In some heavy snow areas, local governments may require true snow tires, those with verydeeply cut tread. These tires should only be used in pairs or placed on all four wheels.Make sure you purchase snow tires that are the same size and construction type as the othertires on your vehicle.

SAFETYWARNING

The following safety warning appears on the tire's sidewall.SERIOUS INJURY MAY RESULT FROM:

l EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTING-MATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNTTIRES.

l TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGE-FOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLYCHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.



9-25


Form No.8W89-EA-06K

Black plate (350,1)

qInformation on Temporary Tires

Please refer to the diagram below.

1. Temporary tires

2. Nominal width of tire in millimeters

3. Ratio of height to width (aspect ratio)

4. Diagonal

5. Rim diameter code

6. Load index&speed symbol

T115/70D 16 90M is an example of a tire size and load index rating. Here is an explanationof the various components of that tire size and load index rating. Note that the tire size andload index rating may be different from the example.

T

Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designatedby the Tire and Rim Association (T&RA).

115

“115” is the nominal width of the tire in millimeters. This three-digit number gives thewidth in millimeters of the tire from sidewall edge to sidewall edge. In general, the largerthe number, the wider the tire.

9-26




Form No.8W89-EA-06K

Black plate (351,1)

70

“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.

D

“D” is the tire construction symbol. D indicates “diagonal ply construction”.

16

“16” is the wheel rim diameter in inches.

90

“90” is the Load Index. This two-or three-digit number indicates how much weight eachtire can support.

M

“M” is the speed rating. The speed rating denotes the maximum speed for which the use ofthe tire is rated.

Letter Rating Speed Rating

M 81 mph



9-27


Form No.8W89-EA-06K

Black plate (352,1)

Location of the Tire Label (Placard)You will find the tire label containing tire inflation pressure by tire size and other importantinformation on the driver's side B-pillar or on the edge of the driver's door frame.

SAMPLE

qRecommended Tire Inflation Pressure

On the tire label you will find the recommended tire inflation pressure in both kPa and psifor the tires installed as original equipment on the vehicle. It is very important that theinflation pressure of the tires on your vehicle is maintained at the recommended pressure.You should check the tire pressure regularly to insure that the proper inflation pressure ismaintained.Refer to Tires on page 10-8.

NOTE

Tire pressures listed on the vehicle placard or tire information label indicate therecommended cold tire inflation pressure, measured when the tires are cold, after thevehicle has been parked for at least 3 hours. As you drive, the temperature in the tirewarms up, increasing the tire pressure.

9-28




Form No.8W89-EA-06K

Black plate (353,1)

WARNINGTire Under-Inflation:Driving your vehicle with under-inflated tires is dangerous.Under-inflation is the most common cause of failures in any kind of tire and mayresult in severe cracking, tread separation or “blowout”, with unexpected loss ofvehicle control and increased risk of injury. Under-inflation increases sidewall flexingand rolling resistance, resulting in heat buildup and internal damage to the tire. Itresults in unnecessary tire stress, irregular wear, loss of control and accidents. A tirecan lose up to half of its air pressure and not appear to be flat!It is impossible to determine whether or not tires are properly inflated just by lookingat them.Always check the tire inflation pressures on a regular basis according to therecommended tire inflation pressure on the tire label and in conjunction with theinformation in this owner's manual.

qChecking Tire Pressure

1. When you check the air pressure, make sure the tires are cold ―meaning they are nothot from driving even a mile.

2. Remove the cap from the valve on one tire.

3. Firmly press a tire gauge onto the valve.

4. Add air to achieve recommended air pressure.

5. If you overfill the tire, release air by pushing on the metal stem in the center of thevalve. Then recheck the pressure with your tire gauge.

6. Replace the valve cap.

7. Repeat with each tire, including the spare.

NOTE

Some spare tires require higher inflation pressure.

8. Visually inspect the tires to make sure there are no nails or other objects embedded thatcould poke a hole in the tire and cause an air leak.

9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or otherirregularities.



9-29


Form No.8W89-EA-06K

Black plate (354,1)

NOTE

Warm tires normally exceed recommended pressures. Don't release air from warm tiresto adjust the pressure.Under-inflation can cause serious failures and accidents.Over-inflation can produce a harsh ride and the greater possibility of damage from roadhazards.

qGlossary of Terms

Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, andthe maximum weight the vehicle can carry.Tire Identification Number (TIN): A number on the sidewall of each tire providinginformation about the tire brand and manufacturing plant, tire size, and date ofmanufacture.Inflation Pressure: A measure of the amount of air in a tire.kPa: Kilopascal, the metric unit for air pressure.psi: Pounds per square inch, the English unit for air pressure.B-pillar: The structural member at the side of the vehicle behind the front door.Original Equipment (OE): Describes components originally equipped on the vehicle.Vehicle Load Limit: The maximum value of the combination weight of occupants andcargo.Bead Area of the Tire: Area of the tire next to the rim.Sidewall Area of the Tire: Area between the bead area and the tread.Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it'smounted on the vehicle.

Seating capacity means the total allowable number of vehicle occupants. Seating capacityis described on the tire label.

Production options weight is the combination weight of installed regular productionoptions weighing over 2.3 kilograms in excess of the standard items which they replace,and not previously considered in the curb weight or accessory weight, including heavyduty brakes, ride levelers, roof rack, heavy duty battery, and special trim.

Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tirebeads are seated.

9-30




Form No.8W89-EA-06K

Black plate (355,1)

Tire MaintenanceImproper or inadequate vehicle maintenance can cause tires to wear abnormally. Here aresome important maintenance points:

qTire Inflation Pressure

Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintainrecommended pressures for the best ride, top handling, and minimum tire wear. Use thepressures specified on the vehicle tire information placard or tire label for optimum service.

qTire Rotation

To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregularwear develops. During rotation, inspect them for correct balance.

Forward

Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or acombination of the following:

l Incorrect tire pressure

l Improper wheel alignment

l Out-of-balance wheel

l Severe braking

After rotation, inflate all tire pressures to specification (page 10-8) and inspect the lug nutsfor tightness.



9-31


Form No.8W89-EA-06K

Black plate (356,1)

CAUTIONRotate unidirectional tires and radial tires that have an asymmetrical tread pattern orstuds only from front to rear, not from side to side. Tire performance will be weakened ifrotated from side to side.

(With limited-slip differential)Don't use the following:

l Tires not of the designated size

l Tires of different sizes or types at the same time

l Tires not sufficiently inflated

If these instructions aren't followed, the rotation of the left and right wheels will bedifferent and will thus apply a constant load on the limited-slip differential.This will cause a malfunction.

qReplacing a Tire

WARNINGWorn Tires:Driving with worn tires is dangerous. Reduced braking, steering, and traction couldresult in an accident. Always use tires that are in good condition.

If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replacethe tire when this happens.

New tread

Tread wear indicator

Worn tread

You should replace it before the band is across the entire tread.

9-32




Form No.8W89-EA-06K

Black plate (357,1)

NOTE

Tires degrade over time, even when they are not being used on the road. It isrecommended that tires generally be replaced when they are 6 years or older. Heatcaused by hot climates or frequent high loading conditions can accelerate the agingprocess. You should replace the spare tire when you replace the other road tires due tothe aging of the spare tire. Regarding the manufacturing week and year is indicated with4 digit. Refer to The tire labeling on page 9-22.

qSafety Practices

The way you drive has a great deal to do with your tire mileage and safety. So cultivategood driving habits for your own benefit.

l Observe posted speed limits

l Avoid fast starts, stops and turns

l Avoid potholes and objects on the road

l Do no run over curbs or hit the tire against the curb when parking

CAUTIONIf you feel a sudden vibration or ride disturbance while driving or you suspect your tireor vehicle has been damaged, immediately reduce your speed. Drive with caution untilyou can safely pull off the road. Stop and inspect the tire for damage. If the tire is under-inflated or damaged, deflate it, remove the tire and rim and replace it with your sparetire. If you cannot detect a cause, have the vehicle towed to the nearest vehicle or tiredealer to have the vehicle inspected.



9-33


Form No.8W89-EA-06K

Black plate (358,1)

Vehicle Loading

NOTE

This vehicle is not designed to tow a trailer.

This section will guide you in the proper loading of your vehicle and/or trailer, to keepyour loaded vehicle weight within its design rating capability, with or without a trailer.Properly loading your vehicle will provide maximum return of vehicle design performance.Before loading your vehicle, familiarize yourself with the following terms for determiningyour vehicle's weight ratings, with or without a trailer, from the vehicle's SafetyCertification Label and Tire and Load Information Label:

WARNINGOverloaded Vehicle:Overloading a vehicle is dangerous. The results of overloading can have seriousconsequences in terms of passenger safety. Too much weight on a vehicle's suspensionsystem can cause spring or shock absorber failure, brake failure, handling or steeringproblems, irregular tire wear, tire failure or other damage.Overloading makes a vehicle harder to drive and control. It also increases the distancerequired for stopping. In cases of serious overloading, brakes can fail completely,particularly on steep grades. The load a tire will carry safely is a combination of thesize of the tire, its load range, and corresponding inflation pressure.Never overload the vehicle and always observe the vehicle's weight ratings from thevehicle's Safety Certification and Tire and Load Information labels.

9-34




Form No.8W89-EA-06K

Black plate (359,1)

Base Curb Weight is the weight of the vehicle including a full tank of fuel and allstandard equipment. It does not include passengers, cargo, or optional equipment.

Vehicle Curb Weight is the weight of your new vehicle when you picked it up from yourdealer plus any aftermarket equipment.

PAYLOAD

Payload is the combination weight of cargo and passengers that the vehicle is designed tocarry. The maximum payload for your vehicle can be found on the Tire and LoadInformation label on the driver's door frame or door pillar. Look for “THECOMBINATION WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVEREXCEED XXX kg or XXX lbs” for your maximum payload. The payload listed on the tirelabel is the maximum payload for the vehicle as built by the assembly plant. If anyaftermarket or dealer installed equipment has been installed on the vehicle, the weight ofthe equipment must be subtracted from the payload listed on the tire label in order to beaccurate.



9-35


Form No.8W89-EA-06K

Black plate (360,1)

SAMPLE

CARGO

Cargo Weight includes all weight added to the Base Curb Weight, including cargo andoptional equipment. When towing, trailer tongue load or king pin weight is also part ofcargo weight.

The cargo weight limit decreases depending on the number of vehicle occupants. The cargoweight limit can be calculated by subtracting the total weight of the vehicle occupants fromthe “combination weight of occupants and cargo should never exceed” value on the tirelabel.

9-36




Form No.8W89-EA-06K

Black plate (361,1)

Examples: Based on a single occupant weight of 68 kg, and a value of 385 kg for the“combination weight of occupants and cargo should never exceed”:The cargo weight limit with one occupant is 385 kg _ 68 kg = 317 kgThe cargo weight limit with two occupants is 385 kg _ (68 × 2) kg = 249 kgIf the weight of the occupant increases, the cargo weight limit decreases by that much.

GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) -including vehicle curb weight and all payload.

GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carriedby a single axle (front or rear). These numbers are shown on the Safety ComplianceCertification Label located on the driver's door frame or door pillar. The total load oneach axle must never exceed its GAWR.

GVW

GVW (Gross Vehicle Weight) is the Vehicle Curb Weight + cargo + passengers.

GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fullyloaded vehicle (including all options, equipment, passengers and cargo). The GVWR isshown on the Safety Compliance Certification Label located on the driver's doorframe or door pillar. The GVW must never exceed the GVWR.



9-37


Form No.8W89-EA-06K

Black plate (362,1)

SAMPLE

WARNINGExceeding Axle Weight Rating Limits:Exceeding the Safety Certification Label axle weight rating limits is dangerous andcould result in death or serious injury as a result of substandard vehicle handling,performance, engine, transmission and/or structural damage, serious damage to thevehicle, or loss of control.Always keep the vehicle within the axle weight rating limits.

9-38




Form No.8W89-EA-06K

Black plate (363,1)

GCW

GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW) plus theweight of the fully loaded trailer.

GCWR (Gross Combination Weight Rating) is the maximum allowable weight of thevehicle and the loaded trailer - including all cargo and passengers - that the vehicle canhandle without risking damage. (Important: The towing vehicle's braking system is ratedfor operation at GVWR, not at GCWR. Separate functional brakes should be used for safecontrol of towed vehicles and for trailers weighing more than 1,500 lbs). The GCW mustnever exceed the GCWR.

Maximum Loaded Trailer Weight is the highest possible weight of a fully loaded trailerthe vehicle can tow. It assumes a vehicle with only mandatory options, no cargo (internal orexternal), a tongue load of 10_15% (conventional trailer) or king pin weight of 15_25%(fifth-wheel trailer), and driver only (150 lbs). Consult your dealership (or the RVandTrailer Towing Guide provided by your dealership) for more detailed information.Tongue Load or Fifth-Wheel King Pin Weight refers to the amount of the weight that atrailer pushes down on a trailer hitch.

Examples: For a 5000 lb conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain aproper tongue load range of 500 to 750 lbs. For an 11,500 lb fifth-wheel trailer, multiply by0.15 and 0.25 to obtain a proper king pin load range of 1,725 to 2,875 lbs.



9-39


Form No.8W89-EA-06K

Black plate (364,1)

WARNINGExceeding GVWR or GAWR Specifications:Exceeding the GVWR or the GAWR specified on the certification label is dangerous.Exceeding any vehicle rating limitation could result in a serious accident, injury, ordamage to the vehicle.Do not use replacement tires with lower load carrying capacities than the originalsbecause they may lower the vehicle's GVWR and GAWR limitations. Replacementtires with a higher limit than the originals do not increase the GVWR and GAWRlimitations.Never exceed the GVWR or the GAWR specified on the certification label.

9-40




Form No.8W89-EA-06K

Black plate (365,1)

Steps for Determining the Correct Load Limit:

Steps for Determining Correct Load Limit:

(1) Locate the statement “The combined weight of occupants and cargo shouldnever exceed XXX kg or XXX lbs” on your vehicle's placard.

(2) Determine the combined weight of the driver and passengers that will beriding in your vehicle.

(3) Subtract the combined weight of the driver and passengers from XXX kgor XXX lbs.

(4) The resulting figure equals the available amount of cargo and luggage loadcapacity. For example, if the “XXX” amount equals 1400 lbs. and therewill be five 150 lb passengers in your vehicle, the amount of availablecargo and luggage load capacity is 650 lbs. (1400_ 750 (5 × 150) = 650lbs.)

(5) Determine the combined weight of luggage and cargo being loaded on thevehicle. That weight may not safely exceed the available cargo and luggageload capacity calculated in Step 4.

(6) If your vehicle will be towing a trailer, the load from your trailer will betransferred to your vehicle. Consult this manual to determine how thisreduces the available cargo and luggage load capacity of your vehicle.



9-41


Form No.8W89-EA-06K

Black plate (366,1)

Reporting Safety Defects (U.S.A.)

If you believe that your vehicle has a defect which could cause a crash or couldcause injury or death, you should immediately inform the National HighwayTraffic Safety Administration (NHTSA) in addition to notifying Mazda MotorCorporation (Your Mazda Importer/Distributor).

If NHTSA receives similar complaints, it may open an investigation, and if itfinds that a safety defect exists in a group of vehicles, it may order a recall andremedy campaign. However, NHTSA cannot become involved in individualproblems between you, your dealer, or Mazda Motor Corporation (Your MazdaImporter/Distributor).

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153) ; go to http://www.safercar.gov; or write to:Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. Youcan also obtain other information about motor vehicle safety from http://www.safercar.gov.

NOTE

If you live in the U.S.A., all correspondence to Mazda Motor Corporation should beforwarded to:

Mazda North American Operations7755 Irvine Center DriveIrvine, California 92618-2922P.O. Box 19734Irvine, CA 92623-9734Customer Assistance Center or toll free at 1 (800) 222-5500

If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown(page 9-10) in this booklet.

9-42


Reporting Safety Defects


Form No.8W89-EA-06K

Black plate (367,1)

Reporting Safety Defects (Canada)Canadian customers who wish to report a safety-related defect to Transport Canada, DefectInvestigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contactTransport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330Sparks Street, Ottawa ON K1A 0N5.

For additional road safety information, please visit the Road Safety website at:http://www.tc.gc.ca/roadsafety/menu.htm


Reporting Safety Defects

9-43


Form No.8W89-EA-06K

Black plate (368,1)

Service PublicationsFactory-authorized Mazda service publications are available for owners who wish to dosome of their own maintenance and repair.

When requesting any of our publications through an Authorized Mazda Dealer, refer to thechart below.

If they don't have what you need in stock, they can order it for you.

PUBLICATION ORDER NUMBER PUBLICATION DESCRIPTION

9999-95-063B-07 2007 WORKSHOP MANUAL (English)

9999-MX-063B-07 2007 WORKSHOP MANUAL (Spanish)

9999-95-039G-07 2007 WIRING DIAGRAM (English)

9999-MX-039G-07 2007 WIRING DIAGRAM (Spanish)

9999-95-078C-07R2 (U.S.A. only) 2007 OWNER'S MANUAL

9999-EC-078C-07R2 (Canada only) 2007 OWNER'S MANUAL

9999-PR-078C-07R2 (Puerto Rico, Mexico only) 2007 OWNER'S MANUAL

qWORKSHOP MANUAL:

Covers recommended maintenance and repair procedures of the drive train, body andchassis.

qWIRING DIAGRAM:

Provides electrical schematics as well as component location for the entire electricalsystem.

qOWNER'S MANUAL:

This booklet contains information regarding the proper care and operation of your vehicle.This is not a technician's manual.

9-44


Service Publications


Form No.8W89-EA-06K

Black plate (369,1)

10 Specifications

Technical information about your Mazda.

Identification Numbers ............................................................... 10-2Vehicle Information Labels ..................................................... 10-2

Specifications ............................................................................... 10-4Specifications .......................................................................... 10-4

10-1


Form No.8W89-EA-06K

Black plate (370,1)

Vehicle Information Labels

qVehicle Identification Number

The vehicle identification number legallyidentifies your vehicle. The number is ona plate attached to the left top side of thedashboard. This plate can easily be seenthrough the windshield.

qMotor Vehicle Safety Standard Label

qVehicle Emission ControlInformation Label

qTire Pressure Label

10-2

Identification Numbers


Form No.8W89-EA-06K

Black plate (371,1)

qEngine Number

2.3-liter engine

Forward

3.0-liter engine

Forward

Identification Numbers

10-3


Form No.8W89-EA-06K

Black plate (372,1)

Specifications

qEngine

ItemSpecification

2.3-liter engine 3.0-liter engine

Type DOHC-16V in-line, 4-cylinder DOHC-24V 60°V, 6-cylinder

Bore×Stroke 87.5 × 94.0 mm (3.44 × 3.70 in) 89.0 × 79.5 mm (3.50 × 3.13 in)

Displacement 2,261 ml (2,261 cc, 137.9 cu in) 2,967 ml (2,967 cc, 181.0 cu in)

Compression ratio 9.7 10.0

qElectrical System

Item Classification

Battery 12V-50AH/5HR

Spark-plug number2.3-liter engine

LFG1 18 110*1

L3Y2 18 110

3.0-liter engine AJ57 18 110*1*2

Spark-plug gap2.3-liter engine 1.25―1.35 mm (0.050―0.053 in)

3.0-liter engine 1.29―1.45 mm (0.051―0.057 in)

*1 ex factory*2 Verify the spark plug type from the spark plug itself. If the spark plug type cannot be determined, consult an

Authorized Mazda Dealer.

CAUTIONWhen cleaning the iridium plugs, do not use a wire brush. The fine particulate coating onthe iridium alloy and platinum tips could be damaged.

10-4

Specifications


Form No.8W89-EA-06K

Black plate (373,1)

qLubricant Quality

Lubricant Classification

Engine oilRefer to the recommended SAE viscosity numbers

on page 8-18.

Manual transaxle oil

2.3-liter engine

Any temperatureAPI Service GL-4 or GL-5

SAE 75W-90

Above 10°C (50°F)API Service GL-4 or GL-5

SAE 80W-90

3.0-liter engineAPI Service GL-4 or GL-5

SAE 75W-90

Automatic transaxle fluid2.3-liter engine ATF M-V

3.0-liter engine JWS3309

Power steering fluid ATF M-V, or equivalent (e.g. Dexron® III)

Brake fluid SAE J1703, or FMVSS116 DOT-3

qCapacities

(Approximate Quantities)

Item Capacity

Engine oil

2.3-liter engine

With oil filterreplacement

4.3 L (4.5 US qt, 3.8 Imp qt)

Without oil filterreplacement

3.9 L (4.1 US qt, 3.4 Imp qt)

3.0-liter engine

With oil filterreplacement

5.7 L (6.0 US qt, 5.0 Imp qt)

Without oil filterreplacement

5.2 L (5.5 US qt, 4.6 Imp qt)

Coolant2.3-liter engine 7.0 L (7.4 US qt, 6.2 Imp qt)

3.0-liter engine 8.5 L (9.0 US qt, 7.5 Imp qt)

Manual transaxle oil2.3-liter engine 2.87 L (3.03 US qt, 2.53 Imp qt)


Automatic transaxle fluid2.3-liter engine 8.14 L (8.60 US qt, 7.16 Imp qt)


Fuel tank 68.0 L (18.0 US gal, 15.0 Imp gal)

Check oil and fluid levels with dipsticks or reservoir gauges.

Specifications

10-5


Form No.8W89-EA-06K

Black plate (374,1)

qDimensions

Item Specification

Overall length

Sedan 4,745 mm*3 (186.8 in), 4,765 mm*4 (187.6 in)

5-Door 4,745 mm*3 (186.8 in), 4,765 mm*4 (187.6 in)

Sport Wagon 4,770 mm*3 (187.8 in), 4,785 mm*4 (188.4 in)

Overall width 1,780 mm (70.1 in)

Overall heightSedan/5-Door 1,440 mm (56.7 in)

Sport Wagon 1,455 mm (57.3 in)

Track, front 1,540 mm*1 (60.6 in), 1,530 mm*2 (60.2 in)

Track, rear 1,540 mm*1 (60.6 in), 1,530 mm*2 (60.2 in)

Wheelbase 2,675 mm (105.3 in)

*1 16-inch wheel vehicle*2 17-inch/18-inch wheel vehicle*3 Without license plate holder*4 With license plate holder

qWeights

Specification Item Weight

2.3-liter engine

GVWR (Gross Vehicle Weight Rating) 1,940 kg (4,279 lbs)

GAWR (Gross Axle Weight Rating)Front 1,005 kg (2,216 lbs)

Rear 936 kg (2,064 lbs)

3.0-liter engine

GVWR (Gross Vehicle Weight Rating) 2,052 kg (4,526 lbs)

GAWR (Gross Axle Weight Rating)Front 1,084 kg (2,390 lbs)

Rear 968 kg (2,136 lbs)

qAir Conditioner

Item Classification

Refrigerant Type HFC134a (R-134a)

10-6

Specifications


Form No.8W89-EA-06K

Black plate (375,1)

qLight Bulbs

Exterior light

Light bulbCategory

Wattage ECE R (SAE)

Headlights

High beam 55 H1 (―)

Low beamHalogen 55 H1 (―)

Xenon fusion 35 D2S (―)

Front turn signal lights 27 ― (#2357A)

Parking lights 5 W5W (―)

Fog lightsí 55 H11 (H11)

Side-marker lights 5 ― (―)


SedanNon-LED bulb 18.4 W16W (#921)

LED bulb*2 4 ― (―)

5-Door 21 W21W (#7440)

Sport WagonNon-LED bulb 21 W21W (#7440)

LED bulb*2 4 ― (―)

Rear turn signal lightsSedan/5-Door 21 WY21W (―)

Sport wagon 21 W21W (#7440)

Brake lights/Taillights 21/5 W21/5W (#7443)

Taillights 5*1 W21/5W (#7443)

Reverse lights 18.4 W16W (#921)

License plate lights 5 W5W (―)

*1 Use a 21/5W type bulb.*2 Bulb replacement is not possible because it is built into the unit. Replace the unit.

Interior light

Light bulbCategory

Wattage ECE R

Trunk light (Sedan) 3 ―

Overhead light/Map lights 5 W5W

Courtesy lights 5 W5W

Vanity mirror lights*Type A 1.2 ―

Type B 3 ―

Luggage compartment light5-Door 5 ―

Sport Wagon 10 ―

* Vanity mirror lights

Specifications

10-7íSome models.


Form No.8W89-EA-06K

Black plate (376,1)

Type BType A

qTires

NOTE

The tires have been optimally matched with the chassis of your vehicle.When replacing tires, Mazda recommends that you replace tires of the same typeoriginally fitted to your vehicle. For details, contact an Authorized Mazda Dealer.

Check the tire pressure label for tire size and inflation pressure.Refer to Tire Inflation Pressure on page 8-35.

Standard tire

Tire sizeInflation pressure

Front Rear

P205/60R16 91V 220 kPa(2.2 kgf/cm2, 32 psi or lb/po2)

220 kPa(2.2 kgf/cm2, 32 psi or lb/po2)P215/50R17 93V

215/45R18 93W240 kPa

(2.4 kgf/cm2, 35 psi or lb/po2)240 kPa

(2.4 kgf/cm2, 35 psi or lb/po2)

Temporary spare tire

Tire size Inflation pressure

T115/70D16 420 kPa (60 psi)

qFuses

Refer to the fuse rating on page 8-49.

10-8

Specifications


Form No.8W89-EA-06K

Black plate (377,1)

11 Index

11-1


Form No.8W89-EA-06K

Black plate (378,1)

A

Add-On Non-Genuine Parts andAccessories ....................................... 9-16Air Bag Systems ............................... 2-46Ambient Temperature Display .......... 6-53Antenna ............................................. 6-16Anti-Lock Brake System (ABS) ......... 5-6

Warning light ............................... 5-7Appearance Care ............................... 8-54Audio System ................................... 6-16

Audio control switch .................. 6-45Audio set .................................... 6-27Operating tips for audiosystem ........................................ 6-16Safety certification ..................... 6-48

Automatic TransaxleDriving tips ................................ 5-17Fluid ........................................... 8-24Manual shift mode ..................... 5-13Shift-lock system ....................... 5-12Transaxle ranges ......................... 5-11

B

BatteryEmergency starting .................... 7-17Maintenance ............................... 8-33Specifications ............................. 10-4

Beep soundsIgnition key reminder ................. 5-39Lights-on reminder ..................... 5-39Seat belt warning beep ............... 5-39

Before Starting the Engine .................. 4-6After getting in ............................. 4-6Before getting in .......................... 4-6

Body Lubrication .............................. 8-28Bottle Holder ..................................... 6-55Brake/Clutch

Fluid ........................................... 8-22

B

BrakesAnti-lock brake system (ABS) ..... 5-6Foot brake .................................... 5-4Pad wear indicator ........................ 5-8Parking brake ............................... 5-5Warning light ............................... 5-6

Break-In Period ................................... 4-7Bulb Replacement ............................. 8-39

C

Capacities .......................................... 10-5Carbon Monoxide ............................... 4-5Cargo Securing Loops ...................... 6-58Cargo Sub-Compartment .................. 6-59Catalytic Converter ............................. 4-3Cell Phones ....................................... 9-17Center Box ........................................ 6-56Center Console .................................. 6-57Child Restraint

Installing child-restraintsystems ....................................... 2-33LATCH child-restraintsystems ....................................... 2-41

Child Safety Locks for Rear Doors ... 3-11Climate Control System ...................... 6-2

Gas specifications ...................... 10-6Clock ................................................. 6-53Cruise Control ................................... 5-18Cup Holder ........................................ 6-54Customer Assistance ........................... 9-2

D

Dashboard Illumination .................... 5-27Daytime Running Lights ................... 5-41Defroster

Rear window .............................. 5-45

11-2

Index


Form No.8W89-EA-06K

Black plate (379,1)

D

Dimensions ....................................... 10-6Door Locks ......................................... 3-9Driving In Flooded Area ................... 4-10Driving Tips ........................................ 4-7

Automatic transaxle ................... 5-17Break-in period ............................ 4-7Driving in flooded area .............. 4-10Hazardous driving ........................ 4-8Money-saving suggestions ........... 4-7Rocking the vehicle ...................... 4-9Winter driving .............................. 4-9

E

Emergency Starting ........................... 7-17Flooded engine ........................... 7-17Jump-starting .............................. 7-18Push-starting .............................. 7-20

Emergency Towing ........................... 7-21Emission Control System .................... 4-3Engine

Coolant ....................................... 8-20Exhaust gas .................................. 4-5Hood release .............................. 3-32Oil .............................................. 8-18Overheating ................................ 7-15Starting ......................................... 5-3

Engine Compartment Overview ........ 8-17Engine Coolant

Overheating ................................ 7-15Engine Coolant TemperatureGauge ................................................ 5-26Exhaust Gas ........................................ 4-5Exterior Care ..................................... 8-56

F

FlasherHazard warning .......................... 5-46Headlights .................................. 5-40

Flat Tire ............................................... 7-3Changing ...................................... 7-8Spare tire and tool storage ............ 7-3

FluidsOwner maintenance ................... 8-15

Fog Lights ......................................... 5-42Foot Brake .......................................... 5-4Front Seats(Electrically Operated Seats) ............... 2-5Front Seats(Manually Operated Seats) ................. 2-2Fuel

Filler lid and cap ........................ 3-30Gauge ......................................... 5-27Requirements ............................... 4-2Tank capacity ............................. 10-5

Fuses ................................................. 8-49Panel description ........................ 8-51Replacement ............................... 8-49

G

Glove Box ......................................... 6-57

H

Hatch ................................................. 3-12Luggage compartment cover ...... 3-13Luggage strap ............................. 3-13

Hazard Warning Flasher .................... 5-46Hazardous Driving .............................. 4-8

Index

11-3


Form No.8W89-EA-06K

Black plate (380,1)

H

HeadlightsControl ....................................... 5-40Flashing ...................................... 5-41High-low beam .......................... 5-41Leveling ..................................... 5-41On reminder ............................... 5-40

HomeLink Wireless ControlSystem .............................................. 5-47Hood Release .................................... 3-32Horn .................................................. 5-46

I

IgnitionKeys ............................................. 3-2Switch .......................................... 5-2

Illuminated Entry System ................. 6-49Immobilizer System .......................... 3-35Indicator Lights ................................. 5-29

Cruise Main ................................ 5-38Cruise set .................................... 5-38Headlight high-beam .................. 5-37Security ...................................... 5-36Shift position .............................. 5-37TCS ............................................ 5-37TCS OFF .................................... 5-38Turn-signal/hazard warning ....... 5-39

Information Display .......................... 6-52Ambient temperature display ..... 6-53Audio display ............................. 6-54Climate control display .............. 6-54Clock .......................................... 6-53Information display functions .... 6-52

Inside Trunk Release Lever ............... 3-22Instrument Cluster ............................. 5-24Interior Care ...................................... 8-59Interior Lights ................................... 6-49

J

Jump-Starting .................................... 7-18

K

Keyless Entry System ......................... 3-3Keys .................................................... 3-2

L

Label Information ............................. 10-2Lane-Change Signals ........................ 5-42Liftgate .............................................. 3-14

Luggage compartment cover ...... 3-15Luggage compartment net .......... 3-17

Light BulbsReplacement ............................... 8-39Specifications ............................. 10-7

Lighting Control ............................... 5-40Luggage Compartment Light ............ 6-51

M

MaintenanceIntroduction .................................. 8-2Owner maintenanceprecautions ................................. 8-16Owner maintenance schedule ..... 8-15Scheduled ..................................... 8-3

Manual Transaxle Operation ............... 5-9Recommendations for shifting.... 5-10

Map Lights ........................................ 6-50Mirrors

Outside mirrors .......................... 3-40Rearview mirror ......................... 3-41

Money-Saving Suggestions ................ 4-7Moonroof .......................................... 3-33

11-4

Index


Form No.8W89-EA-06K

Black plate (381,1)

O

Odometer and Trip Meter .................. 5-25Outside Mirrors ................................. 3-40Overhead Console ............................. 6-56Overhead Lights ................................ 6-50Overheating ....................................... 7-15Overloading ...................................... 4-11

P

Paint Damage .................................... 8-54Parking Brake ..................................... 5-5Parking in an Emergency .................... 7-2Power Door Locks ............................ 3-10Power Steering .................................. 5-18

Fluid ........................................... 8-23Power Windows ................................ 3-23Push-Starting ..................................... 7-20

R

Rear Door Child Safety Locks .......... 3-11Rear Seat ............................................. 2-9Rear Window Defroster .................... 5-45Rear Window Washer ....................... 5-44Rear Window Wiper .......................... 5-44Rearview Mirror ................................ 3-41Recreational Towing ......................... 7-22Registering Your Vehicle in A ForeignCountry ............................................. 9-15Rocking the Vehicle ............................ 4-9

S

Safety Defects, Reporting ................. 9-42

S

Seat Belt System3-point type(Except center-rear position) ...... 2-19Automatic locking ...................... 2-18Belt minder ................................. 2-27Center-rear position .................... 2-23Emergency locking .................... 2-18Extender ..................................... 2-26Pregnant women ........................ 2-18Pretensioner and load limiting .... 2-21Seat belt precautions .................. 2-16Warning light/beep ..................... 2-27

SeatsFront seat(Electrically operated seats) ......... 2-5Front seat(Manually operated seats) ............ 2-2Rear seat ....................................... 2-9

Security SystemImmobilizer system .................... 3-35Theft-deterrent system ............... 3-38

Service Publications .......................... 9-44Spare Tire and Tool Storage ................ 7-3Specifications .................................... 10-4Speedometer ...................................... 5-25SRS Air Bags

How the Air Bags Work ............. 2-53Supplemental restraint systemsprecautions ................................. 2-46

Starting the Engine .............................. 5-3Steering Wheel .................................. 3-40

Horn ........................................... 5-46Storage Box ...................................... 6-57

Index

11-5


Form No.8W89-EA-06K

Black plate (382,1)

S

Storage Compartments ...................... 6-56Cargo securing loops .................. 6-58Cargo sub-compartment ............. 6-59Center box .................................. 6-56Center console ............................ 6-57Glove box ................................... 6-57Overhead console ....................... 6-56Storage box ................................ 6-57Storage pocket ............................ 6-56

Storage Pocket .................................. 6-56Sunshade ........................................... 3-34Sunvisors .......................................... 6-49

T

Tachometer ........................................ 5-26Temporary Spare Tire ....................... 8-37Theft-Deterrent System ..................... 3-38Tire Information ................................ 9-22Tires

Flat tire ......................................... 7-3Inflation pressure ........................ 8-35Replacement ............................... 8-36Rotation ...................................... 8-35Snow tires .................................. 4-10Spare tire and tool storage ............ 7-3Specifications ............................. 10-8Tire chains .................................. 4-10Uniform tire quality grading system(UTQGS) ................................... 9-20

Tool ..................................................... 7-3Towing

Description ................................. 7-21Emergency towing ..................... 7-21Recreational towing ................... 7-22

T

Traction Control System (TCS) ........ 5-22TCS indicator light ..................... 5-22TCS OFF indicator light ............ 5-22TCS OFF switch ........................ 5-23

Trip Meter ......................................... 5-25Trunk Lid .......................................... 3-20

Inside trunk release lever ............ 3-22Trunk Light ....................................... 3-21Turn and Lane-Change Signals ......... 5-42

V

Vanity Mirrors ................................... 6-49Vehicle Information Labels ............... 10-2

W

Warning Lights ................................. 5-29ABS ............................................ 5-31Air bag system ........................... 5-34Automatic transaxle ................... 5-36Brake system .............................. 5-31Charging system ......................... 5-32Check engine .............................. 5-33Door-ajar .................................... 5-36Engine oil pressure ..................... 5-33Front seat belt pretensionersystem ........................................ 5-34Low fuel ..................................... 5-34Low washer fluid level ............... 5-36Seat belt ...................................... 5-34

Warranty ............................................ 9-12Washer Fluid ..................................... 8-27Weights ............................................. 10-6Wheel Replacement .......................... 8-37Windows

Power windows .......................... 3-23Windshield Washer ........................... 5-44

11-6

Index


Form No.8W89-EA-06K

Black plate (383,1)

W

Windshield Wipers ............................ 5-43Blades replacement .................... 8-28

Winter Driving .................................... 4-9

Index

11-7


Form No.8W89-EA-06K

Black plate (384,1)

11-8


Form No.8W89-EA-06K

Documents

Mazda6 8W89-EA-06K Edition1 - Mazda CanadaBefore Driving Your Mazda Important information about driving your Mazda. 4 Driving Your Mazda Explanation of instruments and controls. 5