Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
“Man is free at the moment he wishes to be” (Voltaire)
Digital Televison, mobile internet threat, white spaces devices
are not a future scenario but your present playground,
BE READY with the new WISYCOM MRK9XX serie:
Extreme Agility, with a working bandwidth of 370 MHz
Highest immunity with movable filters and high power amplifiers
Exclusive solutions like the programmable matrix/combiner
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MRK 950 Modular Wireless-Microphone Receiver System
19” 1U module, stackable, with dual true diversity receivers
MMaaiinn FFeeaattuurreess Extreme RF (radiofrequency) performances and reliability.
Tuning windows up to 370 MHz with tunable filters (2 ch’s independent):
- MRK 950-M 470 MHz to 678 MHz (TV ch 21/46) (option M)
- MRK 950-H 630 MHz to 870 MHz (TV ch 41/70)
- MRK 950-X 470 MHz to 800 MHz (TV ch 21/62) with internal active splitter
- MRK 950-W 470 MHz to 840 MHz (TV ch 21/67) with internal active splitter
Wisycom digital expansion bus (DEXB) for future upgrade/enhancement thru
simple slot-in card (pc-like). DEXB can host DSP (40bit dsp processing) upgrade
cards providing:
o digital output (i.e. AES3, Ethersound)
o multi-companding compatibility
o future digital functionality enhancements.
Balanced electronic AF output (low impedance transformer-coupled optional)
2 USB’s connectors for configuration/monitor and cascade rack connections
Automatic scan for best channels, squelch and other automatic setup
Infrared interface (i.e. for system setup, microphone programming)
Automatic transmitter re-programming (thru infrared)
Software to monitor/setup units and with spectrum field analysis
Optional (upgradable):
Ethernet 10/100 base Tx network interface for configuration/monitor
Digital audio interfaces:
- Ethersound interface
- AES/EBU digital interface (with word-clock in/out)
PTT (Push to Talk) function with audio exit and GPI signals (patented)
Low impedance transformers outputs
GGeenneerraall DDeessccrriippttiioonn The system presents exceptional selectivity and inter-modulation immunity for best operating performance of the wireless-microphone system even in the presence of DVTB-T transmitter’s signals. MRK 950 is designed to be:
“easy & quick to use” thanks to automatic setup functions (i.e. frequencies, squelch), remote configuration utilities (USB/Ethernet), display with intuitive context menu navigation.
“extremely flexible”, in fact each of the two receivers can work in a 240 MHz bandwidth, more than one rack can be connected together thru a simple USB cable to act a multi-channel receiver. Moreover, the DSP interface allows the units to work with several digital audio output (i.e. AES/EBU, Ethersound, …), multi-companding compatibilities and other digital features.
“best in class performances”, thanks to the latest Wisycom technology the unit has extreme RF sensitivity and immunity and superb audio quality.
“a durable & upgradable investment” , thanks to the very robust design (aluminum housing) and the possibility of upgrade/enhance unit’s performances with simple slot in card (pc-like thru the DEXB expansion bus).
Moreover, MRK 950 system is already set up for the exclusive PTT function, recently developed by Wisycom and now appreciated in the broadcast world. It’s able to work directly with the new wireless microphones provided with built-in telemetry (either body-pack or hand-held transmitters) and Push-To-Talk button: simply pushing this button, the presenter causes the remote switching of the receiver’s
output-line, from the “main line” to the additional “intercom line”, in order to be able to talk “off-air” directly with the technical team (optionally a stuttering tone is back generated to signal the presenter of the push to talk status).
NEW
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MRK 950 Modular Wireless-Microphone Receiver System 19” 1U module, stackable, with dual true diversity receivers
TTEECCHHNNIICCAALL SSPPEECCIIFFIICCAATTIIOONNSS
• Frequency ranges : up to 370 MHz switching bandwidth in 470/870 MHz • Switchable channels : up 1024 (for each channel) • Frequencies : microprocessor controlled PLL frequency synthesizer circuit, with 25 KHz minimum step. • Frequency error : < ± 2.5 ppm, within the rated temperature range. • Temperature range : -10 ÷ + 55 °C.
• Modulation : FM (50µs de-emphasis), other de-emphasis can be pre-set on request and can be recalled from the menu.
• Nominal deviation : ±40 KHz @ 1 KHz, ±65 KHz peak (Max acceptable deviation = ±80 KHz). • “A” / “B” antenna inputs : with BNC type female connectors. • RF input impedance : 50 ohm (SWR < 1:2). • Sensitivity [1] : (-Ex) < 0.9 µV (-1 dBµV), for SND/N = 52 dBA[2], in the whole switching-range;
(-Ex) < 10 µV (+20 dBµV), for SND/N = 115 dBA[2], in the whole switching-range. • Amplitude response : < 0.2 dB (for RF input signal: +4 dBµV ÷ +120 dBµV).
• Co-channel rejection : > -3.5 dB @ 2 µV RF; > -1.5 dB @ 100 µV RF. • Adjacent chan. selectivity : > 90 dB @ ± 300 KHz. • Spurious rec. rejection : > 90 dB. • IF image rejection : > 110 dB. • IIP3 : +25 dBm (Input Intercept Point 3rd order) (-Ex). • Spurious emissions : < 1pW (typical. = 0.1 pW). • Squelch : - signal strength squelch: with menu adjustable threshold and “adaptive type” working: the
receiver adapts itself automatically to different conditions of both medium strength and speed variation of the received signal;
- tone-squelch: it works by decoding the special key, sub-carrier (digitally modulated)
present on the carrier of the actual Wisycom transmitters. The tone squelch function can be inhibited for compatibility with other types of transmitters.
• Noise Reduction system : compander circuit, can be pre-set (or switched off) to the following modes: - ENR (Wisycom Extended-NR) as default;
- CUSTOM (to be compatible with other brands transmitters). • AF line output level : +12 dBu (3.1 Vrms) @ nominal deviation. • AF line output peak level : +20 dBu (7.75 Vrms). • AF bandwidth : 40 Hz ÷ 20 KHz. • Frequency response : < ±0.5 dB (±0.2 dB typ.) in the 50 Hz ÷ 19 KHz range. • Distortion : < 0.3 % (0.10 % typ.) @ peak deviation.
• SND/N ratio [1] > 115 dBA (118 dBA typ.) [2]. • Monitor output : 1/4” (6.3 mm) stereo jack connector. • Monitor output level : max 6 Vrms / 150 ohm. • Monitor out impedance : 50 ohm. • Diversity technique : true-diversity (Twin receiver circuits). • Bar-graph meters : - RF field strengths (both “A” and “B” inputs) - AF deviation (5% ÷ 150%), with
peak-hold mode.
• Displays (2): 64 x 160 LCD dot Matrix (blue backlighted) • Calibrating AF tone : 1 KHz, +12 dBu (other on request). • Powering : 99 ÷ 138 Vac and 187 ÷ 264 Vac, with automatic switching / 100 VA max. • Dimensions : 19”/1U. Note [1]: ENR-system included. Note [2]: RMS value, A-weighted, 22 Hz / 22 KHz, and referred to the peak deviation. The MRK 950 Receiver System complies with ETSI 300 422.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
DIGITAL OPTIONS
DDIIGGCCOOMM Mrk950 system can host a digital
companding module (DIGCOM) connected
on its internal expansion bus (DEXB).
This DSP board is designed to assure the
highest SNR and a very low latency time
(0,6 milliseconds). Thanks to the powerful
DSP any specific compander can be
software loaded (and so also all other parameters as battery status and additional checks):
- this assures compatibility with present and future transmitters, and a great quality and
consistency in performances!
AAEESS995500 This upgrade option allow AES3 digital
exit on a XLR connector. World clock
input allows audio synchronization.
Working directly on the compressed
signal coming from FM modulation this
board assure a very high SNR and a
very low time delay (0,6 msec).
EETTSS995500 This option upgrades the receiver with add 2 digital
audio ETHERSOUND outputs.
Thanks to this additional board MRK950 can
interoperate in a ETHERSOUND audio distribution
network delivering crystal clear audio and low time
latency (0,6 msec) through a legacy 10/100 Base Tx
network.
The same network can be used to monitor and
control all system parameters!
ACCESSORIES FFLLTT995500 Kit to mount a removable air-filter on
Mrk 950. This is installed on the left
side and can be easily removed for
cleaning.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
REMOTE MANAGEMENT NNeettwwoorrkk ccoonnnneeccttiioonnss && aauuddiioo iinntteerrffaacceess
MRK950’s can be easily connected in cascade using the 2 usb ports (current SW version
support 4 racks cascade max for each daisy chain).
On the below example the unit on the top behave as a single 8 receiver rack (concentrating
remoting data from the below receivers); this way all the units can be easily
monitored/configured thru a single USB interface or Ethernet connection (a single IP).
Mrk950 is an upgradable platform with several audio distribution options both analogue (also
available a command line usable to double the audio output) and digital (AES3, Ethersound)
MMRRKK995500//992200 MMAANNAAGGEERR
This is a windows application, that will allow an easy management of one or many receivers,
connected either with USB connection or Ethernet network.
The user can easily monitor all the receivers at a glance, changing basic and advanced
parameters. Frequency and overall setup copied, saved and mirrored among receivers.
The software allows also more advanced functionalities, for instance spectrum monitor (in the
full 240 MHz Mrk950 bandwidth), control of receiver infrared interface for transmitter
reprogramming, inter-modulation check and more!
Ethernet 10/100 Base Tx
USB
AF cables A
N
A
L
O
G
U
E
D
I
G
I
T
A
L
D
I
G
I
T
A
L
Monitoring Audio distribution
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTH300 Handheld Wireless Professional Transmitters
MMaaiinn FFeeaattuurreess
Up to 122 MHz bandwidth in 470/870 MHz range
Enhanced robustness against intermodulation and antenna performances thanks to RF part with pass-
band filter and circulator (optional)
Thin and ergonomics body design
Ultra-light and tough aluminum alloy body
ENR compander system
Battery:
- 2 AA Alkaline or rechargeable NiMH with quick release system
Autonomy: about 11h (50mW with Alk. batteries)
more 14h (10mW with Alk. batteries)
Infrared interface
Easy and quick to setup thru an OLED display
1 joggle selectors and 4 quick setup buttons (level/channel adjustment)
Available also with MCM301/303, premium head (with custom Schoeps capsule)
GGeenneerraall DDeessccrriippttiioonn
MTH300 is an handheld transmitter especially designed for professional wireless microphone applications. It is very easy and quick to use thanks to OLED display and
1 joggle selector and 4 buttons for straight setup of gain and channel. MTH300 benefits also of the latest Wisycom RF technology, it has been especially designed for robustness against noise and inter-modulation (available also with the RF circulator
option).
Wireless power switch
with programmable
LED indication
(green/red).
Open MIC Body:
Unscrew & slide down cover, to
access internal setup controls
and batteries holder & infrared.
Fig. 1 Display & Setup controls Fig. 2 Batteries holder and infrared
Fig. 3 Wireless power switch
Exchange head:
unscrew it counter-clockwise
1
2
1 3
1
NEW CERAMIC COATING
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTH300 Handheld Wireless Professional Transmitters
TTEECCHHNNIICCAALL SSPPEECCIIFFIICCAATTIIOONNSS
1 Switchable channels 320 allocated by 8 groups of 40 channels (in the 470 ÷ 870 MHz range), quickly selectable with dedicated buttons
2 Switching window Up to 122 MHz, depending on band (see below code table)
3 Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability ▪ ± 2,5 ppm (in the rated temperature range) ▪ ± 2.5 kHz (in the rated temperature range)
Temperature range -10 ÷ +55 °C
Max RF power ▪ 50 mW (ERP) when high power selected (note: In some countries high power can be disabled, for local norm!) ▪ 10 mW (ERP) when low power selected (to respect some local norm)
Spurious emissions < 2 nW
Modulation wideband FM, with 50 µs pre-emphasis
Nominal deviation ±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature MTH300 transmits also a digitally modulated sub-carrier, suitable for:
▪ tone-squelch operating ▪ remote battery monitoring ▪ optional PTT (push to talk) operation
AF input connection Directly interchangeable microphone-heads
AF input level -60 ÷ +0 dBu nominal, quickly settable by steps of 2 dB with dedicated buttons
Max. input level +6 dBu
Max sound pressure 150 dB SPL (0,5% THD), with MCM301/MCM302/MCM303/MCM304/MCM305 condenser-heads
Noise-Reduction ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time
AF bandwidth 45 Hz ÷ 21 KHz (3dB) 55 Hz ÷ 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
Signal-to-noise ratio typ. 115 dB (A)rms with 40kHz deviation typ. 121 dB (A)rms with 56kHz deviation
Led Led indication with bicolor led (red & green) on wireless power switch:
▪ Wireless transmission status: GREEN on/off ▪ Battery lifetime status: GREEN - steady (> 25%) - slowly blinking (< 25%) - quickly blinking (<12%)
▪ Modulation peek (if activated): RED ▪ Ptt status: RED if active
Display High contrast OLED (Organic light-emitting diode) display (96 x 36 pixels) 8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
Power supply 2 AA size cell (Alkaline, rechargeable NiMH)
Battery life (alkaline) approx. 11 hours @ 50mW continuous working; up to 14 hours @ 10mW
Dimensions body max. diameter 33 mm (without microphone-head)
total length 183 mm (without microphone-head)
Weight Approx 300g, including battery and MCM301 (condenser) mic-head
Note: The above technical specifications refer to the MTH 300 “transmitter” section. The acoustic specs are relevant
to the microphone-head used. The MTH 300 transmitter complies with ETS 300 422.
OPTION CODE MTH300-Y-Z:
▪ COLOR (-Y)
C body color "champagne"
B body color "matt black"
P body color titanium gray, (ceramic coating)
FREQUENCY RANGE (-Z)
x1 470-566 MHz
x2 518-606 MHz
x3 558-678 MHz
x4 630-750 MHz
x5 700-822 MHz
6 770-870 MHz
EXAMPLE: MTH300 B4 is color matt black, and 630-730 MHz frequency range
Before putting the device into operation, please observe the respective country-specific regulations
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
PTT301 Push to talk ring
PTT301 ring fits between microphone body and capsule and enables PTT functions on
MIC. It is available in a slim (1 cm height) version, or with a 5 cm body (PTT305) to
allow usage of foam windshield. Thanks to this button and our patented technology you can use your wireless
Mic to router your audio feed.
SRE300 Adapter ring
for third party Mic head SRE300 is a slim aesthetical mechanical & electronic adapter that allows using
third party microphone heads with newest Wisycom handheld transmitters MTH30x.
SRE301 Adapter ring
for third party Mic head SRE301 is a slim aesthetical mechanical & electronic adapter that allows using
third party microphone heads with newest Wisycom handheld transmitters
MTH30x.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MCM301 Premium Head with
MCM303 custom Schoeps capsule
Main Features
Custom Schoeps capsule
Oustanding tonal performances
Very smooth frequency response
Unbeatable pop suppression, thanks to a special anti-pop
filter design
MCM301 has a cardiod polar pattern (hypercardioid for MCM303), optimized for rejection on rear-incident sound
Frameless pop filter with stainless-steel micro-mesh
Equivalent Noise DIN/IEC 651 30 dB-A (CCIR 468-3 41 dB)
Max SPL with less 0.5% THD 150 dB
Weight 195 g – Doubled gold contacts for audio signal
Ideal choice for speech and vocalist. Thanks to its custom Schoeps capsule, MCM301 head (cardioid) delivers outstanding tonal performances: its frequency response is very smooth on full 40-20kHz range. Moreover a 2 stages micro-mesh in stainless-steel was especially
designed to achieve unbeatable efficiency in suppressing pop. The polar pattern is a cardiod, optimized for rejection on rear-incident sound. Also available with hypercardioid polar
pattern for MCM303.
idenFig. 1 Display & Setup controls
ardioid polar pattern (MCM303)
10 Hz 20 50 100 200 500 1 kHz 10 20 40 2 5
10
30
20
40
50
0
dB
0 degree
180 degrees
Outer Mesh Stainless steel 0,8mm:
Mech. Resistance
Inner Microporus Foam:
Pop dumping
Dust protection
Middle mesh
Stainless steel 0,39 mm:
Mech. Resistance
Pop Dumping
Antipop micro-Mesh
Stainless steel 30 µm:
Pop Dumping
FRAMELESS construction
to avoid reflections
Custom Schoeps Capsule: Cardioid/Hypercardioid pattern
Special anti-pop filter design
Frequency Response (1m) and polar pattern (MCM301)
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MCM302 Premium Head with
MCM304 Milab capsule (VM44 type)
Frequency Response (1m) and polar pattern (MCM302)
Main Features
Milab VM44 capsule
Oustanding tonal performances
Very smooth frequency response
Unbeatable pop suppression, thanks to a special anti-pop filter design
MCM302 has a cardioid polar pattern (omnidirectional for MCM304), optimized for rejection on rear-incident sound
Frameless pop filter with stainless-steel micro-mesh
Equivalent Noise DIN/IEC 651 30 dB-A (CCIR 468-3 41 dB)
Max SPL with less 0.5% THD 150 dB
Weight 195 g – Doubled gold contacts for audio signal
Outer Mesh
Stainless steel 0,8mm:
Mech. Resistance
Inner
Microporus Foam:
Pop dumping
Dust protection
Middle mesh
Stainless steel 0,39 mm:
Mech. Resistance
Pop Dumping
Antipop micro-Mesh
Stainless steel 30 µm:
Pop Dumping
FRAMELESS construction to
avoid reflections
VM44 Milab Capsule:
Cardioid/Hypercardioid pattern
The ideal choice for speech and vocalist. Thanks to its custom Milab capsule, MCM302 head (cardioid) delivers outstanding tonal performances: its frequency response is very smooth
on full 40-20kHz range. Moreover a 2 stages micro-mesh in stainless-steel was especially designed to achieve unbeatable efficiency in suppressing pop. The polar pattern is a cardiod,
optimized for rejection on rear-incident sound. Also available with omnidirectional polar pattern (MCM304).
idenFig. 1 Display & Setup controls
ardioid polar pattern (MCM303)
Special anti-pop filter design
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTP30 Ultra-lite Wireless Professional Transmitter -D option for DPA microdot connector -L option for LEMO connector
Main Features
Up to 122 MHz bandwidth in 470/870 MHz range
Enhanced robustness against inter-modulation and antenna performances: RF part with pass-band filter and circulator (option)
Miniature design with flexible pcb (no connectors) for extended reliability
Ultra-light metal alloy body (80g without batteries)
ENR compander system
Battery: - 2 AA Alkaline or rechargeable NiMH
Autonomy:
> 10h @ 50mW output power > 14h @ 10mW output power
Infrared interface for management and firmware update
Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
Extended regulation on Mic input gain: 80dB in 2dB step
Max input level 26dBu (15.5 V clipping) to connect directly to mixers
and instruments
General Description
“MTP30 is an extremely small and light pocket transmitter especially designed for professional
wireless microphone applications”
Very easy and quick to use thanks to OLED display and gain/freq button and an easy joggle selector.
MTP30 benefits also of the latest Wisycom RF technology along with an enhanced robustness against noise and inter-
modulation.
Before putting the device into operation, please observe the respective country-specific regulations
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTP30 Ultra-lite Wireless Professional Transmitter
TTEECCHHNNIICCAALL SSPPEECCIIFFIICCAATTIIOONNSS
1 Switchable channels 320 allocated by 8 groups of 40 channels (in the 470 ÷ 870 MHz range), quickly selectable with dedicated buttons
2 Switching window Up to 122 MHz, depending on band (see below code table)
3 Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability ▪ ± 2,5 pap (in the rated temperature range) ▪ ± 2.5 kHz (in the rated temperature range)
Temperature range -10 ÷ +55 °C
Max RF power ▪ 50 mW (ERP) when high power selected ▪ 10 mW (ERP) when low power selected
Spurious emissions < 2 nW
Modulation wideband FM, with 50 µs pre-emphasis
Nominal deviation ±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature MTP30 transmits also a digitally modulated sub-carrier, suitable for:
▪ tone-squelch operating ▪ remote battery monitoring ▪ optional PTT (push to talk) operation
AF input connector
LEMO option
Configurable on „mic‟ display menu in 3 options:
▪ ’2 wires’: gain selectable -40 ÷ +40, no bias voltage ▪ ‘2 wires + bias’: gain selectable -20 ÷ +40, 5.5 V bias voltage (4k7 internal resistance) ▪ ‘3 wires + bias’: gain selectable -20 ÷ +40, 5.5 V bias voltage (4k7 internal resistance)
AF input level 80 dB adjustable range from -60 dBu (775 uV) to 20 dBu (7.75 V) at nominal deviation (1 kHz), adjustable in 2 dB steps
Max. input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction ENR (Wisycom Extended-NR), with independent Attack-time and Recovery-time
AF bandwidth ▪ 45 Hz ÷ 21 KHz (3dB) ▪ 55 Hz ÷ 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
Signal-to-noise ratio ▪ typ. 115 dB (A)rms with 40 kHz deviation ▪ typ. 121 dB (A)rms with 56 kHz deviation
Led Led indication with bicolor led (red & green) on wireless power switch:
▪ Wireless transmission status: GREEN on/off ▪ Battery lifetime status: GREEN - steady (> 25%) - slowly blinking (< 25%) - quickly blinking (<12%)
▪ Modulation peek (if activated): RED ▪ Ptt status: RED if active
Display High contrast OLED (Organic light-emitting diode) bicolor display (96 x 36 pixels) 8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Power supply 2 AA size batteries (Alkaline, rechargeable NiMH)
Battery life
(2 AA alkaline)
▪ approx. 10 hours @ 50mW continuous working
▪ approx. 14 hours @ 10mW continuous working
Dimensions 73 x 61 x 17.5 mm (Height-Width-Depth) without clip
Weight Approx 80 g. without batteries
OPTION CODE MTP30-X-Y-Z:
▪ AUDIO CONNECTOR (-X)
L 3 PIN LEMO CONNECTOR
(use FVB.00.003.NLN on Mic)
▪ COLOR (-Y)
C body color "champagne"
B body color "matt black"
▪ FREQ. RANGE (-Z)
x1 470-566 MHz
x2 518-606 MHz
x3 558-678 MHz
x4 630-750 MHz
x5 700-822 MHz
6 770-870 MHz
EXAMPLE: MTP30 LB4 is 3 pin LEMO connector, color matt black, and 630-730 MHz frequency range
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
ABN00 Active
Groundplane Antenna
AGN00 Groundplane Antenna
The AGN00/ABN000 are
groundplane, vertical polarization omnidirectional antenna.
It comes already pre-tuned in the same frequency switching-window
of the relevant wireless-microphone system.
The antenna is provided with a plug, suitable to assure its easy
and strong mounting directly on a tripod stand or other support with standard
3/8” screw. If necessary, the antenna can be also hanged (upside-down) over the shooting set. For the easy packaging of the antenna, its four elements can
be unscrewed from the base. ABN has also a internal booster to compensate cables loss and powered with +12VDC on the cable.
TECHNICAL SPECIFICATIONS:
Frequencies : VHF 130-250 MHz, UHF 470-870 MHz
Polarization : Vertical.
Radiation : Omnidirectional.
Connector : N type female
Booster Gain: ABN] VHF 14.5 dB, UHF 11.5 dB
Powering : ABN] +12 V, 120 mA (through the output coax cable).
Body size : (diameter) 78 mm max.
Lenght : AGN] 90mm, ABN] 258 mm (fixing plug included).
Weight : AGN] approx 800g, ABN] approx 1.1 kg.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
LBNA UHF WIDEBAND ANTENNA 470-870 MHz
LBNA is a wideband UHF antenna LPDA (log periodic dipole Array). It enhances reception providing approx 6dB gain with a typical beam-width
of 90 degrees.
Antenna Data
Dimension: 319 mm L x 284 mm H x 64 mm H
Material: Epoxy fiberglass (copper – clad) Finishing: Black matte
Mounting: 5/8” Withworth or 3/8” with adapter Weight: 500g
Booster Specifications
Frequency : UHF (470 870 MHz).
Input/output impedance : 50 ohm (SWR = < 1:1.5; typ. = 1:1.4).
Connectors : BNC-female type.
Gain (max) : 015 dB (typical), selectable in step of 1 dB (+/- button).
OIP3 : +43 dBm (Output 3° order Intercept Point) typical.
Gain flatness : 1 dB, in the whole working window.
Powering : +12 V, 100mA+100mA if power input activated.
Typical attenuation of most used coax. cables (for length = 100 m):
Cable type Diameter (mm)
Attenuation @ 400 MHz
Attenuation @ 900 MHz
RG 58 C/U 4.95 32 dB 52 dB RG 213 /U 10.3 13 dB 22 dB RG 218 /U 22.1 7 dB 14 dB
Cellflex - ¼” foam dielectric
8.8 8.4 dB 12.8 dB
MENU/SAVE
GAIN
dB
LOW NOISERF AMPLIFIER
ON/ALARM
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
BAA BROADBAND ANTENNA AMPLIFIER
BAA is wideband antenna booster especially designed to allow using long cables with
broadband wireless receiver system working in 470-870 MHz (TV ch 21/70) thanks
to a very high OIP3 of 40 dBm.
Operation The BAA is powered by the receiver system through the coaxial cable attached to its output
connector, and accordingly the receiver system must have the antenna feeding function.
BEWARE: BAW need 100mA @ 12V to operate and it can feed a further antenna booster
up to 100mA @ 12V.
BAA housing is in ruggedized aluminum, with waterproof sealing (suitable for outdoor
installations):
2 holes for wall-installation (M4 screw type)
Radiofrequency connectors are BNC-Female type:
Input connector, to antenna. it is possible to power up a remote booster (up to
100mA). When input power is active, “INPUT DC BIAS” led is on. If there is fault on
remote booster (i.e. a short circuit) then a L appear on left digit of gain display .
Output connector, to receiver system. BAA is powered thru this connector (100mA
+ 100mA if input powering), if there is a fault (low power) a L appear on right
digit of gain display .
GAIN SETUP
BAW gain can be setup from 0 to 16 dB (typical) using +/- buttons.
A multi-colored (rgb) led will indicate the gain level band and also main alarms.
TECHNICAL SPECIFICATIONS
Frequency : UHF (470 870 MHz)
Input/output impedance : 50 ohm (SWR = < 1:1.5; typ. = 1:1.4).
Connectors : BNC-female type.
Gain (max) : 0 15 dB (typical), selectable in step of 1 dB (+/- button)
OIP3 : +43 dBm (Output 3° order Intercept Point) typical.
Gain flatness : 1 dB, in the whole working window.
Powering thru coax : +12 V, 100mA+100mA ( if power input activated).
Size (L x H x P) : 120mm x 39mm x 24mm
. Typical attenuation of most used coax. cables (for length = 100 m):
Cable type Diameter (mm)
Attenuation @ 400 MHz
Attenuation @ 900 MHz
RG 58 C/U 4.95 32 dB 52 dB
RG 213 /U 10.3 13 dB 22 dB
RG 218 /U 22.1 7 dB 14 dB
Cellflex - ¼” foam dielectric
8.8 8.4 dB 12.8 dB
MEN
U/SAVE
GAIN
dB
LO
W N
OIS
E
RF A
MPLIF
IER
ON
/ALARM
MEN
U/SAVE
GAIN
dB
LO
W N
OIS
E
RF A
MPLIF
IER
ON
/ALARM
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
BAW BROADBAND HIGH POWER ANTENNA AMPLIFIER
BAW is wideband antenna booster especially designed to allow long cables wirings and full broadband wireless receiver systems. It comes in two versions:
- BAW-L working in 470-670 MHz (TV ch 21/45); - BAW-H working in 630-870 MHz (TV ch 41/70).
Operation The BAW is powered by the receiver system through the coaxial cable attached to its output connector, and accordingly the receiver system must have the antenna feeding function. BEWARE: BAW needs 600mA @ 12A to operate and it can feed a further antenna booster up to 250mA @ 12V (in
this case the overall current supplied must be at least 850mA). BAW housing is in ruggedized aluminum (nickel plated), with waterproof sealing (suitable for outdoor installations):
4 holes for wall-installation (M4 screw type) 173mm X 60mm. Radiofrequency connector are N-Female type:
Input connector (0), powered through antenna. Pushing button (2) it is possible to power up a remote booster (up to 250mA). When input power is active, “INPUT DC BIAS” led is on. If there is a fault on remote booster (i.e. a short circuit) then a L appears on the left digit of gain display (3).
Output connector (5), feeding a receiver system. BAW is powered thru this connector (600mA + 250mA if input powering), if there is a fault and there is not enough power to properly operate then a L appears on the right digit of gain display (3).
GAIN SETUP BAW gain can be setup from 0 (relay bypass) to 22 dB (typical) using +/- buttons (4). With a long push (2 sec) + or – buttons, BAW enters in edit mode: display blinks and with short push it is possible to setup the desired gain.
Once finished a long push either on + or – will exit the edit mode. BEWARE: to avoid any overload of the receiver system even with very strong RF signals, you must carefully compensate the loss of the cable (see the chart below) with the gain of the BAW, without exceeding a total gain of max. 3 dB.
TECHNICAL SPECIFICATIONS
Frequency : a window in one of following ranges: BAW-L UHF (470 670 MHz)
BAW-H UHF (630 870 MHz)
Input/output impedance : 50 ohm (SWR = < 1:1.5; typ. = 1:1.4). Connectors : N-female type.
Gain (max) : 0 22dB (typical), selectable in step of 1 dB (+/- button)
When 0 dB is selected then RF feed is by-passed (relay) When BAW is not powered then RF feed is by-passed (relay) OIP3 : +47 dBm (Input 3° order Intercept Point) typical. Gain flatness : 1 dB, in the whole working window.
Powering : +12 V, 600mA + up 250mA (*) (thru output coax. Cable)
(*) if power input activated. Size (L x H x P) : 193mm x 80mm x 34mm (173mm x 60mm fasten holes). Weight : 650 g approx.
Typical attenuation of most used coax. cables (for length = 100 m):
Cable type diameter
mm attenuation @ 400 MHz
attenuation @ 900 MHz
RG 58 C/U 4.95 32 dB 52 dB
RG 213 /U 10.3 13 dB 22 dB
RG 218 /U 22.1 7 dB 14 Db
Cellflex - ¼” foam dielectric
8.8 8.4 dB 12.8 Db
INPU
T
50 O
hm
RF +
DC
BIAS
OU
TPU
T
50
RF +
DC
12V 6
00m
A
Use M4 type screws
Antenna Output Cable to Rx’s
Powering: 600mA + 250mA(*) (*) If powering input
Powering: 250mA(*) (*) If powering input
4. Gain setup button (+/-)
2. Powering Input button
3
1 2
3
1
1
2
3
1
4
1
2
3
1
5
4
1
2
3
1
0
4
1
2
3
1
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
1 2 3
BROADBAND SPLITTERS
SPL 214AW UHF ANTENNA SPLITTER ACTIVE WIDEBAND (2 X 1 IN 4 OUT)
SPL 218AW UHF ANTENNA SPLITTER ACTIVE WIDEBAND (2 X 1 IN 8 OUT)
Front Panel SPL 214AW and SPL 218W
Back Panel SPL 214AW
Back Panel SPL 218AW
1) ON/OFF SWITCH: Two position button to switch on the splitter (a green LED lights up)
2) “POWER SOURCE INDICATION”: It indicates active power source, either DC or AC (yellow LED)
3) “ANTENNA BOOSTER” SWITCH: two switches to activate independently remote antenna booster power up: +12Vcc / 700mA (a yellow LED indicate booster activity on relative antenna).
Booster circuit is protected by self re-settable fuse.
4) POWER SUPPLY: ● VAC IEC C14 chassis plug (fuse protected T2A) ● VDC XLR-4 Male (self-reset fuse protected)
[ +V = pins 2 + 4; -V and ground = pins 1 + 3 ]
5) ANTENNA INPUTS: A and B inputs on N-female connector. Input connectors can supply antenna
booster with +12Vcc / 700mA MAX when antenna booster switch is on (see 3.)
6) ANTENNA OUTPUT: ● SPL214AW A e B output (4 + 4) BNC-Female.
● SPL218AW A e B output (8 + 8) BNC-Female.
TECHNICAL DATA: Power supply : AC connector 90÷264Vac / T2A, 47÷63Hz
: DC connector 10÷ 16 VDC (with self re-settable fuse) Working frequency : 470 880 MHz
Amplifier linearity : 1 dB (typical).
Impedance : 50 ohm.
Input/Output Gain : +2 dB (typical).
OIP3 : +38 dBm (3rd Order Intercept Point).
Antenna booster powering : +12Vcc / 700mA MAX (for each N-female input connector A & B) . Dimension : Standard rack 19” / 1U.
Weight : ● SPL214AW 3,7 kg
● SPL218AW 3,8 kg.
6 5 4
A C
DC
A NTENNA BO O STER
DC-OUT
700mA MAX
DC-OUT
700mA MAX
~
SPL214AW
ANTENNA INPUTS SPLITTER OUTPUTS
DC-OUT
700mA MAX
DC-OUT
700mA MAX
SPLITTEROUTPUTS
ANTENNA INPUTS~
SPL218AW
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
BROADBAND PROGRAMMABLE COMBINER/MATRIX
MAT243 UHF WIDEBAND MATRIX COMBINER (2 X 4 IN 3 OUT COMBINED)
MAT283 UHF WIDEBAND MATRIX COMBINER (2 X 8 IN 3 OUT COMBINED)
Back Panel MAT243
Back Panel MAT283 1.POWER SUPPLY: ▪ VAC IEC C14 chassis plug (fuse protected T2A) ▪ VDC XLR-4 Male (self-reset fuse protected) [ +V = pins 2 + 4; -V and ground = pins 1 + 3 ] 2. EXTERNAL ALARMS: ▪ 8 x GPIO INPUT opto-coupled connected to a common float ground and with a 5V PWR ▪ 3 x GPIO OUTPUT opto-relays normally open (max 80V) with max 100mA sinking NC. 3. ANTENNA OUTPUTS: A and B outputs on N-female connector. Output is combinations of 3 channels, local selected using
front panel switch or remotely with usb or with ethernet (if ethernet option ETH950 is present). 4. ANTENNA INPUTS: ▪ MAT243 A e B diversity input (4 + 4) BNC-Female ([email protected] on 3 active input) ▪ MAT283 A e B diversity input (8 + 8) BNC-Female ([email protected] on 3 active input) TECHNICAL DATA:
Power supply : AC connector 90÷264Vac / T2A, 47÷63Hz : DC connector 10÷ 16 VDC (self re-set. fuse)
Working frequency : 470 880 MHz
Amplifier linearity : 1 dB (typical).
Impedance : 50 ohm.
Input/Output Gain : 2 dB or +9 dB with option 9dB.
OIP3 : +45 dBm (3rd Order Intercept Point).
Input separation : 70 dB (typical)
Antenna booster powering : +12Vcc / 200mA MAX.
Dimension : Standard rack (aluminum) 19” / 1U.
Weight : ▪ MAT243 4,4 kg ▪ MAT283 4,9 kg. FUNCTIONAL DRAW (example):
4 3 1 2
STUDIO2 STUDIO4 LOBBY EXT 2
A4
B4
A2
B2
A3
B3
A1
B1
A5
B5
A6
B6
A7
B7
A8
B8
EXT 1 STUDIO3 STAGE
BROADBAND
470 – 870 MHz
STUDIO1
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
EXAMPLE OF TRUE BROADBAND INSTALLATION: Latest Wisycom technology allowed a true broadband distribution, reducing the number or cable and antennas.
BAW allow distribution up to 200/250m of cable in the full 470MHz bandwidth. Splitter and matrix allow a radiofrequency routing that way that in any control room it is possible to receive any studio (up 3 at a time). The matrix (routing) can be setup locally or managed remotely with a ethernet connection. MRK920 and MRK950 allow a high quality reception and an incredible audio flexibility (digital output, digital companding, remote monitoring. Your wireless infrastructure is NOW even more robust and flexible than a wired one!!!
REAL INSTALLATION: CANAL+ HEADQUARTER PARIS (2008) In this case 8 studios are managed with a remotable matrix and overall are used up to 80 channels. From studio to regie it is possible to have 400/450m! This is an extreme case that gives you a clue of the robustness and flexibility of our technology!
SPL214AW
BAW WIDEBAND BOOSTER OIP3 47dBm 0-22 GAIN Equalized
SPL214AW
STUDIO 1
STUDIO 2
SPL214AW STUDIO 3
SPL214AW STUDIO 4
MAT243A
MAT243A
MAT243A
MAT243A
REGIE AUDIO 1
REGIE AUDIO 2
REGIE AUDIO 3
REGIE AUDIO 4
KEY FEATURES TRUE BROADBAND DISTRIBUTION (470 MHz)
ABSOLUTE IMMUNITY TO INTERMODULATION +47 dBm OIP3
HIGH SENSITIVITY RECEIVERS
BROADBAND RECEIVERS 250 MHz
MATRIX FULLY CONFIGURABLE EACH REGIE WITH EACH STUDIO EACH REGIE WITH UP TO 3 STUDIOS
MATRIX REMOTABLE (ETHERNET/USB)
REMOTE CONTROL (ETHERNET) SPL214AW
STUDIO’S AREA
DISTRIBUTION ROOM
AUDIO/MIXER CONTROL
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MCR42 DUAL TRUE DIVERSITY CAMERA RECEIVER
Main Features
Dual True Diversity Receiver
Up to 240 MHz bandwidth
MCR42-L: 470-700 MHz MCR42-H: 590-822 MHz
DSP digital audio treatment for
multi-compander compatibility
Analogue and digital AES3 outputs
Audio Monitor on 3.5” Jack connector
Infrared interface for programming
and transmitter synchronization
Easy setup and operation thru a OLED display
General Description MCR42 is dual true diversity receiver especially designed for broadcaster ENG
application. It is very easy to use thanks to an OLED
display and 4 front LEDs for continuous
RF power and status indications. MCR42 can work in a 240 MHz bandwidth as
ideal companion for the MTH300 and MTP30 Wisycom transmitter.
Infrared interfaces, digital/analogue audio outputs and monitor plug make it
the most versatile working instrument to cope with nowadays difficult frequency
environments.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTK952/W DIGITAL STEREO TRANSMITTER
Main Features
330 MHz switching window: 470-800 MHz
Direct Digital Synthesis of MONO/MPX stereo signal for great
sound and very high stereo separation (70 dB)
Completely programmable Noise Reduction System (compander)
for multivendor compatibility
40bit DSP core for very low delay < 0.7 ms
Power adjustable from 10mW to 1W (/W option)
Programmable peak deviation up to 75 kHz
General Description MTK952 twin stereo transmitter is designed for professional wireless monitoring applications. A switching bandwidth of 330 MHz on 2000
memorized channels, a digital mono/mpx stereo synthesis for great stereo separation (>70 dB), a digital programmable companding for multivendor
compatibility and a power up to 1watt are its main unique features that give the highest flexibility.
PREVIEW
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice