of 5 /5
1 Maximum performance and durability TCE 443x-24 / 447x

Maximum performance and durability TCE 443x-24 / …...TCE 4435-24 S43 • TCE 4435-24 S431 • TCE 4435-24 S44 • TCE 4435-24 S441 • Models TCE 447x IT device Ergo Control TLL

  • Upload
    others

  • View
    29

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Maximum performance and durability TCE 443x-24 / …...TCE 4435-24 S43 • TCE 4435-24 S431 • TCE 4435-24 S44 • TCE 4435-24 S441 • Models TCE 447x IT device Ergo Control TLL

1

Maximum performance and durabilityTCE 443x-24 / 447x

Page 2: Maximum performance and durability TCE 443x-24 / …...TCE 4435-24 S43 • TCE 4435-24 S431 • TCE 4435-24 S44 • TCE 4435-24 S441 • Models TCE 447x IT device Ergo Control TLL

2 3

For all wheel sizes and high volumes workshopsBig space for wheel seating, outside clamping 24"/28", wheel width up to 12,5/15" without any special accessories

Time saverThe redesigned jaws protectors allow steel rims internal clamping without time-consumingconversion

SpeedyThe two-speed turntable is easily operated using a pedal

Within reachControl switches are placed to be accessible from any working area

NeW TCe 330*Helper arm device ergonomic and flexible

extreme precisionThe horizontal arm and the follower arm allow a precise and smooth control in the whole process – 5500 N and 2500 N

Full control, maximum reliabilityThe control by using the lever gives the operator a maximum of sensitivity and protects the rim

ergo control* (patent pending) – saving time with more comfort and safetyThe new hand bead breaker system allows to execute the operation always in an ergonomic working position

Ergonomic and easy to use for maximum performance

Without any efforts*Pneumatic locking of the mounting head and movement of the TLL 130 allows to perfectly follow the rim profile making easier the access of the tools and allowing perfect bead extraction.

*Available only for specific models

WDK approved*Certified for RunFlat and UHP-tyres

TCE 443x-24 / 447xMaximum performance and durability

TCE 4470 S441

Bosch TCE 4430-24/4435-24 and TCE 4470/4475 tilt-back tyre changers provide a range

of innovative features designed for maximum speed, performance and durability – even

for the toughest UHP or RFT passenger car and light commercial tyres. With the addition of

a special accessory kit, these machines can also handle motorcycle tyres. Bosch TCE330,

the new helper arm device is especially designed for tyre specialists and high volume

workshops. Both tyre changers can also be equipped with the lift TSL 230 which allows

you to work always in an ergonomic position.

Key features

Big space for wheel seating – outside clamping 24/28 inch and wheel width up to 12,5/15 inch without any special pre-adjustment

Revolutionary Ergo Control bead breaker makes the operation safe, quick, precise and comfortable

TCE 330, helper arm with two independent pressing points

TSL 230 lift as accessory with integrated roller board

TCE 4435-24

Page 3: Maximum performance and durability TCE 443x-24 / …...TCE 4435-24 S43 • TCE 4435-24 S431 • TCE 4435-24 S44 • TCE 4435-24 S441 • Models TCE 447x IT device Ergo Control TLL

4 5

Your choice – your requirements: TLL 130, IT and Ergo Control

TCE 330, TSL 230, G-Frame and two drive motors

TLL 130 – tyre leverless systemMovement of the TLL 130 allows to perfectly follow the rim profile making easier the access of the tools and allowing perfect bead extraction. The hexagonal vertical arm allows less flexion ensuring the best results. The upgraded TLL 130 with it`s new surface treatment is approved from WDK and BMW.

IT – inflation technology Tyre inflation and blast of air are controlled by pedal Tyre inflation assistance system through the jaws, which thanks to the new

design, guarantees higher air jet power Tyre inflation system is controlled by a side pedal and is up to 25 % faster

than similar devices.

ergo Control (patent pending) system: a revolution in tyre changingThey can be equipped with the NEW Ergo Control: the bead breaker is controlled by the handle rather than a pedal making the bead breaking operation safe, quick, precise and comfortable.

Ergonomic working position – the back is less stressed with respect to the traditional system, just stand in front of the wheel.

Increased safety – the use of the main bead breaker lever (patented) avoids shock to the operators arm making bead breaking a safe operation.

Maximum control – the control by using the lever gives the operator a maximum of sensitivity.

Increased speed – the bead breaker can be stopped immediately the bead is unseated - no need to fully open or close the blade.

Less cost – reduction of air consumption.

TLL 130 – tyre leverless system

IT – inflation technology Ergo Control (patent pending) TCE 330 – helper arm device G-Frame TSL 230 – Lift

TCe 330 – helper arm device: ergonomic and flexibleThe TCE 330 is a pneumatic device featuring two separately controlled arms which simplify mounting and demounting of UHP and RFT tyres. TCE 330 is designed to offer a great user experience, control switches are placed to be accessible from any working area and together with the higher positioning of the follower arm facilitate all operations on the tyre bead.

TSL 230 – simple and easy to useAll new tyre changer platforms can be upgraded with the TSL 230 which allows the operator to always work in an ergonomic position. The TSL 230 is mounted on the right side of the machine next to the bead breaker which allows for improved productivity. The lift is also equipped with an integrated roller board which leads to an easier and faster bead breaking operation.

G-Frame: durable and functional designAt the heart of the new tyre changers is the unique Bosch G-Frame concept. This advanced design feature increases the rigidity of the machine to shorten the flow of internal forces and providing superior control handling tyre and rim. It also improves the speed of the tyre change.

Innovation and user-friendlinessThe two-speed turntable is easily operated using a pedal. In the 230 V version, a special electronic system automatically ensures higher torque and a smooth start. The revised design of the turntable makes it easier to clamp the rim. The redesigned jaw protectors allow internal clamping of steel rims without time-consuming conversion. The integrated tyre inflation system is controlled by a side pedal.

Page 4: Maximum performance and durability TCE 443x-24 / …...TCE 4435-24 S43 • TCE 4435-24 S431 • TCE 4435-24 S44 • TCE 4435-24 S441 • Models TCE 447x IT device Ergo Control TLL

6 7

Accessory programto improve your work

Advantages and some more information

Order Nr. / Description

1 695 108 055 Pressing point

1 695 102 148Jaws plastic protection kit (4 pcs.)

1 695 101 608 Demounting head tongue protection (5 pcs.)

1 695 106 152 Bead breaker plastic protection

1 695 102 584 Storage kit

1 695 105 191 Plastic rim protection

1 695 103 060 Kit WDK for run flat and ultra high performances tyres

Order Nr. / Description

1 695 107 467 TSL 230

1 695 101 575 Motorbike / scooter adaptors

1 695 103 210 Motorbike mounting head kit

1 695 101 518Bead breaking bearing motorbike wheel

1 695 103 211 Plastic mounting / demounting head complete with adaptor

1 695 103 216 Bead pressing device (thick)

1 695 101 372 External IT kit (4470 models only)

Mod

elle

TCE

443x

-24

IT d

evic

e

Ergo

Con

trol

TLL

130

WDK

kit

RAL

6018

RAL

7016

230

V 1

ph

400

V 3

ph

TCE 4430-24 S121 • • • • •TCE 4430-24 S40 • • • •TCE 4430-24 S401 • • • • •TCE 4430-24 S421 • • • • •TCE 4430-24 S43 • • •TCE 4430-24 S431 • • • •TCE 4430-24 S44 • • •TCE 4430-24 S441 • • • •TCE 4430-24 S47 • • • •TCE 4430-24 S471 • • • • •TCE 4435-24 S121 • • • • • •TCE 4435-24 S421 • • • • • •TCE 4435-24 S43 • • • •TCE 4435-24 S431 • • • • •TCE 4435-24 S44 • • • •TCE 4435-24 S441 • • • • •

Mod

els

TCE

447x

IT d

evic

e

Ergo

Con

trol

TLL

130

WDK

kit

RAL

6018

RAL

7016

230

V 1

ph

400

V 3

ph

TCE 4470 S121 • • • • •TCE 4470 S40 • • • •TCE 4470 S401 • • • • •TCE 4470 S421 • • • • •TCE 4470 S43 • • •TCE 4470 S431 • • • •TCE 4470 S44 • • •TCE 4470 S441 • • • •TCE 4470 S47 • • • •TCE 4470 S471 • • • • •TCE 4475 S121 • • • • • •TCE 4475 S43 • • • •TCE 4475 S431 • • • • •TCE 4475 S44 • • • •TCE 4475 S441 • • • • •

Technical data TCe 443x-24 TCe 447x

Power supply400 V 3 ph 50 Hz230 V 1 ph 50/60 Hz

400 V 3 ph 50 Hz230 V 1 ph 50/60 Hz

Rim diameter – external clamping 10" – 24" 12" – 28"

Rim diameter – internal clamping 12" – 28" 13" – 32"

Rim width3" – 12,5"4" – 15" (with TLL)

3" – 15"4" – 15" (with TLL)

Max. wheel diameter 1200 mm 1200 mm

Air pressure 8 – 10 bar 8 – 10 bar

Rotational speed of the turntable

7 RPM (lower speed)15 RPM (higher speed)

7 RPM (lower speed)15 RPM (higher speed)

TCE 330: max. press force5500 N (horizontal arm)2500 N (follower arm)

5500 N (horizontal arm)2500 N (follower arm)

Bead breaker range 70 – 397 mm 70 – 397 mm

Bead breaking force 11500 N 11500 N

Convenient tyre changing Self-centring four-jaw chuck Save time, no need to remove plastic jaws protection

for steel rims inside clamping thanks to their new design

100 mm diameter of mounting column cylinder guarantees column and mounting head stability

Optimized storage/holder for bead lever Universal, flexible adjustment of the lubricant ring

shaped holder, one fits for all

Reduced effort for the operator – increased safety and speed! Be flexible and optimize your job. Save time thanks to

40 % faster bead breaking cylinder Cushioned cylinder for rapid but smooth movement, of

the vertical tilting back pole, at the end of the stroke Time saving tyre inflation, 25 % faster than other

comparable brands. Now easier to reach double-scale pressure gauge (bar/psi) on the side of the pole

Fast clamping thanks to the new self centring table top with more roboust desing and inch scale laser printed

Bright yellow warning and knee protection safety signs at turntable cylinders ("yellow fin")

Special treatment to protect the turntable from dust and rust. Clean has never been so easy! (patent pending)

By a simple movement it is possible to reach the max. turntable working range

Scope of delivery: 1x Roller board for bead breaker 1x Bead pressing device 1x Bead breaker plastic protection 1x Wing side protection for demounting head 1x Tongue protection kit for demounting head 1x Jaws plastic protection kit 1x Bead lever 1x Lubricant brush 1x TCE 330 helper arm device* 1x Ergo Control* 1x TLL 130 tyre leverless system*

*Available only for specific models

Page 5: Maximum performance and durability TCE 443x-24 / …...TCE 4435-24 S43 • TCE 4435-24 S431 • TCE 4435-24 S44 • TCE 4435-24 S441 • Models TCE 447x IT device Ergo Control TLL

What drives you, drives us.

Technology from Bosch is used in practically every vehicle in the world. For us, the focus is on people and helping them to stay mobile.

We have been dedicated to people for more than 125 years with our pioneering spirit, research, production and expertise.

Our dedication is an unwaivering commitment to providing them with a unique combination of parts, diagnostics, workshop equipment and services:

state-of-the-art solutions for efficient vehicle repairs

innovative workshop equipment and software – also available on favorable lease terms

the world’s largest range of new and remanufactured spare parts

fast, reliable delivery service

expert customer care via our hotline

extensive range of training courses

specific sales and marketing support

plus many other services

Bosch products and services Diagnostics

Diesel systems

Gasoline systems

Brake systems

Spark plugs

Energy systems

Batteries

Filters

Wiper systems

Light technology

Comfort electronics

Hybrid/e-mobility

Technical hotline

Knowledge database

Service training

Workshop concepts

Bosch electronic repair service

Fair repair: repairs in line with the market value Fast and reliable: most work completed within

48 hours Quality remains priority: Bosch is committed

to this as a globally leading original equipment manufacturer

Find out more at:https://www.bosch-repair-service.com/

Sub

ject

to te

chni

cal a

nd p

rogr

am c

hang

es.

AA

-AS

/MKC

F

026

P02

836

20

16/0

5

Robert Bosch GmbH Automotive AftermarketBusiness Unit Automotive Service Solutions

73201 PlochingenGermany www.bosch-workshopworld.com