Master Reference List

7/25/2019 Master Reference List

1/3

SEAOC Blue Book - Seismic Design Recommendations

Master Reference List

Article 0.02.010 Page 1 of 3 September 2006

www.seaoc.org/bluebook

References

A

ATC (1978).Tentative Provisions for the Development of Seismic Regulations for Buildings (ATC 3-06), Applied

Technology Council, Redwood City, CA. (A second printing, in 1984, includes 1982 amendments.)

B

Bachman, Robert E. (1995). Briefing on the 1995 Blue Book, approved seismic code provisions for the 1996 UBC

Supplement and proposed 1997 UBC seismic provisions for strength design, Proceedings: 64th

Annual Convention,Structural Engineers Association of California.

Blume, J.A., Newmark, N.M., and Corning, L.H. (1961).Design of Multi-story Concrete Buildings for Earthquake

Motions, Portland Cement Association.

BSSC (2001a).NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures,2000 Edition, Part 1Provisions(FEMA 368). Building Seismic Safety Council, Washington, D.C., March.

BSSC (2001b).NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures,2000 Edition, Part 2Commentary(FEMA 369). Building Seismic Safety Council, Washington, D.C., March.

BSSC (2004a).NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures,Part 1: Provisions(FEMA 450-1/2003 Edition). Building Seismic Safety Council, Washington, D.C.

BSSC (2004b).NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures,

Part 2: Commentary(FEMA 450-2/2003 Edition). Building Seismic Safety Council, Washington, D.C.

Bush, George H.W. (1990).Executive Order No. 12699: Seismic Safety of Federal and Federally Assisted orRegulated New Building Construction, available from the Library of Congress, Washington, D.C.

C

CBSC (2005). Building Standards Commission March 16, 2005 Meeting. (See http://www.bsc.ca.gov/.)

Cobeen, Kelly (1995). Nationalizing the design and materials chapters of the 1997 UBC: SEAOC Code Committeeproposal for the Uniform Building Code,Proceedings: 64 th Annual Convention, Structural Engineers Association

of California.

D

Degenkolb, Henry J. (1986). Code provisions resulting from earthquake observations, in Learning from

Earthquakes, Structural Engineers Association of Northern California, San Francisco, March.

H

Hamburger, Ronald O. and Kircher, Charles A. (2000). Preface: Recent developments in seismic designmethodologies and codes,Earthquake Spectra, v. 16 n. 1, February.

Henry, John R. and Johnson, Mark A. (2003). Keeping up with the changes: Referenced standards and the 2003

IBC,Structural Engineer, June.

M

Mahoney, Michael and Sheckler, Timothy (2001). The world of building codes, standards and provisions: A view

according to FEMA,SEAOC 2001 70th

Annual Convention Proceedings, Structural Engineers Association ofCalifornia.

N
http://www.bsc.ca.gov/


2/3





National Bureau of Standards (1982). Minimum Design Loads for Buildings(ANSI A58.1), Washington, D.C.

O

OSHPD (2003).Evaluation of the 2003 Model Codes: Final Report, Office of Statewide Health Planning and

Development, July 29. Available at www.oshpd.state.ca.us/fdd/About_Us/Organization/Regulations/EVALfinal-ALL.pdf.

P

Pacific Coast Building Officials (1928).Uniform Building Code, Whittier, CA.

Porush, Allan R. and Zacher, Edwin G. (1987). SEAOC, the Blue Book and seismic codes: past, present, and

future,Proceedings: 56th

Annual Convention, Structural Engineers Association of California.

S

SAC Joint Venture (2000a).Recommended Seismic Design Criteria for New Steel Moment Frame Buildings

(FEMA-350).Federal Emergency Management Agency, Washington D.C.

SAC Joint Venture (2000b).Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded SteelMoment Frame Buildings(FEMA-351). Federal Emergency Management Agency, Washington D.C.

SAC Joint Venture (2000c).Recommended Post-earthquake Evaluation and Repair Criteria for Welded, Steel

Moment Frame Buildings(FEMA-352). Federal Emergency Management Agency, Washington D.C.

SAC Joint Venture (2000d).Recommended Specifications and Quality Assurance Guidelines for Steel MomentFrame Construction for Seismic Applications(FEMA-353). Federal Emergency Management Agency, Washington

D.C.

SAC Joint Venture (2000e).State of the Art Report on Base Metals and Fracture(FEMA-355A), K. Frank and J.Barsom, team leaders. Federal Emergency Management Agency, Washington D.C.

SAC Joint Venture (2000f).State of the Art Report on Welding and Inspection (FEMA-355B), M. Johnson, team

leader. Federal Emergency Management Agency, Washington D.C.

SAC Joint Venture (2000g). State of the Art Report on Systems Performance (FEMA-355C), H. Krawinkler, teamleader. Federal Emergency Management Agency, Washington D.C.

SAC Joint Venture (2000h). State of the Art Report on Connection Performance (FEMA-355D), C. Roeder, teamleader. Federal Emergency Management Agency, Washington D.C.

SAC Joint Venture (2000i).State of the Art Report on Past Performance of Steel Moment-Frame Buildings in

Earthquakes(FEMA-355E),D. Bonowitz and E. Reis, authors. Federal Emergency Management Agency,Washington, D.C.

SAC Joint Venture (2000j).State of the Art Report on Performance Prediction and Evaluation(FEMA-355F), D.

Foutch, team leader. Federal Emergency Management Agency, Washington D.C.

Seismology (1959).Recommended Lateral Force Requirements, Seismology Committee, Structural EngineersAssociation of California, July.

Seismology (1960).Recommended Lateral Force Requirements and Commentary, Seismology Committee,

Structural Engineers Association of California.
http://www.oshpd.state.ca.us/fdd/About_Us/Organization/Regulations/EVALfinal-ALL.pdfhttp://www.oshpd.state.ca.us/fdd/About_Us/Organization/Regulations/EVALfinal-ALL.pdfhttp://www.oshpd.state.ca.us/fdd/About_Us/Organization/Regulations/EVALfinal-ALL.pdf


3/3





Seismology (1996).Recommended Lateral Force Requirements and Commentary, Sixth Edition , SeismologyCommittee, Structural Engineers Association of California, September.

Seismology (1999).Recommended Lateral Force Requirements and Commentary, Seventh Edition , Seismology

Committee, Structural Engineers Association of California, September.

Documents

Master Reference List