4
STORAGE EXTRACTION DOSING TRANSFER INTRODUCTION member of DOSEAHORSE MAKE DIFFICULT ALTERNATIVE FUELS EXTRACTION & DOSING EASY !

MaKe DifficULt aLternatiVe fUeLS extraction & DoSing eaSY · aLternatiVe fUeL - Flow rate: from 10 to 250 m3/h - Grain size of alternative fuel: from 1 to 500 mm - Density of alternative

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: MaKe DifficULt aLternatiVe fUeLS extraction & DoSing eaSY · aLternatiVe fUeL - Flow rate: from 10 to 250 m3/h - Grain size of alternative fuel: from 1 to 500 mm - Density of alternative

S t o r a g e e x t r a c t i o n D o S i n g t r a n S f e r i n t r o D U c t i o n

member of

DoSeaHorSeMaKe DifficULt aLternatiVe fUeLSextraction & DoSing eaSY !

Page 2: MaKe DifficULt aLternatiVe fUeLS extraction & DoSing eaSY · aLternatiVe fUeL - Flow rate: from 10 to 250 m3/h - Grain size of alternative fuel: from 1 to 500 mm - Density of alternative

S t o r a g e e x t r a c t i o n D o S i n g t r a n S f e r i n t r o D U c t i o n

> DoSeaHorSe

MateriaL fLexiBiLitY, HigH reLiaBiLitY & accUrate DoSing !

> aPPLicationS

automatic adjustable calibrator

continuous feeding via hopper

Metallic apron withrubber belt sealing

Load cells

4 load cells located belowthe machine :- for measuring the product

quantity in the hopper- for doing an auto calibration

of the dosing system

Spike roller for smoothmaterial dispatching

Weighing systemwith belt scale

reclaimer systemfor spillage

Being close tothe feeding pointfor a betterdosing reactivity

Flow separationin PHT with2 independentdosing units

iMPLantation in Pre-Heater toWer (PHt)

Page 3: MaKe DifficULt aLternatiVe fUeLS extraction & DoSing eaSY · aLternatiVe fUeL - Flow rate: from 10 to 250 m3/h - Grain size of alternative fuel: from 1 to 500 mm - Density of alternative

Shredded tires30 - 200 mmd = 0,45 t/m3

Municipal waste50 - 400 mmd = 0,3 - 0,6 t/m3

rice husk1 - 10 mmd = 0,15 t/m3

cashew nut shells20 - 40 mmd = 0,2 t/m3

car lamps50 - 500 mmd = 0,15 - 0,2 t/m3

rDf20 - 300 mmd = 0,1 - 0,3 t/m3

coconuts shells50 - 250 mmd = 0,25 t/m3

Wood pieces1 - 500 mmd = 0,2 - 0,4 t/m3

> DoSeaHorSe

MateriaL fLexiBiLitY, HigH reLiaBiLitY & accUrate DoSing !

> aLternatiVeSoLiD fUeLS

WaSteto energY

> aDVantageS

> PerforMance

> tranSPort

Flow seperationfor multiple transferinglines with a continuous feeding & dosing

extraction WitH SiMULtaneoUS LoaDing

- Doseahorse extractor comes witha hopper (up to 9 m³ buffer) insuring constant output and maintained dosing accuracy, even with irregular input.

- The extractor rests on 4-load cellsmonitoring the weight of materialinside hopper.

SeLf caLiBration

- Weight are delivered along with the machine for dosing belt calibrationand commissioning.

- While in operation, a self-calibrationcan be done by comparing the lossof weight from hopper (load cellsbelow extractor) and the measuredoutput of the dosing belt.

Doseahorses are deliveredto site in preassembledconditions in one container only,along with it’s aggregates.

HigH fLoW rateanD fLexiBiLitYfor YoUraLternatiVe fUeL

- Flow rate: from 10 to 250 m3/h

- Grain size of alternative fuel: from 1 to 500 mm

- Density of alternative fuel:from 0,1 to 1,5 t/m³

accUrate DoSing

- Alternative fuel accurate dosingis managed with a belt scale measuring the quantity of material on it.

- Metallic apron speed variation linkedin closed loop with belt scale ensures constant flowrate.

PreaSSeMBLeD MacHineS

- Doseahorses are fully mountedand tested in our workshop.

- Erection and commissioning timeis reduced thanks to Ready-to-install concept.

Loading withpay loadermanuallypossible

0,1 1,5Density (t/m3)

0 500Grain size (mm)

10 250Flow rate (m3/h)

iMPLantation on tHe groUnD

Page 4: MaKe DifficULt aLternatiVe fUeLS extraction & DoSing eaSY · aLternatiVe fUeL - Flow rate: from 10 to 250 m3/h - Grain size of alternative fuel: from 1 to 500 mm - Density of alternative

S t o r a g e e x t r a c t i o n D o S i n g t r a n S f e r i n t r o D U c t i o n

member of

© 0

2.20

17

A A

A-A

MA

TERIAL HANDLIN

G

S I N C E 1 8 6 6

ATS Group - Walter Mater ia ls handl ing56 rue du Pâturage68200 Mulhouse - FrancePhone +33 389 32 47 00 [email protected]

> tecHnicaL inforMationS

Your worldwide experience partner offers you:

> High qual i ty equipment for safe burning> Complete solut ions for a l ternat ive fuels systems> Secur i ty and l iabi l i ty in a l l the process

Reactions Permanent loads (kN)Additional product load (kN)with a full hopper (9 m³ - product density: 1)

R1 27 18

R2 28 18

R3 18,5 27

R4 18,5 27