Embed Size (px)
Citation preview
Drill holes fast, where others fail.
Tractor Mounted Posthole DiggerTM 48-HTL-C1, C2, C3 (screw type leveling brace)
TM 48-HTL-GRS-C1, C2, C3 (dual cylinder levelers)
Fits Category 1, 2, 3 Tractors with 3-Point Hook-Up and PTO drive
DRILLS SOLID ROCK
H Series Drill UnitsModel H-200 Model H-300 Model H-350
Model HD-400 Model HD-500THE BENCHMARK OF THE INDUSTRY
M Series Auger UnitsModel M-200 Model M-300 Model M-350
EXTRAORDINARY BELLTEC QUALITYREPLACING BRAND X
Manufacturers of Quality Drilling Equipment
The Unique Patented Drilling System
Dependable, Durable Planetary HydraulicAuger Drives
NC Series Auger DrivesModel NC-150 Model NC-200 Model NC-300PLANETARY DRIVE @ CHAIN DRIVE PRICES
Backhoe & Mini Excavator SwivelsModels BH-400 thru BH-413
Front End Loader Mounting Bracket . . . . . . . . LB410
Skid Steer Mounting BracketsQT-100 Quick Attach Frame for skid steers w/universal hitch
QT-200 Quick Attach Frame for mini-skid steers
POST HOLE AUGERS
Post Office Box 270 • 2057 Commerce • Belton, Texas 76513Toll Free 1-800-242-9410 • Fax 254-939-9408 • www.belltec.net
Augers
Drill holes fast, where others fail.
Belltec Industries, Inc. is represented by and sold through:
SDA RSA RAD SRA BD PUFF
Style OAL Dia. Features Soil Conditions Drive
SDA 48 & 54 6 to 36 Bolt-on Teeth Moderate H
RSA 48 4.5 to 36 Pengo Teeth Difficult H
SSA 36 4.5 to 18 Pengo Teeth Difficult TM48
RAD 48 4.5 to 36 Carbide Bullet Toughest H
RAD 36 4.5 to 18 Carbide Bullet Toughest TM48
SRA 36 & 48 4.5 to 9 Carbide Bullet Toughest H & TM48
BD 36 6, 9, 12 Rock Teeth Solid Rock TM48
BD 48 6, 9, 12 Rock Teeth Solid Rock H
Puff 36 2” Carbide Pilot Solid Rock H & TM48
Note: All H, M & NC Series are 2” Hex Drives, TM-48 is a 2” Square Drive. Dimensions for OAL(overall length) and Dia. (diameter) are in inches.
�
POST HOLE AUGERS
Drill holes fast, where others fail.
Belltec Augers
POST HOLE AUGERS
RADRAD STYLE AUGERS FOR DRILLING IN THE TOUGHEST CONDITIONS, SOLID ROCK, CONCRETE,FRACTURED ROCK, FROZEN GROUND AND COMPACTED SOILS.
FEATURES: AVAILABLE IN 48” LENGTH FOR HYDRAULIC DRIVES AND 36” FOR TM-488” TO 36” DIAMETERSHEAVY DUTY 3/4” THICK BORING HEADCARBIDE BULLET STYLE TEETH3/8” THICK FLIGHTING
Post Office Box 270 • Belton, Texas 765131-800-242-9410 • Fax 254-939-9408www.belltec.net • [email protected]
Belltec Augers
RSARSA STYLE AUGERS FOR DRILLING IN DIFFICULT GROUND CONDITIONS, COMPACTED SOILS,HEAVY CLAY, ASPHALT, FROZEN GROUND, AND FRACTURED ROCK.
FEATURES: AVAILABLE IN 48” LENGTH FOR HYDRAULIC DRIVES AND 36” FOR TM-484.5” TO 36” DIAMETERSCAST BORING HEADHARDENED DRIVE IN TEETHHARDENED FISHTAIL PILOT3/8” THICK FLIGHTING
SDASDA STYLE AUGERS FOR STANDARD TO MODERATE DRILLING CONDITIONS, DIRT CLAY ANDSMALL FRACTURED ROCK.
FEATURES: AVAILABLE IN 48” AND 54” OVER ALL LENGTHS6” TO 36” DIAMETERSFABRICATED BORING HEADHARDENED BOLT ON TEETHHARDENED FISHTAIL PILOT3/8” THICK FLIGHTING
PUFFPUFF STYLE AUGERS FOR DRILLING T-POST HOLES IN DIRT, CLAY, COMPACTED SOILS, FROZENGROUND, FRACTURED ROCK, SOLID ROCK AND CONCRETE.
FEATURES: REPLACEABLE 2” CARBIDE CUTTING HEAD1-5/8” SOLID STRESS PROOF SHAFT
SRASRA STYLE AUGERS FOR DRILLING IN THE TOUGHEST CONDITIONS, SOLID ROCK, CONCRETE,FRACTURED ROCK, FROZEN GROUND AND COMPACTED SOILS.
FEATURES: AVAILABLE IN 48” LENGTH FOR HYDRAULIC DRIVES AND 36” FOR TM-484.5” TO 9” DIAMETERSHEAVY DUTY 3/4” THICK BORING HEADCARBIDE BULLET STYLE TEETH3/8” THICK FLIGHTING
BDBD STYLE AUGERS FOR DRILLING IN SOLID ROCK CONDITIONS, SOLID ROCK AND CONCRETEWITHOUT REBAR.
FEATURES: AVAILABLE IN 48” LENGTH FOR HYDRAULIC DRIVES AND 36” FOR TM-486”, 9”, AND 12” DIAMETERSHEAVY DUTY CAST BORING HEADTRIPLE FLIGHTED3/8” FLIGHTINGEASY CHANGE ROCK TEETH
POST HOLE AUGERS
Drill holes fast, where others fail.
Belltec NC Series Auger Drives2 Year Warranty
NC Series auger drives are designed with a planetary gearbox to eliminate chain and sprocketreductions found on drives in this class and price range.
The rugged NC Series Drive will give better service since all rotating parts are sealed away fromharmful dirt and debris, and fully running in oil.
These compact units are designed to give exceptional service under average digging conditions.The auger rotation can be reversed to free it if it becomes caught under an obstruction.
POST HOLE AUGERS
NC Series Auger DrivesThe Belltec NC Series hydraulic auger drives are available in three models for systems operatingbetween 6 and 30 GPM and 2000 to 3000 PSI. The NC Series units are ideal for light to moderatedrilling applications.
No Case Drain Hoses RequiredFeatures:• Planetary gear reduction • Heavy-duty bushings in swivel• Reversible hydraulic motor • 2” Hex output shaft• Solid steel 1 1/4” swivel pins
MODEL NC-150 ORDER NUMBER 113025MAXIMUM OUTPUT TORQUE ............................................................................................................................................1419 FT-LBSRECOMMENDED FLUID FLOW ..............................................................................................................................................6-15 GPMMAXIMUM PRESSURE-CONTINUOUS ....................................................................................................................................3000 PSIRECOMMENDED MAX AUGER DIA-ROCK ..........................................................................................................................18 INCHESRECOMMENDED MAX AUGER DIA-DIRT ............................................................................................................................18 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM
6 398 5210 6512 7814 9115 104
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft
2000 9462500 11823000 1419
MODEL NC-200 ORDER NUMBER 113026MAXIMUM OUTPUT TORQUE ............................................................................................................................................1777 FT-LBSRECOMMENDED FLUID FLOW ............................................................................................................................................10-20 GPMMAXIMUM PRESSURE-CONTINUOUS ....................................................................................................................................3000 PSIRECOMMENDED MAX AUGER DIA-ROCK ..........................................................................................................................30 INCHESRECOMMENDED MAX AUGER DIA-DIRT ............................................................................................................................30 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM
10 5212 6214 7316 8318 9320 104
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft
2000 11852500 14813000 1777
MODEL NC-300 ORDER NUMBER 113027MAXIMUM OUTPUT TORQUE ............................................................................................................................................2600 FT-LBSRECOMMENDED FLUID FLOW ............................................................................................................................................15-30 GPMMAXIMUM PRESSURE-CONTINUOUS ....................................................................................................................................3000 PSIRECOMMENDED MAX AUGER DIA-ROCK ..........................................................................................................................36 INCHESRECOMMENDED MAX AUGER DIA-DIRT ............................................................................................................................36 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM
15 5318 6320 7024 8428 10130 108
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft
2000 17482500 21853000 2623
Post Office Box 270 • Belton, Texas 765131-800-242-9410 • Fax 254-939-9408www.belltec.net • [email protected]
POST HOLE AUGERS
Drill holes fast, where others fail.
Belltec H Series Auger Drives5 Year Warranty
POST HOLE AUGERS
Belltec H Series Auger DrivesThe Belltec H Series hydraulic auger drives are available in three models for systems operating between 10 and 35 GPMand 2000 to 3000 PSI. The H Series planetary outperforms and has heavier components than any of its competitors. Firsttubular frame on the market with the largest and strongest cradle. Mounting frame mounts to all modern skid loaders withthe universal attach system. The H Series units are ideal for the toughest drilling applications from dirt to solid rock and con-crete when paired with the correct H Series auger.
No Case Drain Hoses RequiredFeatures:• Heaviest in Class Planetary Gearbox with No Snaps Rings • Heavy Duty Hexagon Housing• Heavy Duty Nut Prevents Shaft Pull Out • 2” Hex Output Shaft• Heavy Duty Motors with High Pressure Seal
MODEL H-200 ORDER NUMBER 113001MAXIMUM OUTPUT TORQUE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 FT-LBSRECOMMENDED FLUID FLOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20 GPMMAXIMUM PRESSURE-CONTINUOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 PSIRECOMMENDED MAX AUGER DIA-ROCK. . . . . . . . . . . . . . . . . . . . . . . . 24 INCHESRECOMMENDED MAX AUGER DIA-DIRT. . . . . . . . . . . . . . . . . . . . . . . . . 30 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM10 4812 5514 6416 7318 8220 92
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft2000 13392200 14802400 16072600 17402800 18743000 2008
MODEL H-300 ORDER NUMBER 113014MAXIMUM OUTPUT TORQUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 FT-LBSRECOMMENDED FLUID FLOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-30 GPMMAXIMUM PRESSURE-CONTINUOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 PSIRECOMMENDED MAX AUGER DIA-ROCK . . . . . . . . . . . . . . . . . . . . . . . . 36 INCHESRECOMMENDED MAX AUGER DIA-DIRT . . . . . . . . . . . . . . . . . . . . . . . . . 36 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM15 4718 5622 6826 8128 8730 93
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft2000 19582200 20662400 23502600 25462800 27423000 2937
MODEL H-350 ORDER NUMBER 113016MAXIMUM OUTPUT TORQUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 FT-LBSRECOMMENDED FLUID FLOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-30 GPMMAXIMUM PRESSURE-CONTINUOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 PSIRECOMMENDED MAX AUGER DIA-ROCK . . . . . . . . . . . . . . . . . . . . . . . . 36 INCHESRECOMMENDED MAX AUGER DIA-DIRT . . . . . . . . . . . . . . . . . . . . . . . . . 36 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM20 5124 6226 6728 7230 7735 90
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft2000 23882500 29853000 3582
Exclusive bolt on 2” hex output shaftsignificantly reduces costly down time and
repair costs if a shaft is bent or broken
Extra large step with non-skid for entering andexiting skid loaders and owners manual canister
so the manual stays with the unit at all times
Large cradle holds drive in place and allows forbetter visibility while in transport position
Post Office Box 270 • Belton, Texas 765131-800-242-9410 • Fax 254-939-9408www.belltec.net • [email protected]
POST HOLE AUGERS
Drill holes fast, where others fail.
Belltec Max M Series Auger Drives4 Year Warranty
POST HOLE AUGERS
POST HOLE AUGERS
Post Office Box 270 • Belton, Texas 765131-800-242-9410 • Fax 254-939-9408www.belltec.net • [email protected]
Belltec Max M Series Auger DrivesThe Belltec Max Series hydraulic auger drives are available in three models for systems operating between 10 and 35 GPMand 2000 to 3000 PSI. The Max Series planetary outperforms and has heavier components than any of its competitors. Firsttubular frame on the market with the largest and strongest cradle. Mounting frame mounts to all modern skid loaders withthe universal attach system. The Max Series units are ideal for all drilling applications from dirt to solid rock and concretewhen paired with the correct H Series auger.
No Case Drain Hoses RequiredFeatures:• Heaviest in Class Planetary Gearbox with No Snaps Rings • Heavy Duty Hexagon Housing• Heavy Duty Nut Prevents Shaft Pull Out • 2” Hex Output Shaft• Heavy Duty Motors with High Pressure Seal
MODEL M-200 ORDER NUMBER 113028MAXIMUM OUTPUT TORQUE ............................................................................................................................................2000 FT-LBSRECOMMENDED FLUID FLOW ............................................................................................................................................10-20 GPMMAXIMUM PRESSURE-CONTINUOUS ....................................................................................................................................3000 PSIRECOMMENDED MAX AUGER DIA-ROCK ..........................................................................................................................24 INCHESRECOMMENDED MAX AUGER DIA-DIRT ............................................................................................................................30 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM
10 4812 5514 6416 7318 8220 92
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft
2000 13392200 14802400 16072600 17402800 18743000 2008
MODEL M-300 ORDER NUMBER 113029MAXIMUM OUTPUT TORQUE ............................................................................................................................................3000 FT-LBSRECOMMENDED FLUID FLOW ............................................................................................................................................15-30 GPMMAXIMUM PRESSURE-CONTINUOUS ....................................................................................................................................3000 PSIRECOMMENDED MAX AUGER DIA-ROCK ..........................................................................................................................36 INCHESRECOMMENDED MAX AUGER DIA-DIRT ............................................................................................................................36 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM
15 4718 5622 6826 8128 8730 93
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft
2000 19582200 20662400 23502600 25462800 27423000 2937
MODEL M-350 ORDER NUMBER 113030MAXIMUM OUTPUT TORQUE ............................................................................................................................................3000 FT-LBSRECOMMENDED FLUID FLOW ............................................................................................................................................15-30 GPMMAXIMUM PRESSURE-CONTINUOUS ....................................................................................................................................3000 PSIRECOMMENDED MAX AUGER DIA-ROCK ..........................................................................................................................36 INCHESRECOMMENDED MAX AUGER DIA-DIRT ............................................................................................................................36 INCHES
OUTPUT SPEEDFLOW SPEEDGPM RPM
20 5124 6226 6728 7230 7735 90
OUTPUT TORQUEPRESSURE TORQUEPSI Lb-Ft
2000 23882200 29852400 3582
POST HOLE AUGERS
Prices Effective as of 2-14
POST HOLE AUGERS
Prices Effective as of 2-14
www.belltec.net | P. O. Box 270 | Belton, TX 76513 | sales: 1-800-242-9410 | fax: 254-939-9408
Mounts
Hose Kits & Couplers
NC SERIES: Ideal for light to moderate drilling applications.
H SERIES: Ideal for the toughest drilling applications.
M SERIES: Ideal for heavy to moderate drilling applications.
HTLS SERIES
QT Series: Mounts for Skid Steers and Track Machines Tractor Loader Mounts
PG 2
Drives, Mounts, Hoses & Augers are all sold separately.
*7K & 10K Drives have 2 1/2” Hex Output Shaft—Augers sold on page 6
Part Number Description List Price
113025 NC150 (6-15 GPM) $1405.00
113026 NC200 (10-20 GPM) $1455.00
113027 NC300 (15-30 GPM) $1505.00
Part Number Description List Price
113001 H200 (10-20 GPM) $2285.00
113014 H300 (15-30 GPM) $2385.00
113016 H350 (20-35 GPM) $2485.00
Part Number Description List Price
QT101 Universal Skid Steer offset to Right $435.00
QT103 Euro/Global Mount offset to Right $585.00
LB410 Bolt on Loader Mount $265.00
Part Number Description List Price
113078 HTLS 6K (6-15 GPM) $2895.00
113082 HTLS 7K (10– 20 GPM) $3495.00
113077 *HTLS 10K (15-30 GPM) $3695.00
Call office for part numbers & availability
Mounts with less than 3” Pin $395.00
Mounts with greater than 3” Pin $675.00
BH Series: Backhoe & Excavator Mounts
Part Number Description List Price
113028 M200 (10-20 GPM) $1885.00
113029 M300 (15-30 GPM) $1985.00
113030 M350 (20-35 GPM) $2185.00
Part Number Description List Price
QT100 Universal Skid Steer Frame $435.00
QT200 Mini-Skid Steer Mount $300.00
QT1400 1400 lb Ballast Hitch $2995.00
QT1900 1900 lb Ballast Hitch $3895.00
QT2400 2400 lb Ballast Hitch $4595.00
Part Number Description List Price
111385 1/2” x 96” Hose Kit with Flush Face Couplers $245.00
111383 1/2” x 96” Hose Kit w/NO Couplers 10MB Ends $175.00
111381 1/2” x 25’ Hose Kit for Tractor w/Pioneer Couplers $325.00
111386 Female Flush Face Coupler with 10MB $115.00
111387 Male Flush Face Coupler with 10 MB $80.00
Effective 02/13/2014 - Prices & Specifications subject to change without notice
Hydraulic Auger Drives
POST HOLE AUGERS
Prices Effective as of 2-14
POST HOLE AUGERS
Prices Effective as of 2-14
POST HOLE AUGERS
Prices Effective as of 2-14
POST HOLE AUGERS
Prices Effective as of 2-14
POST HOLE AUGERS
www.belltec.net | P. O. Box 270 | Belton, TX 76513 | sales: 1-800-242-9410 | fax: 254-939-9408
PG 7
Length Part Number List Price Part Number List Price
24” EH200024F $190.00 EH200024 $220.00
36” EH200036F $235.00 EH200036 $260.00
48” EH200048F $285.00 EH200048 $310.00
60” EH200060F $340.00 EH200060 $365.00
72” EH200072F $390.00 EH200072 $415.00
Length Part Number List Price Part Number List Price
24” ER200024F $160.00 ER200024 $180.00
36” ER200036F $185.00 ER200036 $205.00
48” ER200048F $210.00 ER200048 $230.00
60” ER200060F $235.00 ER200060 $275.00
72” ER200072F $270.00 ER200072 $295.00
2”
Round Extensions
Fixed Variable
Fixed Variable
2”
Hex Bar Extensions
Length Part Number List Price Part Number List Price
24” ER250024FB $195.00 ER250024 $225.00
36” ER250036FB $235.00 ER250036 $265.00
48” ER250048FB $275.00 ER250048 $305.00
60” ER250060FB $315.00 ER250060 $345.00
72” ER250072FB $365.00 ER250072 $395.00
2.5”
Round Extensions
Fixed Variable
Effective 02/13/2014 - Prices & Specifications subject to change without notice
SINGLE ROW DOUBLE ROW
Length Part Number List Price Part Number List Price
72” EH250072F $1095.00 EH250072 $1195.00
Fixed Variable
2.5”
Prices Effective as of 2-14
POST HOLE AUGERS
www.belltec.net | P. O. Box 270 | Belton, TX 76513 | sales: 1-800-242-9410 | fax: 254-939-9408
PG 8 Effective 02/13/2014 - Prices & Specifications subject to change without notice
Length Part Number List Price Part Number List Price
24” EHHD200024 $325.00 - -
36” EHHD200036 $390.00 EHHD250036 $670.00
48” EHHD200048 $405.00 EHHD250048 $740.00
60” EHHD200060 $425.00 EHHD250060 $815.00
72” EHHD200072 $460.00 EHHD250072 $885.00
84” EHHD200084 $495.00 EHHD250084 $960.00
96” EHHD200096 $530.00 EHHD250096 $1030.00
120” EHHD200120 $600.00 EHHD250120 $1170.00
144” EHHD200144 $670.00 EHHD250144 $1315.00
180” - - EHHD250180 $1530.00
2” Hex - Heavy Duty 2-1/2 - Hex Heavy Duty
Heavy Duty Hex
Extensions
Part Number Description List Price
AH200R200 2” Hex Female to 2” Round Male $160.00
AH200R250 (Specify bolt Size) 2” Hex Female to 2-1/2” Round Male $160.00
AH200R250D (1/2” Bolt Hole) 2” Hex Female to 2-1/2” Round Make $160.00
AH200SQ200 2” Hex Female to 2” Square Male $160.00
AH250H200 2-1/2” Hex Female to 2” Hex Male $295.00
AR200R250 (Specify Bolt Hole) 2” Round Female to 2-1/2” Round Male $160.00
AR200H200 2” Round Female to 2” Hex Male $160.00
AR256R200 2-9/16” Round Female to 2” Round Male $160.00
AR256H200 2-9/16” Round Female to 2” Hex Male $160.00
ASQ150R200 1 1/2” Square to 2” Round $137.50
Auger
Adapters
Prices Effective as of 2-14
![Rotary drilling tools - Liebherr Group · Rotary drilling tools 5 Rock augers AU-RSC single-start Technical data D NL GL Torque Weight [mm] [mm] [mm] [kNm] [kg] 520 1500 2300 220](https://img.pdfslide.us/doc/110x75/5ed7813b28a0984b5c033be1/rotary-drilling-tools-liebherr-group-rotary-drilling-tools-5-rock-augers-au-rsc.jpg)
![l>lf·· E ·B; -I,:,C-·-1·1V · cat. no.i bd lj.657 bd lj.6]5 bd 4630 bd 4·627 bd 4628 bd 4886 bd 4546 bd 4·545 bd 4544 bd 4542 bd lj,588 bd lj.593 bd 0102 bd 4636 bd 4632 bd](https://img.pdfslide.us/doc/110x75/5f7c69bb7d840d18665ab1e6/llf-e-b-ic-11v-cat-noi-bd-lj657-bd-lj65-bd-4630-bd-4627-bd-4628-bd.jpg)
![Rotary drilling tools...Rotary drilling tools 7 Rock augers AU-RSCi double-start, without pilot Technical data D NL GL Torque Weight [mm] [mm] [mm] [kNm] [kg] 520 1500 2330 220 730](https://img.pdfslide.us/doc/110x75/5fb970ad77a05161e855b79a/rotary-drilling-tools-rotary-drilling-tools-7-rock-augers-au-rsci-double-start.jpg)
