Marc Krusin KnollStudio Pixel™ Table Series Grommet and ... · Marc Krusin Pixel™ Table Series C-Leg Tables, Flip Top Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold

Marc KrusinPixel™ Table SeriesGrommet and Electrical Module Cutout Matrix

TOP OPTIONS TROUGHOPTIONS

TYPE TABLE FRONT CENTER FRONT LEFT FRONT RIGHT FRONT LEFTAND RIGHT

CENTERCENTER CENTER

NO CUTOUTS ALL TABLES Y Y Y Y Y •

ROUNDGROMMET

FIXED T-LEG ERG DRGL DRGR DRG GRG •FLIP T-LEG ERG DRGL DRGR DRG GRG •

FIXED C-LEG ERG DRGL DRGR DRG GRG •FLIP C-LEG ERG DRGL DRGR DRG • •

FIXED Y-LEG ERG DRGL DRGR DRG GRG •FLIP Y-LEG ERG DRGL DRGR DRG • •

Y FOLD • • • • GRG * •4-LEG

RECTANGLE ERG DRGL DRGR DRG GRG •4-LEG SQUARE ERG • • • GRG •

ELEC. HGT.C-LEG ERG DRGL DRGR DRG • •

ELEC. HGT.T-LEG ERG DRGL DRGR DRG • •

COLUMN LEG • • • • GRG •

KE1, KE2, KE3

FIXED T-LEG ENO DNOL DNOR DNO GNO •FLIP T-LEG ENO DNOL DNOR DNO GNO •

FIXED C-LEG ENO DNOL DNOR DNO GNO •FLIP C-LEG • • • • • •

FIXED Y-LEG ENO DNOL DNOR DNO GNO * * •FLIP Y-LEG ENO DNOL DNOR DNO GNO * * •

Y FOLD • • • • GNO * •4-LEG

RECTANGLE ENO DNOL DNOR DNO GNO •4-LEG SQUARE ENO • • • GNO •

ELEC. HGT.C-LEG • • • • • •

ELEC. HGT.T-LEG ENO DNOL DNOR DNO • •

COLUMN LEG • • • • GNO •

KE4

FIXED T-LEG EN DNL DNR DN GN •FLIP T-LEG EN DNL DNR DN GN •

FIXED C-LEG EN DNL DNR DN GN •FLIP C-LEG EN DNL DNR DN • •

FIXED Y-LEG EN DNL DNR DN • •FLIP Y-LEG EN DNL DNR DN • •

Y FOLD • • • • GN * •4-LEG

RECTANGLE EN DNL DNR DN GN •4-LEG SQUARE EN • • • GN •

ELEC. HGT.C-LEG EN DNL DNR DN • •

ELEC. HGT.T-LEG EN DNL DNR DN • •

COLUMN LEG • • • • GN •

KE5

FIXED T-LEG EA DAL DAR DA GA •FLIP T-LEG EA DAL DAR DA GA •

FIXED C-LEG EA DAL DAR DA GA •FLIP C-LEG EA DAL DAR DA • •

FIXED Y-LEG EA DAL DAR DA • •FLIP Y-LEG EA DAL DAR DA • •

Y FOLD • • • • GA * •4-LEG

RECTANGLE EA DAL DAR DA GA •4-LEG SQUARE EA • • • GA •

ELEC. HGT.C-LEG EA DAL DAR DA • •

ELEC. HGT.T-LEG EA DAL DAR DA • •

COLUMN LEG • • • • GA •

TOP OPTIONS TROUGHOPTIONS

TYPE TABLE FRONT CENTER FRONT LEFT FRONT RIGHT FRONT LEFTAND RIGHT

CENTERCENTER CENTER

KE6

FIXED T-LEG • • • • • •FLIP T-LEG • • • • • •

FIXED C-LEG • • • • • TASFLIP C-LEG • • • • • TAS

FIXED Y-LEG • • • • • •FLIP Y-LEG • • • • • •

Y FOLD • • • • • •4-LEG

RECTANGLE • • • • • •4-LEG SQUARE • • • • • •

ELEC. HGT.C-LEG • • • • • •

ELEC. HGT.T-LEG • • • • • •

COLUMN LEG • • • • • •

KE7

FIXED T-LEG

NO CUTOUTCODE

REQUIRED -MODULE CLIPSON TO EDGE OF

TABLE.NOT AVAILABLE

ON TABLESWITH KNIFE

EDGES

NO CUTOUTCODE


TABLE.NOT AVAILABLE

ON TABLESWITH KNIFE

EDGES

NO CUTOUTCODE


TABLE.NOT AVAILABLE

ON TABLESWITH KNIFE

EDGES

NO CUTOUTCODE


TABLE.NOT AVAILABLE

ON TABLESWITH KNIFE

EDGES

NO CUTOUTCODE


TABLE.NOT AVAILABLE

ON TABLESWITH KNIFE

EDGES

NO CUTOUTCODE


TABLE.NOT AVAILABLE

ON TABLESWITH KNIFE

EDGES

FLIP T-LEGFIXED C-LEGFLIP C-LEG

FIXED Y-LEGFLIP Y-LEG

Y FOLD4-LEG

RECTANGLE4-LEG SQUARE

ELEC. HGT.C-LEG

ELEC. HGT.T-LEG

COLUMN LEG • • • • • •

KE8

FIXED T-LEG ET DTL DTR DT GT •FLIP T-LEG ET DTL DTR DT GT •

FIXED C-LEG ET DTL DTR DT GT •FLIP C-LEG ET DTL DTR DT • •

FIXED Y-LEG ET DTL DTR DT • •FLIP Y-LEG ET DTL DTR DT • •

Y FOLD • • • • GT * •4-LEG

RECTANGLE ET DTL DTR DT GT •4-LEG SQUARE ET • • • GT •

ELEC. HGT.C-LEG ET DTL DTR DT • •

ELEC. HGT.T-LEG ET DTL DTR DT • •

COLUMN LEG • • • • GT ••PATTERN CODE EXAMPLES

Y - NO CUTOUTSERG - ONE CUTOUT FRONT CENTER FOR ROUND GROMMETDN - TWO CUTOUTS FOR KE4 ELECTRICAL MODULES, (1) FRONT LEFT AND (1) FRONT RIGHT

* A Y-FOLD TABLE CONSISTS OF TWO 48� X 48� SQUARE SEGMENTS. ONE CUTOUT WILL BE PLACED IN BOTH SECTIONS FOR A TOTAL OFTWO CUTOUTS PER TABLE.

* * THE KE2 POWER CENTER IS THE ONLY POWER CENTER OFFERED IN THE CENTER / CENTER LOCATION ON THE FIXED AND FLIP Y-LEGTABLES.

• NOT AVAILABLE

KnollStudio

598 599

Marc KrusinPixel™ Table SeriesC-Leg Tables, Fixed Top

Designer(s):Marc Krusin, 2015

Award(s):Best of Neocon Gold Award, 2015

description w d h leg type pattern no. laminate/ABS edge laminate/urethane edge veneer/wood edge

KCXW Work Height, Fixed Top 48� 18� 28 3/4� C-Leg KCXW4818-( )-( )-( )-( )-( ) $1,624. $1,737. $2,858.

60� 18� 28 3/4� C-Leg KCXW6018-( )-( )-( )-( )-( ) 1,694. 1,820. 2,981.

72� 18� 28 3/4� C-Leg KCXW7218-( )-( )-( )-( )-( ) 1,755. 1,892. 3,126.

48� 24� 28 3/4� C-Leg KCXW4824-( )-( )-( )-( )-( ) 1,682. 1,804. 2,996.

60� 24� 28 3/4� C-Leg KCXW6024-( )-( )-( )-( )-( ) 1,756. 1,893. 3,175.

72� 24� 28 3/4� C-Leg KCXW7224-( )-( )-( )-( )-( ) 1,821. 1,976. 3,355.

48� 30� 28 3/4� C-Leg KCXW4830-( )-( )-( )-( )-( ) 1,762. 1,896. 3,185.

60� 30� 28 3/4� C-Leg KCXW6030-( )-( )-( )-( )-( ) 1,845. 1,995. 3,396.

72� 30� 28 3/4� C-Leg KCXW7230-( )-( )-( )-( )-( ) 1,918. 2,086. 3,552.

KCXA Pin Set Height Adjustable, Fixed Top 48� 18� 28 3/4 - 34� C-Leg KCXA4818-( )-( )-( )-( )-( ) 1,815. 1,925. 3,026.

60� 18� 28 3/4 - 34� C-Leg KCXA6018-( )-( )-( )-( )-( ) 1,882. 2,010. 3,152.

72� 18� 28 3/4 - 34� C-Leg KCXA7218-( )-( )-( )-( )-( ) 1,944. 2,088. 3,297.

48� 24� 28 3/4 - 34� C-Leg KCXA4824-( )-( )-( )-( )-( ) 1,870. 1,992. 3,167.

60� 24� 28 3/4 - 34� C-Leg KCXA6024-( )-( )-( )-( )-( ) 1,945. 2,084. 3,343.

72� 24� 28 3/4 - 34� C-Leg KCXA7224-( )-( )-( )-( )-( ) 2,011. 2,167. 3,520.

48� 30� 28 3/4 - 34� C-Leg KCXA4830-( )-( )-( )-( )-( ) 1,951. 2,084. 3,356.

60� 30� 28 3/4 - 34� C-Leg KCXA6030-( )-( )-( )-( )-( ) 2,034. 2,185. 3,564.

72� 30� 28 3/4 - 34� C-Leg KCXA7230-( )-( )-( )-( )-( ) 2,107. 2,277. 3,719.

KCXE Electric Height Adjustable, Fixedtop, Glides

60� 30� 28 3/4 - 51 3/5� C-Leg KCXE6030-(G)-( )-( )-( )-( ) 3,762. 3,928. 5,147.

72� 30� 28 3/4 - 51 3/5� C-Leg KCXE7230-(G)-( )-( )-( )-( ) 3,850. 4,034. 5,322.

Order Code

Example: KCXW7230-G-111-300-Y-111T

KCXW7230 72� x 30� rectangle, C-Leg,Fixed, Work Height

G Glides111 Black laminate300 Black molded edgebandY No grommet111T Jet Black legs

Specify:

1. Pattern number2. Locking casters or glide selection3. Top finish selection4. Edgeband selection5. Cutout option6. Leg finish

Finishes

Colored laminate finishes:Bright White, matte (suffix 118)Folkstone, matte (suffix 114)Black, matte (suffix 111)

Woodgrain laminate finishes:Medium Cherry (suffix 124)Natural Maple (suffix 125)Natural Cherry (suffix 126)Walnut (suffix 127)Light Ash (suffix 139)Warm Ash (suffix 140)Whitened Ash (suffix 141)Grey Ash (suffix 142)Classic Oak (suffix 143)Graphite Pear (suffix 144)Zebra (suffix 145)

Veneer top/edge finishes:American Walnut (suffix AW)Natural Oak (suffix ON)Fumed Oak (suffix OF)Ebonized Oak (suffix OE)

Molded edgeband finishes:Black (suffix 300)Mink (suffix 324)Innertone (suffix 386)Platinum (suffix 367)Folkstone (suffix 004)

Flat edgeband finishes:Black (suffix 111T)Mink (suffix 324T)Innertone (suffix 386T)Platinum (suffix 367T)Folkstone (suffix 004T)White (suffix 118T)

Leg/grommet finishes:Jet Black (suffix 111T)Bright White (suffix 118T) *Medium Grey (suffix 115T)Sterling (suffix 906T)

Glides/Casters:Glides (suffix G)Casters (suffix C)

Note:Casters are not available on electricheight adjustable tables.

*For tables with bright white legs, theface of the casters are white and the edgeis black. For all other leg finishes,casters are all black.

Electrical

Cutout Options: ($29 list per cutout)Tables may be specified with no cutouts(code Y). For single or double cutoutcodes, please choose your electricalmodule(s) then refer to the cutout matrixon page 598 for the proper cutout code.

Construction

Laminate and Veneer tops:Constructed of particle board substratessandwiched between laminate or woodveneer top and phenolic backer sheet, orlaminate bottom. Edges can be specifiedwith a flat ABS or molded urethane edge,or solid wood for veneer tops only.Solid wood edges can only be specifiedon tables with a wood veneer top. Edgeand top will match.

Legs:Legs are constructed using acombination of cast and extrudedaluminum. Base and upper mountingplates are cast aluminum and bolted toan extruded aluminum vertical stem.Finished in a highly durable texturedpowder coat paint.

Features

Ganging tables:Each table is fitted with a Pixelconnector on the underside of eachcorner. To join the tables, align themechanisms and slide the lever along thecurved path to engage.

Trough cutout on C-Leg OnlyTAS - Center Cutout

C-Leg tables may be specified with acenter trough cutout but only if nogrommets or box cutouts are specified onthe top.

Maintenance:See pages 31-32.

Note:Pixel tables are Greenguard certified.

KnollStudio

600 601

Marc KrusinPixel™ Table SeriesC-Leg Tables, Flip Top




KCPW Work Height, Flip Top, Casters 48� 18� 28 3/4� C-Leg KCPW4818-(C)-( )-( )-( )-( ) $1,790. $1,903. $3,089.

60� 18� 28 3/4� C-Leg KCPW6018-(C)-( )-( )-( )-( ) 1,863. 1,992. 3,218.

72� 18� 28 3/4� C-Leg KCPW7218-(C)-( )-( )-( )-( ) 1,927. 2,072. 3,365.

48� 24� 28 3/4� C-Leg KCPW4824-(C)-( )-( )-( )-( ) 1,848. 1,971. 3,230.

60� 24� 28 3/4� C-Leg KCPW6024-(C)-( )-( )-( )-( ) 1,927. 2,067. 3,413.

72� 24� 28 3/4� C-Leg KCPW7224-(C)-( )-( )-( )-( ) 1,995. 2,152. 3,590.

48� 30� 28 3/4� C-Leg KCPW4830-(C)-( )-( )-( )-( ) 1,931. 2,065. 3,421.

60� 30� 28 3/4� C-Leg KCPW6030-(C)-( )-( )-( )-( ) 2,016. 2,169. 3,635.

72� 30� 28 3/4� C-Leg KCPW7230-(C)-( )-( )-( )-( ) 2,093. 2,264. 3,790.

KCPA Pin Set Height Adjustable, Flip Top,Casters

48� 18� 28 3/4 - 34� C-Leg KCPA4818-(C)-( )-( )-( )-( ) 1,924. 2,038. 3,206.

60� 18� 28 3/4 - 34� C-Leg KCPA6018-(C)-( )-( )-( )-( ) 1,997. 2,127. 3,335.

72� 18� 28 3/4 - 34� C-Leg KCPA7218-(C)-( )-( )-( )-( ) 2,061. 2,206. 3,482.

48� 24� 28 3/4 - 34� C-Leg KCPA4824-(C)-( )-( )-( )-( ) 1,983. 2,106. 3,348.

60� 24� 28 3/4 - 34� C-Leg KCPA6024-(C)-( )-( )-( )-( ) 2,061. 2,201. 3,530.

72� 24� 28 3/4 - 34� C-Leg KCPA7224-(C)-( )-( )-( )-( ) 2,130. 2,287. 3,708.

48� 30� 28 3/4 - 34� C-Leg KCPA4830-(C)-( )-( )-( )-( ) 2,065. 2,200. 3,538.

60� 30� 28 3/4 - 34� C-Leg KCPA6030-(C)-( )-( )-( )-( ) 2,151. 2,304. 3,752.

72� 30� 28 3/4 - 34� C-Leg KCPA7230-(C)-( )-( )-( )-( ) 2,228. 2,399. 3,910.

Order Code

Example: KCPW7224-C-114-004T-Y-115T

KCPW7224 72� x 24� Work Height, FlipTop

C Locking casters114 Folkstone laminate004T Folkstone flat edgebandY No grommet115T Medium Grey legs

Specify:


Finishes







Glides/Casters:Casters (suffix C)

Note:Glides are not available on flip toptables.


Electrical


Construction



Features


Trough cutout on C-Leg OnlyTAS - Center Cutout

C-Leg tables may be specified with acenter trough cutout but only if nogrommets or box cutouts are specified onthe top.



KnollStudio

602 603

Marc KrusinPixel™ Table SeriesT-Leg Tables, Fixed Top




KTXW Work Height, Fixed Top 60� 30� 28 3/4� T-Leg KTXW6030-( )-( )-( )-( )-( ) $1,740. $1,895. $3,295.

72� 30� 28 3/4� T-Leg KTXW7230-( )-( )-( )-( )-( ) 1,824. 1,999. 3,886.

60� 36� 28 3/4� T-Leg KTXW6036-( )-( )-( )-( )-( ) 1,782. 1,949. 3,440.

72� 36� 28 3/4� T-Leg KTXW7236-( )-( )-( )-( )-( ) 1,918. 2,106. 3,882.

KTXA Pin Set Height Adjustable, Fixed Top 60� 30� 28 3/4 - 34� T-Leg KTXA6030-( )-( )-( )-( )-( ) 1,866. 2,021. 3,486.

72� 30� 28 3/4 - 34� T-Leg KTXA7230-( )-( )-( )-( )-( ) 2,038. 2,211. 3,662.

60� 36� 28 3/4 - 34� T-Leg KTXA6036-( )-( )-( )-( )-( ) 2,041. 2,208. 3,672.

72� 36� 28 3/4 - 34� T-Leg KTXA7236-( )-( )-( )-( )-( ) 2,177. 2,365. 4,111.

KTXE Electric Height Adjustable, Fixedtop, Glides

60� 36� 28 3/4 - 51 3/5� T-Leg KTXE6036-(G)-( )-( )-( )-( ) 3,813. 3,992. 5,294.

72� 36� 28 3/4 - 51 3/5� T-Leg KTXE7236-(G)-( )-( )-( )-( ) 3,905. 4,105. 5,698.

Order Code

Example: KTXA6030-C-118-300-Y-111T

KTXA6030 60� x 30� Pin Set HeightAdjustable, Fixed Top

C Locking casters111 Bright White laminate118T Bright White flat edgeY No grommet118T Bright White legs

Specify:


Finishes








Note:Casters are not available on electricheight adjustable tables.


Electrical


Construction



Features




KnollStudio

604 605

Marc KrusinPixel™ Table SeriesT-Leg Tables, Flip Top




KTPW Work Height, Flip Top, Casters 60� 30� 28 3/4� T-Leg KTPW6030-(C)-( )-( )-( )-( ) $2,330. $2,486. $3,909.

72� 30� 28 3/4� T-Leg KTPW7230-(C)-( )-( )-( )-( ) 2,423. 2,598. 4,093.

60� 36� 28 3/4� T-Leg KTPW6036-(C)-( )-( )-( )-( ) 2,422. 2,591. 4,096.

72� 36� 28 3/4� T-Leg KTPW7236-(C)-( )-( )-( )-( ) 2,564. 2,754. 4,543.

KTPA Pin Set Height Adjustable, Flip top,Casters

60� 30� 28 3/4 - 34� T-Leg KTPA6030-(C)-( )-( )-( )-( ) 2,518. 2,672. 4,080.

72� 30� 28 3/4 - 34� T-Leg KTPA7230-(C)-( )-( )-( )-( ) 2,609. 2,783. 4,263.

60� 36� 28 3/4 - 34� T-Leg KTPA6036-(C)-( )-( )-( )-( ) 2,605. 2,773. 4,280.

72� 36� 28 3/4 - 34� T-Leg KTPA7236-(C)-( )-( )-( )-( ) 2,749. 2,939. 4,715.

Order Code

Example: KTPW6036-C-114-004T-Y-115T

KTPW6036 60� x 36� rectangle, T-Leg,Flip, Work Height, Casters

C Locking casters114 Folkstone laminate004T Folkstone flat edgebandY No grommet115T Medium Grey legs

Specify:

1. Pattern number2. Locking caster or glide selection3. Top finish selection4. Edgeband selection5. Cutout option6. Leg finish

Finishes







Glides/Casters:Casters (suffix C)

Note:Glides are not available on flip toptables.


Electrical


Construction



Features




KnollStudio

606 607

Marc KrusinPixel™ Table SeriesFour Leg Tables, Fixed Top



description w d h top 99sort pattern no. laminate/ABS edge laminate/urethane edge veneer/wood edge

KFXW Work Height, Fixed Top 36� 36� 28 3/4� square KFXW3636-( )-( )-( )-( )-( ) $1,213. $1,338. $2,532.

42� 42� 28 3/4� square KFXW4242-( )-( )-( )-( )-( ) 1,333. 1,479. 2,729.

48� 48� 28 3/4� square KFXW4848-( )-( )-( )-( )-( ) 1,341. 1,498. 3,207.

48� 18� 28 3/4� rectangle KFXW4818-( )-( )-( )-( )-( ) 1,172. 1,299. 2,318.

60� 18� 28 3/4� rectangle KFXW6018-( )-( )-( )-( )-( ) 1,265. 1,410. 2,462.

72� 18� 28 3/4� rectangle KFXW7218-( )-( )-( )-( )-( ) 1,317. 1,478. 2,578.

48� 24� 28 3/4� rectangle KFXW4824-( )-( )-( )-( )-( ) 1,197. 1,333. 2,426.

60� 24� 28 3/4� rectangle KFXW6024-( )-( )-( )-( )-( ) 1,238. 1,391. 2,575.

72� 24� 28 3/4� rectangle KFXW7224-( )-( )-( )-( )-( ) 1,352. 1,525. 2,796.

48� 30� 28 3/4� rectangle KFXW4830-( )-( )-( )-( )-( ) 1,233. 1,380. 2,575.

60� 30� 28 3/4� rectangle KFXW6030-( )-( )-( )-( )-( ) 1,280. 1,446. 2,755.

72� 30� 28 3/4� rectangle KFXW7230-( )-( )-( )-( )-( ) 1,323. 1,513. 2,899.

48� 36� 28 3/4� rectangle KFXW4836-( )-( )-( )-( )-( ) 1,268. 1,426. 2,729.

60� 36� 28 3/4� rectangle KFXW6036-( )-( )-( )-( )-( ) 1,324. 1,502. 2,888.

72� 36� 28 3/4� rectangle KFXW7236-( )-( )-( )-( )-( ) 1,422. 1,622. 3,307.

Order Code

Example: KFXW6030-G-141-118T-Y-118T

KFXW6030 60� x 30� rectangle, 4-Leg,Fixed, Work Height

G Glides141 Whitened Ash laminate118T Bright White flat edgebandY No grommet118T Bright White legs

Specify:


Finishes









Electrical

Cutout Options: ($29 list per cutout)Tables may be specified with no cutouts(code Y). For single or double * cutoutcodes, please choose your electricalmodule(s) then refer to the cutout matrixon page 598 for the proper cutout code.

*Square tables may not have doublecutout codes

Construction


Legs:Legs are extruded aluminum andfinished in a highly durable texturedpowder coat paint.

Features




KnollStudio

608 609

Marc KrusinPixel™ Table SeriesY-Leg Tables, Fixed, Flip, and Fold Tops



description w d h pattern no. laminate/ABS edge laminate/urethane edge veneer/wood edge

KYXW Work Height, Fixed Top 72� 36� 28 3/4� KYXW7236-( )-( )-( )-( )-( ) $2,014. $2,202. $3,967.

84� 36� 28 3/4� KYXW8436-( )-( )-( )-( )-( ) 2,154. 2,318. 4,460.

96� 48� 28 3/4� KYXW9648-( )-( )-( )-( )-( )

KYPW Work Height, Flip Top, Casters 72� 36� 28 3/4� KYPW7236-(C)-( )-( )-( )-( ) 2,240. 2,429. 4,251.

84� 36� 28 3/4� KYPW8436-(C)-( )-( )-( )-( ) 2,398. 2,573. 4,624.

KYDW Work Height, V-Fold Top, Casters 96� 48� 28 3/4� KYDW9648-(C)-( )-( )-( )-( )

Order Code

Example: KYPW7236-C-142-367T-Y-906T

KYPW7236 36� x 72� rectangle, Y-Leg,V-Fold, Casters

C Locking casters142 Grey Ash laminate367T Platinum flat edgebandY No grommet906T Aluminum legs

Specify:

1. Pattern number2. Locking caster or glide selection3. Top finish selection4. Edgeband selection5. Cutout option6. Leg finish

Finishes






Leg/grommet finishes:Black (suffix 111T)Bright White (suffix 118T) *Medium Grey (suffix 115T)Sterling (suffix 906T)


Note:Glides are not available on flip top andV-Fold tables.


Electrical


Note:V-Fold tables can only be specified witha center-center cutout which will belocated at the center of each table toppanel.

Construction


Legs:Legs are constructed using acombination of cast and extrudedaluminum. Base and upper mountingplates are cast aluminum and bolted toan extruded aluminum vertical stem.Finished in a highly textured powdercoat paint.

Features




KnollStudio

610 611

Marc KrusinPixel™ Table SeriesColumn Leg Tables



description w d h top pattern no. laminate/urethane edge veneer/wood edge

KBXW Work Height, Fixed Top, Knife Edge 36� 28 3/4� round KBXW36D-(G)-( )-( )-( )-( ) $1,238. $3,090.

KBXL Lounge Height, Fixed Top, KnifeEdge

36� 23 1/2� round KBXL36D-(G)-( )-( )-( )-( ) 1,222. 3,081.

KBXC Counter Height, Fixed Top, KnifeEdge

36� 36� round KBXC36D-(G)-( )-( )-( )-( ) 1,250. 3,101.

KBXB Bar Height, Fixed Top, Knife Edge 36� 42� round KBXB36D-(G)-( )-( )-( )-( ) 1,264. 3,114.

KBXW Work Height, Fixed Top, Knife Edge 30� 30� 28 3/4� square KBXW3030-(G)-( )-( )-( )-( ) 1,191. 2,931.

KBXL Lounge Height, Fixed Top, KnifeEdge

30� 30� 23 1/2� square KBXL3030-(G)-( )-( )-( )-( ) 1,178. 2,920.

KBXC Counter Height, Fixed Top, KnifeEdge

30� 30� 36� square KBXC3030-(G)-( )-( )-( )-( ) 1,203. 2,941.

KBXB Bar Height, Fixed Top, Knife Edge 30� 30� 42� square KBXB3030-(G)-( )-( )-( )-( ) 1,218. 2,957.

Order Code

Example: KBXB36D-G-111-300-Y-111T

KBXB36D 36� diameter, round,counter height

G Glides111 Black laminate300 Black molded edgebandY No grommet111T Jet Black legs

Specify:

1. Pattern number2. Glide selection3. Top finish selection4. Edgeband selection5. Cutout option6. Leg finish

Finishes





Leg/grommet finishes:Jet Black (suffix 111T)Bright White (suffix 118T)Medium Grey (suffix 115T)Sterling (suffix 906T)

Glides:Glides (suffix G)

Electrical

Cutout Options: ($29 list per cutout)Tables may be specified with zero or oneround grommet.

Note:Column base tables can onlyaccommodate the KE1, KE2, and KE3electrical modules.

Construction

Laminate and Veneer tops:Constructed of an MDF core sandwichedbetween laminate or wood veneer top andphenolic backer sheet or laminatebottom.Reverse knife edge is only available in amolded urethane edge and a solid woodedge. ABS flat edge is not available.

Legs:Legs are extruded aluminum andfinished in a highly durable texturedpowder coat paint.

KnollStudio

612 613

Marc KrusinPixel™ ElectricalRound Grommet, KE1, KE2, KE3


description type power cord pattern no. .

KERG Round grommet Round Grommet n/a KERG-( ) $25.

KE1 Two receptacle module 2 Power 72� Cordset KE1200C72-( ) 236.

1 Power, 1 USB 72� Cordset KE1101C72-( ) 337.

KE2 Three receptacle module 3 Power 72� Cordset KE2300C72-( ) 246.


KE3 Four receptacle module 4 Power, 1 USB 72� Cordset KE3400C72-( ) 380.


Order Code

Example: KE1200C72-BKKE1 KE1 Electrical Module200 2 PowerC72 72� CordsetBK Black finish

Specify:

1. Pattern number2. Case Finish

Ordering Information

Case and Receptacle Finishes:

Black case with Black receptacles (suffixBK)White case with Black receptables(suffix WH)

Round Grommet Finishes:Jet Black (suffix 111T)Bright White (suffix 118T)Medium Grey (suffix 115T)Sterling (suffix 906T)

Cutout Codes:Please refer to the Grommet andElectrical Module Cutout Matrix on page598 for table compatibility and cutoutcodes.

Construction

Description:KERG: Die-cast aluminum with powdercoat matte paint finish.KE1: Die-cast aluminum and plastic withpowder coat matte paint finish.KE2: Plastic construction with asoft-touch finish.KE3: Plastic construction with integralgloss finish.

Electrical

USB:

The standard USB option that is includedin the KE1, KE2, and KE3 modules willhave (2) USB jacks per position. Forexample a KE1101C72 module includes(1) Power and (1) USB but would actuallyhave (1) Power and (2) USB jacks.

Standard USB: 1Amp

KnollStudio

616 617

Marc KrusinPixel™ ElectricalKE4, KE5, KE7, KE8



KE4 Four receptacle module 4 Power 72� Cordset KE4400C72-( ) $441.


3 Power, 1 USB 48� Pixel Link KE4301L48-( ) 549.





KE5 Four receptacle module 4 Power 72� Cordset KE5400C72-BK 619.

3 Power, 1 High Speed USB 72� Cordset KE5301C72-BK 605.

3 Power, 1 High Speed USB 48� Pixel Link KE5301L48-BK 632.





KE7 Four receptacle module with clampmount

4 Power 72� Cordset KE7400C72-BK 620.



KE8 Three receptacle module 3 Power 72� Cordset KE8300C72-BK 469.

3 Power 48� Pixel Link KE8300L48-BK 497.

3 Power 60� Pixel Link KE8300L60-BK 499.




Order Code

Example: KE8300L60-BKKE8 KE8 Electrical Module300 3 PowerL60 60� Pixel LinkBK Black finish

Specify:




Black case with Black receptacles (suffixBK)White case with Black receptables(suffix WH) *

*Not available on KE5, KE7, KE8


Note:Please refer to page 622 of the price listfor Pixel Link Starter Boxes and Cables.

Pixel Link

Pixel Link is a non-sequential powersystem that allows users to ‘‘daisy chain’’multiple power centers together. PixelLink’s ‘‘brain’’ allows users to connect upto 8 power/data centers off of one infeed.The smart LED indicators will illuminategreen when you’re connected and readyto plug in. A red light means that you’velinked too many units.

Construction

Description:KE4: Die-cast aluminum with powdercoat matte paint finish.KE5: Aluminum case with powder coatmatte paint finish.KE7: Aluminum case with powder coatmatte paint finish. *KE8: Aluminum case with powder coatmatte paint finish.

*KE7 Electrical Module is compatiblewith flat edge tops only. This mount willnot work with knife edge tables.

Electrical

USB:

The standard USB option that is includedin the KE4 module will have (2) USBjacks per position. For example aKE4202C72 module includes (2) Powerand (2) USB but will actually have (2)Power and (4) USB jacks.

The High Speed USB option that isincluded in the KE5, KE7, and KE8modules will only have (1) USB jack perposition. For example a KE5202C72module includes (2) Power and (2) HighSpeed USB and will have (2) Power and(2) High Speed USB jacks.

Standard USB: 1 AmpHigh SPeed USB: 2.1 Amps

KnollStudio

618 619

Marc KrusinPixel™ ElectricalKE6: C-Leg Trough Only



KE6 Four receptacle module 3 Power, 1 High Speed USB 72� Cordset KE6301C72-BK $715.



Order Code

Example: KE6301C72KE6 KE6 Electrical Module301 3 Power, 1 High Speed USBC72 72� CordsetBK Black finish

Specify:




Black case with Black receptacles (suffixBK)

Note:KE6 Electrical Modules are onlyavailable on C-Leg tables with troughcutout.


Note:Please refer to page 622 of the price listfor Pixel Link Starter Boxes and Cables.

Pixel Link


Construction

Description:KE6: Aluminum case with powder coatmatte paint finish.

Electrical

USB:

The High Speed USB option that isincluded in the KE6 module will onlyhave (1) USB jack per position. Forexample a KE6301C72 module includes(3) Power and (1) High Speed USB andwill have (3) Power and (1) High SpeedUSB jacks.

High SPeed USB: 2.1 Amps

KnollStudio

620 621

Marc KrusinPixel™ ElectricalPixel™ Link Starter Boxes and Jumper Cables



KLJ Jumper cable Jumper cable 12� KLJ12 $99.

Jumper cable 24� KLJ24 104.




KLSC Starter box Starter box 72� KLSC72 498.

Starter box 120� KLSC120 513.

Order Code

Example: KLSC120KLSC Pixel Link Starter Box120 120� power cord

Specify:1. Pattern number2. Cord length

Pixel Link



How to Specify Pixel Link PowerSystem:

Example 1:(24) 60� x 24� Pixel C-Leg Tables withconsistent cutout positions on all tables.Need (3) rows of (8) tables.

Starter boxes can only accommodate amaximum of (8) electrical modules +jumper cables (do not count the starterbox itself). For this application, we willneed to specify (3) starter boxes (one foreach row) since no jumpers are required.Choose the length cord that matches thedistance to your power source.

Electrical Specifications:(24) KE4 Pixel Electrical Module -KE4301L60BK(3) Pixel Link Starter Box with 72�Cordset - KLSC72

Example 2:(24) 72� x 30� Pixel C-Leg Tables withconsistent cutout positions on all tables.Need (3) rows of (8) tables.

Here we are going to show the sameapplication with larger tables. Again, wehave used (24) KE4 electrical moduleswith a 60� Pixel Link connector. Sinceour tables are 72� we will need to add12� jumper cables to our specification toaccommodate the added length.

Since we now have two components pertable (electrical module + jumper cable)we will need a starter box for every (4)tables. In this case we will need (6)starter boxes. An additional powersource will need to be provided for eachrow. Choose the length cord thatmatches the distance to each powersource.

Electrical Specification:(24) KE4 Pixel Electrical Module -KE4301L60BK(24) 12� Pixel Jumper Cable - KLJ12(6) Pixel Link Starter Box with 72�Cordset - KLSC72

KnollStudio

622 623

Documents

Marc Krusin KnollStudio Pixel™ Table Series Grommet and ... · Marc Krusin Pixel™ Table Series C-Leg Tables, Flip Top Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold