Upload
dhanis-paramaguru
View
221
Download
0
Embed Size (px)
Citation preview
8/9/2019 Manufacturing Technology- JOINING
1/31
1
Joining Processes
http://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
2/31
8/9/2019 Manufacturing Technology- JOINING
3/31
'
)oining * The B+" icture
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
4/31
-
usion %elding
/efinition: melting together and coalescing of
materials using chemical or electrical
means.
Types of fusion welding processes:
0 (onsumable electrode arc welding
0 on!consumable electrode arc welding
0 igh!energy!beam welding
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
5/31
3
(haracteristics of usion %elding
rocessesTABLE 27.1
Joining process Operation Advantage
Skill level
required
Welding
position
Current
type Distortion*
Cost of
equipment
Shielded metal-arc Manual Portable and
flexible
High All ac, dc 1 to 2 Low
Submerged arc Automatic High
deposition
Low to
medium
Flat and
horizontal
ac, dc 1 to 2 Medium
Gas metal-arc Semiautomatic
or automatic
Most metals Low to
high
All dc 2 to 3 Medium to
high
Gas tungsten-arc Manual or
automatic
Most metals Low to
high
All ac, dc 2 to 3 Medium
Flux-cored arc Semiautomatic
or automatic
High
deposition
Low to
high
All dc 1 to 3 Medium
Oxyfuel Manual Portable and
flexible
High All — 2 to 4 Low
Electron-beam,
Laser-beam
Semiautomatic
or automatic
Most metals Medium
to high
All — 3 to 5 High
* 1, highest; 5, lowest.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
6/31
4
Oxyfuel!"as %elding
0 (an be used for most ferrous and non ferrousmetals up to a thic5ness of 4 mm.
0 2 types of combustion occur:rimary combustion:
(22 6 O2 2(O 6 2 6 heat
&econdary combustion:
2(O 6 2 6 1.2O2 2(O2 62O 6 heat
7ses fuel gas 8normally acetylene9 combined with oxygen to produce
flame. lame proides heat 8up to '';;o(9 to melt metals at the
8/9/2019 Manufacturing Technology- JOINING
7/31
=
Oxyacetylene lames 7sed
in %elding
Three basic types of oxyacetylene flames used in oxyfuel!gas welding and cutting operations: 8a9neutral flame> 8b9 oxidi?ing flame> 8c9 carburi?ing, or reducing, flame. The gas mixture in 8a9 is
basically eual olumes of oxygen and acetylene.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
8/31
@
iller metals in oxyfuel!gas welding
0 iller metals 8filler rods9 are used to supply additional metal tothe weld ?one
0 iller rods are normally coated with flux to: * suppress oxidation on the welded parts by producing a gaseous shieldaround the weld ?one
* /issole and remoe oxides
* elp deelop slag that protects the molten metal against oxidation
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
9/31
A
Torch 7sed in
Oxyacetylene %elding
8a9 "eneral iew of and 8b9 cross!section of a torch used inoxyacetylene welding. The acetyleneale is opened first> the gas is lit
with a spar5 lighter or a pilot light>then the oxygen ale is opened andthe flame ad
8/9/2019 Manufacturing Technology- JOINING
10/31
1;
$rc %elding rocesses
There are 2 types of arc welding processes:
1. on!consumable electrode * xamples: "as tungsten arc welding, lasma arc welding,
$tomic hydrogen welding
* &hielding gas is supplied to preent oxidation at weld ?one
* ormally use direct current. olarity depends on type ofelectrode, type of wor5piece.
2. (onsumable electrode * xamples: &hielded metal!arc welding, &ubmerged!arc welding,
"as metal!arc welding,
Heat is generated from the electric arc produced between the tip of
an electrode and the workpiece. Temp generated is about 30,000oC
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
11/31
11
"as Tungsten!$rc %elding
8"T$%CT+"9eatures:
0&hielding gas is normally argonChelium
0"ood for thin metals
0(an be used on a wide ariety of metalsincluding aluminum, magnesium, titanium,refractory metals.
0ortable euipment0"ood uality surface finish
07ses $( current at 3;; $ or /( current at
2;; $> @!1; 5%
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
12/31
12
"as Tungsten!$rc %elding
8"T$%CT+"9
The gas tungsten!arc welding process, formerly5nown as T+" 8for tungsten inert gas9 welding.
uipment for gas tungsten!arc weldingoperations. Source: $merican %elding&ociety.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
13/31
1'
&hielded #etal!$rc
%elding 8$%9Features
0 Dery common industrial 8construction, shipbuilding, pipeline, etc.9welding process
0 $rc is generated by touching the tip of electrode and withdrawing ituic5ly to maintain the arc
0 eat generated by the arc melts the electrode tip, its coating and thewor5piece metal
0 The weld consists of the wor5piece metal, electrode metal and coatingmaterial.
0 The coating material deoxidi?es the weld area and proides a shielding
gas to inhibit oxidation0 &lag must be cleaned as it can cause corrosion
0 7ses $( or /( current, 3;!';; $> up to 1;5%
0 &uitable for wor5piece thic5ness of '!1A mm
0 &imple process.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
14/31
1-
&hielded #etal!$rc
%elding 8$%9
&chematic illustration of the shielded metal!arcwelding process. $bout 3;E of all large!scaleindustrial welding operations use this process.
&chematic illustration of the shielded metal!arcwelding operations 8also 5nown as stic5 welding, because the electrode is in the shape of a stic59.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
15/31
13
"as #etal!$rc %elding
8"#$%C#+"9
eatures:0 The consumable electrode is fed automatically through a no??le
into the weld arc using a wire!feed drie motor.
0 lectrode contains deoxidi?ers to preent oxidation of molten!weld puddle.
0 $rgonCheliumCcarbon dioxide shielding gas is used to protectweld area against oxidation.
0 Felatiely low temperature generated. Therefore suitable forthin sheets of less than 4mm.
0 &uitable for ferrousCnon!ferrous metals. (ommonly used onmetal fabrication industry.
0 &imple operation, low s5ill reuired, ersatile process,economical, easily automated, 2 x productiity of $%.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
16/31
14
"as #etal!$rc %elding
8"#$%C#+"9
&chematic illustration of thegas metal!arc welding process,formerly 5nown as #+" 8formetal inert gas9 welding.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
17/31
1=
uipment 7sed in "as
#etal!$rc %elding
8"#$%C#+"9
Basic euipment used in gasmetal!arc welding operations.
Source: $merican %elding&ociety.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
18/31
1@
lectrodes for $rc %elding
0 lectrodes for consumable arc!welding processesare classified according to: * &trength of the deposited weld metal
* (urrent 8$( or /(9 * Type of coating
0 lectrodes are classified by numbers and letters or by colour code.
0 &pecifications for electrodes and filler metals are published by the $merican %elding &ociety 8$%&9and the $merican ational &tandards +nstitute8$&+9.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
19/31
1A
/esignations for #ild &teel
(oated lectrodesTABLE 27.2
The prefix “E” designates arc welding electrode.
The first two digits of four-digit numbers and the first three digits of five-digit numbersindicate minimum tensile strength:
E60XX 60,000 psi minimum tensile strength
E70XX 70,000 psi minimum tensile strength
E110XX 110,000 psi minimum tensile strength
The next-to-last digit indicates position:
EXX1X All positions
EXX2X Flat position and horizontal fillets
The last two digits together indicate the type of covering and the current to be used.
The suffix (Example: EXXXX-A1) indicates the approximate alloy in the weld deposit:
—A1 0.5% Mo
—B1 0.5% Cr, 0.5% Mo
—B2 1.25% Cr, 0.5% Mo
—B3 2.25% Cr, 1% Mo
—B4 2% Cr, 0.5% Mo—B5 0.5% Cr, 1% Mo
—C1 2.5% Ni
—C2 3.25% Ni
—C3 1% Ni, 0.35% Mo, 0.15% Cr
—D1 and D2 0.25–0.45% Mo, 1.75% Mn
—G 0.5% min. Ni, 0.3% min. Cr, 0.2% min. Mo, 0.1%min. V,
1% min. Mn (only one element required)
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
20/31
2;
lectrode coatings
0 lectrode coatings consist of silicate binders,oxidesCcarbonatesCfluoridesCmetal alloysCcellulose.
0 lectrode seres to: * &tabili?e the arc
* "enerate gasses to protect weld area against oxidation
* (ontrol rate of melting of electrode
* $ct as a flux to preent formation of oxides, nitrides atthe molten!weld pool
* $dd alloying elements to the weld ?one to improe theintegrity of the weld
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
21/31
21
The !eld Joint, "ualit# and Testing
0 Three distinct ?ones can be identified in a typical weld
8/9/2019 Manufacturing Technology- JOINING
22/31
22
The !eld Joint, "ualit# and Testing
Solidifications of the weld metal
0 $fter the application of heat and the introduction of the filler metal8if any9 into the weld ?one, the weld
8/9/2019 Manufacturing Technology- JOINING
23/31
2'
&howing the "rain structure in a 8a9 deep weld and 8b9 shallow weld.
ote that the grains in the solidified weld metal are perpendicular to
their interface with the base metal. 8c9 %eld bead on a coldrolled
nic5el strip produced by a laser beam. 8d9 #icrohardness 8D9
profile across a weld bead.
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
24/31
2-
The !eld Joint, "ualit# and Testing
Heat-affected zone0 The heat-affected zone 8$G9 is within the base metal
itself.
0 +t has a microstructure different from that of the base
metal prior to welding, because it has been sub
8/9/2019 Manufacturing Technology- JOINING
25/31
23
%eld Huality
%eld uality is affected by the presence of discontinuities. Types of
discontinuities:1. orosity
* /ue to: gasses released, chemical reactions during welding, contaminants
* reention by: select electrodesCfiller metals carefully, preheat weld area, cleancontaminants, reduce welding speed
2. &lag inclusions * /ue to: trapped oxidesCfluxesCcoatings, contaminants from enironment
* reention by: (lean weld!bead before next layer is deposited, roidesufficient shielding gas, roper design of
8/9/2019 Manufacturing Technology- JOINING
26/31
24
%eld Huality
-. %eld profile
3. (rac5s
* /ue to: temperature gradient causing thermal stress, etc.
* reention by: improe
8/9/2019 Manufacturing Technology- JOINING
27/31
http://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
28/31
2@
%eldability of #etals
errous metals:
0 lain carbon steel: excellent 8low (!steel9, medium
8medium (!steel9, poor 8high (!steel9
0 Low!alloy steel: medium
0igh alloy steel: good under well!controlled conditions
0 &tainless: arying 8differ by process9
0 (ast iron: arying 8differ by process9
on ferrous metals:
0 $luminum alloys: good at high rate of heat input> reuireshielding gas, absence of moisture
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
29/31
2A
Testing of welds
/estructie testing0 Tension test
0 Tension!shear test
0 Bend test
0 acture toughness test
ondestructie testing
0 Disual inspection
0Fadiography
0 #agnetic particle
0 Liuid penetrant
0 7ltrasonic
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
30/31
';
)oint design
&
http://www.superxowners.com/history/ehpics/factory/fact1.htmhttp://www.superxowners.com/history/ehpics/factory/fact1.htm
8/9/2019 Manufacturing Technology- JOINING
31/31
'1
&ummary1. usion welding is melting together and coalescing of
materials using chemical or electrical means.
2. usion welding may be achieed ia chemical or
electrical means
'. Oxyfuel!gas welding inoles generating heat by
combustion of a fuel gas with oxygen
-. $rc welding inoles generating heat from an electrical
arc
3. /ifferent types of welding processes proide different
weld ualities, incur different costs, and reuire arious
leels of s5ills.
4. /ifferent metals hae arying weldabilities with low
carbon steels proiding the best weldability
=. /estructie and non!destructie tests can be used to
i t th i t it f ld
http://www.superxowners.com/history/ehpics/factory/fact1.htm