-
STAM
PATO
SU CA
RTA R
ICICL
ATA.
NESS
UN AL
BERO
E' ST
ATO
ABBA
TTUT
O PE
R PRO
DURR
E QUE
STO
MANU
ALE
Cod.
031
3.95
9 - E
d.02
11/
00
We congratulate for having bought this top-quality
espressomachine and thank you for choosing Saeco.Before operating
the machine, we recommend to read thefollowing instructions
thouroughly which explain how to use,clean and maintain the
machine.
User's and maintenance booklet
TYPE SUP 015
HOUSEHOLD USE ONLY
OY LD I G I T A L
-
3LU
X E
4
11 13
123 23
19
15
16
17
18
21
20
22
7
5
1410 12
24
Aufheizen...
9
6
8
-
4 5
Aufheizen...
-
+
32
34
26
27
30
6 5 4 3 7 2
28
33
25
31
29
42
37
12
34
56
7
12
34
56
7
41
12
34
56
7
42
40
38
12
34
56
7
45
12
34
56
7
39
12
34
56
7
44
43
35 36
-
How to use the instructionsThese instructions cannot anticipate
everypossible use of the machine.For further information or
questions concern-ing specific situations or problems,
pleasecontact the local dealer or manufacturerdirectly.
DESCRIPTION OF SYMBOLS TECHNICAL DATA
Voltage rating See rating plate on the back of the
machineNominal power See rating plate on the back of the
machineDimensions (length x width x height) approx. 385x330x395
mmMachine case plastic material ABS/metalWeight approx. 13 kgCable
length approx. 1.2 mSystem free flow thermal cut-out, alternating
piston pumpTemperature control electronicCoffee grinder adjustment
grinding adjustment deviceCoffee grounds ejection automaticGround
coffee dosage coffee releasing deviceCup programming 0-250 ml
approx.Water tank removable, transparent tankWater regulation
electronic, continuousCapacity - water tank approx. 2.4 litres
- bean coffee container 300 g bean coffeeSteam/hot water
dispensing tube adjustable, supplied with burn protectionSteam/hot
water dispensing adjustable, continuousHeating time approx. 2
min.Brewing time - espresso coffee approx. 20s/cup
- coffee approx. 30s/cup- hot water approx. 60s/cup- milk
approx. 60-90s cream/cup
Overheating protection incorporatedInsulation protection range
IApprovals See rating plate on the back of the machineIn compliance
with EN regulation EN 60335-2-15 (96) - EN 60335-2-14 (96) - EN
55014Warranty in compliance with the warranty
certificate enclosed herein
Accessoires (included in the machine price)Measuring
spoonCentral unit keyCleaning brushWater hardness detecting
strips
The manufacturer reserves the right to make improvements to the
appliance due to technological advancement.
Table of contents
Page
38 Programming the machine41 Recommendations42 Brewing43
Incorporated safety devices45 Cleaning/Maintenance49 Disposal50
Troubleshooting
Page
31 Technical data33 Safety indications35 Controls and machine
parts35 Control panel description36 Unpacking/Installation36 Power
supply connection36 Starting and use37 Drainage
31
The warning triangle shows all importantsafety indications to
ensure the users safety.The non-observance of said instructionsmay
cause serious injuries!
The first cover page of the manual showsfigures relevant to the
text. Thus, keep itopen while reading the instructions.
BReference to figures, parts of the machineand control elements
are given by numbersor letters, as figure B exemplifies.
Save these instructions carefullyand make sure to hand them
toother users.
30
SAVE THESE INSTRUCTIONS
The lightning flash with arrowhead symbol,within an equilateral
triangle, is intended to alertthe user to the presence of
unisulateddangerous voltage within the productsenclosure that may
be of sufficient magnitude toconstitute a risk of fire or electric
shock topersons.
The exclamation point within an equilateraltriangle is intended
to alert the user to thepresence of important operating
andmaintenance (servicing) instructions in theliterature
accompanying the appliance.
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:091
-
2928 SAFETY INDICATIONS
Electrical parts should never be incontact with water: danger of
short-circuit! Steam and hot water maycause burns. Never direct
steam orwater jets towards the body; specialattention must be paid
when touchingthe steam/hot water spout and theheating plate: danger
of burns!
PositioningPlace the machine on a plane surface, wherenobody can
turn it upside down or be hurt. Hotwater or overheated steam might
escape fromthe machine: danger of burns! Never use thecoffee
machine outdoors or inside rooms withlow temperature conditions. Do
not place themachine on hot surfaces or in the proximity ofopen
flames to avoid possible damages of thecase.
CDanger of burnsDo not direct the overheated steam or hot
waterjet towards you or other people. Do not touch hotsurfaces,
such as the steam/hot water spout.
DNecessary spaceFor a proper operation of the machine it
isadvisable to keep to the following indications:- choose a
levelled surface- choose a properly lit and hygienic roomprovided
with accessible sockets- leave a minimum distance of 100 mm
betweenthe machine and the wall
ECleaningBefore cleaning the machine, make sure toswitch off all
keys and unplug the machine. Waituntil the machine cools down.
Never plunge themachine into water! Do not tamper with the
innerparts of the machine and never open the ma-chine.
Repair/maintenanceIn case of defect or suspected damage
followinga fall, unplug the machine immediately. Neveruse a
defective appliance. Only skilled person-nel are authorised to
carry out repairs. Themanufacturer declines any liability
whatsoever,should repairs fail to be carried out by
authorisedpersonnel.
In case of fires, use carbon dioxide (CO2)extinguishers. Never
use water or powder extin-guishers.
This machine must be used exclu-sively for the purposes it has
beenmanufactured.Do not make technical changes for any
reasonwhatsoever; any improper use is forbidden, dueto the risks
which might occur!
WarningsThe machine shall only be used by adults andproperly
instructed persons.
VoltageNever touch parts under current! They mightcause electric
shocks, serious injuries and death.The machine must be connected to
a socket withsuitable voltage. Voltage must correspond to
thevoltage shown on the appliance rating plate.
APower cordNever use the machine with a defective powercord.
Replace defective power cords and plugs,contacting authorised
personnel . Do not extendthe power cord around corners, sharp edges
orover hot parts and protect it from oil. Do not shiftor move the
machine by pulling its power cord. Donot unplug the machine by
pulling the power cordand never touch it with wet hands. Make sure
thepower cord does not hang from tables or shelves.
BKeep children awayDo not allow children to play with the
machine.Children are not aware of the potential dangercaused by
electric appliances.
E
B C
A
D
10cm10cm
3332
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:092
-
Control panel description
Digital display
Standby switchStandby mode on/off
WARMING UP ......
Selection key for 1 or 2 cups of regular coffeeor key > in
the programming mode
Selection key for 1 or 2 cups of tall coffee or key> in the
programming mode
Selection key for 1 or 2 cups of espresso coffee or key in the
programmingmode
Pre-ground coffee selection button or key in the programming
mode
Steam selection button
3130 CONTROLS AND MACHINE PARTS
UNPACKING/INSTALLATIONUnpacking/Installation
Standard packing is strong enough to protectthe machine during
mail shipping. Keep thispackage to return the machine to the
manufac-turer should it be necessary.
Before installing the machine, keep to thefollowing safety
indications:
Position the machine in a safe place.
Do not allow children to play with the machine.
Make sure the machine is not placed nearby hotsurfaces or open
flames.
Always use the machine with the swivel (24).Thus, when
installing the machine, make sure torest it directly on this
support by inserting it intothe slot on the lower side of the
machine.
Now the machine is ready to be connected.
Power supply connection
Warning: electric current may cause death!
The coffee machine must be connected to anadequate socket.
Voltage must suit to the volt-age specified on the appliance rating
plate.
Never use defective power cords. Defective
power cords and plugs must be replaced byauthorised
personnel.
Should an extension cord be used, check itsperfect condition.
The extension cord must havea minimum section of 1,5 mm2 or 16 AWG
andmust be supplied with a three-pole plug/socket.
Starting and use
Danger!Electric voltage may cause death!Parts under current
shall never be incontact with water: danger of short-circuit!
Overheated steam and hotwater may cause burns. Do not directsteam
or water jet towards the body;furthermore, great attention must
begiven when touching either the dis-pensing tube or the heating
plate:danger of burns!For your own safety as well as forother
peoples safety, keep to thesafety precautions described (seepage
33).
Never use the machine without wateror coffeebeans.
Remove measuring spoon, brush and the cen-tral unit key from the
coffee grounds container(1) and keep them within reach.
Unwind the power cord (5) from the rear side ofthe machine.
1 Coffee grounds container2 Drip tray3 Cup holder surface4 Main
switch5 Power cord6 Coffee dispensing unit7 Steam/hot water
dispensing tube with heat
protector8 Control panel9 Steam/hot water selection knob10
Heating plate for cups11 Water tank12 Water tank cover
13 Water level14 Pre-ground coffee container with cover15 Coffee
bean container cover16 Coffee bean container17 Grind adjustment
lever18 Coffee dosage adjustment lever19 Service door20 Filling
funnel21 Handle for assembling and disassembling
of central unit22 Central unit23 Coffee rest drawer24 Swivel
3635IMPORTANT SAFEGUARDS
a) A short power-supply cord (or detachable power-supply cord)
is to be provided toreduce risks resulting from becoming entangled
in or tripping over a longer cord.b) Longer detachable power-supply
cords or extension cords are available and may beused if care is
exercised in their use.c) If a long detachable power-supply cord or
extension cords is used,
1) The marked electrical rating of the detachable power-supply
cord or extension cordshould be at least as great as the electrical
rating of the appliance,2) If the appliance is of the grounded
type, the extension cord should be a grounding-type 3-wire cord,
and3) The longer cord should be arranged so that it will not drape
over the counter top ortable top where it can be pulled on by
children or tripped over.
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:093
-
333225The bean coffee container (16) is attached withtwo screws.
Remove the cover (15) and fill itwith coffee beans (approx. 300 g),
then re-place the cover.Adjust grinding by means of the grind
adjust-ment lever (17), positioning it on point 5 of thescale.
Never fill the coffee bean container with otherproducts. They
might damage the machine!
Before filling the container with coffee beans,make sure the
pre-ground coffee container isclosed to prevent coffee beans from
falling intoit. They might damage the machine!.
26Remove the water tank (11) from the machine,remove its cover
(12) and fill it with cold water(approx. 2.4 l). A valve on the
tank bottomprevents water from escaping.
Before installing the water tank in themachine, make sure the
coffee beancontainer cover is properly fitted.
Install the water tank, slightly pressing over it tofit the
valve which will open automatically.Replace the cover on the
tank.
Do not fill the tank with an excessive quantity ofwater.
Always fill the tank with fresh water: hot wateras well as other
fluids might damage the tank.
DRAINAGE PROGRAMMING THE COFFEE MACHINE3837
Do not switch on the machine if the water tankis empty. Before
using the machine make surethere is enough water in the tank.
Connect the plug to the socket and press themain switch.The
display shows
"WARMING UP...... "
Should "ENERGY ""SAVING "
be displayed, press the Energy saving switch todisactivate the
energy saving mode.
Drainage
Direct the steam/hot water dispensing tube (7)over the drip tray
(2). Place a cup or anothersuitable container under the dispensing
tube,then turn the steam/hot water knob (9)counterclockwise. The
pump starts automati-cally. Wait until a regular water jet is
obtained,then close the knob. The machine is nowdrained and ready
to work.The display shows
"SELECT PRODUCT ""READY FOR USE "
Important: It is advisable to drain the machinebefore the first
start, after a prolonged periodthe machine has not been used or
whenever thewater tank has been completely emptied. Fur-thermore,
should the pump be defective, thedisplay shows
"VENTILATE "
Programmingthe coffee machine
27To enter the programming mode, press the keyENT (pre-ground
coffee) when the machine ison and keep it pressed until the first
two lines ofthe programming mode are displayed:
"LANGUAGE ""RINSING "
At the end of the line appears a blinkingasterisk, which can be
moved up and downwith the keys (tall and regular coffee).
The display shows the following items in thissequence:
LANGUAGE PREGRINDINGRINSING TOTAL COFFEESWATER HARDN.
DESCALINGCUP HEATER SIGNAL. DESCAL.TEMPERATURE TIMERPREBREWING
RINSING CYCLE
Then, press ESC. The machine is now in thenormal mode again.
Selecting menu items
Select the different menu items by means of thekeys . The key
ENT allows you toactivate the selected item. It is possible
tomodify the selected figures in a menu item usingthe keys . The
key ENT memorizes theselected options, for instance ON for the
itemcup heater.Should you accidentally change some data,press ESC
to leave the menu item without savingthe new options which were
selected acciden-tally.
Selecting the language
Move the asterisk at the end of the line to themenu item
LANGUAGE using the keys .Press ENT to activate this item.The
display shows:
"LANGUAGE ""ENGLISH "
The keys allow you to change the setoptions: italiano, franais,
Deutsch, english,espaol, portugus.
Rinsing cycle function
If the rinsing cycle function is activated, themachine that is
started after a period of inactiv-ity starts a water rinsing cycle
to the coffeedispensing units automarically.
Move the asterisk to the menu item RINSING CYCLEusing the keys
und press ENT to active it.The display shows:
"RINSING ""ON "
You can modify the chosen item with thekey : on; off.
Water hardness adjustment
In order to adjust the water hardness, it isnecessary to test
the water using the stripsupplied with the machine. Dip the strip
into thewater for a second, shake off excess watergently, wait
approx. 1 minute and read theresults.
Move the asterisk at the end of the line to themenu item WATER
HARDN. using the keys
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:094
-
3534. Press ENT to activate this item.
The display shows:
"WATER HARDN ""HARDNESS 2 "
Activating the cup heater
Move the asterisk at the end of the line to themenu item CUP
HEATER. Press ENT to activatethis function.The display shows:
"CUP EATER ""ON "
The keys allow you to change the setoptions: on, off.
Selecting temperature
Move the asterisk at the end of the line to themenu item
TEMPERATURE using the keys .Press ENT to activate this item.The
display shows:
"TEMPERATURE ""MEDIUM "
The keys allow you to change the setoptions: minimum, low,
medium, high, maxi-mum.
Selecting the prebrewingfunction
As soon as the coffee has been moistened, thepump stops for a
while. Then, the brewing cyclecontinues.Move the asterisk at the
end of the line to themenu item PREBREWING using the keys .Press
ENT to activate this function.The display shows:
"PREBREWING ""ON "
The keys allow you to change the setoptions: on, off, long (in
this case the pumpstops for a longer period).
Selecting the pregrindingfunction
By selecting the pregrinding function, the ma-chine grinds
coffee every time the doser isempty. So, a ground coffee portion is
alwaysready in the doser. This allows time saving in
thesemi-professional domain.
Move the asterisk at the end of the line to themenu item
PREGRINDING using the keys
. Press ENT to activate this function.The display shows:
"PREGRINDING ""OFF "
The keys allow you to change the setoptions: on, off.
Total coffee
Move the asterisk at the end of the line to themenu item TOTAL
COFFEES using the keys
PROGRAMMING THE COFFEE MACHINE PROGRAMMING THE COFFEE
MACHINE
. Press ENT to activate the option.The display shows:
" TOTAL COFFEE"" 1234"
and the total number of coffees dispensed bythe machine.This
figure cannot be changed.To leave this menu, press ENT or ESC.
Descaling
Move the asterisk at the end of the line to themenu item
DESCALING using the keys .Press ENT to activate the item.The
display shows:
"DESCALING "
On descaling see page 47.
In programming function, by pressing keys,move the asterisk till
the end of the line on themenu Sign. Descal. and confirm the
selectionwith ENT button.The following message will be
displayed:
"RESET DESCALING ""NO "
By means of the same keys, it is possible tomodify the value;
Yes, or no.
If the function "SIGN. DESCAL. "is selected without the display
message Descale,the following message will be displayed:
"QUANTITY WATER ""NOT REACHED "
To enter the programming mode, press the KeyENT.
Timer
The timer enables the automatic switching off ofthe machine
after a preset period, which can beset from 15 minutes to 12 hours
after lastdispensing.If after a few seconds coffee is brewed
again,the timer is reset. If the value set is 0:00, thetimer
function is not activated and the machinedoes not switch off.
Move the asterisk at the end of the line to themenu item TIMER
by means of the keys .Press ENT to activate this item.The display
shows:
"STANDBY ""AFTER 0:00"
The keys allow you to set the time peri-ods. Save by means of
the ENT key.
If the set time has already passed, the displayshows:
"ENERGY ""SAVING "
and the machine switches off. If necessary, youcan switch on the
machine again by means ofthe energy saving switch.
Rinsing cycle
This appliance is equipped with a rinsingcycle program for the
usual, daily andweekly rinsing. If regularly used, this pro-gram
effectively eliminates the greasiness ofcoffee in inaccessible
parts and avoidsalterations in the taste of coffee.Depending on the
way the appliance isused, it is advisable to rinse it every monthor
after max. 250 cups of coffee. Therinsing cycle lasts about 5
minutes, and it isdivided into 4 cycles, including the rinsing
4039
Hardness 4
Hardness 3
Hardness 2
Hardness 1
The keys allowyou to change the setoptions:hardness 1
(verysoft), hardness 2 (soft),hardness 3 (medium),hardness 4
(hard).
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:095
-
3736This message appears on the display as soonas there are 30
coffee grounds in the container.The machine though does not stop.
Remove thegrounds container and empty it.
Grind
If the coffee flows too quickly (coarse grind) ortoo slowly
(fine grind) into the cup, adjust thecoffee grinder:
Recommended grind level: position 5Grind too coarse = adjust to
a lower value (forinstance from 5 to 3)Grind too fine = adjust to a
higher value (forinstance from 5 to 7).
Adjust the grind level only when the coffeegrinder is
running.Avoid extreme adjustment (for instance, onposition 1)
whenever possible. It is preferable totry another coffee blend,
because not all coffeeblends are suitable.
Coffee
Make sure coffee is fresh. An espresso roast ispreferable.In
order to obtain a strong and aromatic espressocoffee, use special
blends suitable for espressocoffee machines and special cups with
thick sides.Keep coffee in a cool place, in an hermeticallysealed
container.
Dosage of ground coffee
28The coffe dosage adjustment lever (18) allowsthe selection of
the coffee quantity, from 6 to 9grams.
RECOMMENDATIONS BREWING4241with cold water. Each cycle is
followed bya short pause of about 40 seconds.
Never stop the rinsing cycle.
Important: before starting the rinsingcycle, always fill
completely the water tankand put a capacious container (min. 1
litre)under the coffee dispensing unit, which isheight-adjustable
and can be removed forcleaning.The rinsing cycle needs about 1
litre ofwater (including final rinsing). From time totime, empty
the water tank.
By using the keys move the asterisk tothe menu item RINSING
CYCLE. To enablethis menu item use the ENT key.The following
message appears on thedisplay:
"RINSING CYCLE "
This function starts the rinsing cycle withwater of those parts
concerned with thecoffee dispensing. When the rinsing cycleends,
the following message appears onthe display:
"SELECT PRODUCT ""READY FOR USE "
Recommendations
Test
If the machine has not been used for a pro-longed period, it is
advisable for hygienicreasons to run a rinse cycle through the
ma-chine.
Place a cup under the dispensing tube (7) andoperate the
steam/hot water (9) knob. Fill a cupwith water.
Preheating cups
Cups may be preheated by placing them on theheating plate.
Temperature led
When connecting the machine, the displayshows
"WARNING UP...... "
As soon as the operating temperature has beenreached, the
display shows
"SELECT PRODUCT ""READY FOR USE "
Empty coffee bean containerwarning light
"COF. BEANS EMPTY ""READY FOR USE "
When this led is on, the coffee grinder stops. Fillthe container
with coffee beans and restart thecycle.
Empty water tank warning light
"FILL WATERTANK "
An empty water tank causes the cycle to stopautomatically. Fill
the tank with water and restartthe cycle.
Grounds container warning light
"DREGDRAWER FULL ""READY FOR USE "
Place the adjustment lever (18) on the requiredposition.
Water quality
In addition to blend, grind and water tempera-ture, the water
quality is of the utmost impor-tance for the brewing of a good
coffee. Thus,the use of a decalcifier to remove limescale
andeliminate any unpleasant taste and organicimpurities from water,
is strongly recommended.Furthermore a water decalcifier partially
elimi-nates limescale from water, thus protecting themachine
heating system from chemical buildupand prolonging its working
life.The water tank must be emptied daily and filledwith fresh
water.
Operation time
The machine may be kept on all day long.However, it is advisable
to activate the energysaving mode after the last use. Press the
Energysaving switch. If the timer has been programmed,the machine
switches on automatically. Seepage 40.Should the machine not be
used for a pro-longed period (e.g. during the night) it isadvisable
to switch the main switch (4) off.
Switching off the machine
Switch the machine off only after the coffeecycle has been
concluded.
Brewing
Cup level filling
This machine allows the precise dosage of the
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:096
-
of coffee.
The coffee flow may be stopped at any momentby pressing any
selection button (except thestandby switch), for instance when an
excessivequantity of water has been selected.
Hot water
The hot water dispensing is separate from thecoffee circuit, in
order to supply tasteless hotwater for tea, soup etc.
31Place a glass or cup under the steam/hot waterdispensing tube
(7), then slowly open knob (9),turning it counterclockwise. Hot
water will beautomatically dispensed. As soon as dispens-ing is
over, close knob again.
Steam
To heat milk or other drinks.
Clean the spout with a damp cloth soon afteruse; otherwise, it
might be difficult to removemilk residues.
After a steam outflow, always drain the ma-chine. If the machine
is not drained or drainedpartially, the coffee brewing program
automati-cally stops, due to excessive temperature.
If the machine is on the steam mode , theautomatic coffee
brewing is prevented.
3938"STEAM ""WARMING UP...... "
Press the steam selection button and waituntil the machine
reaches the operating tem-perature.
"STEAM ""READY FOR USE "
Operating temperature has been reached.
Direct the steam/hot water dispensing tube (7)over the cup
holder grill (3) and slightly openknob (9), turning it
counterclockwise.Wait until the remaining water has flown out ofthe
spout. Then move the spout outwards andimmerse it into the fluid to
heat.
32Slowly open the steam/hot water knob andheat the fluid using a
circular movement from thebottom to the top.
When the fluid has reached the desired tem-perature, close the
knob and immediately cleanthe spout with a damp cloth.Warning: the
spout is hot, it may cause burns!
If you are not going to use the steam/hot waterdispensing tube
any longer, position it over thecup holder grill and disactivate
the steam func-tion by pressing the key .
"OVERTEMPERATURE "
The machine stops working and does not brewcoffee. Let it cool
down or open the steam/hotwater knob again.
"HOT WATER ""OVERTEMPERATURE "
Drain the machine (the pump starts automati-
BREWING BREWING
coffee quantity according to the cup dimension.
By means of the 3 selection keys thedesired coffee quantity can
be chosen. Thedisplay shows the selected quantity.
Cup level adjustment
To set the quantity of coffee to be dispensed,press the
selection key corresponding to theright quantity and keep it
pressed while thecoffee is dispensed into the cup. Release the
keyonly when the right level has been reached(max. 250 ml approx.).
As soon as the dosageprogramming mode gets activated, the
displayshows:
"1 SMALL COFFEE ""PROGR. QUANTITY "
Warning! If activated, the pre-brewing functionwill be
performed.
Double quantity of coffeei.e. 2 cups of coffeeIf one of the
three selection keys (no matterwhich one) is pressed twice before
coffeebrewing, the machine will brew a doublequantity of
coffee.
Coffee beans
29This machine grinds a portion of fresh coffee foreach cup; for
two cups, it grinds two portions ofcoffee, one after the other thus
ensuring opti-mum coffee quality.
Before any use, make sure the steam/hot waterknob is closed.
Adjust the desired grinding degree: the recom-mended average
value is 5.
The grinding degree must be adjusted onlywhen the coffee grinder
is operating, otherwiseit may be damaged.
Place one or two preheated cups on the grill (3)under the
dispenser (6). Press the relevantselection key. The machine will
automaticallydispense the selected coffee.The coffee flow may be
stopped at any momentby pressing any selection button (except
thestandby switch), for instance when an excessivequantity of water
has been selected. Should youinterrupt the coffee flow after the
first of two coffeeshas been brewed, the second is not
dispensed.
Pre-ground coffee
Make sure to use pre-ground coffee only (me-dium ground). Never
use whole beans orsoluble coffee!
Right before making coffee, fill the containerwith freshly
ground coffee. Remember thatground coffee ages soon, thus losing
its quality.
30Use the measuring spoon supplied to fill thecontainer (14)
with ground coffee. Use a fullmeasure only.
Then, press the pre-ground coffee selectionbutton and the
desired selection key (regu-lar, espresso or tall coffee) to obtain
a cup ofcoffee. It is not possible to obtain a second cup
4443
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:097
-
4140 CLEANING/MAINTENANCEINCORPORATED SAFETY DEVICES /
CLEANING/MAINTENANCE 4645Automatic temperatureadjustment
This adjustment controls the correct temperaturefor coffee,
water, and steam. Coffee brewing isautomatically interrupted should
the water tem-perature be too high (safety thermostat
andoverheating safety device activated).
Antigravel device
Even selected coffees may contain some impu-rities. The coffee
grinder is fitted with an antigraveldevice to avoid any damage.
Should gravelend up into the coffee grinder, you will hear astrong
and characteristic noise. Stop the ma-chine immediately otherwise
the protection sys-tem will stop the coffee grinder after approx.
20seconds.
Cleaning/Maintenance
Cleaning
To ensure high coffee quality and a longerworking life of the
machine, always keep themachine clean.
Before cleaning the machine, turn off the mainswitch and unplug
the machine.
Before cleaning the machine, wait until it coolsdown.
Do not immerse the machine into water orother fluids. (It may be
damaged!)
Do not wash parts of the machine in thedishwasher!.
Always handdry all parts of the machine; do notdry them in the
oven or microwave oven!
Water tank / Drip tray / Coffeegrounds container / Coffee
dispens-ing unit / coffee machine
33In order to keep the service area and the centralunit (22)
clean, it is recommended to empty thecoffee grounds container (1)
every day.The water tank (11), drip tray (2), cup holdergrill (3),
and coffee grounds container shouldbe washed periodically, using a
non-abrasivesolvent and drying them carefully.
34The coffee dispenser (6) may be removed forcleaning
operations. Unloose the screws andrinse the dispensing tubes
thoroughly with hotwater.
From time to time, clean the machine casingwith a damp cloth and
dry it.
Clean the pre-ground coffee container (14) withthe aid of the
brush supplied whenever necessary.
Central unit
Clean the central unit (22) whenever the coffeebean container
has been re-filled, or at leastonce or twice a week.
Switch off the machine by pressing the main
switch (4) and open the service door (19).Remove the coffee
grounds container (1).
35Remove the central unit (22) by holding thehandle and pressing
the PRESS key.
Wash the central unit with warm water withoutany solvent. Make
sure there are no coffeeresidues on the two steel filters.
36Remove the superior filter by means of thesupplied screw and
clean it. Unscrew thescrew, turning it counterclockwise. Then, dry
allthe parts of the central unit and tighten the filterwith the
screw.
37Remove the coffee rest drawer (23) and cleanit, using a
non-abrasive solvent.Clean the service space thoroughly and fit
thecoffee rest drawer again.
38By holding the central unit by its handle, slide itback into
its original position, making sure it iscorrectly engaged. Then
close the service door.Insert the coffee grounds container
again.
When fitting the central unit, do notpress PRESS (this may cause
dam-age to the machine)!
Warning: if the central unit is not correctlyfitted, the display
shows
"BREW UNIT MISS "
It is not possible to brew coffee. The machinedoes not work.
USER MAINTENANCEINSTRUCTIONS
cally) until water flows regularly out of the spout(see section
on Drainage, page. 37) and thedisplay shows
"HOT WATER "
Close the steam/hot water knob. The machineis ready to brew
coffee again.
Cappuccino froth
Fill a cup 1/3 with cold fresh milk, then immersethe steam/hot
water dispensing tube (7) justbelow the milk surface. Move the cup
with acircular movement to form a thick froth. Thenimmerse the
dispensing tube deep into the milkto heat it.
Incorporated safety devices
Automatic off
Should the service door be open, the machineautomatically
switches off and its operation isthus prevented. If the central
unit is not mounted,it is possible to dispense water but not
steamand coffee.
Electronic grinding time control
As soon as the coffee bean container is empty, themachine
automatically stops after approx. 20seconds. Fill the container
with coffee beans. Thecoffee brewing cycle can be restarted.
Electronic pump delivery control
The machine switches off automatically as soonas the water tank
is empty.
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:098
-
Pour a descaling solution into the water tank(according to the
instructions on the package).Place a large container under the
steam/hotwater dispensing tube and open the steam/hotwater knob
slowly. The automatic descalingstarts. Small quantities of
descaling solution arepumped into the circuit. Then the pump stops
tolet the solution take effect.The display shows:
"MACHINE IS ""DESCALING "
This operation takes about 45 minutes. As soonas descaling is
completed, the display shows:
" DESCALING "" FINISHED "
and the pump stops.
Close the hot water knob and press ENT. Adisplay message reminds
you to rinse awayresidue from the machine
"RINSE MACHINE "
Remove the water tank, rinse it and fill it withwater. Clean the
machine using the hot waterknob and let the whole tank content flow
out.The display shows:
"RINSING FINISHED "
Close the hot water knob again and press ENT.The machine is in
the main menu of the program-ming mode. Press ENT. The machine is
now inthe normal mode. After heating, the machine isready to
work.
NoteDescaling can be interrupted any time bypressing ESC. Before
doing this, close the hotwater knob.
4847 CLEANING/MAINTENANCECLEANING/MAINTENANCECoffee grinder
Never fill the coffee grinder with water: it maydamage the
machine!
Descaling
Warning: The descaling operations musbe carried out when the
machinecomponents are cold.
Descaling is necessary to remove limescalefrom all surfaces and
holes, thus ensuring aperfect operation of valves, heating
controlsand other important parts.
Note: due to the complexity of the coffeemachine hydraulic
circuit, the followingdescaling cycles (automatic and standard)do
not allow the descaling of all tubes.In fact, easily accessible
componentssuch as the central unit (22) and itsplastic connection
are excluded.
The machine must be descaled every 3-4 months,according to the
water hardness degree. Amore frequent descaling is recommended
wher-ever the water hardness degree is very high.This machine is
supplied with a particularwarning light
"DESCALING ""READY FOR USE "
Descaling must be carried out at the latest whenthis message is
displayed. In spite of the mes-sage, the machine does not stop
working. Toswitch off the display, press the steam key forapprox. 5
seconds until the message disap-pears.Furthermore, said display
warning may be
adjusted according to the water hardness de-gree. The machine
has been adjusted at thefactory to 25 _H value, which causes
thedisplay to switch on showing the messageDESCALING after approx
150 l.The water hardness value may be changed, ifnecessary,
following the instructions shown onpage 38.
The following adjustments are possible:Hardness 4: high water
hardness, over 29H (14 dH), approx. 80 l water passage.Hardness 3:
medium water hardness, approx.20-29 H (7-14 dH), approx. 150 l
waterpassageHardness 2: soft water, approx. 12-20 H(4-7 dH),
approx. 300 l water passageHardness 1: less than 10 H (3 dH),
approx.500 l water passage
In case of hard water, a filter should be usedboth to improve
the coffee quality and to protectthe machine, thus reducing the
descaling fre-quency.
Note: for this purpose, use a descaling prod-uct suitable for
coffee machines. Never usevinegar to clean the machine; it
mightdamage it.
There are two ways to carry out the descalingof the machine:
Automatic descaling
Switch the machine onto the programmingmode (see page 38).Move
the asterisk at the end of the line to themenu item DESCALING. To
activate this menuitem press ENT.The display shows:
"DESCALING "
Standard descaling
Switch off the machine. Pour a descaling prod-uct into the water
tank (according to the instruc-tions on the package). Place a large
containerunder the steam/hot water dispensing tube (7)and open the
steam/hot water knob (9) slowly,turning it counterclockwise. Turn
on the machineby pressing the main switch and let the
descalingproduct flow out of the dispensing tube forapprox. 1
min.Turn off the machine with the main switch andlet the solution
take effect for approx. 5 minutes.Repeat this procedure two or
three times, toallow all the descaling product in the water tankto
flow out of the dispensing tube.As soon as decalcification has been
carriedout, rinse the water tank (11) thoroughly and fillit with
water.Switch on the machine again and let water(approx. 2 l) flow
out of the steam/hot waterdispensing tube in order to rinse away
residue.The coffee machine is now ready for operation.
ImportantA periodic descaling avoids expensive repairs.The
machine warranty does not cover damagesoccurring as a result of the
non-observance ofdescaling procedures, improper use and anyother
instructions contained herein. Maintainthe manufacturers adjustment
if the water hard-ness degree is not known.
Storage of the machine
Switch off and unplug the machine if it will notbe used for long
periods of time.
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:099
-
Keep the machine in a dry place, far from thereach of
children.Should the machine not be used for a longperiod, keep it
from dust and dirty.
Maintenance
Periodically check the machine and clean it inaccordance to the
instructions.
Disposal
Machines which are no longer operationalshould immediately be
made non serviceable,by cutting the power cord. Machines should
bedelivered to a public disposal centre.
Troubleshooting
In case of failure, fault or suspected damagefollowing a fall,
unplug the machine immedi-ately.
To fix problems, follow the instruc-tions in the table below.
Otherwisecontact authorised personnel.
5049Possible cause/causesThe machine is not getting power
The service door is open
The steam key is being pressed
The pre-ground coffee selection keyhas been pressed while there
is nocoffee in the containerThe steam/hot water spout hole
iscloggedGrinding too coarse
Grinding too fine
The central unit filter is jammedThe cup has not been
preheatedThe coffee blend is not suitable,coffee has not been
recentlyground, the pre-ground coffee hasbeen ground too thin or
too coarseLimescale in the machine
The central unit is out of position
TroubleNo message on thedisplay
The automatic coffeebrewing does not start
Water is dispensedinstead of coffee
Steam and/or hot waterare not dispensedCoffee flows too
quickly
Coffee is flows too slowly
Coffee is not hot enoughCoffee is not creamy
The coffee brewing is re-duced, the machine takeslonger to heat
and the watercapacity is not correctThe central unit cannot
beremoved
Only skilled personnel are authorised to service and repair the
machine. The user might incur serious injuries should repairsnot be
properly carried out. The manufacturer declines any liability
whatsoever, should repairs fail to be carried outaccording to the
instructions contained in this manual. Furthermore, in these cases
warranty rights cannot be honored.
BREW UNIT BLOCK.
BREW UNIT MISS
WATERTANK EMPTYCOF.BEANS EMPTYREADY FOR USE
OVERTEMPERATURE
DREGDRAW. MISS.
GRINDER BLOCKED
ResolutionTurn the main switch on, check plugand fuseClose the
service doorInsert and lock the central unit
Clean the central unit (see page 46)
Disactivate the steam function anddrain the machine (see page
44)Fill with water or coffee beans andrestart the cycleDrain
thoroughly the machine again
Fit the coffee grounds containerproperlyClean the grinder
Fill with pre-ground coffee
Clear it with the aid of a thin needle
Adjust the grinder to a finer grinding,ex. from 6 to 3Adjust the
grinder to a coarser grind-ing. ex. from 6 to 7Clean the
filterPlace the cup on the heating plateTry another coffee
blend
Carry out the machine descaling, asdescribed at page 47.
Switch on the machine. Close theservice door and fit the coffee
groundscontainer. The machine returns auto-matically in its
starting position.
TROUBLESHOOTINGDISPOSAL
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:0910
-
IMPORTANT SAFEGUARDSWhen using your coffee maker, basicsafety
precautions should always befollowed, including the followed to
reducethe risk of fire, electric shock, and/orinjury to persons
including the following:1 Read all instructions.2 Do not touch hot
surfaces. Usehandles or knobs.3 To protect against electric
shock,do not place cord, plug or appliance inwater or other
liquid.4 Close supervision is necessarywhen any appliance is used
by or nearchildren.5 Unplug from the outlet when not inuse and
before cleaning. Allow to coolbefore putting on or taking off
parts, andbefore cleaning the appliance.6 Do not operate any
appliance witha damaged cord or plug or after theappliance
malfunctions, or has been
damaged in any manner. Returnappliance to an authorised service
facilityfor examination, repair or adjustment.7 The use of an
accessory notevaulated for use with this appliance maycause
injuries.8 Do not use outdoors.9 Do not let cord hang over edge
ortable or counter, or touch hot surfaces.10 Do not place on or
near a hot gasor electric burner, or in a heated oven.11 Always
attach plug to appliancefirst, then plug cord into the wall outlet.
Todisconnect, turn any control to the offposition, then remove plug
from walloutlet.12 Use this appliance only for itsintended use as
described in this manual.13 Keep the cord away from
heatedsurfaces.
SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTORIZED SERVICE PERSONNEL ONLY
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFEGUARDS 5134
Man. Titan 0313.959 ING (UL) 12-12-2000, 16:0911
